Radar Vectors
FAA Order Current Issued May 10, 2018 AVP-100 83 pages Copy saved Nov 18, 2026

Order 8020.11D Aircraft Accident and Incident Notification, Investigation, and Reporting w/ Change 1

This order establishes Federal Aviation Administration (FAA) procedures and responsibilities for aircraft accident and incident notification, investigation, and reporting.

Official source ↗ Open PDF

Text read by OCR from a scanned file (3 of 83 pages). Check the original, as some words may be misread.

Change 1 8020.11D

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION CHANGE

ORDER 8020.11D

CHG 1

Effective Date: National Policy 09/17/2021

SUBJ: Aircraft Accident and Incident Notification, Investigation, and Reporting

1. Purpose. This order establishes Federal Aviation Administration (FAA) procedures and responsibilities for aircraft accident and incident notification, investigation, and reporting.

2. Who this change affects. AVS services and offices.

3. Disposition of Transmittal Paragraph. Retain this transmittal sheet until the directive is cancelled by a new directive.

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated 5 05/10/18 5 09/17/21 19 05/10/18 19 09/17/21

4. Administrative Information. This order change is distributed to divisions and branches in Washington headquarters, regions, and centers and to all field offices and facilities.

Digitally signed by WARREN S WARREN S RANDOLPH

Date: 2021.09.17 RANDOLPH 08:47:02 -04'00'

Warren Randolph Deputy Executive Director Office of Accident Investigation Accident and Prevention

Distribution: Electronic Initiated By: AVP-100

U.S. DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION ORDER 8020.11D

National Policy Effective Date: 05/10/2018

SUBJ: Aircraft Accident and Incident Notification, Investigation, and Reporting

This order prescribes Federal Aviation Administration (FAA) procedures and responsibilities for aircraft accident and incident notification, investigation, and reporting. It also provides a description of the organization, functions, and authorities of the Accident Investigation Division, AVP-100. This order also provides direction and guidance to aviation safety inspectors and air safety investigators when they are called upon to act as, or support, the FAA Investigator-in-Charge (IIC) during an accident or incident investigation. It also explains the roles and responsibilities of the FAA and the National Transportation Safety Board (NTSB) when conducting investigations. All concerned personnel must familiarize themselves with the provisions of this order that pertain to their operational responsibilities and exercise their best judgment if they encounter situations not covered by the order.

8020.11D

OKElweM

Daniel K. Elwell Acting Administrator

Distribution: Electronic Initiated By: AVP-100

Table of Contents

Chapter 1. General Information … 5

1. Purpose of This Order … 5 2. Audience … 5 3. Where Can I Find This Order? … 5 4. What This Order Cancels … 5 5. Explanation of Changes … 5 6. Authority to Change This Order … 5 7. Definitions … 5 8. Distribution … 8

Chapter 2. FAA Investigative Responsibilities … 9

1. FAA Investigations … 9 2. Office of Accident Investigation and Prevention (AVP) … 9 3. AVP Investigative Responsibilities … 9 4. Aviation Safety (AVS) Offices Roles and Responsibilities … 14 5. Other FAA Offices and Lines of Business (LOB) Roles and Responsibilities … 15

Chapter 3. FAA Investigation Guidelines … 18

1. Overview … 18 2. FAA IIC Qualifications … 18 3. Training for FAA Personnel Designated to Participate in an Accident Investigation … 18 4. General Responsibilities of the FAA IIC … 19 5. Safety Precautions … 21 6. Potential Hazards … 22 7. Investigation Equipment … 23 8. Sharing of Investigative Information within the FAA … 25 9. Public Release of Information and Media Inquiry … 25 10. Initial Actions at the Accident Scene … 25 11. Organization and Conduct of the Field Phase of the Investigation … 27 12. Examination of Evidence … 32 13. Collection of Witness Statements and Witness Interviews … 33 14. Post-Accident and Incident Autopsy and Drug Testing … 34 15. Airman, Medical and Aircraft Records … 35 16. Handling of Wreckage Prior to Removal … 36 17. Preparing Contaminated Parts for Further Examination … 36 18. Concluding the Field Phase of the Investigation … 37 19. Retention and Examination of Aircraft Parts … 37 20. Release of Aircraft Wreckage and Parts … 38 21. Destroyed Aircraft … 38 22. Completion and Distribution of FAA Form 8020-23, “FAA Accident/Incident Report” … 38 23. Destruction of Documents and Information … 39 24. Accident Investigations Involving FAA and NTSB Personnel … 40 25. FAA Safety Recommendation Program … 40

Chapter 4. NTSB Investigation Guidelines … 42

1. Overview … 42 2. Organization of the Investigation … 42 3. NTSB Investigation Authority … 42 4. FAA and NTSB Accident and Incident Investigation Agreements … 42 5. Other Parties … 43 6. Separate FAA Investigation … 43 7. Initial Notification … 44 8. Notification Reporting via FAA Forms 8020-9 and 8020.11 … 45 9. ATO Flight Program Operations (Hangar 6) … 45 10. Coordination … 45 11. FAA Action When FAA Arrives on Accident Scene Before the NTSB IIC … 46 12. NTSB Organizational Meetings … 46 13. FAA Participants … 46 14. Investigative Groups … 47 15. Special Investigative Groups … 47 16. NTSB Interviews … 47 17. Responsibilities of FAA Participants Assigned to an NTSB Investigative Group … 47 18. Airman, Medical and Aircraft Records … 49 19. Examination of Deceased Air Crew Members … 50 20. Air Traffic Control Investigation Procedures … 50 21. FDR Data Recovery … 50 22. Conclusion of the Field Investigation … 51 23. Release of Aircraft Wreckage and Parts at Conclusion of Investigation … 51 24. Flow and Dissemination of Accident Information … 51 25. Public Release of Information and Media Inquiry … 51

Chapter 5. NTSB Public Hearings and Depositions … 52

1. Public Hearings … 52 2. Depositions … 52 3. FAA Action upon Notification of NTSB Hearing/Deposition … 52 4. FAA Spokesperson Selection and Duties … 52 5. FAA Representation at Pre-Hearing Conferences and Hearings … 52 6. Responsibilities of FAA Employees Called As Witnesses … 53 7. Exhibits and Transcripts … 53

Chapter 6. FAA Incident Investigation and Reporting … 54

1. Overview … 54 2. Incident … 54 3. Occurrence Reporting … 54 4. Completion and Distribution of FAA Form 8020-23, “FAA Accident/Incident Report” … 54 5. Service Difficult Reports (SDR) … 54 6. Air Traffic Reports to Flight Standards … 55 7. Pilot Deviation (PD) … 55 8. Foreign Air Carrier Incidents … 55 9. Near Mid-Air Collision (NMAC) … 55

Chapter 7. Special Types of Aircraft Accident/Incident Investigations … 56

1. Foreign Investigations … 56 2. Public Aircraft Investigations … 56 3. Military Investigations … 56 4. Ultralight Vehicles … 56 5. Parachute Jumping … 57 6. Emergency Aircraft Evacuations … 57 7. Criminal Incidents … 57 8. Commercial Space Vehicle Investigations … 57 9. Unmanned Aircraft Systems (UAS) Investigations … 60

Chapter 8. Safety Management System (SMS) Post-Accident Guidance … 62

1. Role of Accident and Incident Investigation in SMS … 62

Appendix A … A-1

Part 1. 49 CFR 800 Appendix, Request to the Secretary of the Department of Transportation to Investigate Certain Aircraft Accidents … A-2 Part 2. 49 CFR 830, Notification and Reporting of Aircraft Accidents or Incidents and Overdue

Part 4. NTSB and FAA Joint Policy Letter: FAA Access to Continued Operational Safety (COS)

Part 5. Memorandum of Understanding Between the NTSB and FAA Regarding Space Launch

Aircraft, and Preservation of Aircraft Wreckage, Mail, Cargo, and Records … A-3 Part 3. 49 CFR 831, Accident/Incident Investigation Procedures … A-7

Information During a NTSB Investigation … A-13

Accidents … A-15 Part 6. FAA Form 8020-23, FAA Accident/Incident Report (with instructions) … A-18

09/17/21 8020.11D CHG 1

Chapter 1. General Information

1. Purpose of This Order. This order establishes Federal Aviation Administration (FAA) procedures and responsibilities for aircraft accident and incident notification, investigation, and reporting.

Page 5 Change 1 8020.11D

2. Audience. This order is intended for all FAA personnel that are assigned to lead or support activities associated with aircraft accident and incident notification, investigation, and reporting.

3. Where Can I Find This Order? This order is located in electronic format on the FAA’s website and within the FAA Office of Accident Investigation and Prevention (AVP) at the following links: https://employees.faa.gov/tools_resources/orders_notices and http://www.faa.gov/about/office_org/headquarters_offices/avs/offices/avp/orders_forms.

4. What This Order Cancels. FAA Order 8020.11C, Aircraft Accident and Incident Notification, Investigation, and Reporting, dated February 02, 2010, and FAA Order 8020.11C Change 1 dated October 04, 2011, are cancelled.

5. Explanation of Changes. This revision corrects information regarding the Occupational Safety and Health (OSH) Training, that all FAA personnel are required to meet applicable Occupational Safety and Health Administration (OSHA) standards. The course numbers are removed from the Bloodborne pathogen training on page 19, paragraph b.

6. Authority to Change This Order. Only the Administrator or the Office of the Deputy Administrator may approve substantive changes to this directive. The Executive Director of the Office of Accident Investigation and Prevention may approve changes except those involving policy, assignment of responsibility, and delegation of authority. Those organizations with aircraft accident and incident notification, investigation, and reporting responsibilities should submit proposed changes or additions to the Office of Accident Investigation and Prevention, Accident Investigation Division, AVP-100.

7. Definitions. AVP has defined the following terms. You may find other terms referenced in Title 14 Code of Federal Regulations (CFR) §1.1. (See Chapter 7, paragraph 8, for definitions specific to commercial space transportation.)

a. Accredited Representative - an individual, typically an NTSB investigator, designated to

represent the U.S. during a foreign accident or incident investigation involving U.S. registered, operated, designed or manufactured aircraft. (Reference ICAO Annex 13, Section 5.18)

b. Aircraft Accident - An occurrence associated with the operation of an aircraft, which

takes place between the time any person boards the aircraft with the intention of flight and all such persons have disembarked, and in which any person suffers death or serious injury, or in which the aircraft receives substantial damage. (See 49 CFR §830.2)

c. Event – Something notable that happened in the National Airspace System (NAS), which

includes accidents, incidents and occurrences.

d. Event Response Team (ERT) - A diverse group of FAA air traffic subject matter experts led by the Event Investigation Manager (EIM) responsible for reviewing significant air traffic events that occur in the NAS as set forth in FAA Order JO 1030.3B, “Initial Event Response.”

e. FAA Investigation Participants - Those FAA persons assigned to assist the FAA Investigator-in-Charge (FAA IIC) in an investigation.

f. FAA Investigator-in-Charge - FAA personnel assigned to supervise and coordinate all FAA employees participating in an investigation. In each investigation, the FAA IIC is responsible for the management of all FAA resources and for determining whether the facts of the investigation indicate that any of the nine FAA responsibilities were involved in the event. During an NTSB investigation, the FAA IIC serves as the party coordinator for the FAA. During an international investigation, the FAA IIC typically serves as the technical advisor to an NTSB investigator who has been assigned as the U.S. Accredited Representative to the foreign investigative authority in accordance with ICAO Annex 13 protocol.

g. Group or Investigative Group - A group of individuals designated by the NTSB IIC to examine all facts within an assigned area of the investigation. Select parties are asked to provide a technical specialist to serve as a group member.

h. Group Chairman - The NTSB representative in charge of an investigative group activity during an NTSB investigation. The group chairman leads and supervises the activities of the technical specialists assigned to them and reports to the NTSB IIC.

