Radar Vectors
Proposed Rule Proposed Issued Apr 15, 2019 149 pages Copy saved Nov 17, 2026

84 FR 15296 Streamlined Launch and Reentry Licensing Requirements

This rulemaking would streamline and increase flexibility in the FAA's commercial space launch and reentry regulations, and remove obsolete requirements. This action would consolidate and revise multiple regulatory parts and apply a single set of licensing and safety regulations across several types of operations and vehicles. The proposed rule would describe the requirements to obtain a vehicle operator license, the safety requirements, and the terms and conditions of a vehicle operator license.

This document is proposed. It may have been replaced. Check the official source before relying on it.

Official source ↗ Official PDF ↗

↑ Earlier in this document

E. Paperwork Reduction Act

Annual Burden Estimate: Most changes in part 450 would result in a reduction in the paperwork burden. The paperwork associated with industry requesting waivers to certain provisions would be alleviated. Paperwork associated with industry requesting license modifications would also be reduced because an operator would not have to modify a license if the specific safety official were to change. In addition, with the extension of RLV licenses to up to five years, it is likely that fewer licenses would be issued, resulting in less paperwork. Due to the change in launch scope, the documentation accompanying a ground hazard analysis for ELV operators would be reduced. Industry Cost Savings

The following table indicates the frequency of responses, the estimated time per response, the burdened wage rate, annual hours, and the cost for each cost saving provision. Response frequency is provided for the estimated number of waivers avoided (§ 450.3), estimated reduction in annual number of licenses modified (§ 450.103), estimated reduction in annual license renewals, and the estimated annual number of launches for which there would be a reduction in ground hazard analysis paperwork (§ 450.185). An estimated time for each response is also indicated below, as are burdened hourly wage rates for the specific personnel associated with each provision and annual hours and total cost savings.

Industry Paperwork Cost Savings

Estimated time

Description Response per response Industry wage Annual hours Cost savings

frequency (hours) rate

Waiver Avoidance (Sec. 450.3). 17 20 $100.03 340 $34,010

System Safety Program--Safety 5.6 24 71.01 134.4 9,544

Official (Sec. 450.103) …

Duration of a Vehicle License 1.2 126.5 81.28 151.8 12,338

(Sec. 450.7) …

Ground Safety (Sec. 450.185).. 1 340 81.28 340 27,634

Total Annual Savings … … … … 966 83,526

Cost savings includes paperwork related to waivers avoided due to the definition of launch, waterborne vessel protection, and removal of 48-hour readiness requirement. Industry Paperwork Burden

Other changes would result in an increase in paperwork burden. The Payload Review and Determination section (§ 450.43) would add requirements for applicants to provide explosive potential of payload materials, alone and in combination with other materials on the payload for launches, as well as the appropriate transit time to final orbit for payloads with significant transit time after release from vehicle. The FAA is adding requirements for ground hazard analysis (§ 450.185) for RLV launches. The proposed rule would require RLVs to submit information to the FAA.

The table below indicates the frequency of responses, estimated time per response, burdened hourly wage rate, annual hours, and the cost for each provision that would add burden. Response frequency is provided for the estimated number of explosive potential and transit time calculations, and the estimated number of annual RLV applications which would require ground hazard analysis. An estimated time per response is also indicated below, as are burdened hourly wage rates for the specific personnel associated with each provision and annual hours and total cost savings.

Industry Paperwork Burden

Estimated time

Description Response per response Industry wage Annual hours Cost

frequency (hours) rate

Explosive Potential (Sec. 50 2 $81.28 100 $8,128

450.43) …

Transit time (Sec. 450.43).... 50 0.5 81.28 25 2,032

Ground Safety (Sec. 450.185).. 2 36 81.28 72 5,852

Total Cost Burden … … … … 197 16,012

The following table summarizes the industry total annual paperwork savings, total annual burden and the net annual savings.

Industry Net Paperwork Savings

Description Annual hours Cost savings

Total Annual Savings … 966 $83,526

Total Annual Burden … 197 16,012

Net Annual Savings … 769 67,514

Paperwork Burden to the Federal Government

The following tables summarizes FAA paperwork savings and burden. Similar to industry burden savings, the FAA would receive burden relief from waivers avoided due to the definition of launch, waterborne vessel protection, and removal of the 48-hour readiness requirement. See the Regulatory Impact Analysis available in the docket for more details on these estimates and calculations.

Paperwork Burden to the Federal Government

FAA Paperwork Cost Savings

Estimated time

Description per response FAA wage rate Annual hours Cost savings

(hours)

Waiver Avoidance (Sec. 450.3) … 7.5 $83.26 127.5 $10,616

System Safety Program--Safety Official (Sec. 24 82.88 134.4 11,139

450.103) …

Duration of a Vehicle License (Sec. 450.7).... 253.5 83.61 304.2 25,434

Ground Safety (Sec. 450.185) … 439 82.88 439 36,384

Total Annual Savings … … … 1,005 83,573

FAA Paperwork Burden

Estimated time

Description per response FAA wage rate Annual hours Cost savings

(hours)

Explosive Potential (Sec. 450.43) … 2.0 $82.88 100 $8,288

Transit time (Sec. 450.43) … 0.5 82.88 25 2,072

Ground Safety (Sec. 450.185) … 40 82.88 80 6,630

Total Annual Burden … … … 205 16,990

FAA Net Paperwork Savings

Description Annual hours Cost savings

Total Annual Savings … 1,005 $83,573

Total Annual Burden … 205 16,990

Net Annual Savings … 800 66,583

Voluntary One-Time Modification of Existing Licenses

Voluntary One-Time Modification of Existing Licenses

There are currently 24 active licenses held by 12 operators. Once the rule is in effect, existing licenses would be grandfathered under the current provisions, unless the licenses are modified. Operators may choose to modify their licenses to benefit from the cost saving provisions of the proposed rule--some operators may choose also to wait until they apply for a new license. The FAA assumes modifications of licenses would occur within the first year after the rule is effective. The FAA assumes it would take about one month for an industry aerospace engineer to develop documentation and analysis to apply for a modification of an existing license and about two weeks for an FAA employee to review an application for a modification of an existing license.

The following estimates assume all licenses would be modified. This overestimates paperwork costs, since some operators may not find it advantageous to modify their existing licenses. The FAA requests comment on these assumptions and the following estimates to apply for applications to modify existing licenses. Specifically, the FAA requests information if licenses holders would modify existing licenses for changes from this proposed rule or wait to apply for new licenses. The FAA may revise these assumptions and estimates for the final rule.

Industry Burden Costs for Applications To Modify Existing Licenses

Time (one month

Year Wage rate of work hours) Cost per Number of Total burden Total costs

* license licenses hours

1 … $81.28 173 $14,061 24 4,152 $337,457

* One month of work hours based on the following calculations: 52 work weeks/year x 40 work hours/week = 2,080 work hours/year; and, 2,080 work hours/

* One month of work hours based on the following calculations: 52 work weeks/year x 40 work hours/week = 2,080 work hours/year; and, 2,080 work hours/

year / 12 months = 173 work hours/month (rounded).

FAA Burden Costs To Review Applications To Modify Existing Licenses

Hours (two

Year Wage rate weeks of work Cost per Number of Total burden Total costs

hours) license licenses hours

1 … $82.88 80 $6,630 24 1,920 $159,130

The agency is soliciting comments to--

(1) Evaluate whether the proposed information requirement is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;

(2) Evaluate the accuracy of the agency's estimate of the burden;

(3) Enhance the quality, utility, and clarity of the information to be collected; and

(4) Minimize the burden of collecting information on those who are to respond, including by using appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology.

Individuals and organizations may send comments on the information collection requirement to the address listed in the ADDRESSES section at the beginning of this preamble by June 14, 2019. Comments also should be submitted to the Office of Management and Budget, Office of Information and Regulatory Affairs, Attention: Desk Officer for FAA, New Executive Building, Room 10202, 725 17th Street NW, Washington, DC 20053.

F. International Compatibility

F. International Compatibility

In keeping with U.S. obligations under the Convention on International Civil Aviation, it is FAA policy to conform to International Civil Aviation Organization (ICAO) Standards and Recommended Practices to the maximum extent practicable. The FAA has determined that there are no ICAO Standards and Recommended Practices that correspond to these proposed regulations.

G. Environmental Analysis

G. Environmental Analysis

FAA Order 1050.1F identifies FAA actions that are categorically excluded from preparation of an environmental assessment or environmental impact statement under the National Environmental Policy Act in the absence of extraordinary circumstances. The FAA has determined this rulemaking action qualifies for the categorical exclusion identified in paragraph 5-6.6 and involves no extraordinary circumstances.

V. Executive Order Determinations

V. Executive Order Determinations

A. Executive Order 13132, Federalism

The FAA has analyzed this proposed rule under the principles and criteria of Executive Order 13132, Federalism. The agency has determined that this action would not have a substantial direct effect on the States, or the relationship between the Federal Government and the States, or on the distribution of power and responsibilities among the various levels of government, and, therefore, would not have Federalism implications.

B. Executive Order 13211, Regulations That Significantly Affect Energy Supply, Distribution, or Use

B. Executive Order 13211, Regulations That Significantly Affect Energy Supply, Distribution, or Use

The FAA analyzed this proposed rule under Executive Order 13211, Actions Concerning Regulations that Significantly Affect Energy Supply, Distribution, or Use (May 18, 2001). The agency has determined that it would not be a "significant energy action" under the executive order and would not be likely to have a significant adverse effect on the supply, distribution, or use of energy.

