Radar Vectors
FAA Order Cancelled Issued Feb 25, 2005 AJE-3 15 pages Copy saved Nov 18, 2026

Order 7110.66C National Beacon Code Allocation Plan (NBCAP)

This document is cancelled. Cancelled by JO 7110.66D. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (14 of 15 pages). Check the original, as some words may be misread.

U.S. DEPARTMENT OF TRANSPORTATION ORDER FEDERAL AVIATION ADMINISTRATION 7110.66C

U.S. DEPARTMENT OF TRANSPORTATION ORDER FEDERAL AVIATION ADMINISTRATION 7110.66C

2/25/05

SUBJ: NATIONAL BEACON CODE ALLOCATION PLAN (NBCAP)

1. PURPOSE. This order prescribes the procedures and the functional responsibilities for the use of Mode 3/A of the Air Traffic Control Radar Beacon System (ATCRBS). It applies to all Air Traffic Control (ATC) facilities that provide services in United States (U.S.) domestic or oceanic airspace.

SUBJ: NATIONAL BEACON CODE ALLOCATION PLAN (NBCAP)

2. DISTRIBUTION. This order is distributed to select offices in Washington Headquarters, Service Area Directorates, the William J. Hughes Technical Center, the Mike Monroney Aeronautical Center, all air traffic control facilities, all flight standards and international aviation field offices.

3. CANCELLATION. Order 7110.66B, National Beacon Code Allocation Plan, dated February 3, 1999, is canceled.

4. EXPLANATION OF CHANGES. This revision delegates and reassigns NBCAP responsibilities. Certain terms and procedures were changed or deleted. Primary responsibility for assigning ARTCC codes and international coordination was transferred from the Service Area Directorates to the national level. A third level of priority, tertiary codes, was added to en route automation processing to prevent the assignment of nondiscrete beacon codes due to an Air Route Traffic Control Center exhausting its assignment. These assignments are listed in Appendix 1 of this order and should be implemented as soon as practicable. Service Area Directorates may not assign codes to terminal facilities or for special use from the internal center blocks without headquarters approval.

Distribution: ZAT-710; ZAT-464 Initiated By: ATO-E

2/25/05 7110.66C

5. DEFINITIONS.

a. Beacon Code Assignment is the actual distribution of specific codes from within the National Beacon Code Allocation to specific facilities and/or special activities.

b. Beacon Code Set is comprised of 4096 possible codes (0000-7777). The Beacon Code Set uses 4 octal digits in which the numbers "8" and "9" are not used.

c. Code Block is a group of codes designated for a specific purpose and may be a subset(s), or parts thereof.

d. Code Subset is a series of beacon codes consisting of a nondiscrete (i.e., ##00) followed by 63 discrete codes (e.g., 2000, 2001, 2002,2077). The entire subset will be identified by using the four digits of the nondiscrete code (e.g., 2100 = 2100-2177).

e. Computer Assigned Code is a beacon code assigned to a specific flight plan as the result of a program function or a controller message input.

f. Defense Visual Flight Rules (DVFR) are defined in 14 CFR Part 99 for flights operating in an Air Defense Identification Zone (ADIZ) under visual flight rules (VFR) in accordance with CFR Part 91.

g. Discrete Codes are beacon codes that do not end in the numerals "00" (e.g., 0101, 5520, 6421). There are 4032 discrete codes.

h. External Code is a beacon code reserved for computer assignment to a flight plan with one or more route segments not contained within a single domestic ARTCC's airspace.

i. Function Codes are nondiscrete beacon codes utilized in accordance with FAA Order 7110.65, Air Traffic Control, Chapter 5, Section 2.

j. Internal Code is a beacon code reserved for computer assignment to a flight plan where all route segments are contained in a single domestic ARTCC's airspace.

k. National Beacon Code Allocation is the designation of specific beacon codes and beacon code subsets for the specific purposes defined in Appendix 1.

