Order 3400.3H Airway Facilities Maintenance Personnel Certification Program
This document is cancelled. Cancelled by 3000.57. Check the official source before relying on it.
Text read by OCR from a scanned file (1 of 126 pages). Check the original, as some words may be misread.
App2-100 new corrected.pdf
ORDER
AIRWAY FACILITIES MAINTENANCE PERSONNEL CERTIFICATION PROGRAM
3/05/02
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
… Distribution: A-W(except AF)-2; A-W(AF)-3; A-X(AF)-3; Initiated By: AFZ-100 A-Y(ML/MA)-3; A-Z(CT-200/300/400/500)-2; A-FAF-0(MAX)
3400.3H
3/05/2002
RECORD OF CHANGES DIRECTIVE NO.
CHANGE
TO
SUPPLEMENTS
OPTIONAL
CHANGE
TO
SUPPLEMENTS
OPTIONAL
BASIC BASIC
FAA FORM 1320-5 (6-80) USE PREVIOUS EDITION
3400.3H
FOREWORD
3/05/2002 3400.3H
Page i (and ii)
FOREWORD
This order prescribes the procedures and assigns responsibility for administration of the Airway Facilities Maintenance Personnel Certification Program that assures the technical proficiency of personnel who are engaged in the certification of systems and facilities used in the National Airspace System (NAS). This order ensures that technical personnel responsible for maintenance and certification on facilities used in the NAS are proficient in performing assigned duties.
Certification of NAS systems and services is an inherently Government function. Through the Airway Facilities Maintenance Personnel Certification Program, the Federal Aviation Administration (FAA) grants certification credentials to individuals who have attained a professional level, and are responsible for the operation and performance of air traffic control facilities used by the aviation community. The personnel certification process is a confirmation that the individual possesses the requisite knowledge and skills to assume full responsibility for attesting to the operational status of a particular system, subsystem, equipment or service. This level of achievement is demonstrated by acquisition of certification authority and responsibility as defined herein.
ORIGINAL SIGNED BY
Alan R. Moore Director of Airway Facilities
3/05/2002 3400.3H
Page iii
TABLE OF CONTENTS Page No.
CHAPTER 1. GENERAL … 1
Paragraph 1. Purpose … 1 2. Distribution … 1 3. Cancellation … 1 4. Background … 1 5. Explanation of Changes … 1 6. Forms … 2 7. Definitions … 2 8. Objectives … 5 9-19. Reserved … 5
CHAPTER 2. PROGRAM ADMINISTRATION RESPONSIBILITIES … 7
20. FAA Airway Factlities Training Division Functions … 7 21. FAA Academy AF Division Functions … 7 22. Regional AF Division Functions … 8 23. AF System Management Office (SMO) Functions … 8 24. Operations Control Center(OCC) Functions … 9 25-29. Reserved … 10
CHAPTER 3. CERTIFICATION PROCESS … 11
30. General … 11 31. Individuals Requiring Certification Authority … 11 32. Certification Authority Phase … 11 33. Types of Certification Authority … 13 34. Service Certification Authority … 16 35. Retention/Revocation of Certification Authority … 17 36. Certification Responsibility Phase … 18 37. Retention/Revocation of Certification Responsibility … 18 38. Additional System, Subsystem, Equipment or Services … 19 39. Modernization and/or Equipment Replacement of Commissioned Facilities … 20
CHAPTER 4. THEORY-OF-OPERATIONS AND PERFORMANCE EXAMINATIONS21
40. General … 21 41. Theory-of-Operations Written Examinations … 21 42. Performance Examinations … 23 43. Unique Systems Examinations … 24 44. Use of FAA Theory-of-Operations and Performance Examinations … 24 45. Examination Validation and Updating … 24 46. Failed Examinations … 25 47-49. Reserved … 25
3400.3H 3/05/2002
Page iv
CHAPTER 5. RELATIONSHIP OF CERTIFICATION TO FAA EMPLOYMENT … 27
Paragraph 50. Qualification Standards … 27 51. Action Following Failure to Fulfill Certification Requirements … 27 52-59. Reserved … 27
CHAPTER 6. EXAMINERS/PROCTORS AND EXAMINATION PROCEDURES … 29
60. Selection of Examiners/Proctors … 29 61. Procedures Governing Administration of an Examination … 30 62. Retaking Examinations … 31 63-69. Reserved … 31
CHAPTER 7. FILES, FORMS, RECORDS, AND REPORTS … 33
70. Files … 33 71. Forms Description and Use … 34 72. Reports … 35 73. Computer Security, Privacy, and Freedom of Information Act … 35 74. Automation of Records … 35 75-79. Reserved … 36
CHAPTER 8. VERFICATION OF PERSONNEL MAINTAINING NON-FEDERAL FACILITIES … 37
80. General … 37 81. Responsibility for Non-Federal Facilities … 37 82. Procedures for Verification of Personnel Maintaining Non-Federal Facilities … 37 83. Effective Verification Date of Personnel Maintaining Non-Federal Facilities … 38 84. Interim Verification Procedures … 38 85. Verification Credentials and Records … 39 86. Development of Verification Examinations … 39 87. Grading … 40 88. Storage … 40 89. Training for Non-Federal Personnel … 40
APPENDIX 2. AUTOMATION DATA FIELDS1
3/05/2002 3400.3H
Page v
TABLE OF APPENDICES AND FIGURES
APPENDIX 1. LISTING OF FORMS … 1
FIGURE 1. Instructions for Preparing FAA Form 3400-3, AF Personnel Certification/ Verification Authority and Related Training Record (Annual Review) … 2
FIGURE 1-1. Sample FAA Form 3400-3 Annual Review … 3
FIGURE 2. Instructions for Preparing FAA Form 3400-3, AF Personnel Certification/ Verification Authority and Related Training Record (Certification Authority) … 5
FIGURE 2-1. Sample FAA Form 3400-3, Certification Authority … 7
FIGURE 2-2. Sample FAA Form 3400-3, Certification Authority (OCC) … 9
FIGURE 3. Instructions for Preparing FAA Form 3400-5, Certification Responsibility … 11
FIGURE 3-1. Sample FAA Form 3400-5, Certification Responsibility - Initial … 12
FIGURE 3-2. Sample FAA Form 3400-5, Certification Responsibility - Revision … 13
FIGURE 3-3. Sample FAA Form 3400-5, Certification Responsibility -
Initial (OCC) … 15
FIGURE 3-4. Sample FAA Form 3400-5, Certification Responsibility -
Revision (OCC) … 16
FIGURE 4. Instructions for Preparing FAA Form 3400-6, Certification Authority
Requirements Agreement … 18
FIGURE 4-1. Sample FAA Form 3400-6, Certification Authority Requirements
Agreement … 19
FIGURE 5. Instructions for Preparing FAA Form 3000-14, Airway Facilities Training Plan … 21
FIGURE 5-1. Sample FAA Form 3000-14, Airway Facilities Training Plan … 22
FIGURE 6. Instructions for Preparing FAA Form 3400-15, Performance Examination Cover Sheet … 23
FIGURE 6-1. Sample FAA Form 3400-15, Performance Examination Cover Sheet … 24
APPENDIX 2. AUTOMATION DATA FIELDS … 1
FIGURE 1. Personnel Certification/Verification and Related Training Automation Data Fields … 1
TABLE 1. Data Fields … 1
APPENDIX 7. RECORD OF CHANGES TO APPENDICES 3 THROUGH 61
3400.3H 3/05/2002
Page vi
APPENDIX 3. AIRWAY FACILITIES MAINTENANCE PERSONNEL CERTIFICATION PROGRAM EXAMINATIONS … 1
FIGURE 1. Theory-of-Operations Examinations & Equivalent Training/ Examinations … 3
FIGURE 2. Current Theory-of-Operations Examinations … 18
FIGURE 3. Current Performance Examinations … 21
FIGURE 4. Previous Theory-of-Operations Examinations … 25
FIGURE 5. Previous Performance Examinations … 29
APPENDIX 4. AIRWAY FACILITIES MAINTENANCE PERSONNEL CERTIFICATION PROGRAM ON-THE-JOB-TRAINING … 1
FIGURE 1. Current Formal On-the-Job-Training … 3
APPENDIX 5. AIRWAY FACILITIES MAINTENANCE PERSONNEL CERTIFICATION PROGRAM PERFORMANCE EXAMINATIONS … 1
FIGURE 1. Systems, Subsystems, Equipment or Service with Available Examinations … 3
FIGURE 2. Verification Examinations for Non-Federal Facilities … 8
FIGURE 3. Previous Verification Examinations for Non-Federal Facilities … 9
APPENDIX 6. INSTRUCTIONS FOR ACCESSING THE FAA ACADEMY AF TRAINING BULLETIN BOARD … 1
APPENDIX 7. RECORD OF CHANGES TO APPENDICES 3 THROUGH 6 … 1
FIGURE 1. History of Appendix Changes … 3
5. EXPLANATION OF CHANGES.
3/05/2002 3400.3H
CHAPTER 1. GENERAL
1. PURPOSE.
This order specifies the procedures necessary to implement and sustain a uniform national personnel certification program for Federal Aviation Administration (FAA) maintenance personnel and a verification program for non-Federal personnel.
2. DISTRIBUTION.
This order is distributed to division level in Washington headquarters; to branch level at the FAA Logistics Center; to branch level at the FAA Academy; to division level within ATC Engineering and Test, CNS Engineering and Test, Facilities Management, Aviation Simulation and Human Factors divisions at the FAA Technical Center; to branch level in the regional Airway Facilities divisions; and to all Airway Facilities field offices with a maximum distribution.
3. CANCELLATION.
Order 3400.3 G, Airway Facilities Maintenance Personnel Certification Program, dated April 13, 1998, is canceled.
4. BACKGROUND.
The National Airspace System (NAS) comprises a mixture of system, subsystem, equipment or services that support the air transportation complex in the United States. In order to validate the continued operation of the NAS, the performance of these system, subsystem, equipment or services are periodically certified by FAA technical personnel possessing the necessary technical proficiency. The Airway Facilities (AF) Maintenance Personnel Certification Program establishes a minimum standard of technical proficiency and assures technical competency of personnel. The guidelines in this order provide national direction for the acquisition and retention of personnel certification, not equipment certification. The technical specialist must satisfy theory-of-operations, on-the-job-training (OJT), and performance criteria as specified in this order to meet FAA requirements for certification. Following successful completion of the certification authority requirements, the FAA technical specialist may be assigned the responsibility of certifying specific system, subsystem, equipment or services. A technical specialist may exercise certification authority only when qualified and assigned certification responsibility.
5. EXPLANATION OF CHANGES.
This revision:
a. Establishes and identifies Operations Control Center (OCC) personnel certification functions.
b. Clarifies roles and responsibilities of SMO/OCC Managers in administration of the personnel certification program.
