Order 8100.18A Aircraft Certification Service Organizational Realignment and Refinement References
This order provides information on using existing Aircraft Certification Service (AIR) directives, advisory circulars (ACs), policy statements, policy memorandums, technical standard orders (TSOs), and quality management system (QMS)documents after AIR’s 2023 refinement. This order is intended to maintain the continuity of current practices and does not establish new policy.
This document is cancelled. Cancelled by 8100.18B. Check the official source before relying on it.
5. Background.
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
ORDER
8100.18A
National Policy Effective Date: 09/29/2023
SUBJ: Aircraft Certification Service Organizational Realignment and Refinement References
1. Purpose of this Order. This order provides information on using existing Aircraft Certification Service (AIR) directives, advisory circulars (ACs), policy statements, policy memorandums, technical standard orders (TSOs), and quality management system (QMS) documents after AIR’s 2023 refinement. This order is intended to maintain the continuity of current practices and does not establish new policy.
2. Audience. All FAA personnel, delegated organizations, and designees.
3. Where Can I Find This Order? You can find this order on the Federal Aviation Administration (FAA) website at https://www.faa.gov/regulations policies/orders notices and on the Dynamic Regulatory System (DRS) website at https://drs.faa.gov.
4. What this Order Cancels. FAA Order 8100.18, Aircraft Certification Service Organizational Realignment References, dated June 27, 2017.
5. Background. In the summer of 2017, AIR realigned from an organization in which directorates were responsible for certain types of products (transport airplanes, small airplanes, rotorcraft, and engines and propellers) to an organization comprised of divisions responsible for specific safety functions. This was a first step toward realizing the 2017 Blueprint for AIR Transformation, with anticipated refinements expected. In subsequent years, each functional division underwent minor refinements to organizational structure.
a. On April 9, 2023, AIR further refined its organizational structure to align with the original vision for AIR transformation and the Aircraft Certification Safety and Accountability Act of 2020. In this functionally aligned organization, many offices retained their roles and responsibilities but were re-aligned within one of the new divisions and assigned a new organizational identifier (code). In addition, new offices were created.
Distribution: Electronic Initiated By: AIR-600
6. Using Policy, Guidance, and Standards after AIR’s 2023 refinement.
09/29/2023 8100.18A
b. FAA Order 8100.5E, Aircraft Certification Service – Organizational Structure and Functions, describes AIR’s functional divisions and staff offices, identified as:
(1) Executive Staff Office, AIR-10.
(2) Senior Technical Experts Staff Office, AIR-20.
(3) International Office, AIR-40.
(4) Safety & Performance Integration (S&PI) Division, AIR-300.
(5) Integrated Certificate Management (ICM) Division, AIR-500.
(6) Policy & Standards (P&S) Division, AIR-600.
(7) Compliance & Airworthiness (C&A) Division, AIR-700.
(8) System Oversight (SO) Division, AIR-800.
(9) Enterprise Business Operations (EBO) Division, AIR-900.
6. Using Policy, Guidance, and Standards after AIR’s 2023 refinement. If an existing policy, guidance, or standard references the directorate structure, the document remains applicable. This order contains information, specified in five appendices, to assist in using such documents in the functional divisions.
a. Appendix A contains organizational charts that depict how the organization is structured.
b. Appendix B contains a list of each office’s organizational code under the directorate- based organization and their corresponding office code under the realigned and refined organization.
c. Appendix C contains a list of AIR orders, ACs, policy statements, policy memorandums, TSOs, and QMS documents that were reviewed to evaluate the use of organizational titles as we continue to update documents for the transition to s functional organization. Documents listed in appendix C with bold text require additional clarification beyond what is provided in paragraph 6(f), which is provided in appendix D.
d. Appendix D provides additional clarification for AIR orders, ACs, policy statements, policy memorandums, TSOs, and QMS instructions listed in appendix C with bold text because they require additional clarification beyond what is provided in paragraph 6(f).
e. Appendix E contains the information technology (IT) tools that were evaluated. New organizational codes are being integrated into the IT applications where appropriate. Continue to use these IT tools using the existing organizational codes if necessary and per IT system program manager guidance.
09/29/2023 8100.18A
f. For all documents in appendix C, until next revision or change to noted documents:
(1) Substitute any reference to an organizational code with the corresponding organizational code in the functional division as defined in appendix B.
(2) All references to directorate or standards staff responsibilities not mentioned in paragraphs (3) or (4) are replaced and understood to mean the P&S Division.
(3) All references to directorate product/geographic areas of responsibility related to Manufacturing Inspection Office (MIO), Manufacturing Inspection District Office (MIDO), or manufacturing field office, Manufacturing Inspection Satellite Office (MISO), Certificate Management Office (CMO), Certificate Management Unit (CMU) are replaced and understood to mean the SO Division, or ICM Division when referring to its assigned products.
(4) All references to areas of responsibility related to Military Certification Office (MCO) are replaced and understood to mean Military Certification Branch (MCB).
(5) All references to directorate product/geographic areas of responsibility related to Aircraft Certification Office (ACO) or aircraft certification field office, or the Delegation Systems Certification Office (DSCO) are replaced and understood to mean the C&A Division, or ICM Division when referring to its assigned products.
(6) Refer production or airworthiness issues that require a directorate manager action to the SO Division Director or ICM Division Director for assigned products.
(7) Refer design approval and continued operational safety responsibilities, including issues that require a directorate manager or assistant directorate manager action to the C&A Division Director or as applicable to the ICM Division Director, and their deputies, respectively, within their delegated authorities.
(8) Refer enforcement activity requiring directorate manager action to the division director of the enforcement’s originating office.
(9) Refer oversight activity requiring directorate manager action to the division director of the oversight activity’s originating office.
(10) Replace all references to the Director of AIR with the Executive Director of AIR.
(11) All references to the Transport Airplane Directorate, the Small Airplane Directorate, the Rotorcraft Directorate, the Engine and Propeller Directorate, or the Design, Manufacturing & Airworthiness Division in the context of regulations (including special conditions, exemptions, etc.) and policy (including issue papers, equivalent level of safety findings, etc.) are replaced and understood to mean the P&S Division.
(12) All references to Boeing Aviation Safety Oversight Office (BASOO), Boeing CMO, and Engine Certification Office (ECO), are replaced and understood to mean the ICM Division.
09/29/2023 8100.18A
(13) All references to Aircraft Evaluation Group (AEG) are replaced and understood to mean Aircraft Evaluation Division (AED). Any references to Flight Standards (FS) Division, AIR Transportation Division, and flight standards field facilities are understood to mean the cognizant FS office.
(14) All references to international field offices in Brussels and Singapore are replaced and understood to mean the AIR-40 International Office.
(15) All references to historical headquarters divisions are replaced and understood to mean the six divisions: S&PI Division (AIR-300), ICM Division (AIR-500), P&S Division (AIR-600), C&A Division (AIR-700), SO Division (AIR-800), EBO Division (AIR-900) and four staff offices: Office of the Executive Director (AIR-1) and Deputy Executive Director (AIR- 2), Executive Staff Office (AIR-10), Senior Technical Experts Staff Office (AIR-20), and International Office (AIR-40).
(16) For references created after 2017 but before the 2023 refinement organizational change: all references to the following divisions under realignment: Organizational Performance Division, AIR-300 is replaced by the S&PI Division (AIR-300); International Division, AIR-400 is replaced by the International Office (AIR-40); Policy and Innovation (P&I) Division, AIR-600 is replaced by the P&S Division (AIR-600); and Enterprise Operations (EO) Division, AIR-900 is replaced by the EBO Division (AIR-900).
g. When an issue requires involvement of more than one division director, the affected division directors must agree on one division director as the responsible division director. Coordination between the affected divisions is required; however, only the identified responsible division director needs to sign any related documents.
h. All references to regional legal counsel will continue to remain valid as their offices are not part of AIR or the realignment.
7. Suggestions for Improvement. Please forward all comments on deficiencies, clarifications, or improvements regarding the content of this order to the AIR Directives Management Officer (DMO) email box via email at [email protected] or the FAA DRS at https://drs.faa.gov. FAA Form 1320-19, Directive Feedback Information, is in appendix F of this order for your convenience.
Digitally signed by DANIEL J. ELGAS Date: 2023.09.25 11:13:57 -04'00' DANIEL J. ELGAS
Daniel J. Elgas Director, Policy and Standards Division Aircraft Certification Service
09/29/2023 8100.18A Appendix A
Appendix A. Figure A-1: Refined Aircraft Certification Service Organization
Office of the Executive Director
AIR-1
and Deputy Executive Director
AIR-2
AIR-10 Executive Staff
Office
AIR-20 Sr. Technical Experts Staff
Office
AIR-40 International
Office
AIR-300 Safety & Performance
Integration Division
AIR-700 Compliance &
Airworthiness
Division
AIR-600 Policy & Standards
Division
AIR-500 Integrated Certificate
Management
Division
AIR-800 System Oversight
Division
AIR-900 Enterprise Business Operations Division
09/29/2023 8100.18A Appendix A
Figure A-2: Office of the Executive Director Staff Offices with Branches
AIR-40 International Office
AIR-41 Integration &
Performance
Branch
AIR-42 International
Engagement
Branch
Division Support International Field
Representatives
AIR-10 Executive Staff Office
AIR-11 Executive Support Branch
AIR-12 Engagement & Outreach Branch
AIR-20 Senior Technical Experts Staff Office
09/29/2023 8100.18A Appendix A
Figure A-3: Safety & Performance Integration Division
AIR-320 Program Integration Branch
AIR-321 Program Management Section
AIR-340 Safety & Performance Data Branch
AIR-341 Data Analytics Section
AIR-342 Data & Technology Governance
Section
AIR-343 Data Management Section
AIR-322 Project Management Section
AIR-360 Safety Programs Branch
AIR-361 State Safety Program Section
AIR-362 Incident Response Section
AIR-300 Safety & Performance Integration Division Support Chart Colors Legend
Division/Office
Branch
Section
Unit
09/29/2023 8100.18A Appendix A
Figure A-4: Integrated Certificate Management Division
AIR-500 Integrated Certificate
Management
AIR-520 Continued Operational Safety (COS)
Branch
AIR-522 Airframe
Section
AIR-523 Systems Section
AIR-525 Engine & Propulsion
Section
AIR-510 Certification
Program Management
Branch
AIR-570 Certification
Branch
Division
Support
AIR-580 System Operation
& Oversight
Branch
AIR-540 Integration &
Performance
Branch
AIR-581 Performance & Planning Section
AIR-582 Airplane Oversight
Section
AIR-585 Engine & Propulsion
Section
AIR-583 Supplier Systems Section
AIR-571 Production Section
AIR-572 Airframe & Cabin
Safety Section
AIR-573 Mechanical Systems
Section
AIR-575 Engine & Propulsion
Section
AIR-576 Avionics & Electrical
Systems Section
Chart Colors Legend Division/Office
Branch
Section
Unit
09/29/2023 8100.18A Appendix A
Figure A-5: Policy & Standards Division
Chart Colors Legend
Division/Office
Branch
Section
Unit
AIR-625 Engine & Propulsion
Section
AIR-622 Airframe Section
AIR-621 Flight Test & Human
Factors Section
AIR-626 Avionics & Electrical Systems Section
AIR-630 Organization & System Policy Branch
AIR-610 Certification Engagement
Branch
AIR-620 Technical Policy Branch
AIR-640 Integration &
Performance
Branch
AIR-641 Project Mgmt.
