FAA-S-ACS-11A Airline Transport Pilot and Type Rating for Airplane Category Airman Certification Standards
Airline Transport Pilot and Type Rating for
Airplane Category Airman Certification Standards
FAA-S-ACS-11A
Flight Standards Service
Washington, DC 20591
November 2023
Airline Transport Pilot and Type Rating for Airplane Category ACS (FAA-S-ACS-11A) i
Foreword
The U.S. Department of Transportation, Federal Aviation Administration (FAA), Office of Safety Standards, Regulatory Support Division, Airman Testing Standards Branch has published the Airline Transport Pilot (ATP) for Airplane Category Airman Certification Standards (ACS) to communicate the aeronautical knowledge, risk management, and flight proficiency standards for ATP pilot and type rating certification in the airplane category.
This ACS is available for download, in PDF format, from www.faa.gov.
Comments regarding this ACS may be emailed to [email protected].
The FAA created FAA-G-ACS-2, Airman Certification Standards Companion Guide for Pilots, to provide guidance considered relevant and useful to the community. The number of appendices in the ACS was reduced and much of the non-regulatory material was moved to the Airman Certification Standards Companion Guide for Pilots. Applicants, instructors, and evaluators should consult this companion guide to familiarize themselves with ACS procedures. FAA-G-ACS-2 is available for download, in PDF format, from www.faa.gov.
Airline Transport Pilot and Type Rating for Airplane Category ACS (FAA-S-ACS-11A) ii
Revision History
Document # Description Date
FAA-S-8081-5F Airline Transport Pilot and Aircraft Type Rating Practical Test Standards for Airplane July 2008
FAA-S-ACS-11 Airline Transport Pilot and Type Rating for Airplane Airman Certification Standards May 10, 2019
FAA-S-ACS-11 Airline Transport Pilot and Type Rating for Airplane Airman Certification Standards (Change 1) May 28, 2019
FAA-S-ACS-11A Airline Transport Pilot and Type Rating for Airplane Category Airman Certification
Standards
November 2023
Airline Transport Pilot and Type Rating for Airplane Category ACS (FAA-S-ACS-11A) iii
Major Enhancements to FAA-S-ACS-11A
• The following ACS codes have been added:
AA.I.C.K2a AA.I.C.K2b AA.I.C.K2c AA.I.C.K2d AA.I.C.K2e AA.I.C.K2f
AA.I.C.K2g AA.I.F.R4 AA.I.G.K7 AA.I.H.K1i AA.II.C.R6 AA.II.D.R6
AA.II.D.R7 AA.IV.B.R4 AA.IV.B.R5 AA.IV.B.R6 AA.IV.B.R7 AA.IV.B.R8
AA.IV.B.R9 AA.VI.F.R10 AA.VI.F.R11 AA.VI.H.R8 AA.VI.H.R9
• The following ACS codes have been removed and archived. Please see the Airman Certification Standards Companion Guide for Pilots (FAA-G-ACS-2) for more information.
AA.IV.B.R2 AA.V.A.S2 AA.V.B.S2
AA.V.C.S2 AA.VI.F.R3 AA.VI.F.R3a
AA.VI.F.R3b AA.VI.H.R3 AA.VI.H.R3a
AA.VI.H.R3b AA.VIII.A.R2 AA.VIII.B.R2
• Non-regulatory material has been moved from the appendices to the Airman Certification Standards Companion Guide for Pilots (FAA-G-ACS-2).
• Legends have been added to the Additional Ratings Task Tables.
iv Airline Transport Pilot and Type Rating for Airplane Category ACS (FAA-S-ACS-11A)
Table of Contents
Introduction
Airman Certification Standards Concept … 1
Area of Operation I. Preflight Preparation
Task A. Operation of Systems … 2 Task B. Performance and Limitations … 3 Task C. Weather Information (ATP) … 5 Task D. High-Altitude Aerodynamics (ATP) (AMEL, AMES) … 6 Task E. Air Carrier Operations (ATP) (AMEL, AMES) … 7 Task F. Human Factors (ATP) … 8 Task G. The Code of Federal Regulations (CFR) (ATP) … 9
Task H. Water and Seaplane Characteristics, Seaplane Bases, Maritime Rules, and Aids to Marine
Navigation (ASES, AMES) … 10
Area of Operation II. Preflight Procedures
Task A. Preflight Assessment … 12 Task B. Powerplant Start … 13 Task C. Taxiing (ASEL, AMEL) … 14 Task D. Taxiing and Sailing (ASES, AMES) … 15 Task E. Before Takeoff Checks … 16
Area of Operation III. Takeoffs and Landings
Task A. Normal Takeoff and Climb … 18 Task B. Normal Approach and Landing … 19 Task C. Glassy Water Takeoff and Climb (ASES, AMES) … 20 Task D. Glassy Water Approach and Landing (ASES, AMES) … 22 Task E. Rough Water Takeoff and Climb (ASES, AMES) … 23 Task F. Rough Water Approach and Landing (ASES, AMES) … 24 Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES) … 25 Task H. Confined Area Approach and Landing (ASES, AMES) … 26 Task I. Rejected Takeoff … 27 Task J. Go-Around/Rejected Landing … 28
Area of Operation IV. In-flight Maneuvers
Task A. Steep Turns … 30 Task B. Recovery from Unusual Flight Attitudes … 31 Task C. Specific Flight Characteristics … 31
v
Table of Contents
Area of Operation V. Stall Prevention
Task A. Partial Flap Configuration Stall Prevention … 33 Task B. Clean Configuration Stall Prevention … 34 Task C. Landing Configuration Stall Prevention … 35
Area of Operation VI. Instrument Procedures
Task A. Instrument Takeoff … 37 Task B. Departure Procedures … 38 Task C. Arrival Procedures … 39 Task D. Non-precision Approaches … 40 Task E. Precision Approaches … 41 Task F. Landing from a Precision Approach … 43 Task G. Circling Approach … 44 Task H. Landing from a Circling Approach … 45 Task I. Missed Approaches … 46 Task J. Holding Procedures … 47
Area of Operation VII. Emergency Operations
Task A. Emergency Procedures … 49 Task B. Powerplant Failure During Takeoff … 50 Task C. Powerplant Failure (Simulated) (ASEL, ASES) … 51 Task D. Inflight Powerplant(s) Failure and Restart (AMEL, AMES) … 52 Task E. Approach and Landing with a Powerplant Failure (Simulated) (AMEL, AMES) … 53 Task F. Precision Approach (Manually Flown) with a Powerplant Failure (Simulated) (AMEL, AMES) … 54 Task G. Landing from a No Flap or a Nonstandard Flap Approach … 55
Area of Operation VIII. Postflight Procedures
Task A. After Landing, Parking, and Securing (ASEL, AMEL) … 57 Task B. Seaplane Post-Landing Procedures (ASES, AMES) … 57
Appendix 1: Practical Test Roles, Responsibilities, and Outcomes
Eligibility Requirements for an Airline Transport Pilot Certificate … 59 Use of the ACS During a Practical Test … 59 Instructor Responsibilities … 61 Evaluator Responsibilities … 61 Possible Outcomes of the Test … 61 ATP Certificate Task Table … 63 Addition of a Type Rating to an Existing Pilot Certificate and Proficiency Check Requirements … 64 Addition of a VFR Only Type Rating to an Existing Pilot Certificate … 64 Removal of the “Second in Command Required” Limitation from a Type Rating … 65 Removal of Circle-to-Land Limitation on an ATP Certificate or Type Rating … 65
vi
Table of Contents
Airplane Multiengine Land Limited to Center Thrust … 65
Appendix 2: Safety of Flight
General … 67 Stall and Spin Awareness … 67 Use of Checklists … 67 Positive Exchange of Flight Controls … 67 Use of Distractions … 67 Aeronautical Decision-Making, Risk Management, Crew Resource Management, and Single-Pilot
Resource Management … 67 Multiengine Considerations … 68 Single-Engine Considerations … 68 High-Performance Airplane Considerations … 68
Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations
Aircraft Requirements & Limitations … 69 Equipment Requirements & Limitations … 69 Use of Flight Simulation Training Devices (FSTD) … 69 Credit for Pilot Time in an FSTD … 69 Use of Aviation Training Devices (ATD) … 69 Credit for Pilot Time in an ATD … 70 Operational Requirements, Limitations, & Task Information … 70
1 Airline Transport Pilot and Type Rating for Airplane Category ACS (FAA-S-ACS-11A)
Introduction › Airman Certification Standards Concept
Introduction
Airman Certification Standards Concept
The goal of the airman certification process is to ensure the applicant possesses the knowledge, ability to manage risks, and skill consistent with the privileges of the certificate or rating being exercised, in order to act as pilot-in-command (PIC).
Safe operations in today’s National Airspace System (NAS) require the integration of aeronautical knowledge, risk management, and flight proficiency standards. To accomplish these goals, the FAA drew upon the expertise of organizations and individuals across the aviation and training community to develop the ACS. The ACS integrates the elements of knowledge, risk management, and skill required for each airman certificate or rating. It thus forms a more comprehensive standard for what an applicant must know, consider, and do to demonstrate proficiency to pass the tests required for issuance of the applicable airman certificate or rating.
Area of Operation I. Preflight Preparation › Task A. Operation of Systems
Area of Operation I. Preflight Preparation
Area of Operation I. Preflight Preparation
Task A. Operation of Systems
References: AC 90-117, AC 91.21-1, AC 91-78, AC 120-76; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with aircraft systems and their components; and their normal, abnormal, and emergency procedures.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.A.K1 Landing gear–extension/retraction system(s), indicators, float devices, brakes, antiskid, tires, nosewheel steering, and shock absorbers.
AA.I.A.K2 Powerplant–controls and indications, induction system, carburetor and fuel injection, turbocharging, cooling, mounting points, turbine wheels, compressors, deicing, anti-icing, and other related components.
AA.I.A.K3 Propellers–type, controls, feathering/unfeathering, auto-feather, negative torque sensing, synchronizing, synchrophasing, and thrust reverse, including uncommanded reverse procedures.
AA.I.A.K4 Fuel system–capacity, drains, pumps, controls, indicators, cross-feeding, transferring, jettisoning, fuel grade, color and additives, fueling and defueling procedures, and fuel substitutions.
AA.I.A.K5 Oil system–capacity, allowable types of oil, quantities, and indicators.
AA.I.A.K6 Hydraulic system–capacity, pumps, pressure, reservoirs, allowable types of fluid, and regulators.
AA.I.A.K7 Electrical system–alternators, generators, batteries, circuit breakers and protection devices, controls, indicators, and external and auxiliary power sources and ratings.
AA.I.A.K8 Pneumatic and environmental systems–heating, cooling, ventilation, oxygen, pressurization, supply for ice protection systems, controls, indicators, and regulating devices.
AA.I.A.K9 Avionics and communications–autopilot, flight director, Electronic Flight Instrument Systems (EFIS), Flight Management System (FMS), Electronic Flight Bag (EFB), Radar, Inertial Navigation Systems (INS), Global Navigation Satellite System (GNSS), Space-Based Augmentation System (SBAS), Ground-Based Augmentation System (GBAS), ground-based navigation systems and components, Automatic Dependent Surveillance – Broadcast (ADS-B) In and Out, Automatic Dependent Surveillance – Contract (ADS-C), traffic awareness/warning/avoidance systems, terrain awareness/ warning/alert systems, communication systems (e.g., data link, Ultra High Frequency (UHF)/Very High Frequency (VHF)/High Frequency (HF), satellite), Controller Pilot Data Link Communication (CPDLC), indicating devices, transponder, and emergency locator transmitter, Head Up-Display (HUD).
AA.I.A.K10 Ice protection–anti-ice, deice, pitot-static system protection, turbine inlet, propeller, windshield, airfoil surfaces, and other related components.
