Order 8000.95B Designee Management Policy
This order establishes policy for integrated designee management across the Office of Aerospace Medicine (AAM), Aircraft Certification Service (AIR), Flight Standards Service (FS), and Air Traffic Safety Oversight Service (AOV) as well as the use of the Designee Management System (DMS), which is a web-based tool designed to standardize the management of designees.
This document is cancelled. Cancelled by 8000.95C. Check the official source before relying on it.
Distribution: Electronic Only Initiated By: AFX-1
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
National Policy
ORDER 8000.95B
Effective Date:
4/12/22
SUBJ: Designee Management Policy
This order is a comprehensive publication establishing policy and procedures for managing all aspects of certain representatives of the Administrator including selection, appointment, orientation, training, oversight, suspension, and termination. This order represents a consolidation of existing policies across Aviation Safety (AVS) Services and Offices: Aircraft Certification Service (AIR), Flight Standards Service (FS), and the Office of Aerospace Medicine (AAM); and new policies within the Air Traffic Safety Oversight Service (AOV). This order also establishes the Designee Management System (DMS), which is a web-based tool designed to standardize the management of designees.
Chris Rocheleau Acting Associate Administrator for Aviation Safety
Table of Contents
ii
Table of Contents
Chapter Page
Volume 1. Common Designee Policy … 1-1
Chapter 1. General Information … 1-1 Chapter 2. Application Process … 1-7 Chapter 3. Selection and Evaluation of a Designee Applicant … 1-10 Chapter 4. Designee Appointment … 1-12 Chapter 5. Responsibilities and Obligations of a Designee … 1-13 Chapter 6. Oversight and Management of a Designee … 1-15 Chapter 7. Training … 1-22 Chapter 8. Annual Request for Extension of a Designee’s Designation … 1-23 Chapter 9. Termination of a Designation … 1-25 Chapter 10. Suspension of a Designation … 1-29 Chapter 11. Appealing a Termination for Cause … 1-31 Chapter 12. Other Designee Management Functions … 1-33 Chapter 13. Administrative Information … 1-35
Volume 2. AME Designee Policy … 2-1
Chapter 1. Introduction … 2-1 Chapter 2. Application Process … 2-2 Chapter 3. Selection and Evaluation of a Designee Applicant … 2-5 Chapter 4. Designee Appointment … 2-7 Chapter 5. Responsibilities and Obligations of a Designee … 2-10 Chapter 6. Oversight and Management of a Designee … 2-13 Chapter 7. Training … 2-19 Chapter 8. Annual Request for Extension of a Designee’s Designation … 2-22 Chapter 9. Termination of a Designation … 2-23 Chapter 10. Suspension of a Designation … 2-26 Chapter 11. Appealing a Termination for Cause … 2-27 Chapter 12. Other Designee Management Functions … 2-28
Volume 3. DPE, Admin PE, and SAE Designee Policy … 3-1
Chapter 1. General Information … 3-1 Chapter 2. Application Process … 3-11 Chapter 3. Selection and Evaluation of a Designee Applicant … 3-22 Chapter 4. Designee Appointment … 3-26 Chapter 5. Responsibilities and Obligations of a Designee … 3-28 Chapter 6. Oversight and Management of a Designee … 3-34 Chapter 7. Training … 3-50 Chapter 8. Annual Request for Extension of a Designee’s Designation … 3-54 Chapter 9. Termination of a Designation … 3-55 Chapter 10. Suspension of a Designation … 3-56 Chapter 11. Appealing a Termination for Cause … 3-57 Chapter 12. Other Designee Management Functions … 3-58
iii
Volume 4. DADE Designee Policy … 4-1
Chapter 1. General Information … 4-1 Chapter 2. Application Process … 4-5 Chapter 3. Selection and Evaluation of a Designee Applicant … 4-8 Chapter 4. Designee Appointment … 4-14 Chapter 5. Responsibilities and Obligations of a Designee … 4-16 Chapter 6. Oversight and Management of a Designee … 4-22 Chapter 7. Training … 4-34 Chapter 8. Annual Request for Extension of a Designee’s Designation … 4-39 Chapter 9. Termination of a Designation … 4-40 Chapter 10. Suspension of a Designation … 4-41 Chapter 11. Appealing a Termination for Cause … 4-42 Chapter 12. Other Designee Management Functions … 4-43
Volume 5. DME, DPRE, and DAR-T Designee Policy … 5-1
Chapter 1. General Information … 5-1 Chapter 2. Application Process … 5-12 Chapter 3. Selection and Evaluation of a Designee Applicant … 5-22 Chapter 4. Designee Appointment … 5-26 Chapter 5. Responsibilities and Obligations of a Designee … 5-29 Chapter 6. Oversight and Management of a Designee … 5-36 Chapter 7. Training … 5-54 Chapter 8. Annual Request for Extension of a Designee’s Designation … 5-57 Chapter 9. Termination of a Designation … 5-58 Chapter 10. Suspension of a Designation … 5-59 Chapter 11. Appealing a Termination for Cause … 5-60 Chapter 12. Other Designee Management Functions … 5-61
Volume 6. APD Designee Policy … 6-1
Chapter 1. General Information … 6-1 Chapter 2. Application Process … 6-7 Chapter 3. Selection and Evaluation of a Designee Applicant … 6-9 Chapter 4. Designee Appointment … 6-13 Chapter 5. Responsibilities and Obligations of a Designee … 6-15 Chapter 6. Oversight and Management of a Designee … 6-19 Chapter 7. Training … 6-28 Chapter 8. Annual Request for Extension of a Designee’s Designation … 6-31 Chapter 9. Termination of a Designation … 6-32 Chapter 10. Suspension of a Designation … 6-33 Chapter 11. Appealing a Termination for Cause … 6-34 Chapter 12. Other Designee Management Functions … 6-35
Volume 7. TCE Designee Policy … 7-1
Chapter 1. General Information … 7-1 Chapter 2. Application Process … 7-8 Chapter 3. Selection and Evaluation of a Designee Applicant … 7-13 Chapter 4. Designee Appointment … 7-18
iv
Chapter 5. Responsibilities and Obligations of a Designee … 7-20 Chapter 6. Oversight and Management of a Designee … 7-26 Chapter 7. Training … 7-38 Chapter 8. Annual Request for Extension of a Designee’s Designation … 7-43 Chapter 9. Termination of a Designation … 7-44 Chapter 10. Suspension of a Designation … 7-45 Chapter 11. Appealing a Termination for Cause … 7-46 Chapter 12. Other Designee Management Functions … 7-47
Volume 8. DMIR and DAR-F Designee Policy … 8-1
Chapter 1. General Information … 8-1 Chapter 2. Application Process … 8-2 Chapter 3. Selection and Evaluation of a Designee Applicant … 8-14 Chapter 4. Designee Appointment … 8-17 Chapter 5. Responsibilities and Obligations of a Designee … 8-21 Chapter 6. Oversight and Management of a Designee … 8-23 Chapter 7. Training … 8-32 Chapter 8. Annual Request for Extension of a Designation … 8-34 Chapter 9. Termination of a Designation … 8-35 Chapter 10. Suspension of a Designation … 8-39 Chapter 11. Appealing a Termination for Cause … 8-41 Chapter 12. Other Designee Management Functions … 8-42
Volume 9. DER Designee Policy … 9-1
Chapter 1. General Information … 9-1 Chapter 2. Application Process … 9-5 Chapter 3. Selection and Evaluation of a Designee Applicant … 9-17 Chapter 4. Designee Appointment … 9-20 Chapter 5. Responsibilities and Obligations of a Designee … 9-23 Chapter 6. Oversight and Management of a Designee … 9-24 Chapter 7. Training … 9-31 Chapter 8. Annual Request for Extension of a Designee’s Designation … 9-33 Chapter 9. Termination of a Designation … 9-34 Chapter 10. Suspension of a Designation … 9-35 Chapter 11. Appealing a Termination for Cause … 9-36 Chapter 12. Other Designee Management Functions … 9-37
Volume 10. DCTO-E Designee Policy … 10-1
Chapter 1. General Information … 10-1 Chapter 2. Application Process … 10-2 Chapter 3. Selection and Evaluation of a Designee Applicant … 10-4 Chapter 4. Designee Appointment … 10-6 Chapter 5. Responsibilities and Obligations of a Designee … 10-8 Chapter 6. Oversight and Management of a Designee … 10-10 Chapter 7. Training … 10-17 Chapter 8. Renewal of Designee Appointment … 10-20 Chapter 10. Suspension of a Designation … 10-22
List of Tables
v
Chapter 11. Appealing a Termination for Cause … 10-23 Chapter 12. Other Designee Management Functions … 10-24
Appendix A. Definitions … A-1 Appendix B. Acronym List … B-1
List of Tables
Table Page
Table 1-1. Offices Responsible for Designee Policy … 1-2 Table 1-2. Overall Performance Result … 1-18 Table 3-1. Types of Designees … 3-2 Table 3-2. Certificate Level Testing/Checking Authorizations … 3-3 Table 3-3. Aircraft Category/Class/Privileges Testing/Checking Authorizations … 3-5 Table 3-4. Administrative Authorizations … 3-7 Table 3-5. Specific Eligibility Requirements for Designation as a PE and/or a CE … 3-15 Table 3-6. Specific Eligibility Requirements for Designation as an LAE, a CIRE,
an ATPE, a PPE, and/or a Type Rating Examiner … 3-16 Table 3-7. Specific Eligibility Requirements for Designation as an SPE … 3-17 Table 3-8. Specific Eligibility Requirements for Designation as a VAE, VFEE, and EAE ... 3-19 Table 3-9. PIC Experience Requirements … 3-31 Table 5-1. Standard Airworthiness Certification Function Codes … 5-2 Table 5-2. Standard Airworthiness Certification Function Codes—Primary and
Restricted Categories … 5-3 Table 5-3. Limited Category Function Codes … 5-4 Table 5-4. Experimental Category for the Purposes of Market Survey, R&D, or Crew
Training Function Codes … 5-4 Table 5-5. Experimental Category for the Purposes of Exhibition and/or Air Racing
Function Codes … 5-5 Table 5-6. Experimental Category for the Purposes of Operating Amateur-Built Aircraft
Function Codes … 5-6 Table 5-7. Light-Sport Category and Experimental Category for the Purpose of Operating
Light-Sport Aircraft Function Codes … 5-7 Table 5-8. Export Approvals Function Codes … 5-8 Table 5-9. Domestic Approval of Engines, Propellers, and Articles Function Codes … 5-8 Table 5-10. Other Authorizations Function Codes … 5-9 Table 6-1. Certificate Level Testing Authorizations … 6-2 Table 6-2. Aircraft Category and Class Authorizations … 6-2 Table 6-3. Administrative Authorizations … 6-3 Table 6-4. Special Authorizations … 6-3 Table 6-5. FAA-Conducted Training and Meeting Requirements … 6-29 Table 7-1. Certificate Level Testing and Checking Authorizations … 7-2 Table 7-2. Aircraft Category and Class Authorizations … 7-3 Table 7-3. Administrative Authorizations … 7-4 Table 7-4. Special Authorizations … 7-5 Table 7-5. TCE Training Requirements … 7-39
List of Figures
vi
