Radar Vectors
Advisory Circular Current Issued Jan 14, 2025 AFS-400 84 pages Copy saved Nov 18, 2026

AC 90-114C Automatic Dependent Surveillance-Broadcast Operations

The intent of this AC is to facilitate operations using Automatic Dependent Surveillance-Broadcast (ADS-B) technology in compliance with Title 14 of the Code of Federal Regulations (14 CFR) §§ 91.225 and 91.227. The appendices provide guidance on additional ADS-B Out and ADS-B In operations that may be authorized by the Administrator. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.

Official source ↗ Open PDF

U.S. Department of Transportation Federal Aviation Administration

Advisory Circular

Subject: Automatic Dependent

Surveillance-Broadcast Operations

Date: 1/14/25 AC No: 90-114C Initiated by: AFS-400 Change:

In May 2010, the Federal Aviation Administration (FAA) issued Title 14 of the Code of Federal Regulations (14 CFR) §§ 91.225 and 91.227. This rule requires Automatic Dependent Surveillance-Broadcast (ADS-B) Out performance when operating in designated classes of airspace within the U.S. National Airspace System (NAS) after January 1, 2020, unless authorized by air traffic control (ATC). This advisory circular (AC) provides users of the NAS guidance regarding how to conduct operations in accordance with 14 CFR §§ 91.225 and 91.227. The appendices in this AC provide guidance for additional operations enabled by ADS-B, including ADS-B In. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.

Hugh J. Thomas for Robert M. Ruiz Acting Executive Director, Flight Standards Service

ii

CONTENTS Paragraph Page

Chapter 1. Automatic Dependent Surveillance-Broadcast Operations … 1-1

1.1 Purpose of This Advisory Circular (AC) … 1-1

1.2 Audience … 1-1

1.3 Where You Can Find This AC … 1-1

1.4 What This AC Cancels … 1-1

1.5 Scope … 1-1

1.6 AC Feedback Form … 1-2

Chapter 2. Overview and System Description … 2-1

2.1 Overview … 2-1

2.2 ADS-B System Description … 2-1

2.3 ADS-B Broadcast Services … 2-2

2.4 Use of ADS-B In Information for Traffic Situational Awareness … 2-2

Chapter 3. Operational Considerations … 3-1

3.1 U.S. ADS-B Airspace and Equipment Performance Requirements … 3-1

3.2 Exceptions to Airspace Requirements … 3-3

3.3 Traffic Awareness Beacon System (TABS) … 3-3

Chapter 4. Operating Procedures … 4-1

4.1 General Operating Procedures … 4-1

4.2 Operator Familiarity of the Installed ADS-B System … 4-1

4.3 ADS-B Equipment Operations (U.S. Airspace) … 4-1

4.4 Flight Plans (FP) … 4-9

4.5 Preflight Requirements (U.S. Airspace) … 4-12

4.6 Flightcrew Entry of Required ADS-B Data … 4-15

Appendix A. ADS-B In-Trail Procedure … A-1

Appendix B. CAVS Using ADS-B In … B-1

Appendix C. ADS-B In Operations—Aircraft Qualification and Maintenance … C-1

Appendix D. Definitions … D-1

Appendix E. Related Regulations and Reading Material … E-1

Appendix F. Interval Management … F-1

Appendix G. CDTI Assisted Separation On Approach … G-1

iii

List of Figures

Figure 3-1. Automatic Dependent Surveillance-Broadcast Airspace Rule

(14 CFR § 91.225) Diagram … 3-2

Figure A-1. Reduction of Aircraft Separation Minima With In-Trail Procedure … A-1

Figure A-2. In-Trail Procedure Distances Illustrated … A-3

Figure A-3. Similar Track … A-4

Figure A-4. In-Trail Procedure Climb/Descent Variations … A-7

Figure F-1. Maintain Current Spacing … F-7

Figure F-2. Capture Then Maintain … F-7

Figure F-3. Achieve-by Then Maintain (Cross) … F-8

Figure F-4. Final Approach Spacing … F-8

Figure G-1. Controller Identifies CAS-A TTF Aircraft … G-5

Figure G-2. Controller Issues Instruction to Follow the Designated Traffic Along With

Approach Clearance … G-6

List of Tables

Table 4-1. Aircraft Identification Transmission Examples … 4-17

Table A-1. In-Trail Procedure Initiation/Maneuver Criteria

(Reference RTCA DO-312 Supplement) … A-12

Table A-2. Flightcrew Standardized Free Text Controller-Pilot Data Link

Communication Message Set for In-Trail Procedure … A-13

Table A-3. Controller Free Text Controller-Pilot Data Link Communication Message

Set for In-Trail Procedure … A-14

Table F-1. Clearance Element Formats … F-6

Table F-2. Interval Management Clearance Types Summarized … F-9

1.5 Scope. › 1.5.3 Certification and Installation of ADS-B Out Equipment.

CHAPTER 1. AUTOMATIC DEPENDENT SURVEILLANCE-BROADCAST

OPERATIONS

1.1 Purpose of This Advisory Circular (AC). The intent of this AC is to facilitate operations using Automatic Dependent Surveillance-Broadcast (ADS-B) technology in compliance with Title 14 of the Code of Federal Regulations (14 CFR) §§ 91.225 and 91.227. The appendices provide guidance on additional ADS-B Out and ADS-B In operations that may be authorized by the Administrator. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.

1.2 Audience. This AC applies to all operators intending to use ADS-B within the U.S. National Airspace System (NAS).

1.3 Where You Can Find This AC. You can find this AC on the Federal Aviation Administration’s (FAA) website at https://www.faa.gov/regulations_policies/advisory_cir culars and the Dynamic Regulatory System (DRS) at https://drs.faa.gov.

1.4 What This AC Cancels. AC 90-114B, Automatic Dependent Surveillance-Broadcast Operations, dated December 30, 2019, is canceled.

1.5 Scope. This AC contains an overview of the ADS-B system and general operating procedures in compliance with the airspace and performance requirements of 14 CFR §§ 91.225 and 91.227. The appendices provide guidance on additional ADS-B Out and ADS-B In operations that may be authorized by the Administrator.

1.5.1 Obligation. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way. This document is intended only to provide clarity to the public regarding existing requirements under the law or agency policies. This AC is not mandatory and does not constitute a regulation. The guidance contained herein is not legally binding in its own right and will not be relied upon by the FAA as a separate basis for affirmative enforcement action or other administrative penalty. Conformity with the guidance document is voluntary only, and nonconformity will not affect rights and obligations under existing statutes and regulations. This AC describes an acceptable means, but not the only means, to meet the requirements of 14 CFR.

1.5.2 Authorization to Conduct ADS-B Out Operations. The FAA does not require an authorization to conduct ADS-B Out operations in the airspace specified in 14 CFR § 91.225 (U.S. airspace). However, pilots, dispatch personnel, and maintenance personnel should be familiar with the information provided in this AC.

1.5.3 Certification and Installation of ADS-B Out Equipment. AC 20-165, Airworthiness Approval of Automatic Dependent Surveillance - Broadcast OUT Systems, contains guidance associated with the installation and airworthiness approval of ADS-B Out equipment.

Note: Outside the U.S. NAS, many worldwide Air Traffic Service Providers (ATSP) allow the use of ADS-B equipment certified to the European Union Aviation Safety Agency (EASA) Acceptable Means of Compliance (AMC) 20-24, Certification Considerations for the Enhanced ATS in Non-Radar Areas Using ADS-B Surveillance (ADS-B-NRA) Application via 1090 MHz Extended Squitter. EASA AMC 20-24 is intended for Non-Radar Areas (NRA). However, AMC 20-24 equipment does not necessarily comply with 14 CFR § 91.225.

CHAPTER 1. AUTOMATIC DEPENDENT SURVEILLANCE-BROADCAST OPERATIONS › 1.6 AC Feedback Form.

1.6 AC Feedback Form. For your convenience, the AC Feedback Form is the last page of this AC. Note any deficiencies found, clarifications needed, or suggested improvements regarding the contents of this AC on the Feedback Form.

CHAPTER 2. OVERVIEW AND SYSTEM DESCRIPTION

2.1 Overview. Starting with the National Airspace System (NAS)-wide implementation of ADS-B, the FAA has begun to facilitate improvements needed to increase the capacity and efficiency of the NAS while maintaining safety. ADS-B supports these improvements by providing a higher update rate and enhanced accuracy of surveillance information over the current radar-based surveillance systems. In addition, ADS-B enables the expansion of air traffic control (ATC) surveillance services into areas where none existed previously. The ADS-B ground system also provides Traffic Information Service-Broadcast (TIS-B) and Flight Information Service-Broadcast (FIS-B) for use on appropriately equipped aircraft, enhancing the user’s situational awareness and improving the overall safety of the NAS.

2.2.3 ADS-B Avionics Operating Modes. › 2.2.3.2 ADS-B In.

2.2 ADS-B System Description.

2.2.1 ADS-B System Architecture. The ADS-B system architecture is composed of aircraft avionics and an Air Traffic Service Provider (ATSP) infrastructure. Onboard “position source” avionics determine the position of the aircraft, typically by using the Global Navigation Satellite Systems (GNSS) and transmitting this and additional information about the aircraft to receiver stations for use by ATC, to ADS-B In-equipped aircraft, and to other aviation service providers.

2.2.2 ADS-B Operating Frequencies. In the United States, the ADS-B system operates on two frequencies: 1090 or 978 megahertz (MHz). See Chapter 3, Figure 3-1, Automatic Dependent Surveillance-Broadcast Airspace Rule (14 CFR § 91.225) Diagram, for airspace and frequency requirements.

2.2.2.1 The 1090 MHz Frequency. The 1090 MHz frequency is associated with current Mode A, C, and S transponder operations. ADS-B information is included in Mode S transponders’ Extended Squitter (ES) transmit messages, and referred to as 1090ES in this AC.

2.2.2.2 The 978 MHz Frequency. ADS-B equipment operating on 978 MHz are referred to as Universal Access Transceivers (UAT) in this AC.

2.2.3 ADS-B Avionics Operating Modes. ADS-B avionics can have the ability to both transmit and receive information.

2.2.3.1 ADS-B Out. The transmission of ADS-B information from aircraft is known as ADS-B Out.

2.2.3.2 ADS-B In. The receipt of ADS-B information by an aircraft is known as ADS-B In.

Note: Since January 1, 2020, all aircraft operating within the airspace defined in 14 CFR § 91.225 are required to transmit the information defined in 14 CFR § 91.227. Refer to 14 CFR §§ 91.225 and 91.227 for more detailed information.

CHAPTER 2. OVERVIEW AND SYSTEM DESCRIPTION › 2.4 Use of ADS-B In Information for Traffic Situational Awareness.

2.3 ADS-B Broadcast Services. In the United States, ADS-B implementation includes four broadcast services: Automatic Dependent Surveillance-Rebroadcast (ADS-R), ADS-R Same Link Rebroadcast (ADS-R-SLR), TIS-B, and FIS-B. For a detailed explanation of these services, refer to the FAA Surveillance and Broadcast Services Description Document (SRT-047).

2.3.1 ADS-R. Because the ADS-B system operates on two separate frequencies (1090 MHz and 978 MHz), there is a need to translate, reformat, and rebroadcast the information from each frequency to enable aircraft receiving on the other frequency to process and use the other’s information. This process is referred to as ADS-R and occurs within an ADS-B ground station. An aircraft or vehicle that is ADS-B Out and is receiving ADS-R service is known as an ADS-R client. An ADS-B-equipped aircraft or vehicle on the opposite link of the ADS-R client that has its messages translated and transmitted by the ground system is known as an ADS-R target. See paragraph 2.3.5 for ADS-R client qualification criteria.

