Order 3000.10B AF Technical Training Program
This document is cancelled. Cancelled by 3000.57. Check the official source before relying on it.
Text read by OCR from a scanned file (3 of 113 pages). Check the original, as some words may be misread.
ORDER 3000.10B
ORDER 3000.10B
AIRWAY FACILITIES TECHNICAL TRAINING PROGRAM
U.S. DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION
Distribution: A-W(except AF)-2; A-W(AF)-3; A-X(AF/HR)-3 Initiated By: AFZ-100 A-YZ(MUMA/HR)-3; A-Z); A-FAF-O(MAX)
FOREWORD
This order prescribes the procedures and assigns responsibility for the administration of the Airway Facilities Technical Training Program. General guidance is provided for the management, planning, conduct and evaluation ofthe technical training program. This order ensures that technical personnel responsible for the establishment, installation, maintenance, second level support, and certification of facilities used in the National Airspace System (NAS) are proficient in perfonning assigned duties.
U.S. DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION
Related directives provide detailed guidance in the specialized areas ofadministrative management and the Airway Facilities Maintenance Personnel Certification Program.
Regions may supplement this order with more specific guidelines and instructions to accommodate unique regional conditions.
Original Signed by: Steve Zaidman Director ofAirway Facilities
Page i (and ii)
This page left intentionally blank.
TABLE OF CONTENTS
TABLE OF CONTENTS
CHAPTER1. GENERA~
100. Purpose … 1 101 . Distribution … 1 102. Cancellation … 1 103. Background … 1 104. Explanation of Changes … 2 105. Definitions … 3 106. Training Philosophy … 4 107-199. Reserved … 5
CHAPTER 2. ROLES AND RESPONSIBILITIES
200. General … 7 201. FAA Headquarters National AF Training Division … : … 7 202. FAA Academy AF Division … 7 203. Regional Airway Facilities Division … 8 204. Airway Facilities Field Organizations (SMO/Branch/ANIIAOP/AOS/OCC) … 9 205. First Level Supervisors/Managers … 10 206. Employees … 11 207- 299. Reserved … 11
CHAPTER 3. TRAINING ADMINISTRATION
CHAPTER 3. TRAINING ADMINISTRATION
SECTION 1. ADMINISTRATIVE REQUIREMENTS
300. General … : … 13 301. Announcement ofTraining Opportunities … 13 302. Eligibility to Attend Training … 13 303. Training Needs Assessment … 13 304. Training Approval … 14 305. Training Selection … : … 14 306. Pre/Post-Training Counseling … 14 307. Agreement to Continue in Service of Agency … 15 308- 309. Reserved … 15
SECTION 1. ADMINISTRATIVE REQUIREMENTS
SECTION 2. POLICIES AND GUIDELINES WHEN ATTENDING TRAINING 31 0. General … 1 7 311 . Conduct … 17 312. Leave … 18 313. Departure Before Course Completion … : … 18 314. NoncontigUous Assignments … : … 18 315. Resolution ofPersonal Problems … 18 316. Use of Official Duty Time for Training … 19 317. Training Environment … 19 318. Examinations … 19 319. Unsatisfactory Completion ofAssigned Training … : … 19 320. Remedial Training Plan … : … 20 321 - 329. Reserved … 20
Page iii
TABLE OF CONTENTS (Continued)
SECTION 3. ENRQLLMENT/COMPLETION PROCEDURES AND REQUIREMENTS 330. General … :~~ … 21 331. Resident Training … 21 · 332. Distance Learning … 21 333. Out-of-Agency Training. ~ … 21 334. Locally Arranged and/or Conducted Training … 22 335. On-the-Job Training … 22 336. Minimum Attendance Requirements … 22 337. Training Completion … 22 338. Training Certificates … 22 339. Training Histories … 22
SECTION 4. TRAINING INFORMATION RESOURCES 340. General … 23 341. FAA Information Superhighway for Training (FIST) … 23 342. Centralized Personnel Management Information System (CPMIS) … 23 343. Other Resources … , … 23 344 - 349. Reserved … 23
SECTION 5. OTHER INFORMATION 350. General … 25 351. Alternative Training Resources … 25 352. Degree Programs and Nondegree Courses … 25 353. Funding … 25 354. Instructor Qualifications … 26 355- 359. Reserved … : … 27
SECTION 6. TRAINING RECORDS 360. General … 29 361 . Assignment to Training … 29 362. Notification … , … 29 363. Training Certificates … 29 364. Responsibilities … · … 30 365. Procedures … 30 366. Forms and Examples … 30 367-399. Reserved … ' … 30
CHAPTER 4. TRAINING REQUIREMENTS AND QUOTA MANAGEMENT
CHAPTER 4. TRAINING REQUIREMENTS AND QUOTA MANAGEMENT
400. General … 31 401. Airway Facilities Annual Call for Training (CALL) … : … 31 402. National Programming Conferences … 32 403. Training Categories … , … 32 404. Training Delivery Methods … 33 405. Procurement ofTraining … 33 406. Emergency Quota Requirements … 33 407. Review and Oversight … 33
Page iv
TABLE OF CONTENTS (Continued)
408. Training Reserv~············ … 34 409. CPMIS Quota Enrollments … 34 410. Non-Utilized Quota … 34 411. Quota Pop-Ups … 34 412. No- Shows … 34 413 - 499. Reserved … 34
CHAPTER 5. TRAINING PLAN AND PROGRESSION
CHAPTER 5. TRAINING PLAN AND PROGRESSION
500. General … 35 501. Training Plan … 35 502. Training Progression … 35 503-599. Reserved … 36
CHAPTER 6. PREREQUISITES, EQUIVALENCIES AND WAIVERS
600. General … 3 7 601. Prerequisite Identification … 37 602. Equivalencies … 37 603. Operational Necessity Waivers … 37 604-699. Reserved … 38
CHAPTER 7. ON-THE-JOB TRAINING
CHAPTER 7. ON-THE-JOB TRAINING
700. General … 39 701. Definition … 39 702. Responsibilities … 39 703. OJT Process … 40 704. OJT Failures … 41 705. Locally Developed OJT Courses … 41 706. Documentation … 42 707 - 799. Reserved … 42
CHAPTER 8. AF TECHNICAL SYSTEMATIC TRAINING DEVELOPMENT PROCESS
CHAPTER 8. AF TECHNICAL SYSTEMATIC TRAINING DEVELOPMENT PROCESS
800. General … 43 801. Responsibilities … 43 802. Guidelines for Training Development and Implementation … 45 803. Training Methods … 50 804- 899. Reserved … 51
CHAPTER 9. OUT-OF-AGENCY TRAINING
900. General … 53 901. Scope … 53 902. Approving Authority … 53 903. When Out-of-Agency Training May be Used … 54 904 - 999. Reserved … 54
CHAPTER 9. OUT-OF-AGENCY TRAINING
Pagev
TABLE OF CONTENTS (Continued)
APPENDIX 1. LISTING:ef FORMS
LISTING OF FORMS … 1
FAA Form 3000-20, Airway Facilities Group Training Needs Assessment Form
FIGURE 1. Instructions for Preparing FAA Form 3000-20, Airway Facilties Group Training Needs Asessment Fmm … 2 FIGURE 1-1. FAA Form 3000-20, Airway Facilities Group Training Needs Assessment
LISTING OF FORMS … 1
Form … , … 3 FIGURE 1-2. Sample FAA F01m 3000-20, Airway Facilities Group Training Needs Assessment Form … 5
FAA Form 3000-22, Airway Facilities Individual Training Needs Assessment Form
FIGURE2. Instructions for Preparing FAA 3000-22, Airway Facilities Individual Training Needs Assessment Form … 7 FIGURE2-l. FAA Fo1m 3000-22, Airway Facilities Individual Training Needs
Assessment F onn … 8 FIGURE2-2. Sample FAA Form 3000-22, Airway Facilities Individual Training Needs Assessment Form … 10
FAA Form 3000-25, Pre-Training Counseling Form
FIGURE3. Instructions for Preparing FAA Form 3000-25, Pre-Training Counseling Form … 11 FIGURE 3-1. FAA Form 3000-25, Pre-Training Counseling Fo1m … , … 12 FIGURE3-2. Sample FAA Fo1m 3000-25, Pre-Training Counseling Form … 13
FAA Form 3000-26, PQst-Training Counseling Form
FIGURE4. Instructions for Preparing FAA Form 3000-26, Post-Training Counseling Form … 14 FIGURE4-1. FAA Form 3000-26, Post-Training Counseling Form … 15
FIGURE4-2. Sample FAA Form 3000-26, Post-Training Counseling Form … 16
FAA Form 3000-27, General Use Certificate of Training
FIGURES. Instructions for Preparing FAA Form 3000-27, General Use Training
Certificate … 1 7 FIGURE 5-l. FAA Form 3000-27, General Use Training Certificate … 18 FIGURE 5-2. Sample FAA Form 3000-27, General Use Training Certificate … 19
Page vi
APPENDIX 1. LISTING OF FORMS (Continued)
APPENDIX 1. LISTING OF FORMS (Continued)
FAA Form 3000-19, On-the-Job Training Progress Form
FIGURE 6. Instructions for Preparing FAA Form 3000-19, On-the-Job Training Progress Form … 20 FIGURE 6-1. FAA Form 3000-19, On-the-Job Training Progress Form … 22 FIGURE 6-2. Sample FAA Form 3000-19, On-the-Job Training Progress Form … 23
AC Form 3145-2, Correspondence Study Enrollment Application
FIGURE 7. Instructions for Preparing AC Fonn 3145-2, Correspondence Study
Enrollment Application … 24 FIGURE 7-1. AC Form 3145-2, Correspondence Study Enrollment Application … 26 FIGURE 7-2. Sample AC Form 3145-2, Correspondence Study Enrollment Application … 27
FAA Academy Curriculum Modernization System Training Initiative Request Form
FIGURE 8. Instructions for Preparing FAA Academy Curriculum Modernization System Training Initiative Request (TIR) Form … 28 FIGURE 8-1. FAA Academy Curriculum Modernization System Training Initiative Request (TIR) Form … 29 FIGURE 8-2. Sample FAA Academy Curriculum Modernization System Training Initiative Request (TIR) Form … 31
FAA Form 3000-21, Opertional Necessity Waiver Request
FIGURE 9. Instructions for Preparing FAA Form 3000-21, Operational Necessity Waiver … 34 FIGURE9-1. FAA Form 3000-21, Opertional Necessity Waiver … 35 FIGURE9-2. Sample FAA Form 3000-21, Operational Necessity Waiver … 36
FAA Form 3000-14, Airway Facilities Training Plan
FIGURE 10. Instructions for Preparing FAA Form 3000-14, Airway Facilities Training Plan … 37 FIGURE 10-1. FAA Form 3000-14, Airway Facilities Training Plan … 38 FIGURE 10-2. Sample FAA Form 3000-14, Airway Facilities Training Plan … 39
FAA Form 3000-23, Equivalency Request
FIGURE 11. Instructions for Preparing FAA Form 3000-23, Equivalency Request … 40 FIGURE 11-1. FAA Form 3000-23, Equivalency Request … 41 FIGURE 11-2. Sample FAA Form 3000-23, Equivalency Request … 42
FAA Form 3000-24, Emergency Quota Request
FIGURE 12. Instructions for Preparing FAA Form 3000-24, Emergency Quota Request ... 43 FIGURE 12-1. FAA Form 3000-24, Emergency Quota Request … 45 FIGURE 12-2. Sample FAA Form 3000-24, Emergency Quota Request … 46
Page vii
APPENDIX 2. ACRONYMS
APPENDIX 2. ACRONYMS
APPENDIX 2. ACRON¥MS … 48
Page viii
CHAPTERl. GENERAL
100. PURPOSE.
This order specifies the procedures and policies necessary to implement and sustain a uniform teclmical training program that directly supports the Airway Facilities Maintenance Personnel
Certification Program. Agency sponsored training assigned to the teclmical specialist shall be restricted to the development of specialized skills, knowledge, and abilities necessary for the perfonnance oftheir official duties. The guidance provided herein is in accordance with Order 3000.22, Air Traffic Services Training.
