Radar Vectors
FAA Order Cancelled Issued Nov 5, 2004 AIR-200 368 pages Copy saved Nov 18, 2026

Order 8130.2F Airworthiness Certification of Aircraft and Related Products

This document is cancelled. Cancelled by 8130.2G. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (1 of 368 pages). Check the original, as some words may be misread.

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (LTD); A-FAC-0 (ALL); AMA-220 (50 copies); AMA-250 (10 copies); AFS-600 (3 copies); AVR-20 (ALL); AEU-100/200

Initiated By: AIR-200

CHANGE U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8130.2F

CHG 5 National Policy 1/15/2010

ORDER 8130.2F

SUBJ: Airworthiness Certification of Aircraft and Related Products

1. Purpose. This change encompasses policy revisions necessary to implement the recent regulatory changes to Title 14, Code of Federal Regulations (14 CFR) part 1, Definitions and Abbreviations, part 21, Certification Procedures for Products, Articles, and Parts, and part 45, Identification and Registration Marking, was published on October 16, 2009. Specifically, this change accommodates the 180-day compliance requirement for the associated changes to 14 CFR part 1; part 21, subparts H, I, L, and N; and, part 45, §§ 45.11 and 45.13. A subsequent change or revision to this order will be made at a later date to accommodate the 18-month compliance requirement associated with all other 14 CFR part or subpart changes introduced during that rulemaking activity.

2. Who This Change Affects. All Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; the Aviation System Standards office; the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; all aircraft certification offices; all manufacturing inspection district offices and manufacturing inspection satellite offices; all flight standards district offices; the Aircraft Certification Branch and Flight Standards Branch at the Federal Aviation Administration (FAA) Academy; all applicable representatives of the FAA; and all international field offices.

3. Explanation of Changes. This change:

a. Removes class I, II, and III export classification and replaces them with “products or articles.”

b. Removes the requirement of 100-hour inspections when exporting products.

c. Removes the word “only” from production under type certificate only.

d. Global changes of shall to must, Administrator to FAA.

e. Removes the word “newly” from newly overhauled.

4. Effective Date: This order is effective April 14, 2010.

5. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is canceled by a new directive.

ii

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated iii 11/5/2004 iii 11/5/2004 iv 11/5/2004 iv 1/15/2010 xi thru xiii 7/10/2006 xi thru xiii 1/15/2010 1 11/5/2004 1 1/15/2010 2 thru 5 4/18/2007 2 thru 5 1/15/2010 6 4/18/2007 6 4/18/2007 7 thru 8 11/5/2004 7 thru 8 1/15/2010 11 11/5/2004 11 11/5/2004 12 thru 18 11/5/2004 12 thru 18 1/15/2010 23 11/5/2004 23 1/15/2010 24 4/1/2005 24 1/15/2010 25 thru 33 11/5/2004 25 thru 33 1/15/2010 34 11/5/2004 34 11/5/2004 45 thru 46 11/5/2004 45 thru 46 1/15/2010 47 thru 48 4/18/2007 47 thru 48 1/15/2010 53 thru 64 4/18/2007 53 thru 64 1/15/2010 99 4/1/2005 99 1/15/2010 100 4/1/2005 100 4/1/2005 101 thru 103 11/5/2004 101 thru 103 1/15/2010 104 11/5/2004 104 11/5/2004 109 11/5/2004 109 11/5/2004 110 11/5/2004 110 1/15/2010 113 thru 114 7/10/2006 113 thru 114 1/15/2010 129 thru 130 7/10/2006 129 thru 130 1/15/2010 167 11/5/2004 167 1/15/2010 168 11/5/2004 168 11/5/2004 171 11/5/2004 171 1/15/2010 172 11/5/2004 172 11/5/2004 175 thru 176 11/5/2004 175 thru 176 1/15/2010 183 11/5/2004 183 11/5/2004 184 thru 186 11/5/2004 184 thru 186 1/15/2010 193 7/10/2006 193 1/15/2010 194 7/10/2006 194 7/10/2006 199 7/10/2006 199 7/10/2006 200 7/10/2006 200 1/15/2010 219 11/5/2004 219 11/5/2004 220 11/5/2004 220 1/15/2010 231 11/5/2004 231 11/5/2004 232 11/5/2004 232 1/15/2010 235 7/10/2006 235 7/10/2006 236 7/10/2006 236 1/15/2010 245 thru 256 11/5/2004 245 thru 256 1/15/2010 257 thru 258 9/30/2009 257 thru 258 1/15/2010 259 11/5/2004 259 11/5/2004

PAGE CHANGE CONTROL CHART

iii

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated 260 4/18/2007 260 1/15/2010 267 thru 268 11/5/2004 267 thru 268 1/15/2010 273 11/5/2004 273 11/5/2004 274 11/5/2004 274 1/15/2010 299 4/18/2007 299 1/15/2010 300 4/18/2007 300 4/18/2007 303 4/18/2007 303 1/15/2010 304 4/18/2007 304 4/18/2007 305 thru 306 4/1/2005 305 thru 306 1/15/2010 309 7/10/2006 309 7/10/2006 310 thru 311 7/10/2006 310 thru 311 1/15/2010 312 thru 313 9/30/2009 312 thru 313 1/15/2010 314 7/10/2006 314 1/15/2010 APPENDIX 2 1 4/18/2007 APPENDIX 2 1 1/15/2010 APPENDIX 2 2 11/5/2004 APPENDIX 2 2 1/15/2010 APPENDIX 2 3 4/18/2007 APPENDIX 2 3 1/15/2010 APPENDIX 2 4 4/18/2007 APPENDIX 2 4 4/18/2007

CHANGE U.S. DEPARTMENT OF TRANSPORTATION ORDER 8130.2F

CHANGE U.S. DEPARTMENT OF TRANSPORTATION ORDER 8130.2F

CHG 4

National Policy

9/30/2009

SUBJ: Airworthiness Certification of Aircraft and Related Products

1. Purpose. This change updates existing language related to experimental amateur-built aircraft airworthiness certification to be consistent with recommendations from the 2006 and 2008 Amateur-Built Aircraft Aviation Rulemaking Committee.

2. Who This Change Affects. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district offices and manufacturing inspection satellite offices; to flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the Federal Aviation Administration (FAA) Academy; to applicable representatives of the Administrator; and to all international field offices.

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is canceled by a new directive.

PAGE CHANGE CONTROL CHART

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated

vii 7/10/2006 vii 7/10/2006

viii 4/18/2007 viii 9/30/2009

ix 7/10/2006 ix 7/10/2006

x 7/10/2006 x 9/30/2009

149 thru 165 4/18/2007 149 thru 165-4 9/30/2009

166 11/5/2004 166 11/5/2004

221 11/5/2004 221 11/5/2004

222 11/5/2004 222 9/30/2009

227 11/5/2004 227 11/5/2004

228 thru 229 11/5/2004 228 thru 229 9/30/2009

230 11/5/2004 230 11/5/2004

244-3 7/10/2006 244-3 7/10/2006

8130.2F CHG 4

Remove Pages 244-4 257 thru 258 311 312 thru 313 314

Frank P. Paskiewiez Manager, Production and

Dated Insert Pages 7/10/2006 244-4 11/5/2004 257 thru 258 7/10/2006 311 7/10/2006 312 thru 313 7/10/2006 314

9/30/2009

Dated 9/30/2009 9/30/2009 7/10/2006 9/30/2009 7/10/2006

Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (LTD); A-FAC-0 (ALL); AMA-220 (50 copies); AMA-250 (10 copies); AFS-600 (3 copies); AVR-20 (ALL); AEU-100/200

Initiated By: AIR-200

CHANGE U.S. DEPARTMENT OF TRANSPORTATION

CHANGE U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER 8130.2F

CHG 3

National Policy

Effective Date:

April 18, 2007

SUBJ: Airworthiness Certification of Aircraft and Related Products

1. Purpose. This change is issued to—

a. Incorporate the provisions of changed § 21.183(d) and new §§ 21.6, 21.55, 21.120, 21.183(h), and 91.403(d) of Title 14, Code of Federal Regulations (14 CFR), based on Standard Airworthiness Certification of New Aircraft; Final Rule (71 FR 52250, September 1, 2006).

ORDER 8130.2F

b. Revise parts of the order related to standard airworthiness certification of new aircraft built from spare and surplus parts, used aircraft, and surplus military aircraft.

c. Provide policy for issuing a standard airworthiness certificate to a manned free balloon when the balloon envelope is the only component ordered from a manufacturer.

d. Provide policy for imported aircraft type certificated under a § 21.21 type certificate and manufactured under license by a bilateral country.

e. Update information related to the acceptance of repair data on used aeronautical products from bilateral partner aviation authorities.

f. Provide policy information to aviation safety inspectors who may issue an experimental certificate of airworthiness in the amateur-built category for type-certificated aircraft. Incorporation of this language is the result of the cancellation of the policy memorandum titled “Type Certificated Aircraft Converted to Amateur-Built,” dated December 20, 2006.

2. Who This Change Affects. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district offices and manufacturing inspection satellite offices; to flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the Federal Aviation Administration (FAA) Academy; to applicable representatives of the Administrator; and to all international field offices.

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is canceled by a new directive.

PAGE CHANGE CONTROL CHART

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated v 11/5/2004 v 4/18/2007 vi 11/5/2004 vi 11/5/2004 vii 7/10/2006 vii 7/10/2006 viii 7/10/2006 viii 4/18/2007 1 11/5/2004 1 11/5/2004 2 11/5/2004 2 4/18/2007 3 4/1/2005 3 4/18/2007 4 11/5/2004 4 4/18/2007 5 and 6 4/1/2005 5 and 6 4/18/2007 19 thru 21 11/5/2004 19 thru 21 4/18/2007 22 11/5/2004 22 11/5/2004 39 11/5/2004 39 11/5/2004 40 thru 42 11/5/2004 40 thru 42 4/18/2007 47 thru 53 11/5/2004 47 thru 53 4/18/2007 54 thru 63 4/1/2005 54 thru 63 4/18/2007 64 11/5/2004 64 4/18/2007 149 thru 160 11/5/2004 149 through 160 4/18/2007 161 7/10/2006 161 4/18/2007 162 thru 165 11/5/2004 162 thru 165 4/18/2007 166 11/5/2004 166 11/5/2004 259 11/5/2004 259 11/5/2004 260 11/5/2004 260 4/18/2007 299 thru 301 11/5/2004 299 thru 301 4/18/2007 302 7/10/2006 302 4/18/2007 303 through 304 11/5/2004 303 thru 304 4/18/2007 APPENDIX 2 1 11/5/2004 APPENDIX 2 1 4/18/2007 APPENDIX 2 2 11/5/2004 APPENDIX 2 2 11/5/2004 APPENDIX 2 3 thru 5 11/5/2004 APPENDIX 2 3 thru 5 4/18/2007

/s/ Frank P. Paskiewicz Manager, Production and

Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (LTD) Initiated By: AIR-200 A-FAC-0 (ALL); AMA-220 (50 copies); AMA-250 (10 copies) AFS-600 (3 copies); AVR-20 (ALL); AEU-100/200

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

FEDERAL AVIATION ADMINISTRATION

8130.2F CHG 2

7/10/2006

SUBJ: AIRWORTHINESS CERTIFICATION OF AIRCRAFT AND RELATED PRODUCTS

1. PURPOSE. This change is issued to—

a. Revise parts of the order related to light-sport aircraft based on comments from the field, industry, and light-sport program office, and light-sport program input from the designated airworthiness representative classes.