Note: Aircraft operating on the same ADS-B frequency exchange information directly and do not require ADS-R translation. Aircraft with ADS-B In capability on both UAT and 1090ES do not require ADS-R service.

2.3.2 TIS-B. TIS-B is the broadcast of transponder-based Mode C or Mode S traffic information derived from ATC surveillance systems. TIS-B provides ADS-B In-equipped aircraft with a more complete picture of surrounding traffic in situations where not all aircraft are equipped with ADS-B. An aircraft or vehicle that is ADS-B Out and is receiving TIS-B service is known as a TIS-B client. A non-ADS-B-equipped aircraft or vehicle that has its position transmitted in TIS-B reports is known as a TIS-B target. See paragraph 2.3.5 for TIS-B client qualification criteria.

2.3.3 FIS-B. FIS-B operates on UAT only and provides ADS-B In-equipped aircraft with a suite of advisory-only aeronautical and weather information products to enhance the user’s situational awareness. Additional information on FIS-B and the products available through the service are provided in the Aeronautical Information Manual (AIM) and AC 00-63, Use of Flight Deck Displays of Digital Weather and Aeronautical Information.

2.3.4 ADS-R SLR. ADS-R SLR uses ADS-R to rebroadcast ADS-B messages sent by aircraft on or near a runway; it is available at all airports with an FAA surface surveillance system. Airport structures can block reception of direct aircraft-to-aircraft ADS-B messages on an airport surface, impacting use of ADS-B In systems on an airport surface. This effect is mitigated by ADS-R SLR.

2.3.5 ADS-B Out Requirements for ADS-R and TIS-B. The FAA provides ADS-R and TIS-B services for equipment that meets performance requirements outlined in 14 CFR § 91.227 or complies with requirements specified in Technical Standard Order (TSO)-C199, Traffic Awareness Beacon System (TABS).

2.4 Use of ADS-B In Information for Traffic Situational Awareness. This paragraph provides guidance on the use of ADS-B In information for traffic situational awareness.

2.4 Use of ADS-B In Information for Traffic Situational Awareness. › 2.4.2 Operation.

See the appropriate appendices of this AC for guidance on the use of ADS-B In for the more advanced procedures, which may be performed if authorized. There is no specific authorization to use ADS-B In for traffic situational awareness. Installation of ADS-B In equipment is not required for compliance with 14 CFR § 91.225 or § 91.227. However, aircraft owners and operators who choose to voluntarily equip with ADS-B In avionics will achieve greater benefit from the technology through improved traffic situational awareness on the ground and in the air.

Note: This AC only addresses ADS-B In systems installed consistent with AC 20-172, Airworthiness Approval for ADS-B In Systems and Applications, and meeting TSO-C195b, Avionics Supporting Automatic Dependent Surveillance – Broadcast (ADS-B) Aircraft Surveillance Applications (ASA), or later revision.

2.4.1 ADS-B In Systems. Most ADS-B In systems will include a flight deck traffic display depicting the relative position and related information of ADS-B-equipped aircraft presented on a plan view. This traffic display is only one component of the input and output devices collectively known as a Cockpit Display of Traffic Information (CDTI). The traffic display may be on a dedicated display or integrated into and presented on an existing display (e.g., navigation display (ND) or multifunction display (MFD)). The terms traffic display and CDTI are used interchangeably when the meaning is clear in context. In many installations, a moving map depicting key surface elements of the airport may be displayed when on the ground or within a predefined altitude/distance from an airport while airborne.

Note: ADS-B Traffic Advisory System (ATAS) is an ADS-B In application intended specifically for General Aviation (GA) use that incorporates an audio traffic alerting capability.

2.4.2 Operation. The CDTI will display nearby ADS-B Out traffic and may also display TIS-B traffic and FIS-B information if UAT is equipped, depending on the installation and operating airspace. The display may have functionality to allow the pilot to select a target to obtain additional information that might not be automatically displayed, such as distance from own-ship and groundspeed (GS). The system will also provide range selection and declutter functionality. More advanced ADS-B In systems may also include certified functionality to perform ADS-B In procedures described in the appendices of this AC.

Note: For traffic situational awareness, pilots are encouraged to incorporate the display in their normal scan to aid in the early detection of nearby traffic when in visual conditions and to aid in understanding the flow and amount of nearby traffic when in instrument conditions. However, the traffic display is not intended to be used for self-separation or to deviate from an ATC clearance. Should questions arise about a potential conflict with traffic while on an instrument flight rules (IFR) clearance, the pilot should query ATC. Pilots are also cautioned to not allow the display to become a distraction from the primary task of flying the aircraft or scanning outside for traffic. Finally, pilots are cautioned against

2.4.3 Limitations. › 2.4.3.8 In ACAS-equipped aircraft, ADS-B In traffic display information…

unnecessarily communicating on the ATC frequency about traffic observed on the traffic display.

2.4.3 Limitations. Pilots should understand the proper use and limitations of their equipment and should adhere to the following:

2.4.3.1 Only use the traffic display to supplement what can be seen out the window (OTW), except when authorized to conduct ADS-B In operations described in the appendices of this AC. Pilots must always conduct OTW scans to see and avoid as required under 14 CFR § 91.113(b).

2.4.3.2 Unless specifically certified for the function, the traffic display is not intended for collision avoidance or self-separation.

2.4.3.3 Not all ground and airborne traffic will appear on the traffic display. The traffic display can only display properly equipped ADS-B Out traffic broadcasting on the received frequencies, and, depending on the operating location, ADS-R SLR, ADS-R, TIS-B, and/or Airborne Collision Avoidance System (ACAS) (if installed) traffic. Additionally, the completeness of the traffic situational awareness information is affected by range, signal quality, and proper installation and function of the ADS-B Out system on the traffic aircraft.

2.4.3.4 Unless initiated by the controller, pilots should typically not use the call sign or Aircraft Identification (ACID) of observed traffic in radio communications, as this could create confusion for both ATC and pilots monitoring the frequency.

2.4.3.5 In multipiloted aircraft, establish and comply with crew coordination procedures on the use of the CDTI and ADS-B In information to minimize heads-down time.

2.4.3.6 Use of the traffic display does not change pilot or controller responsibilities.

2.4.3.7 If at any time the presented information becomes unreliable, inoperative, or a distraction, disregard the information presented on the traffic display.

2.4.3.8 In ACAS-equipped aircraft, ADS-B In traffic display information does not change existing procedures for response to a traffic advisory (TA) and/or Resolution Advisory (RA).

3.1 U.S. ADS-B Airspace and Equipment Performance Requirements. Since… › 3.1.2 Outside Class A Airspace.

CHAPTER 3. OPERATIONAL CONSIDERATIONS

3.1 U.S. ADS-B Airspace and Equipment Performance Requirements. Since January 1, 2020, unless authorized by air traffic control (ATC), all aircraft operating in the airspace specified in 14 CFR § 91.225 must meet the equipment performance requirements defined in 14 CFR § 91.227. This chapter describes both the airspace and equipment performance requirements of 14 CFR §§ 91.225 and 91.227. Operators should consider the need to access ADS-B-required airspace and the performance requirements of that airspace when equipping for compliance with 14 CFR §§ 91.225 and 91.227.

3.1.1 Inside Class A Airspace. Operations in Class A airspace must:

1. Meet the equipment performance requirements in:

a. Technical Standard Order (TSO)-C166b, Extended Squitter Automatic Dependent

Surveillance - Broadcast (ADS-B) and Traffic Information Service - Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) (1090ES), and Section 2 of RTCA DO-260B, Minimum Operational Performance Standards for 1090 MHz Extended Squitter Automatic Dependent Surveillance - Broadcast (ADS-B) and Traffic Information Services - Broadcast (TIS-B) (as referenced in TSO-C166b); or

b. TSO-C166c and Section 2 of RTCA DO-260C as modified by RTCA DO-260C

Change 1 (as referenced in TSO-C166c).

2. Meet the requirements of 14 CFR § 91.227.

Note: Although TSO-C166b and later revisions incorporate standards for TIS-B equipment, TIS-B equipage (ADS-B In) is not required for compliance with 14 CFR §§ 91.225 and 91.227.

3.1.2 Outside Class A Airspace. Operations within airspace defined in 14 CFR § 91.225, but outside Class A airspace must:

1. Meet the requirements of 14 CFR § 91.227; and

2. Meet the performance requirements in:

a. TSO-C166b and Section 2 of RTCA DO-260B (as referenced in TSO-C166b);

b. TSO-C166c and Section 2 of RTCA DO-260C as modified by RTCA DO-260C

Change 1 (as referenced in TSO-C166c);

c. TSO-C154c, Universal Access Transceiver (UAT) Automatic Dependent

Surveillance-Broadcast (ADS-B) Equipment Operating on Frequency of 978 MHz, and Section 2 of RTCA DO-282B, Minimum Operational Performance Standards for Universal Access Transceiver (UAT) Automatic Dependent Surveillance - Broadcast (ADS-B) (as referenced in TSO-C154c); or

d. TSO-C154d and Section 2 of RTCA DO-282C (as referenced in TSO-C154d).

3.1 U.S. ADS-B Airspace and Equipment Performance Requirements. Since… › 3.1.4 Operation of Unmanned Aircraft. For unmanned aircraft:

3.1.3 Operation of Aircraft With Dual ADS-B Out Links. Operators of aircraft equipped with both 1090 Extended Squitter (ES) and UAT ADS-B systems should be aware that broadcasting only on 978 MHz (UAT) in Class A airspace is not sufficient to meet the requirements of 14 CFR § 91.225. Before operating in Class A airspace, operators of such aircraft should verify that their 1090ES equipment is broadcasting properly.

3.1.4 Operation of Unmanned Aircraft. For unmanned aircraft:

1. No person may operate an unmanned aircraft under a flight plan (FP) and in two-way communication with ATC unless:

a. That aircraft has equipment installed that meets the performance requirements in

TSO-C166b (including Section 2 of RTCA DO-260B, as referenced in TSO-C166b), TSO-C166c (including Section 2 of RTCA DO-260C as modified by RTCA DO-260C Change 1, as referenced in TSO-C166c), TSO-C154c (including Section 2 of RTCA DO-282B, as referenced in TSO-C154c), or TSO-C154d (including Section 2 of RTCA DO-282C, as referenced in TSO-C154d); and

b. The equipment meets the requirements of 14 CFR § 91.227.

2. No person may operate an unmanned aircraft under 14 CFR part 91 with ADS-B Out equipment in transmit mode unless:

a. The operation is conducted under an FP, and the person operating that unmanned

aircraft maintains two-way communication with ATC; or

b. The use of ADS-B Out is otherwise authorized by the Administrator.

Figure 3-1. Automatic Dependent Surveillance-Broadcast Airspace Rule

(14 CFR § 91.225) Diagram

CHAPTER 3. OPERATIONAL CONSIDERATIONS › 3.3 Traffic Awareness Beacon System (TABS).

3.2 Exceptions to Airspace Requirements. The requirements of 14 CFR § 91.225(b) do not apply to any aircraft that was not originally certified with an engine-driven electrical system or that has not subsequently been certified with such a system installed, including balloons and gliders. The FAA has previously determined that the same aircraft excluded from the transponder requirement are excluded from the ADS-B Out equipage. Accordingly, an aircraft that subsequently has been installed with batteries or an electric starter would not be required to equip for ADS-B Out. These aircraft may conduct operations without ADS-B Out in the airspace specified in 14 CFR § 91.225(d)(2) and (4). However, for other aircraft without ADS-B Out, 14 CFR § 91.225(g) requires ATC authorization prior to operation in ADS-B Out-required airspace.