C. Executive Order 13609, International Cooperation

C. Executive Order 13609, International Cooperation

Executive Order 13609, Promoting International Regulatory Cooperation, promotes international regulatory cooperation to meet shared challenges involving health, safety, labor, security, environmental, and other issues and to reduce, eliminate, or prevent unnecessary differences in regulatory requirements. The FAA has analyzed this action under the policies and agency responsibilities of Executive Order 13609, and has determined that this action would have no effect on international regulatory cooperation.

D. Executive Order 13771, Reducing Regulation and Controlling Regulatory Costs

D. Executive Order 13771, Reducing Regulation and Controlling Regulatory Costs

This proposed rule is expected to be a deregulatory action under Executive Order 13771 and would result in net cost savings for industry that would likely reduce the future cost of innovation in U.S. commercial space transportation. The Preliminary Regulatory Impact Analysis for the proposed rule provides additional information.

VI. Additional Information

VI. Additional Information

A. Comments Invited

The FAA invites interested persons to participate in this rulemaking by submitting written comments, data, or views. Also, the agency invites comments regarding potential overlap with the regulatory requirements of other agencies not addressed in this proposed rule. In addition, the FAA invites comments relating to the economic, environmental, energy, or federalism impacts that might result from adopting the proposals in this document. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are filed electronically, commenters should submit only one time.

A. Comments Invited

The FAA will file in the docket all comments it receives, as well as a report summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before acting on this proposal, the FAA will consider all comments it receives on or before the closing date for comments. The FAA will consider comments filed after the comment period has closed if it is possible to do so without incurring expense or delay. The agency may change this proposal in light of the comments it receives.

Proprietary or Confidential Business Information: Commenters should not file proprietary or confidential business information in the docket. Such information must be sent or delivered directly to the person identified in the FOR FURTHER INFORMATION CONTACT section of this document, and marked as proprietary or confidential. If submitting information on a disk or CD ROM, mark the outside of the disk or CD ROM, and identify electronically within the disk or CD ROM the specific information that is proprietary or confidential.

Under 14 CFR 11.35(b), if the FAA is aware of proprietary information filed with a comment, the agency does not place it in the docket. It is held in a separate file to which the public does not have access, and the FAA places a note in the docket that it has received it. If the FAA receives a request to examine or copy this information, it treats it as any other request under the Freedom of Information Act (5 U.S.C. 552). The FAA processes such a request under Department of Transportation procedures found in 49 CFR part 7.

B. Availability of Rulemaking Documents

B. Availability of Rulemaking Documents

An electronic copy of rulemaking documents may be obtained from the internet by--Searching the Federal eRulemaking Portal (http://www.regulations.gov);

Visiting the FAA's Regulations and Policies web page at http://www.faa.gov/regulations_policies or

Accessing the Government Printing Office's web page at http://www.gpo.gov/fdsys/.

Copies may also be obtained by sending a request to the Federal Aviation Administration, Office of Rulemaking, ARM-1, 800 Independence Avenue SW, Washington, DC 20591, or by calling (202) 267-9680. Commenters must identify the docket or notice number of this rulemaking.

All documents the FAA considered in developing this proposed rule, including economic analyses and technical reports, may be accessed from the internet through the Federal eRulemaking Portal referenced in item (1) above.

List of Subjects

List of Subjects

14 CFR Part 401

Organization and functions (Government agencies), Space transportation and exploration.

14 CFR Part 404

Administrative practice and procedure, Space transportation and exploration.

14 CFR Part 413

Confidential business information, Space transportation and exploration.

14 CFR Part 414

14 CFR Part 414

Airspace, Aviation safety, Space transportation and exploration.

14 CFR Part 420

Environmental protection, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 437

Aircraft, Aviation safety, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 440

14 CFR Part 440

Indemnity payments, Insurance, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 450

Aircraft, Aviation safety, Environmental protection, Investigations, Reporting and recordkeeping requirements, Space transportation and exploration.

The Proposed Amendment

The Proposed Amendment

In consideration of the foregoing, the Federal Aviation Administration proposes to amend chapter III of title 14, Code of Federal Regulations as follows:

PART 401--ORGANIZATION AND DEFINITIONS

1. The authority citation for part 401 continues to read as follows:

PART 401--ORGANIZATION AND DEFINITIONS

Authority: 51 U.S.C. 50101-50923.

2. In § 401.5: a. Add, in alphabetical order, the definitions of "Anomaly," "Casualty area," and "Command control system"; b. Revise the definition of "Contingency abort"; c. Add, in alphabetical order, the definitions of "Control entity," "Countdown," "Critical asset," "Crossrange," "Data loss flight time," "Deorbit," "Disposal," "Dose-response relationship," "Downrange," and "Effective casualty area"; d. Remove the definition of "Emergency abort"; e. Add, in alphabetical order, the definition of "Expected casualty," "Explosive debris," "Flight abort," "Flight abort crew," "Flight abort rules," "Flight hazard area," and "Flight safety limit"; f. Revise the definition of "Flight safety system"; g. Add, in alphabetical order, the definitions of "Gate" and "Hazard control"; h. Remove the definition of "Human space flight incident"; i. Revise the definitions of "Instantaneous impact point" and "Launch"; j. Remove the definitions of "Launch accident" and "Launch incident"; k.

Add, in alphabetical order, the definitions of "Launch or reentry system," "Launch window," "Liftoff," and "Limits of a useful mission"; l. Revise the definition of "Mishap"; m. Add, in alphabetical order, the definitions of "Mishap, Class 1," "Mishap, Class 2," "Mishap, Class 3", "Mishap, Class 4," "Neighboring operations personnel," "Normal flight," "Normal trajectory," "Operating environment," and "Operation hazard"; n. Revise the definition of "Operator"; o. Add, in alphabetical order, the definitions of "Orbital insertion," "Physical containment," "Probability of casualty," and "Public"; p. Remove the definition of "Public safety"; q. Revise the definition of "Reenter; reentry"; r. Remove the definitions of "Reentry accident" and "Reentry incident"; s. Add, in alphabetical order, the definition of "Reentry window"; t. Revise the definition of "Safety critical"; u. Add, in alphabetical order, the definitions of "Service life" and "Software function"; v. Revise the definition of "State and United States"; w.

Add, in alphabetical order, the definitions of "Sub-vehicle point," "System hazard," "Toxic hazard area," "Tracking icon," "Uncontrolled area," "Unguided suborbital launch vehicle," "Uprange," and "Vehicle response modes"; x. Remove the definition of "Vehicle safety operations personnel"; and y. Add, in alphabetical order, the definitions of "Wind weighting safety system" and "Window closure".

The additions and revisions read as follows:

§ 401.5 Definitions.

* * * * *

Anomaly means any condition during licensed or permitted activity that deviates from what is standard, normal, or expected, during the verification or operation of a system, subsystem, process, facility, or support equipment. * * * * *

Casualty area means the area surrounding each potential debris or vehicle impact point where serious injuries, or worse, can occur.

Command control system means the portion of a flight safety system that includes all components needed to send a flight abort control signal to the on-board portion of a flight safety system.

Contingency abort means a flight abort with a landing at a planned location that has been designated in advance of vehicle flight.

Control entity means a person or device that can control another device or process.

Countdown means the timed sequence of events that must take place to initiate flight of a launch vehicle or reentry of a reentry vehicle. * * * * *

Critical asset means an asset that is essential to the national interests of the United States. Critical assets include property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions.

Crossrange means the distance measured along a line whose direction is either 90 degrees clockwise (right crossrange) or counter-clockwise (left crossrange) to the projection of a vehicle's planned nominal velocity vector azimuth onto a horizontal plane tangent to the ellipsoidal Earth model at the vehicle's sub-vehicle point. The terms right crossrange and left crossrange may also be used to indicate direction.

Data loss flight time means the shortest elapsed thrusting or gliding time during which a vehicle flown with a flight safety system can move from its trajectory to a condition where it is possible for the vehicle to violate a flight safety limit.

Deorbit means the flight of a vehicle that begins with the final command to commit to a perigee below 70 nautical miles (approximately 130 kilometers), and ends when all vehicle components come to rest on the Earth.

Disposal means the return or attempt to return, purposefully, a launch vehicle stage or component, not including a reentry vehicle, from Earth orbit to Earth, in a controlled manner.

Dose-response relationship means a quantitative methodology used to assign a probability of casualty within a population group given exposure to a toxic chemical of known or predicted concentration and duration.

Downrange means the distance measured along a line whose direction is parallel to the projection of a vehicle's planned nominal velocity vector azimuth into a horizontal plane tangent to the ellipsoidal Earth model at the vehicle sub-vehicle point. The term downrange may also be used to indicate direction.

Effective casualty area means the aggregate casualty area of each piece of debris created by a vehicle failure at a particular point on its trajectory. The effective casualty area for each piece of debris is a modeling construct in which the area within which 100 percent of the population are assumed to be a casualty, and outside of which 100 percent of the population are assumed not to be a casualty. * * * * *

Expected casualty means the mean number of casualties predicted to occur per flight operation if the operation were repeated many times. * * * * *

Explosive debris means solid propellant fragments or other pieces of a vehicle or payload that result from breakup of the vehicle during flight and that explode upon impact with the Earth's surface and cause overpressure. * * * * *

Flight abort means the process to limit or restrict the hazards to public health and safety, and the safety of property, presented by a launch vehicle or reentry vehicle, including any payload, while in flight by initiating and accomplishing a controlled ending to vehicle flight.

