Order JO 7110.66D National Beacon Code Allocation Plan (NBCAP)
This document is cancelled. Cancelled by JO 7110.66E. Check the official source before relying on it.
Effective Date 11/16/09 SUBJ: National Beacon Code Allocation Plan (NBCAP)
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
Air Traffic Organization Policy
ORDER JO 7110.66D
1. Purpose of This Order. This order prescribes procedures and functional responsibilities for the use of Mode 3/A of the Air Traffic Control Radar Beacon System. It applies to all air traffic control (ATC) facilities that provide services in United States (U.S.) domestic, oceanic, and arctic airspace.
ORDER JO 7110.66D
2. Audience. This directive applies to the following ATO service units: En Route and Oceanic, Terminal, System Operations Services, including the David J. Hurley Air Traffic Control System Command Center, the Directors of Tactical Operations, traffic management officers, System Operations Security, Flight Services Program Operations, the Alaska Flight Services Information Area Group, FAA contract ATC service providers and all ATC facilities; select offices and services within Washington headquarters; the William J. Hughes Technical Center; Mike Monroney Aeronautical Center; and Department of Defense.
3. Where Can I Find This Order? This order is available on the MyFAA employee Web site at https://employees.faa.gov/tools_resources/orders_notices/.
4. Cancellation. This cancels Federal Aviation Administration (FAA) Order 7110.66C, National Beacon Code Allocation Plan, dated March 1, 2007.
5. Explanation of Policy Changes. This revision amends the NBCAP, Appendix 1, with beacon code allocation changes made since March 1, 2007, to include the following assignments: code 1000 for use by ADS-B aircraft to inhibit Mode 3A transmit; code 1201 for use by Visual Flight Rules (VFR) gliders not in contact with ATC; codes 4466 – 4477 for federal law enforcement; and code 4454 – 4465 for Air Force operations above FL600. It amends Jacksonville Air Route Traffic Control Center’s (ARTCC) EP-1 code to 0700 for assignment by HOST and assigns code 1000 as EP-2. Clarifications of definitions and responsibilities are added to various paragraphs throughout the order.
6. Concept.
a. The primary goal is to efficiently manage the beacon code set as a very limited National Airspace System (NAS) resource. The NBCAP is based upon the concept of discrete beacon code assignments to each ARTCC so that codes can be adapted and assigned by a computer to a flight plan according to a specific procedure. Ideally, each ARTCC should be allocated enough exclusive code blocks so that each aircraft could be given a computer assigned unique discrete code which would not be duplicated anywhere in the NAS. The intent would allow all aircraft to proceed from departure to destination using the same discrete code. Unfortunately, duplicate computer code assignments are unavoidable because of the limited number of code subsets available, the number of ARTCC’s, and the volume of traffic. To minimize the impact of duplicate computer assignments, careful analysis of code utilization statistics is required to ensure appropriate facility assignments. Therefore, ARTCC facility assignments are managed from the national level.
Distribution: ZAT-710; ZAT-464 Initiated By: AJE-3 En Route and Oceanic Safety and Operations Support
b. Terminal, industry, unique purpose, or experimental activity beacon code assignments are made from the allocations designated in appendix A, and are managed by the service area directorates. If additional codes are needed, or reassignment of codes necessary, the En Route and Oceanic Safety and Operations Support directorate will assist the service area directorates in determining a solution.
c. Every effort will be made to consider and comply with International Civil Aviation Organization (ICAO) beacon code assignment procedures when necessary and possible.
7. Responsibilities.
a. En Route and Oceanic Services, Safety and Operations Support Directorate shall:
(1) Make and manage all national beacon code allocations.
(2) Make all service area code assignments beyond those delegated in this order.
(3) Make all ARTCC beacon code assignments.
(4) Review service area directorate supplements and audit local beacon code assignments as necessary.
(5) Respond to service area directorate requests to support terminal, industry, unique purpose or experimental activity needs.
(6) When necessary, coordinate beacon code assignments with international air traffic service providers with assistance from the service area directorates.
(7) Work with service area directorates to coordinate beacon code assignments with non-FAA agencies such as the Department of Defense (DOD).
b. Service areas directorates shall:
(1) Assist En Route Safety and Operations Support Directorate with the execution of this order.
(2) Manage all service area directorate beacon code assignments delegated in this order.
(3) Work with local ARTCCs and the En Route and Oceanic Safety and Operations Support Directorate to manage internal beacon code assignments in accordance with this document.
