Radar Vectors
Advisory Circular Cancelled Issued Aug 14, 2014 AAS-100 113 pages Copy saved Nov 18, 2026

AC 150/5335-5C Standardized Method of Reporting Airport Pavement Strength - PCN

This AC provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength. Includes instructions for using the COMFAA program to calculate ACN values to determine PCN. Also provides guidance for reporting changes to airport data that is generally published on Federal Aviation Administration (FAA) Form 5010, Airport Master Record, particularly those data elements associated with Gross Weight (Data Elements 35 through 38) and Pavement Classification Number (Data Element 39). Access COMFAA and related Support Spreadsheet on our Airport Design Software page.

This document is no longer current. Cancelled by 150/5335-5D. Check the official source before relying on it.

Official source ↗ Open PDF

U.S. Department of Transportation Federal Aviation Administration

Advisory Circular

Subject: Standardized Method of Reporting Airport Pavement Strength - PCN

Date: 8/14/2014 Initiated By: AAS-100

AC No: 150/5335-5C

1 Purpose. This advisory circular (AC) provides guidance for—

 Using the standardized International Civil Aviation Organization (ICAO) method to

report airport runway, taxiway, and apron pavement strength. ICAO requires member states to report aerodrome-related aeronautical data, including pavement strength. The standardized method, known as the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, has been developed and adopted as an international standard and has facilitated the exchange of pavement strength rating information.

 The AC provides guidance for use of the standardized method of reporting

pavement strength, which applies only to pavements with bearing strengths of 12,500 pounds (5 700 kg) or greater. The method of reporting pavement strength for pavements of less than 12,500 pounds (5 700 kg) bearing strength remains unchanged.

 Reporting changes to airport data that is generally published on Federal Aviation

Administration (FAA) Form 5010, Airport Master Record. The data elements associated with Gross Weight (Data Elements 35 through 38) and Pavement Classification Number (Data Element 39) are affected.

2 Cancellation. This AC cancels AC 150/5335-5B, Standardized Method of Reporting Airport Pavement Strength – PCN, dated August 26, 2011.

3 Application. The FAA recommends the guidelines and specifications in this AC for reporting airport pavement strength using the standardized method. Use of this AC is mandatory for all projects funded with Federal grant monies through the Airport Improvement Program (AIP) or with revenue from the Passenger Facility Charge (PFC) Program. See Grant

08/14/14 AC 150/5335-5C

ii

Assurance No. 34, “Policies, Standards, and Specifications,” and PFC Assurance No. 9, “Standards and Specifications.”

4 Effective Date.

 The FAA recommends the guidelines and specifications in this AC for reporting

airport pavement strength using the standardized method for all paved runways, taxiways, and aprons at all airports.

 One year after the implementation of this AC, the FAA requires all public-use paved

runways at all Part 14 CFR 139 certificated airports be assigned gross weight and PCN data.

 Upon completion of projects funded with Federal grant monies through the Airport

Improvement Program (AIP) or with revenue from the Passenger Facility Charge (PFC) program, the airport will update Form 5010 data elements associated with Gross Weight and Pavement Classification Number.

5 Principal Changes. The AC includes the following principal changes:

 Updates the Effective Date paragraph above for public-use paved runways at

nonprimary commercial service airports serving air carrier aircraft. Clarifies that upon completing paving projects that receive AIP or PFC funds, the airport will update the 5010 form.

 Updates the Application paragraph above to clarify that this AC applies to all

runways that have or will receive AIP or PFC funding.

 Clarifies in Chapter 3 that COMFAA calculates ACN using ICAO procedures but

calculates PCN using the procedures in this AC.

 Clarifies Using Aircraft Method to Determine PCN in paragraph 4.3.

 Clarifies the subgrade support category requirement in paragraph 4.4, Technical

Evaluation Method to Determine PCN.

 Adds a note to Table A-1, Standard P/TC Ratio Summary.

 Updates Appendix C and particularly Section C.6, Technical Evaluation Examples

for Flexible Pavements, and Section C.7, Technical Evaluation Examples for Rigid Pavements, with easier to follow examples and to comply with the current version of COMFAA (updated in 2012), 2012), the software program used for airport pavement thickness and strength evaluations, and the new COMFAA support spreadsheet (dated 11/21/2012).

 Updates Appendix D to conform to the current version of COMFAA.

 Makes editorial corrections and clarifications throughout, including adopting a new

paragraph numbering system.

08/14/14 AC 150/5335-5C

iii

6 Related Reading Material. The publications listed in Appendix G provide further information on the development and use of the ACN-PCN method.

Michael J. O’Donnell Director, Office of Airport Safety and Standards

08/14/14 AC 150/5335-5C

iv

Page Intentionally Blank

08/14/14 AC 150/5335-5C

CONTENTS

Paragraph Page

v

CHAPTER 1. INTRODUCTION … 1-1

1.1 Background … 1-1

1.2 Development of a Standardized Method … 1-1

1.3 Application … 1-1

1.4 Limitations of the ACN-PCN System … 1-2

CHAPTER 2. DETERMINATION OF AIRCRAFT CLASSIFICATION NUMBER … 2-1

2.1 Determination of the ACN … 2-1

2.2 Subgrade Category … 2-1

2.3 Operational Frequency … 2-1

2.4 Rigid Pavement ACN … 2-2

2.5 Flexible Pavement ACN … 2-2

2.6 ACN Calculation … 2-2

2.7 Variables Involved in Determination of ACN Values … 2-2

CHAPTER 3. DETERMINATION OF ACN-PCN VALUES USING COMFAA … 3-1

3.1 Availability of COMFAA Software Application … 3-1

3.2 Origin of the COMFAA Program … 3-1

3.3 COMFAA Program … 3-1

3.4 Internal Aircraft Library … 3-2

3.5 External Aircraft Library … 3-2

3.6 Using the COMFAA Program … 3-3

CHAPTER 4. DETERMINATION OF PCN NUMERICAL VALUE … 4-1

4.1 PCN Concept … 4-1

4.2 Determination of Numerical PCN Value … 4-1

4.3 Using Aircraft Method to Determine PCN … 4-1

4.4 Technical Evaluation Method to Determine PCN … 4-3

4.5 Limitations of the PCN … 4-5

4.6 Reporting the PCN … 4-5

APPENDIX A. EQUIVALENT TRAFFIC … A-1

APPENDIX B. TECHNICAL EVALUATION METHOD—EVALUATION

PAVEMENT PROPERTIES DETERMINATION … B-1

08/14/14 AC 150/5335-5C

CONTENTS (CONTINUED)

Paragraph Page

vi

APPENDIX C. PCN DETERMINATION EXAMPLES … C-1

APPENDIX D. PAVEMENT OVERLOAD EVALUATION BY THE ACN-PCN

SYSTEM … D-1

APPENDIX E. REPORTING CHANGES TO CERTAIN AIRPORT RUNWAY

DATA ELEMENTS … E-1

APPENDIX F. MAXIMUM AIRCRAFT GROSS WEIGHT TABLES FOR FAA

FORM 5010 REPORTING BASED ON PCN DETERMINATION … F-1

APPENDIX G. RELATED READING MATERIAL … F-6

LIST OF FIGURES

Figure 3-1. Computational Modes of the COMFAA Program … 3-4 Figure 3-2. Operation of the COMFAA Program in ACN Mode … 3-5 Figure 3-3. Operation of the COMFAA Program in PCN Batch Mode … 3-6 Figure 4-1. Operation of COMFAA ACN Only Program, Version in Batch Mode … 4-2 Figure 4-2. COMFAA Program, ACN Only Version in Batch Mode … 4-3 Figure A-1. Traffic Load Distribution Patterns … A-2 Figure B-1. Flexible Pavement Stabilized Base Layer(s) Equivalency Discussion (FAA

CBR method) … B-5 Figure B-2. Flexible Pavement Stabilized Base Layer(s) Equivalency Discussion

(Continued) (FAA CBR method) … B-6 Figure B-3. Rigid Pavement Stabilized Subbase Layer(s) Discussion (FAA Westergaard

method) … B-7 Figure B-4. Rigid Pavement Stabilized Subbase Layer(s) Discussion (Continued) (FAA

Westergaard method) … B-8 Figure B-5. Subbase Layer Effect on Subgrade Support, k, for Rigid Pavement (FAA

Westergaard method) … B-9 Figure B-6. Stabilized Subbase Layer Effect on Subgrade Support, k, for Rigid Pavement

Figure 3-1: picture of page 6Figure 3-1 · page 6
Picture of the page from the copy saved here

(FAA Westergaard method) … B-10 Figure B-7. Flexible Pavement quivalency to Rigid Pavement (FAA Westergaard method) ...B-11 Figure C-1. Example of COMFAA ACN Batch Results … C-2 Figure C-2. Flexible Layer Equivalency Spreadsheet to Support COMFAA … C-6 Figure C-3. Rigid Layer Equivalency Spreadsheet to Support COMFAA … C-7 Figure C-4. Screen Shot of PCN Worksheet in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Flexible Example 1 … C-12 Figure C-5. Detailed COMFAA Batch PCN Output – Flexible Example 1 … C-13 Figure C-6. Detailed COMFAA Batch PCN Output – Flexible Example 2 … C-16

08/14/14 AC 150/5335-5C

CONTENTS (CONTINUED)

Paragraph Page

vii

Figure C-7. Detailed COMFAA Batch PCN Output – Flexible Example 2, Computed Using

the Traffic Mix from Example 1 and Modified P/TC Ratio … C-18 Figure C-8. Detailed COMFAA Batch PCN Output – Flexible Example 3 … C-20 Figure C-9. Screen Shot of Flexible PCN Tab in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Flexible Example 4. The structure is the same as Example 1, but with a 2-inch HMA overlay, for a total P-401 thickness of 7 inches … C-21 Figure C-10. Detailed COMFAA Batch PCN Output – Flexible Example 4 (unadjusted) … C-22 Figure C-11. Detailed COMFAA Batch PCN Output – Flexible Example 4 (with

adjustment to P/TC ratio to force Total CDF = 0.15) … C-24 Figure C-12. Screen Sot of Rigid PCN Tab in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Rigid Example 1 … C-29 Figure C-13. Screen Shot of COMFAA Main Screen Showing the Required Inputs for

Rigid Example 1 … C-30 Figure C-14. Detailed COMFAA Batch PCN Output – Rigid Example 1 … C-31 Figure C-15. Screen Shot of Rigid PCN Tab in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Rigid Example 2 … C-34 Figure C-16. Detailed COMFAA Batch PCN Output – Rigid Example 2 … C-35 Figure C-17. Detailed COMFAA Batch PCN Output – Rigid Example 3 … C-38 Figure C-18. Screen Shot of Rigid PCN Tab in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Rigid Example 4 … C-40 Figure C-19. Detailed COMFAA Batch PCN Output – Rigid Example 4 (unadjusted) … C-41 Figure C-20. Detailed COMFAA Batch PCN Output – Rigid Example 4 (with adjustment

to P/TC ratio to force Total CDF = 0.15) … C-43 Figure D-1. CDF-PCN Results for the B-747-100 – Flexible Pavement Overload Option

One … D-3 Figure D-2. COMFAA Batch ACN Results – Flexible Pavement Overload Option One … D-3 Figure D-3. COMFAA Batch PCN Results – Flexible Pavement Overload Option One … D-4 Figure D-4. COMFAA PCN Results – Flexible Pavement Overload Option Two … D-4 Figure D-5. CDF-PCN Results – Flexible Pavement Overload Option Three … D-5 Figure D-6. CDF-PCN Results for the B-747-400 – Rigid Pavement Overload Option One .... D-6 Figure D-7. COMFAA Batch ACN Results – Rigid Pavement Overload Option One … D-6 Figure D-8. COMFAA PCN Results – Rigid Pavement Overload Option One … D-7 Figure D-9. COMFAA PCN Results –Rigid Pavement Overload Option Two … D-7 Figure D-10. COMFAA PCN Results – Rigid Pavement Overload Option Three … D-8

LIST OF TABLES

Table 2-1. Standard Subgrade Support Conditions for Rigid Pavement ACN Calculation … 2-1

Table 2-2. Standard Subgrade Support Conditions for Flexible Pavement ACN Calculation .... 2-1

08/14/14 AC 150/5335-5C

CONTENTS (CONTINUED)

Paragraph Page

viii

Table 4-1. Pavement Codes for Reporting PCN … 4-5

Table 4-2. Tire Pressure Codes for Reporting PCN … 4-7

Table A-1. Standard P/TC Ratio Summary (see Note) … A-3

Table B-1. FAA Flexible Pavement Layer Equivalency Factor Range … B-2

Table B-2. FAA Rigid Pavement Subbase Effect on Foundation k Value … B-3

Table C-1. Using Aircraft and Traffic for a Flexible Pavement … C-4

Table C-2. Using Aircraft and Traffic for a Rigid Pavement … C-5

Table C-3. Excerpt from COMFAA PCN Batch Results File for Flexible Pavement … C-8

Table C-4. Conversion to Equivalent Pavement Structure in Flexible Example 1 … C-12

Table C-5. Input Traffic Data for Rigid Example 1 … C-15

Table C-6. Input Traffic Data for Rigid Example 1 … C-27

Table C-7. Conversion to Equivalent Pavement Structure in Rigid Example 1 … C-28

Table C-8. Input Traffic Data for Rigid Example 4 … C-39

Table E-1. Flexible ACN Data Used to Establish Allowable Gross Weight … E-3

Table E-2. Rigid ACN Data Used to Establish Allowable Gross Weight … E-4

Table E-3. Excerpt From Listing of Maximum Gross Weight Data … E-5

Table F-1. Subgrade Strength Category A … F-1

Table F-2. Subgrade Strength Category B … F-2

Table F-3. Subgrade Strength Category C … F-4

Table F-4. Subgrade Strength Category D … F-5

CHAPTER 1. Introduction › 1.3 Application.