Section
AIR-643 Business Operations
Section
AIR-631 Design & Maintenance Systems Section
AIR-632 Production & Airworthiness
Section
AIR-633 Continued Operational
Safety Systems
Section
AIR-634 System Oversight
& Delegation
Section
AIR-626A
Electrical Systems Unit
AIR-646 Technical
Writing Section
AIR-624 Cabin Safety
Section
AIR-626C
Avionics Communication &
Surveillance Unit
AIR-650 GA Alt Fuels Office
AIR-623 Mechanical Systems
Section
AIR-600 Policy & Standards Division Support
AIR-613 Certification Coordination
Section
AIR-611 Emerging Technology Coordination
Section
AIR-626B Avionics Navigation & Flight Deck Unit
AIR-621A Performance & Environment Unit
AIR-621B Human Factors Unit
AIR-626D Avionics Software & Components Unit
AIR-627 System Safety
Assessment
Section
AIR-628 Cybersecurity
Section
AIR-645 Consensus
Standards
Mgmt. Section
AIR-62A Product Policy Management: Transport Airplanes & Engines Section
AIR-62B Product Policy Management: GA Airplanes, Rotorcraft & Emerging Aircraft Section
AIR-63A Product Policy Management: Systems
Standards Section
09/29/2023 8100.18A Appendix A
Figure A-6: Compliance & Airworthiness Division
AIR-700 Compliance & Airworthiness Division Support Flight Test Safety
Officer
AIR-710 Flight Test & Human
Factors Branch
AIR-720 Operational Safety
Branch
AIR-730 International Validation Branch
AIR-740 Integration and Performance Branch
AIR-750 East Certification
Branch
AIR-760 Central Certification
Branch
AIR-770 West Certification
Branch
AIR-780 Military Certification
Branch AIR-741
Project Management Section
AIR-742 Process & Technical Standardization Section
AIR-743 Business Operations
Section
AIR-744 Safety & Performance
Analytics Section
AIR-711 East Section
AIR-712 Central Section
AIR-713 West Section
AIR-714 Policy & Standards
Section
AIR-722 COS Program
Management
Section
AIR-723 Fleet Safety Section
AIR-731 Europe, Middle
East & Africa
Section
AIR-732 Americas
Section
AIR-733 Asia Pacific
Section
AIR-757 Program Management
Section
AIR-752 Airframe Section
AIR-753 Mechanical Systems Section
AIR-754 Cabin Safety
Section
AIR-755 Engine & Propulsion
Section
AIR-756 Avionics & Electrical
Systems Section
AIR-778 Alaska Aviation
Section
AIR-751 Administrative Support Section
AIR-767 Program Management
Section
AIR-762 Airframe Section
AIR-763 Mechanical Systems Section
AIR-764 Cabin Safety
Section
AIR-765 Engine & Propulsion Section
AIR-766 Avionics & Electrical Systems
Section
AIR-761 Administrative Support Section
AIR-777 Program Management
Section
AIR-772 Airframe Section
AIR-773 Mechanical Systems Section
AIR-774 Cabin Safety
Section
AIR-775 Engine & Propulsion
Section
AIR-776 Avionics & Electrical
Systems Section
AIR-771 Administrative Support Section AIR-721 Airworthiness Products Section
Chart Colors Legend
Division/Office
Branch
Section
Unit
AIR-721A Publications Unit
09/29/2023 8100.18A Appendix A
Figure A-7: System Oversight Division
AIR-800 System Oversight Division Support
AIR-870 West Certificate Management Branch
AIR-860 Central Certificate Management
Branch
AIR-871 Scottsdale Certificate Management Section
AIR-872 Seattle Certificate Management Section
AIR-873 Los Angeles
Certificate Management Section
AIR-861 Oklahoma City
Certificate Management Section
AIR-862 Ft Worth Certificate Management Section
AIR-863 San Antonio Certificate
Management Section
AIR-840 Integration &
Performance
Branch
AIR-850 East Certificate Management
Branch
AIR-841 Project Management
Section
AIR-842 Process & Technical
Standardization
Section
AIR-843 Business Operations
Section
AIR-844 Safety & Performance Analytics Section
AIR-851 Bradley Certificate Management Section
AIR-853 Atlanta Certificate Management Section
AIR-854 New Cumberland
Certificate Management Section
AIR-855 Farmingdale
Certificate Management Section
AIR-856 Orlando Certificate Management Section
AIR-864 Minneapolis
Certificate Management Section
AIR-865 Wichita Certificate Management Section
AIR-866 Vandalia Certificate Management Section
AIR-857 Program Management Section
AIR-877 Program Management Section AIR-867 Program Management Section
AIR-852 Boston Certificate Management Section
Chart Colors Legend
Division/Office
Branch
Section
Unit
09/29/2023 8100.18A Appendix A
Figure A-8: Enterprise Business Operations Division
AIR-900 Enterprise Business Operations Division Support
AIR-910 Operations Support Branch
AIR-920 Financial & Contracts
Services Branch
AIR-930 Workforce Management
Branch
AIR-940 Workforce Development Branch
AIR-950 Technology Management
Branch
AIR-912 Outreach Services Section
AIR-913 Operations & Project
Services Section
AIR-921 Budget Services Section
AIR-922 Contract Services
Section
AIR-931 Workforce Engagement
Section
AIR-932 Workforce Solutions
Section
AIR-951 Technology Services
Section
AIR-952 Technology Systems
Section
AIR-914 Business Resource Section
AIR-941 Training Management
Section
AIR-942 Training Development
Section
AIR-943 Training Delivery & Systems
Section
Chart Colors Legend
Division/Office
Branch
Section
Unit
09/29/2023 8100.18A Appendix B
Appendix B. Office Cross Reference Index
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ACE-100M – Military Certification Office AIR-7G0 – MCO Branch AIR-780 – Military Certification Branch
ACE-102W – Continued Operational Safety Branch AIR-7K1 – Continued Operational Safety Section AIR-760 – Central Certification Branch ACE-103 – Technical & Administrative Support Staff
AIR-990 – Central Technical & Administrative Support
Branch
AIR-910 – Operations Support Branch ACE-110 – Standards Office AIR-690 – Small Airplane Standards Branch AIR-620 – Technical Policy Branch
ACE-111 – Regulations & Policy Branch AIR-691 – Regulations & Policy Section AIR-620 – Technical Policy Branch
ACE-112 – Project Support Branch AIR-692 – Project Support Section Project officers: AIR-610 – Certification Engagement Branch, Technical Policy: AIR-620 – Technical Policy Branch Technical Writers: AIR-646 Technical Writing Section ACE-113 – Continued Operational Safety AIR-693 – Continued Operational Safety Section AIR-630 – Organization & System Policy Branch ACE-114 – Programs & Procedures Branch AIR-694 – Programs & Procedures Section AIR-620 – Technical Policy Branch
ACE-115A – Atlanta Aircraft Certification Office AIR-7A0 – Atlanta ACO Branch AIR-750 – East Certification Branch
ACE-115C – Chicago Aircraft Certification Office AIR-7C0 – Chicago ACO Branch AIR-760 – Central Certification Branch
ACE-115N – Anchorage Aircraft Certification Office
AIR-770 – Anchorage ACO Branch AIR-778 – Alaska Aviation Section
ACE-115W – Wichita Aircraft Certification Office AIR-7K0 – Wichita ACO Branch AIR-760 – Central Certification Branch
ACE-116A – Flight Test Branch AIR-712 – Southeast Section AIR-711 – East Section
ACE-116C – Airframe & Administrative Branch AIR-7C1 – Airframe & Administrative Services Section AIR-760 – Central Certification Branch ACE-116W – Mechanical Systems & Propulsion Branch
AIR-7K2 – Mechanical Systems & Propulsion Section AIR-760 – Central Certification Branch ACE-117A – Airframe Branch AIR-7A1 – Airframe Section AIR-750 – East Certification Branch
ACE-117C – Systems & Flight Test Branch
(Systems Personnel)
AIR-7C2 – Systems Section AIR-760 – Central Certification Branch ACE-117C – Systems & Flight Test Branch (Flight
Test Personnel)
AIR-713 – Southwest Section AIR-712 – Central Section
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ACE-117W – Flight Test Branch (Program
Management Personnel)
AIR-7K5 – Program Management Section AIR-760 – Central Certification Branch ACE-117W – Flight Test Branch (Flight Test Personnel)
AIR-714 – Central Section AIR-712 – Central Section
ACE-118A – Propulsion & Services Branch AIR-7A2 – Propulsion & Services Section AIR-750 – East Certification Branch
ACE-118C – Propulsion & Program Management Branch
AIR-7C3 – Propulsion & Program Management Section AIR-760 – Central Certification Branch ACE-118W – Airframe & Services Branch AIR-7K3 – Airframe & Services Section AIR-760 – Central Certification Branch ACE-119A – Systems & Equipment Branch AIR-7A3 – Systems & Equipment Section AIR-750 – East Certification Branch
ACE-119W – Electrical Systems & Avionics Branch AIR-7K4 – Electrical Systems & Avionics Section AIR-760 – Central Certification Branch ACE-120A – Certificate Management & Safety Oversight Branch
AIR-7A4– Certificate Management & Safety Oversight Section
AIR-750 – East Certification Branch
ACE-180 – Manufacturing Inspection Office AIR-890 – Central MIO Branch AIR-860 – Central Certificate Management Branch
ACE-MIDO-42 – Atlanta MIDO AIR-892 – Atlanta MIDO Section AIR-853 – Atlanta Certificate Management Section
ACE-MIDO-43 – Wichita MIDO AIR-893 – Wichita MIDO Section AIR-865 – Wichita Certificate Management Section
ACE-MIDO-44 – Orlando MIDO AIR-894 – Orlando MIDO Section AIR-856 – Orlando Certificate Management Section
ACE-MIDO-46 – Minneapolis MIDO AIR-891 – Minneapolis / Chicago MIDO Section AIR-864 – Minneapolis Certificate Management Section
ACE-MIDO-47 – Cleveland MIDO AIR-895 – Vandalia / Cleveland / Detroit MIDO Section AIR-866 – Vandalia Certificate Management Section
ACE-MIDO48 – Vandalia MIDO AIR-895 – Vandalia / Cleveland / Detroit MIDO Section AIR-866 – Vandalia Certificate Management Section
ACE-MISO-53 – Detroit MISO AIR-895 – Vandalia / Cleveland / Detroit MIDO Section AIR-866 – Vandalia Certificate Management Section
ACE-MISO-54 – Chicago MISO AIR-891 – Minneapolis / Chicago MIDO Section AIR-864 – Minneapolis Certificate Management Section
AIR-110 – Certification Procedures Branch AIR-6C0 – Certification Procedures Branch AIR-630 – Organization & System Policy Branch
AIR-111 – Design Certification Section AIR-6C1 – Design Certification Section AIR-631 – Design & Maintenance Systems Section
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) AIR-112 – Production Certification Section AIR-6C2 – Production Certification Section AIR-632 – Production & Airworthiness Section
AIR-113 – Airworthiness Certification Section AIR-6C3 – Airworthiness Certification Section AIR-632 – Production & Airworthiness Section
AIR-120 – Technical & Administrative Support Branch AIR-9A0 – Headquarters Technical & Administrative Support Branch
AIR-640 – Integration & Performance Branch
AIR-130 – Systems & Equipment Standards Branch AIR-6B0 – Systems & Equipment Standards Branch AIR-620 – Technical Policy Branch
AIR-131 – Navigation & Flight Deck Technologies Section
AIR-6B1 – Navigation & Flight Deck Technologies Section
AIR-626B – Avionics Navigation & Flight Deck Unit
AIR-132 – Communications & Surveillance Technologies Section
AIR-6B2 – Communication & Surveillance Technologies Section
AIR-626C – Avionics Communication & Surveillance Unit AIR-133 – Electrical & Mechanical Equipment Section AIR-6B3 – Electrical & Mechanical Equipment Section AIR-620 – Technical Policy Branch
AIR-134 – System Integration Section AIR-6B4 – System Integration Section AIR-620 – Technical Policy Branch
AIR-140 – Operational Oversight Policy Branch AIR-6D0 – Operational Oversight Policy Branch AIR-630 – Organization & System Policy Branch
AIR-141 – Continued Operational Safety Policy Section AIR-6D1 – Continued Operational Safety Policy Section AIR-633 – Continued Operational Safety Systems Section
AIR-143 – Surveillance & Oversight Policy Section AIR-6D2 – Surveillance & Oversight Policy Section AIR-634 – System Oversight & Delegation Section
AIR-150 – Systems Performance & Development Branch AIR-6E0 – Systems Performance & Development Branch AIR-640 – Integration & Performance Branch
AIR-160 – Delegation & Organizational Procedures Branch
AIR-6F0 – Delegation & Organizational Procedures Branch
AIR-634 – System Oversight & Delegation Section and AVS-60 – ODA Office N/A AIR-20 – Alternative Fuels Program Staff AIR-650 – General Aviation Alternative Fuels Office
N/A AIR-300 –Organizational Performance Division AIR-300 – Safety & Performance Integration Division
N/A AIR-310 – Strategic Planning Branch AIR-320 – Program Integration Branch
N/A AIR-320 – Change Management Branch AIR-320 – Program Integration Branch
N/A AIR-330 – Standardization and Evaluation Branch AIR-360 – Safety Programs Branch
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) N/A AIR-340 - System Analysis Branch AIR-340 – Safety & Performance Data Branch
N/A AIR-350 - Executive Operations Branch AIR-320 – Program Integration Branch
N/A AIR-360 - Safety Program Management Branch AIR-360 – Safety Programs Branch
AIR-400 International Division AIR-400 International Division AIR-40 – International Office
AIR-410 International Policy Branch AIR-410 International Policy Branch AIR-41 – Integration & Performance Branch
AIR-420 International Affairs Branch AIR-420 International Affairs Branch AIR-42 – International Engagement Branch
AIR-510 – Administrative Services Branch AIR-9C0 – Administrative Services Branch AIR-910 – Operations Support Branch
AIR-520 – Training Branch AIR-9D0 – Training Branch AIR-940 – Workforce Development Branch
AIR-530 – Planning & Financial Management Branch
AIR-9E0 – Planning & Financial Management Branch AIR-920 – Financial & Contracts Services Branch
ANE-103 – Technical & Administrative Support Staff
AIR-9B0 – New England Technical & Administrative Support Branch
AIR-910 – Operations Support Branch