CHAPTERl. GENERAL
101. DISTRIBUTION.
This order is distributed to division level in Washington headquarters; to branch level at the FAA Logistics Center and the FAA Academy; to division level within the FAA Technical Center; to branch Level in the regional Airway Facilities divisions, with maximum distribution.
102. CANCELLATION.
Order 3000.1 OA, Airway Facilities Maintenance Technical Training Program dated May 8, 1985, is canceled. National AF Training Division memorandums applicable to the AF teclmical training program, dated prior to this order, are also canceled.
103. BACKGROUND.
The mission ofthe Airway Facilities (AF) Division is to ensure the safe and efficient operation, maintenance and use ofthe air transportation system today and meet tomorrow's challenges to increase system safety, capacity and productivity. In 1997, Order 3000.68, Training, was
canceled and replaced by FAPM-410. FAA Order 3000.6B had provided overall guidance and direction ofthe AF training program. F APM-41 0 was subsequently canceled in calendar year 2000 and replaced by HRPM Volume 5, Learning and Development. The revision and development effort for Order 3000.108 utilized information that was contained in both ofthe previously mentioned documents. The order was also updated to meet today's current requirements and standards. The AF teclmical training program:
a. Establishes a minimum standard ofteclmical proficiency to ensure that the system, subsystem, equipment or service provides the advertised service to the user, while enhancing operational safety within the National Airspace System (NAS).
b. Develops and increases the technical specialist's skill level to restore failed facilities in a timely manner, thereby increasing availability and efficiency of the NAS.
c. Provides the teclmical specialist with valuable experience to enhance the FAA's periodic maintenance program and to take the necessary actions to preclude failure and increase system reliability.
d. Supports increased air traffic activity and user demands by training the technical work force to meet the challenges ofthe new technological advancements being deployed within the NAS infrastructure.
104. EXPLANATION OF CHANGES.
This order has been updated to provide guidance and policy to the technical training program. This revision:
a. Defines and assigns organizational responsibilities for the on-the-job training (OJT) process.
b. Necessitates a remedial plan for any training failure.
c. Requires issuance of a training certificate and associated entry into the employee's Consolidated Personnel Management Infmmation System (CPMIS) (either graded or Pass/Fail) history. ·
d. Establishes minimum attendance and course completion critelia in order to be awarded credit for a training course.
e. Applies to all organizations within Airway Facilities Division, such as, NAS Implementation Program (ANI), NAS Operations (AOP), Operational Support (AOS), Regional Divisions and associated Branches, System Management Offices (SMO) and Operational Control Centers (OCC).
f. Establishes an emergency quota process and the use ofan associated Emergency Quota request form.
g. Revises the AF Training Plan form (FAA Form 3000-14).
h. Establishes a national form for the Needs Assessment (Individual and Group) documentation process.
i. Aligns Order with Order 3400.3X, AF Personnel Certification Program, and supports the technical training and certification programs.
j. Identifies that an Agreement to Continue-in-Service may be required.
k. Aligns order to meet AF's current organizational structure and to comply with all applicable Public Laws.
I. Adds endorsement for service and/or reimbursement agreement.
m. Establishes national processes and forms for Operational Necessity Waiver and Equivalency requests.
n. Establishes the training development process.
o. Incorporates student conduct procedures.
p. Adds a new requirement for quarterly re-programming conferences.
q. Revises the automatic re-take and re-examination policy and procedures.
105. DEFINITIONS.
Definitions ofsome ofthe terms used in the teclmical training and personnel certification programs may also be round in Orders 6000.15X and 3400.3X. For the purpose ofthis order, · the following definitions are used:
a. AF Training Program Management Office (AF TPMO). Provides overall management and oversight ofthe technical training program for AF field organizations.
b. AF Technical Specialist. A generic title that includes but is not limited to, electronic technicians, airway transportation systems specialists (ATSS), engineering teclmicians, maintenance mechanics, and engineers.
c. Distance Learning (DL). Distance Learning includes, but is not limited to correspondence study, computer based instruction (CBI), Aviation Training Network (ATN) and web-based training.
d. Division Manager. Position title applicable to AF regional or headquarters management, ANI Implementation Center (IC) management, et al, who assign training program responsibilities.
e. Equivalency. Equivalencies are based upon successful completion of a nationally approved examination or by the student's prior training, usually completed outside the FAA. The FAA Academy, AF Division, is the approving authority for equivalencies.
f. Field Conducted Training. Training conducted in the field by FAA Academy Instructors or field personnel, which has been nationally approved. Generally, OJT that is performed on non-certifiable systems, subsystems, equipment or services is considered field
conducted training.
g. Field Organizations. For the purposes ofthis order, field organization refers to the AF Systems Management Office (SMO) and corresponding-level offices for the ANI, AOP, AOS and OCC organizations.
h. First-Level Supervisor/Manager. An employee whose primary responsibility is the technical direction and/or supervision ofpersonnel perfonning maintenance and/or certification ofNAS facilities.
i. Fixed-Schedule Training. This type oftraining has a schedule established by the training provider. The training provider is responsible for managing the student's progression through the course material.
j. Locally Arranged and/or Conducted Training (LACT). Training which is necessary for a specific and localized need. This training may be supplemental, site specific or urgently needed training courses.
k. On-the-Job Training (OJT). OJT is a bridge from the theory-of-operations training to the development or acquisition ofskills and knowledge required on certifiable systems, subsystems, equipment or services. It is a planned activity conducted to provide direct experience in the work environment where the employee is performing, or will perform assigned duties.
I. OJT Instructor. A specialist designated to provide on-site training to other teclmical specialists. Instructors who administer OJT must meet the critelia defined in Chapter 7, Onthe-Job Training, ofth~~rder.
m. Out-of-Agency Training. Training conducted by an entity other than the FAA, whether or not a fee or tuition is charged.
n. Performance Examination. An examination designed to test the technical specialist's proficiency in measuting, evaluating, testing, and detennining the accuracy and suitability ofa particular type ofsystem, subsystem, equipment or service.
o. Prerequisite Training. Training in a progressive sequence ofcourses that must be successfully completed prior to attendance in subsequent course(s).
p. Program Review. An evaluation ofthe effectiveness ofthe teclmical training program.
q. Refresher Training. Approved retakes offormal courses, OJT or performance examinations that have been successfully completed. This training may be·necessary to maintain, re-acquire, or demonstrate proficiency.
r. Resident Training. An approved national training course that is conducted by FAA Academy instructors and administered at the FAA Academy.
s. Self-Paced Training. This type oftraining has a flexible schedule, and the student and first-level supervisor manage the progression through the course material.
t. Theory-of-Operations Examination. An examination to verify that a technical specialist possesses the necessary knowledge ofprinciples and theory-of-operations for a system, subsystem, equipment or service. Successful completion ofthis examination demonstrates a knowledge level equivalent to that ofa graduate ofan appropriate formal training course.
u. Training Instructor. A training instructor can be any ofthe following: FAA or · contract instructor, site administrator or any other person administeling the training.
v. Training Provider. Organization, agency or person that is responsible for the direct oversight and management of a: technical training course. Examples include: The FAA Academy, site administrators, proctors, out-of-agency contractors and· locally arranged and/or
conducted training administrators.
w. Training Specialist. Responsible for implementation and administration ofthe technical training program at the field organization level.
x. Waiver. A waiver is the temporary defennent of a prerequisite requirement, which allows the technical specialist to attend one specific course or class.
106. TRAINING PHILOSOPHY.
The AF teclmical training program shall be conducted in a maffi.Ler that allows the technical
specialist to develop the necessary knowledge and skills to the depth and scope commensurate with the AF maintenance philosophy defined in the current version ofFAA Order 6000.30, NAS Maintenance Policy. The training shall make use ofthe valious modes ofinstruction,
such as: resident training, field conducted, distance learning and on-the-job training. The
Page4
3000.IOB
training methodology shall be chosen to assure the most effective and efficient training possible, while promoting development ofmaximum proficiency. All training curriculum shall meet or exceed the app£0-priate occupational safety and enviromnental compliance regulations,
107- 199. RESERVED.
This page left intentionally blank.
CHAPTER 2. ROLES AND RESPONSIBILITIES
200. GENERAL.
This chapter defines the roles and responsibilities for organizations within the AF Technical Training Program.
201. FAA HEADQUARTERS NATIONAL AF TRAINING DIVISION.
The National AF Training Division is responsible for the following:
CHAPTER 2. ROLES AND RESPONSIBILITIES
a. Approves all AF technical and occupational safety and environmental compliance training requirements.
b. Establishes training requirements as described in the annual Call for Training.
c. Establishes and provides a listing ofnew equipment requirements.
d. Initiates and manages the annual Call for Training process.
e. Reviews national training plans and proposals submitted for new training requirements.
f. Validates training requirements.
g. Provides oversight for quota management.
h. Allocates all training quota.
i. Resolves identified training concerns.
j. Serves as coordinator for national technical training work groups.
k. Provides guidance and direction for AF Collegiate Training Initiative {CTI).