Table 7-6. FAA-Conducted Training and Meeting Requirements … 7-41 Table 8-1. Minimum Qualification Requirements … 8-6 Table 10-1. FAA-Conducted Training and Meeting Requirements … 10-18 Table A-1. Designee Management Definitions—Common … A-1 Table A-2. Designee Management Definitions—AME … A-3 Table A-3. Designee Management Definitions—DPE, Admin PE, and SAE … A-4 Table A-4. Designee Management Definitions—DADE … A-6 Table A-5. Designee Management Definitions—DME, DPRE, and DAR-T … A-6 Table A-6. Designee Management Definitions—APD … A-8 Table A-7. Designee Management Definitions—TCE … A-8 Table A-8. Designee Management Definitions—DMIR and DAR-F … A-9 Table A-9. Designee Management Definitions—DER … A-12
List of Figures
Figure Page
Figure 3-1. High-Level Selection Process Flow … 3-22 Figure 3-2. High-Level Appointment Process Flow … 3-26 Figure 4-1. High-Level Selection Process Flow … 4-8 Figure 4-2. High-Level Appointment Process Flow … 4-14 Figure 4-3. DADE Checklist … 4-20 Figure 4-4. Sample Designated Aircraft Dispatcher Examiner Surveillance Checklist … 4-33 Figure 4-5. Sample Annual Meeting—Combined Safety Standardization Meeting,
FAA Briefing, and Recurrent Training Agenda … 4-37 Figure 5-1. High-Level Selection Process Flow … 5-22 Figure 5-2. High-Level Appointment Process Flow … 5-26 Figure 5-3. Designee Post-Activity Attachments … 5-53 Figure 6-1. High-Level Selection Process Flow … 6-9 Figure 6-2. High-Level Appointment Process Flow … 6-13 Figure 7-1. High-Level Selection Process Flow … 7-13 Figure 7-2. High-Level Appointment Process Flow … 7-18 Figure 8-1. High-Level Selection Process Flow … 8-14 Figure 8-2. High-Level Appointment Process Flow … 8-17 Figure 8-3. Performance Measures and Oversight Activity Results … 8-26 Figure 10-1. High-Level Selection Process Flow … 10-4 Figure 10-2. High-Level Appointment Process Flow … 10-6 Figure 10-3. Performance Measures and Oversight Activity Results … 10-14
Section 1. Introduction › 6. Implementation.
VOLUME 1. COMMON DESIGNEE POLICY
Chapter 1. General Information
Section 1. Introduction
1. Purpose of This Order. This order establishes policy for integrated designee management across the Office of Aerospace Medicine (AAM), Aircraft Certification Service (AIR), Flight Standards Service (FS), and Air Traffic Safety Oversight Service (AOV) as well as the use of the Designee Management System (DMS), which is a web-based tool designed to standardize the management of designees.
a. This order consolidates orders across Aviation Safety (AVS) Services and Offices and establishes a common policy section for all designees and provides respective volumes for the specific designee types. These policy changes are global in nature and, therefore, are not listed individually.
b. All users of this order must familiarize themselves with its contents and comply with the instructions and guidance contained herein. Many of the procedural functions are not included in the order since they are now incorporated into the functionality of DMS.
2. Audience. The primary audience for this order is AVS designees, Federal Aviation Administration (FAA) managing specialists, and FAA personnel who may interact with designees or designee programs, including FAA management, operational, and administrative employees as appropriate. The secondary audience is persons seeking to become designees.
3. Where You Can Find This Order. You can find this order on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices, the Flight Standards Information Management System (FSIMS) at https://fsims.avs.faa.gov, and the Dynamic Regulatory System (DRS) at https://drs.faa.gov. Operators and the public can find this order on the FAA’s website at https://www.faa.gov/regulations_policies/orders_notices, FSIMS at https://fsims.faa.gov, and the DRS.
4. What This Order Cancels. This order cancels FAA Order 8000.95A, Designee Management Policy, dated December 7, 2020.
5. How This Order Is Organized. This order contains ten volumes. Volume 1 contains common policy applicable to all AVS designee types. Volumes 2 through 10 contain policy applicable to specific designee types. Together, these volumes represent the designee management policy for AVS designees, excluding holders of Organization Designation Authorization (ODA).
6. Implementation. Compliance with this order will be phased in by designee type(s) and achieved in accordance with the implementation plans established by each Service/Office for their respective designee types. Implementation will involve transition from existing management and information systems and designee management policies to the DMS policy and automation. Affected employees and designees will be notified through directive/memo or other means of communication when each implementation will begin and end, as well as when full
a. Directive Information. › (2) The use of these terms does not allow for flexibility.
compliance with this policy is required. FAA employee access and designee login credentials and instructions will be provided at the beginning of each implementation. Timing for release and completion of each implementation plan will depend upon:
a. Availability of the DMS policy and automation for the respective designee type.
b. Completion of transition training in the electronic Learning Management System (eLMS) by the managing specialist and their respective management officials, if required.
7. Authority to Change This Order. AAM, AIR, FS, and AOV have the authority to revise material in this order. Depending on the change, the appropriate office (AAM, AIR, FS, or AOV) will initiate the change and coordinate with the other organizations to ensure consistency with DMS policy. Requests to deviate from this order will be sent to the responsible AVS Service/Office for evaluation and approval/disapproval. Deviation requests affecting more than one organization or that may require changes to the automation will be coordinated across the affected organizations and with the DMS program office.
8. Responsible Offices for Designee Policy.
Table 1-1. Offices Responsible for Designee Policy
Designee Type Office Aviation Medical Examiner (AME) AAM-400 Aircrew Program Designee (APD) AFS-600 Designated Aircraft Dispatcher Examiner (DADE) AFS-600 Training Center Evaluator (TCE) AFS-600 Designated Mechanic Examiner (DME), Designated Parachute Rigger Examiner (DPRE), and Designated Airworthiness Representative—Maintenance (DAR-T)
AFS-600
Designated Pilot Examiner (DPE), Administrative Pilot Examiner (Admin PE), and Specialty Aircraft Examiner (SAE)
AFS-600
Designated Engineering Representatives (DER) AIR-600 Designated Airworthiness Representative—Manufacturing (DAR-F) and Designated Manufacturing Inspection Representative (DMIR)
AIR-600
Designated Control Tower Operator Examiner (DCTO-E) AOV-200
9. Directive and Guidance Information.
a. Directive Information.
(1) This type of information is directive in nature and contains terms such as “shall,” “will,” or “must.” These words indicate that the actions are mandatory. “Shall not” prohibits the action.
(2) The use of these terms does not allow for flexibility.
Section 2. Designee Overview › 2. Vision of Delegation Management Programs.
b. Guidance Information.
(1) This type of information is considered guidance and contains terms such as “should,” “can,” or “may.”
(2) These terms indicate actions that may not be mandatory; however, they are strongly encouraged, permissive, and allow flexibility.
10. Designation of a Designee Authorization.
a. Power to Delegate. Title 49 of the United States Code (49 U.S.C.) § 44702 empowers the Administrator to “...delegate to a qualified private person, or to an employee under the supervision of that person, a matter related to the examination, testing, and inspection necessary to issue a certificate under this chapter; and issuing the certificate.”
b. Designation Authority. Title 14 of the Code of Federal Regulations (14 CFR) Part 183, Representatives of the Administrator, prescribes the requirements for designating a private person or an organization to act as a representative of the Administrator.
11. Employee Status. A designee is not considered an employee of the U.S. Government and is not federally protected for the work performed or the decisions made as a designee.
12. Role of DMS. DMS will collect, store and process data and information associated with designees and the designee management processes in accordance with FAA recordkeeping requirements. DMS may utilize information from other FAA systems where appropriate and other FAA systems may utilize information from DMS where appropriate.
13. Technical Support. For questions regarding the operation of DMS, contact the AVS National IT Service Desk at 844-322-6948 or via email at [email protected]. For non-system-related questions, please visit the DMS web page to find the email addresses for various designee types.
Section 2. Designee Overview
1. Legal Authority. Title 49 U.S.C. § 44702(d) is the statutory authority to delegate private persons to perform certain authorized functions on behalf of the FAA. These persons are called designees. The designee’s function is vital to enhancing the FAA’s public service role and improving overall safety in the National Airspace System (NAS). The FAA appoints designees to provide airman and aircraft certifications and other services to the public in accordance with FAA policy, guidance, and regulations.
2. Vision of Delegation Management Programs. The FAA delegation programs leverage agency resources; respond to changes in workloads and aviation industry needs; demand the highest technical and ethical standards from designees; and ensure public, governmental, and industry confidence in aviation safety through strict compliance with certification policies and regulations.
(2) Administrative Pilot Examiners (Admin PE). › (a) Airman Certification Representative (ACR) for a 14 CFR Part 141…
3. Designation Principles. The FAA bases the designation programs on the following principles, which are implicit in the day-to-day management of these programs:
a. Privilege. Designation is a privilege, not a right. The FAA may rescind a designation at any time for any reason the Administrator considers appropriate.
b. Knowledgeable. Designees must be knowledgeable, qualified, and competent.
c. Risk-Based Approach. Management of designation programs must employ a risk-based approach.
d. Essential. Designation programs are essential.
e. Need and Ability. A need for and ability to manage a designee must exist for all designees.
4. Designee Types Covered by This Order. Specific designee types covered by this order include:
a. Office of Aerospace Medicine (AAM).
(1) Aviation Medical Examiner (AME).
(a) Civilian.
