Radar Vectors
FAA Order Current Issued Oct 1, 2025 AVS-60 449 pages Copy saved Nov 18, 2026

Order 8100.15C Organization Designation Authorization Procedures

This order establishes the instructions and procedures for Federal Aviation Administration (FAA) personnel in evaluating applications submitted for Organization Designation Authorization (ODA) under the requirements set forth in Subpart D of Part 183 of Title 14 of the Code of Federal Regulations. It also establishes the instructions and procedures for FAA personnel conducting oversight of ODA holders granted under this subpart, and for such holders.

Official source ↗ Open PDF

Text read by OCR from a scanned file (1 of 449 pages). Check the original, as some words may be misread.

Distribution: Electronic Only Initiated By: AVS-60

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

National Policy

ORDER 8100.15C

Effective Date:

SUBJ: Organization Designation Authorization Procedures

This order establishes the instructions and procedures for Federal Aviation Administration (FAA) personnel in evaluating applications submitted for Organization Designation Authorization (ODA) under the requirements set forth in Subpart D of Part 183 of Title 14 of the Code of Federal Regulations. It also establishes the instructions and procedures for FAA personnel conducting oversight of ODA holders granted under this subpart, and for such holders.

Tina Amereihn Acting Associate Administrator for Aviation Safety, AVS-1

10/01/2025

Digitally signed by Tina Amereihn Date: 2025.10.01 07:56:06 -04'00'

Table of Contents

ii

Table of Contents

PARAGRAPH PAGE

Table of Contents … ii List of Figures … v List of Tables … vi

Chapter 1. Introduction … 1-1

1-1. Purpose of This Order … 1-1 1-2. Audience … 1-1 1-3. Where You Can Find This Order … 1-1 1-4. What This Order Cancels … 1-1 1-5. Explanation of Policy Changes … 1-2 1-6. Effective Date … 1-7 1-7. General … 1-7 1-8. Related Publications … 1-7

Chapter 2. ODA Program Overview … 2-1

2-1. FAA Appointment and Oversight of ODAs … 2-1 2-2. Reducing Designees … 2-1 2-3. Definitions of ODA Holder and ODA Unit … 2-1 2-4. ODA Holder’s Commitment … 2-2 2-5. Types of ODAs … 2-2 2-6. Authority and Functions … 2-4 2-7. Multiple ODA Types … 2-7 2-8. Organization Management Team (OMT) … 2-7 2-9. Certification Activity … 2-8

Chapter 3. ODA Applicant and ODA Holder Responsibilities … 3-1

Section 1. Qualifications and Eligibility … 3-1

3-1. ODA Holder Location … 3-1 3-2. ODA Holder Qualifications … 3-1 3-3. ODA Staff Qualifications … 3-2 3-4. Eligibility … 3-6 Section 2. Procedures Manual Content … 3-11

3-5. Procedures Manual Content … 3-11 3-6. Authorized Functions Procedures … 3-41 Section 3. Application, Selection, and Appointment … 3-76

3-7. Preapplication Communication … 3-76 3-8. Application … 3-77 3-9. Selection Process … 3-78 3-10. Application Denial and Appeal Process … 3-79 3-11. Appointment … 3-79 3-12. Duration of Appointments … 3-79 Section 4. ODA Holder Responsibilities and Continued Eligibility … 3-80

3-13. Continued Eligibility … 3-80 3-14. Procedures Manual Availability and Maintenance … 3-80 3-15. Training … 3-81 3-16. Selection of ODA UMs and ODA Administrators … 3-83 3-17. Work Activity Reports … 3-87 3-18. Activity Outside the United States … 3-87 3-19. UMs at Suppliers … 3-87

iii

3-20. Records … 3-87 3-21. ODA Renewal … 3-96 3-22. Suspension and Termination … 3-96 3-23. Expansion of Authority … 3-99 Section 5. Continuous Improvement … 3-100

3-24. Continuing Requirements … 3-100 3-25. Suspected Unapproved Parts … 3-101 3-26. Internal Audit Program … 3-101 3-27. Corrective Action … 3-103

Chapter 4. FAA Roles and Responsibilities for ODA Oversight … 4-1

Section 1. Application, Selection, and Appointment … 4-1

4-1. Preapplication … 4-1 4-2. Application … 4-3 4-3. Selection Process … 4-3 4-4. Application Denial and Appeal Process … 4-6 4-5. Appointment … 4-8 Section 2. Organization Management … 4-9

4-6. Oversight Personnel Roles and Responsibilities … 4-9 4-7. Communications and Interaction—OMT/ODA Holder … 4-14 4-8. Defining and Understanding the Authority and Limitations of the Organization … 4-16 4-9. Approving the Organization’s Procedures and Procedures Manual Changes … 4-17 4-10. Ensuring ODA Administrators and UMs Are Approved … 4-18 4-11. Managing ODA Activity … 4-19 4-12. Providing Guidance … 4-43 4-13. Continuous Improvement Monitoring … 4-43 4-14. Designee Management System … 4-47 4-15. Maintaining Designation Documentation … 4-48 Section 3. Organization Surveillance … 4-50

4-16. Systems Approach … 4-50 4-17. Surveillance and Risk Considerations … 4-52 4-18. Conducting Surveillance Activities … 4-55 4-19. Required FAA Involvement in Corrective Action … 4-63 4-20. ODA UM Performance Problems … 4-63 Section 4. Organization Reauthorizations, Suspensions, and Terminations … 4-64

4-21. ODA Renewal … 4-64 4-22. Suspension and Termination of an ODA … 4-65

Chapter 5. ODA Types, Authorized Functions, and Program Requirements … 5-1

Section 1. Type Certification ODA (TC ODA) … 5-1

5-1. Functions … 5-1 5-2. Limitations … 5-4 5-3. TC Programs … 5-5 5-4. Approval of Major Alteration or Major Repair Data … 5-16 5-5. Approval of AMOCs to ADs and AD-Mandated Repairs … 5-17 5-6. Global AMOCs for Revisions to Service Bulletins (SB) … 5-21 5-7. Airworthiness Certification … 5-21 5-8. Special Considerations—MCDA … 5-22 5-9. Data Approvals Supporting Other Certification Programs … 5-22 Section 2. Production Certification ODA (PC ODA) … 5-23

5-10. Functions … 5-23 5-11. Limitations … 5-25 5-12. PC Programs and PLR Changes … 5-25 5-13. Conformity Inspections … 5-26 5-14. Airworthiness Certification … 5-27

iv

5-15. Airworthiness Approvals … 5-28 Section 3. Technical Standard Order Authorization Holder ODA (TSOA ODA) … 5-28

5-16. Functions … 5-28 5-17. Limitations … 5-29 5-18. Conformity Inspections … 5-30 5-19. Airworthiness Approvals … 5-30 Section 4. Supplemental Type Certification ODA (STC ODA) … 5-30

5-20. Functions … 5-30 5-21. Limitations … 5-33 5-22. Alteration Locations … 5-34 5-23. STC Programs … 5-38 5-24. Data Approvals and Conformity Inspections Supporting Other Programs … 5-48 5-25. Approval of Major Alteration or Major Repair Data … 5-48 5-26. Airworthiness Certification … 5-49 5-27. Special Considerations—MCDA … 5-50 Section 5. Major Repair, Alteration, and Airworthiness ODA (MRA ODA) … 5-51

5-28. Functions … 5-51 5-29. Limitations … 5-54 5-30. Approval of Major Alteration or Major Repair Data … 5-54 5-31. Airworthiness Certification … 5-56 5-32. Off-Site ODA Activities … 5-56 5-33. Perform Aging Aircraft Inspections and Records Reviews … 5-57 Section 6. Parts Manufacturer Approval ODA (PMA ODA) … 5-58

5-34. Functions … 5-58 5-35. Limitations … 5-61 5-36. PMA Procedures … 5-62 5-37. Other Approval Functions … 5-70 5-38. Airworthiness Approvals … 5-71 5-39. Conformity Determinations … 5-71 Section 7. Air Operator ODA (AO ODA) … 5-72

5-40. Functions … 5-72 5-41. Limitations … 5-74 5-42. AO Certification Programs … 5-75 Section 8. Airmen Certification ODA (AC ODA) … 5-76

5-43. Functions … 5-76 5-44. Limitations … 5-80 5-45. Airmen Certification … 5-80

Appendix A. Sample Forms and Letters … A-1

Appendix A Table of Contents … A-1

Appendix B. Sample ODA Procedures Manual … B-1

Appendix C. Delegated Organization Surveillance … C-1

Section 1.0 Procedures Manual Evaluation … C-5 Section 2.0 System Compliance Audit … C-13 Section 3.0 Authorized Function Performance Assessment … C-23

Appendix D. Related FAA Publications … D-1

Appendix E. Definitions … E-1

Appendix F. Acronyms … F-1

Appendix G. Administrative Information … G-1

List of Figures

v

List of Figures

FIGURE PAGE Figure 3-4.1. Unit Member (UM) Selection Process … 3-84 Figure A-1. Sample ODA Application Checklist … A-2 Figure A-2. Sample ODA Letter of Designation … A-3 Figure A-3. Sample ODA Denial Letter … A-4 Figure A-4. Sample FAA Form 8100-9 Used for STC ODA Data Approval … A-5 Figure A-5. Sample FAA Form 8100-9 Used for TC ODA Data Approval … A-6 Figure A-6. Sample FAA Form 8100-9 Used for TC ODA Approval in Support of STC … A-7 Figure A-7. Sample FAA Form 8100-9 Used for TC ODA Repair Data Approval … A-8 Figure A-8. Sample FAA Form 8100-9 Used for MRA ODA Compliance Finding … A-9 Figure A-9. Sample Manufacturing Work Activity Report … A-10 Figure A-10. Memorandum of Understanding (MOU) … A-11 Figure A-11. Sample ODA Termination Letter … A-14 Figure A-12. Sample ODA Suspension Letter … A-16 Figure A-13. System Compliance Surveillance Index … A-17 Figure A-14. Authorized Function Performance Surveillance Index … A-23 Figure A-15. Procedures Manual Content Audit Form … A-28 Figure A-16. System Compliance Audit Form … A-35 Figure A-17. Authorized Function Performance Assessment Form … A-42 Figure A-18. ODA Oversight Finding Record … A-52 Figure A-19. Opportunity for Improvement Record (OFIR) … A-55

List of Tables

vi

List of Tables

TABLE PAGE

Table 2-1.1. Available Engineering Functions per ODA Type … 2-4 Table 2-1.2. Available Manufacturing Functions per ODA Type … 2-5 Table 2-1.3. Available Flight Standards (Including Aircraft Evaluation Division (AED))

Functions per ODA Type … 2-6 Table 2-1.4. Available Airmen Certification Functions per CFR Part … 2-7 Table 3-3.1. Coordinating Offices for Preapplication … 3-77 Table 4-1.1. Coordinating Offices … 4-3 Table 5-1.1. TC ODA Functions … 5-1 Table 5-2.1. PC ODA Functions … 5-23 Table 5-3.1. TSOA ODA Functions … 5-29 Table 5-4.1. STC ODA Functions … 5-31 Table 5-5.1. MRA ODA Functions … 5-52 Table 5-6.1. PMA ODA Functions … 5-59 Table 5-7.1. AO ODA Functions … 5-73 Table 5-8.1. AC ODA Functions … 5-77

1-4. What This Order Cancels. › g. AIR-100-17-160-DM09.

Chapter 1. Introduction

1-1. Purpose of This Order. This order outlines the administration of the Federal Aviation Administration’s (FAA) Organization Designation Authorization (ODA) program under the regulations specified in 14 CFR Part 183 subpart D. Under this program, the FAA can delegate certain types of authority to organizations. This order addresses how FAA personnel evaluate, appoint, and oversee organizations in the ODA program. It also provides guidance to current and prospective ODA holders on application, procedures manual contents, and roles and responsibilities.