3400.3H 3/05/2002
c. Establishes new types of certification authority for Remote Certifications (Remote Regular and Remote Interim).
7. DEFINITIONS.
d. Updates FAA Form 3400-3, AF Personnel Certification/Verification Authority and Related Training Record, to include formal OJT documentation.
e. Adds a 120-day time window to the Mandatory Certification Date (MCD) process.
f. Clarifies that national performance exams are mandatory for non-certifiable equipment.
g. Emphasizes the formal OJT process throughout the order.
h. Removes Appendix 4, Personnel Certification Authority Acronyms, and refers users to FAA Order 6000.15, General Maintenance Handbook for Airway Facilities for current acronyms.
i. Removes Chapter 7 and incorporates the information into the appropriate paragraphs.
j. Adds a new Appendix 4, Figure 1, Airway Facilities Maintenance Personnel Certification Program On-The-Job-Training.
k. Adds Appendix 7, Record of Changes to Appendices 3 through 6.
6. FORMS.
Appendix 1, Listing of Forms, contains all of the forms used in this order. Forms for the Airway Facilities Maintenance Personnel Certification Program are available for downloading on the FAA Academy AF Training Bulletin Board. The instructions for accessing this bulletin board are found in Appendix 6, Instructions for Accessing the FAA Academy AF Training Bulletin Board. From the date of this order, all existing documentation will be retained as is. At the time of any new action, the procedures contained in this order are required for the documentation process.
7. DEFINITIONS.
Definitions of some of the terms used in the certification program may be found in the latest version of Order 6000.15. For the purpose of this order, the following definitions are used:
a. Annually. A scheduling term meaning once every year within an 11 to 13 month interval.
b. Certification Authority Requirements Agreements. A written acknowledgment signed by FAA management and FAA employees listing certification requirements of the technical position and a specific time frame during which the employees must acquire the needed certifications.
3/05/2002 3400.3H
c. Certification/Verification Authority. Substantiation that an individual possesses the minimum technical knowledge and proficiency to determine if a system, subsystem, equipment or service is capable of providing the advertised services to the user and the ability to correct malfunctions. For the purpose of this order, the terms "certification" and "verification" are synonymous for FAA technical specialists and non-Federal technicians. The term "certification" applies in the same manner to FAA personnel maintaining FAA facilities as the term "verification" applies to non-Federal personnel maintaining non-Federal facilities.
d. Certification Record Files. Files containing information from FAA Form 3400-3, Certification Authority; FAA Form 3400-5, Certification Responsibility; FAA Form 3400-6, Certification Authority Requirements Agreement and FAA Form 3400-15, Performance Examination Cover Sheet.
e. Certification Responsibility. The assignment of accountability for the determination of the operational status of a specific system, subsystem, equipment or service and the documentation into the official facility maintenance log.
f. Certification Authority Record. FAA Form 3400-3.
g. Domain. A geographical area, as well as the systems and services for which an AF Control Center is responsible.
h. Examiner. An individual designated in writing to monitor and/or conduct examinations.
i. First-Line Supervisors. An employee or designated individual whose primary responsibility includes the technical direction and/or supervision of personnel performing maintenance on and certification of NAS facilities.
j. Formal OJT. A bridge from theory-of-operations of system/subsystem/equipment or service training to developing requisite skills and knowledge in preparation for taking a performance examination to acquire certification authority.
k. Informal Training. Training that has not been approved by the Training Division.
l. Interim Certification Authority. Certification authority granted to cover system, subsystem, equipment or services pending establishment of a mandatory certification date or when theory-of-operations are no longer available.
m. Mandatory Certification Date. The date from which no new or existing Interim certification authority may be used and existing Interim certification authority must be revoked on a specific type system, subsystem, equipment or service. This date shall be as specified in this order or in subsequent changes to this order. The date is predicated upon the availability of both formal theory-of-operations training and performance examinations approved by the Training Division. The date shall be established 120 days from the date the performance examination was posted on the FAA Academy AF Training Bulletin Board, provided it meets the requirements of this paragraph.
3400.3H 3/05/2002
n. Non-Federal Technician. A technical person employed by a non-Federal sponsor to maintain and verify a non-Federal facility.
o. Non-Federal Facility. Public use facilities not owned by the U. S. Government that have been approved for Instrument Flight Rules (IFR) in the NAS.
p. Non-Federal Sponsor. The owner of a non-Federal facility. Reference the latest edition of Order 6700.20, Non-Federal Navigational Aids and Air Traffic Control Facilities.
q. Personnel Certification. Confirmation that the individual possesses the requisite minimum knowledge and skills to determine the operational status of a system, subsystem, equipment or service.
r. Performance Examination. An examination designed to test the technical specialist’s proficiency in measuring, evaluating, testing, and determining the accuracy and suitability of a particular type system, subsystem, equipment or service.
s. Proctor. An individual designated in writing to monitor theory-of-operations examinations.
t. Remote Certification Authority. Certification authority is granted to technical specialists who are responsible for accomplishing remote certifications through the use of RMM equipment and capabilities.
u. Service. Service is the end product resulting from a specific combination of system(s), subsystem(s), and/or equipment, delivered to a user (internal or external to the FAA) of the NAS.
v. Service Certification. The determination, validation, and documentation that a specific combination of system(s), subsystem(s), and/or equipment is providing or is capable of providing the advertised service to the user. The certifying specialist uses personal knowledge, technical analysis, observations, and inputs from other certified personnel to formulate a determination and accomplish service certification.
w. System, Subsystem, and Equipment Certification. The technical confirmation performed prior to commissioning and/or restoration after a scheduled or unscheduled interruption affecting certification parameters and periodically thereafter in accordance with applicable maintenance technical handbooks. The certification entry validates and documents that the system, subsystem, and/or equipment is providing or is capable of providing the advertised service to the user. It includes independent determination as to when a system, subsystem, equipment should be continued in, restored to, or removed from service.
RESERVED.
3/05/2002 3400.3H
Page 5 (and 6)
x. Technical Specialists. A generic title that includes, but is not limited to, electronic technicians, airway transportation system specialists, engineering technicians, maintenance mechanics, environmental support technicians, engineers, and non-Federal technicians.
y. Temporary Certification. Certification authority granted for limited periods of time as required by unusual circumstances.
z. Theory-of-Operations Examination. An examination to verify that a technical specialist possesses the necessary knowledge of principles and theory-of-operations for a system/ subsystem/equipment or service. Successful completion of this examination indicates a knowledge level equivalent to that of a graduate of an appropriate formal training course.
aa. Training Record File. Files containing training and examination (theory-of-operations, OJT, and performance) information.
8. OBJECTIVES.
The objectives of the AF Maintenance Personnel Certification Program are to:
a. Technical Competence. Assure technical competence of all technical personnel having direct responsibility for the continued safe operation of system, subsystem, equipment or services critical to the NAS.
b. Measurement Standards. Establish uniform minimum standards for measuring an individual’s technical proficiency.
c. Document Proficiency. Establish procedures for documenting the individual’s technical proficiency, for granting certification authority, and for assigning system, subsystem, equipment or service certification responsibility to FAA technical specialists.
9-19. RESERVED.
21. FAA ACADEMY AF DIVISION FUNCTIONS.
3/05/2002 3400.3H
CHAPTER 2. PROGRAM ADMINISTRATION RESPONSIBILITIES
20. FAA AIRWAY FACILITIES TRAINING DIVISION FUNCTIONS.
The Training Division’s responsibilities in the administration of the personnel certification program are to:
a. Provide overall direction and guidance.
b. Evaluate all aspects of the program.
c. Standardize all aspects of the program.
d. Review and update AF personnel certification policy and supporting orders.
e. Identify and specify the process and requirements for personnel certification.
f. Initiate and coordinate the development and validation of all performance examinations.
g. Require that contractors provide performance examinations for new equipment coming on-line.
h. Identify personnel certification requirements that support the system, subsystem equipment or services in the NAS.
i. Verify and coordinate the availability of training and examinations to support the personnel certification program.
j. Coordinate the personnel certification program with all related programs.
k. Maintain and update Appendix 1, Listing of Forms, and Appendix 2, Automation Data Fields.
21. FAA ACADEMY AF DIVISION FUNCTIONS.
The AF Division’s responsibilities in the administration of the personnel certification program are to:
a. Develop, revise, and validate theory-of-operations examinations.
b. Issue and grade theory-of-operations examinations.
c. Maintain appropriate records of examinations.
d. Distribute performance examinations and applicable changes.
e. Coordinate the revision of all existing performance examinations.
f. Develop supportive training material as directed.
g. Develop, administer, and maintain instructional training programs to support the personnel certification program.
h. Maintain and update appendices 3 through 7 of this order via the FAA Academy AF
23. AF SYSTEM MANAGEMENT OFFICE (SMO) FUNCTIONS.
3400.3H 3/05/2002
Training Bulletin Board.
22. REGIONAL AF DIVISION FUNCTIONS.
The regional AF Division Manager’s responsibilities for the personnel certification program are to exercise regional control of the program described in this order and issue any necessary supplemental or clarifying instructions. Functions which may be delegated to a designated representative within the regional office, to the AF System Management Office (SMO) Manager, or Operations Control Center Manager (OCC) are as follows:
a. Approve requests for theory-of-operations, OJT, and performance examinations for FAA personnel other than SMO/OCC personnel.
b. Approve requests for theory-of-operations, OJT, and performance examinations from sponsors of non-Federal facilities.
c. Coordinate with other agency offices on matters pertaining to the certification of individuals.
23. AF SYSTEM MANAGEMENT OFFICE (SMO) FUNCTIONS.
The prime responsibility for the administration of the personnel certification and verification programs in the field, rests within the SMO organization.
a. Functions which shall not be delegated below the SMO Manager level or anyone acting in that capacity are:
(1) Making the final determination whether technical specialists have demonstrated the minimum acceptable level of technical proficiency to perform actual duties.
(2) Granting, withholding, or revoking certification authority to FAA technical specialists, verification authority to non-Federal technicians, and/or assigning responsibility, shall be in writing.
(3) Taking action when a technical specialist fails to acquire or maintain the certification authority required for the position occupied.
(4) Determining certification requirements for all technical specialists maintaining NAS equipment within the SMO.
(5) Identifying positions that require certification authority.
(6) Designating, in writing, all examination officials and formal OJT instructors.
(7) Executing certification authority requirements agreements.
(8) Validating an annual review of individual certification proficiency and records.
b. Functions which may be delegated below the SMO Manager level are:
24. OPERATIONS CONTROL CENTER (OCC) FUNCTIONS.
3/05/2002 3400.3H
(1) Prescribing the extent of individual preparation necessary for examination or reexamination.
(2) Requesting, scheduling, administering theory-of-operations, OJT, and performance examinations.
(3) Exercising proper security precautions to avoid compromise of theory-of-operations examinations.