SUBJ: AIRWORTHINESS CERTIFICATION OF AIRCRAFT AND RELATED PRODUCTS

b. Update references to part 39 of Title 14, Code of Federal Regulations (14 CFR) related to special flight permits.

c. Provide guidance in support of field aviation safety inspectors.

2. DISTRIBUTION. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district offices and manufacturing inspection satellite offices; to flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the Federal Aviation Administration (FAA) Academy; to the Brussels Aircraft Certification Branch and Flight Standards Staff; to applicable representatives of the Administrator; and to all international field offices.

3. EXPLANATION OF CHANGES. Changes to paragraphs 88, 121, 122, 123, 125, 126, 127, 131, 132, 136, 141, 142, 143, 144, 153, 267, 269, 270, and 273, and figures 4-21, 4-22, 4-24, 4-25, 4-26, 4-27, 4-28, 4-29, and 4-30 were made to clarify, correct, and incorporate information related to light-sport aircraft. Changes to paragraph 191(g) and (h) were made to update references to certain sections of part 39 of Title 14, Code of Federal Regulations and to incorporate § 39.23 guidance as it relates to special flight permits. Changes to paragraph 194(c) were made to address the FAA’s authority to authorize personnel or organizations other than the FAA to inspect and support the issuance of a special flight permit as it relates to damaged aircraft.

4. DISPOSITION OF TRANSMITTAL. Retain this transmittal sheet until the directive is canceled by a new directive.

5. PAGE CONTROL CHART. See attached page control chart.

PAGE CONTROL CHART

PAGE CONTROL CHART

Remove Pages Dated Insert Pages Dated vii 4/1/2005 vii 7/10/2006 viii through ix 11/5/2004 viii through ix 7/10/2006 x 4/1/2005 x 7/10/2006 xiii 11/5/2004 xiii 7/10/2006 97 11/5/2004 97 7/10/2006 98 11/5/2004 98 11/5/2004 111 11/5/2004 111 11/5/2004 112 through 125 4/1/2005 112 through 125 7/10/2006 126 through 127 4/1/2005 126 through 127 4/1/2005 128 through 134 11/5/2004 128 through 134 7/10/2006 135 through 138 4/1/2005 135 through 138 7/10/2006 139 4/1/2005 139 4/1/2005 140 4/1/2005 140 7/10/2006 141 4/1/2005 141 4/1/2005 142 through 147 4/1/2005 142 through 147 7/10/2006 148 4/1/2005 148 4/1/2005 161 11/5/2004 161 7/10/2006 162 11/5/2004 162 11/5/2004 191 11/5/2004 191 11/5/2004 192 through 197 11/5/2004 192 through 197 7/10/2006 198 4/1/2005 198 7/10/2006 199 through 202 11/5/2004 199 through 202 7/10/2006 233 4/1/2005 233 7/10/2006 234 11/5/2004 234 7/10/2006 235 through 237 4/1/2005 235 through 237 7/10/2006 238 4/1/2005 238 4/1/2005 239 4/1/2005 239 7/10/2006 240 11/5/2004 240 7/10/2006 241 through 244 4/1/2005 241 through 244-4 7/10/2006 297 11/5/2004 297 7/10/2006 298 11/5/2004 298 11/5/2004 301 11/5/2004 301 11/5/2004 302 11/5/2005 302 7/10/2006

PAGE CONTROL CHART (CONTINUED)

PAGE CONTROL CHART (CONTINUED)

Remove Pages Dated Insert Pages Dated 307 through 312 4/1/2005 307 through 314 7/10/2006 313 11/5/2004 315 7/10/2006

/s/ Frank P. Paskiewicz Manager, Production and

Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (LTD) Initiated By: AIR-200 A-FAC-0 (ALL); AMA-220 (50 copies); AMA-250 (10 copies) AFS-600 (3 copies); AVR-20 (ALL); AEU-100/200; A-FDR-1D

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

8130.2F CHG 1

4/1/2005

SUBJ: AIRWORTHINESS CERTIFICATION OF AIRCRAFT AND RELATED PRODUCTS

1. PURPOSE. This change is issued to—

a. Revise parts of the order related to light-sport aircraft based on comments from the field and industry, and light-sport program input from the prototype amateur-built designated airworthiness representative class.

SUBJ: AIRWORTHINESS CERTIFICATION OF AIRCRAFT AND RELATED PRODUCTS

b. Incorporate relevant information pertaining to the Vision 100—Century of Aviation Reauthorization Act (the Act), passed December 12, 2003.

2. DISTRIBUTION. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district offices and manufacturing inspection satellite offices; to flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the FAA Academy; to the Brussels Aircraft Certification Staff and Flight Standards Staff; to applicable representatives of the Administrator; and to all international field offices.

3. EXPLANATION OF CHANGES. Changes to paragraphs 7, 8, 36, 89, 121, 122, 123, 125, 126, 141, 142, 143, 144, 197, 267, and 269, and figures 4-21, 4-23, 4-24, 4-25, 4-26, 4-27, and 4-28 were made to clarify, correct, and incorporate information related to light-sport aircraft. Changes to paragraph 63 were made to incorporate information related to the Act.

4. DISPOSITION OF TRANSMITTAL. Retain this transmittal sheet until the directive is canceled by a new directive.

5. PAGE CONTROL CHART. See attached page control chart.

PAGE CONTROL CHART

PAGE CONTROL CHART

Remove Pages Dated Insert Pages Dated vii 11/5/2004 vii 4/1/2005 viii through ix 11/5/2004 viii through ix 11/5/2004 x 11/5/2004 x 4/1/2005 3 11/5/2004 3 4/1/2005 4 11/5/2004 4 11/5/2004 5 through 6 11/5/2004 5 through 6 4/1/2005 23 11/5/2004 23 11/5/2004 24 11/5/2004 24 4/1/2005 53 11/5/2004 53 11/5/2004 54 through 55 11/5/2004 54 through 55 4/1/2005 56 through 63 11/5/2004 56 through 63 4/1/2005 64 11/5/2004 64 11/5/2004 99 through 100 11/5/2004 99 through 100 4/1/2005 111 11/5/2004 111 11/5/2004 112 through 127 11/5/2004 112 through 127 4/1/2005 128 11/5/2004 128 11/5/2004 135 through 148 11/5/2004 135 through 148 4/1/2005 197 11/5/2004 197 11/5/2004 198 11/5/2004 198 4/1/2005 233 11/5/2004 233 4/1/2005 234 11/5/2004 234 11/5/2004 235 11/5/2004 235 11/5/2004 236 11/5/2004 236 4/1/2005 237 through 239 11/5/2004 237 through 239 4/1/2005 240 11/5/2004 240 11/5/2004 241 through 244 11/5/2004 241 through 244 4/1/2005 305 through 312 11/5/2004 305 through 312 4/1/2005

/s/ Frank P. Paskiewicz Manager, Production and

Airworthiness Division, AIR-200

Distribution: A-W (IR/FS/VN) -3; A-X (CD/FS) -3; A-FFS-0 (LTD) A-FAC-0 (ALL); AMA-220 (50 copies); AMA-250 (10 copies) AFS-600 (3 copies); AVR-20 (ALL); AEU-100/200

Initiated by: AIR-200

ORDER

8130.2F

AIRWORTHINESS CERTIFICATION OF AIRCRAFT AND RELATED PRODUCTS

November 5, 2004

DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

FEDERAL AVIATION ADMINISTRATION

RECORD OF CHANGES DIRECTIVE NO. 8130.2F

CHANGE

TO BASIC

SUPPLEMENTS

OPTIONAL

CHANGE

TO BASIC

SUPPLEMENTS OPTIONAL

CHG 1 4/1/2005 CHG 2 7/10/2006 CHG 3 4/18/2007 CHG 4 9/302009 CHG 5 1/15/2010

FAA Form 1320-5 (6-80) USE PREVIOUS EDITION

11/5/2004 8130.2F

SUPPLEMENTS OPTIONAL

Page i (and ii)

FOREWORD

This order establishes procedures for accomplishing original and recurrent airworthiness certification of aircraft and related products. The procedures contained in this order apply to Federal Aviation Administration (FAA) manufacturing aviation safety inspectors (ASI), to FAA airworthiness ASIs, and to private persons or organizations delegated authority to issue airworthiness certificates and related approvals.

On July 27, 2004, the FAA published Certification of Aircraft and Airmen for the Operation of Light-Sport Aircraft; Final Rule, effective September 1, 2004. This order has been revised to explain the new regulations of part 21 of Title 14, Code of Federal Regulations, regarding addition of the light-sport aircraft category and light-sport experimental aircraft.

In addition, this order has been reformatted to meet certain guidelines in FAA Order 1320.46C, Advisory Circular System, and FAA Order 1000.36, FAA Writing Standards. Therefore, this edition of FAA Order 8130.2F, Airworthiness Certification of Aircraft and Related Products, replaces the guidance and procedures found in Order 8130.2E.

Suggestions for improvement of this order may be submitted using FAA Form 1320-19, Directive Feedback Information.

/s/ Frank P. Paskiewicz Manager, Production and

Airworthiness Division, AIR-200

11/5/2004 8130.2F

Page iii

TABLE OF CONTENTS

TABLE OF CONTENTS

CHAPTER 1. INTRODUCTION

Paragraph Page

1. Purpose … 1 2. Distribution … 1 3. Cancellation … 1 4. Authority To Change This Order … 1 5. Deviations … 1 6. Forms … 1 7. Acronyms … 1 8. Definitions … 3 9. Interpretation of the Term “Airworthy” for U.S. Type-Certificated Aircraft … 7 10. Information Currency … 7 11. Records Management … 7 12. Reserved for Future Changes … 7

CHAPTER 2. GENERAL POLICIES AND PROCEDURES

CHAPTER 2. GENERAL POLICIES AND PROCEDURES

SECTION 1. GENERAL INFORMATION 13. Representatives of the FAA Authorized To Issue Airworthiness Certificates and Related Approvals … 8 14. Responsibilities of FAA Aviation Safety Inspectors and Designees … 8 15. Possession and Display of Airworthiness Certificates … 9 16. Aircraft Registration … 9 17. Aircraft Nationality, Registration Marks, Reservation of Special Registration Numbers, and Display of Registration Marks … 10 18. Display of Nationality and Registration Marks on Antique and Antique Replica Aircraft … 11 19. Original and Replacement Identification Plates … 12 20. Public Aircraft … 13 21. Aircraft Being Removed From a Continuous Maintenance System … 14 22. Operation of Civil Aircraft With a Door Open or Removed for Parachuting, Skydiving, or Other Special Operations … 15 23. Banner Towing … 16 24. Reserved for Future Changes … 16

SECTION 2. AIRWORTHINESS CERTIFICATES AND CERTIFICATIONS

SECTION 2. AIRWORTHINESS CERTIFICATES AND CERTIFICATIONS

25. General … 17 26. Classification and Category of Airworthiness Certificates … 17 27. Replacement, Exchange, or Amendment of Airworthiness Certificates … 17 28. Surrendered Airworthiness Certificate … 19

Page iv

Paragraph Page

29. Aircraft Model Change … 19 30. Safeguarding FAA Airworthiness Certificates … 20 31. Recording of Conformity Inspections … 20 32. Airworthiness Certification of Manned Free Balloons … 20 33. Reserved for Future Changes … 21