1-2. Audience. The FAA wrote this order for Aviation Safety (AVS) personnel in Aircraft Certification Service (AIR) and Flight Standards Service (FS) who evaluate, appoint, and oversee delegated organizations. The FAA also wrote this order for organizations granted an ODA to act on the FAA’s behalf.

1-3. Where You Can Find This Order. You can find this order on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices. This order is available to the public at http://www.faa.gov/regulations_policies/orders_notices. This order is also available on the Dynamic Regulatory System website at https://drs.faa.gov. 1-4. What This Order Cancels. Revision B of this order, issued May 16, 2013, is canceled 90 days after the effective date of revision C specified in paragraph 1-6 of this order. In addition, this revision cancels the following policy, deviation, and general memos due to their incorporation into this revision of policy:

a. AIR100-15-160-PM19. Subject: Guidance on Organization Designation Authorization (ODA) Oversight and Minimum Oversight Requirements for Organization Management Team (OMT) Members. Issued: 12/21/2015.

b. AIR100-16-160-DM05. Subject: Deviation to FAA Order 8100.15B (for Electrical Wiring Interconnection System (EWIS) ICA). Issued: 03/21/2016.

c. AIR100-16-160-GM06. Subject: Agreements for Sharing Resources Needed for Organization Designation Authorization (ODA) Supervision. Issued: 03/22/2016.

d. AIR100-16-160-PM06. Subject: Guidance on Actions to Take in Response to Organization Designation Authorization (ODA) Self-Audits. Issued: 08/25/2016.

e. AIR100-16-160-PM07. Subject: Guidance on the Level of Sampling Required for Organization Designation Authorization (ODA) Supervision. Issued: 08/25/2016.

f. AIR100-16-160-PM11. Subject: Guidance on Data that Should be Considered When Conducting ODA Oversight. Issued: 09/21/2016.

g. AIR-100-17-160-DM09. Subject: Deviation to FAA Order 8100.15B Requirements for use of FAA Forms. Issued: 03/29/2017.

1-5. Explanation of Policy Changes. › c. The definition of the Organization Management Team (OMT) is added to…

h. AIR100-17-160-PM04. Subject: Guidance on Organization Designation Authorization (ODA), Organization Management Team (OMT) Membership. Issued: 05/24/2017.

i. AIR600-17-6FO-PM04. Subject: Guidance on 14 CFR Part 21 No Acoustical Change Determinations by Organization Designation Authorization (ODA) Holders. Issued: 02/06/2018.

j. AVS-2021-PM01. Subject: FAA Approval of Organization Designation Authorization (ODA) Unit Member (UM) Selections Made by Type Certification (TC) ODA Holders. Issued: 10/15/2021.

k. AVS-2021-PM02. Subject: FAA Assignment of Advisors for Organization Designation Authorization (ODA) Engineering and Flight Test Unit Members (UM) at Boeing, General Electric, and Pratt & Whitney. Issued: 10/15/2021.

l. AIR600-21-630-DM04. Subject: Deviation to FAA Order 8100.15B, Organization Designation Authorization Procedures, Paragraph 11-7.n, removing restrictions on Supplemental Type Certificate (STC) Organization Designation Authorization (ODA) holders amending Supplemental Type Certificates. Issued: 04/08/2021.

m. AVS60-FY23-PM01. Subject: Transition of Organization Designation Authorization (ODA) Records Management from the Designee Information Network (DIN) to the Designee Management System (DMS). Issued: 03/22/2023.

n. AVS60-FY23-DM02. Subject: Deviation to FAA Order 8100.15B, Organization Designation Authorization Procedures, Lead Managing Office, and Organization Management Team (OMT) Lead Requirements to Support Aircraft Certification Service (AIR) Organizational Changes. Issued: 03/23/2023.

o. AVS60-FY24-PM04. Subject: ODA Policy to be Used in Lieu of FAA Order 8100.15B, Organization Designation Authorization Procedures, References to Cancelled FAA Order 8100.8, Designee Management Handbook. Issued: 4/30/2024

p. AVS60-FY25-PM06. Recording ODA unit member (UM) continued poor performance, misconduct, lack of care or judgment, or lack of integrity, in the Designee Management System (DMS). Issued: 3/26/2025.

1-5. Explanation of Policy Changes. This revision incorporates the following changes:

a. Reorganization of Order 8100.15 content.

b. Separates the function code table into distinct roles, e.g., Engineering, Manufacturing, and FS. See Tables 2-1.1 through 2-1.4.

c. Adds the definition of the Organization Management Team (OMT) to Chapter 2, ODA Program Overview. See paragraph 2-8.

d. Includes guidance on the use of ODA holder capability on FAA standard certification projects. See paragraph 2-9c(3).

1-5. Explanation of Policy Changes. › r. Parts Manufacturer Approval (PMA) test and computation procedures…

e. Removes Airman Knowledge Testing (AKT) as an ODA type.

f. Adds Airmen Certification (AC) as an ODA type.

g. Adds and clarifies the electrical wiring interconnection system (EWIS) instructions for continued airworthiness (ICA) function code. See Table 2-1.1, Available Engineering Functions per ODA Type, and paragraphs 5-1 and 5-20.

h. Moves the eligibility requirements for each ODA type into paragraph 3-4.

i. Moves all procedures manual requirements into Chapter 3, ODA Applicant and ODA Holder Responsibilities, Section 2, Procedures Manual Content, including procedures for the authorized functions per each ODA type.

j. Aligns the order of the procedures manual sections with the sample manual and audit criteria. See paragraph 3-5; Appendix B, Sample ODA Procedures Manual, of this order; and Appendix C, Delegated Organization Surveillance, Section 1.0, Procedures Manual Evaluation, and Section 2.0, System Compliance Audit, of this order.

k. Defines new procedures manual content for the internal audit program. See subparagraph 3-5l.

l. Adds reference to FAA Order 8110.37, Designated Engineering Representative (DER) Handbook. See subparagraph 3-5r.

3-5t. m. Defines new procedures manual content for corrective action. See subparagraph

n. Updates the ODA facilities requirements for Appendix C, ODA Facilities, in the procedures manual. See subparagraph 3-5w(3).

o. Moves the certification plan guidance from Appendix D of Order 8100.15B to the main body of the order. See subparagraph 3-5w(6).

p. Adds the expectation that compliance determinations procedures ensure the limitations of Order 8110.37 and any applicable policy are met. See subparagraphs 3-6a(7), 3-6a(24)(e), 3-6d(3)(a), 3-6d(18), 3-6e(1)(g), 3-6f(1)(b), and 3-6f(6).

q. Adds instructions and procedures for aging airplane inspections. See subparagraph 3-6e(3).

r. Updates Parts Manufacturer Approval (PMA) test and computation procedures to be consistent with STC procedures. See subparagraphs 3-6f(1)(a) and (c).

1-5. Explanation of Policy Changes. › gg.

s. Updates theProgram Notification Letter (PNL) instructions and procedures for PMA approvals based on licensing agreement or STC. See subparagraph 3-6f(2)(a).

t. Identifies the FAA offices that prospective ODA applicants must coordinate with prior to submitting the application. Revised Table 3-3.1, Coordinating Offices for Preapplication.

u. Provides guidance to the prospective ODA applicant on what to do if the applicant seeks multiple ODA types or ODA types involving multiple offices. See subparagraph 3-7b.

v. Updates procedures and expectations for FAA equivalent training. See subparagraph 3-15c(2).

w. The unit member (UM) appointment process includes the updated requirement for OMT approval. See paragraph 3-16.

3-17c. x. Adds STC ODA holders to design change activity reports. See subparagraph

y. Consolidates all records information into paragraph 3-20.

z. Adds a new category of continuous improvement. See Chapter 3, Section 5, Continuous Improvement.

aa. Introduces new instructions and procedures for the expansion of authority of existing ODA holders. See paragraphs 3-23 and 4-8b.

bb. Defines new instructions and procedures for the internal audit program. See paragraph 3-26.

cc. Defines new instructions and procedures are defined for corrective action. See paragraph 3- 26.

dd. Clarifies the appointment responsibilities of the FAA when the application involves multiple ODA types or an ODA type which involves multiple offices. See subparagraph 4-1b.

ee. Updates and defines how the FAA establishes the managing offices and OMT at ODA appointment. Adds guidance for new and existing organizations, as well as determining the OMT lead. See subparagraph 4-5a.

ff. Defines the oversight personnel roles and responsibilities. See paragraph 4-6.

gg. Consolidates how the FAA manages ODA activities and programs. This includes all ODA types. See paragraph 4-11.

1-5. Explanation of Policy Changes. › ww.

hh. Updates the response requirements for TC, STC, and PMA projects. See paragraph 4-11.

ii. Incorporates instructions and procedures for the OMT on how to review and assess the ODA internal audit reports or information. See subparagraph 4-13b.

jj. Defines the systems approach. See paragraph 4-16.

kk. Adds a risk model to define a risk based surveillance window and minimum surveillance activities. See paragraph 4-17.

ll. Updates planning and scheduling to account for the minimum surveillance activities required by the referenced Quality Management System (QMS) process. See subparagraph 4-18a.

mm. Adds guidance on surveillance sampling. See subparagraph 4-18b.

nn. Adds new surveillance records. See paragraph 4-18 and Appendix A, Sample Forms and Letters, of this order.

oo. Updates policy on prototype installation locations. See subparagraphs 3-5w(3), 5-3b, and 5-22.

pp. Adds paragraph 5-33 to address aging aircraft inspections and records reviews.

qq. Standardizes the PNL language for PMA programs. See subparagraphs 5-36a(1) and 5-36b(1).

rr. Incorporates applicable policy and guidance from issued policy memos which refer to Order 8100.15.

ss. Updates and aligns No-PNL instructions and procedures for TC, STC, and PMA projects. Refer to paragraphs 3-6, 4-11, and 5-3.

tt. Incorporates policy associated with the Aircraft Certification, Safety, and Accountability Act related to FAA approval of unit members (4-10b), assignment of FAA advisors (4-6b), and prohibition on interference (3-5v, 4-13c).

uu. Removes the sample PMA supplements from Appendix A and updates the process to obtain PMA supplement templates. See paragraphs 5-36a(9)(c) and 5-36b(5)(d).

vv. Changes Type Inspection Authorizations (TIA) prior to flight test, and their revisions, from optional to mandatory. See subparagraphs 3-6a(13) and 3-6d(9).

ww. Removes all references to FAA Order 8100.8, Designee Management Handbook, and clarified references to FAA Order 8000.95, Designee Management Policy, for ODA staff qualifications. See paragraph 3-3.

1-5. Explanation of Policy Changes. › ooo.

xx. Adds references to FAA Order 8120.16, Suspected Unapproved Parts Program. See subparagraphs 3-25 and 4-19c.

yy. Adds verbiage to address instances where the engineer creating the compliance data as a showing of compliance and then makes any finding associated with the same substantiation data as a UM. See subparagraphs 3-5l(1)(b), 3-26a(3), and 4-17d(3)(m).

zz. Adds the optional use of remote technology for conducting ODA holder internal audits and OMT surveillance activities. See subparagraph 3-5l(1)(e) and 4-18a.

aaa. Adds issue/amend special airworthiness certificates for the purpose of exhibition to function codes 8062, 9062, and 11062.

bbb. Adds ODA procedure manual instructions and procedures for failure to complete required training or failure of a required test. See subparagraph 3-5k.

ccc. Adds information for use of digital signatures on official records. See subparagraph 3-5s(5).

ddd. Removes sample Conformity Inspection Plan from Appendix A. This form is publicly available for reference.

eee. Adds information for OMT processing of Unsatisfactory Performance of an Authorized Function and Other Condition finding types. See subparagraph 4-18f.

fff. Removes inclusion of the 8110-12 in the certification plan for TC and STC.

ggg. Adds allowance for a single organization to obtain multiple authorizations. See paragraphs 2-7, 3-7, and 4-1.

hhh. Clarifies and adds information on use of forms. See 3-5w(5).

iii. Updates service monitoring throughout the order to accommodate the inclusion of airman certification to the program, holistically referred to as “continuing requirements”.