3.3 Traffic Awareness Beacon System (TABS). Operators of aircraft exempt from carrying a transponder or ADS-B equipment may wish to consider installing a TABS transponder or a transponder with a TABS-compliant position source (refer to TSO-C199, Traffic Awareness Beacon System (TABS)). TABS transponders do not meet the transponder requirements defined in 14 CFR § 91.215, and TABS-compliant position sources do not meet the requirements defined in 14 CFR § 91.227. However, they will allow TABS-equipped aircraft to be electronically “visible” to aircraft equipped with Airborne Collision Avoidance Systems (ACAS), traffic advisory systems (TAS), and ADS-B In systems. TABS-equipped aircraft that are broadcasting an ADS-B In capability will also become TIS-B clients.

4.3 ADS-B Equipment Operations (U.S. Airspace). › 4.3.1 Transmit Requirements.

CHAPTER 4. OPERATING PROCEDURES

4.1 General Operating Procedures. This chapter describes the general procedures for ADS-B Out operations in accordance with 14 CFR §§ 91.225 and 91.227. All operators should use this information when planning and conducting operations requiring ADS-B Out performance.

4.2 Operator Familiarity of the Installed ADS-B System.

4.2.1 System Operation Familiarity. All operators should use the applicable Airplane Flight Manual (AFM), Aircraft/Airplane Flight Manual Supplement (AFMS), Rotorcraft Flight Manual (RFM), Rotorcraft Flight Manual Supplement (RFMS), pilot’s operating handbook (POH), or other required operating handbooks or manuals to become familiar with the proper operation of the installed ADS-B system and any procedures expected of the user for indications of reduced performance or failures within the system.

4.2.2 Understanding Failure Indicators Within the System. Because many ADS-B system installations are upgrades of transponders (Mode S), there are limited abilities to indicate ADS-B failures. Mode S transponders with ADS-B functionality may indicate a device failure (loss of transponder/ADS-B) and input failures (loss of position source, such as the Global Navigation Satellite System (GNSS)) with the same indicator light. Operators should refer to their AFM, AFMS, RFM, RFMS, POH, and other handbooks and manuals for information on the differences between device failures and function failures and the implications and procedures associated with each failure type. In particular, normal GNSS signal interference on the ground caused by nearby obstacles, such as a large hangar, may be incorrectly interpreted as a failure of the ADS-B system. Moving the aircraft clear of obstructions may be all that is needed to clear an indicated malfunction caused by GNSS multipath signals.

4.2.3 Transponder Operation and ADS-B Transmissions. For ADS-B system installations integrated within a transponder that share control features, operators should be aware that disabling the transponder will also disable ADS-B transmissions, as well as result in a loss of Secondary Surveillance Radar (SSR) services and Airborne Collision Avoidance System (ACAS)/ACAS II operation, if so equipped.

4.3 ADS-B Equipment Operations (U.S. Airspace).

4.3.1 Transmit Requirements. In accordance with 14 CFR § 91.225(f), each person operating an aircraft equipped with ADS-B Out must operate this equipment in the transmit mode at all times, unless authorized by the FAA or directed by air traffic control (ATC). This equipment operation requirement pertains to all phases of flight operation, including airport surface movement area operations. Pilots should select the transponder mode that enables the altitude reporting and ADS-B Out transmissions any time their aircraft is positioned on any portion of an airport movement area.

Note: Aircraft must comply with the appropriate Technical Standard Order (TSO) performance requirements when transmitting ADS-B data.

4.3.1.1 Departures. Select the transponder mode that allows altitude reporting and enable ADS-B Out during pushback or taxi-out from parking spot. Select traffic advisory (TA) or TA/Resolution Advisory (RA) (if equipped with ACAS) when taking the active runway.

4.3.2 Equipment Qualification Requirements. › 4.3.2.2 Special Light-Sport Category Aircraft (SLSA).

4.3.1.2 Arrivals. After clearing the active runway, if ACAS-equipped (TA or TA/RA), select the transponder to altitude reporting mode, and maintain ADS-B Out transmissions. Select “STBY” or “OFF” for the transponder and ADS-B only upon arriving at the aircraft’s parking spot or gate.

4.3.1.3 Formation Operations. ATC uses established transponder and ADS-B transmission procedures when participating in formation operations. Refer to the Aeronautical Information Manual (AIM), Paragraph 4-1-20, Transponder and ADS-B Out Operation, for specific procedures for both formation flights receiving ATC services, and visual flight rules (VFR) formation flights not receiving ATC services.

4.3.1.4 Inoperative ADS-B Out. For operations with inoperative ADS-B Out, comply with the requirements of 14 CFR § 91.213 as appropriate for your aircraft. If you intend to operate in airspace described in 14 CFR § 91.225, see paragraph 4.3.3 and comply with 14 CFR § 91.225(g)(1).

4.3.2 Equipment Qualification Requirements. In order to operate an aircraft in airspace defined in 14 CFR § 91.225, the installed ADS-B Out equipment, and its connected or internal position source, must meet the performance requirements of the applicable TSOs and meet the requirements of 14 CFR § 91.227. Since 14 CFR § 91.225 requires the equipment components to be installed, portable ADS-B Out equipment, including system components and antennas, do not comply with the rule. Operators should also note that FAA regulations require installed equipment to function as intended. Under 14 CFR part 21, installed equipment need not be manufactured under a TSO Authorization (TSOA), but must be approved or qualified according to the type of aircraft as follows:

4.3.2.1 Type-Certificated Aircraft. ADS-B Out systems and equipment (including the connected position source) installed or used in type-certificated aircraft must have a design approval issued under 14 CFR part 21 or must be installed by field approval, if appropriate. AC 20-165, Airworthiness Approval of Automatic Dependent Surveillance - Broadcast OUT Systems, provides guidance on installation of ADS-B Out systems. FAA Policy Memorandum, Installation Approval for ADS-B OUT Systems, dated March 2, 2016, provides information on how ADS-B systems may be installed by field approval.

4.3.2.2 Special Light-Sport Category Aircraft (SLSA). Equipment installed on SLSA must be installed in accordance with an applicable consensus standard and must be authorized by the aircraft’s manufacturer or a person acceptable to the FAA (refer to 14 CFR § 21.181). For equipment to be installed in SLSA, manufacturers should develop installation instructions to facilitate the

4.3.2 Equipment Qualification Requirements. › 4.3.2.4 All Aircraft—Importance of Proper Installation.

equipment’s installation in accordance with applicable consensus standards for SLSA.

4.3.2.3 Experimental Aircraft, Including Experimental Light-Sport Aircraft (ELSA).

4.3.2.3.1 For experimental category aircraft, including ELSA, there is no FAA approval required for the ADS-B Out system installation. However, to protect all users of the National Airspace System (NAS), it is essential for all aircraft, including experimental and ELSA, to install equipment that has been adequately designed and tested to meet the equipment’s intended functions of supporting safe ATC separation services and providing accurate traffic awareness to other aircraft. To meet this requirement, owners of these aircraft may elect to install equipment manufactured under a TSOA, in accordance with the installation instructions provided by the manufacturer. Alternatively, owners of these aircraft may elect to install equipment that are not approved under a TSOA. For non-TSOA equipment, the owner should obtain installation instructions that include a statement of compliance (SOC) from the applicable avionics manufacturer(s). To qualify non-TSOA equipment as compliant for operations in ADS-B airspace defined in 14 CFR § 91.225, the SOC should indicate that when installed in accordance with the installation instructions, the equipment complies with all requirements of 14 CFR § 91.227, and with the performance requirements of the appropriate TSO. While the SOC is important for showing compliance of the installation to 14 CFR § 91.225, it is critical to perform the installation correctly for the equipment to operate properly.

4.3.2.3.2 Owners of experimental aircraft should retain the installation instructions from the equipment supplier, including the SOC, in the aircraft records. The SOC documents the equipment’s compliance with the requirements of 14 CFR §§ 91.225 and 91.227, and retaining the installation instructions will assist in resolving in-service issues if necessary.

4.3.2.4 All Aircraft—Importance of Proper Installation. Experience with FAA compliance monitoring of ADS-B Out-equipped aircraft to date has revealed that many equipped aircraft have deficiencies with ADS-B Out system performance following initial installations. Many of these deficiencies have been traced to improper installation and incorrect system configuration. Therefore, the FAA considers it particularly important for equipment manufacturers to provide installation instructions that are as clear and easy to follow as possible and to revise these instructions when deficiencies in the instructions are discovered. Installers should adhere to the manufacturer’s installation instructions and employ practices that consistently result in ADS-B Out system installations that comply with 14 CFR § 91.227 equipment performance requirements.

4.3.2.5 All Aircraft—ADS-B Out Equipment Performance and FAA Monitoring. › 4.3.2.5.4 While the term NPE is generally used to describe aircraft…

4.3.2.5 All Aircraft—ADS-B Out Equipment Performance and FAA Monitoring.

4.3.2.5.1 The ADS-B Out rule does not impose additional continued/recurrent airworthiness inspection requirements for applicable equipment. Therefore, owners/operators of ADS-B Out-equipped aircraft should ensure continued compliance of applicable equipment performance requirements following initial installation or any subsequent alteration to the system.

Note: Transponder-based ADS-B Out systems (i.e., 1090ES) are still required to meet the requirements of 14 CFR § 91.413.

4.3.2.5.2 The FAA continuously monitors the equipment performance of all ADS-B Out-equipped aircraft operating in U.S. airspace for compliance of regulatory requirements specified in 14 CFR § 91.227. Applicable equipment performance monitoring is conducted by a tool known as the ADS-B Performance Monitor (APM).

4.3.2.5.3 The APM collects data transmitted by ADS-B Out-equipped aircraft monitored on the surface and airborne. The APM applies established compliance criteria to collected data for more than 40 individual equipment performance checks, assembles relevant information into a flight record, and identifies exceptions to applicable regulations to support various internal and external reporting requirements. Aircraft identified by the APM with exceptions are referred to as non-performing equipment (NPE).

4.3.2.5.4 While the term NPE is generally used to describe aircraft with ADS-B Out equipment performance exceptions, certain pilot actions can result in NPE conditions. Such pilot actions may include the following:

1. Movement of aircraft on the surface (under its own power) or while airborne with ADS-B Out equipment turned off;

2. Operating with a nonconforming or unauthorized local call sign or flight identification (FLT ID) code;

3. Operating with an FLT ID code that does not correspond to the code filed on an associated flight plan (FP) (as applicable);

4. Operating with barometric altitude reporting off (when not directed to do so by ATC);

5. Operating a Universal Access Transceiver (UAT) transponder-dependent device with the transponder turned off (no barometric altitude or Mode A code present in ADS-B messages); and

6. Operating ADS-B Out equipment in any manner contrary to applicable regulations.

4.3.2.6 Handling of Aircraft With NPE. › 4.3.2.6.3 In late 2017, the FAA published a notice to the Federal…

4.3.2.5.5 As discussed in paragraph 4.2, pilots should be familiar with the operation of ADS-B Out equipment, including any associated failure indications provided by the system. It is important for pilots to understand that most ADS-B failure indications are limited to system component failures; and indications associated with equipment performance required by regulation are not provided.