AA.I.A.K11 Crewmember and passenger equipment–oxygen system, survival gear, emergency exits, evacuation procedures and crew duties, quick donning oxygen mask for crewmembers, passenger oxygen system.
AA.I.A.K12 Flight controls–ailerons, elevator(s), rudder(s), control tabs, control boost/augmentation systems, flaps, spoilers, leading edge devices, speed brakes, stability augmentation system (e.g., yaw damper), and trim systems.
AA.I.A.K13 Pitot-static system–associated instruments and the power source for those flight instruments. Operation and power sources for other flight instruments.
Area of Operation I. Preflight Preparation
AA.I.A.K14 Fire & smoke detection, protection, and suppression–powerplant, cargo and passenger compartments, lavatory, pneumatic and environmental, electrical/avionics, and batteries (on aircraft and personal electronic devices).
AA.I.A.K15 Envelope protection–angle of attack warning and protection, and speed protection.
AA.I.A.K16 The contents of the Pilot Owner's Handbook (POH) or Airplane Flight Manual (AFM) with regard to the systems and components in the airplane.
AA.I.A.K17 How to use a Minimum Equipment List (MEL) and a Configuration Deviation List (CDL).
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.A.R1 Detection of system malfunctions or failures.
AA.I.A.R2 Management of a system failure.
AA.I.A.R3 Monitoring and management of automated systems.
AA.I.A.R4 Following checklists or procedures.
Skills: For the airplane provided for the practical test, the applicant demonstrates the ability to:
AA.I.A.S1 Explain and describe the operation of the aircraft systems and components using correct terminology.
AA.I.A.S2 Recall immediate action items or memory items, if appropriate.
AA.I.A.S3 Identify system or component limitations listed in the POH/AFM.
AA.I.A.S4 Demonstrate or describe, as appropriate, the process for deferring inoperative equipment (e.g., MEL) and using a CDL.
AA.I.A.S5 Comply with operations specifications, management specifications, and letters of authorization, if applicable.
AA.I.A.S6 Through the use of the appropriate checklists and normal and abnormal procedures, demonstrate the proper use of the aircraft systems, subsystems, and devices, as determined by the evaluator.
Area of Operation I. Preflight Preparation › Task B. Performance and Limitations
Task B. Performance and Limitations
References: 14 CFR parts 1, 91; AC 20-117, AC 61-107, AC 61-138, AC 91-74, AC 91-79, AC 120-27, AC 120- 58, AC 120-60, AC 135-17; AIM; Chart Supplements; FAA-H-8083-1, FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; SAFO 19001
Objective: To determine that the applicant exhibits satisfactory knowledge, risk management, and skills associated with operating an aircraft safely within its operating envelope.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.B.K1 Elements related to performance and limitations by explaining the use of charts, tables, and data to determine performance.
AA.I.B.K2 How to determine the following, as applicable to the class sought:
AA.I.B.K2a a. Accelerate-stop / accelerate-go distance
AA.I.B.K2b b. Takeoff performance [e.g., balance field length and Velocity, Minimum Control (ground) (VMCG)]
Area of Operation I. Preflight Preparation
AA.I.B.K2c c. Climb performance
AA.I.B.K2d d. Cruise performance (e.g., optimum and maximum operating altitudes)
AA.I.B.K2e e. Descent performance
AA.I.B.K2f f. Landing performance
AA.I.B.K2g g. Performance with an inoperative powerplant for all phases of flight (AMEL, AMES)
AA.I.B.K2h h. Weight and balance and how to shift weight
AA.I.B.K3 Factors affecting performance, including:
AA.I.B.K3a a. Atmospheric conditions
AA.I.B.K3b b. Pilot technique
AA.I.B.K3c c. Aircraft configuration (e.g., flap setting)
AA.I.B.K3d d. Airport environment (e.g., runway condition, land and hold short operations (LAHSO))
AA.I.B.K3e e. Loading (e.g., center of gravity)
AA.I.B.K3f f. Aircraft weight
AA.I.B.K4 Aerodynamics and how it relates to performance.
AA.I.B.K5 Adverse effects of exceeding an airplane limitation or the aircraft operating envelope.
AA.I.B.K6 Effects of icing on performance.
AA.I.B.K7 Clean wing concept; deicing and anti-icing procedures, including use of appropriate deice fluid, holdover tables, calculating hold-over times, and pre-takeoff contamination checks.
AA.I.B.K8 Air carrier weight and balance systems (e.g., average weight program). Air Transport Pilot (ATP) (AMEL, AMES).
AA.I.B.K9 Runway assessment and condition reporting and use of the Runway Condition Assessment Matrix (RCAM). (ATP)(AMEL, AMES).
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.B.R1 Use of performance charts, tables, and data.
AA.I.B.R2 Airplane limitations.
AA.I.B.R3 Possible differences between calculated performance and actual performance.
AA.I.B.R4 Airplane icing and its effect on performance and stall warning.
AA.I.B.R5 Runway excursions.
Skills: For the airplane provided for the practical test, the applicant demonstrates the ability to:
AA.I.B.S1 Describe the airspeeds used during specific phases of flight.
AA.I.B.S2 Describe the effects of meteorological conditions on performance for all phases of flight and correctly apply these factors to a specific chart, table, graph, or other performance data.
AA.I.B.S3 Describe the procedures for wing contamination recognition and any deice/anti-ice procedures prior to takeoff.
Area of Operation I. Preflight Preparation
AA.I.B.S4 Explain the adverse effects of airframe icing during all phases of flight. Describe any operating limitations for flight in icing conditions. If equipped, describe the procedures for deicing and anti-icing system use and their effects on performance.
AA.I.B.S5 Compute weight and balance, including practical techniques to resolve out-of-limits calculations for a representative scenario, as specified by the evaluator.
AA.I.B.S6 Determine the computed center-of-gravity is within the acceptable limits and the lateral fuel balance is within limits for takeoff and landing.
AA.I.B.S7 Demonstrate proficient use of appropriate performance charts, tables, graphs, or other data to determine airplane performance and limitations for all phases of flight.
Area of Operation I. Preflight Preparation › Task C. Weather Information (ATP)
Task C. Weather Information (ATP)
References: 14 CFR part 91; AC 61-107, AC 61-138, AC 91-74, AC 91-92; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-16, FAA-H-8083-25, FAA-H-8083-28
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with obtaining, understanding, and applying weather information for a flight under IFR.
Note: If K2 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Note: If K3 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Note: See Appendix 1: Practical Test Roles, Responsibilities, and Outcomes and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.C.K1 Sources of weather data (e.g., National Weather Service, Flight Service) for flight planning purposes.
AA.I.C.K2 Acceptable weather products and resources required for preflight planning, current and forecast weather for departure, en route, and arrival phases of flight such as:
AA.I.C.K2a a. Airport Observations (METAR and SPECI) and Pilot Observations (PIREP)
AA.I.C.K2b b. Surface Analysis Chart, Ceiling and Visibility Chart (CVA)
AA.I.C.K2c c. Terminal Aerodrome Forecasts (TAF)
AA.I.C.K2d d. Graphical Forecasts for Aviation (GFA)
AA.I.C.K2e e. Wind and Temperature Aloft Forecast (FB)
AA.I.C.K2f f. Convective Outlook (AC)
AA.I.C.K2g g. Inflight Aviation Weather Advisories including Airmen's Meteorological Information (AIRMET),
Significant Meteorological Information (SIGMET), and Convective SIGMET
AA.I.C.K3 Meteorology applicable to the departure, en route, alternate, and destination for flights conducted under Instrument Flight Rules (IFR) to include expected climate and hazardous conditions such as:
AA.I.C.K3a a. Atmospheric composition and stability
AA.I.C.K3b b. Wind (e.g., windshear, mountain wave, factors affecting wind, etc.)
AA.I.C.K3c c. Temperature and heat exchange
AA.I.C.K3d d. Moisture/precipitation
AA.I.C.K3e e. Weather system formation, including air masses and fronts
Area of Operation I. Preflight Preparation
AA.I.C.K3f f. Clouds
AA.I.C.K3g g. Turbulence
AA.I.C.K3h h. Thunderstorms and microbursts
AA.I.C.K3i i. Icing and freezing level information
AA.I.C.K3j j. Fog/mist
AA.I.C.K3k k. Frost
AA.I.C.K3l l. Obstructions to visibility (e.g., smoke, haze, volcanic ash, etc.)
AA.I.C.K4 Flight deck displays of digital weather and aeronautical information, their use to navigate around weather, and equipment limitations.
AA.I.C.K5 Low-visibility operations (e.g., surface movement, category II and III approaches). (ATP)(AMEL, AMES).
AA.I.C.K6 Flight Risk Assessment Tools.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.C.R1 Weather conditions involved in departure and in-flight decision making, to include:
AA.I.C.R1a a. Circumstances requiring a change in course or destination
AA.I.C.R1b b. Known or forecast icing, winds or turbulence aloft, volcanic ash, destination weather, etc.
AA.I.C.R1c c. Personal weather minimums
AA.I.C.R1d d. Operator specified or aircraft operational limitations, if applicable
AA.I.C.R2 Use and limitations of:
AA.I.C.R2a a. Installed onboard weather equipment
AA.I.C.R2b b. Aviation weather reports and forecasts
AA.I.C.R2c c. Inflight weather resources
Skills: The applicant exhibits the skill to:
AA.I.C.S1 Interpret weather information, apply principles of aeronautical decision-making, and use a Flight Risk Assessment Tool, if available.
Area of Operation I. Preflight Preparation › Task D. High-Altitude Aerodynamics (ATP) (AMEL, AMES)
Task D. High-Altitude Aerodynamics (ATP) (AMEL, AMES)
References: AC 61-107, AC 61-138, AC 120-111; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with high altitude airplane aerodynamics.
Note: See Appendix 1: Practical Test Roles, Responsibilities, and Outcomes and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.D.K1 Aerodynamics of large transport category airplanes, including flight characteristics of swept wing airplanes (e.g., Mach buffet).
Area of Operation I. Preflight Preparation
AA.I.D.K2 Energy management.
AA.I.D.K3 Relationship between Mach number, indicated airspeed, true airspeed, and change over altitudes.
AA.I.D.K4 Load factor at high altitude and its effect on high and low speed operating margins.
AA.I.D.K5 Relationship between altitude capability, weight, and temperature.
AA.I.D.K6 Maximum Operating Speed - Knots (VMO) / Maximum Operating Speed - Mach (MMO) convergence and stall angle of attack.
AA.I.D.K7 Maximum Lift over Drag Ratio (L/DMAX).
AA.I.D.K8 Best range and best endurance.
AA.I.D.K9 Factors which contribute to airplane upsets at high altitude and upset prevention and recovery techniques.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.D.R1 Managing the airplane’s energy state.
AA.I.D.R2 High operating altitudes at high operational weights.
AA.I.D.R3 High altitude slow-downs and excursions behind the power curve.
AA.I.D.R4 Turbulence at high altitude.
Skills: The applicant exhibits the skill to:
AA.I.D.S1 If a cruise altitude is reached, manage the airplane’s systems and energy state.
Area of Operation I. Preflight Preparation › Task E. Air Carrier Operations (ATP) (AMEL, AMES)
Task E. Air Carrier Operations (ATP) (AMEL, AMES)
References: 14 CFR parts 25, 121; AC 00-46, AC 61-138, AC 91.21-1, AC 91-78, AC 120-51, AC 120-66, AC 120-76, AC 120-82, AC 120-90, AC 120-101; AFM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with air carrier operations.
Note: See Appendix 1: Practical Test Roles, Responsibilities, and Outcomes and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.E.K1 Turbine engines, thrust reversing systems, and system malfunctions.