6e(3).

jjj. Clarifies classification of design changes. See paragraph 3-6a(25)(a).

kkk. Revises aging airplane inspections to clarify report submittals. See paragraph 3-

lll. Adds new timeframe for submission of procedures manual changes without OMT approval to the OMT. See paragraph 3-14a.

mmm. Clarifies PMA by licensing agreement. See paragraph 3-6f and 4-11e.

nnn. Includes the ability for the OMT lead to designate a focal. See paragraph 4-6(b).

ooo. Clarifies the use of production conformities. See paragraphs 6-12b(5), 6-13, 6-18, and 6-39.

1-6. Effective Date. This order is effective . Those provisions requiring the revision of ODA procedures manuals must be incorporated into approved ODA procedures manuals within 15 months from the effective date. ODA holders must submit revised procedures manuals for FAA approval within 12 months from the effective date.

Chapter 1. Introduction › 1-8. Related Publications.

1-7. General.

a. Under Title 49 of the United States Code (U.S.C.) § 44702(d), the FAA has broad authority to delegate to a qualified private person, or to an employee under the supervision of that person, a matter related to the issuance of certificates, or related to the examination, testing, and inspection necessary to issue a certificate on behalf of the FAA Administrator. Section 44702, as well as the corresponding provisions in the Code of Federal Regulations (CFR), permit the FAA to rescind such a delegation at any time for any reason the Administrator considers appropriate.

b. The FAA established the ODA program 14 CFR Part 183 subpart D, which addresses FAA delegations to organizations related to engineering, manufacturing, operations, airworthiness, and maintenance. No organization is required to obtain ODA. Authorization as an ODA holder is a privilege granted by the FAA Administrator and is not a right. Subpart D provides the regulatory framework for FAA oversight of organizations performing functions on the agency’s behalf. This subpart requires an FAA-approved procedures manual per § 183.53, which establishes minimum requirements for the manual’s content. In addition, §183.53(c)(15) allows the FAA to require any other information necessary to supervise the ODA holder in the performance of its authorized functions. Section 183.57 requires the ODA holder to comply with the procedures contained in its approved procedures manual. Further, § 183.55, provides that an ODA holder is subject to any limitations specified by the Administrator. The FAA noted in the rulemaking preamble for subpart D that orders such as this would provide the specifics of the ODA program and allow the agency the flexibility to revise or expand the ODA program without having to conduct additional rulemaking.

c. Because some ODAs involve both AIR and FS functions, AIR and FS personnel must work simultaneously or in coordination with each other to oversee these ODAs.

d. The ODA program does not affect how the FAA delegates authority to individuals under 14 CFR Part 183 subparts A through C. However, organizations with an ODA must use ODA authority, if available, rather than individual designees.

1-8. Related Publications. This order references several publications; please see the current version of the related publications listed in Appendix D.

10/01/2025

a. ODA Holder. An ODA holder is the organization that obtains the… › (4) Overseeing the activities of the ODA unit and ODA administrator,…

Chapter 2. ODA Program Overview

2-1. FAA Appointment and Oversight of ODAs.

a. FAA Appointment of ODAs. In accordance with 14 CFR § 183.45, the FAA may issue an ODA Letter of Designation if a need exists for delegation of the function, and the applicant meets the requirements of subpart D. In determining need, the FAA will consider factors such as the FAA workload with the organization, the benefit to the FAA in granting the ODA, and FAA resources available to manage the authorization.

b. ODA Oversight. ODA oversight includes all the activities conducted by the FAA to select, appoint, manage, surveil, renew, suspend, or terminate an ODA.

2-2. Reducing Designees. The designee system leverages the FAA’s resources by authorizing individuals and organizations to perform functions for the agency. Managing organizations is more efficient for the FAA than managing the activity of many individual designees. The FAA expects that an ODA applicant employing individual designees would, after being issued the organizational delegation, significantly reduce the number of individual designees performing the functions for which the applicant sought ODA. An ODA holder may retain individual designees to operate under standard procedures if the needed functions are not available under the ODA program. Individual designees are not considered ODA unit members, or acting in any other capacity for the ODA holder, while utilizing their individual designation to perform a function.

2-3. Definitions of ODA Holder and ODA Unit. Terms used in this order, such as “ODA administrator,” are defined in Appendix E, Definitions, of this order.

a. ODA Holder. An ODA holder is the organization that obtains the authorization from the Administrator, as set forth in a Letter of Designation. The ODA holder includes the organization and the ODA unit. It may be a certificate holder or a consultant group. The ODA holder is responsible for:

(1) Administering the ODA unit. The ODA holder must ensure that its ODA administrators and ODA UMs remain free to perform their authorized functions in accordance with FAA regulations and to ensure that no conflicting non-ODA Unit duties or other interference affects the performance of authorized functions by ODA UMs, in compliance with FAA regulations and its ODA procedures manual.

(2) Ensuring all procedures and instructions of this order are met.

(3) Complying with the regulations and following applicable policy.

(4) Overseeing the activities of the ODA unit and ODA administrator, including ensuring the ODA UMs have the expertise and experience that § 183.51 requires to make determinations on behalf of the FAA. Ensuring such expertise includes providing the ODA Ums with enough time and resources to keep up to date on the current FAA regulations, directives, and guidance applicable to the authorized functions, in addition to performing their authorized functions.

Chapter 2. ODA Program Overview › 2-5. Types of ODAs.

b. ODA Unit. The ODA unit is an identifiable group of two or more individuals within the ODA holder’s organization that performs the authorized functions. For consultant groups, the ODA holder may consist entirely of the ODA unit. In this order, some procedures and instructions apply specifically to the ODA holder, others to the ODA unit.

(1) ODA Administrator. The ODA administrator manages the ODA unit activities and communicates with the FAA. The ODA administrator must ensure that the ODA unit has sufficient organizational authority and resources to perform its authorized functions in accordance with FAA requirements. The ODA administrator must report to a level of management that is senior enough to enable the ODA unit to administer its authorized functions for the FAA without interference from others and ensure that the ODA holder follows the procedures in its FAA-approved procedures manual. The ODA administrator must also ensure that the processes in the procedures manual comply with all applicable FAA regulations, policies, guidance, and directives. If the ODA holder has more than one ODA administrator, a lead ODA administrator must be identified.

(2) ODA Unit Members (UM). Each ODA UM must:

(a) Comply with the procedures in the procedures manual.

(b) Meet the qualifications for specific functions under the ODA.

(c) Cooperate with the FAA when the FAA oversees the ODA holder.

(d) Report interference in accordance with the procedures manual.

Note: ODA UMs who are also individual designees should be aware that the delegated functions performed as an individual designee are separate and distinct from the functions performed as an ODA UM.

2-4. ODA Holder’s Commitment. To ensure that authorized functions are properly performed, an ODA holder must use the same care, diligence, judgment, and responsibility when performing the functions as the FAA would use in performing them. In carrying out the authorized functions, ODA holders and units must follow the applicable FAA regulations, directives, policies, guidance, and procedures. This commitment starts at the senior management level of the ODA holder and extends through the ODA administrator, ODA unit, and the rest of the holder’s organization. To ensure companywide support of that commitment, senior management of the organization will sign a Memorandum of Understanding (MOU) that outlines the charter, authority, and responsibility of the ODA holder. This MOU must also set forth the ODA holder’s understanding that the ODA holder and ODA unit will act in accordance with the public interest in aviation safety when carrying out authorized functions.

2-5. Types of ODAs. There are eight ODA types. Each ODA type has a section in Chapter 5 of this Order, ODA Types, Authorized Functions, and Program Requirements, that defines the available functions, any limitations, and outlines the FAA’s performance expectations for the types of programs involving the authorized functions. To qualify to perform functions available to a certain ODA type, organizations must meet certain eligibility requirements described in Chapter 3, ODA Applicant and ODA Holder Responsibilities, Section 1, Qualifications and

2-5. Types of ODAs. › h. Airmen Certification ODA (AC ODA). Holders of an AC ODA may conduct…

Eligibility. An ODA holder, when performing authorized functions, must follow all applicable FAA regulations and policies appropriate to the proper performance of those functions. See Tables 2-1.1 through 2-1.3 for an overview of the available functions. Other types of ODA programs may be added by the appropriate policy office by future changes to this order.

a. Type Certification ODA (TC ODA). Holders of a TC ODA may manage and make compliance findings, on behalf of the FAA, for type certification programs. In addition to the engineering and manufacturing approvals that are part of the certification program, a TC ODA holder may issue airworthiness certificates, but may not issue a type certificate (TC) or amended TC. A TC ODA is available to qualified organizations holding a TC issued by the FAA.

b. Production Certification ODA (PC ODA). Holders of a PC ODA may issue airworthiness certificates and approvals, determine conformity, perform evaluation leading to amendment of its production limitation record, and approve minor changes to its Quality Control Manual (QCM). To qualify for a PC ODA, an applicant must be an existing Production Certificate (PC) holder or have applied for a TC and PC.

c. Technical Standard Order Authorization Holder ODA (TSOA ODA). Holders of a TSOA ODA may issue airworthiness approvals and determine conformity of articles, test articles, and test set-ups in support of FAA-managed TC or STC projects. Only existing Technical Standard Order Authorization (TSOA) holders may qualify for a TSOA ODA.

d. Supplemental Type Certification ODA (STC ODA). Holders of an STC ODA may develop and issue Supplemental Type Certificates (STC) and related airworthiness certificates. An STC ODA is intended primarily for designers, repair stations, and operators but consultant groups with the required knowledge and experience may also qualify for an STC ODA.

e. Major Repair, Alteration, and Airworthiness ODA (MRA ODA). Holders of an MRA ODA may approve data for major repairs and alterations, issue airworthiness certificates and approvals, and perform aging aircraft inspections and records reviews. Qualified repair stations and operators are eligible for all functions available under an MRA ODA. Consultant groups are only eligible for engineering approval functions.

f. Parts Manufacturer Approval ODA (PMA ODA). Holders of a PMA ODA may issue PMA supplements based on test and computation approvals, STCs, or licensing agreements. Only existing PMA holders qualify for this ODA type.

g. Air Operator ODA (AO ODA). Holders of an AO ODA may conduct certification or portions of the certification process towards issuance of a Rotorcraft External-Load Operator Certificate and approve Aircraft Inspection Programs (AIP) for eligible aircraft operated under 14 CFR Part 91.

h. Airmen Certification ODA (AC ODA). Holders of an AC ODA may conduct airmen certification or testing and tasks associated with the airmen certification process. To be eligible to hold an AC ODA, the applicant must hold the appropriate Air Carrier or Air Agency certificate under 14 CFR Parts 121, 135, 141, 142, 145, or 147.

2-6. Authority and Functions. › b. Products and Articles Selected. The ODA is limited to the products,…

2-6. Authority and Functions. The FAA will identify the authorized ODA type(s) in the Letter of Designation and specify the authorized functions and limitations in the ODA procedures manual. To become an ODA holder or to add an ODA type, the organization must apply in accordance with Part 183, § 183.43 and Chapter 3, Section 3, Application, Selection, and Appointment.

a. Functions Available. The functions that may be authorized are shown in Tables 2- 1.1 through 2-1.4 below. Prior to authorizing functions, the FAA must validate that the ODA holder has sufficient and relevant experience to perform the functions successfully, as detailed in 14 CFR §183.47. Chapter 5 provides specific function code descriptions. Limitations for each ODA type are located in Chapter 5 as well. Individual limitations will be identified in the procedures manual.

b. Products and Articles Selected. The ODA is limited to the products, articles, or both identified in the procedures manual.

