Radar Vectors
FAA Order Cancelled Issued Dec 8, 2010 AAM-800 88 pages Copy saved Nov 18, 2026

Order 9120.1B Drug and Alcohol Compliance and Enforcement Inspector Handbook

This document is cancelled. Cancelled by 9120.1C. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (1 of 88 pages). Check the original, as some words may be misread.

Posted Appendix B.pdf

Distribution: A-WXY (Drug Abatement)-3 Initiated By: AAM-820

Effective Date:

12/08/2010

Aerospace Medicine Policy

ORDER

9120.1B

SUBJ : Drug and Alcohol Compliance and Enforcement Inspector Handbook

The Federal Aviation Administration (FAA), Office of Aerospace Medicine (AAM) has prepared this order for Drug Abatement Division (AAM-800) personnel to follow when inspecting and investigating the drug and alcohol testing program of aviation industry employers, contractors, and individuals for compliance with the provisions of 49 CFR part 40, “Procedures for Transportation Workplace Drug Testing Programs;” and 14 CFR part 120, “Drug and Alcohol Testing Program.” Unless otherwise directed by the Drug Abatement Division Manager, inspectors and investigators must adhere to the procedures in this order. The FAA invites comments and suggestions from those who use the order. Input should be submitted to:

Federal Aviation Administration Office of Aerospace Medicine Drug Abatement Division (AAM-800) 800 Independence Avenue, S.W. Washington, D.C. 20591

Table of Contents Chapter 1. General Information 1. Purpose of this Order … 4 2. Audience … 4 3. Where Can I Find this Order? … 4 4. What this Order Cancels … 4 5. Inspection Authority … 4 6. Objectives of the Inspection and Investigation Process … 4 7. Who Do We Inspect? … 4 Chapter 2. Inspections 1. General … 7 2. Inspection Scheduling … 7 3. Preparation for the Inspection … 10 4. Travel Requirements … 10 5. Inspection Work Plan … 11 6. Pre-Inspection Team Meetings … 11 7. On-Site Inspection Activities … 11 8. Evidence Collection … 17 9. Documentation of Inspection Results … 18 10. Inspection Conclusion … 19 11. Reporting Inspection Activities … 20 Figure 2-1 Inspection Schedule Sample … 23 Figure 2-2 Inspection Process Guide … 27 Figure 2-3. Inbriefing/Outbriefing Guide … 28 Figure 2-4. Meeting Attendance List … 29 Figure 2-5. Records Reviewed and Collected Guide … 30 Figure 2-6. Inspection Compliance Issue Guide … 31 Figure 2-7. Sample Certifications of Authenticity … 32 Figure 2-8. Return-to-Duty Process Flowchart … 33 Figure 2-9. Federal Drug Testing Custody and Control Form (CCF) Process Flowchart … 34 Figure 2-10. Employee Interview Guide … 35 Figure 2-11. Witness Statement Form … 37 Figure 2-12 Record of Interview … 39 Figure 2-13. Inspection Correspondence Flowchart … 40 Figure 2-14. Sample FOUO cover sheet … 41 Chapter 3. Investigation 1. General … 42 2. Sources of Allegations … 42 3. Investigations of a Company … 43 4. Investigations of Individuals Who Perform Safety-Sensitive Functions … 43 Chapter 4. Voluntary Disclosures 1. General … 44 2. Procedures … 44 Figure 4-1. Sample Inspector/Investigator Analysis … 47

Chapter 5. Administrative Information 1. Authority to Change this Order … 48 2. Background … 48 3. References … 48 Appendix A. Inspection Guide … A-1 Appendix B. Standard Operating Procedures (SOP) For Conducting Review of Service Agents ....B-1 Appendix C. Random Testing Job Aid … C-1 Appendix D. Acronyms … D-1 Appendix E. Inspection Scheduling Procedures … E-1

Chapter 1. General Information 1. Purpose of this Order. This order documents the procedures used by Federal Aviation Administration (FAA) drug and alcohol compliance and enforcement inspectors and investigators to assess the compliance of aviation industry employers with the requirements in the Code of Federal Regulations (CFR). Specifically, the regulatory requirements including the Department of Transportation’s (DOT) 49 CFR part 40, “Procedures for Transportation Workplace Drug and Alcohol Testing Programs;” the FAA’s 14 CFR part 120, “Drug and Alcohol Testing Program;” and other relevant Federal Aviation Regulations. This order is used in conjunction with FAA’s “Compliance and Enforcement Program” (Order 2150.3B) to ensure that inspections and investigations are conducted accurately, fairly, and consistently throughout the Drug Abatement Division. 2. Audience. All Drug Abatement Division personnel. 3. Where Can I Find this Order? You can find this order on the MyFAA Employee Web site: https://employees.faa.gov/tools_resources/orders_notices/.

This order is available to the public at http://rgl.faa.gov. 4. What this Order Cancels. This order cancels Order 9120.1A, FAA Anti-Drug Program Compliance Inspector Order, dated May 23, 2008. 5. Inspection Authority. The Omnibus Transportation Employee Testing Act of 1991 (49 USC §§ 45101-45107) and the FAA’s general statutory safety authority outlined in 49 USC §§ 106(g) and 44701 provide the authority to conduct the inspections and investigations described in this order. 6. Objectives of the Inspection and Investigation Process. Ensuring compliance with the drug and alcohol testing regulations is the primary objective of the inspection and investigation process. The safety of the traveling public and integrity of the inspection and investigation process form the foundation of every inspection. The regulations and the inspection and investigation processes balance the privacy interests of aviation employees with the safety mandate to detect and deter illegal drug use and alcohol misuse.

Inspections and investigations must be conducted in a constructive, ethical, unbiased, and professional manner. Implementation of the procedural safeguards within Federal regulations and this order will ensure these objectives. 7. Who Do We Inspect? We inspect the following entities in accordance with the drug and alcohol testing regulations, 14 CFR part 120, and 49 CFR part 40:

a. Employers. Part 40 defines an employer as “A person or entity employing one or more employees (including an individual who is self-employed) subject to DOT agency regulations requiring compliance with this part. The term includes an employer’s officers, representatives, and management personnel. Service agents are not employers for the purposes of this part.” Part 120 defines an employer as a part 119 certificate holder with authority to operate under parts 121 and/or 135; an operator as defined in 14 CFR § 91.147; or an air traffic control facility not operated by the FAA, or by or under contract for the U.S. Military.

(1) An employer must ensure that individuals hired to perform safety-sensitive functions, directly or by contract (including subcontract at any tier), are subject to drug and alcohol testing.

(2) Employers are responsible for all actions of its officials, representatives, and service agents in carrying out the requirements of the testing regulations.

b. Contractors. Part 120 defines a contractor as, “an individual or company that performs a safety-sensitive function by contract for an employer or another contractor.” There are two options for drug testing contractors: (1) The contractor obtains and implements its own drug and alcohol testing program. If the contractor chooses this option, it must implement the program as if it were the employer.

(2) The employer includes the contractor under its own drug and alcohol testing program.

c. Service Agents. Part 40 defines a service agent as, “Any person or entity, other than an employee of the employer, who provides services specified under this part to employers and/or employees in connection with DOT drug and alcohol testing requirements.”

(1) A Consortium/Third-Party Administrator (C/TPA) is a service agent that may implement all or portions of the testing program for an employer.

(2) Service agents may provide the following services:

(a) Urine drug collections, as specimen collectors (b) Breath alcohol testing, as breath alcohol technicians (BAT)

(c) Alcohol saliva testing, as screening test technicians (STT)

(d) Laboratory1

(e) Medical review officer (MRO) functions

(f) Substance abuse professional (SAP) functions (3) As part 40 prescribes, service agents are required to comply with all aspects of the regulations. The roles and responsibilities of a service agent are addressed under subpart Q of part 40. Inspections or investigations of any employer may include a review of its service agent’s practices and procedures. The employer is responsible for compliance with the regulations even when using a service agent. Therefore, a service agent’s failure to comply with the regulations may result in violations against the employer.

(4) A service agent may be subject to a public interest exclusion (PIE), as described under subpart R of part 40, for egregious violations of the regulations. If an inspection or investigation results in allegations of egregious violations of the regulations by a service agent, the inspector must immediately report this information to his/her Compliance and Enforcement (C&E) Center Manager. A determination of whether to initiate an inspection, investigation or PIE is determined by the C&E Center Manager in coordination with the Field Operations Branch Manager and the Division

1 The Department of Health and Human Services is responsible for monitoring certified laboratories.

Manager. If an inspection is initiated against the service agent, refer to appendix B of this order for further instructions.

Chapter 2. Inspection

1. General. A successful inspection entails accomplishing a sequence of five interrelated activities. This sequence begins with inspection scheduling; proceeds through detailed planning, completion of on-site inspection activities, and reporting of inspection results; and concludes with post-inspection follow-up activities. Inspections are executed according to this chapter and the procedures established under the Quality Management System (QMS) of the International Organization for Standardization (ISO) AAM-800-003. The Drug Abatement Division has established an Inspection Guide, which is found under appendix A of this order. The Guide must be followed by all inspectors and investigators during each inspection. Deviations from the Inspection Guide are strictly prohibited. The Compliance and Enforcement Tracking System (CETS) Reference List should be used to enter out of compliance issues or concerns into CETS. The CETS Reference List is available on the Drug Abatement Division (AAM-800) QMS Web Site. 2. Inspection Scheduling.

a. The FAA employs a variety of inspection activities to ensure companies comply with the drug and alcohol testing regulations. Prior to the beginning of the calendar year, the inspection weeks are published in CETS. Before every quarter, the Drug Abatement Division’s management team composes a quarterly inspection schedule based on ISO process AAM-800-004, Drug Abatement’s Strategic Compliance Monitoring Plan2 (SCMP), and recommendations from Division personnel. Once the priorities are set, a Field Operations Branch program assistant assembles the teams of companies and pre-inspection materials for the national inspection schedule. These procedures are found in appendix E of this order.

b. The C&E Center Managers and Field Operations Branch Manager are responsible for assigning inspectors to an inspection team and appointing the team’s inspection lead. When scheduling, the C&E Center Manager will identify whether the inspection is required to be comprehensive (full) or focused and announced or unannounced. Additionally, inspectors and investigators will be assigned to participate in high impact, special emphasis, and service agent inspections. Inspectors and investigators are required to access his/her schedule in CETS.

(1) Comprehensive (Full) Inspections. Comprehensive inspections are thorough reviews of all aspects of employers’ drug and alcohol testing program. Although we may sometimes focus emphasis on specific areas based on information concerning potential problems, the overall format of such inspections is standardized in accordance with this order. In some cases, the comprehensive inspection may be conducted without advance notice to the employer. The determination as to whether a comprehensive inspection will be announced or unannounced is made by the Drug Abatement Division, Field Operations Branch, or C&E Center Manager.

(2) Focused Inspections. Under certain circumstances, focused inspections, which are narrow or limited in scope, may be conducted in response to a specific problem. Problems may be

2 The Strategic Compliance Monitoring Plan (SCMP) is the Drug Abatement Division’s policy for scheduling inspections.

identified from any of a variety of information sources, including analyses of prior inspection results, annual testing reports, individual or union complaints, or other alternative means. For example, FAA headquarters may receive complaints concerning improper collection procedures. In that case, an inspection focusing on the employer’s collection procedures may be conducted. Focused inspections may involve a single employer or entity, as in the example above, or a representative group of employers if information indicates that a problem is widespread. A focused inspection must include the employer’s administrative and quality assurance activities and mandatory testing (i.e., preemployment, random, post-accident, reasonable cause/suspicion, return to duty, and follow-up). The determination as to whether a focused inspection will be announced or unannounced is made by the Drug Abatement Division, Field Operations Branch, or C&E Center Manager.