AA.I.E.K2 Airplane automation components (e.g., flight director, autopilot), their relationship to each other, and how to manage the automation for flight.
AA.I.E.K3 Advanced navigation equipment (e.g., FMS, Required Navigation Performance (RNP), ADS-B, EFB, etc.) and how it is used inflight.
AA.I.E.K4 Flightpath warning systems (e.g., Traffic Alert and Collision Avoidance Systems (TCAS), Terrain Awareness and Warning System (TAWS) and how to respond to a warning.
AA.I.E.K5 Altitudes and conditions that require the use of oxygen masks.
AA.I.E.K6 Causes and recognition of cabin pressure loss.
Area of Operation I. Preflight Preparation
AA.I.E.K7 Appropriate rudder use in transport aircraft to avoid rudder reversal.
AA.I.E.K8 Crew communications (e.g., sterile flight deck rules, briefings).
AA.I.E.K9 Operational control.
AA.I.E.K10 Elements associated with operating at complex and high traffic airports with emphasis on runway incursion prevention techniques.
AA.I.E.K11 Professional responsibilities associated with being an ATP certificate holder and how to apply leadership skills as pilot-in-command.
AA.I.E.K12 Crew resource management (CRM) principles and application in a multi-crew environment.
AA.I.E.K13 Use of safety programs to manage risk across an organization (e.g., Threat and error management (TEM), or Aviation Safety Action Program (ASAP)).
AA.I.E.K14 Operations specifications.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.E.R1 Turbine engine and thrust reversing system malfunctions.
AA.I.E.R2 Managing automation and navigation equipment.
AA.I.E.R3 Responding to a flightpath warning system alert.
AA.I.E.R4 Loss of cabin pressure.
AA.I.E.R5 Crew coordination.
Skills: The applicant exhibits the skill to:
AA.I.E.S1 Apply CRM principles and use in a crew environment, as appropriate.
Area of Operation I. Preflight Preparation › Task F. Human Factors (ATP)
Task F. Human Factors (ATP)
References: AC 60-22, AC 61-107, AC 61-138, AC 120-51, AC 120-100; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with personal health, flight physiology, and aeromedical and human factors related to safety of flight.
Note: If K1 is selected, the evaluator must assess the applicant's knowledge of at least three sub-elements.
Note: See Appendix 1: Practical Test Roles, Responsibilities, and Outcomes and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.F.K1 Causes, effects, recognition, and corrective actions associated with aeromedical and physiological issues, including:
AA.I.F.K1a a. Hypoxia
AA.I.F.K1b b. Hyperventilation
AA.I.F.K1c c. Middle ear and sinus problems
AA.I.F.K1d d. Spatial disorientation
Area of Operation I. Preflight Preparation
AA.I.F.K1e e. Motion sickness
AA.I.F.K1f f. Carbon monoxide poisoning
AA.I.F.K1g g. Stress
AA.I.F.K1h h. Fatigue
AA.I.F.K1i i. Dehydration and nutrition
AA.I.F.K1j j. Hypothermia
AA.I.F.K1k k. Optical illusions
AA.I.F.K1l l. Dissolved nitrogen in the bloodstream after scuba dives
AA.I.F.K2 Effects of alcohol, drugs, and over-the-counter medications.
AA.I.F.K3 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.
AA.I.F.K4 Components of self-assessment for determining fitness for flight.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.F.R1 Aeromedical and physiological issues.
AA.I.F.R2 Hazardous attitudes.
AA.I.F.R3 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.I.F.R4 Confirmation and expectation bias.
Skills: The applicant exhibits the skill to:
AA.I.F.S1 Perform a self-assessment and determine fitness for flight.
Area of Operation I. Preflight Preparation › Task G. The Code of Federal Regulations (CFR) (ATP)
Task G. The Code of Federal Regulations (CFR) (ATP)
References: 14 CFR parts 61, 91, 111, 117, 121, 135; 49 CFR part 830; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25
Objective: To determine the applicant exhibits satisfactory knowledge associated with regulations applicable to the privileges and limitations of the ATP certificate and to flight operations that require an ATP certificate.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Note: See Appendix 1: Practical Test Roles, Responsibilities, and Outcomes and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.I.G.K1 14 CFR part 61, subparts A, B, and G.
AA.I.G.K2 14 CFR part 91 subparts A, B, C, F, G, H.
AA.I.G.K3 14 CFR part 117 (AMEL, AMES).
AA.I.G.K4 14 CFR part 121 subparts A, G, K, M, O, T, U, V (AMEL, AMES).
Area of Operation I. Preflight Preparation
AA.I.G.K5 14 CFR part 135 subparts A, B, C, D, E, F, G (ASEL, ASES).
AA.I.G.K6 49 CFR part 830.
AA.I.G.K7 14 CFR part 111 subparts A, D.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.G.R1 Lack of compliance with the applicable CFRs.
Skills: The applicant exhibits the skill to:
AA.I.G.S1 Apply the CFRs to the flight and operation.
Area of Operation I. Preflight Preparation › Task H.
Task H. Water and Seaplane Characteristics, Seaplane Bases, Maritime Rules, and Aids to Marine
Navigation (ASES, AMES)
References: AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; USCG Navigation Rules
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with water and seaplane characteristics, seaplane bases, maritime rules, and aids to marine navigation.
Knowledge: The applicant demonstrates understanding of:
AA.I.H.K1 The characteristics of a water surface as affected by features, such as:
AA.I.H.K1a a. Size and location
AA.I.H.K1b b. Protected and unprotected areas
AA.I.H.K1c c. Surface wind
AA.I.H.K1d d. Direction and strength of water current
AA.I.H.K1e e. Floating and partially submerged debris
AA.I.H.K1f f. Sandbars, islands, and shoals
AA.I.H.K1g g. Vessel traffic and wakes
AA.I.H.K1h h. Other characteristics specific to the area
AA.I.H.K1i i. Direction and height of waves
AA.I.H.K2 Float and hull construction, and its effect on seaplane performance.
AA.I.H.K3 Causes of porpoising and skipping, and the pilot action needed to prevent or correct these occurrences.
AA.I.H.K4 How to locate and identify seaplane bases on charts or in directories.
AA.I.H.K5 Operating restrictions at various bases.
AA.I.H.K6 Right-of-way, steering, and sailing rules pertinent to seaplane operation.
AA.I.H.K7 Marine navigation aids, such as buoys, beacons, lights, sound signals, and range markers.
AA.I.H.K8 Naval vessel protection zones.
AA.I.H.K9 No wake zones.
Area of Operation I. Preflight Preparation
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.I.H.R1 Local conditions.
AA.I.H.R2 Impact of marine traffic.
AA.I.H.R3 Right-of-way and sailing rules pertinent to seaplane operations.
AA.I.H.R4 Limited services and assistance available at seaplane bases.
Skills: The applicant exhibits the skill to:
AA.I.H.S1 Explain how float and hull construction can affect seaplane performance.
AA.I.H.S2 Describe how to correct for porpoising and skipping.
AA.I.H.S3 Locate seaplane bases on charts or in directories and identify any restrictions.
AA.I.H.S4 Identify marine navigation aids.
AA.I.H.S5 Describe what naval vessel protection zones and no wake zones are.
AA.I.H.S6 Assess the water surface characteristics for the proposed flight.
AA.I.H.S7 Perform correct right-of-way, steering, and sailing operations.
Area of Operation II. Preflight Procedures › Task A. Preflight Assessment
Area of Operation II. Preflight Procedures
Area of Operation II. Preflight Procedures
Task A. Preflight Assessment
References: 14 CFR parts 43, 61, 63, 71, 91, 97, 117, 119, 121, 135; AC 120-27, AC 120-60, AC 135-17, AIM, FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25, FAA-H-8083-28; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with preparation for safe flight.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.II.A.K1 Pilot self-assessment.
AA.II.A.K2 Determining that the aircraft to be used is appropriate, airworthy, and in a condition for safe flight by locating and explaining related documents such as:
AA.II.A.K2a a. Airworthiness and registration certificates
AA.II.A.K2b b. Operating limitations, handbooks, and manuals
AA.II.A.K2c c. Minimum Equipment List (MEL) and Configuration Deviation List (CDL), Kinds of Operations
Equipment Lists (KOEL)
AA.II.A.K2d d. Weight and balance data
AA.II.A.K2e e. Required inspections or tests and appropriate records and documentation (e.g., dispatch
release) as applicable to the proposed flight or operation
AA.II.A.K3 Preventive maintenance that can be performed by the pilot or other designated crewmember.
AA.II.A.K4 Aircraft preflight inspection, including:
AA.II.A.K4a a. Which items should be inspected
AA.II.A.K4b b. The reasons for checking each item
AA.II.A.K4c c. How to detect possible defects
AA.II.A.K4d d. The associated regulations
AA.II.A.K5 Environmental factors, including weather, terrain, route selection, and obstructions.
AA.II.A.K6 Requirements for current and appropriate navigation data.
AA.II.A.K7 Operations specifications, management specifications, or letters of authorization applying to a particular aircraft and operation, if applicable.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.II.A.R1 Human performance factors.
AA.II.A.R2 Inoperative equipment discovered prior to flight.
AA.II.A.R3 Environment (e.g., weather, airports, airspace, terrain, obstacles).
AA.II.A.R4 External pressures.
AA.II.A.R5 Aviation security concerns.
Area of Operation II. Preflight Procedures
Skills: The applicant exhibits the skill to:
AA.II.A.S1 Inspect the aircraft in accordance with an appropriate checklist demonstrating proper operation of applicable airplane systems. Coordinate checklist with crew, if appropriate.
AA.II.A.S2 Coordinate with ground crew and ensure adequate clearance prior to moving doors, hatches, flight control surfaces, etc.
AA.II.A.S3 Document any discrepancies found; take corrective action and acknowledge limitations imposed by MEL/CDL items, if applicable.
AA.II.A.S4 Determine if the aircraft is airworthy and in condition for safe flight.
AA.II.A.S5 Identify and comply with operations specifications as required.
AA.II.A.S6 Assess factors related to the environment (weather, airports, terrain, airspace).
AA.II.A.S7 Ensure the airplane and surfaces are free of ice, snow, and frost. If icing conditions are present, demonstrate satisfactory knowledge of deicing procedures.
Area of Operation II. Preflight Procedures › Task B. Powerplant Start
Task B. Powerplant Start
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with powerplant start procedures.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.II.B.K1 Normal and abnormal powerplant start procedures and limitations, including the use of an auxiliary power unit (APU) or external power source, if applicable.
AA.II.B.K2 Starting under various conditions.
AA.II.B.K3 Malfunctions during powerplant start, procedures to address the malfunction, and any associated limitations.
AA.II.B.K4 Coordinating and communicating with ground personnel for powerplant start, if applicable.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.II.B.R1 Malfunctions during powerplant start.
AA.II.B.R2 Propeller and turbine powerplant safety.
AA.II.B.R3 Managing situations where specific instructions or checklist items are not published.
AA.II.B.R4 Personnel, vehicles, vessels, foreign object debris, and other aircraft in the vicinity during powerplant start.
Skills: The applicant exhibits the skill to:
AA.II.B.S1 Ensure the ground safety procedures are followed during the before-start, start, and after-start phases.
AA.II.B.S2 Use appropriate ground crew personnel during the start procedures (if applicable).
Area of Operation II. Preflight Procedures
AA.II.B.S3 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to and after powerplant start.
AA.II.B.S4 Respond appropriately to an abnormal start or malfunction.
Area of Operation II. Preflight Procedures › Task C. Taxiing (ASEL, AMEL)
Task C. Taxiing (ASEL, AMEL)
References: 14 CFR parts 91, 121, 135; AC 91-73, AC 120-57, AC 120-74; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; NOTAMs; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with safe taxi operations.
