Order 8100.15A Organization Designation Authorization Procedures
This document is cancelled. Cancelled by 8100.15B. Check the official source before relying on it.
Text read by OCR from a scanned file (2 of 293 pages). Check the original, as some words may be misread.
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
National Policy
SUBJ: Organization Designation Authorization Procedures
ORDER HIOO.15A
611 0/201 1
This order establishes the procedures, guidance, and limitations of authority we, (the Federal Aviation Administration, or FAA) grant to an organization under the Organization Designation Authorization (ODA) program. This order offers guidance to help designated organizations understand what we may authorize them to do, and the procedures they must follow.
-vv... .. ~ Mar~an~- Associate Administrator for Aviation Safety
Table of Contents
Chapter 1. Introduction
1-1. Purpose … 1 1-2. Audience … 1 1-3. Where Can I Find This Order? … 1 1-4. Explanation of Policy Changes … 1 1-5. Explanation of Policy Changes … 1 1-6. Effective Date … 2 1-7. General … 2
Chapter 2. Program Overview
2-1. FAA Appointment of ODAs … 3 2-2. Eligibility for ODA … 3 2-3. Meaning of ODA Holder and ODA Unit … 3 2-4. Types of ODAs … 3 Figure 2-1. ODA Functions … 5 Figure 2-2. Airworthiness Certificate and Approval Functions … 6 Figure 2-3. Operational Approval Functions … 7 2-5 Multiple ODA Types … 7 2-6. Organization Management Team … 7 2-7. Certification Activity … 7
Chapter 3. Qualifications, Responsibilities, and Authority
3-1. Granting an ODA … 8 3-2. Reducing Designees … 8 3-3. ODA Holder Location … 8 3-4. ODA Holder Qualifications … 8 3-5. ODA Staff Qualifications … 9 3-6. Responsibilities … 12 3-7. Memorandum of Understanding … 13 3-8. Authority and Functions … 13 3-9. Procedures Manual … 14 3-10. Training … 16 3-11. Duration of Appointments … 17 3-12. Continued Eligibility … 17 3-13. Selection and Appointment of ODA Unit Members … 18 Figure 3-1. ODA Unit Member Selection Processs … 19 3-14. Self-Audit … 21 3-15 Self-Disclosure … 22 3-16 Work Activity Reports … 22 3-17. Records … 23 3-18. Data Review and Service Experience … 24 3-19. Corrective Action … 24
iii
3-20. Activity Outside The United States … 25 3-21. Use of FAA Forms … 26 3-22. Inspection Unit Members at Suppliers … 25
Chapter 4. Application, Selection and Appointment
4-1. Pre-Application Communication … 27 Figure 4-1. Appointing/Managing Offices … 27 4-2. Application … 28 4-3. Selection Process … 29 4-4. Appointment … 32
Chapter 5. Oversight
5-1. Oversight Program … 34 5-2. Organization Management Team (OMT) … 34 5-3. Supervision Overview … 35 5-4. Supervision … 37 5-5. Delegated Organization Inspection Program … 41 5-6. Corrective Action … 41 5-7. Geographical Coordination … 44 5-8. ODA Renewal … 44
Chapter 6. Delegated Organization Inspection Program
6-1. Inspection Program Overview … 46 6-2. Responsibilities … 46 6-3. Inspection Scheduling … 47 6-4. Inspection Planning … 48 6-5. Performing the Inspection … 50 6-6. Post-Inspection Activity … 52 Figure 6-1. Inspection Disagreement Resolution Flow Chart … 54
Chapter 7. Suspension and Termination of an ODA
7-1. General … 55 7-2. Cause for Suspension or Termination of ODAs … 55 7-3. Coordination of Suspension or Termination Decisions … 56 7-4. Notification of Suspension or Termination … 56 7-5. Appeal Procedures … 57 7-6. Surrender of Records … 58 7-7. Additional Information on Suspension or Termination of AKT ODA … 58 7-8. DIN Status … 60
Chapter 8. Type Certification Functions
8-1. General … 61 8-2. Eligibility … 61
iv
8-3. Functions … 61 8-4. Limitations … 63 8-5. Records … 64 8-6. Type Certification Programs … 65 8-7. Off-Site Project Requirements … 73 8-8. Other Off-Site and International Activities … 76 8-9. Approval of Major Alteration or Major Repair Data … 77 8-10. Approvals of AMOC to AD and AD Mandated Repairs … 77 8-11. Global AMOCs for Revisions to Service Bulletin … 79 8-12. Airworthiness Certification … 80 8-13. Special Flight Permits … 80 8-14. Special Considerations-Military Commercial Derivative Aircraft (MCDA) … 81 8-15. Data Approvals Supporting FAA Managed Projects … 82 8-16. Procedures Manual Requirements … 82
Chapter 9. Production Certification Functions
9-1. General … 87 9-2. Eligibility … 87 9-3. Functions … 87 9-4. Limitations … 89 9-5. Records … 89 9-6. Production Certificate and PLR Changes … 90 9-7. TC/STC Conformity … 91 9-8. Airworthiness Certificates … 92 9-9. Special Flight Permits … 92 9-10. Export Airworthiness Approvals … 93 9-11. Procedures Manual Requirements … 93
Chapter 10. Technical Standard Order Authorization Holder Functions
10-1. General … 95 10-2. Eligibility … 95 10-3. Functions … 95 10-4. Limitations … 95 10-5. Records … 96 10-6. Conformity Functions … 96 10-7. Airworthiness Approvals … 96 10-8. Procedures Manual Requirements … 97
Chapter 11. Supplemental Type Certification Functions
11-1. General … 98 11-2. Eligibility … 98 11-3. Functions … 98 11-4. Limitations … 101 11-5. Records … 102
v
11-6. Alteration Locations … 102 11-7. Supplemental Type Certification Programs … 103 11-8. Off-Site Project Requirements … 111 11-9. Off-Site Prototype Installations on Commercial Derivative Public Use Military Aircraft … 114 11-10. Other Off-Site and International Activities … 114 11-11. STC Projects Involving Foreign-Registered Aircraft or Foreign State of Design Products … 115 11-12. Finding Compliance With Foreign Regulations … 115 11-13. Other Approval Functions … 116 11-14. Airworthiness Certification … 116 11-15. Special Flight Permits … 117 11-16. Special Considerations-Military Commercial Derivative Aircraft (MCDA) … 117 11-17. Procedures Manual Requirements … 118
Chapter 12. Major Repair, Major Alteration, and Airworthiness Functions
12-1. General … 121 12-2. Eligibility … 121 12-3. Functions … 121 12-4. Limitations … 123 12-5. Records … 123 12-6. Approving Major Alteration or Major Repair Data … 124 12-7. Airworthiness Certification … 125 12-8. Special Flight Permits … 125 12-9. Activity Outside Geographic Area … 129 12-10. Procedures Manual Requirements … 126
Chapter 13. Parts Manufacturer Approval Functions
13-1. General … 128 13-2. Eligibility … 128 13-3. Functions … 129 13-4. Limitations … 131 13-5. Records … 132 13-6. PMA Test and Computation Approvals … 132 13-7. PMA Approvals Based on Licensing Agreement or STC … 137 13-8. Other Engineering Approval Functions … 139 13-9. Airworthiness Approvals … 140 13-10. Conformity Determinations … 141 13-11. Data Review and Service Experience … 141 13-12. Procedures Manual Requirements … 141
Chapter 14. Airman Knowledge Testing (AKT) Functions
14-1. General … 144 14-2. Eligibility … 144
vi
14-3. Functions … 149 14-4. Limitations … 149 14-5. Records … 150 14-6. Procedures Manual Requirements … 150
Chapter 15. AIR Operator (AO) Certification Functions
15-1. General … 151 15-2. Eligibility … 151 15-3. Rotorcraft External-Load Operator Certification Functions … 151 15-4. Limitations … 152 15-5. Records … 152 15-6. Certification Programs … 153 15-7. Procedures Manual Requirements … 154
Chapter 16. Designee Information Network
16-1. Keeping the Designee Information Network Up To Date … 155 16-2. Designation Form … 155 16-3. ODA Numbers … 155 16-4. Status Definitions … 155
Appendix A. Sample Forms and Letters (34 pages)
Figure 1. Sample FAA Form 8100-13 ODA Statement of Qualifications … A-1 Figure 2. Sample ODA Application Checklist … A-2 Figure 3. Sample ODA Letter of Designation … A-3 Figure 4. Sample ODA Denial Letter … A-4 Figure 5. Sample FAA Form 8100-9 Used for ODA STC Data Approval … A-5 Figure 6. Sample FAA Form 8100-9 Used for ODA Data Approval … A-6 Figure 7. Sample FAA Form 8100-9 Used for TC ODA Approval In Support of
STC … A-7 Figure 8. Sample FAA Form 8100-9 Used for TC ODA Repair
Data Approval … A-8 Figure 9. Sample FAA Form 8100-9 Used for MRA ODA
Compliance Finding … A-9 Figure 10. Sample Summary Activity Report … A-10 Figure 11. Sample FAA Form 8100-11, Statement of Completion … A-12 Figure 12. Sample FAA Form 8100-12 Production Limitation … A-13 Figure 13. Sample ODA Supervision Record … A-15 Figure 14. Sample Memorandum of Understanding … A-17 Figure 15. Sample Conformity Inspection Plan … A-20 Figure 16. Sample Inspection Notification Letter … A-24 Figure 17. Sample Inspection Discrepancy Record … A-25 Figure 18. Sample Inspection Report Cover Sheet … A-28 Figure 19. Sample Inspection Survey Sheet … A-29 Figure 20. Sample Inspection Report Transmittal Letter … A-31
vii
viii
Figure 21. Sample PMA Supplement Licensing … A-32 Figure 22. Sample PMA Supplement Test and Computations … A-33 Figure 23. Sample PMA Supplement STC … A-34 Figure 24. Sample PMA Supplement All Types … A-34
Appendix B. Sample ODA Procedures Manual (16 pages)
Appendix C. Standardized Technical Evaluation Criteria (66pages)
Appendix D. Certification Plans (TC and STC ODAs) (2 pages)
Appendix E. Related FAA Publications (2 pages)
Appendix F. Definitions (3 pages)
Appendix G. Acronyms (3 pages)
Appendix H. Administrative Information (1 page)
H-1. Distribution … H-1 H-2. Authority to Change This Order … H-1 H-3. Deviations … H-1 H-4. Records Management … H-1 H-5. Directive Feedback … H-1
Appendix G. FAA Directive Feedback Form (1 page)
6/10/2011 Order 8100.15A
Chapter 1. Introduction
1-1. Purpose. This order outlines the Federal Aviation Administration's (FAA) Organization Designation Authorization (ODA) program. Under this program, we can delegate certain types of authority to organizations. This order addresses how to qualify, appoint, and oversee organizations in the ODA program. 1-2. Audience. We wrote this order for Aircraft Certification Service (AIR) and Flight Standards Service (AFS) personnel who manage delegated organizations. We also wrote this order for organizations granted an ODA to act on the FAA's behalf. 1-3. Where Can I Find This Order? You can find this order at MYFAA Employee website: https://employees.faa.gov/tools_resources/orders_notices, http://www.faa.gov/regulations_policies/orders_notices/ and on the Regulatory and Guidance Library (RGL) website: http://rgl.faa.gov. 1-4. Explanation of Policy Changes.
a. This order makes the following changes:
(1) Incorporates ODA programs for the issuance of Rotorcraft External-Load Operator Certificates (Air Operator ODA) and administration of Airman Knowledge Testing (AKT ODA).
