Radar Vectors
FAA Order Cancelled Issued Aug 7, 2002 AIR-140 112 pages Copy saved Nov 18, 2026

Order 8100.9 Das, Doa, and SFAR 36 Authorization

This document is cancelled. It may have been replaced. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (10 of 112 pages). Check the original, as some words may be misread.

ORDER 8100.9

DAS, DOA, AND SFAR 36 AUTHORIZATION PROCEDURES

August 7, 2002

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Distribution: A·W {IR/FSNN)-3; A·X(CD/FS)-3;A-FFS·5· 7(MAX); A-FAC·1,3,4(STD); AMA-220 (20 copies); AMA-250 (15 copies) AFS-600 (10 copies); AVR-20 {ALL); AEU-100/200 {1 copy)

FEDERAL AVIATION ADMINISTRATION

Initiated By: AIR-100/AIR-200/AFS-300

RECORD OF CHANGES DIRECTIVE NO. 8100.9

CHANGE SUPPLEMENTS OPTIONAL CHANGE TO SUPPLEMENTS OPTIONAL TO

BASIC BASIC

\ i ! I ' : ' I I

I i I ! i !

'

i i - I i ! I i

i

_i J 1---- I I

FAA Form 1320-5 (6-80) usE PREVIous EDITION

8/7/02 8100.9

FOREWORD

BASIC BASIC

This order establishes the procedures, guidance, and limitations of authority for organizations that the Federal Aviation Administration (FAA) authorizes as a Designated Alteration Station, Delegation Option Authorization holder, or Special Federal Aviation Regulation 36 holder. The Aircraft Certification Directorates, Aircraft Certification Offices, and Flight Standards personnel shall use this order as an aid in the administration of these organizations. This order contains guidance material for the organizations and is intended to provide a better understanding of the functions authorized and procedures to be followed when exercising the authority granted to them by the FAA.

Please forward any deficiencies found, clarifications needed, or improvements suggested regarding the content of this order to the Aircraft Certification Service, Automated Systems Branch, AIR-520, Attention: Directives Management Officer, for consideration. FAA Form 1320-19, Directive Feedback Information, is located c.n the last page of this order for your convenience.

40~ Nicholas A. Sabatini

Associate Administrator, Regulation and Certification, AVR-1

i (and ii)

8/7/02 8100.9

TABLE OF CONTENTS

CHAPTER!. GENERAL

Paragraph Page 1-1. Purpose … 1 1-2. Distribution … 1 1-3. Cancelation … 1 1-4. Effective Date … 1 1-5. Implementation … 1 1-6. Background … 1 1-7 Authority to Change this Order … 1 1-8. Deviations … 1 1-9. Related Publications … 1 1-10. Definitions … 2 1-11. Acronyms … 3 1-12. Forms/Letters/Formats … 3

CHAPTER 2. FAA ROLES AND RESPONSIBILITIES

CHAPTER 2. FAA ROLES AND RESPONSIBILITIES

2-1. General … 5 2-2. Organization Management Team (OMT) … 5 2-3. Application … 5 2-4. Selection Process … 5 2-5. Authorization … 6 2-6. Oversight … 7

CHAPTER 3. DAS/DOA/SFAR 36 QUALIFICATIONS, RESPONSIBILITIES, AND AUTHORITY

3-1. General … 11 3-2. Qualifications … 11 3-3. Responsibility … 11 3-4. Memorandum of Understanding … 12 3-5. Staff Authority and Responsibility … 12 3-6. Inherently Governmental Functions … 12 3-7. Staff Qualification Requirements … 13 3-8. Procedure Manual … 13 3-9. Training … 14 3-10. Duration of Appointments … 15 3-11. Self Evaluation … 15 3-12. Manufacturing Work Activity … 15

CHAPTER 4. DESIGNATED ALTERATION STATIONS

CHAPTER 4. DESIGNATED ALTERATION STATIONS

4-1. General … 17 4-2. DAS Authorized Functions … 18 4-3 DAS Procedure Manual Requirements … 22

CHAPTER 5. DELEGATION OPTION AUTHORIZATION

5-1. General … 25 5-2. DOA Authorized Functions … 26 Figure 5-1, DOA Type Certification Process … 27 5-3 DOA Procedure Manual Requirements … 32

CHAPTER 5. DELEGATION OPTION AUTHORIZATION

Page iii

8100.9 8/7/02

TABLE OF CONTENTS-CONTINUED

CHAPTER 6. SFAR 36 AUTHORIZATIONS

Paragraph Page 6-1. General … 35 6-2. Development of Major repair Data … 35 6-3 SPAR 36 Procedure Manual Requirements … 36

CHAPTER 7. DESIGNEE INFORMATION NETWORK

7-1. General … 37 7-2. Designation Form … 37 7-3. Authorization Numbers … 37 7-4. Functions Summary … 37 7-5. FAA Internal Comments Form … 37

CHAPTERS. TERMINATION

CHAPTERS. TERMINATION

8-1. General … 39 8-2. Cause for Termination of Designations … 39 8-3 Procedures for Termination and Initial Appeal of a DOA, DAS, or SPAR 36 … 39 8-4 No Response from DOA, DAS, or SPAR 36 … 40 8-5. Surrender of Designation … 40 8-6. Coordination of Termination Decisions … 40 8-7. Designee Information Network Status … 40

APPENDIX 1. SAMPLE FORMS AND LETTERS (12 PAGES)

APPENDIX 1. SAMPLE FORMS AND LETTERS (12 PAGES)

Figure 1. Sample Denial letter … 1 Figure 2. Sample Form 8100-8, DAS, DOA, or SPAR 36 Statement of Qualifications … 2 Figure 3. Sample DAS Authorization Letter … 3 Figure 4. Sample DOA Authorization Letter … 4 Figure 5. Sample SPAR 36 Authorization Letter … 5 Figure 6. Sample Memorandum of Understanding-All Authorizations … 6 Figure 7. Sample FAA Form 8100-9 Used for DAS Data Approval … 8 Figure 8. Sample FAA Form 8100-9 Used for DOA Data Approval … 9 Figure 9. Sample FAA Form 8100-9 Used for SPAR 36 Compliance Finding … 10 Figure 10. Sample Summary Activity Report … 11

APPENDIX 2. SAMPLE DAS, DOA, SFAR 36 PROCEDURE MANUAL (12 PAGES)

APPENDIX 2. SAMPLE DAS, DOA, SFAR 36 PROCEDURE MANUAL (12 PAGES)

APPENDIX 3. CERTIFICATION PLANS (2 PAGES)

Figure 1. DAS Certification Plans … 1 Figure 2. DO.-\ Certification Plans … 2

APPENDIX 4. SAMPLE CONFORMITY PLAN (4 PAGES)

APPENDIX 5. TECHNICAL EVALUATION PROCEDURES AND CRITERIA (31 PAGES)

APPENDIX 5. TECHNICAL EVALUATION PROCEDURES AND CRITERIA (31 PAGES)

Pageiv

817/02 8100.9

CHAPTER 1. GENERAL

1-1. PURPOSE. This order prescribes the Federal Aviation Administration (FAA) procedures governing organizations authorized as a Designated Alteration Station (DAS), Delegation Option Authorization (DOA), or Special Federal Aviation Regulation Number 36 (SFAR 36). This order replaces existing information contained in orders and notices governing the qualifications, appointment, procedures, supervision, oversight, and training of DAS, DOA, and SFAR 36 authorization holders.

CHAPTER 1. GENERAL

1-2. DISTRIBUTION. This order is distributed to the branch levels of the Aircraft Certification Service, Flight Standards Service, and the Office of Aviation System Standards in Washington Headquarters; to the branch level in the Aircraft Certification Directorates and the Regional Flight Standards Divisions; to the International Field Offices (IFOs) and the Flight Standards District Offices (FSDOs); to all Aircraft Certification Offices (ACOs) and all Manufacturing Inspection District and Satellite Offices (MIDOs and MISOs); to the Flight Standards Branch and Aircraft Certification Branch at the FAA Academy; to the Suspected Unapproved Parts Program Office; and to the Brussels Aircraft Certification Division and Flight Standards Staff.

1-3. CANCELLATION. Order 8000.42A, Authorization to Develop and Use Major Repair Data not Specifically Approved by the Administrator, dated March 28, 1980, is cancelled.

1-4. EFFECTIVE DATE. FAA managing offices and applicants must immediately adopt the practices contained herein related to selection and oversight of DAS, DOA, and SFAR 36 authorizations issued in accordance with this order.

1-5. IMPLEMENTATION. Within sixty calendar days of publication of this order existing authorization holders are to meet with their managing ACO and establish an agreed-to time frame for the approval of their procedure manual. Procedure manuals must be revised to meet the requirements of this order and approved within 18 months of the issue date of this order. The appointing office will coordinate/invite the appropriate FAA participants to this meeting. Failme to update the procedure manual within

18-months may result in the authorization being suspended, revoked, or terminated. Existing DAS/DOA/SFAR 36 staff members and administrators must be evaluated in accordance with the qualification criteria in this order and their authorized functions as an Authorized Representative (AR) or administrator must be identified in the procedure manual.

Par 1-1

1-6. BACKGROUND. Title 49 United States Code section 44702(d), authorizes the FAA Administrator the authority to delegate matters related to the examination, testing, and inspection necessary to issue certificates, and the issuance of certificates. Title 14 of the Code of Federal Regulations (14 CFR) part 21 subparts J and M, and Special Federal Aviation Regulation (SFAR) No. 36 prescribe the rules for Delegation Option Authorizations, Designated Alteration Stations, and SFAR 36 delegations. The FAA issues these authorizations to qualified organizations to assist the FAA in matters related to type certification, supplemental type certification, airworthiness approvals, and major alterations and repairs. Any authorization is a privilege granted by the Administrator and it is not the right of every qualified applicant to be granted a DAS, DOA or SFAR 36 authorization.

1-7. AUTHORITY TO CHANGE THIS ORDER. The Aircraft Certification Service, Aircraft Engineering Division (AIR-100), the Production and Airworthiness Division (AIR-200), and the Flight Standards Service, Continuous Airworthiness Maintenance Division (AFS- 300) has the authority to revise or cancel material in this order. Depending on the change(s), the appropriate FAA office (AIR-100, AIR-200, and AFS-300) will initiate the change and coordinate with the other offices.

1-8. DEVIATIONS. Adherence to procedures in this order is necessary for uniform administration of this directive. Any deviations from this guidance material must be coordinated and approved by AIR-100/200, and AFS-300 as applicable. If deviation is necessary, the FAA employee involved should ensure that deviations are substantiated, documented, and concurred with by the appropriate supervisor and approved by AIR-100, AIR-200, or AFS-300 as appropriate.