Flight abort crew means the personnel who make a flight abort decision.

Flight abort rules means the conditions under which a flight safety system must abort the flight to ensure compliance with public safety criteria. * * * * *

Flight hazard area means any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to protect public health and safety and the safety of property.

Flight safety limit means criteria to ensure that public safety is protected from the flight of a vehicle when a flight safety system functions properly.

Flight safety system means a system used to implement flight abort. A human can be a part of a flight safety system.

Gate means the portion of a flight safety limit boundary through which the tracking icon of a vehicle flown with a flight safety system may pass without flight abort, provided the flight remains within specified parameters.

Hazard control means a preventative measure or mitigation put in place for systems or operations to reduce the severity of a hazard or the likelihood of the hazard occurring. * * * * *

Instantaneous impact point means a predicted impact point, following thrust termination of a vehicle.

Launch means to place or try to place a launch vehicle or reentry vehicle and any payload or human being from Earth in a suborbital trajectory, in Earth orbit in outer space, or otherwise in outer space, including activities involved in the preparation of a launch vehicle or payload for launch, when those activities take place at a launch site in the United States. * * * * *

Launch or reentry system means the integrated set of subsystems, personnel, products, and processes that, when combined together, safely carries out a launch or reentry. * * * * *

Launch window means a period of time during which the flight of a launch vehicle may be initiated.

Liftoff means any motion of the launch vehicle with intention to initiate flight.

Limits of a useful mission means the trajectory data or other parameters that describe the limits of a mission that can attain the primary objective, including flight azimuth limits.

Mishap means any event, or series of events associated with a licensed or permitted activity, that meets the criteria of a Class 1, 2, 3 or 4 mishap.

Mishap, Class 1 means any event resulting in one or more of the following:

(1) A fatality or serious injury (as defined in 49 CFR 830.2) as a result of licensed or permitted activity to any person who is not associated with the licensed or permitted activity, including ground activities at a launch or reentry site; or

(2) A fatality or serious injury to any space flight participant, crew, or government astronaut.

Mishap, Class 2 means any event, other than a Class 1 mishap, resulting in one or more of the following:

(1) A malfunction of a flight safety system or safety-critical system; or

(2) A failure of the licensee's or permittee's safety organization, safety operations, safety procedures; or

(3) High risk, as determined by the FAA, of causing a serious or fatal injury to any space flight participant, crew, government astronaut, or member of the public; or

(4) Substantial damage, as determined by the FAA, to property not associated with licensed or permitted activity.

Mishap, Class 3 means any unplanned event, other than a Class 1 or Class 2 mishap, resulting in one or more of the following:

(1) Permanent loss of a launch or reentry vehicle during licensed activity; or

(2) The impact of a licensed or permitted launch or reentry vehicle, its payload, or any component thereof outside the planned landing site or designated hazard area.

Mishap, Class 4 means an unplanned event, other than a Class 1, Class 2, or Class 3 mishap, resulting in one or more of the following:

(1) Permanent loss of a vehicle during permitted activity;

(2) Failure to achieve mission objectives; or

(3) Substantial damage, as determined by the FAA, to property associated with licensed or permitted activity.

Neighboring operations personnel means, as determined by the Federal or licensed launch or reentry site operator, those members of the public located within a launch or reentry site, or an adjacent launch or reentry site, who are not associated with a specific hazardous licensed or permitted operation currently being conducted but are required to perform safety, security, or critical tasks at the site and are notified of the operation. * * * * *

Normal flight means the flight of a properly performing vehicle whose real-time vacuum instantaneous impact point does not deviate from the nominal vacuum instantaneous impact point by more than the sum of the wind effects and the three-sigma guidance and performance deviations in the uprange, downrange, left-crossrange, or right-crossrange directions.

Normal trajectory means a trajectory that describes normal flight.

Operating environment means an environment that a launch or reentry vehicle component will experience during its lifecycle. Operating environments include shock, vibration, thermal cycle, acceleration, humidity, and thermal vacuum.

Operation hazard means a hazard created by an operating environment or by an unsafe act. * * * * *

Operator means a holder of a license or permit under 51 U.S.C. Subtitle V, chapter 509.

Orbital insertion means the point at which a vehicle achieves a minimum 70-nautical mile perigee based on a computation that accounts for drag. * * * * *

Physical containment means a launch vehicle does not have sufficient energy for any hazards associated with its flight to reach the public or critical assets. * * * * *

Probability of casualty means the likelihood that a person will suffer a serious injury or worse, including a fatal injury, due to all hazards from an operation at a specific location.

Public means, for a particular licensed or permitted launch or reentry, people and property that are not involved in supporting the launch or reentry and includes those people and property that may be located within the launch or reentry site, such as visitors, individuals providing goods or services not related to launch or reentry processing or flight, and any other operator and its personnel.

Reenter; reentry means to return or attempt to return, purposefully, a reentry vehicle and its payload or human being, if any, from Earth orbit or from outer space to Earth. * * * * *

Reentry window means a period of time during which the reentry of a reentry vehicle may be initiated. * * * * *

Safety critical means essential to safe performance or operation. A safety-critical system, subsystem, component, condition, event, operation, process, or item, is one whose proper recognition, control, performance, or tolerance, is essential to ensuring public safety.

Service life means, for a safety-critical system component, the sum total of the component's storage life and operating life. * * * * *

Software function means a collection of computer code that implements a requirement or performs an action. This includes firmware and operating systems. * * * * *

State and United States means, when used in a geographical sense, the several States, the District of Columbia, the Commonwealth of Puerto Rico, American Samoa, the United States Virgin Islands, Guam, and any other commonwealth, territory, or possession of the United States.

Sub-vehicle point means the location on an ellipsoidal Earth model where the normal to the ellipsoid passes through the vehicle's center of gravity.

System hazard means a hazard associated with a system and generally exists even when no operation is occurring. * * * * *

Toxic hazard area means a region on the Earth's surface where toxic concentrations and durations may be greater than approved toxic thresholds for acute casualty, in the event of a release during launch or reentry.

Tracking icon means the representation of a vehicle's instantaneous impact point, debris footprint, or other vehicle performance metric used during real-time tracking of the vehicle's flight.

Uncontrolled area is an area of land not controlled by a launch or reentry operator, a launch or reentry site operator, an adjacent site operator, or other entity by agreement.

Unguided suborbital launch vehicle means a suborbital rocket that does not contain active guidance or a directional control system. * * * * *

Uprange means the distance measured along a line that is 180 degrees to the downrange direction. * * * * *

Vehicle response modes means mutually exclusive scenarios that characterize foreseeable combinations of vehicle trajectory and debris generation. * * * * *

Wind weighting safety system means equipment, procedures, analysis and personnel functions used to determine the launcher elevation and azimuth settings that correct for wind effects that an unguided suborbital launch vehicle will experience during flight.

Window closure means a period of time when launch or reentry is not permitted in order to avoid a collision with an object in orbit. A window closure may occur within a launch or reentry window, may delay the start of a window, or terminate a window early.

PART 404--REGULATIONS AND LICENSING REQUIREMENTS

PART 404--REGULATIONS AND LICENSING REQUIREMENTS

3. The authority citation for part 404 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

4. Revise § 404.5 to read as follows:

§ 404.5 Filing a petition for waiver.

(a) A petition for waiver must be submitted at least 60 days before the proposed effective date of the waiver, unless the Administrator agrees to a different time frame in accordance with § 404.15.

(b) The petition for waiver must include:

(1) The specific section or sections of this chapter from which the petitioner seeks relief;

(2) The extent of the relief sought and the reason the relief is being sought;

(3) The reason why granting the request for relief is in the public interest and will not jeopardize the public health and safety, safety of property, and national security and foreign policy interests of the United States; and

(4) Any additional facts, views, and data available to the petitioner to support the waiver request. 5. Add § 404.15 to read as follows:

§ 404.15 Alternative time frames.

(a) General. Unless otherwise approved by the Administrator, an applicant, a licensee, a permittee, or a safety element approval holder must meet the time frames set forth in this chapter.

(b) Request to change a time frame. A person may file a written request to the FAA to propose an alternative time frame to any of the time frames included in the sections listed in appendix A to this part. The request must be--

(1) Submitted no later than the specific time frame included in the regulation; and

(2) Emailed to [email protected]; or

(3) Mailed to the Federal Aviation Administration, Associate Administrator for Commercial Space Transportation, Room 331, 800 Independence Avenue SW, Washington, DC 20591. Attention: Alternative Time Frame Request.

(c) Administrator review. The Administrator will review and make a decision or grant a request for an alternative time-frame as follows:

(1) The FAA will conduct its review on a case-by-case basis, taking into account the complexity of the request and whether it allows sufficient time for the FAA to conduct its review and make the requisite public health and safety, safety of property, and national security and foreign policy findings; and

(2) The FAA will provide its decision in writing. 6. Add appendix A to part 404 the read as follows:

Appendix A to Part 404--Alternative Time Frames

Appendix A to Part 404--Alternative Time Frames

A404.1 GENERAL

Alternative time frames. This appendix lists the sections and corresponding paragraphs in this chapter that provide the eligible time frames for an applicant, licensee, permittee or a safety element approval holder, as applicable, to request an alternative time frame.