(2) Provides for the delegation of review and acceptance of instructions for continued airworthiness by certain ODA types.
(3) Allows engineering unit members additional capability to approve engineering data in support of FAA managed major alterations and repairs.
(4) Incorporates the repair specification process.
(5) Requires Military Certification Office (MCO) coordination for projects involving military commercial derivative aircraft.
(6) Allows qualified supplemental type certificate (STC) and parts manufacturer approval (PMA) ODA holders to approve data for major repairs and/or major alterations.
b. This revision also addresses:
(1) Policy and regulation updates.
6/10/2011 Order 8110.15A
(2) Improvements identified since the order was originally issued. 1-5. Effective Date. This order is effective August 9, 2011. Airman knowledge testing and air operator ODA appointments can be granted in accordance with this order following the signed release of this order. Changes to an ODA procedure manual resulting from revisions to this order, must be submitted on or before December 7, 2011. For example, ODA holders which use designated engineering representative (DERs) to perform functions that are now available under the ODA program have until December 7, 2011 to add those DERs to their unit member staff. The managing aircraft certification office (ACOs) must take action after December 7, 2011 to terminate those DERs that are no longer required. 1-6. General.
a. Under Title 49 of the Code of Federal Regulations (49 CFR) § 44702(d), the FAA may delegate to a qualified private person a matter related to issuing certificates, or related to the examination, testing, and inspection necessary to issue a certificate on behalf of the FAA Administrator as authorized by statute to issue under 49 CFR § 44702(a).
b. We established the ODA program in Title 14 of the Code of Federal Regulations (14 CFR) part 183, subpart D, which addresses all FAA delegations to organizations.
c. Because some ODAs involve both AIR and AFS functions, AIR and AFS personnel must work simultaneously or in coordination with each other to oversee these ODAs.
d. The ODA program does not affect how we delegate authority to individuals under 14 CFR part 183, subparts A through C. However, organizations with an ODA must use ODA authority if available, rather than individual designees.
Chapter 2. Program Overview 2-1. FAA Appointment of ODAs. We may not grant an ODA to every qualified applicant. We will only grant ODAs when we determine the following:
a. The organization's FAA workload is large enough to warrant approval; b. The FAA will benefit from granting the ODA; and c. We have the resources available to manage the authorization.
2-2. Eligibility For ODA. Any organization consisting of two or more individuals may apply for an ODA. However, every organization is not eligible for every ODA type. For some ODA types, the organization must be a certificate holder or meet specific eligibility requirements. For example, only a PMA holder can get a PMA ODA. 2-3. Definition of ODA Holder and ODA Unit. An ODA holder is the organization to which we grant the ODA. It may be a certificate holder, such as a repair station or aircraft operator, or a consultant group. The ODA unit is the group of individuals (at least two) within the ODA holder that perform the authorized functions. For consultant groups, the ODA holder may consist entirely of the ODA unit. In this order, some requirements apply specifically to the ODA holder, others to the unit. The ODA holder is responsible for administering the ODA unit, and ensuring all requirements of this order are met. 2-4. Types of ODAs. There are eight types of ODA programs. Each type has a chapter in this order that addresses qualifications and functions. To perform functions available to a certain ODA type, organizations must meet certain eligibility requirements. These organizations, when performing delegated functions, must follow all applicable FAA regulations and policies appropriate to those functions. See figures 2-1, 2-2 and 2-3 of this order for an overview of the available functions. Other types of ODA programs may be added by the appropriate headquarters policy office by future changes to this order.
a. Type Certification ODA (TC ODA). A type certificate (TC) ODA holder may manage and make findings for type certification programs. In addition to the engineering and manufacturing approvals that are part of the certification program, a TC ODA holder may issue airworthiness certificates, but may not issue an original TC or amended TC. A TC ODA is available to organizations holding a TC issued by the FAA.
b. Production Certification ODA (PC ODA). A production certificate (PC) ODA holder may issue airworthiness certificates and approvals, determine conformity, perform evaluation leading to amendment of its production limitation record, and approve minor changes to its quality control manual. To qualify for a PC ODA, an applicant must be an existing PC holder, or have applied for a TC and PC.
c. Supplemental Type Certification ODA (STC ODA). Holders of a STC ODA may develop and issue STCs and related airworthiness certificates. An STC ODA is intended primarily for repair stations, operators, and manufacturers, but consultant groups with the required knowledge and experience may also qualify for an STC ODA.
d. Technical Standard Order Authorization Holder ODA (TSOA ODA). Holders of a technical standard order authorization (TSOA) ODA may issue airworthiness approvals and determine conformity of articles, test articles and test set-ups in support of FAA managed TC or STC projects. Only existing technical standard order (TSO) authorization holders qualify for a TSOA ODA.
e. Major Repair, Alteration, and Airworthiness ODA (MRA ODA). Holders of an major repair, alteration, and airworthiness (MRA) ODA may approve data for major repairs and alterations, issue airworthiness certificates and approvals, and perform aging aircraft inspections and records reviews. Repair stations, operators, and consultant groups are eligible for an MRA ODA.
f. Parts Manufacturer Approval ODA (PMA ODA). Holders of this ODA may issue PMA supplements based on test and computation approvals, STCs, or licensing agreements. Only existing PMA holders qualify for this ODA type.
g. Airman Knowledge Testing ODA (AKT ODA). Holders of this ODA type are responsible for testing center personnel and facility management, administration and delivery of airman knowledge tests, and issuance of airman knowledge test reports (AKTR) to airman applicants. The AKT ODA managing office is the Airman Testing Standards Branch (AFS-630), located in Oklahoma City, Oklahoma. AKT ODA must be reviewed, approved, and authorized by this office.
h. Air Operator ODA (AO ODA). An air operator (AO) ODA holder may conduct certification or portions of the certification process towards issuance of a Rotorcraft External- Load Operator Certificate. ODAs for operational certifications may be expanded in future revisions of this order to include additional air operator, airman, air carrier, or air agency certification functions. An AO ODA is intended primarily for consultant groups, but experienced certificated operators may also qualify.
Figure 2-1. ODA Functions.
AVAILABLE FUNCTIONS
CHAP 8 TC ODA
CHAP 9 PC ODA
CHAP 10
TSOA
ODA
CHAP 11 STC ODA
CHAP 12
MRA ODA
CHAP 13
PMA ODA
CHAP 14 AKT ODA
APPROVE TECHNICAL DATA AND FIND COMPLIANCE TO THE AIRWORTHINESS
STANDARDS
8010 E 11010 E 13010 E
ISSUE STCS and/or AMENDMENTS 11020 E
ISSUE and REVISE PMA SUPPLEMENTS
BASED ON TEST AND COMPUTATIONS 13031 M
BASED ON LICENSING AGREEMENT OR
STC 13032 M
APPROVE OPERATIONAL AND REPAIR
INFORMATION 8040 E 11040 E 12040 E 13040 E
APPROVE AIRWORTHINESS LIMITATIONS
INFORMATION 8050 E 11050 E 12050 E 13050 E
ISSUE AIRWORTHINESS CERTIFICATES &
APPROVALS See figure 2-2 for Airworthiness Functions
ESTABLISH CONFORMITY INSPECTION
REQUIREMENTS 8070 E 9070 M 11070 E 13070 E, M
DETERMINE CONFORMITY OF ARTICLES
INCLUDING PARTS & TEST ARTICLES 8080 M 9080 M 10080 M 11080 M 13080 M
DETERMINE CONFORMITY OF TEST
SETUP 8090 M 9090 M 10090 M 11090 M 13090 M
DETERMINE CONFORMITY OF INSTALLATIONS OF ARTICLES, INCLUDING TIA INSPECTIONS ON A
PRODUCT
8100 M 9100 M 11100 M 13100 M
PERFORM COMPLIANCE INSPECTIONS 8110 E 11110 E 13110 E
EVALUATE PRODUCTION LIMITATIONS RECORD , PC AND PROCESS CHANGES 9120 M
APPROVE DATA FOR MAJOR ALTERATIONS AND/OR MAJOR REPAIRS 8130 E 11130 E 12130 E 13130 E
PERFORM AGING AIRCRAFT INSPECTIONS AND RECORDS REVIEWS 12140 O
APPROVE MINOR CHANGES TO QUALITY
CONTROL MANUAL/PROCEDURES 9150 M
PERFORM APPROVALS IN SUPPORT OF
OTHER TC ODA HOLDER PROJECTS 8160 11160 13160
ISSUE FAA FORM 8130-31, STATEMENT OF CONFORMITY - MILITARY AIRCRAFT 8170 M 9170 M 11170 M
PERFORM REVIEW AND ACCEPTANCE OF
INSTRUCTIONS FOR CONTINUED
AIRWORTHINESS (ICA)
8180 A 11180 A 13180 A
Legend: Primary FAA Office – A=Aircraft Evaluation Group; E=Aircraft Certification Office;
M=Manufacturing Inspection District Office; and O=Flight Standards District Office
Note: For function code descriptions and additional clarification, see specific chapters. Underlined codes are available to consultant group organizations.
Figure 2-2 Airworthiness Certificate and Approval Functions
AVAILABLE FUNCTION CODES
CHAP 8 TC ODA
CHAP 9 PC ODA
CHAP 10 TSO ODA
CHAP 11 STC ODA
CHAP 12 MRA ODA
CHAP 13 PMA ODA
CHAP 14 AKT ODA
ISSUE STANDARD/AMENDED AIRWORTHINESS CERTIFICATES 8061 M 9061 M 11061 M 12061 O
ISSUE SPECIAL AIRWORTHINESS CERTIFICATES 8062 M 9062 M 11062 M 12062 O
ISSUE DOMESTIC AIRWORTHINESS APPROVALS 9063 M 10063 M 12063 O 13063 M
ISSUE EXPORT APPROVALS 9064 M 10064 M 12064 O 13064 M
ISSUE EXPORT APPROVALS 9065 M 12065 O
ISSUE SPECIAL FLIGHT PERMITS 8066 M 9066 M 11066 M 12066 O
ISSUE SPECIAL AIRWORTHINESS CERTIFICATES
FOR PRIMARY CATEGORY
AIRCRAFT
9067 M 11067 M
ISSUE SPECIAL AIRWORTHINESS CERTIFICATES
FOR RESTRICTED CATEGORY
AIRCRAFT
9068 M 11068 M 12068 O
ISSUE PROVISIONAL AIRWORTHINESS CERTIFICATES 9069 M
ISSUE REPLACEMENT FOR A LOST, STOLEN, OR MUTILATED
STANDARD OR SPECIAL AIRWORTHINESS CERTIFICATE
110610 M
120610 O
DELIVERY OF AIRMAN
KNOWLEDGE TESTS
1401S
Legend: Primary FAA Office – M=MIDO; O=FSDO and S=AFS-630
Note: For function code descriptions and additional clarification, see specific chapters. Underlined codes are available to consultant group organizations.