(4) Maintaining a file containing personnel certification or verification records on each individual requiring authority. The official certification/verification record file shall be maintained at the SMO in accordance with the latest edition of Order 1350.15, Records, Organization, Transfer, and Destruction Standards.
(5) Assuring that individuals assigned certification responsibilities have properly documented authorizations.
24. OPERATIONS CONTROL CENTER (OCC) FUNCTIONS.
The OCC Manager has the prime responsibility for the administration of the personnel certification program for OCC personnel. The OCC has been designated as a focal point for monitoring, control, and remote certification of all system, subsystem, equipment, or services in the NAS that have RMM capabilities.
a. Functions which shall not be delegated below the OCC Manager level or anyone acting in that capacity are:
(1) Granting certification authority and assigning certification responsibility to OCC technical specialists for OCC facilities identified in their cost center’s FSEP.
(2) Granting remote certification authority to OCC technical specialist for facilities within their domain.
(3) Assigning remote certification responsibility to OCC technical specialists for facilities within their domain. This responsibility assignment must be coordinated and documented in writing with the appropriate SMO Manager.
(4) Making the final determination whether OCC technical specialists have demonstrated the minimum acceptable level of technical competency to perform actual duties.
(5) Granting, withholding, or revoking certification authority to OCC technical specialists shall be in writing when the determination has been made.
(6) Taking action when an OCC technical specialist fails to acquire or maintain the certification authority required for the position occupied.
(7) Determining certification requirements for OCC technical specialists.
25-29. RESERVED.
3400.3H 3/05/2002
(8) Identifying OCC positions that require certification authority.
(9) Designating, in writing, all examination officials and formal OJT instructors.
(10) Executing certification authority requirement agreements.
(11) Validating an annual review of individual certification proficiency and records.
b. Functions which may be delegated below the OCC manager level are:
(1) Prescribing the extent of individual preparation necessary for examination or reexamination.
(2) Requesting, scheduling, administering theory-of-operations, OJT, and performance examinations.
(3) Exercising proper security precautions to avoid compromise of theory-of-operations examinations.
(4) Maintaining a file containing personnel certification records on each individual requiring authority. The official certification record file shall be maintained at the OCC in accordance with the latest edition of Order 1350.15, Records, Organization, Transfer, and Destruction Standards.
(5) Assuring that individuals assigned certification responsibilities have properly documented authorizations.
25-29. RESERVED.
3/05/2002 3400.3H
CHAPTER 3. CERTIFICATION PROCESS
30. GENERAL.
AF personnel certification is a two-phased process and consists of an authority and a responsibility phase. Personnel certification requirements are derived from the systems, subsystems, and services requiring certification. Acronyms for documenting personnel certifications are listed in the latest version of Order 6000.15, Appendix 3, Systems, Subsystems, and Services Requiring Certification.
32. CERTIFICATION AUTHORITY PHASE.
a. Certification Authority. The certification authority phase measures the technical specialist’s ability and knowledge of equipment theory-of-operations and requires a practical demonstration of skills by the administration of a performance examination by an appointed examiner. This phase ensures that technical specialists possess the minimum skills necessary to certify a given-type system, subsystem, equipment or service. Certification authority shall be documented on FAA Form 3400-3.
b. Certification Responsibility. The certification responsibility phase is the official assignment of a system, subsystem, equipment or service to a technical specialist in writing. After signatures of the technical specialist, the first-line supervisor, and the SMO/OCC Manager are recorded on FAA Form 3400-5, the specialist can exercise certification authority to certify a specific system, subsystem, equipment or service in the NAS.
31. INDIVIDUALS REQUIRING CERTIFICATION AUTHORITY.
Individuals required to hold certification authority for system, subsystem, equipment or services are identified below:
a. All FAA technical specialists assigned responsibility for certification of system, subsystem, equipment or services. SMO/OCC Managers shall establish position requirements based on operational needs.
b. Performance examiners.
c. Other FAA personnel as required by duties or administrative determinations.
32. CERTIFICATION AUTHORITY PHASE.
The certification authority phase involves the satisfactory completion of theory-of-operations, formal OJT, and performance requirements as specified in this directive on a specific type of system, subsystem, equipment or service and documented on FAA Form 3400-3.
a. Certification Authority. Acquisition of certification authority is a four-step process that requires:
(1) Completion of theory-of-operations.
(2) Completion of formal OJT.
(3) A demonstration of performance proficiency.
(4) A review and determination by the SMO/OCC Manager that all procedures have been properly followed and supporting documentation has been prepared.
3400.3H 3/05/2002
b. Theory-of-Operations Requirement. The theory-of-operations requirement is the first step of the personnel certification authority process and confirms that the individual possesses satisfactory knowledge of system, subsystem, equipment theory-of-operations or the integration of components that comprise a service. There are several methods listed below by which this may be accomplished. The method used will be determined by the SMO/OCC Manager and the employee’s supervisor. This training shall be applicable to the type of system, subsystem, equipment or service for which the certification authority is required.
(1) Resident training is training conducted at the FAA Academy by an FAA instructor, a designated out-of agency trainer, or via Computer Based Instruction (CBI).
(2) Theory-of-operations examination is a Training Division/FAA Academy approved written examination which measures the level of knowledge required by paragraph 32a(1).
(3) Distance Learning (DL) is using a training methodology where an instructor is not required to be collocated with the student. DL is a Training Division/FAA Academy approved method and includes but is not limited to correspondence study, CBI, and Interactive Video Teletraining (IVT).
(4) Equivalent training is training obtained from sources other than the FAA which the Training Division/FAA Academy deems to be equivalent to FAA-sponsored resident training. Requests for acceptance of this training must be recommended by the SMO/OCC Manager and forwarded through the regional AF Division Manager to the Training Division/FAA Academy for review and approval. New equivalency data, or changes, will be updated in Appendix 3 and posted on the FAA Academy AF Training Bulletin Board.
c. Formal OJT Requirements. The second step of the personnel certification authority process is formal OJT, which is a bridge from theory-of-operations of system, subsystem, equipment or service training to developing requisite skills and knowledge in preparation for taking a performance examination to acquire certification authority or the granting of Interim Certification Authority. FAA Forms 3400-15 and 3400-3 shall be used to document the completion of OJT requirements. A list of formal OJT is provided in Appendix 4, Figure 1. The OJT phase of the personnel certification process shall be administered in accordance with the latest version of Order 3000.10, Airway Facilities Maintenance Technical Training Program
d. Performance Requirements. The third step of the personnel certification authority process requires successful demonstration of performance proficiency measured by a combination of successful accomplishment of work assignments and passing a performance examination. Following administration of a performance examination, the examiner will submit the original examination to the SMO/OCC Manager. Successful completion confirms the technical specialist’s familiarity with a specific type of system, subsystem, equipment or service as well as their knowledge and ability to perform necessary measurements, adjustments, and fault diagnosis, or to make software corrections where applicable. This step shall not occur before confirmation that the theory-of-operations and OJT requirements have been successfully completed. The methods by which performance proficiency may be accomplished are listed below. The method used will be determined by the SMO/OCC Manager and the employee’s supervisor.
33. TYPES OF CERTIFICATION AUTHORITY.
3/05/2002 3400.3H
(1) Experience. For experience to be creditable, the individual must have received at a minimum, prior to the mandatory certification date, a satisfactory performance rating for a 12month period during which the individual had Interim certification authority and assigned responsibility on the system, subsystem, equipment, or service for which certification authority is sought. The first-line supervisor shall document the time period during which the experience was gained. This documentation and the time period shall be recorded in the individual’s training and certification record when approved. Experience gained prior to satisfying the theory-of-operations requirements on the subject is creditable. Failure to satisfy the theory-ofoperations requirements means credit for prior experience cannot be granted.
(2) Performance Examinations. After the mandatory certification date, the technical specialist must satisfactorily complete a Training Division approved performance examination conducted by an authorized examiner. The examination measures the specialist’s ability to make system, subsystem, or equipment adjustments, check critical parameters, and tests the requisite specialized knowledge to adequately investigate, analyze, test, and correct system, subsystem, equipment, or service deficiencies to restore and ensure continuous reliable operation. A separate performance examination is required on each different type of system, subsystem, equipment, or service for which the individual needs certification authority. FAA Form 3400- 15, as illustrated in appendix 1, figure 6-1 shall be used to document this process.
e. Review and Confirmation. The fourth step in the personnel certification authority process is accomplished when the SMO/OCC Manager reviews the results of all testing, assures that all supporting documentation is correct, and determines that certification authority can be granted. Certification authority is granted with an entry on FAA Form 3400-3 signed by the SMO/OCC Manager. As part of this confirmation process, the SMO/OCC Manager will determine what type of certification authority to grant.
33. TYPES OF CERTIFICATION AUTHORITY.
The five possible types of certification authority are:
a. Regular Certification Authority. Regular certification authority on a system, subsystem, equipment or service may be granted to a technical specialist by the SMO/OCC Manager after satisfying the approved theory-of-operations, formal OJT, and performance requirements. The OCC Manager may grant Regular certification authority to OCC technical specialists for only those OCC facilities identified in their cost center’s FSEP. Regular certification authority may be granted when all of the requirements for Interim certification conversion are met.
b. Interim Certification Authority. Between the installation of equipment and development of Training Division approved theory-of-operations, formal OJT, and performance examinations, Interim certification authority may be granted by the SMO Manager to employees who have successfully completed documented formal/informal training and formal OJT. The OCC Manager may grant Interim certification authority to OCC technical specialists for only those OCC facilities identified in their cost center’s FSEP. When the Training Division has advised that no theory-of-operations methods listed in paragraph 32b are available (i.e. for older equipment), Interim certification authority may be granted to employees who have successfully completed documented informal training. For any Interim certification authority, the manager must consider the technical specialist sufficiently proficient to certify the type of system, subsystem, equipment, or service for which the interim is issued. For purposes of Interim
3400.3H 3/05/2002
certification, informal training is that training conducted at the regional or SMO level by another technician or a manufacturer’s representative, or another course on similar equipment taken previously. Interim certification authority based on informal training cannot be converted to Regular certification authority.
(1) Conversion of Interim Certification Authority. Interim certification authority may be converted to Regular certification authority on system, subsystem, equipment, or services provided:
(a) Technical specialist has met the requirements of paragraph 32a, and
(b) Technical specialist has been granted interim certification authority for 12 months and has at least 12 months of satisfactory performance while having full maintenance responsibility, and
(c) The Interim certification authority was granted before the mandatory certification date.
(2) Interim Certification Authority Not Converted. If an Interim certification authority was not converted after meeting all the requirements of paragraph 33b and the mandatory certification date was established, the Interim certification authority may be converted to Regular certification authority or the performance examination may be taken at the discretion of the SMO/OCC Manager.
