AC 91-70D Oceanic and Remote Continental Airspace Operations including Change 1
The Federal Aviation Administration (FAA) (“we”) developed this AC to provide general information and guidance for certificated and General Aviation (GA) operators (“you”) planning flights in oceanic and remote continental airspace. The principal regulatory reference for this guidance is Title 14 of the Code of Federal Regulations (14 CFR) § 91.703, which incorporates International Civil Aviation Organization (ICAO) Annex 2, Rules of the Air, by reference. ICAO Annex 2, in turn, refers to ICAO Doc 7030, which requires State of the Operator or State of Registry approval for oceanic Required Navigation Performance (RNP) operations. This guidance includes the authorizations you may need for operations in such airspace. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.
U.S. Department of Transportation Federal Aviation Administration
Advisory Circular
Subject: Oceanic and Remote Continental
Airspace Operations
Date: 10/19/26 AC No: 91-70D Initiated by: AFS-400 Change: 1
1. PURPOSE OF THIS ADVISORY CIRCULAR (AC). The Federal Aviation Administration (FAA) (“we”) developed this AC to provide general information and guidance for certificated and General Aviation (GA) operators (“you”) planning flights in oceanic and remote continental airspace. The principal regulatory reference for this guidance is Title 14 of the Code of Federal Regulations (14 CFR) § 91.703, which incorporates International Civil Aviation Organization (ICAO) Annex 2, Rules of the Air, by reference. ICAO Annex 2, in turn, refers to ICAO Doc 7030, which requires State of the Operator or State of Registry approval for oceanic Required Navigation Performance (RNP) operations. This guidance includes the authorizations you may need for operations in such airspace.
2. PRINCIPAL CHANGES. This change reflects adjustments to the FAA designation of the Northern Area of Magnetic Unreliability (AMU) to include the area north of 75° N latitude in the Nuuk (Greenland) flight information region (FIR) and updates references throughout.
PAGE CONTROL CHART
Remove Pages Dated Insert Pages Dated
Pages ii thru iv 4/3/25 Pages ii thru iv 10/19/26
Pages 1-1 and 1-2 4/3/25 Pages 1-1 and 1-2 10/19/26
Pages 2-6, 2-10, and 2-11 4/3/25 Pages 2-6, 2-10, and 2-11 10/19/26
Page 3-2 4/3/25 Page 3-2 10/19/26
Pages 4-2, 4-3, and 4-15 4/3/25 Pages 4-2, 4-3, and 4-15 10/19/26
Pages 5-9, 5-10, and 5-11 4/3/25 Pages 5-9, 5-10, and 5-11 10/19/26
Pages 6-1, 6-4, 6-9, 6-14, and 6-22 4/3/25 Pages 6-1, 6-4, 6-9, 6-14, and 6-22 10/19/26
Pages A-4, A-5, A-6, and A-8 4/3/25 Pages A-4, A-5, A-6, and A-8 10/19/26
Pages B-2 and B-3 4/3/25 Pages B-2 and B-3 10/19/26
10/19/26 AC 91-70D CHG 1
PAGE CONTROL CHART (Continued)
Remove Pages Dated Insert Pages Dated
Pages C-2 thru C-4 4/3/25 Pages C-2 thru C-4 10/19/26
Pages D-1 and D-13 4/3/25 Pages D-1 and D-13 10/19/26
Page F-9 4/3/25 Page F-9 10/19/26
Leisha Bell for Hugh J. Thomas Executive Director, Flight Standards Service
U.S. Department of Transportation Federal Aviation Administration
Advisory Circular
Subject: Oceanic and Remote Continental
Airspace Operations
Date: 4/3/25 AC No: 91-70D Initiated by: AFS-400 Change:
This advisory circular (AC) contains both general information and detailed guidance for operators planning flights in oceanic and remote continental airspace. This includes Performance-based Navigation (PBN) and Special Areas of Operation (SAO). The Federal Aviation Administration (FAA) revised this AC to focus on the evolving operations in oceanic and remote continental airspace. This AC is laid out in a building block format, beginning with foundational information, followed by information on the training, authorizations, and equipment required to operate most efficiently in this airspace, and finishing with flight planning, flight execution, and contingency operations guidance. Our goal is to provide you with a template to guide you through planning and executing flight operations through oceanic and remote continental airspace. Information related to international operations in specific locales continues to be available in the Regional Oceanic Resource Guides for U.S. Operators at https://www.faa.gov/about/officeorg/headquartersoffices/avs/oceanic-resource-guides.
These online resource guides, along with Notices to Airmen (NOTAM) and FAA International Notices, provide the most current information available to pilots, aircraft dispatchers, and other operational control personnel preparing for oceanic and international operations. We have also included hyperlinks to many documents, available free or for purchase. While we carefully checked at the time of publication that information included in this AC is current, oceanic and remote continental airspace operations are constantly evolving, and it is incumbent on you, the operators, to ensure you are flying with current information.
This AC neither is mandatory, nor does it constitute a regulation. When this AC uses mandatory language (e.g., “must” or “may not”), it is quoting or paraphrasing a regulatory requirement or prohibition. When this AC uses permissive language (e.g., “should” or “may”), it describes an acceptable means, but not the only means, of conducting that aspect of operations in oceanic and remote continental airspace. However, if you use the means described in the AC, you must follow them in all important respects.
10/19/26 AC 91-70D CHG 1
ii
CONTENTS Paragraph Page
Chapter 1. General … 1-1
1.1 Purpose of This Advisory Circular (AC) … 1-1
1.2 Audience … 1-1
1.3 Where You Can Find This AC … 1-1
1.4 What This AC Cancels … 1-1
1.5 Fundamental Changes From Previous Edition … 1-1
1.6 Related 14 CFR Parts … 1-1
1.7 Related Reading Material (current editions) … 1-2
1.8 AC Feedback Form … 1-3
Chapter 2. Background Information for Operations in Oceanic and Remote
Continental Airspace … 2-1
2.1 ICAO and its Relationship to U.S. Aviation … 2-1
2.2 ICAO Annexes … 2-1
2.3 Applicability of U.S. and International Regulations … 2-3
2.4 Differing Airspace Requirements … 2-7
2.5 Operational Authorizations … 2-8
2.6 ICAO Guidance Documents and Reference Material … 2-8
Chapter 3. Pilot Qualification and Training Guidance for Oceanic and Remote
Continental Airspace Operations … 3-1
3.1 Training Requirements for Oceanic and Remote Continental Airspace Operations … 3-1
Chapter 4. Communications, Navigation, and Surveillance Systems Guidance for
Operations in Oceanic and Remote Continental Airspace … 4-1
4.1 Communications, Navigation, and Surveillance Improvements—Impact on Air Traffic Service (ATS) … 4-1
4.2 Performance-Based Operations … 4-1
4.3 Voice Communications in Oceanic Airspace … 4-4
4.4 CPDLC and Automatic Dependent Surveillance-Contract (ADS-C) … 4-7
4.5 Data Link Systems—Operational Authorization to Use … 4-10
4.6 Independent Navigation Systems and Proceeding Safely … 4-10
4.7 ATC in Oceanic and Remote Continental Airspace … 4-12
10/19/26 AC 91-70D CHG 1
iii
4.8 Special Use Airspace (SUA) … 4-14
4.9 Air Defense Identification Zones (ADIZ) … 4-15
4.10 World Geodetic System 1984 (WGS 84) … 4-15
Chapter 5. Flight Planning Guidance for International and Oceanic and Remote
Continental Airspace Operations … 5-1
5.1 Lead Time Requirements … 5-1
5.2 Preparing an Itinerary … 5-1
5.3 Crew Fatigue … 5-4
5.4 Required Paperwork/Documentation … 5-5
5.5 Entry to Foreign Airspace—Flight Plan vs. Formal Advance Permission … 5-7
5.6 Managing Risk in Oceanic and Remote Continental Airspace Operations … 5-7
5.7 Weather Forecasts and Other Meteorological Planning … 5-8
5.8 FAA International Notices Web Page … 5-8
5.9 ETOPS … 5-9
5.10 Polar Operations … 5-9
5.11 Areas With Limited or No ATS (Also Called “NO FIR” Areas) … 5-11
5.12 Rotorcraft Operations … 5-12
Chapter 6. Flight Execution Guidance for Operations in Oceanic and Remote
Continental Airspace … 6-1
6.1 General Information … 6-1
6.2 Flight Plan … 6-5
6.3 Aircraft Preflight Guidance … 6-7
6.4 En Route Guidance … 6-14
Chapter 7. In-Flight Contingency Guidance for Operations in Oceanic Airspace … 7-1
7.1 Contingency Procedures: When They May Be Needed … 7-1
7.2 Choosing the Correct Contingency Procedure … 7-1
7.3 Altimetry and/or Navigation Degradation … 7-2
7.4 Lost Communications Procedures … 7-2
7.5 Normal Aircraft Tracking … 7-3
Appendix A. Abbreviations and Definitions … A-1
Appendix B. Operational Authorizations: 14 CFR Part 91 LOAs … B-1
Appendix C. Unusual Weather Activity … C-1
10/19/26 AC 91-70D CHG 1
iv
Appendix D. Sample Oceanic Checklist … D-1
Appendix E. IATA In-Flight Broadcast Procedure … E-1
Appendix F. Special Procedures for In-Flight Contingencies in Oceanic Airspace … F-1
Appendix G. Suggested Subjects for Inclusion in Oceanic and International Procedures
and/or an Operations Manual … G-1
List of Figures
Figure 4-1. Sample CPDLC Route Uplinks … 4-9
Figure 6-1. Sample Plotting Chart … 6-9
Figure 6-2. ARINC 424—Oceanic Waypoints … 6-11
Figure B-1. Single Long-Range Navigation System (LRNS) Area … B-4
Figure C-1. ICAO Volcanic Ash Advisory Centers … C-1
Figure C-2. Example of a National Oceanic and Atmospheric Administration Scales
Activity Report … C-3
Figure E-1. Map of IFBP Area of Applicability … E-2
Figure F-1. Special Procedures for In-Flight Contingencies in Oceanic Airspace
(Non-Weather) … F-1
Figure F-2. Special Procedures for In-Flight Weather Contingencies … F-6
List of Tables
Table 2-1. Regulatory References With Distances From the Nearest Shoreline … 2-5
Table 2-2. Overwater Airspaces and Interrelationships … 2-7
Table 6-1. Examples of Incorrectly Applied Conditional Clearances … 6-2
Table 6-2. Selected Waypoint Entry Methods and Avionics Display … 6-3
Table B-1. Title 14 CFR Part 91 LOAs for Oceanic and/or Remote Areas … B-3
Table F-1. Altitude Offset When Denied Clearance to Deviate 9.3 km (5.0 NM) or More (5 NM Procedures) … F-7
CHAPTER 1. GENERAL › 1.6 Related 14 CFR Parts.
10/19/26 AC 91-70D CHG 1
CHAPTER 1. GENERAL
1.1 Purpose of This Advisory Circular (AC). The Federal Aviation Administration (FAA) (“we”) developed this AC to provide general information and guidance for certificated and General Aviation (GA) operators (“you”) planning flights in oceanic and remote continental airspace. The principal regulatory reference for this guidance is Title 14 of the Code of Federal Regulations (14 CFR) § 91.703, which incorporates International Civil Aviation Organization (ICAO) Annex 2, Rules of the Air, by reference. ICAO Annex 2, in turn, refers to ICAO Doc 7030, which requires State of the Operator or State of Registry approval for oceanic Required Navigation Performance (RNP) operations. This guidance includes the authorizations you may need for operations in such airspace.
Note: This is a guidance document. Its content is not legally binding in its own right and will not be relied upon by the Department as a separate basis for affirmative enforcement action or other administrative penalty. Conformity with the guidance document is voluntary only. Nonconformity will not affect rights and obligations under existing statutes and regulations.
1.2 Audience. We wrote this AC primarily for operators who do not have experience with flying in oceanic and remote continental airspace, to assist in developing their own procedures. We also wrote this AC for GA pilots who do not fly regularly in oceanic and remote continental airspace and need a refresher in planning and executing such a flight. Most certificated operators have company procedures for operations in oceanic and remote continental airspace. Those procedures have been accepted by FAA inspectors and conform to all relevant regulations and guidance. If you are working for one of these operators, this AC may serve to reinforce your company procedures.
