Radar Vectors
FAA Order Cancelled Issued Oct 30, 2020 AJI-0 263 pages Copy saved Nov 18, 2026

Order JO 3120.4R Air Traffic Technical Training

This order conveys instructions, standards, and guidance for the administration of Air Traffic (AT) technical training.

This document is no longer current. Cancelled by JO 3120.4S. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file (1 of 263 pages). Check the original, as some words may be misread.

JO 3120.4R 1

Distribution: Electronic Initiated By: AJI-0

Air Traffic Organization Policy

ORDER

JO 3120.4R

Effective Date: October 30, 2020

SUBJ: Air Traffic Technical Training

This order prescribes instructions, standards, and guidance for the administration of air traffic technical training. All persons involved in air traffic technical training are required to be familiar with and comply with this order. Facilities must comply with this order within 180 days of the effective date.

Glen A. Martin Vice President, Safety and Technical Training Air Traffic Organization

PAGE INTENTIONALLY LEFT BLANK

10/30/2020 JO 3120.4R

i

TABLE OF CONTENTS

EXPLANATION OF CHANGES … EC-1

CHAPTER 1. GENERAL INFORMATION … 1-1

1. Purpose of This Order … 1-1

2. Audience … 1-1

3. Where Can I Find This Order? … 1-1

4. What This Order Cancels … 1-1

5. Explanation of Changes … 1-1

6. Background … 1-1

7. Location of Air Traffic Control (ATC) Training Courseware … 1-1

8. Word Meanings … 1-1

CHAPTER 2. ROLES AND RESPONSIBILITIES … 2-1

1. ATO Safety and Technical Training (AJI) … 2-1

2. Director of Technical Training (AJI-2) … 2-1

3. Service Units (Air Traffic Services, System Operations) … 2-1

4. FAA Academy … 2-1

5. Facility Personnel … 2-1

CHAPTER 3. TECHNICAL TRAINING … 3-1

1. Identification of Training Requirements … 3-1

2. Changes, Modifications, and Waivers … 3-1

3. Interpretations of FAA Order JO 3120.4 … 3-1

4. New Training Requirement … 3-1

5. Development of Training … 3-1

6. Call for Training … 3-1

7. Educational Opportunities for Non-FAA Personnel … 3-1

8. Radar Approach Control (RAPCON) or Radar Air Traffic Control Facility (RATCF) Training … 3-1

CHAPTER 4. TRAINING REQUIREMENTS FOR AIR TRAFFIC CONTROL SPECIALISTS … 4-1

1. Initial Qualification Training (IQT) … 4-1

2. Field Qualification Training (FQT) … 4-1

3. Enrollment in Terminal Radar Training … 4-2

10/30/2020 JO 3120.4R

ii

4. Weather Observers … 4-2

5. Proficiency Training … 4-3

6. Remedial Training … 4-9

7. Recertification … 4-9

8. Weather Observer Recertification … 4-10

9. Pilot Weather Briefer … 4-10

CHAPTER 5. TRAINING AND PROFICIENCY RECORDS AND REPORTS … 5-1

1. Policy … 5-1

2. Responsibilities … 5-1

3. Training Reports … 5-1

4. Disposition of Records and Reports … 5-2

CHAPTER 6. AIR TRAFFIC CONTROL SPECIALIST ON-THE-JOB TRAINING (OJT) AND POSITION CERTIFICATION … 6-1

1. On-the-Job Training Instructors … 6-1

2. Facility Training Time … 6-2

3. Training Team … 6-3

4. Training Plan … 6-5

5. Training Team Meeting … 6-5

6. Pause of OJT … 6-6

7. Performance Assessment … 6-6

8. Certification Skill Check … 6-7

9. Supplemental OJT Time … 6-8

10. Suspension of OJT … 6-9

11. Training Review Process … 6-9

12. Additional OJT Time … 6-11

CHAPTER 7. AIR TRAFFIC CONTROL SPECIALIST SPECIAL EVENT TOWER TRAINING REQUIREMENTS … 7-1

1. General … 7-1

2. Roles and Responsibilities … 7-1

3. Special Event Temporary Control Tower Specialist Training Requirements … 7-1

4. Special Event Temporary Control Tower Documentation and Record Retention … 7-4

10/30/2020 JO 3120.4R

iii

APPENDIX A. INSTRUCTIONS FOR COMPLETING FAA FORM 3120-1, TRAINING AND PROFICIENCY RECORD … A-1

1. General … A-1

2. Section I. Employment Data … A-2

3. Section II A. Air Traffic Certificates … A-3

4. Section II B. Air Traffic Ratings … A-4

5. Section III. Qualification Training … A-4

6. Section IV. Equipment Certification … A-11

7. Section V. Proficiency (Recurrent, Refresher, Supplemental, Skill Enhancement), and Remedial Training … A-11

8. Section VI. Technical Appraisal … A-14

9. Section VII. Management and Other Training … A-14

10. Section VIII. Liaison Familiarization Travel … A-16

11. Section IX. Certified TRAX Records … A-16

APPENDIX B. INSTRUCTIONS FOR COMPLETING FAA FORM 3120-25, ATCT/ARTCC OJT INSTRUCTION/EVALUATION REPORT … B-1

1. Introduction … B-1

2. Using the Form … B-1

3. Job Subtask Definitions and Performance Indicators Checklist for FAA Form 3120-25 … B-9

APPENDIX C. FLIGHT SERVICE INSTRUCTIONAL PROGRAM GUIDE … C-1

1. Introduction … C-1

2. Air Traffic Basics (Flight Service) … C-1

3. Stage 1: Initial Qualification Training: Initial Flight Service – Alaska … C-3

4. Stage 2: Field Qualification Training … C-6

5. Stage 2 – Area Knowledge … C-7

6. Stage 2 – Flight Data … C-19

7. Stage 2 – NOTAM … C-20

8. Stage 2 – Preflight … C-20

9. Stage 2 – Inflight … C-21

10. Stage 2 – Weather Observer … C-21

10/30/2020 JO 3120.4R

iv

11. Instructions for Completing FAA Form 3120-26, FSS OJT Instruction/Evaluation Report … C-22

12. Job Subtasks and Indicators … C-28

APPENDIX D. TERMINAL INSTRUCTIONAL PROGRAM GUIDE … D-1

1. Introduction … D-1

2. Prerequisite … D-1

3. Initial Qualification Training … D-2

4. Field Qualification Training … D-4

5. Simulation Criteria and Development … D-20

APPENDIX E. EN ROUTE INSTRUCTIONAL PROGRAM GUIDE … E-1

1. Introduction … E-1

2. Transferring Trainees … E-1

3. Prerequisite … E-2

4. Stage 1: … E-2

5. Stages 2 and 3: … E-3

6. Simulation Criteria and Development … E-13

APPENDIX F. OCEANIC INSTRUCTIONAL PROGRAM GUIDE … F-1

1. Introduction … F-1

2. Administration … F-1

3. Prerequisite: … F-1

4. Stage 1: … F-1

5. Stage 2: … F-1

6. Stage 3 … F-5

7. Stage 3A: Manual Non Radar Training (Course 60004720 or current course) … F-6

8. Stage 3B: ATOP Air Traffic Controller Training … F-7

9. Job Subtasks and Indicators Checklist for FAA Form 3120-27, Oceanic OJT Instruction/Evaluation Report … F-26

APPENDIX G. TRAFFIC MANAGEMENT INSTRUCTIONAL PROGRAM GUIDE … G-35

1. Introduction … G-35

2. Stage 1 … G-35

3. Stage 2 … G-3

10/30/2020 JO 3120.4R

v

4. Instructions for Completing FAA Form 3120-32, Traffic Management Coordinator OJT Instruction/Evaluation Report … G-4

5. Traffic Management Job Functions and Indicators for the OJT Instruction/Evaluation Report … G-11

APPENDIX H. RESERVED FOR APPENDIX H: FLIGHT DATA COMMUNICATION SPECIALIST … H-1

APPENDIX I. INSTRUCTIONS FOR COMPLETING FAA FORM 3120-148, OJTI CANDIDATE ABILITIES AND ATTRIBUTES REPORT … I-1

1. Introduction … I-1

2. Using the Form … I-1

3. OJTI Candidate Abilities and Attributes Report Performance Indicators … I-4

APPENDIX J. CONTROLLER-IN-CHARGE INSTRUCTIONAL PROGRAM GUIDE … J-1

1. Introduction … J-1

2. Stage 1 … J-1

3. Stage 2 … J-1

4. Instructions for Completing FAA Form 3120-36, CIC OJT Instruction/Evaluation Report … J-3

5. CIC Job Functions and Indicators for the OJT Instruction/Evaluation Report … J-9

APPENDIX K. OPERATIONS SUPERVISOR INSTRUCTIONAL PROGRAM GUIDE … K-1

1. Introduction … K-1

2. Facility OS Certification … K-1

3. En Route Out-of-Area Training … K-5

4. Instructions for Completing FAA Form 3120-45, Operations Supervisor On-the-Job Training Report … K-6

5. Operations Supervisor On-The-Job Training Report … K-11

APPENDIX L. DEFINITIONS … L-1

APPENDIX M. ACRONYM LIST … M-1

10/30/2020 JO 3120.4R

Page Intentionally Left Blank

JO 3120.4R 1 › Explanation of Changes

10/30/2020 JO 3120.4R

Explanation of Changes

FAA Order JO 3120.4R Explanation of Changes

This revision involves a complete rewrite of the air traffic training directive, with consideration given to recommendations received from a Collaborative Working Group, which included National Air Traffic Controllers Association (NATCA) and management representatives. While there were no changes to the current chapter sequence or chapter titles, this revision changes content throughout the order and appendices, re-sequences existing appendices, adds new appendices, and incorporates editorial and other changes throughout the body of the order and appendices as needed.

