Order 1320.46A Advisory Circular System
This document is cancelled. Cancelled by 1320.46B. Check the official source before relying on it.
Text read by OCR from a scanned file (11 of 54 pages). Check the original, as some words may be misread.
1
Advisory Circular System
August 23, 1995
DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
Distribution: A-WXYZ-2; ZMS-321; ZMS-328
Initiated By: ABC-100
RECORD OF CHANGES PIRECTlVE NO.1 1320.46A
CHANGE SUPPLEMENTS OPTIONAL CHANGE SUPPLEMENTS OPTIONAL TO TO
BASIC BASIC
5
8/23/95 1320.46A
FOREWORD
The advisory circular (AC) system became effective in 1962. It provides a single, uniform, agencywide system that contains all materials structured to give guidance and information to the public. The Federal Aviation Administration (FAA) has used this system to distribute advisory material of a nonregulatory nature to FAA recipients, industry. the aviation community, and the public. Promoting and sustaining this role requires close liaison between originators and personnel responsible for review and clearance of advisory circulars.
This order sets forth current and improved procedures for preparing and processing advisory circular information. It explains the way the system operates, lists the significant responsibilities of issuing offices, services. and regional components, and establishes standards for format, writing, and clearance procedures.
Preparers requiring additional assistance (i.e., placing a publication on sale. etc.) should consult with the appropriate Directives Management Officer (DMO), or Directives Management Representative (DMR). The Office of Business Information and Consultation, Corporate Information Division, ABC-lOO, is available to assist originators and DMO's and DMR's.
CC(~;;~
Acting Direct;;~f ~ness Information and Consultation
Page i (and ii)
7
8/23/95 1320.46A
TABLE OF CONTENTS
CHAPTER 1. GENERAL … 1
1-1. PURPOSE … 1 1-2. DISTRIBUTION … 1 1-3. CANCELLATION … 1 1-4. BACKGROUND … 1 1-5. EXPLANATION OF CHANGES … 1 1-6. DEFINITIONS … 1 1-7. RELATED READING MATERIAL … 2 1-8. FORMS … 2 1-9. SCOPE … 3
CHAPTER 2. RESPONSIBILITIES … 5
2-1. OFFICE AND SERVICE DIRECTORS, DEPUTIES AND REGIONAL AIRCRAFT CERTIFICATION DIRECTORATES … 5 2-2. OFFICE OF THE CHIEF COUNSEL AND REGIONAL ASSISTANT CHIEF COUNSELS … 5 2-3. THE OFFICE OF BUSINESS INFORMATION AND CONSULTATION … 6 2-4. DIRECTIVES MANAGEMENT OFFICERS (DMO's) … 6 2-5. THE OFFICE OF BUSINESS INFORMATION AND CONSULTATION … 7 2-6. THE OFFICE OF .PUBLIC AFFAIRS … 7 2-7. WRITERS … 7 2-8. REVIEWING OFFICES … 7 2-9,· USERS … 7 2-10. THRU 2-12. RESERVED … 7
CHAPTER 3. AN OVERVIEW OF THE SYSTEM … 9
3-1. DESCRIPTION … 9 3-2. TYPES OF ADVISORY CIRCULARS … 9 3-3. ADVISORY CIRCULAR NUMBERING SYSTEM … : … 10 3-4. SELECTING SUBJECT NUMBERS FOR ADVISORY CIRCULARS … 10 3-5. ASSIGNING/OBT AINING CONSECUTIVE NUMBERS TO ADVISORY CIRCULARS … 11 3-6. REVALIDATION … 11 3-7. CHECKLISTS … 11 3-8. MICROFICHEDIP APER ADVISORY CIRCULARS … 12 3-9. THRU 3-12. RESERVED … 12
CHAPTER 4. PREPARATION AND PLANNING … 13
4-1. FORMATS AND PLANNING … 13 4-2. SAMPLE FORMS … 15 4-3. CHARTS AND GRAPHICS … 16 4-4. ·KEYING ARTWORK … 16 4-5. CLEARANCE PROCEDURES … 16 4-6. SIGNATURE … 19 4-7. REVISIONS … 19 4-8. CANCELING ADVISORY CIRCULARS … 21 4-9. FEDERAL REGISTER DOCUMENT DRAFTING … 21 4-10. THRU 4-14. RESERVED … 21
Page iii
8
1320.46A 8123195
CHAPTER 5. WRITING STANDARDS .••• … ••....••..••••• … •••• … •••.•....• … 23
5-1. GENERAL REQUIREMENTS ...••..•.•••....• … •....•• … • … •.•.• … ••..••.•...• … 23 5-2. WRITING RULES … 23 5-3. REFERENCES … 23 5-4. EMPHASIS ON TEXT … 24 5-5. CAPIT ALIZATION … 24 5-6. ABBREVIATIONS … 24 5-7. QUOTATION MARKS … 24 5-8. COPYRIGHTS, CREDIT LINES, AND ACKNOWLEDGEMENTS … • … ••••...••.•••••.•.•••••.••••••.•.•.•.•.... 24 5-9. LEGENDS FOR TABLES AND FIGURES … ••.••.•.•.•.•••.• … •.•...•.• … •• … • … •.... 25 5-10. THRU 5-12. RESERVED … 25
CHAPTER 6. PRINTING AND DISTRIBUTION PROCEDURES … 27
6-1. PREPARING THE PRINTING REQUISITION .•• … •.•.• … •.••..• … •...••••• … • … • 27 6-2. FREE ADVISORY CIRCULARS … 27 6-3. FOR SALE ADVISORY CIRCULARS … 27 6-4. DISTRIBUTION AND FILING … 27 6-5. STOCKING AND ORDERING AC's … 29 6-6. THRU 6-10. RESERVED … 29
APPENDIX 1 … ••...••• … •.•.• … •..•.• … ••••..••••.. A 1-1
FIGURE 3-1.. GENERAL SUBJECT AND SPECIFIC SUBJECT NUMBERS … AI-I FIGURE 3-1.. GENERAL SUBJECT AND SPECIFIC SUBJECT NUMBERS, CON'T … AI-2 FIGURE 3-2 .. SAMPLE FAR GUIDANCE MATERIAL … • … AI-3
APPENDIX 2 … A2-1
FIGURE TITLE 4-1. SAMPLE ADVISORY CIRCULAR MASTHEAD … • … • … A2-1 FIGURE TITLE 4-2. SAMPLE CONVENTIONAL TITLE PAGE WITH GPO SALES LINE … A2-2 FIGURE TITLE 4-3. SAMPLE ADVISORY CIRCULAR ISSUANCE RECORD … • … A2-3 FIGURE TITLE 4-4. SAMPLE CONTENTS PAGE … A2-4 FIGURE TITLE 4-5. SAMPLE FRONT (SEPARATE) COVER WITH ARTWORK … • … A2-5 FIGURE TITLE 4-6. HOW TO PREPARE FAA FORM 1300-2, CLEARANCE RECORD … A2-6 FIGURE 4-6a. SAMPLE CLERANCE RECORD … ; … A2-7 FIGURE 4-7. SAMPLE PAGE CONTROL CHART … • … A2-8
APPENDIX 3 … • … ' … •.•....••... A3-1
FIGURE 6-1. SAMPLE PRINTING, BINDING, DISTRIBUTION,
AND EDITORIAL SERVICES REQUEST … A3-1 FIGURE 6-1. SAMPLE ANNOUNCEMENT OF AV AILABILITY … A3-2
Pageiv
9
8/23/95 1320.46A
CHAPTER 1. GENERAL
1-1. PURPOSE. This order prescribes standards and procedures for the use of the Federal Aviation Administration (FAA) Advisory Circular (AC) System. The AC system provides guidance, information, and NONREGULATORY material to the general aviation community and to the public. This order provides explanatory and guidance material to those responsible for disseminating Federal Aviation Regulation (FAR) related information.
1-2. DISTRIBUTION. This order is distributed to division level in Washington, regions and centers, and to all Directives Management Officers (DMO's).
1-3. CANCELLATION. Order 1320.46, FAA Advisory Circular System, dated May 31, 1978, is canceled.
1-4. BACKGROUND. The Joint Committee on Printing and Binding Regulations (JCP), operating under the authority of Title 44, United States Code, directs Federal agencies to establish and maintain a program governing the preparation and production of publications. Since 1962, AC's have been used by FAA as a medium for publishing information of an advisory nature or to show a method acceptable to the Administrator for complying with a related FAR.
1-5. EXPLANATION OF CHANGES. The Office of Business Information and Consultation (ABC), administers the AC system and processes AC's which will be signed by the Administrator, associate administrators, or certain assistant administrators. Previously, the Office of Information Technology and the Office of Aviation Policy, Plans, and
Management Analysis (APO) were responsible for these functions. This revision:
3. Defines the terms which are applicable for interpreting what constitutes an AC.
b. Incorporates designated regional aircraft certification directorate responsibilities as prescribed in Order 8000.51, Aircraft Certification Directorates.
c. Clarifies the Office of the Chief Counsel and Regional Assistant Chief Counsels clearance responsibilities.
d. Prescribes FAA Form 1320-15, Advisory Circular Masthead, as a multiple use form in the advisory circular system. This form can be used for issuing, revising, or making a change to an AC.
e. Documents the responsibility to the Office of Business Information and Consultation for publishing AC 00-2, Advisory Circular Checklist and Status of Other FAA Publications. The checklist keeps internal users and the
public apprised of the status of advisory circulars and the status of other FAA publications sold by the Superintendent of Documents, U.S. Government Printing Office (GPO).
f. Provides guidance on the issuance of advisory circulars on microfiche (see paragraph 3-8).
g. Places reference and subject-matter material close to the chapter it relates to.
1-6. DEFINITIONS. The terms defined in this order apply to the AC system.
3. The AC System is a process for making available to the general aviation public information corresponding to the subject areas of the Federal Aviation Regulations (FARs) (Title 14, Code of Federal Regulations).
b. Advisory circulars are written communications in which an FAA official issues explanatory and guidance material that is informational in nature and bears no semblance to regulatory-like language.
c. The AC Checklist contains titles, stock numbers or sale prices of AC's and other FAA publications.
d. Announcement of Availability (clearance not required for this AC) is an advisory circular which carries the same AC number and title as the basic AC it is describing. It can also be issued for other FAA publications (internal directives, reports, charts ) which are determined to be of use or interest to the public or offered "for-sale" by the Superintendent of Documents, National Technical Information Service, or some other source. (See paragraphs 4-
Id(14), 6-4a(5), and figure 6-2.)
e. Camera ready copy is clean typewritten copy (single spaced), reproduction proofs, artwork, or previously printed material.
f. A Change is used to add new information to an existing AC. Issued only when the basic AC cannot be readily changed.
g. The Circle Folios are handwritten numbers that are circled. Circle folioing is shown in non-reproducible pencil on the bottom pages of manuscript or camera ready copy to indicate the order in which the material is to be printed and assembled. Also identifies blank pages.
h. Contents is a listing in order of appearance of the contents of a book (Heading "Table of Contents" should not be used).
10
i. Covers. AC's not exceeding 32 PRINTED pages shall have self-covers; i.e., covers of the same paper stock as the inside pages. Separate covers may be specified or used for publications of more than 32 PRINTED pages. Separate covers should be used on AC's that are offered "for-sale" through the Superintendent of Documents.
j. Editorial Update is only used when an existing AC requires minimum changes to update "how to order" instructions for the benefit of the public. No initial external distribution is made on an editorially updated AC. Updated copies replace existing stock copies.
k. Federal Aviation Regulation is a rulemaking procedure that promotes and regulates civil aviation in a manner that will provide for the safety of flight, foster its development, and provide for the safe and efficient use of the airspace.