(3) Revocation of Interim Certification Authority. Interim certification authority shall be revoked and fully documented on FAA Form 3400-3 when any of the following criteria are met:
(a) The mandatory certification date is reached.
(b) A technical specialist fails the formal training course, the theory-of-operations examination, or the performance examination that pertains to the specific Interim certification authority.
(c) Regular certification authority is granted on the same system, subsystem, equipment or service.
(d) Certification responsibility is no longer assigned.
c. Temporary Certification Authority.
(1) Temporary certification authority may be granted by the SMO/OCC Manager on a specific type of system, subsystem, equipment or service, after the mandatory certification date has passed, based upon an administrative determination of need. The OCC Manager may grant Temporary certification authority to technical specialists for only those OCC facilities identified in their cost center’s FSEP. Temporary certification authority should only be granted during UNUSUAL circumstances; i.e., when there is an immediate need and the normal process would take too long. This authority may be granted for no longer than 3 months at a time and shall not be granted to the same individual more than twice within any 12-month period on the same system, subsystem, equipment or service. The granting of such Temporary certification
3/05/2002 3400.3H
authority shall be formally and fully documented. The revocation date shall be identified on the FAA Form 3400-3 at the time this authority is granted. The SMO/OCC Manager shall be satisfied with the proficiency of the technical specialist. When granting Temporary certification authority to an individual who has not previously met applicable theory-of-operations requirements, training used in lieu of theory-of-operations requirements must be related.
EXAMPLE: A technical specialist certified on a Mark 1B instrument landing system (ILS) may be granted Temporary certification authority for a Mark 1D ILS. On the other hand, training on communications equipment cannot be considered applicable to ILS.
(2) Temporary certification authority shall not be granted to technical specialists who, on the last attempt, failed either the theory-of-operations or performance options for the pertinent system, subsystem, equipment or service.
d. Remote Regular Certification Authority. Remote Regular certification authority on a system, subsystem, equipment or service may be granted to technical specialists who are responsible for accomplishing remote certifications through the use of RMM equipment and capabilities. It is intended for AF Control Center personnel, although other technical specialists may also be issued Remote Regular certification authorities when required by their position. In order to gain Remote Regular certification authority, the technical specialist must satisfy the approved remote theory-of-operations, formal OJT, and performance requirements.
e. Remote Interim Certification Authority. Remote Interim certification authority may be granted to technical specialists who are responsible for accomplishing remote certifications through the use of RMM equipment and capabilities. It is intended for AF Control Center personnel, although other technical specialists may also be issued Remote Interim certification authorities when required by their position. Between the installation of equipment and development of a Training Division approved theory-of-operations, formal OJT, and performance examinations, Remote Interim certification authority may be granted by the SMO/OCC Manager to employees who have successfully completed documented formal or informal training. When the Training Division has advised that no theory-of-operations methods listed in paragraph 32b are available (i.e. for older equipment), Remote Interim certification authority may be granted to employees who have successfully completed documented informal training. For any Remote Interim certification authority, the manager must consider the technical specialist sufficiently proficient to certify the type of system, subsystem, equipment or service for which the Remote Interim is issued. For purposes of Remote Interim certification, informal training is that training conducted at the regional or SMO/OCC level by another technician or a manufacturer’s representative, or another course on similar equipment taken previously. Remote Interim certification authority based on informal training cannot be converted to Remote Regular certification authority.
(1) Conversion of Remote Interim Certification Authority. Remote Interim certification authority may be converted to Remote Regular certification authority on systems, subsystem, equipment or services provided:
(a) Technical specialist has met the requirements of paragraph 32a, and
34. SERVICE CERTIFICATION.
3400.3H 3/05/2002
(b) Technical specialist has been granted Remote Interim certification authority for 12 months and has at least 12 months of satisfactory performance while having remote maintenance responsibility, and
(c) The Remote Interim certification authority was granted before the mandatory certification date.
(2) Remote Interim Certification Authority Not Converted. If a Remote Interim certification authority was not converted after meeting all the requirements of paragraph 33e and the mandatory certification date was established, the Remote Interim certification authority may be converted to Remote Regular certification authority or the performance examination may be taken at the discretion of the SMO/OCC Manager.
(3) Revocation of Remote Interim Certification Authority. Remote Interim certification authority shall be revoked and fully documented on FAA Form 3400-3 when any of the following criteria are met:
(a) The mandatory certification date is reached.
(b) A technical specialist fails the formal training course, the theory-of-operations examination, or the performance examination that pertains to the specific Remote Interim certification authority.
(c) Remote Regular certification authority is granted on the same system, subsystem, equipment or service.
(d) Certification responsibility is no longer assigned.
34. SERVICE CERTIFICATION.
Service certification ensures that all system, subsystem, equipment or services are capable of providing their advertised services and have a current overall certification. The servicecertifying official uses personal knowledge, technical determination, observations, and inputs from other certified personnel.
a. Granting Service Certification Authority. Authority shall be granted for all services identified in the latest version of Order 6000.15.
b. Documenting Service Certification Authority. Authority shall be documented on FAA Form 3400-3.
(1) Theory requirements shall be satisfied when a Training Division approved theory-ofoperations training has been successfully completed on a major system type that makes up the service; i.e., localizer (LOC) training for ILS service.
(2) Performance requirements shall be based on Training Division approved performance examinations.
(3) Interim or Remote Interim certification authority may be granted when theory-ofoperations and performance examinations are not available, provided conditions in paragraph 33b or 33e are met. The appropriate AF Control Center personnel may be granted Interim or Remote Interim service certification authority in accordance with paragraph 32 pending the Training Division approval of theory-of-operations and performance examinations. This Interim
36. CERTIFICATION RESPONSIBILITY PHASE.
3/05/2002 3400.3H
or Remote Interim certification may not be converted to Regular or Remote Regular certification authority without meeting the requirements of paragraph 32a.
35. RETENTION/REVOCATION OF CERTIFICATION AUTHORITY.
a. Retention of Certification Authority. When an individual acquires certification authority for a specific type of system, subsystem, equipment or service, the certification authority is retained unless there is a change in status.
b. Revocation of Certification Authority. Certification authority shall be revoked only as a result of one of the circumstances described below:
(1) When the end date of the temporary certification authority period is reached.
(2) When there is a subsequent failure of formal training or examination pertinent to an Interim or Remote Interim certification authority.
(3) When Temporary, Interim, or Remote Interim certification authority is replaced by Regular or Remote Regular certification authority for the same system, subsystem, equipment or service.
(4) When it is determined by the SMO/OCC Manager that the proficiency (performance and/or knowledge of theory) of a technical specialist has deteriorated to a level such that continued certification of a system, subsystem, equipment or service might render it unusable or unsafe for use. The employee shall receive written notification within 24 hours of such action, and is required to promptly acknowledge receipt to the office issuing the revocation notice. The date of the notification and the action shall be entered in the employee’s record. Immediately upon revocation of certification authority, the employee shall be counseled and a written formal program designed to restore proficiency shall be implemented. The employee shall be given an opportunity to reacquire certification authority in accordance with the process described in this order.
(5) After a period of inactivity of 2 years or longer, the proficiency of the technical specialist will be reviewed by the immediate supervisor prior to assignment/reassignment of certification responsibility for a particular system, subsystem, equipment or service. Following the review, the supervisor will forward to the SMO/OCC Manager a written assessment/ recommendation as to whether the employee’s certification authority should be retained or revoked. The extent of this review shall be based upon the supervisor’s judgment. This review may vary from observation of the employee’s on-the-job work performance to requiring the employee to retake the theory-of-operations and/or performance examination(s). Inactivity shall not be an automatic cause for revocation of certification authority from a technical specialist.
(6) When certification authority is discovered to have been erroneously granted, it shall be revoked by the SMO/OCC Manager, and the employee notified in writing.
c. Changes to Certification Authority Prerequisites. Certification authority previously granted shall not be affected by later changes in examination and/or course configurations.
36. CERTIFICATION RESPONSIBILITY PHASE.
Assignment of certification responsibility is the final phase of the personnel certification process. It is this phase that enables the technical specialist to exercise certification authority to certify a
37. RETENTION/REVOCATION OF CERTIFICATION RESPONSIBILITY.
3400.3H 3/05/2002
discrete system, subsystem, equipment or service. Assignment of certification responsibility does not automatically follow the acquisition of certification authority. Certification authority may be exercised only after responsibility is assigned in writing.
a. Certification Responsibility Assignment. The SMO/OCC Manager assigns certification responsibility in writing on FAA Form 3400-5. When the OCC Manager assigns remote certification responsibility to OCC technical specialists for facilities within their domain, this responsibility assignment must be coordinated and documented in writing with the appropriate SMO Manager. A SMO/OCC Manager may assign a technical specialist such responsibility provided all the following criteria are met:
(1) The technical specialist possesses proper personnel certification authority.
(2) The technical specialist’s supervisor:
(a) Is satisfied with the technical specialist’s level of proficiency.
(b) Has prepared a written statement attesting to the fact that the technical specialist has acquired the practical experience and proficiency needed to perform the assignment. A signed FAA Form 3400-5 may suffice as this written statement.
(3) The SMO/OCC Manager has ascertained that the proposed certification responsibility assignments are required and are compatible with the technical specialist’s position.
b. Developmental Certification Responsibility Assignment. Certification responsibility assignments to FAA developmental technical specialists who have not achieved full journey level, but who have acquired certification authority, shall be in accordance with all legal, regulatory, and procedural requirements as appropriate.
c. Emergency Certification Responsibility Assignment. Emergency responsibility assignments may be made in the event of an emergency situation, as defined in the current emergency readiness order. The SMO/OCC Manager may assign certification responsibility through the most expedient means; i.e., telephone, messenger, electronic mail, provided this action is followed up in a timely manner with the appropriate documentation in accordance with this order.
37. RETENTION/REVOCATION OF CERTIFICATION RESPONSIBILITY.
a. Retention of Certification Responsibility. Once a technical specialist is assigned certification responsibility for a specific system, subsystem, equipment or service, the first-line supervisor and the technical specialist shall ensure retention of proficiency as long as the certification responsibility remains in effect.
b. Review of Certification Responsibility. The first-line supervisor shall review the proficiency of each technical specialist assigned certification responsibility. This may be a formal examination of ability to perform designated procedures and adjustments, or an informal review by observation of on-the-job performance. The informal review can include site visits, casual observations, restorations, AT reports, log reviews, or other information gathered in the normal routine of the supervisor’s duties. A proficiency review shall be accomplished under any of the following conditions and appropriate written recommendations forwarded to the SMO/OCC Manager for their review and inclusion in the technical specialist’s technical certification and related training record.
38. ADDITIONAL SYSTEM, SUBSYSTEM, EQUIPMENT, OR SERVICES.
3/05/2002 3400.3H
(1) Annually (see paragraph 7a).