1. Responsible for implementing AF's strategic goals for training.
m. Approves technical training course prerequisites.
n. Ensures training is available to complement and support the AF Personnel Certification Program.
o. Provides overall teclmical training program policy and guidance to all AF organizations.
p. Develops guidance for the planning, analysis, design, development, content, delivery, and evaluation ofAF technical training.
q. Establishes standards for the evaluation ofAF technical training programs. Initiates, directs, and ensures accomplishment oftechnical training program evaluations.
r. Identifies, allocates, and manages the AF technical training budget.
s. Reviews, updates and validates AF Personnel Certification Examinations.
t. Identify core skills training requirements during new system acquisition and incorporate these into the Training Progression documentation as necessary.
202. FAA ACADEMY AF DIVISION.
The FAA Academy AF Division is responsible for the following:
a. Implements the'Zievelopment, delivery and administration oftechnical training.
b. Administers the training requirements process:
(1) Detennines training resource availability in response to the annual Call for Training.
(2) Inputs final training quota and class schedules into CPMIS.
(3) Updates and maintains the AF course catalog.
c. Administers the AF Out-of-Agency training program.
d. Recommends prerequisites for new courses and changes in established course prerequisites.
e. Approves/disapproves requests for equivalencies ofAcademy courses.
f. Provides training matedals for all phases ofthe technical training program.
g. Prepares and issues announcements relating to technical training courses.
h. Manages AF's Distance Learning infrastructure.
i. With respect to the evaluation ofAF technical training courses, the FAA Academy shall:
(1) Develop the necessary course critiques, questionnaires, other evaluation materials and procedures necessary to implement the evaluation process.
(2) Sm).1marize the data collected and submit reports, as required, to the National AF Training Division.
(3) Make recommendations to National AF Training Division for corrective action based upon evaluation findings.
j. Provides technical evaluation support for the AF-CTI Program.
203. REGIONAL AIRWAY FACILITIES DIVISION.
AF Regional Divisions are responsible for the conduct, administration, overall guidance, direction and management ofthe regional technical training program. Each AF Regional Division has the following responsibilities with respect to administering the AF National Technical Training Program ~ithin their organization:
a. Develops and recommends policies, standards and procedures necessary to effectively implement technical training programs within the division.
b. Oversight role in the development ofcourse content and material for technical training courses to meet needs specific to special conditions within the division's program area .
. c. Validates technical training requirements for submission to the National AF Training Division.
d. Participates in regional and national training programs including programming conferences and workgroups.
e. Ensures that tral.ning records are maintained, and reports and forms are prepared and then submitted in accordance with national and regional policies and procedures.
f. Ensures that local training courses and programs are conducted in accordance with national and regional policies and procedures.
· g. Reviews and recommends requests for operational necessity waivers of prerequisites for Academy courses.
h. Coordinates and distributes technical training quota to their field organizations and branches and ensures timely quota enrollment.
i. Develops and administers the training budget.
j. Plans and develops funding requirements for locally arranged training and/or conducted training (LACT).
k. Assists field organizations in developing standards, procedures and guidance for the development and delivery ofAF technical training.
I. Ensures that all regional technical training complies with the following: FAA and OPM directives, statutory and regulatory requirements, and operational and procedural methods.
m. Obtains technical training to meet regional training needs when training is not available through the FAA. ·
n. Conducts training evaluations ofregional technical training programs in accordance with National AF Training Division guidance and/or locally developed training evaluation plans.
o. Provides guidance and advice to organizations in support oftheir training activities, including training policy, procedures, resources, methodology and delivery.
p. Reviews and forwards requests for equivalencies to the appropriate AF Academy Branch Manager.
q. Ensures data is entered into CPMIS for local laboratories, LACT, OJT and performance examination completions.
r. Acts as the regional point ofcontact for the accountability of no shows.
s. Monitor the accomplishment oftraining plans.
204. AIRWAY FACILITIES FIELD ORGANIZATIONS (SMO/BRANCH/ANI/AOP/AOS/OCC)
204. AIRWAY FACILITIES FIELD ORGANIZATIONS (SMO/BRANCH/ANI/AOP/AOS/OCC)
Field organizations are responsible for the conduct, administration, overall guidance, direction and management ofthe technical training program. Field organizations have the following responsibilities for administering the AF National Technical Training Program within their organizations:
a. Oversees the technical training program.
b. Develops, approves and implements action to be taken on potential or actual training failures.
c. Establishes an ert\tironment that reinforces technical training.
d. Assesses the effectiveness oftechnical training in achieving the desired results.
e. Develops training requirements and provides justification as required.
f. Develops and administers the training budget.
g. Develops and/or procures local training when such training is not othe1wise available.
h. Coordinates and establishes training schedules.
i. Administers theory-of-operations examinations and correspondence study supervised final examinations.
j. Maintains accurate training records.
k. Ensures that the training specialist and personnel used to perform instructional duties have the required instructor qualifications.
I. Ensures all prerequisite training, enrollment and employee notifications are completed in a timely mam1er.
m. Ensures employees receive pre- and post-training counseling.
n. Conducts an annual training program review.
o. Administers the teclmical training program in accordance with all-applicable orders and policies.
p. Maintains all orders, implements necessary procedural changes and supplements guidance as required to fit organizational structure.
q. Coordinates and submits training requirements in accordance with the Call for Training guidance.
r. Ensures that the employees and supervisors are aware ofall prerequisite requirements and that such requirements are met prior to attending training.
s. Monitor the completion oftraining plans.
205. FIRST LEVEL SUPERVISORS/MANAGERS.
AF supervisors/managers have the following responsibilities with respect to the AF National Technical Training Program:
a. Determine technical training requirements necessary to maintain NAS operations and employee development.
b. Determine technical training needs by identifying the knowledge and skills required by their employees on the job.
c. Develop and update a written training plan for each employee requiring t.raining.
d. Coordinate and establish employees' training schedules.
e. Ensure timely completion of employees' prerequisite training and emollment for planned technical training.
f. Counsel employees both prior to and after training, regarding agency policy, course objectives, desired course outcomes, employee attitudes, training results and the relationship of the training to the position.
g. Revise and update training plan after completion oftraining.
h. Assign and coordinate on-the-job training as required.
206. EMPLOYEES.
AF employees have the following responsibilities within the AF National Technical Training Program:
a. Apply themselves to the learning task in a professional manner and successfully complete training objectives within prescribed times.
b. Assist the supervisor/manager in identifying individual training needs relative to cmTent job requirements in order to maintain technical proficiency on assigned equipment.
c. Complete the development ofa technical training plan collaboratively with the assigned supervisor/manager.
d. Participate in self-development activities.
e. Participate in pre- and post-training counseling sessions.
f. Complete and submit all required course critiques and questionnaires, and provide feedback to their supervisor/manager.
g. Provide training to other employees as assigned by their supervisor/manager (in accordance with paragraph 354, Instructor Qualifications).
207-299. RESERVED.
This page left intentionally blank.
CHAPTER 3. TRAINING ADMINISTRATION
CHAPTER 3. TRAINING ADMINISTRATION
SEG'f-ION 1. ADMINISTRATIVE REQUIREMENTS
300. GENERAL.
This section contains procedures and requirements regarding: employee eligibility to attend
training, needs assessment requirements, training selection, continue in service agreements, approval process and student conduct while in training status. Training specialists shall implement these procedures at their organizational level to ensure efficient and orderly management ofthe technical training program.
SEG'f-ION 1. ADMINISTRATIVE REQUIREMENTS
301. ANNOUNCEMENT OF TRAINING OPPORTUNITIES.
AF training offices are responsible for announcing available technical training. They shall provide the selection and assignment procedures required for the training activity.
302. ELIGIBILITY TO ATTEND TRAINING.
a. Training Opportunities for FAA Personnel. All full-time, part-time, temporary and intermittent FAA employees (including summer hires and interns) are eligible for learning and development opportunities.
b. Training Opportunities for Non-Government Personnel. All ofthe following conditions shall be met in order for non-Government personnel to participate in training funded by the Govemment:
(1) The training ofnon-Government personnel must be incidental to the training of Govemment employees and be in the public interest.
(2) Non-Govemment personnel may occupy training slots only after the opportunity has been afforded to eligible Government employees.
c. Training Opportunities for Contractor Personnel. In addition to the restrictions on the training ofnon-Government personnel identified above, contractor personnel may only be trained in skills they are not required to bring to the job. Contractor personnel may be trained in rules, practices, procedures and/or systems that are unique to the FAA and essential to the performance oftheir assigned duties. Always consult with the Contracting Officer before
allowing contractors to attend any training session.
303. TRAINING NEEDS ASSESSMENT.
FAA technical training, both for an individual or a group ofemployees, must be based on a training needs analysis and assessment process. The analysis process assists in the
determination that the training is appropriate and necessary to accomplish official duties in support ofthe agency's mission. Official duties are those related to their present position and assigned workload. A needs assessment or approval is not required for training mandated by law or which employees attend on their own time, at no cost to the Government. Completion ofthe Training Needs Assessment (TNA) form is the responsibility ofthe organization sponsoring the training. Two types ofTraining Needs Assessment fonns are required for use, Group and Individual. The type ofform used is dependent upon the intended audience ofthe
training course. A Group Assessment is utilized when two or more employees require the training. An Individual Assessment is utilized when only one employee requires the training. These forms, instructiq,~.Jor completion ofthe form and samples are located in Appendix 1. The AF TPMO shall refain all completed needs assessment forms for three years.
a. Group Assessment. The organization sponsoring, managing, funding, designing, or conducting the group training shall complete group Training Needs Assessments. The National AF Training Division shall ensure that the group assessment process is completed for all centralized training efforts. Both CMD and the FAA Academy have incorporated this requirement into course development and/or delivery. When the trainee fits within the target audience description, this form is not required.
· b. Individual Assessment. Individual Trairiing Needs Assessments are necessary for training that is being procured from a commercial vendor or that is being internally developed. The individual or supervisor requesting the training shall complete the assessment, ensuring
that the training is required for the employee. They are required when an employee:
(1) Does not meet the target audience identified in the group assessment; e.g., FAA Academy or locally arranged and conducted training.
(2) Attends any type oftraining for which no needs assessment has been completed.
304. TRAINING APPROVAL.
Supervisory approval is required before an employee participates in training. This approval must take into consideration available resources, cost-effectiveness, legal requirements and restrictions, current workload, training location and assessment ofthe requirement to train the employee.
305. TRAINING SELECTION.
Nomination and selection ofemployees for training is a supervisory responsibility and shall be
accomplished through appropriate procedures in support ofthe organization's mission. Selection ofemployees for learning and development activities that primarily prepare them for advancement, and are not directly related to improving performance in their current positions, must confonn to the appropriate collective bargaining unit agreement, Uniform Guidelines on Employee Selection Procedures and also to the merit principles adopted in the FAA Personnel Management System. In accordance with congressional training regulations, participants shall receive advance notice oftraining content and methods prior to attendance.