(3) Announced Inspections. An announced inspection requires advance notification to employers. This notification is accomplished by the program assistants assigned to the Field Operations Branch, in accordance with the procedures in appendix E of this order. The program assistant contacts the employer/contractor to inform them of a scheduled inspection and obtains information regarding their size. Upon receiving the necessary information, the program assistant sends the employer/contractor a letter of notification (LON), using the letter template contained in CETS, confirming the pending inspection. The LON is mailed or faxed, and is never permitted to be sent via electronic mail. The program assistant, following their procedures, must prepare the LON and attachment generated using the CETS template, and must also document the notification in CETS. The LON should be sent to the employer as far in advance as possible, but no later than two weeks before the inspection. In cases where an employer is added to an inspector's work schedule within the two-week period prior to the inspection week, the inspector should send the employer an LON as soon as possible.

(a) The LON package, sent by the program assistant, includes a list of records and documents necessary for inspection and a request for the employer’s points of contact. Upon completing the notification task, the program assistant provides a draft work plan to all team members, as well as their respective team coordinator and Center Manager.

(b) Prior to the inspection, the inspection lead ensures that the POC information has been received from the employer and updated in CETS. For larger entities that require a multi-day inspection, the lead inspector prepares the Inspection Schedule (found in Figure 2-1) and distributes it accordingly. During any pre-inspection contact with employers, inspectors should refrain from initiating an inspection prior to on-site arrival. All inspectors and investigators are strictly prohibited from coaching employers or distributing unauthorized documents to them at anytime.

(c) There may be instances in which an employer, after receiving an LON, will question the need for an inspection because it has ceased operations under 14 CFR § 119.63, but continues to hold a certificate (i.e., 121 or 135). Regardless of whether an employer that holds a certificate is exercising the privileges of its certificate, it must be available for inspection. If the employer advises the FAA that it has ceased its operations, the inspector/investigator must contact the employer’s Principal Operations Inspector (POI)/Principal Maintenance Inspector (PMI) to determine whether the employer has surrendered its certificate. That information must then be given to the C&E Center Manager for a determination as to whether the employer will be inspected. If an employer, which has ceased operations under 14 CFR § 119.63 but has retained its certificate, is unwilling to be inspected, it must contact its POI/PMI to surrender its certificate. The inspector/investigator must follow-up with the POI/PMI to ensure that this has been accomplished.

(4) Unannounced Inspections. Unannounced inspections are essential to an effective compliance program. Each inspector is responsible for conducting unannounced inspections during the fiscal year.

(a) C&E Center Managers may schedule an unannounced inspection for any inspector during any inspection week.

(b) Inspection teams may conduct an unscheduled,` unannounced inspection, as time allows, which require the inspector to locate employers/contractors or service agents in their assigned geographical areas.

(c) Preparations for unannounced inspections might include contact with the local Flight Standards District Office (FSDO) to ascertain that the employer is still operating and has an active certificate.

(d) Inspection leads inform the C&E Center Manager(s) and other teams in the geographical area, if possible, before conducting unscheduled inspections, to preclude multiple inspection attempts at the same employers/contractors.

(e) For all unannounced inspections, the inspection lead or team must not contact the employer in advance of the inspection.

(5) High Impact Inspections. High impact inspections are conducted by multiple teams of inspectors and investigators from two or more Drug Abatement offices during a one or two week period. This approach permits the concentration of inspector and investigator resources in a planned geographic area and maximizes visibility for the Drug Abatement Program. By involving inspectors and investigators from two or more offices, high impact inspections promote consistency within the inspection process and the application of the regulations, provide cross-training, and permit managers to directly observe and assess an inspector’s/investigator’s performance. During high impact inspection weeks, a meeting is scheduled for inspectors, investigators, and managers to meet and discuss program issues. These discussions provide management with topics to be covered in future inspector and investigator training or identify a need for guidance and/or policy development.

(6) Special Emphasis Inspections. Special emphasis inspections are defined as inspections that are scheduled to focus on one element of the regulations at a national level.

(7) Service Agent Inspections. Service agent inspections specifically focus on MROs, SAPs, C/TPAs, collectors, and BATs. Service agent inspections are independent inspections and are not related to a specific company inspection. The standard operating procedures (SOP) for service agent inspections are in Appendix B of this order.

(8) Inspection Schedule Changes and Cancellations. While all efforts are made to maintain the schedule as is, at times it is essential to the program to make necessary changes. All requests to change the final inspection schedule must be submitted through the C&E Center Manager to the Field Operations Branch Manager in Washington, DC. Once an inspector’s schedule is established, the inspection planning must begin. Prior to canceling an inspection, the inspector must

contact the C&E Center Manager. When a scheduled inspection is cancelled, the cancellation must be documented in CETS. 3. Preparation for the Inspection. The inspection lead is responsible for all planning of the assigned inspections. He/she has a critical role in accomplishing the goals of the inspection, ensuring that all critical aspects of an inspection, including planning and reporting, are accomplished according to established procedures (see inspection process guide in Figure 2-2).

a. The inspection lead examines CETS and the drug and alcohol enforcement history of each employer to find past noncompliance issues. This includes previous inspections and open or closed voluntary disclosures.

b. At a minimum, each inspection will include a review of mandatory testing records (i.e., pre- employment and random testing; positive drug tests, alcohol violations, and refusals) and the records specified in 49 CFR § 40.25. The inspection lead determines if additional areas require evaluation, based on the past enforcement history of the employer, such as previous investigations, voluntary disclosures, legal enforcement actions, etc.

c. Each team member must bring the following inspection tools:

(1) Copy of the regulations (2) Inspection guide (3) Forms (inbriefing/outbriefing sheet, witness form, Small Business Information) (4) Laptop (5) Evidence certification stamp (6) Office supplies (note pads, paper clips, stapler, etc.) d. The inspection lead notifies the C&E Center Manager if additional personnel are needed or if a comprehensive inspection is necessary.

e. Inspectors must ensure voluntary disclosure issues are addressed, as described in chapter 4 of this order.

4. Travel Requirements. Although the inspection lead is responsible for making travel arrangements, such as lodging and rental cars, for each of their assigned inspections, each inspector and investigator is responsible for adhering to the following travel requirements:

a. Inspectors and investigators must adhere to the FAA Travel Policy (FAATP), which is available on the FAA’s Employee Web site.

b. Whenever possible, inspectors and investigators will arrive in the inspection city at approximately the same time. All travel and lodging preparations must be confirmed at least one week prior to the inspection, unless precluded by schedule changes.

c. Inspectors and investigators will conserve time and fiscal resources. For instance, inspectors and investigators will lodge near inspection sites, when possible. The FAATP states, “You must exercise the same care in incurring expenses that a prudent person would exercise if traveling on personal business.” The Policy further states, “You are responsible for excess costs and any additional expenses that you incur for personal preference or convenience. FAA will not pay for excess costs resulting from circuitous routes, delays, or luxury accommodations or services unnecessary or unjustified in the performance of official business.”

d. Travel must be arranged so that inspections begin Monday at 1:00 PM and end at noon on Friday. Consequently, it may be necessary for the inspector/investigator to travel on the Sunday prior to and the Saturday after the inspection. 5. Inspection Work Plan. Each inspector must submit a final inspection work plan to the C&E Center Manager, Team Coordinator(s), and secretary/program assistant of his/her center no later than Wednesday of the week prior to inspections. The work plan will contain businesses to be inspected, along with their POCs and telephone numbers and hotel information. Service agent information will include the name of the employer associated with them. The work plan tool is available electronically on Drug Abatement Division (AAM-800) QMS website. 6. Pre-Inspection Team Meetings. The inspection lead will hold a meeting before the inspection to help ensure a smooth, professional inspection. These meetings must occur prior to arriving at the inspection site. During the pre-inspection team meeting, the inspection lead will:

a. Provide the past enforcement history of the employer to all members of the inspection team; b. Assign one or more of the following inspection areas to each inspection team member: Administrative and Quality Assurance; Collection Site Review; MRO Review; SAP Review; and specific areas for Record Review.

c. Establish his/her responsibility for the inbriefing, outbriefing, and CETS entry; and d. Confirm each inspection team member’s responsibility to inform the inspection lead immediately of any noncompliance issues and supporting evidence. 7. On-Site Inspection Activities. It is critical, and mandatory under ISO procedures, to ensure that each inspection is conducted according to the Drug Abatement Division’s inspection protocol. During each inspection, the following requirements must be adhered to:

a. Conduct. All division personnel will conduct themselves professionally and must:

(1) Maintain decorum in speech, dress, and behavior; (2) Treat their team members and employer representatives with respect;

(3) Avoid socializing with any individual associated with an employer’s inspection, including service agents, in accordance with the Ethics Regulations (5 CFR part 2635);

(4) Avoid discussing internal FAA activities, e.g., anticipated changes in policy, procedures, or rulemaking, with employers and service agents; (5) Avoid discussing pending enforcement matters pertaining to current or previous inspections and investigations; (6) Avoid conversations regarding other operators; and (7) Bring inspection issues to the attention of the inspection lead. b. Inbriefing. The inspection lead will conduct the inbriefing with the employer and the inspection team members (see inbriefing/outbriefing guide in Figure 2-3).

(1) The inspection lead makes introductions, circulates a sign-in sheet (see meeting attendance list in Figure 2-4), explains the inspection process and distributes the Small Business information (if applicable).

(2) At the conclusion of the inbriefing, the inspection lead should invite questions or comments from the employer and other inspection team members. c. Administrative and Quality Assurance Interview. At the conclusion of the inbriefing, the inspection lead announces the beginning of the interview phase with the company representative (program manager or designated employer representative (DER)) regarding the drug and alcohol testing program. To conduct the interview, each inspector must use the inspection guide found in appendix A. All information provided during the interview must be verified during the record review and evidence collection phase of the inspection.

d. Drug and Alcohol Testing Records Review. Records are the most common form of evidence used to verify the statements of the employer’s representative. As an example, an employer may provide the inspection team with a spreadsheet that includes dates of hire, transfer, and preemployment testing. The inspection team must verify the spreadsheet information by assembling the source documents (personnel action forms, custody and control forms (CCF), etc.) that pertain to each item on the spreadsheet. The inspection team must not request the employer to generate a spreadsheet for the purpose of the inspection.

(1) Inspection leads and team members will take part in record review activities and enter their findings in the inspection results section of CETS. Worksheets are available (see records reviewed and collected guide in Figure 2-5 and inspection compliance issue guide in Figure 2-6) to assist inspectors during record review and/or interview phases of the inspection.

(2) Inspectors/investigators are responsible for reviewing, copying, and certifying documents, as assigned by the inspection lead. The inspection lead must ensure each assigned portion of the review process is completed. Each inspector must initial the records review guide in the area of their assignments (see Part 2 of the inspection guide in appendix A) to demonstrate completion. The inspection lead will enter this information into the official inspection record in CETS.

(3) The inspector/investigator certifies a document by noting on the back of each page when, where, and from whom the document was obtained. This can be accomplished with the certification of authenticity (see Figure 2-7). Documents should be certified at the inspection site whenever possible.