(b) Military.
(c) Federal.
(d) Official.
b. Flight Standards Service (FS).
(1) Air Transportation Designee.
(a) Aircrew Program Designee (APD).1
1 For purposes of this order, the term “Aircrew Program Designee” encompasses “aircrew designated examiners” in 14 CFR part 121.
(b) Designated Aircraft Dispatcher Examiner (DADE).
(c) Training Center Evaluator (TCE).
(2) Administrative Pilot Examiners (Admin PE).
(a) Airman Certification Representative (ACR) for a 14 CFR Part 141 Pilot School with Examining Authority (ACR-141).
(b) ACR for a Flight Instructor Refresher Course (ACR-FIRC).
(2) Airworthiness Designee. › (a) DAR—Manufacturing (DAR-F).
(3) Designated Pilot Examiner (DPE).
(a) Private Pilot Examiner (PE).
(b) Commercial Pilot Examiner (CE).
(c) Commercial and Instrument Rating Examiner (CIRE).
(d) Flight Instructor Examiner (FIE).
(e) Pilot Proficiency Examiner (PPE).2
2 The FAA uses the DMS to authorize individuals to conduct pilot proficiency checks under 14 CFR part 61, § 61.58(d)(1).
(4) Specialty Aircraft Examiners (SAE).
(a) Sport Pilot Examiner (SPE).
(b) Sport Pilot Flight Instructor Examiner (SPFIE).
(c) Experimental Aircraft Examiner (EAE).
(d) Vintage Flight Engineer Examiner (VFEE).
(e) Vintage Aircraft Examiner (VAE).
(f) Limited Aircraft Examiner (LAE).
(5) Designated Airworthiness Representative (DAR)—Maintenance (DAR-T).
(6) Designated Mechanic Examiner (DME).
(7) Designated Parachute Rigger Examiner (DPRE).
c. Aircraft Certification Service (AIR).
(1) Designated Engineering Representatives (DER).
(a) Company (DER-Y).
(b) Consultant (DER-T).
(2) Airworthiness Designee.
(a) DAR—Manufacturing (DAR-F).
Section 3. Minimum Qualifications Overview › 1. Minimum Qualifications of Managing Specialists.
(b) Designated Manufacturing Inspection Representative (DMIR).
d. Air Traffic Safety Oversight Service (AOV). Designated Control Tower Operator Examiner (DCTO-E).
5. Risk-Based Principles.
a. Risk-Based Management. Risk-based management is a continuous process of identifying, analyzing, evaluating, controlling, and monitoring risks that exist with the designee program. DMS captures and manages the data, including the substantiation and documentation of the decisions.
b. Risk Management Strategy (RMS). RMS provides the managing specialist with a methodology for managing hazards and the associated risks related to designee performance. DMS provides the managing specialist with a means to document and track the performance of a designee utilizing the oversight module. The oversight module allows the managing specialist to review and evaluate the disposition of any risks associated with discrepancy findings. This methodology may include the following:
(1) Identifying the discrepancy and determining the hazard;
(2) Analyzing and assessing the risk;
(3) Making a decision;
(4) Implementing the decision; and
(5) Monitoring the effectiveness of the decision.
6. Performance. Throughout the oversight process for each designee, there are both automated and manually initiated determinations that are documented that may trigger specific actions by the managing specialist. Using risk-based principles provides a comprehensive method of managing designees.
Section 3. Minimum Qualifications Overview
1. Minimum Qualifications of Managing Specialists. The minimum qualifications for managing specialists are established by the responsible offices for designee policy. See Chapter 1, General Information, of each volume of the designee type-specific volumes for details.
a. Minimum Qualifications. The designee applicant must: › (2) Be at least 23 years of age.
Chapter 2. Application Process
1. Purpose. This chapter describes the designee application process. This chapter and the corresponding designation type-specific volumes constitute the application process policy.
2. General.
a. Application Information. To learn about the designee management program and/or initiate the designee application process, qualified individuals should access the FAA Designee website at https://www.faa.gov/other_visit/aviation_industry/designees_delegations/dms/.
b. Eligibility. Anyone may apply to be a designee; however, DMS will not accept applications from the following:
(1) Current FAA employees.
(2) Former designees who have been terminated for cause.
c. Multiple Designee Types.
(1) The FAA may appoint an individual to more than one type of designation. Once appointed, any designee holding multiple designations will have only one designee number.
(2) Designee applicants must complete a separate application for each designation type sought. Each designation is a separate appointment.
d. References. The applicant may provide the following:
(1) Three verifiable character references to substantiate that the applicant possesses integrity and sound judgment.
(2) Three verifiable technical references to substantiate that the applicant possesses the required technical expertise for the designation sought. These references may be the same individuals used as character references.
3. Qualifications. In addition to the requirements in subparagraph 2b above, applicants may also have additional eligibility requirements which can be found in the appropriate designation type-specific volumes of this order.
a. Minimum Qualifications. The designee applicant must:
(1) Meet FAA English language standards as described in Advisory Circular (AC) 60-28, FAA English Language Standard for an FAA Certificate Issued Under 14 CFR Parts 61, 63, 65, and 107; and
(2) Be at least 23 years of age.
Chapter 2. Application Process › 5. Privilege, Not a Right.
b. Character. At all times, the designee applicant must:
(1) Have a high degree of integrity, even when not exercising their delegated authority;
(2) Have a cooperative attitude;
(3) Be able to exercise sound judgment;
(4) Be engaged in the aviation industry;
(5) Have a reputation for dependability and professionalism; and
(6) Be able to maintain the highest degree of objectivity while performing authorized functions.
c. Technical Experience. The applicant must have up-to-date extensive knowledge and experience that is pertinent to the designation being sought.
d. FAA Interaction. Any previous working relationship the applicant had with the FAA must have been positive.
4. Disqualifiers. Applicants will be disqualified for any of the following reasons:
a. Terminated for Cause. See Chapter 9, Termination of a Designation, for details.
b. Convictions and Felonies. Having, within the past 7 years:
(1) Been convicted of any violation of any local, state, or Federal law pertaining to drugs or alcohol.
(2) Been convicted of any felony offenses. A felony offense is considered a conviction where the punishment could have been greater than 1 year regardless of the sentence.
(3) Been imprisoned, been on probation, or is on parole because of a felony conviction (including civilian or military felonies, firearms, or explosive violations).
(4) Been other than “honorably” discharged from the military.
(5) Had an airman certificate (other than medical), rating, or authorization (or foreign equivalent) suspended, revoked, or paid a civil penalty as a result of a violation of any FAA or other Civil Aviation Authority (CAA) regulations (foreign or domestic).
c. Current Disqualifiers. Is currently under investigation, charged indictments, or has a pending action for the items described in subparagraph 4b of this chapter.
5. Privilege, Not a Right. Successfully meeting the minimum qualifications does not guarantee appointment as a designee. During the application process in DMS, the designee applicant will be required to acknowledge the following in DMS:
6. Post-Application. › d. Cancellation. A designee applicant may cancel an application at any…
a. Designation is a privilege, not a right.
b. The FAA can terminate any designation at any time, for any reason the Administrator considers appropriate.
6. Post-Application.
a. Retention of Application Data. DMS saves all application data in accordance with FAA Order 1350.14, Records Management.
b. Notification. DMS will automatically notify designee applicants regarding the status of their application by sending a generic email to check the DMS message center. This email is sent to the email address provided during the registration/application process.
c. Updating Applications. Applicants must update their applications whenever information changes and they must validate and verify the application data at least every 12 calendar-months. Failure to maintain up-to-date information may affect selection eligibility and appointment as a designee. An application that is updated will remain active in DMS until the applicant is selected or cancels the application.
d. Cancellation. A designee applicant may cancel an application at any time, for any reason, in DMS.
b. Considerations for Determining Ability to Manage. › (3) Adequate funds (e.g., travel allocation) exist to oversee the…
Chapter 3. Selection and Evaluation of a Designee Applicant
1. Purpose. This chapter describes the common policy related to the selection and evaluation of a designee applicant. Selection refers to the identification and evaluation of qualified designee applicants that best meet the FAA’s needs. This chapter and the corresponding designation type-specific volumes constitute the policy for the selection and evaluation of a designee applicant.
2. General.
a. Qualified Applicants. DMS will provide a list of qualified applicants that meet the needs identified by the requesting FAA office.
b. Selection Timeframe. Once DMS presents a list of qualified applicants, the selecting official should complete the selection action within 30 calendar-days.
3. Need and Ability to Manage. The FAA must show need for specific functions to be delegated and, subsequently, the ability to manage a designee performing those functions before a designee can be appointed. The managing FAA office, within its sole discretion, determines the need for and ability to manage a designee. The selecting official at the managing FAA office must validate the need and ability to manage an additional designee by answering a series of questions during the selection process in DMS.
a. Considerations for Determining Specific Need.
(1) The FAA cannot support the certification work and need with existing designees.
(2) The activity in the office has increased or is forecasted to increase and cannot be supported with existing designees.
(3) The FAA has lost an employee or designee resource.
(4) The need for a new designee is driven by the needs of the public and not by the impact on other existing designees or entities.
b. Considerations for Determining Ability to Manage.
(1) The managing office staff has the technical skills and knowledge to manage the designee.
(2) The existing and/or projected office workload allows the office to effectively manage the designee.
(3) Adequate funds (e.g., travel allocation) exist to oversee the additional or existing designee.
4. Requesting Qualified Applicants.
a. List of Qualified Applicants. Once the FAA establishes the need and ability to manage a designee, the selecting official can request a list of qualified applicants from DMS. DMS will search active applicants to identify applicants that most closely match the specified criteria.
5. Evaluation. The following tasks are part of the evaluation process: › d. Completing Evaluation Checklist. The evaluation panel lead,…
b. Deviation from Minimum Qualifications. If no qualified candidates are available within DMS, an appointing official may request a deviation from the minimum qualification requirements if:
(1) The FAA demonstrates a significant need for the appointment, and
(2) The applicant meets an equivalent qualification. (See the appropriate designee type-specific volume for more information.)