(4) Develop a service area directorate supplement to this order, and specify the designated use of beacon code assignments made by the service area directorate. Include in the supplement a current record of all instrument flight rules (IFR) and VFR code blocks assigned to each terminal, flight service facility, or unique purpose, along with the specific use or function of each code block. For those service area directorates whose area of responsibility includes or is adjacent to an Air Defense Identification Zone (ADIZ), include codes assigned for identification of aircraft on Defense Visual Flight Rules (DVFR) flight plans. Document any restrictions and/or agreements on beacon code assignments or adaptation in the supplement. Update the service area directorate supplement as needed and forward a copy to En Route Safety and Operations Support directorate for review.
(5) Coordinate with other service area directorates to prevent beacon code assignment conflicts between adjacent terminal/flight service facilities. Service area directorates with facilities that border international boundaries will assist En Route and Oceanic Safety and Operations Support Directorate to ensure coordination with adjacent international facilities (such as Canadian, Mexican, Bahamian, and Cuban) is accomplished, as appropriate.
c. ATC facilities shall:
(1) Ensure that beacon code usage is in compliance with the ARTCC and service area directorate’s beacon code assignments outlined in this document and service area supplements.
(2) Adjust appropriate computer parameters to optimize code-use times.
(3) Forward to the service area directorates all requests for additional code assignments accompanied by the justification specified in paragraph 10, Justification Requirements, below. Ensure that requests for codes dedicated to a specific function or to be used for a unique purpose are approved sparingly, since this will limit the overall number of codes available for general use. Examples of unique purposes include: VFR traffic penetrating Class B airspace, and practice instrument approaches.
8. Code Assignments. a. ARTCC. The En Route and Oceanic Safety and Operations Support directorate shall assign internal, external and tertiary center code blocks. b. For Center Radar Approach Control (CERAP), Terminal, Flight Service Station (FSS)/Automated Flight Service Station (AFSS), Industry, Unique Purpose, or Experimental Activities: Codes must be assigned by the service area directorates and documented in the service area directorates supplement.
c. Military: Codes are allocated in this order (Appendix A, Table A-1) and specified in FAA Order JO 7610.4. Additional DOD requirements shall be forwarded to the appropriate directorate for consideration.
d. Full code blocks are designated in the appendices to this document by the base, non-discrete, code of that block. Example - 2600 indicates codes 2601 through 2677. The non-discrete code, 2600 in this example, will normally not be assigned. Code 0000 shall never be assigned. Where partial blocks are allocated, the actual range of codes will be listed.
e. DVFR: Special procedures are required for VFR flights into, within or out of the United States ADIZ. Code assignments are made by AFSS when a flight plan is activated for a VFR flight that will fly into, out of, or within the ADIZ. (See FAA Order JO 7110.10, Chapter 6, Paragraph 1, Flight Plan Proposals, and the DVFR Flight Procedures document).
9. Justification Requirements.
a. ARTCCs shall submit all requests for additional beacon codes or allocation adjustments through their service area directorate to En Route Safety and Operations Support directorate. Justifications must include full rationale with traffic counts, specific cases/issues, and any other supporting data. Requests will be evaluated using existing code utilization statistics and overall NAS impact.
b. Terminal/AFSS/CERAP shall forward requests to their service area directorate with supporting documentation, which must include quantifiable justification such as traffic count or projected peaks.
c. Industry/Unique Purpose/Experimental Activities/Customers shall submit a detailed letter to the facility or the service area directorate with supporting documentation, to indicate intended use, safety considerations, duration needed, and impact if not approved.
10. Distribution. This order is distributed to select offices in Washington Headquarters, Service Area Directors, the William J. Hughes Technical Center, the Mike Monroney Aeronautical Center, all air traffic control facilities, and all flight standards and international aviation field offices.