1-9. RELATED PUBLICATIONS

1-9. RELATED PUBLICATIONS

a. AC 21-23, Airworthiness Certification of Civil Aircraft, Engines, Propellers, and Related Products Imported into the United States

b. AC 21-40, Application Guide for Obtaining a Supplemental Type Certificate

c. Order 2150.3, Compliance and Enforcement Program

d. Order 4040.26, Aircraft Certification Service Flight Safety Program

e. Order 8100.5, Aircraft Certification Directorate Procedures

Page 1

f. Order 8100.7, Aircraft Certification Systems Evaluation Program

g. Order 8100.8, Designee Management Handbook

h. Order 8110.4, Type Certification

i. Order 8110.37, Designated Engineering Representative (DER) Guidance Handbook

j. Order 8120.2, Production Approval and Surveillance Procedures

k. Order 8130.2 Airworthiness Certification of Aircraft and Related Products

I. Order 8130.21, Procedures for Completion and use of the Authorized Release Certificate, FAA Form 8130-3, Airworthiness Approval Tag

m. Order 8300.10, Airworthiness Inspector's Handbook

n. Order 8430.21, Flight Standards Division, Aircraft Certification Div. And Aircraft Evaluation Group Responsibilities

NOTE: Publications referenced throughout refer to the latest revision level.

1-10. DEFINITIONS. For the purposes of this directive the following definitions apply:

a. Administrator. When spelled with a capital "A" refers to the FAA Administrator. When spelled with a lower case "a" refers to the delegation administrator.

b. Aircraft Flight Manual (AFM). Either the Airplane Flight Manual or Rotorcraft Flight Manual (as applicable).

c. Appeal Panel. Two or more office managers and a senior ASE/ ASIIFTP assigned the task of determining if the appointment process was conducted properly in the event of an applicant's appeal of the FAA's decision.

d. Appointing Office. The Aircraft Certification Office (ACO) and/or Flight Standards District Office (FSDO) having selection and appointment responsibility for the authorization holder.

e. Authorization Letter. A FAA letter specifying the authorized functions, and any associated limitations, for which the delegation is authorized.

f. Authorized Representative (AR). Any individual within the DOA, DAS, or SPAR 36 that is authorized in the procedure manual to make findings of compliance, determination of conformity, and/or airworthiness on behalf of the FAA.

Page 2

g. AR Trainee. An individual that meets all the requirements for a staff AR except for direct experience working with the FAA. AR trainees must not make findings, which are not subsequently verified and approved by either, a staff AR or the FAA.

h. Authorization Holder. The organization/ company holding the certificate that provides the eligibility for the DAS, DOA, or SPAR 36 authorization.

i. Compliance Inspection. Compliance inspections are physical inspections performed to review an installation and its relationship to other installations on a product to determine compliance with 14 CPR/CAR requirements, which cannot be determined adequately from an evaluation of the technical data.

j. Conformity Inspection. Conformity inspections verify and provide objective documentation that test articles, parts, assemblies, installations, functions, and test set ups conform to the design data.

k. DAS/DOA/SF AR 36 administrator. The focal point(s) for the authorization holder who is responsible for managing the DAS/DOA/SFAR 36 activities and communicating with the OMT.

I. Delegation Option Authorization (DOA). A manufacturer holding a current type certificate and production certificate issued under standard procedures that is authorized by the FAA to conduct type, production, and airworthiness certification functions in accordance with 14 CPR part 21, subpart J.

m. Designated Alteration Station (DAS). A repair station, air carrier, or manufacturer authorized by the FAA to issue Supplemental Type Certificates in accordance with

14 CPR part 21, subpart M.

n. Designee Information Network (DIN), The Designee Information Network is an automated information system designed to support the delegation management process by providing a consolidated delegation information repository for tracking pertinent delegation data.

o. Delegated Organization. Refers to DAS, DOA, and SPAR 36 organizations.

p. Evaluation Panel (EP). The Evaluation Panel should be comprised of the prospective Organization Management Team (OMT) in order to determine the appropriateness of the appointment or denial.

q. Manufacturer. A manufacturer is a production approval holder (PC, APIS, PMA, or TSOA).

r. Organization Management Team (OMT). The team of FAA personnel responsible for supervision and

Par 1-10

management of the DAS, DOA or SF AR 36, and the projects they perform. The Organization Management Team consists of personnel from the Aircraft Certification Offices (ACO), Certificate Management Offices (CMO), Manufacturing Inspection District Offices (MIDO), and Flight Standards District Offices (FSDO), as appropriate, in the geographical area where the authorization holder is located.

NOTE: The ACO has primary responsibility for management of the engineering and flight test staff and the certification procedures spelled out in the procedure manual. The OMT must include ACO engineers from all technical disciplines performed by the authorization holder. The MIDO has primary responsibility for manarement of the inspection and airworthiness staff and procedures for the functions they perform. The Aircraft Evaluation Group (AEG) supports the ACO for Instructions for Continued Airworthiness (ICA) in accordance with 14 CFR 21.50. The FSDO has primary responsibility for the certificate management activity associated with an SF AR 36 holder.

s. OMT lead. Focal point for the OMT who is selected by the managing ACO.

t. Principal Engineer (PE). The Aviation Safety Engineer (ASE) within the managing ACO who is assigned supervision and oversight responsibility for appointed engineering functions within the DASIDONSF AR 36.

u. Principal Inspector (PI). The Aviation Safety Inspector (ASI) within the managing MIDO/FSDO responsible for supervision and oversight of airworthiness, maintenance and manufacturing inspection functions within the DAS/DONSFAR 36.

v. Special Federal Aviation Regulation Number 36 (SF AR 36). A repair station, air carrier, or commercial operator authorized to develop and use major repair data that are not specifically approved by the FAA Administrator in accordance with SFAR 36. (SFAR 36 is found in the regulations at the beginning of 14 CFR part 121.)

w. Supervision. That portion of FAA oversight responsibilities for DOAs/DASs/SFAR36s that includes: informing the DOA/DAS/SFAR36 holders of its duties and responsibilities, authorizing activities outside the geographic area, providing guidance and direction in the implementation of all assigned duties, providing training, reviewing performance, initiating corrective action as required, and maintaining current and accurate records.

1-11. ACRONYMS. The following is a list of acronyms used in this order:

Par 1-10

14 CFR AC ACO ACSEP

14 CFR AC ACO ACSEP

AEG AFS AIR AFM AFMS AP AR CAA DAR DAS DER DIN DMIR

DOA EP FAA FSDO ICA MIDO

MMEL MOU OMT PE PI PLR PNL SFAR STC STIR TCDS

Title 14 of the Code of Federal Regulations Advisory Circular Aircraft Certification Office

Aircraft Certification Systems Evaluation Program Aircraft Evaluation Group Flight Standards Service Aircraft Certification Service Aircraft Flight Manual Aircraft Flight Manual Supplement Appeal Panel Authorized Representative Civil Aviation Authority Designated Airworthiness Representative Designated Alteration Station Designated Engineering Representative Designee Information Network Designated Manufacturing Inspection Representative Delegation Option Authorization Evaluation Panel Federal Aviation Administration Flight Standards District Office Instructions for Continued Airworthiness Manufacturing Inspection District Office (includes Manufacturing Inspection Satellite Office - MISO) Master Minimum Equipment List Memorandum of Understanding Organization Management Team Principal Engineer Principal Inspector Production Limitation Record Program Notification Letter Special Federal Aviation Regulation Supplemental Type Certificate Supplemental Type Inspection Report Type Certificate Data Sheet TC Type Certificate/Type Certification TIA Type Inspection Authorization TIR Type Inspection Report

MMEL MOU OMT PE PI PLR PNL SFAR STC STIR TCDS

1-12.FORMSILETTERS/FORMATS. Appendix 1, Sample Forms and Letters provides examples of appropriate forms, letters, and formats referenced in this order.

Page 3 (and 4)

817/02 8100.9

CHAPTER 2. FAA ROLES AND RESPONSIBILITIES

2-1. GENERAL. This chapter describes FAA roles, responsibilities, and processes for application, selection, authorization, and oversight of DAS, DOA, and SPAR 36 authorized organizations.

CHAPTER 2. FAA ROLES AND RESPONSIBILITIES

2-2. ORGANIZATION MANAGEMENT TEAM (OMT). Management of an authorization holder requires both supervision and oversight of the functions performed by the organization, thus, oversight will require a combination of ACO, Certificate Management Office, MIDO, and Flight Standards District Office (FSDO) personnel as appropriate to the ARs and the authorized functions performed by the organization. The OMT members must be knowledgeable and experienced in the functions the organization performs. (See OMT definition.)

2-3. APPLICATION.

a. Application. Applications will be submitted to the appointing office in accordance with the applicable regulations. The application letter must state the authorization and limitations sought, including the products on which the authorization will be utilized.

(1) DAS and DOA applicants must submit applications to the geographical ACO. The ACO should provide a written response within 30 days to the applicant, acknowledging receipt and providing an estimated date to complete their evaluation.

(2) SFAR 36 applicants must submit applications to their managing FSDO. The FSDO inspector assigned should follow the procedures in Order 8300.10 for the coordination of the application with the ACO.

(3) AR Packages. Authorized Representatives are not designees under the requirements of 14 CPR part 183. However, ARs do perform functions comparable to designees. Prior to recommending ARs to the FAA, the organization must evaluate the proposed AR's qualifications using the applicable criteria found in Order 8100.8, Designee Management Handbook, for the function(s) the ARs will be performing. The organization selection process must be defined in their procedure manual and meet the intent of the selection process found in Order 8100.8. The organization application should contain evidence of the organization's review of the proposed ARs, along with a summary of each AR's qualifications. The organization need not submit AR qualification summaries for existing designees, unless the proposed functions (to include type and complexity) were not previously delegated to the AR.

Par 2-1

b. Application Content. The application must include:

(1) FAA Form 8100-8, DAS, DOA, or SPAR 36 Statement of Qualifications.

(2) A cover letter stating the authority requested under the applicable regulations and limitations for the authorization, to include the products on which the authorization will be utilized. The cover letter must also contain a brief statement as to the applicant's eligibility in accordance with applicable regulations.

(3) A detailed description of how the eligibility and qualification requirements are satisfied as defined in paragraph 3-2 of this order, and the specific eligibility requirements as defined in chapters 4 through 6 of this order (e.g., having a TC, PC, 14 CPR part 145, 14 CPR part 121).

( 4) The authorization holder administrator's resume as outlined in paragraph 3-7a.

(5) A listing of the proposed staff (ARs) and their associated resumes outlining their experience and qualifications.

(6) A procedure manual that includes the content as required by paragraph 3-8 of this order, and the specific detail as outlined in the Procedure Manual example in appendix 2, Sample DAS, DOA, SPAR 36 Procedure Manual, of this order.

2-4. SELECTION PROCESS.

a. Initial Screening. Upon receipt of the application, the ACO (DAS and DOA) or FSDO (SPAR 36) will determine if the applying organization meets the following basic requirements:

(1) The FAA has a need for the new appointment.

(2) The organization holds the current certificate(s) as defined in the eligibility sections of Chapters 4 through 6, as the basis for the authorization in accordance with the FAA regulations.

(3) The organization has a successful and recent history with the FAA for the functions desired and is familiar with the applicable FAA certification processes.

