Radar Vectors
FAA Order Cancelled Issued May 4, 2007 AIR-100 281 pages Copy saved Nov 18, 2026

Order 8100.8C Designee Management Handbook

This document is cancelled. Cancelled by 8100.8D. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (1 of 281 pages). Check the original, as some words may be misread.

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-220 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AEU-100/200

Initiated By: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 6

National Policy

ORDER 8100.8C

1/5/2010

SUBJ: Designee Management Handbook

1. Purpose. This change encompasses policy revisions necessary to implement the recent regulatory changes to Title 14, Code of Federal Regulations (14 CFR) part 1, Definitions and Abbreviations; part 21, Certification Procedures for Products, Articles, and Parts; and part 45, Identification and Registration Marking, which were published October 16, 2009. All references to Organizational Designated Airworthiness Representative (ODAR) and Authorized Representative (AR) have been removed; the Organization Designation Authorization (ODA) program in 14 CFR part 183, subpart D, replaces ODAR as of November 14, 2009.

2. Who This Change Affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices; to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; and to the Aircraft Certification and to Airworthiness Branches at the FAA Academy.

3. Explanation of Changes. This change—

a. Adds the terms “article” and “product” to paragraph 10, Definitions.

b. Removes the term Class I, II, and III products and substitutes, where applicable, the terms “article” and “product.”

c. Removes the term “Approved Production Inspection System (APIS)” from the order, where applicable.

d. Removes the term “Organizational Designated Airworthiness Representative” from the order, where applicable.

e. Removes the term “Authorized Representative” from the order, where applicable.

4. Effective Date: The effective date of this order is April 14, 2010.

5. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

8100.8C CHG 6 1/5/2010

ii

PAGE CHANGE CONTROL CHART

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated iii 5/04/2007 iii 1/5/2010 iv 7/18/2008 iv 1/5/2010 v 10/01/2008 v 1/5/2010 vi 7/24/2009 vi 1/5/2010 3 thru 7 5/04/2007 3 thru 7 1/5/2010 8 thru 9 7/18/2008 8 thru 9 1/5/2010 10 thru 14 5/04/2007 10 thru 14 1/5/2010 21 5/04/2007 21 5/04/2007 22 thru 24 5/04/2007 22 thru 24 1/5/2010 29 5/04/2007 29 5/04/2007 30 5/04/2007 30 1/5/2010 33 7/18/2008 33 7/18/2008 34 thru 40 5/04/2007 34 thru 40 1/5/2010 41 thru 42 02/15/2008 41 thru 42 1/5/2010 43 5/04/2007 43 1/5/2010 44 7/18/2008 44 1/5/2010 45 thru 48 9/29/2008 45 thru 48 1/5/2010 49 thru 54 5/04/2007 49 thru 54 1/5/2010 57 7/18/2008 57 7/18/2008 58 7/18/2008 58 1/5/2010 63 7/18/2008 63 7/18/2008 64 7/18/2008 64 1/5/2010 71 5/04/2007 71 5/04/2007 72 thru 76 5/04/2007 72 thru 76 1/5/2010 77 thru 78 10/1/2008 77 thru 78 1/5/2010 79 thru 80 9/29/2008 79 thru 80 1/5/2010 83 thru 84 5/04/2007 83 thru 84 1/5/2010

1/5/2010 8100.8C CHG 6

iii

PAGE CHANGE CONTROL CHART (CONTINUED)

PAGE CHANGE CONTROL CHART (CONTINUED)

Remove Pages Dated Insert Pages Dated 85 9/29/2008 85 1/5/2010 86 9/29/2008 86 9/29/2008 87 7/18/2008 87 1/5/2010 88 7/18/2008 88 7/18/2008 89 7/18/2008 89 1/5/2010 90 7/18/2008 90 7/18/2008 93 5/04/2007 93 5/04/2007 94 thru 98 5/04/2007 94 thru 98 1/5/2010 105 thru 107 5/04/2007 105 thru 107 1/5/2010 108 7/18/2008 108 7/18/2008 109 thru 110 7/18/2008 109 thru 110 1/5/2010 113 thru 114 7/24/2009 113 thru 114 1/5/2010 115 thru 124 5/04/2007 115 thru 124 1/5/2010 125 thru 126 02/15/2008 125 thru 126 1/5/2010 127 thru 128 7/18/2008 127 thru 128 1/5/2010 129 thru 138 5/04/2007 129 thru 134 1/5/2010 APPENDIX 1 7 7/18/2008 APPENDIX 1 7 7/18/2008 APPENDIX 1 8 7/18/2008 APPENDIX 1 8 1/5/2010 APPENDIX 1 27 7/18/2008 APPENDIX 1 27 1/5/2010 APPENDIX 1 28 7/18/2008 APPENDIX 1 28 7/18/2008 APPENDIX 1 29 7/18/2008 APPENDIX 1 29 1/5/2010 APPENDIX 1 30 9/29/2008 APPENDIX 1 30 9/29/2008 APPENDIX 1 31 thru 41 7/18/2008 APPENDIX 1 31 thru 41 1/5/2010 APPENDIX 1 42 7/18/2008 APPENDIX 1 42 7/18/2008 APPENDIX 3 3 5/04/2007 APPENDIX 3 3 1/5/2010 APPENDIX 3 4 5/04/2007 APPENDIX 3 4 5/04/2007 APPENDIX 4 13 5/04/2007 APPENDIX 4 13 5/04/2007 APPENDIX 4 14 thru 15 5/04/2007 APPENDIX 4 14 thru 15 1/5/2010

8100.8C CHG 6

1/5/2010

PAGE CHANGE CONTROL CHART (CONTINUED)

Remove Pages APPENDIX 4 16

APPENDIX 51 thru 2 APPENDIX 57 APPENDIX 58

APPENDIX 5 9

APPENDIX 510 APPENDIX 511 APPENDIX 512

APPENDIX 61 thru 2

Frunh P. Rem Frank P. Paskiewicz Manager

Dated Insert Pages 5/04/2007 APPENDIX 4 16 5/04/2007 APPENDIX 51thru 2 5/04/2007 APPENDIX 5 7 5/04/2007 APPENDIX 5 8 5/04/2007 APPENDIX 5 9 5/04/2007 APPENDIX 5 10 5/04/2007 APPENDIX 5 11 5/04/2007 APPENDIX 512 5/04/2007 APPENDIX 61 thru 2

APPENDIX 61 thru 2

Dated 5/04/2007 1/5/2010 5/04/2007 1/5/2010 5/04/2007 1/5/2010 5/04/2007 1/5/2010 1/5/2010

Production and Airworthiness Division, AIR-200

iv

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-220 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AEU-100/200

Initiated By: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 5

National Policy

Effective Date:

7/24/2009

SUBJ: Designee Management Handbook

1. Purpose. This change establishes procedures and documentation requirements for—

a. Suspending the authorizations of a designee,

ORDER 8100.8C

b. Reinstating the authorizations of a designee after suspension, and

c. Special delegation for repairs and/or alterations for vintage airplanes and engines.

2. Who this change affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices; to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; and to the Aircraft Certification and to Airworthiness Branches at the FAA Academy.

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

PAGE CHANGE CONTROL CHART

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated v 10/1/2008 v 10/1/2008 vi thru vii 7/18/2008 vi thru vii 7/24/2009 viii 5/04/2007 viii thru ix (and x) 7/24/2009 113 (and 114) 5/04/2007 113 thru 114 7/24/2009 APPENDIX 5 15 thru 22 7/24/2009 APPENDIX 9 1 thru 2 7/24/2009

//S// Frank P. Paskiewicz Manager Production and Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-220 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AEU-100/200

Initiated By: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 4

National Policy

Effective Date:

09/29/2008

SUBJ: Designee Management Handbook 1. Purpose. This change—

a. Incorporates changes necessary to comply with Federal Aviation Administration (FAA) Order VS 1100.2, Managing AVS Delegation Programs; and

ORDER 8100.8C

b. Updates documentation requirements for FAA Form 8130-14, Designee Management Report.

c. Adds implementation instructions for compliance with designee recurrent training attendance requirements and designee file management. 2. Who this change affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices (ACO); to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; and to the Aircraft Certification and Airworthiness Branches at the FAA Academy.

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

8100.8C CHG 4 09/29/2008

ii

PAGE CHANGE CONTROL CHART

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated 45 7/18/2008 45 09/29/2008 46 5/04/2007 46 09/29/2008 47 thru 48 7/18/2008 47 thru 48 09/29/2008 79 thru 80 10/1/2008 79 thru 80 09/29/2008 85 thru 86 7/18/2008 85 thru 86 09/29/2008 111 (and 112) 7/18/2008 111 (and 112) 09/29/2008 APPENDIX 1 5 5/04/2007 APPENDIX 1 5 09/29/2008 APPENDIX 1 6 7/18/2008 APPENDIX 1 6 7/18/2008 APPENDIX 1 29 7/18/2008 APPENDIX 1 29 7/18/2008 APPENDIX 1 30 7/18/2008 APPENDIX 1 30 09/29/2008

/s/ Frank P. Paskiewicz Manager Production and Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-220 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AEU-100/200

Initiated By: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 3

National Policy

Effective Date:

10/1/2008

SUBJ: Designee Management Handbook 1. Purpose. This change—

a. Incorporates new time requirements for designee recurrent training, and b. Provides new guidance on recurrent training class for manufacturing designees. 2. Who this change affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices (ACO); to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; to the Aircraft Certification and Airworthiness Branches at the FAA Academy; and to the Brussels Aircraft Certification Division.

ORDER 8100.8C

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated v 02/15/2008 v 10/1/2008 vi 7/18/2008 vi 7/18/2008 77 thru 82 5/04/2007 77 thru 82 10/1/2008

PAGE CHANGE CONTROL CHART

/s/ Frank P. Paskiewicz Manager Production and Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-220 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AEU-100/200

Initiated By: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 2

National Policy

Effective Date:

7/18/2008

SUBJ: Designee Management Handbook 1. Purpose. This change—

a. Incorporates the addition of manufacturing designee function code 53, b. Clarifies procedures and timelines applicable to appeals and terminations, and c. Supersedes AIR-200 Deviation Memorandum dated January 2007 concerning annual witnessing of designees at Group III, Category 3, and Group IV facilities. 2. Who this change affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices (ACO); to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; to the Aircraft Certification and Airworthiness Branches at the FAA Academy; and to the Brussels Aircraft Certification Division.