11. Definitions.
a. Beacon Code Assignment - The actual distribution of specific codes from within the NBCAP to specific facilities and/or special activities as defined in the appendices to this document.
b. Beacon Code Set - Four octal digits in which the decimal numbers "8" and "9" are not used. There are 4096 possible codes (0000-7777).
c. Code Block - The first two octal digits of the code (for example, 00##, 12##). There are 64 different code blocks. Any code block described in this order by the non-discrete code ending in “00” (for example 2100, or 1000) refers to the entire block (for example, 2101-2177 or 1001-1077).
d. Non-discrete Codes - Codes that end in “##00”. There are 64 non-discrete codes. Assign nondiscrete codes based on guidance found in FAA Order JO 7110.65, 5-2-6 through 5-2-10. Non-discrete codes may also be assigned by the En Route Safety and Operations Support Directorate. Code “0000” should never be assigned or used.
e. Discrete Code - The last two digits of the code (for example, ##01, ##43). There are 63 discrete codes in every block with 4032 total.
f. Code Subset - A series of discrete beacon codes within a code block. It is described by the lowest and highest number in the subset (for example, 2110 - 2120 = 9 discrete codes; viz., 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117 and 2120).
g. Computer Assigned Code – A beacon code assigned to a specific flight plan as the result of a program function or a controller message input.
h. Defense Visual Flight Rules (DVFR) - Procedures governing aircraft flying VFR through or within an Air Defense Identification Zone (ADIZ).
i. External Code - A beacon code reserved for computer assignment to a flight plan with one or more route segments not contained within a single domestic ARTCC’s airspace.
j. Internal Code - A beacon code reserved for computer assignment to a flight plan where all route segments are contained in a single domestic ARTCC’s airspace.
k. Function Codes - Non-discrete beacon codes utilized in accordance with FAA Order JO 7110.65, Air Traffic Control, Chapter 5, paragraph 2-6.
l. Primary Code Blocks - Blocks of codes in an ARTCC’s computer from which code assignments are first attempted. Primary blocks are adapted for internal and external flight plans.
m. Secondary Code Block - Blocks of codes in an ARTCC’s computer from which code assignment is attempted only when all discrete codes in the primary code blocks are not available. Secondary blocks are adapted for internal and external flight plans.
n. Service Area Beacon Code Supplement - A document maintained by service area specialist that documents the assignment of beacon codes to facilities other than ARTCCs; for example, TRACONs, Towers, military units, etc.
o. Tertiary Code Blocks - Blocks of codes in an ARTCC's computer from which code assignment is attempted when no codes from the primary or secondary code blocks are available. Tertiary blocks are adapted as a final back-up for external flight plans to avoid complete depletion for unique codes.
Appendix A
Appendix A
Appendix A. National Beacon Code Allocation Summary
TBL A-1 National Beacon Code Allocation Summary
0100-0400 Allocated to Service Area Operations for assignment for use by Terminal/CERAP/Industry/Unique Purpose/Experimental Activities
1000 Used exclusively by ADS-B aircraft to inhibit Mode 3A transmit 1200 Visual Flight Rules (VFR) aircraft not in radio contact with an ATC Facility
Appendix A. National Beacon Code Allocation Summary
1201 Reserved for use by VFR Gliders not in contact with ATC. Also assigned via FAR 93.95 for use by VFR aircraft in the immediate vicinity of LAX. 1202-1272 Discrete 1200 series codes, unless otherwise allocated (for example, 1255), designated for DVFR aircraft and only assigned by FSS. 1255 Fire fighting aircraft 1273-1275 Calibration Performance Monitoring Equipment (CPME) “Parrot” transponders 1276 Air Defense Identification Zone (ADIZ) penetration when unable to establish communication with ATC or aeronautical facility 1277 Designated Search and Rescue (SAR) aircraft 0100-0700, 1000, 1100, 1300, 1500, 2000*, 2100, 2200, 2300, 2400, 4000
Non-discrete code assignments in accordance with FAA Order JO 7110.65, 5-2 *Also for use in oceanic airspace, unless another code is assigned by ATC 4400 SR-71, F-12, U-2, B-57, pressure suit flights and aircraft operations above FL 600 in accordance with FAA Order JO 7110.65, Chapter 5, Section 2 4401-4433, 4466-4477 Reserved in accordance with FAA Order JO 7110.67 (Fed Law Enforcement) 4434-4437 Weather reconnaissance, as appropriate 4440-4441 Operations above FL600 for Lockheed/NASA from Moffett Field 4442-4446 Operations above FL600 for Lockheed from Air Force Plant 42 4447-4452 Operations above FL600 for SR-71/U-2 operations from Edwards AFB 4453 High balloon operations – National Scientific Balloon Facility, Palestine TX, and other providers, some in international operations 4454-4465 Air Force operations above FL600 as designated in FAA Order 7610.4 5100-5300 May be used by DOD aircraft beyond radar coverage but inside U.S. controlled airspace with coordination as appropriate with applicable Area Operations Directorate.