ANE-110 – Engine & Propeller Standards Staff AIR-6A0 – Engine & Propeller Standards Branch AIR-620 – Technical Policy Branch
ANE-111 – Rulemaking & Policy Branch AIR-6A1 – Rulemaking & Policy Section Project officers: AIR-610 – Certification Engagement Branch, Technical Policy: AIR-620 – Technical Policy Branch Technical Writers: AIR-646 Technical Writing Section ANE-112 – COS & Standardization Branch AIR-6A2 – COS & Standardization Section AIR-633 – Continued Operational Safety Systems Section
ANE-140 – Engine Certification Office AIR-7E0 – ECO Branch AIR-500 – Integrated Certificate Management Division
ANE-141 – Engine Certification Branch 141 AIR-7E1 – Engine Certification Section A AIR-500 – Integrated Certificate Management Division ANE-142 – Engine Certification Branch 142 AIR-7E2 – Engine Certification Section B AIR-500 – Integrated Certificate Management Division ANE-150 – Boston Aircraft Certification Office AIR-7B0 – Boston ACO Branch AIR-750 – East Certification Branch
ANE-151 – Aviation Safety Branch AIR-7B1 – Aviation Safety Section AIR-750 – East Certification Branch
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANE-170 – New York Aircraft Certification Office AIR-7H0 – New York ACO Branch AIR-750 – East Certification Branch
ANE-171 – Airframe & Mechanical Systems Branch AIR-7H1 – Airframe & Mechanical Systems Section AIR-750 – East Certification Branch ANE-172 – Avionics & Administrative Services Branch
AIR-7H2 – Avionics & Administrative Services Section AIR-750 – East Certification Branch ANE-173 – Propulsion & Flight Test Branch (Propulsion Personnel)
AIR-7H3 – Propulsion Section AIR-750 – East Certification Branch ANE-173 – Propulsion & Flight Test Branch (Flight Test Personnel)
AIR-711 – Northeast Section AIR-711 – East Section
ANE-180 – Manufacturing Inspection Office AIR-8A0 – New England MIO Branch AIR-850 – East Certificate Management Branch
ANE-MIDO-41 – Bradley MIDO AIR-8A1 – Bradley MIDO Section (Enfield, CT) AIR-851 – Bradley Certificate Management Section
ANE-MIDO-42 – Burlington MIDO AIR-8A2 – Burlington MIDO Section AIR-852 – Boston Certificate Management Section
ANE-MIDO-44 – New Cumberland MIDO AIR-8A4 – New Cumberland MIDO Section AIR-854 – New Cumberland Certificate Management Section ANE-MIDO-46 – Farmingdale MIDO AIR-8A5 – Farmingdale / Saddle Brook MIDO Section AIR-855 – Farmingdale Certificate Management Section
ANE-MISO-45 – Saddle Brook MISO AIR-8A5 – Farmingdale / Saddle Brook MIDO Section AIR-855 – Farmingdale Certificate Management Section
ANM-100B – Boeing Aviation Safety Oversight Office
AIR-860 – BASOO Branch AIR-500 – Integrated Certificate Management Division
ANM-100D – Denver Aircraft Certification Office AIR-7D0 – Denver ACO Branch AIR-770 – West Certification Branch
ANM-100L – Los Angeles Aircraft Certification Office
AIR-790 – Los Angeles ACO Branch AIR-770 – West Certification Branch
ANM-100S – Seattle Aircraft Certification Office AIR-780 – Seattle ACO Branch AIR-770 – West Certification Branch
ANM-102B – Certification Program Management Branch
AIR-861 – Certification Program Management Section AIR-510 – Certification Program Management Branch
ANM-102S – Program Management Branch AIR-781 – Program Management Section AIR-770 – West Certification Branch
ANM-103 – Technical & Administrative Support Staff
AIR-970 – Northwest Technical & Administrative Support Branch
AIR-910 – Operations Support Branch
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANM-103L – Technical & Administrative Support Staff
AIR-791 – Technical & Administrative Support Section AIR-770 – West Certification Branch ANM-104B – Delegation Oversight Branch AIR-862 – Delegation Oversight Section AIR-500 – Integrated Certificate Management
ANM-106B – Technical Support Services Branch AIR-863 – Technical Support Services Section AIR-570 – Certification Branch
ANM-108 – Manufacturing Inspection Office AIR-870 – Northwest MIO Branch AIR-870 –West Certification Management Branch
ANM-108B – Boeing Certificate Management Office
AIR-871 – Boeing CMO Section AIR-580 – System Operation & Oversight Branch
ANM-108B – Charleston CMU-47 AIR-871 – Boeing CMO Section AIR-580 – System Operation & Oversight Branch ANM-108B – Everett CMU-41 AIR-871 – Boeing CMO Section AIR-580 – System Operation & Oversight Branch ANM-108B – Renton CMU-42 AIR-871 – Boeing CMO Section AIR-580 – System Operation & Oversight Branch ANM-108L – Los Angeles MIDO AIR-873 – Los Angeles / Van Nuys MIDO Section AIR-873 – Los Angeles Certificate Management Section
ANM-108P – Phoenix MIDO AIR-874 – Phoenix MIDO Section AIR-871 – Scottsdale Certificate Management Section
ANM-108S –Seattle MIDO AIR-872 – Seattle MIDO Section AIR-872 – Seattle Certificate Management Section
ANM-108V –Van Nuys MIDO AIR-873 – Los Angeles / Van Nuys MIDO Section AIR-873 – Los Angeles Certificate Management Section
ANM-110 – Transport Standards Staff AIR-670 – Transport Standards Branch AIR-620 – Technical Policy Branch
ANM-111 – Airplane & Flight Crew Interface AIR-671 – Airplane & Flight Crew Interface Section AIR-620 – Technical Policy Branch
ANM-112 – Propulsion & Mechanical Systems AIR-672 – Propulsion & Mechanical Systems Section AIR-625 – Engine & Propulsion Section and AIR-623 – Mechanical Systems Section ANM-113 – Standardization AIR-673 – Standardization Section Project officers: AIR-610 – Certification Engagement Branch, Technical Policy: AIR-620 – Technical Policy Branch Technical Writers: AIR-646 Technical Writing Section ANM-114 – Airworthiness & Technical Communication
AIR-674 – Airworthiness & Technical Communications Section
AIR-720 – Operational Safety Branch
ANM-115 – Airframe & Cabin Safety Branch AIR-675 – Airframe & Cabin Safety Section AIR-622 – Airframe Section and AIR-624 – Cabin Safety Section ANM-116 – International Branch AIR-676 – International Section AIR-730 – International Validation Branch
09/29/2023
8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ANM-117 – Safety Management Branch AIR-677 – Safety Management Section AIR-627 – System Safety Assessment Section and AIR- 633 – Continued Operational Safety Systems Section ANM-120L – Airframe Branch AIR-792 – Airframe Section AIR-770 – West Certification Branch ANM-120S – Airframe Branch AIR-782 – Airframe Section AIR-770 – West Certification Branch ANM-130L – Systems & Equipment Branch AIR-793 – Systems & Equipment Section AIR-770 – West Certification Branch ANM-130S – Systems & Equipment Branch AIR-783 – Systems & Equipment Section AIR-770 – West Certification Branch ANM-140L – Propulsion Branch AIR-794 – Propulsion Section AIR-770 – West Certification Branch ANM-140S – Propulsion Branch AIR-784 – Propulsion Section AIR-770 – West Certification Branch ANM-150L – Cabin Safety, Mechanical & Environmental Systems
AIR-795 – Cabin Safety & Environmental Systems Section
AIR-770 – West Certification Branch
ANM-150S – Cabin Safety & Environmental Systems Branch
AIR-785 – Cabin Safety & Environmental Systems Section
AIR-770 – West Certification Branch ANM-160L – Flight Test Branch AIR-716 – West Section AIR-713 – West Section
ANM-160S – Flight Test Branch AIR-715 – Northwest Section AIR-713 – West Section
ASW-103 – Technical & Administrative Support Staff
AIR-980 – Southwest Technical & Administrative Support Branch
AIR-910 – Operations Support Branch
ASW-110 – Rotorcraft Standards Staff AIR-680 – Rotorcraft Standards Branch AIR-620 – Technical Policy Branch
ASW-111 – Regulations & Guidance Group AIR-681 – Regulations & Policy Section Project officers: AIR-610 – Certification Engagement Branch, Technical Policy: AIR-620 – Technical Policy Branch Technical Writers: AIR-646 Technical Writing Section ASW-112 – Safety Management Group AIR-682 – Safety Management Section AIR-627 – System Safety Assessment Section and AIR- 633 – Continued Operational Safety Systems Section ASW-130 – Delegation Systems Certification Office AIR-7J0 – DSCO Branch AIR-760 – Central Certification Branch
ASW-140 – Fort Worth Aircraft Certification Office AIR-7F0 – Fort Worth ACO Branch AIR-760 – Central Certification Branch
ASW-141 – Shared Services Branch AIR-713 – Southwest Section AIR-712 – Central Section
ASW-142 – Certification Branch AIR-7F1 – Certification Section AIR-760 – Central Certification Branch
09/29/2023 8100.18A Appendix B
2017 Pre-Realigned Routing Symbol Realigned Organization Routing Symbol 2023 Refined Organization Routing Rules (Process functions coordinate primarily with:) ASW-143 – Program Management Branch AIR-7F2 – Program Management / COS Section AIR-760 – Central Certification Branch ASW-180 – Manufacturing Inspection Office AIR-880 – Southwest MIO Branch AIR-860 – Central Certificate Management Branch
ASW-MIDO-41 – Bethany MIDO AIR-881 – Bethany MIDO Section AIR-861 – Oklahoma City Certificate Management Section ASW-MIDO-42 – Fort Worth MIDO AIR-882 – Fort Worth MIDO Section AIR-862 – Ft. Worth Certificate Management Section
ASW-MIDO-43 – San Antonio MIDO AIR-883 – San Antonio MIDO Section AIR-863 – San Antonio Certificate Management Section
N/A AIR-710 – Flight Test Branch AIR-710 – Flight Test & Human Factors Branch
AD/SAIB coordination with ANM-114, ANE-110, ACE-110, and ASW-110
AIR-720 – Operational Safety Branch AIR-720 – Operational Safety Branch
N/A AIR-721 – Airworthiness Products Section AIR-721 – Airworthiness Products Section
N/A AIR-721A – Transport Unit AIR-721A – Publications Unit
N/A AIR-721B – General Aviation & Rotorcraft Unit AIR-721A – Publications Unit N/A AIR-722 – COS Program Management Section AIR-722 – COS Program Management Section
N/A AIR-723 – Fleet Safety Section AIR-723 – Fleet Safety Section
N/A AIR-730 – International Validation Branch AIR-730 – International Validation Branch
N/A AIR-731 – Large Aircraft Section AIR-730 – International Validation Branch N/A AIR-732 – General Aviation Rotorcraft Section AIR-730 – International Validation Branch N/A AIR-733 – Propulsion TSO Section AIR-730 – International Validation Branch N/A AIR-734 – Technical Support Section AIR-730 – International Validation Branch N/A AIR-760 – Standardization and Support Branch AIR-740 – Integration & Performance Branch
N/A AIR-840 – Strategic Development & Operations Branch AIR-840 – Integration & Performance Branch
N/A AIR-960 – Business Services Branch AIR-910 – Operations Support Branch
Appendix C. Documents Reviewed
Order Number Change Title VS 1100.2B Managing AVS Delegation Programs
4040.26C Aircraft Certification Service Flight Test Risk Management Program
8000.51C Aircraft Certification Directorates' Delegation of Authority
8000.79 Use of Electronic Technology and Storage of Data
8000.95B Designee Management Policy
8040.1C Airworthiness Directives
IR-M 8040.1C Airworthiness Directives Manual
8040.5 Airworthiness Directive Process for Mandatory Continuing Airworthiness Information
8100.8D Designee Management Handbook
8100.11D Requirements for Finding Undue Burden and No Undue Burden Under 14 CFR Part 21
8100.15B 3 Organization Designation Authorization Procedures
IR 8100.16 Aircraft Certification Service Policy Statement, Policy Memorandum, and Deviation Memorandum Systems 8110.4C 6 Type Certification
8110.9 Handbook on Vibration Substantiation and Fatigue Evaluation of Helicopter and Other Power Transmissions Systems 8110.37F Designated Engineering Representative (DER) Handbook
8110.42D Parts Manufacturer Approval Procedures
8110.48A How to Establish the Certification Basis for Changed Aeronautical Products
8110.49A Software Approval Guidelines
8110.51 Acceptability of Previously Approved Certification Compliance Data from Foreign Sources
8110.52B Type Validation and Post-Type Validation Procedures
8110.53 Reciprocal Acceptance of Repair Design Data Approvals Between FAA and TCCA
8110.54A Instructions for Continued Airworthiness Responsibilities, Requirements, and Contents
8110.55B How to Evaluate and Accept Processes for Aeronautical Database Suppliers
8110.56B Restricted Category Type Certification
Order Number Change Title
8110.100B Special Airworthiness Information Bulletin
8110.101A Type Certification Procedures for Military Commercial Derivative Aircraft
IR 8110.102 Implementing Risk Based Resource Targeting (RBRT)
8110.103B Alternative Methods of Compliance (AMOC)
8110.105A Simple and Complex Electronic Hardware Approval Guidance
8110.106 Assessing the Relative Risk of Title 14 CFR Parts
8110.107A Monitor Safety/Analyze Data
8110.112A Standardized Procedures for Usage of Issue Papers and Development of Equivalent Levels of Safety Memorandums 8110.113 Approval of Flammability Test Data in Support of Major Repairs or Major Alterations
8110.115 1 Certification Project Initiation and Certification Project Notification
8110.116 Procedures for Requesting Development of SAE Standards
8110.117A Service Bulletins Related to Airworthiness Directives
8110.118 Commercial Parts
8110.119 Streamlined Process for Parts Manufacturer Approval (PMA)
8110.120 Processing Surrendered, Abandoned, and Historical Aircraft Type Certificates
8110.121 Type Certificate Data Sheet (TCDS) Notes
8120.12A 1 Production Approval Holder Use of Other Parties to Supplement Their Supplier Control Program
8120.13A International Corporation Supplier Surveillance Program Procedures
8120.16A Suspected Unapproved Parts Program
8120.18 PAHs Who Rebuild or Alter Their Own Products Under 14 (CFR 43.3(j))