1.3 Where You Can Find This AC. You can find this AC on the FAA’s website at https://www.faa.gov/regulations_policies/advisory_circulars and the Dynamic Regulatory System (DRS) at https://drs.faa.gov.
1.4 What This AC Cancels. AC 91-70C, Oceanic and Remote Continental Airspace Operations, dated October 4, 2023, is canceled.
1.5 Fundamental Changes From Previous Edition. This revision of AC 91-70 adds clarifications on navigation equipment regulations and “proceeding safely,” and includes new guidance on dead reckoning. Also, we have adjusted Appendix D, Sample Oceanic Checklist, in light of the removal of separate oceanic clearances in the North Atlantic (NAT).
1.6 Related 14 CFR Parts.
• Sections 91.1 through 91.21, 91.101 through 91.143, 91.151 through 91.159, 91.167 through 91.193, 91.203, 91.205, 91.209 through 91.217, 91.221, 91.225, 91.227, 91.303 through 91.319, 91.323, 91.509, 91.511, 91.605, 91.609, 91.703 through 91.715, 91.903, 91.1039, and 91.1073; and part 91 appendix G.
• Sections 119.5, 119.49, 119.59, and 119.63.
1.7 Related Reading Material (current editions). › 1.7.3 FAA ACs.
10/19/26 AC 91-70D CHG 1
• Sections 121.11, 121.101, 121.121, 121.163, 121.339, 121.349, 121.351, 121.353, 121.355, 121.401, 121.415, 121.427, and 121.445; and part 121 appendix G.
• Sections 125.23, 125.45, 125.51, 125.203, 125.209, 125.296, and 125.363.
• Sections 135.3, 135.43, 135.145, 135.165, 135.167, 135.183, 135.213, 135.323, 135.329, 135.351, 135.364, and 135.381; and part 135 appendix G.
1.7 Related Reading Material (current editions).
1.7.1 RTCA Documents. Available for purchase on the RTCA website at https://www.rtca.org/standards.
1. RTCA DO-258/ED-100, Interoperability Requirements for ATS Applications Using ARINC 622 Data Communications.
2. RTCA DO-260/ED-102, Minimum Operational Performance Standards (MOPS) for 1090 MHz Extended Squitter Automatic Dependent Surveillance – Broadcast (ADS-B) and Traffic Information Services – Broadcast (TIS-B).
3. RTCA DO-306/ED-122, Safety and Performance Standard for Air Traffic Data Link Services in Oceanic and Remote Airspace (Oceanic SPR Standard).
4. RTCA DO-350/ED-228, Safety and Performance Requirements Standard for ATS Data Communications (SPR Standard).
1.7.2 FAA Technical Standard Orders (TSO). Available at https://drs.faa.gov.
1. TSO-C115, Required Navigation Performance (RNP) Equipment Using Multi-Sensor Inputs.
2. TSO-C145, Airborne Navigation Sensors Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS).
3. TSO-C146, Stand-Alone Airborne Navigation Equipment Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS).
4. TSO-C196, Airborne Supplemental Navigation Sensors for Global Positioning System Equipment Using Aircraft-Based Augmentation.
1.7.3 FAA ACs.
1. AC 20-138, Airworthiness Approval of Positioning and Navigation Systems.
2. AC 20-140, Guidelines for Design Approval of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS).
3. AC 20-150, Airworthiness Approval of Satellite Voice (SATVOICE) Equipment Supporting Air Traffic Service (ATS) Communication.
4. AC 90-80, Approval of Offshore Standard Approach Procedures, Airborne Radar Approaches, and Helicopter En Route Descent Areas.
5. AC 90-96, Approval of U.S. Operators and Aircraft to Operate Under Instrument Flight Rules (IFR) in European Airspace Designated for Basic Area Navigation (B-RNAV)/RNAV 5 and Precision Area Navigation (P-RNAV).
CHAPTER 1. GENERAL › 1.8 AC Feedback Form.
6. AC 90-105, Approval Guidance for RNP Operations and Barometric Vertical Navigation in the U.S. National Airspace System and in Oceanic and Remote Continental Airspace.
7. AC 90-114, Automatic Dependent Surveillance-Broadcast Operations.
8. AC 90-117, Data Link Communications.
9. AC 91-85, Authorization of Aircraft and Operators for Flight in Reduced Vertical Separation Minimum (RVSM) Airspace.
10. AC 91-92, Pilot’s Guide to a Preflight Briefing.
11. AC 120-42, Extended Operations (ETOPS and Polar Operations).
12. AC 120-100, Basics of Aviation Fatigue.
13. AC 120-103, Fatigue Risk Management Systems for Aviation Safety.
14. AC 121-31, Flightcrew Sleeping Quarters and Rest Facilities.
15. AC 135-42, Extended Operations (ETOPS) and Operations in the North Polar Area.
1.7.4 FAA Instrument Flight Rules (IFR) Enroute Aeronautical Planning Charts. These charts are available at https://www.faa.gov/air_traffic/flight_info/aeronav/digital_products/ifr.
1. North Atlantic Route Chart.
2. North Pacific Route Chart.
3. Western Atlantic Route System Chart.
1.8 AC Feedback Form. For your convenience, the AC Feedback Form is the last page of this AC. Note any deficiencies found, clarifications needed, or suggested improvements regarding the contents of this AC on the AC Feedback Form.
CHAPTER 2. BACKGROUND INFORMATION FOR OPERATIONS IN OCEANIC
2.2 ICAO Annexes. › 2.2.6 Annex 6, Operation of Aircraft (3 Parts).
AND REMOTE CONTINENTAL AIRSPACE
2.1 ICAO and its Relationship to U.S. Aviation. The United States is a Contracting State to the Convention on International Civil Aviation (Chicago Convention) and an ICAO Member State and has fully supported the organization’s goals from its inception. ICAO works to achieve the highest level of standards and procedures for aircraft, personnel, airways, and aviation services throughout the world. ICAO oversees the international standards ascribed to by its more than 190 Member States for navigation facilities, airports, weather, and radio services. Through active support and participation in ICAO, the FAA strives to improve worldwide safety standards and procedures. ICAO’s strategic objectives are to continue to establish and maintain Standards and Recommended Practices (SARPs) for the safe and orderly development of international aviation. The 19 Annexes to the Chicago Convention (ICAO Annexes) contain more than 10,000 adopted SARPs.
Note: ICAO Member States are obligated to “collaborate in securing the highest practicable degree of uniformity in regulations” and generally achieve this by complying with the SARPs contained in the 19 Annexes and supporting ICAO documents, such as ICAO Doc 4444, Procedures for Air Navigation Services— Air Traffic Management (PANS-ATM), and ICAO Doc 7030, Regional Supplementary Procedures (SUPPS). States notify ICAO of their “differences” with SARPs and publish them in their Aeronautical Information Publication (AIP).
2.2 ICAO Annexes. Find all ICAO Annexes at the ICAO store at https://store.icao.int or at the ICAO eLibrary at https://elibrary.icao.int.
2.2.1 Annex 1, Personnel Licensing. Provides information on licensing of flightcrews, air traffic controllers, and aircraft maintenance personnel, including medical standards for flightcrews and air traffic controllers.
2.2.2 Annex 2, Rules of the Air. Contains visual flight rules (VFR) and instrument flight rules (IFR) for all operators.
2.2.3 Annex 3, Meteorological Service for International Air Navigation. Provides for meteorological services for international air navigation and reporting of meteorological observations from aircraft.
2.2.4 Annex 4, Aeronautical Charts. Contains specifications for aeronautical charts used in international aviation.
2.2.5 Annex 5, Units of Measurement to be Used in Air and Ground Operations. Lists dimensional systems used in air and ground operations.
2.2.6 Annex 6, Operation of Aircraft (3 Parts). Specifies minimum standards for below-listed operations throughout the world:
2.2 ICAO Annexes. › 2.2.14 Annex 14, Aerodromes:
1. Part I, International Commercial Air Transport—Aeroplanes.
2. Part II, International General Aviation—Aeroplanes.
3. Part III, International Operations—Helicopters.
2.2.7 Annex 7, Aircraft Nationality and Registration Marks. Specifies requirements for registration and identification of aircraft.
2.2.8 Annex 8, Airworthiness of Aircraft. Specifies uniform procedures for certification and inspection of aircraft.
2.2.9 Annex 9, Facilitation. Provides for the standardization and simplification of border-crossing formalities.
2.2.10 Annex 10, Aeronautical Telecommunications:
1. Volume I, Radio Navigation Aids. Provides for standardizing communications equipment and systems.
2. Volume II, Communication Procedures including those with PANS status. Standardizes communications procedures.
3. Volume III, Communication Systems. Standardizes communications systems.
4. Volume IV, Surveillance and Collision Avoidance Systems. Standardizes surveillance radar and collision avoidance.
5. Volume V, Aeronautical Radio Frequency Spectrum Utilization. Standardizes aeronautical radio spectrum utilization.
6. Volume VI, Communication Systems and Procedures Relating to Remotely Piloted Aircraft Systems C2 Link (applicable November 26, 2026).
2.2.11 Annex 11, Air Traffic Services. Includes information on establishing and operating air traffic control (ATC), flight information, and alerting services.
2.2.12 Annex 12, Search and Rescue. Provides information on organization and operation of facilities and services necessary for Search and Rescue (SAR).
2.2.13 Annex 13, Aircraft Accident and Incident Investigation. Provides for uniformity in notifying, investigating, and reporting on aircraft accidents.
2.2.14 Annex 14, Aerodromes:
1. Volume I, Aerodrome Design and Operations. Contains specifications for the design and equipment of aerodromes.
2. Volume II, Heliports. Contains specifications for the design and equipment of heliports.
2.3.1.1 Title 14 CFR § 91.511 (applicable to 14 CFR part 91 subpart F)… › 2.3.1.1.2 Title 14 CFR part 91 subpart F overwater operations outside…
2.2.15 Annex 15, Aeronautical Information Services. Includes methods for collecting and disseminating aeronautical information required for flight operations.
2.2.16 Annex 16, Environmental Protection:
1. Volume I, Aircraft Noise. Contains specifications for aircraft noise certification, noise monitoring, and noise exposure units for land-use planning.
2. Volume II, Aircraft Engine Emissions. Contains specifications for aircraft engine emissions.
3. Volume III, Aeroplane CO2 Emissions.
4. Volume IV, Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA).
2.2.17 Annex 17, Aviation Security. Specifies methods for safeguarding international civil aviation against unlawful acts of interference.
2.2.18 Annex 18, The Safe Transport of Dangerous Goods by Air. Contains specifications for labeling, packing, and shipping dangerous cargo.
2.2.19 Annex 19, Safety Management. Describes Safety Management System (SMS) development, regulatory framework, and supporting guidance.
2.3 Applicability of U.S. and International Regulations.
2.3.1 FAA regulations relating to certification, airworthiness, licensing, and certain operational aspects (e.g., operational control, communication and navigation equipment, and Extended Operations (ETOPS)) are applicable to U.S. operators wherever they fly. Some of these regulations are fundamental to oceanic operations:
2.3.1.1 Title 14 CFR § 91.511 (applicable to 14 CFR part 91 subpart F) deals with “overwater” operations which are more than 30 minutes or 100 nautical miles (NM) from the nearest shore.
Note: Title 14 CFR § 91.511(b) notes that a unit is “independent if the function of any part of it does not depend on the functioning of any part of another receiver or electronic navigation unit.”
2.3.1.1.1 For such operations, two independent long-range navigation systems (LRNS) are required, except in an area defined by coordinates in 14 CFR § 91.511(f), where only one LRNS is sufficient.
2.3.1.1.2 Title 14 CFR part 91 subpart F overwater operations outside very high frequency (VHF) voice communication coverage require two long-range communication systems (LRCS), except when an aircraft has two VHF radios, in which case only one high frequency (HF) radio is sufficient.
2.3.2 Similarly, some regulations applicable to U.S. operators wherever… › 2.3.2.3 However, if flightcrews are properly trained, a compass and a…
2.3.1.2 Title 14 CFR §§ 121.351, 125.203, and 135.165 use a different term, extended overwater operations, defined in 14 CFR § 1.1 as more than 50 NM from the nearest shoreline.