Figure 2-3 Operational Approval Functions
AVAILABLE FUNCTION CODES
CHAPTER 15
AO ODA
REVIEW ELIGIBILITY 15010 O
EVALUATE RLCFM 15020 O
ADMINISTER CHIEF PILOT TESTS 15030 O
ADMINISTER FLIGHT CHECKS 15040 O
VERIFY AIRWORTHINESS 15050 O
CONDUCT BASE INSPECTION 15060 O
ISSUE OPERATING CERTIFICATE 15070 O
Legend: Primary FAA Office – O=FSDO 2-5. Multiple ODA Types. An organization that seeks an ODA may apply for as many types of ODA for which it qualifies. We will only issue one ODA letter of designation, and assign one ODA number. Organizations with multiple ODA types will usually be required to address all ODA types within a single procedures manual. An organization may have separate procedures manuals for each type of ODA, only if required by the FAA. 2-6. Organization Management Team. The organization management team (OMT) is the group of FAA personnel responsible for oversight of the ODA holder. See paragraph 5-2 of this order for information about OMTs. 2-7. Certification Activity. Organizations that are not eligible for or do not want an ODA may continue to use standard certification procedures, including individual designees. Organizations with ODAs are expected to complete all projects possible using ODA authority, but may continue using standard certification procedures for projects or functions not authorized under the ODA. All approval functions needed for project work must be accomplished by the organization's ODA unit members unless the use of other approvals is provided for in this order.
(1) The ODA administrator must ensure that the organization performs…
Chapter 3. Qualifications, Responsibilities, and Authority
3-1. Granting an ODA. This chapter outlines the general ODA eligibility and qualification requirements. It also explains the general requirements and limitations that apply to all ODAs. We address the specific requirements for the various types of ODAs in chapters 8 through 15 of this order. 3-2. Reducing Designees. The designee system leverages the FAA's resources by authorizing individuals and organizations to perform functions for the agency. Managing organizations is more efficient for the FAA than managing the activity of many individual designees. We expect an ODA applicant that employs individual designees to significantly reduce the number of designees for the type of ODA functions it seeks. An ODA holder may retain individual designees to operate under standard procedures, if the needed functions are not available under the ODA program. 3-3. ODA Holder Location. Each ODA holder must be located in the United States. However, ODA unit members may be located apart from the ODA holder's facility if agreed to by the OMT. An ODA holder may appoint ODA unit members in another country only after the OMT decides the ODA unit member's location poses no undue burden on the FAA. The ODA unit member must attend all required training, and meet with the OMT yearly if required by the OMT. An AO ODA holder may not be appointed nor perform functions outside the United States. 3-4. ODA Holder Qualifications. Every applicant must meet the qualifications in this paragraph as well as the eligibility requirements in chapters 8 through 15 of this order for the specific type of ODA requested:
a. Integrity. The applicant's management, its ODA administrator, and the proposed ODA unit members must possess demonstrated integrity in their experience with the FAA.
b. Organizational Model. One key to the success of the ODA system is that the ODA holder's executive management fully supports the ODA unit. The ODA unit also must be free to do its duties. The organizational model for ODAs will vary significantly depending on the ODA holder's functions, size, and corporate structure. The model must meet the following:
(1) The ODA administrator must ensure that the organization performs all authorized functions in accordance with the regulations and applicable FAA policy. (Terms used in this order, such as "ODA administrator," are defined in appendix E of this order.) The ODA administrator must also ensure that the organization always complies with its ODA procedures manual. The ODA administrator must be in a position that provides authority to act in the FAA's interest.
(2) Comprehensive knowledge of FAA regulations, policies, and…
(2) Each ODA unit member must be in a position that provides enough authority and time to perform duties without pressure or influence from other parts of the organization.
(3) An ODA unit member must have no conflicting restraints while performing authorized functions. Additionally, an ODA unit member must not have responsibilities that conflict with those of the ODA unit.
c. Experience. Each applicant must have experience and a thorough working knowledge of the FAA regulations, methods of compliance, policy, processes, and procedures applicable to the authorized functions sought. Additionally, applicants seeking a TC, STC, or PMA ODA must have a recent and successful history performing certification work and have completed projects as an organization. For these ODA types, newly formed organizations must complete projects under standard procedures in order to be eligible for ODA even if the ODA members are experienced individuals. An applicant for type and production certificates may be appointed as a PC ODA if it is expected to obtain a production certificate. Each applicant for AO ODA functions must have the ability to manage operator certification projects.
d. Resources. Each applicant must have sufficient administrative and technical resources to satisfy all the requirements of the requested authorization. It must employ an ODA administrator and have available an ODA unit consisting of the appropriate personnel capable of performing the authorized functions. Except for the lead administrator, an ODA unit may consist solely of individuals who are not employed full time by the organization.
e. Facilities. Each ODA holder's primary facilities must be in the United States. The facilities must be appropriate for the ODA sought, as detailed in chapters 8 through 15 of this order.
3-5. ODA Staff Qualifications. Qualifications for the ODA administrator and ODA unit are as follows:
a. ODA Administrator. The ODA administrator must have technical experience with the functions performed under the ODA and a broad range of management experience. This experience must enable the ODA administrator to manage the entire ODA unit activities effectively. The following are the minimum requirements for an ODA administrator:
(1) At least five years of working experience with the FAA on projects similar to those authorized under the ODA. This experience must include various levels of technical airworthiness responsibilities and experience (for example, compliance engineer, quality assurance inspector, manufacturing inspector, or airworthiness inspector) or technical operations responsibilities and experience (for example. director of operations, chief pilot, safety manager, or operations inspector). The ODA administrator must also have management experience in one or more technical disciplines such as, engineering, manufacturing, airworthiness, maintenance, quality assurance, or operations.
(2) Comprehensive knowledge of FAA regulations, policies, and procedures applicable to the ODA functions.
(2) Qualification Requirements for an ODA Unit Member Making Findings…
(3) Demonstrated sound judgment and integrity.
(4) Sufficient technical knowledge, training, skill, and experience for the type of ODA sought. An ODA administrator need not be qualified to perform all authorized functions but must possess at least a basic understanding of all of the functions performed.
(5) The lead ODA administrator must be a full-time employee of the ODA holder. Alternate ODA administrators need not be full-time employees, but must meet all ODA administrator qualification requirements.
(6) In addition, AKT ODA administrators must:
(a) Have a good reputation and record in the industry and community for integrity and dependability.
(b) Have a willingness to serve the aviation community.
(c) Have a history of cooperation with the FAA (if applicable).
(d) Be at least 21 years of age.
(e) Be citizens or legal resident aliens of the United States (except for locations outside the United States).
(f) Know and understand AKT authorization requirements. (g) Know computer uses as they relate to the AKT Program. (h) Be knowledgeable in the structure, processing, and transmission of applicant data.
(i) Must know and understand the English language.
b. Engineering and Flight Test ODA Unit Members.
(1) An engineering or flight test ODA unit member must meet the qualifications for a DER. We define these qualifications in FAA Order 8100.8, Designee Management Handbook. The ODA unit members need to meet only those requirements for the functions and areas they will perform. However, the requirement to have direct working experience with the FAA may be satisfied by having direct working experience within an ODA holder's or other delegated organization.
(2) Qualification Requirements for an ODA Unit Member Making Findings to Foreign Requirements. The OMT may authorize an ODA holder to make findings of compliance with foreign regulations in support of TC or STC validation programs. Each ODA unit member authorized to make such findings must thoroughly understand the foreign
(e) Be citizens or resident aliens of the United States (except for…
requirements and be knowledgeable of their application. This knowledge typically will be evidenced by participation on previous validation programs with the foreign authority and the FAA. The ODA unit member listing must identify, for each ODA unit member, the foreign requirements to which the ODA unit member is authorized to make findings.
c. Manufacturing and Maintenance ODA Unit Members.
Each ODA unit member performing airworthiness, conformity, production or maintenance inspections must meet the qualifications to perform those inspections in FAA Order 8100.8. However, the requirement to have direct working experience with the FAA may be satisfied by having direct working experience within an ODA holder's or other delegated organization.
(2) Each ODA unit member determining conformity of installations must have five years of experience performing conformity inspections of installations on a product.
(3) Each ODA unit member performing type inspection authorization (TIA) inspections must have five years of experience inspecting aircraft systems installations and be able to determine airworthiness of the aircraft before flight testing.
(4) Each ODA unit member performing TIA inspections involving weight and balance of aircraft must have knowledge of weight and balance practices described in FAA Advisory Circular (AC) 120-27, Aircraft Weight and Balance Control.
(5) Each ODA unit member determining conformity of compliance test setups must have two years of experience performing conformity inspections of compliance test setups.
d. AKT Unit Members.
(1) Each AKT unit member must meet the qualifications listed in the ODA holder’s procedures manual and paragraph 3-13 of this order. In addition, each AKT Unit Member must:
(a) Have a good reputation and record in the industry and community for integrity and dependability.
(b) Have a willingness to serve the aviation community.
(c) Have a history of cooperation with the FAA.
(d) Be at least 21 years of age.
(e) Be citizens or resident aliens of the United States (except for locations outside the United States).
Note: A foreign national may be appointed as an ODA unit member at a location outside the United States. A foreign national may NOT be appointed as an ODA unit member at a location in the United States.
(2) Each AO ODA unit member administering pilot knowledge and skill…
(f) Know policies and requirements outlined in this order.
(g) Know airman knowledge test authorization requirements.
(h) Know computer uses as they relate to the AKT Program.
(i) An individual FAA designee must not conduct or monitor any portion of a computer knowledge test.
Note: Former FAA employees must undergo and/or comply with the same approval, background check, training, and oversight processes as any other ODA unit members. e. Air Operator ODA Unit Members.
(1) An AO ODA must consist of unit members who have experience in all aspects of the applicable operational certification functions. Each AO ODA unit member must have at least two years of experience working for an AO certificate holder(s) of the same type.
(2) Each AO ODA unit member administering pilot knowledge and skill testing, observing operational flight checks, approving operating manuals and training programs, or conducting base inspections must hold the appropriate certificates and ratings similar to those required for an FAA aviation safety inspector (operations) conducting the same functions. The unit member must also have three years of experience as a pilot in the same type of operation or as an FAA inspector (operations).
(3) Each AO ODA unit member conducting airworthiness record reviews, inspections, or approvals must meet the qualifications in FAA Order 8100.8. to perform those functions. 3-6. Responsibilities. ODA holders and units must follow the FAA regulations, directives, policies, guidance, and procedures as applicable to the authorized functions. The responsibility for finding compliance with the regulations and applicable policy remains with the ODA holder. The ODA holder is responsible for the activity of the ODA unit and ODA administrator.
a. ODA Holder. The ODA holder must ensure that its ODA administrators and ODA units remain free to perform their authorized functions in accordance with FAA regulations, and are not subject to conflicts of interest that might impact their ODA unit responsibilities. In addition to performing their authorized functions, the ODA unit members must have enough time and resources to keep up to date on the current FAA regulations, directives, and guidance applicable to the authorized functions.