8120.22A Production Approval Procedures
8120.23A Certificate Management of Production Approval Holders
8130.2J Airworthiness Certification of Aircraft and Related Products
8130.21H 1 Procedures for Completion and Use of the Authorized Release Certificate, FAA Form 8130-3, Airworthiness Approval 8130.34D Airworthiness Certification of Unmanned Aircraft Systems and Optionally Piloted Aircraft
8130.35C Amateur-Built Aircraft National Kit Evaluation Team
8130.36 Special Light-Sport Aircraft Audit Program
8150.1D Technical Standard Order Program
8150.4 Certification of Cargo Containers with Self-Contained Temperature Control Systems (Active ULDs)
AC Number Change Number
Title
00-56B Voluntary Industry Distributor Accreditation Program
00-58B Voluntary Disclosure Reporting Program
00-66 Selection of Cyclic Redundancy Code and Checksum Algorithms to Ensure Critical Data Integrity
00-68 Aircraft Certification Service Voluntary Disclosure Reporting Program
20-18B Qualification Testing of Turbojet and Turbofan Engine Thrust Reversers
20-24D Approval of Propulsion Fuels, Additives, and Lubricating Oils
20-27G Certification and Operation of Amateur-Built Aircraft
20-29B Use of Aircraft Fuel Anti-Icing Additives
20-30B Aircraft Position Light and Anticollision Light Installations
20-37E Aircraft Propeller Maintenance
20-40 Placards for Battery-Excited Alternators Installed in Light Aircraft
20-41A Substitute Technical Standard Order (TSO) Aircraft Equipment
20-42D Hand Fire Extinguishers for use in Aircraft
20-44 Glass Fiber Fabric for Aircraft Covering
20-45 Safe tying of Turnbuckles on Civil Aircraft
20-47 Exterior Colored Band around Exits on Transport Airplanes
20-53B Protection of Aircraft Fuel Systems Against Fuel Vapor Ignition Caused by Lightning
20-56A Marking of TSO-C72b Individual Flotation Devices
20-65A U.S. Airworthiness Certificates and Authorizations for Operation of Domestic and Foreign Aircraft
20-66B Propeller Vibration and Fatigue
20-67B Airborne VHF Communication Equipment Installations
20-68B Recommended Radiation Safety Precautions for Ground Operation of Airborne Weather Radar
20-69 Conspicuity of Aircraft Instrument Malfunction Indicators
20-71 Dual Locking Devices on Fasteners
20-73A Aircraft Ice Protection
20-74 Aircraft Position and Anticollision Light Measurements
20-88A Guidelines on the Marking of Aircraft Powerplant Instruments (Displays)
20-100 General Guidelines for Measuring Fire-Extinguishing Agent Concentrations in Powerplant Compartments
AC Number Change Number
Title
20-104 Revised Powerplant Engineering Report No. 3A Standard Fire Test Apparatus and Procedure (for Flexible Hose Assemblies) 20-106 Aircraft Inspection for the General Aviation Aircraft Owner
20-107B 1 Composite Aircraft Structure
20-113 Pilot Precautions and Procedures to be taken in Preventing Aircraft Reciprocating Engine Induction System and Fuel System Icing Problems 20-115C Airborne Software Assurance
20-116 Marking Aircraft Fuel Filler Openings with Color Coded Decals
20-118A Emergency Evacuation Demonstration
20-119 Fuel Drain Valves
20-120 Nondirectional Beacon Frequency Congestion
20-124 Water Ingestion Testing for Turbine Powered Airplanes
20-127 Use of Society of Automotive Engineers (SAE) Class H11 Bolts
20-128A Design Considerations for Minimizing Hazards caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure 20-131A Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II) and Mode S Transponders 20-133 Cockpit Noise and Speech Interference Between Crewmember
20-134 Test Procedures for Maximum Allowable Airspeed Indicators
20-135 Powerplant Installation and Propulsion System Component Fire Protection Test Methods, Standards and Criteria 20-136B Aircraft Electrical and Electronic System Lightning Protection
20-138D 2 Airworthiness Approval of Positioning and Navigation Systems
20-140C Guidelines for Design Approval of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS) 20-141B Airworthiness and Operational Approval of Digital Flight Data Recorder Systems
20-144 Recommended Method for FAA approval of Aircraft Fire Extinguishing System Components
20-146 Methodology for Dynamic Seat Certification by Analysis for Use in Part 23, 25, 27, and 29 Airplanes and Rotorcraft 20-147A Turbojet, Turboprop, Turboshaft, and Turbofan Engine Induction System Icing and Ice Ingestion
20-148 Reusable Software Components
20-149B Installation Guidance for Domestic Flight Information Services - Broadcast
20-150B Airworthiness Approval of Satellite Voice (SATVOICE) Equipment Supporting Air Traffic Service (ATS) Communication 20-151B Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), Versions 7.0 & 7.1 and Associated Mode S Transponders
AC Number Change Number
Title
20-152 RTCA, Inc., Document RTCA/DO-254, Design Assurance Guidance for Airborne Electronic Hardware
20-153B Acceptance of Aeronautical Data Processes and Associated Databases
20-155A Industry Documents to Support Aircraft Lightning Protection Certification
20-156 Aviation Databus Assurance
20-157 How to Prepare Reliability Assessment Plans for Aircraft Systems and Equipment
20-158A The Certification of Aircraft Electrical and Electronic Systems for Operation in the High- Intensity Radiated Fields (HIRF) Environment 20-160A Onboard Recording of Controller Pilot Data Link Communication (CPDLC) In Crash Survivable Memory 20-161 Aircraft Onboard Weight and Balance Systems
20-158A The Certification of Aircraft Electrical and Electronic Systems for Operation in the High- Intensity Radiated Fields (HIRF) Environment 20-160A Onboard Recording of Controller Pilot Data Link Communication (CPDLC) In Crash Survivable Memory 20-161 Aircraft Onboard Weight and Balance Systems
20-162A Airworthiness Approval of Installed Passive Ultra High Frequency (UHF) Radio Frequency Identification (RFID) Tags 20-163 Displaying Geometric Altitude Relative to Mean Sea Level
20-164 Designing and Demonstrating Aircraft Tolerance to Portable Electronic Devices
20-165B Airworthiness Approval of Automatic Dependent Surveillance - Broadcast (ADS-B) Out Systems
20-166A Issue Paper Process
20-167A Airworthiness Approval of Enhanced Vision System, Synthetic Vision System, Combined Vision System, and Enhanced Flight Vision System Equipment 20-168 Certification Guidance for Installation of Non-Essential, Non-Required Aircraft Cabin Systems & Equipment (CS&E) 20-169 Guidance for Certification of Military and Special Mission Modifications and Equipment for Commercial Derivative Aircraft (CDA) 20-170 1 Integrated Modular Avionics Development, Verification, Integration, and Approval Using RTCA/DO-297 and Technical Standard Order C153 20-171 Alternatives to RTCA/DO-178B for Software in Airborne Systems and Equipment
20-172B Airworthiness Approval for ADS-B in Systems and Applications
20-173 Installation of Electronic Flight Bag Components
20-174 Development of Civil Aircraft and Systems
20-175 Controls for Flight Deck Systems
20-176A Service Bulletins Related to Airworthiness Directives and Indicating FAA Approval on Service Documents 20-177 Design and Installation Guidance for an Airborne System for Non-Required Telecommunication Service in Non-Aeronautical Frequency Bands 20-178 Flammability Testing of Aircraft Cabin Interior Panels After Alterations
AC Number Change Number
Title
20-179 Certification Data Retention Agreements and Government Records
20-181 Airworthiness Approval of Attitude Heading Reference System (AHRS) Equipment
20-182A Airworthiness Approval for Aircraft Weather Radar Systems
20-183 Laser Airworthiness Installation Guidance
20-184 Guidance on Testing and Installation of Rechargeable Lithium Battery and Battery Systems on Aircraft
20-185 Airworthiness Approval of Synthetic Vision Guidance System
21.17-1A 1 Type Certification-Airships
21.17-2A Type Certification-Fixed Wing Gliders (Sailplanes), Including Powered Gliders
21.17-3 Type Certification of Very Light Airplanes Under FAR 21.17(b)
21.101-1B Establishing the Certification Basis of Changed Aeronautical Products
21.303-4 Application for Parts Manufacturer Approval Via Tests and Computations or Identicality
21-2L Complying with the Requirements of Importing Countries or Jurisdictions When Exporting U.S. Products, Articles, or Parts 21-4B Special Flight Permits for Operation of Overweight Aircraft
21-9B Manufacturers Reporting Failures, Malfunctions, or Defects
21-12C Application for U.S. Airworthiness Certificate, FAA Form 8130-6
21-13 Standard Airworthiness Certification of Surplus Military Aircraft and Aircraft Built from Spare and Surplus Parts 21-16G RTCA Document DO-160 versions D, E, F, and G, “Environmental Conditions and Test Procedures for Airborne Equipment 21-19B Installation of Used Aircraft Engines in New Production Aircraft
21-21 Use of Automobile Gasoline in Agricultural Aircraft
21-22 Injury Criteria for Human Exposure to Impact
21-23B Airworthiness Certification of Civil Aircraft, Engine, Propellers, and Related Products Imported to the United States 21-24A Extending a Production Certificate to a Facility Located in a Bilateral Airworthiness Agreement Country 21-25B Approval of Modified Seating System Initially Approved Under a Technical Standard Order
21-26A Quality Control for the Manufacture of Composite Structures
21-28 Airworthiness Certification of U.S.-Produced Aircraft and Engine Kits Assembled Outside the United States 21-29D Detecting and Reporting Suspected Unapproved Parts
21-31A Quality Control for the Manufacture of Non-Metallic Compartment Interior Components
21-32B Control of Products and Parts Shipped Prior to Type Certificate Issuance
AC Number Change Number
Title
21-34 Shoulder Harness-Safety Belt Installations
21-37 Primary Category Aircraft
21-41A Replacing MIL-S-8879C With SAE AS8879
21-43A Production Approvals Under Subparts G, K, & O
21-44A Issuance of Export Airworthiness Approvals Under 14 CFR Part 21 Subpart L
21-45 Commercial Parts
21-46A Technical Standard Order Program
21-47 Submittal of Data to an ACO, a DER or an ODA for a Major Repair or a Major Alteration
21-48 Using Electronic Modeling Systems as Primary Type Design Data
21-49 Gaining Approval of Seats with Integrated Electronic Components
21-50 Installation of TSOA Articles and LODA Appliances
21-51 Applicant’s Showing of Compliance and Certifying Statement of Compliance
21-52 Obtaining Foreign Design Approval / Acceptance of U.S. Products and Articles
21-54 Experimental Airworthiness Certification of Certain Former Military Aircraft
21-55 Process to Support FAA Findings of Undue Burden or No Undue Burden for PAHs Requesting to Use a Manufacturing Facility Located Outside of the United States 23.562-1 Dynamic Testing of Part 23 Airplane Seat/Restraint Systems and Occupant Protection
23.607-1 Self-Locking Nuts on Bolts Subject to Rotation
23.629-1B Means of Compliance with Title 14 CFR, Part 23, § 23.629, Flutter
23.1309-1E System Safety Analysis and Assessment for Part 23 Airplanes
23.1311-1C Installation of Electronic Display in Part 23 Airplanes
23.1521-1B Type Certification of Automobile Gasoline in Part 23 Airplanes with Reciprocating Engines
23.1521-2 1 Type Certification of Oxygenates and Oxygenated Gasoline Fuels in Part 23 Airplanes with Reciprocating Engines 23-2A 1 Flammability Tests
23-8C Flight Test Guide for Certification of Part 23 Airplanes
23-9 Evaluation of Flight Loads on Small Airplanes with T, V, +, or Y Empennage Configurations
23-10 Auxiliary Fuel Systems for Reciprocating and Turbine Powered Part 23 Airplanes
23-13A Fatigue, Fail-Safe, and Damage Tolerance Evaluation of Metallic Structure for Normal, Utility, Acrobatic, and Commuter Category Airplanes 23-14 Type Certification Basis for Conversion from Reciprocating Engine to Turbine-Powered Part 23 Airplanes
AC Number Change Number
Title
23-15A 1 Small Airplane Certification Compliance Program
23-16A Powerplant Guide for Certification of Part 23 Airplanes and Airships
23-17C Systems and Equipment Guide for Certification of Part 23 Airplanes and Airships
23-18 Installation of Terrain Awareness and Warning System (TAWS) Approved for Part 23 Airplanes
23-19A Airframe Guide for Certification of Part 23 Airplanes
23-20 Acceptance Guidance on Material Procurement and Process Specifications for Polymer Matrix Composite Systems 23-21 1 Airworthiness Compliance Checklists Used to Substantiate Major Alterations for Small Airplanes
23-22 Guidance for Approved Model List (AML) Supplemental Type Certificated (STC) Approval of Part 23 Airplane Avionics Installations 23-23 Standardization Guide for Integrated Cockpits in Part 23 Airplanes
23-24 Airworthiness Compliance Checklists for Common Part 23 Supplemental Type Certificate (STC) Projects 23-27 Parts and Materials Substitution for Vintage Aircraft
23-1523 Minimum Flight Crew
25.307-1 Proof of Structure
25.335-1A Design Dive Speed
25.341-1 Dynamic Gust Loads
25.362-1 Engine Failure Loads
25.415-1 Ground Gust Conditions
25.491-1 Taxi, Takeoff and Landing Roll Design Loads
25.562-1B 1 Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes
25.571-1D Damage Tolerance and Fatigue Evaluation of Structure
25.613-1 Material Strength Properties and Material Design Values
25.621-1 Casting Factors
25.629-1B Aeroelastic Stability Substantiation of Transport Category Airplanes