2.3.1.2.1 Title 14 CFR § 121.351 specifically requires two “independent long-range navigation systems” for extended overwater operations.
2.3.1.2.2 Title 14 CFR §§ 125.203 and 135.165 use different language, and only require “two approved independent navigation systems suitable for navigating the airplane along the route” within the “degree of accuracy required for ATC.” This allows extended overwater operations along Air Traffic Services (ATS) routes that have ground-based Navigational Aid (NAVAID) coverage, without any LRNS.
2.3.1.2.3 For 14 CFR parts 121, 125, and 135, extended overwater operations “in certain geographic areas” with only a single LRNS can be authorized via the B036 authorization.1
1 FAA operational authorizations (specific approvals) are given in the form of operations specifications (OpSpecs), management specifications (MSpecs), or Letters of Authorization (LOA). For simplicity in this AC, we use the term “authorization.”
2.3.1.2.4 Extended overwater operations outside VHF voice communication coverage require two LRCSs, except for certificated operators who hold the B045 authorization which defines an area by coordinates where only one LRCS is sufficient.
2.3.2 Similarly, some regulations applicable to U.S. operators wherever they fly are fundamental to operations outside ground-based NAVAID coverage, where an LRNS is used. The following are regulatory considerations inherent to those operations:
2.3.2.1 Title 14 CFR §§ 121.349, 125.203, and 135.165 use the term “proceed safely” in the event of loss of navigation capability of the system being used to navigate to the degree of accuracy for ATC, in the context of fuel planning and operations with a “single independent navigation system.”
2.3.2.2 These sections require there to be “at least one other independent navigation system suitable…for proceeding safely to a suitable airport and completing an instrument approach…” A compass and a stopwatch comprise a very rudimentary independent navigation system that is not suitable for navigating within the degree of accuracy required for ATC.
2.3.2.3 However, if flightcrews are properly trained, a compass and a stopwatch can be used together with an operational flight plan to dead reckon. In an unexpected failure situation, dead reckoning can be a valid method to proceed safely. The sections cited above require that the other navigation system be suitable to “complete an instrument approach,” which normally would be an
2.3 Applicability of U.S. and International Regulations. › 2.3.3 Table 2-1 below provides a listing of select regulations that…
instrument landing system (ILS) approach. Additional considerations about dead reckoning are discussed in Chapter 4.
Note: The guidance above pertains to being able to proceed safely when operating with a single independent navigation system that experiences a failure. Equipping an aircraft with multiple independent navigation systems gives operators additional options in unexpected failure situations.
2.3.3 Table 2-1 below provides a listing of select regulations that apply at various distances from the coast of the United States or from the “nearest shoreline.” The table lists some of these regulations and the distance from the coast where they apply. Note that 14 CFR § 91.101 applies to all aircraft, but regulations referencing 50 NM and 100 NM apply to U.S.-registered civil aircraft. The listing is not exhaustive.
Table 2-1. Regulatory References With Distances From the Nearest Shoreline
Distance From the
Coast/Nearest
Shoreline2
Title 14 CFR
Reference Remarks
≤ 12 NM from coast of the United States
§ 91.101 • Title 14 CFR part 91 subpart B applies for operation of aircraft “within 12 nautical miles from the coast of the United States.” • Waters up to and including 12 NM are generally “territorial waters,” which underly “sovereign airspace.”
> 12 NM from coast § 91.7033
2 The term “coast” applies to oceans, whereas the term “shore” or “shoreline” applies to oceans and lakes. 3 Title 14 CFR §§ 125.23 and 135.3 both also refer to 14 CFR § 91.703, which incorporates ICAO Annex 2 by reference.
• Title 14 CFR § 91.703 applies “outside of the United States” and requires compliance with ICAO Annex 2 “when over the high seas.” • The United Nations Convention on the Law of the Sea (UNCLOS) allows coastal states to exercise sovereignty over their “territorial seas” up to a limit not to exceed 12 NM. • Beyond 12 NM is where “high seas” (international) airspace generally begins and where ICAO Annex 2 (regulating “flight and maneuver”) applies.
> 50 NM from nearest shoreline
§ 1.1, Definition of Extended Overwater Operation
Communications and navigation equipment:
• Title 14 CFR § 121.351. • Title 14 CFR § 125.203. • Title 14 CFR § 135.165.
Emergency equipment:
• Title 14 CFR § 121.339. • Title 14 CFR § 125.209.
10/19/26 AC 91-70D CHG 1
Distance From the
Coast/Nearest
Shoreline2
Title 14 CFR
Reference Remarks
• Title 14 CFR § 135.167.
> 50 NM from nearest shore
2.3.5 U.S. operators flying outside U.S. sovereign airspace must abide… › 2.3.5.2 According to 14 CFR §§ 121.11, 125.23(b), and 135.3(a)(2), for…
§ 91.509(a) Survival equipment required for 14 CFR part 91 subpart F (life preservers).
> 100 NM or 30 minutes from nearest shore, whichever is less
§ 91.509(b) Survival equipment required for 14 CFR part 91 subpart F (life rafts).
> 100 NM or 30 minutes from nearest shore
§ 91.511 Communication and navigation equipment required for 14 CFR part 91 subpart F.
2.3.4 The 12 NM distance listed in Table 2-1 above pertains to “Flight Rules.” This, in fact, is the title of 14 CFR part 91 subpart B, which is applicable to all operators in U.S. sovereign airspace only.4 Such so-called “flight and maneuver” regulations are generally harmonized with ICAO rules, in accordance with Article 12 to the Chicago Convention. Exceptions are listed as “Differences” in the relevant AIP. In the U.S. AIP, these are found in Section GEN 1.7, Differences From ICAO Standards, Recommended Practices and Procedures.
4 Exception: Title 14 CFR § 91.703 imposes the following flight rules over the high seas: 14 CFR §§ 91.117(c), 91.127, 91.129, and 91.131. 5 In addition, 14 CFR contains four flight and maneuver regulations (listed in footnote 4) which apply to operations of civil aircraft of U.S. registry over the high seas.
2.3.5 U.S. operators flying outside U.S. sovereign airspace must abide by the “flight and maneuver” regulations in effect for that airspace. If the airspace is “high seas” (per the entry in Table 2-1 above, “high seas” airspace generally begins outside 12 NM from the nearest shore), the applicable rules are found in ICAO Annex 2 and ICAO Doc 7030.5 In other countries’ sovereign airspace, information on regulations is found in the relevant AIP, with Differences from ICAO SARPs also notified there.
2.3.5.1 Title 14 CFR § 91.703 says that you must comply with ICAO Annex 2 if you operate your U.S.-registered aircraft “over the high seas.” Title 14 CFR § 91.703 further requires that you, when within a foreign country, follow the rules “relating to the flight and maneuver of aircraft there in force.”
2.3.5.2 According to 14 CFR §§ 121.11, 125.23(b), and 135.3(a)(2), for operations under each respective part, when operating within a foreign country, you must comply with the air traffic rules of the country concerned and any local airport rules that may be in force. You must also follow all rules of that part that are more restrictive than the rules of the foreign country in which you are operating, as long as you can do so without violating the rules of that country.
CHAPTER 2. › 2.4 Differing Airspace Requirements.
Note: In some countries, ICAO Annex 6 fuel SARPs are in force, which may be more restrictive than applicable 14 CFR rules.
2.3.6 Overwater Airspaces and Interrelationships. Table 2-2 below provides a summary of the various overwater airspaces and their interrelationships.
Table 2-2. Overwater Airspaces and Interrelationships
Type of Airspace High-Level Definition Remarks/Relationship to Other Airspaces
U.S. sovereign airspace
Airspace over land or 12 NM or less from the coast of the United States.
Title 14 CFR part 91 subpart B applies.
High seas airspace
Airspace beyond 12 NM from the coast.
ICAO Annex 2 applies.
Offshore airspace International (high seas)
airspace over water where VHF voice and ATS surveillance (radar and/or Automatic Dependent Surveillance-Broadcast (ADS-B)) coverage exist.
• Begins beyond 12 NM from the coast (high seas). • Usually extends to ~175 NM from the coast. • Normally has a boundary with an OCA. • Does not include OCAs where LRCS are used.
Oceanic Control Area (OCA)
Flight information regions (FIR) where LRCS are required.
Extended overwater operations (14 CFR § 1.1)
Operations greater than 50 NM from the nearest shoreline.
For certificated operators, 14 CFR requirements on emergency equipment and communication and navigation equipment apply.
2.3.6.1 Other distances generally relevant to oceanic flying are:
2.3.6.1.1 A VOR/DME with “High Altitude” (H) standard service volume (SSV) classification has a range of 130 NM. Coastal areas generally have a good network of VOR/DMEs of the (H) SSV classification.
2.3.6.1.2 The typical maximum range for the Air Traffic Service (ATS) surveillance systems (e.g., radar and ADS-B) and VHF voice transceivers is 150–200 NM. For this reason, OCAs typically begin approximately 175 NM from the coast.
2.4 Differing Airspace Requirements. It is quite possible to transit regions with significantly different procedures in one long-range flight. Therefore, you should familiarize yourself with the equipment and procedural requirements to file and fly in
2.6.3 ICAO Publications. › 2.6.3.2 Procedures for Air Navigation Services (PANS) and Regional…
each segment of foreign airspace in which you intend to operate by referencing, for example, the appropriate State’s AIP.
2.5 Operational Authorizations.
2.5.1 Title 14 CFR part 91 operators need LOA B036, Oceanic Required Navigation Performance (RNP) Operations, to indicate oceanic RNP on ATC flight plans. Further discussion on other 14 CFR part 91 LOAs and the application process are in Appendix B, Operational Authorizations: 14 CFR Part 91 LOAs.
2.5.2 Certificated operators (14 CFR parts 121, 125, 121/135, and 135) require OpSpecs, MSpecs, and/or 14 CFR part 125 LOAs. Further information on oceanic and remote continental authorizations for certificated operators is available from the responsible Flight Standards office.
2.6 ICAO Guidance Documents and Reference Material. Find the following ICAO documents at the ICAO store at https://store.icao.int or at the ICAO eLibrary at https://elibrary.icao.int.
2.6.1 Guidance Documents. We developed much of the material in this AC from these foundational documents: ICAO Annexes, other ICAO guidance documents, related sections of 14 CFR, and other FAA guidance material.
2.6.2 Chicago Convention. We single out the following articles of the Convention on International Civil Aviation (listed in ICAO Doc 7300, Convention on International Civil Aviation) because of their importance in regulating international aviation. If you operate in oceanic and remote continental airspace, you should thoroughly understand them.
• Article 1, Sovereignty.
• Article 12, Rules of the Air.
• Article 29, Documents Carried in Aircraft.
2.6.3 ICAO Publications. The principal purpose of ICAO publications is the “systematic and prompt dissemination in concise form of the policies and activities of the Organization.” These publications consist of Annexes, documents with “Procedures for Air Navigation Services” and “Regional Supplementary Procedures” in the name, manuals, and other similar publications. The following is a brief description of each category of publications, beginning with the most authoritative, and moving down the hierarchy.
2.6.3.1 Annexes. There are 19 Annexes (named in paragraph 2.2 above) to the Convention on International Civil Aviation (listed in ICAO Doc 7300). They state the SARPs.
2.6.3.2 Procedures for Air Navigation Services (PANS) and Regional Supplementary Procedures (SUPPS). ICAO publications with “Procedures for Air Navigation Services” in the title have special status, as does the publication “Regional Supplementary Procedures.”
2.6.3 ICAO Publications. › 2.6.3.3 Manuals.
2.6.3.2.1 ICAO Doc 4444, Procedures for Air Navigation Services—Air Traffic Management (PANS-ATM). These procedures complement the SARPs contained in ICAO Annexes 2 and 11, and specify, in greater detail than in the SARPs, the actual procedures ATS units apply when providing various services to air traffic. ICAO Doc 4444 is the primary reference for oceanic contingency procedures, described in Appendix F, Special Procedures for In-Flight Contingencies in Oceanic Airspace.
2.6.3.2.2 ICAO Doc 8168, Procedures for Air Navigation Services—Aircraft Operations (PANS-OPS). This document has three volumes:
1. Volume I, Flight Procedures, describes operational requirements for flying the procedures designed in accordance with the criteria provided in Volume II.