i. Group Member - A member of a technical team of specialists from the FAA and other industry organizations assigned to an NTSB investigative group based on technical qualifications and expertise in the area to be examined.

j. Incident - An occurrence other than an accident, associated with the operation of an aircraft, which affects or could affect the safety of operations.

k. International Civil Aviation Organization (ICAO) - A specialized agency of the United Nations that promotes the safe and orderly development of international civil aviation standards and practices.

l. ICAO Annex 13, Aircraft Accident and Incident Investigation - Contains the international standards and recommended practices for aircraft accident and incident investigation as adopted at the Convention on International Civil Aviation.

m. National Transportation Safety Board (NTSB) - Per 49 CFR §831.2, the NTSB is the Federal agency responsible for the organization, conduct, and control of all civil aviation accident investigations and select incident investigations within the United States (U.S.) and its territories and possessions.

n. NTSB Investigator-in-Charge (IIC) - Per 49 CFR §831.8, the designated NTSB IIC organizes, conducts, controls and manages the NTSB’s investigation.

o. Near Mid-Air Collision (NMAC) - An incident associated with the operation of an aircraft in which a possibility of collision occurs as a result of proximity of less than 500 feet to another aircraft or where a report is received from a pilot or other flight crewmember stating that a collision hazard existed between two or more aircraft.

p. Occurrence - An abnormal event, other than an incident or accident.

q. Party to the Investigation - An individual or an organization designated by the NTSB IIC to participate in the investigation in order to provide technical assistance. Typically, parties are organizations such as the owner/operator, manufacturer, and unions. Organizations are not given automatic party status in an investigation and must be invited by the NTSB IIC, with the exception of the FAA (see 49 CFR §831.11). Per Title 49 United States Code (U.S.C.) §1132(c), the FAA has the right to participate in the investigation in order to carry out the duties of the Secretary of Transportation.

r. Party Coordinator - An individual who acts as the point-of-contact between the NTSB IIC and the coordinator’s organization during an NTSB investigation. The FAA IIC serves as the party coordinator representing the FAA.

s. Pilot Deviation (PD) - An action of a pilot that results in the violation of a Federal Aviation Regulation (FAR) or a North American Aerospace Defense (Command Air Defense Identification Zone) tolerance.

t. Serious Injury - any injury which: (1) requires hospitalization for more than 48-hours, commencing within 7-days from the date an injury was received; (2) results in a fracture of any bone (except simple fractures of fingers, toes, or nose); (3) causes severe hemorrhages, or nerve, muscle, or tendon damage; (4) involves any internal organ; or (5) involves second- or third-degree burns, or any burns affecting more than 5-percent of the body surface.

u. Significant Event - Any air traffic event in the NAS that may attract regional/national media or political attention, any aircraft proximity with less than 33 percent of the standard, any report of a NMAC with evasive action, or any major event that requires immediate upward notification to the Service Area or Headquarters level.

v. Substantial Damage - Damage or failure which adversely affects the structural strength, performance, or flight characteristics of the aircraft, and which would normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling, dented skin, small puncture holes in the skin or fabric, ground damage to rotor or propeller blades, and damage to landing gear, wheels, tires, flaps, engine accessories, brakes, or wingtips are not considered ‘‘substantial damage.” (See 49 CFR §830.2)

w. Technical Advisor - An individual assigned to assist the U.S. accredited representative during participation in an aircraft accident or incident investigation being conducted by a foreign government. The technical advisor in a foreign investigation serves in a similar role to the party coordinator in a domestic NTSB investigation. (Reference ICAO Annex 13, Section 5.24)

x. Title 14 of the Code of Federal Regulations (14 CFR) - Rules prescribed by the FAA governing all aviation activities in the U.S. These rules are also referred to as FARs.

y. Unmanned Aircraft System (UAS) - A system that includes an unmanned aircraft, control station and various mission elements used, or intended to be used, for flight. This includes all classes of airplanes, helicopters, airships, and translational lift aircraft that have no onboard pilot. The term UAS includes the airframe and all associated support elements including the control station, communication links, equipment and personnel necessary to conduct operations.

z. Unmanned Aircraft Accident (NTSB Definition) – An occurrence associated with the operation of any public or civil unmanned aircraft system that takes place between the time that the system is activated with the purpose of flight and the time that the system is deactivated at the conclusion of its mission, in which: (1) any person suffers death or serious injury; or (2) the aircraft has a maximum gross takeoff weight of 300 pounds or greater and sustains substantial damage. (See 49 CFR §830.2)

aa. Unmanned Aircraft Accident (FAA Definition) – any operation of a small unmanned aircraft (excluding model aircraft) involving at least:(a) serious injury to any person or any loss of consciousness; or (b) damage to any property, other than the small unmanned aircraft, unless one of the following conditions is satisfied: (1) the cost of repair (including materials and labor) does not exceed $500; or (2) the fair market value of the property does not exceed $500 in the event of total loss. (See 14 CFR §107.9)

bb. Washington Operations Center Complex (WOCC) - The FAA communication center responsible for providing the Administrator, Deputy Administrator, and all FAA Lines of Business with information and communication support to respond to stakeholders in an informed and timely manner.

8. Distribution. Electronic distribution.

Chapter 2. FAA Organization for Accident Investigation Responsibilities

1. FAA Investigations. Title 49 U.S.C. §40113 grants the FAA Administrator the authority to conduct investigations concerning aviation safety. Title 51 U.S.C §50917 grants the FAA authority to investigate commercial space launch mishaps (see Chapter 7, paragraph 8, of this order for additional information).

a. The FAA will ensure that all of the facts, conditions, and circumstances leading to an event are recorded and evaluated, and that action is taken to prevent similar events to the extent practical and feasible.

b. The FAA will conduct investigations to determine involvement in any of the following nine FAA areas of responsibility:

(1) Performance of FAA facilities or functions (including oversight responsibilities).

(2) Performance of non-FAA owned and operated air traffic control (ATC) facilities or navigational aids.

(3) Airworthiness of FAA-certificated aircraft.

(4) Competency of FAA-certificated airmen, air agencies, commercial operators, or air carriers.

(5) Adequacy of Federal Aviation Regulations.

(6) Airport certification safety standards or operations.

(7) Security standards or operations and/or hazardous materials.

(8) Airman medical qualifications.

(9) Violation of Federal Aviation Regulations.

2. Office of Accident Investigation and Prevention (AVP). AVP is the office responsible for directing aircraft accident investigation policy and standards for the FAA.

a. AVP’s Vision. Being recognized as an FAA and industry leader in safety investigation, analysis, and information sharing.

b. AVP’s Mission. Making air travel safer through investigation, data collection, risk analysis, and information sharing.

3. AVP Investigative Responsibilities.

a. Executive Director, Office of Accident Investigation and Prevention (AVP-1):

(1) Serves as the focal point for the Administrator in coordinating with the public, private, military, domestic, and international counterparts, and with representatives of accident and incident investigation interests.

(2) Provides leadership and direction in the planning, management, and control of office activities.

(3) Develops FAA policy and procedural instructions regarding accident and incident investigation and reporting.

(4) Reviews and assesses operational policies and activities as they relate to accident and incident investigations.

(5) Oversees the development of FAA policies and procedural instructions for the reporting and investigation of accidents and incidents affecting the safety of the NAS.

(6) Directs the FAA’s response to notification of an accident, incident or occurrence through the Director, Accident Investigation Division, AVP-100.

(7) Ensures the AVS management team is kept informed and updated on the progress of investigations and their findings.

(8) Apprises the Administrator, Associate Administrators, and other FAA office executives of safety issues and programs related to accident and incident investigation findings and analyses.

(9) Ensures the Administrator, Deputy Administrator, and Associate Administrator for Aviation Safety are provided with an Accident/Incident Information Book of pertinent background materials and data for any major air carrier accident/incident involving large teams of investigators. The Information Book should be provided as soon as possible and updated periodically.

(10) Participates as a member of the NASA Mishap Investigation Board.

(11) Coordinates with the Air Traffic Safety Oversight Service (AOV) on any changes to the investigation and reporting requirements of accidents, incidents and occurrences related to air traffic services, such as those in FAA Order 8020.16, “Air Traffic Organization Aircraft Accident and Incident Notification, Investigation, and Reporting.”

b. Director, Accident Investigation Division (AVP-100):

(1) Provides leadership and direction in the planning, management, administration and control of division activities.

(2) Ensures AVP-100 investigative personnel are adequately trained and equipped.

(3) Develops, coordinates, manages, and evaluates FAA accident investigation program policies, procedures, and practices.

(4) Serves on behalf of the Executive Director as the FAA’s primary point of contact for interaction with the NTSB with regard to investigative policies and activities.

(5) Determines events to which AVP-100 personnel will launch to conduct on-scene investigative activities.

(6) Assigns an AVP-100 FAA IIC for FAA investigations, as required.

(7) Assigns an AVP-100 FAA IIC for select NTSB investigations.

(8) Assigns AVP-100 investigative personnel to support NTSB investigative groups or activities, as necessary.

(9) Assigns a duty officer for purposes of event notification and coordination.

(10) Oversees the operations of the AVP Duty Room.

(11) Acts as (or designates) the FAA spokesperson for NTSB public hearings.

(12) Reports to the AVP Executive Director and appropriate FAA officials the facts, conditions, and circumstances of the event investigated, the apparent causal factors, and the relationships of those findings to FAA safety programs, regulations, and responsibilities.

(13) Oversees event notification programs, providing information to other FAA organizations.

(14) Disseminates initial FAA factual information identified as a result of accident and incident investigations. Produces and updates an Accident/Incident Information Book of pertinent background materials and data for major air carrier accidents/incidents involving large teams of investigators.

(15) Ensures that the AVP-100 Quality Management System documentation is appropriately maintained.

(16) Provides support and curriculum guidance to the Transportation Safety Institute (TSI) aircraft accident investigation courses at the National Aircraft Accident Investigation School, Oklahoma City, Oklahoma.

(17) Makes presentations to the general public on accident/incident investigations, aviation safety, commercial space safety and related matters.

(18) Participates in industry conferences.

(19) Serves as a research sponsor for the Civil Aerospace Medical Institute (CAMI), as needed.

(20) May serve as the AVP-100 FAA IIC for selected events.

c. Accident Investigator (AVP-100):

(1) Performs select duties of the deputy division director or team lead, when required.

(2) Coordinates the internal FAA flow of information regarding unsafe conditions within the NAS.

(3) Serves as the FAA IIC for investigations of select events, when appointed by the AVP-100 division director. AVP-100 FAA IICs have primacy over all other FAA IICs.

(4) Monitors, tracks and records information gathered during investigations and select events.

(5) Serves as the FAA IIC and as the FAA party coordinator for select NTSB investigations.

(6) Serves as a technical advisor to the NTSB and acts as a liaison with other FAA participants during foreign investigations.

(7) Participates in NTSB investigative group activities, as necessary.

(8) Serves as the FAA IIC for accidents involving FAA personnel if the accident or incident involves the FAA Flight Program or government-funded operation.

(9) Coordinates the assignment of FAA participants to act as group members for NTSB investigative group activities.

(10) Provides technical expertise for U.S. military mishap investigations, upon invitation.

(11) Launches on-scene for select foreign and domestic investigations, on a rotational basis. This may require immediate travel to hazardous locations that could demand physical exertion.

(12) Serves as the accident and incident investigation liaison between other FAA offices, U.S. departments and agencies, U.S. military entities, foreign governments, and the aviation industry.

(13) Relays information gathered during an investigation to pertinent FAA offices. In particular, reports to the AVP-100 division director and appropriate FAA officials the facts, conditions, and circumstances of the event investigated, the apparent causal factors, and the relationships of those findings to FAA safety programs, regulations, and responsibilities.