25.703-1 Takeoff Configuration Warning Systems
25.723-1 Shock Absorption Tests
25.729-1 Transport Airplane Landing Gear Retracting Mechanism
25.735-1 Brakes and Braking Systems Certification Tests and Analysis
25.773-1 Pilot Compartment View Design Considerations
AC Number Change Number
Title
25.775-1 Windows and Windshields
25.783-1A Fuselage Doors and Hatches
25.785-1B Flight Attendant Seat and Torso Restraint System Installations
25.795-1A Flightdeck Intrusion Resistance
25.795-2A Flight Deck Penetration Resistance
25.795-3 Flightdeck Protection (Smoke and Fumes)
25.795-4 Passenger Cabin Smoke Protection
25.795-5 Cargo Compartment Fire Suppression
25.795-6 Least Risk Bomb Location
25.795-7 Survivability of Systems
25.795-8 Interior Design to Facilitate Searches
25.795-9 Chemical Oxygen Generator Security Standards
25.803-1A Emergency Evacuation Demonstrations
25.807-1 Uniform Distribution of Exits
25.812-1A Floor Proximity Emergency Escape Path Marking
25.812-2 Floor Proximity Emergency Escape Path Marking Systems Incorporating Photoluminescent Elements
25.851-1 Built-in Fire Extinguishing/Suppression Systems in Class C and Class F Cargo Compartments
25.853-1 Flammability Requirements for Aircraft Seat Cushions
25.856-1 Thermal/Acoustic Insulation Flame Propagation Test Method Details
25.856-2A Installation of Thermal/Acoustic Insulation for Burnthrough Protection
25.857-1 Class B and F Cargo Compartments
25.869-1A Fire Protection Systems
25.899-1 Electrical bonding and protection against static electricity
25.905-1 Minimizing the Hazards from Propeller Blade and Hub Failures
25.939-1 Evaluating Turbine Engine Operating Characteristics
25.963-1 Fuel Tank Access Covers
25.975-1 Fuel Vent Fire Protection
25.981-1C Fuel Tank Ignition Source Prevention Guidelines
AC Number Change Number
Title
25.981-2A Fuel Tank Flammability Reduction Means
25.994-1 Design Considerations to Protect Fuel Systems during a Wheels-Up Landing
25.1302-1 Installed Systems and Equipment for Use by the Flightcrew
25.1309-1A System Design and Analysis
25.1322-1 Flightcrew Alerting
25.1329-1C 1 Approval of Flight Guidance Systems
25.1353-1A Electrical Equipment and Installations
25.1357-1A Circuit Protective Devices
25.1360-1 Protection Against Injury
25.1362-1 Electrical Supplies for Emergency Conditions
25.1365-1 Electrical Appliances, Motors, and Transformers
25.1435-1 Hydraulic System Certification Tests and Analysis
25.1455-1 Wastewater/Potable Water Drain System Certification Testing
25-1457-1A Cockpit Voice Recorder Installations
25-1523-1 Minimum Flightcrew
25.1529-1A Instructions for Continued Airworthiness of Structural Repairs on Transport Airplanes
25.1581-1 1 Airplane Flight Manual
25.1701-1 Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes
25-7D Flight Test Guide for Certification of Transport Category Airplanes
25-8 Auxiliary Fuel Systems Installations
25-9A Smoke Detection, Penetration, and Evacuation Tests and Related Flight Manual Emergency Procedures
25-11B Electronic Flight Displays
25-12 Airworthiness Criteria for the Approval of Airborne Windshear Warning Systems in Transport Category 25-13 Reduced and Derated Takeoff Thrust (Power) Procedures
25-15 Approval of Flight Management Systems in Transport Category Airplanes
25-16 Electrical Fault and Fire Prevention and Protection
25-17A Transport Airplane Cabin Interiors Crashworthiness Handbook
25-18 Transport Category Airplanes Modified for Cargo Service
AC Number Change Number
Title
25-19A Certification Maintenance Requirements
25-20 Pressurization, Ventilation and Oxygen Systems Assessment for Subsonic Flight including High Altitude Operation 25-22 Certification of Transport Airplane Mechanical Systems
25-23 Airworthiness Criteria for the Installation Approval of a Terrain Awareness and Warning System (TAWS) for Part 25 Airplanes 25-24 Sustained Engine Imbalance
25-25A Performance and Handling Characteristics in Icing Conditions
25-26 Development of Standard Wiring Practices Documentation
25-27A Development of Transport Category Airplane Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness Using and Enhanced Zonal Analysis Procedure 25-28 Compliance of Transport Category Airplanes with Certification Requirements for Flight in Icing Conditions 25-29 Development of a Nondestructive Inspection Program/Organization
25-30 Fuel Tank Strength in Emergency Landing Conditions
25-31 Takeoff Performance Data for Operations on Contaminated Runways
25-32 Landing Performance Data for Time-of-Arrival Landing Performance Assessments
26-1 Part 26, Continued Airworthiness and Safety Improvements
27-1B 7 Certification of Normal Category Rotorcraft
29-2C 7 Certification of Transport Category Rotorcraft
33.4-1 Instructions for Continued Airworthiness
33.4-2 Instructions for Continued Airworthiness: In-Service Inspection of Safety Critical Turbine Engine Parts at Piece-Part Opportunity 33.4-3 1 Instructions for Continued Airworthiness, Aircraft Engine High Intensity Radiated Fields (HIRF) and Lightning Protection Features 33.7-1 Ratings and Operating Limitations for Turbine Engines (Sections 33.7 and 33.8)
33.14-1 Damage Tolerance for High Energy Turbine Engine Rotors
33.15-1 Manufacturing Process of Premium Quality Titanium Alloy Rotating Engine Components
33.15-2 Manufacturing Processes for Premium Quality Nickel Alloy for Engine Rotating Parts
33.17-1A Engine Fire Protection
33.19-1 Guidance Material for 14 CFR §33.19, Durability, for Reciprocating Engine Redesigned Parts
33.27-1A Engine and Turbosupercharger Rotor Overspeed Requirements of 14 CFR § 33.27.
33.28-1 Compliance Criteria for 14 CFR § 33.28, Aircraft Engines, Electrical and Electronic Engine Control Systems 33.28-2 Guidance Material for 14 CFR 33.28, Reciprocating Engine, Electrical and Electronic Engine Control Systems
09/29/2023 8100.18A Appendix C
AC Number Change Number
Title
33.28-3 Guidance Material For 14 CFR § 33.28, Engine Control Systems
33.47-1 Detonation Testing in Reciprocating Aircraft Engines
33.63-1 Turbine Engine Vibration
33.64-1 Guidance for Pressurized Engine Static Parts
33.65-1 Surge and Stall Characteristics of Aircraft Turbine Engines
33.70-1 Guidance Material for Aircraft Engine Life-Limited Parts Requirements
33.70-2 Damage Tolerance of Hole Features in High-Energy Turbine
33.74/92-1B Turbine Engine Continued Rotation and Rotor Locking
33.75-1A 1 Guidance Material For 14 CFR 33.75, Safety Analysis
33.76-1A Bird Ingestion Certification Standards
33.78-1 Turbine Engine Power-Loss and Instability in Extreme Conditions of Rain and Hail
33.83-1 Comparative Method to Show Equivalent Vibratory Stresses and High Cycle Fatigue Capability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts 33.87-1A Engine Over torque Test, Calibration Test, Endurance Test, and Teardown Inspection for Turbine Engine Certification (§§ 33.84, 33.85, 33.87, 33.93) 33.87-2 Comparative Endurance Test Method to Show Durability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts 33.90-1A Initial Maintenance Inspection (IMI), 14 CFR 33.90, Test for Turbine Engines
33.91-1 Engine System and Component Tests
33.201-1 Extended Operations (ETOPS) Eligibility for Turbine Engines
33-2C General Type Certification Guidelines for Turbine Engines
33-5 Turbine Engine Rotor Blade Containment/Durability
33-6 1 Weld Repair of Aluminum Crankcases and Cylinders of Piston Engines
33-7A Guidance for 30-Second and 2-Minute One-Engine-Inoperative (OEI) Ratings for Rotorcraft Turbine Engines 33-8 Guidance for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts under Test and Computation 33-9 Developing Data for Major Repairs of Turbine Engine Parts
33-11 Oxidation, Hot Corrosion, Thermal Fatigue, and Erosion Characteristics Testing to Support 14 CFR, Part 33, § 33.15, Compliance for Turbine Engines 33-83A Turbine Engine Vibration Test
34-1B Fuel Venting and Exhaust Emission Requirements for Turbine Engine Powered Airplanes
35.4-1 Propeller Instructions for Continued Airworthiness
AC Number Change Number
Title
35.16-1 Propeller Critical Parts
35.23-1 Guidance Material for 14 CFR § 35.23, Propeller Control System
35.37-1B Propeller Fatigue Limits and Evaluation
35-1 Certification of Propellers
39-8 Continued Airworthiness Assessments of Powerplant and Auxiliary Power Unit Installations of Transport Category Airplanes 39-10 Alternative Methods of Compliance
45-2E Identification and Registration Marking
45-3A Installation, Removal or Change of Identification Data and Identification Plates on Aircraft Engines
45-4 Identification, marking, and placarding of aircraft issued special airworthiness certificates in the light-sport category (S-LSA) and aircraft issued experimental certificates for the purpose of operating light-sport aircraft (E-LSA) 91-33A Use of Alternate Grades of Aviation Gasoline for Grade 80/87, and Use of Automotive Gasoline
91-56B Continuing Structural Integrity Program for Airplanes
91-62A Use of Child Seats in Aircraft
91-82A 1 Fatigue Management Programs for In-Service Issues
121-6 Portable Battery-Powered Megaphones
120-73 Damage Tolerance Assessment of Repairs to Pressurized Fuselages
120-93 Damage Tolerance Inspections for Repairs and Alterations
120-94 Aircraft Electrical Wiring Interconnection Systems Training Program
120-97A 1 Incorporation of Fuel Tank System Instructions for Continued Airworthiness into Operator Maintenance or Inspection Programs 120-98A 1 Operator Information for Incorporating Fuel Tank Flammability Reduction Requirements into a Maintenance or Inspection Program 120-102A Incorporation of Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness into an Operator’s Maintenance Program 120-104 Establishing and Implementing Limit of Validity to Prevent Widespread Fatigue Damage
121.321-1 Compliance with Requirements of § 121.321, Operations in Icing
187-2 Aircraft Certification Service Fees for Providing Production Certification-Related Services Outside of the United States
Policy Number Title
01/115/36 Seat Technical Standard Order Authorization and Installation Assessment
97-111-34 Installation of In-Seat Power Supply Systems (ISPSS) for Portable Electronic Devices (PED)
97-113-143 Standards for Cargo or Baggage Compartments
98-112-24 Halon Concentration Levels
2001-02-05 Guidance on Adhesive Approval for use in CAR/FAR Type Certificated Wooden Airplanes
8100.8D_20120228 Deviation to FAA Order 8100.8D for use of FAA Form 8110-14, Statement of Qualifications
ACE-00-23.561-01 Issuance of Policy Statement, Methods of Approval of Retrofit Shoulder Harness Installations in Small Airplanes ACE-110_19971201 Certification of Small, Single-Engine Piston or Turbopropeller Airplanes Used for Special Purpose Agricultural Operations AIR-2_2013-06-27 Deviation to Federal Aviation Administration (FAA) Order 8120.23, Certificate Management of Production Approval Holders AIR-6B0-18-6B0-DM415 AC 20-165B General Memo
AIR-100-11-100-001 Training Requirements for Major Repairs and/or Major Alterations Approval Authority
AIR-100_12-09-25 Deviation Approval for Issuance of Appliance Airworthiness Directives (AD)
AIR-100_12-10-11 Conduct Certain Ground Tests without a Type Inspection Authorization (TIA)
AIR-100-12-110-002 Approval of Temperature Controlled Shipping Containers (Non-ULD), Revision 2.1
AIR100-13-110-800 Newly Revised FAA Forms 8110-9, Type Certificate, and 8110-2, Supplemental Type Certificate
AIR100-13-110-801 Guidance for Mandatory Continuing Airworthiness Information (MCAI) Worksheet
AIR-100-14-110-DM03 Deviation from Designated Engineer Representative (DER) Qualification Requirements in FAA Order 8100.8 for Former FAA Flight Test Pilots AIR100-14-110-DM07 Deviation to Federal Aviation Administration (FAA) Order 8130.34C Authorizing Certain Designated Airworthiness Representatives (DAR) to Issue Special Airworthiness Certificates in the Experimental Category at Unmanned Aircraft System (UAS) Test Ranges Established by Public Law 112-95 AIR100-14-110-DM11 Deviation for Prototype Users of Aviation Safety Knowledge Management Environment (ASKME) Engineering Design and Production Approvals (EDPA) Information Technology (IT) Tool AIR100-14-110-DM12 Deviations to Federal Aviation Administration (FAA) Order 8130.34C, Appendix A, Operating Limitations for Unmanned Aircraft Systems (UAS), and Aircraft Inspection Procedures AIR100-14-110-DM14 Approved Deviation to FAA Order 8110.4C paragraph 3-3.e.(20) and Order 8130.2G paragraph 306.f.(2). AIR100-14-110-DM22 Deviation to Federal Aviation Administration (FAA) Order 8130.34C regarding the Issuance of a Certificate of Waiver or Authorization (COA) for compliance with Title 14, Code of Federal Regulations (14 CFR) 91.113, Right-of-way rules: Except water operations AIR100-14-110-GM12 Clarification: FAA Order 8130.2G Change 1, Airworthiness Certification of Aircraft and Related Products, paragraph 4039 and 4082 AIR100-14-110-GM26 PMA combination of non-related previously approved articles or kits
AIR100-14-110-PM05 Revised Policy on Focal Point ACOs For Restricted Category/Military Surplus Aircraft
AIR100-14-110-PM06 Revised Policy to Order 8130.2G paragraph 4102 n (1) regarding Canadian Amateur-Built Aircraft
AIR100-14-140-DM06 Deviation to FAA Order 8100.8D, Designee Management Handbook, Chapter 8, for former designees.