(3) Cooperate with the FAA when the FAA oversees the ODA holder.
b. ODA Administrator. The ODA administrator manages the ODA unit activities and communicates with the OMT. The ODA administrator must ensure that the ODA unit has sufficient organizational authority and resources to perform its authorized functions in accordance with FAA requirements. The ODA administrator must report to a level of management that is senior enough to enable the ODA unit to administer duties for the FAA, without undue pressure or influence from other organizational segments or individuals. The ODA administrator must ensure that the organization follows the procedures in its procedures manual and that the processes comply with all applicable FAA regulations and policy. If the ODA holder has more than one ODA administrator, a lead ODA administrator must be identified.
c. ODA Unit. Each ODA unit member must:
(1) Comply with the procedures in the approved procedures manual.
(2) Meet the qualifications for specific functions under the ODA.
(3) Cooperate with the FAA when the FAA oversees the ODA holder.
d. Separation of Duties. ODA holders and unit members should be aware that the delegated functions performed as an individual designee are separate and distinct from the functions performed as an ODA unit member.
3-7. Memorandum of Understanding.
a. ODA Holder's Commitment. An ODA holder agrees to use the same care, diligence, judgment, and responsibility when performing the authorized functions as the FAA would use in performing the function. This commitment starts at the senior management level of the ODA holder and extends through the ODA administrator, ODA unit, and the rest of the applicant's organization. As proof of that commitment, senior management of the organization will sign a memorandum of understanding (MOU) that outlines the charter, authority, and responsibility of the ODA holder. As a minimum, the MOU must contain the language in appendix A, figure 14 of this order.
b. Preparing an MOU. The prospective OMT and ODA holder jointly prepare the MOU. The ODA holder's senior management must sign the MOU before the ODA is issued. Appendix A, figure 14 of this order contains acceptable MOU. All personnel within the ODA holder that manage ODA unit members in any capacity must read and understand the MOU.
c. Changes to ODA Holder Signatories. Any time an ODA holder signatory of the MOU changes, the replacement must sign a revised MOU. If an ODA holder's new senior management refuses to sign the MOU, we must terminate the ODA. The revised MOU must be provided to the OMT lead within 90 days.
3-8. Authority and Functions.
a. Functions Available. We list the functions we may grant in figures 2-1, 2-2 and 2-3 of this order. Each chapter in this order that covers an ODA type gives specific function code
(7) ODA administrator and unit member duties and responsibilities.
descriptions. Limitations for each ODA type are given in chapters 8 through 15 as well. Individual limitations will be identified in the approved procedures manual.
b. Authorized Functions. We will identify the authorized ODA types in the letter of designation and specify the authorized functions and limitations in the ODA procedures manual. See appendix A, figure 3 of this order for an example of an ODA letter of designation. To add functions, an ODA holder must apply in accordance with 14 CFR § 183.43 and paragraph 4-2 of this order. The FAA must approve any changes in functions before they may be performed.
c. Products and/or Articles Selected. The ODA is limited to the products and/or articles identified in the procedures manual..
3-9. Procedures Manual. Each ODA holder must perform all authorized functions in accordance with its FAA-approved procedures manual. The procedures manual must be available to all members of the ODA unit.
a. Content. The procedures manual must address all procedures and limitations regarding functions performed by the ODA holder. The OMT may not use separate documentation to establish agreements or procedures for functions performed by the ODA holder.. The procedures manual must contain at least the following (See appendix B of this order for format and chapters 8 through 15 for detailed requirements.):
(1) Signature blocks for the FAA managing office(s) and ODA administrators. A single aircraft evaluation group (AEG) managing office manager may sign the procedures manual on behalf of any other AEG managing office(s) manager.
(2) General table of contents and a method for maintaining configuration control such as complete revision control or a log of revisions/list of effective pages.
(3) Procedure for revising the procedures manual and obtaining approval of revisions.
(a) Definition of manual changes which don't require OMT approval.
(b) Method of documenting OMT approval of changes.
(c) Method of documenting and determining approval requirements for changes in facilities or organizational structure.
(4) Preface and introduction, including procedures for FAA and ODA holder communications.
(5) Authorized functions and limitations. Limitations section must identify the products and/or articles addressed by the ODA holder’s authority.
(6) Description of the ODA holder and ODA unit organizational structure and responsibilities.
(7) ODA administrator and unit member duties and responsibilities.
(24) Appendices: › (e) Sample forms used within the ODA system.
(8) Required capabilities and ODA unit positions.
(9) Unit member listing information (see paragraph 3-13.h.).
(10) Procedures to select ODA unit members, and coordinate ODA unit member selections with the FAA.
(11) Description of the training courses each ODA unit member and ODA administrator must complete. Including standardization, recurrent, and in-house training.
(12) Self-audit procedures and responsibilities.
(13) Duration of the ODA.
(14) Maintenance of eligibility.
(15) Acknowledgement of the FAA's right to inspect the ODA holder or unit.
(16) Procedures for performing continued airworthiness functions, including investigation and resolution of service difficulties and potentially unsafe, or non-compliant conditions.
(17) Procedures for performing authorized functions.
(18) Records maintenance and submittal requirements.
(19) Corrective action procedures.
(20) Procedures for obtaining and maintaining related regulatory and guidance material.
(21) Procedures to report manufacturing activity, if applicable.
(22) Procedures for determining the impact of operational suitability issue and coordinating with the AEG.
(23) Procedures to report air operator certification activity, if applicable.
(24) Appendices:
(a) MOU.
(b) Organization charts of ODA holder and unit and company interface.
(c) Facility descriptions and addresses of ODA unit members, including remote locations.
(d) ODA unit position descriptions and required qualifications.
(e) Sample forms used within the ODA system.
(1) Each ODA lead administrator and those administrators overseeing a…
(f) Certification plans.
b. Approval. The OMT must review and approve those changes that require approval before the ODA unit performs any function affected by the change. Approval by the OMT will be indicated by FAA signature on the log of revisions page or other means agreed to by the OMT. The ODA holder must submit the changes to their manual which do not require FAA approval to the OMT within 30 days.
3-10. Training.
a. ODA Holder-Provided Training. An ODA holder must provide training to its ODA administrator and unit members to ensure continued compliance with the approved procedures manual, the regulations, and applicable FAA policies. An ODA holder must provide this training before authorizing an ODA unit member to perform a delegated function. ODA unit members must receive this training at least every two years. An ODA holder must allow the FAA to review the training materials and attend any training session. An ODA holder must incorporate changes to the training material as required by the FAA. The training must explain:
(1) The functions delegated to the authorization.
(2) The ODA holder's processes, and its procedures manual.
(3) The ODA unit member's authority and responsibility when performing authorized functions.
(4) Applicable FAA regulations, policy, and guidance material.
b. Temporary ODA unit members or those unit members with limited use are only required to receive that ODA holder training commensurate with their involvement in the project. For example, an engineering ODA unit member performing a burn test or manufacturing ODA unit member performing specific article conformity inspections at a supplier location would not need training on all of the organization's functions and procedures. The ODA holder must provide the ODA unit member sufficient training on the specific procedures related to the ODA unit member's functions. The scope, usage and content of such limited training must be agreed to by the OMT.
c. FAA Seminars. Each ODA unit member, in addition to the ODA holder's training, must attend the following FAA-sponsored training:
(1) Each ODA lead administrator and those administrators overseeing a "type" of ODA authority (TC, STC, PC, etc.) must complete ODA applicant training prior to appointment. This training is available on-line at https://av-info.faa.gov/DsgReg/Sections.aspx?OrgID=1 and includes a "Part I" and "Part II" module based on the type of authority sought. These administrators must also attend an ODA seminar at least every two calendar years.
(2) Each ODA unit member must attend FAA training seminars.
(2) Each ODA unit member must attend FAA training seminars. This includes those seminars that individual designees performing similar functions are required to take by other orders, such as FAA Order 8100.8 or FAA Order 8130.33, Designated Airworthiness Representatives: Amateur-Built and Light-Sport Aircraft Certification Functions. This applies to all ODA types except AKT ODA holders. Additionally, ODA unit members performing functions specific to an ODA, such as evaluation of production limitation record changes, must attend seminars as required by the OMT. AO ODA holder unit members must attend training specific to the functions they intend to perform, as specified by the OMT and designated in the ODA Procedures Manual.
d. Standardization Workshops. If required by the OMT, ODA unit members must attend FAA standardization workshops. Standardization workshops are subject-specific and usually developed and presented by FAA personnel or industry personnel as needed.
3-11. Duration of Appointments. An ODA is effective until the expiration date listed on the letter of designation. See paragraphs 4-4 and 5-8 of this order for guidance on the allowed duration of an appointment.
a. Transferability. An ODA is not transferable.
b. Change in Ownership. A change in ownership of the ODA holder as a result of a company name change or a corporate merger, no change in organizational structure, etc., may be executed by reissuing the ODA letter of designation and the MOU, along with revising the procedures manual to reflect the new name.
c. Change to the ODA Unit. A change in the ODA unit that involves ODA administrators, structure within the ODA holder, or changes to the ODA holder or ODA unit, may change an organization's eligibility for ODA. The ODA holder must notify its OMT lead of anticipated organizational changes to determine whether the changes will impact the authorization and how they will be handled.
3-12. Continued Eligibility. To maintain eligibility, an ODA holder must:
a. Notify the OMT lead within 48 hours of any change that would affect the ODA holder's ability to meet the requirements of its authorization. A notification due on Saturday, Sunday, or a holiday may be delivered on the next working day.
b. Comply with the requirements in its approved procedures manual.
c. Maintain a staff of qualified ODA unit members.
d. Implement corrective and remedial action for deficiencies identified by the FAA.
e. Not perform an authorized function if a change in the facilities, resources, or organizational structure affects how the ODA holder performs that function. This includes a move to a new location or the inability of the ODA holder to accommodate the ODA unit or records needed to perform the authorized function. The ODA holder may perform that function
only after it notifies the OMT lead of the change, and the OMT documents and approves the change as required in the ODA holder's procedures manual.
f. Not perform any authorized function if it moves its principal manufacturing facility or adds another facility, if an ODA holder's basis of eligibility is a PC. The ODA holder must notify the OMT of the change in accordance with 14 CFR § 21.150 , or any other issue that may affect the quality system.. In this case, the company would have to apply for a PC extension or a new PC in accordance with 14 CFR § 21.133. Note: A PC is not transferrable, see 14 CFR § 21.144.
g. Not perform any authorized function if it moves its principal manufacturing facility or adds another facility, if an ODA holder's basis of eligibility is a PMA. The ODA holder must notify the OMT of the change in accordance with 14 CFR § 21.309. In this case, the company would have to apply for a new PMA or an extension to its production approval.
h. If an ODA holder's basis of eligibility is a TSOA, the ODA holder cannot perform any authorized function if it moves its principal manufacturing facility or adds another facility. The ODA holder must notify the OMT of the change since a TSOA is not transferable in accordance with 14 CFR § 21.614. In this case, the company would have to apply for TSOA in accordance with 14 CFR § 21.603.