(14) Participates in NTSB investigative group activities, as necessary. In particular, may serve as the primary group member on flight data recorder (FDR), video recorder and cockpit voice recorder (CVR) investigative groups.

(15) Reviews flight data from FDR, global positioning system (GPS) units, and other devices that record onboard parametric aircraft data and video.

(16) Validates and analyzes flight data to provide plots and converted data to FAA investigators, inspectors and engineers for both NTSB investigations and FAA investigations.

(17) Supports safety data collection and analysis with other AVP divisions, as necessary.

(18) Provides assistance to the FAA Autopsy Program Team to identify pilots and obtain autopsy and toxicology results.

(19) Conducts root cause analysis during select investigations to assure proper identification and documentation of causal factors for the purpose of trend analysis to reduce hazards and risks in the NAS.

(20) Submits FAA Safety Recommendations as appropriate, and facilitates corrective actions.

(21) Acts as the AVP-100 Duty Officer on a rotational basis. Receives and documents phone calls from the WOCC, FAA personnel, NTSB personnel and CAMI personnel after normal business hours.

(22) Enters initial event notification into the duty room system database which will be published on the FAA website as required.

(23) Participates in industry conferences.

(24) Serves as a subject matter expert to provide instructional support and curriculum guidance to the TSI aircraft accident investigation courses at the National Aircraft Accident Investigation School, Oklahoma City, Oklahoma.

(25) Makes presentations to the general public on accident/incident investigations, aviation safety, commercial space safety and related matters.

(26) Receives and responds to incoming FAA Hotline calls after normal business hours.

d. FAA Duty Room Accident Information Management Specialist (AVP-100):

(1) Oversees the sorting and categorizing of daily reported events in the NAS for use in determining investigative activity.

(2) Ensures that event notifications are captured within the AVP-100 Duty Room system database.

(3) Collects information on all reported civil aircraft accidents and selected incidents for public dissemination on the FAA’s website during each work day.

(4) Maintains a monthly roster of the 24-hour AVP-100 duty officers and distributes this roster to the WOCC and AVP management.

(5) Compiles, reviews, and classifies preliminary notifications for presentation at the AVP-100 daily “round-up” meeting.

(6) Maintains a library of current aeronautical chart and map subscriptions, and historical aircraft make/model and aircraft manuals.

e. FAA Accident Information Program Analyst (AVP-100):

(1) Serves as the FAA liaison for all NTSB investigative requests for information, data, coordination of informational briefings, and interviews.

(2) Coordinates with NTSB public hearing officers and FAA participants for pre-hearing briefings, presentation material review, and compilation of the FAA hearing book.

(3) Develops and maintains reference accident case files and information within associated tracking systems.

(4) Serves as the AVP-100 coordinator for Freedom of Information Act (FOIA) requests, and assists the AVP FOIA coordinator.

(5) Serves as the point-of-contact for the FAA’s Frequently Asked Questions program for AVP.

(6) Serves as the point-of-contact for this order.

4. Aviation Safety (AVS) Offices Roles and Responsibilities. Other offices within AVS have a responsibility to provide subject matter expertise to support the FAA in the investigation of accidents, incidents and occurrences.

a. Flight Standards Service (FS). Detailed instructions regarding FS accident and incident response are outlined in Volume 7 of FAA Order 8900.1, Flight Standards Information Management Systems (FSIMS).

(1) Personnel from Flight Standards District Offices (FSDOs) are frequently assigned to act as the FAA IIC for investigations of accidents and incidents within their districts that do not involve assignment of an AVP-100 IIC.

(2) While the NTSB officially investigates all civil aircraft accidents, and will issue an accident report for each aircraft accident under its jurisdiction, the NTSB often does not travel to the accident scene due to their limited investigator resources. In those cases, the FAA Flight Standards inspector responding to the accident represents the FAA and, as a party to the NTSB investigation, will share information with the NTSB IIC. (See 49 CFR §831.11)

(3) The FAA IIC is responsible for completing FAA Form 8020-23 “FAA Accident/Incident Report.” In that report, the FAA IIC makes a determination whether any of the FAA’s nine responsibilities had any bearing on the event. In addition, the completed FAA Form 8020-23 contains the FAA IIC’s identification of any corrective actions planned or initiated, if applicable.

b. Office of Aerospace Medicine, Civil Aerospace Medical Institute (CAMI).

(1) The CAMI conducts toxicological analyses on specimens from, and special pathologic studies on, aerospace incident and accident victims.

(2) The CAMI Autopsy Program Team works with the FAA IIC and/or the NTSB IIC, for all fatal accidents, to coordinate autopsies of aircraft accident victims and obtain toxicological specimens.

(3) The CAMI Aeromedical Research Division provides medical expertise for all accidents as requested and medical case reviews and aerospace medical hazard analysis to the FAA IIC for all fatal

accidents. A copy of the medical case review/hazard analysis is also forwarded to the NTSB IIC. CAMI stores case reviews and hazard analysis in an electronic repository for safety analysis.

c. Aircraft Certification Service (AIR). The Aircraft Certification Service (AIR) provides engineering specialists, flight test pilots, manufacturing inspectors, and other specialists in areas such as, but not limited to human factors and continued operational safety to assist in the investigation of aircraft accidents and incidents that raise questions regarding product design and manufacture.

d. Air Traffic Safety Oversight Service (AOV). Upon request, AOV provides subject-matter expertise to investigations that involve air traffic control issues.

e. Unmanned Aircraft Integration Office (AUS). Operational and engineering specialists and inspectors from AUS will provide assistance in the investigation of UAS accidents in support of safe integration of UAS operations in the NAS. Flight Standards inspectors or AUS inspectors may be assigned to act as the FAA IIC for investigations of accidents and incidents that do not involve assignment of an AVP-100 IIC. Regardless of who is assigned as the FAA IIC, AUS will collaborate closely with AVP-100 in all accident and incident investigation activities related to UAS operations in the NAS.

5. Other FAA Offices and Lines of Business (LOB) Roles and Responsibilities. FAA LOBs and offices outside of AVS also have a responsibility to provide subject matter expertise to support the FAA in the investigation of accidents, incidents, and occurrences. The following organizations have additional investigative responsibilities:

a. Air Traffic Organization (ATO).

(1) The ATO can provide the initial notification of unsafe conditions in the NAS via the Air Traffic Quality Assurance data system (ATQA), or by manually completing and transmitting FAA Form 8020-9, “Aircraft Accident/Incident Preliminary Notice,” or the FAA Form 8020-11, “Incident Report.” The Comprehensive Electronic Data Analysis and Reporting (CEDAR) system may also be used. This information encompasses factual data that is required for collection to determine the need for an accident/incident investigation.

(2) When ATO services are involved in an accident or incident, AVP-100 may monitor the internal ATO investigation to ensure proper discharge of FAA responsibilities (see Chapter 4, paragraph 20 of this order for more information).

(3) Detailed direction and guidance regarding air traffic investigations can be found in the following orders:

(a) FAA Order JO 8020.16, “Air Traffic Organization Aircraft Accident and Incident Notification, Investigation, and Reporting,” provides direction and guidance to ATO service units, service centers, service areas, offices, and facilities when they are called upon to perform accident and incident investigations.

(b) FAA Order JO 1030.3B, “Initial Event Response,” prescribes ATO processes, roles, responsibilities, and timelines for collecting and reporting data in response to significant events in the NAS.

b. Office of Airport Safety and Standards (AAS).

(1) Upon receipt of notification that an accident or incident has occurred that may involve AAS functions, the regional airports division with jurisdiction will designate an airport certification inspector or other specialist to assist in the investigation.

(2) The Airport Safety and Operations Division, AAS-300, is designated as the primary contact with regard to the coordination of accident and incident information with AVP-100. All airport representatives will report to the FAA IIC and may be assigned to a working group when their expertise is required.

(3) When requested by the FAA IIC, AAS personnel will conduct investigations and provide investigation results to the FAA IIC. When an accident or incident occurs at an airport, the investigation will cover those items of AAS responsibility pertinent to the accident or incident.

(4) Further responsibilities of AAS during accident/incident investigations are detailed in FAA Order 5280.5, “Airport Certification Program Handbook.”

c. Office of Chief Counsel (AGC). A primary function of the AGC is to provide legal representation, counsel, and advice to the Office of the Administrator and other FAA offices and services in connection with accident investigations.

(1) The legal services required in an accident investigation vary by accident. Many FAA investigations conducted under Title 49 U.S.C. do not require substantial legal services. Some, however, demand full legal participation. In each accident investigation involving the FAA, it is the responsibility of AGC to provide the appropriate level of legal participation.

(2) A legal representative of AGC shall be designated for each aircraft accident or incident investigation where the degree of FAA interest is substantial enough to warrant legal participation. The legal representative will:

(a) Report to the FAA IIC upon arrival at the accident or incident scene. If not required to proceed to the scene, the representative will be kept informed of the progress of the investigation.

(b) Provide appropriate legal review of all evidence acquired by FAA during the investigation.

(c) Determine if any additional evidence should be obtained concerning the legal aspects of the investigation and request that evidence. This shall not affect the responsibility of the FAA IIC to ensure that all available relevant evidence is obtained. The legal representative should not hinder the normal investigative process.

(d) Brief FAA personnel on their conduct and responsibilities in the presentation of evidence at formal or informal interviews, hearings, or depositions.

(e) Provide legal representation for FAA personnel in all NTSB and military agency interviews and hearings.

(f) Perform all other legal functions which may be required during an investigation.

(g) Assist in the presentation of FAA evidence and the carrying out of FAA responsibilities.

d. Office of Security and Hazardous Materials Safety Office of National Security Programs and Incident Response (AXE).

(1) The WOCC, AXE-100, notifies AVP-100 of events:

(a) Impacting aviation safety.

(b) Causing substantial damage to property or aircraft or possible injury.

(c) Anticipated to generate media coverage.

e. Office of Communications (AOC). Representatives of AOC will not release any accident or incident information as the release of the information could interfere with the investigation efforts. The restriction on the release of information is not intended to hamper the free exchange of factual information between individuals and organizations (such as product manufacturers of airframes, engines, etc.) that are part of the investigating team. Media relations staff may release information related to the investigation to the news media or public during the investigation, provided authorization is obtained from:

(1) The NTSB IIC, or concurrence of the NTSB Public Affairs Office, when an investigation is conducted by NTSB; and

(2) The FAA IIC; and

(3) The Administrator or Deputy Administrator.

f. Office of Government and Industry Affairs (AGI). Representatives of AGI will advise the Administrator and Deputy Administrator on all matters concerning the Congress, aviation industry groups, and other governmental organizations with respect to aviation accidents and incidents. AGI will serve as the primary point of contact for Members of Congress and congressional staff for all FAA issues and inquiries related to accident and incidents. Designated representatives of AGI will ensure information is provided for the Administrator’s Accident/Incident Information Book that are produced by AVP for major air carrier accidents and incidents.

g. Office of Commercial Space Transportation (AST). The Commercial Space Launch Act of 1984, as amended, authorizes the Secretary of Transportation to oversee and coordinate U.S. commercial launch activities. AST is the office responsible for implementing commercial space mishap investigation policy and standards for the FAA. Designated representatives of AST will notify the WOCC in the event of a commercial space transportation mishap. See Chapter 7, paragraph 8 of this order for additional information.

Chapter 3. FAA Investigation Guidelines

1. Overview. This chapter provides guidelines for the purpose of ensuring a thorough investigation. The FAA will assign an IIC to investigate certain events. The FAA IIC leads the FAA’s investigation to ensure that the FAA’s responsibilities are met. This chapter describes: FAA IIC qualifications, training, and responsibilities; FAA investigative participant responsibilities; and FAA investigation techniques, processes, organization and conduct.