08/14/14 AC 150/5335-5C

CHAPTER 1. INTRODUCTION

1.1 Background. The United States is a contracting state of the International Civil Aviation Organization (ICAO) and, under 47 USC §40105(b), will act consistently with the obligations of the United States Government under an international agreement. Annex 14 to the Convention of International Civil Aviation, Aerodromes, contains a standard that requires member states to publish information on the strengths of all public airport pavements in its own Aeronautical Information Publication. The FAA reports pavement strength information to the National Airspace System Resources (NASR) database and publishes pavement strength information in the Airport Master Record (Form 5010) and the Airport/Facility Directory (AFD).

1.2 Development of a Standardized Method. In 1977, ICAO established a Study Group to develop a single international method of reporting pavement strengths. The study group developed, and ICAO adopted, the Aircraft Classification Number - Pavement Classification Number (ACN-PCN) method. Using this method, it is possible to express the effect of an individual aircraft on different pavements with a single unique number that varies according to aircraft weight and configuration (e.g. tire pressure, gear geometry, etc.), pavement type, and subgrade strength. This number is the Aircraft Classification Number (ACN). Conversely, the load-carrying capacity of a pavement can be expressed by a single unique number, without specifying a particular aircraft or detailed information about the pavement structure. This number is the Pavement Classification Number (PCN).

1.2.1 Definition of ACN. ACN is a number that expresses the relative effect of an aircraft at a given configuration on a pavement structure for a specified standard subgrade strength.

1.2.2 Definition of PCN. PCN is a number that expresses the load-carrying capacity of a pavement for unrestricted operations.

1.2.3 System Methodology. The ACN-PCN system is structured so a pavement with a particular PCN value can support an aircraft that has an ACN value equal to or less than the pavement’s PCN value. This is possible because ACN and PCN values are computed using the same technical basis.

1.3 Application. The use of the standardized method of reporting pavement strength applies only to pavements with bearing strengths of 12,500 pounds (5 700 kg) or greater. The method of reporting pavement strength for pavements of less than 12,500 pounds (5 700 kg) bearing strength remains unchanged.

CHAPTER 1. Introduction › 1.4 Limitations of the ACN-PCN System.

08/14/14 AC 150/5335-5C

1.4 Limitations of the ACN-PCN System. The ACN-PCN system is only intended as a method that airport operators can use to evaluate acceptable operations of aircraft. It is not intended as a pavement design or pavement evaluation procedure, nor does it restrict the methodology used to design or evaluate a pavement structure.

CHAPTER 2. Determination of Aircraft Classification Number › 2.3 Operational Frequency.

08/14/14 AC 150/5335-5C

CHAPTER 2. DETERMINATION OF AIRCRAFT CLASSIFICATION NUMBER

2.1 Determination of the ACN. The aircraft manufacturer provides the official computation of an ACN value. Computation of the ACN requires detailed information on the operational characteristics of the aircraft, such as maximum aft center of gravity, maximum ramp weight, wheel spacing, tire pressure, and other factors.

2.2 Subgrade Category. The ACN-PCN method adopts four standard levels of subgrade strength for rigid pavements and four levels of subgrade strength for flexible pavements. These standard support conditions are used to represent a range of subgrade conditions as shown in Tables 2-1 and 2-2.

Table 2-1. Standard Subgrade Support Conditions for Rigid Pavement ACN Calculation

Subgrade

Strength Category

Subgrade Support

k-Value pci (MN/m3)

Represents pci (MN/m3)

Code Designation

High 552.6 (150) k ≥ 442 (≥120) A

Medium 294.7 (80) 221<k<442 (60<k<120) B

Low 147.4 (40) 92<k≤221 (25<k≤60) C

Ultra Low 73.7 (20) k≤92 (≤25) D

Table 2-2. Standard Subgrade Support Conditions for Flexible Pavement ACN Calculation

Subgrade

Strength Category

Subgrade Support

CBR-Value Represents Code Designation

High 15 CBR ≥ 13 A

Medium 10 8<CBR<13 B

Low 6 4<CBR≤8 C

Ultra Low 3 CBR≤4 D

2.3 Operational Frequency. Operational frequency is defined in terms of coverages that represent a full-load application on a point in the pavement. Coverages must not be confused with other common terminology used to reference movement of aircraft. As an aircraft moves along a pavement section it seldom travels in a perfectly straight path or along the exact

CHAPTER 2. Determination of Aircraft Classification Number › 2.7 Variables Involved in Determination of ACN Values.

08/14/14 AC 150/5335-5C

same path as before. This movement is known as aircraft wander and is assumed to be modeled by a statistically normal distribution. As the aircraft moves along a taxiway or runway, it may take several trips or passes along the pavement for a specific point on the pavement to receive a full-load application. It is easy to observe the number of passes an aircraft may make on a given pavement, but the number of coverages must be mathematically derived based upon the established pass-to-coverage ratio for each aircraft.

2.4 Rigid Pavement ACN. For rigid pavements, the aircraft landing gear flotation requirements are determined by the Westergaard solution for a loaded elastic plate on a Winkler foundation (interior load case), assuming a concrete working stress of 399 psi (2.75 MPa).

2.5 Flexible Pavement ACN. For flexible pavements, aircraft landing gear flotation requirements are determined by the California Bearing Ratio (CBR) method for each subgrade support category. The CBR method employs a Boussinesq solution for stresses and displacements in a homogeneous, isotropic elastic half-space.

2.6 ACN Calculation. Using the parameters defined for each type of pavement section, a mathematically derived single wheel load is calculated to define the landing gear/pavement interaction. The derived single wheel load implies equal stress to the pavement structure and eliminates the need to specify pavement thickness for comparative purposes. This is achieved by equating the thickness derived for a given aircraft landing gear to the thickness derived for a single wheel load at a standard tire pressure of 181 psi (1.25 MPa). The ACN is defined as two times the derived single wheel load (expressed in thousands of kilograms).

2.7 Variables Involved in Determination of ACN Values. Because aircraft can be operated at various weight and center of gravity combinations, ICAO adopted standard operating conditions for determining ACN values. The ACN is to be determined at the weight and center of gravity combination that creates the maximum ACN value. Tire pressures are assumed to be those recommended by the manufacturer for the noted conditions. Aircraft manufacturers publish maximum weight and center of gravity information in their Aircraft Characteristics for Airport Planning (ACAP) manuals. To standardize the ACN calculation and to remove operational frequency from the relative rating scale, the ACN-PCN method specifies that ACN values be determined at a frequency of 10,000 coverages.

3.3 COMFAA Program. › 3.3.1 ACN Computation Mode.

08/14/14 AC 150/5335-5C

CHAPTER 3. DETERMINATION OF ACN-PCN VALUES USING COMFAA

3.1 Availability of COMFAA Software Application. To facilitate the use of the ACN-PCN system, the FAA developed a software application that calculates ACN values using the procedures and conditions specified by ICAO and can be used to determine PCN values following the procedures in this AC. The software is called COMFAA and may be downloaded along with its source code and supporting documentation from the FAA website.1 The program is useful for determining an ACN value under various conditions; however, official ACN values are provided by the aircraft manufacturer.

3.2 Origin of the COMFAA Program. Appendix 2 of the ICAO Aerodrome Design Manual, Part 3, Pavements, Second Edition, provides procedures for determining the Aircraft Classification Number (ACN). The appendix provides program code for two FORTRAN software applications capable of calculating the ACN for various aircraft on rigid and flexible pavement systems. The computer program listings in Appendix 2 of the ICAO manual were optically scanned and the FORTRAN code translated into Visual Basic 6.0 for incorporation into COMFAA.

3.3 COMFAA Program. The COMFAA software is a general purpose program that operates in two computational modes: ACN Computation Mode and Pavement Thickness Mode.

3.3.1 ACN Computation Mode.

 Calculates the ACN number for aircraft on flexible pavements.

 Calculates the ACN number for aircraft on rigid pavements.

 Calculates flexible pavement thickness based on the ICAO procedure (CBR

method) for default values of CBR (15, 10, 6, and 3).

 Calculates rigid pavement slab thickness based on the ICAO procedures (Portland

Cement Association method, interior load case) for default values of k (552.6, 294.7, 147.4, and 73.7 lb/in3 [150, 80, 40, and 20 MN/m3]).

Note: Thickness calculation in the ACN mode is for specific conditions identified by ICAO for determination of ACN and not intended to be used to design a new pavement. For flexible pavements, a standard tire pressure of 181 psi (1.25 MPa) and 10,000 coverages is specified. For rigid pavements, an allowable stress level of 399 psi is identified by ICAO. The thickness calculated in ACN mode has meaning for determining allowable pavement loading only for the specific conditions identified by ICAO. (Appendix C has more details.)

1 See http://www.faa.gov/airports/engineering/design_software/. This software is in the public domain.

3.5 External Aircraft Library. › 3.5.2 When saving an aircraft from the internal library to the external…

08/14/14 AC 150/5335-5C

3.3.2 Pavement Thickness Mode.

 Calculates total flexible pavement thickness based on the FAA CBR method

specified in AC 150/5320-62, Airport Pavement Design and Evaluation, for CBR values and coverage levels specified by the user.

 Calculates rigid pavement slab thickness based on the FAA Westergaard method

(edge load analysis) specified in AC 150/5320-6 for k values and coverage levels specified by the user.

Note: The pavement thickness requirements associated with the ACN-PCN procedures are based upon historical procedures identified in previous versions of AC 150/5320-6. The FAA has replaced these procedures for pavement design with new procedures.

3.4 Internal Aircraft Library. COMFAA contains an internal library of aircraft covering most large commercial and U.S. military aircraft currently in operation. The internal library is based on aircraft information provided directly by aircraft manufacturers or obtained from ACAP Manuals. The default characteristics of aircraft in the internal library represent the ICAO standard conditions for calculation of ACN. These characteristics include center of gravity at the maximum aft position for each aircraft in the ACN mode. Changes to characteristics of internal library aircraft are not permanent unless the internal library aircraft is added to an external library.

3.5 External Aircraft Library.

3.5.1 COMFAA allows for an external aircraft library where characteristics of the aircraft can be changed and additional aircraft added as desired. Functions permit users to modify the characteristics of an aircraft and save the modified aircraft in the external library. There are no safeguards in the COMFAA program to assure that aircraft parameters in the external library are feasible or appropriate. The user is responsible for assuring all data is correct.