4.3.2.5.6 To enable public access to ADS-B equipment performance data needed for owners/operators to verify compliance with 14 CFR § 91.227 requirements, the FAA provides a free, web-based service called the Public ADS-B Performance Report (PAPR) at https://adsbperformance.faa.gov/PAPRReques t.aspx. Additional information on the PAPR service can be found at https://www.faa.gov/air_traffic/technology/equipadsb.

4.3.2.5.7 The FAA recommends that owners/operators of ADS-B Out-equipped aircraft verify equipment performance through frequent use of the PAPR request service, especially following initial equipment installation, modification, or maintenance of existing ADS-B Out systems (including component software updates/changes).

4.3.2.6 Handling of Aircraft With NPE.

4.3.2.6.1 When ADS-B Out equipment performance becomes deficient during flight, ATC may direct the pilot to discontinue ADS-B Out transmissions pursuant to 14 CFR § 91.225(f)(2). The pilot should comply with the procedures established for that aircraft or notify ATC if unable. If necessary, ATC may direct the aircraft to exit 14 CFR § 91.225 airspace.

4.3.2.6.2 FAA flight monitoring has shown that aircraft engaged in aerobatic and agricultural operations may fail to meet applicable equipment performance requirements due to maneuvering that exceeds the design limits of the installed GNSS equipment. Aircraft identified by the APM with exceptions to 14 CFR § 91.227 resulting from maneuvering characteristics of aerobatic and/or agricultural operations are not considered NPE by the FAA. When not actively engaged in aerobatics or agricultural operations (e.g., when transiting to and from applicable areas of operation), these aircraft are expected to meet ADS-B Out equipment performance requirements.

4.3.2.6.3 In late 2017, the FAA published a notice to the Federal Register (FR) announcing changes to ADS-B services, including the Traffic Information Service-Broadcast (TIS-B) (refer to 82 FR 60302, Docket Number FAA-2017-1194, Change to Automatic Dependent Surveillance Broadcast Services, at https://www.federalregister.gov). These changes included implementation of a filter within the FAA ATC automation system to prevent processing of data transmitted by certain NPE aircraft. Application of the filter is enabled by restricting use of the 24-bit International Civil Aviation Organization (ICAO) address (Mode S code) transmitted from NPE aircraft

4.3.2.6 Handling of Aircraft With NPE. › 4.3.2.6.7 In rare cases, it is necessary for the FAA to issue an…

and managed through a list referred to as the No Services Aircraft List (NSAL). NPE aircraft on the NSAL cannot be provided ATC services via the ADS-B data network and do not meet the equipment performance requirements necessary to qualify for TIS-B client services. Owners/operators of aircraft on the NSAL must seek authorization from ATC to operate in the airspace specified by 14 CFR § 91.225.

4.3.2.6.4 Prior to listing NPE aircraft on the NSAL, the FAA will provide written notification of relevant ADS-B equipment issues to the owner/operator at the address associated with the aircraft’s registry in an effort to coordinate NPE corrective action. In cases where the FAA makes notification of NPE to an owner/operator via an individual FAA letter of finding (LOF), the owner/operator has 45 days from the date of the LOF to respond to the FAA to establish a plan of corrective action for the NPE. All NPE aircraft are subject to being placed on the NSAL if contact is not established with the FAA to communicate a plan for corrective action within the 45-day period.

Note: NPE notifications mailed to unmonitored mailboxes may result in aircraft being listed to the NSAL (after 45 days) without owner/operator awareness. Owners/operators with addresses associated with an unmonitored mailbox (e.g., LLC or nonresident addresses) are advised to request a PAPR for awareness of ADS-B Out equipment performance and the NSAL status of their aircraft.

4.3.2.6.5 Additionally, the FAA has implemented a process to provide an automated report indicating potential NPE for aircraft operated by a specific certificate holder (CH). The report is called the Fleet Report Avionics Trend Analysis Tool (ATAT). In cases where the FAA makes notification of NPE (or potential NPE) via this report, the receiving CH, along with the FAA Certificate Management Team (CMT), should coordinate with the appropriate office within the FAA Flight Standards Aircraft Maintenance Division to discuss the identified potential NPE in the report, as necessary. This coordination should occur in a timely manner as much as practical. The 45-day period that is associated with the individual LOF sent to an aircraft owner/operator does not apply to those receiving the automated Fleet Report ATAT.

4.3.2.6.6 The operation of aircraft with certain NPE characteristics (e.g., erroneous position reports) present a significant safety hazard to surrounding airspace and ATC services. Hazardous NPE aircraft may require immediate placement on the NSAL to mitigate applicable safety risks prior to owner/operator notification.

4.3.2.6.7 In rare cases, it is necessary for the FAA to issue an Aircraft Condition Notice (FAA Form 8620-1) to prevent operation of aircraft with hazardous NPE characteristics.

4.3.4 Procedures for Requesting and Authorizing Deviations. › 4.3.4.1 Air Carriers Procedures.

4.3.2.6.8 Owners/operators receiving an NPE notification letter and/or Aircraft Condition Notice should follow the instructions provided in those documents and contact the handling aviation safety inspector (ASI) as soon as possible to coordinate required corrective action. Following NPE corrective action, a verification flight must be conducted pursuant to 14 CFR § 91.407(b), and the handling ASI should be notified, to validate equipment performance. When the handling ASI determines the NPE condition has been corrected, they will notify the owner/operator and, when applicable, initiate the process for removal of the aircraft from the NSAL.

Note: Once requested, removal of aircraft from the NSAL can take up to 30 days.

4.3.2.6.9 Aircraft on the NSAL are identified on the cover page of an applicable PAPR with the following language (in red font): Aircraft is on No Services List. This language is omitted from a PAPR associated with aircraft not currently on the NSAL. See paragraph 4.3.2.5.6 for information on obtaining a PAPR.

4.3.3 Operation of Aircraft With Inoperative ADS-B. Title 14 CFR § 91.225(g) permits ATC to authorize the operation of aircraft with inoperative ADS-B or that do not have ADS-B installed into airspace where it is required. Under 14 CFR § 91.225(g), operators must make requests for ATC-authorized deviations from the requirements in 14 CFR § 91.225 to the ATC facility that has jurisdiction over the concerned airspace or airport movement area within the time periods specified below:

1. For operation of an aircraft with inoperative ADS-B equipment to the airport of ultimate destination (including any intermediate stops) or to proceed to a place where suitable repairs can be made, or both, the request may be made at any time.

2. For operation of an aircraft that is not equipped with ADS-B, operators must make the request at least 1 hour before the proposed operation.

4.3.4 Procedures for Requesting and Authorizing Deviations. In order to standardize the process for requests and document authorized deviations, the FAA has established the following sets of procedures: one for air carrier operators and another for all others.

4.3.4.1 Air Carriers Procedures. For departures within 2 hours of the request, the air carrier should contact the FAA Joint Air Traffic Operations Command (JATOC) telephonically (540-422-HELP (4357)) for approval of the immediate operation. For departures that are more than 2 hours from the request, email the ADS-B Deviation Authorization Preflight Tool (ADAPT) Help Desk ([email protected]) and include the following information: aircraft registration number (and flight number(s)), proposed departure and destination airport(s), flight dates, number of operating days, planned date of repair, confirmation that the aircraft transponder is functioning, and air carrier email point of contact (POC). The JATOC will relay the approval or denial by email.

4.3.5 Operation of Aircraft Not Equipped With ADS-B. › 4.3.5.2 Note that the provision of air traffic services to a…

Note: To request an authorized deviation for inoperative ADS-B between the hours of 2201–0559 eastern time, make the request directly with the appropriate ATC facility, as directed by regulation (summarized in paragraph 4.3.3).

4.3.4.2 All Other Operators. All other operators are encouraged to use ADAPT to document your request and authorization (see paragraph 4.3.6). You may also request coordination through the departure airport ATC tower.

Note 1: Aircraft must have an operable transponder with Mode C altitude reporting capability to use ADAPT. If the failure results in the loss of all transponder functions, you must coordinate through the Air Traffic Control System Command Center (ATCSCC) or the local facility, as appropriate, or use your existing procedures for an inoperative transponder.

Note 2: All airborne failures will be handled by the FAA facility where the failure occurs. The FAA facility will coordinate through the ATCSCC if necessary, which will then coordinate with all FAA facilities along the remaining route of flight.

4.3.5 Operation of Aircraft Not Equipped With ADS-B. In April 2019, the FAA published a notice to the FR clarifying policy for authorizations to operators of aircraft not equipped with ADS-B (refer to 84 FR 12062, Docket Number FAA-2019-0239, Statement of Policy for Authorizations to Operators of Aircraft That Are Not Equipped With Automatic Dependent Surveillance-Broadcast (ADS-B) Out Equipment, at https://www.federalregister.gov). Operators are encouraged to review the notice, summarized below.

4.3.5.1 To operate in ADS-B airspace, an operator whose aircraft is not equipped with ADS-B Out equipment must obtain a preflight authorization in accordance with 14 CFR § 91.225(g). The operator has the responsibility to obtain a preflight authorization from ATC for all ADS-B Out airspace on the planned flightpath. For the reasons explained in the policy, however, the FAA will be very unlikely to issue routine and regular authorizations to scheduled operators seeking to operate nonequipped aircraft in rule airspace. Likewise, although unscheduled operators may request authorizations for airspace at capacity constrained airports as defined in the policy, issuance of an authorization may prove difficult to obtain.

4.3.5.2 Note that the provision of air traffic services to a non-ADS-B-equipped aircraft whose flight transits ADS-B Out airspace will not constitute authorization under 14 CFR § 91.225(g). Although ATC will be able to observe that an aircraft is not equipped with ADS-B Out equipment, ATC will not be responsible for determining whether nonequipped aircraft operating in the NAS are properly authorized to operate in ADS-B Out airspace. The provision of air traffic services is separate from and will not constitute an

4.4 Flight Plans (FP). › 4.4.2 ADS-B Capability Codes. The ADS-B capability codes are as follows:

authorization to deviate from the ADS-B Out equipage requirements while operating in that airspace. The nonequipped operator, as always, will have the responsibility to ensure compliance with the regulations, which includes obtaining a preflight authorization in accordance with 14 CFR § 91.225(g).

4.3.6 ADAPT. The FAA developed ADAPT, a web-based mechanism for requesting authorization in accordance with the regulation and this policy. You may access ADAPT at https://sapt.faa.gov. While ADAPT is intended primarily for requests to operate without ADS-B, you may also choose to use it as a means to request an authorization to operate with inoperative ADS-B. Refer to the ADAPT User Guide for additional information. Air carriers are not precluded from using ADAPT; however, there is no guarantee that an automatic authorized deviation will be issued.

4.4 Flight Plans (FP). The information to complete the ICAO FP continues to evolve with the introduction of Next Generation Air Transportation System (NextGen) equipment and capabilities. The information provided here represents just some of the ADS-B specific information elements. For the most current and complete instructions and descriptions of FP filing codes, refer to AIM, Paragraph 5-1-9, Single Flights Conducted With Both VFR and IFR Flight Plans, and the FAA Flight Planning Information web page at https://www. faa.gov/about/office_org/headquarters_offices/ato/service_units/air_traffic_services/fligh t_plan_filing.

4.4.1 ICAO FP Item 10, Equipment. When operating aircraft equipped with ADS-B you should indicate surveillance equipment in Item 10 of the ICAO FP (FAA Form 7233-4, Pre-Flight Pilot Checklist and International Flight Plan). In addition to the transponder codes (refer to AIM, paragraph 5-1-9), you should include an ADS-B capability code from the following list. Note that FAA automation does not process ADS-B reports on Very High Frequency (VHF) Digital Link Mode 4, so those codes are not listed here.