2. Volume II, Construction of Visual and Instrumental Flight Procedures, is intended for the guidance of procedures specialists and describes the essential areas and obstacle clearance requirements for the achievement of safe, regular instrument flight operations. It provides the basic guidelines to States, and those operators and organizations producing instrument flight charts, that will result in uniform practices at all aerodromes where instrument flight procedures are carried out.
3. Volume III, Aircraft Operating Procedures, describes operational procedures recommended for the guidance of flight operations personnel and flightcrew.
2.6.3.2.3 ICAO Doc 7030, Regional Supplementary Procedures. For each ICAO region, ICAO Doc 7030 provides detailed procedures designed to meet those needs of specific areas that are not covered in the worldwide provisions contained in the Annexes and PANS documents. The SUPPS complement the statement of requirements for facilities and services contained in the Air Navigation Plan publications.
Note: To illustrate the hierarchy among ICAO publications, we can look at the topic of communication failure. ICAO Annex 2 details global procedures on communication failure. ICAO Doc 4444 elaborates on those procedures, which, “unless otherwise prescribed on the basis of regional air navigation agreement,” are in effect. ICAO Doc 7030 describes such regional agreements (e.g., area-specific communication failure procedures). FAA principal inspectors (PI) and specialists within the FAA’s Flight Technologies and Procedures Division, Flight Operations Group can help you understand the relationship between various ICAO publications.
2.6.3.3 Manuals. Similar to our ACs, ICAO manuals provide guidance and information concerning selected aspects of aeronautical activity or facilitating the uniform application of ICAO SARPs. Therefore, you should familiarize
2.6.3.3 Manuals. › 2.6.3.3.5 ICAO NAT Doc 007, North Atlantic Operations and Airspace Manual.
10/19/26 AC 91-70D CHG 1
yourself with topics covered in the following documents (current editions) prior to undertaking operations in oceanic and remote continental airspace. The following are the more prominent ICAO manuals:
2.6.3.3.1 ICAO Doc 9574, Manual on a 300 m (1,000 ft) Vertical Separation Minimum Between FL 290 and FL 410 Inclusive. ICAO Doc 9574 provides States’ regional planning groups with a basis for the revision of documents, procedures, and programs to enable the maintenance of a 300 m (1,000 ft) vertical separation minimum between flight level (FL) 290 and FL 410 inclusive, in accordance with the criteria and requirements developed by ICAO. It provides guidance to State aviation authorities on those measures necessary to ensure that the criteria and requirements are met within their area of responsibility, as well as background information for operators to assist in the development of operating manuals and flightcrew procedures.
2.6.3.3.2 ICAO Doc 9613, Performance-based Navigation (PBN) Manual. This manual provides practical guidance on how to implement Area Navigation (RNAV) and Required Navigation Performance (RNP) applications, and how to ensure that the performance requirements are appropriate for the planned application.
2.6.3.3.3 ICAO Doc 9869, Performance-based Communication and Surveillance (PBCS) Manual. This guidance material explains the concepts of Required Communication Performance (RCP) and Required Surveillance Performance (RSP), identifies RCP and RSP requirements applicable to the provision and use of ATS, and provides a basis for the application of RCP and RSP in a specified airspace.
2.6.3.3.4 ICAO Doc 10037, Global Operational Data Link (GOLD) Manual. The GOLD Manual addresses data link service provision, operator readiness, controller and flightcrew procedures, performance-based specifications, and post-implementation monitoring and analysis. GOLD provides guidance and information concerning data link operations and is intended to facilitate the uniform application of ICAO SARPs contained in ICAO Annexes 2, 10, and 11; the provisions in ICAO Doc 4444; and, when necessary, ICAO Doc 7030.
2.6.3.3.5 ICAO NAT Doc 007, North Atlantic Operations and Airspace Manual. This document provides information for aircraft operating agencies, pilots, and dispatchers planning and conducting operations in or above the North Atlantic High Level Airspace (NAT HLA). It also offers guidance to the State regulators responsible for the approval/certification/licensing of such aircraft operators, pilots, or dispatchers.
Note: Operators flying below NAT HLA should pay particular attention to ICAO NAT Doc 007 guidance on flight operations below the NAT HLA.
2.6 ICAO Guidance Documents and Reference Material. › 2.6.4 Other References:
10/19/26 AC 91-70D CHG 1
2.6.4 Other References:
1. ICAO Satellite Voice Guidance Material (SVGM), available at https://www.icao.int/sites/default/files/APAC/Documents/edocs/CNS/SATVOICE_S VGM_v1.pdf. This document is intended to maximize the operational benefits of Satellite Voice (SATVOICE) implementations by promoting seamless and interoperable SATVOICE operations throughout the world. The document provides guidance and information concerning SATVOICE communications for aeronautical use and is intended to facilitate the uniform application of ICAO SARPs contained in ICAO Annex 2, the provisions in ICAO Doc 4444, and, when necessary, ICAO Doc 7030.
2. The FAA website at https://www.faa.gov.
3. Regional Oceanic Resource Guides for U.S. Operators, available at https://www.faa.gov/about/officeorg/headquartersoffices/avs/oceanic-resourceguides.
Note: Contact information for specialists from the Flight Operations Group can be obtained from the responsible Flight Standards office and is available in these resource guides.
4. Applicable FAA Domestic/International Notices and Notices to Airmen (NOTAM).
5. U.S. AIP and applicable foreign AIPs. The AIP is the State’s official publication that defines and describes the airspace, aeronautical facilities, services, and national rules and practices pertaining to air traffic, particularly if they differ from ICAO SARPs (“differences” are listed in AIPs). Eurocontrol maintains a global listing of links to AIPs at https://eurocontrol.int/articles/ais-online. Refer to the current AIP for any States whose airspace you intend to operate in/through.
6. Regulations of the foreign countries over which you intend to fly.
7. The customs procedures, cultural considerations, entry and overflight procedures, and health and safety precautions for each country in which you intend to land.
8. The “Oceanic and Remote” section of the FAA’s Flight Operations Group web page at https://www.faa.gov/about/office_org/headquarters_offices/avs/offices/afx/afs/afs4 00/afs410/oceanic_remote. Refer in particular to the “Oceanic and Remote Continental Application Guides” posted there.
9. The “Data Communications” section of the FAA’s Flight Operations Group web page at https://www.faa.gov/about/office_org/headquarters_offices/avs/offices/af x/afs/afs400/afs410/datacomm/. Refer in particular to the “Data Link Communication Application Guide” posted there.
10. NAT bulletins, found in the “EUR and NAT Documents” area of the ICAO website: https://www.icao.int/EURNAT/EUR-NAT-DOCS?fid=3493.
11. The NAT Central Monitoring Agency (CMA). The NAT CMA hosts a secure site with event reports and summaries at https://natcma.com. Industry stakeholders can request access to deidentified reports.
3.1 Training Requirements for Oceanic and Remote Continental Airspace… › 3.1.3 Relevant Subject Matter.
CHAPTER 3. PILOT QUALIFICATION AND TRAINING GUIDANCE FOR OCEANIC
AND REMOTE CONTINENTAL AIRSPACE OPERATIONS
3.1 Training Requirements for Oceanic and Remote Continental Airspace Operations.
3.1.1 Certificated Operator Training. Certificated operators are required to have training approved by the Administrator.6 This normally takes place during the certification process and prior to issuance of operational authorizations.
3.1.2 General Aviation (GA) Training. If you are a GA pilot desiring to indicate oceanic Required Navigation Performance (RNP) capability, you need operational authorization via an LOA B036 (see Appendix B, Operational Authorizations: 14 CFR Part 91 LOAs, paragraph B.1).7 An optional LOA B030 is available for Remote Continental operations. The following are options for training:
1. Completing an operator’s oceanic operations current training program.
2. Completing a commercial oceanic operations current training program.
3. Submitting military training records indicating prior oceanic operations experience.
4. Using other methods indicating that you can safely conduct oceanic operations. Examples could include written testing, oral testing, or evidence of prior recent experience.
3.1.3 Relevant Subject Matter. The following items are examples of the subject matter with which you should be familiar in order to conduct operations in oceanic and remote continental airspace (as required based on the types of operations being conducted):
1. Title 14 CFR (applicable parts).
2. ICAO Standards and Recommended Practices (SARPs) and measurement standards.
3. Operator’s international operating procedures, to include the international operations manual,8
6 References are 14 CFR §§ 91.1073, 121.401, 125.296, and 135.323. 7 Regulatory reference is 14 CFR § 91.703, which incorporates ICAO Annex 2 by reference. Annex 2, in turn, refers to ICAO Doc 7030, which requires State of the Operator or State of Registry approval for oceanic RNP operations. 8 See also Appendix G, Suggested Subjects for Inclusion in Oceanic and International Procedures and/or an Operations Manual.
its organization and structure, and access via Electronic Flight Bag (EFB), as applicable.
4. Use of oceanic flight planning charts.
5. Sources and content of international flight publications.
6. Itinerary planning and overflight clearances.
7. Meteorology, including Significant Weather (SIGWX) charts, prognostic weather charts, tropopause prognostic charts, and Terminal Aerodrome Forecasts (TAF), as well as space weather.
10/19/26 AC 91-70D CHG 1
8. Preparation of international flight plans, plotting charts, and operational flight plans/flight logs, to include Equal Time Point (ETP) calculations. These include the communications, navigation, and surveillance capability codes appropriate to your aircraft and your operational authorization.
9. Specific airspace requirements, to include communications, navigation, and surveillance equipment requirements and operational authorizations, as well as operational procedures related to organized track systems (OTS), Reduced Vertical Separation Minimum (RVSM), and RNP.
10. Long-range, air-to-ground communication procedures, including all data link and satellite communications (SATCOM) voice operations, as applicable.
11. En route and terminal procedures—differences from U.S. procedures.
12. Use of oceanic checklists.
13. Oceanic error risk mitigations.
14. Understanding of Strategic Lateral Offset Procedures (SLOP).
15. Air traffic clearances, to include proper terminology and phraseology.
16. Emergency and contingency procedures (see Appendix F, Special Procedures for In-Flight Contingencies in Oceanic Airspace), including contingency procedures for weather diversions, required emergency equipment, Search and Rescue (SAR) techniques, communication failure procedures, and navigation equipment failure techniques (to include dead reckoning).
17. Specialized training (e.g., if conducting operations in areas of magnetic unreliability (AMU), or, for 14 CFR parts 121 and 135, Extended Operations (ETOPS) “preclude and protect” philosophy, as applicable).
18. Use of polar/AMU checklists.
19. Polar/remote continental terrain awareness, risk mitigations, and contingency options.
Note: For additional training topics, see Appendix G and the list of dead reckoning topics under paragraph 4.6.3.
CHAPTER 4. COMMUNICATIONS, NAVIGATION, AND SURVEILLANCE
SYSTEMS GUIDANCE FOR OPERATIONS IN OCEANIC AND REMOTE
4.2 Performance-Based Operations. › 4.2.1 Performance Specifications.
CONTINENTAL AIRSPACE
4.1 Communications, Navigation, and Surveillance Improvements—Impact on Air Traffic Service (ATS).
4.1.1 Technological Advances. Technological advances in communications, navigation, and surveillance systems all contribute to an air traffic system that provides increased navigational accuracy and allows you and your aircraft to interact more quickly with controllers. These advances have also improved controller-pilot communications, navigation accuracy, and aircraft surveillance reporting. This enhanced communications, navigation, and surveillance capability greatly reduces the errors and retransmissions that hampered oceanic flights just a few years ago. These safety improvements have facilitated corresponding improvements in efficiency and capacity by reducing separation minima, allowing controllers to space aircraft closer together. Trials of new separation minima or implementations of new operating procedures are common in oceanic airspace. Operators should therefore make sure they have the most up-to-date information concerning the airspace in which they will be flying. U.S. and foreign State Aeronautical Information Publications (AIP), Notices to Airmen (NOTAM), and related publications are normally the best sources of current information. International operations manuals that consolidate this information should be current.
4.1.2 Automatic Dependent Surveillance-Broadcast (ADS-B). ADS-B supports these improvements by providing a higher update and enhanced accuracy of surveillance information over the current radar-based surveillance systems.