(2) Whenever a question arises concerning the individual’s technical proficiency.
c. Documenting the Review. The SMO/OCC Manager confirms the supervisor’s review and recommendation. This review may include supporting documents such as certification authority records, Facility Service and Equipment Profile (FSEP), and certification responsibility assignment records. This proficiency review shall be documented and signed by the SMO/OCC Manager on the technical specialist’s certification authority and related training record. A separate FAA Form 3400-3 shall be utilized to document and record line entries for annual proficiency reviews. No other entries will be entered on the annual review form. Refer to sample in appendix 1, figure 1-1.
d. Revocation of Certification Responsibility. Certification responsibilities shall be terminated in writing under the following conditions:
(1) When certification authority is revoked.
(2) When a facility for which responsibility is assigned is decommissioned.
(3) When a facility is modified or equipment replaced with systems requiring additional training and/or new theory-of-operations and performance examinations that invalidate the technical specialist’s previous certification authorities.
(4) When proficiency review in paragraph 37b determines that it is warranted.
(5) When it is determined by management that the responsibility assignment is no longer required.
(6) When a technical specialist is transferred to another organization; i.e., System Support Center (SSC), SMO, OCC, etc.
(7) When any personnel action results in separation from the FAA.
38. ADDITIONAL SYSTEM, SUBSYSTEM, EQUIPMENT, OR SERVICES.
The requirements for certification authority for similar system, subsystem, equipment, or services may have the same theory-of-operations requirements and some of the same performance requirements. After certification authority has been granted on a system, subsystem, equipment, or service, it is necessary to complete only those portions of the performance examination that are unique to the similar or new system, subsystem, equipment, or service.
39. MODERNIZATION AND/OR EQUIPMENT REPLACEMENT OF COMMISSIONED FACILITIES.
3400.3H 3/05/2002
39. MODERNIZATION AND/OR EQUIPMENT REPLACEMENT OF COMMISSIONED FACILITIES.
A new certification authority will be required following any NAS modernization project, major equipment modification or replacement, which results in a hybrid system or equipment having new theory-of-operations requirements. The Training Division will determine when a new certification authority is required.
41. THEORY-OF-OPERATIONS WRITTEN EXAMINATIONS.
3/05/2002 3400.3H
CHAPTER 4. THEORY-OF-OPERATIONS AND PERFORMANCE EXAMINATIONS
40. GENERAL.
All examinations (theory-of-operations and performance) used in the certification program shall be developed and validated under the administrative control of the Training Division. When made available, these examinations shall be used to determine whether the examinee possesses the theoretical knowledge and practical techniques required to certify a system, subsystem, equipment or service. Equipment theory-of-operations and performance examinations are comprehensive in scope, covering not only the equipment within a system, but also the auxiliary equipment considered to be part of the system. Software examinations cover utility, support, and diagnostic programs as well as the programs, subprograms, routines, and subroutines of a major program system. Only examinations authorized by the Training Division shall be used as a basis for granting Regular or Remote Regular certification authority.
41. THEORY-OF-OPERATIONS WRITTEN EXAMINATIONS.
In order to provide a method leading to certification authority, other than through resident training, a written theory-of-operations examination may be used. The scope and depth of a particular examination is representative of the knowledge required to perform effectively on the job. Those, who have had prior training or experience that indicates the attainment of this knowledge level, qualify to take the theory-of-operations examinations. Prerequisites for the theory of operations examination(s) are the same as for the course(s) to be bypassed. Where resident training is not available, the theory-of-operations examination is the principle means of measuring the understanding of a system, subsystem, equipment or service theory of operation. When a selection is made to fill a vacancy, the method of obtaining certification shall not be a factor in the selection.
a. Request for Theory-of-Operations Examinations.
(1) These examinations shall not be requested unless there is a reasonable expectation that they will be passed. Under no circumstances shall a theory-of-operations examination be used as a screening device to determine the probability of any technical specialist passing the corresponding FAA Academy course.
(2) Theory-of-operations examinations shall be requested by the regional AF Division Manager or SMO/OCC Manager as appropriate. The examinations may be taken via CBI using CBI terminal identifier or a paper copy mailed to the facility.
(3) These examinations will be maintained by the Examination Control Center (ECC) at the FAA Academy.
(4) If not proctored by the Program Support Staff, all examinations will be administered by a supervisor or monitor authorized in writing by the SMO/OCC Manager. The individual appointed to supervise the examination will serve as timekeeper, give instructions, check examinee’ s answer sheet for complete entries, fill out all applicable paperwork, reseal examination along with scratch paper and notes, and ensure mail-out paper tests are returned to the ECC via certified mail.
3400.3H 3/05/2002
(5) Each request shall include the examinee’s name, social security number, and the SMO/OCC. If the examination is not administered to the designee within 30 calendar days after receipt, it shall be returned UNOPENED to the ECC. The regional AF Division Manager or SMO/OCC Manager may use the examination for another technical specialist PROVIDED this is not a retake examination. If it is to be a retake examination, coordination with the ECC must be accomplished to assure it would be appropriate. A letter of explanation concerning the name change shall accompany the completed examination when returned to the ECC.
(6) The completed examination shall be returned immediately to the ECC. The regional AF Division Manager or SMO/OCC Manager shall be advised of the grade as quickly as possible. In the event of a failure, a summary of the individual’s weak points shall accompany the grade report if the grade equals or exceeds 50 percent. No summary will be provided for grades below 50 percent as all areas are considered weak.
(7) The responsibility for distribution of examination grade reports resides with the regional AF Division or SMO/OCC Manager. Mail-out test scores are posted via CBI by the ECC for viewing or documentation purposes until recorded in Consolidated Personnel Management Information System (CPMIS).
b. Integrity of Theory-of-Operations Examinations. All segments of the agency concerned with the certification process shall maintain security in the handling of written examinations. Compromise of examinations in any form is a serious violation of the rules of conduct and discipline. Violations in this area shall require official disciplinary action by the appropriate official.
(1) Security of theory-of-operations examinations includes, but is not limited to, the following:
(a) Locked and secured storage (combination lock or equivalent).
(b) An accountability system in place to ensure examinations are returned within 30 calendar days after receipt.
(c) Distribution of examinations limited to certified mail, responsible messenger, or CBI.
(d) Examinations are kept sealed except when being administered.
(e) All working notes are returned with the completed examination.
(f) Examination contents shall not be discussed or otherwise compromised.
(g) Absolutely no reproduction or copying of any part of the examination.
(h) Use only the materials provided by the ECC for a "closed-book" examination.
(2) Any person having personal knowledge of a compromise on any segment of the written examination shall immediately advise the SMO/OCC Manager or the regional AF Division Manager of the incident. Anyone having knowledge of a violation and failing to report it, or take appropriate action, may be subject to the same penalty as the individual guilty of the violation.
42. PERFORMANCE EXAMINATIONS.
3/05/2002 3400.3H
c. Deviations from Theory-of-Operations Examinations. Normally, the theory-ofoperations examination must be completed in its entirety in order to receive credit on the examinee’s training record and equivalency. When an intermix of equipment results in a configuration where only portions of existing examinations are appropriate, the relevant portions may be used; i.e., Mark 1A localizer (LOC), and Mark 1B glide slope (GS). The determination of the portion to be used should be made by the examinee’s supervisor or examiner and coordinated with the SMO/OCC Manager. The ECC shall be notified in writing and the entries in the technical specialist’s record shall reflect the parts of the examination that were taken.
d. Theory-of-Operations Equivalency. The technical specialist certified through a system theory-of-operations examination shall be considered equal to a technical specialist certified through formal agency training.
42. PERFORMANCE EXAMINATIONS.
Performance examinations are used to measure proficiency as demonstrated by a technical specialist. Examinations may vary in length according to the complexity and scope of the system, subsystem, equipment or service. Practical demonstrations may involve adjustments or software program changes with observable results and shall also include analysis and correction of maladjustments or faults introduced into the equipment. A series of adjustments or software program changes may be required before an accurate measurement is made. Once the examinee has completed an operation, the examiner will grade the performance. Certain operations and critical parameters are considered LOCKOUT items and failure on any one of these items constitutes a FAILURE OF THE ENTIRE EXAMINATION. The use of reference material during the performance examination is encouraged.
a. Deviation from the Printed Examination Allowed. Any deviation from the Examination must have the SMO/OCC Manager’s approval prior to the administration of the examination. The examinee shall be notified in writing of any deviation from the performance examination prior to taking the examination, and that the deviation has been approved by the SMO/OCC Manager. The examinee shall be advised that the examination will be graded and must be given enough time to prepare.
(1) The examiner may deviate from the performance examination to assure the required proficiency. Operations and questions other than those listed on the performance examination may be used to assure the examinee’s knowledge of the entire system.
(2) The examiner may change the performance examination to make it compatible with the actual system used. Recommended changes, which should be made to examinations because of changes in maintenance procedures, system configurations, or testing equipment/techniques, shall follow the procedures outlined in the performance examination instructions to the examiner. For non-Federal facilities not having an existing performance examination, refer to paragraph 86.
b. Source of Performance Examinations. ECC is located at the FAA Academy and will maintain a hard copy of the most current performance examinations for distribution. The most current examinations shall be utilized and can be requested from the ECC or downloaded from the FAA Academy AF Training Bulletin Board (Refer to appendix 6).
45. EXAMINATION VALIDATION AND UPDATING.
3400.3H 3/05/2002
c. Ordering and Handling of Performance Examinations. Secure handling of performance examinations is not required. Performance examinations should be provided to the certification candidate well in advance of administration so that they will be fully aware of what the examination consists of and the test equipment required.
d. Use of Performance Examinations as Study Guide. Where no formal OJT exists, a performance examination may be used as a study outline. The individual assigned to provide OJT shall not be the performance examiner.
e. Use of Performance Examinations on Non-Certifiable Systems. Training Division approved performance examinations shall be administered for personnel completing training on non-certifiable systems after the date of this order. Acronyms for these systems may be found in the current FSEP. Examinations of this type are utilized for measuring technical proficiency on system, subsystem or equipment that, though important to the NAS, do not require certification. Completion of performance examinations shall be documented on the reverse side of FAA Form 3400-3. Administration of locally developed performance examinations will be left to the discretion of the SMO/OCC Manager. For the purposes of non-certifiable system examinations, the examiner must be proficient on the system as determined by the SMO/OCC Manager.
f. Documentation Process. The Performance Examination Cover Sheet, FAA Form 3400- 15, as illustrated in appendix 1, figure 6-1, shall be used to document this process.
