Radar Vectors
FAA Notice Cancelled Issued Aug 16, 2010 AJW-3 2 pages Copy saved Nov 18, 2026

Notice N 8200.118 Flight Inspection of Wide Area Augmentation System (WAAS) RNAV Instrument Flight Procedures (FAA Order 8200.1C, Chapter 13)

This document is no longer current. Cancelled by 8200.1C. Check the official source before relying on it.

Official source ↗ Open PDF

Distribution: AJW-C/E/W/ 33; AFFSA; 1 ASF Initiated By: AJW-331 Air Traffic Technical Operations Aviation System Standards Flight Inspection Policy

NOTICE U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION N 8200.118

National Policy

Effective Date:

8/16/10

Cancellation Date:

FEDERAL AVIATION ADMINISTRATION N 8200.118

8/16/11

SUBJ: Flight Inspection of Wide Area Augmentation System (WAAS) RNAV Instrument Flight Procedures (Order 8200.1C, Chapter 13) 1. Purpose of This Notice. The Signal-to-Noise Ratio (SNR) tolerance for geostationary (GEO) satellites transmitting Wide Area Augmentation System(WAAS) GPS corrections is eliminated from the flight inspection/ validation tolerances. 2. Audience. The audience for this notice is the Air Traffic Technical Operations Eastern, Central, and Western Service Areas; Aviation System Standards Flight Inspection Operations Group offices and crewmembers; Air Force Flight Standards Agency (AFFSA); the 1st Aviation Standards Flight; the U.S. Army Aviation Center, Fort Rucker, Alabama; the Flight Standards Flight Technologies and Procedures Division; and users of FAA Order 8200.1, USSFIM. 3. Where Can I Find This Notice? Go to the Directives Management System (DMS) website: https://employees.faa.gov/tools_resources/orders_notices/ or the Aviations System Standards website: http://www.avn.faa.gov/index.asp?xml=fioo/notices 4. Background. RTCA DO-229x, Minimum Operations Performance Standards for Global Positioning System (GPS)/ WAAS Airborne Equipment addresses the WAAS avionics performance and satellite SNR. The avionics self-monitor the SNR to meet Technical Standard Order (TSO) C- 145/ C-146 certification. Due to the RTCA DO-229x addressing airborne equipment performance, a flight inspection tolerance for WAAS GEO SNR is not required. 5. Guidance. Please make the following pen and ink change to FAA Order 8200.1C, Chapter 13, Section 4, Paragraph 13.44, Tables 13-2 and 13-3: Delete Parameter/ Tolerance SNR-W/ ≥30dB/Hz.

N 8200.118 8/16/10

The above guidance will be incorporated in the next change to FAA Order 8200.1C. For additional information, please contact Dan Burdette, Flight Inspection Policy, 405-954-6164. Original signed by Thomas C. Accardi Director of Aviation System Standards