I. Folio.
(I) page numbers printed on a page; (2) page numbers inserted on copy to indicate to printer the page layout of the publication and indicates blank pages as well as printed pages (see "circle folio").
m. Format is the shape, size, and the general makeup or arrangement of the elements of an AC. The elements in order of use include the cqver, title page, table of contents, text, attachments (including bibliography, appendixes, glossary, and subject index). Every AC, depending on its complexity and purpose, does not have to include each element.
D. Image area is the exact area on a page within which printed material will print (show).
o. Manuscript is the completed typewritten text (double spaced) submitted for composition (typeset, electronic publishing, desk top publishing, etc.).
p. Microfiche is a sheet of film containing multiple microimages (up to 97 pages of text) in a grid pattern and a heading or title which can be read without magnification.
q. GPO Form 3868, Notification of Intent to Publish, is a key element in the decision of the Superintendent of Documents, U. S. Government Printing Office (GPO), to place a publication on sale. It provides information that will assist in adding publications to the Federal Depository Library System. It can be prepared by the originator and submitted to the Directives Management Officer (DMO) to notify the Office of Business Information and Consultation, Corporate Information Division, ABC-I 00, that a particular AC is planned for future issuance. Otherwise, ABC-IOO will prepare this form.
r. Offices means offices and services in Washington headquarters and regional directorates who are responsible for clearing and approving ACs.
s. Page is the front or reverse of each sheet of paper in a publication (may be printed or blank). To clearly identify each numbered page of text, the word "Page" may also be shown.
t. Revision is the complete reissuance of an existing AC, usually when more than 50 percent of the text is changed.
u. Shall. The word "shall" is used by FAA in an imperative sense. It is mandatory. The word "shall" is not be used in the text of an AC.
v. Text is the main body of the subject material in the AC as distinguished from Contents, Glossary, Appendix, Index, or others.
1-7. RELATED READING MATERIAL. Use the latest edition of the publications listed below as reference tools:
a. Advisory Circulars (AC).
(I) AC 00-2, Advisory Circular Checklist.
(2) AC 00-44, Status of Federal Aviation Regulations.
(3) AC 11-2, Notice of Proposed Rulemaking Distribution System.
b. FAA Orders.
(I) Order 1320.1, FAA Directives System.
(2) Order 1710.11, FAA Publication Sales Services and Liaison with the Superintendent of Documents, U.S. Government Printing Office (GPO).
(3) Order 1720.18, FAA Distribution System.
(4) Order 1720.29, Superintendent of Documents Distribution of FAA Safety Related Publications.
(5) Order 21 00.13, FAA Rulemaking Policies.
(6) Order 8000.51, Aircraft Certification Directorates.
c. GPO Style Manual.
1-8. FORMS. The forms associated with the issuance of an AC are as follows:
a. FAA Forms.
(1) FAA Form 1100-1, Directory-Distribution Change Notice, NSN: 0052-00-609-5003, Unit of issue: SE, available from FAA Logistics Center.
(2) FAA Fonn 1300-2, Clearance Record, NSN: 005-00-506-7000, Unit of issue: SH, available from
FAA Logistics Center, operating stock, M-483.7.
11
(3) FAA Fonn 1320-10, Directives Typing Guide (odd and even), NSN: 0052-00-516-7003, Unit of issue: SH, available from FAA Logistics Center, operating stock, M-443.2.
(4) FAA Fonn 1320-15, Advisory Circular Masthead (also used for changes and covers), NSN: 0052- 00-885-7000, Unit of issue: SE, available from FAA Logistics Center, operating stock, M-443.2.
(5) FAA Fonn 1720-11, Publication(s) Request, available from M-443.2.
b. WA Fonn 1320-1, Advisory Circular Issuance Record, available from M-45.3.
c. DOT F onns.
(1) Fonn DOT F 1700.3, Printing, Binding, Distribution, and Editorial Services Request, available from ABC-100.
(2) Fonn DOT F 1700.15, Distribution Requirements, NSN: 0052-00-873-9000, available from M- 483.1 and FAA Logistics Center, AML-300.
(3) Fonn DOT F 1710.2, Request for Graphic, and Photographic Services, available from Corporate Infonnation Division, ABC-l 00.
d. Fonn OST F 1700.6, Stock Level Notification. (This fonn is used to activate stock level requirements. It is
sent from General Services Section, M-483.7, via ABC-
100, to appropriate DMO's so that stock can be replenished). .
e. GPO Fonn 3868, Notification of Intent to Publish, available from ABC-100. (This fonn is used when publications are to be offered for sale through the Superintendent of Documents, U.S. Government Printing Office (GPO).
1-9. SCOPE. Issuances falling within the scope of the advisory circular system are FAR-related and provide guidance and infonnation which correspond to the subject area of Federal Aviation Regulations (FAR's). The advisory circular (AC) shall make clear that the methods or procedures described are not necessarily the only ones acceptable to Federal Aviation Administration (FAA).
3. All descriptions of approved procedures that have been authorized by the FAR's are to be issued in the AC system.
b. The originator of a directive may issue an AC (Announcement of Availability) describing how to obtain the directive if it has use or is of proper interest to the pub-
lic (see paragraph 6-4a(5»). This does not preclude originators from extracting appropriate portions of internal directives and issuing them as advisory circulars in lieu of distributing the directive itself. Arrangements may also be made, through ABC-100, to have a directive sold by GPO, if it is believed to be of sufficient interest to the aviation community.
(and 4)
13
8/23/95 1320.46A
CHAPTER 2. RESPONSIBILITIES
2-1. OFFICE AND SERVICE DIRECTORS, DEPUTIES AND REGIONAL AIRCRAFT CERTIFICATION DIRECTORATES (New England, Central, Southwest, and Northwest Mountain) responsible for review and clearance of AC's shall comply with the provisions of this order.
a. The office of primary responsibility (OPR) is the office that issues an AC. See Order 2100.13, FAA Rulemaking Policies, for the listing of offices responsible for rulemaking action and OPR in related AC development.
b. Each approving official is responsible for:
(1) Determining the public's need for advisory information and guidance in the area oftheir organizational responsibility.
(2) Approving all AC's issued within their operating authority. This responsibility may not be redelegated, except as stated below:
(a) Exceptions.
L. Washington Headquarters Aircraft Certification Service (AIR) division managers may be redelegated the authority to approve/issue advisory circulars within their areas of responsibility.
k Signing authority may be redelegated to division managers for those AC's that only provide directory and/or listing type information (e.g., AC
183-32, FAA Designated Maintenance Technician Examiner Directory). Division managers may issue an "announcement of availability" for AC's and other FAA publications that are sold by the Superintendent of Documents, U.S. Government Printing Office (GPO) or from other sources, such as National Technical Information Services (NTIS).
(3) Assigning to the AC its basic subject matter series number. (This number also relates to the distribution pattern given the AC, i.e., AC 20 series-Aircraft, AC 60 series-Airmen, and AC 90 series-Airspace). If the AC is offered for sale to the public the distribution pattern will be lessened to "FAA Only" with limited distribution to the military.
(4) Ensuring that material contained in draft advisory circulars does not conflict with policy, authorities, standards, and procedures stated in other official FAA documents.
(5) Ensuring that all AC's are issued in the format prescribed by this order.
(6) Ensuring that ABC-IOO, is informed when the DMO is changed to assure continued communication between ABC-IOO and DMOs.
(7) Ensuring that the DMO and OPR are responsive to out-of-stock notices (Form OST 1700.6, Stock Level Notification) sent from General Services Section, M- 45.3., through ABC-IOO, by the response due date.
(8) Coordinating and controlling AC activities through their assigned DMO's.
(9) Coordinating AC's with appropriate other offices of interest.
(10) Coordinating all ACs, except directory type listings or announcements of availability, with established legal counsel offices within their jurisdiction. The Office of the Chief Counsel clears AC's for Washington headquarters and the Regional Assistant Chief Counsels clear AC's initiated by their regional offices. If the AC is a joint venture and is being signed by a director in Washington headquarters, it shall be cleared by the Office of the Chief Counsel.
(11) Referring to higher authority for approval those AC's that have raised issues that cannot otherwise be resolved.
(12) Issuing and updating, as necessary, AC's and establishing revalidation dates.
(13) Canceling, by memorandum to ABC-\ 00, any AC that has not been superseded by another AC identifier. The memorandum should mention that the AC is no
longer beneficial to the aviation pUblic. Signing authority for cancellation of an AC may be redelgated to the division manager of the OPR. (See paragraph 4-8.)
2-2. OFFICE OF THE CHIEF COUNSEL AND REGIONAL ASSISTANT CHIEF COUNSELS. Legal counsel offices throughout FAA, in conforming with the AC system and FAA rulemaking policies, shall clear all ACs that are not a directory-type listing or announcement of availability.
a. The Office of the Chief Counsel and Regional Assistant Chief Counsels are responsible for:
(1) Reviewing and clearing all draft AC's within their jurisdiction to assure that they are "neither used for nor have the effect of regulations." Reprints, announcements of availability, or directory type listings need not be cleared by legal counsel offices.
(2) Returning the draft AC with comments, if any, to the originator by the response due date.
PageS
(3) Notifying the originator, in advance of the response due date, that additional reviewing time (ordinarily not to exceed 30 work days) is requested, if necessary. If more than 30 work days are needed, notification will be given.
14
b. The Office of the Chief Counsel:
(1) Issues AC 00-44, Status of Federal Aviation Regulations, as necessary.
(2) Serves as FAA's Liaison, Certifying and Authorizing Officer with the Office of the Federal Register, National Archives and Records Administration.
(3) Provides FAA users with guidance on how to prepare AC materials for entry in the Federal Register (see paragraph 4-9).
2-3. THE OFFICE OF BUSINESS INFORMATION AND CONSULT A TION has jurisdiction over the AC System Program.
a. The Corporate Information Division (ABC-IOO), is responsible for the following activities:
(1) Coordinating throughout FAA the development and maintenance of the AC System.
(2) Evaluating agency AC system operations and recommending appropriate improvements for refining the system.
(3) Developing and reviewing the AC system's publication and distribution standards and procedures.
(4) Developing, maintaining. and publishing reports. checklists, and similar publications covering AC activity.
(5) Providing advisory assistance to offices and services throughout FAA in developing, improving, and implementing the AC System.
(6) Providing operational liaison for all FAA elements with the Office of the Secretary of Transportation (OST) and GPO for pricing FAA publications intended for sale and cataloging.
(7) Advising and assisting offices and services throughout FAA in the preparation, planning, and printing of AC's and. upon request. other publications.
(8) Arranging to publish appropriate listings and descriptions of advisory circular material (AC 00-2, Advisory Circular Checklist and Status of Other Publications).
(9) Assigning sequential numbers to AC's.
(10) Reviewing and clearing all AC's for conformance to agency, departmental, and Federal publishing requirements.
(11) Issuing AC 11-2, Notices of Proposed Rulemaking Distribution System.
(12) Maintaining a master microfiche reference file of all AC's.
b. The final reviewing control point is with ABC- 100 for the printing and distribution of advisory circular (AC) material.