1. Nondiscrete Codes are beacon codes that end in the numerals "00" (e.g., 0100, 1200). There are 64 nondiscrete codes.

Page 2

7110.66C 2/25/05

m. Primary Code Block consists of a block of codes in an ARTCC's computer from which code assignments are first attempted. Blocks may be adapted for internal or external code assignment to flight plans.

n. Secondary Code Block consists of a block of codes in an ARTCC's computer from which code assignment is attempted only when all discrete codes in the primary code block are not available. Blocks may be adapted for internal or external code assignment to flight plans.

o. Tertiary Code Block consists of a block of codes in an ARTCC's computer from which code assignment is attempted when no codes from the primary or secondary code blocks are available. Blocks may be adapted for internal or external code assignment to flight plans.

6. CONCEPT.

a. The primary goal is to efficiently manage the beacon code set as a limited National Airspace System (NAS) resource. The NBCAP is based upon the concept of discrete beacon code assignments to each ARTCC so that codes can be adapted and assigned by a computer to a flight plan according to a specific procedure. Ideally, each ARTCC should be allocated enough exclusive code blocks so that each aircraft could be given a computer assigned unique discrete code which would not be duplicated anywhere in the NAS. The intent would thereby, allow all aircraft to proceed from departure to destination using the same discrete code. Unfortunately, duplicate computer code assignments are unavoidable because of the limited number of code subsets available, the number of ARTCC's, and the volume of traffic. To minimize the impact of duplicate computer assignments, careful analysis of code utilization statistics is required to ensure appropriate facility assignments. Therefore, ARTCC facility assignments are managed from the national level.

b. Terminal, industry, unique purpose, or experimental activity beacon code assignments are made from the allocation in Appendix 1 managed by the Service Area Directorates. If additional codes are needed, or reassignment of codes necessary, the En Route and Oceanic Safety and Operations Support Directorate will assign them to the Service Area Directorates from the available ARTCC subsets.

c. Every effort will be made to comply with International Civil Aviation Organization (ICAO) beacon code assignment procedures.

Page 3

2/25/05 7110.66C

7. RESPONSIBILITIES.

a. The En Route and Oceanic Safety and Operations Support Directorate shall:

(1) Make and manage all National Beacon Code Allocations.

(2) Make all Service Area code assignments beyond those delegated in this order.

(3) Make all ARTCC beacon code assignments.

(4) Review Service Area Directorate supplements and audit beacon code assignments as necessary.

(5) Respond to Service Area Directorate requests to support terminal, industry, unique purpose or experimental activity needs.

(6) Coordinate facility beacon code assignments with international air traffic service providers with assistance from the Service Area Directorates.

(7) Provide assistance to the Service Area Directorates with coordination of beacon code assignments with non-FAA agencies such as the DOD and the US Customs Service.

b. Service Area Directorates shall:

(1) Assist the En Route and Oceanic Safety and Operations Support Directorate with the execution of this order.

(2) Manage all Service Area Directorate beacon code assignments delegated in this order.

(3) Develop a Service Area Directorate supplement to this order, and specify the designated use of beacon code assignments made by the Service Area Directorate. Include in the supplement a current record of all IFR and VFR code blocks assigned to each terminal, flight service facility, or unique purpose, along with the specific use or function of each code block. For those Service Area Directorates whose area of responsibility includes or is adjacent to an ADIZ, include codes assigned for identification of aircraft on DVFR flight plans. Document any restrictions and/or agreements on beacon code assignments or adaptation in the supplement. Update the Service Area Directorate supplement as needed and forward a copy to the En Route and Oceanic Safety and Operations Support Directorate for review.

(4) Coordinate with other Service Area Directorates to prevent beacon code assignment conflicts between adjacent terminal/flight service facilities. Service Area Directorates with facilities Page 4

7110.66C 2/25/05

that border international boundaries will assist En Route and Oceanic Safety and Operations Support Directorate to ensure coordination with adjacent international facilities (such as Canadian, Mexican, Bahamian, and Cuban) is accomplished, as appropriate.

c. Air Traffic Control (ATC) Facilities shall:

(1) Ensure that code usage is in compliance with the ARTCC and Service Area Directorate's beacon code assignments.

(2) Adjust appropriate computer parameters to optimize code-use times.