Policy Number Title
AIR100-14-140-DM10 Deviation to FAA Order 8040.5, Removal of MCAI Metrics
AIR100-14-140-DM13 Deviation to Federal Aviation Administration (FAA) Order 8120.23, Certificate Management of Production Approval Holders, Appendix I, Preparation Instructions for FAA Form 8100-6, Noncompliance Record, and FAA Order 8120.22, Production Approval Procedures AIR100-16-110-DM04 Issuance of the Authorized Release Certificate, FAA Form 8130-3, Airworthiness Approval Tag and PAH Issuance of Authorized Release Documents for Export AIR100-16-130-GM18 Engineering Considerations for Powder Bed Fusion Additively Manufactured Parts
AIR100-2010-001 Authorization and Delegation of Functions Related to the Fuel Tank Flammability Reduction Rule
AIR100-2010-120-003 Acceptance of Composite Specification and Design Values Developed using the NCAMP Process
AIR-100-EWIS-4-6-10 Approval of Electrical Wiring Interconnection System
AIR600-19-600-DM01 Deviation to FAA Orders and Policy to Address Training, Oversight, and Renewal Requirement Due Dates for Certain Designees Impacted by the December 2018 Lapse in FAA Funding AIR600-19-DM125 Deviation to FAA Order 8130.2J to Allow for the Issuance of Transferable Special Flight Permits for Production Flight Testing to a Manufacturer of Light Sport Aircraft AIR600-20-6C0-DM134 Deviation from FAA Order 8130.2J for the issuance of Special Flight Permits (SFP)
AIR600-20-600-DM01 Deviation to FAA Order 8120.22A, Production Approval Procedures
AIR-600-20-600-PM04 Guidance on Congressional Mandate for Rotorcraft Crash Resistant Fuel Systems
AIR600-21-600-DM02 Deviation to Order 8110.118, Commercial Parts, to Facilitate Use of Commercial Parts for Low-Risk Unmanned Aircraft Systems AIR600-21-630-DM08 Deviation to FAA Order 8130.2J regarding FAA Form 8100-1, Special Flight Authorization (SFA) Application Numbering, and FAA Form 8130-4 AIR600-21-630-GM05 Clarification of Policies and Procedures Concerning Certain Statements of Conformity from Aircraft Manufacturers AIR600-21-630-GM07 Revision of Statements in "Import Requirements" Section of Type Certificate Data Sheets (TCDS)
AIR600-21-630-GM11 CLARIFICATION: Memo No. AIR600-21-630-DM13
AIR600-21-AIR-600-PM04- R1
Guidance on the Implementation of the Aircraft Certification, Safety, and Accountability Act, Section 116(b), Flight Crew Alerting AIR-600-22-600-GM02 Cancellation of Advisory Circular AC 33.65-1, Surge and Stall Characteristics of Aircraft Turbine Engines AIR-600-22-600-GM03 Cancellation of Policy Statement PS-ANE100-1999-00009, Methods of Compliance for Title 14 of the Code of Federal Regulations (14 CFR) Parts 33.51 Operation Test AIR600-22-600-PM03 Clarification on FAA Approval of Repair Specifications
AIR-600-22-630-GM01 Notice of Decommissioning of the Regulatory and Guidance Library (RGL) and Transition to the Dynamic Regulatory System (DRS)
AIR600-22-634-DM08 Deviation Extending Delegated Engineering Representatives (DER) Expiration Dates in the Designee Information Network (DIN) in Order to Facilitate the Transition to the Designee Management System (DMS) AIR600-22-634-PM03 Guidance for the Issuance of a Special Flight Authorization (SFA) for an Unmanned Aircraft System (UAS), Optionally Piloted Aircraft (OPA), or an OPA/UAS
AIR-600-22-DM13 Clarification to FAA Order 8000.95B, Designee Management Policy, Volume 8, DMIR and DAR-F Designee Policy, for production conformity
Policy Number Title
AIR-600-22-GM05 Authorization to Issue an Experimental Airworthiness Certificate Outside the United States
AIR-600-FY22-630-11 Deviation to FAA Order 8000.95, Designee Management Policy, Volume 8, DMIR and DAR-F Designee Policy, Chapter 4.
AIR600-FY22-630-DM02 Deviation from FAA Order 8110.37F, DER Handbook
AIR-600-FY22-630-DM05 Deviation to FAA Order 8120.23A to Extend FY22 End-of-Cycle Due Dates and Qualification Currencies for On-Site Quality System Audits Due to the Rise in COVID-19 Cases
AIR600-FY22-630-DM07 Deviations to FAA Order 8130.2J, Airworthiness Certification of Aircraft, Concerning Electronic ASKME Airworthiness Certification
AIR-600-FY22-630-DM09 Deviation to FAA Order 8130.34D, Airworthiness Certification of Unmanned Aircraft Systems and Optionally Piloted Aircraft, to Remove AUS-420 from the Airworthiness Certification Process
AIR-600-FY22-630-DM10 Deviation to FAA Order 8130.34D, Airworthiness Certification of Unmanned Aircraft Systems and Optionally Piloted Aircraft to Update Operating Limitation 26
AIR600-FY22-630-PM06 Correction of the term “natural person” in FAA Order 8130.2J, Airworthiness Certification of Aircraft, paragraph 15-2
AIR600-FY22-632-DM04 Deviation to FAA Order 8130.2J, Airworthiness Certification of Aircraft to allow the issuance of a single FAA Form 8130-7, Special Airworthiness Certificate for Pipistrel Sinus Flex, serial number 565 SFN 912 LSA AIR-630-22-DM15 Deviation to 8110.4C, Type Certification, relating to the retention of FAA files to aid the transfer of Type Certificates and Supplemental Type Certificates
AIR630_2020-12-21 Minor Revisions to Operating Limitations in FAA Order 8130.34
AIRl00-17-110-GM01 Cancellation of FAA Order 1110.133, Certification Process Study (CPS) Response Aviation Rulemaking Committee
ANM-01-04 System Wiring Policy for Certification of Part 25 Airplanes.
ANM-01-111-165 Policy Statement on Certification of Power Supply Systems for Portable Electronic Devices on Part 25 Airplanes
ANM-03-115-31 Conducting Component Level Tests to Demonstrate Compliance with 25.785(b) and (d)
ANM-08-113-001 Payload Capacity Definition in Design Approval Holder Rules
AVP-300-15 U.S. State Safety Program
U.S. State Safety Program
AVS-2021-PM02 FAA Assignment of Advisors for Organization Designation Authorization (ODA) Engineering and Flight Test Unit Members (UM) at Boeing, General Electric, and Pratt & Whitney
AVS-2022-01 Transfer of Authority to Manage AVS Delegation Policy in Orders VS 1100.2, 8000.95, 8100.8, and 8100.15 and Related IT Tools to AVS-60
PS-AIR-20-1902 Reducing Incorrect Connections of Electrical and Plumbing Components of Fire Detection, Suppression, and Extinguishing Systems
09/29/2023 8100.18A Appendix C
Policy Number Title
PS-AIR-25-33 Occupant Injury Considerations for Dual Pilot Head Up Display (HUD) Installations
PS-AIR-33.27-02 Turbine, Compressor, Fan, and Turbosupercharger Rotor Overspeed Engine Control Systems, 14 CFR § 33.27(c) & (e)
PS-AIR100-2006-MMPDS Metallic Materials Properties Development and Standardization (MMPDS) Handbook
PS-AIR-100-2007-12-27B Enhanced Airworthiness Program for Airplane Systems (EAPAS) Supplemental Type Certificate (STC) limitation
PS-AIR-100-2009-05-27 Adding Part 26 to Type Certificate Data Sheets and Supplemental Type Certificates
PS-AIR-100-May-4-2010 EAPAS FTS
Authorization and Delegation of Functions Related to the Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety Rule (EAPAS/FTS)
PS-ANE-2003-35-1-R0 Propeller Ice Protection Equipment
PS-ANM-01-02 Type Certification Assessment of Thrust Management Systems
PS-ANM-25.853-01-R2 Flammability Testing of Interior Materials
PS-ANM-25.981-02 Policy on Issuance of Special Conditions and Exemptions Related to Lightning Protection of Fuel Tank Structure and Systems
PS-ANM-25-08 Application of AC 20-170, Integrated Modular Avionics Development, Verification, Integration, and Approval Using RTCA/DO-297 and Technical Standard Order-C153.
PS-ANM-25-20 High-Energy Wide-Area Blunt Impact for Composite Structures
PS-ANM-25-32 Certification of Cargo Projects
PS-ANM100-01-03A Factors to Consider when Reviewing an Applicant's Proposed Human Factors Methods of Compliance for Flight Deck Certification
PS-ANM100-02-115-20 Corded Electrical Devices Used in the Passenger Cabin
PS-ANM100-00034 Requested Guidance Material for Certification of Slides and Slide/rafts (FAR 25.809)
PS-ANM100-00037 Yaw Angle for the Down Test in Dynamic Seat Test, 25.562
PS-ANM100-1981-00022 Separation of Control Systems
PS-ANM100-1981-00046 Policy Concerning Substantiation of Control Surface Tabs for FAR 25.629(d) and 25.629(d)(4)(vi); ASW-210 ltr of 2-5-81
PS-ANM100-1982-00124 Interpretation of FAR 25.801 (d), Ditching Approvals of transport Airplanes
09/29/2023 8100.18A Appendix C
Policy Number Title
PS-ANM100-1983-00043 Flyable Crack Limits in Primary Structures
PS-ANM100-1983-00101 Flyable Crack Limits in Primary Structures
PS-ANM100-1984-00039 Failsafe Tab Control Systems, FAR 25.629
PS-ANM100-1985-00017 Definition of Terms Used in FAR 25.1439
PS-ANM100-1985-00030 Life raft Requirements for Transport Category Airplanes
PS-ANM100-1986-00055 Structural Integrity Limits in Primary Aircraft Structure
PS-ANM100-1987-00016 Fire Containment Testing of Special Purpose Waste Receptacles
PS-ANM100-1987-00031 Location of Passenger Center of Gravity Above the Compressed Seat Cushion for Compliance With 25.561 and TSO-C39
PS-ANM100-1987-00033 Passenger capacities for combi airplanes with only one pair of exits
PS-ANM100-1987-00052 Rapid Decompression into Normally Unpressurized Areas
PS-ANM100-1988-00040 FAA Policy with Respect to Damage Tolerance of Engine Mounts
PS-ANM100-1989-00044 Guidance Concerning Continued Operational Safety and Airworthiness Directives (AD)
PS-ANM100-1989-00048 Policy Regarding Impact of Modifications and Repairs on the Damage Tolerance Characteristics of Transport Category Airplanes
PS-ANM100-1990-00042 Additional Guidance Concerning Continued Operational Safety and Airworthiness Directives (AD).
PS-ANM100-1991-00024 Access to Emergency Exits
PS-ANM100-1991-00025 Access to Type III Emergency Exits
PS-ANM100-1991-00029 Guidance for Incubators and Emergency Equipment
PS-ANM100-1991-00049 Policy Regarding Material Strength Properties and Design Values, 25.613.
PS-ANM100-1992-00045 Interpretation of FAA requirements concerning special structural factors for transport airplane interior components
PS-ANM100-1992-00050 Policy regarding open drill holes in primary fuselage structure. Ref. Detroit FSDO - Recommendation for Accident Prevention 90-203.
Policy Number Title
PS-ANM100-1993-00015 Guidance on Passenger Cabin Fire Extinguishers
PS-ANM100-1993-00023 Acceptance of Technical Standard Order (TSO) Holder's Data for Compliance with Part 25 Dynamic Testing Requirements.
