Order JO 7110.118A Land and Hold Short Operations (LAHSO)
This document is cancelled. Cancelled by JO 7110.118B. Check the official source before relying on it.
Distribution: Electronic Distribution Initiated By: AJV-8 Mission Support Services - Terminal Procedures
FAA Logo
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
Air Traffic Organization Policy
Effective Date: January 30, 2016 SUBJ: Land and Hold Short Operations (LAHSO)
FEDERAL AVIATION ADMINISTRATION
1. Purpose of This Order. This order prescribes the standards for use by the Air Traffic Organization (ATO), Flight Standards (AFS), and Airports Safety and Standards (AAS) in approving and conducting land and hold short operations (LAHSO). It also establishes the terms of reference, conditions, and limitations for the application of LAHSO. This order provides procedures to be applied when LAHSO clearances are being issued to Federal Aviation Regulations (FAR) Parts 91, 121, 125, 129, and 135 aircraft operators.
2. Audience. This order applies to Mission Support Services (AJV), Air Traffic Services (AJT) and all associated air traffic control facilities, ATO Safety and Technical Training (AJI), Flight Standards (AFS), and Airports (AAS).
3. Where Can I Find This Order? This order is available on the MyFAA employee Web site at https://employees.faa.gov/tools_resources/orders_notices/.
4. Cancellation. This order cancels FAA Order 7110.118, Land and Hold Short Operations, effective July 14, 2000.
5. Explanation of Policy Changes.
a. Cancels Appendix 1 Aircraft Group/ Distance Minima of FAA Order 7110.118.
b. Now refers to FAA Order 7360.1, Aircraft Type Designators.
c. Rephrases the requirement to issue landing traffic information to aircraft/vehicle crossing a runway beyond the hold short point.
d. Changes office identifications due to Agency reorganization.
e. Removes references to PLASI due to their obsolescence.
f. Allows the use of automated display tools to list LAHSO eligible aircraft for each configuration.
g. Shifts responsibility to the facility level to provide authorized runways and landing distances for publication into the Airport/Facility Directory.
h. Removes the requirement for a Headquarters level annual assessment of LAHSO operations.
i. Accounts for the approval of AFS Letter of Authorizations (LOAs) at the regional level.
6. Action. Facility managers must ensure all air traffic control (ATC) personnel are briefed on the content of this order prior to conducting LAHSO. In order to conduct LAHSO, facility managers must implement procedures that are in accordance with this order.
7. Waivers. No waivers will be issued.
JO 711 0.118A
01/30/16 7110.118A 8. Criteria for Conducting LAHSO. Local LAHSO development teams must be established, in accordance with subparagraph 11.b.(1) of this order, to develop procedures utilizing the following criteria.
a. The minimum distance required to conduct LAHSO will be 2,500 feet of the available landing distance (ALD) on the hold short runway. This distance will be measured from the landing threshold to the hold short point.
b. For air carrier operations only:
(1) Arrival/arrival. Approved if the distance on the full-length runway from the threshold to the intersection where the hold short clearance is effective is greater than 3,000 feet.
(2) Arrival/departure. Approved if the distance from the departure runway threshold to the intersection where the hold short clearance is effective is less than 2,000 feet.
(3) If the runway distance and configuration do not meet the requirements of subparagraphs 8.b.(1) and (2) of this order and air carrier operations are being conducted, rejected landing procedures (RLP) must be developed and validated through modeling in accordance with FAA requirements using the following guidelines.
(a) The local LAHSO development team (see Paragraph 11.b.(l) of this order) is responsible for developing the procedure collaboratively, considering the following:
(i) A heading to fly with instructions to remain clear of clouds. (ii) The point from which the rejected landing is initiated (the first one-third of the runway, or 3,000 feet, whichever is less). (iii) Potential conflict with terrain or obstacles along the rejected landing flight path. (iv) Potential conflicts with other procedural requirements; for example, is there a possible conflict between an RLP and a one-engine-out procedure for a full-length aircraft? (v) Performance of the LAHSO aircraft and the full-length aircraft. (vi) Different full-length traffic scenarios (for example, arrival, departure, go-around). (vii) Any other locally specific issues.