ORDER 8100.8C

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

8100.8C CHG 2 7/18/2008

ii

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated iii 02/15/2008 iii 5/04/2007 iv 02/15/2008 iv 7/18/2008 v 02/15/2008 v 02/15/2008 vi thru vii 02/15/2008 vi thru vii 7/18/2008 viii 02/15/2008 viii 5/04/2007 7 5/04/2007 7 5/04/2007 8 thru 9 5/04/2007 8 thru 9 7/18/2008 10 5/04/2007 10 5/04/2007 15 thru 16 5/04/2007 15 thru 16 7/18/2008 33 5/04/2007 33 7/18/2008 34 5/04/2007 34 5/04/2007 43 5/04/2007 43 5/04/2007 44 thru 45 5/04/2007 44 thru 45 7/18/2008 46 5/04/2007 46 5/04/2007 47 thru 48 5/04/2007 47 thru 48 7/18/2008 55 5/04/2007 55 5/04/2007 56 5/04/2007 56 7/18/2008 59 thru 66 5/04/2007 59 thru 66 7/18/2008 85 thru 90 5/04/2007 85 thru 90 7/18/2008 107 5/04/2007 107 5/04/2007 108 thru 112 5/04/2007 108 thru 112 7/18/2008 127 thru 128 5/04/2007 127 thru 128 7/18/2008

PAGE CHANGE CONTROL CHART

7/18/2008 8100.8C CHG 2

iii

Remove Pages Dated Insert Pages Dated APPENDIX 1 6 thru 42 5/04/2007 APPENDIX 1 6 thru 33 7/18/2008 APPENDIX 1 43 thru 44 02/15/2008 APPENDIX 1 34 thru 35 7/18/2008 APPENDIX 1 45 thru 46 5/04/2007 APPENDIX 1 36 and 37 7/18/2008 APPENDIX 1 47 thru 48 02/15/2008 APPENDIX 1 38 and 39 7/18/2008 APPENDIX 1 49 thru 62 5/04/2007 APPENDIX 1 40 thru 46 7/18/2008 APPENDIX 3 1 5/04/2007 APPENDIX 3 1 7/18/2008 APPENDIX 3 2 5/04/2007 APPENDIX 3 2 5/04/2007 APPENDIX 4 1 5/04/2007 APPENDIX 4 1 5/04/2007 APPENDIX 4 2 5/04/2007 APPENDIX 4 2 7/18/2008

/s/ Frank P. Paskiewicz Manager Production and Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (MAX); A-FAC-0 (LTD); AMA-200 (10 copies); AMA-250 (10 copies); AFS-600 (3 copies); AVR-20 (LTD); AEU-00/200

Initiated by: AIR-200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8100.8C

CHG 1

National Policy

Effective Date: Feb 15, 2008

SUBJ: Designee Management Handbook

1. Purpose. This change incorporates the modification of designee Function Codes 19, 20 and 32 to reflect the January 14, 2008 change to 14 CFR Part 21.325(b)(4) concerning designee activity outside the United States. This change adds authority to issue export airworthiness approvals for class III products at non-PAH distributors operating under an exemption to 14 CFR Part 21.323(b).

ORDER 8100.8C

a. Table 4-2, page 41 was changed to add issuance of recurrent export airworthiness approvals to the description.

b. Paragraph 1407 (a)(10), page 125, Function Code 32, was changed to remove the limitation to “located in the United States” and a note was added to allow export airworthiness approvals at non-PAH distributor facilities operating under an exemption to CFR 14 Part 21.

c. Appendix 1, Figure 5, page 43, Function Code 19, was changed to remove the limitation to “located in the United States”.

d. Appendix 1, Figure 5, page 43, Function Code 20, was changed to remove the limitation to “located in the United States” and a note was added to allow export airworthiness approvals at non-PAH distributor facilities operating under an exemption to CFR 14 Part 21.

e. Appendix 1, Figure 5, Table 6, page 47 was changed to add recurrent to the table title section.

f. This change supersedes AIR-200 Deviation Memorandum dated 25 Jan, 2008 on the same subject.

2. Who This Change Affects. This order is distributed to the Washington Headquarters division levels of the Aircraft Certification Service and Flight Standards Service; to the branch levels of the Aircraft Certification Service; to the branch levels in the regional Flight Standards Divisions and Aircraft Certification Directorates; to all Flight Standards District Offices and International Field Offices; to all Aircraft Certification Offices (ACO); to all Certificate Management Offices and all Manufacturing Inspection District and Satellite Offices; to the Aircraft Certification and Airworthiness Branches at the FAA Academy; to the Flight Standards International Field Offices; and to the Brussels Aircraft Certification Division.

8100.8C CHG 1 02/15/2008

ii

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

CHANGE CONTROL CHART

CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated

iii-viii 5/04/2008 iii-viii 2/15/2008

41/42 5/04/2007 41/42 2/15/2008

125/126 5/04/2007 125/126 2/15/2008

Appendix 1, Pages 43/44 5/04/2007 Appendix 1, Pages 43/44 2/15/2008

Appendix 1, Pages 47/48 5/04/2007 Appendix 1, Pages 47/48 2/15/2008

Appendix 1, Pages 47/48 5/04/2007 Appendix 1, Pages 47/48 2/15/2008

/s/ Frank P. Paskiewicz Manager, Production and

Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN)-3; A-W(CD/FS)-3; A-FFS-5,7 (MAX); A-FAC- 3,4(STD), AMA-220 (10 Copies), AMA-250 (5 Copies); AFS-600 (3 Copies); AVR-20 (ALL); AEU-100/200

Initiated by: AIR-100/200

FOREWORD

This order is a comprehensive publication establishing policy and procedures for the selection, appointment, orientation, training, oversight, renewal, tracking, and termination of certain representatives of the Administrator, under the cognizance of the Aircraft Certification Service and Flight Standards Service. The information contained in this order is the result of an ongoing effort to improve the processes involving representatives of the Administrator and to update the procedures as appropriate.

John J. Hickey Director, Aircraft Certification

Service, AIR-1

National Policy Effective Date:

May 4, 2007

SUBJ: Designee Management Handbook

ORDER

8100.8C

1/5/2010 8100.8C CHG 6

iii

TABLE OF CONTENTS

TABLE OF CONTENTS

CHAPTER 1. INTRODUCTION

Paragraph Page

1. Purpose … 1 2. Distribution … 1 3. Cancellation … 1 4. Background … 1 5. Explanation of Changes … 2 6. General … 2 7. Changes to This Order … 4 8. Deviations … 4 9. Records Management … 4 10. Definitions … 5 11. Acronyms … 12 12. Forms, Letters, and Formats … 13 13. Information Currency … 13

CHAPTER 2. AIR ROLES AND RESPONSIBILITIES

CHAPTER 2. AIR ROLES AND RESPONSIBILITIES

200. General … 15 201. Training … 15 202. Designee Process Coordinator … 15 203. Advisor … 16 204. Appointing Office Manager … 17 205. Evaluation Panel … 18 206. Appeal Panel … 18 207. Evaluator … 19 208. Managing Office Manager … 19

CHAPTER 3. AIR DESIGNEE AUTHORITY AND RESPONSIBILITIES

CHAPTER 3. AIR DESIGNEE AUTHORITY AND RESPONSIBILITIES

300. General … 21 301. Manufacturing Designee Authority … 22 302. Reserved … 23 303. Engineering Designee - Dual Appointments … 23 304. Cross-Utilization of DARs … 23 305. Manufacturing Designees - International Operating Procedures … 24 306. Engineering Designee - DER Authority … 25 307. Engineering Designee Appointments - Company/Consultant Categories … 25 308. Engineering Designations … 25 309. Engineering Special Authorized Areas - Designations … 27 310. Engineering Designees - Special Authorizations … 28

8100.8C CHG 6 1/5/2010

iv

Paragraph Page

311. Engineering Designees - Delegated Functions/Authorized Areas … 29 312. Engineering Designees - Limited Appointments … 29 313. Engineering Designees - Limitations on DER Functions … 30 314. Engineering Designees - International Operating Procedures … 30

CHAPTER 4. AIR APPLICATION PROCESS

CHAPTER 4. AIR APPLICATION PROCESS

400. General … 33 401. Application Package … 33 Table 4-1. Regulatory Appointment Criteria … 34 Table 4-2. Technical Appointment Criteria … 34 Table 4-3. Interface Appointment Criteria … 46 Table 4-4. Standardization Appointment Criteria … 47 402. FAA Employee Applications … 47 403. Multiple Appointments … 48 404. Supplier DMIR Applications … 48 405. Reserved … 49 406. Reserved … 49 407. Reserved … 52 408. Appointment of DMIRs Outside the United States … 50 409. Appointment of DARs Outside the United States … 50 410. Appointment of DERs Outside the United States … 51

CHAPTER 5. AIR DESIGNEE APPOINTMENT PROCESS

CHAPTER 5. AIR DESIGNEE APPOINTMENT PROCESS

500. General … 55 501. Initial Application Processing … 55 502. Advisor’s Evaluation of the Application … 55 503. Purpose and Makeup of the Evaluation Panel … 57 504. Evaluation Panel Review of the Application … 58 505. Administrative Requirements … 58 506. DER Candidate Identification … 59 507. DAR Candidate Identification … 60 508. DER Candidate Procedures … 60 509. DAR Candidate Development Profile … 61 510. Requests for Multiple Appointments, Expanded Authority, Transfer, and Reinstatement … 63

CHAPTER 6. AIR APPEAL PROCESS

CHAPTER 6. AIR APPEAL PROCESS

600. General … 67 601. Appeal Panel … 67 602. Scope of Appeal Panel Authority … 67 603. Functioning of Appeal Panel … 67

1/5/2010 8100.8C CHG 6

v

CHAPTER 7. AIR DESIGNEE ORIENTATION

Paragraph Page

700. General … 69 701. General Designee Orientation … 69 702. DER Orientation … 70 703. DMIR Orientation … 72 704. DAR Orientation … 73 705. Reserved … 74

CHAPTER 8. DESIGNEE TRAINING

CHAPTER 8. DESIGNEE TRAINING

800. General … 77 801. Types of Designee Training Seminars … 77 802. Initial Seminar … 77 803. Recurrent Seminar … 79 804. Additional Provisions … 80 805. Seminar Attendance Records … 80 806. Seminar Registration … 81

CHAPTER 9. AIR DESIGNEE OVERSIGHT

CHAPTER 9. AIR DESIGNEE OVERSIGHT

900. General … 83 901. Responsibilities … 83 902. Manufacturing DMIR/DAR Oversight (Supervision, Monitoring, and Tracking) … 83 903. Manufacturing DAR Candidate Oversight … 86 904. DMIR/DAR Geographic Restrictions … 87 905. DER Oversight … 87 906. Minimum Levels of DER Oversight … 92 907. FAA Form 8110-3 Submittal … 93 908. DER Candidate Oversight … 93 909. Reserved … 94 910. Designee Information Network … 94