306. PRE/POST-TRAINING COUNSELING.
Pre- and post-training counseling is a requirement for any employee attending training. Recommended pre- and post-training counseling forms, instructions for completing the fonns and examples are located in Appendix 1. Organizations have the authority to locally develop their own pre- and post-training counseling forms as necessary.
a. Pre-Training Counseling. Prior to an employee's attendance at training, the immediate supervisor shall conduct a pre-training counseling session. At a minimum the following items must be addressed:
(1) Training course objectives and expected outcomes ofthe training.
(2) Verify that course prerequisites have been met.
(3) Travel requirements.
(4) OJT and/or certification requirements.
(5) Other infonnation useful to the student.
b. Post-Training Counseling. Within 60 days following completion oftraining and the employee's return to position, the immediate supervisor shall provide the employee a posttraining counseling session. Discussion ofthe training results and post-training assignments will be completed at that time. The supervisor, when appropriate, will make course recommendations to the training provider through the AF TPMO when corrective action is necessary due to inadequate training or suspected deficiencies.
307. AGREEMENT TO CONTINUE IN SERVICE OF AGENCY.
An Agreement to Continue in Service may be required as a condition of employees attending training activities. Guidelines are provided in the agency's Human Resource Policy Manual.
308 - 309. RESERVED
308 - 309. RESERVED
This page left intentionally blank.
SECTION 2. POLICIES AND GUIDELINES WHEN ATTENDING TRAINING
310. GENERAL.
This section contains policy and guidelines regarding student conduct while in training status, leave administration, voluntary departure from training, noncontiguous training assignments, resolution ofpersonal problems, use ofofficial duty time for training, training environment standards, examination control, unsatisfactory completion of assigned training and remedial training plans. Training specialists shall implement these procedures at their organizational level to ensure efficient and orderly management ofthe technical training program.
SECTION 2. POLICIES AND GUIDELINES WHEN ATTENDING TRAINING
311. CONDUCT.
Conduct issues while attending training will be resolved at the lowest level possible. The training provider will counsel the student in an effort to resolve the issue. Ifunsuccessful, the training provider will contact the field organization manager. Non-FAA training providers
shall coordinate with the appropriate FAA designee. The training provider may return students to their facility without a certificate ofcompletion with the concurrence ofthe field organization manager. In this case, the AF TPMO will be advised ofthe disposition ofthe training quota involved.
a. Supervisory Responsibility. The FAA training provider shall be regarded as a supervisor's representative to an employee in training status.
b. Student Responsibility. Employees attending training are subject to FAA and the training provider's regulations regarding personal conduct. Insubordination, unexplained absences and other serious offenses shall be cause for termination oftraining and further disciplinary action. It is expected that students will maintain a professional demeanor and spirit ofcooperation while in the training environment. Students are expected to:
(1) Treat fellow students with respect.
(2) A void disruptive behavior.
(3) Report to class on time and in a condition that will ensure the highest level of learning.
(4) Put forth the best effort toward satisfactory completion ofthe training.
(5) Use only authorized assistance or materials to complete the training.
(6) Report any instance ofunauthorized activity, e.g., duplication, removal, or otherwise compromising ofclassroom or test material, or any other fonn ofimproper or unethical behavior.
(7) Conserve and protect Federal funds, property, equipment and materials.
(8) Groom and attire themselves in a neat and qlean manner that is appropriate to conduct Government business.
(9) Adhere to the schedule and actively participate in all training activities unless excused through approved leave.
312. LEAVE.
When a student is in a training status, the following procedures for leave administration shall be executed.
a. Fixed-schedule training. Only sick leave and emergency annual leave can be approved for an employee in a fixed training schedule status. The training provider will repmi all student absences to the employee's supervisor. Requests for leave shall be forwarded to the supervisor through the training provider.
b. Self-paced training. If enrolled training is self-paced and doesn't adhere to a fixedclass schedule, all forms ofleave may be granted. Attention to adequate time to complete within the allocated timeframe should be considered where feasible.
313. DEPARTURE BEFORE COURSE COMPLETION.
A student may depa1i from training due to an emergency or other unusual circumstances upon approval oftheir supervisor. When a student fails to complete a course due to an early departure, notification froni the training provider should explain the departure and shall be fmwarded to the AF TPMO. Ifreasonable grounds for withdrawal are detennined, the employee will be rescheduled ifpossible. When students are withdrawn from a training course, a grade ofWITHDRAWN will be given for that course in their official CPMIS history. The training provider, AF TPMO and the employee's supervisor will jointly determine approptiate action for the student to complete the training requirement.
314. NONCONTIGUOUS ASSIGNMENTS.
When justified and advantageous to the Government, it may be advisable to enroll employees into more than one class without returning them to their permanent duty station. When there is
an intervening period between classes, prior arrangements shall be made to assign students to supervised training or other work assignments. These anangements shall be documented in writing. The AF TPMO must ensure that prior approval to remain in temporary duty status is obtained from the funding organization.
315. PERSONAL PROBLEMS WHILE IN TRAINING STATUS.
The following contact process shall be followed when a student must deal with a personal
problem wh"l · 1 e m trammg status: If Then
Student has a problem Contact the instructor or site administrator Unable to resolve the problem Contact instructor or site administrator's supervisor Still unable to resolve the problem Contact the employee's supervisor
316. USE OF OFFICIAL DUTY TIM~ FOR TRAINING.
The AF Course Catalog lists the maximum time allowable for the completion ofnationally
arranged and/or conducted AF courses. The hours listed in the AF Course Catalog shall be considered as the base time required when establishing the amount ofofficial duty time the employee may be granted to complete the course. The enrollment and administration requirements of each course, such as class schedule (fixed schedule or selfpaced), training materials and training delivery method (CBI, con·espondence study, on-the-job training, resident, etc.), must be considered when establishing employee-training schedules. A supervisor shall provide adequate time to the employee for completion ofthe required training. Regardless ofwhether the student is enrolled in resident, field or distance learning training, he/she must be considered unavailable for regular duty assignments during hours scheduled for training. Management will make a reasonable effort to ensure that employees enrolled in.job required training will be relieved from other duties while directly engaged in training. Only in unusual circumstances should a training schedule be interrupted or modified; e.g., emergencies or situations that impact NAS safety.
317. TRAINING ENVIRONMENT.
The training provider and the National AF Training Division are responsible for ensuring that training is conducted in the most favorable environment possible that is conducive to learning.
318. EXAMINATIONS.
Every employee in the training community is responsible for safeguarding the integrity ofall examinations. The following procedures shall apply to the administration ofany supervised examination:
a. A FAA designated examiner must supervise each examination. All training providers are designated as examiners/proctors. The training provider is responsible for selecting a proctor who can demonstrate qualities ofobjectivity and fairness in proctoring an examination.
b. Examiners shall arrange for the examination to be conducted in the most favorable environment possible. The examination should be scheduled during working hours.
c. Examiners shall ensure strict compliance with all instructions that are furnished with the examination. They shall prepare the area to be used for the examination, give the examinee any necessary instructions, control and time the examination as presc.tibed, and process the examina.tion as instructed. ·
d. The contents ofthe examination shall not be discussed or disclosed by examiners or examinees.
e. No part ofan examination may be reproduced or copied.
f. Any person having personal knowledge of a violation, who fails to report it or take appropriate action, may be subject to the same penalty as the individual guilty ofthe violation.
319. FAILURE TO SUCCESSFULLY COMPLETE ASSIGNED TRAINING.
Failure to complete assigned training may be caused by the inability to complete the training within the assigned time and/or the inability to obtain a passing final grade. Failure to successfully complete an assigned training requirement shall be addressed as a performance
issue. The following sequence of events shall take place when a student fails to successfully complete assigned training:
a. The individual~upervisor is notified tlu·ough the AFTPMO.
b. A remedial training plan shall be established.
c. The student attempts the theory-of-operations exam, ifavailable. (This is the first entry on the remedial training plan.)
• A minimum of 30 days is required between attempts.
• The field organization manager may grant a written waiver of the 30-day minimum. The written waiver must be sent to the appropriate training provider.
d. If a theory-of-operations exam is failed or is not available, the course and/or final examination shall be retaken (as reflected by the remedial training plan).
• Two attempts are pennitted to satisfy a tr<;1ining requirement, regardless ofthe training delivery method.
• The AF Division Manager/Program Director may, by wtitten waiver, authorize additional attempts.
320. REMEDIAL TRAINING PLAN.
Employees who fail assigned training will be provided a remedial training plan. Satisfactory progress is determined by the employee meeting all ofthe requirements outlined in the remedial training plan. Failure to satisfy the requirements established in the remedial training plan may subject the employee to reassignment, reduction-in-grade, or separation. Managers
and employees shall collaboratively develop remedial training plans within 30 days ofthe training assignment failure. Managers shall implement the plan, monitor employees' progress and are responsible for detetmining the reason for any lack ofprogress.
321 - 329. RESERVED
321 - 329. RESERVED
SECTION 3. ENROLLMENT/COMPLETION PROCEDURES AND
__ REQUIREMENTS
330. GENERAL.
This section provides guidance for employee enrollment in any training activities. CPMIS is the national database where training enrollments reside. Any locally established procedures must accommodate enrollments into CPMIS.
__ REQUIREMENTS
a. Before training begins) all prerequisite training requirements must be completed unless otherwise waived in accordance with Chapter 6 ofthis order.
b. Enrollments must be made sufficiently in advance oftraining to ensure the student will receive course materials and related infonnation. Appropriate enrollment procedures shall be used for the specific training delivery media.
c. The supervisor shall assign an employee to training and notify the training specialist of the assignment. The training specialist shall ensure the enrollment is completed.
331. RESIDENT TRAINING.
The training specialist shall initiate resident training enrollments in CPMIS in accordance with locally established procedures.
332. DISTANCE LEARNING.
Distance learning encompasses a wide variety oftraining delivery methods conducted without the student being at the same physical location as the instructor. Some courses have follow-on lab portions that must be completed to receive credit. Therefore) the enrollment procedures vary for each course delivery method.
a. Correspondence Study. Correspondence Study Enrollment Application, AC Form 3145-2, or on-line equivalent shall be used for enrollment. This form is available on the FAA Information Superhighway for Training (FIST) and in Appendix 1 ofthis order. The employee's supervisor will automatically be designated as the site administrator and is delegated the authority to administer related supervised examinations. These enrollments are to be forwarded to the FAA Academy, Correspondence Studies Office.
b. Computer Based Instruction (CBI). The training specialist shall initiate CBI training enrollments in CPMIS in accordance with locally established procedures.
c. WEB/Other. Web-based and other types oftraining delivery media require various enrollment procedures. Established procedures shall be followed in completing these enrollments.