SECTION 3. INITIAL OR SUBSEQUENT ISSUANCE OF AIRWORTHINESS CERTIFICATES (ORIGINAL/RECURRENT) OR RELATED APPROVALS

34. General … 22 35. Airworthiness Certification … 22 36. Exceptions … 24 37. Recording of Conformity Inspections … 24 38. Eligibility and Evaluation of U.S. Military Surplus Flight Safety-Critical Aircraft Parts, Engines, and Propellers … 24 39. Reserved for Future Changes … 33 Figure 2-1. Sample Aeronautical Center Form 8050-64, Assignment of Special Registration Numbers … 34 Figure 2-2. Sample Response Letter Regarding Identification Plates … 35 Figure 2-3. Sample Limitations for the Operation of an Aircraft With a Door Removed … 37 Figure 2-4. Sample Form 8100-1, Conformity Inspection Record … 39

CHAPTER 3. STANDARD AIRWORTHINESS CERTIFICATION

CHAPTER 3. STANDARD AIRWORTHINESS CERTIFICATION

SECTION 1. GENERAL INFORMATION

40. General … 40 41. Standard Airworthiness Certificate … 40 42. Application for Airworthiness Certificate … 40 43. Statement of Conformity … 41 44. Use of Parts Catalogs and Maintenance Manuals … 41 45. Basic Eligibility Requirements … 42 46. Certification Procedures … 42 47.-48. Reserved for Future Changes … 44

SECTION 1. GENERAL INFORMATION

SECTION 2. NEW AIRCRAFT 49. General … 45 50. Use of Designees … 45 51. Certification Procedures … 45 52. Aircraft Manufactured Under a TC (Without an FAA Production Approval) … 45 53. Aircraft Manufactured Under an APIS … 46 54. Aircraft Manufactured Under a PC … 46 55. Aircraft Manufactured Under ODA … 46 56. Airworthiness Certification of Very Light Aircraft … 47

Page v

Paragraph Page 57. Aircraft Manufactured in a Bilateral Country … 47 57-1. New Aircraft Manufactured Under the Provisions of § 21.6(b) … 47

SECTION 3. USED AIRCRAFT AND SURPLUS AIRCRAFT OF THE U.S. ARMED FORCES

SECTION 3. USED AIRCRAFT AND SURPLUS AIRCRAFT OF THE U.S. ARMED FORCES

58. General … 53 59. Certification Procedures … 53 60. Conformity Determination … 54 61. Flight Testing … 56 62. Issuance of Standard Airworthiness Certificates Under § 21.183(d)— Used Aircraft … 56 63. Reserved for Future Changes … 60 64. Screening of Surplus Military Aircraft … 60 65. Conformity Certificate—Military Aircraft … 61 66. Issuance of Standard Airworthiness Certificates, Surplus Military Aircraft … 62 67. Certification Requirements (Applicant) … 62 68. Certification Procedures … 63 69. Examples of Forms … 64 70.-85. Reserved for Future Changes … 64 Figure 3-1. Sample Form 8100-2, Standard Airworthiness Certificate, New Aircraft … 65 Figure 3-2. Sample Form 8100-2, Standard Airworthiness Certificate, Spare and Surplus Parts … 66 Figure 3-3. Sample Form 8130-6, Application for Airworthiness Certificate, VLA Under § 21.183(a) … 67 Figure 3-4. Sample Form 8100-2, Standard Airworthiness Certificate, VLA Under § 21.183(a) … 69 Figure 3-5. Sample Form 8130-6, Application for Airworthiness Certificate, JAR/VLA Under § 21.183(c) … 71 Figure 3-6.

Sample Form 8100-2, Standard Airworthiness Certificate, JAR/VLA Under § 21.183(c) … 73 Figure 3-7. Sample Form 8130-11, Checklist and Inspection Record, Aircraft Built From Spare and Surplus Parts … 75 Figure 3-8. Sample Form 8130-9, Statement of Conformity, Aircraft Built From Spare and Surplus Parts … 83 Figure 3-9. Sample Form 8130-10, Surplus Military Aircraft Inspection Record, No Reasonable Potential for Standard Certification … 84 Figure 3-10. Sample Form 8130-10, Surplus Military Aircraft Inspection Record, Reasonable Potential for Standard Certification … 85 Figure 3-11. Sample Form 8130-2, Conformity Certificate— Military Aircraft … 86 Figure 3-12. Sample Form 8100-2, Standard Airworthiness Certificate, Surplus Military Aircraft … 87

*

*

8130.2F 11/5/2004

Page vi

Paragraph Page

Figure 3-13. Sample Form 8130-6, Application for Airworthiness Certificate, Used Aircraft, No Previous U.S. Airworthiness Certificate … 89 Figure 3-14. Sample Form 8130-6, Application for Airworthiness Certificate, New Aircraft Produced Under an APIS or PC … 91 Figure 3-15. Sample Form 8130-6, Application for Airworthiness Certificate, Surplus Military Aircraft … 93 Figure 3-16. Sample Form 8130-6, Application for Airworthiness Certificate, Aircraft Built From Spare and Surplus Parts … 95

CHAPTER 4. SPECIAL AIRWORTHINESS CERTIFICATION

CHAPTER 4. SPECIAL AIRWORTHINESS CERTIFICATION

SECTION 1. GENERAL INFORMATION

86. General … 97 87. Application for Airworthiness Certificate … 97 88. Certification Procedures … 97 89. Special Airworthiness Certificates … 99

SECTION 2. RESTRICTED AIRWORTHINESS CERTIFICATION

90. General … 101 91. Certification Procedures … 101 92. Eligibility … 101 93. Special Purpose Operations … 102 94. Statement of Conformity … 102 95. Operating Limitations … 102 96. Agricultural Aircraft … 103 97. Airworthiness Certificate … 103 98. Display of Marks (Restricted) … 104 99.-100. Reserved for Future Changes … 104

SECTION 3. MULTIPLE AIRWORTHINESS CERTIFICATES

SECTION 3. MULTIPLE AIRWORTHINESS CERTIFICATES

101. General … 105 102. Certification Procedures … 105 103. Eligibility … 105 104. Special Purpose Operations … 106 105. Airworthiness Certificates … 106 106. Operating Limitations … 106 107. Operating With Multiple Airworthiness Certificates, Standard and Restricted … 106 108. Display of Marks (Restricted or Limited) … 107 109.-111. Reserved for Future Changes … 107

Page vii

Paragraph Page

SECTION 4. LIMITED AIRWORTHINESS CERTIFICATION

SECTION 4. LIMITED AIRWORTHINESS CERTIFICATION

112. General … 108 113. Certification Procedures … 108 114. Eligibility … 108 115. Operating Limitations … 108 116. Display of Marks (Limited) … 108 117. Aircraft Issued Limited Category Type Certificates … 109

SECTION 5. PRIMARY CATEGORY AIRCRAFT AIRWORTHINESS CERTIFICATIONS

SECTION 5. PRIMARY CATEGORY AIRCRAFT AIRWORTHINESS CERTIFICATIONS

118. General … 110 119. Certification Procedures … 111 120. Reserved for Future Changes … 111

SECTION 6. LIGHT-SPORT CATEGORY AIRCRAFT AIRWORTHINESS CERTIFICATIONS

121. General Information … 112 122. Certification Procedures … 116 123. Production Flight Testing … 120 * 124. Flight Test Areas … 121 125. Special Flight Permit for Flight Testing Light-Sport Aircraft Category Operating Limitations … 122 126. Issuance of Light-Sport Category Aircraft Operating Limitations … 123 127. Light-Sport Aircraft Statement of Compliance … 125 128.-130. Reserved for Future Changes … 125 *

SECTION 7. GENERAL EXPERIMENTAL AIRWORTHINESS CERTIFICATIONS

SECTION 7. GENERAL EXPERIMENTAL AIRWORTHINESS CERTIFICATIONS

131. General … 128 132. Eligibility … 129 133. Demilitarization of Former Military Aircraft … 130 134. Aircraft Equipped With Ejection Seats, Ballistic Parachutes, or Jettisonable Stores … 131 135. Flight Test Areas … 132 136. Operating Outside Flight Test Areas … 133 137.-140. Reserved for Future Changes … 134

SECTION 8. EXPERIMENTAL LIGHT-SPORT AIRCRAFT AIRWORTHINESS CERTIFICATIONS

SECTION 8. EXPERIMENTAL LIGHT-SPORT AIRCRAFT AIRWORTHINESS CERTIFICATIONS

141. General … 135 142. Certification Procedures … 139 * 143. Flight Test Areas … 141 *

Page viii

Paragraph Page

144. Issuance of Experimental Light-Sport Operating Limitations … 143 145. Reserved for Future Changes … 147

SECTION 9. EXPERIMENTAL AMATEUR-BUILT AIRWORTHINESS CERTIFICATIONS

SECTION 9. EXPERIMENTAL AMATEUR-BUILT AIRWORTHINESS CERTIFICATIONS

146. General … 149 * 147. Eligibility … 149 148. Determination of Major Portion … 151 149. Design and Construction … 152 150. FAA Evaluation of Amateur-Built Aircraft Kits … 155 151. Advising Applicants … 156 152. Certification Procedures … 158 153. Flight Test Areas … 163 154. Issuance of Experimental Amateur-Built Operating Limitations … 164 *

SECTION 10. CERTIFICATION AND OPERATION OF AIRCRAFT UNDER THE EXPERIMENTAL PURPOSE(S) OF EXHIBITION AND AIR RACING

155. General … 166 156. Former Military Aircraft … 167 157. Brokering … 168 158. Groups of Aircraft … 168 159. Special Certification Requirements … 170 160. Certification Procedures … 172 161. Issuance of Experimental Exhibition and Air Racing Operating Limitations … 172 162. Reserved for Future Changes … 179

SECTION 11. CERTIFICATION AND OPERATION OF AIRCRAFT UNDER THE EXPERIMENTAL PURPOSE(S) OF RESEARCH AND DEVELOPMENT, SHOWING COMPLIANCE WITH REGULATIONS, CREW TRAINING, MARKET SURVEYS, AND OPERATING KIT-BUILT AIRCRAFT

163. General … 180 164. Special Certification Requirements … 181 165. PC/APIS Holder and Modifier Experimental Operating Procedure … 181 166. Issuance of Experimental Research and Development, Showing Compliance With Regulations, Crew Training, Market Surveys, and Operating Kit-Built Aircraft Operating Limitations … 182 167.-169. Reserved for Future Changes … 188

SECTION 12. PROVISIONAL AIRWORTHINESS CERTIFICATION

SECTION 12. PROVISIONAL AIRWORTHINESS CERTIFICATION

170. General … 189 171. Eligibility … 189

Page ix

Paragraph Page

172. Special Purpose Operations … 189 173. Statement of Conformity … 189 174. Certification Procedures … 189 175. Special Airworthiness Certificate, Form 8130-7 … 189 176. Operating Limitations … 190 177.-190. Reserved for Future Changes … 190

SECTION 13. SPECIAL FLIGHT PERMITS

SECTION 13. SPECIAL FLIGHT PERMITS

191. General … 191 * 192. Purposes … 193 * 193. Application and Issuance (General) … 193 * 194. Aircraft Inspections … 194 * 195. Special Operating Limitations … 194 * 196. Special Flight Permit for Operation of Overweight Aircraft … 196 * 197. Special Flight Permit for Production Flight Testing … 198 198. Special Flight Permit for Conducting Customer Demonstration Flights … 199 199. Special Flight Permit for Certain Large Aircraft for Which 14 CFR Part 125, Certification and Operations: Airplanes Having a Seating Capacity of 20 or More Passengers or a Maximum * Payload Capacity of 6,000 Pounds or More, Is Not Applicable … 201 * 200.-213. Reserved for Future Changes … 202 Figure 4-1. Sample Form 8130-7, Special Airworthiness Certificate ....203 Figure 4-2. Sample Form 8130-7, Special Airworthiness Certificate for Restricted Category Aircraft Certificated Under § 21.25(b)(7) … 204 Figure 4-3. Sample Form 8130-6, Airworthiness Application for Primary Category Aircraft Certificated Under § 21.184(a) … 205 Figure 4-4.