CHAPTER 10. AIR DESIGNEE RENEWAL

CHAPTER 10. AIR DESIGNEE RENEWAL

1000. AIR Designee Renewal … 95 1001. Duration of Appointments … 96 1002. DMIR and Manufacturing DAR Renewal Guidelines … 96 1003. Executive-Level DMIRs/DARs … 98 1004. Executive-Level DMIR/DAR Evaluation Considerations … 99 1005. DER Renewal Procedures … 100 1006. Executive-Level DER Evaluation Considerations … 102

8100.8C CHG 6 1/5/2010

vi

CHAPTER 11. TERMINATION OF DESIGNATIONS

CHAPTER 11. TERMINATION OF DESIGNATIONS

Paragraph Page

1100. General … 105 1101. Cause for Termination of Designations … 106 1102. Voluntary Termination Procedures for Designees … 107 1103. Termination Procedures of a DMIR, DER, or DAR … 107 1104. Coordination of Termination Decisions … 109 1105. Designee Information Network Status … 109

CHAPTER 12. DESIGNEE FILES

CHAPTER 12. DESIGNEE FILES

1200. Designee Applicant Files … 111

CHAPTER 13. SUSPENSION AND REINSTATEMENT OF DESIGNATIONS … 113

1300. General … 113 1301. Suspension … 113 1302. Suspension Process and Documentation … 113 1303. Suspension Requirements … 113 1304. Reinstatement from Suspension … 114

CHAPTER 14. AFS DAR PROCEDURES

CHAPTER 14. AFS DAR PROCEDURES

1400. General … 115 1401. General Qualifications … 115 1402. Specialized Experience Required for Data Management Functions … 116 1403. Specialized Experience Required for Maintenance Functions … 117 1404. National Examiner Board (NEB) Process … 119 1405. Designee Authority and Responsibilities … 121 1406. Application Procedures … 122 1407. Authorized Functions and Codes … 122 1408. FAA Employee Applications … 125 1409. Reserved … 125 1410. Applicant Notification … 125 1411. Administrative Requirements … 126 1412. General Designee Orientation … 126 1413. DAR Orientation … 127 1414. Reserved … 128 1415. Maintenance of Files … 128 1416. Appeal Process … 128 1417. Designee Training … 128 1418. Designee Oversight … 129 1419. DAR Geographical Restrictions … 131

7/24/2009 8100.8C CHG 5

vii

Page

1420. Designee Information Network/Program Tracking and Reporting System … 136 1421. Compliance and Enforcement … 136 1422. Designee Renewal … 136 1423. Termination of Designations … 138

APPENDIX 1. APPLICATION PACKAGE

APPENDIX 1. APPLICATION PACKAGE

Figure 1. Sample FAA Form 8110-14, Statement of Qualifications (Reduced Size) … 1 Figure 2. Sample DER Application Package Submittal Letter … 2 Figure 3. DER Application Evaluation … 3 Figure 4. Sample DMIR/DAR Application Package Submittal Letter … 27 Figure 5. DMIR/DAR/ODAR Application Evaluation … 28 Figure 6. Sample of ODAR’s Procedures Manual Submitted by the ODAR Applicant … 42

APPENDIX 2. APPOINTMENT/EVALUATION DOCUMENTS

APPENDIX 2. APPOINTMENT/EVALUATION DOCUMENTS

Figure 1. Designee Appointment Tracking Document … 1

APPENDIX 3. ORIENTATION

Figure 1. Sample Designee Acknowledgment of Responsibilities … 1 Figure 2. Sample DAR Candidate Development Profile … 3

APPENDIX 4. FAA RESPONSES FOR APPOINTMENT

APPENDIX 4. FAA RESPONSES FOR APPOINTMENT

Figure 1. Sample Acknowledgment of Letter Requesting Designee Information … 1 Figure 2. Sample Acknowledgment of Receipt of Application … 2 Figure 3. Sample Notification Application Forwarded to Evaluation Panel … 3 Figure 4. Sample Notification Application Not Forwarded to Evaluation Panel … 4 Figure 5. Sample Notification of Denial Letter … 5 Figure 6. Sample Notification of Identification as a DER Candidate - Company … 6 Figure 7. Sample Notification of Appointment as a DER … 8 Figure 8. Sample Notification of Identification as a DER Candidate - Consultant … 10 Figure 9. Sample Notification of Identification as a DAR Candidate … 12 Figure 10. Sample Notification of Appointment as a DMIR/DAR … 14

8100.8C CHG 5 7/24/2009

viii

Page

Figure 11. Sample FAA Form 8000-5, Certificate of Designation (Reduced Size) … 16 Figure 12. Sample FAA Form 8000-5, Certificate of Designation (Wallet-Sized Reproduction for Identification Purposes) … 17

APPENDIX 5. AIR DOCUMENTS

APPENDIX 5. AIR DOCUMENTS

Figure 1. Sample Certificate of Authority Renewal Letter for DMIR/DAR/ODAR - Manufacturing … 1 Figure 2. Sample FAA Form 8130-13, Designee Geographic Expansion Authorization (Reduced Size) … 3 Figure 3. Sample FAA Form 8130-14, Designee Management Report (Reduced Size) … 5 Figure 4. Sample Summary Activity Report (To Be Used by Manufacturing DMIRs, DARs, and ODARs) (Reduced Size) … 8 Figure 5. Sample Letter Authorizing Data Approval for Repairs and Alterations … 10 Figure 6. Sample FAA Form 8110-29, DER/FAA Interaction Tracking Form … 11 Figure 7. Sample FAA Form 8110-30, DER Performance Evaluation Form … 13 Figure 8. Sample Notification to a DMIR or Company DER of Suspension … 15 Figure 9. Sample Notification to a Supplier DMIR of Suspension … 16 Figure 10. Sample Notification to a DAR or Consultant DER of Suspension … 17 Figure 11. Sample Notification to an ODAR AR of Suspension … 18 Figure 12. Sample Notification to a DMIR or Company DER of Reinstatement from a Suspension … 19 Figure 13. Sample Notification to a Supplier DMIR of Reinstatement from a Suspension … 20 Figure 14. Sample Notification to a DAR or Consultant DER of Reinstatement from a Suspension … 21 Figure 15. Sample Notification to an ODAR AR of Reinstatement from a Suspension … 22

APPENDIX 6. FAA DOCUMENTATION FOR TERMINATION

APPENDIX 6. FAA DOCUMENTATION FOR TERMINATION

Figure 1. Sample Notice of Termination of a DAR/Consultant DER … 1 Figure 2. Sample Notice to a Production Approval Holder on Termination of a DMIR … 2 Figure 3. Sample Notice of Termination of a Company DER … 3

7/24/2009 8100.8C CHG 5

ix (and x)

APPENDIX 7. AFS DOCUMENTS

APPENDIX 7. AFS DOCUMENTS

Figure 1. Sample FAA Form 8110-28, Application and Statement of Qualification (DME/DPRE/DAR-T/ODAR-T) … 1 Figure 2. Sample Certificate of Authority Letter for DAR - Maintenance (DAR-T) … 10 Figure 3. Sample Certificate of Authority Letter for ODAR - Maintenance (ODAR-T) … 12 Figure 4. Sample Certificate of Authority Supplement, Delegated Functions and Limitations (DAR-T and ODAR-T) … 14 Figure 5. FAA Geographic Boundaries - Flight Standards Service … 15

APPENDIX 8. PROCESS FLOWCHARTS

APPENDIX 8. PROCESS FLOWCHARTS

Figure 1. Flowchart - Designee Selection and Appointment Process … 1 Figure 2. Graphic - Designee Oversight Process … 2 Figure 3. Flowchart - Designee Renewal Process … 3 Figure 4. Flowchart - Termination Process, Reserved … 4

APPENDIX 9. ENGINEERING DESIGNEES—SPECIAL DELEGATION FOR REPAIRS AND/OR ALTERATIONS FOR VINTAGE AIRPLANES AND ENGINES

1. Special Delegation Authority … 1 2. Vintage Airplanes and Engines … 1 3. Evaluation Panel … 1 4. Technical Appointment Criteria for Special Delegation … 2

5/04/2007 8100.8C

CHAPTER 1. INTRODUCTION

CHAPTER 1. INTRODUCTION

1. PURPOSE. This order establishes the Federal Aviation Administration (FAA) procedures to be used by the Aircraft Certification Service (AIR) and Flight Standards Service (AFS) for managing the FAA’s representatives of the Administrator (designee) program. In addition, this order provides geographic restriction procedures and authorized designee functions. These procedures are designed to ensure they are applied in an unbiased manner to all qualified private persons. Specific designee procedures covered in this order include the following areas:

a. FAA roles and responsibilities.

b. Initial selection and appointment.

c. Orientation, including designee authority and responsibilities.

d. Training.

e. Oversight.

f. Renewal.

g. Termination and appeals.

2. DISTRIBUTION. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards Office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district and satellite offices; to all flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the FAA Academy; to the Brussels Aircraft Certification Staff and Flight Standards Staff; to applicable representatives of the Administrator; and to all international field offices.

3. CANCELLATION. This order cancels FAA Order 8100.8B, Designee Management Handbook, dated July 14, 2003, and its associated changes.

4. BACKGROUND. A national Designee Standardization Team (DST) was chartered to establish a single, standardized, national management handbook for manufacturing, engineering, and maintenance designees. As a result, the DST evaluated new and existing criteria for training, oversight, renewal, and termination procedures for incorporation into this order. On the basis of a national evaluation conducted in 1998, the DST determined that it was not necessary to make significant changes to the existing processes. The primary goals of designee management are safe aircraft, continuous improvement, and process standardization. Title 49, United States Code § 44702(d) (formerly the Federal Aviation Act of 1958, Title III, § 314(a)), authorizes the Administrator to delegate to private persons any function relating to examinations, inspections, and testing of aircraft, subject to any regulations, supervision, and review that the Administrator may prescribe. Under this section, the Administrator may also rescind any such delegation, at any time, for any reason considered appropriate; however, § 44702(d) does not provide a

8100.8C 5/04/2007

comprehensive procedure for appeal of such action by the designee. Therefore, the Office of the Chief Counsel has developed procedures for termination actions. These procedures can be found in chapter 11, Termination of Designations, of this order.