333. OUT -OF-AGENCY TRAINING.
The training specialist shall initiate Out-of-Agency training enrollments in accordance with established procedures.
334. LOCALLY ARRANGED AND/OR CONDUCTED TRAINING (LACT).
Emollment in LACT shall be in accordance with established local procedures.
335. ON-THE-JOB TRAINING (OJT).
The training specialist shall initiate OJT enrollments in CPMIS in accordance with locally established procedures.
336. MINIMUM ATTENDANCE REQUIREMENTS.
To receive maximum benefits from training, an employee is expected to be present for training
100 percent of the time. However, under extenuating circumstances, absences can be excused. In order to receive credit for course completion, a minimum attendance of80 percent is required. Additionally, attendance at the final end of course critique is mandatory.
337. TRAINING COMPLETION.
Satisfactory completion ofa course requires:
a. Overall examination average of 70 percent or better on graded examinations or passing grade on pass/fail examinations.
b. A passing grade in at least 50 percent of the subject areas, for courses with more than four graded examinations.
c. Completion ofall required laboratory exercises.
d. Satisfaction ofminimum attendance requirements.
338. TRAINING CERTIFICATES.
A certificate oftraining shall be issued for all training completions. Nationally approved training certificates will be generated when a grade is entered into the employees' official CPMIS training history. All other training will require training specialists to generate a local cettificate unless the training provider provides one. When employees attend required training that does not have a FAA course number, they shall provide the training specialist with documentation of course attendance. This may be a transcript, a completion certificate or other similar official proof ofattendance. These courses shall be recorded in the student's training history using a course number of 00000. Refer to Appendix 1 ofthis order for a sample Certificate ofTraining that is available for use. Organizations may locally develop their own Certificate ofTraining forms.
339. TRAINING HISTORIES.
All approved technical training activities, regardless ofcourse grade, shall be recorded in the
employees' official training histories in CPMIS.
SECTION 4. TRAINING INFORMATION RESOURCES
SECTION 4. TRAINING INFORMATION RESOURCES
340. GENERAL.
Numerous training resources are available to provide information for overall management of the teclmical training program.
341. FAA INFORMATION SUPERHIGHWAY FOR TRAINING (FIST).
FIST gives access to training and certification information for all employees and specific infonnation for FAA Academy students. FIST is an information system accessed through various communication protocols. Various access levels are available within FIST depending upon needs ofthe customer. Contact the FIST administrator at the FAA Academy to obtain access. The following information can be found on FIST: AF Academy organization, course catalogs, class schedules, course equivalencies, course managers, student services, training and certification documents, forms and AF training program software.
342. CONSOLIDATED PERSONNEL MANAGEMENT INFORMATION SYSTEM (CPMIS).
CPMIS is the agency's official source ofpersmmel training histories, course profiles, class schedules and personnel training enrollments.
343. OTHER RESOURCES.
Other training information resources are:
a. National schedule (NSKED) reports are generated daily. The report provides course and class enrollment status and quota assignment.
b. The AF Training Catalog is available on FIST.
c. Web and other commercial vendor catalogs.
d. Airway Facilities Training Planning System (AFTPS) provides many resources such as employee training histories, facility to course links and course equivalency tables.
344 - 349. RESERVED.
3000.IOB
This page left intentionally blank.
SECTION 5. OTHER INFORMATION
SECTION 5. OTHER INFORMATION
350. GENERAL.
This section provides other information that can be useful in the management ofthe technical
training program.
351. ALTERNATIVE TRAINING RESOURCES.
Organizations are encouraged to make use of cost effective alternative resources as necessary, to meet the requirements for providing training (e.g., universities, community colleges, commercial-off-the-shelf and locally arranged and conducted training).
352. DEGREE PROGRAMS AND NONDEGREE COURSES.
The FAA may support employees pursuing academic degrees that address specific organizational and mission related requirements. These programs may entail continued service agreements. The individual employee will assume any tax obligations levied by the U.S. Internal Revenue Service.
353. FUNDING.
Funding may be provided for these programs at the option ofthe agency:
a. Basic Requirements. Learning and development are properly viewed as strategic investments rather than discretionary expenditures. Organizations are responsible for planning and justifying required learning resources as part oftheir regular budget process. Organizational funds will be identified and allocated to support the core-learning infrastructure. Common cost models, pricing guidelines and accounting practices shall be adopted AF-wide. Training providers will establish servicing agreements with internal and external (e.g., AT, ANI, AOS, AOP) customers to optimize utilization and offset overhead expenses.
b. Authorized Training Expenses. Learning and development activity expenses for which full or partial payment may be authorized are: tuition and matriculation fees, travel and per diem, library and laboratory services, purchase or rental ofbooks, materials and supplies, membership fees, conference fees, parking fees, pre-enrollment fees, pre-testing fees and remedial training.
(1) Tuition assistance may be provided for education directly related to NAS support pursued by employees. Participants may be required to sign continue in service and/or reimbursement agreements. These agreements must be submitted in advance of commitment to a schooL The employee will assume any tax obligations levied by the U.S. Internal Revenue
Service.
(2) Travel and Per Diem is approved in accordance with the FAA Travel Policy.
(3) Library and laboratory services that are an integral part ofan approved course or program ofstudy.
(4) Books, materials and supplies that are an integral part of an approved course. A magazine subscription used in a training course or program of study is a pennissible expense.
(5) Organizatiom-are encouraged to support employee participation in professional societies for purposes of continuing education and professional development. Professional conference fees and fees for a FAA membership in professional societies are pennissible learning and development expenses. Membership dues or initiation fees for individuals are not pennissible expenses.
c. Restrictions to Payment of Training Expenses. There are some restrictions on payment oftechnical related training expenses:
(1) Professional Societies. Funding ofan individual membership fee is not a pennissible learning and development expense. Employees should be encouraged to attend meetings ofprofessional societies when they can be spared from their assigmnents and their
attendance would be advantageous to the FAA or attendance would enhance th_eir perfonnance.
(2) Tests/Examinations, Certifications, and Licenses. The FAA may only test/examine employees for job t:elated competencies using valid, reliable instruments. Therefore, the FAA may only pay for written or perfmmance tests/examinations that are directly .related to FAA approved training activities. These tests/examinations may be part of training or used as a diagnostic tool to be used in the assessment and diagnostic process leading to a developmental plan. The FAA may not train or pay employees to take written or performance tests/examinations (such as CAN, PE, MCSE, Boiler Operator, Private Pilot, etc.) in order to obtain better scores. Funding is permitted ifthe primary purpose is to attain or improve skills related to the duties ofthe employee's present job or a job that the employee can reasonably be expected to perform in the near future and preparation for a test/examination is merely a by-product.
d. Other Restricted Costs.
(1) Professional certificates required as a qualification for the employee's position.
(2) Professional accreditation.
(3) Ifcompliance with state requirements is mandated by Federal statute, the FAA may, at their own discretion, spend approptiated funds to reimburse their employees for licensing or certification fees required to perfonn their duties.
354. INSTRUCTOR QUALIFICATIONS.
At a minimum, FAA instructors must possess knowledge ofthe subject area and meet the
following qualifications in order to ensure effectiveness in the delivery ofcourse content in a wide variety ofmedia:
a. For Academy instructors, the basic requirement is successful completion ofthe agency's Basic Instructor Training course.
b. For field instructors, the basic requirement is the successful completion ofthe agency's Facility Instructor Training course.
c. For OJT instructors who will be providing OJT in support ofoperational maintenance and restoration ofcertifiable NAS facilities, the basic requirement is the successful completion ofthe agency's Airwa~¥acilities Formal On-the-Job Training course.
d. For OJT instructors providing training on non-certifiable or precommissioned equipment or systems, the agency's On-the-Job Training Techniques course should be successfully completed.
e. Different delivery media may require additional presentation skills. Therefore, followon training may be required in order to maintain an effective level ofinstructional skills.
f. Evaluations shall occur after instruction is implemented to assess the overall effectiveness and/or efficiency ofthe instructor. The instructor evaluation process is the responsibility ofthe sponsoring organization and should be documented at that level. Copies ofthe evaluations and feedback shall be provided to the instructor.
355- 359. RESERVED.
This page left intentionally blank.
SECTION 6. TRAINING RECORDS
SECTION 6. TRAINING RECORDS
360. GENERAL.
This chapter provides information and guidance for AF training specialists on the preparation, distribution, and maintenance oftraining certificates, repmis, records and forms.
361. ASSIGNMENT TO TRAINING.
When an employee is assigned to training, the following data must be furnished to the employee and the training provider:
a. Employee's name.
b. Social Security Number (in accordance with the Privacy Act or applicable Federal or state laws).
c. Course number and title.
d. Class number (if appropriate).
e. Dates and times oftraining course.
f. Location oftraining course.
g. Title and mailing address ofmanager or organization to receive the grade report and/or training certificate.
362. DOCUMENTATION OF NOTIFICATION.
Employees must receive notification ofthe course content and the training method that will be used. Notifications for nationally arranged courses (Academy and Academy contracted Out
of-Agency) are the responsibility ofthe Academy and are sent directly to the employee. For locally arranged and/or conducted courses, the sponsoring organization is responsible for the notification process.
363. TRAINING CERTIFICATES.
Each employee shall be provided with a certificate upon successful completion ofany agency conducted or sponsored course.
a. The certificate issued to the employee should contain the following information:
(1) Employee's name.
(2) Social Security Number.
(3) Course number and title.
(4) Location oftraining.
(5) Number ofhours.
(6) Statement ofsuccessful completion.
(7) Date of completion.
(8) Signature ofissuing official.
b. Refer to Appendix 1 ofthis order for a sample Training Certificate that is available for use. Organizations ma~cally develop their own Training Certificate fmms.
364. RESPONSIBILITIES.
Specific responsibilities for the recording, generation, distribution and formal documentation oftraining certificates are listed below:
a. FAA Academy shall record student grades in CPMIS-for all Academy Resident, Distance Learning, and Academy-contracted Out-of-Agency training courses. The AF TPMO shall ensure that certificates are generated and sent to the appropriate organization.
b. Regional and Field Organizations shall generate and distribute certificates for locally atTanged and/or conducted training courses. These training certificates shall be sent to the AF TPMO to be input into the employee's CPMIS training history.
c. Training specialists shall fonnally document and file the certificate into the employee's training record then distribute training certificate(s) to the employee's manager, who forwards the training certificate to the employee.