This revision:

• Moves some policy information • Changes some policy information • Harmonizes with other Air Traffic Organization (ATO) changes already implemented, replaces “Front Line Manager (FLM)” with “Operations Supervisor (OS)” and addresses roles, responsibilities, and other changes necessitated by the Fiscal Year (FY) 2019 Air Traffic (AT) field re-alignment • Revises appendices to: o Re-sequence for improved usability o Combine guidance about the Flight Services (FS) On-the-Job Training (OJT)

Instruction/Evaluation report and the FS Instructional Program Guide (IPG) into a single appendix o Rename the Oceanic IPG and add oceanic content o Add an OS IPG for certification on a supervisory position o Reserve a placeholder appendix for the Flight Data Specialist IPG o Make other content changes as needed

Other notable changes are listed by chapter or appendix.

Chapter 1, General Information: Minor editorial changes.

Chapter 2, Roles and Responsibilities: Realigns roles and responsibilities to support the FY 2019 ATO field reorganization.

Chapter 3, Technical Training: Minor editorial changes.

Chapter 4, Training Requirements for Air Traffic Control Specialists:

• Moves OS Cross Aisle Training to Appendix K

10/30/2020 JO 3120.4R

• Adds a requirement for all new hires to complete AT Basics and Initial Qualification at the FAA Academy, regardless of previous experience • To increase flexibility, tailor training to facility needs, encourage facilities to spread training throughout the year, and highlight seasonal topics as needed, divides Refresher Training into mandatory requirements and other categories for facilities to choose from. • Splits Skill Enhancement Training (SET) into two categories: o Skill Improvement Training, which can be used as a “batting cage” where

certified controllers can brush up skills (without documentation or negative connotation) or to enable trainees to experience certain operations that are less commonly encountered prior to certification o Skill Development Training, which replaces what was previously called SET and

which can be used for identified performance deficiency • Revises recertification training to more easily follow the timeline/hours needed, and differentiates decertification categories

o Loss of currency decertification o Performance-related decertification (including steps required to re-certify)

Chapter 5, Training and Proficiency Records and Reports: Minor editorial changes.

Chapter 6, Air Traffic Control Specialist OJT and Position Certification:

• Re-sequences content to harmonize with flow of training and On-the-Job Training Instructor (OJTI) selection • Outlines OJTI requirements and the certification and selection process • Outlines training plan purpose and requirements • Outlines training team purpose and duties, including training team meeting requirements • Defined a “pause in training” (which allows OJT to be temporarily halted for extenuating circumstances) and defines requirements for further action • Changes “performance skill check” to “performance assessment” and provided requirements, while distinguishing differences between a “performance assessment” and a “certification skill check” • Redefines “Additional OJT Time” as the time granted by the Air Traffic Manager following a Training Review Board recommendation • Defines “Supplemental OJT Time” • Provides a clear Training Review Process outline

Chapter 7, Air Traffic Control Specialist Special Event Tower Training Requirements: Incorporates minor editorial changes and removes man-made and natural disaster temporary towers training requirements due to implementation issues related to timeliness of deployments.

10/30/2020 JO 3120.4R

Appendices:

• Re-sequences appendices A–L for improved usability • Combines guidance about the FS OJT Instruction/Evaluation report and the FS IPG into a single appendix • Renames the oceanic IPG and adds oceanic content • Adds an OS IPG for certification on a supervisory position • Reserves a placeholder appendix for the Flight Data Specialist IPG • Makes other content changes as needed

Appendix A, FAA Form 3120-1, Training and Proficiency Record: Minor editorial changes.

Appendix B, Instructions for Completing FAA Form 3120-25, ATCT/ARTCC OJT Instruction/Evaluation Report

• Incorporates FAA Form 3120-25 changes published in Change 1 and adds consistency from the start of training in simulation through OJT • Renames Block 9 “Skill Check” to “Performance Assessment” as identified in Chapter 6 • Provides clear guidance on filling out Block 11 • Allows Not Observed (N/O) and Not Applicable (N/A) • Identifies requirements for “SATISFACTORY,” “NEEDS IMPROVEMENT,” “UNSATISFACTORY” • Explains Block 12 Comments “should follow a process that explains what, why, and how” • Separates “Skill Check” into two categories, “Performance Assessment” and “Certification Skill Check”

o Clarifies requirements for a successful Certification Skill Check • Makes “Not Observed” available during OJT, Performance Assessment, and Certification Skill Checks • Revises grading criteria to the following:

Job Task Minus ( - ) Points Deducted per Occurrence

Maximum Deduction per Job Task

Plus ( + ) Points Added per Job Task Separation 16 points No maximum 5 points Weather 8 points No maximum 4 points Coordination 8 points No maximum 4 points Control Judgment 5 points 20 points 2 points Methods and Procedures

5 points 20 points 2 points

Equipment 2 points 10 points 1 point

10/30/2020 JO 3120.4R

Job Task Minus ( - ) Points Deducted per Occurrence

Maximum Deduction per Job Task

Plus ( + ) Points Added per Job Task Communication 2 points 10 points 1 point Other 2 points 10 points 1 point

Appendix C, FS IPG • Adds content to former Appendices C and E and combines them into a single appendix

Appendix D, Terminal IPG

• While classroom remains pass/fail with 70 percent needed to pass, requires skill enhancement for any evaluation score below 70 percent except for final evaluation • Adds Ten, Eleven, Twelve Radar Assessment (TETRA) for trainees reporting to large Terminal Radar Approach Controls (TRACONs) • Adds structure to terminal for minimum and maximum allowable simulation scenarios • Directs simulation pass/fail criteria be based on an average score of all evaluation scenarios administered for the stage • Refers to new grading criteria addressed in Appendix B • Adds Part Task training to Stage 7 – Radar and mandates specific part task training prior to instructional scenarios in scanning, vectoring, speed control, and phraseology • Formatted for consistency with other appendices

Appendix E, En Route IPG

• Combines Stage 2, Radar Flight Data (A-side), and Stage 3, Radar Associate (D-side), so the three stages become:

o Stage 1, Academy o Stage 2, A-side and D-side o Stage 3, Radar • Requires skill enhancement for any simulation evaluation score below 70 percent, except for final evaluation • Establishes a minimum and maximum allowable number of simulation scenarios • Directs that simulation pass/fail criteria be based on the average score for all evaluation scenarios administered for the stage • Refers to new grading criteria addressed in Appendix B • Specifies content that must be covered in Part Task Training during Stage 2, Flight Data/Radar Associate/Nonradar, and Stage 3, Radar/Radar Coordinator • Formatted for consistency with other appendices

10/30/2020 JO 3120.4R

Appendix F, Oceanic IPG

• Renames Oceanic IPG placeholder (formerly ATOP IPG) • Updates content to include addition of new unique FAA Form 3120-27, Oceanic OJT Instruction/Evaluation Report

Appendix G, Traffic Management IPG

• Mandates that Enhanced Traffic Management Coordinator (ETMC), Course 50115, be completed within 18 months of accepting the TMU position • Incorporates editorial changes and updates formatting for consistency with other appendices • Harmonizes changes to FAA Form 3120-32, Traffic Management Coordinator OJT Instruction/Evaluation Report, to be consistent with FAA Form 3120-25 changes

Appendix H, Reserved for Flight Data Communication Specialist (FDCS) IPG (New)

Appendix I, Instructions for Completing FAA Form 3120-148, OJTI Candidate Abilities, and Attributes Report

• Makes instructions more intuitive and user-friendly and defines the purpose and requirements for the form • Better defines Chapter 6 OJTI selection process and updates form

Appendix J, Controller-in-Charge (CIC) IPG

• Deletes FAA Academy Stage 1, since training is accomplished at Field Facility • Combines Stages 1 and 2 into one stage, Electronic Learning • Updates formatting for consistency with other appendices

Appendix K, Operations Supervisor (OS) IPG (New)

• Creates new IPG for supervisor training and certification on a supervisor position • Defines content new OS should receive prior to performing supervisory functions • Provides OJT and certification requirements • Addresses “Out-of-Area” OS training • Requires familiarization in areas as applicable to each facility

Appendix L, Definitions

Appendix M, Acronym List

10/30/2020 JO 3120.4R

Page Intentionally Left Blank

8. Word Meanings. › e. Singular

10/30/2020 JO 3120.4R

Chapter 1. General Information

1. Purpose of This Order. This order conveys instructions, standards, and guidance for the administration of Air Traffic (AT) technical training.