(b) Only one RLP can be developed for each runway configuration. Therefore, this single RLP must then be designed to accommodate all differing types of aircraft that could possibly be required to use it.
(c) Through modeling, RLPs must demonstrate an acceptable level of safety.
(d) Local facilities must submit the RLP procedure(s) to the Service Area Director of Operations through the Operations Support Group (OSG) for approval.
(e) The local LAHSO development team is responsible for validating the procedure through modeling before approval to the facility for use.
9. LAHSO Procedures.
a. General. The following conditions must exist at the airport.
(1) Ceiling and visibility requirements.
(a) Non-air carrier aircraft: ceiling 1,000 feet and visibility 3 miles.
(b) Air carrier aircraft: ceiling 1,500 feet and visibility 5 miles, unless the landing runway is equipped with precision approach path indicator (PAPI) or visual approach slope indicator (VASI), in which case 1,000 feet ceiling and 3 miles visibility must be applicable. For configurations requiring a RLP, the ceiling and visibility may differ.
01/30/16 7110.118A (2) The LAHSO runway ALD must be dry.
(3) The tailwind on the hold short runway must be calm (less than 3 knots).
(4) LAHSO must not be utilized if wind shear has been reported.
(5) LAHSO will only be conducted at those airports that maintain a letter of agreement (LOA) signed by all the required parties, as defined in Paragraph 10 of this order. A copy of the LOA must be uploaded to the Facility Directive Repository prior to implementation.
b. Runway Equipment and Facilities. Markings and signs must be installed in accordance with Advisory Circular (AC) 150/5340-1, Standards for Airport Markings; and AC 150/5340-18, Standards for Airport Sign Systems.
(1) Runway hold-short position markings must be installed and clearly visible at all hold short points.
(2) There must be only one designated hold short point per operational direction on a runway.
(3) Runway hold short position signs must be installed at each hold short point and must be located on both sides of the runway. If one of the two signs is not functional or is destroyed, LAHSO may continue until the sign is repaired or replaced, if land and hold short lights are installed and operating.
c. Lighting.
(1) Land and hold short lights must be installed as required below, in accordance with AC 150/5340-30, Installation Details for Land and Hold Short Lighting Systems.
(a) Any LAHSO that requires lights must be conducted with land and hold short lights that pulse at the rate specified in AC 150/5345-54.
(b) Land and hold short lights are required for all LAHSO except non-air carrier to non-air carrier runway/runway daytime LAHSO.
(2) When two or more land and hold short lights in a bar are not functional, the entire bar is considered out of service and operations requiring those lights must be terminated.
(3) If the Automatic Terminal Information Service (ATIS) broadcast contains a generic LAHSO announcement (for example, "LAHSO in effect"), then all sets of land and hold short lights must be on. If the ATIS broadcast contains specific hold short points (for example, "Expect landing on Runway 22 to hold short of Runway 27"), then only those sets of land and hold short lights must be on.
d. Vertical Guidance.
(1) Air carrier and/or mixed LAHSO are only authorized on a runway that has electronic or visual glide slope indicator (PAPI or VASI).
(2) Air carrier and/or mixed nighttime LAHSO may only be conducted with visual glide slope indicator (PAPI or VASI).
e. A LAHSO clearance must only be issued to specified aircraft listed in FAA Order JO 7360.1, Aircraft Type Designators. In addition, a LAHSO clearance must only be issued to an aircraft and/or operator listed in accordance with paragraphs 11.b.(3) and (4) of this order. LAHSO operations involving helicopters may be authorized upon operator request. An eligible aircraft stopping distance list for each LAHSO configuration must be placed at all affected positions. Use of automated display tools fulfills this requirement.