2. FAA IIC Qualifications. The minimum qualifications to act as an FAA IIC include all of the following:

a. A working understanding of aviation and/or commercial space practices and procedures.

b. Experience in the aviation and aerospace industry including, but not limited to, experience as a pilot, mechanic, aerospace engineer, air traffic control specialist or civil aviation accident investigator.

c. FAA work experience in the fields of aviation and aerospace safety.

d. Accident investigation training (successful completion of a formal curriculum).

e. OPM Classification 1800 series knowledge, skills, and abilities, or as approved by the AVP-100 division director or his/her designated representative.

3. Training for FAA Personnel Designated to Participate in an Accident Investigation.

a. Transportation Safety Institute (TSI) Courses. The National Aircraft Accident Investigation School, TSI, Mike Monroney Aeronautical Center, Oklahoma City, Oklahoma provides initial training for FAA personnel designated to participate in accident and incident investigations.

(1) Basic accident investigation training includes, but is not limited to the following:

(a) NTSB and FAA regulations, accident reporting, and effective management of resources involved in an aircraft accident.

(b) Fundamental techniques and procedures of field investigations of accidents and incidents such as accident photography, witness interviewing, and investigator safety.

(c) Factors involving operations, airworthiness, crashworthiness, human factors, aircraft performance, powerplant, structures, metallurgy, composite materials, maintenance, weather, design deficiencies, and lessons learned from previous accidents and incidents.

(d) Identification, awareness and mitigation of the hazards associated with working in and around wreckage, including hazards associated with composite materials.

(2) The courses at TSI provide specific training in FAA accident investigation policies and procedures. The AVP-100 division director may approve equivalent training offered elsewhere.

(3) All FAA personnel who may be assigned as the IIC for an aircraft accident investigation must complete the TSI’s introductory course, Basic Aircraft Accident Investigation (Course 00035).

09/17/21 8020.11D CHG 1

(4) All General Aviation Safety Inspectors involved in accident investigation must complete the following courses as soon as practicable:

Page 19 Change 1 8020.11D

(a) Experimental Aircraft Accident Investigation (Course 00498).

(b) Advanced General Aviation Accident Investigation (Course 01042).

(c) Basic Rotorcraft Accident Investigation (Course 00007).

(5) All Air Carrier Aviation Safety Inspectors involved in accident investigation must complete the following courses as soon as practicable:

(a) Aircraft Cabin Safety Investigation (Course 00379).

(b) Advanced Commercial Aviation Accident Investigation (Course 01043).

(6) All Aviation Safety Inspectors should complete the following additional training requirements within 10 years of hire:

(a) Advanced Aircraft Accident Investigation (Course 00003).

(b) Human Factors in Accident Investigation (Course 00008).

(c) Human Factors in Aviation Maintenance (Airworthiness Inspectors) (Course 01005).

(d) Turbine Engine Accident Investigation (Airworthiness Inspectors) (Course 00027).

b. Occupational Safety and Health (OSH) Training. All FAA personnel are required to meet applicable Occupational Safety and Health Administration (OSHA) standards in accordance with their organization’s OSH Program before being assigned any duties associated with physical contact with an aircraft accident site or aircraft parts that have been in an accident. This training must include: Aircraft Accident Investigation (AAIS), Bloodborne pathogen training -- initial course, AVS Bloodborne Pathogen Program and recurrent, Annual Bloodborne Pathogen annually.

Note: Personnel, whose specialty may not take them to the accident site, may still be required to participate in the examination or teardown of contaminated aircraft components and may need appropriate OSHA training.

c. Security Training for Overseas Investigations. AVP-100 investigators should complete State Department sponsored Diplomatic Security Foreign Affairs Counter Threat (FACT) training, or training with similar content, before traveling overseas for investigations.

d. Additional Training Requirements. The AVP-100 division director will designate additional training requirements for AVP-100 investigators as required, based on prior experience and other requirements.

4. General Responsibilities of the FAA IIC. The FAA IIC will:

a. Be responsible for the overall FAA investigation and act as the principal contact for all aspects of the investigation.

b. Provide contact information to the FAA Regional Operations Center (ROC) or the WOCC, ensuring communication with the appropriate FAA offices.

c. Provide the appropriate regional office, and when requested, AVP-100, with timely information of the investigation’s progress.

d. Notify FAA offices if their area of responsibility is involved.

e. Brief regional and/or headquarters (AGC-400) legal counsel on accident issues, as appropriate.

f. Request technical assistance from appropriate FAA offices through the regional Flight Standards division or AVP-100.

g. Act as FAA party coordinator to the NTSB IIC and provide NTSB access to FAA personnel, data, and information (see Chapter 4 of this order).

h. Coordinate the assignment of all FAA personnel to the investigation.

i. Provide leadership to the FAA personnel involved as participants in the investigation. This leadership includes overseeing the welfare and safety of those participants, including the following:

(1) Ensure FAA personnel involved in the investigation are made aware of, and provided upon request, the availability of Critical Incident Stress (CIS) counselors.

(2) Assess the hazards at the crash site to identify the types of personal protective equipment required. Ensure FAA investigation team members have the appropriate protective equipment available, and use appropriate precautions when operating in biohazard and/or other hazardous areas of the site.

(3) Ensure FAA team members have access to food and water.

Note: Eating and drinking in contaminated areas is not permitted. In addition, all personnel shall use good hygiene prior to eating or drinking when they have been in potentially contaminated areas.

j. Ensure the on-scene preservation and protection of evidence and data.

k. Coordinate with manufacturers, as necessary, to facilitate their access to the accident site.

l. Immediately notify appropriate FAA management when violations of Federal Regulations are suspected or discovered.

5. Safety Precautions. Safe investigative practices and common sense safety precautions are of vital importance. Each investigation participant must consider that accident sites are often dangerous, difficult, emotionally challenging and physically demanding. Investigations are often conducted off airport in rough terrain and in severe weather conditions. Therefore, it is necessary to be suitably equipped and physically capable of dealing with the challenges that may be faced. An investigator must:

a. Wear appropriate gloves when handling wreckage.

b. Wear a hard hat when working inside or under wreckage.

c. Use care when working near high pressure vessels such as tires, oxygen tanks, emergency slide bottles, etc. Arrangements should be made to have these items removed or deactivated by appropriate personnel.

d. Ensure that ballistic recovery systems or other explosive devices for aircraft or commercial space transportation vehicles are disabled if they have not been deployed during the accident sequence.

e. Be alert for shifting wreckage due to unstable terrain.

f. Watch for wreckage suspended in trees.

g. Use appropriate protection gear for work in and around biohazard, bloodborne pathogens, burned composite material, radioactive materials, corrosive fluids, fuel and hydraulic fluid. Refer to OSHA and organizational directives for information about exposure control.

h. Seek the advice of local experts such as forest rangers, mountain rescue teams, surveyors, and law enforcement personnel when deciding the type of protective clothing and equipment needed. Consider what site preparations have been completed in regard to site safety and be aware of the dangers posed by local wildlife, insects, plants, terrain, and weather.

i. Take into consideration the effects of fatigue on personal performance and safety throughout the investigation. Adjust the workload to the circumstances; more may be accomplished in a wellorganized 6-hour day than in an unorganized 12-hour day. The quality of the investigation is best served by awareness of the need for mental alertness and physical fitness.

j. Provide for first aid, shelter, food, water and fuel before the need arises. Unexpected weather or equipment failures may isolate the investigation team in remote areas.

k. Ensure the availability of portable oxygen and other emergency equipment when working at high elevations.

l. Use the “buddy system” and a logging in-and-out system for personnel working in remote areas.

m. The use of helicopters at accident scenes inaccessible by other means can be extremely dangerous. Thoroughly coordinate the activity of the helicopter crew and the investigation team.

n. Pay attention to required safety measures when working around heavy equipment.

o. When the crash scene is in water, only assign fully qualified and properly equipped personnel to missions such as underwater recovery and photography.

p. Maintain reliable communications between the investigation headquarters or command post and the various groups working on scene by phone, walkie-talkie, or other communications equipment.

q. For commercial space vehicle mishaps, contact AST for information regarding safety precautions.

r. Report any injury received while on an accident site regardless of severity per OSHA procedures, and provide treatment immediately.

6. Potential Hazards. An investigator should maintain awareness of the hazards associated with the following:

a. Sharp, jagged pieces of metal or composite strands.

b. Sudden shifting of wreckage or terrain.

c. Ice that may break up with little or no warning.

d. Fuel and other flammable agents.

e. Fire (toxic agents may be present in the smoke of a fire).

f. Ignition sources: hot metal, battery (may explode or leak corrosive fluid), ignition wires, electrical power lines, utilities (gas/electricity), grass or wood fire, any explosive or combustible agent.

g. High pressure vessels such as tires, tanks (oxygen, nitrogen) that may explode unexpectedly.

h. Hazardous materials from the aircraft or the scene:

(1) Agricultural chemicals;

(2) Corrosive fluids;

(3) Natural gas lines;

(4) Batteries;

(5) Biological materials; and

(6) Composite materials.

i. Explosive devices, such as aircraft ballistic recovery systems, parachutes, ejection seats, air bags, etc.

j. Pressurized aircraft systems including: Fuel and oil, pneumatic systems, hydraulic fluid, electrical and oxygen systems. Actuation of aircraft controls and switches could cause inadvertent activation of some systems.

k. For accidents involving military aircraft, exercise caution due to the possible presence of ordnance, ejection seats, flares, chaff, jettisoning systems and hazardous chemicals and materials.

l. For mishaps involving commercial space vehicles, exercise caution when investigating space mishaps due to presence of hazardous materials. Contact AST for further information regarding specific hazards associated with commercial space transportation mishaps.

m. Composite fibers: When composites have burned, use only respirators specifically designed to prevent the inhalation of composite fibers. (Information on the use of respirators may be found in 29 CFR Part 1910.134 OSHA Standards, PPE) Floor wax can be sprayed onto the area to contain the fibers. Care should also be taken to protect the skin from penetration from larger composite fibers which can be extremely sharp and rigid.

7. Investigation Equipment. Flight Standards division managers will provide each FSDO in their region with the necessary clothing, biohazard gear, and equipment for accident investigation. The FAA IIC will assure that sufficient biohazard protection gear is on site for FAA use when needed.

a. The diversity of aircraft accidents makes it difficult to have all the necessary equipment available. Certain items commonly used in every investigation should be kept in readiness. Accidents in remote areas require special consideration of the provision for shelter, food, and water. Remember, the investigator's kit has to be carried. Do not overload it with unnecessary or duplicate items. Many improvisations can be made in the field. A suggested, but not necessarily complete, list of items follows.

b. Proper clothing should be the first consideration. Select clothing appropriate to the climate and environment which can withstand rough usage:

(1) Footwear (steel-toed shoes or boots, rubber over-boots, or waterproof boots).

(2) Gloves (leather work gloves and disposable rubber or latex gloves).

(3) Coveralls and/or hooded sweatshirt and coat or jacket.

(4) Headgear (hardhat, stocking cap, and/or FAA hat).

c. The following items are required to ensure the health, comfort, and safety of the investigator:

(1) Canteen, thermos, and/or sports drinks containing electrolytes needed to maintain good chemical balance in the body and avoid dehydration.

(2) Sunglasses and safety goggles.

(3) First-aid kit, snakebite kit, and first-aid instructions.

(4) Insect repellant, lip balm and sunscreen lotion.

(5) Candy bars, gum, cookies, or other quick-energy foods.

(6) Mentholated ointment (for topical application near nose to dispel strong odors).

d. The following items are commonly used to perform the technical aspects of the investigation:

(1) Handheld Global Positioning Satellite (GPS) receiver.

(2) Cell phones with GPS and Hi-definition cameras, if permitted.

(3) Magnetic compass, small protractor, and Abney level to measure angles of impact.

(4) Measuring tape (50-foot or longer) and 6-inch ruler to be used to depict the scale of items that are photographed.

(5) Magnifying glass (10X or stronger).