PS-ANM100-1993-00027 Compliance with the Requirements of 25.811(c)
PS-ANM100-1993-00047 Policy regarding fail-safe features of structures designed to the damage tolerance requirements of 25.571
PS-ANM100-1993-00054 Revision of Multiple Burst Lightning Environment
PS-ANM100-1994-00028 Video monitors
PS-ANM100-1994-00032 Modifying the guidance in Advisory Circular (AC) 25-17 "Transport Airplane Cabin Interiors Crashworthiness Handbook"
PS-ANM100-1994-00035 Seat Strength Policy Regarding 25.562
PS-ANM100-1994-00059 Engine Inoperative Ten-Minute Takeoff Thrust/Power Rating (Revision to 6/28/94 Memorandum)
PS-ANM100-1995-00020 Policy regarding flight control jams for "normally encountered positions” 25.671(c)(3)
PS-ANM100-1995-00058 Go-Around Power/Thrust Settings on Transport Category Airplanes
PS-ANM100-1995-00104 The Role of Maintenance Computers in Exposure Time Assumptions for Quantitative Safety Analyses
PS-ANM100-1996-00036 Slide Cold Soak Test Protocol
PS-ANM100-1996-00121 FAA Policy Concerning Use of Dynamically Tested Seats in New or Modified Transport Category Airplanes
PS-ANM100-1996-00128 Simplified Procedure for Addressing the Head Injury Criteria of 25.562
PS-ANM100-1997-00111 Unusable Fuel Quantity for Gulfstream GV
PS-ANM100-1997-00122 Guidance for Demonstrating Compliance with Seat Dynamic Testing Deceleration Pulse Shapes
PS-ANM100-1997-00127 Side-Facing Seats on Transport Category Airplanes
PS-ANM100-1999-00021 Requirements of FAR 25.1357(e)
PS-ANM100-1999-00026 Additional Guidance on Seat Dynamic Testing
Policy Number Title
PS-ANM100-1999-00062 Airplane Operation with Air Conditioning Packs-Off
PS-ANM100-2000-00103 Certification Options for Class E Cargo Compartments on Aircraft having a Volume of 800 ft or less
PS-ANM100-2000-00118 Use of the Aircraft Materials Fire Test Handbook
PS-ANM100-2000-00123 Guidance for Demonstrating Compliance with Seat Dynamic Testing for Plinths and Pallets
PS-ANM100-2001-00109 Ram Air Turbine (RAT) Approval
PS-ANM100-2001-115-11 Certification of Strengthened Flightdeck Doors on Transport Category Airplanes
PS-ANM100-2001-116 Policy Statement with respect to All Electrical Attitude, Altitude, Direction and Airspeed Systems using Battery Standby Power
PS-ANM100-2002-00120 Compliance Questions and Answers with Respect to SFAR No. 88, Fuel Tank Safety, for Transport Category Airplanes
PS-ANM110-1998-00061 Wording Change to ACARS Airplane/Rotorcraft Flight Manuals
PS-ANM110-1999-115-99- 22 Transport Airplane Directorate Policy Regarding Methods Used to Determine the Likelihood of Catastrophic Failure Events
PS-ANM110-2001-115-32 Policy Statement with respect to use of Industry Standards in Seat Certification
PS-ANM111-1999-99-2 Guidance for Reviewing Certification Plans to Address Human Factors for Certification of Transport Airplane Flight Decks
Vision 100 - Century of Aviation
Vision 100 - Century of Aviation Reauthorization Act of 2003
TSO Title
TSO-C1e Cargo Compartment Fire Detection Instruments
TSO-C2d Airspeed Instruments
TSO-C3e Turn and Slip Instrument
TSO-C4c Bank and Pitch Instruments
TSO-C5f Direction Instrument, Non-Magnetic (Gyroscopically Stabilized)
TSO-C6e Direction Instrument, Magnetic (Gyroscopically Stabilized)
TSO-C7d Direction Instrument, Magnetic Non-Stabilized Type (Magnetic Compass)
TSO-C8e Vertical Velocity Instruments (Rate-Of-Climb)
TSO-C10c Pressure Altimeter System
TSO-C11e Powerplant Fire Detection Instruments (Thermal and Flame Contact Types)
TSO-C13g Life Preservers
TSO-C14b Aircraft Fabric, Intermediate Grade
TSO-C15d Aircraft Fabric, Grade A
TSO-C16b Electrically Heated Pitot and Pitot-Static Tubes
TSO-C19C Portable Water Solution Type Hand Fire Extinguisher
TSO-C20a Combustion Heaters and Accessories
TSO-C21b Aircraft Turnbuckle Assemblies and/or Turnbuckle Safe tying Devices
TSO-C22g Safety Belts
TSO-C23f Personnel Parachute Assemblies and Components
TSO-C25a Aircraft Seats and Berths (Type I Transport, 6g Forward Load)
TSO Title
TSO-C26d Aircraft Wheels, Brakes and Wheel/Brake Assemblies for Parts 23, 27 And 29 Aircraft
TSO-C27b Twin Seaplane Floats
TSO-C28 Aircraft Skis
TSO-C30c Aircraft Position Lights
TSO-C34e IIs Glide Slope Receiving Equipment Operating Within the Radio Frequency Range Of 328.6-335.4 Megahertz (MHz)
TSO-C35d Airborne Radio Marker Receiving Equipment
TSO-C36e Airborne IIs Localizer Receiving Equipment Operating Within the Radio Frequency Range Of 108-112 Megahertz (MHz)
TSO-C39b Aircraft Seats and Berths
TSO-C39c 9g Transport Airplane Seats Certified by Static Testing
TSO-C40c VOR Receiving Equipment Operating Within the Radio Frequency Range Of 108-117.95 Megahertz (MHz)
TSO-C41d Airborne Automatic Direction Finding (ADF) Equipment
TSO-C42 Propeller Feathering Hose Assemblies
TSO-C43d Temperature Instruments
TSO-C44c Fuel Flowmeters
TSO-C45b Manifold Pressure Instruments
TSO-C46a Maximum Allowable Airspeed Indicator Systems
TSO-C47a Fuel, Oil, And Hydraulic Pressure Instruments
TSO-C48a Carbon Monoxide Detector Instruments
TSO-C49b Electric Tachometer: Magnetic Drag (Indicator and Generator)
TSO-C54 Stall Warning Instruments
TSO Title
TSO-C55a Fuel and Oil Quantity Instruments
TSO-C56b Engine Driven Direct Current Generator / Starter Generators
TSO-C59b Airborne Selective Calling (SELCAL) Equipment
TSO-C62e Aircraft Tires
TSO-C63f Airborne Weather Radar Equipment
TSO-C64b Passenger Oxygen Mask Assembly, Continuous Flow
TSO-C66c Distance Measuring Equipment (DME) Operating Within the Radio Frequency Range Of 960-1215 Megahertz
TSO-C69c Emergency Evacuation Slides, Ramps, Ramp/Slides, And Slide/Rafts
TSO-C70b Life Rafts
TSO-C71 Airborne Static ("Dc to Dc") Electrical Power Converter (For Air Carrier Aircraft)
TSO-C72c Individual Flotation Devices
TSO-C73 Static Electrical Power Inverter
TSO-C74d Air Traffic Control Radar Beacon System (ATCRBS) Airborne Equipment
TSO-C76b Fuel Drain Valves
TSO-C77b Gas Turbine Auxiliary Power Units
TSO-C78a Crewmember Demand Oxygen Mask
TSO-C79 Fire Detectors (Radiation Sensing Type)
TSO-C80 Flexible and Oil Cell Material
TSO-C85b Survivor Locator Lights
TSO-C87a Airborne Low-Range Radio Altimeter
TSO Title
TSO-C88b Automatic Pressure Altitude Reporting Code-Generating Equipment
TSO-C89a Crewmember Oxygen Regulators, Demand
TSO-C90d Cargo Pallets, Nets and Containers (Unit Load Devices)
TSO-C90e Unit Load Devices
TSO-C92c Airborne Ground Proximity Warning Equipment
TSO-C93 Airborne Interim Standard Microwave Landing System Converter Equipment
TSO-C95a Mach Meters
TSO-C96a Anticollision Light Systems
TSO-C96b Anticollision Light Systems
TSO-C99a Flight Deck (Sedentary) Crewmember Protective Breathing Equipment
TSO-C100c Aviation Child Safety Device (ACSD)
TSO-C101 Over Speed Warning Instruments
TSO-C102 Airborne Radar Approach and Beacon Systems for Helicopters
TSO-C103 Continuous Flow Oxygen Mask Assembly (For Non-Transport Category Aircraft)
TSO-C104 Microwave Landing System (MLS) Airborne Receiving Equipment
TSO-C105 Optional Display Equipment for Weather and Ground Mapping Radar Indicators
TSO-C106a Air Data Computer
TSO-C109 Airborne Navigation Data Storage System
TSO-C110a Airborne Passive Thunderstorm Detection Equipment
TSO-C112f Air Traffic Control Radar Beacon System/Mode Select (ATCRBS /Mode S) Airborne Equipment
TSO Title
TSO-C113b Airborne Multipurpose Electronic Displays
TSO-C114 Torso Restraint Systems
TSO-C115d Required Navigation Performance (RNP) Equipment Using Multi-Sensor Inputs
TSO-C116a Crewmember Portable Protective Breathing Equipment
TSO-C117b Airborne Windshear Warning and Escape Guidance Systems for Transport Airplanes
TSO-C118a Traffic Alert and Collision Avoidance System (TCAS) Airborne Equipment, TCAS I
TSO-C119e Traffic Alert and Collision Avoidance System (TCAS) Airborne Equipment, TCAS II with Hybrid Surveillance
TSO-C121b Underwater Locating Devices (Acoustic) (Self-Powered)
TSO-C122a Equipment That Prevents Blocked Channels Used in Two-Way Radio Communications Due to Simultaneous Transmissions
TSO-C123c Cockpit Voice Recorder Equipment
TSO-C124c Flight Data Recorder Equipment
TSO-C126c 406 MHz Emergency Locator Transmitters (ELTS)
TSO-C127c Rotorcraft, Transport Airplane, And Small Airplane Seating Systems
TSO-C128a Equipment That Prevents Blocked Channels Used in Two-Way Radio Communications Due to Unintentional Transmissions
TSO-C132a Minimum Operational Performance Standards for Geosynchronous Orbit Aeronautical Mobile Satellite Services (AMSS) Avionics
TSO-C132b Minimum Operational Performance Standards for Geosynchronous Orbit Aeronautical Mobile Satellite Services (AMSS) Avionics
TSO-C135a Transport Airplane Wheels and Wheel and Brake Assemblies
TSO-C137a Aircraft Portable Megaphones
TSO-C139a Aircraft Audio Systems and Equipment
TSO-C140 Aerospace Fuel, Engine Oil, And Hydraulic Fluid Hose Assemblies
TSO Title
TSO-C141 Aircraft Fluorescent Lighting Ballast/Fixture Equipment
TSO-C142b Non-Rechargeable Lithium Cells and Batteries
TSO-C144a Passive Airborne Global Navigation Satellite System (GNSS) Antenna
TSO-C145e Airborne Navigation Sensors Using the Global Positioning System Augmented by The Satellite Based Augmentation System (SBAS)
TSO-C146e Stand-Alone Airborne Navigation Equipment Using the Global Positioning System Augmented by The Satellite Based Augmentation System (SBAS)
TSO-C147a Traffic Advisory System (TAS) Airborne Equipment
TSO-C148 Aircraft Mechanical Fasteners
TSO-C149 Aircraft Bearings
TSO-C150a Aircraft Seals
TSO-C151d Terrain Awareness and Warning Systems (TAWS)
TSO-C153a Integrated Modular Avionics (Ima) Platform and Modules
TSO-C154d Universal Access Transceiver (UAT) Automatic Dependent Surveillance-Broadcast (Ads-B) Equipment Operating on Frequency Of 978 MHz
TSO-C155b Recorder Independent Power Supply (Rips)
TSO-C157d Aircraft Flight Information Services-Broadcast (FIS-B) Data Link Systems and Equipment
TSO-C158 Aeronautical Mobile High Frequency Data Link (HFDL) Equipment
TSO-C159e, CHG 1
Next Generation Satellite Systems (NGSS) Equipment
TSO-C160a Very High Frequency (Vhf) Digital Link (VDL) Mode 2 Communications Equipment
TSO-C161b Ground Based Augmentation System Positioning and Navigation Equipment
TSO-C162b Ground Based Augmentation System Very High Frequency Data Broadcast Equipment
TSO-C163a VDL Mode 3 Communications Equipment Operating Within the Frequency Range 117.975-137.000 Megahertz
TSO Title
TSO-C164a Night Vision Goggles
TSO-C165b Electronic Map Display Equipment for Graphical Depiction of Aircraft Position (Own-Ship)
TSO-C166c Extended Squitter Automatic Dependent Surveillance - Broadcast (Ads-B) And Traffic Information Service - Broadcast (Tis-B) Equipment Operating on The Radio Frequency Of 1090 Megahertz (MHz)
TSO-C167 Personnel Carrying Device Systems (PODS), Also Known as Human Harnesses
TSO-C168 Aviation Visual Distress Signals
TSO-C169a Vhf Radio Communications Transceiver Equipment Operating Within Radio Frequency Range 117.975 To 137.000 Megahertz
TSO-C170 High Frequency (Hf) Radio Communications Transceiver Equipment Operating Within the Radio Frequency Range 1.5 To 30 Megahertz
TSO-C171 Aircraft Clamps
TSO-C172a Cargo Restraint Strap Assemblies
TSO-C173a Nickel-Cadmium, Nickel Metal-Hydride, And Lead-Acid Batteries
TSO-C174 Battery Based Emergency Power Unit (BEPU)
TSO-C175 Galley Cart, Containers and Associated Components
TSO-C176a Cockpit Image Recorder Equipment
TSO-C177a Data Link Recorder Equipment
TSO-C178a Aircraft Circuit Breakers
TSO-C179b Rechargeable Lithium Batteries and Battery Systems.