4.4.2 ADS-B Capability Codes. The ADS-B capability codes are as follows:

• B1: ADS-B with dedicated 1090-megahertz (MHz) ADS-B Out capability.

• B2: ADS-B with dedicated 1090 MHz ADS-B Out and In capability.

• U1: ADS-B Out capability using UAT.

• U2: ADS-B Out and In capability using UAT.

Note 1: Only include an ADS-B capability code when at least one serviceable ADS-B Out system is installed.

Note 2: Do not file an ADS-B code for “in” capability only. There is currently no way to indicate that an aircraft has “in” capability but no “out” capability. For aircraft with ADS-B “out” on one frequency and “in” on another, include only the ADS-B “out” code. (e.g., B1 or U1).

4.4 Flight Plans (FP). › 4.4.5 Privacy ICAO Address (PIA) Program.

4.4.3 ICAO FP Item 18, Other Information.

4.4.3.1 SUR/A2: If you file an ADS-B capability code of B1 or B2 in Item 10 and the ADS-B equipment complies with 14 CFR § 91.225, include the item “SUR/A2” in Item 18. This indicates the aircraft has 1090 MHz Extended Squitter (ES) ADS-B compliant with RTCA DO-260B, Minimum Operational Performance Standards for 1090 MHz Extended Squitter Automatic Dependent Surveillance - Broadcast (ADS-B) and Traffic Information Services - Broadcast (TIS-B), or RTCA DO-260C as modified by RTCA DO-260C Change 1.

4.4.3.2 SUR/A2: If you file an ADS-B capability code of U1 or U2 in Item 10 and the ADS-B equipment complies with 14 CFR § 91.225, include the item “SUR/A2” in Item 18. This indicates the aircraft has 978 MHz UAT ADS-B compliant with RTCA DO-282B, Minimum Operational Performance Standards for Universal Access Transceiver (UAT) Automatic Dependent Surveillance - Broadcast (ADS-B), or RTCA DO-282C.

Note: If the ADS-B capability filed in Item 10 is not compliant with 14 CFR § 91.225, do not include “SUR/” information in this FP field.

4.4.4 Anonymity Operations and VFR FPs. Title 14 CFR § 91.227 contains specific provisions allowing operators with TSO-C154c or TSO-C154d, Universal Access Transceiver (UAT) Automatic Dependent Surveillance - Broadcast (ADS-B) Equipment Operating on the Radio Frequency of 978 Megahertz (MHz), equipment to transmit a self-assigned (randomized) temporary 24-bit address and no Aircraft Identification (ACID). However, pursuant to the regulations (14 CFR § 91.227(d)(11)), the UAT self-assigned temporary 24-bit address feature may only be used when the operator “has not filed a flight plan” and “has not requested ATC services.” The FAA interprets the exceptions in 14 CFR § 91.227(d)(8) and (11) as applying to pilots who: (1) have not filed an instrument flight rules (IFR) FP; (2) have not requested ATC services, such as separation services or VFR flight following; and (3) are using a TSO-C154c or TSO-C154d self-assigned temporary 24-bit address. As a result, VFR pilots using the anonymity feature may file a VFR FP, which enables search-and-rescue capabilities, provided they do not request flight following.

Note: For any operation where ATC assigns you a discrete Mode A code, you are receiving ATC services.

4.4.5 Privacy ICAO Address (PIA) Program. The FAA acknowledges the desire of some operators to limit the availability of real-time ADS-B position and identification information for a specific aircraft. To address privacy concerns and to accommodate the needs of aircraft, participation will be subject to the following conditions and limitations:

• U.S. registered.

• 1090 MHz ADS-B equipped.

4.4.5 Privacy ICAO Address (PIA) Program. › 4.4.5.4 An aircraft operator may use the ICAO aircraft address…

• Using a third-party call sign.

• Flying in domestic U.S. airspace, as well as offshore within U.S.-controlled flight information regions (FIR).

4.4.5.1 The PIA program will enable interested aircraft owners to request an alternate, temporary ICAO aircraft address, which will not be assigned to any owner in the Civil Aviation Registry (CAR). This service will be available in two phases:

1. Phase 1: The application for PIA can be accessed on the FAA website at https://www.faa.gov/air_traffic/technology/equipadsb/privacy. This service will be operated, monitored, and maintained by the FAA.

2. Phase 2: The service will be transitioned to third-party service provider(s) who will operate, monitor, and maintain this program, which will continue to be available from the above website.

4.4.5.2 To maintain the safety and integrity of air traffic operations, the FAA monitors PIA use in the NAS. The following list includes improper uses of PIAs:

• Use of PIAs assigned to another aircraft.

• Use of unassigned PIAs.

• PIAs used for operations outside of U.S.-controlled FIRs.

• PIAs changed in flight.

• PIAs used with an underperforming ADS-B emitter.

• PIA used with a UAT or dual 1090/UAT emitter.

4.4.5.3 PIAs used by an aircraft other than the aircraft to which the address is assigned results in a violation of 14 CFR § 91.227 and notification to the FAA. Upon detection of improper PIA use, the aircraft owner/operator will be issued a warning that requires immediate action to remedy the issue before the next operation involving the assigned PIA. Failure to comply may result in the revocation of the PIA assignment. Upon revocation of the PIA assignment, the aircraft would be required to fly with its original ICAO aircraft address as found in the CAR, and failure to do so may result in regulatory enforcement action by the FAA and cessation of additional PIA assignments to that aircraft until the enforcement action is closed.

4.4.5.4 An aircraft operator may use the ICAO aircraft address originally assigned and recorded in the CAR at any time for operations, including any time while having an active PIA assignment. Use of the assigned ICAO aircraft address recorded in the CAR is required for all flights leaving U.S. sovereign airspace, and it may be used for any other flights at any time, as desired by the aircraft operator.

4.5.1 Flight Planning Requirements for Certain Operators. › 4.5.1.4 Satellite-Based Augmentation System (SBAS) receivers also use…

4.4.5.5 The FAA requires that the user submits documented validation that an ICAO aircraft address has been correctly installed into the aircraft’s ADS-B avionics after each change. Refer to the FAA PIA web page for complete program details.

4.5 Preflight Requirements (U.S. Airspace).

Note: The remainder of paragraph 4.5 describes additional preflight considerations that only apply to the operation of aircraft equipped with selective availability (SA) On position sources, as further described in paragraph 4.5.1.2.

4.5.1 Flight Planning Requirements for Certain Operators. Under 14 CFR § 91.103, pilots and operators must use all available information in planning their flight, to ensure that the performance requirements will be met for the duration of the flight. Variations in position source performance affect ADS-B Out in two specific broadcast elements required by 14 CFR § 91.227: Navigation Accuracy Category for Position (NACp) and Navigation Integrity Category (NIC). During certain Global Positioning System (GPS) constellation geometries, some position sources may produce values for NACp and NIC that are less than required by the rule.

4.5.1.1 Four different variants of GPS receivers are currently in use as a position source that can meet ADS-B Out rule performance requirements, to varying degrees, when adequate numbers of GPS satellites are in view. SA is a feature that deliberately degraded the GPS satellite signal, resulting in a less accurate reported position. SA was deactivated in 2000.

4.5.1.2 SA-On GPS receivers assume SA is still active (on), thereby unnecessarily inflating integrity and accuracy bounds of the positions that are no longer degraded by SA. Most GPS receivers that are only compliant with TSO-C129, Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS), are SA-On receivers.

4.5.1.3 SA-Aware GPS receivers are designed to recognize that SA is inactive and optimize the performance from GPS. GPS receivers that comply with the performance requirements of TSO-C196, Airborne Supplemental Navigation Sensors for Global Positioning System Equipment Using Aircraft-Based Augmentation, are SA-Aware receivers.

4.5.1.4 Satellite-Based Augmentation System (SBAS) receivers also use the additional signals from geostationary satellites specifically designed for aviation use, improving the quality and robustness of positioning performance. This difference in performance is most pronounced for very precise operations, such as localizer performance with vertical guidance (LPV) approaches, and for all operations when there are inoperative GPS satellites. GPS receivers complying with TSO-C145, Airborne Navigation Sensors Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS), or TSO-C146, Stand-Alone Airborne

4.5.2.1 Prediction Methods. › 4.5.2.1.2 Operators may use the FAA-provided preflight availability…

Navigation Equipment Using the Global Positioning System Augmented by the Satellite Based Augmentation System (SBAS), are SBAS receivers.

4.5.1.5 Aircraft-Based Augmentation System (ABAS) sensors tightly integrate GPS measurements with inertial reference/navigation sensor data, improving the quality and robustness of positioning performance. This difference in performance is most pronounced for lower level Required Navigation Performance (RNP) operations, such as Area Navigation (RNAV) approaches, and for all operations when there are inoperative GPS satellites.

Note 1: Some GPS receivers manufactured with a TSO-C129a approval are SA-Aware, and, therefore, have the same NACp and NIC availability as TSO-C196( )-approved equipment. Operators should check with their GPS receiver supplier to verify whether their installed TSO-C129( ) GPS receiver is SA-On or SA-Aware.

Note 2: The Wide Area Augmentation System (WAAS) is the designation of the SBAS available in North America and is the term often used when making reference to SBAS in the United States.

4.5.2 GPS Performance Prediction. For aircraft equipped with TSO-C129( ) GPS units to support ADS-B Out equipment, an NACp and NIC GPS service availability prediction should be performed for the intended route of flight (route and time) using available GPS satellite information and guidance published in this AC. It is not necessary for operators of aircraft equipped with the following receivers to conduct a preflight availability prediction: WAAS (TSO-C145 or TSO-C146), SA-Aware (TSO-C196), TSO-C129a receivers that are SA-Aware, or ABAS that include SA-Aware GPS receivers.

4.5.2.1 Prediction Methods. Operators may use any of the following preflight availability prediction methods.

4.5.2.1.1 Operators of large fleets of aircraft or users of flight planning programs may wish to use their own preflight availability verification tool. The operator is responsible for selecting a tool that accurately predicts the ADS-B position source performance for their aircraft. The tool needs to account for the GPS satellites that are in service at the time of the prediction, and may take into account unique characteristics of the GNSS receiver, aircraft integration, or installation, including performance better than required in FAA standards or use of inertial information integrated into the ADS-B Out position source. The FAA does not evaluate or approve a particular tool, but may evaluate the basis of the operator’s determination that the tool is appropriate to their aircraft, particularly if its use results in noncompliant flights in airspace where ADS-B Out is required.

4.5.2.1.2 Operators may use the FAA-provided preflight availability prediction tool, called the Service Availability Prediction Tool (SAPT) (https://sapt.faa.gov). Refer to the SAPT User Guide for specific instructions on its use.

4.5.2.1.3 Operators may use a third-party interface, incorporating FAA GPS performance prediction data without altering performance values, to predict NACp/NIC performance outages for the aircraft’s predicted flightpath and times.

4.5 Preflight Requirements (U.S. Airspace). › 4.5.3 Preflight Prediction Compliance.

4.5.2.2 Prediction Model Parameters. The operator should use a model appropriate to their equipment, including the type of GPS receiver and the demonstrated capability to track satellites at a given mask angle. When selecting a mask angle, the operator should consider the equipment qualification, installation in the aircraft, and the effects of normal maneuvering. Aircraft are typically qualified with a 5-degree mask angle, and operational experience has indicated that a 2-degree mask angle can be achieved by some equipment installations. If using the SAPT, each prediction is valid for the operation within 5 minutes of the plan time and 7.5 nautical miles (NM) of the route. The operator may wish to submit additional requests for predictions for varying times around the proposed departure time to ensure compliance at the actual departure time.