5. Evaluation. The following tasks are part of the evaluation process:
a. Evaluating Search Returns. Once DMS has generated a list of applicant(s) based on the search criteria, the selecting official may choose to review the applications prior to assigning personnel to evaluate the applicant’s qualifications. Determining which applicants will be evaluated for appointment is at the sole discretion of the selecting official.
b. Assigning Evaluation Panel Lead. Once the selecting official determines which applicants will be evaluated for appointment, DMS will prompt the selecting official to assign personnel to conduct an evaluation of the applicant based on designee type-specific policies.
c. Reviewing Application for Minimum Qualifications. For each applicant, the personnel assigned to evaluate the application will review the application for completeness to ensure that all minimum qualifications have been met.
d. Completing Evaluation Checklist. The evaluation panel lead, depending on the designee type-specific policies, completes an evaluation checklist in DMS for each applicant being evaluated. See Chapter 3 in each designee-specific volume for more information.
Chapter 4. Designee Appointment › 3. Appointment Duration.
Chapter 4. Designee Appointment
1. Purpose. This chapter describes the common policy associated with the appointment of a selected qualified applicant. This chapter and the corresponding designation type-specific volumes constitute the policy for designee appointment.
2. General.
a. Designee Number. During the application process, DMS assigns a unique nine-digit identification number known as the designee number. However, this number is not known to applicants and only visible to the designee once appointed. This designee number is used in documentation to identify the work and certifications completed by the designee when authorized by the Administrator.
b. Certificate Letter of Authority (CLOA). For each appointment, DMS generates and stores a CLOA that serves as the certificate of authority, certificate of designation, and the identification card (ID cards are issued to AMEs only) as required by part 183. The CLOA provides a detailed description of the designee’s authorities, limitations, and associated expiration as contained within DMS. A CLOA is available to the designee for each type of designation held and serves as the record of the designee’s authority. Authorized users can view a designee’s authority in DMS. A designee may print a copy of the CLOA but it is not required.
3. Appointment Duration. Appointment duration is 1 year from the appointment date. See Volume 1, Chapter 8, Annual Request for Extension of a Designee’s Designation, and the designee type-specific policy for considerations to extend the designation beyond the expiration date.
3. Ongoing Requirements. › d. Attend Required Training. Designees must comply with minimum…
Chapter 5. Responsibilities and Obligations of a Designee
1. Purpose. This chapter describes the common policy associated with the responsibilities and obligations of a designee. This chapter and the corresponding designation type-specific volumes constitute responsibilities and obligations of a designee.
2. Responsibilities. A designee must:
a. Represent the Administrator. Each designee must represent the Administrator in a manner that reflects positively on the FAA at all times.
b. Conduct Approved Activities. Each designee must conduct only those activities approved in DMS.
c. Follow Policy. Designees must follow all requirements found in regulations, orders, and other policies related to the functions they perform.
d. Maintain Skills and Knowledge. Designees must maintain technical skill and knowledge of subject matter specific to the designation held.
e. Exhibit Sound Judgment. Designees must display sound judgment at all times.
f. Exhibit Integrity. Designees must show a high degree of integrity, responsibility, and professionalism at all times.
3. Ongoing Requirements. In addition to maintaining minimum qualifications as specified in this and the designee type-specific volumes, all designees must continue to meet the following requirements:
a. Use DMS. Designees must use DMS as directed in this order. Designees have the responsibility to read and respond to DMS messages and provide requested information within DMS, as directed, in a timely manner.
b. Maintain Contact Information. Designees must update their DMS profile when changes occur and review their profile at least annually.
c. Access to Internet. Designees must have access to DMS and email through the internet.
(1) The designee is responsible for accessing DMS and checking DMS messages, notifications, and email on a regular and recurring basis.
(2) The designee is responsible for scanning and uploading documents required for designation.
d. Attend Required Training. Designees must comply with minimum training requirements.
Chapter 5. Responsibilities and Obligations of a Designee › 4. Other.
e. Attend Required Meetings. Designees must comply with meeting requirements.
4. Other. Designees must maintain other requirements deemed necessary by the appointing office.
Chapter 6. Oversight and Management of a Designee
1. Purpose. This chapter describes the common policy associated with the oversight and management of a designee. This chapter and the corresponding designation type-specific volumes constitute the policy for oversight and management of a designee.
(3) Regulatory Oversight Responsibility. › (d) Detect the need for regulatory, managerial, and operational changes.
2. General.
a. Oversight Principles.
(1) Promote Safety. A primary responsibility of the FAA is to promote safety through systematic oversight of industry stakeholders, including designees. Information generated from oversight programs permits the FAA to identify safety hazards, mitigate risk, and enhance aviation safety. In order for oversight programs to be effective, they must be carefully planned and executed during the conduct of specific inspection activities.
(2) Evaluate Performance. The objective of an oversight program is to ensure that the designee performs to the standards and expectations set forth by the FAA in its policies and regulations. Oversight is not merely an isolated event or series of activities. Oversight results should be considered in total to provide a high-level perspective of a designee’s performance over time.
b. Managing Office and Managing Specialist.
(1) Designation Type. Designees have a managing office and managing specialist for each designation type. If the designee holds more than one type of designation, a designee may have more than one managing office and more than one managing specialist.
(2) Area of Responsibility. The FAA expects designees to perform the majority of their functions within the bounds of that managing office’s area of responsibility unless otherwise noted in the designee specific-type volume.
(3) Regulatory Oversight Responsibility. Managing specialists have regulatory oversight responsibility of designees and must monitor them to ensure that they continue to meet the requirements of their designations. A comprehensive oversight plan enables managing specialists to:
(a) Determine the designee’s compliance with regulatory requirements, guidance, policy, and safe operating practices;
(b) Validate the corrective actions;
(c) Detect changes as they occur in the operational environment; and
(d) Detect the need for regulatory, managerial, and operational changes.
d. Performance Measures. For many of the oversight activities, the… › (1) Technical.
c. Oversight and DMS. The FAA uses DMS to record the outcomes of oversight activities for a designee which may vary depending on the designee type. By documenting oversight activity in DMS, the FAA can make an overall assessment of the designee’s performance.
(1) Oversight Characteristics. In DMS, oversight activities have the following characteristics:
(a) A definite beginning and a definite end;
(b) Defined procedures;
(c) Specific objectives; and
(d) A required report of findings.
(2) DMS Oversight Activities. The following oversight activities are available in DMS for most designee types:
(a) Direct observation;
(b) Document completed work review;
(c) Document results of investigation or inquiry;
(d) Document designee interaction;
(e) Document designee training;
(f) Document applicant interview results; and
(g) Create overall performance evaluation (OPE).
(3) DMS Management Tools. The following management tools are available in DMS dependent on the designee type:
(a) Create planned activity;
(b) Record feedback;
(c) Send note to designee; and
(d) Document annual meeting.
d. Performance Measures. For many of the oversight activities, the managing specialist should use the following performance measures to determine designee performance:
(1) Technical. The designee demonstrates sufficient knowledge, skill, and ability to conduct authorized tasks within established guidance and standards. The designee possesses an
c. Outcomes of Oversight Activities. › (2) Additionally, if the designee’s oversight outcome results in “Needs…
expert level of knowledge and skill, understands and uses appropriate terminology, uses the correct equipment, applies appropriate standards, and accurately interprets results.
(2) Procedural. The designee demonstrates the ability to complete administrative functions correctly. The designee accurately completes and issues appropriate documentation, submits required data, follows established procedures, and complies with all regulations, orders, and directives.
(3) Professional. The designee conducts activities in an ethical, courteous, and conscientious manner reflecting highly on the Administrator. The designee presents a cooperative attitude and demonstrates integrity, tact, and diplomacy when dealing with industry and the FAA. The designee communicates effectively in a manner that reflects positively on the FAA, both orally and written.
3. Oversight Actions. Managing specialists may use DMS to plan but must use DMS to document the outcome of oversight activities.
a. Planning an Oversight Activity. DMS allows managing specialists to schedule an oversight activity.
(1) Managing specialists should use risk management principles when planning oversight.
(2) Managing specialists should review the designee’s previous oversight outcomes as well as current activities, records, and policy as part of the planning.
b. Oversight Activity. For a list and explanation of oversight activities applicable to a specific designee type, see Chapter 6, Oversight and Management of a Designee, in the respective designee type-specific volume.
c. Outcomes of Oversight Activities.
(1) For some oversight activities, the managing specialist must select from three general categories in DMS for the overall ranking of the oversight activity: Satisfactory, Needs Improvement, and Unsatisfactory. If the designee’s oversight outcome results in “Needs Improvement” or “Unsatisfactory,” the managing specialist must enter descriptive text in the appropriate performance measure category(ies).
(2) Additionally, if the designee’s oversight outcome results in “Needs Improvement” or “Unsatisfactory,” the managing specialist must also determine and record appropriate followup action(s). For more detail on followup actions, see Table 1-2, Overall Performance Result, and Paragraph 4, Followup Actions, in this chapter, as well as the performance evaluation information in Chapter 6 of each designee type-specific volume.
d. Performance Evaluation. › (4) If the OPE rating requires a 6-month followup, the next performance…
d. Performance Evaluation.
(1) At the end of the performance period, the managing specialist conducts a consolidated review of the designee’s documented oversight activity and other data available and recorded in DMS.
(2) Based on an analysis of the information above and considering risk-based elements, the managing specialist selects an overall performance rating (Satisfactory, Unsatisfactory, or Needs Improvement) and any followup actions, if required. See Table 1-2 below.
(3) If the performance evaluation rating is “Needs Improvement” or “Unsatisfactory,” the next performance evaluation must be completed within 6 calendar-months from the previous performance evaluation date. If the performance evaluation result is “Satisfactory,” the due date for the next performance evaluation is between 12 and 36 calendar-months. See Chapter 6 in the respective designee type-specific volumes for more information.
(4) If the OPE rating requires a 6-month followup, the next performance evaluation of the designee must be a “Satisfactory” rating or the designee will be terminated.