(6) Marking pens, grease pencils, and chalk sticks.

(7) Hand-tools including screwdrivers, pliers, adjustable wrench, tin snips, vice grip.

(8) Flashlight with spare batteries.

(9) Camera, flash attachment, and spare batteries.

(10) Digital recorder, spare batteries.

(11) Power adaptors and equipment chargers.

(12) Notepad, clipboard, ruled paper, graph paper, pencils, and pens.

(13) NTSB and FAA accident report forms.

(14) Parts tags with string or wire (such as NTSB Forms 6120.15 and FAA Form 8020-2).

(15) Passenger and Witness Statements for interviews.

(16) FAA Order 8020.11, 49 CFR §830 and 49 CFR §831 of NTSB regulations, and ICAO Annex 13, as appropriate.

(17) Grid, county or state highway maps and sectional (navigational) charts.

(18) Clean containers for fuel and oil samples.

(19) Wire, tape, string, or nylon cord to tie and/or secure items.

(20) Toxicology mailing kit, also known as the “Tox Box.”

(21) Small handheld mirror to look inside inaccessible locations.

(22) Small wire or stiff-bristled brush.

(23) Plastic bags (various sizes for small parts).

(24) Biohazard equipment (per OSHA requirements).

8. Sharing of Investigative Information within the FAA.

a. During the course of an accident/incident investigation, FAA participants in the investigation will gather factual information related to the circumstances and people involved in that accident/incident. Uncontrolled or in-appropriate release of that information outside the investigation may be contrary to privacy laws, Federal statutes, state or local laws, or agency policy. In addition, inappropriate release of such information could have a chilling effect on future investigations. For this reason, all information derived from an accident/incident investigation must be carefully controlled.

b. It is important to understand; however, that the “party” to any investigation is the FAA, not just the individual participant. Some important information obtained during an investigation should be communicated to individuals or offices within the FAA that have a bona-fide safety need to know. For example, a finding that a certified aircraft has a flaw affecting its airworthiness must be communicated to the responsible Aircraft Certification Office as soon as possible.

c. All FAA participants involved in an accident/incident investigation must coordinate release of information from the investigation with the FAA IIC. Any questions should be directed to AVP-100 prior to release.

Note: See Chapter 4 paragraph 20 for additional procedures when an ATO Event Response Team is also conducting an investigation on site.

9. Public Release of Information and Media Inquiry. The FAA IIC will not release any accident or incident information outside of the investigation, as the release of the information could interfere with the investigation efforts. The FAA does not restrict the release of information between individuals or organizations that are part of the investigating team.

a. Refer media requests for information to:

(1) NTSB IIC or NTSB Public Affairs Office.

(2) Regional FAA Public Affairs Office or FAA Headquarters Office of Communications.

b. Release of accident and incident information to members and staff of the U.S. Congress is the responsibility of the organization conducting the investigation. For the FAA, the Office of Government and Industry Affairs (AGI) will provide the control point to answer and coordinate the release of information to the Congress.

10. Initial Actions at the Accident Scene. Refer to the following list of items that need to be accomplished immediately upon arrival at the accident scene. When the FAA IIC’s travel time will

not allow arrival to the accident scene within a reasonable time, telephone calls should be made to relay FAA/NTSB concerns to the on-scene public safety official (sheriff, police, etc.).

a. Ensure the site is secure:

(1) Establish contact with local law enforcement officials and request accident scene security by such officials if it has not already been done.

(2) Monitor accident site security. Ensure that only authorized personnel are allowed access to the accident scene.

b. Consider site safety biohazards, hazardous materials and aircraft ballistic parachute recovery systems. If hazards exist, secure and control access to the accident site, and:

(1) Coordinate with the NTSB IIC (if on-scene), first responders and local authorities to determine the area of possible contamination, and to place a biohazard placard on wreckage nearest the most visible entry to the biohazard area.

(2) Brief all FAA participants on the biohazard nature of the accident site, the requirements for personal protective equipment at the site, and the personal prohibitions that are to be applied during the investigation in the biohazard areas.

(3) Identify investigative tasks needing personal protective equipment, and the extent of use of that equipment. Arrange for the availability of personal protective equipment for all FAA personnel requiring it, and coordinate disposal of used personal protective equipment.

Note: Flight Standards is the resource for personal protective equipment for all FAA personnel. The FAA is not responsible for furnishing personal protective equipment to participants other than FAA personnel.

c. Document perishable evidence such as ice, snow, moisture, fuel, etc.

d. Ensure that wreckage, mail, or cargo is not disturbed or moved except to the extent necessary to:

(1) Remove persons injured or trapped;

(2) Protect the wreckage from further damage; or

(3) Protect the public from injury.

e. When it is necessary to move aircraft wreckage, mail, or cargo:

(1) Make sketches, descriptive notes and/or take photographs if possible, of the original positions and conditions of the wreckage and any significant impact marks.

(2) Arrange to have cargo/luggage put in a secure area for weighing.

(3) Arrange for preservation/storage of the wreckage.

f. Enlist the cooperation of local authorities to obtain comprehensive photographic documentation of human remains prior to removal, if practical. If local authorities remove remains before photographic documentation can be accomplished, the investigator should note the location of the remains and describe the injury(s).

g. De-activate the emergency locator transmitter (ELT).

h. Preserve flight data and cockpit voice recorder data. Ensure that power is cut to the recorders so that any recorded data is not destroyed or compromised. If any team member locates the recorders then the FAA IIC must ensure that they are secured. Do NOT attempt to download data from flight recorders without further consultation with the NTSB or AVP-100.

i. Verify that the ROC notified the NTSB and the WOCC.

j. Acquire a point of contact for local law enforcement and the local coroner to:

(1) Determine autopsy status.

(2) Coordinate collection of biological material for toxicological studies.

(3) Provide toxicological boxes for shipment of biological material to CAMI.

(4) Contact the CAMI Autopsy Team (AAM-610) through the ROC at (817) 222-5006, for assistance if you have any difficulty coordinating autopsies with local authorities. Please give pilot and crew member names to the CAMI Autopsy Team as soon as possible.

k. Obtain names, addresses, and telephone numbers of witnesses from law enforcement officers.

l. When any team member recognizes evidence of an explosion or criminal activity, do not allow anyone to disturb the wreckage (except for the removal of survivors) until the arrival of the appropriate Federal law enforcement agencies. Critical evidence could be lost if such wreckage is disturbed.

11. Organization and Conduct of the Field Phase of the Investigation.

a. General Considerations.

(1) Establish a command post. If the NTSB is on-scene, use their on-scene headquarters as appropriate.

(2) If emergency corrective actions for flight safety are needed, contact the appropriate FAA office and AVP-100 via the WOCC.

(3) Consult with the respective regional air traffic organization and/or AVP-100 to determine the need for, and the extent of, an ATC facility flight inspection.

(4) When air traffic services were involved and/or provided to the accident aircraft, the FAA IIC may request copies of surveillance data and voice communications from the air traffic control facility(s) by contacting the appropriate air traffic service center through the WOCC. In some cases,

although ATC did not provide services to the accident aircraft, the aircraft may have been within surveillance coverage and ATC may be able to produce surveillance data for the investigator.

(5) When a navigational facility was or may have been involved in an accident or incident, the FAA IIC should notify the Technical Operations Aircraft Accident representative (TOAAR) and make a final decision on whether or not a flight inspection of a navigational facility involved or suspected of being involved in an accident or incident is needed. The decision to request a flight inspection is to be based solely on safety concerns and not on economic factors. After a decision has been made, the TOAAR will assist the IIC in coordinating the flight inspection. See FAA Order JO 8020.16, “Air Traffic Organization Aircraft Accident and Incident Notification, Investigation, and Reporting” for further guidance.

(6) The FAA IIC may contact the local FSDO or region with requests for information, equipment, or personnel to assist in the accident investigation. Offices will provide the requested information and assistance by the most expeditious means available.

b. FAA Organizational Meeting. Before the accident scene familiarization visit, the FAA IIC should hold an organizational meeting for all FAA participants. The purpose of the meeting is to define the FAA’s responsibilities, procedures, and objectives, and to establish what is expected of the FAA participants. The IIC should assure that the FAA participants are made aware of basic expectations.

c. Investigative Organizational Meeting. Before or after the accident scene familiarization visit, and in the absence of an NTSB IIC, the FAA IIC should hold an organizational meeting for the entire investigative team. The purpose of the meeting is to define the responsibilities, procedures, and objectives for the investigation. The investigative organizational meeting for most accidents may be an informal conversation involving an FAA IIC and one or more of the following:

(1) FAA participants.

(2) Aircraft operator/owner.

(3) Manufacturer representatives.

d. Accident Scene Access. Review statutes and regulations under (see Appendix A of this order) which FAA personnel may demand immediate access to the accident scene when conducting FAA inspections or participating in NTSB accident investigations. If the investigator confronts a person who resists granting access or has difficulty gaining access to inspect and photograph the accident scene, inform the person of the following:

(1) Quote from or refer the person(s) refusing the inspection to 49 U.S.C. §40113(a), which states that the FAA has the legal authority to conduct aviation investigations on behalf of the Secretary of Transportation (see Appendix A of this order). Aircraft accident investigations are a Federal matter and no lower authority has any legal or other right to hide the wreckage or refuse access to it for as long as access is required per 49 U.S.C. §1155(b).

(2) The U.S. Government (NTSB) has the right to take custody of the wreckage, per 49 CFR §830.10.

(3) If the resisting person still does not grant access to the scene, the investigating FAA IIC should immediately notify the NTSB IIC and their FSDO manager who will contact the Chief Counsel’s office to take legal action to secure access and institute enforcement proceedings. The Chief Counsel’s office should also notify the appropriate NTSB elements of the progress of such situations.

(4) If the FAA IIC is unsure of actions to take to deal with uncooperative agencies or individuals, contact supervisory personnel or AVP-100 for guidance.

e. IIC Credentials for Access to the Accident Scene. The FAA IIC must have at least one of the following credentials to gain access to the accident scene:

(1) Qualified Flight Standards personnel: FAA Form 110A, Aviation Safety Inspector’s Credential with numbered Aviation Safety Inspector Badge.

(2) Office of Accident Investigation and Prevention, AVP-100 personnel: FAA Form 8020-20, Aviation Safety Investigator’s Credential and numbered Air Safety Investigator badge.

(3) For commercial space mishaps occurring on a Federal launch range, coordinate with AST to arrange for the necessary security access and badging. AST maintains field offices at Patrick Air Force Base, FL (serving Cape Canaveral Air Force Station and Kennedy Space Center), Vandenberg Air Force Base, CA, and Wallops Flight Facility, VA. AST can also arrange for any necessary access to operator facilities.

f. Accident Scene Access for FAA Personnel. FAA personnel not specifically assigned as participants or support personnel must not be present at the scene of an accident without the knowledge and consent of the FAA IIC.

g. Initial Photography.

(1) Prior to moving or disturbing the wreckage, photograph the accident scene including the path the aircraft took to get to its final resting place and any impact scars.

(2) Printed labels placed in the photographed scene (#1, #2, L, R, South, West, etc.) should be used to ensure detailed and permanent records of identification and orientation. Document these views while walking in a circular fashion to ensure that a 360-degree view of the main wreckage scene is completed with a series of 6 photographs; i.e., 12, 2, 4, 6, 8, and 10 o’clock positions. If possible, mark photographs to be easily identifiable (direction of flight, forward, aft, left, right).

(3) Take photographs of any major structural component or flight controls no longer attached to the main wreckage. Additionally take photographs of the following:

(4) External “macro” views of the main body of the wreckage.

(5) Surrounding terrain.

(6) Ground scars leading up to the wreckage.

(7) Tree strikes or other object damage (if any).

(8) Airframe ice (if any is adhering to leading edges of aerodynamic surfaces).