A404.1 GENERAL

Table A404.1--Eligible Time Frames

49 CFR Paragraphs

Sec. 404.5--Filing a petition for waiver … (a)

Sec. 413.23--License or permit renewal … (a)

§ 414.31--Safety element approval renewal.. (a)

Sec. 420.57--Notifications … (d)

Sec. 437.89--Preflight reporting … (a), (b)

Sec. 440.15--Demonstration of compliance … (a)(1), (a)(2),

§ 414.31--Safety element approval renewal.. (a)

(a)(3), (a)(4)

Sec. 450.169-- Launch and Reentry Collision (f)(1)

Avoidance Analysis Requirements.

Sec. 450.213--Preflight reporting … (b), (c), (d), (e)

Sec. 450.215--Post-flight reporting … (a)

PART 413--APPLICATION PROCEDURES

7. The authority citation for part 413 continues to read as follows:

PART 413--APPLICATION PROCEDURES

Authority: 51 U.S.C. 50901-50923.

8. Revise the heading for part 413 to read as set forth above. 9. Revise § 413.1 to read as follows:

§ 413.1 Scope of this part.

(a) This part explains how to apply for a license or experimental permit. These procedures apply to all applications for obtaining a license or permit, transferring a license, and renewing a license or permit. In this part, the term application means either an application in its entirety, or a portion of an application for incremental review and determination in accordance with § 450.33 of this chapter.

(b) Use the following table to locate specific requirements:

Table 1 to Paragraph (b)

Subject Part

License to Operate a Launch Site … 420

License to Operate a Reentry Site … 433

Experimental Permits … 437

Launch And Reentry License Requirements … 450

10. Amend § 413.7 by revising the section heading and paragraph (a)(3) to read as follows:

§ 413.7 Application submission.

(a) * * *

(3) For an application submitted by email, an applicant must send the application as an email attachment, or as a link to a secure server, to [email protected]. The application and the email to which the application is attached or linked must also satisfy the following criteria:

(i) The email to which the application is attached or linked must be sent from an email address controlled by the person who signed the application or by an authorized representative of the applicant;

(ii) The email must identify each document that is included as an attachment or that is stored on a secure server; and

(iii) The electronic files must be date-stamped and have version control documentation. * * * * * 11. Amend § 413.11 by revising paragraph (a) to read as follows:

§ 413.11 Acceptance of an application.

* * * * *

(a) The FAA accepts the application and will initiate review; or * * * * * 12. Revise § 413.15 to read as follows:

§ 413.15 Review period.

(a) Review period duration. Unless otherwise specified in this chapter, the FAA reviews and makes a license or permit determination on an application within 180 days of receiving an accepted license application or within 120 days of receiving an accepted permit application. The FAA will establish the time frame for any incremental review and determination with an applicant on a case-by-case basis during pre-application consultation.

(b) Review period tolled. If an accepted application does not provide sufficient information to continue or complete the reviews or evaluations required by this chapter for a license, permit, or incremental determination, or an issue exists that would affect a determination, the FAA notifies the applicant, in writing, and informs the applicant of any information required to complete the application. If the FAA cannot review an accepted application because of lack of information or for any other reason, the FAA will toll the review period until the FAA receives the information it needs or the applicant resolves the issue.

(c) Notice. Unless applying under incremental review and determination in accordance with § 450.33 of this chapter, if the FAA does not make a decision within 120 days of receiving an accepted license application or within 90 days of receiving an accepted permit application, the FAA informs the applicant, in writing, of any outstanding information needed to complete the review, or of any issues that would affect the decision. 13. Amend § 413.21 by revising the section heading and paragraphs (b) and (c) to read as follows:

§ 413.21 Denial of a license or permit application.

* * * * *

(b) If the FAA has denied an application in its entirety, the applicant may either--

(1) Attempt to correct any deficiencies identified and ask the FAA to reconsider the revised application. The FAA has 60 days or the number of days remaining in the review period, whichever is greater, within which to reconsider the decision; or

(2) Request a hearing in accordance with part 406 of this chapter, for the purpose of showing why the application should not be denied.

(c) An applicant whose application is denied after reconsideration under paragraph (b)(1) of this section may request a hearing in accordance with paragraph (b)(2) of this section. 14. Revise part 414 to read as follows:

PART 414--SAFETY ELEMENT APPROVALS

Sec. Subpart A--General 414.1 Scope. 414.3 Definitions. 414.5 Applicability. 414.7 Eligibility. Subpart B--Application Procedures 414.9 Pre-application consultation. 414.11 Application. 414.13 Application separate from a vehicle operator license application. 414.15 Application concurrent with vehicle operator license application. 414.17 Confidentiality. 414.19 Processing the initial application.

PART 414--SAFETY ELEMENT APPROVALS

414.21 Maintaining the continued accuracy of the initial application.

Subpart C--Safety Element Approval Review and Issuance 414.23 Technical criteria for reviewing a safety element approval application. 414.25 Terms and conditions for issuing a safety element approval; duration of a safety element approval. 414.27 Maintaining the continued accuracy of the safety element approval application. 414.29 Safety element approval records. 414.31 Safety element approval renewal. 414.33 Safety element approval transfer. 414.35 Monitoring compliance with the terms and conditions of a safety element approval. 414.37 Modification, suspension, or revocation of a safety element approval. 414.39 [Reserved] Subpart D--Appeal Procedures 414.41 Hearings in safety element approval actions. 414.43 Submissions; oral presentations in safety element approval actions. 414.45 Administrative law judge's recommended decision in safety element approval actions.

Authority: 51 U.S.C. 50901-50923.

Subpart A--General

Subpart A--General

§ 414.1 Scope.

This part establishes procedures for obtaining a safety element approval and renewing and transferring an existing safety element approval. Safety element approvals issued under this part may be used to support the application review for one or more vehicle operator license requests under other parts of this chapter.

§ 414.3 Definitions.

For purposes of this part the following definitions apply:

Safety element approval. A safety element approval is an FAA document containing the FAA determination that one or more of the safety elements listed in paragraphs (1) and (2) of this definition, when used or employed within a defined envelope, parameter, or situation, will not jeopardize public health and safety or safety of property. A safety element approval may be issued independent of a license, and it does not confer any authority to conduct activities for which a license is required under this chapter. A safety element approval does not relieve its holder of the duty to comply with all applicable requirements of law or regulation that may apply to the holder's activities.

(1) Launch vehicle, reentry vehicle, safety system, process, service, or any identified component thereof; or

(2) Qualified and trained personnel, performing a process or function related to licensed activities or vehicles.

Safety element. A safety element is any one of the items or persons (personnel) listed in paragraphs (1) and (2) of the definition of "safety approval" in this section.

§ 414.5 Applicability.

This part applies to an applicant that wants to obtain a safety element approval for any of the safety elements defined under this part and to persons granted a safety element approval under this part. Any person eligible under this part may apply to become the holder of a safety element approval.

§ 414.7 Eligibility.

(a) There is no citizenship requirement to obtain a safety element approval.

(b) You may be eligible for a safety element approval if you are--

(1) A designer, manufacturer, or operator of a launch or reentry vehicle or component thereof;

(2) The designer or developer of a safety system or process; or

(3) Personnel who perform safety critical functions in conducting a licensed launch or reentry.

(c) A safety element approval applicant must have sufficient knowledge and expertise to show that the design and operation of the safety element for which safety element approval is sought qualify for a safety element approval.

(d) Only the safety elements defined under this part are eligible for a safety element approval. The applicant must consult with the FAA before submitting an application. Unless the applicant or the FAA requests another form of consultation, consultation is oral discussion with the FAA about the application process and the potential issues relevant to the FAA's safety element approval decision.

Subpart B--Application Procedures

Subpart B--Application Procedures

§ 414.9 Pre-application consultation.

The applicant must consult with the FAA before submitting an application. Unless the applicant or the FAA requests another form of consultation, consultation is oral discussion with the FAA about the application process and the potential issues relevant to the FAA's safety approval decision.

§ 414.11 Application.

An applicant may submit an application for a safety element approval in one of two ways:

(a) Separate from a vehicle operator license application in accordance with § 414.13; or

(b) Concurrent with a vehicle operator license application in accordance with § 414.15.

§ 414.13 Application separate from a vehicle operator license application.

(a) An applicant must make an application in writing and in English. The applicant must file the application with the Federal Aviation Administration either by paper, by use of physical electronic storage, or by email in the following manner:

(1) For an application submitted on paper, an applicant must send two copies of the application to the Federal Aviation Administration, Associate Administrator for Commercial Space Transportation, Room 331, 800 Independence Avenue SW, Washington, DC 20591. Attention: Application Review.

(2) For an application submitted by use of physical electronic storage, the applicant must either mail the application to the address specified in paragraph (a)(1) of this section or hand-deliver the application to an authorized FAA representative. The application and the physical electronic storage containing the application must also satisfy all of the following criteria:

(i) The application must include a cover letter that is printed on paper and signed by the person who signed the application or by an authorized representative of the applicant;

(ii) The cover letter must identify each document that is included on the physical electronic storage; and

(iii) The physical electronic storage must be in a format such that its contents cannot be altered.

(3) For an application submitted by email, an applicant must send the application as an email attachment, or as a link to a secure server, to [email protected]. The application and the email to which the application is attached must also satisfy the following criteria:

(i) The email to which the application is attached must be sent from an email address controlled by the person who signed the application or by an authorized representative of the applicant; and

(ii) The email must identify each document that is included as an attachment or that is stored on a secure server; and

(iii) The electronic files must be date-stamped and have version control documentation.

(b) The application must identify the following basic information:

(1) Name and address of the applicant.