3-13. Selection and Appointment of ODA Unit Members. The ODA holder must select qualified ODA unit members. The ODA holder's procedures manual must contain its ODA unit member selection and approval process and documentation. See figure 3-1.
a. FAA Pre-screening of Proposed Unit Members. The ODA unit member selection process for any proposed unit member (including existing designees or unit members at other ODA holders) must include an initial notification to the OMT identifying the individual. This OMT coordination should be accomplished before the organization expends significant resources evaluating the individual. The OMT will review existing FAA databases and inform the ODA holder if the FAA is aware of any information that indicates that the individual has demonstrated a lack of care, judgment, or integrity, or is unsuitable to act as an ODA unit member. Additionally, in some cases the OMT may also review ODA unit member appointment decisions before the ODA holder may add a new ODA unit member to the staff. See paragraph 3-13d of this order.
Figure 3-1. ODA Unit Member Selection Process
ODA Holder Verification ODA holder documents evidence of existing authority Verifies experience/knowledge on type/complexity of products for specific authority Paragraph 3-13b
ODA Holder Evaluation ODA holder documents/evaluates qualifications using process similar to Order 8100.8 process Paragraph 3-13c
Is Individual an existing designee or
UM who will be authorized with same
authority?
Is FAA review of
ODA holder appointment decisions
required? Paragraph 3-13d
ODA holder submits evidence of qualifications/evaluation process OMT assesses whether UM meets qualifications OMT provides concurrence or further direction
h d
ODA holder updates ODA unit listing Paragraph 3-13h OMT assesses whether UM meets qualifications OMT provides concurrence or further direction
No
No
Yes
Yes
FAA Pre-Screening ODA holder notifies OMT of individual OMT notifies ODA holder if unsuitable
Paragraph 3-13a
(3) After two years, the OMT should not need to review any ODA unit…
b. Existing Designees or ODA Unit Members at Another Delegated Organization. An ODA holder can appoint a prospective ODA unit member that is an existing designee without evaluating their qualifications if they will perform the same functions within its ODA unit. The ODA holder must maintain evidence of the ODA unit member's designee authority. An ODA unit member for another delegated organization may be similarly appointed if the other delegated organization provides evidence of the ODA unit member's authority and limitations. The ODA unit member must have experience on the same type and complexity of projects performed by the ODA holder. If the prospective ODA unit member is expected to perform any functions outside the scope of current authority, the ODA holder must evaluate the unit member for additional functions according to paragraph 3-13c of this order.
c. Others. The ODA holder must evaluate each prospective ODA unit member that is not currently a designee or ODA unit member using a process and preparing documentation similar to that used by the FAA to evaluate designee applicants. For more information, see FAA Order 8100.8.
d. FAA Review of ODA Unit Member Appointment Decisions. It is the FAA's intention for ODA holders ultimately to appoint ODA unit members without OMT concurrence on appointment decisions. However, the OMT may decide to review an ODA holder's unit appointments until the ODA holder has proven that it can appoint ODA unit members that meet the qualification requirements.
(1) During the initial evaluation of ODA applicants, all proposed ODA unit member appointment packages should be reviewed by the OMT prior to appointing the ODA holder.
(2) For a period of two years after the initial ODA appointment, selection decisions for proposed ODA unit members, who are not currently designees or ODA unit members at other delegated organizations, may be reviewed by the OMT prior to the ODA unit member performing any authorized function for the ODA unit. The OMT should review enough appointment decisions to determine that the ODA holder is appointing qualified ODA unit members.
(3) After two years, the OMT should not need to review any ODA unit member appointment decisions unless:
(a) There are documented problems with the ODA holder's appointment process or performance. The OMT must document these problems and actively pursue corrective action with the ODA holder to improve the ODA holder's appointment process or performance. The appointment records of ODA unit members must be reviewed during subsequent oversight or inspections, or;
(b) The ODA holder has not had sufficient activity appointing ODA unit members.
e. Coordination of Proposed Noise Unit Members with AEE-100. The selection of unit members with authority to make approvals for 14 CFR part 36 must be coordinated with the Noise Division (AEE-100). This coordination may be done by either the OMT or by the ODA
holder as part of its selection process. Procedures for coordination with AEE-100 must be addressed in the ODA holder's procedures manual if authorized to make 14 CFR part 36 approvals.
f. ODA Unit Performance Problems. If the OMT identifies performance issues with an ODA unit member, the OMT must document the deficiency and require corrective action by the ODA holder, which may include removal of that ODA unit member from the ODA unit staff.
g. Appointment of ODA Unit Members at Foreign Locations. If the ODA holder desires to appoint an ODA unit member at a foreign location, it must get OMT concurrence on the location and functions to be performed by the ODA unit member. The ODA unit member is subject to the same training and oversight requirements as domestic ODA unit members.
h. ODA Unit Listing. The ODA holder must maintain a listing of active ODA unit members. The listing may be in any format acceptable to the OMT and must be provided to the OMT as required. The OMT must be notified if the removal of a unit member from the active listing was based on ODA-related performance.
(1) For each unit member, the listing must contain:
(a) Name,
(b) Signatures,
(c) Functions and limitations for each unit member,
(d) Location and name of the company for any located at facilities other than those identified in appendix C,
(e) Authority and limitations corresponding to the organization's authority and functions defined in Appendix D, The authority for all members will be defined by function codes from this order, and engineering unit member authority further described by discipline, and authorized areas/delegated functions using the charts of FAA Order 8110.37.
(2) The procedures manual must describe:
(a) how the unit member listing will be updated and maintained,
(b) the format of the listing,
(c) description for coordinating changes to the listing with the OMT along with the information the organization will provide to the OMT while unit member appointment decisions are under review by the FAA. 3-14. Self-Audit. The ODA holder must perform self-audits that evaluate the ODA unit members, the ODA processes, and compliance with all applicable FAA regulations and policy. A self-audit must be performed at least once every 12 months, and as requested by the OMT.
The self-audit does not replace the FAA inspection required by this order. The procedures manual must contain the ODA holder's audit procedures.
a. Personnel. The self-audit must include evaluation of each ODA unit members using the processes and criteria contained in FAA Order 8100.8 or FAA Order 8900.1, Flight Standards Information Management System (FSIMS), as appropriate for the functions performed by the ODA unit member. The self-audit must include review of individual ODA unit members' work for accuracy. This includes ODA unit members located at suppliers or at other locations away from the ODA holder's facility. The ODA holder must make at least one on-site visit every 18 months to manage an ODA inspection unit member's activity.
b. Procedures. The self-audit must include evaluation of the procedures used to perform all authorized functions and the other requirements of the authorization, including ODA unit appointment and training, and service difficulty support.
c. Compliance with Procedures. The self-audit must evaluate whether the ODA holder complies with its procedures manual.
d. Self-Audit Records. The ODA holder must maintain records of its self-audits and submit copies to the OMT within 14 calendar days of completion.
e. Corrective Action. The ODA unit will review proposed corrective actions before submittal to the FAA. 3-15. Self-Disclosure. Pursuant to FAA Order 2150.3, FAA Compliance and Enforcement Program, the FAA will not seek a civil penalty for regulatory for violations described in AC 00- 58, Voluntary Disclosure Reporting Program if the ODA holder promptly notifies us of the noncompliance and meets the other criteria of AC 00-58. See FAA Order 2150.3 and AC 00-58, for more information. 3-16. Work Activity Reports.
a. Manufacturing and Airworthiness. The ODA unit must complete and document its manufacturing and airworthiness activity on the summary activity report; an example is shown in appendix A, figure 10. Use of a similar form to report this information is also acceptable. Unless directed to do so more frequently, the ODA holder shall submit this report to the OMT on a quarterly basis.
b. Alteration/Repair Activity. The ODA unit must complete and document its alteration and repair data that was approved. The report should identify the make and model of product and a description of the approved repair or alteration.
c. Design Change Activity Reports. A TC ODA holder must provide quarterly reports to the OMT lead identifying any type design change approved by the ODA unit that did not require program notification. The report must include the information specified by the OMT.
(7) All other records required by the approved ODA procedures manual.
d. Air Operator ODA Activity. For AO ODA, the ODA unit must document operational certification activity in a manner acceptable to the OMT. 3-17. Records. The ODA holder must ensure that the records described below are maintained. ODA holder records must be located within the United States. The ODA holder must also ensure the records specific to the authorizations described in chapters 8 through 15 are maintained. The records may be kept by the ODA holder, its suppliers, or others, as agreed to by the OMT. Certification project files retained by the ODA holder must match the requirements for FAA offices as prescribed in FAA Order 8110.4, Type Certification or FAA Order 8900.1 (as applicable). The ODA holder must also keep any records required for any certificates or authorizations it holds in addition to an ODA. At the OMT's request, an ODA holder must make the records available for examination at any time without undue delay. The ODA holder must make the records usually maintained by suppliers available at its facility for FAA inspections when requested. The ODA holder must identify all records and submit them to the OMT lead as soon as the ODA is surrendered or terminated.
a. The following must be retained for the duration of the authorization:
(1) Any records generated and maintained under the designated alteration station (DAS), delegation option authorization (DOA) or special federal aviation regulation (SFAR) 36 regulations.
(2) For approvals and certificates issued under the ODA:
(a) The application and data required to be submitted by the regulations.
(b) The data and records documenting the ODA unit's approval, determination of compliance, or review.
Note: Airworthiness certificates and approvals need only be retained for two years, except those issued in support of a type certification project, which must be retained indefinitely. (3) A list of the products and/or articles for which ODA unit members have issued a certificate or approval.
(4) The names, responsibilities, qualifications, and example signature of the individuals who perform, or have performed, functions for the ODA unit.
(5) A copy of each manual approved by the ODA unit.
(6) Training records for ODA unit members and ODA administrators.
(7) All other records required by the approved ODA procedures manual.
(8) Any correspondence between the ODA holder and the OMT related to functions or activity performed with the authorization.
(9) The procedures manual, including all revisions.
b. The following must be retained for five years:
(4) Is an error made when issuing an operational approval.
(1) Records of the ODA holder's self-audits and implementation of corrective action.
(2) Records of any reported service difficulties associated with any design approval or certificate (including TCs, STCs, PMA by test and computation, and repair and alteration data) issued under the ODA.
c. Records Storage and Identification. The OMT and the ODA holder must agree on how to store and identify all required records for future retrieval. Certification records should be arranged by project number for easy retrieval. All ODA documentation and data must be consistent with that required by the FAA for its own records and organized in a manner that is compatible with the FAA records control system described in FAA Order 1350.14, Records Management. 3-18. Data Review and Service Experience. The ODA holder must provide continued support for approvals or certificates issued under ODA procedures in accordance with 14 CFR §§ 183.63 and 183.65. Procedures for monitoring service information, investigation, and FAA notification must be included in the procedures manual.
a. Other Data Reporting Requirements. An ODA holder must comply with all existing applicable reporting requirements in the FAA regulations, such as 14 CFR § 21.3.
b. Service Difficulty Monitoring. The ODA holder must monitor any service information available to it that is associated with approvals or certificates it holds that were issued under its ODA authority.
c. FAA Notification. For any approvals, authorizations, certificates issued or acceptance of instructions for continued air worthiness (ICA) under an ODA, the ODA holder must notify the OMT lead of any item it identifies that:
(1) Might result in an unsafe condition.
(2) Requires corrective action.
(3) Does not meet the airworthiness standards.
(4) Is an error made when issuing an operational approval.
(5) Does not meet applicable operational certification requirements.