43. UNIQUE SYSTEMS EXAMINATIONS.
There are several one-of-a-kind or limited-number "unique" systems. These systems shall be included in the national personnel certification program if they qualify. Any region having such a system shall advise the Training Division on how the region plans to proceed with development of the necessary examinations. Existing theory-of-operations and performance examinations on similar equipment may be used where appropriate. Draft copies of the newly developed examinations shall be forwarded to the Training Division through the appropriate AXX-400 training representative. The Training Division shall review, validate, and coordinate with other regions having a like system for inclusion in the National program. REGIONS SHALL NOT USE UNAUTHORIZED EXAMINATIONS AS A BASIS FOR THE GRANTING OF CERTIFICATION CREDENTIALS.
44. USE OF FAA THEORY-OF-OPERATIONS AND PERFORMANCE EXAMINATIONS.
The inventory of FAA theory-of-operations and performance examinations shall be used by FAA and non-Federal technicians. There shall be no duplication of effort to develop unique examinations solely for the purpose of examining non-Federal technicians.
45. EXAMINATION VALIDATION AND UPDATING.
Theory-of-operations and performance examinations are constantly being reviewed and updated. Examinations are combined or eliminated when found to be redundant or obsolete. Any examiner who detects improper questions or measurements, incorrect references, or who is administering an examination that is not intended for the system involved should include the appropriate comments with the examination and return it to the appropriate office. Theory-ofoperations examinations shall be forwarded to the ECC. Performance examinations shall be forwarded to the Training Division. The ECC shall coordinate all revisions to theory-of-
47-49. RESERVED.
3/05/2002 3400.3H
Page 25 (and 26)
operations examinations and submit them to the Training Division for review and approval. The regional AF Division Manager will also be advised through the appropriate channels of any improper questions, procedures, or references submitted.
46. FAILED EXAMINATIONS.
a. Failed Theory-of-Operations Examinations. Examinations, answer sheets, comments, etc., pertaining to a failed theory-of-operations examination must be retained by the ECC in accordance with the latest version of Order 1350.15.
b. Failed Performance Examinations. Performance examination failures shall clearly list the reasons for failure on FAA Form 3400-15 and shall be retained in the employee’s certification and training history at the SMO/OCC.
47-49. RESERVED.
51. ACTION FOLLOWING FAILURE TO FULFILL CERTIFICATION REQUIREMENTS.
3/05/2002 3400.3H
Page 27 and 28
CHAPTER 5. RELATIONSHIP OF CERTIFICATION TO FAA EMPLOYMENT
50. QUALIFICATION STANDARDS.
Qualification requirements have been established for AF technical specialists by the appropriate classification guides. The guides additionally require that most FAA technical specialists obtain and retain certification authority and responsibility required by their positions. Procedures for obtaining this authority and responsibility are described in this order. Failure to obtain or retain the appropriate certification authority and responsibility may constitute disqualification for the position.
a. Initial Certification Requirements. The SMO/OCC Manager shall assure that FAA employees new to a position requiring certification authority are counseled on the certification requirements for that position. A training plan shall be established using FAA Form 3000-14, AF Training Plan, to ensure the employee fully qualifies for the position within a reasonable time frame. FAA Form 3400-6, Certification Authority Requirements Agreements shall be executed committing FAA management and the employee to a program to achieve the required certifications. The SMO/OCC Manager may extend the time limits for completing the agreement, if conditions beyond the control of the employee are encountered. Refer to appendix 1, figures 4-1 and 5-1 for samples.
b. Additional Certification Requirements. Journey-level employees who are otherwise fully qualified for their positions are frequently faced with new requirements for additional certifications due to new facilities and equipment upgrades. When this occurs, the first-line supervisor shall develop a training plan using FAA Form 3000-14 that will meet the additional requirements. If the employee fails to satisfactorily complete the prescribed training plan, the failure may be an employee performance problem and appropriate action should be taken.
51. ACTION FOLLOWING FAILURE TO FULFILL CERTIFICATION REQUIREMENTS.
If after the prescribed time limits, the individual has not satisfactorily completed all requirements for certification authority, the regional AF Division Manager or SMO/OCC Manager will consider the avenues of action listed below. The selected action will be carried out through existing procedures and authorities.
a. Reassignment. When an employee has failed to become certified, reassignment to a vacant position for which the individual can qualify shall be considered. It is not mandatory that the new assignment be at a location or be a type of work preferred by the employee.
b. Reduction-in-Grade. Reduction-in-grade may be considered for those employees who are unable to meet certification requirements and for whom no acceptable equivalent vacancy can be found. Any adverse action would be based upon the employee’s inability to perform the duties of the assigned position.
c. Separation. Employees in positions requiring certification authority may be subject to separation action if they are unable to qualify through the several methods allowed. This action would be based upon the employee’s inability to perform the duties of the position.
d. 52-59. RESERVED.
60. SELECTION OF EXAMINERS/PROCTORS.
3/05/2002 3400.3H
CHAPTER 6. EXAMINERS/PROCTORS AND EXAMINATION PROCEDURES
60. SELECTION OF EXAMINERS/PROCTORS.
Each regional AF Division/SMO/OCC Manager has the responsibility for selecting examiners/proctors who can demonstrate qualities of objectivity and fairness in conducting/proctoring an examination. Examiners/proctors will administer pertinent examinations in both testing phases of the certification process; i.e., systems theory-ofoperations and system performance.
a. Theory-of-Operations Proctor Requisites.
(1) The proctor shall be designated in writing.
(2) The proctor need not hold certification authority since the duties are monitoring only.
(3) The proctor shall be an FAA employee and may require a technical background.
b. System Performance Examiner Requisites.
(1) The performance examiner shall be designated in writing. This designation shall grant the examiner certification responsibility for the specific facility for the purpose of administering the examination and shall be documented on FAA Form 3400-15.
(2) The performance examiner must possess certification authority for the entire system on which the examination is given. In order to initially start the certification process for a particular system, subsystem, equipment or service, the performance examiner may be granted Temporary, Interim or Remote Interim certification authority as explained in paragraph 32.
(3) For the purposes of non-certifiable system examinations, the examiner must be proficient on the system as determined by the SMO/OCC Manager.
(4) The performance examiner shall be an FAA employee.
(5) The performance examiner shall not administer performance examinations to their supervisor.
(6) Performance examiners who are external to the local organizational entity are preferable.
(7) The performance examiner shall not be an individual who was administered the same performance examination by the examinee.
(8) The performance examiner shall not be the individual who provided OJT.
(9) The performance examiner shall sign all performance examinations.
(10) The performance examiner, or other technical specialist, shall make the appropriate certification statement entry in the facility log before the system, subsystem, equipment is returned to service.
3400.3H 3/05/2002
61. PROCEDURES GOVERNING ADMINISTRATION OF AN EXAMINATION.
61. PROCEDURES GOVERNING ADMINISTRATION OF AN EXAMINATION.
The following procedures shall apply to the administration of examinations given within this program:
a. Theory-of-Operations Examination. The proctor shall:
(1) Understand and apply mandatory secure handling requirements to protect the integrity of the program (paragraph 41b).
(2) Not discuss or disclose the contents of an examination with the examinee.
(3) Advise the examinee on the official nature of the documents and penalties involved for disclosure of their contents.
(4) Prepare an appropriate area for the administration of the examination, give the examinee any required instructions, materials, control and time the examination as prescribed, and process the completed examination as instructed.
(5) Store examinations in a secure place.
(6) Assure all scratch paper and notes are returned to the ECC with the examination.
(7) Allow the examinee access to only the reference material provided by the ECC if the examination is designated as closed book.
(8) Annotate the examination as to which questions are applicable for the system or configuration on which the test is intended.
(9) Assure that the proctor and examinee sign AC Form 3130-9, Envelope A, prior to returning the examination to the ECC.
(10) Ensure no other person is allowed in the immediate presence of the examinee(s) while the examination is in progress.
b. Performance Examinations.
(1) Distribution of performance examinations to individuals prior to actual administration is required and any approved deviations must also be provided in writing to the examinee. Individuals requiring certification authority shall be made thoroughly familiar with the examination requirements and related procedures during OJT.
(2) The examinee will complete the examination tasks unassisted, except in instances where two people are required to make a particular adjustment.
(3) The examiner shall be thoroughly familiar with the instructions and procedures pertaining to the performance examination.
(4) The examiner shall make specific comments regarding the examinee’s performance, procedures, failures, and other observations on the reverse side of FAA Form 3400-15.
(5) The examiner shall assure that the facility is operating normally at the conclusion of the examination or at any breaks in the examination and shall make appropriate log entries.
3/05/2002 3400.3H
Page 31 (and 32)
62. RETAKING EXAMINATIONS.
Examinations, either written or performance, shall not be readministered to individuals who have failed to pass a previous examination unless at least 30 calendar days have passed and measurable training progress has been made or a written waiver to the 30-day time limit has been granted by the regional AF Division/SMO/OCC Manager. All requests for retaking a theory-ofoperations examination prior to the 30-day time limit shall be submitted in writing to the ECC and accompanied with copies of the appropriate waivers. If an appropriate subdivision can be made, retakes may be limited to those subject areas of the examinations that the examinee has failed; e.g., the glideslope (GS) portion of an ILS examination or receiver portion of an airport surveillance radar (ASR) examination. Reexamination falls into two categories as indicated below.
62. RETAKING EXAMINATIONS.
a. Retakes of Theory-of-Operations Requirements. Regardless of the method only three total attempts shall be allowed to satisfy the theory-of-operations requirements. The third and final attempt requires a written waiver granted by the regional AF Division Manager. In the event of a failure by an individual requiring certification authority, a written performance improvement program shall be promptly prepared. The performance improvement program shall be documented in the official certification record file and shall list the following:
(1) Areas of knowledge deficiencies.
(2) Recommended study materials.
(3) Method for measuring progress.
(4) Establish a time schedule for completion of the improvement program.
(5) Identify instructor and method of documenting training.
b. Retakes of Performance Examinations. The supervisor shall determine, prepare, and document a performance improvement program for the individual who requires certification authority but has failed a performance examination. The performance improvement program shall be documented in the certification record file and approved by the responsible SMO/OCC Manager. The performance improvement program shall:
(1) List areas of deficiencies.
(2) Itemize OJT requirements.
(3) Establish a time schedule for completion.
(4) Identify instructor and method of documenting training.
63-69. RESERVED.
70. FILES.
3/05/2002 3400.3H
CHAPTER 7. FILES, FORMS, RECORDS, AND REPORTS
70. FILES.
An official "certification/training" record file (electronic or paper) shall be established and maintained in the SMO/OCC on each individual requiring certification authority. Field managers having personnel certification program responsibilities may maintain an informal certification/training file in accordance with the latest version of Order 1350.15.
a. Official Certification/Training Record File. Each official certification/training record file shall contain sufficient documentation to substantiate the technical specialist’s qualifications to possess certification authority and responsibility on a specific system, subsystem, equipment or service. The official certification/training record file shall contain the following:
(1) FAA Form 3400-3.
(2) Theory-of-operations examination results recorded on FAA Form 3400-3.
(3) OJT completion recorded on FAA Form 3400-3.