2. Audience. This order applies to all Air Traffic Organization (ATO) personnel and anyone using ATO directives.

3. Where Can I Find This Order? You can find this order on the MyFAA employee website. Select “Orders & Notices” in the “Tools & Resources” drop-down menu. Alternatively, you can use one of these links:

• http://www.faa.gov/regulations_policies/orders_notices/

• https://employees.faa.gov/tools_resources/orders_notices/

• http://faa.gov/air_traffic/publications

4. What This Order Cancels. Federal Aviation Administration (FAA) Order JO 3120.4P, Air Traffic Technical Training, dated October 30, 2015, and all changes to it, are canceled.

5. Explanation of Changes. See page EC-1 in the previous section.

6. Background. FAA Order JO 3120.4R is an update that reflects changes in procedural and technical requirements for AT technical training.

7. Location of Air Traffic Control (ATC) Training Courseware. ATC Training Courseware is located at: http://inet.atctraining.faa.gov/.

8. Word Meanings.

a. “Must” means that an action is mandatory.

b. “Should” means that an action is recommended.

c. “May” means that an action is permitted.

d. “Will” is used only to indicate futurity, not a requirement.

e. Singular words include the plural, and plural words include the singular.

a. Air Traffic Manager (ATM). › (6) FAA Form 3120-1, Training and Proficiency Record, or electronic…

10/30/2020 JO 3120.4R

Chapter 2. Roles and Responsibilities

1. ATO Safety and Technical Training (AJI). AJI is responsible for developing an integrated technical training strategy to guide the overall design, management, and delivery of technical training. AJI also develops policies and standards for ATO technical training.

2. Director of Technical Training (AJI-2). AJI-2 is responsible for program guidance, effectiveness, and technical accuracy; evaluation of AT technical training, coursework/curriculum development, review, and maintenance; and oversight of national and FAA Academy–delivered courses. AJI-2 will solicit facility training best practices and conduct an annual review of this order with stakeholder participation no later than July 1 of each year.

3. Service Units (Air Traffic Services, System Operations). Service units are responsible for implementation, administration, and evaluation of the AT technical training program.

4. FAA Academy. The FAA Academy supports the administration of the national AT Technical Training Program.

5. Facility Personnel. Facility personnel involved in AT technical training must maintain a comprehensive working knowledge of the procedures and guidelines outlined in this order and the applicable national and facility training directives.

a. Air Traffic Manager (ATM). The ATM must ensure that:

(1) Where authorized, a Support Manager is assigned the responsibilities of the Training Administrator (TA). Where no Support Manager is authorized, an individual is designated in writing to serve as the TA. The ATM may serve as the TA without written designation. The TA shall not be a bargaining unit employee.

(2) A training program is established for qualification, proficiency, and recertification. The training program is conducted in accordance with Instructional Program Guides (IPGs) and with national, service area, and facility training directives.

(3) The training program is specified in a facility training directive.

(4) On-the-Job Training (OJT) Checklists for each sector/position are included in the facility training directive.

(5) Individuals who develop/modify lesson plans attend Facility Instructor Training (Course 10501 or current course) prior to developing/modifying a lesson plan. Personnel who conduct classroom training should complete the Facility Instructor Training course as soon as possible.

(6) FAA Form 3120-1, Training and Proficiency Record, or electronic equivalent, is initiated and maintained (see Appendix A).

b. TA. › (1) Administer the facility training program.

10/30/2020 JO 3120.4R

(7) Resource requirements to conduct the facility training program are submitted to the appropriate service center or flight service (FS) information office. The service center may submit resource requirements to the service unit.

(8) An annual calendar year evaluation of the use and effectiveness of the Tower Simulator Systems (TSS) is conducted, when applicable, and a written report is forwarded to the Director of Technical Training no later than March 1 of the following year. The report must be sufficiently detailed to identify the TSS hours used to satisfy proficiency and qualification training requirements. The report may also include recommendations for the use and/or effectiveness of the TSS, facility-specific issues, and initiatives. Input from facilities that have access to the TSS must also be included in the report. A sample report is available from AJI-2.

(9) For OJT and certification:

(a) Individuals entering qualification training receive facility orientation and are briefed on the IPG contents that are pertinent to the current stage of training, the facility training directive, and other associated directives prior to entering training.

(b) OJT is accomplished in accordance with this order.

(c) Training reports are properly completed, maintained, and retained in accordance with agency orders and guidelines.

(d) Facility training time is established, maintained, and updated.

(e) On-the-Job Training Instructors (OJTIs) and management personnel meet qualification criteria contained in this order.

(f) OJTIs are recommended and selected in accordance with Chapter 6.

(g) The training review process is conducted in accordance with this order.

(10) If training is terminated, action is taken in accordance with the applicable Human Resources Policy Manual (HRPM), Collective Bargaining Agreement (CBA), and/or other directives.

(11) National and facility training directives are made available to all facility personnel.

(12) Positions that may be combined during OJT are designated in a facility training directive.

(13) Operations Supervisors (OSs) are certified on the OS position prior to assuming watch supervision duties in accordance with Appendix K.

b. TA. The TA must:

(1) Administer the facility training program.

e. OS/STMC. › (5) Ensure that OJTIs are not assigned other duties during OJT sessions.

10/30/2020 JO 3120.4R

(2) Ensure that the facility training program is planned, conducted, assessed, and revised on a continuous basis.

(3) Administer the training contract at the local level, where applicable.

(4) Ensure that course materials, visual aids, and scenarios are properly developed, labeled, maintained, and updated.

(5) Maintain training documentation.

(6) Ensure that the National Training Database (NTD) is maintained.

(7) Plan and direct the training of personnel involved in the OJT/certification process.

(8) Attend Air Traffic Facility Training Administration (Course 50310002 or current course) as soon as possible after occupying the position.

(9) Review, with the Principal Facility Representative or their designee, facility training in areas including monthly Performance Assessments (PAs), Certification Skill Checks (CSCs), consistency of training, completeness of (or corrections to) OJT documentation, and other relevant training issues.

(10) Collaborate with the Principal Facility Representative (or their designee) on facility training processes.

c. Support Specialist. The Support Specialist assists in the administration of facility training.

d. Operations Manager (OM)/Traffic Management Officer (TMO). The OM/TMO provides oversight and direction to OSs and Supervisory Traffic Management Coordinators (STMCs) to ensure compliance with training directives and goals. When an OS/STMC is training on an operational position in which the OS/STMC will maintain currency, another OS/STMC will be assigned as the Training Team Lead by an OM/TMO and be responsible for conducting all aspects of the training process, including certification.

e. OS/STMC. The OS/STMC must:

(1) Administer OJT.

(2) Establish a Training Team for the trainees they are assigned.

(3) Ensure that Proficiency Training assignments are completed.

(4) Ensure that OJTI qualifications are met.

(5) Ensure that OJTIs are not assigned other duties during OJT sessions.

f. OJTI. › (6) Be responsible for all positions combined during OJT, PAs, or CSCs,…

10/30/2020 JO 3120.4R

(6) Maintain currency and/or familiarization on positions where certifications are conducted.

(7) Conduct PAs and CSCs.

(8) Ensure that OJT is conducted and documented in accordance with this order.

(9) Ensure that position certification documentation is complete and logged on FAA Form 3120-1 or an electronic equivalent.

(10) Ensure that the appropriate OJT instruction/evaluation report, or its electronic equivalent, is signed as required.

(11) Serve as the Training Team Lead.

(12) Make the final determination to amend a training plan.

(13) Make the final determination regarding certification.

(14) Make the determination regarding suspension of OJT.

(15) Address reported extenuating circumstances that may impede the training progress of the trainee.

(16) Ensure that OJT is productive and appropriate for the experience level of the trainee. The OS/STMC will ensure that all OJT is conducted in a positive teaching, learning, and coaching atmosphere.

f. OJTI. The OJTI must:

(1) Teach, instruct, coach, provide guidance on control judgment, and demonstrate application of various techniques for ATC procedures. OJT instruction must be based on applicable national and local directives.

(2) Verbally provide performance feedback to a trainee as soon as possible after each OJT session, emphasizing both positive observations and areas needing improvement.

(3) Document and debrief OJT using the appropriate OJT instruction/evaluation report, or its electronic equivalent, by the end of the shift on which the OJT occurred.

(4) Complete at least one OJT report for each position/combined position. Each OJTI that conducts OJT during a shift must complete an OJT report. An OJTI may combine reports if they train the same trainee on the same position more than once in a day.

(5) Be plugged in to the same control position as the trainee when OJT is conducted.