Table 2-1.1. Available Engineering Functions per ODA Type

AVAILABLE FUNCTIONS ODA Types ENGINEERING FUNCTIONS TC PC TSOA STC MRA PMA AO AC

APPROVE TECHNICAL DATA AND FIND COMPLIANCE TO AIRWORTHINESS STANDARDS 8010 11010 13010

ISSUE/AMEND STCs 11020

APPROVE OPERATIONAL OR REPAIR INFORMATION 8040 11040 12040 13040

APPROVE AIRWORTHINESS LIMITATIONS INFORMATION 8050 11050 12050 13050

ESTABLISH CONFORMITY INSPECTION REQUIREMENTS 8070 11070 13070

PERFORM COMPLIANCE INSPECTIONS 8110 11110 13110

APPROVE DATA FOR MAJOR ALTERATIONS OR MAJOR REPAIRS 8130 11130 12130 13130

PERFORM APPROVALS IN SUPPORT OF TC ODA HOLDER PROJECTS 8160 11160 13160

APPROVE EWIS INSTRUCTIONS FOR CONTINUED AIRWORTHINESS 8190 11190

Note: Underlined function codes are available to consultant group organizations.

Table 2-1.2. Available Manufacturing Functions per ODA Type

AVAILABLE FUNCTIONS ODA Types MANUFACTURING FUNCTIONS TC PC TSOA STC MRA PMA AO AC

ISSUE PMA SUPPLEMENTS - TEST AND COMPUTATION 13031

ISSUE PMA SUPPLEMENTS - LICENSING AGREEMENT OR STC 13032

ISSUE/AMEND STANDARD AIRWORTHINESS CERTIFICATES 8061 9061 11061

ISSUE/AMEND SPECIAL AIRWORTHINESS CERTIFICATES 8062 9062 11062

ISSUE DOMESTIC AIRWORTHINESS APPROVALS 9063 10063 13063

ISSUE EXPORT AIRWORTHINESS APPROVALS - ARTICLES 9064 10064 13064

ISSUE EXPORT AIRWORTHINESS APPROVALS - PRODUCTS 9065

ISSUE SPECIAL FLIGHT PERMITS 8066 9066 11066

ISSUE/AMEND SPECIAL AIRWORTHINESS CERTIFICATES - PRIMARY CATEGORY AIRCRAFT 9067 11067

ISSUE/AMEND SPECIAL AIRWORTHINESS CERTIFICATES - RESTRICTED CATEGORY AIRCRAFT 9068 11068

ISSUE PROVISIONAL AIRWORTHINESS CERTIFICATES 9069

ISSUE REPLACEMENT AIRWORTHINESS CERTIFICATES 110610

ESTABLISH CONFORMITY INSPECTION REQUIREMENTS 9070 13070

DETERMINE CONFORMITY OF ARTICLES INCLUDING TEST ARTICLES 8080 9080 10080 11080 13080

DETERMINE CONFORMITY OF TEST SET-UP 8090 9090 10090 11090 13090

DETERMINE CONFORMITY OF INSTALLATIONS OF ARTICLES INCLUDING TIA INSPECTIONS ON A PRODUCT

8100 9100 11100 13100

EVALUATE PRODUCTION LIMITATIONS RECORD, PC, AND PROCESS CHANGES 9120

APPROVE MINOR CHANGES TO QUALITY CONTROL MANUAL/PROCEDURES 9150

PERFORM APPROVALS IN SUPPORT OF TC ODA HOLDER PROJECTS 8160 11160 13160

ISSUE FAA FORM 8130-31, STATEMENT OF CONFORMITY - MILITARY AIRCRAFT 8170 9170 11170

Note: Underlined function codes are available to consultant group organizations.

Table 2-1.3. Available Flight Standards (Including Aircraft Evaluation Division (AED))

Functions per ODA Type

AVAILABLE FUNCTIONS ODA Types FLIGHT STANDARDS FUNCTIONS (INCLUDING AED) TC PC TSOA STC MRA PMA AO AC*

ISSUE/AMEND STANDARD AIRWORTHINESS CERTIFICATES 12061

ISSUE/AMEND SPECIAL AIRWORTHINESS CERTIFICATES 12062

ISSUE DOMESTIC AIRWORTHINESS APPROVALS 12063

ISSUE EXPORT AIRWORTHINESS APPROVALS - ARTICLES 12064

ISSUE EXPORT AIRWORTHINESS APPROVALS - PRODUCTS 12065

ISSUE SPECIAL FLIGHT PERMITS 12066

ISSUE/AMEND SPECIAL AIRWORTHINESS CERTIFICATES - RESTRICTED CATEGORY AIRCRAFT

12068

ISSUE REPLACEMENT AIRWORTHINESS CERTIFICATES 120610

PERFORM AGING AIRCRAFT INSPECTIONS AND RECORDS REVIEWS 12140

ACCEPTANCE OF INSTRUCTIONS FOR CONTINUED AIRWORTHINESS (ICA) 8180 11180 13180

REVIEW APPLICATION FOR OPERATOR ELIGIBILITY 15010

EVALUATE ROTORCRAFT LOAD COMBINATION FLIGHT MANUAL 15020

ADMINISTER CHIEF PILOT KNOWLEDGE AND SKILL TEST 15030

ADMINISTER OPERATIONAL FLIGHT CHECKS 15040

CONDUCT ROTORCRAFT AND EQUIPMENT AIRWORTHINESS INSPECTIONS 15050

CONDUCT BASE INSPECTION 15060

ISSUE OPERATING CERTIFICATE AND AUTHORIZATIONS 15070

EVALUATE AND APPROVE AIP 15080

DETERMINE ELIGIBILITY OF PREVIOUSLY APPROVED INTERVALS GREATER THAN THE MANUFACTURER'S INSPECTION INTERVALS

15090

Note 1: Underlined function codes are available to consultant group organizations.

Note 2: *See Next Page for Airmen Certification Functions

Chapter 2. ODA Program Overview › 2-8. Organization Management Team (OMT).

Table 2-1.4. Available Airmen Certification Functions per CFR Part

AVAILABLE FUNCTIONS AC ODA TYPE

FLIGHT STANDARDS FUNCTIONS Part Part Part Part Part Part 121 135 141 142 145 147

CONDUCT PILOT AIRMEN CERTIFICATION TESTS 16101 16201 16301 16401

CONDUCT CATEGORY II PRACTICAL TESTS 16403

CONDUCT CATEGORY III PRACTICAL TESTS 16404

CONDUCT AIRMEN CERTIFICATION TESTS FOR AIRFRAME RATING 16505 16605

CONDUCT AIRMEN CERTIFICATION TESTS FOR POWERPLANT RATING 16506 16606

CONDUCT AIRMEN CERTIFICATION TESTS FOR AIRFRAME AND POWERPLANT RATINGS 16507 16607

CONDUCT AIR CARRIER CHECK PILOT EVALUATION * 16106 16206

CONDUCT AQP INITIAL QUALIFICATION CHECKS * 16107 16207

CONDUCT AIRMAN CERTIFICATE QUALIFICATION REVIEW (ADMINISTRATIVE) 16109 16209 16309 16409

CONDUCT ANNUAL PROFICIENCY CHECKS* 16311 16411

CONDUCT INSTRUCTOR OBSERVATIONS* 16412

CONDUCT INSTRUCTOR ANNUAL PROFICIENCY CHECKS* 16413

CONDUCT EVALUATOR ANNUAL PROFICIENCY CHECKS* 16414

*These evaluations do not result in the issuance of an airman certificate and are not activity covered by Title 49 U.S.C. § 44702(d)(1). However, the FAA has determined that it will manage these functions within the AC ODA program.

2-7. Multiple ODA Types. An organization seeking an ODA may apply for as many ODA types for which it qualifies. The appointing office will issue one ODA Letter of Designation and assign one ODA number for each ODA type or combination of ODA types. In order to facilitate efficient FAA oversight, organizations with multiple ODA types under one authorization will usually be required to address all ODA types within a single procedures manual. An organization may have separate procedures manuals for each type of ODA under one authorization, only if required by the FAA.

2-8. Organization Management Team (OMT). The OMT is a group of FAA personnel established by the managing office(s) when the ODA holder is appointed. The OMT is responsible for the oversight of the ODA holder, which includes managing the delegation, conducting surveillance, and determining renewal, suspensions, or terminations. This team is made up of members who have a variety of expertise. These team members address a specific oversight component of an ODA, related to the functions the ODA holder is authorized to perform, all working toward a common goal of collectively managing the delegated organization. Chapter 4, FAA Roles and Responsibilities for ODA Oversight, outlines the specific roles and

c. Optimizing Delegation on Aircraft Certification Programs. › (2) Delegation requiring FAA coordination – All TC, STC, and PMA…

responsibilities of this team. The FAA office managers for these delegated organizations are responsible for the OMT members performing the required oversight.

2-9. Certification Activity.

a. ODA Authority. Organizations that hold ODAs are expected to complete all projects and airmen certifications possible using ODA authority. However, an ODA holder may use standard certification or airmen certification procedures for projects or functions not authorized under the ODA. All approval functions needed for project work must be accomplished by the organization’s ODA UMs, unless the use of other approvals is provided for in this order. All certification functions must be performed by the UMs under the ODA type for which the ODA holder project is generated.

b. FAA and Industry Guide to Product Certification. As outlined in FAA Order 8110.4, the FAA and organizations with ODAs are encouraged to utilize the FAA and Industry Guide to Product Certification to plan and manage an effective and efficient product certification processes. The ODA holder should work with the OMT to develop Partnership for Safety Plans (PSP) to provide the foundation from which to build mutual confidence, leadership, teamwork, and efficient business practices. If the PSP includes an issues resolution process for issues resolution of type certification activities, in the case of any conflict or gap, the provisions of FAA Order 8100.20, Aircraft Certification Service (AIR) Issue Resolution and Appeal Processes will control.

c. Optimizing Delegation on Aircraft Certification Programs. For TC, STC, and PMA ODA types that manage certification programs, an ODA holder may be authorized all the functions necessary (per tables 2-1.1 through 2-1.3) for conducting a certification project but the level of delegation on a particular project might be less than what is authorized for that ODA. One objective of the ODA program is to optimize the use of delegation as follows:

(1) Delegation without FAA coordination – This order sets forth procedures for approving a TC, STC, or PMA ODA holder’s procedures manual that defines the types of projects to be accomplished without the need for FAA notification via a program notification letter (PNL). This process is called “No-PNL” and is explained further in paragraph 3-6. No- PNL is appropriate for projects that are similar to those successfully completed by the ODA holder in the past. OMTs should engage with the ODA holder to define all areas where projects can utilize the No-PNL process based on the holder’s demonstrated capability and performance in these areas. ODA holders are ineligible for No-PNL for the first two years after initial authorization. After two years, the ODA holder may request, and the OMT may approve, No- PNL if appropriate.