5. EXPLANATION OF CHANGES. This revision of the order—

a. Incorporates Order 8100.8B, changes 1 through 3.

b. Updates the Acknowledgment of Responsibilities form.

c. Clarifies limits of multiple appointments as designees and with respect to their involvements with engineering and inspection of the same product.

d. Identifies specialized experience requirements for the issuance of special flight permits (function codes 04 and 16).

e. Revises paragraphs 406 and 510 for clarity and to make policy easier to understand.

f. Revises chapter 8 to clarify designee training requirements.

g. Revises termination requirements and clarifications.

h. Updates and/or clarifies AFS policy regarding on-the-job training in chapter 14, AFS DAR and ODAR Procedures.

i. Includes suggestions and improvements from previous reviews.

j. Incorporates changes necessary to comply with Order VS 1100.2, Managing AVS Delegation Programs.

6. GENERAL.

a. Section 44702(d) empowers the Administrator to “...delegate a qualified private person, or to an employee under the supervision of that person, a matter related to the examination, testing, and inspection necessary to issue a certificate, and issuing the certificate.” Title 14, Code of Federal Regulations (14 CFR) part 183, Representatives of the Administrator, prescribes the requirements for designating private persons to act as representatives of the Administrator for the purpose of issuing airmen and aircraft certificates. Part 183, subpart B, Certification of Representatives, empowers the FAA to select designees from qualified persons who apply by letter accompanied by a statement of qualifications. The delegations are limited in scope in that all requirements, policy, direction, and interpretations must reside with the Administrator.

b. Section 183.29, Designated Engineering Representatives, defines the types of designated engineering representative (DER) appointments in the following technical disciplines:

(1) Structural engineering.

(2) Powerplant engineering.

1/5/2010 8100.8C CHG 6

(3) Systems and equipment engineering.

(4) Radio engineering.

(5) Engine engineering.

(6) Propeller engineering.

(7) Flight analyst.

(8) Flight test pilot.

(9) Acoustical engineering.

c. Section 183.31, Designated Manufacturing Inspection Representatives, defines the privileges of a designated manufacturing inspection representative (DMIR) appointment.

d. Section 183.33, Designated Airworthiness Representative, defines the privileges of a designated airworthiness representative (DAR) appointment.

e. Section 183.15, Duration of Certificates, defines the duration of the above appointments and identifies that the appointments are subject to periodic renewal.

f. Section 183.15(b) identifies the causes for termination of a designation made under part 183.

g. It is essential that designees be familiar with, and have ready access to, all appropriate FAA publications and documents.

h. A designation is a privilege, not a right, and not every qualified applicant will be granted a designation. The FAA is SOLELY responsible for determining if there is sufficient need to justify the appointment of a designee, and that there are adequate FAA resources available to manage the designee. If either of these conditions cannot be met, or for any other reason that the Administrator prescribes, the designee appointment WILL NOT be made. Subsequent to appointment, a designation may be terminated in accordance with § 183.15(b) and chapter 11 of this order.

i. The FAA is responsible for determining when the services of a designee may be used.

(1) Consistent with general principles of management, the oversight portion of this order addresses setting performance expectations, monitoring performance, and taking any appropriate corrective action. Manufacturing aviation safety inspector (ASI) certification functions will be delegated to the fullest extent practical, but not to the extent an advisor’s technical skills are jeopardized.

(2) Designees must perform only those functions for which they have been authorized, including any unique function(s) specifically authorized on a case-by-case basis. All certification functions identified in this order will be performed on behalf of the FAA and not on

8100.8C CHG 6 1/5/2010

behalf of the aviation industry. In addition, a designee is not considered an employee of the U.S. Government and is not federally protected for the work performed or the decisions made as a designee. The limits of Federal protection for FAA employees are defined by Title 28, United States Code § 2679.

j. Section 44702(d) states that when delegation to a qualified private person is made, or to an employee under the supervision of that person, the designee is subject to regulations, supervision, and review. Designee oversight constitutes the supervision and review of designees and is the process by which the FAA compares designee performance to stated expectations.

k. Designee renewal is made subject to the FAA’s determination of the continued need, ability to manage, and continuous satisfactory designee performance, which in turn justifies the continuation of the appointment and designee renewal. The designee renewal process provides the FAA the opportunity to identify and correct any designee performance deficiencies. When a performance deficiency is communicated to the designee, renewals are contingent on the FAA and the designee reaching an agreement that will result in satisfactory work performance by the designee for future activities.

l. The FAA will terminate a designee when it determines that the appointment is not warranted under chapter 11 of this order. Designees are cautioned that because the appointment is a privilege and not a right, the FAA is authorized to terminate a designation in accordance with § 183.15(b).

m. The applicant does not have any appeal rights when there is no FAA need or resources to manage the designation. The managing office(s) should write a courtesy letter notifying the applicant that the FAA is not accepting applications for the requested delegation and that the applicant may reapply at a future date. Current designees may appeal in accordance with the guidelines in chapter 6, AIR Appeal Process, and chapter 11 of this order.

7. CHANGES TO THIS ORDER. The authority to revise or cancel material in this order resides with AIR, coordinated by the Production and Airworthiness Certification Division (AIR-200) in conjunction with the Aircraft Engineering Division (AIR-100) and AFS.

8. DEVIATIONS. Adherence to procedures in this order is necessary for uniform administration of this directive material. Any deviations from this guidance material must be coordinated and approved by AIR-100 for engineering designee issues and by AIR-200 for manufacturing and maintenance designee issues, in coordination with the Aircraft Maintenance Division (AFS-300). If a deviation becomes necessary, the FAA employee involved should ensure the deviation is substantiated, documented, and concurred with by the appropriate supervisor. A copy of the deviation must be submitted to AIR-100/AIR-200 for review and concurrence.

9. RECORDS MANAGEMENT. Refer to FAA Order 0000.1, Subject Classification System, FAA Order 1350.14, Records Management, and FAA Order 1350.15, Records Organization, Transfer, and Destruction Standards, or your office Records Management Officer (RMO)/Directive Management Officer (DMO) for guidance regarding retention or disposition of records.

1/5/2010 8100.8C CHG 6

10. DEFINITIONS.

a. Advisor. An aviation safety engineer (ASE), a flight test pilot (FTP), or a manufacturing or maintenance ASI with a similar discipline as the applicant, who is assigned as the primary individual with the responsibilities of performing the initial evaluation and continuous oversight after appointment.

b. Appeal Panel. The appeal panel consists of at least three persons equivalent to the advisor level or above who were not involved in the original denial or termination decision.

c. Appointing Office. The aircraft certification office (ACO), manufacturing inspection office (MIO), manufacturing inspection district office (MIDO), certificate management office (CMO), or regional office (RO) having selection, appointment, and management orientation responsibilities for the following designees:

(1) Designated Engineering Representative (DER). The appointment is signed by the manager of the appropriate ACO or the manager’s designee within the ACO. The ACO is delegated responsibility as the appointing office for processing the initial appointment applications, performing continuous oversight, and issuing renewals.

(2) Designated Manufacturing Inspection Representative (DMIR) and Designated Airworthiness Representative (DAR) - Manufacturing. The appointment is signed by the manager of the appropriate MIDO. The MIDO manager is delegated responsibility as the appointing official for processing the initial appointment applications and/or issuing renewals. For administrative efficiency, the MIDO manager may further delegate to manufacturing inspection satellite office (MISO) personnel the renewal of a DMIR or DAR.

NOTE: DMIR/DAR appointment authority may be retained at the MIO level.

(3) DAR - Maintenance. The appointing office is the flight standards RO in the geographic region where the designee is located or has a primary place of business, and where the authorized functions will be performed. The RO also retains renewal responsibility.

d. Article. A material, part, component, process, or appliance.

e. Authorized Area. For DERs, an authorized area applies to the specific portion or system of the aircraft, or the type of engine or propeller, or specialized area to which a delegated function applies.

f. Certificate of Authority (COA). An FAA letter and/or supplement specifying the kinds of designation for which the person concerned is qualified. The COA also indicates the expiration date and is updated upon issuance of any subsequent renewals. This COA is not the same type of certificate as described in 14 CFR part 13, Investigative and Enforcement Procedures, § 13.19. The FAA may revoke the designee COA at any time, for any reason the Administrator considers appropriate.

8100.8C CHG 6 1/5/2010

g. Certificate of Designation (COD). A certificate that specifies the kind of designation for which the designee is qualified; it is used for display purposes.

h. Compliance Inspection. A physical inspection performed by the ACO engineer or the DER when authorized. This inspection provides an opportunity to review an installation and its relationship to other installations on a product to determine compliance with 14 CFR/Civil Air Regulation (CAR) requirements, which cannot be adequately determined from an evaluation of the technical data.

i. Conformity Inspection of Prototype Products and Related Articles. An inspection to determine the applicant’s compliance to 14 CFR part 21, Certification Procedures for Products and Articles, § 21.33(b) and any other inspections necessary to determine that the prototype products and related articles conform to the proposed design drawings and specifications.

j. Conformity Inspection of Production Products and Related Articles. An inspection that may be necessary to determine that completed production products and related articles conform to the approved type design and are in a condition for safe operation.

k. Delegated Function. For DERs, a delegated function applies to the technical areas involved in determining compliance with applicable airworthiness regulations.

l. Designated Airworthiness Representative (DAR) - Maintenance. An individual appointed in accordance with § 183.33 who holds a mechanic’s certificate with an airframe and powerplant (A&P) rating under 14 CFR part 65, Certification: Airmen Other Than Flight Crewmembers, or a person who holds a repairman certificate and is employed at a repair station certificated under 14 CFR part 145, Repair Stations, and who meets the qualification requirements of this order.

m. Designated Airworthiness Representative (DAR) - Manufacturing. An individual appointed in accordance with § 183.33 who possesses aeronautical knowledge and experience, and meets the qualification requirements of this order.

n. Designated Engineering Representative (DER). An individual appointed in accordance with § 183.29 who holds an engineering degree or equivalent, possesses technical knowledge and experience, and meets the qualification requirements of this order.

(1) Company. An individual appointed to act as a company DER for the employer to approve or recommend approval of technical data to the FAA.

(2) Consultant. An individual appointed to act as an independent (self-employed) consultant DER to approve or recommend approval of technical data to the FAA.

op. Designee File. A file maintained at the branch or office level that contains all information to support the delegation.

p. Designee Information Network (DIN). An automated information system designed to support the designee management process by providing a consolidated designee information repository for tracking designee personnel data.

1/5/2010 8100.8C CHG 6

q. Designated Manufacturing Inspection Representative (DMIR). An individual appointed in accordance with § 183.31 who possesses aeronautical knowledge and experience, is employed by a production approval holder (PAH) or a PAH’s approved supplier, and meets the qualification requirements of this order.

r. Designee Process Coordinator (DPC). The FAA individual who initiates the formal selection, orientation, and appointment review process, and coordinates all subsequent FAA actions including documenting oversight, renewal, and termination procedures.