4.5.2.3 Flight Planning Guidance. Predictions should be conducted within 24 hours of departure and as close to departure time as feasible, but with sufficient time to replan the flight in the event a segment along the planned route is predicted to have insufficient GPS service availability. The prediction should be reevaluated prior to flight if new information (i.e., a Notice to Air Missions (NOTAM)) provides notice of an unscheduled GPS satellite outage. In the event of a predicted loss of performance for any part along the intended route in the airspace where ADS-B Out is required, the flight should be replanned so that ADS-B Out performance requirements specified in 14 CFR § 91.227 can be met.

4.5.3 Preflight Prediction Compliance. Operators need to perform an ADS-B Out preflight prediction only for the intended route of flight to the intended destination. For example, when departure and/or arrival alternate airports are required, no preflight prediction is necessary for these routes. However, if you become aware of a change that could result in degraded ADS-B Out performance, such as a satellite outage prior to receiving an ATC clearance for the intended route of flight, then you should conduct a subsequent preflight prediction for the planned flight. This will ensure that ADS-B Out performance is still predicted to comply with the performance requirements of 14 CFR § 91.227(c)(1)(i) and (iii). Once the pilot has received an ATC route clearance, there is no requirement to conduct a subsequent preflight prediction. Therefore, upon receiving a satisfactory preflight availability prediction and an ATC clearance for an intended route of flight, the operator will be deemed to have complied with the preflight availability prediction requirement and the performance requirements of 14 CFR § 91.227(c)(1)(i) and (iii). The FAA accepts that unanticipated changes in route of flight and environmental conditions may adversely affect ADS-B Out performance. ATC will continue to exercise its responsibility for the safe and efficient movement of air traffic, including the routing of traffic to meet those objectives. ADS-B preflight planning should include:

CHAPTER 4. OPERATING PROCEDURES › 4.6 Flightcrew Entry of Required ADS-B Data.

• Identification of flights or aircraft that require completion of a preflight prediction.

• Identification of the preflight prediction system (or systems) to be used.

• A means to document completion of a satisfactory prediction for each flight where a prediction is required.

• Retention of prediction completion documentation for a suitable period of time, such as 3 months.

4.5.4 GPS Interference With ADS-B Compliance. There may be times when the GPS position source cannot meet the required technical performance for compliance with 14 CFR § 91.227 due to planned GPS interference. In the event of a scheduled interference outage of GPS, the FAA will issue a NOTAM that identifies the airspace and time periods that may be affected by the interference. The FAA has determined that it would be impractical and not in the public interest to require operators to avoid the affected area based on the chance that an otherwise compliant flight could experience GPS interference. Accordingly, operators should proceed with their intended operation if the only impediment to their operation is possible planned GPS interference. An operator who is required to perform a preflight availability prediction for the intended route of flight is still required to obtain a satisfactory preflight availability prediction. When a NOTAM identifies the airspace and time periods that may be affected by GPS interference, an operator will not be required to alter their route of flight to avoid the area based solely on that NOTAM. If an operator encounters actual GPS interference during their flight that results in a degradation of ADS-B Out performance, provided the operator has taken the appropriate preflight actions, the FAA will not consider these events to constitute a violation, as such application of the regulation would impose standard of conduct wholly outside the operator’s control.

4.5.5 SAPT Outages. The FAA will issue a NOTAM in the event of a SAPT outage. Operators who use SAPT as their preflight prediction tool will not need to conduct a preflight prediction for the duration of the outage. Additionally, any FPs submitted to ATC with a proposed departure time within 90 minutes of SAPT return to service do not require a subsequent preflight analysis. When there is a SAPT outage and an operation falls below the performance requirements, provided the operator has taken the appropriate preflight actions with regard to relying upon SAPT, the FAA will not consider these events to constitute a violation, as such application of the regulation would impose standard of conduct wholly outside the operator’s control. For operators who have been notified by the FAA of consistent and repeated ADS-B Out performance issues, the FAA cautions that operating during a SAPT outage without first redressing the identified nonperformance issue will be considered a continuation of existing noncompliance of the performance requirements.

4.6 Flightcrew Entry of Required ADS-B Data. The operator should develop operational procedures to address flightcrew entry of the ADS-B message elements required in 14 CFR § 91.227 and as described in paragraphs 4.6.1 through 4.6.4. If the ADS-B avionics system design does not allow for a single point of entry for this information, the AFM, AFMS, RFM, RFMS, POH, or other required flight manual must address the

4.6.2 Aircraft’s FLT ID. › 4.6.2.3 In FAA ATC systems, if the FLT ID transmitted by the aircraft’s…

requirement to enter the information multiple times through the appropriate system’s interface and to ensure that conflicting ACID information is not transmitted to ATC.

4.6.1 Mode A Code.

4.6.1.1 ATC automation relies on the Mode A code to identify aircraft under radar surveillance and to correlate the displayed target to an FP. The Mode A code is one element of the transmitted ADS-B message set. Since SSR and ADS-B surveillance will overlap in much of the NAS, correlation of the Mode A code between the transponder and the ADS-B message is necessary to ensure that a single target is resolved and correlated to an FP route.

4.6.1.2 It is imperative that the ATC-assigned transponder code is identical to the one in the ADS-B Out message. Refer to AC 20-165 for more information.

Note: Transmission of conflicting transponder and ADS-B Mode A codes will result in erroneous traffic conflict alerts within the ATC automation system.

4.6.2 Aircraft’s FLT ID.

4.6.2.1 An aircraft’s FLT ID is transmitted by the ADS-B Out avionics. Per 14 CFR § 91.227(d)(8), the FLT ID must be identical to the “Aircraft Identification” as entered in Item 7 of FAA Form 7233-4 and Item 2 of FAA Form 7233-1, Flight Plan, which limit it to a maximum of seven alphanumeric characters. It is also referred to as a call sign. The FLT ID is typically entered by the flightcrew during preflight through either a flight management system (FMS) interface (control display unit (CDU)) or transponder control panel. The FLT ID for General Aviation (GA) aircraft is typically the aircraft’s registration number. The aircraft owner can preset the FLT ID to the aircraft’s registration number (e.g., N235RA), since it is a fixed value, or the pilot can enter it into the ADS-B Out system prior to flight, provided the ADS-B avionics have this capability. It is important to know that the FLT ID should be input into the ADS-B system exactly as filed in Item 2 of FAA Form 7233-1 or Item 7 of FAA Form 7233-4. No additional characters should be used to fill all available fields.

4.6.2.2 Some ATC systems use transmitted FLT IDs to uniquely identify each aircraft within a given airspace and correlate them with a filed FP for the provision of surveillance and separation services. If the FLT ID is not entered correctly, ATC automation systems may not associate surveillance tracks for the aircraft to its filed FP. Therefore, air traffic services may be delayed or unavailable until this is corrected. Consequently, it is imperative that flightcrews and GA pilots ensure the FLT ID entry correctly matches the ACID annotated in the filed ATC FP prior to departure.

4.6.2.3 In FAA ATC systems, if the FLT ID transmitted by the aircraft’s ADS-B system does not exactly match the FLT ID on the FP, a call sign mismatch

4.6.2 Aircraft’s FLT ID. › 4.6.2.5 Aircraft owners/operators are encouraged to periodically verify…

(CSMM) occurs. When a CSMM occurs and the ATC functionality is enabled, the controller is alerted and may take action, resulting in a flight delay. Furthermore, ATC may elect to advise the Flight Standards Service (FS) of the event and the potential violation of 14 CFR § 91.227(d)(8). The specific wording of this regulation has caused misunderstanding from numerous operators and airmen who believe it is acceptable to have a different FLT ID on the FP [ABC1234] from the FLT ID [N12345] transmitted by ADS-B. In an August 3, 2017, legal interpretation, the FAA Office of the Chief Counsel found that the intent of 14 CFR § 91.227(d)(8) is to require that the FLT ID as entered on the FP must exactly match the ADS-B-transmitted FLT ID. See Table 4-1, Aircraft Identification Transmission Examples, for examples.

Table 4-1. Aircraft Identification Transmission Examples

Flight Plan Aircraft ID Correct ADS-B Transmission Incorrect ADS-B Transmission

AAL5688 AAL5688 AAL-5688 SWA2155 SWA2155 2155 UAL21 UAL21 UAL0021 DAL9450 DAL9450 N561DL ASH5861 ASH5861 ASH5872 N350QS N350QS EJA350 FDY1055 FDY1055 VFR N777JK N777JK N-777JK N123DJ N123DJ NGF123 CGABC CGABC C-GABC VHXYZ VHXYZ VH-XYZ N100PH N100PH N1OOPH

4.6.2.4 GA pilots occasionally have the opportunity to use an FLT ID provided by a charity or other organization instead of using their N-number. In this situation, the GA pilot may only use the organization’s FLT ID for the flight, provided they change the FLT ID transmitted by the ADS-B Out avionics. If the ADS-B equipment does not allow the FLT ID to be changed or the pilot is unsure of how it is accomplished, the pilot should not use the organization’s FLT ID. In this case, in order to ensure compliance with 14 CFR § 91.227(d)(8), the pilot should use the aircraft registration number as the FLT ID.

4.6.2.5 Aircraft owners/operators are encouraged to periodically verify that their ADS-B is broadcasting the correct FLT ID. This is particularly true after any maintenance has been performed on the aircraft, even if not directly associated with avionics. The free FAA PAPR (described in paragraph 4.3.2.5.6) is an excellent tool to verify the output of ADS-B parameters, including FLT ID.

4.6 Flightcrew Entry of Required ADS-B Data. › 4.6.4 Transponder IDENT Function.

4.6.3 Emergency Status.

4.6.3.1 This ADS-B message element and transponder code alerts ATC that the aircraft is experiencing emergency conditions and indicates the type of emergency. The appropriate Mode A code should be entered into the transponder (e.g., 7500, 7600, or 7700). The ICAO Annex 10, Aeronautical Telecommunications, Volume IV, Surveillance and Collision Avoidance Systems, emergency codes (general emergency, no communications, and unlawful interference) are required by 14 CFR § 91.227.

4.6.3.2 ADS-B systems integrated within a transponder will automatically set the applicable emergency status when code 7500, 7600, or 7700 is entered into the transponder. Transponders compliant with RTCA DO-181F, Minimum Operational Performance Standards for Air Traffic Control Radar Beacon System/Mode Select (ATCRBS/Mode S) Airborne Equipment, will also automatically set the applicable emergency status when code 7400 is entered into the transponder.

4.6.4 Transponder IDENT Function. The AFM or POH will provide specific instructions on how the IDENT feature will be activated in specific installations, including any installations with multiple IDENT features.

1/14/25 AC 90-114C Appendix A

APPENDIX A. ADS-B IN-TRAIL PROCEDURE

A.1 Purpose. This appendix provides a description of the ADS-B-enabled In-Trail Procedure

A.3 ITP Terminology. › A.3.1 Closing Groundspeed (GS) Differential. The difference between the…

(ITP) and guidance to operators seeking FAA authorization to conduct ITP operations.

A.2 Background. The ITP is designed primarily for use in nonradar oceanic airspace to

enable appropriately equipped ADS-B In aircraft to perform flight level (FL) changes previously unavailable with procedural separation minima applied. The improved traffic information available to ADS-B In-equipped aircraft allows ITP maneuvers to occur safely with reduced separation minima applied. ITP enables flightcrews to execute FL changes to improve ride comfort, avoid weather, or obtain more favorable winds to improve fuel economy and arrival times.