(9) Wings and tail.

(10) Control surface positions.

(11) Control surface actuator positions (if possible).

(12) Trim tab settings (cockpit indications and also airframe trim tabs/actuators).

(13) Flap and flap lever positions.

(14) Landing gear and lever positions.

(15) External views of engine(s) and associated engine controls.

(16) Turbocharger ducting and clamp positions (if installed).

(17) Control cables and associated hardware (marked prior to being cut by recovery personnel).

(18) Overall view of cockpit.

(19) Close-up view of cockpit instruments (no more than 4 instruments to a photograph).

(20) Electrical switch positions and circuit breakers.

(21) Throttle quadrant.

(22) Fuel selector switch.

(23) Magneto switch position(s).

(24) Seat belts.

(25) Medications, medical devices, or drugs and other substances found on site should be handled the following way:

(a) Photograph bottles and packages;

(b) Photograph close-up views of individual pills including both sides of pills;

(c) Document relative size of pills by taking photos next to a common object of known size such as a ruler or coin;

(d) Forward photos and descriptions of medications or medical devices to the CAMI Medical Case Review Physician for analysis; and

(e) For fatal accidents the information can be forwarded via the Autopsy Team for analysis.

h. Additional Documentation. Further documentation by notes, measurements, etc., is necessary to complement even the most thorough photographic coverage.

(1) Obtain names and contact information of critical personnel on-scene.

(2) Check with first responders such as fire department, rescue, and law enforcement personnel for photo or other documentation of the wreckage scene and cockpit area. Some movement of switches and other debris usually takes place during the initial effort to rescue victims and/or retrieve human remains.

(3) Collect contact information of all witnesses and first responders for interviews and/or statements.

(4) Collect video evidence. Many accidents are captured on video surveillance and security cameras and devices located near the accident site. The value of this evidence is often critical. Reach out to local businesses, government facilities, airport tenants and private residences near the accident site to obtain this video evidence.

(5) Document the following:

(a) Wreckage distribution.

(b) Distribution of human remains, cargo, and aircraft contents.

(c) External flight control positions (rudder, elevator, ailerons, flaps, slats, spoilers, stabilizers, trim tabs).

(d) Cockpit flight control indications.

(e) Cockpit instrument reading and switch positions.

(f) Abnormalities in cabin and cockpit areas.

(g) Global Position System (GPS) or latitude/longitude coordinates of the main wreckage and the location or direction and distance from the main wreckage of any major structural component or flight control that is no longer attached to the main wreckage.

(h) GPS or latitude/longitude coordinates or distance and bearing from main wreckage of ground scars and any other identifying marks including environmental damage.

(i) Fuel and other fluid quantity. Note the location from which any fuel is drained. Look for correct fuel color indicating octane, the presence of water or other contaminants in fuel taken from the fuel tank or gascolator.

(j) Condition of all visible fuel, lubricant and pneumatic lines.

(k) Evidence of fluid leaks (fuel, oil, hydraulics).

(l) Spark plug or ignition leads (condition, attached or detached).

(m) Aircraft configuration (flap position, landing gear, etc.).

(n) Possible explosives (batteries, ballistic recovery parachute systems, etc.).

Note: Before attempting to gather samples from military aircraft or space launch vehicles, contact the Office of Commercial Space Transportation (AST) or the appropriate military branch. Fuel or oxidizer may be a hazardous material and such vehicles may have explosive devices on board.

12. Examination of Evidence. During the investigation, certain evidence will require more detailed examination. The investigator should consider the following factors during deliberations:

a. Missing structures: wing or horizontal stabilizer tips, propeller or rotor tips, missing flight control surfaces: rudder, elevators, flaps, stabilizers, spoilers, slats, tabs, etc.

b. Pre-impact versus post-crash fire evidence.

c. Metal fatigue versus instantaneous fracture.

d. In-flight versus impact fracture.

e. Overloading or out of center of gravity evidence.

f. Evidence of aircraft attitude at impact.

g. Controlled versus uncontrolled attitude at impact.

h. Engine power at impact.

i. Systems operation before impact.

j. Flight control problems.

k. Evidence of an explosion, pre or post impact.

l. Cockpit documentation (switch position, etc.).

m. Evidence of impact before final contact with terrain: trees, wires, buildings, terrain, poles, other obstructions.

n. Witness statements.

o. Aircraft performance.

p. Devices that record aircraft and crew performance data (FDR/CVR, cockpit display electronic memory circuit chips, GPS, flight data monitoring avionics, etc.).

q. Air traffic control surveillance data.

r. Air traffic control recorded communications with aircraft.

s. Air traffic services.

t. Survival factors.

13. Collection of Witness Statements and Witness Interviews.

a. When NTSB investigators are in charge of the on-scene investigation, they will conduct survivor and witness interviews and obtain statements. Refer to Chapter 4, Paragraph 16 of this order for the NTSB interview process.

b. For accidents in which the NTSB is not on-scene, the FAA conducts witness and survivor interviews. FAA personnel are to use plain stationery for obtaining statements. Do not use NTSB forms.

c. Obtain the name and contact information of the witness.

d. The investigator may obtain a written statement from the witness, or record in writing what the witness provides verbally:

(1) Written Statements. When taking a written statement in person, a good practice is to have the witness provide an oral account first. This gives the inspector an opportunity to identify the significant aspects of the witness’s testimony.

(2) Oral Statements. A witness may refuse to provide a written statement, but be willing to provide an oral testimony. In this case, the inspector should preface the written account of an oral statement with a brief explanation regarding the witness (e.g., name, age, location at the time of the event), and a statement indicating that the witness declined to provide a written statement. A recording device may be used provided that the witness gives consent. Indication of the consent must be included with the introductory statements at the beginning of the recording. The inspector should have a third person present for confirmation of the written account of the oral statement, and should ensure the third person signs the statement, certifying it to be what the witness stated.

e. Good interviews depend largely upon the interviewer. The interviewer’s words, actions, and attitude can determine to a large extent the tone and effectiveness of an interview. Most witnesses are willing to tell what they know when they are informed that the information is to be used to prevent similar accidents.

(1) The qualifications of witnesses should always be considered. Let the witness describe what he/she heard, saw or felt, before asking specific questions.

(2) It can be helpful to provide the witness with a small model or toy aircraft to help the witness show what he/she saw the aircraft do. Terms such as barrel roll, slip, skid, bank, roll, turn, spin, etc., may then be more accurately demonstrated by the witness. This is especially helpful for witnesses who are not experienced with aviation terminology.

(3) Avoid leading the witness. When in doubt, be quiet and let the witness speak. The investigator may ask clarifying questions but should avoid introducing new information.

f. When medical aspects appear to be involved, statements from the family physician, other professional sources, and relatives or close associates of the pilot should be obtained. In the event of fatal accidents, a copy of these statements should be forwarded to the CAMI Medical Case Review Physician via the Autopsy Team.

14. Post-Accident and Incident Autopsy and Drug Testing. The investigator should arrange autopsies for fatal victims who could have been controlling the aircraft. The investigator must also arrange for post-accident and incident drug and alcohol testing in accordance with current DOT and FAA directives.

a. Contact local law enforcement for drug and alcohol testing per 14 CFR §91.17 for nonfatal 14 CFR Part 91 operations (with the exception of sightseeing operators defined in 14 CFR §91.147).

b. Ensure that commercial organizations perform the necessary post-accident drug and alcohol testing in accordance with the FAA-mandated testing program. Commercial operations that conduct 14 CFR Part 121, 135 or sightseeing tours as defined in 14 CFR §91.147 must comply with the drug and alcohol testing regulation 14 CFR Part 120. Direct all questions concerning the requirement to test under Part 120 to the Drug Abatement Division, AAM-800, at (202) 267-8442 or [email protected].

c. Refer other post-accident/incident drug testing questions to AAM-610, at (405) 954-2824 or (405) 954-6976.

d. Coordinate autopsies and toxicological testing of fatalities of those on board the aircraft with medically qualified local officials under the authority delegated by the Administrator. Designated aviation medical examiners (AMEs) cannot perform this function. The local coroner/medical examiner will usually conduct an autopsy on deceased flight crew.

e. Contact the local coroner/medical examiner to ensure that the bodies are not embalmed until after the autopsy and/or specimen collection can be accomplished.

f. Arrange, as necessary, for autopsies taking into consideration provisions of local law and religious beliefs.

g. Contact the CAMI Autopsy Team (AAM-610) through the FAA’s Central Service ROC at (817) 222-5006, for assistance, as necessary. If the medical examiner or coroner would like to discuss payment for autopsy services, please refer the inquirer to the autopsy team.

h. Contact the NASA Flight Crew Surgeon for commercial space mishaps where the airman is a NASA Astronaut.

i. Coordinate the use and shipment of the “Tox Box” to the Forensic Toxicology Research Team.

(1) The Forensic Toxicology Research Team detects and measures drugs, alcohol, toxic gases, and toxic industrial chemicals in victims of fatal aircraft accidents as a contribution to the analysis of accident causation:

(2) FAA External Specimen Chain of Custody. Form AC 8025-3 is available on the Bioaeronautical Sciences Research Lab website (http://www.faa.gov/go/toxlab). Page two of the form (Accident Information) can be completed from the PDF file on the website and emailed to 9-AMC­ [email protected] instead of giving the information over the telephone. Both pages can be data entered from the website, but the first page, FAA External Specimen Chain of Custody, must be printed out, signed, and sent with the tox box.

(3) Notify the Bioaeronautical Sciences Research Lab that a tox box is being shipped, by calling telephone number (405) 954-6254. The office will provide a shipping vendor account number for shipping the tox box.

(4) A copy of the FAA External Specimen Chain of Custody form may also be emailed but is not required.

15. Airman, Medical and Aircraft Records. Requests for FAA Airman, Medical and Aircraft records by the FAA IIC should be processed as follows:

a. FAA Medical Records:

(1) For deceased airmen: A copy (Blue Ribbon) of a deceased airman’s FAA medical history may be obtained from the Aerospace Medical Certification Division, AAM-300. The certified Blue Ribbon copy of the medical record may also be shared with the NTSB by the FAA IIC for deceased airmen only. (See Chapter 4, paragraph 18 of this order)

(2) For living airmen: As a general rule, the FAA is prohibited from releasing the medical records of any living person without the individual’s consent. However, in the context of an accident or incident investigation, information contained in medical records may be relevant to aviation safety. The FAA IIC should contact AAM-300 or AVP-100 in these cases.

Note: If the NTSB requests access to the FAA medical records of living airmen, see Chapter 4, paragraph 18 of this order for guidance. An NTSB investigator or an NTSB medical officer may review, but not copy, a living airman’s medical record at FAA headquarters and only under the supervision of the Federal Air Surgeon or his designee.

b. FAAAirman Records. A certified copy (Blue Ribbon) of the airman’s FAA certificate history may be obtained from the Airman Certification Branch, AFB-720.

Note: If the NTSB requests records of living airmen, see Chapter 4, paragraph 18 of this order. Airmen certification records may be mailed to NTSB, but only to NTSB Headquarters in Washington, DC or one of the four NTSB Regional Office facilities.

c. FAAAircraft Records. A certified copy (Blue Ribbon) of the aircraft historical records (airworthiness/registration) may be obtained from the Aircraft Registration Branch, AFB-710. These records may also be provided to the NTSB.

16. Handling of Wreckage Prior to Removal.

a. To avoid post-crash damage, do not rotate the propeller or any other components. Avoid pulling flight control cables, trim cables, and engine control cables before documenting cockpit controls unless there is a specific investigative purpose.

b. Do not physically match broken pieces back together. Protect the ends of failed major structural components from further damage so that a laboratory examination may determine the failure characteristics of the damage from the fracture surfaces.

c. Consider delaying the disassembly of components in the field due to the potential loss of evidence or further damage. However, depending on the circumstances of the accident and the availability of time and resources, component disassembly at the site may be prudent and appropriate.

d. Remove electronic (digital) components only after documenting their external physical condition and utilizing manufacturer guidelines, when available. Try to preserve all cables and connections in their original state.