Any codes used by DOD aircraft outside U.S. controlled airspace need to be coordinated with the applicable Flight Information Region(s) (FIR) air traffic authorities. 5000, 5400, 6100, 6400, 7501-7577 Reserved for use by DOD. The use of these code blocks can only be authorized and/or assigned by Continental NORAD Region (CONR); 601st Air Operations Center (AOC) Airspace Specialty Team, Tyndall Air Force Base, Florida. 5061-5062, 5100, 5200 Reserved for special use by Potomac TRACON 7601-7607, 7701-7707 Reserved for special use by FAA 7500 Hijack in accordance with FAA Order JO 7610.4 7600 Radio Failure in accordance with FAA Order JO 7110.65 7700 Emergency in accordance with FAA Order JO 7110.65
Appendix A
Appendix A
7777 DOD interceptor aircraft on active air defense missions and operating without ATC clearance in accordance with FAA Order 7610.4 0500, 0600, 0700, 1000, 1100, 1300, 1400, 1500, 1600, 1700, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 3000, 3100, 3200, 3300, 3400, 3500, 3600, 3700, 4000, 4100, 5600, 5700, 6000, 6200, 6300, 6500, 6600, 6700, 7000, 7100, 7200, 7300, 7400, 7610-7676, 7710- 7776
External ARTCC subsets (Discrete codes of blocks only except for first primary block, which is used as the ARTCC’s non-discrete code if all discrete codes are assigned.)
0000, 4200, 4300, 4500, 4600, 4700, 5100, 5200, 5300, 5500
Internal ARTCC subsets assigned by En Route Safety and Operations Support (Discrete codes only except for first primary block to be used as non-discrete if all discrete codes are assigned.) Exceptions for operational need are approved by En Route Safety and Operational Support
Appendix B. National Beacon Code Allocation Details
Appendix B. National Beacon Code Allocation Details
TBL B-1 ARTCC Code Categories
I Internal Departures E External Departures M Military S Special Use
TBL B-2 ARTCC Computer Adaptation Sequence
P Primary Code Block S Secondary Code Block T Tertiary Code Block (AAn) Adaptation Sequence (Priority)
TBL B-3 ARTCC Assignments
ARTCC Code Thru Code Priority KZAK 1100 ODAPS KZWY 1000 ODAPS ZAB 0700 EP-1 ZAB 2600 EP-2 ZAB 4100 ES-1 ZAB 1500 ES-2 ZAB 1600 ES-3 ZAB 7610 - 7676 ET-1 ZAB 7710 - 7776 ET-2 ZAB 4200 IP-1 ZAB 4300 IP-2 ZAB 5500 IS-1 ZAN 3400 E ZAN 4100 E ZAN 5700 E ZAN 6200 E ZAN 7200 E ZAN 7400 E ZAN 4000 ES ZAN 5600 ES ZAN 2200 I ZAN 2300 I ZAN 2500 I ZAN 4200 I ZAN 4500 I