2-4. DIRECTIVES MANAGEMENT OFFICERS (DMO's). DMO's shall assure that the following advisory circular activities are performed: .
a. Managing, controlling, and coordinating all AC activities within their organizations.
b. Assisting AC originators in planning, developing, consolidating, selecting the correct distribution to reach the correct audience, and coordinating AC's from the draft stage to completion.
c. Ensuring that all AC's originated within their organizations meet the clearance, format. and writing standards of this order, and that these ACs are kept up-todate in order to avoid reprinting obsolete material.
d. Ensuring that necessary preliminary clearances for forms and reports are obtained before any draft is released to outside clearing offices for comment.
e. Ensuring that the distribution listed on the printing request (Form DOT F 1700.3) is accurate for the intended audience.
f. Making sure that one copy of the signed original AC is sent to ABC-I 00 for microfiching purposes.
g. Establishing within their organizations AC improvement meetings and arranging for short training sessions on AC preparation as necessary.
h. Maintaining complete case files on all AC's originated by their offices, or where case files are maintained on a decentralized basis, making certain that files are being maintained correctly.
i. Reviewing out-of-stock notices for AC's and determining in conjunction with the originator if reprinting, revising, or cancellation is necessary.
j. Acting as the central point for AC liaison between the originating office and ABC- I 00.
k. Reporting to ABC- I 00 any information necessary to ensure the accurate maintenance of the Advisory Circular Checklist. When organizational routing sym-
15
bol changes take place, case files are transferred to another jurisdiction, or DMO is changed, ABC-lOO is to be noti-
fied, in writing, of such a change.
2-5. THE OFFICE OF BUSINESS INFORMATION AND CONSULT A TION. The Corporate Infonnation Division (ABC-IOO) acts as the DMO in processing ACs for final approval of the Administrator, associate administrators, and certain assistant administrators.
2-6. THE OFFICE OF PUBLIC AFFAIRS. The Office of Public Affairs (APA) issues the Guide to FAA Publications. The FAA Public Inquiry Center, APA-200, provides publication inquiry services.
2-7. WRITERS. Writers should become acquainted with applicable portions of this order before they start drafting of a planned AC.
a. Writers are responsible, through their supervisors, to their approving official for:
(1) Complying with the physical fonnat requirements prescribed in this order and consulting with their DMO, if necessary, on any questions or problems which may arise.
(2) Familiarizing themselves with the writing standards prescribed in this order and writing in a style that can be easily understood.
(3) Assigning the correct (FAR-related) subject number to the AC.
(4) Consolidating AC's on the same subject, where possible.
(5) Detennining approval authority to ensure proper clearance, and whether the AC should be for sale through GPO or free from FAA.
(6) Ensuring that draft AC's are cleared with the appropriate offices, including clearance requirements for proposed fonns and reports. .
(7) Ensuring that the final administrative processing of each AC is cleared through appropriate officials and the DMO.
(8) Ensuring that feedback on comments not adopted or those adopted in part is prepared and returned to the originator (e.g., office/service) of the comments.
(9) Confonning with alI editorial rules and standards prescribed in the U.S. Government Printing Office Style Manual.
(10) Obtaining pennission to use copyrighted material, when appropriate.
b. Joint authors should make sure that the proposed AC is reviewed and agreed upon by both parties before external clearances take place.
2-8. REVIEWING OFFICES. AC reviewers are responsible for giving high priority to clearing AC's from other offices. This review should be prioritized so that it would meet the issuing offices scheduled due dates and deadlines. (See paragraph 4-5b.)
2-9. USERS. Users who find a conflict in policy or technical content between any AC, agency directive, FAR, FAA policy, or other agency documents, shall notify the originator in writing with a copy to ABC-J so that the Office of Business Infonnation and Consultation may be aware of the conflicting infonnation.
2-10. THRU 2-12. RESERVED
Page 7 (and 8)
17
8/23/95 1320.46A
CHAPTER 3. AN OVERVIEW OF THE' SYSTEM
3-1. DESCRIPTION. This chapter describes the AC System, responsibilities for its operation, issuing authorities, authorized AC formats, standards, AC numbering system, preparation and clearance procedures, distribution and printing procedures. The AC system is designed to:
a. Set forth methods, procedures, and practices acceptable to the Administrator for complying with the Federal Aviation Regulations (F ARs).
b. Recommend safe procedures, standards, and practices to all categories of operations in the aviation community.
c. Announce the availability of publications or reports of other agencies and give instructions for ordering.
d. Provide:
(1) Safety release material including reminders, warnings, and advice on specific hazards, and present safety information resulting from research studies.
(2) Information for the use of the air traffic control system.
(3) Information concerning the FAR criteria, standards, and specifications which must be met as a condition ofpanicipation in the Federal airports programs.
(4) Current information on agency-sponsored programs, meetings, or symposiums.
(5) Textbook and training manual type material on aviation operational and technical subjects.
(6) Listing of certificated operators, agencies, and registered aircraft.
(7) Guidance to applicants preparing to take written tests on the aeronautical knowledge requirements for airman certificates and ratings.
(8) Guidance to the aviation community on defense readiness measures.
(9) Preparation guidance to applicants for certification or rating flight tests.
(10) Syllabi of training lessons to assist those preparing to qualify for specific airman certificates and ratings.
3-2. TYPES OF ADVISORY CIRCULARS. AC's are written communications in which an FAA official issues explanatory and guidance material that is entirely informational in nature. They remain in effect until they are canceled by another AC identifier or because the information contained in the AC is no longer beneficial to the aviation
community and public. They are updated by changes or a complete revision. There are two types of ACs-standard and nonstandard (short and long).
a. Short AC's. Short (standard) ACs are used when the subject matter generally consists of 31 PRINTED pages or less. (See standard format, paragraph 4-1 b(3).)
b. Long AC's. When an AC is long-generally consisting of 32 PRINTED pages or more, include a Contents (not a 'Table of Contents") preceding the text (see paragraph 4-lb(4) on nonstandard formatting.) List in the contents page(s) each chapter, section, paragraph, figure, and appendix in order of appearance. Show the page number on which the division first appears. Do not list subparagraphs. Give the number of pages in each appendix in parentheses after the appendix title. List the contents of long appendixes. List illustrations at the end of the Contents listing under "List of Illustrations" or "List of Figures" or simple "Illustrations," or "Figures" as shown in figure 4-4. Make up the AC as follows:
(1) Cover. Prepare a front cover on FAA Form 1320-15 as illustrated in figure 4-5. Generally, print the front cover on 100 I b. vellum stock. Request on the printing requisition a back cover (page 4 of cover, usually blank) ofthe same paper stock (see paragraph 4-4d). Figure 4-1 shows the basic masthead for all AC's when the nature of the material does not require a different size, binding, or text presentation.
(2) Consolidated Reprint. Follow instructions provided in paragraph 4-1 b(l )(a)(I) and (2) if cover artwork is required for a consolidated reprint notation.
(3) Masthead Sheet. Prepare a masthead sheet, FAA Form 1320-15, containing the basic information specified in paragraph 4-1 d. Put the signature (see paragraph 4-6) and title of the approving official on this page also (or the second or third page if material runs over). Locate the masthead sheet on the first right~hand page after the cover. This sheet is illustrated in figure 4-1. Some nonstandard AC's (depending on format and design) have a title page rather than the masthead sheet when the usual AC paragraphs are not necessary.
(4) Contents. Prepare the contents beginning with the right-hand (odd-numbered) page following the transmittal masthead sheet.
(5) Text. Begin the text at the top of the first right-hand odd-numbered page after the contents.
(6) Reserving Numbers for Future. Looseleaf AC's designed for Change pages may plan for future inser-
18
tion of additional material by reserving the necessary chapters. Make the reservations as follows:
(a) Chapters and Sections. Show reserved chapters, sections, and paragraphs in the Contents. Do not use blank pages in the text to indicate reserved sections. Give the planned chapter or section title if known or simply word "RESERVED." For Example:
CHAPTER 14. [RESERVED.] or CHAPTER 14.LIMIT A TIONS [Reserved]
NOTE: List the reserved paragraphs in the same manner in the Contents. Note brackets around word, "Reserved" to denote editorial action and not title of the paragraph.
(b) Paragraphs and Sections. Show reserved paragraph numbers in the text flush to the left margin as with any other paragraph. Show reserved sections centered on the page. For example:
131.-169. [RESERVED.] (flush with left margin)
SECTION 7. [RESERVED] (center on page)
3-3. ADVISORY CIRCULAR NUMBERING SYSTEM.
a. Advisory Circular (AC) Relationship to Regulations. AC's are classified by subject matter areas corresponding to the subchapter and Part titles of the Federal Aviation Regulations (FAR's). AC's are identified by:
(1) GENERAL subject numbers corresponding to the related general subject titles of the FAR subchapters or
(2) SPECIFIC subject numbers corresponding to the related FAR Part numbers (see figure 3-1).
(a) FAR Related. A SPECIFIC subject number must be used whenever the AC is based on a FAR Part. For example, a circular pertaining to a specific regulation must be numbered to correspond not only to that Part but, whenever possible. to the specific SECTION NUMBER in the Part, such as AC 43.13-1). In addition, to help further identify FAR related material, the words, "F AR GUIDANCE MATERIAL," should be shown in the subject area of the AC. (See figure 3-2.) If the subject wording is long, place the words, "FAR GUIDANCE MA TERIAL" centered on the black bar line above the subject area (see paragraph 4-1 d( 4) and figure 3-2).
(b) Subchapter Related. A GENERAL subject number must be used whenever the AC is based on a subchapter title area of the FAR (for example, AC 23-3).
b. Subject Area Numbers. The general subject numbers and specific subject numbers are shown in figure 3-1 (general subject titles are in all capital letters).
c. Breakdown of General Subject Area Numbers. When the volume of AC's in anyone subject area warrants, a subsubject numbering system may be established. The general subject area number will be followed by a slash and a number to indicate the subsubject, i.e., 150/5100-3A. The subsubject number is taken from the latest edition of Order 0000.1 , FAA Standard Subject Classification System.
d. Identification Numbers. An AC is identified by a general subject area number or a specific subject number followed by a dash and a consecutive number. Each "dash number" will be used only once with the same subject number. Revised circulars (excluding AC 00-2, Advisory Circular Checklist) will have a capital letter (A, B, C, etc.) after the original consecutive (identifying "dash") number. (For example, AC 23-3C indicates the third revision to AC 23-3.)
(1) Examples of AC Identification.
(a) General Subject Area AC. AC 20-127 (20 relates to Aircraft;-127 is the next available consecutive number ("dash number") assigned to AC 20).
(b) Specific Subject AC. AC 21.303-1 (21 relates to a specific FAR Part; .303 relates to a specific section in Part 21 entitled, "Certification Procedures for
Products and Parts;" -I is the first issuance to AC 23.303).
(c) Subcategory of Subject Area. AC 150/5200-3 (I50 relates to Airports; 5200 is a subdivision of airports safety subjects, entitled "Airport Safety"; -3 is the third consecutive number issued in the AC 150/5200 series).
(d) Revised AC. AC 150/5200-IA (first revision of AC 150/5200-1).
3-4. SELECTING SUBJECT NUMBERS FOR ADVISORY CIRCULARS.
a. General Subject Area and Specific Subject Numbers. These numbers are assigned by the writer after considering the following points:
(1) The purpose of the advisory circular (AC).