4.1.3 Space-Based ADS-B. In 2019, a constellation of low-Earth orbit satellites with ADS-B receivers began supplying surveillance data to ATS Providers (ATSP). Shortly thereafter, ICAO published a new separation standard for areas under ADS-B surveillance where very high frequency (VHF) voice communications are not available. This new separation standard allows aircraft to be more closely spaced in oceanic areas, which in turn allows more efficient routing. While space-based ADS-B update rates are comparable to those of some domestic radar systems, communication systems traditionally used in oceanic and remote continental airspace do not perform as quickly as the VHF voice communications used in domestic environments. Consequently, aircraft cannot yet be spaced as closely as in domestic areas. As communication systems evolve, allowable separation between aircraft will likely be reduced further.
4.2 Performance-Based Operations.
4.2.1 Performance Specifications. The three performance specifications, Required Communication Performance (RCP), Required Navigation Performance (RNP), and Required Surveillance Performance (RSP), determine required separation between flights.
10/19/26 AC 91-70D CHG 1
4.2 Performance-Based Operations. › 4.2.3 RNP.
4.2.2 RCP. RCP establishes aircraft/controller communications timeline, safety, equipment, and flightcrew training standards. Generally, RCP is specified in terms of the timeline required to complete the communication transaction and the continuity, availability, and integrity of the transaction. In addition, RCP includes criteria for monitoring and alerting. In oceanic and remote continental airspace, RCP 240 and RCP 400 are the relevant communications-related performance specifications.
4.2.2.1 RCP 240 requires a 99.9 percent probability (continuity) the communications transaction will complete in less than 240 seconds (timeline). It also requires a 99.9 percent9
9 RTCA DO-350B, published in September 2023, relaxed the availability requirement to 99.8 percent. As of late 2026, ICAO Doc 9869 Second Edition was still current and listed the RCP 240 requirement for availability as 99.9 percent. 10 RTCA DO-350B, published in September 2023, relaxed the availability requirement to 99.8 percent. As of late 2026, ICAO Doc 9869 Second Edition was still current and listed the RCP 400 requirement for availability as 99.9 percent.
probability the communication can be initiated (availability) and no more than 10-5 communications transaction malfunctions per flight-hour (integrity).
4.2.2.2 RCP 400 requires a 99.9 percent probability (continuity) the communications transaction will complete in less than 400 seconds (timeline). It also requires a 99.9 percent10 probability the communication can be initiated (availability) and no more than 10-5 communications transaction malfunctions per flight-hour (integrity).
4.2.2.3 U.S. operators desiring Performance-based Communication and Surveillance (PBCS) approval for qualifying systems (e.g., with RCP 240 and RSP 180) can obtain the A056 authorization. See paragraph 4.5 below.
4.2.2.4 For additional details, please refer to AC 90-117, Data Link Communications; and ICAO Doc 10037, Global Operational Data Link (GOLD) Manual, and ICAO Doc 9869, Performance-based Communication and Surveillance (PBCS) Manual, Appendix B, RCP Specifications, at https://store.icao.int.
4.2.3 RNP. RNP establishes aircraft navigation accuracy, equipment, and flightcrew training standards. In addition, RNP includes criteria for monitoring and alerting. ICAO Doc 9613, Performance-based Navigation (PBN) Manual, outlines these standards. Generally, we measure these standards in terms of accuracy, integrity, continuity, availability, and functionality. Oceanic and remote continental airspace ATSPs primarily provide RNP 10 (also known as Area Navigation (RNAV) 10) and RNP 4-based separation minima. RNP 2 applications have also become available for oceanic and remote continental airspace, to be used by individual States as necessary to meet their airspace requirements. In all cases, ATSPs will apply appropriate separation minima between adjacent aircraft based on the capabilities each aircraft operator files in the flight
4.2 Performance-Based Operations. › 4.2.5 Access to Performance-Based Separation.
10/19/26 AC 91-70D CHG 1
plan. You must only indicate the oceanic RNP capability authorized in your B036 authorization.11
11 Regulatory reference is 14 CFR § 91.169, which refers to 14 CFR § 91.153. This requires the flight plan to include “any other information the pilot in command or ATC believes is necessary for ATC purposes.” 12 RTCA DO-350B, published in September 2023, relaxed the availability requirement to 99.8 percent. As of late 2026, ICAO Doc 9869 Second Edition was still current and listed the RSP 180 requirement for availability as 99.9 percent. 13 RTCA DO-350B, published in September 2023, relaxed the availability requirement to 99.8 percent. As of late 2026, ICAO Doc 9869 Second Edition was still current and listed the RSP 400 requirement for availability as 99.9 percent.
1. RNP 10 requires accuracy to be within 10 nautical miles (NM) 95 percent of the time.
2. RNP 4 requires accuracy to be within 4 NM 95 percent of the time and within 8 NM 99.999 percent of the time.
3. RNP 2 requires accuracy to be within 2 NM 95 percent of the time and within 4 NM 99.999 percent of the time.
Note: Regardless of RNP value, pilots are expected to fly the centerline (or where use of Strategic Lateral Offset Procedures (SLOP) is authorized, up to 2 NM right of course).
4.2.4 RSP. RSP establishes aircraft/controller surveillance timeline, safety, and equipment standards. Generally, RSP is specified in terms of the timeline required to complete the transaction and the continuity, availability, and integrity of the transaction. In addition, RSP includes criteria for monitoring and alerting. In oceanic and remote continental airspace, RSP 180 and RSP 400 are the relevant performance specifications.
4.2.4.1 RSP 180 requires a 99.9 percent probability (continuity) the surveillance transaction will complete in less than 180 seconds (timeline). It also requires a 99.9 percent12 probability the communication can be initiated (availability) and no more than 10-5 communications transaction malfunctions per flight-hour (integrity).
4.2.4.2 RSP 400 requires a 99.9 percent probability (continuity) the surveillance transaction will complete in less than 400 seconds (timeline). It also requires a 99.9 percent13 probability the communication can be initiated (availability) and no more than 10-5 communications transaction malfunctions per flight-hour (integrity).
4.2.4.3 For additional details, please refer to ICAO Doc 9869.
4.2.5 Access to Performance-Based Separation. Communications, navigation, and surveillance capabilities of aircraft and crew determine eligibility for operational authorizations, which in turn allow operators to take advantage of performance-based separation in oceanic and remote continental airspace. The significant improvements in communications, navigation, and surveillance systems have allowed air traffic controllers
4.3.1 High Frequency (HF) Radio Communications. › 4.3.1.5 In general, higher frequencies (above 10.0 megahertz (MHz))…
to reduce separation between aircraft, expanding access to more favorable routing and/or altitudes that offer savings in time and fuel.
4.3 Voice Communications in Oceanic Airspace. When operating over the high seas, ICAO Annex 2, Rules of the Air, requires you to maintain a continuous air-to-ground voice communication watch with the appropriate ATS authority on the appropriate communication channel.
Note: It is not acceptable to depend solely on other aircraft providing a radio relay to satisfy this requirement. The appropriate authority for the airspace where you conduct the flight may prescribe the aeronautical stations and frequencies used for two-way communications.
4.3.1 High Frequency (HF) Radio Communications. HF radios have been in use for almost a century over oceanic and remote continental areas. As technological advances lead to more sophisticated methods of communication, HF equipment has also improved. HF radios now offer digital tuning, compact size, selective calling systems (SELCAL) (see paragraph 4.3.2 below), and new antenna concepts. Consider the following when using HF communications:
4.3.1.1 HF radio calls are typically made to a radio operator, who in turn electronically relays the information, via keyboard and preformatted messages, to air traffic controllers in oceanic centers. There is some delay between your requests and air traffic control (ATC) clearances, where the radio operator coordinates with the appropriate controller. Radio operators do not have the authority to issue ATC clearances on their own.
4.3.1.2 Communications over HF radio rely heavily on proper radio terminology and scripted reports. Use the published guidance found in enroute publications or the Aeronautical Information Manual (AIM) to make sure you deliver messages in the proper format. Speak at a moderate speed using the internationally accepted phraseology. You may find ICAO standard phraseology in ICAO Doc 9432, Manual of Radiotelephony. This document and other ICAO reference materials are available on ICAO’s website at https://store.icao.int.
4.3.1.3 If ATC uses the terms “expect” or “when can you accept,” they have not granted you a clearance. Typically, oceanic radio operators will use the phraseology “ATC clears…” when relaying a clearance.
4.3.1.4 ICAO Doc 4444, Procedures for Air Navigation Services—Air Traffic Management (PANS-ATM), requires the flightcrew to read back level instructions, heading and speed instructions, and ATC route clearances. Ensure that the radio operator acknowledges your exact read back to confirm that you correctly heard the instructions.
4.3.1.5 In general, higher frequencies (above 10.0 megahertz (MHz)) work better during daylight and lower frequencies (below 10.0 MHz) at night. It is
common to use several frequencies on one flight while communicating with the same ATSP.
4.3.1.6 HF communications are dependent on transmitted signals striking the ionosphere and reflecting back to antennae at ground stations. The ionosphere is susceptible to interference from space weather, resulting in periods where HF reception is marginal or unreadable. You may especially notice this phenomenon in polar regions above 60° N or below 60° S and during periods of significant solar activity.
4.3.2 SELCAL. › 4.3.2.4 Check HF SELCAL even when your Controller-Pilot Data Link…
4.3.2 SELCAL. SELCAL is a means to alert an individual aircraft that a ground station wishes to communicate with it. ATSPs can transmit SELCAL signals over VHF or HF. The signals produce an audio tone and possibly a cockpit indication that alerts you to initiate contact with the appropriate ATC unit.
4.3.2.1 The SELCAL codes are controlled by a commercial service and are assigned to a specific aircraft. Since the number of unique SELCAL 16-tone codes is less than the number of aircraft with SELCAL capability, multiple aircraft could be operating and logged in with the same SELCAL code assignment.
4.3.2.2 When you apply for SELCAL codes for your aircraft, the issuing company will deconflict duplicate codes by region as much as possible. However, aircraft flying in multiple regions may encounter another aircraft using the same code. Therefore, you should be certain that the ATS radio operator uses your exact call sign when responding to a SELCAL.
4.3.2.3 New SELCALs use 32 tones, instead of only 16 tones currently used, and thereby increase the number of unique identifiers exponentially. The ICAO Communication Panel approved the global implementation of SELCAL 32 for revisions to take effect in November 2022. SELCAL 32 compliant equipment became available beginning in 2020. Operators with 16-tone HF SELCALs may continue to encounter a duplicate code situation.
4.3.2.4 Check HF SELCAL even when your Controller-Pilot Data Link Communications (CPDLC) are working properly. You should do a SELCAL check prior to oceanic entry and then again at each control area (CTA) boundary. See the sample transcript of an HF SELCAL check below.
Sample Transcript of HF SELCAL Check
HF call from the air: “New York Radio, Airline 123, request SELCAL Check.”
Answer from the ground:
“Airline 123, New York Radio, roger.” [SELCAL tones transmitted]
HF call from the air: [If successful] “SELCAL okay.”
4.3.3 Satellite Voice (SATVOICE). › 4.3.3.3 If SATVOICE is used (as authorized in the relevant AIP) as the…
4.3.3 Satellite Voice (SATVOICE). In keeping with ICAO’s recognition of SATVOICE as a valid long-range communication system (LRCS), the FAA accommodates SATVOICE through arrangements with the recognized Aeronautical Mobile Satellite (Route) Service providers. The FAA currently restricts direct SATVOICE contact between the pilot and FAA ATC to “distress and urgency situations,” or other exceptional circumstances only. For oceanic communications with ATC via New York Radio and San Francisco Radio, relevant SATVOICE policy and short codes are published in the U.S. AIP.
4.3.3.1 The FAA requires SATVOICE equipment supporting ATS communications to be installed in accordance with AC 20-150, Airworthiness Approval of Satellite Voice (SATVOICE) Equipment Supporting Air Traffic Service (ATS) Communication.14 Additional requirements are listed in the U.S. AIP. Portable satellite phones are not approved for normal and routine ATC communications.
14 Regulatory references are 14 CFR § 91.703 and ICAO Annex 2, paragraph 3.6.5.1. The U.S. AIP, in describing the “appropriate communication channel,” invokes AC 20-150.