Knowledge: The applicant demonstrates understanding of:
AA.II.C.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
AA.II.C.K2 Taxi instructions/clearances, including published taxi routes.
AA.II.C.K3 Airport markings, signs, and lights.
AA.II.C.K4 Appropriate aircraft lighting for day and night operations.
AA.II.C.K5 Push-back procedures, if applicable.
AA.II.C.K6 Appropriate flight deck activities prior to taxi, including route planning, identifying the location of Hot Spots, and coordinating with crew if, applicable.
AA.II.C.K7 Communications at towered and nontowered airports.
AA.II.C.K8 Entering or crossing runways.
AA.II.C.K9 Night taxi operations.
AA.II.C.K10 Low visibility taxi operations and techniques used to avoid disorientation.
AA.II.C.K11 Single-Engine taxi procedures for (AMEL).
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.II.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.II.C.R2 Confirmation or expectation bias as related to taxi instructions.
AA.II.C.R3 A taxi route or departure runway change.
AA.II.C.R4 Partial completion of checklist(s).
AA.II.C.R5 Low visibility taxi operations.
AA.II.C.R6 Runway incursion.
Skills: The applicant exhibits the skill to:
AA.II.C.S1 Receive/record taxi instructions, read back/acknowledge taxi clearances, and review taxi routes on the airport diagram.
AA.II.C.S2 Use an appropriate airport diagram or taxi chart, if published.
Area of Operation II. Preflight Procedures
AA.II.C.S3 Comply with air traffic control (ATC) clearances and instructions and observe all runway hold lines, Instrument Landing System (ILS) critical areas, beacons, and other airport/taxiway markings and lighting.
AA.II.C.S4 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to and during taxi, as appropriate.
AA.II.C.S5 Maintain situational awareness.
AA.II.C.S6 Maintain correct and positive airplane control, proper speed, appropriate use of wheel brakes and reverse thrust, and separation between other aircraft, vehicles, and persons to avoid an incursion/ incident/accident.
AA.II.C.S7 Demonstrate taxi during day and night operations. If either condition is not available, the applicant explains the differences between day and night taxi.
AA.II.C.S8 Demonstrate proper use of aircraft exterior lighting for day and night operations. If either condition is not available, the applicant explains the differences between exterior aircraft lighting used for day and night operations.
AA.II.C.S9 Explain the hazards of low visibility taxi operations.
Area of Operation II. Preflight Procedures › Task D. Taxiing and Sailing (ASES, AMES)
Task D. Taxiing and Sailing (ASES, AMES)
References: 14 CFR part 91, 121, 135; AC 91-73, AC 120-57, AC 120-74; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with safe taxi and sailing operations.
Knowledge: The applicant demonstrates understanding of:
AA.II.D.K1 Current airport/seaplane base aeronautical references and information resources, including Chart Supplements, airport diagram, and appropriate references.
AA.II.D.K2 Taxi instructions/clearances, if applicable.
AA.II.D.K3 Airport/seaplane base markings, signs, and lights.
AA.II.D.K4 Appropriate aircraft lighting for day and night operations.
AA.II.D.K5 Sailing elements and techniques and when sailing should be used.
AA.II.D.K6 Considerations for determining the most favorable sailing course.
AA.II.D.K7 Airport/seaplane base procedures, including:
AA.II.D.K7a a. Appropriate flight deck activities prior to taxi or sailing, including route planning, and
coordinating with crew, if applicable
AA.II.D.K7b b. Communications at towered and nontowered seaplane bases
AA.II.D.K7c c. Entering or crossing runways (land operation)
AA.II.D.K7d d. Night taxi and sailing operations
AA.II.D.K7e e. Low visibility taxi and sailing operations
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.II.D.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
Area of Operation II. Preflight Procedures
AA.II.D.R2 Porpoising and skipping.
AA.II.D.R3 Partial completion of checklist(s).
AA.II.D.R4 Low visibility taxi and sailing operations.
AA.II.D.R5 Other aircraft, vessels, and hazards.
AA.II.D.R6 Gear position in an amphibious airplane.
AA.II.D.R7 Confirmation or expectation bias as related to taxi instructions.
Skills: The applicant exhibits the skill to:
AA.II.D.S1 Receive/record taxi instructions, read back/acknowledge taxi clearances, and review taxi routes on the airport diagram.
AA.II.D.S2 Use an appropriate chart during taxi, if published.
AA.II.D.S3 Comply with ATC clearances, as appropriate, and seaplane base/airport/taxiway markings, signals and signs.
AA.II.D.S4 Depart the dock/mooring buoy or beach/ramp in a safe manner, considering wind, current, traffic, and hazards.
AA.II.D.S5 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to and during taxi or sailing, as appropriate.
AA.II.D.S6 Maintain situational awareness.
AA.II.D.S7 Maintain correct and positive airplane control, proper speed, appropriate use of reverse thrust, and separation between other aircraft, vehicles, vessels, and persons to avoid an incursion or right-of-way violation.
AA.II.D.S8 Position the flight controls, flaps, doors, water rudders, and power correctly for the existing conditions to follow the desired course while sailing and to prevent or correct for porpoising and skipping during step taxi.
AA.II.D.S9 Use the appropriate idle, plow, or step taxi technique.
AA.II.D.S10 Exhibit procedures for steering and maneuvering while maintaining proper situational awareness and desired orientation, path, and position.
AA.II.D.S11 Plan and follow the most favorable taxi or sailing course for current conditions.
AA.II.D.S12 Demonstrate taxi or sailing during day and night operations. If either condition is not available, the applicant explains the differences between day and night taxi or sailing.
AA.II.D.S13 Demonstrate proper use of aircraft exterior lighting for day and night operations. If either condition is not available, the applicant explains the differences between exterior aircraft lighting used for day and night operations.
AA.II.D.S14 Explain the hazards of low visibility taxi and sailing operations.
Area of Operation II. Preflight Procedures › Task E. Before Takeoff Checks
Task E. Before Takeoff Checks
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with before takeoff checks.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information
Area of Operation II. Preflight Procedures
related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.II.E.K1 Purpose of pre-takeoff checklist items, including:
AA.II.E.K1a a. Reasons for checking each item
AA.II.E.K1b b. Detecting malfunctions
AA.II.E.K1c c. Ensuring the aircraft is in safe operating condition
AA.II.E.K2 Deicing and anti-icing procedures, holdover times, and pre-takeoff contamination check.
AA.II.E.K3 Adverse weather considerations for performance on takeoff (e.g., snow, ice, gusting crosswinds, lowvisibility).
AA.II.E.K4 Items to be included in a before takeoff briefing.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.II.E.R1 Division of attention while conducting before takeoff checks.
AA.II.E.R2 An unexpected change in the runway to be used for departure.
AA.II.E.R3 Using performance data to set airspeeds and flight instruments for actual conditions and the departure runway.
AA.II.E.R4 Setting navigation and communication equipment for departure.
AA.II.E.R5 Configuring autopilot and flight director for departure.
AA.II.E.R6 Adverse weather conditions prior to takeoff (e.g., snow, ice, gusting crosswinds, low-visibility).
AA.II.E.R7 Potential powerplant failure during takeoff or other malfunction considering operational factors such as airplane characteristics, runway/takeoff path length, surface conditions, environmental conditions, and obstructions.
Skills: The applicant exhibits the skill to:
AA.II.E.S1 Determine the airplane’s takeoff performance for actual conditions and planned departure runway or waterway.
AA.II.E.S2 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.II.E.S3 Determine all systems checked are within an acceptable operating range and are safe for the proposed flight. During the checks, explain at the request of the evaluator, any system operating characteristic or limitation and any corrective action for a malfunction.
AA.II.E.S4 Determine airspeeds/V-speeds and set flight instruments appropriately, configure flight director, autopilot, and navigation and communication equipment for the current flight conditions and takeoff and departure clearances.
AA.II.E.S5 Conduct a briefing that includes procedures for emergency and abnormal situations (e.g., powerplant failure, windshear), which may be encountered during takeoff, and state the planned action if they were to occur.
AA.II.E.S6 Obtain and correctly interpret the takeoff and departure clearance.
Area of Operation III. Takeoffs and Landings › Task A. Normal Takeoff and Climb
Area of Operation III. Takeoffs and Landings
Area of Operation III. Takeoffs and Landings
Task A. Normal Takeoff and Climb
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management and skills associated with a normal takeoff and climb.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.A.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AA.III.A.K2 Appropriate V-speeds for takeoff and climb.
AA.III.A.K3 Appropriate aircraft configuration and power setting for takeoff and climb.
AA.III.A.K4 Runway markings and lighting.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.A.R1 Selection of a runway, or runway intersection, based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.A.R2 Wake turbulence.
AA.III.A.R3 Abnormal operations, including planning for:
AA.III.A.R3a a. Rejected takeoff
AA.III.A.R3b b. Potential engine failure in takeoff/climb phase of flight
AA.III.A.R4 Configuring or setting the aircraft (e.g., trim, flaps, autobrakes, etc.).
AA.III.A.R5 Collision hazards.
AA.III.A.R6 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.A.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.III.A.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.III.A.S2 Make radio calls as appropriate.
AA.III.A.S3 Verify assigned/correct runway (ASEL, AMEL) or takeoff path (ASES, AMES).
AA.III.A.S4 Verify the airplane is configured for takeoff.
AA.III.A.S5 Position the flight controls for the existing wind, if applicable.
AA.III.A.S6 Clear the area, taxi into takeoff position, and align the airplane on the runway centerline (ASEL, AMEL) or takeoff path (ASES, AMES).
Area of Operation III. Takeoffs and Landings
AA.III.A.S7 Retract the water rudders, as appropriate (ASES, AMES).
AA.III.A.S8 Establish and maintain the most efficient planing/lift-off attitude, and correct for porpoising or skipping (ASES, AMES).
AA.III.A.S9 Maintain centerline (ASEL, AMEL) and proper flight control inputs during the takeoff roll.
AA.III.A.S10 Confirm takeoff power and proper engine and flight instrument indications prior to rotation making callouts, as appropriate, for the airplane or per the operator’s procedures.
AA.III.A.S11 Avoid excessive water spray on the propeller(s) (ASES, AMES).
AA.III.A.S12 Rotate and lift off at the recommended airspeed.
AA.III.A.S13 Establish a power setting and a pitch attitude to maintain the desired climb airspeed/V-speed, ±5 knots for each climb segment.
AA.III.A.S14 Maintain desired heading ±5°.
AA.III.A.S15 Retract the landing gear and flaps in accordance with manufacturer or operator procedures and limitations, as appropriate.
AA.III.A.S16 Avoid wake turbulence, if applicable.
AA.III.A.S17 Follow noise abatement procedures, as practicable.
AA.III.A.S18 Complete appropriate after takeoff checklist(s) in a timely manner.
Area of Operation III. Takeoffs and Landings › Task B. Normal Approach and Landing
Task B. Normal Approach and Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; SAFO 17010, SAFO 19001
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with a normal approach and landing.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.B.K1 A stabilized approach, including energy management concepts.
AA.III.B.K2 Effects of atmospheric conditions, including wind, on approach and landing performance.
AA.III.B.K3 Wind correction techniques on approach and landing.
AA.III.B.K4 Runway markings and lighting.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.B.R1 Selection of a runway or approach path and touchdown area based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.B.R2 Wake turbulence.
AA.III.B.R3 Go-around/rejected landing.
Area of Operation III. Takeoffs and Landings
AA.III.B.R4 Land and hold short operations (LAHSO).
AA.III.B.R5 Collision hazards.
AA.III.B.R6 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.B.R7 Distractions, loss of situational awareness, incorrect airport surface approach and landing, or improper task management.