365. PROCEDURES.
For FAA Academy resident, distance learning, and Academy contracted Out-of-Agency courses, CPMIS information is entered into the employee' s training history following the completion ofthe course.
a. The AF TPMO shall ensure that two copies ofAC 3000-36, Certificate ofTraining and Official Personnel Record, are generated and distributed to the field organization. The original copy is sent to the employee's first level supervisor/manager, who then provides it to the employee. The copy is placed into the employee's training record at the organizational level that maintains the employee official training records.
b. For locally arranged and/or conducted courses, the sponsoring organization shall generate three copies ofthe training certificate (sample at Appendix 1). The original copy is sent to the employee's first level supervisor/manager, who then provides it to the employee. One copy is placed into the employee's training record at the organizational level that maintains the employee official training records. The third copy is then sent to the AF TPMO to be input into the employee's CPMIS training history.
366. FORMS AND EXAMPLES.
Appendix 1 contains fonns for use in the AF Technical Training Program. The examples
Appendix 1 contains fonns for use in the AF Technical Training Program. The examples
shown are intended to provide guidance to personnel involved in utilizing the fonns and making these entries.
367- 399. RESERVED.
CHAPTER 4. TRAINING REQUIREMENTS AND QUOTA
MANAGEMENT
400. GENERAL.
CHAPTER 4. TRAINING REQUIREMENTS AND QUOTA
This chapter provides guidance and criteria to determine organizational training requirements and the management oftraining quota. Quota management is the identification oftraining requirements and the processes to ensure maximum utilization of allocated quota. This includes the assignment ofquota, the enrollment and notification processes, and provides a method ofadjustment for changing circumstances. Inherent in the process is ensuring that the right person attends the right training at the right time. Quota management is not limited to just the annual call but is an on-going process. The procedures described below are in place to
ensure accountability.
401. AIRWAY FACILITIES ANNUAL CALL FOR TRAINING (CALL).
During the second quarter ofeach fiscal year (FY), the National AF Training Division issues a notice or CALL to all AF field organizations to identify their training requirements for the next fiscal· year (FY). This call includes all technical, logistics, Occupational Safety Health and Environmental (OSH&E) and Management and General (M&G) training. Some courses offered by the military are not covered in this call and are addressed separately by the FAA Academy. All new equipment (1 E) training is handled directly by the National AF Training Division and may require validation from the field. Funding allocation for locally arranged and/or conducted training (LACT) is covered under a separate action by the National AF Training Division.
a. This is an automated process that uses the current AF training management tool to calculate and/or generate operationally essential (OE) training requirements for a specific cost center. This process consists ofthree levels ofreview, the initial validation and adjustments by the first level supervisor, a field organization level review and a regional review.
b. To calculate OE requirements, this system interfaces with the Facility, Service, and Equipment Profile (FSEP) and CPMIS databases. A comparison is made between the number and types ofsystem, subsystem, and equipment against the organization's employee training histories (including current Academy course equivalencies) in a given cost center. The resulting calculated number is based upon the OE training standards (Paragraph 403) and
defined within the current annual call guide. Managers must validate these calculated requirements and submit requested adjustments to their field organization. Requested
adjustments can add requirements that were not calculated or delete requirements that are no longer needed. Supervisors may exceed the OE standards provided the AF TPMO approves the justification. The AF TPMO reviews these requirements and forwards them to the National AF Training Division to establish the training requirements for the next FY. In order to produce accurate requirements, it is essential that the information in FSEP and CPMIS be validated prior to each annual call event.
402. NATIONAL PROGRAMMING CONFERENCES.
The National AF Training Division shall conduct four training programming events during each FY.
o~o-~ · a. The first is a preprogramming roll up ofall initial requirements identified during the CALL and will occur during the April/May time frame ofeach year. Representatives from all participating organizations will meet with the National AF Training Division and the FAA Academy AF Division to balance quota requirements against predicted Academy resources and tli.e national training budget.
b. Second, third and fom1h quarter reprogramming reviews shall be conducted by the National AF Training Division stat1ing the first week ofNovember, February, and May. This is the manager's oppot1unity to make real time adjustments to their initial call requirements.
403. TRAINING CATEGORIES.
Technical training is prioritized into eight categories as listed below:
a. Operationally Essential-New Equipment Training. Training which is required to support the first time installation ofnew equipment within the NAS. To ensure qualified personnel are available to meet delivery schedule, the National AF Training Division will
determine the new equipment training requirements. The number to be trained will be in accordance with the established and approved training standard.
b. Operationally Essential-Attrition Training. Training required to maintain an organization's minimum required number oftrained personnel.
c. Operationally Essential-New Hire Training. Training that must be completed by an AF technical specialist prior to any specific equipment courses, typically concept courses.
d. Operationally Essential-Military Driven Training. Training required to maintain/sustain joint use facilities or fulfill support agreements with the military.
e. Operational Training. Training needed to improve/enhance the operation ofan organization. This training is not operationally essential but will improve the ability ofan organization to provide backup for other personnel assigned workload responsibilities or provide training for a potential vacancy due to the possibility ofpromotions and eligibility for retirements. Operational training is the first priority to be funded after operationally essential training is funded.
f. Organizational Training. Training needed to improve/enhance the organization's ability to respond to changes in workload or staffing. Organizational training is the second priority to be funded after operationally essential training is funded.
g. Position Training. Training needed by an individual employee to improve/enhance their ability to perform duties ofthe position. Position training is the third priority to be funded after operationally essential training is funded.
h. Career Training. Training needed to improve/enhance the individual employee to help achieve their career goals. Career training is the fourth priority to be funded after operationally essential training is funded.
3000.IOB
404. TRAINING DELIVERY METHODS.
The most effective method will be determined by the field organization manager and the employee's supervisor,~nased on employee's needs and available resources. Methods include:·
a. Resident training.
b. Distance Learning (DL).
c. Field conducted training.
d. Out-of-Agency training.
e. Equivalent training obtained from sources other than the FAA that the Academy AF Division deems equivalent to FAA sponsored training.
f. Theory-of-Operations Examination may be utilized as an equivalency for resident training courses.
g. Locally Arranged and/or Conducted Training (LACT).
h. On-the-Job Training (OJT).
405. PROCUREMENT OF TRAINING.
No employee, other than a Contracting Officer or a recipient ofa Delegation ofProcurement Authority (DP A), operating within the limits oftheir authority, may enter into formal contracts, auth01ize contract modifications or otherwise bind, commit, or obligate the Federal Government contractually for training. Procurement oftechnical training shall be in compliance with Title 5 Chapter 41 ofthe United States Code, the Government Employees Training Act of 1958, current Public Law (with appropriate needs assessment), Air Traffic
Services Training Order 3000.22, and Human Resources Policy Manual (HRPM) LD-5.5.
406. EMERGENCY QUOTA REQUIREMENTS.
Emergency quotas are defined as immediate requirements, without which the organization's ability to maintain and/or certify the NAS would suffer severe and/or lasting impact. They do not include preparing for any contingency regarded as remotely possible in the future. The priority must also be operationally essential (OE) as defined in the annual call guide. The supervisor shall identify the need, in writing, on the Emergency Quota form, and route to the field organization manager through the AF TPMO. The AF TPMO shall coordinate within their organization and with other AF TPMO's in an attempt to fulfill the requirement before submitting the request to the National AF Training Division. The National AF Training Division will determine the capability to accommodate the request and reply to the AF TPMO within 10 working days ofthe Division's receipt. An example and instructions for completing the Emergency Quota Fonn are included in Appendix 1.
407. REVIEW AND OVERSIGHT.
Congressional training restrictions, as defined in the latest version ofOrder 3000.22, require that training be job related and based upon a needs assessment. Currently, AFTPS provides this information for all operationally essential training for a specific cost center. Any release or movement of quota to cost centers not regionally approved during the Call shall be
documented by the supervisor. This documentation is an essential part ofa perfmmancebased organization. The field organization will coordinate these actions through the AF TPMO who shall be responsib}~or maintaining the documentation.
· 408. TRAINING RESERVE.
Training Reserve (TR) is funded training quota awaiting distribution and is managed by the National AF Training Division.
409. CPMIS QUOTA ENROLLMENTS.
All emollments must be entered into CPMIS at least 56 days before the start date ofthe class or else the quota will be automatically retumed to the Training Reserves (TR). Once the quota is in TR, the AF TPMO must contact the responsible Academy Branch to coordinate the retum ofthe quota to their organization ifit is still available.
410. NON-UTILIZED QUOTA.
Non-utilized quota is defined as any quota released to TR or any quota that slips to TR 56-days before the start date ofthe class. Non-utilized quota will require written documentation from the releasing organization and this documentation will be maintained by the AF TPMO.
411. QUOTA POP-UPS.
Quota pop-ups are defined as additional quota received by organizations that were not allocated to them during the Call-for-Training (this does not include lE quota allocated by the National AF Training Division). Pop-ups are another way to meet training requirements and
may become available with very short notice. Supervisors are responsible for providing justification for pop-up quotas not approved during the call. At a minimum, the justification
must include the category oftraining (operational essential, etc.) and the employee name. All justifications must be submitted to the organizational training specialist, to be forwarded and
maintained by the AF TPMO. ·
412. NO SHOWS.
No shows are defined as student failure to show for any training assigmnent. A written explanation ofthe reason for the no show is required to be completed by the responsible AF field organization. The AF TPMO shall be responsible for maintaining this documentation. The FAA Academy AF Division is responsible for notifying the National AF Training Division and the AF TPMO ofa no show for an Academy class.
413- 499. RESERVED.
CHAPTER 5. TRAINING PLAN AND PROGRESSION
CHAPTER 5. TRAINING PLAN AND PROGRESSION
500. GENERAL.
NAS operations is categorized in seven service areas. They are:
a. Communications.
b. Automation.
c. Surveillance.
d. Navigational.
e. Environmental.
f. Weather.
g. Aeronautical Spectrum.
The agency training program for AF personnel includes a comprehensive pattern of
development that may include elements ofmore than one service area, as required by organizational and work demands.
501. TRAINING PLAN.
Managers shall collaboratively develop a written training plan, FAA Form 3000-14, with each employee requiring training. New employees shall have a training plan within 30 days of entering on duty. This plan will identify the training goal and the courses or methods to be employed in obtaining this goal. The training plan will include, but is not limited to, theory of operations, prerequisites, and on-the-job training. Each item should be sequenced according to a timetable, and a proposed date for completing each phase shall be included. FAA Information Superhighway for Training (FIST) can be used as a reference source to develop a training plan. The training plan will be reviewed with the employee at least annually and updated as required. This review shall be documented on the training plan by having both the supervisor and
employee date and sign the fonn. This plan is to be tailored to each individual's job requirements. An example and instructions for completing the Training Plan form are included in Appendix 1.