4.3.3.2 Additionally, the FAA requires a SATVOICE Callback Check when pilots use SATVOICE to communicate with ATC via New York Radio or San Francisco Radio. A sample transcript is here:
Sample Transcript of SATVOICE Callback Check
SATVOICE call from the air:
“New York Radio, Airline 123, request SATVOICE Callback Check.” For aircraft equipped with both Inmarsat and Iridium: “…on Inmarsat/Iridium (as applicable)”
Answer from the ground:
“Airline 123, roger, terminating call, will call you right back.”
New SATVOICE call from ground:
“Airline 123, New York Radio with your SATVOICE Callback, how do you read?”
SATVOICE answer from the air:
“Loud and clear, SATVOICE Callback Check good, good day!”
4.3.3.3 If SATVOICE is used (as authorized in the relevant AIP) as the sole voice LRCS, for purposes of maintaining a continuous air-to-ground voice communication watch with the relevant ATS authority on the appropriate communication channel, several important considerations apply:
1. Flightcrews should be thoroughly familiar with SATVOICE use, to include the aural and visual alerts for incoming calls, call answering, display and selection of call priority, use of press-to-talk switches, call setup with or without the avionics phone book, call preemption, and call termination.
CHAPTER 4. › 4.4 CPDLC and Automatic Dependent Surveillance-Contract (ADS-C).
2. Avionics (e.g., flight management computer (FMC)) phone books should be organized in a logical, easy-to-understand manner, and flightcrews should have the appropriate number preloaded to facilitate rapid call setup with the relevant ATS authority. Calls should be managed to ensure a line is always available for an incoming “Operational High” priority (Priority 2/Q12) call from the relevant ATS authority.
3. For purposes of compliance with 14 CFR requirements on numbers of LRCS, the FAA recognizes SATVOICE as an approved LRCS only in areas where the ground infrastructure supports SATVOICE as the “sole voice LRCS.” Such services are described in the relevant AIP. In areas lacking this designation, at least one operable HF (voice) radio is required.15
15 Regulatory references are 14 CFR § 91.703 and ICAO Annex 2, paragraph 3.6.5.1. The applicable AIP describes the “appropriate communication channel.”
4. As SATVOICE technology evolves, ensure that you comply with the latest guidance. In the United States, refer to the entry in the U.S. AIP, with new changes published in the FAA’s International Notices. For additional guidance, refer to the FAA’s AIM, ICAO’s Satellite Voice Guidance Material (SVGM), and/or the relevant AIP.
4.3.4 Changes to Communications Procedures. Information needed on initial contact with an agency, radio frequencies, and other aspects of oceanic communications are changed frequently. Thus, it is important that you consult the appropriate AIP, international notices, current oceanic charts, and commercial enroute publications for the most current information.
• ICAO NAT Doc 007, North Atlantic Operations and Airspace Manual, describes North Atlantic (NAT) operations, to include communication and navigation procedures in NAT airspace. The NAT section of ICAO Doc 7030, Regional Supplementary Procedures (SUPPS), currently requires HF SELCAL checks, meaning that an HF radio is required in NAT airspace.
• Commercially published navigation charts contain details of communication procedures on inserted panels. Exercise some caution in using this reference, as they may be on a different update cycle than the source documents and therefore could be not completely up to date.
4.4 CPDLC and Automatic Dependent Surveillance-Contract (ADS-C). Data link communications systems are widely used throughout the world and are normally used in concert with ADS-C systems that further improve ATS capability. CPDLC technology improves communications between aircraft and ATSPs. CPDLC replaces most of the often-challenging HF voice communications that were the only communication link with oceanic and remote continental airspace air traffic controllers for decades. With CPDLC, you and the controller transfer ATC clearance requests and instructions digitally,
4.4 CPDLC and Automatic Dependent Surveillance-Contract (ADS-C). › 4.4.3 FAA Domestic CPDLC Use of Free Text in Route Uplinks.
reducing the likelihood of miscommunication. CPDLC compliant with RCP 240 and ADS-C compliant with RSP 180 are required to fly the most efficient routes in the NAT.
Note: In ADS-C, C = “Contract.” The controller sets up one or more electronic contracts with your aircraft to automatically provide time-triggered (periodic) and/or condition-triggered (e.g., waypoint change event or deviation event) reports. In addition, a controller, at any time, can issue a “demand” contract for a single periodic ADS-C report.
4.4.1 Title 14 CFR Requirements for LRCS. For purposes of compliance with 14 CFR requirements on numbers of LRCS (see paragraph 2.3.1 above), the FAA recognizes CPDLC that is compliant with RCP 240 as an approved LRCS. Equipage with CPDLC does not eliminate the requirement for at least one operable voice LRCS. This means that (as is mentioned in paragraph 4.3.3.3, item 3) unless the relevant AIP authorizes SATVOICE as a sole voice LRCS, at least one operable HF (voice) radio is required.
4.4.2 Access to Preferred Airspace. Since equipment like CPDLC and ADS-C improves the efficiency with which aircraft in oceanic and remote continental airspace can be controlled, such better-equipped aircraft are being better served through initiatives to reserve preferred blocks of oceanic airspace for those aircraft. Preferred altitudes and routes around the world are more readily issued to aircraft equipped with robust communications, navigation, and surveillance capabilities.
4.4.3 FAA Domestic CPDLC Use of Free Text in Route Uplinks. The FAA’s domestic flight data processing systems automatically add so-called “Free Text” messages containing the entire cleared route, to all route clearance change messages. This allows pilots to more readily see and understand the given change. However, oceanic systems do not do this. The result is that pilots accustomed to the FAA domestic display of route clearances could be confused when seeing an oceanic route uplink. Figure 4-1, Sample CPDLC Route Uplinks, shows how a CPDLC route uplink might look if sent from a U.S. domestic system versus an oceanic system.
Figure 4-1. Sample CPDLC Route Uplinks
Sample Route Uplink With Free Text
(Used by domestic FAA systems)
“Route clearance” is readily visible.
Sample Route Uplinks Without Free Text
(Used by oceanic systems)
With this FMS, to view the “route clearance,” the pilot must advance to the next page, then select the “ATC CLNC” prompt.
This is not a clearance to proceed direct to HOIST.
With this FMS, to view the “route clearance,” the pilot must select the “LOAD” prompt.
This is not a clearance to proceed direct to EVRIN.
4.5 Data Link Systems—Operational Authorization to Use. We grant operational authorization for operators to use Future Air Navigation System (FANS) data link in oceanic areas by issuing the A056 authorization, as appropriate.
4.6 Independent Navigation Systems and Proceeding Safely. › 4.6.2 For remote continental operations at lower altitudes closer to…
16 AC 90-117 provides information on the A056 authorization. 17 AC 90-117 cites the regulatory basis for this requirement, which is 14 CFR § 91.123. 18 The phrase “jamming or spoofing” is used in this AC. There are other phrases to describe these phenomena, such as “disruption or manipulation” or the broader term “radio-frequency interference (RFI).”
16
Note: The A056 authorization also applies to VHF data link communications in overland areas outside the United States, such as Aeronautical Telecommunication Network (ATN) Baseline 1 (B1) (formerly Link 2000+), used in European airspace.
4.5.1 Oceanic Data Link Requires Authorization. U.S. operators (including 14 CFR part 91) must have a data link authorization to file ATC flight plan capability codes J5 and/or J7 in oceanic airspace.17 These codes denote Inmarsat and Iridium satellite communications (SATCOM) capability, respectively. You can find our guidance on the process and procedures for operational authorization and aircraft data link system approval in the following documents:
• AC 20-140, Guidelines for Design Approval of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS).
• AC 90-117.
4.5.2 Data Link Requirements and Standards. You can consult ICAO Doc 10037 for additional information on data link requirements and standards.
4.6 Independent Navigation Systems and Proceeding Safely. Regulations on navigation equipment for overwater operations require dual independent navigation systems. As is mentioned in paragraph 2.3.2, several sections in 14 CFR (notably, in 14 CFR parts 121, 125, and 135) use the term “proceeding safely” in the context of fuel planning and operations with a single independent navigation system.
4.6.1 To satisfy requirements for an independent navigation system, a pilot would normally be able to revert to a ground-based Navigational Aid (NAVAID). In areas outside the coverage of ground-based NAVAIDs, immediately reverting to another navigation capability is constrained. Here, 14 CFR requirements to be able to “proceed safely” when using “a single independent navigation system” are particularly relevant.
4.6.2 For remote continental operations at lower altitudes closer to terrain, dead reckoning procedures must be robust to be able to proceed safely in the event of loss of navigation capability. In addition, for any operations that rely solely on Global Positioning System (GPS) for navigation, dead reckoning procedures are particularly important so flightcrews can safely deal with degradation (e.g., through jamming or spoofing18) of GPS signal.
4.6 Independent Navigation Systems and Proceeding Safely. › 4.6.4 For operations at low altitudes permitted by the B030 remote…
4.6.3 Flightcrews that rely on dead reckoning procedures should be familiar with the following topics:
1. Dead reckoning procedures, to include use of operational flight plans.
2. Aircraft systems, to include behavior in jamming or spoofing of GPS signal situations, as well as recovering from any residual effects (as applicable):
• Navigation system(s).
• SATCOM system(s); SATVOICE, as well as data communication systems that use SATCOM.
• Aircraft Terrain Awareness and Warning Systems (TAWS), ground proximity warning system (GPWS), and/or enhanced ground proximity warning system (EGPWS).
• Synthetic visual system.
3. ATS surveillance systems and ATC’s ability to assign headings using radar:
• ADS-B and ADS-C reliance on GPS; behavior with jamming or spoofing of GPS signal.
• Airport surveillance radar (ASR) and precision approach radar (PAR) capability.
• FAA ATC Minimum Vectoring Altitude Chart (MVAC) and Minimum Instrument Flight Rules (IFR) Altitude (MIA) chart.
4. Use of charts with depictions of terrain and obstacle clearance altitudes:
• Minimum en route altitude (MEA).
• Off-route obstruction clearance altitude (OROCA).
• Minimum obstruction clearance altitude (MOCA).
5. Designated mountainous areas.
Note: Dead reckoning is not an approved means of navigation under IFR. It is also not a suitable method for navigating “within the degree of accuracy required for ATC.” It is only suitable for “proceeding safely,” as a contingency in case of degradation or failure of the primary navigation system.
4.6.4 For operations at low altitudes permitted by the B030 remote continental authorization, in most cases, proceeding safely after a loss of navigation capability would include climbing to the quadrant OROCA or higher. Weather conditions must be consistent with procedures to proceed safely. For example, for an aircraft not capable of flight into icing conditions, if such conditions just above the IFR MEA preclude climbing to the OROCA, weather conditions on the given route could be inconsistent with the requirement to be able to proceed safely in the event of loss of navigation capability. In this case, the operator would have to alter the route or delay the flight, as appropriate.
4.7.1 Procedural Airspace. › 4.7.1.4 Controllers manage longitudinal separation in procedural…
4.6.5 The FAA approves operators’ ability to revert to dead reckoning procedures before issuing associated authorizations. This approval allows a stopwatch and a compass to be considered suitable “for proceeding safely,” where regulations call for “one other independent navigation system” in the event of an unexpected failure of the system being used to navigate to the degree of accuracy for ATC, as discussed in paragraph 2.3.2. In such a failure situation, that “other” system would also have to be suitable to “complete an instrument approach,” normally an instrument landing system (ILS) approach.
4.7 ATC in Oceanic and Remote Continental Airspace.
4.7.1 Procedural Airspace. In oceanic and remote continental airspace, ATC typically requires position reports via voice or ADS-C, and controllers apply “procedural separation,” spacing aircraft farther apart than in domestic “ATS surveillance airspace” (where radar or ADS-B surveillance is accompanied by VHF voice communication with ATC). Space-based ADS-B provides significant improvements in surveillance, but without ATC being able to issue a vector via VHF voice communications, required separation between aircraft is greater. In areas with space-based ADS-B surveillance that lack direct VHF voice communications with the controller, ATC still therefore provides at least some elements of procedural control.
4.7.1.1 In procedural airspace, ATC issues clearances and instructions providing separation vertically and horizontally, based on the specific aircraft equipment authorizations you indicate on your flight plan.