NOTE: For manufacturing, the aviation assistant or equivalent may perform administrative functions as a DPC, but not the technical tasks of designee management.

s. Dual Appointment. An individual may be appointed, for example, as a DAR or a company DER as well as a DAR or consultant DER, in situations where the DAR or DER is performing functions for more than one applicant.

t. Evaluating Office. The office that has the technical expertise necessary to make a determination of the technical qualifications of an applicant. The evaluating office becomes the managing office upon appointment.

u. Evaluation Panel (EP). Two or more technical specialists assigned to evaluate an applicant’s qualifications to the appointment criteria to determine denial, candidacy, or appointment and delegated authority, as appropriate.

v. Evaluator. The engineer or pilot who has a technical specialty other than that of the advisor. The evaluator is responsible during appointment and renewal for completing the evaluation form for that specialty and coordinating with the advisor.

w. Executive Level. A person who holds the company position of president, vice president, chief engineer, chief inspector, owner, part owner, director of engineering or quality assurance, etc.

x. Guidance Material. The direction provided by a guide; these are FAA policy and advisory material.

y. Interaction Tracking Form. A required annual submittal (FAA Form 8110-29, DER/FAA Interaction Tracking Form) from a DER to the FAA describing work conducted by the designee in support of FAA responsibilities for certification and/or continued airworthiness.

z. Managing Office. The FAA office assigned the responsibility by the appointing office for supervising, monitoring, training, tracking, and recommending renewal of a designee.

aa. Manufacturer. See Production Approval Holder (PAH). For the purpose of this order, “manufacturer” and “PAH” are used interchangeably. A manufacturer is a PAH.

bb. Mentor. A designee who works with a candidate on behalf of the advisor to ensure that the candidate is progressing to become qualified as a designee.

8100.8C CHG 6 1/5/2010

cc. Monitoring. That portion of oversight responsibilities of assigned designees that includes the reviewing of type, production, and airworthiness certification documentation and reports for accuracy, and observing that satisfactory procedures, inspection techniques, and methods are used.

dd. Multiple Appointment. An individual may be appointed as more than one type of designee. For example, DAR and DMIR; or DAR, DMIR, and DER, as long as all appointment criteria are met. The regulatory authority for the individual’s appointments will be in more than one of the following sections: §§ 183.29, 183.31, and 183.33.

ee. Multiple Disciplines. An individual may be appointed as one type of designee with different technical disciplines (for DERs) or authorized functions (for manufacturing or maintenance designees). The regulatory authority for the individual’s appointments will be in accordance with one of the following sections: § 183.29, § 183.31, or § 183.33.

ff. Oversight. See Supervision. For the purpose of this order, “oversight” and “supervision” are used interchangeably.

gg. Performance Evaluation Form. An annual report (FAA Form 8110-30, DER Performance Evaluation Form) submitted by an FAA employee evaluating a DER’s performance in support of FAA activities. The report documents annual oversight and review of the DER’s assistance to the FAA. In addition, the report provides an indication of FAA monitoring and counseling for correction of DER deviant action noted during the evaluation period. Finally, the report also provides a documented recommendation for renewal of the designation in accordance with § 183.15(b).

hh. Person. An individual, firm, partnership, corporation, company, association, joint-stock association, or government entity. It includes a trustee, receiver, assignee, or similar representative of any of them.

ii. Product. An aircraft, aircraft engine, or propeller.

jj. Production Approval Holder (PAH). The holder of a PC, a parts manufacturer approval (PMA), or a technical standard order authorization, issued under the provisions of part 21, who controls the design and quality of the product/article.

kk. Production Certificate Holder’s Distribution Center. An associate facility as defined in FAA Order 8120.2, Production Approval and Certificate Management Procedures.

ll. Program Tracking and Reporting System (PTRS). An automated information tracking system that includes the tracking of all designee activities by AFS.

mm. Recurrent Seminars. The FAA conducts two types of recurrent seminars:

(1) A DER recurrent seminar provides an update on general policy and specific technical topics applicable to DER disciplines.

1/5/2010 8100.8C CHG 6

(2) A DMIR/DAR recurrent seminar provides instruction concerning designee authority and responsibility, and current rules, regulations, and policy.

nn. Renewal. The act of authorizing a designee to continue performing delegated functions.

oo. Special Authorization Letter. For DERs, a special authorization letter states that the DER is permitted to make certain data approvals normally reserved for the FAA. The special authorization letter identifies these approvals, the project, and the duration for which the special authorization is valid. A special authorization letter is valid only at the ACO that issued the letter and only for the project for which it is generated.

pp. Standardization Seminars. The FAA conducts two types of standardization seminars:

(1) A DER standardization seminar provides a familiarization of FAA administrative procedures, DER roles and responsibilities, and an overview of the type certification process.

(2) A DMIR/DAR standardization seminar provides a familiarization of FAA administrative procedures, methods, and practices used by persons involved in the civil certification process.

qq. Status Definitions of Designees. An indicated status of a designee’s delegation within the DIN.

(1) Active. The appointed designee currently exercises the delegated authority.

(2) Applicant. The person who submitted an application is being evaluated prior to making a decision to deny or appoint them as a candidate or active designee.

(3) Candidate. The designee applicant is serving a period of training to prepare for appointment as an active designee.

(4) Denied. It is determined the applicant fails to meet the minimum qualifications of the delegation(s), and the delegation of designee-requested authority cannot be made.

(5) Idle. The appointed designee currently is not in a position to exercise the delegated authority, but in the interest of the FAA, the managing office agrees not to terminate the delegated authority.

NOTE: A designee in an idle status should be reviewed annually to determine whether the designee should remain in an idle status or terminated.

(6) Suspended. Delegated authority has been immediately removed for cause.

(7) Terminated. Delegated authority has been removed for one or more of the following reasons:

(a) Deceased.

8100.8C CHG 6 1/5/2010

(b) Retired. In a typical case, a designee had worked for an established company and ceased to function as a designee upon retirement from the company.

(c) By Request. At the request of a designee or designee’s employer or by the supplier to a PAH.

(d) Change of Employment. The designee leaves the employment of the company that requested the delegation.

(e) Misconduct. The designee has not properly exercised or performed the duties of the delegation.

(f) Insufficient Activity. The designee has not had sufficient activity to warrant continuance of the delegation.

(g) Lapse in Qualifications. The designee’s qualifications for a specific activity have lapsed.

(h) Certificate Suspension, Cancellation, or Revocation. The certificate that is required by a designee or the designee’s employer is suspended, canceled, or revoked.

(i) Lack of Care, Judgment, or Integrity. The designee has not demonstrated the care, judgment, or integrity required to exercise the delegation properly.

(j) Lack of FAA Need and Ability To Manage. The managing office no longer needs the services of the designee, or no longer has the resources to manage the designee.

(k) Nonsubmittal of the Interaction Tracking Form (DER Only). The DER failed to submit the Interaction Tracking Form by the expiration date of appointment.

(l) Any Other Reason. For any other reason deemed necessary by the Administrator.

(8) Transferred. The designee has transferred from one appointment office jurisdiction to another.

(9) Withdrawn. The person has voluntarily withdrawn an application.

rr. Selection, Appointment, and Renewal (SAR) System. The SAR system automates and tracks the selection, appointment, and renewal workflow. This automation capability is accomplished through the DIN and the Internet. Internal data will be available in a centralized location for authorized FAA personnel to access regardless of their physical office location, provided network connectivity exists.

Note: For the purpose of this revision, only the automation of renewal will be addressed. Selection and appointment DIN automation are future capabilities.

1/5/2010 8100.8C CHG 6

ss. Supervision. That portion of oversight responsibilities for assigned designees that includes the following:

(1) Documenting and maintaining current and accurate records.

(2) Informing designees of their duties and responsibilities.

(3) Authorizing activities outside the managing office’s geographic area.

(4) Providing guidance and direction in the implementation of all assigned duties.

(5) Providing designee training.

(6) Notifying designees of their performance.

(7) Initiating corrective action, as required.

tt. Tracking. The portion of oversight responsibilities for assigned designees that includes documenting the designee’s activities.

11. ACRONYMS. The following is a list of acronyms used in this order:

14 CFR Title 14, Code of Federal Regulations A&P airframe and powerplant AC advisory circular ACO aircraft certification office AD airworthiness directive AFS Flight Standards Service AIR Aircraft Certification Service ASE aviation safety engineer ASI aviation safety inspector BAA Bilateral Airworthiness Agreement BASA Bilateral Aviation Safety Agreement CAA Civil Aviation Authority CAR Civil Air Regulation CHDO certificate holding district office CMO certificate management office COA Certificate of Authority COD Certificate of Designation DAR designated airworthiness representative DER designated engineering representative

8100.8C CHG 6 1/5/2010

DIN Designee Information Network DME designated mechanic examiner DMIR designated manufacturing inspection representative DPC designee process coordinator DPRE designated parachute rigger examiner DST Designee Standardization Team EASA European Aviation Safety Agency EP evaluation panel FAA Federal Aviation Administration FSDO flight standards district office FTP flight test pilot HIRF high-intensity radiated field ID identification IFO international field office IPA Implementation Procedures for Airworthiness JAA Joint Aviation Authorities JAR Joint Aviation Requirements MIDO manufacturing inspection district office MIO manufacturing inspection office MISO manufacturing inspection satellite office NEB National Examiner Board OJT on-the-job training PAH production approval holder PC production certificate PMA parts manufacturer approval PTRS Program Tracking and Reporting System RO regional office SAR selection, appointment, and renewal STC supplemental type certificate TC type certificate U.S. United States VLA very light aircraft

12. FORMS, LETTERS, AND FORMATS. Examples of appropriate forms, letters, and formats referenced in this order are provided in the appendixes.

1/5/2010 8100.8C CHG 6

13 (and 14)

13. INFORMATION CURRENCY. Any deficiencies found, clarifications needed, or improvements suggested regarding the content of this order should be documented on an FAA Form 1320-19, Directive Feedback Information (located in the back of the order) and forwarded to the Planning and Financial Resources Management Branch, AIR-530, Attention: Directive Management Officer, for consideration. A copy may be forwarded to the Production and Airworthiness Certification Division (AIR-200), Delegation and Airworthiness Programs Branch (AIR-140), and Aircraft Maintenance Division (AFS-300), Attention: Comments to Order 8100.8. If an interpretation is urgently needed, you may contact AIR-100 or AIR-200, or for Flight Standards concerns, AFS-300. Always use Form 1320-19 to follow up each verbal conversation.

7/18/2008 8100.8C CHG 2

CHAPTER 2. AIR ROLES AND RESPONSIBILITIES

CHAPTER 2. AIR ROLES AND RESPONSIBILITIES

200. GENERAL. This chapter describes roles and responsibilities of the DPC, advisor, appointing office manager, EP, appeal panel, evaluator, and managing office manager in the selection, appointment, oversight, and tracking processes.