(4) The organization's staff possesses integrity,

Page 5

sound judgment, and a cooperative attitude toward the FAA.

b. Formation and Review by the Evaluation Panel. After determining that the applicant is eligible, the appointing office must organize a panel of FAA personnel required for the evaluation of the application. The team may consist of the accountable directorate representative, the geographic MIDO PI(s), FSDO, appropriate Aircraft Evaluation Group (AEG) representatives, and appropriate ACO personnel. The panel selected must be qualified and familiar with the functional areas for which the delegation is sought and experienced with the appropriate DAS/DOA/SFAR 36 processes. The Evaluation Panel (EP) should be comprised of the prospective Organization Management Team (OMT) in order to determine the appropriateness of the appointment or denial. The panel will collectively determine if the applicant is qualified for the authorization. The panel must consider the following criteria to determine whether an authorization is warranted:

(1) The FAA must have a need for the appointment.

(2) The FAA must have adequate personnel to properly oversee and support the appointment.

(3) The applicant must employ, or have available, a staff of qualified engineering, flight test, and inspection personnel as appropriate.

(4) The applicant must have adequate facilities appropriate to the authorization desired.

(5) The applicant's administrator and ARs must possess integrity, sound judgment, and a cooperative attitude.

c. Evaluation of Authorized Representatives (ARs). As authorization holder staff members, ARs are performing functions comparable to individual DERs, DARs, and DMIRs. Therefore, the applicant must evaluate the proposed ARs to the same standards and criteria for designees performing comparable functions as contained in Order 8100.8. The FAA managing offices should review the AR packages to ensure the criteria of Order 8100.8 are met. Existing FAA designees may be approved as AR staff members without further technical review of their qualifications if they will be performing similar functions.

d. Procedure Manual Approval. After determining that the applicant is qualified, the EP must review the proposed procedure manual and ensure it establishes a process that complies with the applicable requirements of

14 CFR, and applicable FAA Orders. After the EP approves the procedure manual, the managing office(s) shall execute the Memorandum of Understanding as described in paragraph 3-4 with the officials of the organization.

Page 6

e. Denial of DO AID AS/SF AR 36 Applications. Denial of an application for a DOA/DAS/or SFAR 36 authorization must be made in writing (i.e., letter of denial) to the applicant and sent via registered mail within 30 days of the decision. The letter of denial must explain the specific reasons for the denial and detail what steps the applicant may take before the FAA will reconsider their application. (See appendix 1, figure 1 for an example of a denial letter.)

f. Appeal Panel (AP). If not satisfied with the decision made by the appointing office, an applicant may, within 60 days receiving notification of the denial, notify the FAA in writing and request a review by an AP. The AP will consist of at least two office managers and a senior ASE/ASIIFTP who were not part of the applicant's EP. The AP will consider all available information and may interview the applicant, applicant's staff, EP personnel, or may invite other persons to be resources at their deliberations. The AP's decision is reached by consensus and all decisions are final.

g. Appeal Panel Authority. The AP may uphold the previous decision; or

(1) May override the previous decision with a new decision and provide appropriate justification; or

(2) May request that any part of the appointment process be repeated citing new information that the EP must review, or issue additional instructions and clarifications to the EP. The AP may direct that the previous EP conduct the review, or it may direct the appointing office to appoint a new EP.

h. Functioning of the Appeal Panel. The AP shall determine if the appointment process was conducted properly by reviewing the documentation in the appellant's file, the evaluation panel's written justification, interviewing members of the EP, and reviewing other information deemed appropriate. If discrepancies are found, appropriate actions shall be taken to ensure the future integrity of the appointment process. The AP shall complete their deliberations by consensus within 60 days from the date of the appeal. The decision must be documented and signed by each AP member and transmitted to the appointing office manager. The appointing office manager will notify the appellant of the decision by the AP by letter. If the AP is not able to reach a decision by consensus within the 60 day period, the appointing office manager will make the final decision and notify the appellant. The decision is final whether made by the AP or appointing office manager.

2-5. AUTHORIZATION. After all elements of the selection process have been completed (including signature of an MOU), the appointing office shall

Par 2-4

provide the applicant proof of authorization. Proof of authorization shall be an authorization letter issued by the appointing ACO and coordinated with the MIDO and AEG for DAS and DOA, and jointly signed between the ACO and certificate managing FSDO for SFAR 36 authorizations. The authorization letter shall note the authorization number from the Designee Information network (DIN), the limitations of the authorization, the location of facilities, and any technical limitations. The nature and scope of authorization limitations may be of any form appropriate to the authorization. It may be limited for lack of certain equipment, or limited to certain types of products. Examples of authorization letters are in appendix 1, figures 3, 4, and 5. The appointing office shall also provide the names and phone numbers of the OMT members.

NOTE: It is the appointing office's responsibility to input the appropriate information into DIN. (See chapter 7 of this order.)

2·6. OVERSIGHT

a. Supervision. The OMT will monitor the authorization holder's processes and procedures (e.g., training procedures, lines of communication, employee responsibilities and duties, and project management activities) as described in its procedure manuaL As determined necessary, the OMT must also review individual AR's project work for accuracy. Frequency of such inspections should be based on the experience of the AR and the quality of work performed on previous projects. If personal meetings or inspections are re~uir~d, they should be coordinated through the authonzatton holder's administrator. The authorization holder shall maintain its processes in a manner consistent with the approved procedure manual and applicable FAA regulations and orders. Supervision intervals may be tailored to the organization, but must occur at least annually. Intervals should be established by the OMT based upon the organization's experience and adequacy of previous certification efforts or compliance findings ~s!ng their authorization. Frequency also depends on the fac1hty. Small facilities with superior internal controls and limited types of approvals may need only one or two visits a year, while others with increased complexity may need quarterly visits by OMT members.

2·6. OVERSIGHT

NOTE: The ACO is responsible for oversight of the administrator, the engineering and flight test staff, and the certification procedures prescribed in the procedure manual for all authorization types. The MIDO is responsible for oversight of the inspection and airworthiness staff and procedures for the functions they perform for DASs and DOAs. The FSDO is responsible to keep the ACO informed of any changes in the certificate for which eligibility was determined. The FSDO is also responsible for the certificate

Par 2-5

management activity associated with an SFAR 36 holder.

(1) The authorization holder will provide project notification to the OMT lead. It is incumbent on the authorization holder to maintain open lines of communication with the OMT and to keep them apprised of the status of these projects. Based on a review of the project notifications, the FAA may elect to participate in the project or require the authorization holder to provide the FAA with periodic project reviews or status reports.

(2) The OMT must:

(a) Review periodic self-audit reports generated by the organizations for possible discrepancies. The ACO (DAS or DOA) or FSDO (SFAR 36) must acknowledge receipt of the report, coordinate the review with the other managing office(s), and coordinate corrective actions if necessary.

(b) Ensure the authorization holder complies with the approved procedure manuaL

(c) Ensure the authorization holder and ARs have access to current policy and guidance.

(d) Verify that the ARs are acting within the scope of their authority in accordance with the requirements of this order, the procedure manual, and other applicable FAA orders.

(e) Review, as necessary, the accuracy of official documentation initiated by the authorization holder. Review completed project records on a sampling basis (e.g., airworthiness, conformity, compliance, and type design data).

(f) Ensure the appropriate corrective action is taken in accordance with FAA Order 2150.3, Compliance and Enforcement Program. The OMT lead is responsible for coordinating all compliance and enforcement activity.

with the addressed.

(g) Ensure that any other item associated authorization holder's authorization is

b. Evaluations. The evaluation of an authorization holder's performance will be based on a systems approach to the management and supervision of the DOA, DAS, or SFAR 36. This is in contrast to the existing designee systems, which focus the FAA's efforts on monitoring the individuals authorized to perform the functions. It is not the FAA's intention to focus on the activities of individuals, but instead on the performance of the authorization holder's system and how the functions are carried out. The FAA always retains the authority to monitor and surveil the DOA, DAS, or

Page 7

SFAR 36 to the extent necessary to ensure that the authorized functions are carried out. The criteria used to evaluate compliance with the authorization holder's responsibilities should have the following elements:

(1) Adherence to procedures. The FAA focus will be on adherence to procedure manual processes (systems performance evaluation). Any information used by the authorization holder to make a finding of compliance to applicable FAA regulations may be reviewed.

(2) Integrity, sound judgment, and cooperative attitude. ARs are honest and completely forthcoming with information in all dealings concerning their authority.

(3) Technical competence in area of appointment. The technical work of the ARs results in appropriate compliance, conformity, and airworthiness findings.

(4) Knowledge of the applicable certification processes.

c. ACSEP Evaluations. The OMT will conduct evaluations of the authorization holder in accordance with Order 8100.7, Aircraft Certification Systems Evaluation Program (ACSEP).

d. Technical Evaluations. The OMT must conduct evaluations of the methods, data, and articles used to substantiate compliance to FAA regulations. These evaluations must be performed at least every two years. If possible, the technical evaluations may be scheduled simultaneous with ACSEP evaluations. The evaluation should determine whether the products and data produced using .the authorization are technically acceptable, comply with the FAA regulations and FAA policy, and were produced using sound engineering judgment and practices. Non-scheduled evaluations may be conducted as situations warrant. Procedures and criteria for conducting technical evaluations are contained in appendix 5, Technical Evaluation Procedures and Criteria.

e. Results of FAA Evaluations and Surveillance and Follow-on Corrective Action. The OMT will notify the authorization holder's administrator of any noncompliance requiring corrective action per Order 2150.3. If any part of the authorization holder's system does not meet the requirements of the delegation, then the FAA may require changes to the system and may mandate changes to the authorization. The OMT will ensure corrective action is taken for all findings and observations resulting from ACSEP, technical evaluations, or routine supervision by having a OMT representative physically visit the facility. ACSEP corrective actions are prescribed in the ACSEP guidance material. All findings and observations must be tracked and re-evaluated after corrective action is implemented.

Page 8

f. General.

(1) FAA Files. The managing FAA offices will each maintain a file for each authorization they manage. The file must contain at least the following as applicable:

(a) Completed DAS/DOA/SFAR 36 Application package.

(b) Certificate Management records (if applicable).

(c) Copy of the letter of authorization.

(d) General correspondence (non project specific).

(e) Copy of the current procedure manual.

(f) Records of supervision, monitoring, and evaluations.

(g) Records of discussion or counseling.

(h) Copy of summary activity report(s) (if applicable).

(i) Copy of current Forms 8130-13 for ?ut-of-geographic-area work since last reporting period, 1f applicable.

(j) Enforcement Investigative Reports (EIR).

(2) Revisions to Procedure Manual. The OMT will review proposed revisions to the procedure manual including proposed AR changes. If the changes are acceptable, the OMT will approve the revisions.