ARTCC Code Thru Code Priority ZAN 4600 I ZAN 4700 I ZAN 5100 I ZAN 5200 I ZAN 5500 I M ZAN 6300 I M ZAN 3100 IS ZAN 3500 IS ZAU 1300 EP-1 ZAU 6200 EP-2 ZAU 6500 EP-3 ZAU 3100 EP-4 ZAU 3500 ES-1 ZAU 3200 ES-2 ZAU 5600 ES-3 ZAU 7200 ES-4 ZAU 2200 ET-1 ZAU 0500 ET-2 ZAU 4300 IP-1 ZAU 5300 IP-2 ZAU 5500 IS-1 ZAU 4700 IS-2 ZAU 0000 IS-3 ZBW 3400 EP-1 ZBW 3500 EP-2 ZBW 7300 ES-1 ZBW 2000 ES-2 ZBW 1400 ES-3 ZBW 1300 ES-4 ZBW 7000 ET-1 ZBW 2400 ET-2 ZBW 4600 IP-1 ZBW 5300 IS-1 ZBW 5500 IS-2 ZBW 4700 IS-3 ZBW 0000 IS-4 ZDC 7000 EP-1 ZDC 3600 EP-2 ZDC 0500 EP-3 ZDC 5600 EP-4 ZDC 2100 EP-5 ZDC 2400 EP-6 ZDC 1300 ES-1 ZDC 6500 ES-2 ZDC 6200 ES-3 ZDC 3500 ET-1
ARTCC Code Thru Code Priority ZDC 3700 ET-2 ZDC 4600 IP-1 ZDC 5300 IP-2 ZDC 5500 IS-1 ZDC 0000 IS-2 ZDC 4700 IS-3 ZDV 1400 EP-1 ZDV 0600 ES-1 ZDV 2700 ES-2 ZDV 6500 ES-3 ZDV 3700 ES-4 ZDV 7441 - 7453 ET-1 ZDV 2212 - 2235 ET-2 ZDV 3401 - 3427 ET-3 ZDV 6644 - 6655 ET-4 ZDV 5622 - 5642 ET-5 ZDV 3333 - 3377 ET-6 ZDV 5100 IP-1 ZDV 5500 IS-1 ZDV 4300 IS-2 ZDV 0000 IS-3 ZFW 2200 EP-1 ZFW 2300 EP-2 ZFW 0500 EP-3 ZFW 3400 ES-1 ZFW 6200 ES-2 ZFW 3600 ES-3 ZFW 0613 - 0677 ET-1 ZFW 7041 - 7077 ET-2 ZFW 3021 - 3077 ET-3 ZFW 3241 - 3264 ET-4 ZFW 5100 IP-1 ZFW 5200 IP-2 ZFW 5300 IS-1 ZFW 4500 IS-2 ZHU 2400 EP-1 ZHU 2500 EP-2 ZHU 7400 ES-1 ZHU 7300 ES-2 ZHU 4000 ES-3 ZHU 2700 ES-4 ZHU 7200 ES-5 ZHU 6700 ET-1 ZHU 6600 ET-2 ZHU 4500 IP-1 ZHU 4600 IP-2
ARTCC Code Thru Code Priority ZHU 4700 IP-3 ZHU 4200 IP-4 ZHU 5200 IP-5 ZHU 0000 IS-1 ZHU 5100 IS-2 ZHU 4300 S(pecial) ZID 6600 EP-1 ZID 6700 EP-2 ZID 4000 EP-3 ZID 3700 ES-1 ZID 3400 ES-2 ZID 1400 ES-3 ZID 7300 ES-4 ZID 2701 - 2735 ET-1 ZID 3001 - 3042 ET-2 ZID 2601 - 2642 ET-3 ZID 4200 IP-1 ZID 4500 IP-2 ZID 5500 IS-1 ZJX 0700 EP-1 ZJX 1000 EP-2 ZJX 2600 EP-3 ZJX 3000 ES-1 ZJX 3200 ES-2 ZJX 6200 ES-3 ZJX 1500 ES-4 ZJX 1600 ES-5 ZJX 7300 ES-6 ZJX 0600 ET-1 ZJX 2700 ET-2 ZJX 6700 ET-3 ZJX 6500 ET-4 ZJX 4200 IP-1 ZJX 5500 IP-2 ZJX 4300 IS-1 ZJX 7400 IS-2 ZKC 2100 EP-1 ZKC 1100 EP-2 ZKC 1700 EP-3 ZKC 5700 ES-1 ZKC 2500 ES-2 ZKC 7401 - 7440 ET-1 ZKC 2001 - 2020 ET-2 ZKC 3301 - 3311 ET-3 ZKC 7101 - 7120 ET-4 ZKC 6001 - 6023 ET-5