201. TRAINING.

a. Initial Training. FAA employees managing designees will complete designee management training as specified by their service headquarters. AIR employees will accomplish training as specified in Order 8000.93. ASIs, ASEs, and FTPs who have more than 1 year of experience working for the FAA but have not completed the required training may manage designees when assigned a mentor who has successfully completed training. The mentor and/or one of the managing office’s qualified ASIs, ASEs, or FTPs will provide guidance and be available to answer any designee management-related questions.

b. Recurrent Training. ASIs will attend the same recurrent seminars that their assigned designees attend every 3 years. ASEs and FTPs will attend the same recurrent seminars that their assigned designees attend every 4 years. A detailed description of the designee recurrent seminars is provided in chapter 8.

202. DESIGNEE PROCESS COORDINATOR. The DPC is responsible for initiating the formal selection and appointment process, and coordinating all subsequent FAA actions for the applicant. Specifically, the DPC will perform the following:

a. Prepare the applicant/designee file.

b. Prepare, coordinate, and send all letters to the applicant.

NOTE: For manufacturing, if the DPC is the aviation assistant or equivalent, they should not author any technical letters; however, they may perform the administrative functions.

c. Enter the information into the DIN at the beginning and completion of the process.

d. Ensure the applicant has provided all the information required under paragraph 401 of this order.

e. Send the application package and file to the advisor for review.

f. Review the file after completion by the advisor to determine if the applicant is being recommended to an EP.

8100.8C CHG 2 7/18/2008

g. Schedule meetings, notify all parties involved, and provide copies of all necessary documentation. The DPC also may chair and/or facilitate EP meeting(s) and ensure all appropriate documents are in the designee file.

NOTE: For manufacturing, if the DPC is the aviation assistant or equivalent, they will not chair EP meetings. The appointing office manager or an ASI member to the EP will chair the meeting.

h. Prepare and coordinate appointment letters/certificates and send them to the applicant, or give the letters/certificates to the advisor for presentation or mailing to the applicant, as appropriate.

i. Provide a letter to the applicant and request that any appointment decision appeals be received within 60 days.

j. Prepare and distribute the designee renewal package to those participating in the renewal process. Refer to chapter 10, AIR Designee Renewal, of this order.

k. Inform the managing office manager within 2 weeks of receipt of any termination decision appeals from the applicant.

203. ADVISOR. For the purpose of designee appointment, the advisor conducts a preliminary review of the application package and either denies or makes a recommendation to the EP. For the management of the designee, the advisor oversees the designee’s activity and is responsible for addressing, in a timely manner, questions from a designee concerning certification procedures or policies. For the purpose of renewal, the advisor is responsible for conducting a review of the designee. The advisor will accomplish the following:

a. Review the application package and designee file for completeness.

b. Maintain the designee file and ensure timely updates.

c. Review the application package for general qualifications and scope/specialty.

d. Consult the appropriate manager to determine the FAA’s need and ability to manage the applicant, if the applicant were to be appointed.

e. Document the justification for the appointment or denial.

f. Conduct a preliminary technical review of the application package and seek technical input from other FAA sources, as necessary.

g. Contact the applicant’s references, if required.

h. Contact the applicant at any point during the evaluation process for additional information and/or documentation.

i. Reduce the scope of the functions sought, or deny applications, when appropriate.

5/04/2007 8100.8C

j. Recommend to the EP appointment or candidacy including any limitations.

k. Conduct initial orientation of the newly appointed designee or candidate.

l. Ensure that the designee signs the Designee Acknowledgment of Responsibilities.

m. Respond to questions from the designee concerning FAA-accepted methods of compliance and procedures for certification activity.

n. Permit the designee to exercise the appointment authority by performing authorized functions in certification activity.

o. Review technical compliance data from the designee or participate with the designee in certification activities, as appropriate.

p. Provide feedback to the designee concerning performance.

q. Identify and justify a minimum level of oversight for assigned designees.

r. Verify the designee’s completion of required training.

s. Participate in a scheduled review of designee performance leading to designee renewal.

t. Participate, as needed, in activities supporting FAA decisions for termination of a designee appointment.

u. Review data for entry into the DIN for completeness and accuracy.

204. APPOINTING OFFICE MANAGER. The appointing office manager’s responsibilities in the designee management process are to accomplish the following:

a. Determine that the FAA has the ability to manage the designee.

b. Determine the FAA’s need for the requested designation.

c. Determine the assignment of an advisor.

d. Select EP members.

e. Sign (or delegate signature authority) for all designee correspondence.

f. Sign or coordinate on all designee appointments or candidacies after the EP decision has been reached.

g. Serve as an appeal panel member.

h. Participate with the advisor in establishing a minimum level of oversight for assigned designees.

8100.8C 5/04/2007

i. For purposes of designee management, ensure that a minimum level of oversight is conducted for each designee.

j. For purposes of designee renewal, ensure that according to the duration of their appointments, all assigned designees are reviewed and renewed, as appropriate.

205. EVALUATION PANEL. The purpose of the EP is to compare qualifications to the appointment criteria and to determine denial, candidacy, appointment, and delegated authority, as appropriate. The EP must consist of at least two individuals who are in the same discipline as the applicant and who are familiar with the selection and appointment process. The applicant’s assigned advisor may be a member of the EP. The EP will accomplish the following:

NOTE: Management participation should be reserved for potential appeals; therefore, managers should not serve as EP members. A manager who serves as a member of an EP may not serve on any appeal panel for the same applicant.

a. Meet person to person, but may participate by teleconference, if necessary.

b. Review the application package submitted by the advisor.

c. Interview the applicant or document the reasons why an interview was not necessary.

d. Reach consensus for each selection or appointment.

e. Document all meetings and sign all EP forms.

f. Give the completed documentation to the DPC for retention in the applicant’s file.

206. APPEAL PANEL. The appeal panel provides an avenue for the applicant to appeal the decision regarding a request for appointment as a designee. The decisions of the appeal panel are FINAL. The appeal panel will consist of at least three persons equivalent to the advisor level or above who were not involved in the original denial or termination decision. The appeal panel will accomplish the following:

a. Determine if the appointment process was conducted properly and either upholds the previous decision, override that decision, or request that any part of the appointment process be repeated.

b. Make decisions by reviewing the documentation in the appellant’s file, the EP’s written justification, and any other information.

c. Invite other persons to be resources at its deliberations, when required.

d. Conduct any interviews, as necessary.

5/04/2007 8100.8C

19 (and 20)

e. Initiate corrective action to prevent recurrence if discrepancies are found during the review of the EP decision.

f. Complete deliberations and reach a decision by consensus within 45 days from the date of the appeal.

g. Document and sign all appeal panel decisions.

207. EVALUATOR. The evaluator assists the advisor by providing technical specialist input during initial review and annual review of designee performance. The evaluator has a technical specialist background different from that of the advisor. The evaluator’s responsibilities are to provide the following:

a. Technical specialist input to the advisor during the application review process.

b. Orientation applicable to the evaluator’s technical specialty to the designee.

c. Technical specialist input to the advisor to support the scheduled renewal process for the assigned designee.

208. MANAGING OFFICE MANAGER. The managing office manager is responsible for supervising, monitoring, training, and tracking assigned designees. The managing offices are the ACOs, CMOs, and MIDOs in their respective geographic areas. The managing office manager’s responsibilities are to ensure the following:

a. FAA employees are responsive to assigned designees when questions concerning FAA policy and procedures arise.

b. An assigned designee’s activities have at least a minimum level of oversight.

c. Designee performance is reviewed and recommendations concerning renewal are made in accordance with this order.

5/04/2007 8100.8C

CHAPTER 3. AIR DESIGNEE AUTHORITY AND RESPONSIBILITIES

CHAPTER 3. AIR DESIGNEE AUTHORITY AND RESPONSIBILITIES

300. GENERAL. AIR designees, within limits and under the supervision of the advisor, may be authorized to perform examinations, inspections, and witness tests in the manufacturing and engineering areas.

a. Designees must be familiar with and have ready access to all appropriate FAA publications and documents. Designees may not perform any functions until the required documents are obtained. Material may be downloaded from the FAA Designee and Delegation Web site at http://www.faa.gov.

b. Designees ARE NOT authorized to perform evaluations, surveillance, or investigation of quality control systems data, procedures, methods, or service difficulty reports, on behalf of the FAA.

c. Designees ARE NOT authorized to approve departures from specific policy and guidance, new/unproven technologies, equivalent level of safety findings, special conditions, or exemptions. These are inherently governmental functions and cannot be delegated to a designee.

d. Designees ARE NOT authorized to issue U.S. airworthiness certificates or special flight permits on non-U.S.-registered aircraft.

e. The FAA inspector or engineer WILL NOT authorize any privileges not covered in part 183. Designees will perform only authorized functions within the limits of designated authority.

f. Designees, while acting pursuant to their appointment, are representatives of the Administrator for specified functions and ARE NOT considered employees of the FAA. Designees are authorized to use their titles (for example, DMIR or DAR) only when performing those functions specifically delegated by the FAA managing office.

g. All applicants must review and sign a Designee Acknowledgment of Responsibilities to confirm their understanding that an appointment as a designee is a privilege and not a right and can be terminated by the FAA at any time. This may be done through SAR when available.

h. Designees are responsible for obtaining and maintaining all guidance material (including FAA forms) necessary to perform their authorized functions. All designees are encouraged to obtain guidance material through the reference library located on the Designee Web site. The reference library is intended to be the primary source of electronic designee guidance material. AFS and AIR maintain this Web site. If designees are unable to obtain guidance material through the Internet, they may contact their managing/appointing offices for assistance. Designees also may request guidance material from the U.S. Department of Transportation, Subsequent Distribution Office, Ardmore East Business Center, 3341 Q 75th Avenue, Landover, MD 20785; telephone number 301-322-4779; fax number 301-386-5394.