(6) Be responsible for all positions combined during OJT, PAs, or CSCs, even if the trainee is certified on one or more of the positions.

h. Principal Facility Representative. › (4) Help ensure the integrity of the facility training process.

10/30/2020 JO 3120.4R

(7) Not be a management official.

g. Trainee. The term “trainee” used throughout this order refers to a developmental, Certified Professional Controller-in-Training (CPC-IT), Traffic Management Coordinator-in-Training (TMC-IT), Operations Supervisor in-Training (OS-IT), National Traffic Management Specialist-in-Training (NTMS-IT), or Full Performance Level-in-Training (FPL-IT). The term Operations Supervisor-in-Training (OS-IT) refers to an OS training on positions for which they will maintain currency. The acronym OS-IT in this order does not refer to an OS receiving training under Appendix K. The trainee must:

(1) Be physically and mentally prepared to receive OJT.

(2) Exercise initiative and properly prepare to ensure satisfactory training progress.

(3) Be an active participant in their training to achieve certification.

(4) Review, discuss, and make suggestions to enhance training with the other members of the Training Team.

(5) Advise the Training Team if an aspect of training is unclear or not understood.

(6) Review, discuss, and sign the appropriate OJT instruction/evaluation report or its electronic equivalent.

(7) Immediately advise an OS/STMC of extenuating circumstances that might impact training progress.

(8) Engage in OJT only on positions that have been assigned.

(9) Be receptive to training performance feedback.

(10) Document OJT/On-the-Job Familiarization (OJF) times on FAA Form 3120-25, ATCT/ARTCC OJTI Instruction/Evaluation Report; FAA Form 3120-26, FSS OJT Instruction/Evaluation Report; FAA Form 3120-27, Oceanic OJT Instruction/Evaluation Report; FAA Form 3120-32, Traffic Management Coordinator OJT Instruction/Evaluation Report; FAA Form 3120-36, Controller-in-Charge OJT Instruction/Evaluation Report; or the electronic equivalent of one of these.

h. Principal Facility Representative. The Principal Facility Representative (or their designee) must:

(1) Collaborate with the TA on facility training processes.

(2) Review facility training documentation.

(3) Share input received from Training Team members with the TA.

(4) Help ensure the integrity of the facility training process.

10/30/2020 JO 3120.4R

(5) Conduct regular meetings with the TA, or their designee, to review facility training in areas including monthly PAs, CSCs, consistency of training, completeness or corrections of OJT documentation, and other relevant training issues.

Chapter 3. Technical Training › 8. Radar Approach Control (RAPCON) or Radar Air Traffic Control…

10/30/2020 JO 3120.4R

Chapter 3. Technical Training

1. Identification of Training Requirements. National technical training requirements are established at the Headquarters (HQ) Service Unit Level: Air Traffic Services, System Operations, Flight Service Stations (FSSs), and the David J. Hurley Air Traffic Control System Command Center (ATCSCC). Technical training requirements are developed and implemented in collaboration with AJI.

2. Changes, Modifications, and Waivers. Changes, modifications, and waivers to national training courses or this order must be submitted in writing to the Director of Technical Training through the applicable District Office and Service Center. If the request is coming from a Non- Field Facility, it should be routed through the applicable HQ Service Unit. Waiver renewal requests must be submitted at least 60 days prior to the expiration date. Unless otherwise specified, waivers are valid for two years and will be signed by the Vice President of Safety and Technical Training.

NOTE: Requests may be submitted electronically with electronic signatures.

3. Interpretations of FAA Order JO 3120.4. All requests for interpretations of this order must be forwarded to AJI-2 through the applicable District Office and Service Center.

NOTE: Requests may be submitted electronically with electronic signatures.

4. New Training Requirement. Requests for the development of new national courses/curricula must be submitted to AJI-2 via [email protected].

5. Development of Training. AJI-2 will take action to establish and maintain training programs for identified requirements using an Instructional Systems Design (ISD) process. Briefing items developed only for controller information/awareness are excluded from ISD requirements.

6. Call for Training. The ATO must identify organizational training requirements for inclusion in the annual call for training.

7. Educational Opportunities for Non-FAA Personnel. In accordance with national policy, orientation, familiarization, shadowing, or other educational opportunities may be provided at FAA facilities. Educational opportunities for individuals not employed by the FAA will be provided in accordance with FAA agreements and/or memoranda of understanding.

NOTE: The provisions of FAA Order JO 3120.4 may or may not apply to federal or non-federal contract towers and FSSs. Training at FAA contract towers and FSSs must be conducted in accordance with each contractor’s FAA-approved training plan.

8. Radar Approach Control (RAPCON) or Radar Air Traffic Control Facility (RATCF) Training. Military personnel assigned to jointly staffed approach control facilities must be provided training on radar control positions under FAA supervision.

8. Radar Approach Control (RAPCON) or Radar Air Traffic Control… › b. Training must be documented

10/30/2020 JO 3120.4R

a. To participate in radar control training, military personnel must possess an appropriate certificate (AC Form 8060-1, Control Tower Operator (CTO) Certificate; FAA Form 7220-1, Air Traffic Control Specialist (ATCS) Certificate; or AC Form 8080-2, Airman Written Exam Report). Military personnel must meet FAA certification and currency requirements.

b. Training must be documented on FAA Form 3120-1 or an electronic equivalent (see Appendix A). All military participants who have successfully completed the training program must receive appropriate FAA certificates and ratings to be qualified for assignment to control positions under general supervision.

2. Field Qualification Training (FQT). › c. Flight Service:

10/30/2020 JO 3120.4R

Chapter 4. Training Requirements for Air Traffic Control Specialists

1. Initial Qualification Training (IQT). The newly hired trainee must successfully complete IQT for the assigned option. Air Traffic Basics (Courses 50043001, 50143, and 50243, or current courses) are prerequisites to field qualification training unless the trainee was hired under a previous experience vacancy announcement or is a graduate of an FAA-approved Collegiate Training Initiative (CTI) program who has elected to opt out of AT Basics training.

2. Field Qualification Training (FQT). Trainees must receive FQT at Field Facilities as outlined in this order and in their facility training directive. FQT must be conducted in accordance with the IPGs contained in this order.

a. CPCs who are:

(1) Transferring from the En Route option to the Terminal option or from the Terminal option to the En Route option need not attend IQT for the new option or facility type at the FAA Academy. The specialist will be entered into the appropriate stage of field training as determined by the receiving facility TA.

(2) Transferring from the Tower-only option to a combined Tower/Terminal Radar Approach Control (TRACON) or TRACON-only option are required to complete Terminal Basic Radar Training (Course 50034 or current course).

(3) Transferring from En Route, Tower, combined Tower/TRACON, or a TRACON level 8 or below to a combined Tower/TRACON or a TRACON level 9–12 are required to complete TRACON Skill Enhancement Workshop (TSEW) (Course 50056002 or current course).

(4) Transferring from a Tower to a Tower, from a combined Tower/TRACON to another combined facility, or from a TRACON to another TRACON will be entered into the appropriate stage of field training as determined by the TA.

b. Trainees: En Route trainees changing to the Terminal option, Terminal trainees changing to the En Route option, and Terminal trainees changing to a different facility type must attend IQT for the new option or facility type. Trainees who have previously completed IQT are not subject to the pass/fail requirement. Upon completion of the course, facilities will receive all training, skill checks, and training forms for their course attendees.

c. Flight Service:

(1) En Route and Terminal controllers and Traffic Management Coordinators (TMCs) who are changing to the FS option and have not previously completed the FS initial training must enter FS training at the appropriate training facility.

(2) FSS specialists changing to the En Route or Terminal option must complete IQT identified for the option at the FAA Academy. An FSS specialist who has successfully

4. Weather Observers. › b. ATCS personnel at facilities required to augment an Automated…

10/30/2020 JO 3120.4R

completed either Terminal or En Route IQT at the FAA Academy must be entered into the appropriate stage of the training program as determined by the receiving facility TA.

3. Enrollment in Terminal Radar Training.

a. Terminal Basic Radar Training (Course 50034001 or current course). Enrollment is limited to trainees assigned to, or selected for, TRACON facilities, who have not been radarcertified at the Certified Professional Controller (CPC) level at an FAA facility. Trainees at visual flight rules (VFR) towers are not eligible to attend Course 50034001. Trainees at towers that meet the criteria to provide radar services must complete the Terminal Radar Qualification Examination and the appropriate portions of Stage 7, Radar Control Training (see Appendix D, Terminal IPG) as part of local control (LC) certification.

b. TRACON Skill Enhancement Workshop (TSEW) (Course 50056002 or current course). Enrollment is limited to trainees assigned to, or selected for, TRACON facilities at levels 9–12. This workshop provides trainees who have successfully completed the Terminal Basic Radar Training (RTF) course with additional practice performing desired controller skill sets including vectoring, understanding aircraft performance characteristics, issuing clearances, scanning, projecting, maintaining positive control, ensuring separation standards, managing speed control, sequencing, managing compression, and performing keyboard entries. These skills will be reinforced through classroom, discussion, and high-fidelity simulation exercises using TRACON scenarios with traffic complexity levels of ten and above.

c. Ten, Eleven, Twelve Radar Assessment (TETRA) (Course 50070001). Enrollment is limited to trainees who will report to large TRACON facilities. This course provides highfidelity training in an environment that simulates the complexity of TRACON airspace and procedures.