3.5.2 When saving an aircraft from the internal library to the external library, the COMFAA program will calculate the tire contact area based upon the gross load, maximum aft center of gravity, and tire pressure. This value is recorded in the external library and is used for calculating the pass-to-coverage (P/C) ratio in the pavement thickness mode. Since the tire contact area is constant, the P/C ratio is also constant in the pavement thickness mode. This fixed P/C ratio should be used for converting passes to coverages for pavement thickness determination and equivalent aircraft operations.

2 New FAA layered elastic and finite element pavement design procedures were adopted in AC 150/5320-6E. The pavement thickness mode uses the FAA CBR method and the FAA Westergaard method, identified in previous versions of AC 150/5320-6. These historical procedures are consistent with the ACN/PCN method, an internationally used standard published by ICAO. Data from the historical procedures relative to the existing ICAO standard are included in this AC.

3.6.2 PCN. › 3.6.2.2 The program includes a help file to assist users.

08/14/14 AC 150/5335-5C

3.6 Using the COMFAA Program. Using the COMFAA program to calculate ACN values to determine PCN is visually interactive and intuitive.

3.6.1 ACN. The user—

 Selects the desired aircraft,

 Confirms the physical properties of the aircraft. Only gross weight, percent gross

weight on main gear, and tire pressure are changeable. All other properties are fixed by the ICAO standard.

 Clicks on the “MORE” button, and

 Clicks on the ACN Flexible or ACN Rigid button to determine the ACN for the four

standard subgrade conditions.

 Clicks on the “Details” button to view parameters used to compute ACN.

3.6.2 PCN.

3.6.2.1 The user—

 Adds the runway traffic mix aircraft to an external file,

 Confirms the physical properties of each individual aircraft in the traffic

mix,

 Inputs either annual departures or coverages of the aircraft,

 Inputs the evaluation thickness and the subgrade support strength,

 Inputs the concrete strength if analyzing a rigid pavement,

 Clicks on the “LESS” button to activate the PCN Batch computational

mode, and

 Clicks on the PCN Flexible Batch or PCN Rigid Batch button to

determine the PCN of the pavement.

 Clicks on the “Details” button to view the Results Tables.

3.6.2.2 The program includes a help file to assist users. Figures 3-1, 3-2, and 3-3 summarize the operation of the COMFAA program.

08/14/14 AC 150/5335-5C

Figure 3-1. Computational Modes of the COMFAA Program

08/14/14 AC 150/5335-5C

Figure 3-2. Operation of the COMFAA Program in ACN Mode

08/14/14 AC 150/5335-5C

Figure 3-3. Operation of the COMFAA Program in PCN Batch Mode

Figure 3-2: picture of page 17Figure 3-2 · page 17
Picture of the page from the copy saved here

4.3 Using Aircraft Method to Determine PCN. › 4.3.2 Inaccuracies of the Using Aircraft Method.

08/14/14 AC 150/5335-5C

CHAPTER 4. DETERMINATION OF PCN NUMERICAL VALUE

4.1 PCN Concept. The determination of a pavement rating in terms of PCN is a process of (1) determining the ACN for each aircraft considered to be significant to the traffic mixture operating of the subject pavement and (2) reporting the ACN value as the PCN for the pavement structure. Under these conditions, any aircraft with an ACN equal to or less than the reported PCN value can safely operate on the pavement subject to any limitations on tire pressure.

Note: PCN values determined in accordance with this AC depend upon the aircraft traffic used to determine the PCN value. Airports should re-evaluate their posted PCN value if significant changes to the original aircraft traffic occur.

4.2 Determination of Numerical PCN Value. Determination of the numerical PCN value for a particular pavement can be based upon one of two procedures: the “Using” aircraft method or the “Technical” evaluation method. ICAO procedures permit member states to determine how PCN values will be determined based upon internally developed pavement evaluation procedures. Either procedure may be used to determine a PCN, but the methodology used must be reported as part of the posted rating.

4.3 Using Aircraft Method to Determine PCN. The Using aircraft method is a simple procedure where ACN values for all aircraft currently permitted to use the pavement facility are determined and the largest ACN value is reported as the PCN. This method is easy to apply and does not require detailed knowledge of the pavement structure. Figures 4-1 and 4-2 show an example of the Using Aircraft Method. The subgrade support category IS NOT a critical input when reporting PCN based on the Using Aircraft Method. The recommended subgrade support category when information IS NOT available should be Category B.

4.3.1 Assumptions of the Using Aircraft Method. An underlying assumption with the Using aircraft method is that the pavement structure has the structural capacity to accommodate all aircraft in the traffic mixture, and that each aircraft is capable of operating on the pavement structure without weight restriction. From a technical point of view, the Using Aircraft method assumes that the number of total operations is equal to 10,000 coverages of the using aircraft with the highest ACN. The methodology used to determine ACN/PCN does not consider the critical design aircraft used to determine airport dimensional requirements.

4.3.2 Inaccuracies of the Using Aircraft Method. The accuracy of this method is greatly improved when aircraft traffic information is available. Significant over-estimation of the pavement capacity can result if an excessively damaging aircraft, which uses the pavement on a very infrequent basis, is used to determine the PCN. Likewise, significant under-estimation of the pavement capacity can lead to uneconomic use of the pavement by preventing acceptable traffic

08/14/14 AC 150/5335-5C

from operating. Although there are no minimum limits on frequency of operation before an aircraft is considered part of the normal traffic, the reporting agency must use a rational approach to avoid overstating or understating the pavement capacity. A consistent method based on a design period minimum frequency is recommended and presented in Appendix C. The frequency recommended is equal to 1,000 coverages of the aircraft with the highest ACN for the Using method.

Note: Use of the Using aircraft method is discouraged on a long-term basis due to the concerns listed above.

Figure 4-1. Operation of COMFAA ACN Only Program, Version in Batch Mode

Figure 4-1: picture of page 20Figure 4-1 · page 20
Picture of the page from the copy saved here

4.4 Technical Evaluation Method to Determine PCN. › 4.4.2 The accuracy of a technical evaluation is better than that…

08/14/14 AC 150/5335-5C

Figure 4-2. COMFAA Program, ACN Only Version in Batch Mode

4.4 Technical Evaluation Method to Determine PCN.

4.4.1 The strength of a pavement section is difficult to summarize in a precise manner and will vary depending on the unique combination of aircraft loading conditions, frequency of operation, and pavement support conditions. The technical evaluation method attempts to address these and other site-specific variables to determine reasonable pavement strength. In general terms, for a given pavement structure and given aircraft, the allowable number of operations (traffic) will decrease as the intensity of pavement loading increases (increase in aircraft weight). It is entirely possible that two pavement structures with different cross-sections will report similar strength. However, the permissible aircraft operations will be considerably different. This discrepancy must be acknowledged by the airport operator and may require operational limitations administered outside of the ACN-PCN system. All of the factors involved in determining a pavement rating are important, and it is for this reason that pavement ratings should not be viewed in absolute terms, but rather as estimations of a representative value. A successful pavement evaluation is one that assigns a pavement strength rating that considers the effects of all variables on the pavement.

Figure 4-2: picture of page 21Figure 4-2 · page 21
Picture of the page from the copy saved here

4.4.2 The accuracy of a technical evaluation is better than that produced with the Using aircraft procedure but requires a considerable increase in time and resources. Pavement evaluation may require a combination of on-site inspections, load-bearing tests, and engineering judgment. It is common to think of pavement strength rating in terms of ultimate strength or immediate failure criteria. However, pavements are rarely removed from service due to instantaneous structural failure. A decrease in the serviceability of a pavement is commonly attributed to increases in surface roughness or localized distress, such as rutting or cracking. Determination of the adequacy of a pavement structure must not only consider the magnitude of pavement loads but the impact of the accumulated effect of traffic volume over the intended life of the pavement. The

4.4.2 The accuracy of a technical evaluation is better than that… › 4.4.2.3 Counting Aircraft Operations.

08/14/14 AC 150/5335-5C

subgrade support category is a necessary input when reporting PCN based on the Technical Method.

Note: There is no recommended subgrade support category when information is not available.

4.4.2.1 Determination of the PCN Value. The PCN numerical value is determined from an allowable load rating. While it is important not to confuse the PCN value with a pavement design parameter, the PCN is developed in a similar fashion. An allowable load rating is determined by applying the same principles as those used for pavement design. The process for determining the allowable load rating takes factors such as frequency of operations and permissible stress levels into account. Allowable load ratings are often discussed in terms of aircraft gear type and maximum gross aircraft weight, as these variables are used in the pavement design procedure. Missing from the allowable load rating, but just as important, is frequency of operation. In determining an allowable load rating, the evaluation must address whether the allowable load rating represents the pavement strength over a reasonable frequency of operation. Once the allowable load rating is established, the determination of the PCN value is a simple process of determining the ACN of the aircraft representing the allowable load and reporting the value as the PCN.

4.4.2.2 Concept of Equivalent Traffic. The ACN-PCN method is based on design procedures that evaluate one aircraft against the pavement structure. Calculations necessary to determine the PCN can only be performed for one aircraft at a time. The ACN-PCN method does not directly address how to represent a traffic mixture as a single aircraft. To address this limitation, the FAA uses the equivalent annual departure concept to consolidate entire traffic mixtures into equivalent annual departures of one representative aircraft. The procedure for evaluating equivalent annual departures for a given aircraft from a traffic mixture is based on the cumulative damage factor concept discussed in Appendix A.

4.4.2.3 Counting Aircraft Operations. When evaluating or designing a pavement section, it is important to account for the number of times the pavement will be stressed. As discussed in paragraph 2.2, an aircraft may have to pass over a given section of pavement numerous times before the portion of pavement considered for evaluation receives one full stress application. While statistical procedures exist to determine the passes required for one full stress application, the evaluation of a pavement section for PCN determination must also consider how aircraft use the pavement in question. The FAA uses a conservative approach for pavement design procedures by assuming that each aircraft using the airport must land and take off once per cycle. Since the arrival or landing weight of the aircraft is usually less than the departure weight, the design procedure only counts one pass at the departure weight for analysis. The one pass at departure weight is considered as one annual

4.6.2 Pavement Type. › 4.6.2.1 Flexible Pavement.

08/14/14 AC 150/5335-5C

departure and the arrival event is ignored. Appendix A provides a detailed discussion of traffic analysis.

4.5 Limitations of the PCN. The PCN value should not be used for pavement design or as a substitute for evaluation. Pavement design and evaluation are complex engineering problems that require detailed analyses. They cannot be reduced to a single number. The PCN rating system uses a continuous scale to compare pavement capacity where higher values represent pavements with larger load capacity.

4.6 Reporting the PCN. The PCN system uses a coded format to maximize the amount of information contained in a minimum number of characters and to facilitate computerization. The PCN for a pavement is reported as a five-part number where the following codes are ordered and separated by forward slashes: Numerical PCN value / Pavement type / Subgrade category / Allowable tire pressure / Method used to determine the PCN. An example of a PCN code is 80/R/B/W/T, which is further explained in paragraph 4.6.6.

4.6.1 Numerical PCN Value. The PCN numerical value indicates the load-carrying capacity of a pavement in terms of a standard single wheel load at a tire pressure of 181 psi (1.25 MPa). The PCN value should be reported in whole numbers, rounding off any fractional parts to the nearest whole number. For pavements of diverse strengths, the controlling PCN numerical value for the weakest segment of the pavement should normally be reported as the strength of the pavement. Engineering judgment may be required in that if the weakest segment is not in the most heavily used part of the runway, then another representative segment may be more appropriate to determine PCN.

4.6.2 Pavement Type. For the purpose of reporting PCN values, pavement types are considered to function as either flexible or rigid structures. Table 4-1 lists the pavement codes for the purposes of reporting PCN.

Table 4-1. Pavement Codes for Reporting PCN

Pavement Type Pavement Code

Flexible F

Rigid R

4.6.2.1 Flexible Pavement. Flexible pavements support loads through bearing rather than flexural action. They comprise several layers of selected materials designed to gradually distribute loads from the surface to the layers beneath. The

08/14/14 AC 150/5335-5C

design ensures that load transmitted to each successive layer does not exceed the layer’s load-bearing capacity.

4.6 Reporting the PCN. › 4.6.4 Allowable Tire Pressure.

4.6.2.2 Rigid Pavement. Rigid pavements employ a single structural layer, which is very stiff or rigid in nature, to support the pavement loads. The rigidity of the structural layer and resulting beam action enable rigid pavement to distribute loads over a large area of the subgrade. The load-carrying capacity of a rigid structure is highly dependent upon the strength of the structural layer, which relies on uniform support from the layers beneath.