(2) Delegation requiring FAA coordination – All TC, STC, and PMA projects that are not eligible for the No-PNL process must be initiated by a PNL and an OMT must provide a response concurring with the project and the associated level of delegation. When making level of delegation decisions, OMTs must apply the criteria in paragraphs 4-11.a.(1)(c)(2), 4- 11.c.(1)(c)(2), and 4-11.e.(1)(a)(2)iii, which include criteria for determining FAA discretionary involvement. Given that the ODA holder has been determined to be qualified to perform the function, OMTs should only retain those aspects of the functions as needed based on factors such

c. Optimizing Delegation on Aircraft Certification Programs. › (3) Delegation and FAA Standard Certification Projects – The FAA may…

as performance issues, service difficulties, and areas critical to safety. For TC and STC projects, factors may include underlying assumptions related to human factors with respect to a critical system design feature of a transport category airplane. In addition, for TC and amended TC projects, factors may include safety critical information for Part 25 transport category airplanes. When an OMT decides to retain a part of a project, the OMT must provide the ODA holder with the reason(s) for FAA retention. This will allow the ODA holder to take action so the function can be delegated on future projects.

(3) Delegation and FAA Standard Certification Projects – The FAA may find benefit in efficient use of ODA holder capability for standard certification projects that require authorized functions or activity outside of the ODA holder’s authorization. In such cases, the FAA will manage the project while utilizing the ODA unit for the authorized functions and approved processes within the ODA holder’s authorization at the discretion of the OMT. For project activity beyond the scope of the ODA holder's authorization, the FAA may allow the use of individual designees, may retain activities, or both, with or without recommendations documented by those designees. The details of FAA management with ODA holder assistance should be defined on a project-by-project basis in an agreement (similar to a PNL and PNL response) including what the FAA will do and what the FAA expects the ODA holder, UMs, and individual designees to do on the project. For example, the ODA holder’s project plan would propose an FAA standard certification project with the ODA holder doing as much project management as the OMT agrees is appropriate, and the ODA UMs and designees determining conformity, airworthiness, and compliance to the extent the OMT agrees. Use of delegation in this way might be appropriate for unique projects, or as a means to qualify for expansion of ODA authority (see paragraphs 3-23 and 4-8b).

3-2. ODA Holder Qualifications. › c. Experience.

Chapter 3. ODA Applicant and ODA Holder Responsibilities

Section 1. Qualifications and Eligibility

This section elaborates on the qualification and eligibility requirements set forth in 14 CFR Part 183 Subpart D that an organization must meet to qualify for consideration for an ODA.

3-1. ODA Holder Location. Each ODA holder must be located in the United States. However, ODA UMs and facilities may be located outside the United States if agreed to by the OMT through approval of the procedures manual.

3-2. ODA Holder Qualifications. Every applicant must meet the qualifications in this paragraph for the specific type of ODA requested.

a. Integrity. The Administrator is required to consider “assigning, maintaining, and enhancing safety and security as the highest priorities in air commerce” under 49 U.S.C. § 40101(d)(1). The applicant’s management, its ODA administrator, and the proposed ODA UMs must possess demonstrated integrity in their experience with the FAA in addition to a safety culture that is actively promoted by senior management. Safety culture promotion must include a commitment on the part of senior management to safety, realistic practices for handling hazards, continuous organizational learning, and care and concern for hazards shared across the workforce. Such attributes are relevant to not only the ODA holder's ability to successfully perform delegated functions on behalf of the FAA, but indicative of the cooperation that Section 183.57(d) requires ODA holders to provide.

b. Organizational Model. One key to the success of the ODA system is that the ODA holder’s executive management fully supports the ODA unit and conducts itself with the clear expectation that ODA unit members will conduct authorized functions dispassionately, impartially, and in the interest of aviation safety as opposed to the financial or commercial interests of the ODA holder. The organizational model for ODAs will vary depending on the ODA holder’s functions, size, and corporate structure. The model must meet the following:

(1) The ODA administrator must be in a position that provides authority to act on the FAA’s behalf. The ODA administrator must ensure that the ODA Unit performs all authorized functions in accordance with the regulations and applicable FAA policy. The ODA administrator must also ensure that the ODA holder complies with its ODA procedures manual.

(2) Each ODA UM must be in a position that provides enough authority and time to perform authorized functions.

(3) An ODA UM must have no conflicting non-ODA unit duties or other interference that affects the performance of authorized functions. Additionally, an ODA UM must not have responsibilities that conflict with those of the ODA unit. Each ODA UM must perform authorized functions with reference to the public interest in aviation safety.

c. Experience. Each applicant must have experience and a thorough working knowledge of the FAA regulations, methods of compliance, policy, processes, and procedures applicable to the authorized functions sought.

3-3. ODA Staff Qualifications. › a. ODA Administrator.

(1) Applicants seeking a TC ODA, STC ODA, or PMA ODA must have a recent and successful history performing certification work and have completed projects as an organization. See 14 CFR § 183.47. The applicant must have experience issuing (or having responsibility for managing programs leading to the issuance of) certification approvals of the same type and complexity as those for which authorization is sought, in order to be eligible for ODA, even if individuals of the ODA applicant are experienced individuals.

(2) An applicant for a type certificate (TC) and Production Certificate (PC) may be appointed as a PC ODA if it is expected to obtain a PC.

(3) Each applicant for AO ODA functions must have the ability to manage operator certification projects or program approvals.

(4) Applicants seeking an AC ODA must have a recent and successful history performing airmen certification activity or have responsibility for managing programs leading to the issuance of airman certificates of the same type and complexity as those for which authorization is sought. 14 CFR Part 145 repair stations may be eligible, providing applicants for mechanic certificates meet the experience requirements of 14 CFR § 65.77(b)(1) or (2), and the ODA holder maintains UM eligibility requirements specified in paragraph 3-3d(3)(d). In addition, an applicant for an Airmen Certification ODA must have and maintain an appropriate Air Carrier or air agency certificate under 14 CFR Part 121, 135, 141, 142, 145, or 147.

d. Resources. Per 14 CFR § 183.47(a), each applicant must have sufficient administrative and technical resources to satisfy all the requirements of the requested authorization. It must employ an ODA administrator, per 14 CFR § 183.51, and have available an ODA unit consisting of the appropriate personnel capable of performing the authorized functions requested. Except for the lead administrator, an ODA unit may consist solely of individuals who are not employed full time by the organization.

e. Facilities. Each ODA holder’s facilities must be appropriate for the type of ODA sought, as detailed for each ODA type in this chapter.

3-3. ODA Staff Qualifications. The ODA administrator and ODA unit must meet the Eligibility, References, Qualifications, and Disqualifiers (disqualifiers are not retroactive) paragraphs located in FAA Order 8000.95, Volume 1, Chapter 2; and as follows:

a. ODA Administrator. The ODA administrator must be a full-time employee of the ODA holder and must have technical experience with the functions performed under the ODA and management experience commensurate with the type of ODA and extent of the authorization. This experience must enable the ODA administrator to manage the entire ODA unit activities effectively. An organization may choose to have several administrators to manage different aspects of the delegated authorization. If the ODA applicant chooses to have several administrators, the organization must identify a lead ODA administrator. Additional ODA administrators need not be full-time employees but must meet all other ODA lead administrator qualification requirements and be listed in the organizational chart. The following are the minimum requirements for an ODA administrator:

3-3. ODA Staff Qualifications. › c. Manufacturing ODA UMs.

(1) Experience. At least 5 years of working experience with the FAA on projects similar to those authorized under the ODA. For an AC ODA, these 5 years of working experience with the FAA may include a combination of lead administrator experience and experience from additional administrators if the technical experience cannot be accomplished with a single administrator (see paragraph 3-5g(1) for guidance on additional administrators). AC ODA applicant experience must include approved airmen training programs or airmen certification programs commensurate with the underlying operating rules in 14 CFR Parts 121, 135, 141, 142, 145, and 147.

(a) Technical Experience. During the 5 years of working with the FAA, an administrator’s technical experience must include various levels of technical, airworthiness, or operational responsibilities and experience. This experience may include but is not limited to: compliance engineer; quality assurance inspector; manufacturing inspector; or airworthiness inspector or technical operations responsibilities and experience such as: Director of Operations (DO); chief pilot, fleet manager, training program manager, director of training, standards manager, quality assurance/safety manager, or operations inspector.

(b) Management Experience. The ODA administrator must also have management experience in one or more technical disciplines, such as engineering, manufacturing, airworthiness, maintenance, quality assurance, operations, or training program management.

(2) Comprehensive knowledge of FAA regulations, policies, and procedures applicable to the ODA functions.

(3) Sufficient technical knowledge, training, skill, and experience for the type of ODA sought. An ODA administrator need not be qualified to perform all authorized functions but must possess at least a basic understanding of all of the functions performed.

(4) ODA Administrator Training. All ODA administrators must complete ODA applicant training prior to appointment. This training is available online at: https:// designee.faa.gov/. This includes “Part I” and “Part II” modules based on the type of authority sought.

b. Engineering and Flight Test ODA UMs. The engineering or flight test ODA UM must meet the same qualifications required for an FAA Designated Engineering Representative (DER) defined in FAA Order 8000.95, Volume 9, and any additional policy that addresses qualifications for engineering functions.

(1) These ODA UMs need to meet those requirements in FAA Order 8000.95, Volume 9, for the functions and areas they will perform.

(2) The requirement to have direct working experience with the FAA may be satisfied by having direct working experience within an ODA holder or other delegated organization.

c. Manufacturing ODA UMs. The manufacturing ODA UM performing airworthiness or conformity functions must meet the minimum qualification requirements to perform those activities in FAA Order 8000.95, Volume 8.

(a) Rotorcraft External-Load Operator Functions. › 5. Each ODA UM for function code 15050 who conducts airworthiness…

d. UMs Performing FS Functions. Each ODA UM performing FS functions must meet the following (as applicable):

(1) MRA ODA UMs.

(a) Each MRA ODA UM conducting airworthiness functions must meet the qualifications of a Designated Airworthiness Representative-Maintenance (DAR-T) in Order FAA 8000.95 Volume 5 to perform the specific functions listed, based on the airworthiness category of aircraft (i.e., standard or special airworthiness certification of aircraft or aging aircraft inspections).

(b) Any UM required to hold airmen certification under 14 CFR Part 65 must maintain the currency, ratings, and medical qualifications of the certificate for the duration of the appointment.

(c) For UMs who perform aging Aging Aircraft inspections, the UMs must meet the qualifications in FAA Order 8900.1, Flight Standards Information Management System (FSIMS) and FAA Order 8000.95 Volume 5.

(2) AO ODA UMs. For AO ODA holders, the baseline experience for UMs is dependent on whether the function codes are associated with a Rotorcraft External-Load Operator (14 CFR Part 133) or an AIP Approval (14 CFR § 91.409(f)(4)), which are listed below. UMs must complete all FAA-required training prior to performing the functions.

(a) Rotorcraft External-Load Operator Functions.

1. For maintenance functions, 3 years of experience as a certificated mechanic maintaining the same category and class of aircraft is required.

2. For operations functions, 3 years of experience as a pilot operating in accordance with 14 CFR Part 133 is required.

3. Each ODA UM for function codes 15010, 15020, 15060, and 15070 must have completed the full certification process for either an Air Operator Certificate or an Air Carrier Certificate in accordance with FAA Order 8900.1, either as an applicant or as a former Aviation Safety Inspector.

4. Each ODA UM for function codes 15030 and 15040 must hold the appropriate pilot certificates and ratings. The UM must also have 3 years of experience conducting external-load operations as a pilot in accordance with 14 CFR Part 133 or as an FAA inspector (operations).

5. Each ODA UM for function code 15050 who conducts airworthiness record reviews or inspections must meet the qualifications of a Designated Airworthiness Representative-Maintenance (DAR-T) in Order FAA 8000.95, Volume 5 to perform the specific functions listed, based on the category of aircraft (i.e., standard or special airworthiness certification of aircraft or aging aircraft inspections).

(3) AC ODA UM. › (d) 14 CFR Part 145 and 14 CFR Part 147.