Table 1-2. Overall Performance Result
Overall Performance Result
The managing specialist will choose the overall rating that best represents the overall performance result of the designee during the performance period:
Overall Rating
Required Action Against Designee
Authority
Followup Actions Performance Evaluation Required w/in 6 Months?*
Satisfactory None None No
Needs Improvement
See designee type-specific volume, as applicable
Plan and execute an oversight activity
Yes
Unsatisfactory
Suspend* Plan and execute a corrective action activity
Yes
Reduce/Restrict Authority Change authority, plan
and execute oversight activity
Yes
Terminate Terminate N/A
* Requires description of planned followup activity.
a. Request for Additional Authorizations or Limitations. › (4) The appointing official must approve all requests for additional…
4. Followup Actions. Depending on the issues involved, additional followup or oversight may be needed to ensure that the deficiency has been corrected. The intent of the followup action is to correct the deficiency using the most appropriate method. The following options are available to provide support for designee management:
Note: If suspension or termination is required, please see the designee type-specific “Suspension of a Designation” and “Termination of a Designation” chapters for more information. For “Reduce Authority” decisions, see subparagraph 5b below.
a. Counseling. Managing specialists may use counseling as a type of corrective action to follow up from a specific event, an oversight activity, or to address specific performance issues. The managing specialist must record the results of the counseling session in DMS.
b. Additional Training.
(1) Managing specialists may prescribe additional training to correct a deficiency related to a specific event, an oversight activity, or to address specific performance issues.
(2) If the deficiency is such that the designee is unable to perform authorized functions correctly, the managing specialist may initiate the suspension process to suspend the designation or specific authority until the designee completes the training.
5. Designee Management Functions. Since the designee is performing duties on behalf of the FAA, the managing specialist should ensure that the designee has the ability and authority to perform authorized functions. If the managing specialist or the designee determines that the authorized functions are inconsistent with the work the designee will perform, DMS provides the ability to expand or reduce authorities and change limitations.
a. Request for Additional Authorizations or Limitations.
(1) Authorities can be expanded and limitations changed on an existing designation only.
(2) When designees believe that they are qualified to perform additional authorized tasks within their designee type, other than those that the FAA currently authorizes, they may request the change through DMS.
Note: In some cases, the managing specialist may also initiate this process in DMS.
(3) The selecting official will review the request and determine if the added authority is needed and, if so, make a recommendation to the appointing official.
(4) The appointing official must approve all requests for additional authorizations or limitations in DMS. In order for the appointing official to approve the request, the designee must meet all requirements, and the FAA must have the need and ability to manage the designee. In some cases, an evaluation panel will be convened to review the designee’s qualifications for the additional authorizations. Refer to the designee-specific volume for specific instructions.
e. Record Feedback or an Interaction Regarding a Designee. › (2) Feedback should be provided promptly following the activity to…
(5) If approved, DMS will automatically update the authority and CLOA as appropriate, notifying both the designee and the managing specialist. A designee shall not exercise any expanded authority until the request has been approved and official notification has been made.
b. Reduce Authority. A managing specialist may initiate a reduction in a designee’s authority for a specific designation through DMS, or a designee can request a reduction of authority through the managing specialist.
(1) DMS requires the managing specialist to enter a justification for reducing a designee’s authority.
(2) In order for the request to be approved, the FAA must consider whether the need and ability to manage the designation still exists given the reduction in authority. If there is no longer a need or ability to manage the designee with reduced authority, the managing specialist will initiate the termination (not for cause) process.
(3) An appointing official must approve all requests to reduce authority in DMS. If approved, DMS will automatically update the designee’s authorities and CLOA, as appropriate.
c. Record Note. Managing specialists can create a personal note or reminder in DMS. This note is the digital equivalent of a sticky note; it is not part of the designee’s official record, and only the author can view the note. Managing specialists should not use this feature to record performance-related issues or other oversight-related information.
d. Send Message to Designee.
(1) Managing specialists can use DMS to send a message to one or more of their assigned designees.
(2) DMS will store the message and record the date the message is sent, along with the date the message is opened by the designee.
(3) DMS users can view these messages. Designees are required to monitor DMS for new messages.
e. Record Feedback or an Interaction Regarding a Designee.
(1) Interaction can be verbal and/or written communication between the designee, FAA, and industry.
(2) Feedback should be provided promptly following the activity to which it references. While the managing specialist has management responsibility for the designee, any FAA employee working with a designee or designee’s work product has the responsibility to provide feedback regarding the designee’s performance or activity. Any FAA employee with access to DMS can enter feedback on a designee. If the user providing the feedback is not the managing specialist, DMS will send a notification to the managing specialist.
(3) Types of feedback or interactions that should be recorded in DMS… › (d) Compliments, critiques, and suggestions.
(3) Types of feedback or interactions that should be recorded in DMS include, but are not limited to, the following:
(a) Corrective—intended to correct an error;
(b) Evaluative—intended to detail specific positive feedback;
(c) Instructional—intended to provide information about the quality of performance; and
(d) Compliments, critiques, and suggestions.
Chapter 7. Training › 5. Other FAA Employee Training Requirements.
Chapter 7. Training
1. Purpose. This chapter describes the common policy associated with training of designee applicants, designees, and FAA personnel. This chapter and the corresponding designation type-specific volumes constitute the policy for training.
2. General. Designees and FAA personnel must develop and maintain the technical skills, knowledge, ability, and proficiency to effectively perform their duties and roles.
3. Designee Training Requirements.
a. Initial Training. Prior to the FAA appointing an individual as a designee, the individual must participate in and successfully complete the initial training program.
b. Recurrent Training. A designee must regularly attend and successfully complete recurrent training.
c. Specialized Training. Specialized training covers specific authority not held by the majority of designees of a particular type, or covers new concepts, processes, and delegation authority. These topics are not normally covered in the initial or recurrent training for those designee types and are therefore addressed outside of this normal training environment. Specialized training is typically web-based and addresses those areas where specialized experience and authority is required. Where applicable, a designee must complete any specialized training that is required for the specific authority requested or held. This specialized training must be completed prior to appointment or adding the special authority and in some cases must be repeated at the interval specified.
4. FAA Managing Specialist Training Requirements. Managing specialists should complete relevant initial training prior to being assigned as a managing specialist. If an individual cannot complete the relevant initial training prior to being assigned as a managing specialist, they should enroll in a training course that takes place within 6 calendar-months of assignment and another managing specialist (either in the managing office or another office) should be identified by the managing office.
5. Other FAA Employee Training Requirements. Managers of DMS users who have assigned DMS roles should complete AVS training associated with designee management within 6 calendar-months of being assigned that role.
Chapter 8. Annual Request for Extension of a Designee’s Designation › 4. New Expiration Date.
Chapter 8. Annual Request for Extension of a Designee’s Designation
1. Purpose. This chapter describes the common policy associated with the FAA’s extension of a designee’s designation from the current expiration date. This chapter and the corresponding designation type-specific volumes constitute the policy for extending the expiration date on an existing designee in good standing.
2. General. Extension of the designee’s designation is the responsibility of the designee. Since designee oversight requirements have defined intervals, extension of their designation is not contingent upon a particular oversight activity. As long as a designee is in good standing and continues to meet the qualification requirements for their designation, the designee will be given a 1-year extension on their designation once they complete the annual request to extend expiration date.
3. Annual Request to Extend Expiration Date.
a. Timeframe. Designees are required to request an extension of their expiration date annually. They will receive an action to complete this task 60 calendar-days prior to the due date. The workflow asks the designee a series of questions and, upon completion, the designee submits the request.
b. Additional Information. When a specific location is not required, the designee will update the designation location that will be published in the designee locator. The designee will also update any information required to maintain the specific designation and answer the common questions required to maintain basic designee eligibility. Extending a designee’s designation is predicated on the active designee:
• Remaining in good standing; • Having no violation history; • Being current on all required training; • Having no arrests or convictions; and • Having not had an airman certificate (other than medical), rating, or authorization (or foreign equivalent) suspended or revoked; or having not had to pay a civil penalty as a result of a violation of any FAA or other CAA regulations (foreign or domestic).
4. New Expiration Date. Once the annual request to extend expiration date has been successfully submitted, DMS will set a new expiration date on the CLOA, extending a designee’s designation for 1 year from the date the action is completed. All new expiration dates will be set for the last day of the month even if it exceeds 1 year.
Note: During the request to extend expiration date, designees in a suspended status may qualify for the 12 calendar-month extension of the expiration date, but they must be in an active status by the time the profile update is submitted. This along with policy in the designee specific volumes constitute the requirements for the annual request for extension of a designee’s designation requirements.
Chapter 8. Annual Request for Extension of a Designee’s Designation › 11. Disqualifiers.
5. Termination—Nonsubmittal. If the designee does not submit the required profile update action in DMS before the designation expires, DMS changes the designee’s status to “expired.” In an expired status, the designee is no longer authorized to perform any duties related to the expired designation and will have limited access to DMS. The designee can be removed from the expired status by updating their profile information. If a designee does not perform the required update, the FAA will initiate the termination process. See Chapter 9 for additional information. Designees terminated for nonsubmittal of a profile update are considered terminated “not for cause” and may reapply at any time or be reinstated where designee specific policy allows.
6. Reminders. The designee is responsible for accessing DMS and checking DMS message center notifications and action required items on a regular and recurring basis. The designee has the sole responsibility to update their profile when they receive the action on their DMS homepage and the email notification.
7. Duration. Successful submission of the Update Profile action extends the designee’s expiration date for one additional year with a date of the last day of the month.
8. Surrender. A designee who does not intend to extend a designation is encouraged to voluntarily surrender the designation in DMS prior to expiration.
9. Expansion of Authority. The designee may not seek an expansion of authority using the profile update process. (See Chapter 6, Subparagraph 5a, Request for Additional Authorizations and Limitations.)
10. Privilege, Not a Right. Successfully meeting the minimum qualifications does not guarantee an extension as a designee. During the annual update, a designee applicant must also acknowledge in DMS that a designation is a privilege, not a right. Negative behavior exhibited at any time (during or outside delegated activities) could affect their designation. During the annual update, the designee must also acknowledge in DMS that the FAA Administrator can terminate any designation at any time, for any reason.
11. Disqualifiers. See the list in Volume 1, Chapter 2, Application Process.
Chapter 9. Termination of a Designation
1. Purpose. This chapter describes the common policy associated with the termination of a designation. This chapter and the corresponding designation type-specific volumes constitute the policy for termination of a designation.
c. Possible Reasons for Voluntary Surrender of a Designation. › (3) Difficulty in meeting requirements;
2. General. There are two methods used to terminate a designation: voluntary surrender and FAA-initiated termination.
3. Voluntary Surrender.
a. Voluntarily Surrendering a Designation. A designee may voluntarily surrender a designation.
(1) Designees must surrender each designation separately. The voluntary surrender process applies only to a single designation at a time.
(2) A voluntary surrender of a designation does not preclude the individual from applying to be a designee in the future.