4.6.2.3 Composite Pavement. Various combinations of pavement types and stabilized layers can result in complex pavements that could be classified as between rigid or flexible. A pavement section may comprise multiple structural elements representative of both rigid and flexible pavements. Composite pavements are most often the result of pavement surface overlays applied at various stages in the life of the pavement structure. If a pavement is of composite construction, the pavement type should be reported as the type that most accurately reflects the structural behavior of the pavement. The method used in computing the PCN is the best guide in determining how to report the pavement type. For example, if a pavement is composed of a rigid pavement with a bituminous overlay, the usual manner of determining the load-carrying capacity is to convert the pavement to an equivalent thickness of rigid pavement. In this instance, the pavement type should be reported as a rigid structure. A general guideline is that when the bituminous overlay reaches 75 to 100 percent of the rigid pavement thickness the pavement can be considered as a flexible pavement. It is permissible to include a note stating that the pavement is of composite construction but only the rating type, “R” or “F”, is used in the assessment of the pavement load capacity.

4.6.3 Subgrade Strength Category. As discussed in paragraph 2.1, there are four standard subgrade strengths identified for calculating and reporting ACN or PCN values. Tables 2-1 and 2-2 list the values for rigid and flexible pavements.

4.6.4 Allowable Tire Pressure. Table 4-2 lists the allowable tire pressure categories identified by the ACN-PCN system. The tire pressure codes apply equally to rigid or flexible pavement sections; however, the application of the allowable tire pressure differs substantially for rigid and flexible pavements.

4.6 Reporting the PCN. › 4.6.5 Method Used to Determine PCN.

08/14/14 AC 150/5335-5C

Table 4-2. Tire Pressure Codes for Reporting PCN

Category Code Tire Pressure Range

Unlimited W No pressure limit

High X Pressure limited to 254 psi (1.75 MPa)

Medium Y Pressure limited to 181 psi (1.25 MPa)

Low Z Pressure limited to 73 psi (0.50 MPa)

4.6.4.1 Tire Pressures on Rigid Pavements. Aircraft tire pressure will have little effect on pavements with Portland cement concrete (concrete) surfaces. Rigid pavements are inherently strong enough to resist tire pressures higher than currently used by commercial aircraft and can usually be rated as code W.

4.6.4.2 Tire Pressures on Flexible Pavements. Tire pressures may be restricted on asphaltic concrete (asphalt), depending on the quality of the asphalt mixture and climatic conditions. Tire pressure effects on an asphalt layer relate to the stability of the mix in resisting shearing or densification. A poorly constructed asphalt pavement can be subject to rutting due to consolidation under load. The principal concern in resisting tire pressure effects is with stability or shear resistance of lower quality mixtures. A properly prepared and placed mixture that conforms to FAA specification Item P-401 can withstand substantial tire pressure in excess of 218 psi (1.5 Mpa). Item P-401, Hot Mix Asphalt (HMA) Pavements, is provided in the current version of AC 150/5370-10, Standards for Specifying Construction of Airports. Improperly prepared and placed mixtures can show distress under tire pressures of 100 psi (0.7 MPa) or less. Although these effects are independent of the asphalt layer thickness, pavements with well-placed asphalt of 4 to 5 inches (10.2 to 12.7 cm) in thickness can generally be rated with code X or W, while thinner pavement of poorer quality asphalt should not be rated above code Y.

4.6.5 Method Used to Determine PCN. The PCN system recognizes two pavement evaluation methods. If the evaluation represents the results of a technical study, the evaluation method should be coded T. If the evaluation is based on “Using aircraft” experience, the evaluation method should be coded U. Technical evaluation implies that some form of technical study and computation were involved in the determination of the PCN. Using aircraft evaluation means the PCN was determined by selecting the highest ACN among the aircraft currently using the facility and not causing pavement distress. PCN values computed by the technical evaluation method should be reported to the NASR database and shown on the FAA Form 5010, Airport Master Record. Publication of a Using aircraft evaluation in the Airport Master Record, Form 5010, and the NASR database is permitted only by mutual agreement between the airport owner and the FAA.

4.6 Reporting the PCN. › 4.6.7 Report PCN Values to FAA (See Appendix E).

08/14/14 AC 150/5335-5C

4.6.6 Example PCN Reporting. An example of a PCN code is 80/R/B/W/T—with 80 expressing the PCN numerical value, R for rigid pavement, B for medium strength subgrade, W for high allowable tire pressure, and T for a PCN value obtained by a technical evaluation.

4.6.7 Report PCN Values to FAA (See Appendix E). Once a PCN value and the coded entries are determined, the PCN code should be reported to the appropriate regional FAA Airports Division, either in writing or as part of the annual update to the Airport Master Record, FAA Form 5010-l. The PCN code will be disseminated by the National Flight Data Center through aeronautical publications such as the Airport/Facility Directory (AFD) and the Aeronautical Information Publication (AIP). An aircraft’s ACN can then be compared with published PCN’s to determine if pavement strength places any restrictions on the aircraft operating on that pavement, such as the aircraft’s tire pressure or load.

A.2 Equivalent Traffic Terminology. › A.2.1 Arrival (Landing) and Departure (Takeoff).

08/14/14 AC 150/5335-5C Appendix A

APPENDIX A. EQUIVALENT TRAFFIC

Equivalent Traffic. A.1

A.1.1 A detailed method based on the cumulative damage factor (CDF) procedure allows the calculation of the combined effect of multiple aircraft in the traffic mix for an airport. This combined traffic is brought together into the equivalent traffic of a critical aircraft. This is necessary since the procedure used to calculate ACN allows only one aircraft at a time. By combining all of the aircraft in the traffic mix into an equivalent critical aircraft, calculation of a PCN that includes the effects of all traffic becomes possible. The methodology used to determine ACN/PCN does not consider the critical design aircraft used to determine airport dimensional requirements.

A.1.2 The assessment of equivalent traffic, as described in this section, is needed only in the process of determining PCN using the technical method and may be disregarded when the Using aircraft method is employed.

A.1.3 In order to arrive at a technically derived PCN, it is necessary to determine the maximum allowable gross weight of each aircraft in the traffic mixture, which will generate the known pavement structure. This in turn requires that the pavement crosssection and aircraft loading characteristics be examined in detail. Consequently, the information presented in this appendix appears at first to apply to pavement design rather than a PCN determination. However, with this knowledge in hand, an engineer will be able to arrive at a PCN that will have a solid technical foundation.

Equivalent Traffic Terminology. A.2

In order to determine a PCN, based on the technical evaluation method, it is necessary to define common terms used in aircraft traffic and pavement loading. The terms arrival, departure, pass, coverage, load repetition, operation, and traffic cycle are often used interchangeably by different organizations when determining the effect of aircraft traffic operating on a pavement. It is important to determine which aircraft movements need be counted when considering pavement stress and how the various movement terms apply in relation to the pavement design and evaluation process. For the purposes of this document, they are differentiated as follows:

A.2.1 Arrival (Landing) and Departure (Takeoff). Typically, aircraft arrive at an airport with a lower amount of fuel than is used at takeoff. As a consequence, the stress loading of the wheels on the runway pavement is less when landing than at takeoff due to the lower weight of the aircraft as a result from the fuel used during flight and the lift on the wings. This is true even at the touchdown impact in that there is still lift on the wings, which alleviates the dynamic vertical force. Because of this, the FAA pavement design procedure only considers departures and ignores the arrival traffic count. However, if the aircraft do not receive additional fuel at the airport, then the landing weight will be substantially the same as the takeoff weight (discounting the changes in passenger count and cargo), and the landing operation should be counted as a takeoff for pavement stress loading cycles. In this latter scenario, there are two equal load stresses on the pavement for each traffic count

A.2.2 Pass. › A.2.2.1 Parallel Taxiway Scenario.

08/14/14 AC 150/5335-5C Appendix A

(departure), rather than just one. Regardless of the method of counting load stresses, a traffic cycle is defined as one takeoff and one landing of the same aircraft, subject to a further refinement of the definition in the following text.

A.2.2 Pass. A pass is a one-time movement of the aircraft over the runway pavement. It could be an arrival, a departure, a taxi operation, or all three, depending on the loading magnitude and the location of the taxiways. Figure A-1 shows typical traffic patterns for runways having either parallel taxiways or central taxiways. A parallel taxiway requires that none or very little of the runway be used as part of the taxi movement. A central taxiway requires that a large portion of the runway be used during the taxi movement.

Figure A-1. Traffic Load Distribution Patterns

Parallel Taxiway Scenario. A.2.2.1

In the case of the parallel taxiway, shown as Figure A1-1a in Figure A-1, two possible loading situations can occur. Both of these situations assume that the passenger count and cargo payload are approximately the same for the entire landing and takeoff cycle:

1. If the aircraft obtains fuel at the airport, then a traffic cycle consists of only one pass since the landing stress loading is considered at a reduced level, which is a fractional equivalence. For this condition only the takeoff pass is counted, and the ratio of passes to traffic cycles (P/TC) is 1.

2. If the aircraft does not obtain fuel at the airport, then both landing and takeoff passes should be counted, and a traffic cycle consists of two passes of equal load stress. In this case, the P/TC ratio is 2.

A.2.2 Pass. › A.2.2.4 Table A-1 summarizes the standard P/TC ratio discussion.

08/14/14 AC 150/5335-5C Appendix A

Central Taxiway Scenario. A.2.2.2

For a central taxiway configuration, shown as Figure A1-1b in Figure A-1, there are also two possible loading situations that can occur. As was done for the parallel taxiway condition, both of these situations assume that the payload is approximately the same for the entire landing and takeoff cycle:

1. If the aircraft obtains fuel at the airport, then both the takeoff and taxi to takeoff passes should be counted since they result in a traffic cycle consisting of two passes at the maximum load stress. The landing pass can be ignored in this case. It is recognized that only part of the runway is used during some of these operations, but it is conservative to assume that the entire runway is covered each time a pass occurs. For this situation, the P/TC ratio is 2.

2. If the aircraft does not obtain fuel at the airport, then both the landing and takeoff passes should be counted, along with the taxi pass, and a traffic cycle consists of three passes at loads of equal magnitude. In this case, the P/TC ratio is 3.

A simplified, but less conservative, approach would be use a P/TC ratio of 1 A.2.2.3

for all situations. Since a landing and a takeoff only apply full load to perhaps the end third of the runway (opposite ends for no shift in wind direction), this less conservative approach could be used to count one pass for both landing and takeoff. However, the FAA recommends conducting airport evaluations on the conservative side, which is to assume any one of the passes covers the entire runway.

Table A-1 summarizes the standard P/TC ratio discussion. A.2.2.4

Table A-1. Standard P/TC Ratio Summary (see Note)

Taxiway Serving the

Runway

P/TC

Fuel Obtained at the Airport

(i.e. departure gross weight more

than arrival gross weight.)

P/TC

No Fuel Obtained at the Airport

(i.e. departure gross weight same

as arrival gross weight.)

Parallel 1 2

Central 2 3

Note: The standard P/TC ratios are whole numbers 1, 2, and 3. The range of values that can be entered in the software is 0.001 thru 10.0. This feature allows flexibility in those instances where a fraction of the total traffic may use different runways or other pavements. For example, a P/TC ratio of 0.5 multiplies the coverages of each aircraft by 0.5, which will increase the PCN of the pavement.

A.2.5 Annual Departure and Traffic Cycle Ratio. › A.2.5.1 The FAA standard for counting traffic cycles at an airport for…

08/14/14 AC 150/5335-5C Appendix A

A.2.3 Coverage.

When an aircraft moves along a runway, it seldom travels in a perfectly A.2.3.1

straight line or over the exact same wheel path as before. It will wander on the runway with a statistically normal distribution. One coverage occurs when a unit area of the runway has been traversed by a wheel of the aircraft main gear. Due to wander, this unit area may not be covered by the wheel every time the aircraft is on the runway. The number of passes required to statistically cover the unit area one time on the pavement is expressed by the pass to coverage (P/C) ratio.