Skills: The applicant exhibits the skill to:
AA.III.B.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s).
AA.III.B.S2 Make radio calls as appropriate.
AA.III.B.S3 Maintain a ground track that ensures the desired traffic pattern flown takes into consideration obstructions and air traffic control (ATC) or evaluator instructions.
AA.III.B.S4 Ensure the airplane is aligned with the correct/assigned runway or landing surface.
AA.III.B.S5 Scan the runway or landing surface and adjoining area for traffic and obstructions.
AA.III.B.S6 Select a suitable touchdown point considering wind, landing surface, and obstructions.
AA.III.B.S7 Establish the recommended approach and landing configuration and airspeed, ±5 knots, and adjust pitch attitude and power as required to maintain a stabilized approach.
AA.III.B.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AA.III.B.S9 Make smooth, timely, and correct control application before, during, and after touchdown.
AA.III.B.S10 Touch down with the runway centerline between the main landing gear at the appropriate speed and pitch attitude at the runway aiming point markings -250/+500 feet, or where there are no runway markings 750 to 1,500 feet from the approach threshold of the runway (ASEL, AMEL).
AA.III.B.S11 During round out and touchdown contact the water at the proper pitch attitude within 200 feet beyond a specified point (ASES, AMES). In addition, for AMES, the touchdown is within the first one-third of the water landing area.
AA.III.B.S12 Decelerate to taxi speed (20 knots or less on dry pavement, 10 knots or less on contaminated pavement) to within the calculated landing distance plus 25% for the actual conditions with the runway centerline between the main landing gear (At least one landing) (ASEL, AMEL).
AA.III.B.S13 Use spoilers, prop reverse, thrust reverse, wheel brakes, and other drag/braking devices, as appropriate to safely slow the airplane. (At least one landing to a full stop).
AA.III.B.S14 Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
AA.III.B.S15 Use runway incursion avoidance procedures, if applicable.
Area of Operation III. Takeoffs and Landings › Task C. Glassy Water Takeoff and Climb (ASES, AMES)
Task C. Glassy Water Takeoff and Climb (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with glassy water takeoff and climb.
Note: If a glassy water condition does not exist, the applicant must be evaluated by simulating the Task.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information
Area of Operation III. Takeoffs and Landings
related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.C.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AA.III.C.K2 Appropriate power settings and V-speeds for takeoff and climb.
AA.III.C.K3 Appropriate airplane configuration.
AA.III.C.K4 Appropriate use of glassy water takeoff and climb technique.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.C.R1 Selection of the takeoff path based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.C.R2 Abnormal operations, including planning for:
AA.III.C.R2a a. Rejected takeoff
AA.III.C.R2b b. Potential engine failure in takeoff/climb phase of flight
AA.III.C.R3 Collision hazards.
AA.III.C.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.C.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.C.R6 Gear position in an amphibious airplane.
Skills: The applicant exhibits the skill to:
AA.III.C.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.III.C.S2 Make radio calls as appropriate.
AA.III.C.S3 Position the flight controls for the existing wind, if applicable.
AA.III.C.S4 Verify the airplane is configured for takeoff.
AA.III.C.S5 Clear the area; select appropriate takeoff path considering surface conditions and collision hazards.
AA.III.C.S6 Retract the water rudders, as appropriate.
AA.III.C.S7 Set and confirm takeoff power.
AA.III.C.S8 Avoid excessive water spray on the propeller(s).
AA.III.C.S9 Maintain directional control throughout takeoff and climb.
AA.III.C.S10 Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
AA.III.C.S11 Utilize appropriate techniques to lift seaplane from the water considering surface conditions.
AA.III.C.S12 Adjust power, as appropriate, and establish a pitch attitude to maintain the appropriate climb airspeed/ V-speed, ±5 knots for each climb segment.
Area of Operation III. Takeoffs and Landings
AA.III.C.S13 Retract flaps after a positive rate of climb has been verified or in accordance with manufacturer or operator procedures and limitations, as appropriate.
AA.III.C.S14 Follow noise abatement procedures, as practicable.
Area of Operation III. Takeoffs and Landings › Task D. Glassy Water Approach and Landing (ASES, AMES)
Task D. Glassy Water Approach and Landing (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with glassy water approach and landing.
Note: If a glassy water condition does not exist, the applicant must be evaluated by simulating the Task.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.D.K1 A stabilized approach, including energy management concepts.
AA.III.D.K2 Effects of atmospheric conditions, including wind, on approach and landing performance.
AA.III.D.K3 Wind correction techniques on approach and landing.
AA.III.D.K4 When and why glassy water techniques are used.
AA.III.D.K5 How a glassy water approach and landing is executed.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.D.R1 Selection of the approach path and touchdown area based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.D.R2 Go-around/rejected landing.
AA.III.D.R3 Collision hazards.
AA.III.D.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.D.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.D.R6 Gear position in an amphibious airplane.
Skills: The applicant exhibits the skill to:
AA.III.D.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s).
AA.III.D.S2 Make radio calls as appropriate.
AA.III.D.S3 Ensure that the landing gear and water rudders are retracted, if applicable.
AA.III.D.S4 Consider the landing surface, visual attitude references, water depth, and collision hazards and select the proper approach and landing path.
AA.III.D.S5 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AA.III.D.S6 Maintain a stabilized approach and recommended airspeed, ±5 knots.
Area of Operation III. Takeoffs and Landings
AA.III.D.S7 Make smooth, timely, and correct power and control adjustments to maintain proper pitch attitude and rate of descent to touchdown.
AA.III.D.S8 Maintain directional control throughout the approach and landing.
AA.III.D.S9 Contact the water in a proper pitch attitude, and slow to idle taxi speed.
Area of Operation III. Takeoffs and Landings › Task E. Rough Water Takeoff and Climb (ASES, AMES)
Task E. Rough Water Takeoff and Climb (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with rough water takeoff and climb.
Note: If a rough water condition does not exist, the applicant must be evaluated by simulating the Task.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.E.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AA.III.E.K2 Appropriate power settings and V-speeds for takeoff and climb.
AA.III.E.K3 Appropriate airplane configuration.
AA.III.E.K4 Appropriate use of rough water takeoff and climb technique.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.E.R1 Selection of the takeoff path based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.E.R2 Abnormal operations, including planning for:
AA.III.E.R2a a. Rejected takeoff
AA.III.E.R2b b. Potential engine failure in takeoff/climb phase of flight
AA.III.E.R3 Collision hazards.
AA.III.E.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.E.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.E.R6 Gear position in an amphibious airplane.
Skills: The applicant exhibits the skill to:
AA.III.E.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.III.E.S2 Make radio calls as appropriate.
AA.III.E.S3 Position the flight controls for the existing wind, if applicable.
AA.III.E.S4 Verify the airplane is configured for takeoff.
AA.III.E.S5 Clear the area; select appropriate takeoff path considering surface conditions and collision hazards.
Area of Operation III. Takeoffs and Landings
AA.III.E.S6 Retract the water rudders, as appropriate.
AA.III.E.S7 Set and confirm takeoff power.
AA.III.E.S8 Avoid excessive water spray on the propeller(s).
AA.III.E.S9 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AA.III.E.S10 Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
AA.III.E.S11 Establish proper attitude and airspeed, lift off at minimum airspeed and accelerate to appropriate climb airspeed/V-speed, ±5 knots before leaving ground effect.
AA.III.E.S12 Retract the flaps after a positive rate of climb is established and a safe altitude has been achieved.
AA.III.E.S13 Maintain takeoff power to a safe maneuvering altitude then set climb power.
AA.III.E.S14 Follow noise abatement procedures, as practicable.
Area of Operation III. Takeoffs and Landings › Task F. Rough Water Approach and Landing (ASES, AMES)
Task F. Rough Water Approach and Landing (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with rough water approach and landing.
Note: If a rough water condition does not exist, the applicant must be evaluated by simulating the Task.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.F.K1 A stabilized approach, including energy management concepts.
AA.III.F.K2 Effects of atmospheric conditions, including wind, on approach and landing performance.
AA.III.F.K3 Wind correction techniques on approach and landing.
AA.III.F.K4 When and why rough water techniques are used.
AA.III.F.K5 How to perform a proper rough water approach and landing.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.F.R1 Selection of the approach path and touchdown area based on airplane limitations, available distance, surface conditions, and wind.
AA.III.F.R2 Go-around/rejected landing.
AA.III.F.R3 Collision hazards.
AA.III.F.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.F.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.F.R6 Gear position in an amphibious airplane.
Skills: The applicant exhibits the skill to:
Area of Operation III. Takeoffs and Landings
AA.III.F.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s).
AA.III.F.S2 Make radio calls as appropriate.
AA.III.F.S3 Ensure that the landing gear and water rudders are retracted, if applicable.
AA.III.F.S4 Consider the landing surface, visual attitude references, water depth, and collision hazards and select the proper approach and landing path.
AA.III.F.S5 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AA.III.F.S6 Maintain a stabilized approach and recommended airspeed with gust factor applied, ±5 knots.
AA.III.F.S7 Make smooth, timely, and correct power and control adjustments to maintain proper attitude and rate of descent to touchdown.
AA.III.F.S8 Contact the water at the correct pitch attitude and touchdown speed.
AA.III.F.S9 Make smooth, timely, and correct power and control application during the landing while remaining alert for a go-around should conditions be too rough.
AA.III.F.S10 Maintain positive after-landing control.
Area of Operation III. Takeoffs and Landings › Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES)
Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with confined area takeoff and maximum performance climb.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.G.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AA.III.G.K2 Appropriate power settings and V-speeds for takeoff and climb.
AA.III.G.K3 Appropriate airplane configuration.
AA.III.G.K4 Effects of water surface.
AA.III.G.K5 Available techniques for confined-area takeoff and climb.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.G.R1 Selection of the takeoff path based on airplane limitations, available distance, surface conditions, and wind.
AA.III.G.R2 Abnormal operations, including planning for:
AA.III.G.R2a a. Rejected takeoff
AA.III.G.R2b b. Potential engine failure in takeoff/climb phase of flight
AA.III.G.R3 Collision hazards.
AA.III.G.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
Area of Operation III. Takeoffs and Landings
AA.III.G.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.G.R6 Gear position in an amphibious airplane.
Skills: The applicant exhibits the skill to:
AA.III.G.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.III.G.S2 Make radio calls as appropriate.
AA.III.G.S3 Position the flight controls for the existing wind, if applicable.
AA.III.G.S4 Verify the airplane is configured for takeoff.
AA.III.G.S5 Clear the area; select appropriate takeoff path considering surface conditions and collision hazards.
AA.III.G.S6 Retract the water rudders, as appropriate.
AA.III.G.S7 Set and confirm takeoff power.
AA.III.G.S8 Avoid excessive water spray on the propeller(s).
AA.III.G.S9 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AA.III.G.S10 Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
AA.III.G.S11 Rotate and lift off at the appropriate airspeed, and accelerate to the recommended obstacle clearance airspeed or VX using appropriate bank angles to maintain terrain clearance, as needed.
AA.III.G.S12 Climb at the recommended airspeed or in its absence at best angle-of-climb speed (VX), +5/-0 knots until the obstacle is cleared, or until the airplane is 50 feet above the surface. In multiengine airplanes with VX values within 5 knots of minimum control speed (VMC), the use of best rate of climb speed (VY) or the manufacturer's recommendation is acceptable.
AA.III.G.S13 After clearing all obstacles, accelerate to VY ±5 knots.
AA.III.G.S14 Retract flaps and adjust power as needed to maintain VY or appropriate climb airspeed, ±5 knots to a safe maneuvering altitude.
AA.III.G.S15 Follow noise abatement procedures, as practicable.