Sample Form 8130-7, Special Airworthiness Certificate for Primary Category Aircraft Certificated Under § 21.184(a) … 207 Figure 4-5. Sample Form 8130-6, Airworthiness Application for Primary Category Aircraft Certificated Under § 21.184(b) … 209 Figure 4-6. Sample Form 8130-7, Special Airworthiness Certificate for Primary Category Aircraft Certificated Under § 21.184(b) … 211 Figure 4-7. Sample Form 8130-6, Airworthiness Application for Primary Category Aircraft Certificated Under § 21.184(c) … 213 Figure 4-8. Sample Form 8130-7, Special Airworthiness Certificate for Primary Category Aircraft Certificated Under § 21.184(c) … 215 Figure 4-9. Sample Operating Limitations for Primary Category Aircraft Certificated Under § 21.184(c) … 216 Figure 4-10. Sample Form 8130-6, Airworthiness Application for Primary Category Aircraft Certificated Under § 21.184(c) … 217 Figure 4-11. Sample Form 8130-7, Special Airworthiness Certificate for Primary Category Aircraft Certificated Under § 21.184(c) … 219

Page x

Paragraph Page

Figure 4-12. Sample Form 8130-7, Special Airworthiness Certificate and Operating Limitations for Primary Category Aircraft Certificated Under § 21.184(c) … 220 Figure 4-13. Sample Program Letter, Research and Development/Showing Compliance Applicant Program Letter Special Airworthiness Certificate … 221 Figure 4-14. Sample Form 8130-12, Eligibility Statement, Amateur-Built Aircraft … 222 Figure 4-15. Sample Form 8000-38, Fabrication/Assembly Operation Checklist … 223 * Figure 4-16. Reserved … 228 Figure 4-17. Reserved … 229 * Figure 4-18. Sample Unlimited Form 8130-7 … 230 Figure 4-19. Sample Form 8130-7, Special Flight Permit … 231 Figure 4-20. Sample Form 337, Major Repair and Alteration … 232 Figure 4-21. Sample Form 8130-6, Airworthiness Application for Special Flight Permit Production Flight Test Certificated Under § 21.190 … 233 Figure 4-22. Sample Form 8130-7, Special Flight Permit LSA … 235 Figure 4-23. Sample Form 8130-7, Special Flight Permit Operating Limitations for LSA Category Production Flight Testing … 236 Figure 4-24.

Sample Form 8130-6, Airworthiness Application for LSA Category Aircraft Certificated Under § 21.190 … 237 Figure 4-25. Sample Form 8130-6, Airworthiness Application for Experimental Certificate for Operating LSA (Experimental Kit LSA) Under § 21.191(i)(1) … 239 Figure 4-26. Sample Form 8130-7, Special Airworthiness Certificate for LSA Category Aircraft Certificated Under § 21.190 … 241 Figure 4-27. Sample Form 8130-6, Airworthiness Application for Special Experimental Purpose Operating LSA Certificated Under § 21.191 … 243 Figure 4-28. Sample Form 8130-7, Special Airworthiness Certificate for Experimental Operation LSA Certificated Under § 21.191 … 244-1 Figure 4-29. Sample Form 8130-15, Light-Sport Aircraft Statement of Compliance … 244-2 Figure 4-30. Sample Form 8130-15, Light-Sport Kit-Built Aircraft Statement of Compliance … 244-3 * Figure 4-31. Use of Prior Policy … 244-4 *

Page xi

CHAPTER 5. EXPORT APPROVAL PROCEDURES

CHAPTER 5. EXPORT APPROVAL PROCEDURES

SECTION 1. GENERAL INFORMATION

214. General … 245 215.-217. Reserved for Future Changes … 246

SECTION 2. EXPORT APPROVALS

218. Section 21.323, Eligibility … 247 219. Section 21.325, Export Airworthiness Approvals … 247 220. Section 21.327, Application … 248 221. Issuance of Form 8130-4, Export Certificate of Airworthiness, for Aircraft … 248 222. Issuance of Form 8130-3, Airworthiness Approval Tag, for Engines and Propellers … 249 223. Issuance of Form 8130-3, Airworthiness Approval Tag, for Articles … 249 224. Responsibilities of Exporters … 249 225. Special Export Airworthiness Approval for Aircraft … 250 226. Reserved for Future Changes … 250 227. Determination of “New” and “Used” Products … 251 228. Preparation of Export Certificates of Airworthiness … 251 229. Approval of Modifications … 253 230. Export Certificate Number Assignment Card … 254 231. Routing and Processing of Export Files … 254 232. Issuance of Export Certificates of Airworthiness for Aircraft Type-Certificated in Multiple Categories … 254 233. Issuance of Export Certificates of Airworthiness for Restricted Category Aircraft … 255 234. Controversial Information … 255 235.-237. Reserved for Future Changes … 255 Figure 5-1. Sample Form 8130-4, Export Certificate of Airworthiness … 256 Figure 5-2. Sample Form 8130-1, Application for Export Airworthiness Approval … 257 Figure 5-3. Aeronautical Center Form 8050-72, Export Certificate Number Assignment Card … 259

CHAPTER 6. IMPORT PROCEDURES

CHAPTER 6. IMPORT PROCEDURES

SECTION 1. GENERAL INFORMATION

238. General … 260 239.-240. Reserved for Future Changes … 261

Page xii

Paragraph Page

SECTION 2. IMPORT AIRCRAFT

241. Requirements for U.S. Airworthiness Certification … 262 242. Application … 263 243. Airworthiness Determination … 263 244. Airworthiness Certification of Aircraft With Mandatory Continuing Airworthiness Information … 265 245. Certification Procedures … 266 246.-247. Reserved for Future Changes … 266

SECTION 3. AIRCRAFT ENGINES, PROPELLERS, AND ARTICLES

SECTION 3. AIRCRAFT ENGINES, PROPELLERS, AND ARTICLES

248. Airworthiness Determination … 267 249. Identification and Marking … 268 250. Return to Service … 268 251. Special Maintenance Records Consideration … 268 252.-253. Reserved for Future Changes … 269

CHAPTER 7. SPECIAL FLIGHT AUTHORIZATIONS FOR NON-U.S.-REGISTERED CIVIL AIRCRAFT

CHAPTER 7. SPECIAL FLIGHT AUTHORIZATIONS FOR NON-U.S.-REGISTERED CIVIL AIRCRAFT

254. General … 270 255. Eligibility … 270 256. Blanket Special Flight Authorizations … 271 257. Application … 271 258. Issuance … 273 259. Duration … 274 260. Operating Limitations … 274 261. Special Flight Authorizations for Operation of Canadian-Registered Amateur-Built Aircraft in the United States … 278 262.-265. Reserved for Future Changes … 278 Figure 7-1. Sample Special Flight Authorization for the Flight of an Aircraft to a Place Where Repairs or Alterations Are To Be Made … 279 Figure 7-2. Sample Special Flight Authorization for the Flight of an Aircraft to a New Country of Registry (This Format Is Generally Applicable to a Single Aircraft Authorization for Ferry Flights) … 281 Figure 7-3. Sample Special Flight Authorization for the Purpose of Flight Testing … 283 Figure 7-4. Sample Blanket Special Flight Authorization for Customer Crew Training … 285 Figure 7-5. Sample Special Flight Authorization for Export Delivery … 287 Figure 7-6. Sample Blanket Special Flight Authorization for Delivering Aircraft for the Purpose of Export Delivery … 289

Page xiii

Paragraph Page

Figure 7-7. Sample Special Flight Authorization for the Purpose of Demonstration … 291 Figure 7-8. Sample Special Flight Authorization for Canadian-Registered Amateur-Built Aircraft (Example: Authorization for the Purpose of Attending an Airshow) … 293 Figure 7-9. Sample Blanket Special Flight Authorization for Glider Meet … 295

CHAPTER 8. PROCESSING FORMS, REPORTS, AND CERTIFICATION FILES

CHAPTER 8. PROCESSING FORMS, REPORTS, AND CERTIFICATION FILES

Paragraph Page

266. General … 297 267. Application for Airworthiness Certificate … 297 268. Completion of Form 8100-2 … 305 269. Completion of Form 8130-7 … 306 270. Instructions for Reviewing a Completed Form 8130-15 … 308 271. Completion of Form 8130-4 … 310 272. Completion of Form 8130-1 … 310 273. Examination, Review, and Routing of Certification Files … 313 274.-280. Reserved for Future Changes … 314 Figure 8-1. Forms Listing and Availability … 315

APPENDIX 1. ISSUANCE OF U.S. STANDARD AIRWORTHINESS CERTIFICATES FOR NEW AIRCRAFT MANUFACTURED OUTSIDE THE UNITED STATES

1. Purpose … 1 2. Applicability … 1 3. Procedure … 1 4. Administrative Requirements … 7

APPENDIX 2. ACCEPTANCE OF AN EXPORT CERTIFICATE OF AIRWORTHINESS FOR USED AIRCRAFT UNDER A BILATERAL AGREEMENT

1. Purpose … 1 2. Responsibilities of ASIs and Designees … 1 3. One Hundred-Hour Inspection … 1 4. Special Bilateral Provisions … 2 Table A2-1. Bilateral Agreements that Provide for Acceptance of an Export Certificate of Airworthiness for Used Aircraft … 4

CHAPTER 1. INTRODUCTION

CHAPTER 1. INTRODUCTION

1. PURPOSE. This order establishes procedures for accomplishing original and recurrent airworthiness certification of aircraft and related products. The procedures contained in this order apply to Federal Aviation Administration (FAA) manufacturing aviation safety inspectors (ASI), to FAA airworthiness ASIs, and to private persons or organizations delegated authority to issue airworthiness certificates and related approvals.

2. DISTRIBUTION. This order is distributed to the Washington headquarters branch levels of the Aircraft Certification Service, Flight Standards Service, and the Regulatory Support Division; to the Aviation System Standards office; to the branch level in the Aircraft Certification Service directorates and regional Flight Standards Service divisions; to all aircraft certification offices; to all manufacturing inspection district offices and manufacturing inspection satellite offices; to all flight standards district offices; to the Aircraft Certification Branch and Flight Standards Branch at the FAA Academy; to the Brussels Aircraft Certification Division and Flight Standards staff; to applicable representatives of the Administrator; and to all international field offices.

3. CANCELLATION. FAA Order 8130.2E, Airworthiness Certification of Aircraft and Related Products, dated January 23, 2003, is cancelled.

4. AUTHORITY TO CHANGE THIS ORDER. The issuance, revision, or cancellation of the material in this order is the responsibility of the Aircraft Certification Service, Production and Airworthiness Division, AIR-200. All changes, as required, will be accomplished by this division to carry out the agency’s responsibility to provide for original and recurrent airworthiness certifications and related approvals for eligible aeronautical products.

5. DEVIATIONS. Adherence to the procedures in this order is necessary for uniform administration of this directive material. Any deviations from this guidance material must be coordinated and approved by AIR-200. If a deviation becomes necessary, the FAA employee involved should ensure the deviations are substantiated, documented, and concurred with by the appropriate supervisor. The deviation must be submitted to AIR-200 for review and approval. The limits of Federal protection for FAA employees are defined by Title 28, United States Code § 2679.