(2) An ODA holder must submit its determination of the cause of the…
Note: Potentially unsafe conditions require 24 hour notification. All others require 72 hour notification. A notification due on Saturday, Sunday, or holiday may be delivered on the next working day. d. Investigating Safety Concerns.
(1) For any approvals, authorizations, certificates issued or ICA acceptance under an ODA, the ODA holder must investigate potentially unsafe, or non-compliant conditions in any product, article, authorization, or certificate, as required by the FAA. As part of this investigation, the ODA holder must:
(a) Determine the cause of the condition.
(b) Determine whether the problem is systemic or isolated.
(c) Review the procedures that led to the approval and determine if the procedures are adequate and if qualified ODA unit members performed them.
(d) Develop and propose corrective or remedial action. (2) An ODA holder must submit its determination of the cause of the condition and proposed remedial action within 30 days from FAA notification, or as required by the OMT. The ODA holder must submit any information it has to support FAA corrective action if further action is necessary to ensure the safe operation of the product.
e. Suspending Operational Approvals. The OMT may notify and direct the ODA holder to suspend issuance of any operational authorizations and certificates until the ODA holder implements any corrective action required by the OMT. 3-19. Corrective Action. The ODA holder must implement corrective action to address any unsatisfactory conditions with the organization's ODA procedures or performance. The ODA holder must show a willingness to do this and be proactive in incorporating improvements into its ODA system. Failure to implement needed corrective action is reason for the FAA to suspend or terminate an ODA.
a. Regulatory Non-compliances. The ODA holder must provide corrective action for any violations of the regulations as required by the OMT.
b. Other Conditions Requiring Corrective Action. The ODA holder must submit to the OMT, determination of the cause of the condition and proposed remedial action within 30 calendar days from FAA notification.
3-20. Activity Outside The United States The ODA holder must notify the OMT prior to performing any function in a foreign country. To determine if the OMT must notify a civil
aviation authority (CAA) of ODA holder activity in their country, check the individual bilateral agreement (bilateral airworthiness agreement (BAA) or bilateral aviation safety agreement (BASA) implementation procedures for airworthiness (IPA) listing for the country/jurisdiction and/or FAA Order 8100.14, Interim Procedures for Working with the European Community on Airworthiness Certification and Continued Airworthiness, for European Union (EU) Member States. Prior CAA coordination of ODA holder activity is required for those countries with which the United States does not have a BAA or BASA IPA. The OMT will coordinate any necessary technical assistance support from bilateral partners through the CAA, in lieu of ODA holder personnel, only if the CAA restricts the use of ODA holder personnel. When required for TC, or production approvals, the OMT will develop an undue burden decision paper as described in FAA Order 8100.11, Decision Paper Criteria for Undue Burden and No Undue Burden Determinations Under 14 CFR part 21.
3-21. Use of FAA Forms. The ODA holder must use FAA forms to document the certification process if an applicable FAA form exists. Refer to appendix D for FAA orders which contain the applicable forms. If necessary, forms may be altered only by striking through existing text entries and adding additional entries or supplemental information as required. The ODA holder’s procedures manual must contain a copy of the forms used within and instructions for completion of forms. If instructions by reference are not appropriate, the procedures manual should specify how the forms are to be completed.
3-22. Inspection Unit Members at Suppliers. Each ODA unit member employed by and located at a supplier facility must perform their authorized functions at that supplier’s facility, or a sub-tier facility for that same supplier. The unit member’s work must support the same products or articles produced by the supplier for the supported ODA holder.
Chapter 4. Application, Selection, and Appointment. 4-1. Pre-Application Communication. A prospective ODA applicant must discuss with the FAA its desire to obtain an ODA before formal application. We issue ODAs at our discretion. Each prospective applicant must confirm whether we need to appoint the organization and whether we have the resources to manage its organization. An organization must begin discussions with the appropriate appointing offices (as defined in figure 4-1 of this order) before preparing the application contents. The appointing office must inform the applicant if we do not need the authorization or if we do not have the resources to manage the authorization. The appointing offices must give applicants feedback on their proposed organizational structure to determine if it is adequate before they submit the application.
Figure 4-1. Appointing/Managing Offices
If the application is for:
And the applicant seeks:
Then the appointing office is:
And the evaluation panel also includes these managing offices:
And the lead managing office is:
TC ODA ACO MIDO AEG ACO
PC ODA MIO MIDO MIDO
TSOA ODA MIO MIDO MIDO
STC ODA ACO ACO MIDO FSDO
AEG
ACO
MRA ODA Only data approval functions
ACO ACO/AEG ACO
MRA ODA Both airworthiness and data approval functions
FSDO ACO/AEG FSDO
MRA ODA Only airworthiness functions
FSDO FSDO FSDO
PMA ODA Only airworthiness or production functions
MIO MIDO MIDO
PMA ODA Both engineering and airworthiness functions
ACO ACO MIDO AEG ACO
AKT ODA AFS-630 N/A AFS-630
AO ODA FSDO RO FSDO
(2) For a new AO ODA, the applicant must evaluate proposed ODA unit…
FAA Offices: ACO - Aircraft Certification Office AEG - Aircraft Evaluation Group FSDO - Flight Standards District Office (includes Certificate Management Office) MIDO - Manufacturing Inspection District Office (includes Certificate Management Office, Certificate Management Unit, and Manufacturing Inspection Satellite Office) MIO - Manufacturing Inspection Office RO - Flight Standards Regional Office 4-2. Application. Applications must be submitted to the appropriate appointing office as shown in figure 4-1 of this order. If an applicant is applying for more than one type of ODA that will involve multiple appointing offices, they should coordinate with all appropriate appointing offices prior to submitting its application. The appointing offices will establish a lead office responsible for accepting the application and conducting the evaluation. An appointing manufacturing inspection office (MIO) may delegate selection and appointment responsibilities to the manufacturing inspection district office (MIDO). Each application must include:
a. FAA Form 8100-13, ODA Statement of Qualifications, (appendix A, figure 1 of this order).
b. A cover letter stating the authority and limitations requested for the authorization, including the products and/or articles for which the authorization will be used. The cover letter must also contain a brief statement describing the applicant's eligibility under 14 CFR § 183.47.
c. A detailed description of how the applicant meets the eligibility and qualification requirements defined in paragraphs 3-4 and 3-5 of this order, and the specific eligibility requirements defined in chapters 8 through 15 of this order.
d. A detailed description of the applicant's proposed ODA setup, including the ODA holder's organizational structure, the ODA unit's relationship to the applicant's organization, and facilities.
e. The ODA administrator's name, experience, and qualifications in a resume that clearly demonstrates that the proposed ODA administrator meets the qualifications of chapter 3.
f. A list of the proposed ODA unit members and information outlining the experience, qualifications, proposed functions, and limitations of each ODA unit member.
(1) The applicant must evaluate the proposed ODA unit members to determine that they meet all qualifications before application. The applicant must use a process that is similar to that used by the FAA to evaluate designee applicants. See FAA Order 8100.8. Proposed ODA unit members that are existing designees need not be evaluated if they will be performing the same functions as under a current designation.
(2) For a new AO ODA, the applicant must evaluate proposed ODA unit members to determine if their experience and expertise are sufficient to support the proposed functions. The
(2) If the FAA does not need, or does not have the resources to manage…
applicant should develop and document in the procedures manual a process for evaluation that is similar to that used by the FAA to evaluate designee applicants. See FAA Orders 8100.8 or 8900.1. The OMT makes the final determination of whether or not the applicant’s process is acceptable based on the functions the unit members will be performing.
g. A draft procedures manual that includes the information required by paragraph 3-9 of this order, and the specific information outlined in the procedures manual example in appendix B and in chapters 8 through 15. 4-3. Selection Process.
a. Initial Application Screening.
(1) The appointing office will screen each application to verify that:
(a) All required documentation is complete.
(b) Appointing the organization will be a benefit to the FAA.
(c) The FAA has the resources to manage the organization and its activity.
(d) The organization meets the eligibility requirements of 14 CFR § 183.47 and chapters 8 through 15 of this order.
(2) If the FAA does not need, or does not have the resources to manage a particular ODA applicant, the appointing office must prepare a denial letter for the office manager's signature. (See appendix A, figure 4 of this order.) Further, if the appointing office determines that the applicant is ineligible, it prepares a denial letter. The appointing office must inform the applicant if it needs additional information to determine the applicant's eligibility.
b. Evaluation Panel (EP) Makeup.
(1) If an application passes the initial screening, the appointing office must organize an evaluation panel (EP) of FAA personnel that will evaluate the application. An appointing office representative will manage the EP. The EP will consist of the following:
(a) Representatives from each relevant FAA organization in figure 4-1 of this order.
(b) Technical specialists from all areas proposed for the authorization. Note 1: The EP may consist of the prospective OMT members for the organization, or the appointing office may use a standard panel for all applicants. See paragraph 5-2 of this order for information about the
(7) The procedures manual must contain the information required by the…
OMT. Note 2: The appointing office must inform the appropriate regional (AFS only) and headquarters office representative(s) of all ODA applications it receives. Regional and headquarters specialists from AIR-100, AIR-200, AFS-600 or AFS-800 may participate in evaluation panel activity (such as review and comment on the ODA holder’s procedures manual) as they determine necessary, but are not considered official EP members. Each regional/headquarters office will determine its participation based on the desired functions and the need to be involved in the appointment decision. (2) The EP must be qualified, familiar with the functional areas of delegation requested, and experienced with the applicable certification processes.
c. Appointment Considerations. The EP must consider the following to determine whether we will grant the ODA:
(1) The applicant must employ or have available a staff of qualified personnel appropriate to the authorization requested.
(2) The applicant must have adequate resources, facilities in the United States, equipment, tools, and manuals appropriate for the authorization.
(3) The ODA administrator(s) and unit must possess integrity, sound judgment, and a cooperative attitude.
(4) The organization must have a history of enough work to justify the appointment.
(5) The FAA must have the appropriate resources to oversee, manage, and support the appointment.
(6) The ODA administrator(s) must meet the qualifications of paragraph 3-5a of this order.
(7) The procedures manual must contain the information required by the regulations and this order.
d. Evaluation of the Application. The EP will review each application to determine whether the applicant qualifies for the authorization. The EP will thoroughly evaluate the application, the proposed procedures manual, the applicant's qualifications, the proposed ODA administrator's and ODA unit members' qualifications, and the organization's resources and structure. The EP must verify the accuracy and authenticity of the information in the application. The EP must verify that the information in the application and procedures manual complies with
(4) Procedures Manual Review. › (b) Contains procedures that comply with all orders pertaining to the…
all applicable regulations and this order.
Note 1: If an ODA holder's authority will include any authority with respect to part 34 or 36, the EP must coordinate with AEE-100, Office of Environment and Energy. AEE-100 must concur with any part 34 or part 36 authority granted to the organization or individual unit members. Note 2: If an ODA holder’s authority will include ICA review and acceptance authority, the AEG EP member is responsible for determining eligibility and for reviewing the applicant’s process for accepting ICA. (1) Evaluation Panel Documentation. The EP must create and maintain documentation such as meeting minutes, email, or other correspondence about its evaluation.
(2) Interviews. The EP may interview the proposed ODA administrator, ODA unit members, or ODA applicant's management to verify the information in the application and determine whether the ODA applicant understands the requirements its organization must meet. While interviewing staff members, the EP may evaluate their knowledge of the certification procedures and technical responsibilities for which the ODA holder will be responsible.