(4) To the greatest extent possible, all testing records must be reviewed for the time period established by the C&E Center Manager and inspection lead prior to the inspection. Depending on the circumstances, the time periods may include the past two years, since the last inspection, or the last six months.

(5) Records to review and document, if applicable, include the following categories: (a) Positive Drug Test and Alcohol Violation Records. Inspectors/investigators must review all verified positive drug test results and alcohol violation results, except those that have already been investigated by the Special Investigations Branch (AAM-830) or should have been reported to AAM-830. Inspectors/investigators must also review the records that document the employee’s removal from a safety-sensitive function. The employer has the authority to terminate or rehabilitate the employee prior to his/her return to safety-sensitive functions. If the employee is returned to safety-sensitive functions, the inspection team must review all return-to-duty records. These records may include the SAP reports, SAP credentials, return-to-duty test result, and follow-up test results. If inspectors discover an individual has returned to work without completing the returnto-duty process, the inspector should address the company violation for not ensuring that the individual completed the return-to-duty process prior to allowing the individual to perform safety sensitive functions. Due to Privacy Act implications, inspectors must refrain from discussing an individual’s violation. Inspectors should forward a written statement regarding the individual’s violation and copies of any documents found to the Special Investigations Branch manager’s email address or 9-AWA-AVS-AAM-830/AWA/FAA.

(b) Part 67 Medical Certificate Holders. If the employer fails to report a refusal, a violation involving the misuse of alcohol, or a verified positive test result by a part 67 medical certificate holder to the Federal Air Surgeon (through the Drug Abatement Division), the inspection lead should forward a written statement regarding the violation and copies of any documents found to the Special Investigations Branch manager’s email address or 9-AWA-AVS-AAM-830/AWA/FAA. Inspectors must not investigate, comment, or discuss the alleged violation with the company or individual.

(c) Refusal Records. Inspectors must review all records concerning refusals to submit to testing, including walk-a-ways, adulterations, substitutions, etc., as defined in 49 CFR part 40. However, if the refusal was by an individual who holds a part 61, 63, 65, or 67 certificate, the matter must be referred to the Special Investigations Branch for investigation. Inspectors should forward a written statement regarding the individual’s violation and copies of any documents found to the Special Investigations Branch manager’s email address or 9-AWA- AVS-AAM-830/AWA/FAA. The employer has the authority to terminate or rehabilitate the employee prior to his/her return to safety-sensitive functions. If the employee is returned to safety-sensitive functions, the inspection team must also review all return-to-duty records. It is important that the Special Investigations Branch Manager be immediately notified about a

suspected failure on the part of the employer to report a refusal by an airman who holds a part 61, 63, or 65 FAA certificate.

(d) Return-to-Duty Testing Records. Return-to-duty tests are conducted prior to returning an employee to a safety-sensitive function after a verified positive drug test, an alcohol misuse violation, or a refusal. The objective of these tests is to ensure that those who have committed such violations are alcohol or drug-free prior to returning to the performance of safety-sensitive functions. These tests occur after the SAP reports that the individual has successfully complied with the prescribed education and/or treatment. Inspectors/investigators must conduct a thorough review of these records, including: (1) documentation of the triggering event (drug positive, alcohol misuse violation, or refusal to submit to testing), (2) SAP reports (initial and follow-up evaluations, including the follow-up testing schedule) and qualifications, (3) return-to-duty CCFs/breath alcohol testing forms and verified drug test results/confirmed alcohol test results, and (4) documentation that the employee was returned to safety-sensitive functions and placed into the random drug and alcohol testing pool. A flowchart of the return-toduty process is shown in Figure 2-8.

(e) Follow-up Testing Records. The SAP establishes a written follow-up testing plan after the individual successfully complies with his/her education and/or treatment. The required follow-up tests are conducted after an employee passes the return-to-duty test and has been returned to the performance of safety-sensitive functions. Similar to the return-to-duty testing, the objective of these tests is to ensure that individuals, who have committed violations involving the misuse of alcohol, a verified positive drug test result, or the refusal to submit to a drug or alcohol test, are compliant with the regulations governing the use of alcohol or prohibited drugs. Inspectors/investigators must conduct a thorough review of these records to ensure the CCFs/breath alcohol testing forms and verified drug test results/confirmed alcohol test results match the prescribed number of tests recommended by the SAP. Keep in mind that if the employee’s employment lapses during the follow-up testing plan (e.g., they are transferred to a non safety-sensitive position or furloughed), the “plan” picks back up upon their return to duty. If you are unsure, please contact your Center Manager or the Program Policy Branch Manager for further clarification.

(f) Pre-employment Testing Records. Pre-employment testing is directly tied to aviation safety, in that it is the gateway to safety-sensitive positions. Historically, preemployment testing has resulted in the highest rate of verified positive results, demonstrating that such tests are effective in detecting illegal drug use. Pre-employment alcohol testing is optional, but if an employer orders an alcohol pre-employment test for one potential hire, all other new hires/transfers to safety-sensitive functions must also be pre-employment alcohol tested. Preemployment testing records could include personnel position descriptions, personnel action forms, payroll records, internal company hiring and transfer reports, CCFs, and MRO reports. In addition to reviewing the records, the inspector/investigator should interview any individual whose records, if questionable, need to clarified or confirmed. Interviews may be the only evidence available to prove a hire/transfer date, or identify other evidence to be gathered, such as maintenance logs, flight logs, or other performance documentation showing the date safetysensitive functions were performed. Documentation of performance (whether actual or available to perform) would be used to show aggravating circumstances in an impending legal enforcement action.

(g) Random Testing Records. It is essential for inspectors and investigators to have thorough knowledge of what comprises a random testing program. Appendix C of this order further explores random testing regulations, including minimum annual rate, selection methodology, excusal policies and over-selection, notification and testing procedures, and testing frequency. Records that could be of use when inspecting an employer’s random testing program are: (1) random drug and alcohol selection lists, (2) a listing of who was, or is, in the random pool during the covered period, (3) documentation that employees in the pool perform safetysensitive functions, (4) dates employees were added or deleted, (5) notification procedures, including notifications to out-lying locations, (6) documentation of whether employees proceeded immediately to the collection site after notification of selection, (7) CCFs, (8) verified drug test results, (9) breath alcohol testing forms with the alcohol test results, and (10) verification that the employer is satisfying the minimum testing rate that is published in the Federal Register.

(h) Reasonable Cause/Reasonable Suspicion Testing Records. Reasonable cause/suspicion testing is critical in the detection of employees reporting for or performing duties while under the influence of drugs and/or alcohol. Employers/contractors must ensure that supervisors are trained to make a testing determination. Inspectors/investigators must review all reasonable cause/suspicion testing records, including: (1) documentation of the event that led to testing (if available), (2) documentation of supervisory training and the material covered, (3) CCFs, (4) verified drug test results, and (5) breath alcohol testing forms with the alcohol test results.

(i) Post-Accident Testing Records. A post-accident test occurs when an employee’s performance may have contributed to an aviation accident or cannot be completely discounted as a contributing factor to the accident. Inspectors/investigators must review all post-accident testing records including: (1) documentation of the accident, (2) information regarding the circumstances that led to the determination whether or not to test the employee, (3) CCFs, (4) verified drug test results, (5) breath alcohol testing forms with the alcohol test results, (6) documentation on why alcohol testing was not conducted within 2 hours and/or 8 hours of the accident, and (7) documentation that drug testing was conducted within 32 hours of the accident.

(j) Drug and Alcohol Records Check. Inspectors/investigators must examine all drug/alcohol records check forms during inspections, e.g., records relating to 49 CFR § 40.25(j), regarding whether applicants for safety-sensitive functions had a previous positive test result or refusal at another DOT employer during the past two years. When reviewing an employer’s requests for drug and alcohol records, inspectors/investigators must ensure that the employer has made a good faith effort to obtain the records. Sending the request to a previous employer and not making a good faith effort (which includes an additional attempt) to obtain the information is unacceptable. Furthermore, failing to remove the employee from duty after thirty days is a violation of 49 CFR part 40. In addition, the inspectors/investigators should make all attempts to interview any individual whose records need to be clarified.

e. Other Elements of an Inspection. In addition to the above elements, the inspection is divided into the following remaining sections:

(1) Collector and BAT. Collector and BAT inspections may include:

(a) A simulated collection for both drug and alcohol (see Figure 2-9 for a description of the CCF process). It is important that the inspection lead clearly explain to the collector and/or BAT that the simulated collection should be treated as a real DOT collection. The inspector should not interrupt the process or provide feedback until the conclusion of the simulation.

(b) Review of collector, STT, and BAT records pertaining to qualification training and proficiency demonstration;

(c) Review of CCFs and alcohol testing forms; (d) Review of areas of noncompliance or concerns noted in previous inspections; (e) Inspection of all of the employer’s collection sites, which may include a medical facility, a mobile facility (e.g., a van), a dedicated collection facility, or any other location that meets the requirements of the regulation; and

(f) Records of equipment checks and calibrations.

(2) MRO. MRO evaluations may include:

(a) An interview with the MRO to verify his/her knowledge of the regulations; (b) Records pertaining to credentials, qualification and requalification training; and (c) A check of one or more of the following organizations to ensure the MRO is licensed, trained or certified:

(i) American Association of Medical Review Officer (AAMRO) at www.aamro.com, (ii) Medical Review Officer Certification Council (MROCC) at www.mrocc.org, (iii) American College of Occupational and Environmental Medicine (ACOEM) at www.acoem.org, (iv) American Society of Addiction Medicine (ASAM) at www.asam.org, (v) American Medical Association (AMA) at www.ama-assn.org, or (vi) American Board of Medical Specialties (ABMS) at www.abms.org. (d) Records pertaining to non-negatives (such as positives, refusals, and invalid tests) and negatives.

(e) Verification that the MRO is conducting the required 5% quality check of negative drug test results.

(3) SAP. SAP evaluations must include:

(a) The SAP's records pertaining to credentials, qualification training, and continuing education; and

(b) A check of one or more of the organizations referenced on the ODAPC Web site link for Substance Abuse Professionals (http://www.dot.gov/ost/dapc/industry_links.html?prog).

(c) Records for compliance with the return-to-duty requirements.

f. Service Agent Issues Discovered. If any collector, laboratory, MRO, or SAP issues/discrepancies are discovered, regardless of the employer, the inspector/investigator should collect all the evidence and report to the C&E Center Manager. Any egregious noncompliance discoveries should be reported to the C&E Center Manager, who then notifies the Special Investigations Branch Manager. 8. Evidence Collection. Evidence collection is the most critical element of the inspection. Inspectors/investigators must review all evidence relevant to an alleged noncompliance issue whether it proves or disproves a suspected item of noncompliance by the employer. Inspectors/investigators should gather all evidence available of violation(s), not just a single instance. This evidence must answer the questions about what happened, who was involved, and where, when, and why it occurred. The following describes different types of evidence and how each type of evidence should be handled, as described in Order 2150.3B.

a. Physical evidence consists of tangible objects, such as specimen collection materials or computer software programs relating to random testing. Inspectors/investigators must exercise care in handling physical evidence so that damage, loss, or alteration does not occur.

b. Witness interviews may be used to prove noncompliance and may be helpful in leading the inspector/investigator to other people who have direct knowledge or documentation of the issue.

(1) When possible, interview all witnesses who may be aware of a noncompliance issue.

(2) Witness accounts should be written and signed by the author, who may be the witness or the inspector/investigator. Witnesses should be informed that they are not under oath.