6. FORMS. Examples of forms referenced in this order are found at the end of the section or chapter in which they are referenced.

7. ACRONYMS. The following acronyms are used in this order:

AC Advisory Circular ACO Aircraft Certification Office AD Airworthiness Directive APIS Approved Production Inspection System ASI Aviation Safety Inspector BAA Bilateral Airworthiness Agreement BASA Bilateral Aviation Safety Agreement CAA Civil Aviation Authority CAGE Commercial and Government Entity CAM Civil Aeronautics Manual

CAR Civil Air Regulation CFR Code of Federal Regulations 14 CFR Title 14, Code of Federal Regulations CG Center of Gravity CHDO Certificate Holding District Office CMACO Certificate Management Aircraft Certification Office CMO Certificate Management Office CMU Certificate Management Unit C of A Certificate of Airworthiness CO Certificating Office DA Department of the Army DAR Designated Airworthiness Representative DD 1427 DOD Form 1427, Notice of Award, Statement, and Release Document DER Designated Engineering Representative DGAC Direction Générale de l’Aviation Civile DMIR Designated Manufacturing Inspection Representative DOD Department of Defense DOT Department of Transportation DRMO Defense Reutilization Marketing Office EAA Experimental Aircraft Association EASA European Aviation Safety Agency ELSA Experimental Light-Sport Aircraft ELT Emergency Locator Transmitter ENAC Ente Nazionale per L’Aviazione Civile FAA Federal Aviation Administration FSCAP Flight Safety-Critical Aircraft Part FSDO Flight Standards District Office GPO Government Printing Office ICAO International Civil Aviation Organization ICAW Instructions for Continued Airworthiness ID Identification IFO International Field Office IFR Instrument Flight Rules IPA Implementation Procedures for Airworthiness IPC Illustrated Parts Catalog JAR Joint Aviation Requirements LBA Luftfahrt-Bundesamt LFV Luftfartsverket LSA Light-Sport Aircraft MCAI Mandatory Continuing Airworthiness Information MIDO Manufacturing Inspection District Office MIO Manufacturing Inspection Office MIP Maintenance Implementation Procedure MISO Manufacturing Inspection Satellite Office NAA National Aviation Authorities

NTSB National Transportation Safety Board ODA Organization Designation Authority PAH Production Approval Holder PC Production Certificate PCA Primary Category Aircraft PI Principal Inspector PMA Parts Manufacturer Approval R&D Research and Development RPM Revolutions Per Minute SFA Special Flight Authorization SFAR Special Federal Aviation Regulation SOC Statement of Compliance STC Supplemental Type Certificate 49 U.S.C. Title 49, United States Code TC Type Certificate TCDS Type Certificate Data Sheet TPA Turbine-Powered Aircraft TSO Technical Standard Order U.S. United States VFR Visual Flight Rules VLA Very Light Aircraft

8. DEFINITIONS. Some of the definitions included in part 1 of Title 14, Code of Federal Regulations (14 CFR) and other publications are listed below.

a. Aircraft Category. The term “category,” as used with respect to the certification of aircraft, means a grouping of aircraft based on their intended use or operating limitations, for example, normal, utility, acrobatic, or primary. For purposes of this order, gliders and balloons will be referred to as categories rather than classifications.

b. Aircraft Classification. The term “classification,” as used with respect to the certification of aircraft, means a broad grouping of aircraft having similar characteristics of propulsion, flight, or landing, that is, airplane, rotorcraft, glider, or balloon.

c. Amateur-Built Aircraft. Sometimes referred to as home-built aircraft. These aircraft have been issued an experimental certificate under § 21.191(g).

d. Authorized Instructor. A person who holds a valid ground instructor certificate under 14 CFR part 61 or part 142, or a person who holds a current flight instructor certificate issued under part 61.

e. Bilateral Agreement. The term “bilateral agreement” means an executive agreement between the U.S. Government and the government of another country to facilitate the airworthiness approval or acceptance of civil aeronautical products exported from one country (contracting state) to the other. There are two types of bilateral agreements related to airworthiness: Bilateral Airworthiness Agreements (BAA) and Bilateral Aviation Safety Agreements (BASA). These agreements are not trade

agreements, but rather technical cooperation agreements. These agreements are intended to provide a framework for the airworthiness authority of the importing country to give maximum practicable credit to airworthiness certification functions performed by the airworthiness authority of the exporting country using its own certification system.

f. Category of Special Airworthiness Certificates. The term “category” also is used to identify the six specific certification processes and the seven types of special airworthiness certificates issued.

g. Certification Office. The FAA certification office at which the applicant applies for airworthiness certification or related approval: manufacturing inspection district office (MIDO), manufacturing inspection satellite office (MISO), flight standards district office (FSDO), international field office (IFO), certificate management office (CMO), certificate management unit (CMU), or the Brussels Aircraft Certification Division.

h. Classification of Airworthiness Certificates. The term “classification” also is used to distinguish between the standard and special airworthiness certification processes and certificates.

i. Consensus Standard. For the purpose of certificating light-sport aircraft (LSA), an industry-developed consensus standard that applies to aircraft design, production, and airworthiness. It includes, but is not limited to, standards for aircraft design and performance, required equipment, manufacturer quality assurance systems, production acceptance test procedures, operating instructions, maintenance and inspection procedures, identification and recording of major repairs and major alterations, and continued airworthiness.

j. Critical Characteristic. Any feature throughout the life cycle of a flight safety-critical aircraft part (FSCAP) which, if nonconforming, missing, or degraded, could cause a catastrophic failure resulting in loss or serious damage to the aircraft or an uncommanded engine shutdown resulting in an unsafe condition. A characteristic can be critical in terms of dimension, tolerance, finish, or material; an assembly, manufacturing, or inspection process; or an operation, field maintenance, or depot overhaul requirement. A manufacturing-critical characteristic is produced during the manufacturing process. An installation-critical characteristic, such as torque, is critical in terms of assembly or installation.

k. DOD CAGE Code. The Department of Defense Commercial and Government Entity (DOD CAGE) code identifies the manufacturer of the article or product produced under government contract.

l. Dual-Use Product or Article. Any product or article manufactured for civil application by a production approval holder (PAH) authorized by the FAA and produced under a U.S. military contract. The military product (or article thereof) has the same part number and configuration as its civil counterpart and is manufactured using the same FAA-approved design, materials, and manufacturing processes. This could also include any product or article originally produced for the military which currently holds a normal, utility, acrobatic, or transport type certificate (TC) issued under 14 CFR part 21, Certification Procedures for Products and Parts, § 21.27.

m. Exception. A case in which a rule, general principle, etc., does not apply.

n. Exemption. Approval to be free from current regulations in 14 CFR.

o. Experimental Light-Sport Aircraft. An aircraft issued an experimental operating light-sport category aircraft airworthiness certificate. Experimental light-sport aircraft applies to those aircraft for which the certificate is issued regardless of the purpose within § 21.191(i), Operating light-sport aircraft.

p. Flight Safety-Critical Aircraft Part. Any article containing a critical characteristic whose failure, malfunction, or absence could cause (1) a catastrophic failure resulting in loss or serious damage to the aircraft, or (2) an uncommanded engine shutdown resulting in an unsafe condition.

q. Heavy Ultralight. An ultralight vehicle that does not meet 14 CFR part 103 requirements because of its weight, speed, or fuel capacity. It also may not meet the requirements for an experimental operating amateur-built airworthiness certificate as described in § 21.191(g).

r. Light-Sport Aircraft. A category of simple, very basic, small, lightweight, low-performance aircraft. It is an aircraft other than a helicopter or powered-lift. Also see definition in § 1.1.

s. Light-Sport Category. With respect to aircraft certification, the light-sport category adds a new group of aircraft based on the definition in § 1.1, limiting size, weight, and speed, and how the aircraft is equipped. This category contains four classes of aircraft: airplanes and gliders, powered parachutes, weight-shift-control, and lighter-than-air aircraft. The factors of intended aircraft use, operating limitations, and privileges of this category place it in hierarchy between the primary and experimental categories.

t. Light-Sport Eligible Kit. An eligible kit is one that is of the same make and model aircraft that has been issued a light-sport category airworthiness certificate by the FAA. The kit is manufactured by the same entity that built the aircraft, and that aircraft has been issued the LSA airworthiness certificate. Once built, the owner-assembled kit aircraft is eligible for the experimental, operating LSA certificate.

u. Manufacturer. A person who causes a product or article thereof to be produced.

v. Military Surplus Product or Article. A product or article that originally was released as surplus by the U.S. military, even if subsequently resold by a manufacturer, owner/operator, repair facility, or any other article supplier.

w. Military-Unique FSCAP. Any FSCAP specifically and uniquely designed and manufactured for the U.S. military, for which there is no corresponding FAA-approved type design or PAH engine, propeller, or article produced for civilian application. Breakout products or articles produced specifically for military use by a manufacturer other than an FAA PAH using military-provided designs, drawings, and specifications also are considered military-unique.

x. Part Out. To remove a part from or disassemble a product or article.

y. Powered Parachute. A powered aircraft comprised of a flexible or semi-rigid wing connected to a fuselage so that the wing is not in position for flight until the aircraft is in motion. The fuselage of a powered parachute contains the aircraft engine and a seat for each occupant, and is attached to the aircraft’s landing gear.

z. Previously Manufactured Aircraft. Existing aircraft-like vehicles meeting the definition of light-sport aircraft that do not meet the provisions of 14 CFR part 103, Ultralight vehicles, and are in a ready-to-fly condition.

aa. Production Approval Holder. A holder of a production certificate (PC), an approved production inspection system (APIS), a parts manufacturer approval (PMA), or a technical standard order (TSO) authorization who controls the design and quality of a product or part thereof.

bb. Statement of Compliance. A statement of compliance (SOC) is a signed statement made by the aircraft manufacturer stating that the aircraft (specific by serial number) was designed, manufactured, and is supported with a monitoring and correction of safety-of-flight within a continued airworthiness system, in accordance with the appropriate consensus standards.

cc. Two-Place Ultralight Training Vehicle. This is a two-place, noncertificated vehicle operated under a valid training exemption to part 103.

dd. Ultralight-like Vehicle. A vehicle that is similar to an ultralight but does not meet the definition or requirements of § 103.1.

ee. Ultralight Vehicle. As defined in part 103, an ultralight vehicle is a vehicle that—

(1) Is used or intended to be used for manned operation in the air by a single occupant;

(2) Is used or intended to be used for recreation or sport purposes only;

(3) Does not have a U.S. or foreign airworthiness certificate; and

(4) If unpowered weighs less than 155 pounds; or

(5) If powered, weighs less than 254 pounds empty weight, excluding floats and safety devices intended for deployment in a potentially catastrophic situation; has a fuel capacity not exceeding 5 U.S. gallons; is not capable of more than 55 knots calibrated airspeed at full power in level flight; and has a power-off stall speed that does not exceed 24 knots calibrated airspeed.

ff. Weight-Shift Control Aircraft. A powered aircraft with a framed pivoting wing and a fuselage controllable only in pitch and roll by the pilot’s ability to change the aircraft’s center of gravity (CG) with respect to the wing. Flight control of the aircraft depends on the wing’s ability to flexibly deform rather than the use of control surfaces.