(2) The needs of the user.
(3) The number that most closely pinpoints the subject. (For example, when issuing pertinent information about aircraft performance rules for inspection, number it AC 43.15- , AC 43-15- is the FAR Guidance Material for Part 43 and not just general information on aircraft . The dash would be followed by the next consecutive number assigned by ABC-I 00.
b. Multiple Choice Subject Area Numbers. If two or more FAR Parts are covered, choose the most distinctive
19
subject area number of the group and issue the AC under this number.
3-5. ASSIGNING/OBT AINING CONSECUTIVE NUMBERS TO ADVISORY CIRCULARS. The next consecutive number ("dash number") is assigned to the AC subject number by ABC-l 00.
3. After the administrative clearance approving official has signed the Clearance Record, and the signing official has signed the Clearance Record and the original of the AC in BLACK INK, check with ABC-I00 for assignment of the next consecutive number to the AC. The next consecutive number can be reserved by telephoning ABC-
100. (This should only be done when the DMO has made final administrative clearance and the AC is ready for signature.)
b. After the assigned number and date are typed on the AC, deliver the completed Clearance Record (FAA
Form 1300-2), the Advisory Circular Issuance Record (WA Form 1320-1), original and one copy of the AC, and the printing requisition (DOT F 1700.3) to ABC-I00 for processing.
c. ABC-I00 will review the AC for format, review the clearance record for legal counsel clearance, sign DOT F 1700.3 as the final clearing review point.
d. The original AC is controlled for further processing (checking for distribution pattern being used, stock requirements, assignment of printing requisition number, and so on). The Clearance Record, background, if included, and one copy of the AC Issuance Record are returned to the DMO for filing.
e. A copy of the AC is sent to the microfiche contractor to be microfiched. The contractor will send microfiched AC's to those addressees on the established "AC Microfiche Mailing List". (See paragraph 3-8a.)
f. If the AC is to be sold by the Superintendent of Documents, deliver the AC and the printing requisition to AIM-l for preparation of GPO Form 3638, Notification of Intent to Publish. ABC-I00 will arrange with the Superintendent of Documents, Documents Control Branch, to place any FAA publication on sale. (See paragraph 4-
Ib(4)(b) regarding sales of AC's.)
3-6. REVALIDATION. Advisory Circular revalidation is a continuous program to keep all AC's up-to-date. To make the program effective, DMO's must take positive action to ensure review of all AC's originated by their issuing office on a regular basis.
3. Assigning Revalidation Dates. When an AC is issued. the issuing office shall assign a date for its revalidation review. This date shall be no later than one year from
the date of issuance or last revalidation action. In addition, an AC must be revalidated each time the stock level reaches a point when reprinting is required to avoid reprint~ ing obsolete material. (This should be done at the time a stock level notification (Form OST F 1700.6) is received by the DMO.)
(1) Recording Revalidation Dates. Record the revalidation date in the block provided on WA Form 1320-
1, Advisory Circular Issuances Record. Each DMO is responsible for establishing and maintaining a system that will alert the DMO and the author of the approaching review date. One copy of WA Form 1320-1 may be kept by date in a revalidation file. The other copy may be filed by AC number for quick reference to all current AC's issued by the DMO's originating office.
(2) In advance of the revalidation date, the originator and the DMO shall review the AC and determine what action (revising/cancelling/reprinting) is necessary. Submit a route slip or informal memorandum to the Property Use & Storage Section, M-483.7., for a stock count to be sure that a sufficient supply of the AC is available before initiating action to reprint. Revise, change, or cancel the AC if the information contained in it is no longer beneficial to users.
(3) Establish a new review date at the time of completing any necessary action (revision or reprint). If the AC is determined to be fully current and effective at the time of the review, establish a new review date for the present AC. When a revised AC is issued, complete a new AC issuance record card and submit it to ABC-I00 with the revised AC. Periodic reviews of AC's by the originating office are encouraged.
3-7. CHECKLISTS.
3. AC 00-2, The Advisory Circular Checklist and Status of Other FAA Publications, is issued annually in October. Distribution of the checklist is made to all addressees on the AC mailing list. Additional copies of the checklist are distributed to the public from M-483.7, upon request. The checklist gives the AC number, title, date, a brief description, and the price and stock number if the AC is listed as being "for-sale" by GPO. It also gives complete ordering instructions for both free and "for sale" AC's.
b. AC 00-44, The Status of Federal Aviation Regulations (FAR's), is usually issued on an annual basis. When enough changes to FAR's warrant a new status report, AC 00-44 is updated and distribution is made to all addressees on each AC mailing list. Additional copies of the status report are distributed to the public from M-483.7, upon request.
20
c. The Guide to Federal Aviation Publications is distributed to the public from M-483.7, upon request. It is designed to help customers identify and obtain FAA and other aviation-related publications issued by the federal government.
3-8. MICROFICHEDIPAPER ADVISORY CIRCU- LARS. All materials issued within the AC system will be placed on 24X microfiche. ABC-J 00 will monitor the AC microfiche system and examine the effectiveness of the system to ensure that it is working smoothly. Those who want to receive a complete set of microfiched ACs should notify ABC-JOO as mentioned in subparagraph a. below. Thereafter, each agency user on the mailing list will receive AC microfiche updates by mail from the designated micro- . fiche contractor. (See paragraph 2-9(b).)
a. Microfiched AC's (selective mailing lists).The AC Microfiche Address File, maintained by the microfiche contractor, will be the only mailing list used to distribute microfiched copies of AC's. The accessibility of complete AC information on microfiche can be made readily available to FAA users by submitting a memorandum, indicating the full mailing address, to ABC-l 00.
b. Paper AC's (selective mailing lists). FAA users, as well as the aviation community and public, who are currently on selective (20, 21,23, 33, 60, 70, 90, 120, etc.) AC mailing list will continue to receive paper copies through the use of these lists. The AC paper copy mailing lists file
is maintained by Distribution Requirements Section, M- 483.1. All requests for mailing list action should be sent to M-483.1 for processing. (See paragraph 6-4a(l».
3-9. THRU 3-12. RESERVED.
21
8/23/95 1320.46A
CHAPTER 4. PREPARATION AND PLANNING
4-1. FORMATS AND PLANNING. Advisory Circulars are issued in a variety of fonnats. The fonnat and style can vary based upon how the originator wants to release AC infonnation to the users. It is the responsibility of the WRITER with the assistance of the DMO, if necessary, to detennine the fonnat for an AC before copy preparation begins.
a. The writing standards contained in chapter 5 of this order provide infonnation on the general requirements to be applied when preparing an AC. However, to make it easier for the writer and for unifonnity of style in numbering paragraphs and subparagraphs, etc., (within the AC and directives systems) follow the guidance given in Order
1320.1 , FAA Directives System. This order gives detailed infonnation on the preparation of text and gives guidance for numbering chapters, sections, figures, attachments, and appendixes.
b. Planning an Advisory Circular. AC's must be complete and up-to-date to be effective. While most AC's are distributed free to the public, there are others that are designed to be sold by GPO. Consult with ABC-IOO before planning an advisory circular fonnat, distribution method or if a "for-sale" AC is contemplated. (See paragraph 6-4.)
(I} General Infonnation. When preparing AC copy for publication try to minimize the number of pages.
(a) Select inexpensive paper stock (Text- C.W. Writing, Sub. 40 lb. weight) and print on both sides, head-to-head.
L. If an AC is originated in Washington headquarters and cover art is required for a CONSOLIDATED REPRINT NOTATION OR OTHER ART WORK, it may be requested from the Office of Administrative Services and Property Management, Graphics and Photography Branch, M-483, on Fonn DOT 1710.2, Request for Graphic and Photographic Services, through ABC-IOO before delivery to M-483. (See paragraph 4-4d.)
k Advice on graphic services is also provided by the Multi-Media Division at the Aeronautical Center, the Logistics Division in the regions, and the Public Affairs Staff at the FAA Technical Center.
~ When preparing the printing requisition (Fonn DOT F 1700.3), order a two-piece cover on 100 lb. vellum. Mark (circle folio) the copy for the cover "Cover I, 2, 3, and 4 blank", in non-reproducible blue pencil, if no printing or art appears on cover pages.
(b) Avoid the use of two-color art work, unless it serves a specific need or relates to the transaction
of public business. A written justification must accompany all requests for multi-color art work.
(2) Masthead Sheet. Prepare a masthead sheet, FAA Fonn 1320-15, containing the basic infonnation specified below for standard and nonstandard AC's. (See figure 4-1.)
(3) Standard Fonnat.
(a) AC's are issued in looseleaf fonn, punched for a standard three-ring binder. The first page is typed on FAA Fonn 1320-15, Advisory Circular Masthead, sheet (see figure 4-1) followed by a series of pages, either typed on FAA Fonn 1320-10, Directives Typing Guide, or plain bond, containing the rest of the text. In this fonn, a standard AC is a single, integrated, self-transmitting publication unit. This fonnat is generally used for a short AC. (See paragraph 3-2a and 6-4.)
(b) Although the AC system is basically designed for typewritten copy preparation, an AC may be set in type for offset reproduction, prepared for photocomposition or electronic publishing.
(4) Nonstandard Fonnat.
(a) AC's are issued in a nonstandard format because the nature of the material may require a different size, binding, or text presentation. The majority of "forsale" AC's are issued in nonstandard two-column fonnat and are set in type. (For example, a flight training handbook (AC 61-21) requiring a spiral binding, or a technical publication (AC 00-6A, Aviation Weather) containing three-color art, or one having a wrap-around cover instead of a two-piece cover may all fall under the AC issuance system but require different methods of production.) This fonnat is generally used for a long AC.
(b) AC's following a nonstandard fonnat usually begin with a conventional title page containing the DOT signature, full title, AC number, department, agency, office, place of publication, and a GPO sales line, ("Forsale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C., 20402") if AC is to be sold. (See figure 4-2 for an illustration.)
(c) Typeset Fonnat. Use typesetting (photocomposition) or electronic publishing techniques when more economical or when a high grade printing product is required. Consult the printing organization serving you to detennine the appropriate composition method. Organizations using office automation equipment may use plain bond paper for all pages following the AC masthead page. The AC masthead page may be duplicated
22
on electronic publishing equipment. The basic fonnat for. micro-comp typeset AC's is as follows:
1. Two-column (dual column), 20 picas wide, 2-pica center gutter.
. 2.:. Ten-point type.
3. Boldface type for chapters, figures, sections, paragraphs, and other headings. On large jobs anticipating many changes, it is more economical to
"hold" or "save" the type and "pick up and correct" just in those places where changes occur. If OST is providing micro-comp service, specify on the Fonn DOT 1700.3, Printing Binding, Distribution, and Editorial Services Request, when you want type held.
(5) Issuance Record. Prepare an AC Issuance Record, WA Fonn 1320-1, containing the basic infonnation specified on the fonn. This fonn is largely selfexplanatory. (See figure 4-3.)
c. Placing Advisory Circulars on sale requires advance planning with the Superintendent of Documents, U. S. Government Printing Office (GPO). Originators must request ABC-I00 to make arrangements with GPO before they begin copy preparation. If GPO decides that there is a
potential audience for the AC they will "ride" (print enough copies for GPO to sell) the DOT printing requisition. (See paragraphs 6-3 and 6-4.) The following applies:
(1) GPO will sell only those publications printed by GPO or ordered printed through GPO or the GPO Regional Printing Procurement Offices.