01/30/16 7110.118A NOTE- Controllers should be aware that pilots may not be able to accept a LAHSO clearance below 1,000 feet above ground level.
f. When arriving pilots identify themselves to the local controller as a solo student pilot, that pilot must not be issued a LAHSO clearance.
g. When LAHSO operations are expected to be utilized, an announcement must be made on the ATIS; for example, "LAHSO in effect" or "Expect landing on Runway 22 to hold short of Runway 27." Local LAHSO development teams will determine whether to broadcast ALDs on the ATIS.
h. When LAHSO is conducted at locations not served by an ATIS, or the ATIS is out of service, pilots must be advised on initial contact, or as soon as practicable thereafter, to expect a LAHSO clearance.
i. Aircraft conducting closed traffic operations need only be advised once that "LAHSO is in effect." Acknowledgment of the current ATIS meets this requirement.
j. Traffic information must be exchanged, and a read-back must be obtained from the landing aircraft with a LAHSO clearance.
k. Aircraft/vehicles may be allowed to cross the portion of the runway surface beyond the hold short point. The pilot/operator must be informed of the landing traffic, and acknowledge the crossing restriction. All other operations beyond the hold short point are prohibited.
l. LAHSO must be terminated for any situation or weather condition that, in the judgment of the airport traffic control tower supervisor/controller in charge, would adversely affect LAHSO.
10. Letters of Agreement. Conducting LAHSO, in accordance with the provisions of this order, requires that airport operators agree to undertake specific actions, including the installation and maintenance of required markings, signs, and in-pavement lighting. This involves a considerable capital investment and imposes specific responsibilities and obligations on the airport operator. In order to ensure that LAHSO is conducted safely and in strict accordance with the provisions of this order, and to ensure that airport operators agree and are fully aware of their responsibilities, formal, signed LOAs between the airport operator and the ATC facility manager are required for the approval and implementation of LAHSO. A sample LOA is attached as appendix A of this order. LOAs must address, as a minimum, the following:
a. Procedures for use of LAHSO at their specific localities.
b. Installation and maintenance of required markings, signs, and lighting.
c. Determination of the measured length of the ALD.
d. Coordination procedures for prompt exchange of required information (for example, periodic friction measurements, inoperative lights, pilot reports, braking action reports, etc.).
11. Responsibilities.
a. ATO, Mission Support Services is responsible for:
(1) Incorporating the applicable standards, procedures, criteria, and requirements contained in this order into appropriate ATO documents.
(2) Publishing appropriate pilot information for LAHSO in the Aeronautical Information Manual (AIM).
01/30/16 7110.118A b. Air traffic managers are responsible for:
(1) Organizing a LAHSO development team consisting of representatives from Air Traffic Services, the Flight Standards District Office (FSDO), the Airports District Office, airport management, local National Air Traffic Controllers Association, and airport user representative(s). This team must operate under the guidelines of this order.
(2) Determining that a valid operational need exists before developing procedures applicable to LAHSO. Such factors as, capacity, efficiency, user input, etc., should be considered in making this determination.
(3) Preparing a list of aircraft types authorized to participate for each configuration utilized at the facility. The list must be readily available for controller use prior to operational use of LAHSO.
(4) Preparing a list of FAR Parts 121, 125, 129, and 135 operators authorized to participate in LAHSO at the airport. The list must be readily available for controller use prior to operational use of LAHSO.
(5) Providing a listing of runways authorized for LAHSO, along with the appropriate ALD, for publication in the Airport/Facilities Directory and appropriate flight procedures publications. On a temporary basis, a notice to airmen (NOTAM) may be issued in lieu of the above.
(6) Crafting a memorandum for the record signed by all parties that participated in the development of the LAHSO procedures.
(7) Coordinating with the appropriate FSDO, airport management, fixed based operators, and representatives of the aviation community while developing a LAHSO program.
(8) Providing a list of appropriate landing distances for all aircraft participating in LAHSO. This list must be readily available for controller use prior to operational use of LAHSO.
(9) Conducting an annual review of the LAHSO program to validate its continued need and convening a local development team to review all LAHSO events and forward a report through the OSG to headquarters.
c. Flight Standards (AFS) is responsible for:
(1) Incorporating applicable standards, procedures, criteria, and requirements into appropriate AFS documents.
(2) Initiating international coordination efforts to update International Civil Aviation Organization (ICAO) Annex 6, Operation of Aircraft, to include LAHSO procedures.
(3) Developing appropriate information on flight procedures for incorporation into the AIM.
(4) Providing guidance materials needed to reach and educate both the pilot community and FAA inspectors concerning proper LAHSO procedures.