(3) AR Changes. The FAA must find proposed ARs acceptable before they may perform any functions for the organization. ARs must be qualified to the same criteria found in Order 8100.8 for comparable functions. The authorization holder must evaluate the proposed AR using the procedures prescribed in their procedure manual prior to submittal to the FAA. The authorization holder must send the FAA documentation showing the evaluation and recommended approval of the proposed AR. The OMT should verify the process described in Order 8100.8 is used to evaluate proposed ARs, and to evaluate requested changes in authority for existing ARs. The OMT shall notify the authorization holder of their decision (denial/approval) on AR changes within 15 working days. Upon approval, the AR shall be added to the procedure manual.

(4) Guidance Information. The FAA will assist all authorized organizations in acquiring required directive and policy material. Access to most FAA

Par 2-6

regulations, directives, and advisory circulars of interest to authorization holders is available on the Internet at http://av-info.faa.gov/dst. The OMT should provide copies of policy information and interpretive material not available via the Internet.

Par 2-6

Page 9 (and 10)

817/02 8100.9

CHAPTER 3. DAS/DOA/SFAR 36 QUALIFICATIONS, RESPONSIBILITIES

CHAPTER 3. DAS/DOA/SFAR 36 QUALIFICATIONS, RESPONSIBILITIES

AND AUTHORITY

3-1. GENERAL. This chapter provides general requirements applicable to organizations seeking a DAS, DOA, or SFAR 36. This chapter also establishes general procedures for obtaining and maintaining a DAS, DOA, or SFAR 36, and describes the general functions and limitations that apply to all authorization holders. The specific requirements for a DAS, DOA, or SFAR 36 are addressed in Chapters 4 through 6 of this order, as applicable.

AND AUTHORITY

3-2. QUALIFICATIONS. Later paragraphs of this order specify eligibility requirements for each authorization type.

a. The applicant must meet the qualification criteria defined in this paragraph and must also comply with the specific eligibility requirements defined for DAS, DOA, or SFAR 36 in chapters 4 through 6 of this order, as applicable.

b. The FAA may grant authorizations to qualified organizations when:

(1) The organization has sufficient workload applicable to the authorization sought.

(2) There is a benefit to the FAA in granting the authorization, and the FAA has the ability to manage the authorization.

c. The FAA does not issue DOAs, DASs, or SFAR 36s to non-U.S. located applicants. An applicant must meet the appropriate Title 14 CFR requirements as noted in chapters 4 through 6 of this order and the following qualification criteria in order to be considered for an authorization:

d. The applicant's management must have demonstrated integrity in its experience with the FAA and have made a commitment to act with integrity in finding compliance to the regulatory requirements. In addition, the applicant's proposed administrator and ARs must possess unquestionable integrity, sound judgment, and cooperative attitude.

e. The organization must employ an authorization holder administrator(s) and employ, or have available, as appropriate for the delegation sought, a staff of ARs who meet the qualification criteria of this order. DAS and SF AR 36 authorization holders must have appropriate staff who meets the requirements of 14 CFR part 21, § 21.439(b) or SFAR 36 paragraph 5b, as applicable.

Par 3-1

f. The organiL.ation must have sufficient (as determined by the FAA) resources to perform the level of designation sought. The organization must have a thorough working knowledge, as appropriate to the delegation sought, of the FAA regulations, methods of compliance, policy, and procedures.

g. The organization must have adequate facilities appropriate to the authorization desired.

h. The organization must have a successful and recent history of certification work with the FAA.

i. The organization's staff must possess integrity, sound judgment and a cooperative attitude toward the FAA.

3-3. RESPONSIBILITY. DAS/DOA/SFAR 36 authorized organizations act as representatives of the Administrator when performing the functions they have been delegated. These authorized organizations and their staffs are guided by the same regulations, directives, policies, guidance and procedures applicable to FAA personnel performing similar functions.

a. Authorization Holder. The authorization holder shall assign an administrator who must ensure that the ARs have sufficient time and resources to maintain cognizance of the regulations, directives, and guidance related to their assigned AR duties and to prepare the necessary reports and related forms separate from other company duties. While discharging the duties of authorization holder, the administrator shall report to a level of management high enough to enable the DOA, DAS, or SFAR 36 to administer duties for the FAA without undue pressure or influence from other organizational segments or individuals. The authorization holder must ensure that the administrator and ARs remain free of any restraints that would limit the DOA's, DAS's, or SFAR 36's ability to ensure that authorized functions are performed in compliance with FAA regulations. The authorization holder shall allow the FAA to inspect, evaluate or surveil the facilities, products, parts, components, processes, or appliances, records. and procedures associated with DAS/DOA/SFAR 36.

b. Delegation administrator and ARs. The authorization holder must ensure that the administrator and ARs act in an independent and impartial manner when exercising their FAA authority. The administrator and ARs must be aware of and avoid potential conflicts of interest between their duties and responsibilities to the FAA Administrator and their roles as employees of the

Page 11

authorization holder.

3-4. MEMORANDUM OF UNDERSTANDING. Authorization holders must agree to exercise the same care, diligence, judgment, and responsibility when performing the delegated functions as would be exercised by the FAA. This commitment starts at the senior management level of the organization and extends through the proposed ARs. In recognition of this, senior management of the organization and the FAA appointing office(s) will sign a memorandum of understanding (MOU) prepared by the OMT, which outlines the charter, authority, and responsibility of the organization. The MOU will be signed before appointment. In addition, whenever the signatories of the MOU authorization holder or the lead administrator change, a new MOU must be generated by the OMT and signed by both the organization and the FAA. If the new senior management refuses to sign the MOU, the appointing office shall terminate the authorization. The OMT will recommend any updates of the MOU to the appointing office as appropriate. Appendix I, figure 6 contains an example of an acceptable MOU.

NOTE: All MOUs must contain a statement setting forth the FAA authority and responsibility to conduct oversight of all delegated activities. In addition, authorization holders must cooperate with the FAA during oversight activities.

3-5. STAFF AUTHORITY AND RESPONSIBILITY.

a. DAS/DOA/SFAR 36 administrator. The administrator is responsible for the overall management of the authorization and the coordination and completion of their authorized functions. The administrator may be authorized to sign specific documents as specified in the procedure manual. The administrator is responsible for all communication and interface with the OMT. The administrator will communicate with the OMT lead on matters pertaining to FAA interface. The administrator must ensure that the organization is following the procedures prescribed in their procedure manual and that their processes comply with all the requirements of the applicable FAA regulations and policies. An organization may have multiple administrators, however the organization must identify one as the "LEAD" administrator.

b. Authorized Representatives. Authorized Representatives within the organization have the authority to make findings of compliance, determination of conformity, or airworthiness approvals on behalf of the FAA. The ARs must have sufficient authority within the organizations to make binding decisions to ensure that products meet the applicable regulations, conform to the type design, and are in condition for safe operation. The procedure manual must identify the ARs and their

Page 12

approval authority.

c. Separation of Duties. DAS, DOA, and SPAR 36 organizations and any designees they may utilize as ARs should be aware that the delegated functions they perform as a DER, DMIR, or DAR are separate and distinct from the functions they perform as an AR of these organizations.

d. Conflict of Interest. It is important that the ARs and the organization be aware of and avoid potential conflicts of interest between the role of the administrator and AR acting for the FAA and the role as an employee of the authorization holder. The AR, when performing delegated functions for the FAA, must be independent from the organization's normal engineering and quality control chain of command and report only to the administrator. This should prevent the situation where, for example, the employer asks the AR to use their authorization improperly, or applies pressure on the AR to compromise their FAA responsibility. It is the organization's responsibility to prevent such situations. Failure to do so will result in termination of their authorization. Authorization holders must ensure that there are no conflicting constraints placed on the ARs within the organization.

3-6. INHERENTLY GOVERNMENTAL FUNCTIONS. Authorization holders may only be delegated the functions allowed by the regulations and this order. Following are examples of inherently governmental functions or those that the FAA chooses not to delegate. They may not be performed by a authorization holder:

a. Issue a TC, amend TC or PC.

b. Make findings of equivalent safety.

c. Grant exemptions.

d. Issue special conditions.

e. Approve or issue ADs.

f. Make determination of applicable FAA regulations (e.g., certification basis).

g. Establishing a means of compliance not previously accepted by the FAA.

h. Make findings reserved by the FAA.

i. Surveillance and oversight.

j. Approval of quality system and procedure manual.

Par 3-3

3· 7. STAFF QUALIFICATION REQUIREMENTS.

a. DAS/DOA/SFAR 36 administrator. Each DOA, DAS, and SFAR 36 must employ an administrator(s) who serves as the focal point for the FAA coordination. The administrator(s) is responsible for managing the DOA, DAS, or SFAR 36 activities and communicating with the OMT. Therefore, the administrator(s) must have not only the technical experience associated with the type of authorization, but also a broad range of management experience that will enable the administrator(s) to effectively manage all aspects of the designation. Although not required, the administrator may also be an AR. These qualifications must be presented in a resume, which clearly demonstrates the qualification criteria have been met. Prior to FAA approval it must be shown that the administrator(s) has the proper level of responsibility, authority, and ability to assure compliance with approved procedures. The following are the minimum requirements for an administrator:

(1) Minimum of five (5) years of experience working with the FAA on projects similar to those being performed under the authorization. This working experience must include various levels of technical airworthiness responsibilities and experience (e.g., compliance engineer, quality assurance inspector, manufacturing inspector, airworthiness inspector, etc.) as well as management experience in the technical disciplines (e.g., engineering, manufacturing, airworthiness, etc.). The collective technical, certification processes, and management experience of the administrator(s) must pertain to the type of authorization sought.

(2) Comprehensive knowledge of FAA Policies, procedures and regulations associated with the authorization.

(3) Demonstrated sound judgement, integrity, and cooperative attitude toward the FAA.

(4) Possess sufficient technical education, training, skill, and experience applicable to the type of authorization sought.

b. AR Qualification Requirements. DOA authorization holders must employ a staff of ARs who can make findings on behalf of the FAA DAS and SFAR 36 holders must employ or have available a staff of ARs who can make findings on behalf of the FAA ARs are not required to be a DER, DMIR, or DAR.

(1) Engineering and Flight Test ARs. Engineering and flight test ARs making findings of compliance to the airworthiness standards must meet the requirements for Designated Engineering Representative (DER) appointment defined in Order 8100.8, Designee Management Handbook, as appropriate to the functions

Par 3-7

authorized. However, the requirement to have significant working experience in a direct working relationship with the FAA may be satisfied by having significant working experience within the authorization holder's organization.

(2) Inspection ARs. Inspection ARs performing authorized functions must meet the specific qualification criteria for similar function(s) as is described in Order 8100.8 (e.g., conformity, export, issuance of airworthiness certificates, etc.). However, the requirement to have significant working experience in a direct working relationship with the FAA may be satisfied by having significant working experience within the authorization holder's organization.

(3) Use of Existing Designees. Proposing the use of existing designees (i.e., DER, DAR, and DMIR) as ARs to perform similar functions should decrease the time and effort required for the FAA to verify qualifications and approve authorized functions.