(3) The interview must be conducted in a professional manner with consideration for the following (see employee interview guide in Figure 2-10 and witness statement in Figure 2-11):

(a) Plan the interview and questions in advance.

(b) Be attentive and take notes.

(c) Maintain control of the interview.

(d) Ask direct, relevant, and open-ended questions.

(e) Request a signed and dated statement.

(4) Inspectors and investigators will prepare a record of interview when outlining the interview/conversation conducted with witnesses or alleged violators (Note: The record of interview job aid is located in Appendix A (Figure A-3) of FAA Order 2150.3B). It should only state what the witness provided and it must not include the inspector’s/investigator’s personal views and/or opinions. A record of interview is necessary if a witness declines to provide a statement. Inspectors/investigators are encouraged to try to obtain witness statements that are written, signed, and dated by the interviewee. If the interviewee is unwilling to write his or her own statement, the inspector/investigator should write the interviewee’s statement and then ask the interviewee to review it for accuracy and sign and date it. If the interviewee is unwilling to do any of the above, the inspector/investigator should write the interviewee’s statement as an inspector/investigator statement and ask the interviewee to review the statement to ensure its accuracy. In the last circumstance, the inspector/investigator should document that the interviewee either affirmed the accuracy of the statement or declined to do so and that the interviewee refused to sign the statement. (For more information concerning witness interviews and statements, see FAA Order 2150.3B, chap. 4, para. 10.c. (2)-(9).)

(5) Inspector/investigator statements (see record of interview in Figure 2-12) are used to document findings that are not available in witness statements, technical publications, logbooks, and manuals, etc. They are also used to document a violation that is observed by the inspector/investigator or to capture an interview when a witness is unwilling to sign a record of interview. Inspector/investigator statements must include the date, time, location, and contact information of those present. They must be personally signed and dated by the inspector/investigator and must not include his/her personal views and/or opinions.

9. Documentation of Inspection Results. In preparation for the outbriefing, each inspection lead will, as soon as possible, enter his/her documentation of the inspection results into CETS. The following documentation must be entered into CETS in full detail:

a. Update of Company Profile. Any new information concerning the company, such as additional locations, company representatives, service agents, etc., must be added to its profile.

b. Outcome of Areas Reviewed and Discovered Issues. The results of an inspection should be noted with the following:

(1) Out-of-compliance items are noted when it is established that an alleged violation occurred. It is not sufficient to document only a few noncompliance items to show a pattern. All discovered issues must be documented, including stale issues. For example, if one checklist item was out of compliance on multiple occasions, then each occasion must be listed. Documentation of each out-of-compliance item must include a full description of what happened, who was involved, where and when it occurred, and any information on why it occurred.

(2) Concerns are noted when there are issues discovered that are not a violation, but may lead to a violation if the employer and/or service agent fails to resolve the issue. For example, if a collector has never dealt with a shy-bladder situation, he/she may be asked to explain the shy-bladder procedures as described in 49 CFR § 40.193. If the collector is unfamiliar with these procedures, this will be noted as an area of concern.

(3) Open items are noted when the issue cannot be resolved without clarification from management, or the team cannot agree on a specific item during the inspection. These items are revisited after a determination is made in coordination with the C&E Center Manager and the inspection lead. 10. Inspection Conclusion. The inspection lead will meet with the inspection team to assure that all applicable items on the inspection guide were covered and appropriate documentation was gathered, in accordance with this chapter. At this time the team will review and agree on all issues of noncompliance, concerns, or open items. If there is disagreement between the team on a particular item(s), the inspection lead must inform the employer at the outbriefing that the item(s) will be left open and addressed later. The inspection lead should document the inspection results in CETS prior to the outbriefing, if possible.

a. Outbriefing. The inspection lead is responsible for the outbriefing (see the inbriefing/outbriefing guide in Figure 2-3).

(1) All members of the inspection team should attend and actively participate. (2) The inspection lead circulates the sign-in sheet for those individuals who were not part of the inbriefing (see meeting attendance list in Figure 2-4).

(3) If the inspection resulted in no items of noncompliance, the inspection lead should advise the company representative that no further documentation will be received.

(4) When an inspection results in findings of noncompliance and/or concerns, the inspection lead must clearly and briefly identify the items discovered during the inspection. Do not linger on the issues, but explain it and obtain the employers agreement to initiate an immediate corrective action to be taken by a specific date.

(5) If there are unclear items that need to be resolved with the company that were not clarified during the actual inspection, the inspection lead should do this during the outbriefing. Similarly, the inspection lead should also use this opportunity to clarify any misunderstandings about the regulations. Remember not to linger on the topic, but be clear and concise.

(6) Inspectors/investigators must not discuss any possible enforcement actions related to the inspection or display any disagreement on the issues.

(7) The inspection team should not tell the company/DER how to respond to the alleged violations. It is up to the company to decide on how to take corrective action.

b. Following the outbriefing, the inspection team should gather all records and materials and leave the company.

(1) Do not leave anything behind, for instance, papers, folders, extraneous copies of documents.

(2) It is not appropriate to socialize with employers’ representatives or service agents, as this might give the appearance of a conflict of interest.

c. The inspection lead must hold a post-inspection meeting with the inspectors/investigators to discuss lessons learned and to ascertain that all documentation has been gathered and certified. If the outbriefing report has already been entered into CETS, the inspection lead should have each inspector/investigator approve and initial the outbriefing report. 11. Reporting Inspection Activities.

a. No later than 4 in-office working days after the inspection, each inspection lead must ensure that the information gathered is entered into CETS thoroughly and accurately. Specifically:

(1) Resources tab (i.e., date and time of inspection); (2) Updates to company information (i.e., contacts, locations, etc.); (3) Identifying out-of-compliance items, areas of concern, and undecided items; (4) Violation description(s); (5) Evidence collected; (6) Programs tab (i.e., drug and alcohol program self-administered or C/TPA and random protocol information); and

(7) Interviews (all interviewees identified and a synopsis of their statements).

b. When an inspection results in no items of noncompliance, this is indicated in CETS and no further correspondence is sent to the employer.

c. When an inspection item results in a counseling, the inspector does this verbally while onsite. The counseling should meet the requirements of Order 2150.3B, as amended, and be documented in CETS. If written counseling is necessary, the inspector/investigator should contact their Branch or C&E Center Manager for further instructions.

d. When an inspection identifies items of noncompliance, further correspondence is prepared by the inspection lead using CETS (see inspection correspondence flowchart in Figure 2-13).

(1) Outbriefing Report. The inspection lead is responsible for entering the noncompliance items in CETS and generating the outbriefing report. The inspection lead must obtain concurrence with the inspection team on the outbriefing report prior to generating the letter of investigation.

(2) Letter of Investigation (LOI). When an inspection results in an LOI, it must be prepared using the letter template contained in CETS. This will generate an enforcement investigative report (EIR) file number. The LOI, which is the first step in preparing an EIR, must describe the items of noncompliance. The inspection lead must provide a draft LOI and the outbriefing report to the Team Coordinator and/or C&E Center Manager within 4 in-office working days of returning from the inspection. The LOI and outbriefing report are either returned to the inspection lead for changes or approved. If the correspondence is returned to the inspection lead for changes, the review is

documented under the Milestones Section in CETS and the process begins again. After the Team Coordinator and/or C&E Center Manager approve the LOI, he/she must enter the final sign-off into CETS and submit the 2150-5 into EIS in accordance with the Team Coordinator/C&E Center Manager Standards. The LOI is then sent to the company through United States Postal Service (USPS) mail, certified return receipt. Electronic mail is not authorized. The inspection lead prepares the 2150-5 form, except for the final action, and enters it into the EIS through CETS.

(3) "Please Provide" Letter. In the event the employer does not respond to the LOI within the 10 days, the inspector should advise their Center Manager to determine whether further correspondence is warranted. If it is, the inspection lead must prepare the correspondence using the ‘Please Provide’ template from the Drug Abatement Division (AAM-800) QMS Web Site. It is the employer's last chance to respond before the inspector prepares an EIR.

(4) Enforcement Decision Process (EDP). Once the LOI response is received, the inspection lead must determine the appropriate type of enforcement action to be taken by using the EDP, which is explained in the October 23, 2009, change to Appendix F of FAA Order 2150.3B.

Taking the most egregious out of compliance issue, the inspection lead must evaluate the administrative or informal criteria list found in Appendix F of Order 2150.3B and on the Drug Abatement Division’s EDP Worksheet (contained in CETS). If the issue does NOT meet all the administrative or informal criteria, the inspector or investigator must proceed with legal enforcement action (as described below). Once legal enforcement action is deemed appropriate, all out of compliance issues must be addressed in the legal enforcement report. If the most egregious out of compliance item meets the administrative criteria, all out of compliance issues are addressed administratively. If the evidence gathered during the inspection will not support an administrative or a legal enforcement action, the inspection lead would recommend that no action is taken. The inspection lead should discuss his/her recommended action with the Team Coordinator or C&E Center Manager. The worksheet for all Drug Abatement Division cases is contained in CETS. No other EDP form may be used.

(5) Administrative Action. Using the letter template contained in CETS, a letter of correction (LOC) or warning notice (WN) is used when an administrative action is appropriate. An LOC serves the same purpose as a WN, except the LOC is used when there is agreement with the company that corrective action acceptable to the FAA has been taken, or will be taken, within a reasonable time. The inspection lead must provide a draft of the LOC/WN to the Team Coordinator and/or C&E Center Manager within 60 calendar days from the date of inspection. The LOC/WN is either returned to the inspection lead for changes or approved. If it’s returned for changes, the review is documented under the Milestones Section in CETS and the process begins again. After the Team Coordinator and/or C&E Center Manager approves the LOC/WN, he/she must enter the final sign-off into CETS, submit the 2150-5 to EIS, and print and sign the 2150-5 in accordance with Team Coordinator/C&E Center Manager Standards. The LOC/WN is sent to the company through USPS mail, certified return receipt. Electronic mail is not authorized. The inspection lead prepares the final assembled inspection file for archiving. Through all steps, each person who reviews the file (i.e., Inspection Lead or Investigator, Team Coordinator or Center Manager) must sign and date the EDP worksheet.

(6) Legal Enforcement Action. Legal enforcement action includes circumstances where serious safety issues are involved or there is a pattern of noncompliance that indicates an inability or unwillingness to comply with regulatory requirements. The Team Coordinator and/or C&E Center Manager should be consulted before preparing a legal enforcement report. Legal enforcement actions may include civil penalties or certificate actions. All follow-up activities are entered into CETS. Using CETS, the inspection lead must generate the legal case and provide it to the Team Coordinator and/or C&E Center Manager within 60 calendar days from the date of inspection. The legal enforcement report is either returned to the inspection lead for changes or approved. If it’s returned for changes, the review is documented under the Milestones Section in CETS and the process begins again. After the Team Coordinator and/or C&E Center Manager approves the legal enforcement report, he/she must enter the final sign-off into CETS in accordance with Team Coordinator/C&E Center Manager Standards.

Once the legal enforcement report is approved, the Team Coordinator or C&E Center Manager enters into CETS the date that it was sent to the Field Operations Branch (AAM-802). Through all steps, each person who reviews the file (i.e., Inspection Lead or Investigator, Team Coordinator, Center Manager, Field Operations Branch and Attorney) must sign and date the EDP worksheet. A complete, tabbed copy of the legal enforcement action must be retained in the field office. The FAA’s Compliance and Enforcement Program Order 2150.3B remains the source for inspection and investigation reporting and processing of enforcement activities. Please ensure that you continue to follow the requirements of Order 1600.75 involving “For Official Use Only” (FOUO) designations (see sample FOUO cover sheet in Figure 2-14), and our Drug and Alcohol Compliance and Enforcement Inspector Handbook, Order 9120.1B.