(5) Approving all air carrier LAHSO training procedures, including any special or unique goaround procedures resulting from a rejected landing.
(6) Requiring the Aviation Safety Program to develop educational programs and other initiatives to reach the general aviation pilot population concerning proper procedures and safety concerns when conducting LAHSO.
(7) Recommending what LAHSO subject matter should be included in appropriate flight training curriculums under FAR Part 141, and in the curriculums for certificated flight instructor revalidation clinics.
01/30/16 7110.118A (8) Providing air traffic service information relative to aircraft performance required for conducting LAHSO. AFS will provide support, as outlined in FAA Order JO 7210.3, Facility Operation and Administration, Paragraph 10-3-7, Land and Hold Short Operations (LAHSO). AFS will support identification of eligible aircraft for operating within assigned air traffic service groups for use by controllers as a planning tool.
(9) Participating in local LAHSO development teams and approving Letters of Authorization (LOAs) at the regional level. The regional NextGen Branch will approve all LOAs with Air Carrier Operations. If only non-air carrier operations are to be used at an airport the local FSDO will approve the LOA.
d. Office of Airport Safety and Standards (AAS) is responsible for:
(1) Incorporating applicable standards, procedures, criteria, and requirements contained in this order into the appropriate documents.
(2) Initiating international coordination efforts to update ICAO Annex 14, Visual Aids.
(3) Publishing technical standards, siting specifications, and guidance for the design and installation of all hold short position markings, signs, and in-pavement lighting, as required by this order.
(4) Publishing standards and guidance for maintaining skid-resistant pavements and for publishing standards and guidance for evaluating these pavements with friction measuring equipment.
(5) Developing appropriate information on visual aids for incorporation into the AIM.
(6) Providing instructions to airport certification inspectors for reviewing and inspecting hold short position markings, signs, and lights required for LAHSO at certificated airports.
e. ATO Safety and Technical Training (AJI) is responsible for:
(1) Maintaining/updating development of a risk assessment for LAHSO that considers safety of operations.
(2) Providing analytical support essential to continuing trend analysis of site-specific incidents/accidents involving LAHSO.
(3) Coordinating with AFS the publication of supplemental guidance and criteria to define and systematically collect LAHSO pilot deviation reports.
(4) Participating in LAHSO program testing.
12. Distribution. This order is distributed to the Air Traffic Services Organization and all associated air traffic control facilities, ATO Safety and Technical Training (AJI), Flight Standards District Offices, and Airport District Offices.
13. Background. LAHSO operations include landing and holding short of an intersecting runway, an intersecting taxiway, or some other predetermined point on the runway other than on a runway or taxiway. Previously, simultaneous operations on intersecting runways (SOIR), was used exclusively to describe simultaneous operations on two intersecting runways - either two aircraft landing simultaneously or one aircraft landing and another one departing. The term “LAHSO” incorporates SOIR and is expanded to include holding short of a taxiway and holding short of predetermined points on the runway. The additional operations outlined under this order are for those airports that need additional tools to decrease delays. This order sets the standards for conducting the following LAHSO combinations:
a. Landing and holding short of an intersecting runway.
b. Landing and holding short of an intersecting taxiway.
01/30/16 7110.118A c. Landing and holding short of an approach/departure flight path.
d. Landing and holding short of a predetermined point.
14. Definitions. The following terms and their definitions are used throughout this order.
a. Air Carrier Operation - Air carrier and commuter aircraft operating under 14 CFR Parts 121, 125, 129 and 135.
b. Available Landing Distance (ALD) - That portion of a runway available for landing and rollout for aircraft cleared for LAHSO. This distance is measured from the landing threshold to the hold short point.
c. Contaminated Runway - For the purpose of this order, a runway is considered contaminated whenever standing water, ice, snow, slush, frost in any form, heavy rubber deposits, or other substances are present. A runway is contaminated with respect to rubber deposits or other friction degrading substances when the average friction value for any 500-foot segment of the runway within the ALD falls below the recommended minimum friction level, and the average friction value in the adjacent 500-foot segment falls below the maintenance planning friction level.
d. Dry Runway - No visible moisture present. The runway must be free of contaminates.