(4) Expanding the AR Authority of Existing Designees. Both the applicant and the FAA personnel involved should ensure that if the approval authority desired for an AR exceeds the authority already authorized under their existing delegation, or adds functions, or areas, not currently approved, the organization must determine and the evaluating FAA personnel must verify that the individual is qualified to the same criteria found in Order 8100.8 for the additional areas or functions.

(5) AR Trainees. If a proposed AR meets all the requirements except for direct experience working with the FAA, the proposed AR may be designated as an "AR Trainee." Upon approval as an AR trainee, the organization will provide working arrangements to allow the trainee time to prove his or her ability to the authorization holder. The procedure manual must include a process for trainee development if trainees are utilized. For example, review of the trainee's work by other ARs, or direct supervision of the trainee's findings by the FAA. AR trainees may not make findings that are not subsequently verified by either a staff AR or the FAA. Trainees may only review data and do not have final approval authority.

3-8. PROCEDURE MANUAL. Each authorized organization must perform all authorized functions in accordance with their FAA-approved procedure manual. Procedure manuals must follow the format of appendix 2 and address the applicable detailed requirements provided in chapters 4 though 6. The procedure manual and revisions are to be coordinated with the appropriate disciplines (such as flight test, quality, engineering, etc.) within the DOA/DAS/SFAR 36 organization prior to submittal to the FAA

a. Content. In addition to the requirements in

Page 13

Chapters 3 through 6 of this order, the procedure manual must contain the following:

(1) Cover page with signature blocks for the FAA and authorization holder's administrator.

(2) Table of Contents.

(3) Log of Revisions.

(4) List of Effective Pages (may be optional if manual is reprinted and paginated at each revision).

(5) Description of how to process changes to the manual.

(6) Limitations of the authorization. DAS and SFAR 36 procedure manuals must specifically identify the models of products and types of projects authorized.

(7) Description of the authorization holder's facilities (DAS and SFAR 36 only).

(8) Listing of ARs and their authorized functions and forms authorized to sign. The procedure manual must include the name(s), signature(s), impression of stamps (where appropriate), and responsibilities of the individual ARs performing FAA functions and identify the functional areas and limitations for the ARs in accordance with Order 8100.8. See appendix 2 for sample.

NOTE: Signatures, as shown in appendix D of appendix 2 of this order, may be maintained in a separate documented file.

(9) Description of the procedures used in performing authorized functions.

(10) A sample of the forms to be used to indicate inspection acceptance or findings of compliance. FAA Forms must be used wherever applicable. Execution instructions must be provided if using other than FAA Forms.

(11) Selection criteria for appomtmg ARs and procedures for expansion of AR's authority which includes the process for AR Trainee development, if Trainees are utilized.

(12) Records required to be kept by the regulations and this order. See chapters 4 though 6 for specific record files.

(13) Description of the training courses that are to be required of each AR and where the AR will acquire the training. Include both standardization and recurrent training per paragraph 3-9b.

(14) Process for revising the procedure manual and obtaining FAA approval for revisions.

Page 14

(15) Changes requiring approval will be defined in the procedure manual.

(16) Prior to approval of these changes, the organization may continue to perform only those functions not affected by the change.

(17) Self evaluation procedures.

b. Approval. The FAA must review and approve the procedure manual prior to the organization performing any authorized functions. The procedure manual must include the name(s), signature(s), and responsibilities of the administrator(s).

c. Changes. Changes requmng revisiOn to the procedure manual (such as personnel changes) must be clearly identified (e.g., revision bars, highlighting, etc), submitted to, and approved by the FAA. The authorization holder may not place submitted changes into effect, including changes to ARs or procedures, until approval of the changes is received.

d. FAA Policy Changes. In situations where a procedure manual has not been updated to the latest FAA policy, FAA policy takes precedence. The procedure manual must be updated within 120 days of the issue date of the policy change.

3-9. TRAINING.

a. Company Provided Training. DAS, DOA, and SF AR 36 organizations must provide training to staff members to ensure continued compliance with the approved procedure manual and the regulations. Training is required upon approval for ARs, with recurrent training at least every two years. The authorization holder must allow FAA evaluation of the training material. If the training is presented in a classroom format, the organization must allow FAA attendance at the training session, if requested. The training should consist of at least:

(1) Review of the functions delegated to the authorization.

(2) Review of the organization's processes and procedure manual.

(3) Review of the AR's authority and responsibility when performing authorized functions.

(4) Review of FAA policy and guidance material.

(5) Review of representative documentation completed by the authorization holder.

(6) DAS training must also address the need to consider the product manufacturer's design philosophy,

Par 3-8

principles, the operational assumptions of the manufacturer, and actual operator procedures during the approval of alterations. The training should also address possible methods to obtain this information for projects accomplished by the DAS.

b. FAA Seminars. In addition to the training attended within the company, ARs must also attend FAA sponsored seminars. FAA seminar schedules are available via the internet at the designee home page, http://avinfo.faa.gov/dst.

(1) DAS, DOA, and SF AR 36 administrators must attend a DAS/DOA/SFAR 36 Standardization Seminar upon approval as an administrator, and every two years thereafter. They must also attend FAA provided seminars according to paragraph (2) below if they have authority as an AR.

(2) ARs must attend FAA provided seminars as required of designees performing similar functions in accordance with Order 8100.8 and Order 8110.37, Designated Engineering Representative (DER) Guidance Handbook.

c. Training Records. DOAIDAS/SFAR 36 organizations must maintain records of AR 's attendance at company and FAA training.

3-lO.DURA TION OF APPOINTMENTS. Authorization as a DAS or DOA is effective until surrendered or until the FAA suspends, revokes, or terminates the authorization. Authorization as a SPAR 36 is effective until the termination date of SPAR 36, unless otherwise surrendered, suspended, revoked, or terminated. Authorization holders must notify the appropriate managing offices within 48 hours of any change (including personnel changes) that could affect the ability of the holder to meet eligibility requirements.

a. Changes in ownership of the organization which result only in a name change with no change in organizational structure, etc., may be executed by reissuing the authorization letter and MOU, along with revising the procedure manual to reflect the new name.

b. Changes within the DAS, DOA, or SF AR 36 involving personnel or structure within the organization or major changes to the organization may require the holder to surrender its authorization and submit a new application. Authorization holders should notify their managing offices prior to any planned changes to determine how such changes will be handled.

3-11. SELF EVALUATION. The organization must perform periodic audits that re-validate the personnel and procedures used within the authorization holder's organization as approved within their procedure manual. Authorization holders must perform these audits at least

Par 3-9

annually. The procedure manual must also identify the general audit procedures and frequency as agreed to by the OMT. Self Evaluations do not replace the FAA Technical Evaluations or ACSEP Evaluations detailed in paragraphs 2-6c, and d of this order.

a. Personnel Audits. Personnel audits must evaluate the ARs using the processes and oversight criteria contained in Order 8110.37 and 8100.8, as appropriate. The DOA/DAS/SFAR36 organization should review individual AR's project work for accuracy. Frequency of such audits should be based on the experience of the AR, the quality of work performed on previous projects, and as established in the procedure manual.

b. Certification Process Audits. The certification process audits must include each element of the procedure manual, such as inspection of design and/or repaired articles to ensure conformity to type design; technical data evaluation; and compliance with the airworthiness standards, etc.

c. Evaluation Records. The organization must maintain records of the self-audit and provide copies to the OMT upon request.

d. Self-Disclosure. The FAA will not ordinarily seek to impose a civil penalty on an authorization holder if: the holder immediately notified the FAA of the apparent violation after detecting it and before the agency learned of it. The apparent violation must have been inadvertent; the apparent violation does not indicate a lack of or reasonable question of basic qualification of the authorization holder; immediate action must have been taken, or begun to have been taken, upon discovery to terminate the conduct that resulted in the apparent violation; the operator must develop and implement a comprehensive corrective action satisfactory to the FAA. Further guidance on self-disclosure reporting may be found in Order 2150.3.

NOTE: Ordinarily, the FAA will not forego legal enforcement action if the authorization holder informs the FAA of the apparent violation during routine FAA investigations/inspections (that time from which the inspection team physically arrives on site until the time the team departs at the completion of the inspection) or in association with accidents and incidents.

3·12. MANUFACTURING WORK ACTIVITY. DAS and DOA authorization holders must document their manufacturing work activity on the Summary Activity Report, as described in Order 1380.48, Manufacturing Inspection Management Information System. The organization's report must be submitted on a frequency as prescribed in the procedure manual. A sample Summary Activity Report is found in appendix 1, figure 10.

Page 15 (and 16)

8/7/02 8100.9

CHAPTER 4. DESIGNATED ALTERATION STATIONS

CHAPTER 4. DESIGNATED ALTERATION STATIONS

4-1. GENERAL.

a. General. This chapter provides information and guidance concerning the authority and procedure'> of Designated Alteration Stations (DAS).

b. Eligibility. Each DAS is required by 14 CFR § 21.439(a) to be either a domestic repair sration under the provisions of 14 CFR part 145, an air carrier or commercial operator, or a manufacturer of a product for which it has alteration authority under the provisions of 14 CFR part 43, § 43.3(j). An applicant must have a demonstrated knowledge of the Supplemental Type Certificate (STC) process and must have been previously granted STCs under standard procedures of 14 CFR part 21.

NOTE: The word "or" was inadvertently not incorporated in 14 CFR § 21.439(a). The preamble to this regulation clearly denotes that the intent of this regulation was to allow any one of the three organizations noted above to apply and be considered for a DAS authorization.

c. DAS Authority. The primary authority of a DAS is the ability to issue STCs in accordance with

14 CFR § 21.431. In support of this, the DAS may issue special airworthiness certificates in the experimental category to show compliance for aircraft that are altered by the DAS. Additionally, the DAS may amend standard airworthiness certificates for those aircraft previously issued experimental certificates that are found to conform with the approved STC and arc in a condition for safe operation.

d. Limitations.

(1) The STC approval authority of the DAS will be limited to the types of products or articles it is appropriately qualified and certified to maintain under the existing certificate used as a basis for the authorization.

(2) The OMT may impose any limitations that may be necessary, taking into account the DAS staffing and facilities. For example, the OMT may exclude the authority to approve alterations that require flight test or pilot evaluation if the DAS does not employ, or have available, a qualified flight test pilot. The OMT must iimit

the DAS's authority based upon the qualifications and capability of the DAS ARs and authorizatiOn holder limitations. Approval of test plans is one area where the OMT may decide to retain authority, requiring them to be submitted for approval by the ACO. The OMT should carefully evaluate the DAS's capability and experience prior to delegating the approval of test plans to the DAS.

Par 4-1

(3) The DAS may not t1e delegated authority that involves areas reserved for FAA approval or require the development of issue papers or regulatory act! vity (see paragraph 3--6). For example, a DAS must obtain FAA approval of:

(a) Interpretations of the airworthiness standards

(b) Compliance findmgs mvolvmg the acoustical change requirements of 14 CFR p:1rt 36 or the exhaust emissions change requiremenb of 14 CFR part 34.