Note: Many avionics and electronic equipment and systems, including digital engine controls, GPS navigation devices, communication radios, primary and navigation flight displays, etc., contain nonvolatile or battery-powered memory that may be accessed for retrieval of event data that is useful for the investigation. Do not attempt to “power up” these types of equipment in the field. Some avionics and electronic equipment need to be downloaded in a controlled environment, such as at the manufacturer’s laboratory or the NTSB Flight Data Laboratory to avoid the possibility that data may be lost or overwritten when power is applied. When in doubt, seek the guidance of the AVP-100 or the NTSB IIC.

e. If any cockpit elements such as engine control levers, valves, or electrical switches were moved during the recovery process, the investigator should document the movement photographically or in written notes.

17. Preparing Contaminated Parts for Further Examination. Ideally, all parts that are examined away from the accident scene should be cleaned and disinfected before they are transported. If it is permissible to decontaminate parts, a disinfectant or a 10-percent solution of household chlorine bleach should be applied to all exposed areas. However, cleaning and disinfecting can destroy evidence or damage parts; so it may be necessary to transport contaminated parts.

a. Wait a minimum of 30 minutes (or as directed by the manufacturer's disinfectant instructions) before handling the parts with uncontaminated gloves when applying an EPA-registered disinfectant or a 10-percent solution of household chlorine bleach to contaminated parts.

b. Use appropriate personal protective equipment in preparing parts for transport. Use padding to protect personnel and preserve evidence on all sharp-edged parts. Use protective equipment in addition to waterproof latex/nitrile-type gloves and work gloves as required depending on the size of the part and environmental conditions.

c. Put contaminated sharp objects that are to be transported in appropriate containers separate from non-sharp contaminated objects.

d. Use approved shipping containers (identified during training) and label as “Biohazard” to ship contaminated parts.

18. Concluding the Field Phase of the Investigation. Consider the field phase of the investigation to be complete when all relevant or required information has been documented. Once the FAA IIC decides to end the field investigation, certain obligations and responsibilities must be considered:

a. If the NTSB did not travel to the accident scene, the FAA IIC must notify the NTSB IIC when the field portion of the investigation is completed.

b. Document receipt and retention of aircraft parts using FAA Form 8020-2, Aircraft/Parts Identification and Release Tag.

c. Notify parties to the investigation of associated investigation projects.

d. Release FAA participants.

e. Establish a target date for completion of the accident report.

f. Coordinate release of the wreckage by NTSB (with the exception of components retained for further examination).

g. Arrange for the resolution of financial obligations regarding guard services, services of personnel hired to assist in the investigation, rental equipment, damage to private property, communication facilities, and storage and transport of wreckage.

Note: For all accidents, including those in which NTSB does not travel, NTSB will ensure the resolution of financial obligations for guard services, personnel hired to assist in the investigation, rental equipment, damage to private property, communication facilities, and storage and transport of wreckage. Do not commit any funds before contacting the NTSB for funding authorization.

h. The FAA IIC (if the NTSB IIC is not on scene) coordinates disposal of the regulated biohazard waste.

19. Retention and Examination of Aircraft Parts.

a. Title 49 U.S.C. gives the FAA the authority to examine and test aircraft parts as reasonably necessary when conducting investigations. The FAA IIC, in coordination with the NTSB IIC, should obtain the parts directly from the owner or the owner’s authorized representative. The FAA is not obligated to reassemble the components, but is obligated to pay for the return of the parts to the owner.

b. The sending office should:

(1) Coordinate with the owner of the aircraft/parts when possible, before disassembly of any parts or components.

(2) Not disassemble or clean the parts when parts such as instruments, avionics, carburetors, magnetos, or electrical parts will be sent to a facility (manufacturer, laboratory, etc.) for analysis.

(3) Carefully package and ship the parts in the “as found” condition.

(4) Tag each part with FAA Form 8020-2, “Aircraft/Parts Identification and Release Tag.”

(5) Ensure that each copy contains the NTSB accident investigation case number.

(6) Attach the signed cardboard copy securely to the part.

(7) Retain a signed copy.

(8) Give the original form to the owner or the owner’s representative.

(9) Include information to contact the NTSB and/or FAA representative before opening or processing the package.

(10) Include the following information on the carrier’s bill of lading under “description of articles.” Make, model, and aircraft identification number; location and date of event; part name and number.

(11) Contact the designated FAA representative before sending the part to provide the part’s expected time of arrival, and to arrange for the representative’s participation as needed in the processing.

(12) Do not expose the parts to public view. Large or heavy parts should be boxed or crated.

(13) Ship the parts in accordance with any guidance from the Aircraft Certification Office (ACO) responsible for that product’s design approval directs. Properly identify the parts in a Letter of Transmittal that briefly describes the accident and the reason for the examination.

20. Release of Aircraft Wreckage and Parts.

a. For FAA investigated accidents or incidents, use FAA Form 8020-2, “Aircraft/Parts Identification and Release Tag” to release the aircraft or any of its parts to the registered owner. Do not use NTSB Form 6120.15, “Release of Aircraft Wreckage and Receipt of Aircraft Parts.”

b. For NTSB investigated accidents or incidents, see Chapter 4, paragraph 23 of this order.

21. Destroyed Aircraft. If the aircraft was determined by NTSB to be destroyed in the accident, advise the Aircraft Registration Branch (AFB-710) in Oklahoma City, Oklahoma, in writing, that the aircraft was destroyed.

22. Completion and Distribution of FAA Form 8020-23, “FAA Accident/Incident Report.”

a. AVP-100 requires the collection of specific information necessary from all FAA IICs during an accident/incident investigation to ensure adequate factual and analytical data is recorded. This information is collected via FAA Form 8020-23, “FAAAccident/Incident Report.”

b. FAA Form 8020-23 will be completed by the FAA IIC and entered into ATQA within 30 calendar days of notification of an accident/incident. Upon completion, the 8020-23 will be submitted

via ATQA to AFS-620, Aviation Data Systems Branch, for a final data quality assurance (QA) review of the information collected prior to the form being moved from ATQA to the FAA Accident/Incident Database System (AIDS) Source. AFS-620 QA personnel may contact the reporting IIC or FSDO POC to discuss recommended amendments needed during the QA review in order to obtain the most accurate and complete data.

c. When new information about an accident/incident is discovered, or if corrective action is required for an existing 8020-23 previously submitted to AFS-620, an amendment to the original 8020-23 shall be completed in ATQA using the amendment process. The amended 8020-23 should only contain the updated and/or corrected information. The amended 8020-23 form will then be submitted through the original distribution process from the IIC to the FSDO POC for an additional FSDO review prior to it being distributed via ATQA for its final AFS-620 QA review.

Note: FAA Form 8020-23 reports will remain accessible in ATQA for a period of 365 days after the original or amended date in order to permit the FAA IIC to make any additional amendments. Reports exceeding the 365-day retention time in which an amendment is needed will require a new 8020-23 report to be completed in full, including the basic identifying information in addition to the amended data. Once received by AFS-620, the amended report will replace the original report to prevent duplication of reports.

d. At any time assistance or clarification is needed during the completion of an 8020-23 report, please contact AFS-620 at [email protected].

e. If an accident is downgraded to an incident, an amended FAA Form 8020-23 must be submitted by the FAA IIC.

f. Copies of FAA Form 8020-23 reports are obtainable by filing a Freedom of Information Act (FOIA) request and may be released only with permission of AFS-620 and AVP-100.

g. The completion of FAA Form 8020-23 for any accident/incident investigation does not take the place of malfunction reporting via FAA Flight Standards documentation such as Service Difficulty Reports (SDRs), etc., or any reporting that is normally documented via the Program Tracking and Reporting Subsystem (PTRS).

h. Deficiencies identified during the investigation that are related to the FAA’s nine areas of responsibility must be annotated on FAA Form 8020-23 report with a very brief factual description of the deficiency. It is incumbent on the inspector or investigator to determine whether or not corrective action is needed.

i. For U.S.-registered aircraft accidents that occur in foreign countries, the FAA technical advisor to the U.S. Accredited Representative will complete FAA Form 8020-23 (blocks 1 through 20 only) within 30 calendar days of notification.

23. Destruction of Documents and Information. Destroy all documents related to the accident in accordance with FAA document retention policies, found in FAA Order 1350.14B, “Records Management.”

24. Accident Investigations Involving FAA or NTSB Personnel and Flight Operations.

a. The NTSB must investigate all accidents and reportable incidents involving FAA aircraft or crewmembers.

(1) An FAA aircraft is defined as any aircraft, which is owned, leased, under military bailment, rented by the FAA, or operated by FAA personnel when in an official FAA capacity.

(2) In the case of an accident or reportable incident involving an FAA Flight Program aircraft, AVP-100 will assign the FAA IIC.

Note: FAA Flight Program aircraft do not include aircraft rented by an FAA employee for routine travel as per the FAA travel policy regarding travel card use and voucher reimbursement.

(3) AVP-100 is responsible for clearly identifying FAA’s role in an accident involving an FAA Flight Program aircraft (e.g. FAA crewmember, FAA aircraft, or job task aircraft with FAA on board), and for conveying this information to the NTSB.

(4) If during any NTSB investigation of an FAA Flight Program aircraft operation (to include owned, leased, and rented), and the NTSB authorizes the aircraft’s owner/operator as a party to the investigation, ATO Flight Program Operations will serve as a party to the investigation as the aircraft owner/operator (independent of the role of AVP-100 in the investigation).

(5) The FAA must participate in the NTSB investigation of all FAA aircraft accidents and incidents in the same manner as in the NTSB investigation of civil aircraft accidents and incidents.

b. The FAA must investigate all accidents and incidents involving aircraft piloted by NTSB personnel. The investigations will be conducted by AVP-100 investigators.

25. FAA Safety Recommendation Program.

a. The main purpose of accident and incident investigation is to determine how and why they occur, and prevent such events in the future. The natural next step in the safety process is the development of recommendations, actions, and strategies that can mitigate or eliminate the factors found to be directly or indirectly related to the cause of the event.

b. The FAA Safety Recommendation Program is one of the processes used to identify and correct safety deficiencies in the NAS and on U.S. manufactured aviation products used internationally. FAA inspectors and investigators, by virtue of their qualifications and aviation experience, objectively examine the facts, conditions, and circumstances of an accident or incident. They also identify and submit safety recommendations using procedures outlined in FAA Order 8020.17, “FAA Procedures for Handling FAA and International Safety Recommendations.” Inspectors, investigators, and all other FAA personnel should be alert for issues that warrant corrective actions, whether they arise during an investigation, surveillance, or other duties.

c. Information on submitting a Safety Recommendation and the Safety Recommendation process can be obtained from the AVP Safety Recommendation Branch (AVP-420). Refer to FAA Order 8020.17, “FAA Procedures for Handling FAA and International Safety Recommendations.”

This order prescribes uniform agency procedures and responsibilities for submitting and responding to aviation-related safety recommendations made by an FAA employee or by an international State aviation authority. It also provides direction and guidance for processing the safety recommendations, including the submittal, receipt, review, and coordination of the FAA’s response letter to the recommendation.

d. The submitter of a safety recommendation should also consider coordinating the identification and proposed resolution of any unsafe conditions with the Office of Accident Investigation and Prevention to further enhance situational awareness and to facilitate a more streamlined response. To fully address the issues identified, the offices that are assigned safety recommendations must address each with the thoroughness necessary to respond to the deficiency or to propose alternate actions.