502. CONDITIONS REQUIRED FOR TRAINING PROGRESSION.
Satisfactory training progress is required of both new employees and employees currently in established workload positions.
a. New employees will be counseled within 30 days of entering on duty to ensure they understand that continued employment is contingent upon satisfactory completion ofrequired training assignments.
b. All other employees in positions requiring new or additional training shall complete training within specified time frames.
c. Progress will be considered unsatisfactory under the following circumstances:
(1) Failure to successfully complete any assigned training.
3000.IOB
(2) Failure to meet time limits established in the training plan. The manager may extend the limits specified in this plan if completion is prevented by circumstances beyond the control ofthe employe-r.:._
d. Supervisors shall monitor progress ofemployees enrolled intraining and shall address unsatisfactory progress.
e. Employees who fail or are withdrawn from assigned training will be provided a remedial training plan. Failure to satisfy the requirements established in the remedial training
plan may subject the employee to reassignment, reduction in grade or separation.
503 - 599. RESERVED.
CHAPTER 6. PREREQUISITES, EQUIVALENCIES AND WAIVERS
600. GENERAL. __
A prerequisite is a course (or series ofcourses) that must be successfully completed prior to any training assignment. Prerequisites prepare students for advanced concepts and may be an element ofthe overall theory ofoperations requirement for personnel certification authority. The employee, with management guidance, is responsible for ensuring that all prerequisites are successfully completed. An equivalency is achieved by successfully completing a nationally approved examination or by documenting a level ofknowledge comparable to that, which could have been achieved by taking the course(s). Training will not be provided unless all course prerequisites have been met or a waiver of the prerequisites has been approved. A waiver temporarily authorizes the relinquishment ofcertain training requirements. Students
600. GENERAL. __
that arrive for training and do not meet the prerequisites or have an approved waiver shall be returned to their duty location at the expense oftheir parent region. The AF TPMO will ensure that the travel is not funded out of centralized training.
601. PREREQUISITE IDENTIFICATION.
The FAA Academy AF Division designates courses that are prerequisites to others, and therefore, must be completed prior to enrollment in the subsequent courses. The National AF Training Division has final approval a~thority. CPMIS is the official source ofcourse infonnation including prerequisites. Other reference sources are available on the FAA Information Superhighway for Training (FIST), maintained by the FAA Academy. The AF
equivalency table is available on FIST. The equivalency table provides specific guidance to determine equivalencies for cuiTent prerequisites.
602. EQUIVALENCIES.
Equivalencies are based upon successful completion ofa nationally approved examination or by the student's prior training, usually completed outside the FAA. The FAA Academy AF Division, is the approving authority for equivalencies. The information required from the employee for equivalency consideration includes but is not limited to, official college transcripts, official certificates, and official Military Forms DD-214 or DD-2586. Complete course descriptions from the training provider must be included with the equivalency request. Equivalency requests must be routed through the training specialist and AF TPMO to the appropriate FAA Academy Branch Manager. The AF TPMO will record approved equivalencies in the employee's CPMIS official training history. An example and instructions for completing the Equivalency Fonn are included in Appendix 1.
603. OPERATIONAL NECESSITY WAIVERS.
An Operational Necessity waiver is the temporary deferment of a prerequisite requirement, which allows the technical specialist to attend one specific course or class. It is to be used only for emergency operational situations. Emergency situations include those that would result in a degradation of safety or significant additional expense ifthe training were not provided at that time.
a. Waivers shall be requested in writing from the field organization manager and routed through the AF TPMO. An example and instructions for completing the Operational Necessity
Waiver Form are included in Appendix 1. All requests must include justification, describing the specific impact ifthe waiver is not approved.
b. The AF Divisiotrt1anager/Program Director is the approving official and this function· cannot be delegated below the Assistant Division Manager/Deputy Program Director. ·The AF TPMO shall ensure that the appropliate FAA Academy Branch Manager is notified when a waiver is approved. The training specialist shall ensure that the waiver is permanently recorded in the employee's training record. The student must complete the prerequisite within the time frame documented on the waiver.
604- 699. RESERVED.
CHAPTER 7. ON-THE-JOB TRAINING
CHAPTER 7. ON-THE-JOB TRAINING
700. GENERAL. __
This chapter provides policy, procedures, and criteria for the administration ofon-the-job training (OJT). OJT shall be utilized for training the following:
a. New-hire or reassigned employees.
b. Employees responsible for new systems, assignments, procedures and/or preparing for persormel certification authority.
700. GENERAL. __
c. Employees requiring remedial training because their proficiency is below an acceptable level.
701. DEFINITION.
OJT is required to support operational maintenance and restoration ofNAS facilities. OJT is a bridge between theory-of-operations training and the acquisition ofskills and knowledge required on a system, subsystem, equipment or services. It is a planned activity conducted to provide direct experience in the work environment where the employee is performing, or will perform, their duties.
702. RESPONSIBILITIES.
The specific responsibilities relative to the OJT program are outlined below:
a. National AF Training Division shall provide policy and guidance for the administration ofthe national AF OJT program. This includes development, approval, evaluation and overall program management to ensure a uniform and effective OJT program. They shall provide the necessary resources in support of the OJT program.
b. FAA Academy AF Division shall develop, validate, maintain and distribute approved OJT packages as directed by the National AF Training Division.
c. Regional AF Division shall provide regional policy, guidance and resources required for administration ofthe OJT program. They shall forward all locally developed OJT packages to the National AF Training Division.
d. Systems Management Office (SMO) shall manage and administer the OJT program in accordance with established policy and directives. They shall forward all locally developed OJT packages to the National AF Training Division through the AF Regional Division Office.
e. Supervisors shall be responsible for ensuring that all OJT requirements are accomplished. They shall evaluate the effectiveness ofOJT as it relates to employee job proficiency and report the completion of OJT.
f. Instructors shall be responsible for local course development as required, and for delivering training that develops the trainee's proficiency.
g. Trainees shall be responsible for actively participating in, and successfully completing assigned OJT.
703. OJT PROCESS.
OJT shall be conducted within a reasonable time frame (established during the planning phase) after the successful completion oftheory-of-operations training or equivalency. This process ·· consists ofthe following three phases.
a. Selection of OJT Instructor. The following criteria must be satisfied to qualify an individual as an OJT Instructor:
(1) Have completed AF .OJT Techniques training course.
(2) Hold current certification authority on the applicable system, subsystem, equipment or service. (If personnel certification authority is not required on equipment, any qualified OJT instructor for that equipment can be used to provide the necessary training.)
(3) Be recommended by first-level supervisor.
(4) Be designated in writing by second-level supervisor or higher-level manager.
(5) When a qualified OJT instructor is not available, the second-level supervisor or higher-level manager may designate appropriate persmmel from a list ofvolunteers, to conduct OJT on an interim basis. Interim selection is on a case-by-case basis and expires upon completion ofthe OJT. It is recommended that interim OJT instructors possess 'skills in instructional methodology, and must satisfy paragraph 703 a.(2), (3), and (4).
b. Planning. The supervisor, OJT instructor and the trainee shall collaboratively develop a documented plan as to how the OJT training will be administered. This plan shall include:
(1) Utilization ofa nationally approved OJT package or a locally developed OJT package.and/or a performance examination, ifa nationally approved package is not available.
(2) Documentation ofthe trainee's perfonnance, progress and training time for all periods ofOJT.
(3) Targeted completion date.
c. Implementation. The implementation phase is the execution ofthe OJT plan, requiring specific tasks.
(1) The OJT instructor shall:
(a) Deliver instruction in the application ofknowledge and procedures on the system, subsystem, equipment or service.
(b) Allow the trainee to perform operational tasks only under their direction.
(c) Provide continuous progress reports to the trainee's supervisor.
(d) Provide guidance and counseling to the trainee.
(e) Report successful completion or recommend termination ofthe OJT to the trainee's supervisor.
(2) The trainee shall:
(a) Review training objectives with the OJT instructor.
(b) Complete the training assigrunents within the prescribed time frame.
Page40
3000.IOB
(c) Be prepared to receive OJT, counseling and direction from tlie OJT instructor.
(d) ExerCise initiative and study to the extent necessary to ensure satisfactory training progression.
(e) Perform operational tasks only under the direction ofthe OJT instructor.
(3) The supervisor shall:
(a) Assign and monitor OJT training activities.
(b) Evaluate the quality and standardization ofthe OJT delivery.
(c) Ensure that the OJT is productive and commensurate with the trainee's level of experience.
(d) Consider the OJT instructor's recommendations for continuation or termination ofthe OJT.
(e) Have the authority to tenninate OJT.
(t) Discuss the outcome ofthe OJT with each trainee. ·
(g) Ensure that ·the OJT is accomplished within prescribed timeframes.
Note: Second level supervisors or higher-level managers may grant extensions to allowable instructional hours under extenuating circumstances.
(h) Verify that all training times are recorded accurately and that the OJT Progress Form is completed and forwarded to the Training Specialist.
(4) The Training Specialist shall:
(a) Administer the respective organization's OJT program.
(b) Maintain OJT documentation and ensure that OJT completions are entered into CPMIS for inclusion in the employee's training history.
(c) Forward all locally developed OJT courses through the field organization's AFTPMO to the National AF Training Division.
(d) Maintain effective communication with all levels ofmanagement in support ofOJT as an integral part ofthe technical training program.
704. OJT FAILURES.
In the event of an OJT tennination, refer to Chapter 3 ofthis order for guidance on training failures.
705. LOCALLY DEVELOPED OJT COURSES.
A local OJT course is utilized when a national OJT course is not available. This course is normally developed by the OJT instructor and shall include all site-specific technical references.
a. Development Process. The OJT instructor shall utilize the appropriate Perfonnance Examination, Maintenance Handbooks, contractor developed publications, Technical
Instruction books or any other suitable technical documentation as references for developing the OJT course. All available performance examinations are located on FIST. All OJT courses shall include, but not b.,_~mited to, the following subjects:
(1) Safety and coordination.
(2) Test equipment.
(3) System interfaces.
(4). System operation.
(5) Preventive maintenance.
(6) Troubleshooting.
(7) Flight inspection (when applicable).
b. Instructional Hours. The autho1ized number ofinstructional hours for each local OJT course is established and maintained by the National AF Training Division. This information is listed on FIST. If any system, subsystem, equipment or service is not included on this list, the second level supervisor or higher level manager should set allowable training time for a locally developed OJT course.
c. Approval Locally developed OJT courses may be utilized after approval from the second level supervisor or higher-level manager. All local OJT courses shall be routed to the National AF Training Division. Once a national OJT course is established, it will supersede.all locally developed OJT courses for the part.icular system, subsystem, equipment or service.
706. DOCUMENTATION.
The on-the-job training process shall be documented on the On-the-Job Training (OJT) Progress Fonn or any locally developed form provided it captures all the documentation requirements ofthe OJT program. This form includes the planning, the employee's course progress and certification ofcompletion by the trainee, OJT instructor and supervisor. Successful completion of OJT must also be documented on FAA Fonn 3400-3 when the equipment requires personnel certification authority credentials (reference Order 3400.3X). An example and instructions for completing the OJT Progress Fonn are included in Appendix 1.