4.7.1.2 ATC monitors your compliance with the issued clearance. Your aircraft position reports are processed for conformance with the clearance. If your aircraft is equipped with ADS-C, it provides trigger alerting for lateral and vertical deviations.
4.7.1.3 In order to make this procedural separation work the way it is designed, you must provide timely and accurate time estimates (estimated time of arrival (ETA)) and operate with strict discipline and adherence to ATC clearances and procedures, both normal and contingency.19
19 ICAO Annex 2, paragraph 3.6.2.2d), says: “if the time estimate…changes in excess of 2 minutes from that previously notified to air traffic services…the flight crew shall notify the appropriate air traffic services unit as soon as possible.” For aircraft providing automatic position reports via ADS-C, position reports can be omitted “in airspace where ADS-C services are provided.”
4.7.1.4 Controllers manage longitudinal separation in procedural airspace by assigning speeds, as necessary, either true Mach number or true airspeed. Proper separation of aircraft is dependent upon pilots maintaining the speed assigned with the clearance (not to be confused with the speed filed on the flight plan).
• If traffic conditions permit, the controller may permit variations. However, if a controller assigns a speed, compliance with that speed is mandatory.
4.7.3 U.S. ATS. Information on provision of ATS by the United States is… › 4.7.3.4 Remote Continental Airspace.
• Even when a controller permits variations, ICAO Annex 2 specifies that pilots must inform ATC of speed variations of Mach 0.02 or greater from the current flight plan (current clearance).
4.7.2 ICAO Procedures for Specific Geographical Areas. You will find detailed procedures for the applicable ICAO Region in ICAO Doc 7030. When flying over the high seas (international airspace, generally greater than 12 NM from the nearest coast), 14 CFR § 91.703 requires compliance with ICAO Annex 2. Annex 2, in turn, refers to ICAO Doc 7030. You should consider ICAO Doc 7030 regulatory.
4.7.3 U.S. ATS. Information on provision of ATS by the United States is available in FAA Order JO 7400.11, Airspace Designations and Reporting Points. Also refer to 14 CFR part 71.
4.7.3.1 Domestic Airspace. (ICAO refers to this as “Continental” Airspace.) In sovereign airspace (over land and territorial waters of the United States), the United States provides ATS using domestic ATC procedures with radar or ADS-B surveillance and VHF communications.
4.7.3.2 Offshore Airspace. In “high seas” airspace (outside of the 12 NM sovereign limit) extending to as far as the useful range of radar and VHF communications systems permits, approximately 150–200 NM from the coast, the United States provides ATS using domestic policies and procedures.
Note: As discussed in Table 2-1, 14 CFR part 91 subpart B applies in U.S. sovereign airspace, and ICAO Annex 2 applies in “high seas” airspace.
4.7.3.3 Oceanic Airspace. The United States provides ATS using procedural control in oceanic airspace as follows:
• Atlantic Ocean: New York, Miami, and San Juan flight information regions (FIR).
• Pacific Ocean: Oakland and Anchorage CTA/FIR.
• Arctic Ocean: Anchorage Arctic CTA/FIR.
Note: The Houston Air Route Traffic Control Center (ARTCC) has an “Oceanic” control area, but the FAA provides ATS surveillance services in that airspace using ADS-B and VHF transmitters on oil platforms.
4.7.3.4 Remote Continental Airspace. The United States provides ATS in remote continental airspace as follows: Alaska remote continental airspace; Anchorage ARTCC.
4.8 Special Use Airspace (SUA). › 4.8.3 Restricted Areas.
4.7.4 Advanced Technologies and Oceanic Procedures (ATOP). U.S. controllers use the ATOP flight data processing system in the airspace of Oakland Oceanic, New York Oceanic, and Anchorage Oceanic and Arctic FIRs.
4.7.4.1 Within this airspace, ATOP allows for establishing the separation minima for all pairs of aircraft along a cleared profile and provides aircraft profile conformance monitoring and protection.
4.7.4.2 ATOP deciphers ATC flight plan information to determine what separation standards may be applied to a particular aircraft based on filed aircraft equipage. Accordingly, you must notify ATC immediately if your communications, navigation, and surveillance equipment capability degrades below that which you listed in your flight plan.20
20 Regulatory reference is 14 CFR § 91.169, which refers to 14 CFR § 91.153. This requires the flight plan to include “any other information the pilot in command or ATC believes is necessary for ATC purposes.” The U.S. AIP states that pilots must “advise ATC” if equipment failures render the filed capability indicators inaccurate.
4.7.4.3 ATOP analyzes cleared routes of aircraft and alerts controllers of potential future conflicts (scalable to more than 2 hours ahead) with other aircraft. ATOP also considers different separation standards applied by adjacent ATC facilities and can warn the controller when a conflict will occur based on the adjacent ATC facility’s requirements. This allows controllers to effectively plan for transitions to adjacent FIRs.
4.7.4.4 You can find specific information regarding ATC separation standards in FAA Order JO 7110.65, Air Traffic Control. Additionally, trial periods where new separation standards are being applied will be announced on the FAA’s International Notices web page.
4.8 Special Use Airspace (SUA).
4.8.1 Warning Area. A warning area, as defined in 14 CFR § 1.1, is airspace of defined dimensions extending from 3 NM outward from the coast of the United States that contains activity that may be hazardous to nonparticipating aircraft. The purpose of such a warning area is to warn nonparticipating pilots of the potential danger. A warning area may be located over domestic or international waters or both.
4.8.2 Prohibited Areas. ICAO Annex 2 specifies that these areas exist “above the land areas or territorial waters of a State, within which the flight of aircraft is prohibited.”
4.8.3 Restricted Areas. ICAO Annex 2 specifies that these areas exist “above the land areas or territorial waters of a State, within which the flight of aircraft is restricted in accordance with certain specified conditions.”
4.10 World Geodetic System 1984 (WGS 84). › 4.10.1 Operations in Areas That Are Not WGS 84-Compliant.
10/19/26 AC 91-70D CHG 1
Note: Carefully review charts for these types of areas when you plan your flight, taking note of the area operating times and restrictions. You should also review applicable oceanic NOTAMs.
4.9 Air Defense Identification Zones (ADIZ). Title 14 CFR Part 99, Security Control of Air Traffic, discusses defense areas and the ADIZ. You can check 14 CFR part 99, the latest U.S. AIP, the latest AIM (Chapter 5, Air Traffic Procedures, Section 6, National Security and Interception Procedures), and all FAA NOTAMs Domestic/International to ensure compliance with national security requirements in the ADIZ.
4.10 World Geodetic System 1984 (WGS 84). ICAO and the United States endorse the WGS 84 or approved equivalent as the geodetic reference datum standard for air navigation latitude and longitude coordinates. WGS 84 provides for a common geodetic reference system and a means to standardize aeronautical surveys and related products. You should determine in advance whether any countries you intend to fly over or into are WGS 84-compliant. Information about WGS 84 compliance is often noted on charts used in terminal operations or on airfield diagrams. A State’s AIP generally notes compliance with WGS 84. Most areas of the world are listed as: 1) Unknown (U); 2) Partially Compliant (PC); 3) Compliant (C); or 4) Noncompliant (NC) with WGS 84.
Note: Commercial charting vendors also post information on their websites about specific countries and their compliance with WGS 84.
4.10.1 Operations in Areas That Are Not WGS 84-Compliant. As of late 2026, while most countries are at least “partially compliant” with WGS 84, some aerodromes remain noncompliant. Flight manuals may include a note for RNAV systems indicating that, for terminal areas that are not WGS 84-compliant, the crew should deselect the use of Global Navigation Satellite Systems (GNSS) and use ground-based NAVAIDs for navigation. You should be familiar with your flight manual limitations as well as any country-specific procedures published in State AIPs when flying in countries or terminal areas that are not WGS 84-compliant.
5.2 Preparing an Itinerary. › 5.2.1 Itinerary Factors.
CHAPTER 5. FLIGHT PLANNING GUIDANCE FOR INTERNATIONAL AND
OCEANIC AND REMOTE CONTINENTAL AIRSPACE OPERATIONS
5.1 Lead Time Requirements.
5.1.1 Preparation. Your preparation for a successful oceanic and remote continental and/or international flight, whether you fly large or small aircraft, starts with adequate training and planning. The lead time required for planning varies depending on such things as experience, training, and currency, as well as specific country requirements, and could exceed 30 days. Dispatch/flight locator departments of 14 CFR part 121 operators and large 14 CFR part 135 operators with good familiarity and experience with such flights can sometimes work with shorter lead times. Commercial flight planning companies used by 14 CFR part 91 and smaller 14 CFR part 135 operators can offer similar services.
5.1.2 Awareness. Ensure you are aware of current and special notices relating to entry and overflight requirements for the countries on your itinerary. In most cases outside North America and Europe, you obtain prior permission to land in or overfly a country directly from that country’s Civil Aviation Authority (CAA). You can also find information on immunizations, ports of entry, and other important requirements in the country’s Aeronautical Information Publication (AIP) and in various commercial publications.
5.1.3 Verification. You should allow enough lead time to ensure your planning is thorough, complete, and correct. You should also cross-check and verify any flight planning products against the appropriate source documents. By doing so, you could uncover potential errors before they result in a pilot deviation.
5.2 Preparing an Itinerary.
5.2.1 Itinerary Factors. You should consider the following questions when developing your itinerary:
1. What airspace, routes, speeds, and altitudes do I fly to get to my destination(s)?
2. Are there any terrain clearance concerns along those routes at those altitudes?
3. Is the flying time to suitable and available en route alternates from along those routes and altitudes appropriate for the aircraft and operating part? (Plotting Equal Time Points (ETP) will help answer this question.)
4. Are there any pitfalls I should be aware of from each State’s AIP?
5. What communications, navigation, and surveillance equipment and authorizations must I have in order to fly my intended routes and altitudes?
6. Will I be operating in a Special Area of Operation (SAO)? Do I have the necessary operational authorization(s) to do so? (See Appendix B, Operational Authorizations: 14 CFR Part 91 LOAs.)
CHAPTER 5. › 5.2.2 Administrative, Country-Specific Issues and Requirements.
7. With regard to my Global Navigation Satellite System (GNSS) equipment, are there any World Geodetic System 1984 (WGS 84) compliance issues in countries I intend to transit? (Paragraph 4.10 provides information on WGS 84.)
8. What survival equipment must I have on board in order to fly my intended routes?
9. Are there suitable en route and destination alternates available in the event of an emergency diversion at other than my intended en route altitude? Are there terrain clearance or oxygen considerations at those divert altitudes?
10. Does my preferred destination have instrument approaches and arrival and departure procedures that are compatible with my aircraft equipment and authorizations?
11. What crew rest requirements will I have for each destination?
Note: See paragraph 5.3 below regarding fatigue management issues.
12. Should I use a flight planning or dispatch service for my trip?
13. Have I reviewed the following:
• Oceanic error mitigation procedures?
• Oceanic flight planning, plotting charts, navigation, and waypoint procedures?
• My oceanic checklist?
• Strategic Lateral Offset Procedures (SLOP)?
• En route procedures for all airspace I will pass through?
• Oceanic contingency procedures?
14. Are there specific pilot certification, type rating, and/or medical certificate requirements for the countries I will be visiting? Are single-pilot operations authorized?
15. Will my intended route take me through areas of volcanic activity?
16. If my route takes me through polar areas, have I researched the risks inherent to operations on polar routes? (Paragraph 5.10 provides information on polar operations.)
17. Extended Operations (ETOPS) consideration: Will I be operating more than:
a. Title 14 CFR part 121: 60 minutes (two-engine airplanes) or 180 minutes (more
than two-engine passenger airplanes) from an adequate airport?
b. Title 14 CFR part 135: 180 minutes from an adequate airport?
5.2.2 Administrative, Country-Specific Issues and Requirements. As part of your itinerary preparation, asking the following additional questions can help you determine the country-specific issues/airspace requirements that might affect your international flight:
1. Do I require overflight and landing permits for any of the airspace/airfields I will transit?
5.2.2 Administrative, Country-Specific Issues and Requirements. › 5.2.3 Airport-Specific Issues.
2. How much will overflight and landing fees cost, and how do I pay for each airspace and destination I intend to transit (e.g., credit card, cash, local currency, U.S. currency)?