(3) Once DMS notifies the designee of the suspension based on a pending termination for cause action, the designee may not submit a voluntary surrender request in DMS.
b. Voluntary Surrender Process.
(1) To begin the voluntary surrender process, a designee must submit a voluntary surrender request in DMS.
(2) For a company designee, a company representative may contact the designee’s managing specialist to request voluntary surrender in DMS.
(3) The managing specialist must document the voluntary surrender in DMS and include the specific reason(s) provided by the designee.
(4) If the designee is voluntarily surrendering a designation, the managing specialist will indicate whether or not the designee is considered “in good standing.” This determination is helpful should the designee choose to reapply at a later date.
(5) DMS will turn off access to DMS functionality as appropriate for the designation being terminated. The designee is no longer authorized to perform any duties related to the designation.
c. Possible Reasons for Voluntary Surrender of a Designation.
(1) Retirement;
(2) Lack of business activity;
(3) Difficulty in meeting requirements;
4. FAA-Initiated Termination. › c. Types of Termination. There are two types of termination: “for…
(4) Dissatisfied with being a designee;
(5) Personal reasons;
(6) Employment termination; or
(7) Any other reason.
4. FAA-Initiated Termination. Designees are selected, appointed, and trained to serve the needs of the FAA in fulfilling its safety mission, allowing the FAA to leverage its resources. Therefore, the FAA can rescind a designation at any time for any reason considered appropriate by the Administrator. Designees who are performing poorly, who are representing the Administrator in a negative manner, or who require excessive resources to manage must have their designations terminated to ensure continued effectiveness of the designee system.
a. Terminating a Designation.
(1) The FAA must document termination decisions in DMS and include the specific reason(s) for the termination.
(2) When applicable, the FAA should consider feedback from individuals involved in reviewing work performed outside the designee’s managing office.
(3) Only managing specialists assigned to the designee can initiate the termination process in DMS.
b. Termination Process.
(1) When it has been determined that termination is warranted, the managing specialist should begin the process immediately. Termination decisions must be formally documented in DMS, to include the specific reason. The appointing official must approve or deny the termination recommendation through DMS.
(2) Once the termination process has begun, DMS will prevent the designee from conducting new work under the designation being terminated. The status of the designee’s authority will change to “suspended” during the termination process. The designee must immediately cease exercising designee privileges for the designation being terminated.
(3) Upon completion of the termination process, the designee’s status will be changed to “terminated.” DMS will generate and send an electronic termination notice to the designee.
(4) Depending on the reasons for termination, the designee may request an appeal. (See Chapter 11 for more information.)
c. Types of Termination. There are two types of termination: “for cause” and “not for cause.” Anyone terminated for cause cannot reapply for designation.
(b) FAA is Unable to Manage. › 2. The FAA does not have the ability to provide authorization, testing,…
(1) For Cause. Examples of “for cause” reasons include:
(a) Performance deficiencies found during oversight activities or identified by other sources;
(b) Lack of integrity (e.g., making false statements, misrepresenting information, failing to disclose pertinent information, exhibiting behavior that reflects poorly on the Administrator, etc.);
(c) Misconduct (e.g., purposefully not following prescribed procedures for gain, behavior that reflects poorly on the Administrator, etc.);
(d) Inability to work constructively with the FAA or public (e.g., failure to return phone calls, follow guidance, exhibit a cooperative attitude, etc.);
(e) Improper representation of the FAA (e.g., using designee number for inappropriate purposes, etc.); and
(f) Other. Any other reason that the FAA Administrator considers appropriate.
Note: DMS sends termination notifications to all managing specialists assigned responsibilities for a given designee. Managing specialists must review the “for cause” termination notices and consider termination of other designations held by the same designee (if applicable).
(2) Not for Cause. Examples of “not for cause” reasons include any reason other than “for cause.” A designee terminated not for cause may reapply for designation. Reasons for termination other than “for cause” include:
(a) Lack of FAA Need.
1. Activity in the office decreased, or is forecasted to decrease, eliminating the need for the designee.
2. The FAA plan for delegated work changed, eliminating the need for the designee.
3. The FAA can support the certification work or need with other existing designees.
(b) FAA is Unable to Manage.
1. The existing and projected office workload does not allow the office to effectively manage the designee.
2. The FAA does not have the ability to provide authorization, testing, and/or additional training needed for its employees to oversee the designee. Adequate funds (for example, travel allocation) are not available to oversee the designee.
3. FAA staff does not have the technical skills and knowledge to oversee the designee.
(c) Other. › 7. Designee did not update DMS profile at least annually.
(c) Other.
1. Designee no longer meets minimum qualifications;
2. Designee does not meet training requirements;
3. Designee is deceased;
4. Designee is physically unable to perform designee duties;
5. Designee did not renew designation before expiration;
6. Designee’s authority expired while suspended; or
7. Designee did not update DMS profile at least annually.
3. FAA-Initiated Suspension. › b. Failure to Attend a Required Meeting. The designee fails to attend a…
Chapter 10. Suspension of a Designation
1. Purpose. This chapter describes the common policy associated with the suspension of a designation. This chapter and the corresponding designation type-specific volumes constitute the policy for suspension of a designation.
2. General. Suspension is a management process that allows the FAA to temporarily remove a designee’s privileges without terminating the delegation. If an individual holds multiple designations, suspension of one designation may or may not impact other designations held. The impact of the suspension on other designations, if held, is determined by the respective managing specialist.
a. DMS Actions. During the suspension process, DMS will change the designee’s status to “suspended.” In suspended status, DMS:
(1) Notifies the designee of suspension and denies access to initiate new work for the designation being suspended;
(2) Cancels all previously approved activities, as applicable; and
(3) Allows the designee to submit post-activity entries for up to 7 calendar-days after the date of suspension.
b. Designee Action While Suspended. The designee must immediately stop exercising authorized duties for the designation being suspended.
c. Suspension Release. If suspended designees think that they have met all of the requirements to be reinstated, they may submit a suspension release request in DMS.
d. Length of Suspension. Designees will remain in a suspended status until they have corrected the deficiency or until the designation expires. If the deficiency has not been corrected within 180 calendar-days, DMS will notify the managing specialist to remove the suspension and initiate termination.
3. FAA-Initiated Suspension. The FAA may suspend a designation for the following reasons:
a. Lapse in Minimum Qualifications. The designee no longer meets the minimum qualifications.
(1) Deadline Passes for Required Training. The designee fails to successfully complete required training within the specified timeframe.
(2) Failed Test for Required Training. The designee fails a test that is part of required training, regardless of the due date of that training.
b. Failure to Attend a Required Meeting. The designee fails to attend a required meeting.
c. Poor Performance. The designee demonstrates an unsatisfactory level of performance for the designation.
d. Under Investigation. The FAA investigates allegations or findings that the designee has been acting contrary to regulations or policy. This may include investigations not related to designee activity.
4. Followup Actions. › d. Poor Performance. The designee should propose a plan of action that…
e. Failure to Maintain Currency With Training Requirements. If a designee fails to maintain their currency with training requirements, they should be moved to suspended status until they complete their training.
f. Other. Any other reason that the FAA Administrator considers appropriate.
4. Followup Actions. The FAA may require the designee to complete followup actions to remove the suspension. FAA followup actions may include additional training, counseling, and requalification. The managing specialist should follow up with the designee to ensure that any requirements are completed. Based on the results of the followup actions, the managing specialist will remove the suspension or initiate termination. The managing specialist should consider the following scenarios as possible followup actions for different suspension reasons:
a. Lapse of Minimum Qualification. The designee should propose a corrective action plan and timeline to meet the minimum qualifications that is acceptable to the managing specialist.
b. Deadline Passes for Required Training. The designee must provide the managing specialist with a plan of action for attending training to meet requirements. If training lapses are a recurring event and without good cause, such as medical inability to attend, the managing specialist may consider termination of the designee.
c. Failed Test for Required Training. Each failed test is reviewed for accuracy and fairness. Validated test failures will result in the managing office making a determination to either terminate the designation for failure to meet training requirements or require the designee to retake the training. The designee will remain in suspension until the training is completed. In the case of a non-valid test (e.g., power failure or accidental submission before completion), the designee will be allowed to retake the test.
d. Poor Performance. The designee should propose a plan of action that is acceptable to the managing specialist as well as a corrective action plan to improve poor performance.
Chapter 11. Appealing a Termination for Cause › 4. Appeal Panel Responsibilities.
Chapter 11. Appealing a Termination for Cause
1. Purpose. This chapter describes the common policy by which a designee may appeal a termination for cause decision. This chapter and the corresponding designation type-specific volumes constitute the policy for appealing a termination for cause.
2. General. The FAA only allows appeals if the FAA terminated the designee for cause. All appeal activities are processed and recorded in DMS.
a. Appeal Initiation. To appeal a for-cause termination, the designee must initiate an appeal in DMS within 15 calendar-days of for-cause termination. As part of the appeal request, designees should provide any evidence to support their case at the time the appeal is initiated.
b. Scope of Appeal. The appeal is intended to be a review of the termination for cause process (see Chapter 9, Termination of a Designation).
c. Appeal Panel Outcomes. The appeal panel may choose one of the following results:
(1) Uphold the original termination decision whereby the original decision stands and no further appeals are accepted.
(2) Overturn the termination decision whereby the FAA reinstates the designee.
d. Timeframe for the Appeal Process. The appeal panel must complete the appeal process within 45 calendar-days of receiving the appeal request.
e. Notification of Decision. DMS will notify the designee of the appeal panel’s decision within 15 calendar-days of a decision.
3. Official Responsibilities of the Appointing or Selecting Official During Appeal. Once the designee has submitted an appeal in DMS, DMS will automatically notify the appropriate appointing or selecting official who is required to complete the following:
a. Review Appeal Information in DMS. Review the designee’s appeal information and make comments, if desired.
b. Establish Appeal Panel. The appeal panel must consist of two or three individuals. The panel comprises any combination of FAA managing specialists, selecting officials, or appointing officials who were not involved in the original decision.
c. Appoint a Point of Contact (POC). Appoint a POC for the panel from someone on the panel.
d. Communicate Responsibilities. Contact panel members and discuss appeal panel responsibilities, as needed.
4. Appeal Panel Responsibilities. The POC for the appeal panel will ensure that the panel completes the following tasks:
a. Review File. Review the appealing designee file stored in DMS.