*

9. INTERPRETATION OF THE TERM “AIRWORTHY” FOR U.S. TYPE-CERTIFICATED AIRCRAFT. The term “airworthy” is not defined in Title 49, United States Code (49 U.S.C.), or in 14 CFR; however, a clear understanding of its meaning is essential for use in the agency’s airworthiness certification program. Below is a summary of the conditions necessary for the issuance of an airworthiness certificate. A review of case law relating to airworthiness reveals two conditions that must be met for an aircraft to be considered “airworthy.” 49 U.S.C. § 44704(c) and 14 CFR § 21.183(a), (b), and (c) state that the two conditions necessary for issuance of an airworthiness certificate:

a. The aircraft must conform to its TC. Conformity to type design is considered attained when the aircraft configuration and the engine, propeller, and articles installed are consistent with the drawings, specifications, and other data that are part of the TC, which includes any supplemental type certificate (STC) and field approved alterations incorporated into the aircraft.

b. The aircraft must be in a condition for safe operation. This refers to the condition of the aircraft relative to wear and deterioration, for example, skin corrosion, window delamination/crazing, fluid leaks, and tire wear.

NOTE: If one or both of these conditions are not met, the aircraft would be considered unairworthy. Aircraft that have not been issued a TC must meet the requirements of paragraph 9b above.

10. INFORMATION CURRENCY. Any deficiencies found, clarifications needed, or improvements suggested regarding the content of this order should be forwarded (written or electronically) for consideration to the Aircraft Certification Service, Administrative Services Branch, AIR-510, Attention: Directives Management Officer. FAA Form 1320-19, Directive Feedback Information, is located on the last page of this order. A copy may be forwarded to the Production and Airworthiness Division, AIR-200, Attention: Comments to Order 8130.2F. If an interpretation is urgently needed, contact the Aircraft Engineering Division, AIR-100, AIR-200, or, for flight standards concerns, the Continuous Airworthiness Maintenance Division, AFS-300. Always use Form 1320-19 to follow up each verbal conversation.

11. RECORDS MANAGEMENT. Refer to FAA Orders 0000.1, FAA Standard Subject Classification System; 1350.14, Records Management; and 1350.15, Records Organization, Transfer, and Destruction Standards; and FAA-IR-04-01A, or see your office Records Management Officer/Directives Management Officer for guidance regarding retention or disposition of records.

12. RESERVED FOR FUTURE CHANGES.

CHAPTER 2. GENERAL POLICIES AND PROCEDURES

CHAPTER 2. GENERAL POLICIES AND PROCEDURES

SECTION 1. GENERAL INFORMATION

13. REPRESENTATIVES OF THE FAA AUTHORIZED TO ISSUE AIRWORTHINESS CERTIFICATES AND RELATED APPROVALS.

a. Consistent with applicable Aircraft Certification Service policies and instructions, an FAA manufacturing or airworthiness ASI is authorized to issue airworthiness certificates and related approvals covered in this order.

SECTION 1. GENERAL INFORMATION

b. The FAA is authorized under 14 CFR part 183, Representatives of the Administrator, to designate private persons or organizations to act as representatives of the Administrator to issue airworthiness certificates and related approvals. A designated manufacturing inspection representative (DMIR) or designated airworthiness representative (DAR) may issue standard and special airworthiness certificates, airworthiness approvals, and export approvals, and may perform certain other examinations, inspections, and testing services relative to certification functions in the areas of manufacturing and maintenance. ASI certification functions will be delegated to the fullest extent practical, but not to the extent an advisor’s technical skills are jeopardized. The designee’s Certificate of Authority must specify the type and limitation of authority granted.

NOTE: The authority of a DMIR must be specifically linked to a PAH or a PAH’s approved supplier.

c. The FAA is authorized under part 183, subpart D, to delegate specific functions to organizations on behalf of the FAA, related to engineering, manufacturing, operations, airworthiness, or maintenance for the purpose of issuing airworthiness certificates and related approvals. An ODA may be approved to issue airworthiness certificates, airworthiness approvals, conformity certifications, and export approvals. Refer to FAA Order 8100.15, Organization Designation Authorization Procedures, for further information on ODA.

d. The use of electronic signatures on airworthiness certificates, including Export Certificates of Airworthiness, is not permitted.

14. RESPONSIBILITIES OF FAA AVIATION SAFETY INSPECTORS AND DESIGNEES.

a. The procedures in this order cover original airworthiness certification for which FAA manufacturing ASIs are primarily responsible, and recurrent airworthiness certification for which FAA airworthiness ASIs are primarily responsible. FAA manufacturing and airworthiness ASIs may assist each other by mutual agreement.

b. The FAA designees, within the limits of their authority, are authorized to issue original or recurrent airworthiness certificates and related approvals. They are responsible for determining that the products or articles submitted to them conform to the approved type design, are in a condition for safe operation, and meet any other specified requirements. They also are responsible for the completeness, accuracy, and processing of all official documents and paperwork as provided for in this order. All actions taken by the designees on behalf of the FAA are subject to the monitoring, review, and approval of the supervising ASIs.

11/5/2004 8130.2F

c. ASIs are responsible for training and supervising designees assigned to them regarding airworthiness certification procedures and all related documentation. The supervising ASI should also ensure that designees have been provided (or have access to) the appropriate regulations, instructions, and forms necessary for the performance of their designated duties.

d. ASIs will supervise and maintain surveillance over the certification activities accomplished by designees to ensure that all certifications and approvals comply with the applicable rules, policies, and procedures.

NOTE: In this order, the term “ASI” refers to the FAA airworthiness inspector (that is, manufacturing and flight standards) and/or his or her authorized designee. Designees will perform only authorized functions.

15. POSSESSION AND DISPLAY OF AIRWORTHINESS CERTIFICATES. Any airworthiness certificate issued to a U.S.-registered civil aircraft must be displayed at the cabin or cockpit entrance so that the certificate is legible to passengers or flightcrew members (14 CFR part 91, General Operating and Flight Rules, § 91.203(b)).

16. AIRCRAFT REGISTRATION.

a. Registration. The procedures for aircraft registration and issuance of registration numbers are contained in 14 CFR part 47, Aircraft Registration. The registration of aircraft is not a function of airworthiness certification; however, U.S. registration is a prerequisite for issuance of an airworthiness certificate. The FAA must ensure that an aircraft presented for airworthiness certification is properly registered (49 U.S.C. § 44704(c) and 14 CFR § 21.173).

b. Proof of Ownership. The applicant for registration of an aircraft must submit proof of ownership to the FAA Aircraft Registration Branch (AFS-750) that meets the requirements prescribed in part 47. The Aeronautical Center Form 8050-2, Aircraft Bill of Sale, or its equivalent, may be used as proof of ownership. If the applicant did not purchase the aircraft from the last registered owner, the applicant must submit a complete chain of ownership from the last registered owner to the applicant. The purchaser under a contract of conditional sale is considered the owner for the purpose of registration. The contract of conditional sale may be submitted as proof of ownership in lieu of a bill of sale.

c. Aircraft Operation Outside the United States Pending U.S. Registration. For aircraft operations to or from the United States, including operations conducted wholly outside the United States, a current airworthiness certificate and Certificate of Aircraft Registration, Aeronautical Center Form 8050-3, must be carried in the aircraft. Pending receipt of Form 8050-3, AFS-750 will, upon request, transmit a telex/fax confirmation of registration to the party whose name appears on the application as owner or authorized agent. The telex/fax may be used as a temporary Certificate of Aircraft Registration pending receipt of the original certificate.

8130.2F 11/5/2004

17. AIRCRAFT NATIONALITY, REGISTRATION MARKS, RESERVATION OF SPECIAL REGISTRATION NUMBERS, AND DISPLAY OF REGISTRATION MARKS.

a. Registration Numbers. All U.S. civil aircraft registration numbers are prefixed by an “N.” The registration number, apart from the “N” prefix, is made up of one to five symbols, the last two of which may be alphabetical. This alphabetical suffix must be preceded by at least one numerical symbol. The lowest possible number is N1. A zero never precedes the first number. For example:

N1 through N99999, all symbols are numeric. N1A through N9999Z, single alphabetical suffix. N1AA through N999ZZ, double alphabetical suffix.

NOTE: To avoid confusion with the numbers zero and one, the letters “O” and “I” are never used as alphabetical suffixes.

b. Reservation of Registration Numbers.

(1) A person may reserve a registration number of his or her choice, if available, for 1 year by sending a written request and the appropriate fee for each number to be reserved to the following address:

FAA Aircraft Registration Branch, AFS-750

Mike Monroney Aeronautical Center

P.O. Box 25504 Oklahoma City, OK 73125-0504

(2) The applicant should list five numbers in case the first choice is not available. Reservations may be renewed from year to year by paying the appropriate fee before the end of the renewal period. If the renewal payment is not received before the end of the 1-year period, reservation of the special registration number will expire.

NOTE: Once AFS-750 has been notified that the numbers have been permanently affixed to the aircraft and the airworthiness certificate has been issued, no subsequent fees apply.

c. Special Registration Numbers.

(1) Aircraft owners must apply for a special registration number in writing to AFS-750 and describe the aircraft. Permission to place the special number on the aircraft will be given on Aeronautical Center Form 8050-64, Assignment of Special Registration Numbers. The owner must complete, sign, and return the original form to AFS-750 within 5 days after the special registration number is affixed to the aircraft. The duplicate of Form 8050-64 and the present airworthiness certificate must be presented to the FAA representative, who will issue a replacement airworthiness certificate showing the new registration number. The old Certificate of Aircraft Registration and the duplicate Form 8050-64 must be carried in the aircraft until the new Certificate of Aircraft Registration is received (see § 47.15(f) and figure 2-1).

11/5/2004 8130.2F

(2) Any changes in the current assignment of nationality and registration numbers will be processed as a request for assignment of special registration numbers.

d. Size of Registration Numbers.

(1) Nationality and registration marks displayed on all aircraft, with exception of aircraft covered in 14 CFR part 45, Identification and Registration Marking, § 45.29(b)(1)(iii) and (b)(2), must be at least 12 inches high in accordance with § 45.29. However, certain aircraft may display smaller registration marks as identified in § 45.29(b)(1)(i) and (b)(3) until the aircraft are repainted, restored, or changed. Once these aircraft are repainted or the marks are repainted, restored, or changed, 12-inch-high registration numbers must be displayed.

(2) FAA inspectors should be alert for newly repainted aircraft registration marks and ensure the marking is consistent with § 45.29. An enforcement action should be initiated against the aircraft owner/operator whenever an FAA inspector finds that an aircraft has not been marked with 12-inch-high registration numbers in accordance with § 45.29(b)(1)(i) or (b)(3).

(3) Nationality and registration marks of at least 3 inches high may be displayed on an aircraft issued an experimental certificate under § 21.191(d), (g), or (i) to operate as an exhibition aircraft or an amateur-built aircraft, or when the aircraft maximum cruising speed does not exceed 180 knots calibrated airspeed. Marks of at least 3 inches high also may be displayed on airships, spherical balloons, nonspherical balloons, powered parachutes, and weight-shift-control aircraft in accordance with § 45.29.

(4) When marks include only the Roman capital letter “N” and the registration number is displayed on limited, restricted, light-sport, experimental, or provisionally certificated aircraft, the operator must also display on that aircraft near each entrance to the cabin, cockpit, or pilot station, in letters not less than 2 inches nor more than 6 inches high the words “limited,” “restricted,” “light-sport,” “experimental,” or “provisional,” as applicable per § 45.23.

(5) Powered parachute and weight-shift-control aircraft must display the marks required by § 45.23. The marks must be displayed horizontally and in two diametrically opposite positions on any fuselage structural member.