(7) No Action. The inspection lead will close out an issue with no action when there is insufficient evidence to prove the alleged violation. The lead inspector will also close out an issue with no action when the alleged violation is untimely under applicable time limitation for legal enforcement actions (see FAA Order 2150.3B, chap. 4, para. 5 and 6). Either situation will result in the issuance of a no action letter using the letter template contained in CETS. The inspection lead must provide a draft of the no action letter to the Team Coordinator and/or C&E Center Manager within 60 calendar days from the date of inspection. The no action letter is either returned to the inspection lead for changes or approved. If it’s returned for changes, the review is documented under the Milestones Section in CETS and the process begins again. After the Team Coordinator and/or C&E Center Manager approves the no action letter, he/she must enter the final sign-off into CETS, submit the 2150-5 to EIS, and print and sign the 2150-5 in accordance with Team Coordinator/C&E Center Manager Standards. The letter is sent to the company through USPS mail, certified return receipt. Electronic mail is not authorized. The inspection lead prepares the 2150-5 form, including the final action, into the EIS through CETS.

e. The inspection lead ensures that all follow-up activities are entered into CETS. He/she must also ensure that any follow-up information, such as documentation of corrective action by the employer, and incoming and outgoing communication, is obtained and documented in CETS.

Figure 2-1. Inspection Schedule Sample

Inspection Schedule*

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

This sample should be used for multiple day inspections.

Inspection Schedule*

Day 1 October 31, 2005

FAA INSPECTION LEAD: John King, Phone Number: (202) 355-6000.

Employer Name: One Twenty One Airways, Inc.

Employer POC: Brian Smith, Phone Number: (703) 111-2222

Time Activity FAA Staff Employer Staff

1:00-1:45 PM 1:50-3:00 PM 3:10 –4:45 PM 4:45-5:00PM

Inbrief Q & A Review of Records Wrap up

Lead: J. King Lead: J. King Lead: J. King Lead: J. King

Brian Smith and other company representatives as determined by the company.

Inspection Schedule

Figure 2-1. Inspection Schedule Sample (cont’d)

Inspection Schedule

Day 2 November 1, 2005

FAA INSPECTION LEAD: John King, Phone Number: (202) 355-6000.

Employer Name: One Twenty One Airways, Inc.

Employer POC: Brian Smith, Phone Number: (703) 111-2222

Time Activity FAA Staff Employer Staff

8:30-10:45 AM 11:00- 12:30 PM 12:30-1:30 PM 1:30-2:30 PM 2:45-4:45 PM 4:45-5:00 PM

Inspect Collection Site Inspect MRO Lunch Inspect MRO Inspect SAP Wrap Up

Lead: J. King Lead: B. Queen Lead: B. Queen Lead: R. Knight Lead: J. King

ABC Collections, Ms. Lee Dr. Roberts Larry Esquire

Figure 2-1. Inspection Schedule Sample (cont’d)

Inspection Schedule

Day 3-4 November 2-3, 2005

FAA INSPECTION LEAD: John King, Phone Number: (202) 355-6000.

Employer Name: One Twenty One Airways, Inc.

Employer POC: Brian Smith, Phone Number: (703) 111-2222

Time Activity FAA Staff Employer Staff

8:30-12:30PM 12:30 –1:30PM 1:30 – 4:45PM 4:45-5:00PM

Review of Records Lunch Review of Records Wrap up

Lead: J. King Lead: J. King Lead: J. King

Brian Smith and other company representatives as determined by the company.

Figure 2-1. Inspection Schedule Sample (cont’d)

Inspection Schedule

Day 5 November 4, 2005

FAA INSPECTION LEAD: John King, Phone Number: (202) 355-6000.

Employer Name: One Twenty One Airways, Inc.

Employer POC: Brian Smith, Phone Number: (703) 111-2222

Time Activity FAA Staff Employer Staff

8:30-11:30PM 11:30 –12:30PM

Review of Records Outbriefing

Lead: J. King Lead: J. King

Brian Smith and other company representatives as determined by the company.

Inspection Schedule › Post-Inspection

Figure 2-2. Inspection Process Guide

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

Pre-Inspection ___ Confirm date of inspection and logistical

arrangements with employer. ___ Ensure documentation is received from employer.

___ Research enforcement history.

___ Provide history to team. ___ Notify C&E Center Manager if additional

resources are needed.

___ Provide travel and lodging info to team.

___ Ensure that appropriate management representatives will be available to discuss: ___ Employer Administrative and Quality Assurance Activities ___ Specimen Collection ___ Breath Alcohol Testing Procedures ___ Medical Review Officer Activities ___ Substance Abuse Professional Activities ___ Drug Testing and Alcohol Information, Training, and Referral ___ Recordkeeping and Reporting ___ Ensure relevant documents will be available. ___ Complete inspection plan and assign areas of

responsibility to team members. ___ Submit completed work plan to C&E Center

Manager, Team Coordinator(s), and secretary/program assistant.

Inspection ___ Conduct initial team meeting. ___ Coordinate inspection team members’ activities

during the inspection. ___ Conduct inspection using the Inspection Lead Guide.

___ Conduct review meetings with team

members during inspection and prior to outbriefing. ___ Contact C&E Center Manager if team is

undecided about issues during the review process. ___ Interview safety-sensitive employees, if possible. ___ Ensure that all evidence is gathered,

verified, & certified during the on-site inspection. ___ Document findings in CETS (if possible). ___ Conduct final team meeting to discuss good

points, problem areas, and lessons learned. Post-Inspection ___ Enter inspection activity and follow-up

actions in CETS. ___ Team members concur. ___ Forward documentation to C&E Center

Manager/Team Coordinator for final review and approval. ___ Send correspondence to employer as

appropriate and track corrective actions. ___ Update CETS as activities occur. ___ Prepare and process enforcement actions

(legal and administrative). ___Close out or complete CETS record.

Post-Inspection › Outbriefing

Figure 2-3. Inbriefing/Outbriefing Guide

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

Inbriefing … Introduce team members to employer representatives and circulate a sign-in sheet. … Explain the purpose and scope of the inspection. … Review the inspection schedule. … Confirm employer POCs, C/TPAs and document/record locations. … Inquire about availability of restroom location, copier use and meeting room. … Describe the outbriefing that is to be held at the end of the inspection. … Distribute Small Business Notice, if applicable. … Advise end of inbriefing and allow opportunity for non-participants to leave. Outbriefing … Thank employer for cooperation and assistance, as applicable, and circulate the sign-in sheet. … Inspection lead may request that employer hold questions and comments until end of briefing. … If there are no out-of-compliance issues, advise employer that this concludes the inspection and

there will be no further correspondence. … Review scope of inspection and activities conducted and state that there will be a written follow-up

to the inspection. Describe review process, but do not discuss possible enforcement. … Describe items that are allegedly out of compliance with the regulations. Negotiate a time limit

with the employer for completing corrective actions. … Review any open items, if applicable. … State areas of concern, if applicable.

Close inspection and depart facility immediately. Do not leave any written inspection materials or evidence behind.

Figure 2-4. Meeting Attendance List

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

MEETING ATTENDANCE LIST

Company: … Date: …

Name

Title/Organization

Telephone

Number

Email Address

Attendance In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

In briefing

Out briefing

Figure 2-5. Records Reviewed and Collected Guide

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

The following guide may be used as a tool during the pre-employment record review portion of the inspection/investigation. This document is

only to help organize your results of the inspection and is not meant to be evidence to support a violation.

At the conclusion of the inspection, the inspection lead must ensure that all inspection results are captured in CETS. At that time, this document

must be destroyed and not maintained as part of the record. The CETS record is the official documentation of the inspection.

Employee Name and

Number Job

Category Hire/

Transfer

Date

Date of

Collection Date

Result

Verified

Did the

Employee

Perform?

40.25 and ‘J’ Completed? Remarks

Please do not change this document without approval. All recommendations for improvement should be sent through your manager to the

Program Policy Branch Manager.

30

XX/XX/2010 9120.1B Figure 2-6. Inspection Compliance Issue Guide

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

The following guide may be used while onsite at the inspection to help document issues discovered during your review of the records or following an interview with a witness. At the conclusion of the inspection, the inspection lead must ensure that all inspection results are captured in CETS. At that time, these documents must be destroyed and not maintained as part of the record. The CETS record is the official documentation of the inspection. Regulation Citation(s): Checklist Item Number(s): Brief Statement of Issue: Company failed to Or Company conducted … Evidence Collected:

Please do not change this document without approval. All recommendations for improvement

should be sent through your manager to the Program Policy Branch Manager.

XX/XX/2010 9120.1B

Figure 2-7. Sample Certifications of Authenticity

1. Documents copied from originals held by individuals or companies: I certify that this is a true and accurate copy of the original {insert description of document} held by {insert name of source}. … {Name of FAA Investigative Personnel} 2. Documents secured by FAA Investigative Personnel from sources outside the FAA upon request: I certify that this copy of {insert description of document} was provided to me upon request by {insert name of source}. … {Name of FAA Investigative Personnel} 3. Photographs either taken or secured by FAA Investigative Personnel: I certify that this photograph fairly and accurately depicts {describe the image of the photograph} on {insert date and time it was taken}. … {Name of FAA Investigative Personnel} 4. Faxed documents from sources outside the FAA: I certify that this copy of {insert description of document} was received by fax {insert name of source}. … {Name of FAA Investigative Personnel}

Please do not change this document without approval. All recommendations for improvement

should be sent through your manager to the Program Policy Branch Manager.

Figure 2-8. Return-to-Duty Process Flowchart

Figure 2-9. Federal Drug Testing Custody and Control Form (CCF) Process Flowchart

Figure 2-10. Employee Interview Guide

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

Employer … Date/Time … Interviewer Name … Employee Name … Employee Job Title … Length of Service with Employer … Total Experience … This interview is voluntary. Its purpose is to help evaluate the drug and alcohol testing program mandated by the FAA. What type of work do you do and when were you hired? Explain your duties/assignments. Are you a supervisor? When did you first perform safety-sensitive duties? Have you submitted to any drug tests? When? If a pre-employment test is not mentioned, ask: Did you have a pre-employment drug test? When? If the employee cannot recall when he/she received a pre-employment test, ask: Was this before or after you first performed safety-sensitive functions? Do you know how your name was selected for a drug test or tests after you were hired? After you were notified of your selection, when did you have to appear for your test? Have you submitted to any alcohol tests? When? After you were notified of your selection, when did you have to appear for your test? Have you received training regarding the drug and alcohol testing program of your employer? What are some of the effects and consequences of drug use on personal health, safety, and the work environment?

Figure 2-10. Employee Interview Guide (cont’d)

Can you name some of the behavioral indicators that may indicate drug use? What are some of the effects and consequences of abusing alcohol on personal health, safety, and the work environment? Can you name some of the behavioral indicators that may indicate alcohol abuse? Have you received any informational materials on the drug and alcohol testing program? If so, what types of materials have you received? Have you received a community service hotline telephone number for employee assistance? If so, when and where did you receive the number? Have you received a copy of your employer’s policy regarding drug use in the workplace? (When interviewing Supervisors Only)

Have you received training concerning reasonable cause and reasonable suspicion testing? Describe the training you received. When did you receive this training? How often have you received training? When was the last time you received this training? Did the training include specific contemporary physical, behavioral, and performance indicators of drug and alcohol use? How long was the training? (If necessary, ask:) Was the training at least 60 minutes in length for both the alcohol and drug portions? Do you have any general comments, concerns, or complaints regarding the drug and alcohol testing

program?