(2) Name, address, and telephone number of any person to whom inquiries and correspondence should be directed.

(3) Safety element as defined under this part for which the applicant seeks a safety element approval.

(c) The application must contain the following technical information:

(1) A Statement of Conformance letter, describing the specific criteria the applicant used to show the adequacy of the safety element for which a safety element approval is sought, and showing how the safety element complies with the specific criteria.

(2) The specific operating limits for which the safety element approval is sought.

(3) The following as applicable:

(i) Information and analyses required under this chapter that may be applicable to demonstrating safe performance of the safety element for which the safety element approval is sought.

(ii) Engineering design and analyses that show the adequacy of the proposed safety element for its intended use, such that the use in a licensed launch or reentry will not jeopardize public health or safety or the safety of property.

(iii) Relevant manufacturing processes.

(iv) Test and evaluation procedures.

(v) Test results.

(vi) Maintenance procedures.

(vii) Personnel qualifications and training procedures.

(d) The application must be legibly signed, dated, and certified as true, complete, and accurate by one of the following:

(1) For a corporation, an officer or other individual authorized to act for the corporation in licensing or safety element approval matters.

(2) For a partnership or a sole proprietorship, a general partner or proprietor, respectively.

(3) For a joint venture, association, or other entity, an officer or other individual duly authorized to act for the joint venture, association, or other entity in licensing matters.

(e) Failure to comply with any of the requirements set forth in this section is sufficient basis for denial of a safety element approval application.

§ 414.15 Application concurrent with vehicle operator license application.

(a) An applicant for a vehicle operator license may also identify one or more sections of its application for which it seeks to obtain a safety element approval concurrently with a license. An applicant applying for a safety element approval concurrently with a license must--

(1) Meet the applicable requirements of part 450 of this chapter;

(2) Provide the information required in § 414.13(b)(3) and (c)(2) and (3); and

(3) Specify the sections of the license application that support its application for a safety element approval.

(b) The scope of the safety element approval will be limited to what the application supports. The technical criteria for reviewing a safety element submitted as part of a vehicle operator license application are limited to the applicable requirements of part 450 of this chapter.

§ 414.17 Confidentiality.

(a) To ensure confidentiality of data or information in the application, the applicant must--

(1) Send a written request with the application that trade secrets or proprietary commercial or financial data be treated as confidential, and include in the request the specific time frame confidential treatment is required.

(2) Mark data or information that require confidentiality with an identifying legend, such as "Proprietary Information," "Proprietary Commercial Information," "Trade Secret," or "Confidential Treatment Requested." Where this marking proves impracticable, attach a cover sheet that contains the identifying legend to the data or information for which confidential treatment is sought.

(b) If the applicant requests confidential treatment for previously submitted data or information, the FAA will honor that request to the extent practicable in case of any prior distribution of the data or information.

(c) Data or information for which confidential treatment is requested or data or information that qualifies for exemption under 5 U.S.C. 552(b)(4) will not be disclosed to the public unless the Associate Administrator determines that withholding the data or information is contrary to the public or national interest.

§ 414.19 Processing the initial application.

(a) The FAA will initially screen an application to determine if the application is complete enough for the FAA to start its review.

(b) After completing the initial screening, the FAA will inform the applicant in writing of one of the following:

(1) The FAA accepts the application and will begin the reviews or evaluations required for a safety element approval determination under this part.

(2) The FAA rejects the application because it is incomplete or indefinite making initiation of the reviews or evaluations required for a safety element approval determination under this part inappropriate.

(c) The written notice will state the reason(s) for rejection and corrective actions necessary for the application to be accepted. The FAA may return a rejected application to the applicant or may hold it until the applicant provides more information.

(d) The applicant may withdraw, amend, or supplement an application any time before the FAA makes a final determination on the safety element approval application by making a written request to the Associate Administrator. If the applicant amends or supplements the initial application, the revised application must meet all the applicable requirements under this part.

§ 414.21 Maintaining the continued accuracy of the initial application.

The applicant is responsible for the continuing accuracy and completeness of information provided to the FAA as part of the safety element approval application. If at any time after submitting the application, circumstances occur that cause the information to no longer be accurate and complete in any material respect, the applicant must submit a written statement to the Associate Administrator explaining the circumstances and providing the new or corrected information. The revised application must meet all requirements under § 414.13 or § 414.15.

Subpart C--Safety Element Approval Review and Issuance

Subpart C--Safety Element Approval Review and Issuance

§ 414.23 Technical criteria for reviewing a safety element approval application.

The FAA will determine whether a safety element is eligible for and may be issued a safety approval. We will base our determination on performance-based criteria, against which we may assess the effect on public health and safety and on safety of property, in the following hierarchy:

(a) FAA or other appropriate Federal regulations.

(b) Government-developed or adopted standards.

(c) Industry consensus performance-based criteria or standard.

(d) Applicant-developed criteria. Applicant-developed criteria are performance standards customized by the manufacturer that intends to produce the system, system component, or part. The applicant-developed criteria must define--

(1) Design and minimum performance;

(2) Quality assurance system requirements;

(3) Production acceptance test specifications; and

(4) Continued operational safety monitoring system characteristics.

§ 414.25 Terms and conditions for issuing a safety element approval; duration of a safety approval.

(a) The FAA will issue a safety element approval to an applicant that meets all the requirements under this part.

(b) The scope of the safety element approval will be limited by the scope of the safety demonstration contained in the application on which the FAA based the decision to grant the safety element approval.

(c) The FAA will determine specific terms and conditions of a safety element approval individually, limiting the safety element approval to the scope for which it was approved. The terms and conditions will include reporting requirements tailored to the individual safety element approval.

(d) A safety element approval is valid for five years and may be renewed.

§ 414.27 Maintaining the continued accuracy of the safety element approval application.

(a) The holder of a safety element approval must ensure the continued accuracy and completeness of representations contained in the safety element approval application, on which the approval was issued, for the entire term of the safety element approval.

(b) If any representation contained in the application that is material to public health and safety or safety of property ceases to be accurate and complete, the safety element approval holder must prepare and submit a revised application according to § 414.13 or § 414.15. The safety element approval holder must point out any part of the safety element approval or the associated application that would be changed or affected by a proposed modification. The FAA will review and make a determination on the revised application under the terms of this part.

§ 414.29 Safety element approval records.

The holder of a safety element approval must maintain all records necessary to verify that the holder's activities are consistent with the representations contained in the application for which the approval was issued for the duration of the safety element approval plus one year.

§ 414.31 Safety element approval renewal.

(a) Eligibility. A holder of a safety element approval may apply to renew it by sending the FAA a written application at least 90 days before the expiration date of the approval, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter.

(b) Application. (1) A safety element approval renewal application must meet all the requirements under § 414.13 or § 414.15.

(2) The application may incorporate by reference information provided as part of the application for the expiring safety element approval or any modification to that approval.

(3) Any proposed changes in the conduct of a safety element for which the FAA has issued a safety element approval must be described and must include any added information necessary to support the fitness of the proposed changes to meet the criteria upon which the FAA evaluated the safety element approval application.

(c) Review of application. The FAA conducts the reviews required under this part to determine whether the safety element approval may be renewed. We may incorporate by reference any findings that are part of the record for the expiring safety element approval.

(d) Grant of safety element approval renewal. If the FAA makes a favorable safety element approval determination, the FAA issues an order that amends the expiration date of the safety element approval or issues a new safety element approval. The FAA may impose added or revised terms and conditions necessary to protect public health and safety and the safety of property.

(e) Written notice. The FAA will provide written notice to the applicant of our determination on the safety element approval renewal request.

(f) Denial of a safety element approval renewal. If the FAA denies the renewal application, the applicant may correct any deficiency the FAA identified and request a reconsideration of the revised application. The applicant also has the right to appeal a denial as set forth in subpart D of this part.

§ 414.33 Safety element approval transfer.

(a) Only the FAA may approve a transfer of a safety element approval.

(b) Either the holder of a safety element approval or the prospective transferee may request a safety element approval transfer.

(c) Both the holder and prospective transferee must agree to the transfer.

(d) The person requesting the transfer must submit a safety element approval application according to § 414.13 or § 414.15, must meet the applicable requirements of this part, and may incorporate by reference relevant portions of the initial application.

(e) The FAA will approve a transfer of a safety element approval only after all the approvals and determinations required under this chapter for a safety element approval have been met. In conducting reviews and issuing approvals and determinations, the FAA may incorporate by reference any findings made part of the record to support the initial safety element approval determination. The FAA may modify the terms and conditions of a safety element approval to reflect any changes necessary because of a safety element approval transfer.

(f) The FAA will provide written notice to the person requesting the safety element approval transfer of our determination.

§ 414.35 Monitoring compliance with the terms and conditions of a safety element approval.

Each holder of a safety element approval must allow access by, and cooperate with, Federal officers or employees or other individuals authorized by the Associate Administrator to inspect manufacturing, production, testing, or assembly performed by a holder of a safety element approval or its contractor. The FAA may also inspect a safety element approval process or service, including training programs and personnel qualifications.

§ 414.37 Modification, suspension, or revocation of a safety element approval.

(a) The safety element approval holder. The safety element approval holder may submit an application to the FAA to modify the terms and conditions of the holder's safety element approval. The application must meet all the applicable requirements under this part. The FAA will review and make a determination on the application using the same procedures under this part applicable to an initial safety element approval application. If the FAA denies the request to modify a safety element approval, the holder may correct any deficiency the FAA identified and request reconsideration. The holder also has the right to appeal a denial as set forth in subpart D of this part.