3. How much advance notification do I need to provide prior to arrival?
Note: All countries require some form of advance notification of arrival. You should carry a copy of the advance notification, as well as confirmation that the notification was sent. This is particularly important for countries that do not normally return approvals.
4. What are the availability, types, and duration of visas, tourist cards, and other required entry documents for all countries I intend to visit, as well as those with potential alternate airports (in the event I have to divert)?
Note: Some countries require that you have a visa for the next country of entry before departure, as well as proof of required immunizations for that country. You can obtain this information from the U.S. Department of State (DOS).
5. Are there prohibitions, restrictions, notices, and/or applicable travel advisories for countries I intend to visit?
Note: The FAA’s website includes a special section on prohibitions, restrictions, notices, and DOS travel advisories applicable to foreign countries at https://www.faa.gov/air_traffic/publications/us_restrictions. This is a particularly important aspect of your flight planning.
6. What is the normal work week for countries I intend to overfly/enter?
Note: Understanding this will help you coordinate for visas and overflight/landing permits. You can obtain this information from the DOS.
7. Are there any import regulations I need to consider, given the amount of time I intend to remain in the countries on my route?
Note: Aircraft that remain within the territorial limits of a country for an extended period may become subject to import regulations and impoundment.
8. What hours are customs, immigration, and other services operational?
9. Do I intend to conduct any operations that might be considered “cabotage?”
5.2.3 Airport-Specific Issues. Consider the following airport-specific issues when planning for your overseas trip:
1. What time considerations can affect your trip?
• What is local time at each of my destination airports in terms of Coordinated Universal Time (UTC)?
• What is local time at my original departure airport?
• Are there restrictions on operating at night in the countries I intend to transit?
• Do any of the airspaces/destinations I intend to transit require slot times?
5.3 Crew Fatigue. › 5.3.5 Sleep Aids.
2. Is a Prior Permission Only (PPO) number required for landing?
3. Do my preferred destination and alternate airfields have the appropriate grade of fuel and other types of aircraft handling services available?
4. Are maintenance services available at my destination airfields?
5. Should I bring spare parts for my aircraft?
6. Will I have lodging available at the destination?
5.3 Crew Fatigue.
5.3.1 Fatigue Management. International travel typically involves crossing time zones and interrupting normal sleep patterns (circadian rhythm). Ensure you have a plan for how you will manage fatigue for you and your crew.
5.3.2 Fatigue Management Strategies. AC 120-100, Basics of Aviation Fatigue, discusses strategies to mitigate the effects of fatigue and is an excellent resource. AC 120-103, Fatigue Risk Management Systems for Aviation Safety, discusses the Fatigue Risk Management Systems (FRMS) prescribed in 14 CFR part 117. While 14 CFR part 117 does not apply to all operators, we recommend you review both ACs as the contents cover issues that are important to all aircrews. Although a Fatigue Risk Management Plan (FRMP) is only required for 14 CFR part 121 operators, the FAA recommends any operator who frequently conducts long-range flights to objectively assess the risks of flightcrew fatigue and implement some form of a plan to reduce those risks.
5.3.3 Self-Care and Time Zone Differences. Having a high level of physical fitness, using caffeine strategically, and avoiding alcohol can help you adjust to time zone differences, allow your body to rest better, and help make you a more effective, safer operator.
5.3.4 Preparing to Mitigate Fatigue. Inquire in advance about day sleeping or noise levels in the location where you intend to get your crew rest. This will help your crewmembers know what challenges to good rest might lie ahead. You should also consider adding pilots for long-duration flights or those outside of normal sleep times. This will help mitigate fatigue issues and promote safer flying.
5.3.5 Sleep Aids. Make sure you understand the restrictions on using sleep aids and the importance of consulting an Aviation Medical Examiner (AME) prior to use. They will advise you on the possible side effects of sleep aids. We have built a list of approved prescription sedative-hypnotic-type drugs approved for use under certain conditions.
• Information regarding pharmaceutical sleep aids is available on the FAA’s website.
• This website includes names of many popular sleep aids. It also includes the required wait time after taking the last dose before you can fly (“pill to push” time).
5.4.1 Documentation. › 5.4.1.1 Aircraft/Aircrew Documentation.
5.4 Required Paperwork/Documentation. Whenever you fly into, from, or over foreign territory, you must comply with that territory’s regulations. Ensure that you have all required entry documents available for presentation upon arrival; you may need to provide multiple copies of each.
5.4.1 Documentation. Local authorities may ask to see the below-listed types of paperwork. The Articles of the Chicago Convention specify those items marked with a double plus sign (++).
5.4.1.1 Aircraft/Aircrew Documentation. It is important to note that you may be responsible for additional documentation requirements that this list does not include.
1. Airworthiness certificate.++
2. Aircraft registration++ (some States do not allow temporary certificates).
3. Radio station license.++
• ICAO Annex 6, Operation of Aircraft, Part I, International Commercial Air Transport—Aeroplanes, requires that one member of the flightcrew hold a valid radio telephone operator’s license “authorizing operation of the type of radio transmitting equipment to be used.”
• The European Union Aviation Safety Agency (EASA) has published inspector guidance for its Ramp Inspections program that references the requirement in Article 30 of the Chicago Convention at https://www.easa.europa.eu/sites/default/files/dfu/SAFA%20Ramp%2 0Inspections%20Guidance%20Material%20-%20Version%202.0.pdf. Some operators have found it useful to create a ramp inspection binder for easy access to required documents.
• For U.S. domestic flights operating only on very high frequency (VHF), the Federal Communications Commission (FCC) does not require the license.
4. Minimum equipment list (MEL) (or Master Minimum Equipment List (MMEL) if operator plans to operate under this option).
5. Airplane Flight Manual (AFM) with Weight and Balance (W&B) information and metric conversion tables, if applicable.
6. Copies of aircraft and engine logbooks.
7. Import papers for aircraft of foreign manufacture.
8. Operational authorizations.
Note: Some countries require an operational authorization and/or an airworthiness statement for certain operations.
5.4.1 Documentation. › 5.4.1.2 Trip-Specific Documentation.
9. Ownership papers.
10. Certificates of insurance, if applicable.
11. Authorization letters from the operating company or the aircraft owner (original signature required), if applicable.
Note: For privately owned aircraft where the owner is not on board, many countries require a letter from the owner before they will allow operations within their country (you can find specific information on this letter and other requirements in the AIP of the countries concerned).
12. Licenses.
13. Crewmember certificates.++
Note: Pay special attention to medical certificates, as expiration rules vary from country to country; consult the AIP for those countries where you intend to land.
5.4.1.2 Trip-Specific Documentation. The following information will change for each flight but should be available for authorities:
1. Passenger manifest, containing complete names of passengers and places of embarkation and destinations of each.++
2. Cargo manifest and detailed declaration of the cargo, if carried.++
3. Copies of overflight and landing permissions.
4. General declarations.
5. Journey logbook, signed by the pilot in command (PIC).++ ICAO Annex 6 identifies the components of the journey logbook as listed below. Consult the AIP for the country you are visiting for their particular requirement.
• Airplane nationality and registration.
• Date.
• Names of crewmembers.
• Duty assignments of crewmembers.
• Place of departure.
• Place of arrival.
• Time of departure.
• Time of arrival.
• Hours of flight.
• Nature of flight (private, aerial work, scheduled, or nonscheduled).
• Incidents and observations, if any.
• Signature of person in charge.
CHAPTER 5. › 5.6 Managing Risk in Oceanic and Remote Continental Airspace Operations.
5.4.1.3 Personal Documentation for Crew and Passengers. When planning a trip to or from a foreign country, ensure that all travelers have proper personal documentation (passports and visas, as required). You may find the requirements for individual countries at https://travel.state.gov.
5.5 Entry to Foreign Airspace—Flight Plan vs. Formal Advance Permission.
5.5.1 Permission for Airspace Entry. When the foreign Air Traffic Service (ATS) authority accepts your flight plan and issues you a flight clearance, you have not necessarily received official approval for entering that State’s airspace. The governing CAA may independently require permission for airspace entry, and your destination airfield may require permission as well.
5.5.2 Flight Plans. Your flight plan provides advance notice of foreign airspace penetration and facilitates effective air traffic control (ATC) procedures. For some countries, your flight plan is the only advance notice required; other countries use your flight plan as a check against previously granted permission to enter national airspace.
5.5.3 State AIPs. During your pretrip planning, as noted in paragraphs 5.1.2, 5.2.1, and 5.2.2 above, consult the AIP for the States you will transit to determine any overflight/landing permits and whether prior permission is required. Ensure you allow plenty of lead time to request and obtain all necessary permissions.
5.6 Managing Risk in Oceanic and Remote Continental Airspace Operations. Operators should have a risk management process before conducting oceanic operations (per ICAO Annex 19, Safety Management, originally issued in 2013). Many of the topics included in earlier portions of this chapter should be included as elements of your risk assessment. Operators are strongly encouraged to research the information available on the FAA website, both from the standpoint of oceanic operations planning and risk management overall. Non-airline operators are also encouraged to review the material specifically earmarked for airline operators. You can get good ideas from that information.
Note: The Automated Mutual-assistance Vessel Rescue (AMVER) system, sponsored by the United States Coast Guard (USCG), is a computer-based voluntary global ship reporting system used worldwide by Search and Rescue (SAR) authorities to arrange for assistance to persons in distress at sea. The AMVER website is located at https://www.amver.com. Operators conducting oceanic operations are encouraged to be familiar with AMVER in case of a potential ditching. Once the operator notifies ATC of a possible ditching, all merchant vessels registered with AMVER and within 100 nautical miles (NM) of the aircraft’s predicted ditching position will be notified.
CHAPTER 5. › 5.8 FAA International Notices Web Page.
5.7 Weather Forecasts and Other Meteorological Planning.
5.7.1 National Weather Service (NWS). The NWS provides weather, hydrologic, and climate forecasts and warnings for the United States, its territories, adjacent waters, and ocean areas. Title 14 CFR parts 91 subpart K (part 91K), 121, and 135 operators must use an approved weather source (i.e., NWS or FAA-approved).21
21 Regulatory references are 14 CFR §§ 91.1039, 121.101, and 135.213. 22 Regulatory references are 14 CFR §§ 91.1039, 121.101, and 135.213.
5.7.2 Weather Sources. As representatives of the Administrator, Principal Operations Inspectors (POI) may approve, via the A010 authorization (required for 14 CFR parts 91K, 121, and 135), the following weather sources:
• The NWS for the United States and its territories.
• U.S. and North Atlantic Treaty Organization (NATO) military observing sources.
• Meteorological offices or automated observations operated by ICAO Member States (as long as the States subscribe to ICAO meteorological standards and practices (i.e., list no differences to ICAO Annex 3, Meteorological Service for International Air Navigation)).
• Members of the World Meteorological Organization (WMO).
5.7.3 Enhanced Weather Information Systems (EWINS). Many certificated operators utilize an EWINS. EWINS are systems for gathering, evaluating, and disseminating aviation weather information, and for issuing weather reports and forecasts prepared by properly trained and qualified aviation meteorologists or aircraft dispatchers. Air carriers typically use a proprietary EWINS. Title 14 CFR parts 91K, 121, and 135 operators require FAA approval via the A010 authorization to use EWINS.22
5.7.3.1 Each carrier’s EWINS must have sufficient procedures, personnel, and communications and data processing equipment to effectively obtain, analyze, and disseminate aeronautical weather data. An EWINS source may produce weather analyses and forecasts based on meteorological observations provided by the Federal Government.
5.7.3.2 For an explanation of EWINS, refer to FAA Order 8900.1, Volume 3, Chapter 26, Section 4, Enhanced Weather Information Systems. Approval to use EWINS weather products is issued on a case-by-case basis and is currently only applicable to 14 CFR part 91K program managers and 14 CFR part 121 or 135 certificate holders (CH), who may either act as their own EWINS or contract for services from an outside source. These approved operators may conduct flight operations using the weather analyses and forecasts produced by their approved EWINS.
5.8 FAA International Notices Web Page. International Notices include Flight Prohibitions Notices and International Oceanic Airspace Notices that could affect your decision to
Continue reading ↓ 120 of 349 passages shown