Area of Operation III. Takeoffs and Landings › Task H. Confined Area Approach and Landing (ASES, AMES)
Task H. Confined Area Approach and Landing (ASES, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with confined area approach and landing.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.H.K1 A stabilized approach, including energy management concepts.
AA.III.H.K2 Effects of atmospheric conditions, including wind, on approach and landing performance.
AA.III.H.K3 Available techniques for confined-area approach and landing.
Area of Operation III. Takeoffs and Landings
AA.III.H.K4 Wind correction techniques on approach and landing.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.H.R1 Selection of the approach path and touchdown area based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.H.R2 Go-around/rejected landing.
AA.III.H.R3 Collision hazards.
AA.III.H.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.H.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.H.R6 Gear position in an amphibious airplane.
AA.III.H.R7 Landing in an area or in conditions where a takeoff/climb may not be possible.
Skills: The applicant exhibits the skill to:
AA.III.H.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s).
AA.III.H.S2 Make radio calls as appropriate.
AA.III.H.S3 Ensure that the landing gear and water rudders are retracted, if applicable.
AA.III.H.S4 Consider the landing surface, visual attitude references, water depth, and collision hazards and select the proper approach and landing path.
AA.III.H.S5 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AA.III.H.S6 Maintain a stabilized approach and recommended airspeed with gust factor applied, ±5 knots.
AA.III.H.S7 Make smooth, timely, and correct power and control adjustments to maintain proper attitude and rate of descent to touchdown.
AA.III.H.S8 Touch down smoothly at the recommended airspeed and pitch attitude, beyond and within 100 feet of a specified point/area.
AA.III.H.S9 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
Area of Operation III. Takeoffs and Landings › Task I. Rejected Takeoff
Task I. Rejected Takeoff
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with a rejected takeoff.
Note: See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.I.K1 Conditions and situations that could warrant a rejected takeoff (e.g., takeoff warning systems, powerplant failure, other systems warning/failure).
AA.III.I.K2 Safety considerations following a rejected takeoff.
Area of Operation III. Takeoffs and Landings
AA.III.I.K3 The procedure for accomplishing a rejected takeoff.
AA.III.I.K4 Accelerate/stop distance.
AA.III.I.K5 Relevant V-speeds for a rejected takeoff.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.I.R1 Selection of the takeoff path based on aircraft limitations, available distance, surface conditions, and wind.
AA.III.I.R2 A powerplant failure or other malfunction during takeoff.
AA.III.I.R3 Directional control following a rejected takeoff.
AA.III.I.R4 A rejected takeoff with inadequate stopping distance.
AA.III.I.R5 High-speed rejected takeoff.
AA.III.I.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.III.I.S1 Reject the takeoff if the powerplant failure occurs prior to becoming airborne (ASEL, ASES).
AA.III.I.S2 Reject the takeoff if the powerplant failure occurs at a point during the takeoff where the rejected takeoff procedure can be initiated and the airplane can be safely stopped on the remaining runway/ waterway (AMEL, AMES).
AA.III.I.S3 Promptly reduce the power and maintain positive aircraft control using drag and braking devices, as appropriate, to come to a stop.
AA.III.I.S4 Coordinate with crew, if applicable, and complete the appropriate procedures, checklist(s), and radio calls following a rejected takeoff in a timely manner.
Area of Operation III. Takeoffs and Landings › Task J. Go-Around/Rejected Landing
Task J. Go-Around/Rejected Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; FSB Report (type specific); POH/ AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with a go-around/rejected landing.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.III.J.K1 A stabilized approach, including energy management concepts.
AA.III.J.K2 Effects of atmospheric conditions, including wind and density altitude, on a go-around or rejected landing.
AA.III.J.K3 Wind correction techniques on takeoff/departure and approach/landing.
AA.III.J.K4 Situations and considerations on approach that could require a go-around/rejected landing, including the inability to comply with a LAHSO clearance.
AA.III.J.K5 Go-around/rejected landing procedures, the importance of a timely decision, and appropriate airspeed/ V-speeds for the maneuver.
Area of Operation III. Takeoffs and Landings
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.III.J.R1 Delayed recognition of the need for a go-around/rejected landing.
AA.III.J.R2 Delayed performance of a go-around at low altitude.
AA.III.J.R3 Power application.
AA.III.J.R4 Configuring the airplane.
AA.III.J.R5 Collision hazards.
AA.III.J.R6 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.III.J.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.III.J.R8 Managing a go-around/rejected landing after accepting a LAHSO clearance.
Skills: The applicant exhibits the skill to:
AA.III.J.S1 Make a timely decision to go-around/reject the landing.
AA.III.J.S2 Apply the appropriate power setting for the flight condition and establish a pitch attitude necessary to obtain the desired performance.
AA.III.J.S3 Establish a positive rate of climb and the appropriate airspeed/V-speed, ±5 knots.
AA.III.J.S4 Configure and trim the airplane, when appropriate.
AA.III.J.S5 Make radio calls as appropriate.
AA.III.J.S6 Maintain the ground track, heading, or course appropriate for the conditions, or as specified by ATC or the evaluator.
AA.III.J.S7 Complete the appropriate procedures and checklist(s) in a timely manner.
Area of Operation IV. In-flight Maneuvers › Task A. Steep Turns
Area of Operation IV. In-flight Maneuvers
Area of Operation IV. In-flight Maneuvers
Task A. Steep Turns
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with steep turns.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.IV.A.K1 Energy management concepts.
AA.IV.A.K2 Aerodynamics associated with steep turns, including:
AA.IV.A.K2a a. Maintaining coordinated flight
AA.IV.A.K2b b. Overbanking tendencies
AA.IV.A.K2c c. Maneuvering speed, including the impact of weight changes
AA.IV.A.K2d d. Load factor and accelerated stalls
AA.IV.A.K2e e. Rate and radius of turn
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.IV.A.R1 Spatial disorientation when conducting a steep turn while flying by reference to instruments.
AA.IV.A.R2 Collision hazards including aircraft and terrain.
AA.IV.A.R3 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.IV.A.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.IV.A.R5 Uncoordinated flight.
Skills: The applicant exhibits the skill to:
AA.IV.A.S1 Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
AA.IV.A.S2 Establish the manufacturer's recommended airspeed; or if one is not available, an airspeed not to exceed maneuvering speed (VA).
AA.IV.A.S3 Establish at least a 45° bank solely by reference to instruments and make a coordinated steep turn of at least 180°, as specified by the evaluator.
AA.IV.A.S4 Perform the Task in the opposite direction, as specified by evaluator.
AA.IV.A.S5 Make smooth pitch, bank, and power adjustments as needed.
AA.IV.A.S6 Maintain the entry altitude ±100 feet, airspeed ±10 knots, bank ±5°, and roll out on the specified heading, ±10°.
AA.IV.A.S7 Avoid any indication of an impending stall, abnormal flight attitude, or exceeding any structural or operating limitation during any part of the Task.
Area of Operation IV. In-flight Maneuvers
Area of Operation IV. In-flight Maneuvers › Task B. Recovery from Unusual Flight Attitudes
Task B. Recovery from Unusual Flight Attitudes
References: AC 120-111; FAA-H-8083-2, FAA-H-8083-15, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with recovering from unusual flight attitudes solely by reference to instruments.
Knowledge: The applicant demonstrates understanding of:
AA.IV.B.K1 Procedures for recovery from unusual flight attitudes.
AA.IV.B.K2 Unusual flight attitude causal factors, including physiological factors, system and equipment failures, and environmental factors.
AA.IV.B.K3 The operating envelope and structural limitations for the aircraft.
AA.IV.B.K4 Effects of engine location, wing design, and other specific design characteristics that could affect aircraft control during the recovery.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.IV.B.R1 Situations that could lead to loss of control in-flight (LOC-I) or unusual attitudes in-flight (e.g., stress, task saturation, inadequate instrument scan distractions, and spatial disorientation).
AA.IV.B.R2 [Archived]
AA.IV.B.R3 Operating envelope considerations.
AA.IV.B.R4 Interpreting flight instruments.
AA.IV.B.R5 Assessment of the unusual attitude.
AA.IV.B.R6 Control input errors, inducing undesired aircraft attitudes.
AA.IV.B.R7 Control application solely by reference to instruments.
AA.IV.B.R8 Collision hazards.
AA.IV.B.R9 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.IV.B.S1 Use proper instrument cross-check and interpretation to identify an unusual attitude (including both nose-high and nose-low) in flight, and apply the appropriate flight control, power input, and aircraft configuration in the correct sequence, to return to a stabilized level flight attitude.
Area of Operation IV. In-flight Maneuvers › Task C. Specific Flight Characteristics
Task C. Specific Flight Characteristics
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with flight and performance characteristics unique to a specific aircraft type.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.IV.C.K1 All specific flight and performance characteristics associated with the aircraft.
Area of Operation IV. In-flight Maneuvers
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.IV.C.R1 Specific flight and performance characteristics, their effects, and applicable procedures.
AA.IV.C.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.IV.C.S1 Use proper techniques, checklists, and procedures to enter into, operate within, and recover from specific flight situations, as applicable.
Area of Operation V. Stall Prevention › Task A. Partial Flap Configuration Stall Prevention
Area of Operation V. Stall Prevention
Area of Operation V. Stall Prevention
Task A. Partial Flap Configuration Stall Prevention
References: AC 61-67, AC 120-109; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with stalls in a partial flap configuration.
Note: See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.V.A.K1 Aerodynamics associated with stalls in a partial flap configuration, including the relationship between angle of attack, airspeed, load factor, power setting, aircraft weight and balance, aircraft attitude, and sideslip effects.
AA.V.A.K2 Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or feel.
AA.V.A.K3 Factors and situations that can lead to a stall during takeoff or while on approach and actions that can be taken to prevent it.
AA.V.A.K4 Effects of autoflight, flight envelope protection in normal and degraded modes, and unexpected disconnects of the autopilot or autothrottle/autothrust, if applicable to the aircraft used for the evaluation.
AA.V.A.K5 Fundamentals of stall recovery.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.V.A.R1 Factors and situations that could lead to an inadvertent stall, spin, and loss of control during takeoff or while on approach.
AA.V.A.R2 Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, stick shaker, etc.).
AA.V.A.R3 Stall warning awareness.
AA.V.A.R4 Stall recovery procedure.
AA.V.A.R5 Secondary stalls, accelerated stalls, elevator trim stalls, and cross-control stalls.
AA.V.A.R6 Effect of environmental elements on aircraft performance while in a partial flap configuration as it relates to stalls (e.g., turbulence, microbursts, and high-density altitude).
AA.V.A.R7 Collision hazards including aircraft and terrain.
AA.V.A.R8 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.V.A.S1 Clear the area and select an entry altitude that allows the recovery to be completed no lower than 3,000 feet above ground level (AGL) (non-transport category airplanes) or 5,000 feet AGL (transport category airplanes).
AA.V.A.S2 [Archived]
Area of Operation V. Stall Prevention
AA.V.A.S3 Establish the takeoff or approach configuration (partial flap), as specified by the evaluator, and maintain coordinated flight in simulated or actual instrument conditions throughout the maneuver.
AA.V.A.S4 Either manually or with the autopilot engaged, smoothly adjust pitch attitude, bank angle (15°-30°), and power setting in accordance with evaluator’s instructions to an impending stall.
AA.V.A.S5 Acknowledge the cue(s) and promptly recover at the first indication of an impending stall (e.g., buffet, stall horn, stick shaker, etc.).
AA.V.A.S6 Execute a stall recovery in accordance with procedures set forth in the Pilot's Operating Handbook (POH)/Flight Manual (FM).
AA.V.A.S7 Retract the flaps or other lift/drag devices to the recommended setting, if applicable; retract the landing gear after a positive rate of climb is established, if applicable; and return to the desired flight path as specified by the evaluator.