(c) The application of equivalent safety provisions applied unJer the provisions of 14 CFR part 21.

e. DAS Responsibilities. The DAS must investigate and recommend correc:ive actions m accordance with 14 CFR s 21.4 77 for those matters identified by the FAA. Additionally, the DAS facility should take an active participation in the review of service difficulties submitted to the c•)mpany and notify tne FAA of any findings that rcquir<~d aJJpropriatc c.orrec:tive action.

(1) STC Data Files. The DAS must maintain and make available the data file as prescr~bed in 14 CFR § 21.493. All STC technical data files must be sent to the FAA as soon as the authorizatio!l is surTendered or terminated. In addition to the datn file required by \4 CFR § 21.493, the DAS STC technicai data files and amendments thereto mu~,t also contain tl:e following:

(a) Program Notification.

(b) STC Application.

(c) FAA Response to Program Notification.

(d) Equivalent Level of Safety Finding~.

(e) Special Conditions.

(f) Exemptions.

(g) Findings Form 81 00-9).

of Compliance (FAA

(h) Requests for Conformity (FAA Form 8120-10) and Statements of Conformity (FAA Form 8130-9).

(i) Conformity (FAA Form 8100-1).

Inspection Record

(j) AuthrJI'ized Release Ct:rtiticates (FAA Form 8130-3) issued for conformity,

Page 17

(k) Certification and conformity Plans.

(I) Completed Compliance Checklist.

(m) Type (FAA Form 8110-1).

Inspection Authorization

(n) Supplemental Type Inspection Reports (FAA Form 8110-26).

(o) Instructions for Continued Airworthiness (ICA) and Aircraft Evaluation Group acceptance.

Section.

List.

(p) Approval of test and analysis reports.

(q) Flight Manual approval page.

(r) Approval of Airworthiness Limitations

(s) Approval of referenced Master Drawing

(t) STC with original signature.

(2) Airworthiness Certification Files. The DAS must maintain copies of all airworthiness certification packages processed using the DAS authorization Airworthiness Products.

in accordance with Order 8130.2, Certification of Aircraft and Related

4-2. DAS AUTHORIZED FUNCTIONS.

a. STC Guidance. The DAS must follow the procedures prescribed in the procedure manual throughout the STC process. The process and data required must comply with the requirements of 14 CPR part 21, and should comply with the procedures for supplemental type certification contained in Order 8110.4, Type Certification. The procedure manual must identify any deviations to the procedures prescribed in Order 8110.4. Advisory Circular 21-40, Application Guide for Obtaining a Supplemental Type Certificate, contains guidance on STC projects. No STC projects may be accomplished using the DAS authority without FAA review and approval of the program notification described in paragraph 4-2c( I).

b. STC Program Considerations. The DAS authorization granted is based upon an organization's demonstrated capability to alter products and determine that alteration designs satisfy the airworthiness standards and are in a condition for safe operation.

(1) Additional Parties Involvement. Projects that involve numerous parties in the design, manufacture of parts, etc., require additional scrutiny on the part of both the DAS staff and the managing ACO. The managing ACO should evaluate the capability of the DAS to perform such projects, considering the experience and competence

Page 18

of the other parties involved, during the review of the Program Notification.

(2) Additional Knowledge. In addition to finding compliance to the airworthiness standards, the DAS is also responsible for finding that the altered product is of a proper design for safe operation. In order to determine this, the DAS must consider the product manufacturer's design philosophy, principles, and operational assumptions as applicable to the project involved. Such information may be obtained by reviewing available data such as; original type design data, type certification data sheets, flight manuals, operating procedure manuals or by past experience of the DAS staff. The DAS must also consider the actual procedures employed by the operator of the product and the impact of any alterations previously made to the product. The OMT should assess the DAS's experience and knowledge of these considerations when reviewing Program Notification Letters and determining FAA involvement.

c. STC Projects.

(1) Program Notification. The DAS administrator must submit a detailed Program Notification Letter (PNL) to the OMT lead early in the project containing the information in 14 CFR § 21.463(a)(l ). If the project scope or schedule is significantly revised, the DAS must resubmit the program notification and obtain concurrence from the FAA. Ry submitting a PNL, the DAS · is attesting that they have, or can obtain. the appropriate knowledge and understanding of the product manufacturer's design philosophy, principles and operational assumptions required to determine compliance with the airworthiness standards and determine that no unsafe feature or characteristic exists in the altered product. The program notification must:

(a) Include a certification plan that contains the information described in appendix 3. The compliance checklist in the certification plan must identify the AR responsible for finding compliance with each of the applicable regulations.

(b) Include a conformity inspection plan per appendix 4.

(c) Identify any novel or unusual aspects of the program including any international aspects, or foreign airworthiness authorities involved.

(d) Identify any design changes that are considered "significant" according to the definition in Order 8100.5, Aircraft Certification Directorate Procedures.

(e) Specify who will perform the design (excluding certification activities), if other than the DAS authorization holder, the scope of each parties'

Par 4-1

involvement in the design, and provide a description of how the DAS will manage the other parties activities. The DAS must ensure that all certification requirements are met and managed (e.g., periodic contacUmeetings with the company performing the design work to monitor design progress, issues of concern, and proposed modifications to the design and/or schedule, etc.).

(2) Program Notification Coordination. The OMT lead must coordinate with the OMT for review and concurrence of the original program notification, and any subsequent supplements and/or revisions. The DAS managing ACO should coordinate with the Type Certificate managing ACO as appropriate. In addition, the ACO is responsible for the normal directorate project notification requirements described in Order 8100.5. As part of the OMT review and approval of the PNL and the associated certification and conformity plans, the OMT must consider whether the DAS has, or can obtain, the appropriate knowledge and understanding of the product manufacturer's design philosophy, principles, operational assumptions, and actual operator procedures. The DAS holder must be rated appropriately to perform the alteration. The OMT must non-concur with projects they determine the DAS is not qualified to perform. The OMT lead must respond formaJiy, in writing, within 30 calendar days of receiving the PNL. The response must address the following points:

(a) Concurrence or non-concurrence of the proposed certification and or conformity plans.

(b) Acceptability of the certification basis; or any limitations, conditions, or objections.

(c) The names and other contact information of FAA engineers, manufacturing inspectors, AEG focal points, and administrative staff assigned to the project.

(d) Identify specific FAA involvement in the project and require the DAS to provide adequate notice to the FAA of activities in which the FAA will participate. The FAA response should include direction to the ARs for approval or recommend approval on FAA Form 8100-9.

(e) The requirement that the DAS must notify/coordinate with the OMT in a timely manner should the project's scope and/or schedule be significantly revised. Significant changes which should be reported include:

1 Changes in any parties involved, or the level of their involvement in the design or installation of the alteration.

2 Changes in the location of where the installation to support initial certification will be performed.

Par 4-2

3 Any schedule changes of activities in which the FAA will participate.

4 Certification methodology changes.

5 Any other changes deemed appropriate by the managing ACO.

NOTE: The OMT should determine any other types of changes that require notification, based on the DAS 's capability and project types. The OMT and the DAS administrator should ensure they understand the types of schedule/project scope changes that must be reported.

(3) FAA Participation. The FAA will participate in the determination of compliance as follows:

(a) Make determinations in areas reserved for the FAA, such as regulatory interpretations and equivalent level of safety findings. The DAS should request concurrence on the application of ali equivalent level of safety findings in writing.

(b) Determine compliance for the emissions and noise requirements of 14 CFR parts 34 and 36.

(c) Make determinations in areas evaluated by the AEG. These include Instructions for Continued Airworthiness, evaluation of operational suitability; changes to the Master Minimum Equipment List, Aircraft Flight Manual, Flight Crew Operating Manual; crew training, and emergency evacuation demonstrations.

(d) Determine compliance, when necessary, in areas involving new design concepts including the identification of those areas that require the formulation of special conditions per 14 CFR § 21.101(d) and areas where the DAS has no prior experience.

(e) Review data, tests, or technical evaluations if the DAS has not demonstrated a satisfactory capability during similar projects.

(0 Review areas where service difficulties have surfaced from previous DAS approvals.

(g) Participate in compliance findings in areas involving known safety related problems. For example, the ACO should review modifications affecting areas that have previously been the subject of Airworthiness Directive action to ensure that the proposed modification does not adversely affect the AD related change.

(4) Aircraft Evaluation Group Functions.

(a) Instructions for continued airworthiness (ICA) shall be prepared and/or identified for all STC projects and coordinated through the OMT

Page 19

lead. Development and acceptability of ICA may require early coordination.

(b) Aircraft Evaluation Group determinations of operational suitability, Master Minimum Equipment List revisions, crew training, etc., are not delegated to the DAS. The managing ACO must coordinate with the appropriate AEG to ensure that all program requirements are satisfied.

(5) Engineering Approval. Engineering and flight test ARs within the DAS are responsible for determining and documenting compliance to the airworthiness standards as required by the certification basis. The DAS must use FAA forms wherever possible unless the ACO approves alternatives through the procedure manual. The DAS engineering and/or flight test ARs are responsible for completing the following records, as applicable, to document compliance:

(a) FAA Form 8100-9, as shown in appendix 1, figure 7, must be used for compliance findings.

1 ARs must note on the FAA Form 8100-9 that the data approval is in support of a DAS project and is not a DER data approval.

2 ARs should "recommend" approval on the FAA Form 8100-9 for compliance findings in any areas defined in paragraph 4-2c(3).

(b) FAA Form 8120-10, Request for Conformity.

(c) FAA Form 8110-1, Type Inspection Authorization.

(d) Supplemental Type Inspection Report part II (flight test).

(e) FAA approved Aircraft Flight Manual Supplement.

(6) Conformity and Airworthiness Inspections. Inspection ARs are responsible for conducting and documenting inspections for the purposes of determining conformity to the design and establishing the airworthiness of the altered product. The conformity inspections are to be conducted in accordance with Order 8110.4. An FAA Form 8130-9, Statement of Conformity, must be completed and signed prior to the AR making final conformity findings for the article in question. The statement of conformity must be signed by the party responsible for the fabrication/assembly of the article, not the AR making the conformity determination. FAA forms must be used unless alternatives are approved

Page 20

through the procedure manual. Unsatisfactory conditions and/or deviations must be resolved and/or approved by Engineering ARs prior to test accomplishment. Prior to any compliance inspection or test, the DAS inspection ARs are responsible for the following records, as applicable, to document conformity with the type design of the end product, in-process parts, and test articles:

(a) Conformity Inspection Reports, including;

1 FAA Form 8120-10, Request for Conformity.

2 FAA Form 8100-1, Conformity Inspection Record.

3 FAA Form 8130-9, Statement of Conformity.

4 FAA Form 8130-3, Authorized Release Certificate (for conformity).

(b) FAA Form 8110-26, Supplemental Type Inspection Report (Part 1).

(7) Issuing Supplemental Type Certificates.

(a) General. The procedures of Order 8110.4 should be used for the completion and issuance of FAA Form 8110-2, Supplemental Type Certificate. The name on the STC should be the same as on their Air Carrier, Repair Station, or other certificate which is the basis for their DAS authorization, not the DAS authorization number or name if one exists. The DAS signature authority for STCs must be specified in the procedure manual. The STC may be issued after all documentation, inspections, and tests have been completed.