8100.8C CHG 6 1/5/2010

301. MANUFACTURING DESIGNEE AUTHORITY.

a. Manufacturing DMIRs are responsible for performing authorized functions in accordance with the pertinent regulations, FAA directives, and any specific instructions conveyed by their managing office(s). A DMIR will—

(1) Be authorized to assume responsibility for performing authorized functions concerning products and/or articles that are produced and controlled by their employer’s production approval,

(2) Not issue U.S. airworthiness certificates or special flight permits for non-U.S.-registered aircraft,

(3) Perform functions only within the limits of their authority, and

(4) Provide information related to their accomplishments in accordance with the schedule established by their managing office.

b. Manufacturing DARs are responsible for performing authorized functions in accordance with the pertinent regulations, FAA directives, and any specific instructions conveyed by their managing office(s). A DAR will—

(1) Perform only authorized functions within the limits of their authority,

(2) Contact their managing office for authorization BEFORE accepting any certification or inspection activity requested by an applicant. Obtain any special directions or instructions deemed necessary by the advisor requesting the inspection activity,

(3) Provide information relating to their accomplishments in accordance with the schedule established by their managing office,

(4) Ensure that FAA forms, certificates, and other official documents are properly safeguarded. Under no circumstance may any certificate be in the possession of an applicant until the DAR has completed and signed the certificate. All airworthiness certificates or approvals and related documents (for example, application for airworthiness certificates, limitations cited and attached to FAA Form 8130-7, Special Airworthiness Certificate, and FAA Form 8100-2, Standard Airworthiness Certificate) will indicate the DAR’s printed or typed name, signature, and designation number,

(5) Not perform any mechanical, maintenance, or inspection function on behalf of an applicant (for example, owner, agent, repair station, or PAH) on products or articles for which an airworthiness certificate or approval is sought. This would not preclude the DARs from performing maintenance, mechanical functions, or inspections in a non-DAR capacity when NOT involved in the airworthiness certification/approval actions under their DAR authority.

1/5/2010 8100.8C CHG 6

(6) Ensure a product meets the FAA-approved type design data, is in a condition for safe operation, and complies with all applicable regulations (for example, marking requirements, registration, and special importing requirements) before issuing an airworthiness certificate. The DARs will seek guidance from their managing office when problems arise that they cannot resolve,

(7) Ensure FAA Form 8100-1, Conformity Inspection Record, is used to record conformity inspections conducted during type or airworthiness certification activities,

(8) Submit applicable original or duplicate documents within 7 days of completion to the managing office for review,

(9) Review applications for completeness and ensure the various airworthiness certificates or approvals have certification statements signed by an applicant or authorized agent. When appropriate, the DAR also must obtain a completed FAA Form 8130-9, Statement of Conformity, from an applicant before performing any inspections, and

(10) Ensure special flight permits issued for overweight operations are in accordance with the latest revisions of all applicable guidance material (for example, FAA Order 8130.2, Airworthiness Certification of Aircraft and Related Products; FAA Order 8300.10, Airworthiness Inspector’s Handbook; and other policy documents). The DAR will contact the managing office to obtain any special directions or instructions BEFORE issuing a special flight permit for overweight operations.

302. RESERVED.

303. ENGINEERING DESIGNEE - DUAL APPOINTMENTS. An individual may be appointed to act as both a company DER and a consultant DER. In such a case, two separate appointments will be made and separate certificates of delegation issued.

a. The ACO will advise the DER that the employer should be informed of the dual appointment. In the case of dual appointments, the consultant DER delegation may be authorized for areas different from the company DER delegation, depending on the applicant’s experience and the limitations the ACO may place on the DER.

b. Each of these appointments should be managed by the same appointing ACO. If the company DER delegation and the consulting DER delegation would be in the geographic area of responsibility of two different ACOs, the two ACOs will determine which office will manage the dual delegation.

304. CROSS-UTILIZATION OF DARs. While manufacturing inspectors/designees primarily are responsible for original airworthiness certification, and flight standards airworthiness inspectors/designees primarily are responsible for recurrent airworthiness certification, original and recurrent airworthiness certifications may be authorized to a manufacturing DAR for specific function codes. When the manufacturing managing office is delegating both original and recurrent functions (under the manufacturing function codes), the managing office should

8100.8C CHG 6 1/5/2010

coordinate with the maintenance managing office on the intent to delegate “recurrent” (manufacturing function codes) functions to eliminate any potential issues that may arise.

a. An individual may be authorized to perform original and recurrent functions when the individual meets both sets of qualification criteria and has the applicable function code(s) authority. Each designee should be carefully evaluated to ensure the correct function codes with appropriate limitations for those functions are delegated.

b. For new applicants requesting original and recurrent functions (under the manufacturing function codes), the appropriate manufacturing managing office must obtain concurrence of recurrent functions under the manufacturing function codes from the appropriate AFS managing office before delegating the applicant as a manufacturing designee.

c. For existing manufacturing designees who already have been delegated both original and recurrent activity, the designee must obtain concurrence from the appropriate maintenance advisor before performing delegated recurrent functions as a manufacturing designee.

d. CMOs/FSDOs/MIDOs must ensure that documentation (for example, e-mails, faxes, and phone logs) of the mutual agreement/concurrence by the two managing offices is maintained in the designee’s file.

305. MANUFACTURING DESIGNEES - INTERNATIONAL OPERATING PROCEDURES.

a. Operating Outside Geographic Boundaries. It is the FAA’s intention that all manufacturing designees perform their authorized functions within the managing office’s geographic boundaries. However, a managing office may authorize a manufacturing designee to perform authorized functions outside its geographic boundaries (including other countries) on a case-by-case basis when the FAA’s ability to adequately monitor and supervise the designee is maintained. The manufacturing DMIR/DAR will submit FAA Form 8130-13, Designee Geographic Expansion Authorization, to the managing office for authorization to work outside the assigned geographic area. For processing Form 8130-13, refer to paragraph 904 of this order.

b. Feedback to Foreign Authorities. On some occasions, manufacturing designees may conduct activities in foreign facilities that hold an approval from their local Civil Aviation Authority (CAA). If problems are encountered during a U.S. project, the designee must provide the details to the managing office. The managing office will determine if any system issues or major problems should be forwarded to the applicable CAA for its consideration. For example, if the outcome of a test fails or articles are nonconforming, it may be evidence of a system breakdown or a compliance problem at that facility.

5/04/2007 8100.8C

306. ENGINEERING DESIGNEE - DER AUTHORITY. The DER may approve engineering technical data within the limits of the authority assigned by means of FAA Form 8110-3, Statement of Compliance with the Federal Aviation Regulations, and, when authorized by the ACO, may witness FAA compliance tests and perform compliance inspections. DERs will follow the procedures of FAA Order 8110.4, Type Certification Process. The specific roles, authorized areas, and responsibilities of the DER will be established by agreement between the ACO and the DER.

NOTE: On a case-by-case basis, with proper coordination with the MIDO and assurance of technical ability, the ACO and MIDO may authorize a DAR to witness a compliance test or conduct a compliance inspection.

307. ENGINEERING DESIGNEE APPOINTMENTS - COMPANY/CONSULTANT CATEGORIES.

a. Company DER. An individual may be appointed to act as a company DER for the individual’s employer and may approve, or recommend approval to the FAA of, only technical data for the company. Company DERs may perform their FAA functions at different administrative levels, as agreed upon between the FAA and the company. In some cases, a DER personally may evaluate and approve technical data. In other cases, a DER may ensure, through the company management system, the proper evaluation of technical data by other persons; then the DER will approve that data by certifying that the data comply with the applicable regulations. If a company DER is assigned to work in a consortium, business arrangement (such as using other companies’ DERs), partnership, licensing agreement, etc., the company should request in writing to expand the existing delegation. If the expansion of the DER company delegation involves the geographic area of responsibility of two different ACOs, the two ACOs will determine which office will manage the expanded delegation.

308. ENGINEERING DESIGNATIONS.

a. Structural DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

(2) Drawings.

(3) Test witnessing and reports (with prior FAA approval).

(4) Material and process specifications used in structural applications.

(5) Other data relating to structural considerations.

b. Powerplant DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

8100.8C 5/04/2007

(2) Drawings.

(3) Test witnessing and reports (with prior FAA approval).

(4) Other data relating to powerplant installations, including all systems and equipment necessary for the proper operation of the powerplant.

c. Systems and equipment DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

(2) Drawings.

(3) Test witnessing and reports (with prior FAA approval).

(4) Other data relating to aircraft systems and equipment design not covered by the structural or powerplant DER.

d. Radio DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

(2) Drawings.

(3) Other data relating to the design and operating characteristics of radio equipment being manufactured and/or modified.

e. Engine DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

(2) Drawings.

(3) Test witnessing and reports (with prior FAA approval).

(4) Other data relating to durability, materials, and processes employed in engine design, operation, and maintenance.

f. Propeller DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Engineering reports.

(2) Drawings.

(3) Test witnessing and reports (with prior FAA approval).

5/04/2007 8100.8C

(4) Other data relating to propeller blade and hub design, pitch control, propeller governing, and maintenance, provided these items comply with the pertinent regulation(s).

g. Flight analyst DERs may approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Aircraft performance flight-test data.

(2) Aircraft quantitative operating data.

(3) Flight characteristic data.

h. FTP DERs may conduct and approve, within the limits of their appointment, flight tests of new or modified aircraft.

i. Acoustical DERs, when delegated on a case-by-case basis, may witness and approve, within the limits of their appointment, the following items that comply with pertinent regulation(s):

(1) Noise certification tests conducted in accordance with an FAA-approved test plan.

(2) Noise data.

(3) Noise analyses.

(4) Test results that were measured and evaluated as prescribed in 14 CFR part 36, Noise Standards: Aircraft Type and Airworthiness Certification, subparts A through J, or by an equivalent procedure previously approved by the FAA Office of Environment and Energy (AEE-1).

309. ENGINEERING SPECIAL AUTHORIZED AREAS - DESIGNATIONS. A DER may be appointed to approve technical data not specifically listed in the charts of appendix 1, figure 3 of this order. Each chart has an authorized area of “special” delegated functions to cover this contingency. The DER’s COA, or related documentation, will list the authorized area of “special” with the delegated function specifically defined. The following are examples of common special delegations:

a. Administrative/Management DERs. A qualified person may be appointed as an administrative coordinator or as a manager of an applicant’s certification program. This person will be assigned the authorized designation of administrative DER or management DER. These special designations encompass all technical disciplines; therefore, they may not be associated with a particular chart in appendix 1 of this order. These designations relieve the FAA from having to perform the normal project administration, technical coordination, and guidance usually associated with a certification program.

(1) Administrative DER. The administrative DER, usually a company DER, acts as a focal point for FAA coordination activity, including organizing technical DER activity,

8100.8C 5/04/2007

correspondence, schedules, meetings, conformity inspections, and FAA participation in official tests.

(2) Management DER. The management DER, usually a consultant DER, performs FAA certification project management duties for the FAA. In this capacity, the DER performs duties similar to the FAA program manager. These duties include organizing the certification program, and directing, overseeing, and managing the tasks of technical assessments and findings of compliance. This DER ensures that all technical data required are reviewed and approved by the appropriate DER for compliance, except in those areas reserved for FAA approval. This DER must first be appointed under one of the delegations listed in § 183.29.

b. Major Repairs and Alterations. Specific authorization is required to examine and approve data for alterations and repairs. The DER should be assigned the authorized area of “special - major repairs and/or alterations,” which will be related to the DER’s basic delegations. A sample letter authorizing data approval for repairs and alterations is shown in appendix 5, figure 5 of this order. The three specific authorizations are as follows:

(1) Special - major repairs.