4. Weather Observers.

a. ATCSs at facilities that have weather observer responsibilities must:

(1) Successfully complete Limited Aviation Weather Observers (LAWRS) Course (Course 60004715 or current course) and pass the Certification Examination with a score of at least 70 percent.

(2) Receive at least five hours of OJT that includes operation of the weather-observing equipment used at the facility and complete a minimum of five observations.

(3) Have completed one official or practice observation recorded on a National Weather Service Form MF1M-10C, Surface Weather Observation, within the past 60 days in order to retain certification.

b. ATCS personnel at facilities required to augment an Automated Surface Observing System (ASOS) or an Automated Weather Sensor System (AWSS) must complete the following. (In order to retain this certification, the ATCS must have been logged on to the position responsible for ASOS/AWSS for at least one hour or have completed one manual official or

(1) All mandatory topics listed below: › (a) Lost aircraft orientation

10/30/2020 JO 3120.4R

practice observation recorded on National Weather Service Form MF1M-10C within the past 60 days.)

(1) Weather observer training and certification.

(2) Automated Surface Observation System (ASOS) (Course 57005) or Automated Weather Sensors System (AWSS) (Course 57089). (OJT is required on the actual ASOS/AWSS equipment prior to completion of training.)

(a) If meeting the specific needs of the facility requires completing only a portion of Courses 57005 or 57089, only the portion actually completed must be recorded on FAA Form 3120-1 or electronic equivalent.

5. Proficiency Training. Proficiency Training is conducted to maintain and update the knowledge and skills necessary to apply ATC procedures in a safe and efficient manner. Proficiency Training includes Recurrent Training, Refresher Training, Supplemental Training, and Skill Enhancement Training (SET). Training needs will differ from facility to facility, and training should be tailored to meet identified requirements. All Proficiency Training must be documented on the employee’s FAA Form 3120-1 or electronic equivalent.

a. Recurrent Training. Recurrent Training is collaboratively developed and delivered national safety training. This training is delivered via electronic means, instructor-led presentations, or any combination thereof. Recurrent Training is intended to increase air traffic controller proficiency, enhance awareness of human factors affecting aviation, and promote behaviors essential for the identification, mitigation, and/or management of risk. Recurrent Training consists of 16 hours of training, conveyed in 8-hour sessions, conducted twice per year. Content need not be duplicated in facility Refresher Training if covered in the Recurrent Training curriculum within the current calendar year. When Recurrent Training is prescribed, AJI must provide instructions for its applicability and specific instructions for documentation in FAA Form 3120-1 or the electronic equivalent.

b. Refresher Training. Refresher Training is conducted to maintain and update previously learned knowledge and skills. All operational personnel must complete refresher training. Each facility must develop a written annual Refresher Training plan and conduct the planned training throughout the calendar year. Refresher Training need not be delivered all at once. Refresher Training topics and delivery methods (e.g., electronic learning, classroom, simulation) will be developed by the TA and the Local Safety Council (LSC) or locally developed by another collaborative group. Facilities with access to simulation capabilities must identify which topics will be covered in simulation training from the annual refresher training plan. Simulation training must consist of a cumulative total of not less than two hours per calendar year. Facilities may design their refresher training program specifically for operational areas within the facility that perform different types of operations. The list below is not all-inclusive, and facilities may add other topics in order to meet their needs. An annual Refresher Training plan must consist of:

(1) All mandatory topics listed below:

(a) Lost aircraft orientation

10/30/2020 JO 3120.4R

(b) Recovery in ATC operations

(c) Safety alerts (required in simulation training)

(d) Fatigue awareness

(e) Contingency plans

(f) Oceanic procedures, where applicable

(g) OS/Controller-in-Charge (CIC) Training. OSs and CICs must receive a minimum of one hour of training on subjects including but not limited to the handling of accidents, reporting incidents, unusual situations, upward reporting, Domestic Events Network (DEN) notification, and emergency events.

(c) Equipment: › ii. Primary backup mode

(2) At least two items from each topic below with a focus on items indicated by a review of local quality control data:

(a) Emergencies:

i. Hijacking

ii. DEN/VIP Movements

iii. Facility evacuation

iv. VFR aircraft encountering Instrument Meteorological Conditions (IMC)

(b) Safety:

i. Minimum Safe Altitude Warning (MSAW)

ii. Runway incursions

iii. Go-arounds and missed approaches

iv. Weather

v. Pilot Weather Report (PIREP) solicitation/dissemination

vi. Traffic Alert and Collision Avoidance System (TCAS)

vii. Traffic Advisories

(c) Equipment:

i. Nonradar

ii. Primary backup mode

(e) Basics: › vii. Letters of Agreement (LOAs)/Letters of Procedure (LOPs)/Directives

10/30/2020 JO 3120.4R

iii. En Route Decision Support Tool (EDST)

iv. Backup equipment

v. Airport Surface Detection Equipment (ASDE)/Airport Surface Surveillance Capability (ASSC)

(d) Procedures/Operations:

i. Airspace intruder

ii. Special flight handling

iii. Tower visibility

iv. Local Airport De-icing Plan (LADP)

v. Bird activity

vi. Special Activity Airspace (SAA)

vii. Line Up and Wait (LUAW)

viii. Military operations

ix. Limited Aviation Weather Reporting Stations (LAWRS)

x. Land and Hold Short Operations (LAHSO)

xi. Opposite Direction Operations (ODO)

xii. Time-Based Flow Management (TBFM)

(e) Basics:

i. Phraseology

ii. Vectoring

iii. Speed Control

iv. Clearances

v. Coordination

vi. Separation minima

vii. Letters of Agreement (LOAs)/Letters of Procedure (LOPs)/Directives

(1) Skill Improvement Training. › (b) SIT may be assigned to a trainee for a position on which they are…

10/30/2020 JO 3120.4R

viii. Control judgment

ix. VFR services

(3) At least one topic related to professional skills:

(a) Teamwork

(b) Communication

(c) Leadership

(d) Self-motivation

(e) Professionalism

(f) Problem solving

(g) OJTI (e.g., techniques, best practices, coaching, review, completion of the appropriate OJT instruction/evaluation reports)

c. Supplemental Training. All operational personnel must complete supplemental training prior to the use of new/revised procedures, regulations, or equipment. The TA must review all supplemental training and update local training materials as appropriate.

d. Skill Enhancement Training. The purpose of SET is to reinforce, enhance or improve skills for an individual. There are two types of SET: Skill Improvement Training (SIT) and Skill Development Training (SDT). SET is evaluated for its effectiveness, but the trainee’s performance is not graded according to the criteria defined in the applicable appendix.

(1) Skill Improvement Training. The purpose of SIT is to provide an individual with the opportunity to participate in training that will enrich their ATC skills, abilities, and knowledge through simulation, electronic learning, observation, etc. SIT is not used to correct a specific performance deficiency.

(a) SIT may be requested by an individual for a position on which they are certified. SIT is used to reinforce skills for seldom-used AT operations or any job task/job subtask from Appendix B. The individual will discuss with their supervisor the task/operation they want to reinforce. The supervisor will coordinate the training to be provided with the TA. The TA will develop training tailored to the request. If simulation is requested, the TA will schedule any simulation scenarios subject to availability. In the scheduling of SIT, SDT shall not be delayed. SIT requested by an individual under this subparagraph is solely to reinforce an individual’s skills and therefore must not be documented.

(b) SIT may be assigned to a trainee for a position on which they are receiving OJT. SIT may be assigned in order to enhance specific skills, abilities, or knowledge to assist in their success in the training program. The trainee’s supervisor, in consultation with the training team, should identify and assign SIT suitable for enhancing the identified skill. The supervisor will

Supervisors are encouraged to develop training that employs creative… ›  The expected performance outcome.

10/30/2020 JO 3120.4R

coordinate the training to be provided with the TA. The TA will develop training tailored to the request. If simulation is requested, the TA will schedule simulation scenarios, subject to availability. When SIT is assigned under this paragraph, the trainee’s supervisor will document in writing, via memorandum to the trainee, the specific skills to be enhanced using the job task/job subtask from Appendix B. At the conclusion of SIT, a Training Team meeting must be conducted to document the suitability and effectiveness of the training.

(c) Written SIT assignments will specify goals, duration, and methods of training (e.g., simulation, electronic learning, classroom, self study, observation). OJT does not need to be paused during SIT. Training Team members should participate in conducting SIT. SIT assigned to a trainee must be documented on FAA Form 3120-1 Section V, or the electronic equivalent. SIT must be documented on FAA Form 3120-25, -26, -27, -32, -36, or the electronic equivalent of one of these, for each session. At the conclusion of SIT, a Training Team meeting must be conducted to document the suitability and effectiveness of the training.