(2) GPO is the final authority for pricing and selling all government publications.
(3) If for some reason, GPO cannot sell the publication, a different copy preparation (standard fonnat) may be required (see paragraph 4-lb(3».
d. Paragraphs (mandatory and optional). The sequence of paragraphs in AC's is at the discretion of the author. However, standard paragraphs furnish the necessary guidelines for the author to follow to assure issuance of a clear and functional circular. All paragraphs of a CONVENTIONAL (standard) "AC" (which confonns to established standards) must have a number and title. The paragraphs defined below must be used as specified if the infonnation is applicable and presented in the sequence listed. Use only the paragraphs appropriate to the AC you are preparing. DO NOT USE a paragraph entitled "HOW TO ORDER", as that is infonnation for an "Announcement of Availability" only. Refer to Order 1320.1, FAA Directives System, for detailed infonnation on numbering paragraphs and subparagraphs.
(1) PURPOSE. (Mandatory.}-Whenever there is more than one paragraph, always head the first paragraph "PURPOSE." Tell briefly why the AC is being issued and what it contains. Don't start the opening sentence with "The purpose of this AC .. " Start, for example, with "this advisory circular restates existing policy for ... and outlines new procedures to agree with recent regulation changes."
(2) EFFECTIVE DATE. (Mandatory, if applicable.}-For the date of the AC, always use the date inserted by the signing official in the "Date Approved" space of the FAA Fonn 1300-2, Clearance Record. When it is necessary to make provisions of an advisory circular effective on a date other than the approval date, head the next paragraph "EFFECTIVE DATE." This paragraph is required when an effective date is given for the AC.
(3) CANCELLATION. (Mandatory, if applicable.}-If an advisory circular cancels other AC's, fonns, or reports, head the next paragraph "CANCELLA TION(S)." Use special tenns to cancel, such as, "AC 105-2B, Sport Parachute Jumping, dated 8/21189, is canceled." (Although the AC system requires a revision "C" to cancel the previous issuance "B", the cancellation paragraph is helpful to users not familiar with the system and who may believe both AC's are current.) An AC may cancel another AC in a different series but no AC may cancel a portion of an AC. DO NOT CANCEL PARTS OF AN ADVISORY,CIRCULAR.
(4) RELATED FAR SECTIONS. (Mandatory, if applicable.}-Use this paragraph to cite other related sections in the same FAR to which the AC relates. For example, the AC subject content may relate EQUALLY to sections 61.47, 61.53, 61.55, and 6l.125 but the AC obviously could not carry all four section numbers. The AC would have the words "FAR GUIDANCE MATERIAL" typed in caps in the subject area of the AC or centered on the black bar line above the subject, as shown in figure 3-2. (See paragraph 3-2a(2)(a).) Likewise, use this same reference paragraph with referencing sections in any other FAR Parts, as section 65-83 or section 145.13.
(5) FORMS AND REPORTS. (Mandatory, if applicable.)
(a) List all fonns and reports that are referenced in an AC in a separate paragraph or list them in appendixes. The relative importance of the fonns or reports
in the AC (for example, a short AC prescribing a new public use report fonn) may detennine the location of these paragraphs.
1... Fonns Listing.
(aa) Complete number and full title of fonn.
23
(bb) Ordering information such as form number, title, and unit of issues, (sheet, pad, etc.).
(cc) Source of supply and availability date. Be sure it will be available at the stocking location before you establish a mandatory date for its use. Remember to list the supply sources for the public and FAA.
2. Reporting Listings.
(aa) Report title and any other report identification.
(bb) Reporting period and due dates.
(b) Give detailed instructions in the text for preparation, signature, number of copies, and where to distribute them. Some forms show this information but if they do not, the AC will have to provide it.
(6) DEFINITIONS. (Mandatory if there are many terms having particular meaning as used in the subject AC.)-Use a "DEFINITIONS" paragraph whenever an
AC introduces new terms, establishes a specific meaning to any term in the AC or when there are not enough terms to warrant a separate appendix.
(7) FOCUS. (Optional.)-This is an optional paragraph used to command the attention of a particular audience. (This paragraph might be used to alert an audience to pay particular attention to an AC which by its number or subject may appear to concern another audience. This paragraph is particularly useful (for alerting FAA personnel to the specific interest groups) because AC's have no DISTRIBUTION paragraph.)
(8) PRINCIPAL CHANGES. (Optional, but very helpful if the change is complex.)- This paragraph is used as the third paragraph to enumerate the changes made to the basic AC which was designed for a page change format. A general explanation of the number of minor changes is sufficient but significant changes should be listed and explained separately.
(9) RELA TED READING MATERIAL. (Optional.)-Use this paragraph to give the reader a guide to other source material. (FAA may refer to commercial publications if they are an excellent source of limited specialized information. Some identification, usually the publisher, must be furnished to enable the reader to locate referenced material. DO NOT INCLUDE PRICES OF ANY REFERENCED READING MATERIAL.)
(10) BACKGROUND. (Optional.)-A background paragraph, when used, is limited to information that is essential to show the development of the need for the AC. (This paragraph is recommended when the action de-
scribed occurred several years earlier and its recital furnishes the basic explanation for the need for the new AC.)
(11) DISCUSSION.(Optional.)-This paragraph is used for long summaries of examination of technical material and may appear in different sections of an AC.
(12) REQUEST FOR INFORMATION. (Optional.)-If the author wishes to invite calls for further information or clarification, the last paragraph of the AC or the transmittal masthead of a long AC may read as follows: "REQUEST FOR INFORMATION: If you want more information or have questions about this AC, write or call (organization title, routing symbol, mailing address, and phone number)".
(13) COMMENTS INVITED. (Optional.)-This paragraph is for the use of the office of primary responsibility who wants to collect helpful suggestions from the users for improvement or strengthening of the AC. (This paragraph should read as follows: "COMMENTS INVITED: Comments regarding this AC should be directed to: (organization title, routing symbol and mailing address)".
(14) HOW TO ORDER. (Mandatory in an Announcement of Availability AC.)-This paragraph is used in an AC announcing the availability of a "for-sale" AC or other FAA publications (internal directives, reports, charts) not given the usual AC distribution. DO NOT USE THIS PARAGRAPH IN THE "AC" ITSELF AS IT IS REDUNDANT THERE. (See paragraphs 1-5d, 6-4a(5) and figure 6-2.)
(15) REFERENCES. Do not use a REFERENCE paragraph. When helpful, place references in the text where their introduction is most useful. Reference publications by identifying symbol, and title for example, "AC 00-6A, Aviation Weather," or "AC 00-46C, Aviation Safety Reporting Program."
e. One-paragraph Changes. In a very brief change transmittal, an unnumbered and untitled single paragraph (single or double spaced) may be used if the standard paragraphs would serve no useful purpose. (An example would be a one-page CORRECTION NOTICE or an ERRATA SHEET to provide very brief changes to the basic AC.)
f. Appendixes. Use appendixes to AC's for long bodies of supplementary, illustrative, and other materials that cannot be incorporated into the advisory circular's text or cannot be shown close to the subject matter.
4-2. SAMPLE FORMS. If an AC calls for the use of a form, use the following guidelines for presenting instructions for its use.
24
a. Insert instructions on the sample form itself when practicable. In some cases, the percent of reduction necessary to fit the form on the page makes the printed instructions illegible. It is then advisable to insert numbers in the blank spaces on the form and place the corresponding numbered instructions on another page which can be left unreduced in size. If a completed sample of an actual form is shown, write or stamp "SAMPLE" across the face of the form. (This is especially important when the form relates to air navigation, flight operations, or some other important function that the reader must not mistake as containing usable information.)
b. A void splitting detailed instructions on the use of a form between text and appendix or figure.
c. Give requirements on number and distribution of copies and mailing instructions.
d. Tell when and where to get the form.
e. Show a sample of a completed form as a supplement to text discussion when helpful.
4-3. CHARTS AND GRAPHICS.
a. Government Printing and Binding Regulations require that illustrative materials in the text be used ONL Y when it relates directly to the subject matter and is necessary to explain the text. Insert a figure as close as possible to the referenced text.
b. Many complex procedures, requirements, and instructions can be clarified by using simple illustrations and charts. Use charts, diagrams, or other simple graphics where they will explain complex written text.
c. Professional services for artwork are available in the OST Graphics and Photography Branch (M-483) through ABC-IOO. Request such services on Fonn DOT F
1710.2. Request for Graphic and Photographic Services. Submit fonn to ABC-100 for approval before delivery to M-483. Advice on graphic services is also provided in the Multi-Media Division in the Aeronautical Center, the Logistics Division in the regions, and the Public Affairs Staff at the FAA Technical Center.
4-4. KEYING ARTWORK.
a. Text. Both camera copy and typeset copy often include half-tones, line drawings, and color process art. Separate all artwork from the typed text and number each piece of art in the lower right-hand comer in order of its appearance in the text. Follow each number with the letter "a" indicating art (l a, 2a, 3a. etc.). Then insert these art
numbers in RED INK in the text in the place where the art should appear so that the art may be scaled to size to fit that space. Circle the RED INK numbers in the text to indicate
that the numbers do not print-they are only instructions to the printer for art placement.
b. Camera Copy.
(1) Position the correctly sized art in the proper place in the text, center it over the legend, and secure with transparent Scotch tape down the sides (do not use rubber cement). Make sure tape does not cover any material to be printed. If art must be reduced or enlarged to fit the space, leave a blank space for the art and number the space in RED INK with the number of the piece of art to be inserted-la, 2a, 3a, 4a, etc.
(2) Mount art that needs to be enlarged or reduced on separate illustration board or heavy paper and mark it with the correct art number, I a, 2a, 3a, 4a, etc.
c. Typeset Copy. Mount all artwork on separate illustration board or heavy paper. If two or more pieces of art are mounted on one sheet, specify the percentage of enlargement or reduction. Number the pieces consecutively
la, 2a, 3a, 4a, etc., and insert the circled corresponding number (la) in the text where the art is to appear. The printer is allowed a three-page leeway for placing the art in the final page makeup. DO NOT MARK ON THE ART. Mark any printing instructions in the margin out of the image area (and out of camera range).
d. Cover. Number the COVER art separately as "cover 1-2, 3, and 4 blank," (if2, 3, and 4 are blank). If the
inside cover or back cover carry artwork, mark that art "cover 2" or "cover 4" as appropriate but be sure to ac-
count for "cover 3 blank" if cover 3 contains no art. (See paragraph 3-2b(l).)
4-5. CLEARANCE PROCEDURES. Originating offices are responsible for the substantive contents of each draft AC before releasing it. The drafts shall include all appendixes referred to in the text so that reviewers may comment on a complete package. Originating offices must insure that all affected offices (prior to legal counsel clearance) have an opportunity to review AC's concerning their functional or line responsibilities. Reviewing Offices shall give priority to clearing AC's from other offices. "No response received" will be entered for those office that do not respond.
a. Clearance Requirements.
(1) Clear AC's within the originating office or service first.
(2) Address clearance packages to other concerned offices, services or regional directorates after internal review. Approving authorities shall establish internal procedures for clearing AC's to make sure their comments are consolidated and submitted for consideration. DO NOT
25
COORDINATE WITH OFFICES NOT AFFECTED. Clear proposed ACs only with those organizations that are:
(a) Responsible for standards, criteria, or procedures affected by the proposed AC.