A.2.1 ITP Scenario. Figure A-1, Reduction of Aircraft Separation Minima With In-Trail

Procedure, illustrates a basic ITP scenario. The ITP aircraft (blue) wishes to climb from FL340 to 360 between two reference aircraft (red) where procedural separation minima is applied. Using onboard ADS-B In and ITP equipment, the ITP aircraft can determine if the necessary criteria can be met and, if so, request air traffic control (ATC) approval to execute the desired FL change using reduced separation minima between the two reference aircraft.

A.2.2 ATC Responsibility. ATC maintains separation responsibility throughout the ITP

maneuver, and resumes the appropriate separation minima at its completion. ATC will apply the reduced ITP separation only between a qualified ITP aircraft and no more than two reference aircraft for the duration of the maneuver. The ITP maneuver can be performed with reference aircraft that do not have ADS-B In equipment. To enable an ITP maneuver, it is necessary for the reference aircraft to transmit an ADS-B Out signal of sufficient quality.

Figure A-1. Reduction of Aircraft Separation Minima With In-Trail Procedure

A.3 ITP Terminology.

A.3.1 Closing Groundspeed (GS) Differential. The difference between the ITP aircraft’s GS

and a reference aircraft’s GS that results in a reduction of the ITP distance.

1/14/25 AC 90-114C Appendix A

A.3.2 Closing Mach Speed Differential. The difference in Mach speed between the ITP aircraft

A.3 ITP Terminology. › A.3.7 Reference Aircraft. Aircraft (no more than two) transmitting…

and the reference aircraft that results in a reduction of the ITP distance.

A.3.3 ITP Aircraft. An aircraft operated by a flightcrew authorized to conduct an ITP.

A.3.4 ITP Criteria. A set of conditions to be satisfied prior to initiating or executing an ITP

clearance that ensures the safety of the procedure.

A.3.5 ITP Distance. The distance between the ITP aircraft and reference aircraft as defined by

the difference in distance to an aircraft calculated common point along a projection of each aircraft’s track in front of or behind the aircraft, as appropriate. (See Figure A-2, In-Trail Procedure Distances Illustrated.) For the case where aircraft are on parallel tracks, the ITP distance is measured along the track of one of the aircraft using its calculated position and the point abeam the calculated position of the other aircraft. This measurement technique is similar to the method described in International Civil Aviation Organization (ICAO) Doc 4444, Procedures for Air Navigation Services—Air Traffic Management, Section 5.4.2.9, Performance-Based Longitudinal Separation Minima.

A.3.6 ITP Equipment. The onboard avionics that support an ITP.

A.3.7 Reference Aircraft. Aircraft (no more than two) transmitting valid ADS-B data that meet

specified criteria and are referenced as part of an ITP clearance request to ATC.

1/14/25 AC 90-114C Appendix A

Figure A-2. In-Trail Procedure Distances Illustrated

Appendix A. ADS-B IN-TRAIL PROCEDURE › A.4 ITP Concept. The ITP concept is based on the aircraft satisfying…

A.4 ITP Concept. The ITP concept is based on the aircraft satisfying specific initial

conditions and the flightcrew promptly and correctly executing the requested procedure once approved. The initial conditions are the ITP speed/distance criteria, the relative altitude criteria, the similar track criteria, and the closing Mach differential, as well as the accuracy and integrity of the ADS-B data transmitted from participating aircraft. (See Table A-1, In-Trail Procedure Initiation/Maneuver Criteria (Reference RTCA DO-312 Supplement).) The safety of the procedure depends upon the ITP aircraft maintaining

A.4 ITP Concept. The ITP concept is based on the aircraft satisfying… › A.4.4 Mach Differential. In order to ensure an acceptable closure…

1/14/25 AC 90-114C Appendix A

constant Mach and climb or descend at a minimum of 300 feet per minute (fpm) during the maneuver. With these criteria, an ITP aircraft should never come closer than the 10-nautical-mile (NM) separation minimum to a reference aircraft while passing through their altitude(s).

A.4.1 ITP Distance and GS Differential Criteria. The initial distance criteria values, 15 NM and

20 NM, were selected so that when an FL change at 300 fpm and constant Mach number is maintained with the respective maximum 20- or 30-knot closing GS differential, the distance between the aircraft should not become less than the ITP minimum separation of 10 NM.

A.4.2 Relative Altitude Criteria. The design of the procedure is such that the reference aircraft

may not be more than 2,000 feet above or below the ITP aircraft.

A.4.3 Similar Track Criteria. Application of the ITP is limited to geometries where the ITP

aircraft and any reference aircraft are on similar tracks. Similar tracks are defined here as less than 45 degrees from one another. See Figure A-3.

Figure A-3. Similar Track

A.4.4 Mach Differential. In order to ensure an acceptable closure throughout the ITP maneuver,

the controller will not issue an ITP clearance if the closing Mach differential is greater than 0.06 Mach. This Mach differential check accounts for potentially unsafe closure rates due to abnormal or adverse wind gradient conditions at the intermediate altitudes. The Mach number check may be achieved by:

1. Using the cruise Mach numbers of the ITP and reference aircraft where the Mach number technique is being used;

2. Requesting Mach numbers from the ITP and reference aircraft; or

3. Any other methodology determined appropriate and acceptable by the regulatory authority and the air navigation service provider (ANSP).

A.5 ITP Description. To properly conduct an ITP, a qualified flightcrew… › A.5.2 Flightcrew Requests ITP. If the criteria are satisfied, the…

1/14/25 AC 90-114C Appendix A

A.4.5 ADS-B Data Quality Criteria. The ITP avionics only accept ADS-B Out aircraft

broadcasting data of sufficient quality for use as reference aircraft for ITP. The ITP avionics only allow ITP when own-ship data quality is sufficient to ensure safe separation. The data quality criteria are:

1. Position accuracy for ITP and reference aircraft—ITP and reference aircraft data with horizontal position accuracies of at least 0.5 NM (95 percent);

2. Position integrity for ITP and reference aircraft—ITP and reference aircraft data with horizontal position integrity bounds of 1.0 NM at 1×10E-05; and

3. Velocity accuracy for ITP and reference aircraft—ITP and reference aircraft data with horizontal velocity accuracies of at least 10 meters/second (m/s) (19.4 kts), 95 percent.

A.5 ITP Description. To properly conduct an ITP, a qualified flightcrew uses ADS-B In

avionics specifically certified to assist in verifying the initial conditions and a graphical display to monitor the relative position(s) of nearby aircraft. The procedure can only be conducted in airspace with appropriately trained ATC personnel, ITP-compatible automation, and approved ITP separation minima available. The following are the steps necessary to conduct an ITP:

A.5.1 Flightcrew Verifies Initial Criteria. Using approved avionics, the ITP flightcrew verifies

that their own-ship and the reference aircraft meet initial qualifying criteria. The onboard ITP avionics indicate to the flightcrew whether all initiation criteria are satisfied.

A.5.2 Flightcrew Requests ITP. If the criteria are satisfied, the flightcrew requests the ITP

clearance using the appropriate phraseology. Direct Controller Pilot Communication (DCPC) ensures unambiguous communication of the ITP request and ATC clearance. Currently, only Controller-Pilot Data Link Communication (CPDLC) is being used in locations where ITP is approved. Preformatted messages for requesting and approving ITP have been developed; however, not all aircraft have implemented them. In aircraft that do not have preformatted messages, flightcrews use standardized free text messages as described in Table A-2, Flightcrew Standardized Free Text Controller-Pilot Data Link Communication Message Set for In-Trail Procedure, and Table A-3, Controller Free Text Controller-Pilot Data Link Communication Message Set for In-Trail Procedure, until further notice. It is essential that the correct message elements be included in the correct format to allow the controller or automation system to properly evaluate the request. Improperly formatted or incomplete requests may be denied.

Note: ATC will not issue an ITP clearance to any aircraft unless that aircraft has initiated a proper request.

1/14/25 AC 90-114C Appendix A

A.5.3 Controller Issues Clearance. Upon receipt of an ITP request, the controller:

1. Confirms the ITP aircraft and the reference aircraft are on the same track.

A.5 ITP Description. To properly conduct an ITP, a qualified flightcrew… › A.5.5 Flightcrew Executes ITP. If the criteria are still met, the…

a. Same-track criteria are not the same as the similar-track criteria, which are

checked by the ITP aircraft flightcrew.

b. Same-track includes the concept of similar-track (i.e., ITP aircraft and reference

aircraft are traveling in the same direction with less than a 45-degree relative track angle between the aircraft), but also includes a check on whether or not the lateral protection areas overlap (e.g., lateral separation cannot be applied). This check can only be done by the controller who knows what separation standard is being applied between the aircraft.

2. Confirms that no more than two reference aircraft have been identified in the request and are identified correctly; that is, that the Aircraft Identification (ACID) of each reference aircraft in the ITP request exactly matches the corresponding aircraft’s filed flight plan (FP).

3. Ensures both the ITP aircraft and reference aircraft are not maneuvering and not expected to maneuver during the ITP.

Note: A change of course (only) to remain on the same route would not be considered a maneuver, provided the course change is less than 45 degrees and the aircraft remain in a same track configuration.

4. Verifies that the closing Mach differential is no greater than 0.06 Mach.

5. Verifies that there are no conflicts at the requested altitude.

6. If appropriate, issues an ITP clearance.

A.5.4 Flightcrew Reassesses Criteria. Upon receiving the ITP clearance, the flightcrew

confirms that all criteria are still satisfied. If the criteria are not satisfied or there has been a loss of traffic information, the flightcrew immediately rejects the ATC clearance and terminates the maneuver. Additionally, if the FL, reference aircraft, or type of maneuver (ITP versus standard FL change) does not exactly match their request or if the flightcrew receives an ITP clearance without requesting one, they will not perform the maneuver and should verify with ATC to confirm the clearance.

A.5.5 Flightcrew Executes ITP. If the criteria are still met, the flightcrew accepts the clearance

and begins the requested climb or descent without delay. While executing the maneuver, the flightcrew is expected to maintain their flight-planned route, assigned Mach number (or current Mach, if none is assigned), and minimum Vertical Speed (VS) of 300 fpm and ensure they execute only the maneuver for which they have been cleared. The maneuver is complete once the flightcrew reports to ATC that they have reached the new FL.

Note: Once the ITP maneuver has been initiated, it should be completed, and the aircraft not returned to the initial altitude. Should reference aircraft data be lost or ITP display fail during the maneuver, the flightcrew should continue the maneuver to the assigned altitude using the appropriate Mach number and

A.5 ITP Description. To properly conduct an ITP, a qualified flightcrew… › A.5.7 Contingency Procedures. The ITP maneuver has been extensively…

1/14/25 AC 90-114C Appendix A

300 fpm minimum VS. Upon completion of the maneuver, notify ATC of the ITP data loss.

A.5.6 Approved ITP Variations. An ITP can be conducted with a maximum of two reference

aircraft. The procedure design does not allow the reference aircraft to be more than 2,000 feet of altitude above or below the ITP aircraft, but there is no limit on the amount of altitude change the ITP aircraft may request. The reference aircraft both may be behind or ahead of the ITP aircraft or one may be ahead and one behind. Figure A-4 depicts the approved ITP variations.