(2) Skill Development Training. The purpose of SDT is to improve a specific performance deficiency for an individual who is certified or receiving OJT on a position. SDT is different from SIT in that SDT is conducted when a performance deficiency is identified. SDT begins from an individual’s current performance level and must employ teaching methods using a building block approach. SDT must be tailored to meet the individual’s needs using a part task method, which teaches one or a limited number of skills at a time. In accordance with FAA Order JO 3400.20, Individual Performance Management (IPM) for Operational Personnel, SDT will be based on an ongoing assessment of performance and should not be based on a single snapshot, event, or reported occurrence.

Supervisors are encouraged to develop training that employs creative and innovative techniques not limited to methods previously used. Training Team members should participate in development and delivery of SDT. The supervisor will coordinate the training to be provided with the TA. SDT assigned to a trainee must be documented on FAA Form 3120-1, Section V, or the electronic equivalent. SDT must be documented on FAA Form 3120-25, -26, -27, -32, -36, or the electronic equivalent of one of these, for each session.

(a) SDT assigned to an individual certified on a position.

i. The supervisor is responsible for documenting, in writing to the individual, the following elements of SDT:

• The specific performance deficiency (using the job tasks/job subtasks listed in the applicable appendix).

• The teaching methods to be used (e.g., simulation, classroom, electronic learning, Part Task Training (PTT), self study, observation).

• The duration and quantity of simulation, classroom, electronic learning, PTT, self study, observation, etc.

• The expected performance outcome.

(g) After additional SDT has been completed and has not effectively… › ii. Suspend training.

10/30/2020 JO 3120.4R

ii. If the SDT does not produce the expected outcomes and does not correct the identified performance deficiency, the following options are available to the supervisor:

• Evaluate the effectiveness and assign additional SDT, if applicable.

• Further action in accordance with the FAA’s Performance Management System and the CBA, if applicable.

(b) SDT may be assigned to a trainee for a position on which they are receiving OJT. The trainee’s supervisor must assign SDT when a repeated performance deficiency is identified and documented through review of the trainee’s PAs, FAA Form 3120-25, -26, -27, - 32, or -36, Training Team meeting discussions, observed performance, or instructor recommendations. The Trainee’s supervisor will develop SDT in consultation with the Training Team. Since the purpose of SDT is to focus on improving performance, OJT must be paused while SDT is conducted.

(c) The supervisor is responsible for documenting, in writing to the trainee, the following elements of SDT:

i. The specific performance deficiency (using the job tasks/job subtasks listed in the applicable appendix).

ii. The teaching methods to be used (e.g., simulation, classroom, electronic learning, PTT, self study, observation).

iii. The duration and quantity of simulation, classroom, electronic learning, PTT, self study, observation, etc.

iv. The expected performance outcome.

v. The method used to evaluate whether the outcome has been met.

(d) At the conclusion of SDT, a Training Team meeting must be conducted to document the effectiveness of the training.

(e) If the SDT was effective in correcting the performance deficiency, the trainee must resume OJT.

(f) If the SDT was not effective in correcting the performance deficiency, additional SDT must be assigned to the trainee in consultation with the Training Team.

(g) After additional SDT has been completed and has not effectively corrected the performance deficiency, the following options are available to the supervisor:

i. Evaluate the effectiveness and assign additional SDT, if applicable.

ii. Suspend training.

a. Loss of Currency. › (1) Within 30 days.

10/30/2020 JO 3120.4R

(3) SET resulting from an Event Review Committee (ERC) recommendation. The ERC will recommend the SET that will be conducted. The facility must report completion of SET to the ERC. Record ERC-assigned SET as Type 4 training on FAA Form 3120-1 or the electronic equivalent under Major Subject Areas as “ATSAP.” If FAA Form 3120-25, -26, -27, -32, or -36 (or an electronic equivalent such as Comprehensive Electronic Data Analysis and Reporting (CEDAR)) are used to document the Air Traffic Safety Action Program (ATSAP) SET, those records must be destroyed or deleted once SET is successfully completed. Upon completion of the SET, the ERC will determine whether the SET was completed satisfactorily.

6. Remedial Training. The purpose of Remedial Training is to correct a documented performance deficiency that results in decertification. Remedial Training does not apply in situations where a person has lost currency for reasons unrelated to performance. The OS/STMC will document in writing the specific performance deficiency to be improved using the job tasks/job subtasks listed in the applicable appendix, in accordance with applicable agency directives and the applicable CBA. OJT times must not exceed 100 percent of the Target Time established for a trainee without previous experience.

a. The OS/STMC is responsible for identifying the training to be administered. Training must be tailored to meet the individual’s needs. Methods may include, but are not limited to, electronic learning, classroom, PTT, simulation, and OJT.

b. Training provided as a result of performance-related decertification must be documented as Remedial Training on FAA Form 3120-25, -26, -27, -32, or -36. Remedial Training must be recorded on FAA Form 3120-1, Section V, or the electronic equivalent and logged under Proficiency Training in TRAX. Documentation of Remedial Training in Section V must not reference a reported occurrence.

7. Recertification. The purpose of recertification is to recertify an individual on a position when a loss of currency or a performance-related decertification is involved. FAA Form 3120-25, -32, or -36 must be used to document all OJT and recertification skill checks (see Figure 4-1).

a. Loss of Currency. To be recertified, the individual must demonstrate, under direct monitoring, the ability to satisfactorily perform operational duties during normal workload conditions. Recertification may be accomplished on an individual position or by a single action covering multiple positions at the discretion of the ATM or their designee. If classroom, simulation, or OJT is conducted prior to recertification, a training plan will be developed in accordance with this order. Recertification must be recorded on FAA Form 3120-1, Section III, or the electronic equivalent. When conducting recertification following a loss of currency, count the number of days from the date currency was lost. Administer training accordingly as described below. If recertification is not achieved, the ATM or their designee must take action in accordance with Agency guidelines.

(1) Within 30 days. At the discretion of an OS/STMC, an individual may be recertified without training. If the individual does not achieve recertification, then training must be assigned under subparagraph (2) below.

Chapter 4. Training Requirements for Air Traffic Control Specialists › 9. Pilot Weather Briefer.

10/30/2020 JO 3120.4R

(2) More than 30 days but fewer than 120 days. The individual must receive OJT of up to 50 percent of Target Time established for a trainee without previous experience. Training may include electronic learning, classroom, PTT, or simulation at the discretion of the TA.

(3) 120 days or more. The individual must receive OJT of up to 100 percent of the Target Time established for a trainee without previous experience. The individual must receive classroom and simulation training. The amount of classroom and simulation, where available, will be determined by the TA.

(4) If the individual fails to recertify under subparagraph (2) or (3) above, refer to the applicable CBA.

b. Performance-Related Decertification. Remedial training must be conducted in accordance with this order. During a recertification skill check, the individual must demonstrate, under direct monitoring, the ability to satisfactorily perform operational duties during normal workload conditions. Recertification may be accomplished on an individual position or by a single action covering multiple positions at the discretion of the ATM or their designee. Recertification following remedial training must be entered on FAA Form 3120-1, Section VI, or the electronic equivalent. If the individual fails to recertify following a performance-related decertification, refer to the applicable CBA.

8. Weather Observer Recertification. To recertify as a weather observer, personnel who have not taken an observation within 60 days must demonstrate proficiency to an OS or their designee. Personnel who have not taken an observation within 90 days must retake the weather observer certification exam. Recertification due to a performance deficiency must be entered on FAA Form 3120-1, Section VI, or the electronic equivalent. All other recertification must be recorded on FAA Form 3120-1, Section III, or the electronic equivalent. Recertification must be documented on FAA Form 3120-25 or FAA Form 3120-26, as applicable.

9. Pilot Weather Briefer. Individuals certified as pilot weather briefers must comply with the proficiency check requirements established by the FAA and outlined in FAA Order JO 7220.4, FAA Certification of Pilot Weather Briefing. FAA Form 3120-26 must be used to document recertification.

A

RECERTIFICATION

Due To:

Loss of Currency

8

31-120 Days

C

10/30/2020

Performance Deficiency

Remedial Training

CBA Article 80

>120 Days

≤ 30 Days

Certify Not Certify

Go to B

4-11

A—An individual may be recertified without training

B—TA must assign up to 50% of target time to train

C—An individual must receive training up to 100% of target time

Certify Not Certify Certify

CBA

Article 80

Certify Not Certify Certify

CBA

Article 20

Certify Certify Address In Accordance with the Collective Bargaining Agreement and Applicable Agency Directives

Not Certify

CBA

Article 80

Not Certify

CBA

Article 20

Address In Accordance with the Collective Bargaining Agreement and Applicable Agency Directives

Certify Not Certify

CBA

Article 20 Figure 4-1

Certify Address In Accordance with the Collective Bargaining Agreement and Applicable Agency Directives

JO 3120.4R

Chapter 5. Training and Proficiency Records and Reports › 3. Training Reports.