Figure 2-11. Witness Statement Form

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

Inspection Witness Statement Form

(PRINT)

Name of Employer or C/TPA: … Witness Name: … Date: … Mailing Address: … Time: … Telephone:(Home) … (Work) … Place: … Inspector’s/Investigator’s Name: … Others Present: … Narrative: Witness Signature: … Date: … Signature(s) of others present … , … , … Inspector/Investigator Signature: … Page ____of …

Figure 2-11. Witness Statement Form (cont’d)

Witness Statement Form (cont’d)

(PRINT)

Witness Name: … Date: …

Narrative:

Witness Signature: … Date: …

Inspector/Investigator Signature: … Page … of …

Figure 2-12 – Record of Interview

This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

INTERVIEW NARRATIVE

Record of Interview

Federal Aviation Administration Office of Aerospace Medicine EIR#

INTERVIEW SUBJECT

Name: Telephone:

Position: Address:

Date/Time of Interview:

INTERVIEW NARRATIVE

FOR OFFICIAL USE ONLY Public availability to be determined under 5 USC 552

Figure 2-13. Inspection Correspondence Flowchart

Figure 2-14. Sample FOUO Coversheet

Use to safeguard Unclassified Information which requires protection under FAA Order 1600.75

When separated from material this cover sheet requires no protection

COVER SHEET

FOR OFFICIAL

USE ONLY

MATERIAL ATTACHED

41 This document may be duplicated and used with black and white text

Chapter 3. Investigations

1. General. All Drug Abatement Division activities involve some element of an investigation in which the facts of an issue are examined. The majority of these investigations pertain to alleged violations of the drug and alcohol testing regulations by companies or individuals who perform safety-sensitive functions. The purpose of these investigations is to determine whether a violation exists and warrants the need for legal enforcement action (i.e., civil penalty or certificate action) or administrative action (i.e., WN or LOC) to ensure future compliance with the drug and alcohol testing regulations.

a. Each inspector/investigator is responsible for reporting all alleged violations to his/her manager. Based on the source and subject of the alleged violation, the investigation will be conducted by an inspector in the field or an investigator in the Special Investigations Branch (AAM-830).

b. Investigations are categorized as investigations of a company (i.e., employers, contractors, service agents) or investigations of individuals who perform safety-sensitive functions. This chapter will describe the sources of allegations, categories of investigations, and the Branch or C&E Center responsible for the investigation.

2. Sources of Allegations. An allegation may come from any of the following sources: FAA Aviation Safety Hotline, noncompliance transmittals (NCT), Congressional inquiries, refusal reports, part 67 reports, and complaints. Under each company’s profile in CETS, there is a tab titled “Special Issues.” This tab allows for the documentation of the source and allows for the initiation of an investigation, inspection, or a decision not to conduct a further inquiry. If an investigation is necessary, it will be initiated under the company’s activity record.

a. FAA Aviation Safety Hotline. These allegations are received through the FAA’s Aviation Safety Hotline office and directed to the Drug Abatement Division for action and may involve individuals and/or companies. Issues involving individuals are referred to AAM-830 for investigation. However, some issues involving companies may be assigned to the C&E Centers for inspection or investigation.

b. NCT. An NCT is an internal process that inspectors, investigators, managers, or anyone within the Drug Abatement Division may use to document issues that emerge during an inspection, an investigation, or through the course of normal duties. These issues typically involve possible noncompliance by another company or an individual. The majority of these will be handled by the C&E Centers, unless circumstances require action by AAM-830.

c. Congressional Inquiries. Congressional inquiries are correspondence requesting information regarding constituents. Congressional inquiries are referred to the Program Policy Branch (AAM-820) for action, but may be coordinated with the other Branches and the C&E Centers where necessary.

d. Refusal Reports. An employer is required to report all refusals to submit to drug or alcohol testing by an individual who holds an airman certificate issued in accordance with 14 CFR parts 61, 63, or 65. These refusals are investigated by AAM-830. e. Part 67 Reports. An employer is required to report all verified positive drug test results, confirmed alcohol misuse violations, or refusals to submit to testing by any individual who holds a medical certificate issued in accordance with 14 CFR part 67 or refusals to submit to testing. These cases are also investigated by AAM-830.

f. Complaints. Complaints are the result of an individual or company requesting an investigation of an event, or information received from other FAA sources (e.g., Flight Standards Service). These allegations may be against a company or individual. These issues are referred to AAM-830 for review. AAM-830 may conduct the investigation and coordinate with the C&E Centers for assistance where necessary. It is possible that the issue may be referred to the C&E Center for inspection or investigation. 3. Investigations of a Company. These investigations include similar procedures established for an inspection, as described in Chapter 2 of this order. An LOI is issued alleging the violation. The response may result in administrative action (i.e., WN or LOC) or legal enforcement action (civil penalty or certificate action). An on-site investigation at the company or one of its locations may or may not be necessary and this determination is made by a Branch or Center Manager.

4. Investigations of Individuals Who Perform Safety-Sensitive Functions. Investigations involving individuals who perform safety-sensitive functions are critical and require an immediate investigation. All investigations of individuals are the responsibility of AAM-830. These investigations most often result from the following:

a. Report of an individual’s refusal to submit to a drug or alcohol test;

b. Report of a verified positive drug test or an alcohol misuse violation by an individual who holds a medical certificate issued in accordance with 14 CFR part 67;

c. An individual performing safety-sensitive functions after testing positive or refusing to submit to a drug and/or alcohol test without complying with the return-to-duty process;

d. An FAA Aviation Safety Hotline complaint; or

e. A complaint received based on the activities of an employee as they relate to drug and alcohol testing.

5. If an inspection team finds, during the normal course of an inspection, any issues that relate to violations by an individual who performs safety-sensitive functions, the inspection lead will notify the C&E Center Manager, who will subsequently notify AAM-830. The Manager of AAM-830 will provide further directions/actions and the matter should be left open.

Chapter 4. Voluntary Disclosures

1. General. One of the elements of the FAA’s compliance and enforcement philosophy is that aviation safety depends primarily on voluntary adherence to the regulations. The FAA has developed programs to encourage companies to examine their own compliance efforts. Holders of part 119 certificates with authority to operate under parts 121 and/or 135 and part 145 repair station certificates are eligible to participate in the Voluntary Disclosure Reporting Program, which is described in Advisory Circular (AC) 00-58B. This program allows certificate holders to report inadvertent violations to the FAA along with a description of the corrective action taken, and the comprehensive fix for preventing future violations.

2. Procedures. When processing voluntary disclosure cases, each inspector/investigator must use the information in this chapter, in conjunction with AC 00-58B, and adhere to the procedures established under the Quality Management System of ISO AAM-800-007. Failure to follow these procedures may result in a corrective action report, as described in the ISO procedure. When a company has a voluntary disclosure, the inspector/investigator must check the status of the voluntary disclosure. If the disclosure is still pending, the inspector/investigator must gather evidence of the violation, immediate corrective actions, and comprehensive fix. The information should be provided to the responsible inspector, investigator or program analyst assigned to the voluntary disclosure. If the disclosure is closed, the inspector/investigator must check to ensure the comprehensive fix has been implemented. All follow-up activities should be entered in CETS. All outgoing correspondence must be written and transmitted through USPS, certified return receipt. Electronic mail is not authorized.

a. Once a certificate holder discovers an apparent violation, the company may voluntarily disclose it to the FAA within 24 hours. The process for documentation when a disclosure is received is critical to whether it is accepted or denied. Each Drug Abatement employee is responsible for ensuring that a disclosure is reported immediately to the appropriate Branch or C&E Center Manager.

b. Initial notification from the company can be accomplished by the following means:

(1) By phone, through contacting any Drug Abatement employee. Once the notification is received, the Drug Abatement employee must refer the certificate holder to the appropriate Branch or C&E Center Manager and then prepare a detailed statement of the conversation to transmit to the Branch or C&E Center Manager.

(2) Written correspondence via regular mail or electronic mail. All written correspondence must be referred to the appropriate Branch or C&E Center Manager.

(3) In person, during an inspection or investigation. When this occurs, the inspector/investigator should not tell the company that the disclosure is unacceptable. Take the information and complete your inspection or investigation, including the issues that were disclosed. Advise the company to submit the information to the appropriate Branch or C&E

Center Manager. As soon as possible, the inspector/investigator should prepare a detailed statement of the submission to transmit to the appropriate Branch or C&E Center Manager. Ensure that the statement includes the date and time of the notification, as well as the name and title of the person who provided the information.

c. After receipt of the disclosure, the assigned manager must determine if there is a violation of the regulations or not. If there is not, the certificate holder is advised in writing that its disclosure was not a violation using the letter template contained in CETS.

d. Issuance of the Letter of Acknowledgment (LOA). If the disclosure describes a violation of the regulations or if it's unknown as to whether a violation exists, the inspector/investigator must issue an LOA using the letter template contained in CETS and send through USPS, certified return receipt. Electronic mail is not authorized. The LOA serves two purposes. First, it acknowledges receipt of the initial notification. Second, it identifies, in accordance with AC 00-58B, the information that the certificate holder must submit in writing to the FAA, if not already provided. This information should be provided to the FAA, within 10 working days after the initial notification was made.

e. Upon receipt of the response to the LOA, the inspector/investigator must analyze the violation and the information, obtain the evidence to show the violation has been corrected, and determine whether the comprehensive fix is acceptable. The determination to deny or accept a voluntary disclosure is based on specific factors of the violation and the certificate holder’s actions. When making this determination, it is important for the inspector/investigator and Branch or C&E Center Manager to follow the procedures established under AC 00-58B and Order 2150.3B. Additionally, it’s imperative to coordinate with the Drug Abatement Division Manager and Chief Counsel’s Office for disclosures that are complex or require legal guidance.

(1) If the FAA accepts the voluntary disclosure, the inspector/investigator must send the certificate holder an LOC (using the letter template contained in CETS) through USPS. The LOC is assigned an EIR File Number. At the conclusion of the disclosure process, the employer is referred for inspection in CETS. At the next inspection, inspectors/investigators will evaluate the comprehensive fix and annotate the results in CETS.

(2) If the voluntary disclosure is denied, the inspector/investigator must generate a letter of denial using the letter template contained in CETS and send it through USPS, certified return receipt, and refer the employer for inspection or investigation in CETS. Ultimately, the issue will be handled via the inspection results or the investigative action. At the next inspection, inspectors/investigators will gather evidence of violation and process inspection paperwork as if the company had not disclosed the violation. When closing the inspection, inspectors/investigators will add notes to the analysis of the voluntary disclosure indicating the findings and action taken with the inspector/investigator’s initials and date information was entered.

f. Once the disclosure is complete, it must be included under the employer’s enforcement record in its C&E Center and CETS profile. In addition to the correspondence and evidence, the C&E Center record must include the following:

(1) Inspector/Investigator Analysis. The inspector/investigator analysis must include the following (see sample analysis in Figure 4-1):

(a) Summary of the voluntary disclosure. This is a chronological summary, including affiliated dates, of the voluntary disclosure. This includes a summary of the written and verbal communications to and from the certificate holder.

(b) Summary of the certificate holder’s comprehensive fix.