(b) Numbers. The ACO will issue STC numbers on either a project-by-project basis or as a block of numbers for the DAS 's use. The numbers will be issued in accordance with FAA Order 8110.4. Each STC issued by a DAS will have a "-D" placed after the STC number. For example, SA00125AT-D would be the 125th STC issued by the Atlanta ACO on a small airplane and issued by a DAS. The ACO must include DAS-issued STCs in their monthly reports for the STC summary as described in Order 8110.4.

(8) Post Certification Data Submittal. The DAS must submit the data required by 14 CFR § 21.463(b) to the ACO within 30 days after the date of issue of the STC. The procedure manual must identify any data storage arrangements. The ACO must maintain STC project files containing as a minimum:

(a) Copy of all applicable correspondence.

Par 4-2

(b) The program notification.

(c) FAA response to the program notification.

(d) Copy of the STC.

(9) Transfer of STCs. Only the FAA may transfer an STC. A DAS may not transfer an STC by reissuing in another party's name. A DAS holder who wishes to transfer an STC to another party must follow the standard procedures for transfer of a type certificate contained in 14 CFR § 21.4 7 and Order 8110.4.

(10) Amendment of Existing STCs. All STC amendments issued by the DAS require submittal of a program notification. Any amendment to an STC must be coordinated with the ACO prior to its issuance. When amending an STC originally issued by the FAA, the DAS shall include the "-D" designation in the STC number.

d. Airworthiness Certification. Airworthiness certification procedures shall be prescribed in the procedure manual and comply with the requirements of Order 8130.2. The DAS may use the airworthiness certification procedures contained in Order 8130.29, Issuance of a Special Airworthiness Certificate for Show Compliance Flight Testing.

(1) Application for Airworthiness Certificate. An FAA Form 8130-6, Application for Airworthiness Certificate, must be completed for all airworthiness certificates issued or amended by the DAS. The registered owner of the aircraft in question or their designated agent must sign the application. If acting as the owner's agent, the DAS must have a notarized written authorization from the owner. The application must be signed by someone other than the AR inspecting and issuing the airworthiness certificate.

(2) Special Airworthiness Certificates. The DAS may only issue an FAA Form 8130-7, Special Airworthiness Certificate, in the experimental category for the purpose of showing compliance with the airworthiness stan.dards for aircraft it has modified. Before issuing the certificate, the original airworthiness certificate shall be surrendered and the DAS must obtain MIDO approval of the limitations and conditions necessary for safety. The DAS must send the FAA Form 8130-6, Application for Airworthiness Certificate, the original airworthiness certificate, and a copy of the FAA Form 8130-7 to the MIDO for processing in accordance with Order 8130.2.

(3) Amended Standard Certificates. If the airworthiness certification procedures in Order 8130.29 are not used; after showing compliance to the regulations, conformity to the approved type design, satisfactory completion of all required ground inspections. and determining the aircraft is in condition for safe operation.

Par 4-2

the DAS may issue an amended standard airworthiness certificate. (FAA. Form 8100-2) for aircraft which they

~ave previously 1ssued an experimental certificate. Upon

Issu~nce, the FAA Form 8130-6, the existing experimental certificate, and a copy of the new airworthiness certificate must be sent to the MIDO for processing in accordance with Order 8130.2. The MIDO must forward the original airworthiness certification package including the application, supporting documentation, and the certificate to the Aircraft Registration Branch, AFS-750.

. e. 0~ Site Act~vities. A DAS project frequently mvolves a1rcraft modification off site, i.e., any location other than the FAA-approved DAS facility. Off site activities may only be performed by the DAS as authorized by the managing ACO and MIDO. This is limited to projects in which the following conditions are met:

NOTE: A DAS operating off site does not mean its authority or product line has been expanded. As with any delegation, the FAA must properly oversee and manage those DAS functions that are performed off site.

(1) The DAS procedure manual must contain procedures for working DAS projects at a location other then t.he DAS. The DAS must provide quality inspection overs1ght of the work performed at off site facilities for the duration of the project.

(2) Off site activities must take place at an FAA certified repair station with a rating appropriate to the work being performed and within the DAS limitations. The ACO will contact the cognizant FSDO to ensure the repair station has the capability to perform the work outli.ned i~ the pr~gram notification. Work in foreign repair statiOns requues specific ACO approval. The DAS should work with their controlling ACO to obtain the latest

wri~ten guidance prior to any activities. If foreign repair statiOns ~e to be used for multiple STC installations, then a productiOn approval for parts manufacturing is required. Such approvals are not granted outside the U.S.

(3) The FAA does not issue STCs to applicants located outside the U.S. However, prototype installations may be performed at locations outside the U.S. Such installations require the managing ACO to assess the burden that might be created in overseeing the installation. Therefore, for any STC program which is proposed for accomplishment at a foreign repair station, the applicant must provide sufficient details for the ACO to describe how the resources of the FAA would be used to administer its regulatory requirements.

(4) The DAS must have an internal auditing system in place to assure that the procedures approved for the DAS, both on and off site, are in compliance with the

Page 21

applicable regulations. Since the FAA-certified repair station is governed by 14 CFR part 145, the rating and integrity of the repair station are already established. However, the repair station should also pursue FAA parts manufacturer approval when necessary.

(5) A program notification will be written and submitted to the FAA per the procedure manual containing the following additional information:

(a) A statement that this STC project will be accomplished in accordance with the FAA-approved DAS manual.

(b) Identify the location and rating of the facility (repair station, commercial operator, manufacturer) where the actual modification will take place and any specific unique features of the test airplane's registration, etc. Work done at repair stations is limited to repair stations with a rating appropriate to the work being performed and within the DAS limitations.

(c) Identify which DAS ARs will be utilized.

(6) DAS Off site Inspection Procedures are conducted in accordance with the approved manual with the following revisions:

(a) The DAS must notify their managing office prior to performing any DAS function in a foreign country.

(b) If work is proposed to be performed in a foreign country, the ACO managing office will ensure proper policy and guidelines are followed. Should the Civil Aviation Authority (CAA) of a foreign country with which a Bilateral Agreement exists restrict the use of DAS personnel, then the managing ACO will coordinate the necessary support through the CAA.

(7) If airworthiness certification activity will occur outside the managing MIDO's geographical area, the DAS must notify the managing MIDO by submitting to them an FAA Form 8130-13, Designee Geographic Expansion Authorization. The MIDO will authorize the request by endorsing the FAA Form 8130-13, and provide a copy to the AR and the geographical FAA office where the activity will occur. The MIDO will provide any additional instruction to the ARs involved.

f. DAS Projects Involving Foreign-Registered Aircraft or Import Products. A DAS should notify their managing ACO as soon as possible when considering such projects in order to minimize delays.

(1) Foreign-Registered Aircraft. The FAA may authorize a DAS to develop or amend an STC by using aircraft registered in another country. When the

Page 22

United States is not the state of registry for an aircraft involved in an alteration, the ACO must notify the Civil Aviation Authority (CAA) of the state of registry of the proposed alteration and invite their participation in the certification project. The ACO must obtain written authorization from the CAA stating that it has no objections to the alteration or the use of a DAS to make compliance findings on the project. It is possible that a foreign registered aircraft might not be in its FAAapproved type design configuration. If a foreign registered aircraft is being used as a test article to substantiate the alteration, the DAS must ensure that the aircraft conforms to an FAA approved type design for those areas affected by the STCs. Therefore, the DAS is responsible for reviewing the aircraft for the presence of other alterations and ensuring its overall condition for safe operation. Based on the DAS determination, the ACO may concur that the configuration of the aircraft is acceptable for evaluation of the proposed modification. A DAS will not be able to issue an experimental airworthiness certificate for flight testing on a foreign-registered aircraft as this can only be done by the country of registry. The foreign CAA must be asked if they will issue a "special" airworthiness certificate for flight testing in the altered condition.

NOTE: Order 8130.2, Chapter 7, and 14 CFR part 91, § 91.715 provides guidance for the FAA (not designees) to issue special flight authorizations (SFAs) for foreign-registered aircraft that do not have a valid standard airworthiness certificate and that will be operated in US airspace. The requirement for a SFA applies if the aircraft has either a "special" airworthiness certificate from the CAA of the country of registry or has no valid airworthiness certificate. Only standard airworthiness certificates issued by International Civil Aviation Organization member states meet International Civil Aviation Organization Annex 8 requirements.

(2) Import Products. Proposed STCs to import products may require consultation with the foreign CAA. The ACO should determine if the proposed STC requires consultation with the foreign CAA and coordinate the project with the DAS. See appropriate section(s) of 14 CFR part 21 and AC 21-23, Airworthiness Certification of Civil Aircraft, Engines, Propellers, and Related Products Imported into the United States, for more information concerning import products.

4-3. DAS PROCEDURE MANUAL REQUIREMENTS. In addition to the requirements of appendix 2, the DAS procedure manual must address the following elements in the Procedures section of the DAS procedure manual:

a. Project Initiation. The procedures the DAS will follow to initiate a DAS STC program.

Par 4-2

b. FAA Notification. The procedures the DAS will follow for the submittal of the PNL. The PNL must contain certification and conformity plans as described in appendix 3 and 4.

c. Development and Content of the Data Package. The data package should include (as applicable): Certification plan, conformity plan, Top/Master Drawing List and other drawings, specifications, technical reports, electrical load analysis, stress analysis, test plans and reports, type inspection authorization, type inspection report, equipment qualification plans and reports, instructions for Continued Airworthiness, and Flight Manual Supplements. The DAS ARs will review the data package and upon finding that the data is sufficient to show compliance with the applicable airworthiness requirements will approve the data. The procedures should denote what portions of the data package the DAS must submit to the FAA ACO along with the STC, AFMS, and Airworthiness Limitations Sections (if applicable).

d. Production & InstaJJation. The installation and part production (or test) conformity procedures should address how the conformity will be requested, tracked, documented, and performed; how deviations will be addressed and resolved; how to coordinate the conformity with the FAA (if necessary); and the need for a post-test conformity. Concerning procedures for a type inspection authorization (TIA), the DAS should prepare the TIA and any revisions to the TIA should be utilized if the initial issue is incomplete. The TIA should identify conformity requirements, authorized flight tests. special limitations deemed appropriate for test articles and a formal assessment of the risks associated with the flight tests.

NOTE: The DAS holder may only produce parts for the prototype installation. Further production would require the DAS holder to obtain an FAA parts manufacturer approval.

e. Special Airworthiness Certificates. The procedures must denote that only DAS AR personnel identified in the manual may issue Special Airworthiness Certificates in the experimental category for show compliance flight tests. Before issuing the experimental certificate, the DAS will obtain from the FAA any limitations and conditions the FAA considers necessary for safety. The DAS should recommend limitations and conditions, if necessary, in the program notification to the FAA.