18. DISPLAY OF NATIONALITY AND REGISTRATION MARKS ON ANTIQUE AND ANTIQUE REPLICA AIRCRAFT.

a. Section 45.22(b)(1)(ii) provides, in pertinent part, that small U.S.-registered aircraft at least 30 years old, or aircraft that have been issued an experimental certificate for the purpose of exhibition or operating an amateur-built aircraft and that have the same exterior configuration as a 30-year-old aircraft, may display marks consisting of the Roman capital letter “N” followed by the U.S. registration number or the symbol appropriate to the airworthiness certificate of the aircraft (for example, “C,” standard; “R,” restricted; “L,” limited; or “X,” experimental) followed by the U.S. registration number. The symbol used must be appropriate for the airworthiness certificate of the aircraft being certificated, NOT the aircraft being replicated.

EXAMPLE 1. A Great Lakes 2T-1A aircraft manufactured in 1929 is registered in the United States and has been issued nationality and registration mark N1234. The aircraft has been issued a standard airworthiness certificate. The owner/operator may display the mark NC1234 if so desired.

EXAMPLE 2. An aircraft that has the same exterior configuration as the Great Lakes 2T-1A is registered in the United States and has been issued nationality and registration mark N5678. An experimental airworthiness certificate has been issued under § 21.191(d) or § 21.191(g). The owner/operator may display the mark NX5678 if so desired.

b. When aircraft are marked as described in § 45.22(b)(1)(ii), the airworthiness and registration certificates will NOT include the inserted symbol. In example 1 above, the aircraft could be marked NC1234, but the registration and airworthiness certificates would reflect only the N1234.

c. When making a query of the FAA Civil Aviation Registry (FAA Aircraft Registry) computer database, the inserted symbol must be omitted in order to obtain accurate information concerning the aircraft.

d. In addition, § 45.23(b) provides that when the appropriate symbol is used with the nationality and registration marks in accordance with § 45.22(b)(1)(ii), the word “limited,” “restricted,” or “experimental” is not required to be displayed on the aircraft.

19. ORIGINAL AND REPLACEMENT IDENTIFICATION PLATES.

a. Original Data Plates. Each aircraft presented for airworthiness certification must meet the requirements of § 21.182. Each aircraft, aircraft engine, propeller, propeller blade, and propeller hub manufactured under a TC or PC must be identified with the information specified in § 45.13. Manned free balloons are required to comply with § 45.11(d).

b. Replacement Data Plates.

(1) When FAA personnel receive inquiries regarding replacement, removal, or destruction of identification (ID) plates, the sample letter in figure 2-2 may be used as a guide for responding.

(2) When a new ID plate is required, the owner or the owner’s authorized representative contacts the appropriate certification office. The FAA determines whether the request is valid and provides a letter to the applicant with the FAA’s finding. If the FAA determines that the request is valid, the applicant includes the FAA letter with his or her request for the replacement data plate from the appropriate manufacturer.

(3) Upon notification by the applicant, which must include the FAA’s letter, the product manufacturer may then issue the replacement ID plate.

(4) The old ID plate, when available, must be voluntarily surrendered by the owner with a written statement to the FAA office who authorized the replacement. The FAA office must make a copy of the plate and then physically destroy it. The FAA office must then submit a letter to AFS-750 stating that the surrendered plate has been destroyed. AFS-750 will include the letter in the permanent aircraft records file.

c. Removal of Data Plates. Section 45.13 permits persons performing maintenance operations under 14 CFR part 43, Maintenance, Preventive Maintenance, Rebuilding, and Alteration, to remove an aircraft data plate. The removal must be done in accordance with the methods, techniques, and practices acceptable to the FAA. The ID plate removed may be reinstalled only on the product from which it was removed.

d. Misuse of Data Plates.

(1) ASIs should be on alert for any indication of ID plate misuse or suspicious activity, such as the building of a complete aircraft by a person performing work under part 43. Installation of an ID plate by a person performing work under part 43, where the ID plate has been purchased or salvaged from another aircraft, is not approved unless written approval is obtained from the FAA.

(2) Before issuing an airworthiness certificate for an aircraft that appears to be a repair or restoration of an aircraft that previously has been destroyed or demolished, the ASI should seek the assistance of the manager of AFS-750. That office can assist the ASI in determining whether the serial number of the aircraft on which certification is sought is the serial number of an aircraft previously classified as destroyed or demolished by the FAA or the National Transportation Safety Board (NTSB). If the ASI determines that the ID plate comes from a previously destroyed or demolished aircraft, the ASI must initiate an investigation to determine whether a violation of § 45.13(c) or (e) has occurred before the airworthiness certificate may be issued. If a violation of § 45.13(c) or (e) is found, the ASI must deny the airworthiness certificate and initiate an enforcement action.

NOTE: When the ID plate is surrendered, the ID plate is no longer considered personal property.

e. New Data Plates. The appropriate FAA office (for example, FSDO, MIDO, or MISO) may authorize a builder of an aircraft authorized to be assembled from spare and/or surplus articles in accordance with Advisory Circular (AC) 21-13, Standard Airworthiness Certification of Surplus Military Aircraft and Aircraft Built From Spare Parts, to make a new data plate for that aircraft upon a satisfactory showing that the aircraft conforms to its type design and is in a condition for safe operation. However, ensure the aircraft is eligible for a certificate of airworthiness as built from spare and/or surplus articles in accordance with § 21.6, § 21.183, and paragraph 57-1 of this order before authorizing the builder to make a data plate. The data plate will be made in accordance with part 45 and affixed to the aircraft prior to the issuance of any airworthiness certificate.

20. PUBLIC AIRCRAFT.

a. Public aircraft are defined in 49 U.S.C. § 40102(a)(37).

b. “Public Aircraft” is NOT a status that is granted by the FAA. There is no requirement to make a declaration in writing of this status, nor is there any responsibility to carry any proof of this status. The burden of proof is on the operator to establish to the FAA’s satisfaction that an aircraft is a public aircraft if its status is questioned.

c. A U.S.-registered public aircraft operating within the territorial limits of the United States is not required to have an airworthiness certificate. However, any U.S.-registered public aircraft engaged in international air navigation is required to have a valid certificate of airworthiness, in accordance with the International Civil Aviation Organization (ICAO) agreements.

d. Safety is enhanced through the operation of aircraft certificated according to part 21, and the FAA encourages those who operate public aircraft to obtain the appropriate airworthiness certification, if possible. An application for an airworthiness certificate for a public aircraft will be processed in accordance with the applicable procedures in this order. The airworthiness certificate, when issued, is effective only if all terms and conditions of the certificate are complied with. If part 43, part 45, and part 91 are NOT complied with, FAA Form 8100-2, Standard Airworthiness Certificate, must be surrendered.

e. Public aircraft must be registered in accordance with part 47 and must display nationality and registration marks in accordance with part 45. Any deviations from these requirements must be processed in accordance with the procedures in 14 CFR part 11, General Rulemaking, applicable to petitions for exemptions.

f. Aircraft operated by the FAA will be certificated in accordance with part 21, except for those aircraft authorized by the Director, Office of Aviation System Standards, or by the Director’s designee, to be operated as public aircraft. Certificated aircraft must display an appropriate airworthiness certificate.

g. Non-certificated FAA aircraft will display a public aircraft document in lieu of the airworthiness certificate. All requests for the public aircraft document will be processed through the Director, Aviation Systems Standards, Oklahoma City, Oklahoma (AVN-100). The letter of request must contain, at a minimum the—

(1) Nationality and registration marks,

(2) Manufacturer and model,

(3) Aircraft serial number,

(4) Location (base of operation/airport) of the aircraft, and

(5) Registered owner and operator of the aircraft.

h. The signed public aircraft document will be displayed in the aircraft at all times in lieu of the airworthiness certificate. For procedures applicable to public aircraft operated by the FAA, refer to FAA Order 4100.24, General Maintenance Manual.

21. AIRCRAFT BEING REMOVED FROM A CONTINUOUS MAINTENANCE SYSTEM.

a. No change in the airworthiness certificate is required if the aircraft has a current airworthiness certificate, Form 8100-2.

b. Operators of aircraft previously operated under 14 CFR part 121, Operating Requirements: Domestic, Flag, and Supplemental Operations, or part 91, subpart D, Special Flight Operations, and intending to operate them under part 91, must select, identify, establish, and use an inspection program as prescribed in § 91.409(e), (f), (g), and (h).

c. It also is important for the operator to know the current status of the aircraft relative to applicable requirements, for example, (1) weight and balance data, (2) flight manual appropriate to the operation, and (3) compliance with airworthiness directives (AD). Some carriers have exemptions or adjusted AD compliance times.

22. OPERATION OF CIVIL AIRCRAFT WITH A DOOR OPEN OR REMOVED FOR PARACHUTING, SKYDIVING, OR OTHER SPECIAL OPERATIONS.

a. AC 105-2, Sport Parachute Jumping, lists aircraft that the FAA has determined can safely be flown with one door open or removed if operated in accordance with specified operating limitations.

b. Owners or operators using aircraft listed in appendix 2 to AC 105-2 interested in obtaining authorization with operating limitations for operation of such aircraft for parachuting or other special operations must forward a written request to the FSDO having jurisdiction over the area in which the operations are to be conducted. The request must contain the following information:

(1) Name and address of the registered aircraft owner;

(2) Make, model, serial, and registration number of the aircraft;

(3) Location where aircraft normally is based; and

(4) Reason for the aircraft to be operated with a door removed.

c. There are two avenues for operation with the door removed:

(1) If identified in AC 105-2 to operate with the door removed and no STC is installed, operating limitations must be issued by the FAA.

(2) Aircraft other than those listed in AC 105-2 will be modified in accordance with STC procedures in part 21. If altered in accordance with an STC, no other limitations are required.

d. Sample operating limitations are outlined in figure 2-3 and must be issued by ASIs for any aircraft listed in AC 105-2. The ASI must note on the operating limitations the aircraft make, model, registration and serial number, type of operation authorized, date of issuance, ASI’s name, and district office number. On an aircraft that requires removal or opening of a particular door, the ASI must specify in the limitations which door may be removed or opened.

NOTE: A copy of the limitations must be forwarded to AFS-750.

e. Removal or installation of a cabin door for the specified aircraft is considered maintenance and as such must be accomplished by persons authorized under § 43.3.

f. If operations of rotorcraft with the doors opened or removed obstructs the nationality and registration marks from view, the operator must notify the appropriate managing office in writing detailing the nature of the proposed operation and the proposed dates of operation with doors removed. The managing office will then instruct the operator to affix temporary nationality and registration marks on an authorized surface required by § 45.27(a). The size of the marks must comply with § 45.29(b) unless no authorized surface is large enough for display of marks meeting the size requirements of this section. The rotorcraft would then be marked on the largest authorized surface with marks as large as practicable, as allowed by § 45.29(f). Any remnants of the permanent nationality and registration marks must be obliterated so as not to confuse identification of the rotorcraft with temporary markings. The temporary markings must be able to endure flight operations in various weather conditions. Flight operations must be authorized in writing by the managing office for a specified time and purpose. The managing office will verify that the temporary markings comply with 14 CFR and that the rotorcraft is returned to its permanent marking scheme.

g. Under appendix A to part 43, paragraph (c)(15), a pilot may be authorized to remove or reinstall passenger seats if the pilot is specifically listed by name in the operating limitations for the aircraft. The issuing ASI may require the pilot to demonstrate his or her ability in this preventive maintenance function.

h. Removal or installation of control sticks and wheels must be performed in accordance with the applicable sections of part 43.