Chapter 4. NTSB Investigation Guidelines

1. Overview. Title 49 U.S.C. §1132 provides for the appropriate participation of the FAA in NTSB investigations (see Chapter 2, Paragraph 1 of this order and Appendix A). This chapter describes the coordination between the FAA and the NTSB during an NTSB-led investigation. The technical aspects of an accident/incident investigation are found in Chapter 3 of this order. This Chapter describes the coordination between the FAA and NTSB during an NTSB-led investigation.

2. Organization of the Investigation. The NTSB conducts investigations using a party system. The FAA is automatically granted party status to all NTSB investigations. Other parties may include aircraft manufacturers, operators or other organizations that can contribute to the investigation. Participants will be organized into groups such as: aircraft operations, maintenance, human factors, recorders, etc. FAA personnel, led by the FAA IIC as the FAA party coordinator, may be assigned to participate in any of these groups.

3. NTSB Investigation Authority. The NTSB investigates accidents in accordance with Title VII of the Federal Aviation Act of 1958 and the Independent Safety Board Act of 1974, as amended; and serious incidents, to determine probable cause. The NTSB also has additional responsibilities.

a. The NTSB is responsible for the organization, conduct, and control of all accident and incident investigations involving any civil aircraft or certain public aircraft within the U.S., its Territories, Possessions, and those that occur outside the U.S. when the accident/incident is not in the territory of another country, i.e., in international waters. (See Appendix A, Parts 2 and 3 of this order).

b. The NTSB is responsible for supporting accident/incident investigations that occur outside the U.S. and its Territories which involve U.S. manufactured/operated aircraft in accordance with ICAO Annex 13 Accident Investigation agreements.

c. In most instances involving non-fatal accidents, the NTSB will not to travel to the accident scene to conduct its investigation, and will rely on the FAA to document the scene.

d. Because both the NTSB and the FAA have independent statutory authority, as well as differing statutory rules and mandates, differences in the requirements of the two agencies may arise during an accident or incident investigation. The FAA will comply with 49 CFR §831.5 and not interfere with the NTSB investigation. Conversely, the NTSB cannot prohibit or interfere with FAA actions required to ensure the continuing safety of the NAS. Title 49 U.S.C. §40113, grants the FAAAdministrator the authority to conduct investigations concerning aviation safety.

Note: There may be times when the FAA needs additional information not required by the NTSB. In gathering that evidence, the FAA will coordinate with the NTSB IIC in a manner that does not interfere with the investigation. A joint policy between FAA and NTSB regarding this coordination was developed in Ashburn, Virginia, and resulted in a letter dated June 4, 2014. This letter is known as the “Ashburn Accord” and is attached in Appendix A, Part 4.

4. FAA and NTSB Accident and Incident Investigation Agreements.

a. The FAA and the NTSB have agreed that the following apply when NTSB conducts an onscene investigation:

(1) The investigation is under the control and direction of the NTSB IIC.

(2) The FAA must at all times have a coordinator (FAA IIC) designated as its principal representative until the investigation is complete. The designation of a person as the FAA IIC conveys the authority to obtain and use the services of all needed FAA personnel, facilities, and records. Through this principal representative, NTSB will make available to FAA any documents, reports, and other evidence from the investigation and any tentative recommendations so that the FAA may immediately take the necessary corrective actions.

(3) Participation of other FAA personnel must be determined by the FAA IIC. The FAA IIC must work with the NTSB IIC in coordinating all FAA's activities.

(4) FAA personnel assigned to a group must work under the direction of the group chairperson and remain with the group until that phase of the investigation has been completed or they are released by the NTSB IIC and the FAA IIC.

(5) The NTSB IIC must inform the FAA IIC of all aspects of the investigation.

(6) Relevant investigation records and reports must be made available to FAA in an orderly and timely manner.

(7) The NTSB IIC shall not release the aircraft wreckage until the FAA agrees that it is no longer needed (see Paragraph 23 of this chapter).

5. Other Parties. In addition to the involvement of the NTSB and the FAA, other parties may participate in the investigation of an accident. Company safety personnel, manufacturing representatives, union representatives, and others may be onsite to assist in the investigation. It is important that all personnel involved with the accident investigation be aware of the other parties and their teams in order to establish communication channels for obtaining and exchanging information in an efficient and cordial manner.

6. Separate FAA Investigation.

a. If the FAA IIC determines that an unsafe condition exists in any of the FAA’s nine areas of responsibility, the FAA may conduct a separate investigation to gather the information necessary and the FAA IIC will inform the NTSB IIC as soon as possible. The FAA IIC must make it clear that the FAA is acting on its own behalf, independent of the NTSB’s investigation and must inform the NTSB IIC of any additional and pertinent information it obtains during the FAA investigation.

b. 49 U.S.C. §40113 requires the FAA to investigate accidents and enforce the regulations. The FAA cannot ignore instances where non-compliance is discovered. However, no enforcement action will be undertaken by any of the participants of an NTSB safety investigation.

c. If information becomes available during the NTSB investigation that indicates noncompliance may be present, notify the FAA IIC as soon as possible. The FAA IIC will notify the NTSB IIC and the appropriate FAA office(s). An FAA enforcement action separate from the NTSB safety investigation may begin.

Note: No enforcement action should be initiated by the FAA until the NTSB has completed the field investigation. Exceptions can be made in the interest of safety, such as an emergency revocation of a certificate.

d. FAA personnel participating in the NTSB’s safety investigation should not normally participate in the separate FAA enforcement action. The preferred method of conducting a concurrent and parallel investigation with the NTSB is for Flight Standards to assign another inspector other than the FAA IIC to conduct the FAA investigation, if resources permit.

Note: Principal operations inspectors (POI), principal maintenance inspectors (PMI), and principal avionics inspectors (PAI) assigned to a certificate holder or commercial operator involved in an accident must be available to the FAA IIC as soon as possible after notification of the accident. The FAA IIC is responsible for determining the extent of the principal inspector’s involvement with the investigation. This decision will be made by the FAA IIC after consulting with the principal inspector, the district office manager, and/or the appropriate Flight Standards division manager. The FAA IIC should avoid using a principal inspector for investigations involving that inspector’s assigned certificate holders or operators if possible.

e. The NTSB does not normally share information such as copies of documents, photos, data, witness statements, etc. obtained through and by the NTSB safety investigation with the FAA personnel conducting an enforcement action. The FAA inspectors performing the enforcement work must acquire their own evidence and information through their own efforts separate from the NTSB safety investigation. However, gathering evidence for enforcement purposes may occur concurrently with the safety investigation. For example, both FAA and NTSB investigators take separate notes of interview with witnesses.

Note: It is important to note that, in conducting these investigations, there may be times when Flight Standards, AVP-100, or other FAA offices need additional information not required by the NTSB. In gathering that evidence, the FAA will coordinate with the NTSB IIC in a manner that does not interfere with the investigation. A joint policy between FAA and NTSB regarding this coordination was developed in Ashburn, Virginia, and resulted in a letter dated June 4, 2014. This letter is known as the “Ashburn Accord” and is attached in Appendix A, Part 4.

f. When FAA inspectors collect evidence for use against an airman, certificate holder, or commercial operator, there must be no question in the mind of the person from whom the evidence is being requested that the inspector is not working under the direction of the NTSB. For example, witness or crewmember statements should never be written on NTSB forms; however, the rules of evidence do not prohibit FAA inspectors and NTSB investigators from gathering information simultaneously, such as when interviewing a witness, as long as the witness is aware that the information is being given to both the NTSB and to the FAA separately.

g. Information from open enforcement cases must not be shared outside the FAA.

7. Initial Notification.

a. The FAA WOCC will notify the NTSB Response Operations Center of all major aviation disasters and other aircraft accidents, incidents, and midair collisions having significant congressional

or public interest. The FAA WOCC also provides reports to the NTSB of near midair collisions and operational errors each scheduled workday.

b. The FAA will notify the NTSB of all occurrences of commercial space launch, reentry accidents, and launch site accidents.

c. The appropriate FAA ROC will notify, as soon as practicable, the respective NTSB regional office of all aviation accidents and incidents coming to the FAA’s attention which occur within its geographical area of responsibility.

8. Notification Reporting via FAA Forms 8020-9 and 8020.11. FAA Form 8020-9, “Aircraft Accident/Incident Preliminary Notice,” and FAA Form 8020-11, “Incident Report,” can be used for the initial reporting of an event in the NAS, although these forms are not in an electronic format and must be manually completed. The data blocks in these forms encompass factual data that is required for collection to determine the need for an accident/incident investigation.

9. ATO Flight Program Operations (Hangar 6). ATO Flight Program Operations coordinates the use of FAA aircraft for accident investigation launches directly with the NTSB. FAA aircraft and crewmember services are limited to air transportation of NTSB and FAA personnel to the scene of accidents/incidents that occur within the contiguous U.S., within the States of Alaska and Hawaii, and within foreign countries on a no-cost basis in accordance with the Reimbursable Memorandum of Agreement between Department of Transportation and National Transportation Safety Board, Appendix A: Federal Aviation Administration (as amended). This service is subject to crewmember and aircraft availability and FAA operational requirements. One seat will be reserved for the AVP­ 100 FAA IIC on any Flight Program Operations airplane launch involving an aviation or commercial space accident or incident. Additionally, one seat will be reserved for the ATO accident/incident investigator or his/her representative when ATO facilities or personnel are involved in the accident/incident. The AVP-100 IIC and/or AVP-100 division director will coordinate with the NTSB regarding FAA participation in the launch.

10. Coordination.

a. The majority of accident/incident investigations will be conducted under the direction of the NTSB IIC whether the NTSB chooses to travel to the accident scene or not.

b. The FAA will designate an FAA IIC who serves as the FAA party coordinator to the NTSB’s investigation.

c. The FAA IIC should:

(1) Use the NTSB’s accident on-scene headquarters “Command Post” as the FAA IIC’s headquarters during the field phase of the investigation.

(2) Contact the appropriate FAA office and notify the NTSB IIC and AVP-100 if emergency corrective actions are needed.

(3) Consult with the respective regional air traffic organization and/or AVP-100 to determine the need for and extent of an ATC facility flight inspection. Notify the NTSB IIC of the resulting decision.

(4) Determine the need for assignment of additional FAA personnel to the accident investigation. The FAA IIC will coordinate adding or removing FAA personnel from the NTSB investigation with the NTSB IIC. The FAA IIC determines the qualifications necessary for personnel to represent the FAA.

d. The NTSB IIC should:

(1) Keep the FAA IIC informed of the progress of the investigation. Specifically, pertinent records obtained and factual reports prepared during the investigation will be made available to the FAA IIC.

(2) Coordinate with the FAA IIC for the release of the accident/incident aircraft, launch vehicle, or reentry vehicle wreckage (See Paragraph 24 of this section for further details).

11. FAA Action When FAA Arrives on Accident Scene before the NTSB IIC. When the NTSB is anticipated to be present on scene, refer to Chapter 4 of this order. Consider consulting with NTSB regarding the removal of human remains from the accident scene. Additionally, wait for the NTSB investigator to conduct in-depth witness interviews except in the case of transient witnesses.

12. NTSB Organizational Meetings. When the NTSB IIC is on scene to conduct the investigation, the NTSB will conduct an investigative organizational meeting following the initial site visit and familiarization. The FAA IIC and FAA participants should attend the meeting. In this case, the FAA IIC organizational meeting will include only FAA personnel and should follow the NTSB’s organizational meeting. The FAA’s organizational meeting is described in Chapter 3, paragraph 11 of this order.

13. FAA Participants.

a. FAA participants report to and are tasked under the direction of the FAA IIC in all matters related to the function(s) assigned by and/or agreed to by the FAA IIC.

b. If assigned to an NTSB investigative group, FAA participants must not withdraw from the investigation until that phase of the investigation has been completed or until they are released by the NTSB IIC and the FAA IIC. Participants must submit reports if requested by the FAA IIC.

Continue reading ↓ 120 of 237 passages shown