L NOTE: Issuance of Special Airworthiness Certificates in the experimental category for Research and Development (R&D), must be issued by a DAR or the MIDO for any company flight tests.

f. Aircraft Ground Evaluation. The DAS procedures for conducting aircraft ground evaluations

Par 4-3

including compliance inspections can state that this be performed as authorized in the TIA.

g. Aircraft Pre-Flight Inspection. The DAS procedures for conducting aircraft pre-flight inspections can state that this be performed as authorized in the TIA.

h. Risk Assessment. The DAS procedures for meeting the requirements of Order 4040.26, Aircraft Certification Service Flight Safety Program.

i. Aircraft Flight Evaluation. The DAS procedures for conducting aircraft flight evaluations can state that this be performed as authorized in the TIA. The DAS must alert the FAA flight test personnel of the flight timeframes as soon as possible when the FAA has requested to also participate in the evaluations.

j. Aircraft Flight Manual Supplement (AFMS) Approval. The procedure must state that the appropriate DAS AR personnel must prepare and sign the AFMS. The FAA ACO will function as the primary contact for AFMS.

k. Issuance of Supplemental Type Certificate (STC). The procedure must state that the appropriate DAS personnel prepare and sign the STC. Define a process by which the DAS will determine that all documentation, inspections, and tests have been completed prior to issuing the STC. This must address any Airworthiness Limitations section and the ICAs. The procedure should also state that a PMA cannot be issued on an STC which carries a "one-time only" limitation. The applicant would have to reapply for a new STC for a multiple approval before a PMA could be considered.

I. Issuance of the Amended Standard Airworthiness Certificate. The procedures must denote that only DAS AR personnel identified in the manual may issue an amended standard airworthiness certificate and how this will comply with Subpart H of 14 CFR part 21 and 14 CFR § 21.473.

Page 23 (and 24)

817/02 8100.9

CHAPTER 5. DELEGATION OPTION AUTHORIZATION

CHAPTER 5. DELEGATION OPTION AUTHORIZATION

5-1. GENERAL. This chapter provides information and guidance concerning the authority and procedures of those organizations holding a Delegation Option Authorization (DOA).

a. Eligibility. Each DOA holder is required by 14 CFR § 21.239 to be the holder of a current type and production certificate for a product certificated under the same part as the products for which a DOA is sought. These certificates must have been issued using the standard procedures in 14 CFR part 21. The DOA must employ a staff of engineering, flight test, production, and inspection personnel who can determine compliance with the requirements of 14 CFR chapter one and meet the requirements of 14 CFR part 21, subpart J.

b. DOA Authority. The DOA allows the holder to use FAA-approved procedures for the purposes of type, production, and airworthiness certification; approve major alterations; and approve data for major repairs. DOA procedures may be used for only the types of products described in 14 CFR § 21.231(a)(l-6). DOA authority may also be used to execute FAA Form 337, Major Repair and Alteration, in accordance with 14 CFR § 21.289.

NOTE: The reference in 14CFR § 21.231(a)(6) to paragraph (a)(4) was inadvertently not updated by Amendment 21-59, which added 14 CFR § 21.231 (a)(2). The correct reference is (a)(5).

(1) Type Certification. DOA procedures allow the holder to make findings of compliance and conformity for new certification projects, amendments to an existing type certificates, and type design changes.

(2) Production Certification. The DOA holder may make findings leading to the amendment of existing production certificates to include additional models or types for which they hold or obtain a type certificate on the production limitation record (PLR).

(3) Airworthiness Certification. The DOA holder may issue airworthiness certificates and approvals in accordance with 14 CFR § 21.251.

(4) Major Repairs, Rebuilding and Alterations. The DOA may execute the FAA Form 337 and make required log book entries in accordance with 14 CFR § 21.289. (See paragraph 5-2f.)

(5) Limitations. The FAA may impose any limitations that may be necessary, taking into account the DOA staffing and facilities. Approval of test plans is one area where the OMT may decide to retain authority, requiring them to be submitted for approval by the ACO.

Par 5-1

The OMT should carefully evaluate the DOA's capability and experience prior to delegating the approval of test plans to the DOA holder. Additionally, the FAA will not delegate those functions which are inherently governmental (see paragraph 3-6). These include, but may not be limited to: issuance of an exemption, determining equivalent level of safety, establishing the certification basis or special conditions, and establishing a means of compliance not previously accepted by the FAA. The DOA holder must obtain concurrence from the ACO on the application of all equivalent safety provisions applied under 14 CFR part 21 subpart B. In addition, the DOA may not approve data involving the exhaust emissions change requirements of 14 CFR part 34 or the acoustical change requirements of 14 CFR part 36. The Noise Control Act of 1972 is not delegated to DOA organizations. The FAA retains the authority to find compliance with those requirements.

(6) Finding Compliance with Foreign Regulations. The ACO may authorize a DOA to make compliance findings to specific foreign regulations delegated to the FAA by a foreign CAA. This can be doPe in accordance with Implementation Procedures for Airworthiness under a Bilateral Aviation Safety Agreement or some other written FAA-approved arrangement with that country (after consultation with AIR-4, AIR-100, and AIR-200). The DOA will provide the original FAA Forms 8100-9 to the project ACO. The substantiating data must be provided to the project ACO if the "Recommend Approval" block is checked. The substantiating data must be made available to the project ACO if the "Approval" block is checked. The project ACO will transmit FAA approval to the foreign CAA.

c. DOA Responsibilities.

(1) Service Difficulties. The DOA must investigate and recommend corrective actions in accordance with 14 CFR § 21.277 those matters identified by the FAA. Additionally, the DOA facility should take an active participation in the review of service difficulties submitted to the company and notify the FAA of any findings that require corrective action.

(2) Records.

(a) Data Files. The DOA holder must maintain the records required by 14 CFR § 21.293. These records must be made available to the FAA at any time and provided to the FAA as soon as the manufacturer no longer operates under the DOA.

(b) Airworthiness Certification Files. The DOA holder must maintain copies of all airworthiness

Page 25

certification packages processed using the DOA in accordance with Order 8130.2.

5-2. DOA AUTHORIZED FUNCTIONS. The DOA holder must follow the procedures prescribed in the procedure manual throughout all certification efforts performed using the DOA. The processes and data generated must comply with the requirements of 14 CPR part 21 and the applicable environmental and airworthiness standards, and should comply with the guidance in all applicable FAA directives. If project requirements necessitate deviation from the procedure manual, the DOA holder must obtain approval from the FAA prior to implementation. AEG responsibilities, during the type certification project, are not delegated to the DOA and must be coordinated with the appropriate AEG by the ACO. Order 8430.21, Flight Standards Division, Aircraft Certification Division, and Aircraft Evaluation Group Responsibilities, describes AEG involvement during type and airworthiness certification projects.

a. Type Certification Programs. The certification process used by the DOA holder is essentially equivalent to that used by the FAA for standard certification programs. Figure 5-1, DOA Type Certification Process, illustrates the general order of certification events.

Page 26

Par 5-1

Par 5-2

DOA

FIGURE 5-1. DOA Type Certification Process

(Page 1 of 2)

DOA TYPE CERTIFICATION PROCESS

DOA TYPE CERTIFICATION PROCESS

~ AND FAA Hold Familiarization Meeting, or Notifies FAA of Planned

Certification Activities

~

FAA Establishes Project Number [If Applicable]

.... At::G Assigns chairman lor Flight ~ Standardization Board, Flight ACO Assigns Project Operations Evaluation Board, and Manager Maintenance Review Board

[If Applicable]

~, FAA and DOA Hold Preliminary TC Board Meeting [For Major Programs] -

DOA Chairs Unless Retained by FAA [May be informal for less significant programs)

~

DOA Develops Certification Plan and Proposes Cert. Basis

+ FAA Establishes Certification Basis [G-1 Issue Paper] and

Provides Policy and Guidance as Appropriate

~ FAA Identifies Need for

Special Conditions [FAA Prepares Issue Papers]

FAA Notifies DOA of Areas Where FAA Will Make Specific Findings

[Areas of FAA Direct Involvement]

+ DOA Designs, Evaluates, Tests, and etc.

~

FAA and DOA Hold Interim TC Board Meeting(s)[For Major Programs]

DOA Chairs Unless Retained by FAA

+ DOA Performs Conformity Inspections [Continues throughput the TC Process]

+ DOA Makes Engineering Compliance Determinations

[Compliance with certification basis]

~ FAA ACO Structures, Systems, and Propulsion Disciplines Make Specific

Findings in the Identified Areas

~ I

Continued on next page • I

I

Page 27

Page 28

FIGURE 5-l. DOA Type Certification Process

(Page 2 of 2)

DOA Issues Experimental Airworthiness Certificate [If Appropriate]

• FAA and DOA Hold Preflight TC Board Meeting [For Major Programs) DOA Chairs

Unless Retained by FAA [May be informal for less significant programs]

__y_

DOA Issues TIA - Includes Certification Basis, Conformity Requirements,

Required Flight Tests [Test plan] and Risk Assessment. TIA is Revised, as Needed, to Authorize Additional Certification Tests. [TIA contains all elements same as FAA for standard certification programs]

y_ DOA Performs Conformity Inspections and Certification Ground and Flight Tests

Authorized by TIA • FAA ACO Flight Test Makes Specific Findings in the Identified Areas • DOA Submits Draft Flight Manual, Proposed TC Data Sheet [new and revised

entries, as appropriate), and Airworthiness Limitations

_y FAA and DOA Conduct Function and Reliability Testing [if applicable)

• DOA Prepares a Statement of Compliance for Submittal to FAA and Submits

Type Inspection Report Parts I and II • FAA and DOA Hold Final TC Board Meeting [For Major Programs] DOA Chairs

Unless Retained by FAA- Statement of Compliance Submitted

[May be informal for less significant programs]

• • DOA Approves AFM with Concurrence FAA Approves from FAA ACO and AEG Airworthiness Limitations

FAA Issues or Amends Type Certicate [If applicable) FAA Provides a Letter to DOA Closing All Specific Findings

+ j_

AEG Issues Results of Operational ~ DOA Submits to FAA Acceptability, Concurs with Content of ICA, & y---y Instructions For Continued

Determines Type Rating Requirements Airworthiness [ICA] I Aircraft Issued Initial I Standard Airworthiness

ACO Transmits TC Data II Post TC Activities: DOA Tracks Sheet to AIR-140 and Evaluates Service Difficulties

Par 5-2

(1) Program Notification. The DOA must notify and make application to the ACO for each new aircraft, aircraft engine, propeller, or amended type certificate. The DOA procedure manual must prescribe the criteria to determine when notification to the FAA is required for major type design changes. The DOA must submit a proposed certification plan and conformity plan, in accordance with Appendices 3 and 4, to the ACO along with the application for type certificate and proposed certification basis. The compliance checklist in the certification plan must identify the AR responsible for finding compliance with each of the applicable regulations. For minor changes to existing products, the DOA may conduct certification activities within the limits of their authority without notification to the FAA.

Continue reading ↓ 120 of 323 passages shown