Figure A-4. In-Trail Procedure Climb/Descent Variations

A.5.7 Contingency Procedures. The ITP maneuver has been extensively tested both in flight

and in computer simulations with consideration given to a variety of environmental and aircraft performance factors. A temporary breach of the 10 NM ITP distance does not constitute an inherently unsafe procedure and should not be the sole factor when considering abandoning the procedure. No new contingency procedures are prescribed for ITP. If, in the pilot’s judgment, the ITP maneuver (i.e., reaching the newly assigned altitude) cannot be successfully completed once the climb or descent has been initiated, they will:

1. Contact ATC and request an alternative clearance as soon as practicable given flightcrew workload and flight conditions.

2. Inform ATC of any action the flightcrew is taking or requesting. Because of the many variables, the CPDLC message should be in the “free text” format.

3. Comply with regional contingency procedures appropriate to the circumstances, or as listed in ICAO Doc 4444, Section 15.2, Special Procedures for In-Flight Contingencies in Oceanic Airspace.

A.6 Authorization to Conduct ITP. FAA authorization is required for all… › A.6.1 Initial Request for Authorization. U.S. aircraft operators…

1/14/25 AC 90-114C Appendix A

A.5.8 ITP Distance. Except when one aircraft is directly in trail of another, the ITP distance is

not the same as the direct line distance between those two aircraft. (See paragraph A.3, ITP Terminology, for the exact description and Figure A-2 for examples.) Since the ITP software is designed to calculate and display ITP distance information, extensive training on the subject is not necessary. However, it is important to emphasize that range and ITP distance are different. Consequently, a lack of understanding could lead the flightcrew to misidentify the correct reference aircraft when requesting an ITP clearance. Training should include examples of the various ITP distance geometries depicted in Figure A-2.

A.5.8.1 Lateral Traffic Filters. Some ITP avionics incorporate a lateral traffic filter. The function of the traffic filter is to eliminate any targets beyond a predetermined lateral distance of own-ship’s track from consideration as a potential reference aircraft. This is intended to prevent the flightcrew from misidentifying incorrect reference aircraft during their ITP request. The filter is most useful when in an organized track environment or where traffic may be on a parallel user-preferred route. Incorrect use may result in denied ITP requests. Training should include recommended technique for its use.

A.5.8.2 ITP Initiation Criteria. Traffic displayed as an ADS-B In target might not be presented as a valid ITP reference aircraft because it does not meet one or more ITP initiation criteria. Some of the criteria, such as position accuracy, are not displayed to the flightcrew. Training should include a discussion of the initiation criteria, which criteria are known to the flightcrew, and examples of when a displayed ADS-B In target is not an eligible ITP reference aircraft. See Table A-1 for ITP initiation criteria.

A.6 Authorization to Conduct ITP. FAA authorization is required for all U.S. aircraft

operators to conduct ITP operations using ADS-B In (14 CFR § 119.49(a)(5)). This appendix provides guidance to operators on the process for requesting issuance of this authorization, including guidance on the documentation that should be submitted.

Note 1: For FAA authorization, refer to FAA Order 8900.1, Volume 3, Chapter 18, Section 3, Operations Specification (OpSpec)/Management Specification (MSpec)/Letter of Authorization (LOA) A354, Automatic Dependent Surveillance-Broadcast (ADS-B) In-Trail Procedure (ITP).

Note 2: Operators may already hold other ADS-B In authorizations. There is no need to submit documentation for an ITP authorization if that documentation has already been submitted for previous ADS-B In authorizations. The ITP application may include references to those duplicate documents instead.

A.6.1 Initial Request for Authorization. U.S. aircraft operators seeking to conduct ITP should

first contact their assigned FAA office to indicate their intent. At the time of the operator’s initial request, the FAA will provide the operator with an ITP Application Checklist, which should be completed with attached supporting documents.

A.6.2 Documentation to Submit With Formal Proposal. › A.6.2.4 Operational Procedures. As applicable, company manuals should…

1/14/25 AC 90-114C Appendix A

A.6.2 Documentation to Submit With Formal Proposal.

A.6.2.1 Documentation Guidance. The following section provides general guidance on the documentation required for submission of a formal ITP proposal. At the discretion of the operator’s assigned principal inspector (PI), additional information may be required based on any unique aspects of their specific operation. The operator must submit a letter of request for issuance of authorization to the assigned PI. The letter of request should include the following information:

• Type of aircraft (make, model, and series (M/M/S)).

• ADS-B equipment complies with Technical Standard Order (TSO)-C195b, Avionics Supporting Automatic Dependent Surveillance – Broadcast (ADS-B) Aircraft Surveillance Applications (ASA), or later revision, or as approved for ITP by the Administrator.

• Installation has been completed following guidance in AC 20-172, Airworthiness Approval for ADS-B In Systems and Applications, or other acceptable means.

• Manufacturer’s name of the ADS-B In software.

• Proposed region(s) of operation (not applicable to 14 CFR part 91 operations).

Note: The guidance contained in paragraph A.6.2 will also be annotated on the ITP Using ADS-B In Application Checklist provided to the operator by the applicable FAA office.

A.6.2.2 Airplane Flight Manual (AFM) Compliance Documentation. Operators submit documentation that demonstrates that their aircraft have an ADS-B In system that meets the performance standards of TSO-C195b or later revision, or as approved for ITP by the Administrator.

A.6.2.3 Proposed Operations Area. Authorizations to conduct ITP are limited to specific regions of the world where the ANSP offers ITP and those procedures are determined to be acceptable to the Administrator. Routes or airspace where ITP may be authorized will be published in Aeronautical Information Publications (AIP). Include in your request a description, by flight information region (FIR) and ANSP, of the operational areas where you propose to conduct ITP. If the operator holds an OpSpec/MSpec B050, Authorized Areas of En Route Operations, Limitations, and Provisions, authorization, submit a draft OpSpec/MSpec B050 that includes the operational areas where you propose to conduct ITP, including applicable notes.

A.6.2.4 Operational Procedures. As applicable, company manuals should address any ITP-specific guidance from the Air Traffic Service Provider (ATSP) of the proposed region(s) of operation.

A.6.2 Documentation to Submit With Formal Proposal. › A.6.2.8 Pilot Training. Submit applicable portions of proposed…

1/14/25 AC 90-114C Appendix A

A.6.2.5 Operation Manuals and Checklists. The certificate holder (CH)/operator/program manager (as applicable) should submit information (e.g., Airplane Operations Manual (AOM) bulletin or equivalent) to the flightcrews describing ADS-B, to include:

• ITP system description;

• Normal procedures;

• En route procedures using ITP;

• Communications; and

• Non-normal or contingency procedures.

A.6.2.6 Maintenance. See Appendix C, ADS-B In Operations—Aircraft Qualification and Maintenance, for applicable maintenance guidance.

A.6.2.7 Revision of Minimum Equipment List (MEL). See Appendix C for guidance on the necessary MEL documents to be submitted for authorization of ITP.

A.6.2.8 Pilot Training. Submit applicable portions of proposed ITP-specific pilot training material and include a description of the methods used to conduct, evaluate, and manage the training. The following contains the recommended information to be included in pilot training material:

1. General understanding of ADS-B In operations (i.e., technology, capabilities, and limitations).

2. ITP system operation, including:

• Normal procedures;

• Non-normal and/or contingency procedures;

• ITP flight planning considerations;

• ITP dispatch considerations (as applicable);

• MEL considerations (as applicable);

• ITP terminology, including proper formulation of a CPDLC ITP request/clearance; and

• ITP equipment limitations.

3. Explanation of ITP distance as distinct from aircraft range, using select scenario-based examples (see Figure A-2 for ITP distance geometries):

• ITP directly in trail of a reference aircraft;

• ITP aircraft on a crossing track of reference aircraft—diverging;

A.6.2 Documentation to Submit With Formal Proposal. › A.6.2.9 Dispatch/Flight Follower Training. Submit applicable portions…

1/14/25 AC 90-114C Appendix A

• ITP aircraft on a crossing track of reference aircraft—converging; and

• ITP aircraft on a parallel track of reference aircraft.

A.6.2.9 Dispatch/Flight Follower Training. Submit applicable portions of proposed ITP-specific dispatch/flight planning training material, to include any appropriate updates to the dispatch operations manual, or equivalent, as well as a description of the methods used to conduct, evaluate, and manage training. The following contains the recommended information to be included in dispatch/flight planning training material:

1. General understanding of ADS-B In operations;

2. Dispatch of aircraft with the ITP system unserviceable;

3. How flight planning codes are affected with ADS-B unserviceable;

4. Flight planning, fuel loading, and route change procedures associated with ITP operations;

5. Equipment needed to conduct ITP; and

6. Approved ITP routes and airspace.

Note: Dispatch/flight follower training is not required for 14 CFR part 91 operations. However, as the pilot is responsible for flight planning, the pilot should consider these items prior to flight.

1/14/25 AC 90-114C Appendix A

Table A-1. In-Trail Procedure Initiation/Maneuver Criteria

(Reference RTCA DO-312 Supplement)

In-Trail Procedure (ITP) Speed/Distance Criteria

ITP Distance ≥ 15 nautical miles (NM) and Closing Groundspeed (GS) Differential ≤ 20 knots (kts) ITP Distance ≥ 20 NM and Closing GS Differential ≤ 30 kts

Relative Altitude Criteria Difference in altitude between ITP and Reference Aircraft is less than or equal to 2,000 feet

Similar Track Criteria Difference in track angles between ITP and Reference Aircraft is less than ±45 degrees

Position Accuracy for ITP and Reference Aircraft

ITP and Reference Aircraft data with horizontal position accuracies of at least 0.5 NM (95%)

Position Integrity for ITP and Reference Aircraft

ITP and Reference Aircraft data with horizontal position integrity bounds of 1.0 NM at 1×10E-05

Velocity Accuracy for ITP and Reference Aircraft

ITP and Reference Aircraft data with horizontal velocity accuracies of at least 10 meters/second (m/s) (19.4 kts), 95%

Closing Mach Differential (Air Traffic Control (ATC) Crosscheck)

Closing Mach Differential is less than or equal to 0.06 Mach

1/14/25 AC 90-114C Appendix A

Table A-2. Flightcrew Standardized Free Text Controller-Pilot Data Link Communication

To request an ITP climb or descent, the flightcrew will send a… › Example of ITP request message

Message Set for In-Trail Procedure

In-Trail Procedure (ITP) Type (number and relative position of

reference aircraft)

FREE TEXT Message Element Content

1 reference aircraft (ahead) “ITP [Distance] BEHIND [Aircraft flight identification (FLT ID)]”

1 reference aircraft (behind) “ITP [Distance] AHEAD OF [Aircraft FLT ID]”

2 reference aircraft (both ahead) “ITP [Distance] BEHIND [Aircraft FLT ID] AND [Distance] BEHIND [Aircraft FLT ID]”

2 reference aircraft (both behind) “ITP [Distance] AHEAD OF [Aircraft FLT ID] AND [Distance] AHEAD OF [Aircraft FLT ID]”

2 reference aircraft (one ahead and one behind)

“ITP [Distance] BEHIND [Aircraft FLT ID] AND [Distance] AHEAD OF [Aircraft FLT ID]”

To request an ITP climb or descent, the flightcrew will send a Controller-Pilot Data Link Communication (CPDLC) REQUEST CLIMB TO [altitude] or REQUEST DESCENT TO [altitude] message, as applicable, with the following verbiage added to FREE TEXT as listed in Table A-2:

Example of ITP request message: REQUEST CLIMB TO FL360 ITP 25 NM BEHIND SIA228 AND 21 NM AHEAD OF AFR008.

Continue reading ↓ 120 of 220 passages shown