23. BANNER TOWING. An aircraft that is in full compliance with its type design and has an FAA-approved banner tow installation may be operated under a standard airworthiness certificate for banner towing purposes. An aircraft that has a standard airworthiness certificate and is modified for a special purpose operation must be operated under a multiple airworthiness certificate (standard/restricted) when the following conditions occur:

a. The special purpose modification does not meet the type design.

b. The special purpose modification is not approved for standard category use.

c. The aircraft will be operated outside the normal category operating limitations.

24. RESERVED FOR FUTURE CHANGES.

SECTION 2. AIRWORTHINESS CERTIFICATES AND CERTIFICATIONS

25. GENERAL. Form 8100-2 and FAA Form 8130-7, Special Airworthiness Certificate, will be referred to as being either a standard or a special classification within this order.

SECTION 2. AIRWORTHINESS CERTIFICATES AND CERTIFICATIONS

26. CLASSIFICATION AND CATEGORY OF AIRWORTHINESS CERTIFICATES.

a. Standard Classification. Form 8100-2 may be issued for an aircraft that fully complies with all of the requirements applicable to the normal, utility, acrobatic, commuter, or transport category, manned free balloons, or any other special classes of aircraft designated by the FAA.

b. Special Classification. Form 8130-7 may be issued for an aircraft that does not meet the requirements for a standard airworthiness certificate. The certificate may be issued for an aircraft that meets the following:

(1) Primary. Aircraft that satisfies the requirements of § 21.184.

(2) Restricted. Aircraft that satisfies the requirements of § 21.185.

(3) Limited. Aircraft that satisfies the requirements of § 21.189.

(4) Provisional. Aircraft that satisfies the applicable requirements of part 21, subpart C, Provisional Type Certificates, and part 21, subpart I, Provisional Airworthiness Certificates.

(5) Light-Sport. Aircraft that meets the requirements of § 21.190.

(6) Experimental. For any category of aircraft, including amateur-built (§§ 21.191, 21.193, and 21.195).

(7) Special Flight Permits. Form 8130-7 may be issued for an aircraft that does not currently meet applicable airworthiness requirements, but is capable of safe flight, and meets the requirements of §§ 21.197 and 21.199.

27. REPLACEMENT, EXCHANGE, OR AMENDMENT OF AIRWORTHINESS CERTIFICATES.

a. Replacement.

(1) The FAA may issue a replacement airworthiness certificate when a certificate is declared lost, has been mutilated, or is no longer legible. The replacement airworthiness certificate must carry the original issue date of the certificate being replaced, preceded by a capital “R” in the Date block of the certificate. Replacement certificates also will be issued when the aircraft registration number has been changed. In these cases, a new application for airworthiness certification is not required.

(2) Request for a replacement certificate will be made to the applicable certification office. The registered owner or certificate operator will certify this by submitting a signed statement containing the registration number (N-Number), serial number, make, and model of the aircraft, and a reason the replacement certificate is needed. Replacement of airworthiness certificates must not be accomplished by verbal agreement with the assigned ASIs or through procedures contained in air carriers’ manuals that allow the continued operation of an aircraft without an airworthiness certificate. Such actions are contrary to §§ 91.203(b) and 121.153(a)(1), and 14 CFR part 135, Operating Requirements: Commuter and On-Demand Operations and Rules Governing Persons on Board Such Aircraft, § 135.25(a).

(3) A replacement airworthiness certificate may be issued without supporting documentation from AFS-750 if the date of issuance and the airworthiness classification and/or category of the lost or mutilated certificate can be positively established from the aircraft records, or from the remains of the certificate. If there is insufficient data on which to base issuance of the replacement certificate, the FAA ASI will obtain the required data electronically, by telephone, or by mail (such as the application form or previously issued airworthiness certificate) from AFS-750.

(4) Before issuing a replacement certificate, the FAA must review the aircraft records and, if necessary, inspect the aircraft to ensure that the applicant’s request is justified and the aircraft is eligible for the airworthiness certificate requested.

(5) A copy of the replacement certificate must be forwarded to AFS-750.

b. Amendment.

(1) A standard or special airworthiness certificate may be amended when there is—

(a) A modification to the aircraft, such as one that has been approved by an STC or amended TC, that changes the category of the aircraft specified in block No. 4 of the standard airworthiness certificate.

(b) A change to the exceptions specified in block No. 5 of the standard airworthiness certificate.

(c) A change in the aircraft model specified in block No. 2 of the standard airworthiness certificate.

(d) A change in the operating limitations for an aircraft with a special airworthiness certificate.

(2) An ODA may amend a standard airworthiness certificate, if authorized to perform the function in accordance with §183.49.

(3) When a certificate is amended, the issuance date will be the current date; also, the capital letter “A” will be typed in front of the date.

(4) Any amendment of an airworthiness certificate will require submission of FAA Form 8130-6, Application for Airworthiness Certificate. An appropriate record entry, in accordance with chapter 8 of this order, will be made in the aircraft records documenting the issuance of the amended certificate.

(5) Paragraph 29 of this order details further information on aircraft model changes.

(6) Operating limitations that were issued based on a previous edition of this order may be updated to include limitations contained in the current edition. The FAA does not require a new aircraft certification inspection for this type of administrative paperwork amendment (except as provided in paragraph 155 of this order).

c. Exchange. It is highly desirable that all aircraft currently certificated in the standard category carry Form 8100-2 to be consistent with the regulations. Owners and operators of general aviation and air carrier aircraft that still have FAA Form 1362A, Certificate of Airworthiness, should be encouraged to exchange such forms for the standard airworthiness certificate, Form 8100-2. In exchanging these certificates, the operating certificate number will NOT be entered on the revised form. Form 1362A will be attached to and forwarded with a copy of the revised certificate to AFS-750 to establish an official record of the exchange action. The foregoing exchange procedure also applies to Form 8130-7, in lieu of FAA Form 1362B, Certificate of Airworthiness. The new airworthiness certificate will reflect the date as indicated on Form 1362A or Form 1362B, preceded by a capital “E” in the Date block of the certificate.

28. SURRENDERED AIRWORTHINESS CERTIFICATE.

a. Airworthiness certificates voluntarily surrendered by written authorization of an aircraft owner or authorized representative must state why the certificate is being surrendered. The authorization and certificate must be forwarded to AFS-750 for retention in the permanent airworthiness files for that aircraft.

b. When a U.S.-owned aircraft is sold to a purchaser in another country or is leased for operations and registered in another country and is removed from the U.S. register, the airworthiness certificate is no longer effective; therefore, the airworthiness certificate must be surrendered to the FAA by the aircraft owner or operator as specified in § 21.335(e). The exporting FAA representative will request a copy of the deregistration and surrendered airworthiness certificate from the exporter to complete the FAA representative’s file.

29. AIRCRAFT MODEL CHANGE.

a. When an aircraft has been modified to conform to another model of the same make, the aircraft registration, airworthiness certificate, and aircraft ID plate must reflect the new model designation.

b. In addition to the existing ID plate, a new fireproof plate with the new model designation must be attached as close as physically possible to the original ID plate without obscuring it.

c. To maintain an accurate and continuous operating history for the aircraft, the original ID plate must not be altered in any manner.

d. The normal procedures, including any applicable inspections, apply when processing Form 8130-6. The amended airworthiness certificate will be identified with a capital “A” preceding the current date of the certificate being issued. If ownership of the aircraft has not changed, an application for aircraft registration, reflecting the new model designation, need not be submitted. AFS-750 will issue an amended registration certificate.

* *

30. SAFEGUARDING FAA AIRWORTHINESS CERTIFICATES. Airworthiness certificates are official forms and must be safeguarded by those FAA representatives who are charged with the responsibility for their issuance. Airworthiness certificates may not be produced in a computerized electronic format. Every measure must be taken to ensure these certificates are not obtained by unauthorized persons. At no time may a blank certificate be given to any unauthorized individual. Airworthiness certificates must be secured in a locked container when left unattended.

31. RECORDING OF CONFORMITY INSPECTIONS. FAA Form 8100-1, Conformity Inspection Record, should be used to document conformity inspections during type, production, and airworthiness certification programs. This form also may be used as a worksheet during any production surveillance activity to supplement official surveillance records and any inspections deemed appropriate during airworthiness certification (see figure 2-4).

a. Preparation. Form 8100-1 must be prepared in accordance with the instructions shown on the back of the form.

b. Retention. Form 8100-1 should be retained until it has been determined that it would serve no useful purpose.

32. AIRWORTHINESS CERTIFICATION OF MANNED FREE BALLOONS. Manned free balloons are type-certificated as complete aircraft consisting of three major components: the envelope, the burner and fuel system, and the basket. The burner and fuel system and basket also are known as the “bottom-end” components. Airworthiness certificates will not be issued for any individual component. The following are situations that may be encountered in certificating balloons in the standard category:

a. An applicant for a standard airworthiness certificate must present a complete system (three major components) for the purpose of making a determination of airworthiness.

b. Many balloon type certificate data sheets (TCDS) require each individual balloon envelope to be assigned an individual aircraft serial number, aircraft data plate, and aircraft registration number. As such, the balloon manufacturer obtains a registration number from the FAA Aircraft Registry, assigns the N-Number to the aircraft, and reports the aircraft model and serial number to the FAA Aircraft Registry. When an eligible envelope is mated with the necessary components to make a complete aircraft as described in the applicable TCDS, it is eligible for a standard airworthiness certificate.

c. Manufacturers of manned free balloons may deliver a balloon envelope when the envelope is the only component ordered. A balloon envelope that is manufactured, assembled to a burner and basket, and flight tested is eligible for a standard airworthiness certificate. The envelope, along with the standard airworthiness certificate and the logbook, may be delivered without the burner and basket. The envelope may then be assembled to a different burner and basket in accordance with the TC. A person may accomplish the interchange of the burner and basket as a preventive maintenance task as described below.

* *

*

*

d. A new airworthiness certificate is not required when the aircraft is disassembled and a different burner and basket combination is installed, as allowed by the TC. Reassembly of the envelope and bottom-end components into a complete aircraft may be performed as preventive maintenance under appendix A to part 43, paragraph (c)(27). The aircraft records must properly reflect the installation of the bottom-end components and record the new empty weight. The bottom-end components must be in a current “annual or 100-hour” inspection status. The individual records of the bottom-end components must be maintained. The due date of the next required inspection is determined based on the time the component parts are due for inspection.

e. If an envelope is provided only as a replacement part without obtaining a new aircraft serial number, registration number, or ID data plate, the installation of the replacement envelope is a maintenance item under part 43. This requires appropriate documentation of the work performed and a return to service entry in the aircraft records by a person authorized to perform the maintenance. The aircraft ID data plate, serial number, and registration number are carried over from the previous aircraft envelope.

f. For model changes, see paragraph 29 of this order.

33. RESERVED FOR FUTURE CHANGES.

*

*

* *

* *

8130.2F 11/5/2004

SECTION 3. INITIAL OR SUBSEQUENT ISSUANCE OF AIRWORTHINESS

SECTION 3. INITIAL OR SUBSEQUENT ISSUANCE OF AIRWORTHINESS

CERTIFICATES (ORIGINAL/RECURRENT) OR RELATED APPROVALS

34. GENERAL. This section clarifies the terms “original” and “recurrent” as related to the issuance of airworthiness certificates or approvals. Also identified in this section are the FAA offices responsible for performing such functions, including, as appropriate, the cross-utilization of FAA inspection personnel.

Continue reading ↓ 120 of 1178 passages shown