(3) Site Visits. The EP may conduct site visits to evaluate an organization's facilities and abilities. Although existing certificate holders usually have existing facilities known to the FAA that may not require inspection, the EP will usually need to inspect consultant groups' facilities to verify they have the facilities necessary for the authorization.
(4) Procedures Manual Review. The EP must approve each applicant's procedures manual prior to appointment. A single AEG EP office manager may approve the applicant’s procedures manual on behalf of all other AEG EP office managers. During an evaluation, the EP must review the proposed procedures manual and ensure that it:
(a) Contains the information required by paragraph 3-9 of this order.
(b) Contains procedures that comply with all orders pertaining to the functions described.
e. Denial of ODA Applications. The appointing office will notify the applicant if it denies its application. The appointing office must send the applicant the denial in writing via registered mail within 30 days of the decision. The denial letter must explain the reasons for the denial and detail what steps the applicant must take before the FAA will reconsider the application. (See appendix A, figure 4 of this order for an example of the ODA denial letter.)
f. Appeals. If denied, an applicant may usually appeal the FAA decision in writing and request a review by an appeal panel. Denial decisions based on failure to attend required training, lack of benefit to the FAA or the FAA's inability to manage the organization may not be
appealed. An applicant must submit its appeal within 60 calendar days of receiving notification of the denial.
i. Appeal Panel Decisions. The appeal panel may: › (3) Request that any part of the appointment process be repeated citing…
g. Appeal Panel. An appeal panel will consist of at least two managers and an engineer or inspector or flight test pilot from the geographic directorate, manufacturing inspection office (MIO), and/or flight standards regional office (RO) as appropriate for the application. The appeal panel will consider all available information and may interview the applicant, applicant's staff, and evaluation panel personnel. The appeal panel may also invite other persons as needed at its deliberations. The appeal panel will reach a decision by consensus and all decisions are final.
h. Functioning of the Appeal Panel. The appeal panel must determine if the appointing office conducted the appointment process properly. If the appeal panel finds discrepancies, it must take appropriate actions to ensure the integrity of the appointment process. To determine whether the appointing office conducted the appointment process properly, the appeal panel may interview members of the EP and review:
(1) The documentation in the applicant's file,
(2) The EP's written justification for the denial, and
(3) Other information it determines appropriate.
Note: The appeal panel must complete its deliberations within 45 calendar days from the date of the appeal, and must document its decision. Each panel member must sign the decision before the panel sends it to the directorate or RO manager. The directorate or regional office manager will notify the applicant and appointing office of the appeal panel's decision by registered mail within 15 calendar days of the appeal panel's decision.
i. Appeal Panel Decisions. The appeal panel may:
(1) Uphold the previous decision;
(2) Override the previous decision with a new decision and provide appropriate justification; or
(3) Request that any part of the appointment process be repeated citing new information that the EP must review, or issue additional instructions and clarifications to the EP. The appeal panel may direct that the previous EP review the application, or it may direct the appointing office to appoint a new EP. 4-4. Appointment. If an EP approves an application, the OMT and ODA holder must prepare an MOU, as described in paragraph 3-7 of this order. At least one member of the applicant's senior level management, typically the organization's chief executive officer, must sign the MOU. After completing the selection process (including getting the MOU signed) and notifying their directorate or regional office manager, the appointing office will provide the applicant a
letter of designation. The letter of designation must be signed by all of the OMT's office manager(s), except that single OMT AEG office manager may sign the letter of designation on behalf of any other OMT AEG office managers. The letter of designation must note the organization, main operating location, types of ODA, authorization number, and expiration date for the ODA. The ODA procedures manual must include the functions and limitations of the authorization. The scope of the limitations may be in any form appropriate to the authorization. For example, limitations may be imposed based on a lack of certain experience, equipment, or limited to certain types of aircraft. See appendix A, figure 3 of this order for a sample letter of designation. New ODAs will be granted for two years. See paragraph 5-8 of this order for appointment duration considerations for existing delegated organizations.
(1) The OMT members must successfully complete FAA Academy Course No.
Chapter 5. Oversight 5-1. Oversight Program. The FAA's oversight program for delegated organizations is based on a systems approach to managing and supervising an organization. Oversight consists of supervision, addressed here, and inspections, which are addressed in chapter 6. We will focus on how an organization performs and its approved systems and procedures. We will oversee the organization as necessary to ensure that it performs adequately. The oversight program includes supervising and evaluating an organization's:
a. System, personnel, and procedures;
b. Projects and activities; and
c. Overall performance.
5-2. Organization Management Team (OMT). An OMT of FAA personnel oversees the ODA holder. The OMT includes members of the Aircraft Certification and Flight Standards field offices, including the AEG as needed to oversee the ODA holder. Participation will vary depending on the functions the ODA holder is authorized to perform. The OMT members must be knowledgeable and experienced in the functions the ODA unit performs.
a. The OMT lead coordinates the OMT's activity and serves as the focal point for communication with the ODA holder. The manager of the appointing office (see figure 4-1 of this order) selects the OMT lead.
b. An ACO's OMT members oversee all design approval and type certification procedures. The ACO also oversees the engineering and flight test functions performed by the ODA unit. The OMT must include ACO engineers from all authorized technical disciplines.
c. Manufacturing and Flight Standards Airworthiness OMT members oversee the authorized inspection and airworthiness procedures and functions. In addition, the Flight Standards OMT member will inform the OMT of any applicable change in the ratings or limitations of the ODA holder's repair station or operator certificates.
d. Flight Standards OMT members oversee operational approvals such as air operator certification.
e. The AEG OMT member(s) oversees ICA review and acceptance procedures and functions, is responsible for ICA concurrence when not delegated and for maintenance and operational issues on certification projects.
f. The OMT must attend the following training to ensure they have the appropriate knowledge to manage the organization.
(1) The OMT members must successfully complete FAA Academy Course No. 23005, Designee Management for AIR & AFS, or equivalent if provided for in FAA Order
8000.93, Aircraft Certification Service National Technical Training Plan or FAA Order 3140.20, Flight Standards Service National Training Program. Individuals that have more than 1 year of experience working for the FAA who have not attended the required course may serve on the OMT if assigned a mentor from within their office that has attended. The mentor will assist the OMT member on ODA oversight issues.
(2) Approving the Organization's Procedures. › c. Ensure ODA Unit Members Are Approved. The OMT must ensure that the…
(2) The OMT members must attend recurrent FAA designee seminars as required by FAA Order 8100.8 or associated Flight Standards policy, that are relevant to the discipline within the ODA that they oversee as an OMT member. Engineering and flight test OMT members must attend these seminars every 4 calendar years, inspection, operations and airworthiness OMT members must attend every 3 years. If an OMT member does not oversee specific technical functions, the OMT member may choose which seminar sessions to attend. In addition, the OMT lead must attend an ODA seminar at least every two calendar years.
(3) The managers of OMT members (including the AEG) must receive the FAA Academy Briefing, Managing AVS Delegation Specialists, item number 27200012.
5-3. Supervision Overview. In supervising an ODA holder, the OMT guides, manages, and provides performance feedback to the ODA holder. Supervision involves the FAA working and interacting with the ODA unit. Supervision consists of the following:
a. Managing the Organization's Activity.
(1) Defining and Understanding the Authority and Limitations of the Organization. The procedures manual defines an ODA holder's authority and limitations. The ODA holder's authority and limitations determine the functions it may perform. The OMT must ensure that the ODA holder's authority and limitations continue to be appropriate based on the organization's capability, experience, and history.
(2) Approving the Organization's Procedures. By approving the procedures, the OMT ensures that the functions performed by the organization result in products and approvals or certificates that comply with FAA regulations and policies. The OMT must:
b. Approve Procedures Manual Changes. Procedures manual changes address the authority or limitations of the organization, the organization's system model, or changes in the procedures for performing authorized functions. The OMT must approve most procedures manual changes before the ODA holder implements them. The OMT lead will determine which OMT members must coordinate on each procedures manual change. For revisions requiring FAA approval, each OMT lead must obtain Engineering Procedures Office (AIR-110) concurrence for the following ODA types: TC ODA, STC ODA, MRA ODA (data approval), PMA ODA (test and computation). AIR-110 concurrence is not necessary when ACO staff member(s) have been authorized to act on our behalf to review and approve ODA procedures manuals.
c. Ensure ODA Unit Members Are Approved. The OMT must ensure that the ODA holder follows its procedures for selecting ODA unit members. The procedures must follow the process defined in paragraph 3-13 of this order.
(3) Verifying compliance with procedures.
d. Managing Program Activity. For TC, STC, and PMA programs, the final step in authorizing certification activity is the OMT review of the program notification letter. The OMT must determine whether the ODA holder may perform its authorized functions on a particular project. The OMT must review each program notification letter (PNL) and determine what FAA involvement is required. The OMT may delegate all aspects of the program, or retain some parts for FAA approval as it determines necessary.
e. Guidance and Feedback.
(1) Providing Guidance. The OMT will help each ODA holder get required directive and policy material. Most FAA regulations, directives, and ACs of interest to ODA holders are available on the FAA's website. The OMT should provide copies of any needed material not available via the Internet. The OMT must ensure the ODA holder has the information and instruction necessary for it to perform its authorized functions.
(2) Feedback. The OMT must provide feedback to the ODA holder about its performance. The OMT should notify the organization of any problems with its performance as soon as possible. If the feedback requires corrective action, the OMT must notify the ODA holder as described in paragraph 5-6 of this order.
f. Assessing Performance.
(1) Review of the Organization's Work. As determined necessary, the OMT must review the ODA unit's work and data for accuracy and completeness. The OMT will take into consideration the amount of the review on the organization's experience, the safety impact of the work being reviewed, the quality of work performed on previous projects, and the ODA unit member performing the function. Previous service difficulties or errors should be considered when deciding the amount of review needed. The OMT must review samples of completed project records, such as airworthiness, conformity, compliance, ICA and type design data. For operational approvals, the OMT must review samples of completed certification files, including all associated records required for certification. If the OMT requires personal meetings or inspections with the ODA holder or unit, they should coordinate them through the ODA administrator.
(2) Review of Self-Audits. The OMT must review the self-audit reports generated by the ODA holder for possible trends and items requiring corrective action. The OMT lead must coordinate the review with the other OMT members as appropriate, and coordinate corrective actions in accordance with paragraph 5-6 of this order if necessary. The OMT must ensure that self-audits address all of the ODA holder's authorized functions, and that the ODA holder performs them annually.
(3) Verifying compliance with procedures. The OMT must verify that the authorization holder complies with the approved procedures manual and referenced internal processes.
g. Maintaining Oversight Documentation. Proper documentation provides the OMT with the information it needs to oversee the organization properly. Documentation also provides a history of the organization's performance, in case OMT members change or the ODA holder
(2) Responses to PNL, records of specific findings, etc.
seeks additional authority.
(1) The OMT lead will maintain records for each authorization managed. (The OMT members must provide any records not available to the OMT lead.) The records must include at least the following as applicable:
(a) Approved ODA application package.
(b) Evaluation panel documentation and rationale.
(c) Copy of the letter of designation and memorandum of understanding.