(b) Part 91 AIP Approvals.

1. Each ODA UM for function codes 15080 and 15090 must have a mechanic’s certificate with Airframe and powerplant ratings issued under 14 CFR Part 65, at least 3 years of experience maintaining the same category and class of aircraft associated with the proposed inspection program, and have specialized knowledge/experience with technical publications, implementation, or revision of AIPs per 14 CFR § 91.409(f)(1-4). See Chapter 5, ODA Types, Authorized Functions, and Program Requirements, Section 7, Air Operator ODA (AO ODA), for more details.

2. Each ODA UM for function codes 15080 and 15090 must also have specific knowledge of the airworthiness limitations, modifications, and alterations performed prior to being assigned an ODA project involving an aircraft certificated with a Special Airworthiness Certificate.

(3) AC ODA UM. Each ODA unit member performing airmen certification functions must meet the following (as applicable):

(a) 14 CFR Part 121 Aircrew Program Designee Unit Member (APD UM) and 14 CFR Part 135 APD UM.

1. Unit Members performing airmen certification functions under AC ODA for 14 CFR Part 121 or 14 CFR Part 135 must meet the same eligibility requirements and maintain the same training and qualifications as would be required for individual Aircrew Program Designees (APD) accomplishing the same functions. See FAA Order 8000.95, Volume 6, for additional information. This unit member role is referred to as APD UM throughout this order although they are not individual designees.

2. Unit Members accomplishing functions under an approved Advanced Qualification Program (AQP) must meet all requirements of the approved AQP and FAA Order 8900.1 Volume 3 Chapter 21.

(b) 14 CFR Part 141. Unit Members performing airmen certification functions under Airmen Certification ODA 14 CFR Part 141 must meet the same eligibility requirements and maintain the same training and qualifications as would be required for individual Designated Pilot Examiners (DPE) accomplishing the same functions. See FAA Order 8000.95 Volume 3, for additional information.

(c) 14 CFR Part 142 Training Center Evaluator Unit Member (TCE UM). Unit Members performing Airmen certification functions under Airmen Certification ODA 14 CFR Part 142 must meet the same eligibility requirements and maintain the same training and qualifications as would be required for individual Training Center Evaluators (TCE) accomplishing the same functions. This unit member role is referred to as TCE UM throughout this order. See Order FAA 8000.95 Volume 7, for additional information.

(d) 14 CFR Part 145 and 14 CFR Part 147. Unit Members performing Airmen certification functions under AC ODA 14 CFR Part 145 or 14 CFR Part 147 must meet the same eligibility requirements and maintain the same training and qualifications as would be required

c. TSOA ODA. › (1) Meet the qualifications in paragraph 3-2.

for individual Designated Mechanic Examiners (DME) accomplishing the same functions. See FAA Order 8000.95, Volume 5 for additional information.

3-4. Eligibility. Any organization consisting of two or more individuals may apply for an ODA. However, not every organization is eligible for every ODA type. To perform functions available to a certain ODA type, organizations must meet the following eligibility requirements:

a. TC ODA. To become a TC ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2.

(2) Have sufficient experience in TC activities.

(3) Hold a TC that it previously obtained from the FAA through standard procedures.

(4) Have experience in finding compliance with the applicable FAA regulations, determining conformity, and processing TC-related forms and documentation.

(5) Have facilities that can accommodate ODA personnel and records.

(6) To qualify for the Acceptance of ICA (function code 8180), the ODA holder must have successfully demonstrated the capability to develop acceptable ICA.

b. PC ODA. To become a PC ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2; and

(2) Hold a current PC issued under the standard procedures of 14 CFR Part 21; or

(3) Have applied for a TC and have a high probability of obtaining an FAA PC for the TC’d product. The applicant’s QC system must:

(a) Have sufficient detail to provide positive control of articles during the type certification program.

(b) Assure that each completed prototype article or component is manufactured in accordance with the QC procedures and conforms to the applicable design data.

(c) Be based on Part 21 production approval quality system requirements.

Note: Failure to obtain a PC for the TC’d product will result in suspension or termination of the ODA.

(4) Have facilities that can accommodate ODA personnel and records. The facilities must be at the ODA holder’s main manufacturing location.

c. TSOA ODA. To become a TSOA ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2.

(3) If issuing PMA supplements under Test and Computation (function… › (b) Have sufficient experience making findings of compliance with the…

(2) Hold a current TSOA.

(3) Have facilities that can accommodate ODA personnel and records. These facilities must be located at the TSOA manufacturing facility.

d. STC ODA. To become an STC ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2.

(2) Hold a current STC issued by the FAA.

(3) Have sufficient experience developing STC data, finding compliance with the applicable FAA regulations, and processing STC-related forms and documentation.

(4) Have facilities that can accommodate ODA personnel and records.

(5) To qualify for the Acceptance of ICA (function code 11180), the ODA holder must have successfully demonstrated the capability to develop acceptable ICA.

e. MRA ODA. To become an MRA ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2.

(2) Have documented and verifiable experience in the specific MRA functions sought, in making findings of compliance with the applicable FAA regulations or airworthiness certification and approval, and in the administrative processing of related forms and documentation.

(3) Only holders of Part 145 Air Agency Certificates or Part 121 or 135 Air Carrier Certificates may be authorized to conduct airworthiness approval functions under MRA ODA.

(4) Have facilities that can accommodate ODA personnel and records. For airworthiness approval functions, the facilities must meet the requirements of the Part 121, 135, or 145 certificate held, either by make and model operated or ratings held.

f. PMA ODA. To become a PMA ODA holder, the applicant must:

(1) Meet the qualification criteria in paragraph 3-2.

(2) Have been issued and hold a PMA issued by the FAA.

(3) If issuing PMA supplements under Test and Computation (function code 13031):

(a) Have been issued and hold a PMA issued by the FAA using test and computation procedures.

(b) Have sufficient experience making findings of compliance with the applicable regulations and determining conformity for PMA projects as described in FAA Order 8110.42.

(2) Have documented and verifiable experience in the following (as… › (f) For function codes 15080 and 15090, specialized knowledge in…

(c) Apply for and obtain function codes (as applicable) 13010, 13040, 13050, 13070, 13080, 13090, 13100, and 13110.

(d) Have sufficient experience determining whether the fabrication of a particular article requires changes in the quality system, and if applicable, incorporating changes in the quality system.

(e) To qualify for the Acceptance of ICA (function code 13180), the ODA holder must have successfully demonstrated the capability to develop acceptable ICA.

(4) If issuing PMA supplements substantiated by licensing agreement or STC (function code 13032):

(a) Have been issued and hold a PMA substantiated by licensing agreement or STC.

(b) Apply for and obtain function codes 13070 and 13080.

(c) Have sufficient experience to determine whether the manufacturing of a particular article requires changes in the quality system and, if applicable, incorporating changes in the quality system.

(5) Have facilities that can accommodate ODA personnel and records. The facilities must be at the location identified on the ODA holder’s PMA.

g. AO ODA. To become an AO ODA holder, the applicant must:

(1) Meet the qualifications in paragraph 3-2.

(2) Have documented and verifiable experience in the following (as applicable to the functions sought):

(a) The specific AO functions sought,

(b) Making findings of compliance with the applicable FAA regulations and guidance,

(c) Conducting aircraft inspections to verify airworthiness,

(d) Conducting operational checks,

(e) The administrative processing of certification forms and documentation, and

(f) For function codes 15080 and 15090, specialized knowledge in aircraft maintenance, inspection programs, and technical publications commensurate with AIP development. This experience must have been gained in activities that resulted in the approval of inspection or maintenance programs with the FAA, Original Equipment Manufacturer (OEM) ICA development, or at another ODA holder performing the like activities (ICA).

(3) For AC ODA functions: › (d) 14 CFR Part 145:

(3) Have the facilities, resources, personnel, and qualifications appropriate to the functions for the type of ODA sought.

h. AC ODA. To become an AC ODA in accordance with 14 CFR § 183.47, the applicant must:

(1) Meet the qualifications in paragraph 3-2; and

(2) Have documented and verifiable experience in the following (as applicable to the functions sought):

(a) The administrative processing of certification forms and documentation,

(b) Internal quality assurance and quality control, and

(c) Have facilities that can accommodate ODA personnel and records.

Note: Existing FAA certificate holders (part 121/135 AOs or Part 145 air agencies) can qualify based on the appropriate airframe ratings or makes and models operated.

(3) For AC ODA functions:

(a) 14 CFR Part 121 or 135:

1. The applicant/ODA holder must maintain an active 14 CFR Part 121 or Part 135 Air Carrier certificate with at least one approved airman qualification curriculum resulting in airmen certification.

2. There must be an associated Aircrew Designated Examiner (ADE) program with an approved ADE MOU.

(b) 14 CFR Part 141. The applicant/ODA holder must maintain an active 14 CFR Air Agency certificate with at least one approved training course resulting in airmen certification.

(c) 14 CFR Part 142:

1. The applicant/ODA holder must maintain an active 14 CFR Part 142 Training Center certificate with at least one approved airman qualification program resulting in airmen certification.

2. There must be an active MOU between the FAA and the 142 certificate holder as defined in FAA Order 8900.1 Volume 3, Chapter 54, or FAA Order 8000.95 Volume 7, as appropriate.

(d) 14 CFR Part 145:

(e) 14 CFR Part 147: › 3. The aviation maintenance technician school must meet the MTEL of FAA…

1. The applicant/ODA holder must maintain an active 14 CFR Part 145 Air Agency certificate with a minimum of five years continuous experience and evidence of a high level of knowledge and experience in the subject areas required for aviation mechanic certification in both reciprocating and turbine-engine aircraft.

2. The applicant/ODA holder must have available airworthy aircraft, other aircraft, aircraft subassemblies, operational mockups, or other aids for testing airmen applicants.

3. The repair station must meet the Minimum Tools and Equipment Listing (MTEL) requirements of FAA Order 8900.1, Volume 5.

(e) 14 CFR Part 147:

1. The applicant/ODA holder must maintain an active 14 CFR Part 147 Air Agency certificate with at least one of the following ratings;

• Airframe • Powerplant • Airframe and Powerplant

2. The applicant/ODA holder must have available airworthy aircraft, other aircraft, aircraft subassemblies, operational mockups, or other aids for testing airmen applicants.

3. The aviation maintenance technician school must meet the MTEL of FAA Order 8900.1, Volume 5.

1. Administrative Changes. › ix. Formatting.

Section 2. Procedures Manual Content

3-5. Procedures Manual Content. The procedures manual must address all procedures and limitations regarding functions performed on the FAA’s behalf by the ODA holder. The OMT may not use separate documentation to establish agreements or procedures (unless referenced in the manual) for functions performed by the ODA holder. Appendix B provides a sample manual template for format, content location, and sample text. This section details the requirements for the manual content as well as provides guidance for the procedures. The procedures manual must contain at least the following:

a. Title Page with Signature Blocks. Signature blocks for the FAA managing office(s).

b. Table of Contents and Revision Control. General table of contents and a method for maintaining configuration control, such as complete revision control, a log of revisions/list of effective pages, or both.

c. Manual Control. Procedure for revising the procedures manual and obtaining OMT approval of revisions as appropriate.

(1) Changes Requiring FAA Approval. The procedures manual must state that “Revisions to this manual, except those identified below, must be approved by the FAA before implementation.” Any revision which is incorporated without FAA approval as identified below must be submitted to the OMT 30 calendar days after the manual is revised.

(a) Fully describe the specific types of changes that do not require OMT approval. The following types of changes are appropriate for incorporation by the ODA holder without OMT review.

1. Administrative Changes.

i. Spelling.

ii. Grammar.

iii. Typos.

iv. Punctuation.

v. Abbreviations and acronyms.

vi. Cross references (as long as the revision is not substantive).

vii. Table of contents.

viii. Revision control sheet updates.

ix. Formatting.