(3) Forward to the Service Area Directorate all requests for additional code assignments accompanied by the justification specified in paragraph 9, Justification Requirements, below. Ensure that requests for dedicated codes to a specific function or to be used for a unique purpose is done sparingly since this will limit the overall number of codes available for general use. Examples of unique purposes include: VFR traffic penetrating Class B airspace, and practice instrument approaches.

8. CODE ASSIGNMENTS. Beacon code assignments shall be made from the allocations in Appendix 1:

a. ARTCC. The En Route and Oceanic Safety and Operations Support Directorate shall assign internal and external center code blocks.

b. CERAP, Terminal, FSS/AFSS, Industry, Unique Purpose, or Experimental Activities shall be assigned by the Service Area Directorates and documented in the Service Area Directorate supplement.

c. Military. As allocated in this order and specified in FAAO 7610.4. Additional DOD requirements shall be forwarded to En Route And Oceanic Safety And Operations Support Directorate.

9. JUSTIFICATION REQUIREMENTS.

a. ARTCC's shall submit all requests for additional beacon codes through their Service Area Directorate to the En Route and Oceanic Safety and Operations Support Directorate. These requests will be evaluated using existing code utilization statistics.

Page 5

7110.66C 2/25/05 APPENDIX 1. NATIONAL BEACON CODE ALLOCATIONS

7110.66C 2/25/05 APPENDIX 1. NATIONAL BEACON CODE ALLOCATIONS

Table 1-1 National Allocations 0100-0400 Allócated to the Area Operations Directorates for assignment for use by Terminal/FSS/CERAP/Industry/Unique Purpose/Experimental Activities. Visual Flight Rule (VFR) aircraft not in radio contact with an ATC facility 1201-1272 Discrete 1200 series codes, unless otherwise allocated (i.e, 1236, 1255), may be designated by Area Operations Directorates for DVFR aircraft.

Reserved in accordance with FAA Order 7110.52 Fire fighting aircraft not in contact with an ATC facility 1273-1275 Calibration performance monitoring equipment (CPME) "Parrot" transponders Air Defense Identification Zone (ADIZ) penetration when unable to establish communication with ATC or aeronautical facility Designated search and rescue (SAR) aircraft 0100-0700, 1000, 1100, 1300, Non-discrete code assignments in accordance with FAA Order 7110.65, Chapter 5, 1500,2000*, 2100, 2200, 2300, Section 2 2400,2500,4000 *Also for use in oceanic airspace, unless another code is assigned by ATC SR-71, F-12, U-2, B-57, pressure suit flights and flights, and aircraft operations above FL600 in accordance with FAA Order 7110.65, Chapter 5, Section 2 4401-4433 Reserved in accordance with FAA Order 7110.67 4434-4437 Weather reconnaissance, as appropriate 4440-4441 Operations above FL600 for Lockheed/NASA from Moffett Field 4442-4446 Operations above FL600 for Lockheed from Air Force Plant 42 4447-4452 Operations above FL600 for SR71/U2 operations from Edwards AFB High Balloon operations -

National Scientific Balloon Facility, Palestine TX, and other providers, some in international operations. 4454-4477 Air Force operations above FL600 as designated in FAA Order 7610.4 Reserved for use by DOD 5100-5300 May be used by DOD aircraft beyond radar coverage but inside U.S. controlled airspace with coordination as appropriate with applicable Area Operations Directorate. Any codes used by DOD aircraft outside U.S. controlled airspace need to be coordinated with the applicable flight information region(s) (Firs) air traffic authorities 5400, 6100, Reserved for use by DOD

Allocated in accordance with FAA Orders 7110.49 and 7110.65 Radio Failure in accordance with FAA Order 7110.65 Emergency in accordance with FAA Order 7110.65 DOD interceptor aircraft on active air defense missions and operating without ATC clearance

0500, 0600, 0700, 1000, 1100, 1300, 1400, 1500, 1600, External ARTCC subsets (Discrete codes of blocks only, 1700, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, except for first primary block) 3000, 3100, 3200, 3300, 3400, 3500, 3600, 3700, 4000, 4100, 5600, 5700, 6000, 6200, 6300, 6500, 6600, 6700, 7000,7100,7200,7300,7400 0000, 4200, 4300, 4500, 4600, 4700, 5100, 5200, 5300, Internal ARTCC subsets (Discrete codes of blocks only, except for first primary block)