(4) Performance examination results recorded on FAA Form 3400-3.
(5) Original certification responsibility assignments on FAA Form 3400-5.
(6) Documentation of technical specialist’s proficiency reviews.
(7) Current certification authority requirements agreements on FAA Form 3400-6.
(8) Current training plan on FAA Form 3000-14.
(9) Active written performance improvement programs.
(10) Verification authorizations for non-Federal technicians.
(11) Cover sheets of successfully completed performance examinations on FAA Form 3400-15.
b. Reassignments. When an employee covered by the AF Maintenance Personnel Certification Program is reassigned to another SMO/OCC, the official certification/training record file shall be transferred by certified mail, return receipt requested, or by messenger to the employee’s new SMO/OCC within thirty days. In all other cases when a technical specialist leaves the region’s jurisdiction or is separated by the agency, the official certification/training record files will be forwarded to the regional AF division, via certified mail for disposition or retention in accordance with the latest version of Order 1350.15.
c. Retention. The official certification record case file shall be retained by the regional AF division in accordance with the latest version of Order 1350.15.
3400.3H 3/05/2002
71. FORMS DESCRIPTION AND USE.
The forms associated with the AF Maintenance Personnel Certification Program are described below. The original of all forms shall be included in the individual’s official certification and training record file. From the date of this order, all existing documentation will be retained as is. At the time of any new action, the procedures contained in this order are required for the documentation process. Forms listed below are available for downloading from the FAA Academy AF Training Bulletin Board.
71. FORMS DESCRIPTION AND USE.
a. FAA Form 3400-3. Refer to appendix 1, figure 2-1. This form or similar automated record shall be used to record the status of each individual in the certification program. It shall specify, in detail, an individual’s certification authority. The information on the form shall include, but is not limited to, the following:
(1) All certification authorities granted.
NOTE: Only system, subsystem, equipment, or services listed in Order 6000.15 shall be documented on the front side of this form.
(2) FAA Academy resident and distance learning courses, formal OJT, out-of-agency training, regional training, certification performance examinations whether passed or failed, with dates of completion.
(3) Signature and/or initials of responsible official.
(4) The beginning and ending dates in which experience was acquired when experience is used in lieu of a performance examination.
(5) Date certification authority on a specific system, subsystem, equipment, or service is revoked.
b. FAA Form 3400-5, Certification Responsibility. Refer to appendix 1, figure 3-1. This form is used for Federal employees only. This certification responsibility document or similar automated record is the means of officially assigning certification responsibility to FAA employees. FAA Form 3400-5 shall be signed by the employee, the immediate supervisor, and the SMO/OCC Manager. The original form shall be included in the individual’s official certification/verification record files and the superseded form annotated with a cancellation date corresponding to the effective date of the new FAA Form 3400-5.
NOTE: Only certifiable systems subsystem, equipment or services listed in the latest version of Order 6000.15 shall be included on this form.
c. FAA Form 3400-6, Certification Authority Requirements Agreements. Refer to appendix 1, figure 4-1. This form is to be used when an employee enters a new position requiring certification authority. This form may be used but is not required when an employee’s current position accrues a new certification authority requirement. FAA Form 3400-6, is not required for non-Federal employees.
d. FAA Form 3000-14, AF Training Plan. Refer to appendix 1, figure 5-1. The requirements for use of this form are described by the latest version of Order 3000.10, Airway Facilities Maintenance Technical Training Program.
74. AUTOMATION OF RECORDS.
3/05/2002 3400.3H
e. FAA Form 3400-15, Performance Examination Cover Sheet. Refer to appendix 1, figure 6-1. This form shall be used for documenting all performance examinations, designating the examiner, and assigning certification responsibility to the examiner.
72. REPORTS.
The AF Maintenance Personnel Certification Program includes record keeping and retention of information in sufficient detail to substantiate the requirements imposed herein. These reports (paper or electronic), regardless of media, shall be maintained in accordance with the latest version of Order 1350.15. Normally, this information will be contained in a database format. The information blocks contained in the FAA forms listed hereon may be computer generated in report format to meet the requirements of this order.
73. COMPUTER SECURITY, PRIVACY, AND FREEDOM OF INFORMATION ACT.
Certain legal and regulatory restrictions are placed on the collection, use, and dissemination of information. See the latest version of Order 1280.1, Protecting Privacy of Information About Individuals, and Order 1370.82, FAA Automated Information System Security Handbook. These requirements must be applied, when and where appropriate, to the provisions of this directive. Accreditation of the automation program and equipment shall be obtained from the regional Civil Aviation Security Division. See the latest version of Order 1370.82 for procedures.
74. AUTOMATION OF RECORDS.
Implementation of a national standard database for certification and training is desired to cross reference the certification requirements for the position to the training history of the technical specialist. Automation permits the generation of FAA Form 3400-3; FAA Form 3400-5; FAA Form 3400-6; FAA Form 3400-15. The database shall provide a cumulative (historical) record of the personnel certification/training for each technical specialist. FAA Form 3400-3 superseded by automation should be retained for historical purposes.
a. Authority. Regions, SMOs, and OCCs are authorized to automate personnel certification and training records.
b. Automated Forms. The computer-generated forms/reports shall contain, as a minimum, the information required on FAA Form 3000-14; FAA Form 3400-3; FAA Form 3400-5; FAA Form 3400-6; FAA Form 3400-15.
c. Database. Any database used to support automated certification authority and certification responsibility forms shall comply with the data field requirements as listed in appendix 2, figure 1.
(1) Standard acronyms for granting certification authorities can be found in the latest version of Order 6000.15.
(2) Databases shall be electronically backed up and the backup files should be secured in a fireproof environment or at another location. The retention of these files shall be in accordance with the latest version of Order 1350.15.
75-79. RESERVED.
3400.3H 3/05/2002
d. Signatures. Databases with electronic signatures will only be permitted if they meet the requirements of General Services Administration (GSA), National Archives and Records Administration (NARA), and legal. Paper copies of automated reports that do have electronic signature must have original signatures. A block will be provided on the form for the SMO/OCC Manager’s signature. This signature validates existing data.
75-79. RESERVED.
82.
3/05/2002 3400.3H
CHAPTER 8. VERIFICATION OF PERSONNEL MAINTAINING
NON-FEDERAL FACILITIES
80. GENERAL.
The information within this chapter is intended to clarify and provide additional information as applicable to the non-Federal technical verification program. Non-Federal public-use facilities that have been approved for instrument flight rules (IFR) and air traffic control (ATC) procedures in the NAS are required to meet Federal Communications Commission (FCC) licensing requirements. Non-Federal personnel maintaining these facilities or any transmitter or transmitting facility must possess an FCC General Radio Telephone Operator license in accordance with 47 Code of Federal Regulations (CFR) Part 87 (71 and 73). In addition, non- Federal personnel must meet the FCC license requirements for Federal Aviation Regulations (FAR) Part 171 facilities and applicable FAA orders, advisory circulars, and regulations. Technicians maintaining these facilities must show that they have the special knowledge and skills needed to maintain these facilities. It is the responsibility of the regional AF division to administer this program, but portions may be delegated to the SMO.
81. RESPONSIBILITY FOR NON-FEDERAL FACILITIES.
It is the responsibility of each regional AF Division Manager to:
a. Identify non-Federal facilities in their geographical area which are used, or will be used, in the NAS and have been approved for IFR and ATC procedures as outlined in FAR Part 171 and the latest version of Order 6700.20, Non-Federal Navigational Aids and Air Traffic Control Facilities.
b. Establish methods for the appropriate regional personnel to "verify" the capability of non- Federal personnel who are assigned maintenance responsibility for these facilities. This verification shall be accomplished through the administration of suitable examination procedures as delineated in this order.
82. PROCEDURES FOR VERIFICATION OF PERSONNEL MAINTAINING NON- FEDERAL FACILITIES.
Personnel responsible for the maintenance of non-Federal facilities described in paragraph 81 shall demonstrate that they have the special knowledge and skills required to adequately perform this task. All non-Federal technicians shall meet the minimum competency level with respect to theory-of-operations and performance requirements for the same or similar systems and equipment as FAA technical specialists. This includes minimum basic system theory-ofoperations, specific system theory-of-operations, and specific system performance examinations. This will be accomplished through satisfactory completion of an appropriate FAA Academy conducted course, an FAA-approved factory conducted training course, or satisfactory completion of theory-of-operations and performance examinations administered by FAA employees. The above procedure is the normal verification process for technicians maintaining non-Federal facilities and shall be adhered to except in cases where appropriate examinations are not available, in which case verification may be by interim verification methods (see paragraph 84).
84. INTERIM VERIFICATION PROCEDURES.
3400.3H 3/05/2002
a. Theory-of-Operations Equivalent. The non-Federal technician is required to satisfactorily complete basic theory-of-operations requirements by the methods indicated in paragraph 82 of this order. Non-Federal employers, or sponsors, shall determine which method listed in paragraph 82 they will utilize to develop or measure a technician’s level of competency for basic theory-of-operations.
(1) For a list of the basic theory-of-operations or the equivalencies, refer to appendix 3.
(2) For the purpose of FAA training and verification requirements, the possession of an FCC General Radio Telephone Operator license or an FCC General Radio Telephone Operator license with the additional (shipboard) Radar Endorsement will be considered equivalent to various FAA theory-of-operations examinations as indicated in appendix 3. Other out-of-agency training (OAT) equivalencies can also be found in appendix 3.
b. Performance Examinations. Performance examinations for non-Federal technicians shall be administered by FAA employees who possess certification authority on the appropriate type or similar type of facility. Appendix 5 contains a list of non-Federal facilities and the appropriate examinations for each type.
c. Prerequisite Training. Non-Federal employees may choose any method desired for completing all training up to, but not including, the basic theory-of-operations.
83. EFFECTIVE VERIFICATION DATE OF PERSONNEL MAINTAINING NON- FEDERAL FACILITIES.
Upon approval of a non-Federal system for use in the NAS, action will be taken to initiate development of appropriate examinations to validate the knowledge and skills of personnel having maintenance responsibility for the equipment. The "effective verification date" shall be 120-days from the date the examination is posted in appendix 5 for the particular system. After the "effective verification date," responsibility for the performance of a system shall be assigned only to those individuals possessing the authority granted under the provisions of paragraph 80. For systems incorporated into the NAS prior to March 12, 1973, the "effective verification date" is April 13, 1974.
a. Personnel maintaining equipment incorporated in the NAS, who have received verification authority in any form prior to December 12, 1994, and have maintained proficiency, shall not be required to take additional theory-of-operations examinations on the same system(s).
b. Non-Federal technicians assigned maintenance responsibility for presently approved systems or for new systems, as they are approved for incorporation into the NAS, shall meet the requirements of paragraph 82.