(c) Analysis and recommendation to deny or accept voluntary disclosure.

(d) Final action.

(2) Copy of the 2150-5 Form. Refer to the Drug Abatement Division’s EIS Manual for completing the 2150-5 form for a voluntary disclosure. Some of the certificate holder’s information, such as its name and address, certificate number, etc. is not included on the 2150-5. Records submitted to the FAA under the Voluntary Disclosure Program are protected from release to the public.

Figure 4-1. Sample Inspector/Investigator Analysis

VOLUNTARY DISCLOSURE ONE TWENTY ONE AIRWAYS, INC. On April 17, 2006, One Twenty One Airways, Inc.’s Drug and Alcohol Program Manager, Brian Smith, was performing an internal audit of its drug and alcohol testing program. During this audit, he discovered that on March 28, 2006 One Twenty One Airways, Inc. transferred an employee, Mr. David Baker, from a non safety-sensitive position to a safety-sensitive position, but did not perform a pre-employment drug test on Mr. Smith prior to that transfer. Upon discovering this item of noncompliance, David Baker was immediately sent for a pre-employment drug test. On April 18, 2006, Brian Smith notified the FAA, via phone, and voluntarily disclosed the apparent violation of the drug testing regulations. On April 20, 2006, an LOA was sent to One Twenty One Airways, Inc., via certified mail, requesting the information prescribed in AC 00-58A and a copy of Mr. Baker’s verified negative test result. On May 2, 2006, One Twenty One Airways, Inc. submitted to the FAA, via fax, the information requested in the LOA. COMPREHENSIVE FIX:  All employees being transferred must go through the entire human resources process. The Human

Resource Action form was amended so that the negative drug test results will be documented prior to the employee’s transfer. This will ensure that a pre-employment drug test has been performed and a verified negative test received prior to transferring an employee into a safety-sensitive position.

 One Twenty One Airways, Inc. has a self audit program for its drug and alcohol testing program.

They have added transfers from non safety-sensitive positions to safety-sensitive positions to that audit.

 Brian Smith will be responsible for monitoring and ensuring that the violation does not reoccur in

the future.

RECOMMENDATION: A review of CETS shows that One Twenty One Airways, Inc. has not had any other violations of this nature. Based upon One Twenty One Airways Inc.’s compliance with the protocol in AC 00-58A, I recommend approval of the voluntary disclosure.

FINAL ACTION:

On May 16, 2006, One Twenty One Airways, Inc. was issued an LOC and referred to the inspection planner for a future inspection.

Chapter 5. Administrative Information 1. Authority to Change this Order. Practices, procedures, and documents contained in this order cannot be changed without the consent of the Drug Abatement Division Manager. Supplements to this order are prohibited unless authorized by the Drug Abatement Division Manager. 2. Background. In response to fatal aviation accidents related to substance abuse, the FAA adopted regulations in 1988 (codified as 14 CFR part 121, appendix I), which required aviation employers to implement a drug testing program for those personnel who perform safety-sensitive functions. In 1994, the mandate for alcohol testing was added to 14 CFR part 121, appendix J, as a result of the investigatory findings that the Exxon Valdez oil spill of 1989 was alcohol related and that pilots of a major U.S. air carrier had flown while intoxicated in 1990. In 2009, both appendices I and J were joined to create 14 CFR part 120, Drug and Alcohol Testing Program. Upon the inception of the drug testing regulations, the Drug Abatement Division developed a comprehensive inspection program. This order has been designed to serve as a multipurpose document that will guide the inspectors and investigators in the effective implementation of the inspection program, as well as provide them with supplemental information regarding the FAA-mandated drug and alcohol testing program. 3. References. These are the references that inspectors and investigators must use to perform his/her job.

a. Code of Federal Regulations (CFR). The CFR contains the regulations implemented by each Federal agency to implement statutes passed by the United States Congress. The drug and alcohol testing regulations are located in 14 CFR part 120 and 49 CFR part 40. The CFR can be accessed online through the Government Printing Office Web site at: http://www.gpoaccess.gov .

b. Federal Register. The Federal Register is the official daily publication for Executive Orders, proposed rulemaking, final rules, and notices of Federal agencies and organizations. The Federal Register is published by the Office of the Federal Register, National Archives and Records Administration (NARA), and can be accessed through the Government Printing Office Web site at: http://www.gpoaccess.gov .

c. United States Code (USC). The USC consists of Federal statutes passed by the United States Congress. The drug and alcohol testing regulations are promulgated under the statutory authority of the Omnibus Transportation Employee Testing Act of 1991 (49 USC §§ 45101-45107) and the FAA’s general safety authority outlined in 49 USC§§106(g) and 44701. The USC can be accessed online through the Government Printing Office Web site at: http://www.gpoaccess.gov

d. Drug Abatement Division (AAM-800) QMS Web Site. This site is a part of the FAA’s Aviation Safety Quality Management System (AVS QMS) Web site. It contains AAM-800’s ISO approved processes and procedures, records, documents, and forms. This Web site can be accessed at: https://intranet.faa.gov/faaemployees/org/linebusiness/avs/qms/qms_homepages/aam/qms_divisions/ .

e. FAA Drug Abatement Division Web Site. This Web site is a comprehensive source of information as it pertains to the Drug Abatement Division’s development, implementation, administration, evaluation, and compliance monitoring of the aviation industry drug and alcohol

testing program described in 14 CFR part 120. This Web site can be accessed at: http://www.faa.gov/about/office_org/headquarters_offices/avs/offices/aam/drug_alcohol/

f. FAA Orders/Notices/Advisory Circulars (AC). FAA orders, such as the Compliance and Enforcement Program (Order 2150.3B), and notices are directives to its own personnel and designees on how to carry out its responsibilities. ACs are issued to provide guidance and information in a designated subject area or to show a method acceptable to the Administrator for complying with a Federal Aviation Regulation. FAA orders, notices, and ACs can be accessed online at the following Web sites: http://rgl.faa.gov http://isddc.dot.gov/OLPWeb.ASP

g. Compliance Enforcement Tracking Subsystem (CETS). CETS provides the Office of Aerospace Medicine’s Drug Abatement Division with automated capabilities for tracking, scheduling, and managing enforcement activities (i.e., inspections, investigations, voluntary disclosures, and other enforcement-related activities). It also maintains a database of cases, future schedules, employers/contractors and C/TPAs, and correspondence templates. Guidance on using CETS has been published by AAM-800 in the CETS manual. Letters of notification, investigation, correction, and warning must adhere to the formats in CETS and may be altered only on the direction of the Drug Abatement Division Manager.

h. Drug Abatement Division’s Enforcement Information Subsystem (EIS) Manual. This manual contains the procedures for entering enforcement-related information into the FAA’s EIS. Inspectors and investigators should contact their manager for a copy of this manual.

i. DOT Office of Drug and Alcohol Policy and Compliance (ODAPC) Web Site. The ODAPC Web site is a comprehensive source of information as it pertains to the implementation and interpretation of the drug and alcohol testing regulations in 49 CFR part 40. This Web site can be accessed at: http://www.dot.gov/ost/dapc/ . j. Drug Abatement Division Policy and Guidance SharePoint Site. This site catalogues the Industry Drug and Alcohol Testing documents. This Web site can be accessed at: https://avssharepoint.faa.gov/AAM/800/820/DA_Policy_Database/default.aspx

12/08/2010 9120.1B Appendix A This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

Appendix A. FAA Drug Abatement Program Inspection Guide The following inspection guide is designed to assist inspectors and investigators in conducting an inspection of an employer or contractor’s drug and alcohol testing program. This guide replaces the Inspection Checklist, which is re-designated as the CETS Reference List. The CETS Reference List will continue to be the tool used for documenting out of compliance items or concerns in CETS. Another benefit to using this guide is to ensure that inspections are consistent and thorough. All inspectors and investigators must use this guide for conducting all inspections. Any changes to this guide should be referred to the Program Policy Branch Manager in AAM-820. A comprehensive inspection consists of the following parts: Part 1 – Administrative and Quality Assurance Review Guide Part 2 – Records Review Guide Part 3 – Collection Site Review Guide Part 4 – Medical Review Officer (MRO) Review Guide Part 5 – Substance Abuse Professional (SAP) Review Guide Not all inspections will include a review of each of the above parts. However, each inspection MUST include a review of parts 1 and 2. Once the inspection lead has entered the information from the inspection guide into the CETS record, the hard copy should be discarded.

12/08/2010 9120.1B Appendix A This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

PART 1: ADMINISTRATIVE AND QUALITY ASSURANCE REVIEW GUIDE

The following guide should be used during each inspection to ensure that areas regarding the company and their testing program are addressed. It’s important that the inspector(s) listen to the answers to verify the information during the records review. Company Name: Inspection Date(s): Company Information … Please explain the type of business you conduct. … What kind of work do(es) your employee(s) perform that requires him/her to be

subject to the FAA drug and alcohol testing regulations? Coverage ____ 1. How many total employees do you have? ____ 2. How many safety-sensitive employees do you have? Where are they located and what are their job categories? ____ 3. Do you contract out any or all safety-sensitive work?

a. How do you ensure these individuals are subject to an FAA-mandated drug and alcohol testing program? (Alternative Question – If so, are they subject to testing under their own FAA-mandated drug and alcohol testing program?) Service Agent ____ 1. Do you use a consortium/third party administrator to help with your program? Name/Location: … ____ 2. Where do you conduct your collections? ____ 3. If the employer has employees at many locations, or works during nonregular business hours, what collection site do they use? … Do you have a company program for testing non safety-sensitive employees? Mandatory Testing Pre-employment Testing ____ 1. Have you hired any new safety-sensitive employees in the last 24 months? What is your process for hiring an employee, identifying the duties from one job category to the other? ____ 2. Have you transferred any non safety-sensitive employees into safety-sensitive positions in the last 24 months? What is your process and how is this documented?

12/08/2010 9120.1B Appendix A ____ 3. How do you advise employees of the requirement for testing and the five drugs? ____ 4. Do you perform alcohol pre-employment testing? If not, move on. If so, are all applicants tested? ____ 5. Explain your process for performing the drug and alcohol records check. Have you ever not received a response from a previous employer? When and/or do you make a good faith effort if no response is received? ____ 6. Have you ever received a drug and alcohol records check for a previous employee? If so, how did you respond? ____ 7. How do you ask employees about pre-employment positives or refusals that the employee was not hired for? (an element required under section 40.25(j)) Random Drug and Alcohol Testing ____ 1. Do you manage your own random testing program, or does your C/TPA administer the program for you? ____ 2. Are you in your own pool or combined (if managed by a C/TPA)? ____ 3. How do you (or your C/TPA) generate the random selection list and how often? ____ 4. How do you receive the random selection list? ____ 5.

Explain your random testing process (at each location) once selections are done, starting from receiving the list, to notification, to ensure the collection is completed? ____ 6. How are employees added or removed from the random testing pool? ____ 7. Are you, as the program manager or DER, a safety-sensitive employee? If so, please explain how you are notified. Note: Additional questions relating to random review are in Appendix C of this Order. Post-accident Testing ____ 1. Have you ever had any post-accident testing? If not, move on. ____ 2. If so, ask to explain the accident. Verify documentation during the records review. Reasonable Cause/Suspicion Testing ____ 1. Have you ever had a reasonable cause or suspicion test? If not, move on to supervisory training. ____ 2. If so, ask to explain the circumstances including information regarding the trained supervisor who made the determination. Verify information during the records review. ____ 3. How many trained supervisors do you have?