4. Appeal Panel Responsibilities. › c. Document Outcomes. Document deliberations and outcomes in DMS.
b. Request Additional Information. Contact the managing specialist, evaluation panel lead, appointing official, and/or selecting official for additional information or clarification.
c. Document Outcomes. Document deliberations and outcomes in DMS.
Chapter 12. Other Designee Management Functions
4. Impact of Updates to Information. › a. Change of Designation Location. A change of designation location may…
1. Purpose. This chapter describes the common policy associated with other designee management functions in DMS. This chapter and the corresponding designation type-specific volumes constitute the policy for other designee management functions in DMS.
2. Assign DMS Roles.
a. General. The primary purpose of this process is to authorize a qualified FAA employee to have appropriate access to functionality within DMS.
(1) DMS roles allow users the ability to access DMS and perform functions within each process, including apply, select, appoint, etc., as described in this order. DMS roles control specific user access within DMS. The FAA may assign users more than one role within DMS.
(2) DMS roles are assigned based on the office needs and in accordance with the designation type-specific volumes of this order.
(3) The term “DMS role” does not convey an official position or title.
b. Master Role Assigner (MRA). The MRA makes the initial assignment or assigns an existing internal user to a role in DMS.
(1) “Designee” is a role but is not assigned via the MRA process. DMS automatically assigns the designee role during appointment.
(2) The MRA function may be given at different levels within each service or office. It is the responsibility of the MRA to add roles for their office or remove roles for individuals who have moved offices, retired, or no longer need a role in DMS. Instructions for the MRA role can be found in the DMS help menu.
3. Send Message to Managing Specialist. DMS provides a method to send messages between the managing specialist and the designee through the message center.
4. Impact of Updates to Information. Depending on the designation type, updates to certain information in the designee record, such as change in designation location or qualifications, may affect the designation.
a. Change of Designation Location. A change of designation location may cause the FAA to review need and ability to manage considerations. DMS will notify the current managing specialist if there has been a change of physical address, and the managing specialist will determine if the new address will initiate a change in the managing office. A change in designation location may require the FAA to initiate a designee transfer to the new location.
Note: The FAA is under no obligation to transfer the designee to a new overseeing office.
5. Retention of Existing Designee Management Files. › c. Uploading Capabilities. DMS has uploading capabilities to maintain…
b. Change of Name. The managing specialist should verify a name change through reviewing government-issued forms of identification. A name change constitutes a legal change to a designee’s authorization and must be verified.
c. Additional Information. Additional information can be found in the appropriate type-specific volumes for guidance on the types of changes and their impact.
5. Retention of Existing Designee Management Files.
a. Maintain Existing Designee Records. The FAA must continue to maintain existing designee records located in the managing office in accordance with FAA Order 1350.14. Once the designee becomes an active DMS user, all future documentation will be maintained electronically in DMS.
b. Access to Electronic Files by Newly Appointed Designees. DMS will store the records electronically for newly appointed designees.
c. Uploading Capabilities. DMS has uploading capabilities to maintain supporting documents. This function should be used for any documentation that supports designee management of the activities which occur in DMS. This function should not be used to upload existing designee file information that existed prior to the designee becoming an active DMS user.
Chapter 13. Administrative Information › 3. Directive Feedback Information.
Chapter 13. Administrative Information
1. Distribution. This order will be distributed to:
a. The division level in Flight Standards; all Flight Standards District Offices (FSDO), Certificate Management Offices (CMO), and International Field Offices (IFO); and all Air Carrier (AC) and General Aviation (GA) airman designees.
b. The Washington headquarters (HQ) branch levels of AIR; all responsible Aircraft Certification Service offices; Compliance and Airworthiness Division (AIR-700); System Oversight Division (AIR-800), Aircraft Certification Offices (ACO); MIO Branches and MIDO Section offices; and Operations and Airworthiness branches at the FAA Academy.
c. The division level within AAM, including the Civil Aerospace Medical Institute (CAMI), Regional Flight Surgeons (RFS), and AMEs.
d. The division level within AOV.
e. The Office of the Chief Counsel (AGC).
2. Deviations. It is necessary to adhere to procedures in this order to achieve uniform administration of this directive material. If a selecting official thinks that a deviation is necessary, request the deviation in writing from the policy-owning office as outlined in Table 1-1, Offices Responsible for Designee Policy. You must follow the procedures in this order to ensure uniform administration of this directive. To deviate from this policy, you must coordinate with—and get approval from—the Policy and Innovation Division (AIR-600), Aerospace Medical Education Division (AAM-400), Regulatory Support Division (AFS-600), or System Oversight Division (AOV-200), as applicable. If deviation is necessary, be sure to substantiate and document the deviations and get approval from your supervisor and AIR-600, AAM-400, AFS-600, or AOV-200, as applicable. When a deviation is to Chapter 1 of this order, it will be signed by all three divisions before being approved. All deviations to chapters that cover specific designee types must be coordinated with the other services before being approved.
3. Directive Feedback Information. For your convenience, use FAA Form 1320-19, Directive Feedback Information (which is found on the last page of this order), to submit suggestions or comments. Please use the “Other Comments” block on FAA Form 1320-19 to provide a complete explanation of why the suggested change is necessary. You may correct, as necessary, a copy of the pertinent information, or provide a handwritten note for consideration.
Chapter 1. Introduction › 2. Audience.
VOLUME 2. AME DESIGNEE POLICY
Chapter 1. Introduction
1. Purpose of This Volume. This volume supplements the common designee policy by providing specific guidance for the administration of the Aviation Medical Examiner (AME) designee management program not otherwise given in detail in the common designee policy.
2. Audience. The primary audience of this volume is the Manager/Appointing Official (MGR/AO) of the Aerospace Medical Education Division (AMED), Regional Flight Surgeons/Appointing Officials (RFS/AO), AME Program Analysts/Managing Specialists (AME PA/MS), AME Surveillance Program Analysts (SPA), and AMEs.
a. Minimum Qualifications. Applicants for designation as an AME must: › (3) Must be in good standing and possess a Doctor of Medicine (M.D.) or…
Chapter 2. Application Process
1. Purpose. This chapter provides the policy related to the application of AME designees. This designation type-specific policy and Volume 1, Common Designee Policy, constitute the overall policy for an individual applying for designation authority.
2. General.
a. Application Information.
(1) Candidates for initial designation as an AME must submit an application through the Designee Management System (DMS).
(2) Contact information for RFSs is located on the Federal Aviation Administration (FAA) website at https://www.faa.gov/licenses_certificates/medical_certification/rfs/.
(3) The FAA advises all AME applicants to read the selection information in this chapter to ensure that they meet all of the selection criteria before applying for designation as an AME.
b. Multiple Site Authorizations. The RFS/AO or MGR/AO, AMED may approve, upon request, two authorized work locations within reasonable proximity of one another and within the same region, as appropriate. If a third designation location is desired, it must be approved by the senior RFS.
c. Special Considerations.
(1) The RFS may give special consideration for designation to those applicants who are pilots, have been military flight surgeons, have special training expertise in aviation medicine, or were previously designated, but have relocated to a new geographic area.
(2) No special consideration will be given to those former FAA employees seeking designation as an AME outside the FAA, other than what has been stated in the previous paragraph.
3. Minimum Qualifications.
a. Minimum Qualifications. Applicants for designation as an AME must:
(1) Possess an unrestricted license, or an equivalent clearance for international applicants, to fully practice medicine in the state, foreign country, or area in which the designation is sought; or meet the medical licensing requirements of the applicable military or Federal service to which they belong.
(2) Demonstrate past professional performance and personal conduct suitable for a position of responsibility and trust.
(3) Must be in good standing and possess a Doctor of Medicine (M.D.) or Doctor of Osteopathic Medicine (D.O.) degree from an accredited university.
(4) Be able to read, write, speak, and understand the English language.
(5) Be knowledgeable of the principles of aerospace medicine.
4. Disqualifiers. › a. False Statements. In connection with completion of FAA Form 8500-8,…
(6) Be thoroughly familiar with instructions as to techniques of examination, medical assessment, and certification of airmen.
(7) Abide by the policies, rules, and regulations of the FAA.
b. Methods for Seeking Designees. The FAA expects that all Office of Aerospace Medicine (AAM) physicians will proactively seek qualified AME applicants using all available forums to advertise needs, requirements, and the application process, including:
(1) Aerospace Medical Association or other aerospace medicine meetings;
(2) Briefings to military flight surgeons and aerospace medicine residency groups; and
(3) The FAA AAM website: https://www.faa.gov/about/office_org/headquarters_offices/ avs/offices/aam/.
c. Credentials. At the time of initial application for designation, the physician shall submit to DMS the following documents or copies (translated into English if in another language):
(1) Medical school diploma.
(2) Certificate of any postgraduate professional training (e.g., internship, residency, fellowship).
(3) Certificate of Good Standing by all medical licensing bodies from which the applicant has active medical licenses, proving there are no restrictions or limitations to practice medicine.
(a) These may be obtained by the region in written form or electronically, or the regional office may request the applicant instruct the licensing body to send certifications to the regional office.
(b) Under no circumstances should a Certificate in Good Standing be accepted directly from the applicant.
(4) Notice of certification by an American specialty board, if applicable.
(5) A current curriculum vitae.
4. Disqualifiers. The FAA will disqualify an AME applicant for certain personal or professional deficiencies and intentional misrepresentations, including:
a. False Statements. In connection with completion of FAA Form 8500-8, AMEs are subject to Title 18 of the United States Code (18 U.S.C.) §§ 1001 and 3571, which indicate that whoever in any matter within the jurisdiction of any department or agency of the United States knowingly and willfully falsifies, conceals, or covers up by any trick, scheme, or device a
Chapter 2. Application Process › 7. Maintaining an Active Designee Application.
material fact, or who makes any false, fictitious, or fraudulent statements or representations, or entry, may be fined up to $250,000 or imprisoned not more than 5 years, or both.
b. Medical License History. Any past or present adverse action against the medical license of the AME is subject to review by the RFS for suitability or selection.
5. Privilege, Not a Right. See Volume 1.
6. Post-Application. See Volume 1.
7. Maintaining an Active Designee Application. All AMEs or prospective AMEs must immediately update their record in DMS when there is a change in status of licensure to practice medicine or adverse action or warning issued by a state licensing authority.