Area of Operation V. Stall Prevention › Task B. Clean Configuration Stall Prevention
Task B. Clean Configuration Stall Prevention
References: AC 61-67, AC 120-109; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with stalls in a clean configuration.
Note: See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.V.B.K1 Aerodynamics associated with stalls in a clean configuration, including the relationship between angle of attack, airspeed, load factor, power setting, aircraft weight and balance, and aircraft attitude.
AA.V.B.K2 Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or feel.
AA.V.B.K3 Factors and situations that can lead to a stall during cruise flight and actions that can be taken to prevent it.
AA.V.B.K4 Effects of autoflight, flight envelope protection in normal and degraded modes, and unexpected disconnects of the autopilot or autothrottle/autothrust, if applicable to the aircraft used for the evaluation.
AA.V.B.K5 Fundamentals of stall recovery.
AA.V.B.K6 Effects of altitude on performance (e.g., thrust available) and flight control effectiveness during a recovery.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.V.B.R1 Factors and situations that could lead to an inadvertent stall, spin, and loss of control during cruise flight.
AA.V.B.R2 Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, stick shaker, etc.).
AA.V.B.R3 Stall warning awareness.
AA.V.B.R4 Stall recovery procedure.
AA.V.B.R5 Secondary stalls, accelerated stalls, elevator trim stalls, and cross-control stalls.
Area of Operation V. Stall Prevention
AA.V.B.R6 Effect of environmental elements on aircraft performance while in cruise flight as it relates to stalls (e.g., turbulence, microbursts, and high-density altitude).
AA.V.B.R7 Collision hazards including aircraft and terrain.
AA.V.B.R8 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.V.B.S1 Clear the area and select an entry altitude that allows the recovery to be completed no lower than 3,000 feet above ground level (AGL) (non-transport category airplanes) or 5,000 feet AGL (transport category airplanes).
AA.V.B.S2 [Archived]
AA.V.B.S3 While in cruise flight, maintain coordinated flight in simulated or actual instrument conditions throughout the maneuver.
AA.V.B.S4 Either manually or with the autopilot engaged, smoothly adjust pitch attitude, bank angle (15°-30°), and power setting in accordance with evaluator’s instructions to an impending stall.
AA.V.B.S5 Acknowledge the cue(s) and promptly recover at the first indication of an impending stall (e.g., buffet, stall horn, stick shaker, etc.).
AA.V.B.S6 Execute a stall recovery in accordance with procedures set forth in the Pilot's Operating Handbook (POH)/Flight Manual (FM).
AA.V.B.S7 Return to the desired flight path as specified by the evaluator.
Area of Operation V. Stall Prevention › Task C. Landing Configuration Stall Prevention
Task C. Landing Configuration Stall Prevention
References: AC 61-67, AC 120-109; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; FSB Report (type specific); POH/AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with stalls in the landing configuration
Note: See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.V.C.K1 Aerodynamics associated with stalls in the landing configuration, including the relationship between angle of attack, airspeed, load factor, power setting, aircraft weight and balance, aircraft attitude, and sideslip effects.
AA.V.C.K2 Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or feel.
AA.V.C.K3 Factors and situations that can lead to a stall when configured for landing and actions that can be taken to prevent it.
AA.V.C.K4 Effects of autoflight, flight envelope protection in normal and degraded modes, and unexpected disconnects of the autopilot or autothrottle/autothrust, if applicable to the aircraft used for the evaluation.
AA.V.C.K5 Fundamentals of stall recovery.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
Area of Operation V. Stall Prevention
AA.V.C.R1 Factors and situations that could lead to an inadvertent stall, spin, and loss of control during landing.
AA.V.C.R2 Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, stick shaker, etc.).
AA.V.C.R3 Stall warning awareness.
AA.V.C.R4 Stall recovery procedure.
AA.V.C.R5 Secondary stalls, accelerated stalls, elevator trim stalls, and cross-control stalls.
AA.V.C.R6 Effect of environmental elements on aircraft performance while landing as it relates to stalls (e.g., turbulence, icing, microbursts, and high-density altitude).
AA.V.C.R7 Stalls at a low altitude.
AA.V.C.R8 Collision hazards, including aircraft and terrain.
AA.V.C.R9 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.V.C.S1 Clear the area and select an entry altitude that allows the recovery to be completed no lower than 3,000 feet above ground level (AGL) (non-transport category airplanes) or 5,000 feet AGL (transport category airplanes).
AA.V.C.S2 [Archived]
AA.V.C.S3 Establish the landing configuration (i.e., lift/drag devices set and landing gear extended) and maintain coordinated flight in simulated or actual instrument conditions throughout the maneuver.
AA.V.C.S4 Either manually or with the autopilot engaged, smoothly adjust pitch attitude, bank angle (15°-30°), and power setting in accordance with evaluator’s instructions to an impending stall.
AA.V.C.S5 Acknowledge the cue(s) and promptly recover at the first indication of an impending stall (e.g., buffet, stall horn, stick shaker, etc.).
AA.V.C.S6 Execute a stall recovery in accordance with procedures set forth in the Pilot's Operating Handbook (POH)/Flight Manual (FM).
AA.V.C.S7 Retract the flaps or other lift/drag devices to the recommended setting, if applicable; retract the landing gear after a positive rate of climb is established, if applicable; and return to the desired flight path as specified by the evaluator.
Area of Operation VI. Instrument Procedures › Task A. Instrument Takeoff
Area of Operation VI. Instrument Procedures
Area of Operation VI. Instrument Procedures
Task A. Instrument Takeoff
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with an instrument takeoff.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.A.K1 Operational factors that could affect an instrument takeoff (e.g., runway length, runway lighting, surface conditions, wind, wake turbulence, icing conditions, obstructions, available instrument approaches or alternate airports available) in the event of an emergency after takeoff.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.A.R1 Selection of a runway based on aircraft performance and limitations, available distance, surface conditions, lighting, and wind.
AA.VI.A.R2 Wake turbulence.
AA.VI.A.R3 Abnormal operations, including planning for:
AA.VI.A.R3a a. Rejected takeoff
AA.VI.A.R3b b. Potential engine failure in takeoff/climb phase of flight with the ceiling or visibility below the
minimums for an instrument approach at departure airport
AA.VI.A.R4 Collision hazards.
AA.VI.A.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.VI.A.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant exhibits the skill to:
AA.VI.A.S1 Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
AA.VI.A.S2 Properly set the applicable avionics and flight instruments prior to initiating the takeoff.
AA.VI.A.S3 Make radio calls as appropriate.
AA.VI.A.S4 Verify assigned/correct runway (ASEL, AMEL) or takeoff path (ASES, AMES).
AA.VI.A.S5 Position the flight controls for the existing wind, if applicable.
AA.VI.A.S6 Clear the area, taxi into takeoff position, and align the airplane on the runway centerline (ASEL, AMEL) or takeoff path (ASES, AMES).
AA.VI.A.S7 Perform an instrument takeoff with instrument meteorological conditions (IMC) simulated at or before reaching an altitude of 100 feet above ground level (AGL). If accomplished in a full flight simulator, visibility should be no greater than ¼ mile, or as specified by applicable operations specifications, whichever is lower.
AA.VI.A.S8 Maintain centerline (ASEL, AMEL) and proper flight control inputs during the takeoff roll.
Area of Operation VI. Instrument Procedures
AA.VI.A.S9 Confirm takeoff power and proper engine and flight instrument indications prior to rotation making callouts, as appropriate, for the airplane or per the operator’s procedures.
AA.VI.A.S10 Rotate and lift off at the recommended airspeed, establish the desired pitch attitude, and accelerate to the desired airspeed/V-speed.
AA.VI.A.S11 Transition smoothly from visual meteorological conditions (VM*C) to actual or simulated instrument meteorological conditions (IMC).
AA.VI.A.S12 Maintain desired heading ±5° and desired airspeeds ±5 knots.
AA.VI.A.S13 Comply with air traffic control (ATC) clearances and instructions issued by ATC or the evaluator, as appropriate.
AA.VI.A.S14 Complete appropriate after takeoff checklist(s) in a timely manner.
Area of Operation VI. Instrument Procedures › Task B. Departure Procedures
Task B. Departure Procedures
References: 14 CFR part 91; AC 90-100; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; POH/AFM; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with instrument departure procedures (DPs).
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.B.K1 Takeoff minimums; (Obstacle) Departure Procedure (ODP), including Visual Climb over the Airport (VCOA) and Diverse Vector Area (Radar Vectors); Standard Instrument Departure (SID), including Area Navigation (RNAV) departure; required climb gradients; U.S. Terminal Procedures Publications; and En Route Charts.
AA.VI.B.K2 Use of a Flight Management System (FMS) or Global Positioning System (GPS) to follow a DP.
AA.VI.B.K3 Pilot/controller responsibilities, communication procedures, and ATC services available to pilots.
AA.VI.B.K4 Two-way radio communication failure procedures after takeoff.
AA.VI.B.K5 Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appropriate use of navigation data, signal integrity).
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.B.R1 Following published procedures and required climb gradients or ATC Instructions.
AA.VI.B.R2 Limitations of air traffic avoidance equipment and use of see and avoid techniques.
AA.VI.B.R3 Automation management.
Skills: The applicant exhibits the skill to:
AA.VI.B.S1 Select the appropriate instrument departure procedure. Then select, identify (as necessary), and use the appropriate communication and navigation facilities associated with the procedure.
AA.VI.B.S2 Program the FMS prior to departure and set avionics, including flight director and autopilot controls, as appropriate, for the departure, if applicable.
Area of Operation VI. Instrument Procedures
AA.VI.B.S3 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
AA.VI.B.S4 Use current and appropriate navigation publications or databases for the proposed flight.
AA.VI.B.S5 Establish two-way communications with the proper controlling agency, use proper phraseology, comply, in a timely manner, with all ATC instructions and airspace restrictions, and exhibit adequate knowledge of communication failure procedures.
AA.VI.B.S6 Intercept all courses, radials, and bearings appropriate to the procedure, route, clearance, or as directed by the evaluator in a timely manner.
AA.VI.B.S7 Comply with all applicable charted procedures.
AA.VI.B.S8 Maintain the appropriate airspeed ±10 knots, headings ±10°, and altitude ±100 feet, and accurately track a course, radial, or bearing.
AA.VI.B.S9 Conduct the departure phase to a point where, in the opinion of the evaluator, the transition to the en route environment is complete.
Area of Operation VI. Instrument Procedures › Task C. Arrival Procedures
Task C. Arrival Procedures
References: 14 CFR part 91; AC 90-100; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; IFR Enroute Charts; POH/AFM; STARs; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with Instrument Flight Rules (IFR) arrival procedures.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.C.K1 Standard Terminal Arrival (STAR) charts, U.S. Terminal Procedures Publications, and IFR En Route High and Low Altitude Charts.
AA.VI.C.K2 Use of a Flight Management System (FMS) or GPS to follow a STAR.
AA.VI.C.K3 Pilot/controller responsibilities, communication procedures, and ATC services available to pilots.
AA.VI.C.K4 Two-way radio communication failure procedures during an arrival.
AA.VI.C.K5 Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appropriate use of navigation data, signal integrity).
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.C.R1 ATC communications and compliance with published procedures.
AA.VI.C.R2 Limitations of traffic avoidance equipment.
AA.VI.C.R3 Responsibility to use "see and avoid" techniques when possible.
AA.VI.C.R4 Automation management.
AA.VI.C.R5 ATC instructions that modify an arrival or discontinue/resume the aircraft's lateral or vertical navigation on an arrival.
Skills: The applicant exhibits the skill to:
Area of Operation VI. Instrument Procedures
AA.VI.C.S1 In actual or simulated instrument conditions, select, identify (as necessary) and use the appropriate communication and navigation facilities associated with the arrival.