10/30/2020 JO 3120.4R

Chapter 5. Training and Proficiency Records and Reports

1. Policy.

a. FAA Form 3120-1 or the electronic equivalent must be prepared and maintained for each ATCS as part of the employee’s permanent training record. This form must be used to record results and completion of requirements for Qualification, Proficiency, Remedial, and other agency-approved training. Guidance for making entries on FAA Form 3120-1 or the electronic equivalent is in Appendix A. Employment data as well as AT certificates and ratings must also be documented on this form. Use of FAA Form 3120-1 or the electronic equivalent is governed by the provisions of the Privacy Act of 1974.

b. Entries in FAA Form 3120-1, Sections V and VIII, or the electronic equivalent may be disposed of five years after the training occurs.

c. A facility may maintain sections of FAA Form 3120-1 outside the orange jacket of the form. When sections are kept outside the orange jacket, precautions must be taken to ensure that the provisions of the Privacy Act and other record-maintenance requirements are met. Precautions must be taken to ensure that there is no mixing or confusing of records.

d. Documentation of training received should be the same at temporary and permanent AT facilities, with the following necessary variations at the temporary facility:

(1) No entries are necessary in Sections I and IIA.

(2) Section IIB entries must include “(TEMPORARY)” after the name of the facility.

(3) Section III entries should correctly reflect that the training was completed either in separate development stages/positions or as a single action (all positions combined).

(4) If no three-character identification is assigned to the facility, enter the full name in the Facility Identification (FAC IDENT) column.

(5) Make entries in Sections IV through VIII only if appropriate to the operations.

2. Responsibilities.

a. The ATM or their designee must initiate and maintain the employee’s FAA Form 3120-1 or the electronic equivalent.

b. FAA Academy, Air Traffic Division (AMA-500), must operate as a Field Facility for the purposes of this directive with respect to management and administration of FAA Form 3120-1 or the electronic equivalent.

3. Training Reports. A training report must be completed on the appropriate FAA OJT Instruction/Evaluation form for OJT sessions and simulation scenarios. Reports reflecting certifications must contain the signature of the certifying official. Examples of the FAA forms

4. Disposition of Records and Reports. › f. Record ERC-assigned SET as Type 4 training on FAA Form 3120-1 or the…

10/30/2020 JO 3120.4R

and specific instructions regarding completion of training reports are in the appendices of this order.

4. Disposition of Records and Reports.

a. The FAA OJT Instruction/Evaluation Forms and other training documentation (e.g., Training Plans, Training Team Meetings, FAA Forms 3120-25, -26, -27, -32, or -36) reflecting position certification, re-certification prior to being facility rated, and all written and performance-based examinations required by the IPG must be retained for 12 months after certification on each position/sector. The employee will be notified in writing or electronically through Training Enterprise Application and Management (TEAM) prior to the destruction of the aforementioned documents. If the employee fails to make a request for electronic copies of the documents within seven days of acknowledging the notification, the documents will be disposed of.

b. In the event of a termination of training, the documents identified in paragraph 4a must be retained for 12 months. After the appropriate time period has elapsed, they must be handled in accordance with national directives and FAA Order JO 1350.14B, Records Management, or current order.

c. FAA OJT Instruction/Evaluation Reports used for air traffic control personnel recertification must be disposed of after the recertification has been documented with all appropriate signatures on the employee’s FAA Form 3120-1 or the electronic equivalent.

d. Upon termination of employment, the employee’s FAA Form 3120-1 or the electronic equivalent, excluding training failures, must be forwarded to the appropriate Human Resource Management office.

e. FAA Headquarters or service area offices may require retention of records beyond the periods specified above because of special circumstances (e.g., litigation, appeals). In these cases, facilities must comply with these instructions.

f. Record ERC-assigned SET as Type 4 training on FAA Form 3120-1 or the electronic equivalent under Major Subject Areas as “ATSAP.” If FAA Form 3120-25, -26, -27, -32, -36, or an electronic equivalent such as CEDAR, is used to document ATSAP SET, those records must be destroyed or deleted once SET is successfully completed.

b. OJTI Selection Process. › (2) The ATM or their designee will designate a Panel to review the…

10/30/2020 JO 3120.4R

Chapter 6. Air Traffic Control Specialist On-the-Job Training (OJT) and Position

Certification

1. On-the-Job Training Instructors. An OJTI is an essential element of the Training Team and crucial to a trainee’s success. The OJTI’s function is one of teacher and coach. CPCs who certify as OJTIs are selected for their skills and abilities and are highly respected members of the workforce.

a. OJTI Eligibility Requirements. To be selected as an OJTI, an individual must not be a management official and must meet the following requirements:

(1) Must be certified at the CPC/TMC/FPL level on the positions involved at a minimum of 12 months, unless any of the following conditions apply:

(a) At ATC-8 or below, facilities having a ratio of greater than 35 percent trainee to CPC, the ATM (or their designee) may select OJTIs for Flight Data (FD), Clearance Delivery (CD), and Ground Control (GC) once the individuals have been certified on the position for six months.

(b) Transferring trainees may conduct OJT on a position if they have previous OJTI experience on the same type of position and have worked the position for a minimum of three months after certification. The three-month requirement may be waived at the ATM’s (or their designee’s) discretion for non-control positions.

(c) OJTIs from facilities directly involved in Section 804 facility realignments are exempt for one year after cutover provided they are designated as an OJTI on higher level airspace no later than the cutover date. They will complete supplemental classroom training and the number of position hours determined by the Article 76 Training and Transition Plan (but in no case less than 20 hours). Position hours must include some moderate or greater traffic and unusual traffic situations. (Some hours may be accomplished via simulation.)

b. OJTI Selection Process. The following selection process must be completed prior to OJTI certification.

(1) The employee must be recommended to the facility OJTI Panel by the employee’s OS/STMC after completion of FAA Form 3120-148, OJTI Candidate Abilities and Attributes Report (Appendix I). The OS/STMC must make a decision to RECOMMEND or NOT RECOMMEND the OJTI candidate. When the OS/STMC recommends the candidate, they will forward FAA Form 3120-148 to the facility OJTI Panel. If the OS/STMC does not recommend the OJTI candidate, then the OS/STMC will reply in writing to the candidate, giving the reasons for the NOT RECOMMEND decision.

(2) The ATM or their designee will designate a Panel to review the recommended OJTI candidates. The Panel is composed of a minimum of two people, including participants identified in current CBAs. The Panel must consider, at a minimum, the content of FAA Form 3120-148, the nominee’s performance, human relation skills, motivation, attitude, and objectivity. The Panel must forward a concur or nonconcur determination regarding the

2. Facility Training Time. › a. Facility training time must be categorized based on the level and…

10/30/2020 JO 3120.4R

selection of the recommended OJTI candidate to the ATM or their designee. If the OJTI Panel does not concur, the OJTI Panel will provide reasons for their nonconcurrence in writing to the candidate’s OS/STMC.

(3) The ATM or their designee must notify the candidate of their selection or nonselection in writing.

(4) The candidate must complete Basic On-the-Job Instructors’ (OJTI) Techniques Course (Course 55049001 or current course) after being selected as an OJTI. Course completion must be documented on FAA Form 3120-1, Section VII, or the electronic equivalent.

c. OJTI Certification. Except during the first OJT session when OJTI certification is conducted, the following process must be completed prior to an OJTI candidate conducting OJT.

(1) The candidate must receive an OJTI certification (see Figure I-2, FAA Form 3120­151, On-the-Job Instructor Evaluation/Certification). To be certified as an OJTI, the candidate must be directly monitored by their OS/STMC for performance, including the debrief and documentation of the OJT session. In facilities where simulation capabilities exist, the first OJT session may be performed using a simulation scenario. The OS/STMC must debrief the candidate on the observed OJTI activities.

(2) The OS/STMC must document the certification. Certification must also be entered on the candidate’s FAA Form 3120-1, Section III, or the electronic equivalent. OJTI certification is only applicable for the facility/area in which the certification was conducted. If an OJTI transfers to another facility/area, an OJTI certification is required for the new facility/area. A transferring OJTI is not required to retake Basic On-the-Job Instructors (OJTI) Techniques Course (Course 55049001 or current course).

d. OJTI Evaluation. Once yearly, an OS/STMC must conduct an evaluation of each OJTI while they are performing OJTI duties, including documentation and debrief (see Figure I-2, FAA Form 3120­151). If the last evaluation occurred more than 12 months ago, an OJTI evaluation must be conducted prior to resuming OJTI duties. The evaluation must be documented on the OJTI’s FAA Form 3120-1, Section VI, or the electronic equivalent.