Page 1

2/25/05 7110.66C APPENDIX 1. NATIONAL BEACON CODE ALLOCATIONS

2/25/05 7110.66C APPENDIX 1. NATIONAL BEACON CODE ALLOCATIONS

Table 1-2 ARTCC Code Categories

I Internal Departures E External Departures M Military S Special Use

Table 1-3 ARTCC Computer Adaptation Sequence

p Primary Code Block S Secondary Code Block T Tertiary Code Block (AAn) Adaptation Sequence (Priority)

Table 1-4 ARTCC Assignments

ARTCC Code Thru Code Priority KZAK 1100 ODAPS KZWY 1000 ODAPS ZAB 0700 EP-1 ZAB 2600 EP-2 ZAB 4100 ES-1 ZAB 1500 ES-2 ZAB 1600 ES-3 ZAB 7020 ET-1 ZAB 3020 ET-2 ZAB 6024 6047 ET-3 ZAB 5621 ET-4 ZAB 3134 ET-5 ZAB 3515 ET-6 ZAB IP-1 ZAB IP-2 ZAB IS-1 ZAN E ZAN E ZAN E ZAN E ZAN E ZAN E ZAN ES

Thru

Code

ARTCC ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAN ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZAU ZBW ZBW ZBW ZBW ZBW ZBW ZBW ZBW ZBW ZBW

Page 3

Code 5600 2200 2300 2500 4200 4500 4600 4700 5100 5200 5500 6300 3100 3500 1300 6200 6500 3100 3500 3200 5600 7200 2200 0500 4300 5300 5500 4700 0000 3400 3500 7300 2000 1400 1300 7000 2400 4600 5300

Priority ES

IM IM

EP-1 EP-2 EP-3 EP-4 ES-1 ES-2 ES-3 ES-4 ET-1 ET-2 IP-1 IP-2 IS-1 IS-2 IS-3 EP-1 EP-2 ES-1 ES-2 ES-3 ES-4 ET-1 ET-2 IP-1 IS-1

Thru

ARTCC ZBW ZBW ZBW ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDC ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZDV ZFW ZFW ZFW ZFW ZFW ZFW

Code 5500 4700 0000 7000 3600 0500 5600 2100 2400 1300 6500

Code Priority IS-2 IS-3 IS-4 EP-1 EP-2 EP-3 EP-4 EP-5 EP-6 ES-1 ES-2 ES-3 ET-1 ET-2 IP-1 IP-2 IS-1 IS-2 IS-3 EP-1 ES-1 ES-2 ES-3 ES-4 7453 ET-1 2235 ET-2 3427 ET-3 6655 ET-4 5642 ET-5 3377 ET-6 IP-1 IS-1 IS-2 IS-3 EP-1 EP-2 EP-3 ES-1 ES-2 ES-3

7110.66C APPENDIX 1: NATIONAL BEACON CODE ALLOCATIONS

7110.66C APPENDIX 1: NATIONAL BEACON CODE ALLOCATIONS

Thru

ARTCC ZFW ZFW ZFW ZFW ZFW ZFW ZFW ZFW ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZHU ZID ZID ZID ZID ZID ZID ZID ZID ZID ZID ZID ZID ZID ZJX ZJX

Page 5

Code 0613 7041 3021 3241 5100 5200 5300 4500 2400 2500 7400 7300 4000 2700 7200 6700 6600 4500 4600 4700 0000 5100 4200 4300 6600 6700 4000 3700 3400 1400 7300 2701 3001 2601 4200 4500 5500 1000 0700

Code Priority 0677 ET-1 7077 ET-2 3077 ET-3 3264 ET-4 IP-1 IP-2 IS-1 IS-2 EP-1 EP-2 ES-1 ES-2 ES-3 ES-4 ES-5 ET-1 ET-2 IP-1 IP-2 IP-3 IT-1 IT-2