TSO-C184 Airplane Galley Insert Equipment, Electrical/Pressurized
TSO-C190 Active Airborne Global Navigation Satellite System (GUSS) Antenna
TSO-C194 Helicopter Terrain Awareness and Warning System (HTAWS)
TSO-C195c Avionics Supporting Automatic Dependent Surveillance - Broadcast (ADS-B) Aircraft Surveillance Applications (ASA)
TSO Title
TSO-C196b Airborne Supplemental Navigation Sensors for Global Positioning System Equipment Using Aircraft-Based Augmentation
TSO-C197 Information Collection and Monitoring Systems
TSO-C198 Automatic Flight Guidance and Control System (AFGCS) Equipment
TSO-C199 Traffic Awareness Beacon System (Tabs)
TSO-C200a Airframe Low Frequency Underwater Locating Device (Acoustic) (Self-Powered)
TSO-C201 Attitude and Heading Reference Systems (AHRS)
TSO-C202 Cargo Stopper Devices
TSO-C203 Fire Containment Covers (FCC)
TSO-C204a Circuit Card Assembly Functional Sensors Using Satellite-Based Augmentation System (SBAS) For Navigation and Non-Navigation Position/Velocity/Time Output.
TSO-C205a Circuit Card Assembly Functional Class Delta Equipment Using the Satellite-Based Augmentation System for Navigation Applications.
TSO-C206 Circuit Card Assembly Functional Sensors Using Aircraft-Based Augmentation for Navigation and Non- Navigation Position/Velocity/Time Output.
TSO-C207b Aeronautical Mobile Airport Communication System (AEROMACS) Airborne Mobile Station (AMS) Equipment
TSO-C209 Electronic Flight Instrument System (EFIS) Display
TSO-C210 Airborne Head Up Display (HUD)
TSO-C211 Detect and Avoid (DAA) Systems
TSO-C212 Air-To-Air Radar (ATAR) For Traffic Surveillance
TSO-C213a Unmanned Aircraft Systems Control and Non-Payload Communications Terrestrial Link System
TSO-C214 Functional TSO Equipment Using a TSO-C153A-Authorized Ima Platform(S) and/ Module(s)
TSO-C219 Airborne Collision Avoidance System (ACAS) XA/XO
TSO-C220 GNSS -Aided Inertial System
09/29/2023 8100.18A Appendix C
QMS DOCUMENTS
QMS documents are only applicable to the offices listed in the scope of the document. The C&A Division Director may authorize changes to QMS documents that are applicable to design approvals. The SO Division Director may authorize changes to QMS documents that are applicable to manufacturing.
Type Number Title
QMS process AIR-001-007 AIR Document Control Process
QMS Form AIR-001-007-F1 AIR QMS Document Justification and Approval Form
QMS process AIR-001-013 AIR Consistency and Standardization Initiative Process
QMS Deviation AIR-001-013 Approved Deviation
AIR CSI Approved Deviation for managing CSI actions outside of QMITs
QMS work instruction AIR-001-030-W1 AIR Continued Airworthiness Notification to the International Community (CANIC)
QMS Form AIR-001-030-F1 AIR Continued Airworthiness Notification to the International Community Template
QMS process AIR-002-022 Airworthiness Agreements IPA
QMS work instruction AIR-002-022-W2 Interagency Group on International Aviation (IGIA) Coordination
QMS work instruction AIR-002-022-W4 AIR Bilateral Technical Assessment Process
QMS work instruction AIR-002-022-W5 AIR Transfer of U.S. Type Certificates/Supplemental Type Certificates Outside the U.S.
QMS work instruction AIR-002-022-W7 AIR Response to European Aviation Safety Agency (EASA) Rulemaking
QMS work instruction AIR-002-022-W8 Sharing Sensitive Security Information (SSI) with Foreign Civil Aviation Authorities (FCAA)
QMS process AIR-002-023 Developing AIR Advisory Circulars (ACs), Directives and Policy Statements (PSs)
QMS process AIR-002-025 AIR Bilateral Relationship Assurance and Standardization System
QMS Form AIR-002-025-F1 AIR Bilateral Relationship Management Feedback Form
QMS work instruction AIR-002-033-W1 AIR Initial Responses to NTSB Safety Recommendations
Type Number Title
QMS process AIR-002-035 Aircraft Certification Service (AIR) Compliance and Enforcement Process
QMS Job Aid AIR-002-035-JA1 AIR Compliance and Enforcement Process Job Aid
QMS work instruction AIR-002-039-W1 AIR Delegated Signature Authority for Harmonized Rulemaking
QMS process AIR-002-043 Aircraft Certification Service Forms Management Process
QMS process AIR-002-045 AIR Technical Assistance Agreements
QMS work instruction AIR-002-083-W2 ODA Scorecard Work Instruction
QMS work instruction AIR-ACE-032-W1 Chicago Aircraft Certification Office Continued Operational Safety Program
QMS work instruction AIR-ACE-115A-050-W2 Atlanta ACO Type Inspection Authorization (TIA) Work Instruction
QMS work instruction AIR-ACE-115A-081-W1 Atlanta ACO Technical Standard Order Authorization Work Instruction
QMS work instruction AIR-ANE-050-W1 E&PD Work Instruction for Equivalent Level of Safety Memorandums
QMS work instruction AIR-ANE-071-W1 ANE Import Procedures for U.S. Standard Airworthiness Certificate
QMS work instruction AIR-ANE-082-W1 E&PD Type Validation Principles Work Instruction — Process for Creating Standards Difference and Validation Item Lists QMS work instruction AIR-ANE-110-031-W1 E&PD Special Airworthiness Information Bulletin Work Instruction
QMS work instruction AIR-ANM-004-W1 Transport Airplane Directorate (TAD) Extension Request for CARs/PARs/NCRs
QMS Form AIR-ANM-030-F1 Transport Category Airplane AD NPRM Prioritization Form
QMS work instruction AIR-ANM-037-W1 Transport Airplane Directorate Continued Operational Safety Program
QMS Form AIR-ANM-037-F1 TAD CARB Meeting Minutes Form
QMS work instruction AIR-ANM-050-W1 Transport Airplane Issue Paper Development and Approval
QMS work instruction AIR-ANM-050-W6 Transport Airplane Directorate (TAD) Action Stamp Work Instruction
QMS Deviation 860-21-0004 Deviation to AIR-ANM-050-W6
Type Number Title
QMS work instruction AIR-ANM-050-W7 Transport Airplane Directorate (TAD) Administrative Processes for the Reissuance of Type Certificates (TC) and Supplemental Type Certificates (STC) QMS work instruction AIR-ANM-082-W1 Creating Standards Differences Lists
QMS work instruction AIR-ANM-083-W1 TAD Supervision of ODA
QMS work instruction AIR-ASW-082-W1 Rotorcraft Directorate Type Validation Work Instruction – Process for Creating Standards Differences Lists
QMS work instruction AIR-700-CDS-W1 14CFR 21.3/183.63 Report Cloud Storage
QMS work instruction AIR-700-CPN-W1 Initiation of Certification Project Notification (CPN)
QMS work instruction AIR-700-TAB-W1 Technical Advisory Board Work Instruction
QMS boundaries doc AVS-001-007-F2 AIR External Document Matrix
AVS level QMS Document AVS-002-005 Aircraft Certification and Operational Evaluations
09/29/2023 8100.18A Appendix D
Appendix D. Additional Clarification
1. Order 8040.1C, Airworthiness Directives, Order 8040.5 Airworthiness Directive Process for Mandatory Continuing Airworthiness Information, and IR-M 8040.1C, Airworthiness Directives Manual.
a. All references to responsibility for assigning airworthiness directive (AD) numbers, amendment numbers, and the final printing and distribution of all ADs, including the compilation and coordination of the Summary of ADs, focal for the exchange of airworthiness information with foreign Civil Aviation Authorities, logging all Mandatory Continuing Airworthiness Information (MCAI) into the MCAI national database, maintaining the MCAI national database, issuing and reviewing MCAI status report and an MCAI open records report, and sending electronic versions of the MCAI and the referenced service information are replaced and understood to be the responsibility of the applicable C&A or ICM Division.
b. The applicable project officer from the Certification Engagement Branch, AIR-610, will be the project officer involved in AD review and coordination.
c. Order IR-M 8040.1C, chapter 7, paragraph 3: When assigning directorate identifiers continue to use the two-letter designator for the geographic region of the action office that initiates the AD action.
2. Order 8100.8D, Designee Management Handbook. Order 8100.8D is now only used as the model and criteria for ODA holders to select unit members as required by 8100.15B. All other content applicable to individual designee management is replaced by 8000.95B Designee Management Policy.
3. Order 8100.15B, Change 3, Organization Designation Authorization Procedures. Paragraph 16-3(c), on page 16-1: When assigning ODA numbers, continue to use directoratebased geographic codes.
4. Order 8110.4C, Change 6, Type Certification. Any director or executive director may authorize a special certification review.
5. Order 8110.37F, Designated Engineering Representative (DER) Handbook.
a. Replace ACO with Compliance and Airworthiness (C&A) Division, AIR-700 or Integrated Certificate Management (ICM) Division, AIR-500, as applicable.
b. The managing branch for FA DERs and FTP DERs is the Flight Test & Human Factors Branch, AIR-710.
6. Order 8110.100B, Special Airworthiness Information Bulletin. Replace references to AIR Headquarters with the Policy and Standards (P&S) Division.
7. Order 8120.16A, Suspected Unapproved Parts Program. Replace references to AIR-100 with AIR-600.
8. Order 8120.22A, Production Approval Procedures.
a. Directorate Office means the Certificate Management Branch.
b. Directorate Manager means the Division Director of System Oversight Division.
9. Order 8120.23A, Certificate Management of Production Approval Holders. Paragraph 3-27(b): When assigning the QSA number use these codes: EB for East Certificate Management Branch (AIR-850), CB for Central Certificate Management Branch (AIR-860), WB for West Certificate Management Branch (AIR-870), and CM for System Operation & Oversight Branch (AIR-580).
10. Order 8000.95B, Designee Management Policy. The Organization Designation Authorization (ODA) Office, AVS-60, has the authority to revise or cancel material in this order. AVS-60 will be responsible for the content of volume 1, and AIR-600, identified in table 1-1 of the order will remain responsible for the content of volumes 8 and 9.
11. AC 20-66B, Propeller Vibration and Fatigue. The directorate project officer will be the responsible project officer from the Policy & Standards (P&S) Division, AIR-600.
8100.18A Appendix D
09/29/2023 8100.18A Appendix E
Appendix E. Information Technology Tools
Reviewed applications evaluated to receive updates as of April 2023: 1. Accident Lessons Learned (ALL) 2. AIR AITS Cost Center updates 3. AIR Award Tool updates 4. AIR CASTLE/LDR administrative updates 5. AIR FAA Webpage updates 6. AIR Network Drive (AIR Share) changes 7. AIR SharePoint/KSN Site & Dashboard updates 8. AIR Work Tracking System (WTS) 9. Airworthiness Directives Notification System (ADNS) 10. Analyze Safety-Performance Insight-Results Environment (ASPIRE) 11. Aviation Safety Knowledge Management Environment (ASKME) Reporting – Airworthiness Certification (AWC) 12. ASKME-Airworthiness Directives Development (ADD) 13. ASKME-Aircraft Certification Audit Information System (ACAIS) 14. ASKME-Monitor Safety & Analyze Data (MSAD) 15. ASKME-Risk-Based Resource Targeting (RBRT) 16. ASKME-Work Activity Tracking (WAT) 17. ASKME-Enterprise Services (ES) 18. ASKME-Reporting Center (ARC) 19. ASKME - Compliance and Enforcement Actions (CEA) 20. Certification Project Notification (CPN) 21. Designee Management System (DMS) 22. Engineering Infrastructure Services (EIS) 23. National Automated Conformity Inspection Process (NACIP) 24. National Flight Test Database (NFTDB) 25. Nonconformity and Corrective Action (NCA) Reporting and Tracking (QUASAR) 26. Unmanned Aircraft Systems Declaration of Compliance (UAS DOC)
09/29/2023 8100.18A Appendix F
Appendix F. Directive Feedback Information
Please submit any written comments or recommendation for improving this directive or suggest new items or subjects to be added to it. Also, if you find an error, please tell us about it.
Subject: Order 8100.18A, Aircraft Certification Service Organizational Realignment and Refinement References
To: Directive Management Officer at 9-AVS-AIR-Directives Management Officer (FAA),
(Please mark all appropriate line items)
☐ An error (procedural or typographical) has been noted in paragraph … on page …
☐ Recommend paragraph … on page … be changed as follows: (attach separate sheet if necessary)
☐ In a future change to this order, please include coverage on the following subject:
(briefly describe what you want added.)
☐ Other comments:
☐ I would like to discuss the above. Please contact me.
Submitted by: … Date: …
Telephone Number: … Routing Symbol: … FAA Form 1320-19 (08/21) Supersedes Previous Edition