AA.VI.C.S2 Set FMS and avionics, including flight director and autopilot controls for the arrival, if applicable.
AA.VI.C.S3 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
AA.VI.C.S4 Use current and appropriate navigation publications or databases for the proposed flight.
AA.VI.C.S5 Establish two-way communications with the proper controlling agency, use proper phraseology and comply, in a timely manner, with all ATC instructions and airspace restrictions as well as exhibit adequate knowledge of communication failure procedures.
AA.VI.C.S6 Intercept all courses, radials, and bearings appropriate to the procedure, route, clearance, or as directed by the evaluator in a timely manner.
AA.VI.C.S7 Comply with all applicable charted procedures.
AA.VI.C.S8 Adhere to airspeed restrictions required by regulation, procedure, aircraft limitation, ATC, or the evaluator.
AA.VI.C.S9 Establish rates of descent consistent with the route segment, airplane operating characteristics and safety.
AA.VI.C.S10 Maintain the appropriate airspeed/V-speed ±10 knots, but not less than reference landing approach speed (VREF) if applicable, heading ±10°, altitude ±100 feet, and accurately track radials, courses, and bearings.
Area of Operation VI. Instrument Procedures › Task D. Non-precision Approaches
Task D. Non-precision Approaches
References: 14 CFR part 91; AC 120-108; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing non-precision approach procedures.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.D.K1 Procedures and limitations associated with a non-precision approach, including the differences between Localizer Performance (LP) and Lateral Navigation (LNAV) approach guidance.
AA.VI.D.K2 Navigation system displays and annunciations, modes of operation, and Required Navigation Performance (RNP) lateral accuracy values associated with an RNAV (GPS) approach.
AA.VI.D.K3 Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appropriate use of navigation data, signal integrity).
AA.VI.D.K4 A stabilized approach, including energy management concepts.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.D.R1 Deviating from the assigned approach procedure.
AA.VI.D.R2 Selecting a navigation frequency.
AA.VI.D.R3 Management of automated navigation and autoflight systems.
Area of Operation VI. Instrument Procedures
AA.VI.D.R4 Aircraft configuration during an approach and missed approach.
AA.VI.D.R5 An unstable approach, including excessive descent rates.
AA.VI.D.R6 Deteriorating weather conditions on approach.
AA.VI.D.R7 Operating below the minimum descent altitude (MDA) without proper visual references.
Skills: The applicant exhibits the skill to:
AA.VI.D.S1 Accomplish the non-precision instrument approaches selected by the evaluator.
AA.VI.D.S2 Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper communication phraseology.
AA.VI.D.S3 Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
AA.VI.D.S4 Comply with all clearances issued by ATC or the evaluator.
AA.VI.D.S5 Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
AA.VI.D.S6 Advise ATC or the evaluator if unable to comply with a clearance.
AA.VI.D.S7 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
AA.VI.D.S8 Establish the appropriate airplane configuration and airspeed considering meteorological and operating conditions.
AA.VI.D.S9 Maintain altitude ±100 feet, selected heading ±5°, airspeed ±10 knots, and accurately track radials, courses, and bearings, prior to beginning the final approach segment.
AA.VI.D.S10 Adjust the published MDA/Derived Decision Altitude (DDA) and visibility criteria for the aircraft approach category, as appropriate, for factors that include Notices to Air Missions (NOTAMs), inoperative aircraft or navigation equipment, or inoperative visual aids associated with the landing environment, etc.
AA.VI.D.S11 Establish a stabilized descent to the appropriate altitude.
AA.VI.D.S12 For the final approach segment, maintain no more than ¼ scale course deviation indicator (CDI) deflection, airspeed ±5 knots of selected value, and altitude above MDA +50/-0 feet [to the visual descent point (VDP) or missed approach point (MAP)].
AA.VI.D.S13 Execute the missed approach procedure if the required visual references are not distinctly visible and identifiable at the appropriate point or altitude for the approach profile; or execute a normal landing from a straight-in or circling approach.
AA.VI.D.S14 Use a Multi-Function Display (MFD) and other graphical navigation displays, if installed, to monitor position, track wind drift and other parameters to maintain desired flightpath.
Area of Operation VI. Instrument Procedures › Task E. Precision Approaches
Task E. Precision Approaches
References: 14 CFR parts 91, 97; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing precision approach procedures.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
Area of Operation VI. Instrument Procedures
AA.VI.E.K1 Procedures and limitations associated with a precision approach, including determining required descent rates and adjusting minimums in the case of inoperative equipment.
AA.VI.E.K2 Navigation system displays, annunciations, and modes of operation.
AA.VI.E.K3 Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appropriate use of navigation data, signal integrity).
AA.VI.E.K4 A stabilized approach, including energy management concepts.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.E.R1 Deviating from the assigned approach procedure.
AA.VI.E.R2 Selecting a navigation frequency.
AA.VI.E.R3 Management of automated navigation and autoflight systems.
AA.VI.E.R4 Aircraft configuration during an approach and missed approach.
AA.VI.E.R5 An unstable approach, including excessive descent rates.
AA.VI.E.R6 Deteriorating weather conditions on approach.
AA.VI.E.R7 Continuing to descend below the Decision Altitude (DA)/Decision Height (DH) when the required visual references are not visible.
Skills: The applicant exhibits the skill to:
AA.VI.E.S1 Accomplish the precision instrument approaches selected by the evaluator.
AA.VI.E.S2 Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper communication phraseology.
AA.VI.E.S3 Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
AA.VI.E.S4 Comply in a timely manner with all clearances, instructions, and procedures.
AA.VI.E.S5 Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
AA.VI.E.S6 Advise ATC or the evaluator if unable to comply with a clearance.
AA.VI.E.S7 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
AA.VI.E.S8 Establish the appropriate airplane configuration and airspeed considering meteorological and operating conditions.
AA.VI.E.S9 Maintain altitude ±100 feet, selected heading ±5°, airspeed ±10 knots, and accurately track radials, courses, and bearings, prior to beginning the final approach segment.
AA.VI.E.S10 Adjust the published DA/DH and visibility criteria for the aircraft approach category, as appropriate, to account for NOTAMS, inoperative airplane or navigation equipment, or inoperative visual aids associated with the landing environment.
AA.VI.E.S11 Establish a predetermined rate of descent at the point where vertical guidance begins, which approximates that required for the aircraft to follow the vertical guidance.
AA.VI.E.S12 Maintain a stabilized final approach from the Final Approach Fix (FAF) to DA/DH allowing no more than ¼-scale deflection of either the vertical or lateral guidance indications and maintain the desired airspeed ±5 knots.
Area of Operation VI. Instrument Procedures
AA.VI.E.S13 Upon reaching the DA/DH, immediately initiate the missed approach procedures if the required visual references for the runway are not distinctly visible and identifiable (or if in a seaplane); or transition to a normal landing approach only when the aircraft is in a position from which a descent to a landing on the runway can be made at a normal rate of descent using normal maneuvering.
AA.VI.E.S14 Use an MFD and other graphical navigation displays, if installed, to monitor position, track wind drift and other parameters to maintain desired flightpath.
Area of Operation VI. Instrument Procedures › Task F. Landing from a Precision Approach
Task F. Landing from a Precision Approach
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; SAFO 19001
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing the procedures for a landing from a precision approach.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Note: For non-amphibious seaplanes, this task applies only when the applicant has immediate access to an instrument approach to a waterway.
Knowledge: The applicant demonstrates understanding of:
AA.VI.F.K1 Elements related to the pilot’s responsibilities, and the environmental, operational, and meteorological factors that affect landing from a precision approach.
AA.VI.F.K2 Approach lighting systems and runway and taxiway signs, markings, and lighting.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.F.R1 Selection of an approach procedure and runway based on aircraft limitations, available distance, surface conditions, and wind.
AA.VI.F.R2 Wake turbulence.
AA.VI.F.R3 [Archived]
AA.VI.F.R3a a. [Archived]
AA.VI.F.R3b b. [Archived]
AA.VI.F.R4 Collision hazards.
AA.VI.F.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.VI.F.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AA.VI.F.R7 Attempting to land from an unstable approach.
AA.VI.F.R8 Flying below the glidepath.
AA.VI.F.R9 Transitioning from instrument to visual references for landing.
AA.VI.F.R10 Missed Approach.
AA.VI.F.R11 Land and hold short operations (LAHSO).
Skills: The applicant exhibits the skill to:
Area of Operation VI. Instrument Procedures
AA.VI.F.S1 Maintain the desired airspeed, ±5 knots, and vertical and lateral guidance within ¼-scale deflection of the indicators during the descent from DA/DH to a point where visual maneuvering is used to accomplish a normal landing.
AA.VI.F.S2 Adhere to all ATC or evaluator advisories, such as NOTAMs, windshear, wake turbulence, runway surface, braking conditions, and other operational considerations.
AA.VI.F.S3 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
AA.VI.F.S4 Touch down at the aiming point markings, -250/+500 feet, or where there are no runway aiming point markings, 750 to 1,500 feet, from the approach threshold of the runway.
AA.VI.F.S5 Maintain positive airplane control throughout the landing using drag and braking devices, as appropriate, to come to a stop.
AA.VI.F.S6 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
AA.VI.F.S7 Use runway incursion avoidance procedures, if applicable.
Area of Operation VI. Instrument Procedures › Task G. Circling Approach
Task G. Circling Approach
References: 14 CFR parts 91, 97; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; Terminal Procedures Publications
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a circling approach procedure.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.G.K1 Elements related to circling approach procedures and limitations, including approach categories and related airspeed restrictions.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.G.R1 Prescribed circling approach procedures.
AA.VI.G.R2 Executing a circling approach at night or with marginal visibility.
AA.VI.G.R3 Losing visual contact with an identifiable part of the airport.
AA.VI.G.R4 Management of automated navigation and autoflight systems.
AA.VI.G.R5 Control of altitude, airspeed, and distance while circling.
AA.VI.G.R6 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AA.VI.G.R7 Executing a missed approach after the MAP while circling.
Skills: The applicant exhibits the skill to:
AA.VI.G.S1 Comply with the circling approach procedure considering turbulence, windshear, and the maneuvering capability and approach category of the aircraft.
AA.VI.G.S2 Confirm the direction of traffic and adhere to all restrictions and instructions issued by ATC or the evaluator.
AA.VI.G.S3 Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
Area of Operation VI. Instrument Procedures
AA.VI.G.S4 Establish the approach and landing configuration. Maintain a stabilized approach and a descent rate that ensures arrival at the MDA, or the preselected circling altitude above the MDA, prior to the missed approach point.
AA.VI.G.S5 Maintain airspeed ±5 knots, desired heading/track ±5°, and altitude +100/-0 feet until descending below the MDA or the preselected circling altitude above the MDA.
AA.VI.G.S6 Visually maneuver to a base or downwind leg appropriate for the landing runway and environmental conditions.
AA.VI.G.S7 If a missed approach occurs, turn in the appropriate direction using the correct procedure and appropriately configure the airplane.
Area of Operation VI. Instrument Procedures › Task H. Landing from a Circling Approach
Task H. Landing from a Circling Approach
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; SAFO 19001
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing the procedures for a landing from a circling approach.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates understanding of:
AA.VI.H.K1 Elements related to the pilot’s responsibilities, and the environmental, operational, and meteorological factors that affect landing from a circling approach.
AA.VI.H.K2 Approach lighting systems and runway and taxiway signs, markings, and lighting.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AA.VI.H.R1 Selection of an approach procedure and runway based on aircraft limitations, available distance, surface conditions, and wind.
AA.VI.H.R2 Wake turbulence.
AA.VI.H.R3 [Archived]
AA.VI.H.R3a a. [Archived]
Continue reading ↓ 120 of 235 passages shown