84. INTERIM VERIFICATION PROCEDURES.
Examinations may not be immediately available for non-Federal systems added to the NAS. Under these circumstances, interim verification authority may be granted upon satisfactory completion of the requirements found in paragraph 33b of this order, and a demonstration of ability to complete a locally developed performance examination comprised of the maintenance checks and tasks outlined in the equipment instruction book. A copy of the locally developed performance examination will be forwarded through the appropriate region to the Training Division for coordination with the national non-Federal program manager. If a national performance examination is not developed within 1 year after administering the locally
86. DEVELOPMENT OF VERIFICATION EXAMINATIONS.
3/05/2002 3400.3H
developed performance examination and the employee has performed required duties competently for at least a 12-month period and has satisfied theory-of-operations requirements, the interim verification authority shall be converted to a regular verification authority as indicated in paragraph 33.
85. VERIFICATION CREDENTIALS AND RECORDS.
Non-FAA technicians maintaining non-Federally owned facilities which are in the NAS infrastructure are required to hold verification authority.
a. Non-Federal Technicians Verification Authority. The regional AF Division/SMO Manager will be responsible for issuing non-Federal technicians verification authority on a specific system, subsystem, equipment or service and maintaining a record of the facilities maintained by each non-Federal technician. Non-Federal technicians are not assigned specific facility responsibility by the FAA. Therefore, paragraphs 36 and 37 of this order do not apply to non-Federal technicians.
b. Non-Federal Sponsor Responsibilities. The non-Federal facility sponsor is responsible for hiring, assigning maintenance responsibility and, with the help of the regional AF Division/SMO Manager, ensuring the technician meets the FCC licensing and FAA training requirements.
c. Verification Oversight. The individual technician, the employer, the sponsor, and the regional AF division non-Federal coordinator shall be provided a written notice of successful completion of verification requirements and issuance of verification authority. This written notice may take any form deemed appropriate by the responsible regional AF division. The regional AF division non-Federal coordinator shall maintain a record of all non-Federal facilities within their area of jurisdiction, the names of the sponsoring organizations, and the names of the technical personnel granted verification authority for each system. The office granting a verification authority shall maintain a copy of the technician’s FCC license, theory-of-operations certificates, performance exam cover sheets, all verification letters, reviews, revocations and any other supporting documentation. The same forms as indicated by the established guidelines for FAA technical specialists shall be used except where specified.
d. Verification Responsibility Across Regional/SMO Boundries. When a non-Federal employer or a sponsor desires to utilize a technician holding verification authority in another region/SMO, they will request a copy of the verification records from the issuing region/SMO. These records will be forwarded to the requesting region/SMO and validated. Verification authority may then be granted in accordance with paragraph 85c and based on records for the same type equipment/facilities within the requesting region/SMO’s jurisdiction. If there are discrepancies in the records that prevent granting verification authority, it will be the responsibility of the requesting region/SMO to contact the region that issued the verification authority for clarification. Attempts to resolve any discrepancies should be made at the lowest level before forwarding to a higher level. Final resolution will be made by the Training Division and coordinated with the national non-Federal program manager.
86. DEVELOPMENT OF VERIFICATION EXAMINATIONS.
When approval is granted for IFR and ATC procedures using new types of non-Federal facilities not already included in the NAS, the cognizant regional AF Division Manager shall notify the Training Division of the location, type, and the intended commissioning date for a new facility.
89. TRAINING FOR NON-FEDERAL PERSONNEL.
3400.3H 3/05/2002
The Training Division will initiate action to have suitable verification examinations developed as soon as possible.
87. GRADING.
Theory-of-operations examinations shall be graded exclusively by the ECC.
88. STORAGE.
Storage of written examinations shall be limited to the ECC. Under no circumstances shall theory-of-operations examinations be in the custody of non-Federal personnel. A supply of performance examinations may be maintained in each region and/or copied from the FAA Academy AF Training Bulletin Board.
89. TRAINING FOR NON-FEDERAL PERSONNEL.
The FAA Academy maintains an elaborate correspondence, resident, and CBI training program for FAA personnel. However, these courses and training manuals may be available to non- Federal personnel on a reimbursable cost basis. After non-Federal employers or sponsors receive a price quote, a written statement is required listing the number of copies of material requested, unit price, total cost, and a statement they are aware of the cost and agree to reimburse the FAA Academy for the full amount. If the course needed is an OAT course, the materials must be obtained from the contractor. Send or facsimile all non-Federal requests for training or materials to the OAT Training Coordinator, AMA-405. The mailing address is:
Federal Aviation Administration Mike Monroney Aeronautical Center, AMA-405
P.O. Box 25082 Oklahoma City, OK 73125
3/05/02 3400.3H Appendix 1
APPENDIX 1. LISTING OF FORMS
The following fonDS are available through nonDal channels or by electronically accessing the F AA Academy AF Training Bulletin Board.
Egrm Number Title NSN/Unit of Issue
FAA FOIlIl 3000-14 Airway Facilities Training Plan 0052-00-888-4000
Sheet
FAA Form 3400-3 0052-00-648-4004
Sheet
AF Personnel Certification/V erification
Authority and Related Training Record
FAA Fontl3400-5 Certification Responsibility 0052-00-842-8001
Sheet
F AA Fonn 3400-6 0052-00-843-0001
Sheet Certification Authority Requirements Agreement
FAA Fo11Il3400-15 0052-00-921-4000
Sheet Perfonnance Examination Cover Sheet
NOTE: All examples shown in Appendix 1 are examples intended to provide guidance to personnel involved in making these entries.
3/05/02 3400.3H
Appendix 1
APPENDIX I. LISTING OF FORMS (CONTINUED)
FIGURE I. Instructions for Preparing F AA Fonn 3400-3, AF Personnel Certification/V erification Authority and Related
Training Record (Annual Review).
I. Technical specialist's name (last, first, and middle initial).
The grade level
2. Technical specialist's social security number.
3. Technical specialist's occupational series; i.e., FG-856, FG-2101, non-Federal, etc. shall not be used.
4. Leave blank.
5. Leave blank.
6. Leave blank
7. Leave blank
8. Leave blank
9. Leave blank
10. Leave blank.
11. Leave blank.
12. Leave blank.
13. Leave blank,
14. Leave blank.
15. The technical specialist's current duty status; i.e., ABC SSC, (for non-Federal technicians, use SMO identification code), date of the action, description of the action (annual review for proficiency), written signature ofSMOIOCC manager, and routing symbol of the SMOIOCC manager.
16. Leave blank
3105102 3400.3H Appendix 1
APPENDIX I. LISTING OF FORMS (CONTINUED)
FIGURE 1-1. SAMPLE FAA FORM 3400-3 ANNUAL REVIEW
PAGE NO AF PERSONNEL D CERTIFICA TION O VERlFICA TION AUTHORITY AND RELA TED TRAINING RECORD
2 SOCIAL SECURJTY NUMBER
123-45-6789
3. SERIES
FG-2l0l
I EMPLOYEE'S NAME
Doe Jacqueline A.
4 SYSTEM I SUBSYSTEM I
EQUIPMENT ...SERVICE .11
5. nfEORY-OF-OpERAnONS
QUAllFICATION ~
6 DATEQUALIFIED
7. INITIALS
8. on DATE QUALIFJFD
9. INmALS
10. PERFORMANCE QUALIFYING
MErnOD,l(
II DATEQUAUFIED
12 .INI11ALS
--
13. DATE AurnORITY ACQUIRED
14 DATE AlJffiORITY REVOKED
15. CHANGE OF STATION, ANNUAL REVIEW AND VALmAnON RECORD
EMPLOYEE DATE
OF ACTION
REMARKS AF OFFICIAL
DUTY STATION SIGNATURE RTG.SYM. !/
ABC SSC 02/02/94 Annual Review MGR. ABC SMO
ABC SSC 01/18/95 Annual Review Act. MGR. ABC SMO
ABC SSC 02/12/96 Annual Review MGR. ABC SMO
ABC SSC 02/12197 MGR. ABC SMO Annual Review
ABC SSC 02/12/98 Annual Review Act. MGR. ABC SMO
Annual Review I ~ ~ ABC SSC 02/12/99 MGR. ABCSMO
.~ ABC SSC 01/15/00 Annual Review MGR. ABC SMO
xocc 12/14/00 Annual Review MGR. XQCC FAA Fonn 3400-3 (U-01) Supersedes Previous Editions NSN 0052-00-648-4004 I
3/05/02 3400.3H Appendix 1
APPENDIX I. LISTING OF FORMS (CONTINUED)
16. RECORD OF RELA TED TRAINING AND EXAMINA TION RESULTS
SYSTEM I CPMIS oc TRAINING OR EXAMINATION REMARKS INITIALS
SUBSYSTEM! EQUIPMENT <W
SERVICE
COURSE NUMBER
TYPE
?!
EXAM NUMBER
RESULTS
§!
DATE COMPLETED
Notes: Instructions for completing this fonn are in Order 3400.3.
!1 If other than regular certification, enter (I) for Interim or (1) for Temporary, (R) for Remote, and (I/R) for Interim Remote. 1! Course Number, CPMIS Number or "INF" for Infornlal Training ;!1 Performance Exam No. or PEXAM for Perfornlance Examination, EXP for Experience, PC for Prior Certification, NIA for Not Applicable .1.1 Denote type of action in the "Remarks" column. ~ Enter "C" if pertaining to Conceptsffheory-of-operations, "P" if pertaining to Perfonnance, or '-0" if pertaining to OJT. !1 Enter "P" for Passed or "F" Failed.
3/05/02 3400.3H Appendix 1
APPENDIX 1. LISTING OF FORMS (CONTINUED)
FIGURE 2. Instructions for Preparing FAA Fonn 3400-3.
AF Personnel Certification/Verification Authority and Related Training Record (Certification Authority).
NOTE: When this fonn is used for "Verification" ofnon-Federal technicians, the verification box shall contain a check mark and blocks 8 and 9 shall be left blank.
Technical specialist's name (last, first, and middle initial)
2. Technical specialist's social security number
The grade 3. Technical specialist's occupational series; i.e., FG-856, FG-2101, non-Federal, etc. level shall not be used.
4. Enter the standard facility type acronyms for the specific system or subsystem as found in Order 6000.15 and the appropriate five-digit Facility Identification Code as listed in Order
1375.4. For service certification, enter only the appropriate acronym found in Order 6000.15. Temporary or interim certification shall be indicated by the appropriate letter "T", "r', "R", or "I/R " and enclosed in parentheses.
5. Course number/CPMIS Number by which theory-of-operations requirements are met. Enter "INF" only for granting interim certification based on informal training.
6. Date technical specialist successfully completed theory requirements.
7. Handwritten initials of the SMOIOCC manager or designated responsible official. These initials may be typed or printed only if original records are being updated.
8. Date technical specialist successfully completed OJT requirements.
Continue reading ↓ 120 of 235 passages shown