Although the terms coverage and P/C ratio have commonly been applied to A.2.3.2

both flexible and rigid pavements, the P/C ratio has a slightly different meaning when applied to flexible pavements as opposed to rigid pavements. This is due to the manner in which flexible and rigid pavements are considered to react to various types of gear configurations. For gear configurations with wheels in tandem, such as dual tandem (2D) and triple dual tandem (3D), the ratios are different for flexible and rigid pavements, and using the same term for both types of pavements may become confusing. It is incumbent upon the user to select the proper value for flexible and rigid pavements.

Aircraft passes can be determined (counted) by observation but coverages A.2.3.3

are used by the COMFAA program. The P/C ratio is necessary to convert passes to coverages for use in the program. This ratio is different for each aircraft because of the different number of wheels, main gear configurations, tire contact areas, and load on the gear. Fortunately, the P/C ratio for any aircraft is automatically determined by the COMFAA program and the user only need be concerned with passes.

A.2.4 Operation. The meaning of this term is unclear when used in pavement design or evaluation. It could mean a departure at full load or a landing at minimal load. It is often used interchangeably with pass or traffic cycle. When this description of an aircraft activity is used, additional information should be supplied. It is usually preferable to use the more precise terms described in this section.

A.2.5 Annual Departure and Traffic Cycle Ratio.

The FAA standard for counting traffic cycles at an airport for pavement A.2.5.1

design purposes is to count one landing, one taxi, and one take-off as a single event called a departure. For pavement evaluation related to determination of PCN, it may be necessary to adjust the number of traffic cycles (departures) based upon the scenarios discussed in paragraph 1.1b of this appendix. Similar to the discussion above regarding P/C ratio, the traffic cycle to coverage (TC/C) ratio is needed to finalize the equivalent traffic determination. The TC/C ratio differs when applied to flexible pavements as opposed to rigid pavements. The ratio in flexible pavement, rather than passes to coverages, is required since there could be one or more

A.3 Equivalent Traffic Calculations. › A.3.1 In order to complete the equivalent traffic calculations for…

08/14/14 AC 150/5335-5C Appendix A

passes per traffic cycle. When only one pass on the operating surface is assumed for each traffic count, then the P/C ratio is sufficient. However, when situations are encountered where more than one pass is considered to occur during the landing to takeoff cycle, then the TC/C ratio is necessary in order to properly account for the effects of all of the traffic. These situations occur most often when there are central taxiways or fuel is not obtained at the airport.

Equation A-1 translates the P/C ratio to the TC/C ratio for flexible and rigid A.2.5.2

pavements by including the previously described ratio of passes to traffic cycles (P/TC):

TC P C P C TC   (Equation A-1)

Where:

TC = Traffic Cycles

C = Coverages

P = Passes

Since the COMFAA program will automatically determine passes to A.2.5.3

coverages and convert annual departures to coverages, the conditions described in paragraph A.2.2 can be addressed by simply multiplying annual departures by the pass to traffic cycle (P/TC) ratio. COMFAA requires the P/TC ratio parameter and will automatically perform this multiplication.

Equivalent Traffic Calculations. A.3

A.3.1 In order to complete the equivalent traffic calculations for converting one of the aircraft in the mix to another, a procedure based on cumulative damage factor (CDF) is used. The CDF method is similar to the one used in the design procedures embodied in the design program FAARFIELD, required by AC 150/5320-6, and provides more consistent results than the wheel load method (as in FAA’s CBR and Westergaard methods) when the traffic mix contains a wide range of gear geometries and strut loads. The primary difference between the CDF procedure used here and the one in FAARFIELD is that in FAARFIELD, the CDF is summed over all aircraft to produce the criterion for design whereas in the procedure used here the CDF methodology is used to convert the traffic for the complete mix into an equivalent number of coverages of one of the aircraft in the mix. That aircraft is designated the “critical” aircraft or “most demanding” aircraft for PCN determination or the “design” aircraft for thickness design (FAA’s CBR and Westergaard methods). The wheel load method is briefly described before describing the CDF method.

A.3 Equivalent Traffic Calculations. › A.3.4 Alternatively, both operations can be combined into a single…

08/14/14 AC 150/5335-5C Appendix A

A.3.2 In the wheel load method, select one of the aircraft in the mix to be the critical aircraft and then convert the traffic of the remaining aircraft into equivalent traffic of the critical aircraft. First, with equation A-1, convert the traffic for the gear type of each of the conversion aircraft into equivalent traffic for the same gear type as the critical aircraft.

) (8.0 N M CNV CRTGE TC TC    (Equation A-2)

Where:

TCCNV = the number of traffic cycles of the conversion aircraft.

TCCRTGE = the number of traffic cycles of the critical aircraft equivalent to the number of traffic cycles of the conversion aircraft due to gear type equivalency.

N = the number of wheels on the main gear of the conversion aircraft.

M = the number of wheels on the main gear of the critical aircraft.

A.3.3 Second, with equation A-3, convert the gear equivalency traffic cycles into equivalent traffic based on load magnitude.

   

 

CNV CRT W W CRTGE CRTE

CNV

CRT CRTGE CRTE

TC TC

W

W TC TC

 

Or

Log Log

(Equation A-3)

Where:

TCCRTE = the number of traffic cycles of the critical aircraft equivalent to the number of traffic cycles of the conversion aircraft due to gear type and load magnitude equivalencies.

WCNV = the wheel load of the conversion aircraft.

WCRT = the wheel load of the critical aircraft.

A.3.4 Alternatively, both operations can be combined into a single equation:

 

CNV CRT W W N M CNV CRTE TC TC ) (8.0    (Equation A-4)

A.3 Equivalent Traffic Calculations. › A.3.8 CDF is the fraction of the total pavement life used up by…

08/14/14 AC 150/5335-5C Appendix A

A.3.5 Finally, the equivalent traffic cycles of all of the conversion aircraft are added to the original traffic cycles of the critical aircraft to give the total equivalent traffic cycles of the critical aircraft.

A.3.6 In the CDF method, the number of equivalent traffic cycles of the critical aircraft is defined as the number of traffic cycles of the critical aircraft that will cause the same amount of damage to the pavement as the number of traffic cycles of the conversion aircraft, where damage is defined by CDF.

A.3.7 CDF is derived from Miner’s Rule, which states the damage induced in a structural element is proportional to the number of load applications divided by the number of load applications required to fail the structural element. In airport pavement design, load applications are counted in coverages, so the relationship for calculating equivalent traffic is first derived in terms of coverages.

aircraft conversion the of coverages the from resulting factor damage cumulative

aircraft conversion by the loaded hen pavement w the fail to coverages

aircraft conversion the of coverages

 

CNVF

CNV CNV C

C CDF

aircraft critical the of coverages equivalent the from resulting factor damage cumulative

aircraft critical by the loaded hen pavement w the fail to coverages

aircraft critical the of coverages equivalent

 

CRTF

CRTE CRTE C C CDF

A.3.8 CDF is the fraction of the total pavement life used up by operating the indicated aircraft on the pavement. It therefore follows that the CDF for the equivalent critical aircraft is equal to the CDF for the conversion aircraft. Or:

and ,

CNVF

CNV

CRTF

CRTE

C

C C C 

CNV CNVF

CRTF CRTE C C C C 

(Equation A-5)

But: CRTE CRT CRTE

CNV CNV CNV

C PC TC

C PC TC

 

  and ,

Where:

TCCNV = the number of traffic cycles of the conversion aircraft.

TCCRTE = the number of traffic cycles of the critical aircraft equivalent to the number of traffic cycles of the conversion aircraft.

PCCNV = pass-to-coverage ratio for the conversion aircraft.

PCCRT = pass-to-coverage ratio for the critical aircraft.

A.3 Equivalent Traffic Calculations. › A.3.14 Table A-2 shows how the above calculations are combined, using…

08/14/14 AC 150/5335-5C Appendix A

A.3.9 Therefore, the equivalent traffic cycles of the critical aircraft by the CDF method is given by:

CNV CNVF

CRTF

CNV

CRT CRTE TC C C PC

PC TC 

(Equation A-6)

A.3.10 Equation A-6 can be rewritten as:

CNVI CRTF CRTEI CDF C C   Where:

CCRTEI = the number of equivalent coverages of the Ith aircraft in the list, including the critical aircraft.

CDFCNVI = the CDF of the Ith aircraft in the list, including the critical

aircraft.

A.3.11 Summing over all aircraft in the list gives the total number of equivalent coverages of

the critical aircraft, CCRTETotal, as:

  

  

   

N

I

CNVI CRTF

N

I

CNVI CRTF

N

I

CRTEI CRTETotal CDF C CDF C C C

1 1 1 Where N = the total number of aircraft in the list, including the critical aircraft.

A.3.12 Defining the total CDF for the traffic mix, CDFT, as the total number of equivalent

coverages of the critical aircraft divided by the number of coverages to failure of the critical aircraft, gives the equation:

  

N

I

CNVI CRTF

CRTETotal T CDF C C CDF

1 (Equation A-7)

A.3.13 The total CDF for the traffic mix is therefore, by this definition, the sum of the CDFs of

all of the aircraft in the traffic mix, including that of the critical aircraft.

A.3.14 Table A-2 shows how the above calculations are combined, using the COMFAA Life

calculation with the Batch option checked, to determine the equivalent traffic cycles of the critical aircraft. The pavement is assumed to be a flexible structure 33.80 inches thick on a CBR 8 subgrade. For this example, assume that the B747-400 is the critical aircraft. Also assume that the P/TC ratio is 1.0 so Traffic Cycles equals Annual Departures. Referring to the Top table, the CDF contribution of each aircraft on the pavement is calculated by dividing 20-year Coverages (Column 7) by Life (Column 9), with results shown in the Bottom portion of the table. The B747-400 is the assumed critical aircraft, so the operations of all other aircraft are equated to the B747-400. The results are shown in Column 11 of the Bottom portion of the table. Column 11 results use equation A-6, i.e., (3000/0.6543)*Col. 10. The sum of the equivalent annual departures (Equation A-7) indicates that all other aircraft are equivalent to 468 departures of the B747-400.

A.3 Equivalent Traffic Calculations. › A.3.16 Coverages to failure for each individual aircraft is computed in…

08/14/14 AC 150/5335-5C Appendix A

A.3.15 The Top portion of the table can be viewed in the Details window in the program after

executing the Life function for Flexible pavement with all computation features available (shown when the “MORE” button is clicked). Pavement thickness and subgrade strength must be entered in the program for the Life function to work correctly. Results for all aircraft in the list will be computed and displayed if the Batch box is checked. Otherwise, results for only one aircraft are displayed. Detailed instructions are given later for operating the program.

A.3.16 Coverages to failure for each individual aircraft is computed in the program by

changing the number of coverages for that aircraft until the design thickness by the CBR method (for flexible pavements) is the same as the evaluation pavement thickness, in this case 33.8 inches. As explained above, CDF is the ratio of applied coverages to coverages to failure, and is a measure of the amount of damage done to the pavement by that aircraft over a period of 20 years (under the assumptions implicit in the design procedure). If the CDF for any aircraft is equal to one, then the pavement is predicted to fail in 20 years if it is the only aircraft in operation. If the sum of the CDFs for all aircraft in the list is equal to one, then the pavement is predicted to fail in 20 years with all of the aircraft operating at their assumed operating weights and annual departures.

Example of COM FAA Batch Life C alculations

Table A-2. Example of COMFAA Batch Life Calculations

A.3 Equivalent Traffic Calculations. › A.3.17 It should be noted that the sum of the CDFs as calculated in…

08/14/14 AC 150/5335-5C Appendix A

The sum of the CDFs in this example is 0.7564, indicating that the pavement is being operated under a set of conservative assumptions.

A.3.17 It should be noted that the sum of the CDFs as calculated in COMFAA do not strictly

provide a prediction of pavement damage caused by the accumulation of damage from all of the aircraft because not all of the aircraft landing gears pass down the same longitudinal path. The summation given here would therefore provide a somewhat conservative result than expected. In comparison with the FAARFIELD computer program, the COMFAA values correspond to the “CDF Max for Aircraft” values from FAARFIELD. The “CDF Contribution” values from FAARFIELD are summed along defined longitudinal paths and do not correspond to the values from COMFAA, except when the Contribution and Max for Aircraft values coincide. This discussion indicates how, all other things being equal, the equivalent critical aircraft concept used in FAA’s CBR and Westergaard methods and in COMFAA, produces more conservative designs than the procedure used in FAARFIELD, and why the two methodologies can never be made to produce the same predictions of pavement life for different traffic mixes. For a new design using FAARFIELD in which the design thickness is determined based on CDF=1.0 for the traffic mix, the PCN determined from COMFAA will not reflect the true pavement design life. In this situation, consider setting the PCN = ACN of the highest using aircraft.