If you have multiple worksites/times, do you have a trained supervisor available (if applicable)? ____ 4. Who conducts your supervisory training? How often? ____ 5. What is covered during this training?

12/08/2010 9120.1B Appendix A … Have any of your employees had a verified positive drug test, alcohol misuse violation, or refusal to test? If not, move on.

____ 1. If so, describe your company’s response to the outcome of the test. ____ 2. Do you have a policy for rehabilitation or termination? ____ 3. Do you provide the SAP information to every employee who tests positive? Verify SAP qualifications during record review and/or SAP interview (if applicable). ____ 4. Have any of your employees who hold a part 67 airman medical certificate had a verified positive drug test or alcohol violation? If so, have you reported the information to the Federal Air Surgeon? ____ 5. Have any of your employees refused? If part 61, 63, 65, or 67 airmen, have you reported the information to the Federal Air Surgeon? … Return-to-Duty Testing

____ 1. (If they have a policy for rehabilitation) Please explain your process for returning individuals who test positive, refuse or have an alcohol violation while on duty? ____ 2. How do you receive the SAP recommendation?

… Follow-up Testing ____ 1. Explain your follow-up testing process? ____ 2. Who performs your follow-up testing notifications? ____ 3. When do you perform your follow-up testing? … Do you or your Consortium/Third Party Provider advise your collector of the required information in §40.14? (e.g., employee name, ID number, etc.) If so, how? … Have you ever received results indicating insufficient specimen, dilute, cancelled, or invalid? If not, move on. If so, ask to explain what they did with the result. EAP/Training … 1. Where do you display your drug use/abuse materials? … 2. How do you make your alcohol information available to your employees? … 3. What information/training do you provide to your employees (including supervisors)

about the drug and alcohol testing program? Is this documented? … 4. Who provides your training and how often? Recordkeeping … 1. Where do you maintain your drug and alcohol testing records, which include your

drug and alcohol records check? … 2. Who has access to these records? Are they secured and how?

This is the conclusion of PART 1, Administrative and Quality Assurance Review. The inspection team must move to PART 2, Record Review, to support or obtain evidence to verify the procedures described. For inspections of service agents (collection site, MRO,

or SAP) for this employer, use PARTS 3, 4, or 5 of this guide accordingly.

12/08/2010 9120.1B Appendix A This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

PART 2: RECORDS REVIEW GUIDE Each inspection must include a review of one or all of the following program documents/records. For each area inspected, the responsible inspector/investigator must initial in the box on the right.

Documents/Records

Inspector’s/ Investigator’s

Initials

Time Period of

Review (Start to End) 1. Pre-employment Federal Drug Testing Custody & Control Forms and Results

Reviewed Not Reviewed Not Applicable

1a. Maintenance Records

Reviewed Not Reviewed Not Applicable

1b. Pilot Flight Records/Logs

Reviewed Not Reviewed Not Applicable

1c. Flight Attendant and Other Job Category Work Records

Reviewed Not Reviewed Not Applicable

1d. Job Descriptions

Reviewed Not Reviewed Not Applicable

2. Drug and Alcohol Records Check Forms and Responses, which may include employment applications.

Reviewed Not Reviewed Not Applicable

3. Random Testing Records, which includes: - Listing of random pool prior to selection; - Random selections; - Custody and Control forms and/or results - Alcohol Testing Forms w/ results

Reviewed Not Reviewed Not Applicable

4. Reportable Accident Records & Post-Accident Test Results

Reviewed Not Reviewed Not Applicable

12/08/2010 9120.1B Appendix A 5. Reasonable Cause & Reasonable Suspicion Results and Documentation

Reviewed Not Reviewed Not Applicable

6. Records of verified positive drug test results or alcohol violations for part 67 medical certificate holders, including notifications to the Federal Air Surgeon

Reviewed Not Reviewed Not Applicable

7. Refusal Documentation (drug and/or alcohol), including notifications to the Federal Air Surgeon for part 61, 63, 65, and 67 airman.

Reviewed Not Reviewed Not Applicable

8. Verified Positive Drug Test Results

Reviewed Not Reviewed Not Applicable

9. Alcohol Misuse Violations

Reviewed Not Reviewed Not Applicable

10. Disposition of Verified Positive Drug Test Cases and Alcohol Misuse Violation Cases, including Return-to- Duty and Follow-up Testing Records (if applicable)

Reviewed Not Reviewed Not Applicable

11. Documents Pertaining to Drug and/or Alcohol Testing Arbitration or Litigation

Reviewed Not Reviewed Not Applicable

12. Drug and Alcohol Program Training Records

Employee Records Supervisor Records

Reviewed Not Reviewed Not Applicable

13. Alcohol Policy and Drug Information Materials

Reviewed Not Reviewed Not Applicable

14. Documentation to Verify Contractor Compliance

Reviewed Not Reviewed Not Applicable

12/08/2010 9120.1B Appendix A 15. Collection Site Documentation: Collector/Breath Alcohol Technician Training Records Specimen Collection Logs Calibration Logs for EBT devices

Reviewed Not Reviewed Not Applicable

16. MRO Records: MRO Qualification/Training Records Records of Notification & Determination/Verification

Reviewed Not Reviewed Not Applicable

17. SAP Records: SAP Qualification/Training Records Initial and Follow-up Evaluations

Reviewed Not Reviewed Not Applicable

18. Laboratory Records Semi-annual Summaries Blind Testing Results

Reviewed Not Reviewed Not Applicable

12/08/2010 9120.1B Appendix A This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

PART 3: COLLECTION SITE REVIEW GUIDE

When an inspection includes a review of the collection site, including a simulated collection with the specimen collector and/or breath alcohol technician (BAT), each inspector must use the following guide. Collection Site Facility Name: Interviewee (site manager and/or collector): Evaluation of Facility

____ Privacy for testing. ____ Security of the testing site, results and specimens. ____ Toilet area for collection is compliant. ____ EBT or ASD are on conforming products listing. ____ If the dry gas method is used to calibrate the EBT, check the expiration date on the “Scotty Bottle”. Documents that must be reviewed:

____ Collector and BAT Training Certificates ____ Quality Assurance Plan for the EBT and ASD ____ Review of custody and control forms and alcohol testing forms used for

DOT testing ____ External calibration logs/documentation ____ Facility manuals to ensure they include the up-to-date regulations. How does the employer or Consortium/Third Party Provider advise you of the following information (required under 40.14)?

(a) Full name of the employee being tested (b) Employee SSN or ID number (c) Laboratory name and address (if not pre-printed on the form) (d) Employer name, address, phone number, fax number (if not preprinted on the

form) (e) Designated employer representative (as required by 40.35) (f) MRO name, address, phone number and fax number (if not preprinted on the

form) (g) DOT Agency which regulates the employees safety-sensitive duties (if not pre-

checked on the form) (h) Test reason, as appropriate: Pre-employement, random, reasonable

suspicion/reasonable cause, post-accident, return-to-duty, and follow-up (i) Whether the test is to be observed or not (j) (Optional) Consortium/Third Party Administrator’s name, address and fax number

(if not preprinted on the form)

12/08/2010 9120.1B Appendix A During the simulated urine collection, ensure that the following steps are demonstrated: Name of Collector:  Identify the donor by picture identification.  Explain the collection process, including showing the instructions on the back of the CCF.  Complete step 1 of the custody and control form.  Instruct the donor to remove any unnecessary outer garments, empty pockets, etc. (allow the items to be locked and provide a key?)  Instruct the donor not to list any medications on the CCF.  Instruct the donor to wash and dry their hands. Instruct the donor not to wash their hands again until after delivering the specimen.  Allow the donor to, or in their presence, select a collection cup.  In the donor’s presence, open the collection cup from a sealed bag/package.  Prepare the collection area – blue dye in the toilet, tape/shut off faucets and/or soap dispensers.  Inspect the collection area.  Advise the donor to provide 45ml in the cup and not to flush.  Upon receipt of the specimen, and in the presence of the donor, does the

collector:  Read the temperature and note the CCF?  Evaluate specimen for signs of being tampered?  Open the two specimen bottles and pour 30ml into the first and 15ml in the second?  Firmly cap both bottles, place seal A over the 30ml and seal B over the 15ml bottles. Date both seals.  Have the donor initial each seal.  Complete and sign Step 4 of the CCF.  Instruct the donor to read the certification and complete Step 5 of the CCF.  Provide the donor with copy 5; place the sealed bottles and copy 1 of the CCF into the shipping container. Seal the container.  Initial and date the shipping container seal.  Advise the donor that the collection process is complete and that he/she may leave.  Transmit (via fax, mail, etc.) copy 2 to the MRO and copy 3 to the employer within 24 hours or the next business day. Further questions you may ask:

1. Has the collector ever had a shy bladder situation? If so, explain the steps they followed. 2. Has the collector ever had a specimen outside of temperature? If so, explain the steps they followed.

12/08/2010 9120.1B Appendix A 3. Have they ever had a refusal, where an individual refused to cooperate or provide? If so, explain the steps they followed.

4. Have they ever conducted a direct observation collection? If so, explain the steps they followed. During the simulated alcohol test, ensure that the following steps are demonstrated: Name of BAT (if different from collector):  Identify the donor by picture identification.  Explain the testing process, including showing the instructions on the back of the ATF.  Complete Step 1 of the ATF.  Instruct the donor to complete Step 2 of the ATF and sign the certification.  Open a sealed mouthpiece in view of the donor and attach it to the device.  Instruct the donor to blow forcefully into the mouthpiece until adequate breath is provided.  Show the donor the result displayed on the EBT.  Record the displayed result, test number, device, the serial number of the device, time and result in Step 3 of the ATF or;

 Attach the printed result to the ATF in the proper place with tamper-evident tape.  Advise the donor that the alcohol testing process is complete and that he/she may leave.  Transmit (via fax, mail, etc.) the result to the designated employer representative in a confidential manner. Further questions you may ask:

1. Has the BAT ever had a result that was above 0.02? If so, do they perform the following steps:  Explain the confirmation procedure as follows:  Instruct the donor not to eat, drink or put any object or substance in their mouth, and to the extent possible, not belch during the waiting period before the confirmation test.  Wait 15 to 30 minutes after the completion of the initial test.  At the completion of the waiting period, conduct the confirmation test.  In the presence of the donor, conduct an air blank and show the reading to the donor.  Open a sealed mouthpiece in view of the donor and attach it to the device.  Instruct the donor to blow forcefully into the mouth piece until adequate breath is provided.  Show the donor the result displayed on the EBT.  Record the displayed result, test number, device, the serial number of the device, time and result in Step 3 of the ATF or; attach the printed result to the ATF in the proper place with tamper-evident tape.

12/08/2010 9120.1B Appendix A  Date and sign the ATC certification in step 3.  Instruct the donor to sign the ATF certification in Step 4.  Immediately transmit (via person, telephone or electronic means) the results using Copy 1 to the designated employer representative in a confidential manner, ensuring it was received. 2. At what point does the BAT perform the EBT calibrations? 3. Has the BAT ever had a situation with a shy lung? If so, explain the steps they followed.

4. Have they ever had a refusal, where an individual refused to cooperate or provide? If so, explain the steps they followed.

12/08/2010 9120.1B Appendix A This document is available electronically on our Drug Abatement Division (AAM-800) QMS Web Site.

PART 4: MEDICAL REVIEW OFFICER (MRO) REVIEW GUIDE

Continue reading ↓ 120 of 171 passages shown