(2) ODA Holder Control. › (a) Method of documenting OMT approval of changes.

x. Page numbers (not major section numbers).

xi. Subparagraph numbers (not major section numbers).

xii. List of controlled manual holders (as applicable).

2. Definitions, Form Updates/References (as long as these are not substantive).

i. Updating definitions to match FAA standard definitions.

ii. Updates to reflect latest, most current FAA forms and instructions.

iii. Internal company form number changes.

iv. Minor changes to company/ODA forms that do not affect the intended purpose, content, or usage of the form.

v. Updates of the revision levels and paragraph citations of FAA orders and advisory circulars (AC), as long as the manual procedures are not changed.

3. FAA Signed Agreements. Incorporation of an update to a Memorandum of Understanding (MOU), signed FAA agreement, or both already contained or referenced in the manual.

4. Addition of information required by revisions to FAA orders (e.g., FAA Order 8110.4, Type Certification; FAA Order 8130.2, Airworthiness Certification of Aircraft; this order; etc.), that provides additional clarification or guidance but does not make substantive changes to the procedures or requirements. This includes minor revisions to clarify content without altering the intent or procedures and internal organizational name changes (not organizational structure). Any name change for the ODA holder or changes in the ODA holder/unit organizational structure must be submitted for approval.

(b) Specifically identify the method of documenting and determining approval requirements for changes in facilities or organizational structure. This process will detail how the ODA holder will make changes to the procedures manual’s Appendix B, ODA Holder and Unit Organizational Chart, and Appendix C, ODA Facilities. It must also define what changes need to be approved by the FAA before incorporation.

(2) ODA Holder Control. The procedure for manual control by the ODA holder should include the following:

(a) Method of documenting OMT approval of changes. If a manual revision needs FAA approval, define how the ODA administrator will submit the revision to the OMT lead. All revisions must include a log of revisions, a list of effective pages, or both. Revised text must be identified and the revision level for the change indicated on the log of revisions or list of effective pages.

3-5. Procedures Manual Content. › f. Organizational Structure and Responsibilities.

(b) A list of who is to receive the procedures manual and manual updates and revisions.

d. Preface and Introduction.

(1) The procedures manual preface and introduction must discuss how the procedures manual establishes the responsibilities and procedures to be followed when performing the functions authorized by the FAA under 14 CFR Part 183 Subpart D.

(2) This section must include the procedures for FAA and ODA holder communications. An ODA holder’s procedures manual may include the preferred procedures for UMs seeking guidance and clarification from within the organization. However, an ODA holder, through its procedures manual or otherwise, must not prohibit communication to be initiated by a UM, such as when a UM needs more detailed guidance from the OMT beyond that obtained from their ODA administrator(s) or other UMs, or seeks to communicate with or seek the advice of FAA staff, for any purpose. The procedures manual must state that UMs are free to communicate directly with the OMT, or other FAA staff, without restriction. Additionally, it is acceptable for the procedures manual to include a process for sharing the results of communication within the organization in order to ensure that all UMs receive similar guidance, when appropriate.

Note: For Flight Standards ODA types, an electronic format must be used to communicate any final products with the OMT or any other FAA line of business (LOB), if available. The electronic format must be compatible with the FAA’s current software applications.

e. Authorized Functions and Limitations. The Authorized Functions and Limitations section must identify the authorized functions, products, articles, airmen type and rating testing capability, or any combination of addressed by the ODA holder’s authority. Limitations of the ODA must be clearly defined in accordance with Chapter 5. Limitations should define the specific authority of the organization in terms of specific products and models, certificates (if applicable), or any other limitations deemed necessary by the OMT. For AO ODA types, this section must list the products by make, model, and series (M/M/S), by part number, or by nomenclature. For AC ODA types, this section must list the types of airman certificates, ratings, and program authorizations based on the underlying 14 CFR operator/agency certificate held by the ODA holder. A separate list of products, M/M/S, or certificates may be used if the procedure for maintaining the list is described in the manual.

f. Organizational Structure and Responsibilities. The procedures manual must include a description of the ODA holder and ODA unit organizational structure and responsibilities. This section should explain the organizational structure and responsibilities of ODA holder management, including a description of the ODA unit location within the organization. This section should also describe the reporting paths up through management for the UM’s ODA duties, as well as any other duties a UM may have within the organization. The description of responsibilities for ODA holder management include:

3-5. Procedures Manual Content. › i. ODA Unit Member Information.

(1) Establishing corporate policies that will not conflict with applicable law or policy. Any certificate holder required to have a Safety Management System, who may also be an authorized ODA holder, must incorporate the ODA Program in its Safety Management System.

(2) Remaining independent of and not interfering with functions and activities conducted under the ODA authority.

(3) Maintaining adequate qualified personnel to accomplish the ODA activities.

(4) Providing the necessary support personnel when internal and FAA audits are being accomplished.

(5) Ensuring all personnel receive the training required by 14 CFR Part 183 Subpart D as implemented by this order.

g. ODA Administrator and UM Duties and Responsibilities. ODA Administrator Responsibilities. The ODA administrator responsibilities are defined in this section. The ODA administrator is the focal point for the ODA holder and has the primary responsibility and authority for assuring the ODA holder’s compliance with FAA regulations, policy, guidance, and directives. The ODA administrator is responsible for managing the performance of all authorized functions, including the incorporation of corrective action for all deficiencies, as well as managing incoming and outgoing FAA correspondence. If additional administrators with unique titles or responsibilities are needed, include additional paragraphs and organization chart references for each.

(1) ODA UM Responsibilities. The ODA UM responsibilities are defined in this section. These individuals are responsible for performing authorized functions in accordance with the procedures manual and FAA regulations, directives, policies, and guidance. Each ODA UM’s authority and limitations is maintained in the ODA UM listing.

h. Required Capabilities and ODA Unit Positions. This chapter should include a general description of the required qualifications and capabilities for each ODA unit position. The procedure should also specify any qualification requirements for functions not specifically addressed in FAA Order 8000.95, such as approval of test plans, flight manual supplements, operations certificates, etc. This process should also point to the procedures manual’s Appendix D, Required ODA Unit Capabilities and Positions, which defines, in detail, ODA unit positions and required qualifications.

Note: It is the ODA holder’s responsibility to ensure the ODA unit is staffed with personnel authorized to perform the functions of the organization as described in the manual’s appendix D. The ODA holder must notify the OMT lead at any time the ODA unit is not capable of performing a function described in appendix D of their manual.

i. ODA Unit Member Information. The ODA UM listing may be in any format acceptable to the OMT and must be provided to the OMT, as required. The procedures for the UM listing must describe:

(1) ODA UM Listing. This chapter must describe the procedures for maintaining unit member information.

(1) ODA UM Listing. › (d) The procedures for how the UM listing will be updated and…

(a) How the ODA holder will include the required content.

(b) For each active UM, the UM listing must contain:

1. Legal Name.

2. Signatures.

3. Location and name of the company for any UM located at facilities not identified in appendix C of the ODA procedures manual.

4. Functions and limitations for each UM.

5. Authority and limitations corresponding to the organization’s authority and functions defined in appendix D of the ODA procedures manual. The authority for all members will be defined by function codes from this order, and engineering and flight test functions must be further described by discipline and defined by the ODA holder in their manual. Use of the DER charts previously found in FAA Order 8110.37, Designated Engineering Representative (DER) Handbook (now located at the following link: https://www.faa.gov/other_visit/aviation_industry/designees_delegations/delegated_organization s/information_) or the DER charts located in the FAA’s Designee Management System (DMS) referenced in FAA Order 8000.95 are the only acceptable methods for ODA holders issued an authorization prior to release of revision C of this order. For new ODA applications submitted after effectivity of revision C of this order, the charts referenced in FAA Order 8000.95 must be used.

6. For a TC ODA, the ODA holder must clearly define the boundaries and limitations of each UM authorized for any alternative method of compliance (AMOC) approval authority granted.

7. For AO and AC ODA UMs, the type, number, and ratings for each airman certificate required for each applicable function.

8. For AC ODA UMs, who test based on an approved curriculum, include a listing of approved airmen certification curriculum for which the UM is authorized to accomplish testing.

(c) The procedures for documenting a summary of the number of unit members that perform each function for each discipline that is applicable to the ODA holder (see Appendix A, Figure A-14 or Appendix C, Section 3.0 for an outline of the functions and disciplines).

(d) The procedures for how the UM listing will be updated and maintained.

(1) UM Selection and Appointment Process. › (a) Application.

(e) The procedures for coordinating changes to the listing with the OMT along with the information the organization will provide to the OMT.

(2) AC ODA UM Table. For AC ODA holder access to FAA systems, such as Integrated Airman Certification and Rating Application (IACRA) and Mechanic Test Generator (MTG), the ODA holder must include procedures and frequency for providing the AC ODA UM table to the OMT. The AC ODA UM table must include the following:

(a) Unit member number (provided by the OMT from DMS)

(b) Legal First, Middle, and Last Name

(c) FAA Tracking Number (FTN)

(d) Airman certificate number

(e) Unit member status (active, removed, and removed-performance (see paragraph 3-5 j.(3)))

(f) Authorized Function Codes

(g) Limitations

j. UM and ODA Administrator Selection and UM Removal. The ODA holder must have procedures to select ODA UMs and administrators, as well as procedures to remove ODA UMs. These procedures must also include how to coordinate these selections with the FAA, when required. The procedures must address:

(1) UM Selection and Appointment Process. The ODA holder’s procedures manual must contain its ODA UM selection and approval process and documentation. The basic UM selection and appointment process should follow the process depicted in Figure 3-4.1, Unit Member (UM) Selection Process.

(a) Application. The ODA holder should complete an initial administrative processing of the application to make sure that the information required to be documented for the proposed staff member is completed. The procedures must ensure that the application content demonstrates that the staff member meets the eligibility and qualification requirements outlined in Section 1, Qualifications and Eligibility, of this chapter. The procedures must describe how the ODA holder will process the documentation for application. All forms used to document this process should be listed in the procedures manual’s Appendix E, Forms.

Note: For existing designees that will be appointed with the same authority or UMs at other delegated organizations that will be appointed with the same authorized functions (see 3-5j1(c)), the application must include evidence of designee authority or evidence from the other delegated organization of the ODA UM’s authority and limitations. The application must also include evidence of successful completion of current applicable FAA training.

j. UM and ODA Administrator Selection and UM Removal. › (3) UM Removal Process.

(b) FAA Prescreening. The organization must notify the OMT of the proposed UM for the FAA to conduct their prescreening. The procedure needs to define exactly what information is documented and how coordination with the OMT will occur.

(c) ODA UMs at Another Delegated Organization or Existing Designees. An ODA holder may appoint prospective ODA UMs that are UMs at another delegated organization or existing designees but the ODA holder must evaluate the prospective UM’s existing authority or authorized functions. The prospective UM may be appointed to perform the same functions without further evaluation identified in 3-5j1(d) if they have experience on the same type and complexity of products, articles, projects, testing, or operations performed by the ODA holder. If the prospective ODA UM is expected to perform any functions outside the scope of current authority, the ODA holder must evaluate the UM for the additional functions.

(d) Evaluation of the Application.

1. Evaluation by Focal Point (Advisor). The advisor conducts a preliminary review of the application for general eligibility and qualifications. The advisor is responsible to determine the appropriate authority and limitations, may interview the applicant, and check the applicant’s references. An organization’s process needs to identify who is responsible to act in the role of the advisor, any documentation required, and how interviews are accomplished.