S EP-1 EP-2 EP-3 ES-1 ES-2 ES-3 ES-4 2735 ET-1 3042 ET-2 2642 ET-3 IP-1 IP-2 IS-1 EP-1 EP-2

APPENDIX 1. NATIONAL BEACON.CODE ALLOCATIONS

APPENDIX 1. NATIONAL BEACON.CODE ALLOCATIONS

Thru

ARTCC ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZJX ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZKC ZLA ZLA ZLA ZLA ZLA ZLA ZLA ZLA ZLA ZLA ZLA ZLA

Code 2600 3000 3200 6200 1500 1600 7300 0600 2700 6700 6500 4200 5500 4300 7400 2100 1100 1700 5700 2500 7401 2001 3301 7101 6001 4600 4700 5200 7200 7300 1000 6700 2000 1300 5700 7100 7021 4600 4700 5300

Code Priority EP-3 ES-1 ES-2 ES-3 ES-4 ES-5 ES-6 ET-1 ET-2 ET-3 ET-4 IP-1 IP-2 IS-1 IS-2** EP-1 EP-2 EP-3 ES-1 ES-2 7440 ET-1 2020 ET-2 3311 ET-3 7120 ET-4 6023 ET-5 IP-1 IP-2 IS-1 EP-1 EP-2 EP-3 ES-1 ES-2 ES-3 ET-1 ET-2 7053 ET-3 P-1 IP-2 IS-1

Thru

ARTCC ZLA ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZLC ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA ZMA

Page 7

Code 5100 6000 0500 3100 4000 7401 2201 2501 4101 0701 5601 2301 6201 4300 5300 5200 4200 3600 3700 1400 2300 2100 1100 3500 5700 1300 3300 6600 6000 0500 2200 5600 7400 4600 4700 4500 0000 5300 5100

Code Priority IS-2 EP-1 ES-1 ES-2 ES-3 7411 ET-1 2211 ET-2 2512 ET-3 4121 ET-4 0730 ET-5 5611 ET-6 2311 ET-7 6211 ET-9 IP-1 IS-1 IS-2 IS-3 EP-1 EP-2 EP-3 ES-1 ES-2 ES-3 ES-4 ES-5 ES-6 ES-7 ES-8 ES-9 ET-1 ET-2 ET-3 ET-4 P-1 P-2 IP-3 IP-4 IS-1 IS-2

ARTCC

Thru

ZMA ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZME ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZMP ZNY ZNY ZNY ZNY ZNY ZNY ZNY ZNY ZNY ZNY

Code 4200 1500 5600 1600 0700 1000 1300 0611 0651 7001 3043 3201 2643 4300 5500

4500

2600

3000

3312

Code Priority IS-3 EP-1 EP-2 EP-3 ES-1 ES-2 ES-3 0612 ET-1 0662 ET-2 7040 ET-3 3060 ET-4 3240 ET-5 2677 ET-6 IP-1 IP-2 IS-1 IS-2 EP-1 EP-2 EP-3 ES-1 ES-2 ES-3 ET-1 3332 ET-2 1532 ET-3 IP-1 IP-2 IS-1 IS-2 EP-1 EP-2 EP-3 EP-4 EP-5 EP-6 EP-7 EP-8 EP-9 ES-1

Thru

ARTCC ZNY ZNY ZNY ZNY ZNY ZNY ZNY ZNY ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOA ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB ZOB

Page 9

Code 2300 4000 1000 6725 2200 4200 4500 4700 3200 3300 1700 6300 3600 3700 0601 2212 7001 7054 7441 3001 4200 4500 4300 5500 7000 5700 4100 7400 0700 6000 2500 1000 2100 7200 2300 0600 6300 5100 5200

Code Priority ES-2 ES-3 ES-4 6777 ET-1 ET-2 IP-1 IP-2 IS-1 EP-1 EP-2 ES-1 ES-2 ES-3 ES-4 0647 ET-1 2235 ET-2 7020 ET-3 7077 ET-4 7464 ET-5 3020 ET-6 IP-1 IP-2 IS-1 IS-2 IS-3 EP-1 EP-2 EP-3 EP-4 ES-1 ES-2 ES-3 ES-4 ES-5 ES-6 ET-1 ET-2 IP-1 IP-2