ARTCC Code Thru Code Priority ZKC 4600 IP-1 ZKC 4700 IP-2 ZKC 5200 IS-1 ZLA 7200 EP-1 ZLA 7300 EP-2 ZLA 1000 EP-3 ZLA 6700 ES-1 ZLA 2000 ES-2 ZLA 1300 ES-3 ZLA 7610 - 7676 ET-1 ZLA 7710 - 7776 ET-2 ZLA 4600 IP-1 ZLA 4700 IP-2 ZLA 5300 IS-1 ZLA 5100 IS-2 ZLC 6000 EP-1 ZLC 0500 ES-1 ZLC 3100 ES-2 ZLC 4000 ES-3 ZLC 7610 - 7676 ET-1 ZLC 7710 - 7776 ET-2 ZLC 4300 IP-1 ZLC 5300 IS-1 ZLC 5200 IS-2 ZLC 4200 IS-3 ZMA 3600 EP-1 ZMA 3700 EP-2 ZMA 1400 EP-3 ZMA 7400 EP-4 ZMA 2300 ES-1 ZMA 2100 ES-2 ZMA 1100 ES-3 ZMA 3500 ES-4 ZMA 5700 ES-5 ZMA 1300 ES-6 ZMA 3300 ES-7 ZMA 6600 ES-8 ZMA 6000 ES-9 ZMA 0500 ET-1 ZMA 2200 ET-2 ZMA 5600 ET-3 ZMA 7610 - 7676 ET-4 ZMA 7710 - 7776 ET-5 ZMA 4600 IP-1 ZMA 4700 IP-2 ZMA 4500 IP-3
ARTCC Code Thru Code Priority ZMA 0000 IP-4 ZMA 5300 IS-1 ZMA 5100 IS-2 ZMA 4200 IS-3 ZME 1500 EP-1 ZME 5600 EP-2 ZME 1600 EP-3 ZME 0700 ES-1 ZME 1000 ES-2 ZME 1300 ES-3 ZME 7610 - 7676 ET-1 ZME 7710 - 7776 ET-2 ZME 4300 IP-1 ZME 5500 IP-2 ZME 5300 IS-1 ZME 4500 IS-2 ZMP 2400 EP-1 ZMP 2600 EP-2 ZMP 3600 EP-3 ZMP 3000 ES-1 ZMP 7000 ES-2 ZMP 6300 ES-3 ZMP 6700 ET-1 ZMP 3312 - 3332 ET-2 ZMP 1501 - 1532 ET-3 ZMP 4200 IP-1 ZMP 4500 IP-2 ZMP 4600 IS-1 ZMP 5200 IS-2 ZNY 1600 EP-1 ZNY 1700 EP-2 ZNY 2700 EP-3 ZNY 3000 EP-4 ZNY 3300 EP-5 ZNY 2600 EP-6 ZNY 1500 EP-7 ZNY 7100 EP-8 ZNY 1100 EP-9 ZNY 6600 ES-1 ZNY 2300 ES-2 ZNY 4000 ES-3 ZNY 1000 ES-4 ZNY 2200 ES-5 ZNY 6725 - 6777 ET-1 ZNY 7610 - 7676 ET-2 ZNY 7710 - 7776 ET-3
ARTCC Code Thru Code Priority ZNY 4200 IP-1 ZNY 4300 IP-2 ZNY 4500 IS-1 ZOA 3200 EP-1 ZOA 3300 EP-2 ZOA 1700 ES-1 ZOA 6300 ES-2 ZOA 3600 ES-3 ZOA 3700 ES-4 ZOA 0601 - 0647 ET-1 ZOA 2212 - 2235 ET-2 ZOA 7001 - 7020 ET-3 ZOA 7054 - 7077 ET-4 ZOA 7441 - 7464 ET-5 ZOA 3001 - 3020 ET-6 ZOA 4200 IP-1 ZOA 4500 IP-2 ZOA 4300 IS-1 ZOA 5500 IS-2 ZOA 7000 IS-3 ZOB 5700 EP-1 ZOB 4100 EP-2 ZOB 7400 EP-3 ZOB 0700 EP-4 ZOB 6000 ES-1 ZOB 2500 ES-2 ZOB 1000 ES-3 ZOB 2100 ES-4 ZOB 7200 ES-5 ZOB 2300 ES-6 ZOB 0600 ET-1 ZOB 6300 ET-2 ZOB 5100 IP-1 ZOB 5200 IP-2 ZOB 4500 IS-1 ZSE 3500 EP-1 ZSE 6600 EP-2 ZSE 1500 ES-1 ZSE 1600 ES-2 ZSE 2236 - 2277 ET-1 ZSE 7412 - 7477 ET-2 ZSE 0650 - 0677 ET-3 ZSE 3430 - 3477 ET-4 ZSE 4600 IP-1 ZSE 4700 IP-2 ZSE 5200 IS-1
ARTCC Code Thru Code Priority ZSE 5100 IS-2 ZTL 2000 EP-1 ZTL 6300 EP-2 ZTL 3100 EP-3 ZTL 7100 EP-4 ZTL 7200 ES-1 ZTL 2200 ES-2 ZTL 4100 ES-3 ZTL 3500 ES-4 ZTL 3300 ES-5 ZTL 5700 ES-6 ZTL 6000 ES-7 ZTL 1100 ES-8 ZTL 1700 ES-9 ZTL 2300 ET-1 ZTL 5100 IP-1 ZTL 5200 IP-2 ZTL 4700 IS-1 ZTL 5300 IS-2 ZTL 2600 IS-3