(b) Responsible for programs and activities which would be materially affected by the proposed AC.
(c) Administratively or legally responsible for making a review of the proposed AC.
(d) Originators of an AC you propose to cancel.
(3) If clearance is to be obtained from more than 11 reviewing organizations, do not use additional clearance forms to type all the routing symbols. Type a note across the clearance routing section on the original clearance form showing the routing symbols of all offices which are to clear the AC. Afterwards, reproduce required copies for submission to each reviewing office. On the top line of each copy enter the routing symbol of the designated reviewing office. When all clearance records have been returned, type each clearance routing symbol on a consolidated clearance form before submission for final approval.
(4) Clear all AC's with appropriate legal counsel. The Office of the Chief Counsel and/or the regional assistant chief counsel must be the last reviewing office so that any necessary changes required by the other reviewers will have been accomplished in the draft sent to the legal counsel.
b. Clearance Deadline/Due Dates.
(1) When. Decide on the deadline date for comments AFTER you get approval to release the draft AC. To determine the actual date, use your projected mailing-routing date, not the date of approval, as the starting point for the review period.
(2) Normal Deadlines. Give reviewers a MINIMUM of ten (10) work days after RECEIPT of the draft for clearing short or relatively routine or noncontroversial AC's. Give them more time for lengthy or complex AC's. In particular, for AC's involving implementation of or compliance with FAR's, the Chief Counselor
Regional Assistant Chief Counsel should be given a minimum of 30 days for review. When clearing ACs with regional directorates, give an extra ten (10) work days if you want the input from these regions. Additional days may be granted at the discretion of the originating office. See paragraph 2-2 for clearance procedures with Legal Counsel. Offices.
(3) Less-Than-Normal Deadlines. If you can't allow the "normal" deadlines, explain on the Clearance. Record the reason for the short comment period.
(4) Extension of Deadline Dates. When the normal deadline date cannot be met, the reviewing official should request an extension from th'e originating office. This extension is not mandatory. If the reviewing office does not request an extension and has not responded by the deadline due date, the consolidated clearance record will be annotated with the words "No Response Received". This procedure does not apply to review by the Office of the Chief Counselor the Regional Assistant Chief Counsels.
c. Preparation of Clearance Record.
(1) Prepare FAA Form 1300-2, Clearance Record. Use FAA Form 1300-2 as the official clearance and approval document for AC's. Before releasing a draft AC for comment, fill out specified blocks in accordance with the instructions contained in figure 4-6. Figure 4-6 shows a sample clearance form.
(2) Budget Impact. Advisory circulars are strictly informational and bear no semblance of directive or regulatory type language which would otherwise have an impact on agency resources. Since the information contained in an AC would have no impact on agency resources, put the statement "NO IMPACT ON FAA RESOURCES" in the reason for attached block on FAA Form 1300-2, Clearance Record. (Block 7, figure 4-6.)
(3) Attach to the Clearance Record any background material you consider helpful to a better understanding of the AC. Next, attach a copy of the draft AC including all appendixes and figures. In the case of many pieces of large, complex art containing color overlays, it is inadvisable to send them through the clearance process because the art may be damaged by too much handling. Be sure the art is properly keyed into the text (see paragraph 4- 4) so that a reviewer may see what items are being illustrated and may review the corresponding legends. If necessary, the reviewer may go to the originating office to look at any of the art.
(4) Send enough copies to each reviewing office for internal clearance routing to prevent the necessity for each receiving office from having to make "additional copies." Other than the coordination required by paragraph 2-1 b(1 0), limit coordinating points to only those offices having a real interest in the AC. As a general rule, clear AC's with offices concurrently, instead of one office after another.
d. Clearing Office Actions. Each office receiving a request for clearance must sign the FAA Form 1300-2 and return it to the originating office. An explanation of the
information required in the concur-nonconcur columns is given in the following subparagraphs.
(1) "Concur-No Comment." A check in the "Concur-No Comment" column indicates agreement with the draft AC to the extent it affects the functions and activities of the reviewing office. If the AC does not affect your office and should not have been sent to you for review, insert on the clearance form the statement, "Not of concern to us."
26
(2) "Concur-Comments/Changes Attached." A check in this column indicates that the reviewing office is in general agreement with the draft, but would like to have part of the AC changed. However, if the change is not made, the reviewing office can accept the draft as presented. THE COMMENTS HAVE TO STATE CLEARLY THE CHANGES RECOMMENDED.
(3) "Nonconcur-Comment Attached." A check in the "Nonconcur" column means that the reviewing office does not approve of the proposed AC as written. The reasons may include the effect that the AC will have on the user or that the AC may conflict with other agency issuances on the subject. THE COMMENTS MUST CLEARLY IDENTIFY AND EXPLAIN THE REASONS FOR NONCONCURRENCE AND WHAT CHANGES ARE NECCESSARY BEFORE CONCURRENCE WILL BE GIVEN. Comments regarding grammar and spelling are not reasons for nonconur comments.
FAILURE TO RESPOND WILL RESULT IN THE ORIGINA TING OFFICE SHOWING "NO RESPONSE RECEIVED"ON THE CONSOLIDATED CLEARANCE RECORD.
e. Summary of comments not adopted. Originators shall prepare a briefing statement (summary of comments not adopted) for the approving official when substantive comments on a draft AC have NOT been accepted or only accepted in part. Each comment should be preceded by the paragraph number in the coordination draft AC. Include the:
(1) Reasons for nonadoption of substantive comments.
(2) Unresolved differences requiring settlement by approving official.
f. Obtaining Final Approval. Before sending an AC on for final approval, the appropriate DMO (or other official serving in that capacity) signs the Clearance Record on the "Final Administrative Clearance" line. This indicates that the AC has been reviewed and found adequate in:
(1) Presenting its subject matter clearly and concisely.
8123195
(2) Expressing agency policies, proper authority, and clear procedures.
(3) Avoiding conflicting information or duplications with other ACs (or that arrangements for revising other ACs have been made).
(4) Meeting the AC standards prescribed in this order.
(5) Including necessary background data, explanation of unresolved issues, and other relevant documents. The approval package should contain:
(a) CLEARANCE RECORD. (A consolidated clearance record.)
(b) EXECUTIVE SUMMARY. (Only if AC is to be signed by associate administrator or higher.) The executive summary should be no longer than I page and should contain pertinent information about the AC and mention relevant items that should be brought to the attention of the reviewing official.
(c) FINAL COPY OF ADVISORY CIRCULAR. Make all necessary changes and prepare final copy for printing.)
(d) SUMMARY OF COMMENTS NOT ADOPTED. Prepare a summary of comments not adopted as stated in paragraph 4-5e.
(e) DOT FORM 1700.3, PRINTING, BINDING, DISTRIBUTION, AND EDITORIAL SERVICES REQUEST. Chapter 6 provides information on preparing the printing requisition. (See paragraph 6-1.)
(f) WA FORM 1320-1, ADVISORY CIRCULAR ISSUANCE RECORD. Complete appropriate items on this form and forward to Directives Management Officer (DMO) for sequential numbering. (See figure 4-3.)
(g) BACKGROUND MA TERIAL. Include a copy of the draft AC circulated for clearance, any AC's canceled, and any other pertinent material.
g. All AC's must have the signature and title of the office, service head or regional directorate (or authorized division manager) as provided in paragraph 2-1 b(2), associate administrator, or Administrator or the designated acting official. The approving official signs the AC in BLACK INK. The approving official also signs the Clearance Record in the "Final Approval" block and enters the date of signature in the "Date Approved" block.
h. Clearances and Approvals of the Administrator, Associate Administrator or Assistant Administrator. Originators of AC's which require review or final approval of assistant administrators, associate administrators, executive directors or the Administrator send their ACs to the Office
27
of Business Information and Consultation (ABC-l 00) which serves as the DMO for these officials. Before sending the AC to ABC-100, complete all office and service clearances and indicate assistant administrator, associate administrator, or higher clearance needed. ABC-IOO completes all processing for top management approval of ACs and returns the approved ACs to the originators to prepare for printing and distribution. The final approval package shall include:
(1) Final copy of AC.
(2) A new clearance record for final coordination signed by the head of the originating office.
(3) The consolidated clearance record(s).
(4) An executive summary.
(5) Summary of comments not adopted.
(6) The clearance records and comments received during coordination.
(7) A copy of the coordination draft (with clearance record).
(8) A copy of the AC being canceled, if appropriate.
(9) A completed WA Form 1320-1, Advisory Circular Issuance Record.
(10) A completed Form DOT F 1700.3, Printing, Binding, Distribution, and Editorial Services Request.
i. Feedback on Clearance Comments. Originators shall explain to the reviewing offices whose substantive suggestions were NOT adopted the reasons for nonadoption. "Substantive comments" are those on "what" is said in an AC, not "how" it is said. The method of advising them is optional. It may be by letter of explanation, by a copy of the briefing statement that was sent to the approving official, by telephone or in person. A notation of the date and persons participating in the discussion should be kept in the case file.
j. Obtaining AC Consecutive Number. After the administrative clearance approving official has signed the Clearance Record and the signing official has signed the Clearance Record and the original of the AC in BLACK INK, contact ABC-IOO for assignment of the next consecutive number for the AC. Deliver the completed Clearance Record, the Advisory Circular Issuance Record, the original AC and one copy for microfiching to ABC-l 00 for processing. (See paragraph 3-5 for more details.)
4-6. SIGNATURE.
8. Type the name of the signing official in initial caps and lower case letters flush with the left margin five
spaces below the last line of text. In long AC's, the signature is at the end of the transmitting masthead sheet, FAA. Form 1320-15. In short ACs, the signature is on the last page of text, or before appendixes, if any. On Change transmittals (FAA Form 1320-15 is also used), the signature is after the page control chart (see figure 4-7.) Type the signer's title in initial caps on the next line, flush with the name.
Dale E. McDaniel, Acting Associate Administrator for Administration
b. This signature format is not required on specially designed (see paragraph 4-1b(4» "for-sale" AC's.
4-7. REVISIONS. The revised AC is reissued under the same AC. number with the addition of the appropriate alphabetical letter-"A" for the first revision, "B" for the second revision, "C" for the third, and so on.
8. AC's are revised by issuing substitute pages with changed text, or by a complete revision. When it is necessary to issue a change or revision, get it to the user as far ahead of implementation as possible, so users can prepare for and install new procedures (not often required by an AC). Collect minor changes that do not significantly affect operations or methods and send them out at one time. Do not correct minor errors such as misspellings, punctuation, etc., except when making substantive page changes.
(1) Complete Revisions. Use the complete revision and reissuance method when 50 percent or more of the AC must be reprinted to incorporate the new or revised material. Also consider this method when numerous previous changes have affected the makeup of the AC.
(2) Page Changes. Issue substitute pages to incorporate new or revised material when less than one-half of the existing pages must be replaced and the AC complies with standard looseleaf format. Do not issue page changes to AC's that are two sheets of paper or less (pages 1 through 4) unless an emergency situation exists. (It would still require two sheets of paper (four pages) to issue the change-the transmittal sheet, and the revised page, two pages.) If possible hold the change to the AC until another one or two changes accumulate. Use FAA Form 1320-15, Advisory Circular Masthead, to transmit page changes to standard format AC's. Include the following information as necessary:
(8) Subject, as AIRPORT PAVEMENT DESIGN AND EV ALUA TION, date in numbers, as 1130/87, AC number, and Change number. Figure 4-7 shows an illustration.