(d) General correspondence (non-project-specific) between the ODA holder and the OMT.
(e) Copy of the current procedures manual.
(f) Delegated organization supervision records and inspection reports.
(g) Copy of summary activity reports (if applicable).
(h) Enforcement history.
(i) Self audit reports.
(j) Copies of the organization's A-3 operations specifications showing the status of ratings, limitations, and capabilities list (repair stations and operators).
(2) The other OMT members must have records they can access which document their specific activity in support of the OMT. These records include:
(a) Supervision records.
(b) Documentation of their input regarding projects performed by the organization.
h. Type Certification Records. Rather than the ACO or MIDO retaining all of the FAA project records as required by FAA Order 8110.4 the OMT will maintain limited records for approvals issued by the ODA holder. These records include:
(1) Copy of all project-related correspondence or data submitted by the ODA holder.
(2) Responses to PNL, records of specific findings, etc. provided by the OMT.
(3) A copy of certificates issued or records of design change approvals. 5-4. Supervision. The level of supervision depends on the ODA holder's experience, history, and past performance as well as the technical complexity and safety impact of the functions or
(4) Review project files.
projects it performs. The OMT members must complete the Delegated Organization Supervision Record (see appendix A, figure 13 of this order) to document their supervision activities. OMTs may use differently formatted electronic tools, including SharePoint sites or other means, to temporarily capture and maintain ODA supervision records rather than a hard copy format. Electronic tools must clearly identify the record or information as an ODA supervision record and be able to capture all the information provided for by the hard copy. Additional information fields may be added to the electronic record as desired.
a. Required Evaluation Items. The OMT must annually assess the required evaluation items on the Delegated Organization Supervision Record. The OMT should meet and budget annually to establish a strategy for assessment of those items. The strategy should consider which OMT members will assess each item.
b. Coordinating Supervision Activity. The OMT lead will coordinate all supervision activity. The type of coordination will vary depending on the size and complexity of the ODA holder and OMT. If the OMT consists of only a few people, it may be appropriate to inform all OMT members of any activity related to the organization. For larger OMTs, like those overseeing TC ODA holders, it may be more practical to coordinate within technical disciplines, which would report their activity and findings to the OMT lead. The entire OMT will decide exactly how it will coordinate its supervision activity. Regardless of the arrangement, the OMT members must provide the OMT lead with supervision records documenting their supervision visits to the organization.
c. Planning Supervision Visits. Each OMT member should notify the OMT lead of any planned supervision activity at the organization's facility. The OMT lead should notify the ODA administrator of the planned visit. If the OMT has issues with any approvals issued by the organization or other performance issues, the OMT should coordinate them with the ODA administrator. If necessary, the OMT may make unannounced visits. Supervision visits cannot be performed in lieu of the Delegated Organization Inspection Program.
d. Engineering Supervision. Engineering OMT representatives can accomplish most of their supervision activity by reviewing data. This may not require on-site visits to the organization's facility. The OMT will determine the number of visits needed. At least one engineering OMT representative must make at least one supervision visit to the ODA holder's facility each year, in addition to the inspection requirements of chapter 6. The OMT member may combine this supervision visit with specific project activity, such as witnessing tests or participating in flight tests. However, the focus of the visit must be for the OMT member to:
(1) Review approved test plans and data such as compliance substantiation and type design data.
(2) Discuss self-audit results.
(3) Review implemented corrective actions.
(4) Review project files.
(2) Identify safety issues.
(5) Review internal training and training records.
(6) Review ODA unit member selection decisions and records.
(7) Provide the latest guidance and policy.
(8) Interact with the ODA unit members.
e. Manufacturing Supervision. Manufacturing OMT representatives oversee manufacturing activity primarily through direct interaction with the ODA unit, which requires visiting the ODA holder's facility. They can tailor the number of visits to the facility, but must visit the ODA holder at least once a year. These visits are in addition to the inspection requirements of chapter 6. They should base the number of visits on the ODA unit's experience and effectiveness of previous certification efforts. The frequency of visits will depend on the size of the organization, level of activity, and past performance. For smaller ODA holders or those with a low-level activity or no performance problems, manufacturing OMT representatives may need only one or two visits a year. Quarterly visits may be more appropriate for ODA holder's with increased complexity. During the visit, the manufacturing OMT member will:
(1) Determine compliance with regulatory requirements.
(2) Identify safety issues.
(3) Observe ODA unit members performing airworthiness or conformity inspections.
(4) Discuss self-audit results.
(5) Review implemented corrective actions.
(6) Review project files.
(7) Review internal training and training records.
(8) Review ODA unit member selection decisions and records.
(9) Provide the latest guidance and policy.
(10) Interact with the ODA unit members.
f. Flight Standards Supervision. The Flight Standards OMT representatives oversee the maintenance and operational activity through direct interaction with the organization. This requires visiting the organization. The minimum number of visits will be identified through the National Work Program and may be tailored based on the ODA holder's activity level. These visits may be performed in conjunction with other surveillance activity. During the visits to the facility, the Flight Standards OMT member will:
(1) Determine compliance with regulatory requirements.
(2) Identify safety issues.
j. Required Evaluation Items. The OMT must evaluate the applicable…
(3) Observe ODA unit members performing aging aircraft records reviews, airworthiness functions or conformity inspections.
(4) Observe ODA unit members performing air operator certification processes.
(5) Discuss self-audit results.
(6) Review implemented corrective actions.
(7) Review certification files.
(8) Review internal training and training records.
(9) Review ODA unit member selection decisions and records.
(10) Provide the latest guidance and policy.
(11) Interact with the ODA unit members.
g. Aircraft Evaluation Group Supervision. AEG OMT member(s) oversee ICA review and acceptance activity primarily through direct interaction with the ODA unit, which may require visiting the ODA holder’s facility. The frequency of visits will depend on the size of the organization, level of activity, and past performance. The AEG OMT member must perform supervision at least once a year. The AEG OMT member will:
(1) Identify safety issues.
(2) Discuss self-audit results.
(3) Review implemented corrective actions.
(4) Review ICA review and acceptance decisions and records.
(5) Review internal training and training records.
(6) Provide the latest guidance and policy.
h. Documenting Supervision. The OMT will document supervision activity and significant communications with the ODA holder using the Delegated Organization Supervision Record in appendix A, figure 13 of this order. The record is used to document both general supervision activity and any unsatisfactory performance.
j. Required Evaluation Items. The OMT must evaluate the applicable items listed on the record at least once a year. Each OMT member must evaluate each of the items applicable to their technical discipline. Not every interaction with the ODA holder needs to be recorded, but every supervision visit to the organization's facility must be recorded. The OMT member performing the supervision should rate each item assessed as satisfactory, unsatisfactory, or not applicable. If an evaluation item is not assessed during the activity, leave the item blank.
(2) Coordinating Supervision Visit Findings.
Corrective action must be implemented for all items rated as unsatisfactory.
(1) Text Blocks on Back of Supervision Record.
(a) Summary of Visit or Communication. Provide a summary of activity performed during any visit or important communications with the organization not otherwise documented. For visits, the summary should include details on how the evaluation items were assessed.
(b) Notable Conditions Encountered. A notable condition is any item or condition of interest that does not require corrective action, but warrants documentation. Highlight the notable conditions found. These may be items to assess during the next visit, or areas of interest to other OMT members.
(c) Items Requiring Corrective Action. Describe any evaluation item rated as unsatisfactory, or any other condition determined to need corrective action. Provide specific details of any unsatisfactory condition and check the box on the front page indicating corrective action is required. The OMT lead must coordinate with the other appropriate OMT members regarding items identified as needing corrective action. If the OMT lead concurs that corrective action is required, the OMT lead must notify the ODA holder in accordance with paragraph 5-6 of this order.
(2) Coordinating Supervision Visit Findings. The OMT member performing the supervision activity should communicate observations with the ODA administrator (if possible) and any ODA unit members involved in the reviewed activity. The ODA administrator should be told of any items identified as needing corrective action and further notified of such items in the future. 5-5. Delegated Organization Inspection Program. Under the inspection program described in chapter 6, the OMT inspects all aspects of the ODA holder's performance. It assesses both system-level procedures and compliance, how the ODA holder manages the ODA unit, and the ODA unit's technical proficiency and judgment. The inspection is a means for the OMT to assess whether:
a. The ODA holder's procedures are adequate, b. The ODA unit has complied with the procedures, and c. The ODA unit makes technical decisions that are acceptable. 5-6. Corrective Action. The OMT must ensure the ODA holder takes corrective action to address non-compliances and problems with the organization's procedures or performance.
a. Regulatory Non-compliances. The OMT lead must notify the ODA holder of any violations of the regulations (other than non-compliances with the airworthiness standards), in accordance with FAA Order 2150.3.
Note: The OMT lead must be familiar with the FAA's compliance and enforcement program and must attend the FAA's compliance and enforcement training. If not, the OMT lead must coordinate any compliance and enforcement activity with other members of the OMT who are familiar with the program's requirements. Manufacturing and flight standards OMT members usually have experience with compliance and enforcement procedures.
(4) Evaluate the cause of the condition and proposed remedial action in…
b. Non-compliance with the Airworthiness Standards and Potentially Unsafe Conditions. If an ODA unit approval or certificate results in a potentially unsafe product or a product not meeting the airworthiness standards, the OMT lead must immediately notify the organization of the unsafe condition or non-compliance and:
(1) Assess how the condition affects safety to determine whether we will issue an airworthiness directive (AD) to correct the condition on products in service.
(2) Pursue AD action if necessary.
Note: The FAA uses the AD process to mandate product changes or repairs for unsafe conditions. If a noncompliant condition in a product does not result in an unsafe condition, the OMT may ask the organization to correct the condition. The OMT must document when the ODA holder does not take corrective action for noncompliant conditions. The OMT will consider this when assessing the ODA holder's performance.
(3) Require the ODA holder to:
(a) Determine the cause of the condition.
(b) Determine whether the problem is systemic or isolated in nature.
(c) Review the procedures that led to the approval and determine if the procedures are adequate and if qualified ODA unit members performed them.
(d) Develop any proposed corrective or remedial action.
(e) Submit its determination of the cause of the condition and proposed remedial action within 30 calendar days.
(4) Evaluate the cause of the condition and proposed remedial action in conjunction with the ODA holder as warranted.
(3) Evaluate the cause of the condition and proposed remedial action in…
(5) Verify that appropriate corrective or remedial action is implemented.
c. Non-compliance with Operational Certification Standards and Potentially Unsafe Operators. If an ODA unit approval or certificate issuance results in a potentially unsafe operator or an operator not meeting certification standards, the OMT lead must immediately notify the organization of the unsafe condition or non-compliance and:
(1) Assess how the condition affects safety to determine whether certificate action needs to be taken.
(2) Require the ODA holder to:
(a) Determine the cause of the error or improper certificate issuance.
(b) Determine whether the problem is systemic or isolated in nature.
(c) Review the procedures that led to the certificate issuance and determine if the procedures are adequate and if qualified ODA unit members performed them.
(d) Develop any proposed corrective or remedial action.
(e) Submit its determination of the cause of the condition and proposed remedial action within 30 calendar days.
Continue reading ↓ 120 of 611 passages shown