5. Evaluation. › b. Evaluation Panel. The evaluation panel consists of an RFS/AO or…
Chapter 3. Selection and Evaluation of a Designee Applicant
1. Purpose. This chapter provides the policy related to the selection and evaluation of an AME designee applicant. This designation type-specific policy and Volume 1 constitute the overall policy for the selection and evaluation of an AME applicant.
2. General.
a. Selection Process. The general process of selection consists of three steps: DMS determines if system-defined minimum qualifications are met; the selecting official (SO) determines if need and ability requirements are met; and an MS is then assigned to further review the applicant’s qualifications and abilities.
b. Selection Considerations.
(1) DMS is the sole source from which to obtain a list of qualified applicants.
(2) An evaluation panel, determined by the SO, will then be established to review and evaluate the list of viable applicants identified through DMS.
3. Need and Ability to Manage. The RFS/AO or MGR/AO, AMED, shall determine whether a need exists for an AME in a particular geographic area based on adequacy of coverage related to the pilot population or other factors. The RFS/AO or MGR/AO, AMED, will consider other variables, such as rural versus urban geographic locations and aviation activity levels, when assessing the local needs for designation of additional AMEs.
4. Requesting Qualified Applicant. See Volume 1.
5. Evaluation.
a. Evaluation Process. Once DMS provides a list of applicant(s) based on the search criteria, each applicant for consideration must be further evaluated.
(1) The MS must review the application for completeness and ensure that minimum qualifications are met for each applicant.
(2) The MS must complete the evaluation checklist in DMS for each applicant being evaluated.
(3) The MS must determine what training a prospective AME will require prior to appointment, which is a key part of the selection process. The regional office will follow the guidance in the training section to determine the initial training requirement and notify the applicant of these requirements.
b. Evaluation Panel. The evaluation panel consists of an RFS/AO or MGR/AO, AMED, and an AME PA/MS.
f. Selection Notification. DMS will: › (3) Maintain the data for the Certificate Letter of Authority (CLOA).
c. Evaluation Criteria.
(1) The regional office must conduct a review of the applicant’s qualifications and supporting documentation.
(2) The AME PA/MS may contact the applicant for more information regarding the application, if needed.
(3) The FAA will not consider for designation an applicant that has been previously terminated for cause.
d. Record Results. The AME PA/MS must record results of the evaluation in DMS.
e. Make Recommendation. The AME PA/MS submits the findings and recommendations in accordance with this order.
(1) The AME PA/MS will make one of the following recommendations:
(a) Recommend appointment.
(b) Do not recommend appointment.
(2) DMS provides the recommendation information to the RFS/AO or MGR/AO, AMED, on each prospective qualified applicant, including:
(a) The designee candidate’s application form;
(b) Information regarding equipment and facilities; and
(c) Any other pertinent information, references, or recommendations.
f. Selection Notification. DMS will:
(1) Notify all applicants of their application status;
(2) Notify applicants that are not selected; and
(3) Maintain the data for the Certificate Letter of Authority (CLOA).
Chapter 4. Designee Appointment
1. Purpose. This chapter provides the policy related to the appointment of AME designees, referred to collectively in this chapter as designees. This designation type-specific policy and Volume 1 constitute the overall policy for the appointment of AMEs.
2. General. › f. Designation of Military Flight Surgeons. Management of military…
2. General.
a. Procedures for Initial Designation. Prior to designation, each AME applicant will provide a signed statement confirming that:
(1) Designation is a privilege, not a right.
(2) Designations may be terminated any time the FAA determines it is in the agency’s best interest.
(3) There are no past or current restrictions of medical practice, and there are no adverse actions proposed or pending that would limit medical practice by any state licensing board, the Drug Enforcement Administration (DEA), any medical society, any hospital staff, or by any other local, state, or Federal organization that may have licensing or certification authority.
(4) There are no known investigations, charged indictments, or pending actions in any local, state, or Federal court.
b. Training Requirement Prior to Appointment. All applicants must have satisfactorily completed the initial training specified in Chapter 7, Training, prior to being appointed as an AME.
c. Notification. The FAA will notify all applicants of the status of their designations via the Message Center in DMS. DMS will hold their certificate of designation and all necessary forms and supplies.
d. RFSs/AOs. RFSs/AOs act as the SO or AO for AMEs who conduct FAA medical examinations within the geographic boundaries of their regions. The RFS/AO may delegate SO responsibilities to the AME PAs/MSs. This delegation only authorizes the SO to make a recommendation. The Deputy Regional Flight Surgeon (DRFS), while acting for the respective RFS, can perform AO duties.
e. The MGR/AO, AMED. The MGR/AO, AMED, acts as the SO or AO for AMEs who are U.S. military flight surgeons, medical officers at Federal agencies, and for those who are located in foreign countries or areas not under the jurisdiction of one of the domestic regional medical offices. In this capacity, the manager functions as the RFS/AO for the international, military, Federal, or official AMEs. The MGR/AO, AMED, may delegate SO responsibilities to the international, military, Federal, or official AME PA/MS. This delegation only authorizes the SO to make a recommendation.
f. Designation of Military Flight Surgeons. Management of military flight surgeon AMEs is the same as for any other designee with a few exceptions. The military surgeon general
i. Authority to Perform First-Class Examinations. › (1) To obtain designation as a senior AME, the physician shall…
requested that military AMEs perform only second- and third-class examinations; however, limited authority to perform first-class examinations may be granted to certain military or other Federal operations after coordination with the appropriate surgeon general’s office. All administrative functions pertaining to active military AMEs will be handled by the MGR/AO, AMED. Military AMEs are restricted to Class 2 and Class 3 medical certificates. An exception to the policy may be requested by a service surgeon general to meet extenuating military need. Additionally, pilots who receive their Class 2 medical certificate from a military AME may not request an upgrade to Class 1 by later supplying an electrocardiogram (ECG) to the Aerospace Medical Certification Division (AMCD).
g. Procedures for Dual AME Designations in Civilian and Governmental Capacities. Civilian AMEs who function as reserve component flight surgeons (Air Force, Navy, and Army) may request permission from the appropriate civilian RFS/AO to perform AME duties at their military location.
(1) Civilian AMEs are most likely to perform more examinations in their civilian practice than in a military setting; therefore, the civilian RFS/AO will perform all oversight activity, and performance information from both practices will be combined for reporting purposes.
(2) If a guard or reserve AME is seeking civilian designation and is approved by the civilian RFS/AO, oversight of their activity will be transferred from the military region to the gaining civilian region.
(3) AMEs who have been designated to function with civilian and military capacity shall only be assigned a single AME number, normally retaining the number from their initial designation.
(4) The same principle of single regional management shall apply if an AME seeks dual designation as a civilian and Federal AME.
(5) At the request of the military surgeons general, no military AME will be designated as a senior AME for performance of FAA examinations while in a military status unless waivered by the appropriate surgeon general; however, dually designated AMEs may hold a senior AME rating in their capacity as a civilian AME.
h. Designations of Physicians in Foreign Countries. Many foreign countries do not have a medical licensing system similar to that of the United States, so it is often difficult to obtain reliable information about an applicant’s status as a physician. If a country does not have a “Certificate of Good Standing” or equivalent, like those of Canada and the United Kingdom, the international AME PA/MS must request the appropriate U.S. embassy or consulate complete a professional background check.
i. Authority to Perform First-Class Examinations.
(1) To obtain designation as a senior AME, the physician shall demonstrate compliance with the requirements for continued service as an AME and have an acceptable record performing second- and third-class examinations for at least three years.
Note: Only senior AMEs have the authority to perform first-class examinations.
Chapter 4. Designee Appointment › 4. Appointment Duration.
(2) Exceptions to the 3-year requirement may be granted by the RFS/AO or MGR/AO and are based on the AME’s prior military experience as a flight surgeon, residency training in aerospace medicine, previous AME experience, or an immediate exceptional need in a particular locality.
(3) International AMEs are always immediately designated as senior AMEs, given that their designation is in response to the need for AMEs to be conveniently located to examine U.S.-certified pilots who are based overseas and who require first-class certificates.
3. CLOA. The certificate of designation and designation letter are combined and represented by the CLOA.
a. Affirm Statement. Each AME applicant will affirm in DMS that there are no past or current restrictions of medical practice, and no adverse actions proposed or pending that would limit medical practice by any state licensing board, the DEA, any medical society, any hospital staff, or by any other local, state, or Federal organization that may have licensing or certification authority.
4. Appointment Duration. Designations of physicians as AMEs are effective for 1 year, as recorded in DMS, unless terminated by the FAA prior to the end of the 1-year term or resignation.
Chapter 5. Responsibilities and Obligations of a Designee
1. Purpose. This chapter provides the policy related to the responsibilities and obligations of AME designees, referred to collectively in this chapter as designees. This designation type-specific policy and Volume 1 constitute the overall policy for the responsibilities and obligations of an AME.
(2) The AME applicant must have adequate facilities in order to perform… › (a) Vision testing equipment.
2. Designee Responsibilities.
a. AMEs Must:
(1) Serve as aviation safety experts within their communities, advising on aeromedical issues;
(2) Ensure that medical certificates are issued only to applicants who meet the FAA’s standards for medical certification; and
(3) Use acceptable equipment and adequate facilities in order to carry out the prescribed examinations.
b. AMEs Should:
(1) Maintain familiarity with general medical certification;
(2) Maintain familiarity with general medical knowledge applicable to aviation in order to properly discharge the duties associated with these responsibilities;
(3) Have detailed knowledge and understanding of FAA rules, regulations, policies, and procedures related to the medical certification of airmen;
(4) Charge reasonable fees that are customary for a comparable medical examination service in the geographic area where the AME is located; and
(5) Refrain from performing tests that are not required by the Guide for Aviation Medical Examiners or not medically indicated by history or physical findings.
c. Facilities and Equipment.
(1) The applicant must be engaged in the practice of medicine at an established office address that the RFS/AO or MGR/AO, AMED, has approved.
(2) The AME applicant must have adequate facilities in order to perform the required examinations and possess the following equipment prior to conducting any FAA examinations:
(a) Vision testing equipment. The required equipment is listed in the current Guide for Aviation Medical Examiners. This online guide may be viewed from the FAA website, https://www.faa.gov, by typing Guide for Aviation Medical Examiners in the search box and selecting the appropriate link.
Continue reading ↓ 120 of 1071 passages shown