(b) Purpose. (Mandatory). Briefly tell why the Change has been issued in the PURPOSE paragraph. Explain the method of indicating changes to the text as:
28
"The Change number and date of changed material, which
is indicated in the margins by asterisks (stars)/vertical bars (when using electronic publishing) is carried at the top of each page. Rearranged pages having no new material also carry the new Change number and date. Pages having no changes retain the same heading information." If appropriate, explain further: "Because section 3 is entirely new, AsterisksNertical Bars appear only at the top and bottom of each page."
1. EFFECTIVE DATE. (Mandatory, if applicable)
2. PRINCIPAL CHANGES. (Optional, but very helpful if the Change is complex.)
J.. CANCELLA TION(S). (Mandatory, if applicable)
(3) Editorial Updates are used when an existing AC requires minimum changes to update, such as "how to order" instructions given for the benefit of the public. No external distribution is made on an editorially updated AC. This update usually takes place when AC stock is low or stock is depleted at M-45.3 and a reprint of the AC is necessary.
b. Identification of Changes on a Text Page. Changes are identified by typing an asterisk (star) or a vertical bar (when using electronic publishing) in the left margin at the beginning of the change and in the right margin at the end of the changed material. If a number of consecutive paragraphs are changed, place an asterisk/vertical bar at the beginning of each paragraph. Flag new material that runs for several pages in the left margin at the top of each page and in the right margin at the bottom of each page. Explain the markings in the Change transmittal as indicated above.
(I) Text. Use asterisks (*) or vertical bars (when using electronic publishing) in the margins to identify revised, added, or deleted portions of the text. (Vertical bars are preferred when using electronic publishing as they are more legible.)
(a) Type an asterisk/vertical bar in the left margin of the line where the change begins and another asterisk/vertical bar in the right margin of the line where the change ends.
(b) If a change runs for several paragraphs, place an asterisk/vertical bar in the left margin at the beginning of each paragraph and a closing asterisk/vertical bar in the right margin of the line where the change ends.
(e) If a change runs over to another page, mark the continuing line at the top of the page in the left margin. New material that runs for pages should be flagged
in the left margin at the top of the page and in the right margin at the bottom of the page.
(d) Delete any old asterisks/vertical bars on the page. Remember, any indicated changed material must agree with the new date at the top of the page.
(2) "Run-around" Text. Where existing unchanged text must be moved to another page to allow for inserting new text, do not flag the old text but change the date on the page because the page is changed.
(3) Unchanged Pages. Do not change the dates of pages that are picked up and reprinted "as is."
(4) Complete Revision. In a completely revised long AC, highlight the changes in a "Principal Changes" paragraph (see paragraph 4-ld(8».
(5) Explanation of Marking System. Explain in the AC transmittal how changes are marked in that particular Change (see paragraph 4-7(b)(1) for wording).
(6) Deletions. Show deletions of any numbered subparagraph, paragraph, or section in the text and in the Contents (if listed there) to account for continuity of numbering. Show the Change number that deleted the material next to the "Deleted" notation. For example:
"7. [Deleted]-Change 2"
Mark the word "Deleted" with brackets to show that it is the editorial action taken and not the title of the paragraph.
(a) Chapter, Figure, or Appendix. Indicate where material is deleted any time the continuity of the text
is affected. Remember to mark the Contents in a like manner if the title of the deleted material is listed in the Contents.
(b) Page Deletion. Show a page deletion in the text (where appropriate) or on the preceding page by arrangement of the page number, as follows:
(e) If page 12 is deleted, number page I I as "I I (and 12)."
(d) If page 18 through 32 are deleted, number page 17 as "17 (through 32)."
(e) If page 19 is deleted but not 20, mark the center of page 19 "[Deleted]-Change 6."
(7) Canceled. If any AC's or forms are canceled, use a CANCELLATION(S) paragraph and list the items.
(8) Explanation. Use one or more paragraphs, as necessary, to explain major changes and supplementary material in the PRINCIPAL CHANGES paragraph.
29
(9) Other Information. Do not put permanent information or action instructions on the transmittal sheet. Transmittal sheets contain instructions for filing the pages attached to them.
(10) Signature. The signing official signs at the end of the page control chart or any other instructional information, flush left. The name is typed in initial caps with the title typed on the next line, flush left in initial caps and lower case. (See paragraph and figure 4-7.)
(11) Pen-and-ink Changes. DO NOT USE pen and ink changes. Whenever minor changes to an AC are necessary, issue page replacements.
c. Page Expansion. Pages may be added following a left-hand (even numbered) page only. Add a dash and consecutive number after the number of the preceding page. For instance, if a page is added between 26 and 27, it should be numbered 26-1. Numbering of additional inserted pages at that point would continue 26-2, 26-3, etc.
d. Contents Pages. Usually Contents pages will not have to be revised until the entire AC is revised. However, if added or changed material is extensive or important, issue changed pages or an entire Contents as appropriate.
e. Page Control Chart. Page control charts are placed at the end of the Changed text on the transmittal sheet to tell the user exactly which pages are to be removed or inserted. A diagram of a page control is shown below. Figure 4-7, gives a complete example of a Change page control chart.
*Note that dash-numbered pages are added only after a left-hand even page number. Double check ihe dates on the
new insert pages to be sure they agree with the new dates on the control chart for those pages.
4-8. CANCELING ADVISORY CIRCULARS. Out-ofdate AC's are a burden on the aviation community, the public, and on agency operations. Cancel an existing AC as soon as it has completely served its purpose and is no longer of value to users. The official who has the authority to cancel an AC must submit a memorandum, as described in paragraph 2-1 (b )(14), to ABC-IOO through the responsible DMO. Canceled ACs are listed in Appendix I (Cancellations and Additions) of AC 00-2, Advisory Circular Checklist. ACs will be dropped from the checklist once cancellation notification is received by ABC-IOO.
4-9. FEDERAL REGISTER DOCUMENT DRAFT- ING. When preparing a draft advisory circular (AC) for public comment you are encouraged to follow the guidelines contained in the Federal Register Document Drafting Handbook.
3. Guidance on Preparing Draft AC. The Office of the Chief Counsel, AGC-200, serves as FAA's Liaison, Certifying, and Authorizing Officer with the Office of the Federal Register, National Archives and Records Administration. In this capacity AGC-200 provides FAA users with guidance on how to prepare AC materials for entry in the Federal Register.
b. Clearance of Draft ACs. Draft ACs intended for public comment are to be coordinated with and cleared by the Office of the Chief Counsel.
4-10. THRU 4-14. RESERVED.
Page 21 (and 22)
31
8/23/95 1320.46A
CHAPTER 5. WRITING STANDARDS
5-1. GENERAL REQUIREMENTS. Advisory circulars (AC's) are used to publish infonnation of an "advisory" nature for the benefit of the aviation community and the public. AC's are not regulations and may not impose or lessen a burden on anyone, nor have a mandatory effect. AC's may not be used to add to, interpret, or relieve a duty imposed by a Federal Aviation Regulation (FAR). This chapter deals with the differences between ACs and regulations and provides guidelines for the wording to be used in AC's to avoid any semblance of regulatory-like language.
a. A void Regulation-Like Language.
(1) Words that have a mandatory significance as used in regulations such as "must," "shall," and "must not" MUST NOT be used in AC's. The word "should" is preferable.
(2) When advising on safety issues (such as installing new devices or utilizing advance techniques) avoid the use of words such as "urge," "encourage," or "strongly advise" as such words may be construed to encourage the public (reader) to adopt safety-improvement measures which exceed those prescribed in the regulations. Such language may also imply that those who elect only to meet the reguiation requirements are somehow delinquent.
b. Acceptable Means of Compliance. Advisory circulars may set forth "acceptable means" or "methods" of compliance with a particular FAR. However, the language used to explain the compliance methods in the AC must not imply that it is the only or minimum acceptable means, nor require other methods of compliance to be "equivalent," to the one described in the AC. A void words like "amend," "equivalent," or "clarify." Use the word "policy" only when referring to established agency policy.
c. Quoting Regulations. A void quoting regulations if possible, as they are frequently amended and may necessitate an AC being revised only to up-date the FAR quotation. Rather, simply reference the FAR by basic Part number and section number where possible. If it should be necessary to quote a regulation, quote it exactly and completely. Do not paraphrase or "explain" the regulation as its meaning may be changed in some aspect.
d. Incorporation by Reference into FAR's. No document, including AC's, should be incorporated by reference into the FARs unless it is absolutely necessary. The Office of the Federal Register will not approve most federal agency documents for incorporation by reference. (See paragraph 4-9.)
5-2. WRITING RULES. Review the following general guidelines and use them in preparing advisory circulars:
a. Active Voice. The active voice should be the primary fonn of expression. It simplifies readability and provides more precise statements. The passive voice should be particularly avoided in descriptions of who is expected to act or not act and of sequential events.
b. Who, When, and Where. Identify WHO (pilot, owner, mechanic, etc.,) should take action, WHEN to do it, and WHERE to send any material described in the AC. Once the actor has been identified, the description can be simplified by starting subsequent sentences with action verbs. For example, say: "Check the fuel source ... " instead of "The fuel source should be checked ... " after stating that action should be taken to avoid the use of contaminated fuel.
c. Conditions, Limitations, and Exceptions. When feasible, number or itemize conditions, limitations, and exceptions to avoid complex sentences.
d. Guide to Style. Follow the Government Printing Office Style Manual and the Word Division Supplement for punctuation, hyphenation, spelling, capitalization, abbreviation, and other style practices. Include special deviations on capitalization given in paragraph 5-5.
5-3. REFERENCES. References should be placed in the text where their introduction is most useful. Reference publications by identifying symbol and title. (See paragraph 4-1 d(I 5).)
a. Cross-references. Keep cross-references to a minimum. Repeat brief items word for word, but crossreference lengthy, technical details covered in other available sources or in another paragraph of the AC. To avoid repetition, do cross-reference other parts of the AC that are logically placed and completely covered. DO NOT cross reference common or previously defined tenns.
b. Citations.
(1) Rules for Use. When necessary to use citations or other references, use identifying symbols and complete titles the first time they appear in the text, for example, AC 00-44, Status of Federal Aviation Regulations. Thereafter, refer to AC 00-44 or Status of F ARs (AC 00-44). Notice that if you use the popular or shortened title for an AC, you must use its identifying number. Do not refer to material unavailable to the majority of the recipients of the AC. Reference fonns initially by the complete form designation and number followed by a comma and the
32
full title. Thereafter, it can be referenced by either the title or number or both as necessary for clarity to the reader.
(2) Examples of References to Other AC's.
(a) AC 43.l3-IA, Acceptable Methods, Techniques and Practices-Aircraft Inspection and Repair (full title).
(b) AC 43.13-1A, section 2, paragraph 42. (Use this "short form" reference after the AC's full title is first used.)
(c) AC 00-44, Status of Federal Aviation Regulations, current edition (for AC's that are revised frequently, specify "current edition" so that the up-to-date version will be referred to and properly supplied to a requestor).
(3) Page Number References. A void referring to a page number in an AC because a change insertion may change the number of the page on which the material referred to is located.
(4) Units of Organization. Use complete official names of organizations and the alphabetical prefix in parentheses the first time they appear. Thereafter, you may use the alphabetical prefix (i.e., AAM, AFS, AIR).