B.2 Flexible Pavement Cross-Section Properties—Equivalent Thickness… › B.2.2 When no aircraft in the traffic mix have four or more wheels on a…

08/14/14 AC 150/5335-5C Appendix B

APPENDIX B. TECHNICAL EVALUATION METHOD—EVALUATION PAVEMENT

PROPERTIES DETERMINATION

Technical Evaluation Method. B.1

The Technical Evaluation method for determining a PCN requires pavement thickness and cross-sectional properties as well as traffic mix details.

Flexible Pavement Cross-Section Properties—Equivalent Thickness B.2

Determination.

B.2.1 For evaluation purposes, the actual thickness of the flexible pavement section under consideration must be converted to a standard flexible pavement section.. The standard section, which corresponds to the total thickness requirement calculated by the COMFAA program, assumes a defined layer thickness for the asphalt surface, a defined layer thickness of aggregate base material with a CBR 80 or higher, and a variable thickness subbase layer with a CBR 20 or greater. For flexible pavement systems, two standard structural reference sections have been defined.

B.2.2 When no aircraft in the traffic mix have four or more wheels on a main gear, the reference structure to be used is: 3 inches asphalt surface course (P401) and 6 inches crushed aggregate base course (P209). When one or more aircraft in the traffic mix have four or more wheels on a main gear, the reference structure to be used is: 5 inches asphalt surface course (P401) and 8 inches crushed aggregate base course (P209).

Table 3. Reference Structure for Traffic Mix with 4 or More Wheels

Reference Structural

Layer Thickness

(inches)

Less than Four Wheels on Main

Gear

Four or More Wheels on Main

Gear

Asphaltic Concrete

(FAA Item P-401) 3 5

High Quality Granular Base (FAA Item P-209) 6 8

Appendix B. › B.3 Rigid Pavement Cross-Section Properties—Improved Subgrade Support…

08/14/14 AC 150/5335-5C Appendix B

B.2.3 If the pavement has excess material or improved materials, the total pavement thickness may be increased according to the FAA CBR method summarized herein as Figures B-1 and B-2 and Table B-1. The pavement is considered to have excess asphalt, which can be converted to extra equivalent thickness, when the asphalt thickness is greater than the minimum thickness of asphalt surfacing of the referenced pavement section. The pavement may also be considered to have excess aggregate base thickness when the cross-section has a high quality crushed aggregate base thickness greater than the minimum thickness of high quality crushed aggregate base of the referenced pavement section or when other improved materials, such as asphalt stabilization or cement treated materials, are present. Likewise, additional improved base materials may also be converted to additional subbase material to add to the total pavement thickness.

B.2.4 If the evaluation pavement section is deficient for asphalt pavement surface course (i.e. less than 3 inches) and/or high quality crushed aggregate base course (i.e. less than 6 inches), the subbase thickness is reduced using a slightly more conservative inverse layer equivalency factor for surface course material and/or the subbase thickness is reduced using a slightly more conservative inverse layer equivalency factor for high quality crushed aggregate base material. This is shown in Table B-1.

Table B-1. FAA Flexible Pavement Layer Equivalency Factor Range

Note: Engineering judgment may be used to adjust recommended factors for all Structural Items within the ranges shown in the table. Include justification for higher or lower conversion factors than recommended factors when reporting PCN values.

Rigid Pavement Cross-Section Properties—Improved Subgrade Support B.3

Determination. The rigid pavement characteristics—including subgrade soil modulus, k, the concrete thickness, and flexural strength—are needed for PCN determination. The foundation modulus (k value) is assigned to the material directly beneath the concrete pavement

08/14/14 AC 150/5335-5C Appendix B

Appendix B. › B.4 Availability of Support Program to Determine Pavement…

layer. However, the k value for the subgrade is determined and then adjusted to account for improved layers (subbases) between the subgrade and the concrete layer. There are k value corrections available for uncrushed aggregate subbases, crushed aggregate subbases, and subbases stabilized with asphalt cement or Portland cement. The k value may be increased according to the methods described in the FAA Westergaard method, summarized herein as Figures B-3 through B-6. The thickness of the concrete in a rigid pavement may be increased if an asphalt overlay has been placed on the surface. The thickness may be increased using the factor described in the FAA Westergaard method, summarized herein as Figure B-7. Each 2.5 inches of asphalt may be converted to 1.0 inch of concrete. The references for both improvement subgrade support guidance and additional thickness conversion guidance is summarized in Table B-2.

Table B-2. FAA Rigid Pavement Subbase Effect on Foundation k Value

FAA Pavement Layer

Effect When

Uncrushed Aggregate (Bank

Run Sand and Gravel) is Used as

the Subbase

Effect When Well-

Graded Crushed Aggregate is Used

as the Subbase

Effect When Asphalt

Cement or Portland

Cement Stabilized Materials are Used as

the Subbase

P-401 and/or P-403 Ref. Figure B-6

P-306 Ref. Figure B-6

P-304 Ref. Figure B-6

P-209 Ref. Figure B-5,

Upper Graph

P-208 and/or P-211 Ref. Figure B-5,

Lower Graph

P-301 Ref. Figure B-5,

Lower Graph

P-154 Ref. Figure B-5,

Lower Graph

Effect on Rigid Pavement Thickness

P-401 Overlay Ref. Figure B-7

Availability of Support Program to Determine Pavement Characteristics. B.4

To facilitate the use of the ACN-PCN system, FAA developed a software application that incorporates the guidance in this appendix and determines the evaluation thickness

Appendix B. › B.5 Using the Support Program.

08/14/14 AC 150/5335-5C Appendix B

for both flexible and rigid pavements and the foundation k value for rigid pavements. The software may be downloaded from the FAA website.3

Using the Support Program. B.5

The support program is a spreadsheet, which may be updated periodically. Examples are shown in Figure C-2 and Figure C-3.

3 See http://www.faa.gov/airports/engineering/design_software/. This software is in the public domain.

08/14/14 AC 150/5335-5C Appendix B

Figure B-1. Flexible Pavement Stabilized Base Layer(s) Equivalency Discussion

(FAA CBR method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-2. Flexible Pavement Stabilized Base Layer(s) Equivalency Discussion

(Continued) (FAA CBR method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-3. Rigid Pavement Stabilized Subbase Layer(s) Discussion

(FAA Westergaard method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-4. Rigid Pavement Stabilized Subbase Layer(s) Discussion (Continued)

(FAA Westergaard method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-5. Subbase Layer Effect on Subgrade Support, k, for Rigid Pavement

(FAA Westergaard method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-6. Stabilized Subbase Layer Effect on Subgrade Support, k, for Rigid Pavement

(FAA Westergaard method)

08/14/14 AC 150/5335-5C Appendix B

Figure B-7. Flexible Pavement quivalency to Rigid Pavement

(FAA Westergaard method)

08/14/14 AC 150/5335-5C Appendix B

Page Intentionally Blank

C.1 The Using Aircraft Method. › C.1.3 These steps are explained below in greater detail. Figure C-1…

APPENDIX C. PCN DETERMINATION EXAMPLES

The Using Aircraft Method. C.1

C.1.1 The Using aircraft method of determining PCN is presented in the following steps. This procedure can be used when there is limited knowledge of the existing traffic and runway characteristics. It is also useful when engineering analysis is neither possible nor desired. Airport authorities should be more careful in the application of a Using aircraft PCN in that the rating has not been rigorously determined.

C.1.2 There are basic steps required to arrive at a Using aircraft PCN:

 Determine the ACN for each aircraft in the traffic mix currently using the pavement.

 Assign the highest ACN value as the PCN.

C.1.3 These steps are explained below in greater detail. Figure C-1 shows the steps needed to automatically perform the ACN calculations using COMFAA along with the results.

Figure C-1. Example of COMFAA ACN Batch Results

1. Load Ext file. 2. Click More to access ACN Computational Mode. 3. Check Batch. 4. Click Flexible Button or Rigid Button. 5. When calculations finish, click Details Button. 6. View results. 7. Select highest ACN for the pavement’s subgrade category.

1. Assign the pavement surface type as code F or R.

2. From available records, determine the strength of the pavement subgrade. If the subgrade strength is not known, make a judgment of Medium or Low

3. Determine which aircraft has the highest ACN from the list of aircraft that regularly use the pavement, based on the surface type code assigned in Step 1 and the subgrade code in Step 2. ACN values may be determined from the COMFAA program or from ACN graphs found in the manufacturer’s published ACAP manuals. Use the same subgrade code for each of the aircraft when determining the maximum ACN. Base ACNs on the highest operating weight of the aircraft at the airport if the data is available; otherwise, use an estimate or the published maximum allowable gross weight of the aircraft in question. Report the ACN from the aircraft with the highest ACN that regularly uses the pavement as the PCN for the pavement. NOTE: The FAA recommends that an aircraft be considered to 'regularly use' the pavement if the 20-year total of coverages exceeds 1,000. The number of annual departures of the aircraft corresponding to this coverage level can be obtained from COMFAA by switching to PCN or Thickness mode and entering 1000 in the 'Flex 20yr Coverages' or 'Rigid 20yr Coverages' field, as appropriate. In

C.2 Using Aircraft Example for Flexible Pavements. › C.2.2 An airport has a runway with the known traffic mix shown in Table…

COMFAA, coverages are independent of subgrade strength, so an arbitrary CBR or k value can be entered in the appropriate field to compute coverages.

4. The PCN is simply the highest ACN with appropriate tire pressure and evaluation codes added. The numerical value of the PCN may be adjusted up or down at the preference of the airport authority. Adjustments are not considered standard practice but reasons for adjustment may include local restrictions, allowances for certain aircraft, or pavement conditions.

5. The tire pressure code (W, X, Y, or Z) should represent the highest tire pressure of the aircraft fleet currently using the pavement. For flexible pavements, code X should be used if no higher tire pressure is evident from among the existing traffic. It is commonly understood that concrete can tolerate substantially higher tire pressures, so the rigid pavement rating should normally be given as W.

6. The evaluation method for the Using aircraft method is reported as U.

Using Aircraft Example for Flexible Pavements. C.2

C.2.1 The following example illustrates the Using aircraft PCN process for flexible pavements:

C.2.2 An airport has a runway with the known traffic mix shown in Table C-1. The runway has a flexible (asphalt-surfaced) pavement with an estimated subgrade strength of CBR 9, which puts it in subgrade category B. The flexible pavement ACNs for each aircraft in the mix are shown in Table C-1.

Table C-1. Using Aircraft and Traffic for a Flexible Pavement

 Since this is a flexible pavement, the pavement type code is F, (Table 4-1).

 The subgrade strength under the pavement is CBR 9, or Medium category, so the

appropriate code is B (Table 2-2).

 The highest tire pressure of any aircraft in the traffic mix is 216.1 psi, so the tire

pressure code is X (Table 4-2).

 From the above list, the critical aircraft is the B747-400, because it has the highest

ACN of the group at the operational weights shown (59.3/F/B). Additionally, it has regular service.

 Since there was minimal engineering analysis done in this example, and the rating

was determined simply by examination of the current aircraft using the runway, the evaluation code from Paragraph 4.6.5 is U.

 Based on the results of the previous steps, the runway pavement should tentatively

be rated as PCN 59/F/B/X/U, assuming that the pavement is performing satisfactorily under the current traffic.

 If this pavement was a taxiway, the airport could rate this taxiway as the same PCN.

Appendix C. PCN Determination Examples › C.3 Using Aircraft Example for Rigid Pavements.

C.2.3 If the pavement shows obvious signs of distress, this rating should be adjusted downward by the airport authority. If the rating is lowered, then one or more of the aircraft will have ACNs that exceed the assigned rating. This may require the airport to restrict the allowable gross weight for those aircraft or consider pavement strengthening.