2. Evaluation Panel Review. An organization’s procedures manual needs to identify the people, not necessarily by name, but by position, that may serve on the evaluation panel. Consisting of at least two people, the evaluation panel may include the advisor. The people selected must be technical experts, should be of the same technical discipline of the proposed UM, and should be familiar with the selection and appointment process. The evaluation panel can confirm the advisor’s recommendation, reduce their authority, or deny the application. The procedures manual should specify any forms used as part of the evaluation panel process.

(e) FAA Review of ODA UM Selection Decisions. The procedures need to include a process for how coordination with the OMT will occur, and what information will be supplied.

Note: This process may be removed for certain ODA types (see 3-16a(4)) via a manual change approved by the OMT when the ODA holder has had sufficient activity in appointing ODA UMs, and successful performance of the process.

(2) ODA Administrator Selection Process. The ODA holder’s procedures manual must contain its ODA administrator selection and approval process and documentation. This process also applies to any additional ODA administrators who will assume responsibilities on behalf of the lead ODA administrator. The procedures must detail how the ODA holder will prepare the request to the FAA which details their proposed ODA administrator’s eligibility and qualifications for administering their ODA.

(3) UM Removal Process. The ODA holder must define processes to remove UMs due to unacceptable ODA-related performance, misconduct, lack of care or judgment, or lack of

k. ODA Training. › (6) FAA Required Training.

integrity. These issues may be identified by the ODA holder’s internal audit program or identified by the OMT.

(a) If any issue is found during the internal audit program, the process must ensure that the FAA is notified by the ODA holder. The procedures need to define what information is documented, how coordination with the OMT will occur, and the required timeframe.

(b) The procedures should detail how the ODA holder will ensure the UM does not perform any further authorized functions and how the UM listing will be updated within 48 hours of initial notification.

k. ODA Training. This chapter in the procedures manual will define the training required for each ODA UM and administrator, the frequency of the applicable training, and how the training records will be managed. The procedures must also define the action(s) that will be taken if training is not successfully completed within the required timeframe; or, as applicable, failure of a test that is part of the required training, regardless of the due date of that training. The types of training include ODA holder-provided training, FAA seminars, and standardization workshops.

(1) ODA Holder-Provided Training. This section must address the content of the ODA holder-provided training, a description of the training delivery format, and the qualifications of those responsible for development and delivery (if applicable) of the training. The organization may define limited or lesser training requirements for staff members performing temporary or limited functions. Such limited UM training should be agreed to by the OMT before the ODA holder provides the training.

(2) ODA Holder’s Authorization and Procedural Training.

(a) Content. The ODA holder’s training must explain the requirements listed in paragraph 3-15.a(1).

(b) Currency. The process should include how the ODA holder will ensure its material is current with the latest applicable FAA regulations, policy, and guidance material.

(3) Equivalent Training. If an ODA holder desires to rely on equivalent training for manufacturing or flight standards functions, it must inform the OMT and develop and conduct the training in accordance with the appropriate standards defined in paragraph 3-15.a(2).

(4) UM Interference Training. This section must address the required content as listed in 3-15.a(3).

(5) Communications Training. See 3-15.a(4).

(6) FAA Required Training. This section must detail how the ODA holder will identify, manage, and document completion of FAA required training for their ODA UMs and administrators. See 3-15.c.

(1) Required Evaluations and Criteria. › (e) The ODA holder may use remote technology for conducting the audit…

(7) Standardization Workshops. This section must detail how the ODA holder will identify, manage, and document completion of this type of training. See 3-15.d.

l. Internal Audit and Performance Assessment Program. The procedures manual must have procedures for the internal audit program which audits the ODA holder’s compliance to approved procedures and evaluates each ODA UM’s performance every calendar year.

(1) Required Evaluations and Criteria. The procedures must include how the ODA holder will determine which criteria from Appendix C of this order are applicable, as well as define any supplemental criteria necessary for additional or unique features of their system. This should result in a master listing of all applicable criteria. The ODA holder may document this master listing in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s System Compliance Surveillance Index (Figure A-13) and the Authorized Function Performance Surveillance Index (Figure A-14) from Appendix A, Sample Forms and Letters, of this order.

(a) The ODA holder must audit their compliance to procedures manual processes using the System Compliance Audit criteria in Appendix C, Delegated Organization Surveillance, Section 2.0, System Compliance Audit, of this order.

(b) The ODA holder must evaluate each UM’s performance using the Authorized Function Performance Assessment criteria in Appendix C, Section 3.0, Authorized Function Performance Assessment, of this order. If an individual is involved in the development of descriptive or substantiating data used as a showing of compliance and also makes any finding of compliance using that same data, it must be identified and sampled for evaluation per 3-26a(2). ODA procedures must clearly define the level of UM involvement that requires identification for sampling.

Note: If applicable, the Authorized Function Performance Assessment should be equivalent to a direct observation, except in terms of frequency, as described in FAA Order 8000.95, based on the ODA UM function performed.

(c) The ODA holder must send an annual solicitation to every UM seeking anonymous feedback regarding interference. At a minimum, the annual solicitation must ask UMs if they are aware of, or have been subjected to, any unreported interference.

(d) As a part of the annual internal audit, an ODA holder must review all reports of alleged interference that occurred during the evaluation period of the internal audit and submit to the OMT an interference annual report that includes a summary of the interference reports, including those determined not to be interference, and any resulting indicators, patterns of actual or potential interference, and system improvements that have been made or are needed.

(e) The ODA holder may use remote technology for conducting the audit and evaluations that are traditionally conducted in person or onsite. In some cases, remote technology may not be a complete replacement for an in person or onsite activity but may be used in combination with an in person or onsite activity. The process for using remote technology must be documented in the ODA procedures manual and the procedures should describe:

(4) Documenting the Evaluations and Results. › (a) System Compliance Audit Record.

1. How the remote technology will be used in real time (not pre-recorded) so that the auditor may direct the audit as if conducted in-person, on-premises, with the aid of the equipment or the personnel supporting the audit at the remote location.

2. The final decision on the acceptability of using remote technology resides entirely with the auditor tasked with conducting the audit.

3. How the use of remote technology will be documented on the internal audit records.

(2) Audit Staff. The ODA holder is responsible for providing qualified staff to conduct the required evaluations.

(a) Audit Staff Qualifications. The procedures manual must define the audit staff qualifications. To be qualified to perform the following audits:

1. System Compliance Audit. At a minimum, the auditors must have taken the ODA holder-provided training (see paragraph 3-15).

2. Authorized Function Performance Assessment. The auditors must meet the UM qualifications outlined in paragraph 3-3.

(b) Auditor Assignments. The procedures manual must include the process to define auditor assignments. The process must ensure that the auditor is independent of the activity being evaluated.

(3) Audit Plan and Schedule. The procedures manual must define how the ODA holder will develop an appropriate audit plan to complete the system compliance evaluations and authorized function performance evaluations on the master listing within each calendar year. The audit plan must include the required evaluation items, the assigned audit staff, and an audit schedule. The process must also include how the audit plan will be approved by the ODA administrator.

(4) Documenting the Evaluations and Results. The ODA holder’s procedures manual must include how to document the required evaluations and any results. The documentation must include a combination the following information:

(a) System Compliance Audit Record. The ODA holder may document the required system compliance evaluation information outlined below in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s System Compliance Audit Form (Figure A-16). If the ODA holder chooses to adjust the System Compliance Audit Form, then the instructions and definitions must be revised to reflect the revised form. The required information includes:

• Auditor Name. • Date. • System element. • Evaluation item number.

(4) Documenting the Evaluations and Results. › (c) Noncompliances from System Compliance Audits.

• Manual process audited. • Result: o Compliant, o Noncompliant, or o Not Exercised. • Opportunity for Improvement (OFI) (if applicable). • Attachments: o Audit Finding Record number(s) (if the result is noncompliant). o Opportunity for Improvement Record (OFIR) number(s) (if applicable).

(b) Authorized Function Performance Assessment Record. The ODA holder may document the required assessment information outlined below in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s Authorized Function Performance Assessment Form (Figure A-17). If the ODA holder chooses to adjust the Authorized Function Performance Assessment Form, then the instructions and definitions must be revised to reflect the revised form. The required information includes:

• Auditor name. • UM name. • Discipline being assessed. • Date. • Authorized function. • Result: o Satisfactory, o Unsatisfactory, or o Not Exercised. • OFI (if applicable). • Attachments: o Audit Finding Record number(s) (if the result is unsatisfactory). o OFIR number(s) (if applicable).

(c) Noncompliances from System Compliance Audits. The ODA holder may document the required noncompliance information below in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s ODA Oversight Finding Record (Figure A-18).

Note: The term “non-systemic” replaces the term “isolated” which legacy systems may continue to use.

• Auditor name. • Date. • Audit Finding Record number. • System element. • Required condition. o For System Compliance Audits, this is the process that was audited.

(4) Documenting the Evaluations and Results. › (e) OFI.

• Encountered condition. o For System Compliance Audits, this would include a description of how

the ODA holder was not in compliance with the approved procedures. • Frequency determination: o Non-systemic, or o Systemic. • Potential unsafe condition: o Yes, or o No. • Attachments.

(d) Unsatisfactory Performance from Authorized Function Performance Assessments. The ODA holder may document the required performance information below in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s ODA Oversight Finding Record (Figure A-18).

• Auditor name. • Date. • UM Audited. • Audit Finding Record number. • Authorized function. • Discipline of the UM being audited. • Required condition. o The performance expectation for that function from Appendix C, Section

3.0, of this order. • Encountered condition. o This is a description of how the ODA unit did not meet the performance

expectation. • Frequency determination: o Non-systemic, or o Systemic. • Potential unsafe condition: o Yes, or o No. • Attachments.

(e) OFI. The ODA holder must document the OFI information below in a format acceptable to the OMT, provided the form/format is contained in appendix E of the procedures manual. Otherwise, the ODA holder may use or adapt the FAA’s Opportunity for Improvement Record (OFIR) (Figure A-19).

• Auditor name. • Date. • OFIR number. • Surveillance type:

3-5. Procedures Manual Content. › p. Inspection.

o System Compliance Audit, or o Authorized Function Performance Assessment. • Observation (encountered condition). • Improvement recommendation. • Attachments.

(5) Internal Audit Reporting. The procedures manual must define how the ODA holder will compile the internal audit report. The ODA holder must define timeframes acceptable to the OMT on when the internal audit report will be submitted to the ODA administrator, and how often the report will be sent to the FAA. The internal audit report, at a minimum, must include a summary that details the internal audit activities completed, the corresponding dates, and a list of the noncompliances and performance issues identified. The report must include the System Compliance Audit records and Authorized Function Performance Assessment records from 3-5l(4)(a) through 3-5l(4)(d) generated from the audit. The ODA holder must retain all documentation and attachments generated during the internal audit, provide accurate references to the documentation in the audit report, and allow the OMT to inspect the referenced documentation and attachments at any time and for any reason. This report may be written or electronic, provided that the ODA holder and OMT agree on the method.

Note: An eligible ODA holder may voluntarily disclose certain 14 CFR Part 183 noncompliances in accordance with the Voluntary Disclosure Reporting Program (VDRP) described in FAA Order 2150.3, FAA Compliance and Enforcement Program. Information accepted by the FAA in accordance with the VDRP is protected from release to the public under 14 CFR Part 193.

m. Regulations and Guidance Material. These procedures must describe how the organization will stay apprised of changes to FAA policies and regulations and how those changes will be communicated to the ODA UMs.

n. Duration of Authorization. The ODA issued under 14 CFR § 183.45 is effective until the expiration date listed on the Letter of Designation and is not transferable. The FAA Administrator may terminate or suspend the ODA at any time for any reason, including those identified in 14 CFR § 183.67.

Continue reading ↓ 120 of 1104 passages shown