(5) Reference to Offices. In AC's, use titles, not names of persons. A void using telephone numbers, room numbers, or other data subject to change. When such references are necessary, use them only in appendixes, if possible.
(6) Reference to Laws, Code of Federal Regulations, etc. Use the citation standards given in the GPO Style Manual. If in doubt, consult with the Legal Counsel office for regulatory citations.
5-4. EMPHASIS ON TEXT. Emphasize only those words, phrases, and sentences that are really important. Use CAPS or underlining to show emphasis (in typeset material, this will print in italic and varies from the directives system which only uses caps for emphasis).
5-5. CAPITALIZATION. Follow the accepted standards for capitalization as given in the GPO Style Manual in the preparation of all text material for advisory circulars. In addition, capitalize the word "Change" when referring to a transmittal to an AC (even when not used with the Change number). This allows the reader to distinguish immediately the difference between the word "change" and the publication issuance entitled "Change." This practice is also followed in the Federal Aviation Regulations when referring to a "Part" so that the regulation will not be confused with the word "part" used so often to mean an aircraft part. When referring to an FAR part, capitalize the word "Part"
in the AC. (This is contrary to the usual practice of using the lower case for a shortened form reference.)
5-6. ABBREVIATIONS. Abbreviations are used to save space and avoid distracting the mind of the reader by a needless spelling out of repetitious words or phrases. The first time an abbreviation is used, it should follow in parentheses the spelled out term it is abbreviating. Abbreviations should be unquestionably clear to the reader.
a. Use In Parentheses. Abbreviate the parts of publications when used in parentheses (chap., sec., par., p., pp., fig., app., etc.).
b. Standard Usage. Refer to the section in the latest edition of the U.S. Government Printing Office (GPO) Style Manual for more detailed descriptions of proper uses for abbreviations and spacing (for example, "U.S." is closed up).
c. Technical Text Usage. Refer to the American National Standard Institute Style Manual for abbreviations,
signs, and symbols used in technical text and drawings.
5-7. QUOTATION MARKS. Use quotation marks for direct quotations, to give greater emphasis to a word or phrase, or to set off ordinary words used in an arbitrary way. Do not use quotation marks to enclose titles of chapters, sections, paragraphs of AC's. Do enclose title of other publications in quotes, or type in all caps, or print in italic. Refer to the paragraph on quotation marks in the punctuation chapter in the latest edition of the "GPO Style Manual" for more detailed examples.
5-8. COPYRIGHTS, CREDIT LINES, AND ACKNOWLEDGEMENTS.
a. Use of Copyrighted Material.
(1) If a writer decides to use material (usually art or photographs) already in print and copyrighted by a non-Government source, the writer must request permission in writing from the copyright owner (not the publisher) and the request must explain how the material is to be used by FAA. The letter must also request the copyright owner to state how he wishes credit or acknowledgment worded in the FAA publication using his material. The copyright owner's written permission to use his material must be retained in the case file. A copy of the copyright owner's written permission letter must be attached to FAA Form 1300-2, Clearance Record, for ABC-IOO review. If the owner does NOT grant permission, the writer must abide by that decision and seek another source for his material or prepare new original copy.
(2) Send the copyright owner a courtesy copy of the completed FAA publication even if he did not re-
33
quest a number of copies as a condition of his copyright use permission.
b. Use of Federal Government Material.
(1) FAA. AC's may be reproduced in part or in their entirety without permission from FAA.
(2) Other Agencies. Although Government publications cannot be copyrighted, the writer must advise another agency when he plans to use any part of that agency's publication (also as a protection, the material may be out of date or in need of correction). It is advisable to send the agency a courtesy copy of the FAA publication when completed.
c. FAA Credit Lines. Advisory circulars will not carry credit lines for FAA authors/writers, artists, illustrators, typographers, or editors.
d. Other Credit Lines. Do not place individual credit lines under each piece of copy to be acknowledged.
Rather, include them all in one statement in one place in the publication in the foreword or preface of a nonstandard AC or in a paragraph entitled, "Acknowledgments," "Credits" or "Introduction" in the body of the AC.
5-9. LEGENDS FOR TABLES AND FIGURES. Title illustrations as "FIGURES" (all caps) and number them consecutively throughout the text of a standard AC or number with the chapter or section number preceding the consecutive number as FIGURE 1-1, FIGURE 1-2, FIGURE 1-3, etc. (1-1 is FIGURE 1 in CHAPTER or SECTION 1, 1-2 is FIGURE 2 in CHAPTER 1, and 1-3 is FIGURE 3 in CHAPTER or SECTION 1). Place figure legends near (ABOVE OR BELOW) the corresponding illustration. Place figures near the text that mentions the figure. Table legends follow the same numbering system but place their legends ABOVE the table.
5-10. THRU 5-12. RESERVED.
(and 26)
35
8/23/95 1320.46A
CHAPTER 6. PRINTING AND DISTRIBUTION PROCEDURES
6-1. PREPARING THE PRINTING REQUISITION.
a. Use Fonn DOT F 1700.3, Printing, Binding, distribution, and Editorial Services Request, to order printing and distribution of an AC. The fonn is self-explanatory. (Figure 6-1 shows an illustration.) Questions or any uncertainties should be cleared with the local printing management organization of the preparing office. Order 1720.36, Procedures for Printing, Duplicating, and Copying, provides detailed instructions on printing procedures.
b. Attach to the printing requisition (DOT F 1700.3) the following items:
(1) Original and one copy (typewritten singlespaced if camera-ready, doubled-spaced typewritten copy if submitted for typesetting).
(2) Artwork (including cover art) if a separate cover is required.
(3) Special distribution lists or labels, if any.
c. Deliver the complete package to ABC-l 00.
d. ABC-I00 will sign the requisition in the "Cleared by" space on Fonn DOT F 1700.3 and prepare GPO Fonn 3668, Notification of Intent to Publish, when required. ABC-IOO will then assign a printing requisition number and forward to M-483 by special messenger for printing and distribution.
e. When printing is completed, the original copy (with negatives if a "for sale" AC) is returned to the DMO of the originating office for future use.
6-2. FREE ADVISORY CIRCULARS. Free AC's are ordered and stocked by M-45.3. M-45.3. fills AC requests from internal users and the general public. Prepare Fonn DOT F 1700.3 as instructed in paragraph 6-\. Deliver the printing requisition and the complete printing package to ABC-IOO who will sign the printing requisition for AC clearance and for printing and distribution review.
6-3. FOR SALE ADVISORY CIRCULARS. "For sale" AC's are ordered and stocked by the Superintendent of Documents, U.S. Government Printing Office (GPO). GPO detennines whether to sell a particular AC on advice of FAA and, in tum. will "ride" the FAA printing requisition. When an AC is to be sold by GPO, type in item 17 of the printing requisition (DOT F 1700.3), "Supt. Docs. To Ride For Sale Stock, GPO Fonn 3868 attached." If a single sale or subscription item, indicate this in item 17. ABC-IOO will prepare GPO Fonn 3868, Notification of Intent to Publish, and attach it to the printing request. (A completed copy of GPO Fonn 3868 is retained by ABC-IOO.) ABC-IOO will
then deliver the complete package to M-482. (See paragraph 4-lc for more infonnation.)
6-4. DISTRIBUTION AND FILING.
a. External Distribution. Materials issued within the AC system which are less than 32 PRINTED pages may be distributed to the public free of charge. The Office of Administrative Services and Property Management, Initial Distribution Section, M-483.1, distributes free AC's using mailing lists prepared on the basis of requests from the public. Separate mailing lists are maintained for each AC SPECIFIC SUBJECT NUMBER. AC 00-2, Advisory circular checklist, issued in the GENERAL (00) subject numbers is distributed to those who specifically request to be placed on the AC 00-2 mailing list. (See figure 3-1 for a more detailed description of general subject and specific subject numbers.)
(1) Subject Lists. Subject breakdown, by number, are listed in figure 3-1. A request for all AC's numbered in the 61 series will give the requestor all AC's numbered in that series. Likewise, a request for "all AC's numbered in the 60's" will give the requestor all AC's numbered 60 through 67. If a requestor ONLY wants all AC's relating to FAR Part 61, he must be certain to specify HAC 61" on his request. (See paragraph 3-8b.)
(2) Free AC Distribution (Exceptions). ABC- 100 should be consulted in detennining when an AC of 32 or more PRINTED pages may be distributed free of charge when such free distribution is requested by the office of primary responsibility. Use FAA Fonn 1300-2, Clearance Record, "Reason for Attached",. to annotate "Order
1320.46, paragraph 6-4a(2) Applies" when an AC of 32 or more PRINTED pages is to be distributed free to the public. The following are criteria which may be accepted as justification for free distribution of an AC of 32 or more
PRINTED pages.
(a) Speedy distribution is necessary for the AC to serve its purpose.
(b) The content of the AC must be widely distributed for effective program operations. (This criterion should usually be employed only in the case of safety promotional material, reminders about specific hazards, information on use of the National Airspace System (NAS), and others which probably would not be purchased by the public but whose wide dissemination is considered vital to the agency's responsibility for promoting safety.)
(c) The material provides benefits to the public at large rather than special benefits to particular recipients.
36
(3) "For Sale" AC Distribution. Materials issued within the AC system consisting of 32 or more PRINTED pages (16 sheets) should be offered for sale to the public, through the Superintendent of Documents, U.S.
Government Printing Office (GPO). (See paragraph 4-I(c) for more detailed information.)
(4) Restrictions on "For Sale" AC's. Advisory circulars sold by GPO shall not be distributed free to the public, except under exceptional circumstances where serious program requirements necessitate these publications be given to selected members of the public. Internal FAA distribution will be restricted on a "need-to-have" and "needto-know" basis for all "for sale" items. In these limited cases, the originating office must refer to the latest edition of Order 1720.18, FAA Distribution System, and select the recipients on an "FAA -ONL Y" or "FAA and GOVT' basis rather than AC category. This selection must be shown on the printing requisition (Form DOT F 1700.3) by proper distribution codes. "FAA -ONL Y" reaches FAA organizations only and "FAA and GOVT' reaches FAA and other government agencies.
(5) Making the AC Available. In those cases where the "for sale" AC is given a limited internal distribution and none to the public, issue an "Announcement of A vailability" under the same number as the sale AC. Tell the public what the AC is about, where and how to get it, the price, and the Superintendent of Documents stock number (SDSN). The SDSN and price of the AC will be supplied by GPO through AIT-400. (See paragraph 4-
Id(14) and figure 6-2.)
(6) Maintenance of Mailing Lists. JCP regulations require that the public segment of the AC mailing list be revised at least once a year in order to eliminate waste in Government funds caused by publications being improperly addressed or mailed to persons no longer desiring them. This process is done by the FAA through the Distribution Requirements Section, M-483.1. Those files which have been active during the year will be sent the annual canvass issue of AC 00-2, Advisory Circular Checklist. The canvass notice, included as part of the checklist, will request addressees to make any changes in requirements or address and return the canvass notice by the date specified on the notice. Those addressees not responding will be dropped from the list. FAA organizations shall keep their requirements current by submitting FAA Form 1100-1, Directory-Distribution Change Notice or Form DOT F.
1700.15, Distribution Requirements, in accordance with Order 1720.18, FAA Distribution System.
Continue reading ↓ 120 of 151 passages shown