Using Aircraft Example for Rigid Pavements. C.3

An airport has a runway with the known traffic mix shown in Table C-2. The runway has a rigid (concrete-surfaced) pavement with an estimated k-value of 300 lbs/in3, which puts it in subgrade category B. The rigid pavement ACNs for each aircraft in the mix are shown in Table C-2.

Table C-2. Using Aircraft and Traffic for a Rigid Pavement

 Since this is a rigid pavement, the pavement type code is R (Table 4-1).

 The subgrade strength under the pavement is k=300 pci, which is Medium category,

so the appropriate code is B (Table 2-1).

 Concrete surfaces can tolerate high tire pressures, so tire pressure code W found in

Table 4-2 should be used for rigid pavement.

 The B777-200 has the highest ACN of the group at the operational weights shown

(63.6/R/B/W).

 Since there was no engineering analysis done in this example, and the rating was

determined simply by examination of the current aircraft using the runway, the evaluation code from Paragraph 4.6.5 is U.

Appendix C. PCN Determination Examples › C.4 The Technical Evaluation Method.

 Based on these steps, the pavement should tentatively be rated as PCN 64/R/B/W/U

in order to accommodate all of the current traffic.

 If the pavement shows obvious signs of distress, this rating should be adjusted

downward by the airport authority. If the rating is lowered, then one or more of the aircraft will have ACNs that exceed the assigned rating. This may require the airport to restrict the allowable gross weight for those aircraft or consideration of pavement strengthening. The rating could also be adjusted upward, depending on the performance of the pavement under the current traffic.

The Technical Evaluation Method. C.4

Use the technical evaluation method of determining PCN when there is reliable knowledge of the existing traffic and pavement characteristics. Total thickness and cross-sectional data are needed to determine the equivalent pavement thickness as described in detail in section 2.1. Although the technical evaluation provides a good representation of existing conditions, the airport authority should recognize there are many variables in the pavement structure as well as the method of analysis itself. The objective of the technical method is to consolidate all traffic into equivalent annual departures, determine allowable gross weight, and assess the ACN for each aircraft in the traffic mixture so that a realistic PCN is selected.

Figure C-2. Flexible Layer Equivalency Spreadsheet to Support COMFAA

C.5 Technical Evaluation for Flexible Pavements. › C.5.2 These steps are explained in greater detail below. These steps…

Figure C-3. Rigid Layer Equivalency Spreadsheet to Support COMFAA.

Technical Evaluation for Flexible Pavements. C.5

C.5.1 The following list summarizes the steps for using the technical evaluation method for flexible pavements:

 Determine the traffic volume in terms of type of aircraft and number of annual

departures/traffic cycles of each aircraft that the pavement will experience over its life.

 Determine the appropriate reference section to use based on the number of wheels

on main gears.

 Determine pavement characteristics, including the subgrade CBR and equivalent

pavement thickness.

 Calculate the maximum allowable gross weight for each aircraft on that pavement at

the equivalent annual departure level.

 Calculate the ACN of each aircraft at its maximum allowable gross weight.

 Select the PCN from the ACN data provided by all aircraft.

C.5.2 These steps are explained in greater detail below. These steps are automated in the COMFAA software. The results file is presented in three tables. (This file is displayed by selecting the ‘details’ button in the COMFAA support spreadsheet.)

 Results Table 1 details input traffic data including thickness requirements for each

aircraft at evaluation thickness and CBR.

 Results Table 2 displays the PCN values for each aircraft at the evaluation pavement

thickness and subgrade CBR, where each aircraft in turn is considered the critical aircraft (i.e., all operations are converted to operations of the critical aircraft). This

C.5 Technical Evaluation for Flexible Pavements. › C.5.3 Figure C-3 shows an example results file. Several examples using…

table also displays the CDF value representing the damage contribution from each aircraft..

 Results Table 3 lists the ICAO standard ACN values for each aircraft in the traffic

mix at the appropriate subgrade category.

C.5.3 Figure C-3 shows an example results file. Several examples using the same traffic mix with different pavement structures at the end of this section further illustrate the process.

Table C-3. Excerpt from COMFAA PCN Batch Results File for Flexible Pavement

1. Determine the traffic volume in terms of annual departures for each aircraft that has used or is planned to use the airport during the pavement life period. Record all significant traffic, including non-scheduled, charter, and military, as accurately as possible. This includes traffic that has occurred since the original construction or last overlay and traffic that will occur before the next planned overlay or

reconstruction. If the pavement life is unknown or undetermined, assume that it will include a reasonable period of time. The normal design life for pavement is 20 years. However, the expected life can vary depending on the existing pavement conditions, climatic conditions, and maintenance practices.

2. The information necessary for the traffic volume process is—

 Past, current, and forecasted traffic cycles of each significant aircraft.

 Aircraft operational or maximum gross weights.

 Typical aircraft weight distribution on the main and nose gear. If unknown,

AC 150/5320-6 assumes 95 percent weight on the main gear.

 Main gear type (dual, dual tandem, etc.).

 Main gear tire pressure.

 Fuel-loading practices of aircraft at the airport (P/TC ratio).

 Type of taxiway system – parallel or central (P/TC ratio).

3. From field data or construction drawings, document the CBR of the subgrade soil. Alternatively, conduct field or laboratory tests of the subgrade soil in order to determine the CBR. Accurate portrayal of the subgrade CBR value is vital to the technical method because a small variation in CBR could result in a disproportionately large variation in the aircraft allowable gross weight and the corresponding PCN.

4. The COMFAA program calculates pavement thickness requirements based on annual departures. COMFAA allows the user to directly input either coverages or annual departures. Since the pass-to-coverage ratio for flexible pavement may be different than rigid pavement, the user must enter coverages in the appropriate location for each pavement type.

5. Determine the total pavement thickness and cross-sectional properties. The thickness of the pavement section under consideration must be converted to an equivalent pavement thickness based on a standard reference pavement section for evaluation purposes. The equivalent pavement thickness is the total thickness requirement calculated by the COMFAA program assuming minimum layer thickness for the asphalt surface, minimum base layer thickness of material with a CBR 80 or higher, and a variable subbase layer with a CBR 20 or greater. If the pavement has excess material or improved materials, the total pavement thickness may be increased according to the FAA CBR method as detailed in Appendix B. The pavement is considered to have excess asphalt, which can be converted to extra crushed aggregate equivalent thickness, when the asphalt thickness is greater than the minimum thickness of asphalt surfaced. The recommended reference section for this traffic mix is an asphalt surface course thickness of 5 inches. The pavement may also be considered to have excess crushed aggregate base thickness when the cross-section has a high quality crushed aggregate base thickness greater than 8 inches or when other improved materials such as asphalt stabilization or cement treated materials, are present. Likewise, additional subbase thickness or improved subbase materials may also be converted to additional total pavement thickness.

Using the support program facilitates converting existing pavement structures to the requisite standard equivalent structure used in COMFAA.

6. Using the annual departures and P/TC ratio for the runway, the equivalent pavement thickness, and the CBR of the subgrade, compute the maximum allowable gross weight for each aircraft at the appropriate ICAO standard subgrade support category using the COMFAA program in the pavement design mode.

7. Assign the subgrade CBR strength found in Step 2 to the appropriate standard ACN-PCN subgrade code as given in Table 2-2.

8. The ACN of each aircraft at the maximum allowable gross weight is determined from the COMFAA program in the ACN mode. Enter the allowable gross weight of the aircraft, and calculate the ACN based on the standard subgrade code corresponding to the CBR found in Step 2. Alternatively, consult an “ACN versus Gross Weight” chart as published in the manufacturer’s ACAP manuals.

9. Assign the tire pressure code based on the highest tire pressure in the traffic mix from Table 4-2. Keep in mind the quality of the asphalt surface layer, as discussed in Section 2.1, when assigning this code. NOTE: Code X is recommended for pavements with 5 or more inches of EXISTING asphalt. Code Y is recommended for pavements with 3 or less inches of EXISTING asphalt.

10. When the evaluation method is technical, assign the code of T, as described in paragraph 4.5e.

11. The numerical value of the PCN is selected from the list of values in COMFAA Batch PCN Results Table 2. If all aircraft regularly use the airport, then select the highest PCN value correlated with the subgrade code and report it as the PCN. If some of the aircraft in the traffic mix use the airport infrequently, then further consideration must be given to the selection of the PCN. If an aircraft that operates infrequently at the airport generates a PCN value considerably higher than the rest of the traffic mix, then using this aircraft to determine the PCN may result in an unrealistic value. A more reasonable PCN can be determined if this aircraft’s operations are set to 1,000 coverages.

12. If the calculated maximum allowable gross weight is equal to or greater than the critical aircraft operational gross weight required for the desired pavement life (Total CDF<1), then the pavement is capable of handling the predicted traffic for the time period established in the traffic forecast. Accordingly, the assigned PCN determined in Step 10 is sufficient. If the allowable gross weight is less than the critical aircraft gross weight required for the desired pavement life (Total CDF>1), then the pavement may be assigned a PCN equal to the ACN of the critical aircraft at that gross weight, but with a lower expected pavement life. Additionally, it may then be necessary to develop a relationship of allowable gross weight based on the assigned PCN versus pavement life. Appendix D provides procedures on how to relate pavement life and gross weight for flexible pavements in terms of PCN. Any overload (see Appendix D) should be treated in terms of ACN and equivalent critical aircraft operations per individual operation. Allowance for the overload should be negotiated with the airport authority since pre-approval cannot be assumed. Specific procedures on how to relate pavement life and gross weight for flexible pavements are found in Appendix D.

C.6.1 Flexible Pavement Example 1. › C.6.1.1 An airport has a flexible (asphalt-surfaced) runway pavement…

Technical Evaluation Examples for Flexible Pavements. C.6

The following four examples demonstrate the technical evaluation method of determining a PCN for flexible pavements. The first example pavement is for an understrength pavement with a traffic volume that has increased to such a level that pavement life is reduced from the original design (Total CDF > 1). The second pavement has a thickness nearly equal to the structural requirement for the 20-year traffic (Total CDF = 1). The third example pavement is the same as the first, except the taxiway has a central configuration rather than parallel, which effectively doubles the number of coverages and reduces the PCN. The fourth example demonstrates a consistent method to report PCN when the pavement under consideration contains significant excess structural capacity relative to the forecast traffic (Total CDF << 1).

C.6.1 Flexible Pavement Example 1.

An airport has a flexible (asphalt-surfaced) runway pavement with a C.6.1.1

subgrade CBR of 8 and a total thickness of 32.0 inches, as shown in Fig. C- 4 (5 inch asphalt surface layer, 4 inches of stabilized base, 6 inch base layer and 17 inches subbase layer). The traffic mix is the same as in the Using Aircraft example, section 3.1. It is assumed for the purposes of this example that the traffic level is constant over the 20-year time period. Additional fuel is generally obtained at the airport before departure, and the runway has a parallel taxiway (P/TC ratio = 1). The pavement was designed for a life of 20 years. The combined thickness of the P-304 and P-209 exceeds the minimum standard for the CDF analysis method and is converted to additional P-154 as shown in Figure C-2 and Table C-4 for an equivalent pavement thickness of 31.9 inches.

Figure C-4. Screen Shot of PCN Worksheet in COMFAA Support Spreadsheet for

Computing Equivalent Pavement Structure in Flexible Example 1

Table C-4. Conversion to Equivalent Pavement Structure in Flexible Example 1

Existing Pavement Structure. P-304 plus P-209 combined exceed P-209 requirements.

Equivalent Pavement Structure. A portion of P- 304 is converted to P-209 and excess P-304 converted to P-154. This conversion results in 1.9 inches added to the equivalent pavement thickness.

5 inch asphalt surface layer (P-401)

4 inch base layer (P-304)

6 inch base layer (P-209)

17 inches subbase layer (P-154)

Subgrade CBR 8

5 inch asphalt surface layer (P-401)

8 inch base layer (P-209)

20.9 inch subbase layer (P-154)

33.9 inch total thickness

Subgrade CBR 8

Fig. A2-2 Figs.A2-1&2 Flexible Pavement Convert to Convert to Structure Items P-209 P-154

P-401/3 P 403 1.6 n/a P-401/3 5.0 in.

P-306 ECONOCRTE 1.2 n/a P-306 0.0 in.