(b) The FAA. If the FAA finds it is in the interest of public health and safety, safety of property, or if the safety element approval holder fails to comply with any applicable requirements of this part, any terms and conditions of the safety approval, or any other applicable requirement, the FAA may--

(1) Modify the terms and conditions of the safety element approval; or

(2) Suspend or revoke the safety element approval.

(c) Effective date. Unless otherwise stated by the FAA, any modification, suspension, or revocation of a safety element approval under paragraph (b) of this section--

(1) Takes effect immediately; and

(2) Continues in effect during any reconsideration or appeal of such action under this part.

(d) Notification and Right to Appeal. If the FAA determines it is necessary to modify, suspend, or revoke a safety element approval, we will notify the safety element approval holder in writing. If the holder disagrees with the FAA's determination, the holder may correct any deficiency the FAA identified and request a reconsideration of the determination. The applicant also has the right to appeal the determination as set forth in subpart D of this part.

§ 414.39 [Reserved]

§ 414.39 [Reserved]

Subpart D--Appeal Procedures

§ 414.41 Hearings in safety element approval actions.

(a) The FAA will give the safety element approval applicant or holder, as appropriate, written notice stating the reason for issuing a denial or for modifying, suspending, or revoking a safety element approval under this part.

Subpart D--Appeal Procedures

(b) A safety element approval applicant or holder is entitled to a determination on the record after an opportunity for a hearing.

§ 414.43 Submissions; oral presentations in safety element approval actions.

(a) Determinations in safety element approval actions under this part will be made on the basis of written submissions unless the administrative law judge, on petition or on his or her own initiative, determines that an oral presentation is required.

(b) Submissions must include a detailed exposition of the evidence or arguments supporting the petition.

(c) Petitions must be filed as soon as practicable, but in no event more than 30 days after issuance of decision or finding under § 414.37.

§ 414.45 Administrative law judge's recommended decision in safety element approval actions.

(a) The Associate Administrator, who will make the final decision on the matter at issue, will review the recommended decision of the administrative law judge. The Associate Administrator will make such final decision within 30 days of issuance of the recommended decision.

(b) The authority and responsibility to review and decide rests solely with the Associate Administrator and may not be delegated.

PART 415 [REMOVE AND RESERVE]

15. Remove and reserve part 415.

PART 417 [REMOVE AND RESERVE]

16. Remove and reserve part 417.

PART 420--LICENSE TO OPERATE A LAUNCH SITE

PART 420--LICENSE TO OPERATE A LAUNCH SITE

17. The authority citation for part 420 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

§ 420.5 [Amended]

18. Amend § 420.5 by removing the definitions for "Instantaneous impact point," "Launch site accident," and "Public." 19. Amend § 420.15 by revising paragraph (b) to read as follows:

§ 420.5 [Amended]

§ 420.15 Information requirements.

* * * * *

(b) Environmental. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a launch site license. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with issuing a launch site license.

(1) Environmental Impact Statement or Environmental Assessment. An applicant must--

(i) Prepare an Environmental Assessment with FAA oversight;

(ii) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or

(iii) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA.

(2) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale.

(3) Environmental information. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA. * * * * * 20. Revise § 420.51 to read as follows:

§ 420.51 Responsibilities--general.

A licensee must operate its launch site in accordance with the representations in its application. 21. Amend § 420.57 by revising paragraph (d) to read as follows:

§ 420.57 Notifications.

* * * * *

(d) At least 2 days prior to flight of a launch vehicle, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter, the licensee must notify local officials and all owners of land adjacent to the launch site of the flight schedule. 22. Revise § 420.59 to read as follows:

§ 420.59 Mishap plan.

(a) A licensee must submit a mishap response plan that meets the requirements of § 450.173 of this chapter.

(b) A launch site operator's mishap plan must also contain--

(1) Procedures for participating in an investigation of a launch mishap for launches launched from the launch site; and

(2) Require the licensee to cooperate with FAA or National Transportation Safety Board (NTSB) investigations of a mishap for launches launched from the launch site.

(c) Emergency response and investigation procedures developed in accordance with 29 CFR 1910.119 and 40 CFR part 68 will satisfy the requirements of § 450.173(d) and (e) to the extent that they include the elements required by § 450.173(d) and (e).

PART 431 [REMOVE AND RESERVE]

PART 431 [REMOVE AND RESERVE]

23. Remove and reserve part 431.

PART 433--LICENSE TO OPERATE A REENTRY SITE

24. The authority citation for part 433 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

25. Revise § 433.7 to read as follows:

§ 433.7 Environmental.

(a) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a reentry site license. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with issuing a license for a reentry site.

PART 433--LICENSE TO OPERATE A REENTRY SITE

(b) Environmental Impact Statement or Environmental Assessment. An applicant must--

(1) Prepare an Environmental Assessment with FAA oversight;

(2) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or

(3) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA.

(c) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale.

(d) Environmental information. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA.

§ 433.9 [Removed and Reserved]

§ 433.9 [Removed and Reserved]

26. Remove and reserve § 433.9.

PART 435 [REMOVED AND RESERVED]

27. Remove and reserve part 435.

PART 437--EXPERIMENTAL PERMITS

28. The authority citation for part 437 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

§ 437.3 [Amended]

§ 437.3 [Amended]

29. Amend § 437.3 by removing the definition for "Anomaly." 30. Amend § 437.21 by revising paragraphs (b) and (c) to read as follows:

§ 437.21 General.

* * * * *

(b) Other regulations--(1) Environmental--(i) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders to consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries.

(ii) Environmental Impact Statement or Environmental Assessment. An applicant must--

(A) Prepare an Environmental Assessment with FAA oversight;

(B) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or

(C) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA.

(iii) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale.

(iv) Information requirements. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA.

(2) Financial responsibility. An applicant must provide the information required by part 3 of appendix A of part 440 of this chapter for the FAA to conduct a maximum probable loss analysis.

(3) Human space flight. An applicant proposing launch or reentry with flight crew or a space flight participant on board a reusable suborbital rocket must demonstrate compliance with Sec. § 460.5, 460.7, 460.11, 460.13, 460.15, 460.17, 460.51 and 460.53 of this subchapter.

(c) Use of a safety element approval. If an applicant proposes to use any reusable suborbital rocket, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 of this chapter, the FAA will not reevaluate that safety element to the extent its use is within its approved envelope. As part of the application process, the FAA will evaluate the integration of that safety element into vehicle systems or operations. * * * * * 31. Revise § 437.41 to read as follows:

§ 437.41 Mishap plan.

An applicant must submit a mishap plan that meets the requirements of § 450.173 of this chapter. 32. Revise § 437.65 to read as follows:

§ 437.65 Collision avoidance analysis.

For a permitted flight with a planned maximum altitude greater than 150 kilometers, a permittee must obtain a collision avoidance analysis in accordance with § 450.169 of this chapter.

§ 437.75 [Removed and Reserved]

33. Remove and reserve § 437.75. 34. Amend § 437.89 by: a. Revising paragraph (a) introductory text; b. In paragraphs (a)(1) through (3), removing the comma at the end of the paragraphs and adding a semicolon in its place; and c. Revise paragraph (b).

§ 437.75 [Removed and Reserved]

The revisions read as follows:

§ 437.89 Pre-flight reporting.

(a) Not later than 30 days before each flight or series of flights conducted under an experimental permit, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter, a permittee must provide the FAA with the following information: * * * * *

(b) Not later than 15 days before each permitted flight planned to reach greater than 150 km altitude, unless the Administrator agrees to a different time frame in accordance with § 404.15, a of this chapter permittee must provide the FAA its planned trajectory for a collision avoidance analysis.

PART 440--FINANCIAL RESPONSIBILITY

PART 440--FINANCIAL RESPONSIBILITY

35. The authority citation for part 440 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

36. Amend § 440.3 by revising the definition for "Maximum probable loss" to read as follows:

§ 440.3 Definitions.

* * * * *

Maximum probable loss (MPL) means the greatest dollar amount of loss for bodily injury or property damage that is reasonably expected to result from a licensed or permitted activity:

(1) Losses to third parties, excluding Government personnel and other launch or reentry participants' employees involved in licensed or permitted activities and neighboring operations personnel, that are reasonably expected to result from a licensed or permitted activity are those that have a probability of occurrence of no less than one in ten million.

(2) Losses to Government property and Government personnel involved in licensed or permitted activities and neighboring operations personnel that are reasonably expected to result from licensed or permitted activities are those that have a probability of occurrence of no less than one in one hundred thousand. * * * * * 37. Amend § 440.15 by revising paragraphs (a)(1) through (4) to read as follows:

§ 440.15 Demonstration of compliance.