(2) Special - major alterations.

(3) Special - major repairs and major alterations.

c. PMA Identicality. Specific authorization is required to examine and make findings of identicality for the purpose of obtaining PMA. Test and computation are authorized within the scope of the DER’s delegation according to § 183.29.

310. ENGINEERING DESIGNEES - SPECIAL AUTHORIZATIONS. The level of data approval granted to the DER may vary from project to project depending on the complexity of the project. Therefore, the appointing ACO manager or manager’s representative may issue a special authorization letter to permit a DER to approve data normally reserved for the FAA. The special authorization letter must be specific in its delegation, and limited in its duration, and valid only at the ACO that issued the letter. Verbal authorization from the ACO is permitted in some cases (for example, witnessing tests), provided it is documented on the subsequent Form 8110-3. Refer to FAA Order 8110.37, Designated Engineering Representative (DER) Guidance Handbook, appendix 1, Limitations on DER Functions, for activities that may be permitted by special authorization letter.

311. ENGINEERING DESIGNEES - DELEGATED FUNCTIONS/AUTHORIZED AREAS.

a. Delegated Functions. A delegated function applies to the technical areas involved in determining compliance with applicable airworthiness regulations.

b. Authorized Areas. An authorized area applies to the specific portion or system of an aircraft or the type of engine or propeller or specialized area to which a delegated function is applicable applies.

5/04/2007 8100.8C

c. DER Authorization. The delegated functions and authorized areas for each DER will be established from the appendix 1, figure 3 charts of this order, before the applicant’s original appointment, and again during review at the DER’s authority change or renewal date. These will be listed on the COA, the letter of appointment, or any letter(s) of renewal or authority for expansion or deletion. Any other limitations appropriate to the appointment, such as certain CAR or other regulation(s), are also listed on the form. “Recommend approval” may be used only for those delegated functions authorized on the COA. The scope of the designation, and any limitation considered necessary at the time of appointment, will be clearly indicated on the COA or other related documentation.

d. Predecessor Regulations, Harmonized Regulations, or Other Acceptable Airworthiness Requirements. The delegation of a specific portion of 14 CFR also may include the delegation for predecessor and other applicable regulations. Approval for predecessor regulations typically would be limited to 14 CFR or CAR airworthiness requirements.

(1) Example of Predecessor Regulations. The delegation of 14 CFR part 25, Airworthiness Standards: Transport Category Airplanes, includes CAR part 4b.

(2) Example of Harmonized and Predecessor Regulations. The delegation of 14 CFR part 23, Airworthiness Standards: Normal, Utility, Acrobatic, and Commuter Category Airplanes, includes CAR part 3 or Joint Aviation Requirements (JAR) 23.

(3) Example of Acceptable Airworthiness Requirements. The delegation of JAR-Very Light Aircraft (VLA) and the airworthiness standards accepted for primary category airplanes.

312. ENGINEERING DESIGNEES - LIMITED APPOINTMENTS. A DER may be appointed for, or limited to, specific types of work. For example, a systems and equipment DER could be limited to handling approval of alterations to specific types of systems (for example, hydraulic and pressurization on only one airplane model), or an FTP DER could be limited to conducting flight tests on fixed wing aircraft of a specified maximum gross weight. Caution should be exercised in making delegations so narrowly limited that they become burdensome to the FAA.

313. ENGINEERING DESIGNEES - LIMITATIONS ON DER FUNCTIONS. The FAA retains authority and responsibility for examining and approving certain items. This limits the data that the DER can approve. Order 8110.37, appendix 1, lists those areas that would more than likely be reserved for FAA approval but that could be delegated to a DER.

314. ENGINEERING DESIGNEES - INTERNATIONAL OPERATING PROCEDURES.

a. Finding Compliance to Foreign Regulations.

(1) Approval Basis. The ACO may authorize a DER to make compliance findings to specific foreign regulations delegated to the FAA by a foreign CAA. This can be done in accordance with Implementation Procedures for Airworthiness (IPA) under a Bilateral Aviation Safety Agreement (BASA) or some other written FAA-approved arrangement with that country

8100.8C CHG 6 1/5/2010

(after consultation with the International Airworthiness Programs staff, AIR-40). If the FAA accepts the delegation of a compliance finding from a bilateral or Joint Aviation Authorities (JAA) member country or from the JAA under the BASA IPA, that finding could be made either directly by the FAA or by an appropriately qualified designee. The decision to delegate the compliance finding, as well as the decision to provide this special authorization to a designee, is made by the FAA only, depending on availability of resources. A DER who is granted such approval authority must have demonstrated knowledge of the foreign regulations and their application to the appointing ACO. This typically will be evidenced by participation on previous validation programs with the foreign CAA and the FAA.

NOTE: For paragraph 314a(1) above, the JAA/EASA may be substituted as a foreign CAA.

(2) Form 8110-3 Distribution. The DER will provide the original Form 8110-3 to the project ACO. The DER must also send a copy of the form to the appointing ACO, if different from the project ACO. The substantiating data must be provided to the project ACO if the Recommend Approval block is checked. The substantiating data must be made available to the project ACO if the Approval block is checked. The project ACO will transmit FAA final approval for the compliance finding to the foreign CAA. In that final approval, the FAA confirms that compliance has been demonstrated and findings of compliance have been made.

(3) Completion of Form 8110-3. A DER with this specific authorization is permitted to approve data only to the additional technical requirements for the affected CAA as specified in the agreed certification basis or as written on the type certificate data sheet of the affected product. A DER may approve this data only for the aircraft models for which the DER is authorized. When approving data to harmonized requirements, the DER should complete Form 8110-3 to identify the applicable portion(s) of 14 CFR rather than the foreign regulations.

b. FAA-Accepted Foreign Requirements. A finding of compliance also may be made to requirements that have been adopted or accepted by the FAA, such as JAR-VLA, when used in certifying certain small aircraft. Form 8110-3 is used to approve or recommend approval with U.S. requirements or foreign CAA regulations as authorized by the ACO.

c. Compliance Findings Outside the United States. A DER may be authorized to find compliance to 14 CFR on behalf of the FAA in a country other than the United States under the following conditions and limitations:

(1) Project ACO. The project ACO must coordinate, as applicable, with the certificate managing ACO for significant projects as noted in paragraph 2-4c. of Order 8110.4.

(2) DER Access. The DER and the FAA should be aware that some countries do not allow FAA designees to operate in their jurisdiction, or prefer to be given the opportunity to participate on major FAA projects themselves, in lieu of a DER conducting the requested tasks.

(3) U.S.-Certificated and Foreign-Registered Aircraft. The DER may engage only in activities pursuant to a U.S. type certificate (TC)/FAA approval or by direction of the project ACO.

5/04/2007 8100.8C

NOTE: DERs are never authorized to work for another CAA in their FAA DER capacity.

(a) U.S.-Registered Aircraft. Before a project ACO authorizes a DER to perform any authorized function(s) outside the United States, the project ACO must provide the cognizant CAA with written notification before the DER’s arrival, unless prior written CAA acknowledgment exists. The notification will outline the proposed visit (anticipated activities, length of stay, etc.).

NOTE 1: The FAA is responsible for contacting the CAA to provide notification and (if required by the CAA) concurrence for the designee’s activities.

NOTE 2: For CAAs with bilateral agreements, notification of a U.S. designee working outside the United States on a U.S. certification project using a U.S.-registered aircraft is provided as a courtesy to the CAA where the work is being performed. For a list of bilateral agreements, go to the Aircraft Certification Service Products and Services Web site at http://www.faa.gov.

(b) Foreign-Registered Aircraft. If an aircraft is on a foreign registry, the project ACO must have requested and received written permission/authority from the country of registry before conducting any activity with the aircraft. The applicant must submit the letter, or the ACO must obtain the letter from the airworthiness authority of the country of registry with the supplemental type certificate (STC) application, unless prior written permission exists. The foreign CAA letter should state that the CAA will accept the modification itself and that the CAA has no objections to the use of FAA designees to approve this work (for example, FAA DARs making findings of conformity, or DERs making findings of compliance for modifications/alterations on the aircraft registered in their country).

NOTE 1: The FAA is responsible for contacting the CAA of the country of registry to obtain CAA concurrence for the designee’s activities.

NOTE 2: Agreement from the CAA of the country of registry is required by the International Civil Aviation Organization as evidence of the CAA’s awareness of its continued airworthiness and reporting obligations for the modification.

(4) Conformity Inspections. A DAR/DMIR with proper FAA authorization may conduct and verify conformity inspections required for the project. The DER should meet with the project ACO/MIDO as an initial step in the project to establish that the proposed DER and DAR/DMIR have the knowledge of the aircraft type design necessary to make findings of data compliance and conformity. For additional guidance concerning conformity inspections, refer to Order 8110.4.

8100.8C CHG 6 1/5/2010

(5) Reporting Activities. During the DER’s stay outside the United States, the project ACO may require the DER to report activities periodically.

(6) FAA-Approved Repair Stations. DERs working with FAA-approved repair stations in foreign countries must give prior notification, in writing, to the FAA flight standards international field office (IFO) having cognizance over the particular repair station involved. For identification and location of IFOs, DERs should consult the ACO or a regional FSDO.

(7) Feedback to Foreign Authorities. On some occasions, DERs may conduct certification activities in facilities that hold an approval from their local CAA. Problems may be encountered during the U.S. project certification activities, such as test failures due to nonconforming test articles or inattention to test plan details. Such experience might be evidence of a system breakdown or major problem at the facility. If such problems are encountered, the DER must advise the project ACO by providing the details of any problems experienced. The ACO will then determine if any systemic issues or major problems should be forwarded to the applicable CAA for its consideration.

7/18/2008 8100.8C CHG 2

CHAPTER 4. AIR APPLICATION PROCESS

CHAPTER 4. AIR APPLICATION PROCESS

400. GENERAL. This chapter describes the process by which a qualified private person may apply for appointment as an AIR designee. The initial contact may be a verbal request for information or a request for an application package. Initial contacts are opportunities for the FAA to share with the prospective applicant the responsibilities, expectations, and qualification requirements of designees. By providing this information, the FAA may find that some individuals elect not to submit an application based on their inability to satisfy the high qualification requirements for appointment. This initial contact stating the high FAA expectations for designee appointment may eliminate resource hours being expended on application packages that would be rejected.

Continue reading ↓ 120 of 674 passages shown