P-304 CEM. TRTD 1.2 n/a P-304 4.0 in.

P-209 Cr AGG 1.0 1.4 P-209 6.0 in.

P-208 Agg, P-211 1.0 1.2 P-208 0.0 in.

P-301 SOIL-CEM. n/a 1.2 P-301 0.0 in.

P-154 Subbase n/a 1.0 P-154 15.0 in.

0.00 0

Equivalent Thickness, mm 8.0 1

P-401/3 5.0

P-209 8.0 P-154 18.9

Total 31.9 p Loc_ID

ENTER Ref.Section Requirements ABC COMFAA Inputs P-401 reference t 5.00 in. Project Details Evaluation thickness t = 31.9 in. P-209 reference t 8.00 in. Evaluation CBR = 8.0 Recommended PCN Codes: F/C/X

Subgrade CBR...

Existing Flexible Pavement

Layers

Reference Guidance AC 150/5335-5B App A-2

Examples

ENTER Existing

Layer Thickness

Pavement ID

5-23

Save

Data

Clear Saved

Data

English Metric

Format

Chart

P-401 HMA

P-304

P-209

Base

P-154 Subbase

Subgrade

CBR 8.0 Subgrade

CBR 8.0

0

10

20

30

40

Existing Pavement Equivalent Pavement

Fdepth from Surface, in.

Zero Layer

Data

Use FAA Std Factors

C.6.1 Flexible Pavement Example 1. › C.6.1.2 Figure C-5 shows the results of the COMFAA Batch PCN Flexible…

Figure C-5. Detailed COMFAA Batch PCN Output – Flexible Example 1

Figure C-5 shows the results of the COMFAA Batch PCN Flexible C.6.1.2

calculations. The top portion of Figure C-5 (Results Table 1) shows the required thickness in accordance with the FAA CBR method for a flexible pavement with a CBR 8 subgrade. The B747-400 aircraft has the greatest individual pavement thickness requirement (31.3 in.) for its total traffic over 20 years. Note that the thickness requirements for several individual aircraft are approximately equal to, or slightly less than, the evaluation pavement thickness of 31.9 in. This indicates that the pavement thickness may be deficient for existing traffic.

C.6.1 Flexible Pavement Example 1. › C.6.1.5 The following notes apply when total CDF > 1:

The middle portion of Figure C-5 (Results Table 2) shows the results of the C.6.1.3

detailed method based on the cumulative damage factor (CDF) procedure that calculates the combined damage from multiple aircraft in the traffic mix. The numerical values in the CDF column represent damage to a 31.9in. thick flexible pavement on a CBR 8 subgrade for each aircraft in the list. The total CDF represents the combined damage from this traffic. Taking each aircraft in turn as the critical aircraft, the program computes total equivalent coverages (based on a CDF analysis), the corresponding thickness for the total equivalent coverages (which is greater than the required thickness for the individual aircraft shown in Results Table 1), and a maximum allowable gross weight. The ACN of the aircraft at the maximum allowable gross weight at 10,000 coverages, at the appropriate ICAO standard CBR, is computed and reported in Results Table 2 as the PCN (last column). In this example, there are two aircraft that can load the pavement over 5,000,000 times before the pavement fails (critical aircraft total equivalent coverages > 5,000,000). These aircraft have little impact on this pavement’s structural performance, and the corresponding PCNs are low. The PCN for this pavement can be reported as the highest PCN in the PCN column. Based on the information in Figure C-5, the airport may report a PCN of 69/F/C/W/T or 69/F/C/X/T.

The bottom portion of Figure C-5 shows the ICAO standard ACN of each C.6.1.4

aircraft at the input values of gross weight, percent gross weight on the main gear, and tire pressure. When the total CDF>1, as is the case in this example, at least one of the ACN values reported in Results Table 3 will exceed all of the PCN values in Results Table 2. In this example, the ACN computed for the B747 is 72.6 on subgrade category C, so the pavement does not have sufficient strength to support existing traffic.

The following notes apply when total CDF > 1: C.6.1.5

1. At least one ACN value in Results Table 3 will be greater than all of the PCN values in Results Table 2.

2. For all aircraft, the thickness for total equivalent coverages (Column 3 in Results Table 2) will exceed the evaluation pavement thickness for the input subgrade CBR.

3. For all aircraft that have fewer than 5,000,000 total equivalent coverages as reported in Column 2 of Results Table 2, the corresponding thickness for total equivalent coverages in Column 3 will be greater than the input evaluation thickness.

4. One aircraft in the list will have the fewest equivalent coverages, greatest thickness requirement for total equivalent coverages, and greatest ACN thickness at the maximum allowable gross weight. The largest ACN thickness value in Results Table 2 (the PCN thickness value) will be less than at least one ACN thickness value in Results Table 3.

C.6.2 Flexible Pavement Example 2. › C.6.2.1 This second example has the same pavement cross section and…

5. A project to strengthen the pavement to support forecast traffic is required.

6. An overload analysis should be performed.

C.6.2 Flexible Pavement Example 2.

This second example has the same pavement cross section and subgrade C.6.2.1

CBR as Example 1, but with reduced traffic that results in a total CDF equal to 1. As in Flexible Example 1, the taxiway has a parallel configuration (Figure A-1b) such that the P/TC ratio = 1. Since the pavement cross section is the same as in Example 1, the evaluation thickness is likewise the same (31.9 in.). The traffic is given in Table C-5.

Table C-5. Input Traffic Data for Rigid Example 1

No. Aircraft Name Gross Weight, lbs.

Percent GW

on Main

Gear

Tire Pressure, psi

Annual Departures

1 A300-B4 STD 364,747 94.00 216.1 915

2 A319-100 STD 141,978 92.60 172.6 732

3 B737-300 140,000 90.86 201.0 3,660

4 B747-400 877,000 93.32 200.0 610

5 B767-200 ER 396,000 90.82 190.0 1,220

6 B777-200 ER 657,000 91.80 205.0 610

7 DC8-63 330,000 96.12 196.0 1,830

C.6.2 Flexible Pavement Example 2. › C.6.2.2 Figure C-6 shows the results of the COMFAA Batch PCN Flexible…

Figure C-6. Detailed COMFAA Batch PCN Output – Flexible Example 2

Figure C-6 shows the results of the COMFAA Batch PCN Flexible C.6.2.2

calculations for Example 2. The top portion of Figure C-6 (Results Table 1) shows the required thickness using the CBR thickness design in accordance with the FAA CBR method for a flexible pavement with a CBR 8 subgrade. As in Example 1, the B747-400 aircraft has the greatest individual pavement thickness requirement (30.34 inches) for its total traffic over 20 years. In this case, all the individual aircraft thickness requirements are less than the evaluation thickness.

C.6.2 Flexible Pavement Example 2. › C.6.2.4 Figure C-7 illustrates a useful feature of the P/TC ratio in…

The middle portion of Figure C-6 (Results Table 2) shows the results of the C.6.2.3

detailed method based on the cumulative damage factor (CDF) procedure that allows the calculation of the combined effect of multiple aircraft in the traffic mix. The various columns are described in Example 1. The PCN for this pavement can be reported as the highest PCN in the last column of Results Table 2. The airport may report a PCN of 73/F/C/W/T or 73/F/C/X/T. Note that the physical structure in this case is the same as Example 1, but the PCN that can be reported is higher than in Example 1, because the technical PCN depends on the anticipated traffic as well as the structure. Results Table 3 shows that all of the aircraft have ACNs at their operating weights that are less than the reported PCN, hence no operating restrictions are needed.

Figure C-7 illustrates a useful feature of the P/TC ratio in COMFAA. In C.6.2.4

Example 1, the total CDF computed is 1.6392. To determine the reduced level of operations of the same traffic mix that would result in CDF = 1, simple take the reciprocal value of Total CDF (= 1/1.6392 = 0.61). Entering the value 0.61 in the P/TC ratio field instead of 1 results in Total CDF = 1. This allows the user to compute the PCN value applicable to the case where CDF = 1, without having to create a separate external traffic file. As shown in Example 4, this provides a consistent means of reporting PCN for pavements that are extremely strong compared to the traffic-driven structural requirement.

C.6.2 Flexible Pavement Example 2. › C.6.2.5 The following notes apply when total CDF = 1:

Figure C-7. Detailed COMFAA Batch PCN Output – Flexible Example 2, Computed Using

the Traffic Mix from Example 1 and Modified P/TC Ratio

The following notes apply when total CDF = 1: C.6.2.5

1. For all aircraft, the thickness for total equivalent coverages (Results Table 2, Column 3) will be the same as the COMFAA evaluation thickness.

2. All maximum allowable gross weights in Results Table 2 will be approximately the same as the COMFAA input gross weights and ACN weights in Results Table 3.

3. All PCN values in Results Table 2 will be the same as the ACN values in Results Table 3.

C.6.3 Flexible Pavement Example 3. › C.6.3.2 Referring to the results Table 2 in the middle portion of the…

C.6.3 Flexible Pavement Example 3.

The only change in this example from the second example is that the C.6.3.1

taxiway has a central configuration rather than parallel, such as that shown in Figure A-1b. Figure C-8 shows the effect when the P/TC ratio changes from 1 to 2, which results in double the number of coverages for each aircraft in the traffic mix. As expected, the required total pavement thickness for each aircraft in the traffic mix has increased. The B747-400 aircraft still has the greatest individual pavement thickness requirement (31.64 inches) for its total traffic over 20 years. Note the thickness requirements for the B747-400 now approaches the evaluation thickness (31.9 in.).

Referring to the results Table 2 in the middle portion of the output, only the C.6.3.2

B737-300 and the A319-100 std airplanes have little impact on this pavement’s performance. It is apparent the pavement is not adequate to accommodate the existing traffic. As expected, changing the taxiway system from parallel to central has lowered the PCN of the pavement by effectively doubling traffic volume. The airport may report 68/F/C/W/T or 68/F/C/X/T. The ACN of two aircraft, the B747-400 and the B777-200 ER exceed the pavement PCN and the airport should plan for a pavement strengthening project or consider placing restrictions on those aircraft. The net effect of the change in taxiway configuration from that of Example 2 is the reduction by 5 in the PCN.

C.6.4 Flexible Pavement Example 4. › C.6.4.1 In some cases, the pavement to be evaluated has significant…

Figure C-8. Detailed COMFAA Batch PCN Output – Flexible Example 3

C.6.4 Flexible Pavement Example 4.

In some cases, the pavement to be evaluated has significant excess C.6.4.1

structural capacity compared with the requirement due to forecast traffic. This situation may arise, for example, when an overlay is added for nonstructural purposes, or in cold climates where a very thick subbase may be needed to provide frost protection on a frost-susceptible subgrade. This example shows a consistent way to report PCN for flexible pavements that are extremely strong with respect to the input traffic (total CDF<<1). In Figure C-9, the pavement from Example 1 has been strengthened with a 2inch overlay. Assuming a reference section with 5 inches of P-401 and 8 inches of P-209, the evaluation thickness for COMFAA is 36.4 inches (versus 31.9 in. prior to the overlay).

C.6.4 Flexible Pavement Example 4. › C.6.4.2 Figure C-10 shows the COMFAA output when PCN is computed using…

Figure C-10 shows the COMFAA output when PCN is computed using the C.6.4.2

evaluation thickness 36.4 in. and P/TC=1. For the overlaid pavement subject to the forecast traffic, total CDF is much less than 1 (total CDF= 0.0355), indicating that the 20-year traffic mix causes insignificant damage to the pavement. Similarly, the largest value of thickness for total equivalent coverages in Results Table 2 is much less than the COMFAA evaluation thickness at the evaluation CBR. Hence, it is necessary to use an unrealistic allowable gross weight for the critical aircraft to compute PCN. Using the regular COMFAA procedure without adjustment, the airport could report PCN=97/F/C/X/T for this pavement. However, this PCN is based on an unrealistically high allowable gross weight for the B747-400 (1,060,338 lbs.).

Figure C-9. Screen Shot of Flexible PCN Tab in COMFAA Support Spreadsheet for Computing Equivalent Pavement Structure in Flexible Example 4. The structure is the same as Example 1, but with a 2-inch HMA overlay, for a total P-401 thickness of 7 inches.

Continue reading ↓ 120 of 182 passages shown