(a) * * *

(1) All reciprocal waiver of claims agreements required under § 440.17(c) must be submitted at least 30 days before the start of any licensed or permitted activity involving a customer, crew member, or space flight participant; unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter;

(2) Evidence of insurance must be submitted at least 30 days before commencement of any licensed launch or permitted activity, and for licensed reentry no less than 30 days, before commencement of launch activities involving the reentry licensee, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter;

(3) Evidence of financial responsibility in a form other than insurance, as provided under § 440.9(f) must be submitted at least 60 days before commencement of a licensed or permitted activity, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter; and

(4) Evidence of renewal of insurance or other form of financial responsibility must be submitted at least 30 days in advance of its expiration date, unless the Administrator agrees to a different time frame in accordance with § 404.15 of this chapter. * * * * * 38. Add part 450 to read as follows:

PART 450--LAUNCH AND REENTRY LICENSE REQUIREMENTS

PART 450--LAUNCH AND REENTRY LICENSE REQUIREMENTS

Sec. Subpart A--General Information 450.1 Applicability. 450.3 Scope of a vehicle operator license. 450.5 Issuance of a vehicle operator license. 450.7 Duration of a vehicle operator license. 450.9 Additional license terms and conditions. 450.11 Transfer of a vehicle operator license. 450.13 Rights not conferred by a vehicle operator license. Subpart B--Requirements to Obtain a Vehicle Operator License 450.31 General. 450.33 Incremental review and determinations. 450.35 Accepted means of compliance. 450.37 Equivalent level of safety. 450.39 Use of safety element approval. 450.41 Policy review and approval. 450.43 Payload review and determination. 450.45 Safety review and approval. 450.47 Environmental review. Subpart C--Safety Requirements

Public Safety Criteria

Public Safety Criteria

450.101 Public safety criteria.

System Safety Program

450.103 System safety program.

Preliminary Safety Assessment for Flight and Hazard Control Strategies

450.105 Preliminary safety assessment for flight. 450.107 Hazard control strategies.

Flight Hazard Analyses for Hardware and Software

Flight Hazard Analyses for Hardware and Software

450.109 Flight hazard analysis. 450.111 Computing systems and software.

Flight Safety Analyses

450.113 Flight safety analysis requirements--scope and applicability. 450.115 Flight safety analysis methods. 450.117 Trajectory analysis for normal flight. 450.119 Trajectory analysis for malfunction flight. 450.121 Debris analysis. 450.123 Flight safety limits analysis. 450.125 Gate analysis. 450.127 Data loss Flight time and planned safe flight state analyses.

Flight Safety Analyses

450.129 Time delay analysis. 450.131 Probability of failure analysis. 450.133 Flight hazard area analysis. 450.135 Debris risk analysis. 450.137 Far-field overpressure blast effects analysis. 450.139 Toxic hazards for flight. 450.141 Wind weighting for the flight of an unguided suborbital launch vehicle.

Prescribed Hazard Controls

Prescribed Hazard Controls

450.143 Safety-critical system design, test, and documentation. 450.145 Flight safety system. 450.147 Agreements. 450.149 Safety-critical personnel qualifications. 450.151 Work shift and rest requirements. 450.153 Radio frequency management. 450.155 Readiness. 450.157 Communications. 450.159 Preflight procedures. 450.161 Surveillance and publication of hazard areas. 450.163 Lightning hazard mitigation. 450.165 Flight safety rules. 450.167 Tracking. 450.169 Launch and reentry collision avoidance analysis requirements. 450.171 Safety at end of launch. 450.173 Mishap plan--reporting, response, and investigation requirements. 450.175 Test-induced damage. 450.177 Unique Policies, requirements, and practices.

Ground Safety

Ground Safety

450.179 Ground safety--general. 450.181 Coordination with a site operator. 450.183 Explosive site plan. 450.185 Ground hazard analysis. 450.187 Toxic hazards mitigation for ground operations. 450.189 Ground safety prescribed hazard controls. Subpart D--Terms and Conditions of a Vehicle Operator License. 450.201 Public safety responsibility. 450.203 Compliance with license. 450.205 Financial responsibility requirements. 450.207 Human Spaceflight Requirements. 450.209 Compliance monitoring. 450.211 Continuing accuracy of license application; application for modification of license. 450.213 Preflight reporting. 450.215 Post-flight reporting. 450.217 Registration of space objects. 450.219 Records. Appendix A to Part 450--Collision Analysis Worksheet

Authority: 51 U.S.C. 50901-50923.

Subpart A--General Information

Subpart A--General Information

§ 450.1 Applicability.

(a) General. This part prescribes requirements for obtaining and maintaining a license to launch, reenter, or both launch and reenter, a launch or reentry vehicle.

(b) Grandfathering. Except for Sec. § 450.169 and 450.101(a)(4) and (b)(4), this part does not apply to any launch or reentry that an operator elects to conduct pursuant to a license issued by the FAA or an application accepted by the FAA no later than [EFFECTIVE DATE OF FINAL RULE]. The Administrator will determine the applicability of this part to an application for a license modification submitted after [EFFECTIVE DATE OF FINAL RULE] on a case-by-case basis.

§ 450.3 Scope of a vehicle operator license.

(a) A vehicle operator license authorizes a licensee to conduct one or more launches or reentries using the same vehicle or family of vehicles. A vehicle operator license identifies the scope of authorization as defined in paragraphs (b) and (c) of this section or as agreed to by the Administrator.

(b) A vehicle operator license authorizes launch, which includes the flight of a launch vehicle and pre- and post-flight ground operations as follows:

(1) Launch begins when hazardous preflight ground operations commence at a U.S. launch site that pose a threat to the public. Unless a later point is agreed to by the Administrator, hazardous preflight ground operations commence when a launch vehicle or its major components arrive at a U.S. launch site.

(2) At a non-U.S. launch site, launch begins at ignition or at the first movement that initiates flight, whichever occurs earlier.

(3) Launch ends when any of the following events occur:

(i) For an orbital launch of a vehicle without a reentry of the vehicle, launch ends after the licensee's last exercise of control over its vehicle on orbit, after vehicle stage impact on Earth, after activities necessary to return the vehicle or stage to a safe condition on the ground after landing, or after activities necessary to return the site to a safe condition, whichever occurs later;

(ii) For an orbital launch of a vehicle with a reentry of the vehicle, launch ends after deployment of all payloads, upon completion of the vehicle's first steady-state orbit if there is no payload, or after activities necessary to return the site to a safe condition, whichever occurs later;

(iii) For a suborbital launch that includes a reentry, launch ends after reaching apogee; or

(iv) For a suborbital launch that does not include a reentry, launch ends after the vehicle or vehicle component impact on Earth, after activities necessary to return the vehicle or vehicle component to a safe condition on the ground after landing, or after activities necessary to return the site to a safe condition, whichever occurs later.

(c) A vehicle operator's license authorizes reentry, which includes activities conducted in Earth orbit or outer space to determine reentry readiness and that are critical to ensuring public health and safety and the safety of property during reentry flight. Reentry also includes activities necessary to return the reentry vehicle to a safe condition on the ground after landing.

§ 450.5 Issuance of a vehicle operator license.

(a) The FAA issues a vehicle operator license to an applicant who has obtained all approvals and determinations required under this part for a license.

(b) A vehicle operator license authorizes a licensee to conduct launches or reentries, in accordance with the representations contained in the licensee's application, with subparts C and D of this part, and subject to the licensee's compliance with terms and conditions contained in license orders accompanying the license, including financial responsibility requirements.

§ 450.7 Duration of a vehicle operator license.

A vehicle operator license is valid for the period of time determined by the Administrator as necessary to conduct the licensed activity but may not exceed 5 years from the issuance date.

§ 450.9 Additional license terms and conditions.

The FAA may modify a vehicle operator license at any time by modifying or adding license terms and conditions to ensure compliance with the Act (as defined in § 401.5 of this chapter) and its implementing regulations in this chapter.

§ 450.11 Transfer of a vehicle operator license.

(a) Only the FAA may transfer a vehicle operator license.

(b) An applicant for transfer of a vehicle operator license must submit a license application in accordance with part 413 of this chapter and must meet the requirements of part 450 of this chapter. The FAA will transfer a license to an applicant that has obtained all of the approvals and determinations required under this part for a license. In conducting its reviews and issuing approvals and determinations, the FAA may incorporate by reference any findings made part of the record to support the initial licensing determination. The FAA may modify a license to reflect any changes necessary as a result of a license transfer.

§ 450.13 Rights not conferred by a vehicle operator license.

Issuance of a vehicle operator license does not relieve a licensee of its obligation to comply with all applicable requirements of law or regulation that may apply to its activities, nor does issuance confer any proprietary, property or exclusive right in the use of any Federal launch range or related facilities, airspace, or outer space.

Subpart B--Requirements to Obtain a Vehicle Operator License

Subpart B--Requirements to Obtain a Vehicle Operator License

§ 450.31 General.

(a) To obtain a vehicle operator license, an applicant must--

(1) Submit a license application in accordance with the procedures in part 413 of this chapter;

(2) Obtain a policy approval from the Administrator in accordance with § 450.41;

(3) Obtain a favorable payload determination from the Administrator in accordance with § 450.43;

(4) Obtain a safety approval from the Administrator in accordance with § 450.45;

(5) Satisfy the environmental review requirements of § 450.47; and

(6) Provide the information required by appendix A of part 440 of this chapter for the Administrator to conduct a maximum probable loss analysis for the applicable licensed operation.

(b) An applicant may apply for the approvals and determinations in paragraphs (a)(2) through (6) of this section separately or all together in one complete application, using the application procedures contained in part 413 of this chapter.

(c) An applicant may also apply for a safety approval in an incremental manner, in accordance with § 450.33.

(d) An applicant may reference materials previously provided as part of a license application in order to meet the application requirements of this part.

§ 450.33 Incremental review and determinations.

An applicant may submit its application for a safety review incrementally using an approach approved by the Administrator.

(a) An applicant must identify to the Administrator, prior to submitting an application, whether it will submit an incremental application for any approval or determination.

(b) An applicant using an incremental approach must have the approach approved by the Administrator prior to submitting an application.