707 - 799. RESERVED.
CHAPTER 8. AF TECHNICAL SYSTEMATIC TRAINING
CHAPTER 8. AF TECHNICAL SYSTEMATIC TRAINING
DEVELOPMENT PROCESS
800. GENERAL.
This chapter describes the procedures, policy, criteria and guidance for the systematic design and development/revision ofnational training. The use ofthese design and development processes will ensure that training meets established training requirements.
DEVELOPMENT PROCESS
801. RESPONSIBILITIES.
Although functional responsibilities are delineated in various agency orders, the following specific responsibilities are provided to fonn the basis for a common understanding ofthe personnel resources and training process associated with planning, development, revision, and presentation for new equipment or existing training.
a. In accordance with FAA Order 2500.55, the Acquisition Program Manager shall:
(1) Provide for a system maintenance plan. This plan will describe how the new system will be maintained and the anticipated level ofinvolvement by field organizations, Academy, Logistics Center, and Operational Support (AOS). The plan will be coordinated
with the National AF Training Division to ensure that all personnel resources and training requirements are identified.
(2) Ensure that the training requirements are submitted to the Contracting Officer (CO) with the purchase request, when appropriate.
(3) Coordinate maintenance teclmical handbooks with AOS to establish appropriate certification requirements and maintenance responsibilities.
(4) After consultation with the National AF Training Division, ensure the inclusion of sufficient equipment in the contract for training purposes. Equipment types and quantities shall be based upon the projected field training requirements for the initial training phase, as well as attrition training. The training systems shall be located at the Academy unless
otherwise detennined by National AF Training Division and program office.
(5) Ensure that contract documents provide for equipment dedicated to training including all ancillary equipment, such as test equipment and special tools, in sufficient
q~antity and time to ensure that trained personnel will be available to meet the delivery schedule.
b. National AF Training Division shall:
(1) Coordinate with the Acquisition Program Manager for all personnel resources and training concerns, including training equipment for all new equipment programs.
(2) Serve as the training authmity between the Acquisition Program Manager and the field organizations for all training matters.
(3) Serve as the training authority between the Acquisition Program Manager and Academy.
(4) Develop training specifications/options and ensure appropriate AF course development standards and guidelines are utilized throughout the procurement process.
(5) Approve or-disapprove a submitted Training Initiative Request (TIR) and/or prepare a TIR.
(6) Detennine the training method by using the Academy Curriculum Modernization System (CMS) process.
(7) Approve or disapprove training course number.
(8) Approve or disapprove the Task And Skills Analysis (T ASA), Training
Development Plan (TDP) and'Course Design Guide (CDG) prepared in response to a TIR approved by the National AF Training Division.
(9) Ensure that effective and efficient utilization ofresources is maintained and the
need for major revision of contractor-developed training courses is avoided.
(10) Fund for contractor development and/or conduct oftraining when not otherwise funded.
(11) Provide a quality assurance program that enforces all AF course development standards and guidelines. Ensure training is educationally sound and meets the requirements specified in the TIR, TDP, T ASA, and CDG for either FAA or contractor developed/revised training.
(12) Notify the Academy when a new program requires the appointment ofan AF Element Manager for Training (AFEMT). The AFEMT shall have the appropriate background, experience, and knowledge to evaluate contract line items associated with the
contract.
c. The Academy AF Training Division shall:
(1) Develop and revise training courses inaccordance with the requirements specified in the TIR, TDP, TASA, CDG, all applicable training development orders, and AF course development standards and guidelines.
(2) Ensure that the most effective training technology is used in the course development process with due concern for cost/benefits, available reso_urces and established priorities.
(3) Provide a quality assurance program that enforces all AF course development standards and guidelines. Ensure training is educationally sound and meets the requirements specified in the TIR, TDP, TASA, and CDG for either FAA or contractor developed, revised training
(4) Notify the National AF Training Division ofthe AFEMT designee.
d. Field organizations shall:
(1) Develop and revise training courses in accordance with the requirements specified
ip. the TIR, TDP, TASA, CDG, and all applicable training development orders, AF course
development standards and guidelines. At a minimum, a TDP and a TASA should be completed for courses utilized locally.
(2) Ensure that tile most effective training technology is used in the course development process with due concern for cost/benefits, available resources and established priorities.
(3) Provide a quality assurance program that enforces all AF course development standards and guidelines. Ensure training is educationally sound and meets the requirements specified in the TIR, TDP, TASA, and CDG for either FAA or contractor developed/revised training
e. The AFEMT shall:
{1) Ensure that the training portion ofthe specifications for major equipment procurements conform to agency standards as contained in current version ofFAA-STD-028.
(2) Participate and provide written technical training advice and recommendations to the CO, when pre-award negotiation with prospective contractors takes place. Such advice and recommendations shall conform to the requirements of the appropriate specification.
(3) Ensure that contractor submissions oftraining documents and material conform to AF course development standards and guidelines. The AFEMT shall also analyze for conformity with contract requirements and forward comments and recommendations to the contractor through the CO.
(4) Monitor the conduct oftraining provided by a contractor in order to ensure the accuracy and content ofthe course. Academy assumption of course responsibility will be based on the quality of control.
{5) When a course conversion or major revision is required to an existing nationally approved course, the Academy shall designate a Subject Matter Expert (SME) in lieu ofan AFEMT (when necessary). The SME shall ensure the development of course material is in accordance with the outcomes and requirements in the TIR, agency standards and guidelines.
802. GUIDELINES FOR TRAINING DEVELOPMENT AND IMPLEMENTATION.
Technical specialists must be capable of analyzing the entire system and diagnosing any fault which may occur in the system down to the lowest level ofonsite repair. The technical specialist will require sufficient experience on the system before they can attain the desired level ofperformance and efficiency. The experience will be demonstrated by successful completion of a perfonnance examination leading to certification or other locally developed perfonnance criteria. All technical training shall be designed to aid the technical specialists in obtaining this level ofcompetence in the minimum time.
a. Criteria. All technical training shall be designed using the following standards to aid the technical specialists in obtaining the desired level of competence in the minimum time.
(1) All system/subsystem measurements, techniques and adjustment procedures should be compatible with those the trainee will use under actual operating conditions upon return to the field environment. Procedures found in national handbooks or other authorized instructions shall be used when possible. Where no authorized instructions exist, or a deviation
from approved procedures is desirable, course developers shall coordinate with AOS before finalizing instructional material.
(2) Every co~shall include all significant maintenance (and/or installation) and safety procedures that will be performed on the system.
(3) Courses will be designed to develop the student's ability to recognize system deficiencies, isolate faults and correct problems.
(4) Every effort shall be made to simulate the operating environment.
(5) If a significant number of students fail to complete the course successfully, the course should be evaluated as to the student entrance level, prerequisites and course content.
(6) Changes in course content, training methodology, or course length, as described in the TIR or a training development plan, must be approved by the National AF Training Division.
(7) Organizational elements proposing, developing, and/or conducting an AF training course shall be familiar with the AF personnel certification program.
b. Analysis Phase. This is the foundation for all other phases ofinstructional system design. All instructional programs will be planned and developed so as to assure that stated training requirements are fulfilled satisfactorily and on a cost-effective basis. Training will be operationally oriented and job-centered and designed to achieve the outcomes specified in the Training Initiative Request (TIR), Task and Skills Analysis (TASA), and Training Development Plan (TDP). All planning, development, presentation and testing will be based upon the trainee's need, improved efficiency and job specific effectiveness.
(1) Training Initiative Request (TIR). The TIR provides a direct means to identify training needs that are not cmTently met by existing AF courses. TIR submittals are accepted from National AF Training Division, Program Offices, Academy, regions and from other sources. An example and instructions for completing the TIR fotm are included in Appendix 1.
(a) TIRs that are funded will be evaluated for approval by the National AF Training Division. Ifapproval is granted the project will be guided by the established time lines.
(b) TIRs submitted without a funding source are evaluated over a one year cycle which starts in October ofevery year and ends the following September. The final recommendations to fund or not fund the TIR are made by the National AF Training Division. Ifthe TIR is approved for funding, it will be placed in a priority order with other approved TIRs.
(2) Tasks And Skills Analysis (TASA). The TASA consists of a listing ofmajor job duties and their accompanyfng tasks, subtasks and supporting skills and knowledge. Analysis ofthe results of the T ASA sets the direction for the training. Task statements are used as the basis for developing objectives and for laboratory activities and performance tests. The TASA process begins with defining the job and is conducted in four stages:
(a) Stage 1. List and describe the job duties and tasks.
(b) Stage 2. List and describe the·subtasks, elements and sub-elements.
(c) Stage 3. List and describe the knowledge and skills.
(d) Stage 4. Have SMEs and managers validate the tasks list. Revise any inaccurate or incompletetask information.
Note: Data gathered during Stages 1, 2 and 3 will be from interviews, direct observation, printed materials (training manuals, manufacturer's instruction books and manuals, FAA
orders and technical literature, etc.) surveys and/or questionnaires.
(3) Training Development Plan (TDP). The TDP is a work plan for developing a course. It is not intended to be a complete course control document. Only infonnation needed for approval ofthe course development effort should be included. The TDP should contain sufficient information to aid in making a decision to approve and authorize development or procurement oftraining. The TDP should include purpose, objectives, identification ofkey personnel, technical approach, products, deliverables, media selection analysis, cost analysis, funding requirements, schedule, issues, concerns or other pertinent training data. ·The TDP:
Converts the TIRIT ASA requirements into a recommended plan for achieving the desired training.
(a) Recommends a strategy to achieve the desired training.
(b) Provides a record of the basic planning for the course.
(c) Provides communication and agreement between the requesting organization
and the training organization on how the training will be developed.
(d) Authorizes, when approved, development or procurement oftraining and
associated training program, and provides a sound basis for the necessary resource allocations.
(e) Authorizes first course conduct.
(f) Includes a plan for evaluating the effectiveness ofthe training.
(g) Serves as a basis for review of recommended training from a technical and
operational standpoint.
(h) Serves as a baseline for evaluating requirement-to-modify.
(i) Will reflect all changes in cost data, course structure, time allocations, and
performance measures when presented to the AF Training Division for final approval.
c. Training Method Phase. Any combination ofthe basic methods oftraining may be used in the development ofAF training courses. The factors to be considered in detennining which method to use include:
(1) Effectiveness. The foremost consideration in the development ofan AF training course is that it must be effective in accomplishing the objectives established by the TIR.
Continue reading ↓ 120 of 224 passages shown