e. Hold Short Point - A point on the runway beyond which a landing aircraft with a LAHSO clearance is not authorized to proceed.
f. Hold Short Position Marking - The painted runway holding position marking located at the hold short point on all LAHSO runways.
g. Hold Short Position Signs - Red and white holding position signs located alongside the hold short point.
h. Land and Hold Short Operations (LAHSO) - These operations include landing and holding short of an intersecting runway, taxiway, predetermined point, or approach/departure flight path.
i. Land and Hold Short Lights - Six or seven in-pavement, pulsing white lights at the LAHSO hold short point.
j. Mixed Operations - LAHSO conducted between an air carrier and any other type of aircraft operation.
k Rejected Landing - For the purpose of LAHSO, a rejected landing is when the pilot in command elects to go around. In the event of a rejected landing on a configuration not requiring a RLP, normal pilot/controller responsibilities remain unchanged.
l. Rejected Landing Procedure (RLP) - A published, predetermined heading to be used in the event of a rejected landing. Unless alternate instructions are given by ATC, pilots are expected to execute the procedure as published and remain clear of clouds.
m. Vertical Guidance - Guidance received from electronic or visual glideslope. Visual glideslope may be precision approach indicator (PAPI) or visual approach slope indicator (VASI).
Original signed by/ Heather Hemdal November 5, 2015 Director, Air Traffic Standards and Procedures Air Traffic Organization Date Signed
7110.118A Appendix A
Appendix A. Sample Letter of Agreement
Letter of Agreement (LOA) Between the Federal Aviation Administration (FAA)
and Metropolitan Airport Authority (MAA)
Appendix A. Sample Letter of Agreement
1. Purpose.
This agreement delineates the responsibilities of the FAA and MAA that are necessary for initiating and carrying out land and hold short operations (LAHSO) on specified runways at the Metropolitan Airport.
2. Background.
LAHSO is an air traffic control procedure which permits the issuance of landing clearances to aircraft to land and hold short of an intersecting runway, taxiway, or other designated point on the runway. It is a procedure designed to increase airport capacity and to more efficiently move aircraft within the terminal airspace and on the airport surface.
3. Approved LAHSO Runways/Locations.
The following runway hold short locations are approved for conducting LAHSO at Metropolitan Airport:
Runway Designation Location Designation
10 L Prior to Runway 15/33 intersection Day
10 L Prior to Runway 15/33 intersection Day
10R Prior to Runway 15/33 intersection Day, night
11R Prior to Taxiway B1 intersection Day, night
15R Prior to Runway 10R/28L intersection Day
15L Designated Point “HS-1” depicted on Attachment “1”
Day
4. Responsibilities of MAA.
In order to conduct LAHSO at the Metropolitan Airport, the MAA agrees to be responsible for the following actions:
a. Installing LAHSO runway markings and signs at all of the above specified locations in accordance with FAA Advisory Circular (AC) 150/5340-1, Standards for Airport Markings, and AC 150/5340-18, Standards for Airport Sign Systems.
b. Providing FAA with distance measurements from the landing runway threshold to the LAHSO runway position marking at each specified LAHSO location.
c. Installing a LAHSO in-pavement lighting system at all LAHSO locations. The lighting system shall be designed and installed in accordance AC 150/5340-29, Installation Details for Land and Hold Short Lighting Systems.
d. Notifying the FAA airport traffic control tower whenever runway markings, signs, and/or lighting systems are inoperative.
7110.118A Appendix A
5. Responsibilities of FAA Air Traffic Control.
In conducting LAHSO at Metropolitan Airport, the FAA shall be responsible for the following:
a. Publishing a list of runways at the Metropolitan Airport that are approved for LAHSO, together with the available landing distance for each hold-short location.
b. Terminating LAHSO on any approved runway location whenever MAA reports that signs and markings are not installed or are not in accordance with this order.
c. Terminating LAHSO at any location when, in the judgment of the air traffic manager, conditions are such that an unsafe operation may result.
d. Issuing appropriate notices to airmen relating to LAHSO.
e. Meet annually or as necessary to review events. … … John M. Doe Mary K. Smith Manager, Metropolitan Airport Tower Metropolitan Airport Manager Federal Aviation Administration Date: … Date: …