(c) The Administrator may make incremental determinations as part of this review process.

§ 450.35 Accepted means of compliance.

(a) An applicant must demonstrate compliance with applicable sections of this part using a means of compliance accepted by the Administrator. These applicable sections specify that only an accepted means of compliance can be used to demonstrate compliance.

(b) The FAA will provide public notice of each means of compliance that the Administrator has accepted.

(c) An applicant requesting acceptance of an alternative means of compliance must submit the alternative means of compliance to the FAA in a form and manner acceptable to the Administrator.

§ 450.37 Equivalent level of safety.

(a) An applicant must demonstrate compliance with each requirement of this part, unless the applicant clearly and convincingly demonstrates that an alternative approach provides an equivalent level of safety to the requirement of this part.

(b) Paragraph (a) of this section does not apply to the requirements of § 450.101.

§ 450.39 Use of safety element approval.

If an applicant proposes to use any vehicle, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 of this chapter, the FAA will not reevaluate that safety element during a license application evaluation to the extent its use is within its approved envelope.

§ 450.41 Policy review and approval.

(a) General. The FAA issues a policy approval to an applicant unless the FAA determines that a proposed launch or reentry would jeopardize U.S. national security or foreign policy interests, or international obligations of the United States.

(b) Interagency consultation. (1) The FAA consults with the Department of Defense to determine whether a license application presents any issues affecting U.S. national security.

(2) The FAA consults with the Department of State to determine whether a license application presents any issues affecting U.S. foreign policy interests or international obligations.

(3) The FAA consults with other Federal agencies, including the National Aeronautics and Space Administration, authorized to address issues identified under paragraph (a) of this section, associated with an applicant's proposal.

(c) Issues during policy review. The FAA will advise an applicant, in writing, of any issue raised during a policy review that would impede issuance of a policy approval. The applicant may respond, in writing, or amend its license application as required by § 413.17 of this chapter.

(d) Denial of policy approval. The FAA notifies an applicant, in writing, if it has denied policy approval for a license application. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with § 413.21 of this chapter.

(e) Application requirements for policy review. In its license application, an applicant must--

(1) Identify the model, type, and configuration of any vehicle proposed for launch or reentry by the applicant;

(2) Describe the vehicle by characteristics that include individual stages, their dimensions, type and amounts of all propellants, and maximum thrust;

(3) Identify foreign ownership of the applicant as follows:

(i) For a sole proprietorship or partnership, identify all foreign ownership;

(ii) For a corporation, identify any foreign ownership interests of 10 percent or more; and

(iii) For a joint venture, association, or other entity, identify any participating foreign entities; and

(4) Identify proposed vehicle flight profile, including:

(i) Launch or reentry site, including any contingency abort locations;

(ii) Flight azimuths, trajectories, and associated ground tracks and instantaneous impact points for the duration of the licensed activity, including any contingency abort profiles;

(iii) Sequence of planned events or maneuvers during flight;

(iv) Normal impact or landing areas for all mission hardware; and

(v) For each orbital mission, the range of intermediate and final orbits of each vehicle upper stage and their estimated orbital lifetimes.

§ 450.43 Payload review and determination.

(a) General. The FAA issues a favorable payload determination for a launch or reentry to a license applicant or payload owner or operator if--

(1) The applicant, payload owner, or payload operator has obtained all required licenses, authorizations, and permits; and

(2) Its launch or reentry would not jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States.

(b) Relationship to other executive agencies. The FAA does not make a determination under paragraph (a)(2) of this section for--

(1) Those aspects of payloads that are subject to regulation by the Federal Communications Commission or the Department of Commerce; or

(2) Payloads owned or operated by the U.S. Government.

(c) Classes of payloads. The FAA may review and issue findings regarding a proposed class of payload, including communications, remote sensing, or navigation. However, prior to a launch or reentry, each payload is subject to verification by the FAA that its launch or reentry would not jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States.

(d) Payload owner or payload operator may apply. In addition to a launch or reentry operator, a payload owner or payload operator may request a payload review and determination.

(e) Interagency consultation. The FAA consults with other agencies as follows:

(1) The Department of Defense to determine whether launch or reentry of a proposed payload or payload class would present any issues affecting U.S. national security;

(2) The Department of State to determine whether launch or reentry of a proposed payload or payload class would present any issues affecting U.S. foreign policy interests or international obligations; or

(3) Other Federal agencies, including the National Aeronautics and Space Administration, authorized to address issues of public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States, associated with the launch or reentry of a proposed payload or payload class.

(f) Issues during payload review. The FAA will advise a person requesting a payload determination, in writing, of any issue raised during a payload review that would impede issuance of a license to launch or reenter that payload or payload class. The person requesting payload review may respond, in writing, or amend its application as required by § 413.17 of this chapter.

(g) Denial of a payload determination. The FAA notifies an applicant, in writing, if it has denied a favorable payload determination. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with § 413.21 of this chapter.

(h) Incorporation of payload determination in license application. A favorable payload determination issued for a payload or class of payload may be included by a license applicant as part of its application. However, any change in information provided under paragraph (i) of this section must be reported in accordance with § 413.17 of this chapter. The FAA determines whether a favorable payload determination remains valid in light of reported changes and may conduct an additional payload review.

(i) Application requirements. A person requesting review of a particular payload or payload class must identify the following:

(1) For launch of a payload:

(i) Payload name or class, and function;

(ii) Description, including physical dimensions, weight, composition, and any hosted payloads;

(iii) Payload owner and payload operator, if different from the person requesting payload review and determination,

(iv) Any foreign ownership of the payload or payload operator, as specified in § 450.41(e)(3);

(v) Hazardous materials as defined in § 401.5 of this chapter, radioactive materials, and the amounts of each;

(vi) Explosive potential of payload materials, alone and in combination with other materials found on the payload;

(vii) For orbital launches, parameters for parking, transfer and final orbits, and approximate transit times to final orbit;

(viii) Delivery point in flight at which the payload will no longer be under the licensee's control;

(ix) Intended operations during the lifetime of the payload, including anticipated life span and any planned disposal;

(x) Any encryption associated with data storage on the payload and transmissions to or from the payload; and

(xi) Any other information necessary to make a determination based on public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States; or

(2) For reentry of a payload:

(i) Payload name or class and function;

(ii) Physical characteristics, dimensions, and weight of the payload;

(iii) Payload owner and payload operator, if different from the person requesting the payload review and determination;

(iv) Type, amount, and container of hazardous materials and radioactive materials in the payload;

(v) Explosive potential of payload materials, alone and in combination with other materials found on the payload or reentry vehicle during reentry; and

(vi) Designated reentry site.

§ 450.45 Safety review and approval.

(a) General. The FAA issues a safety approval to an applicant if it determines that an applicant can conduct launch or reentry without jeopardizing public health and safety and safety of property. A license applicant must satisfy the application requirements in this section and subpart C of this part.

(b) Services or property provided by a Federal launch range. The FAA will accept any safety-related launch or reentry service or property provided by a Federal launch range or other Federal entity by contract, as long as the FAA determines that the launch or reentry services or property provided satisfy this part.

(c) Issues during safety review. The FAA will advise an applicant, in writing, of any issues raised during a safety review that would impede issuance of a safety approval. The applicant may respond, in writing, or amend its license application as required by § 413.17 of this chapter.

(d) Denial of a safety approval. The FAA notifies an applicant, in writing, if it has denied a safety approval for a license application. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with § 413.21 of this chapter.

(e) Application requirements. An applicant must submit the application requirements information in subpart C of this part, as well as the following:

(1) General. An application must--

(i) Contain a glossary of unique terms and acronyms used in alphabetical order;

(ii) Contain a listing of all referenced material;

(iii) Use equations and mathematical relationships derived from or referenced to a recognized standard or text, and define all algebraic parameters;

(iv) Include the units of all numerical values provided; and

(v) Include a legend or key that identifies all symbols used for any schematic diagrams.

(2) Site description. An applicant must identify the proposed launch or reentry site, including contingency abort locations, and submit the following:

(i) Boundaries of the site;

(ii) Launch or landing point locations, including latitude and longitude;

(iii) Identity of any site operator; and

(iv) Identity of any facilities at the site that will be used for pre- or post-flight ground operations.

(3) Vehicle description. An applicant must submit the following:

(i) A written description of the vehicle or family of vehicles, including structural, thermal, pneumatic, propulsion, electrical, and avionics and guidance systems used in each vehicle, and all propellants. The description must include a table specifying the type and quantities of all hazardous materials on each vehicle and must include propellants, explosives, and toxic materials; and

(ii) A drawing of each vehicle that identifies:

(A) Each stage, including strap-on motors;

(B) Physical dimensions and weight;

(C) Location of all safety-critical systems;

(D) Location of all major vehicle control systems, propulsion systems, pressure vessels, and any other hardware that contains potential hazardous energy or hazardous material; and

(E) For an unguided suborbital launch vehicle, the location of the rocket's center of pressure in relation to its center of gravity for the entire flight profile.

(4) Mission schedule. An applicant must submit a generic launch or reentry processing schedule that identifies any readiness activities, such as reviews and rehearsals, and each safety-critical preflight operation to be conducted. The mission schedule must also identify day of flight activities.

(5) Human space flight. For a proposed launch or reentry with a human being on board a vehicle, an applicant must demonstrate compliance with Sec. § 460.5, 460.7, 460.11, 460.13, 460.15, 460.17, 460.51, and 460.53 of this chapter.

Continue reading ↓ 1080 of 1213 passages shown