2. Facility Training Time. Each facility must establish, in the facility training directive, Target Time, minimum certification time, minimum recertification time, and minimum OJF time for each operational position for which responsibilities are established in the facility Standard Operating Procedures (SOP). Target Time is the maximum time permitted for a trainee to achieve certification on an operational position. Cross-sectional work groups will be used to recommend this amount of time. Facility training time must be expressed in hours per position. At least once per calendar year, facilities must evaluate training time established in the facility training directive and, if necessary, a cross sectional workgroup will be used to make recommendations to adjust training time.

a. Facility training time must be categorized based on the level and type of previous ATC experience (e.g., employees with no previous experience, employees transferring from like-type facility to like-type facility, employees transferring from lower level to higher level facility or

c. The Training Team Lead must: › (1) Select the team OJTIs.

10/30/2020 JO 3120.4R

higher level to lower level facility). When training on combined positions, OJT time may be allotted between the positions based on traffic activity, as determined by the OJTI. If the trainee is certified on one or more combined positions, the total amount of OJT time must be allotted to the positions on which the trainee is not certified.

3. Training Team. The purpose of a Training Team is to cultivate a positive learning environment and provide every opportunity for success. A Training Team will teach, coach, instruct, mentor, and support the trainee. The Training Team must facilitate training by continuously assessing progress and providing feedback. To meet trainee and facility needs, members of the team may change as training progresses.

a. The Training Team must consist of the following:

(1) The Training Team Lead (the trainee’s OS/STMC)

(2) OJTIs (at least two, and no more than three)

(a) Only one OJTI is required for a TMC-IT.

(3) The trainee

(4) Other members, as assigned by the ATM or their designee

b. The Training Team must:

(1) Meet a minimum of once per calendar month to discuss the trainee’s progress.

(2) Have open communication among all Training Team members to ensure that training plan objectives are being met.

(3) Recommend training modifications when appropriate.

(4) Conduct the majority (51 percent or more) of OJT. When a Training Team member is unavailable to provide OJT, another qualified OJTI may provide training.

(5) Determine the operational positions for which OJF is required. OJF is required on at least two operational positions. OJF provides an opportunity for the Training Team to familiarize the trainee with the position through observation of adjacent sectors/positions, monitoring the OJTI working live traffic, sharing information about sector nuances, and discussing “what-if” situations, etc.

(6) Provide feedback on the trainee’s progress and readiness for certification based on training history and observation.

c. The Training Team Lead must:

(1) Select the team OJTIs.

e. The trainee must: › (2) Come to work well prepared, engaged, and ready to be an active…

10/30/2020 JO 3120.4R

(2) Develop the training plan.

(3) Review all aspects of the training plan with the Training Team.

(4) Review the roles and responsibilities of the respective Training Team members.

(5) Serve as a mentor and advocate, fostering a collaborative approach and positive atmosphere for the trainee’s training program.

(6) Provide the OJT Checklist to the trainee at the first Training Team meeting.

(7) Modify the training plan as required to tailor the training to the trainee’s needs and document these changes on an amended training plan.

(8) Review all training documentation to identify inconsistencies.

(9) Identify, assign, schedule, and coordinate SET as outlined in this order, when appropriate.

(10) Facilitate and document Training Team meeting discussions.

(11) Determine if the monthly Training Team meeting will be held while the trainee is not receiving OJT.

(12) Designate in writing an OS/STMC to act as Training Team Lead during a temporary or extended absence.

d. The OJTIs must:

(1) Teach ATC principles and skills to enhance training through instruction on basic and advanced ATC concepts.

(2) Be plugged in to the same position as the trainee when conducting OJT.

(3) Provide performance feedback, including strengths, weaknesses, and specific recommendations for improvement, verbally and in writing by the end of the shift on which OJT occurred.

(4) Complete the OJT Checklist.

e. The trainee must:

(1) Be mentally prepared to participate in OJT and receive performance feedback.

(2) Come to work well prepared, engaged, and ready to be an active participant in the training program.

5. Training Team Meeting. › f. Other items pertinent to training success, such as SIT

10/30/2020 JO 3120.4R

(3) Be familiar with applicable LOAs, SOPs, and other information pertinent to the operation.

4. Training Plan. The purpose of a training plan is to provide a blueprint for FQT that develops employee knowledge, skills, and abilities. The training plan will help ensure that the integrity of the training program is maintained and the trainee is afforded all reasonable opportunity for success. The training plan is a written document that is reviewed in a Training Team meeting prior to the start of OJT.

a. The training plan must include:

(1) Training objectives

(2) Training Team members

(3) Operational positions requiring OJF. OJF should be accomplished before beginning OJT and must be documented on FAA Form 3120-25, -26, -27, -32, -36, or an electronic equivalent.

(4) Position Target Time

(5) Minimum certification hours required before a CSC can be performed

(6) Discussion items including but not limited to PAs, SET, suspension of training, pause in training, training review process, CSCs, Training Team meetings, Supplemental OJT Time, and roles and responsibilities of each team member

b. Modifications to the training plan will be discussed with the Training Team and documented by the Training Team Lead. Retention of training plans and all modifications must be in accordance with national directives and FAA Order JO 1350.14B (or current order).

5. Training Team Meeting. The purpose of a Training Team meeting is for the Training Team to discuss and document a trainee’s progress in the training program. While a Training Team meeting is required at least once per month, the team is encouraged to conduct these meetings as frequently as necessary to recognize performance improvements and deficiencies. The Training Team meeting must cover the following topics:

a. An identification of strengths

b. An identification of weaknesses

c. All PAs/CSCs since the last Training Team meeting

d. Specific recommendations to improve the trainee’s performance

e. Plans to overcome identified deficiencies, such as SDT

f. Other items pertinent to training success, such as SIT

10/30/2020 JO 3120.4R

g. Extenuating circumstances that might affect training progress

h. Progress toward completion of OJT Checklist

6. Pause of OJT. Pause of OJT is an action taken by the OS/STMC after discussion with the Training Team when a trainee has an extenuating circumstance that would have an adverse effect on the continuation of OJT. A pause in training is not a suspension and therefore does not require a training review. Required PAs and Training Team meetings may be omitted during the pause of OJT. The Training Team Lead must document, via memorandum, the pause of training without reference to the extenuating circumstance. The expected duration of the pause in training should be included in the memorandum. Prior to the resumption of training, a Training Team meeting must be conducted to determine if the trainee is prepared to resume training and if additional action is necessary prior to the continuation of OJT.

7. Performance Assessment. › c. The OS/STMC must conduct a Training Team meeting to discuss the PA…

7. Performance Assessment. A PA is a documented review of the trainee’s performance and progress toward certification.

a. The PA must:

(1) Be performed by the trainee’s OS/STMC or their designee, who maintains familiarity or currency on the operational positions.

(2) Not count toward OJT Target Time.

(3) Not result in certification, but may result in a recommendation for a CSC.

(4) Be conducted via direct monitoring.

(5) Be performed within 30 days of the start of OJT and then at least once each calendar month on each position on which the trainee is receiving OJT. The OS/STMC is encouraged to perform multiple PAs in a calendar month on a trainee when appropriate.

(6) Not be performed on combined positions unless training occurred on these combined positions.

(7) Be documented on FAA Form 3120-25, -26, -27, -32, -36, or an electronic equivalent and include a description of performance and specific feedback/recommendations.

(8) Be reviewed by the OS/STMC with the trainee immediately and include feedback and recommendations for improvement.

b. The OS/STMC must directly monitor and have an OJTI plugged into the same position during the PA if the OS/STMC only maintains familiarity on the position. The OJTI is responsible for the position.

c. The OS/STMC must conduct a Training Team meeting to discuss the PA as soon as practicable.

8. Certification Skill Check. › d. Prior to the CSC, the trainee must be informed that the evaluation…

10/30/2020 JO 3120.4R

8. Certification Skill Check. A CSC is an evaluation to determine if a trainee demonstrates the knowledge and skill level necessary to certify on a position.

a. The CSC must:

(1) Be conducted following a Training Team meeting where a majority of the team members recommend a CSC. The OS must be among the majority.

(2) Be conducted upon reaching 100 percent of Target Time.

(3) Be conducted upon completion of Supplemental OJT Time.

(4) Be performed by the trainee’s OS/STMC or their designee, as identified in the facility training directive, who maintains familiarity or currency on the operational position.

(5) Include a review of applicable OJT documents.

(6) Not count toward OJT Target Time.

(7) Be conducted via direct monitoring during normal workload conditions.

(8) Be documented on FAA Form 3120-25, -26, -27, -32, -36, -45 or an electronic equivalent and include a description of performance.

b. The CSC may:

(1) Be conducted at any time after the trainee has completed minimum certification requirements.

(2) Be conducted prior to exhausting Supplemental OJT Time or Additional OJT Time.

(3) Require more than one CSC session.

(4) Be supplemented with verbal and/or written questions, simulation, or other methods to satisfy any Job Subtask not observed.

(5) Be performed on combined positions only if training occurred on these combined positions.

(6) Be substituted for a required monthly PA.

c. The OS/STMC must directly monitor and have an OJTI plugged into the same position during the CSC if the OS/STMC only maintains familiarity on the operational position. The OJTI is responsible for the position.

d. Prior to the CSC, the trainee must be informed that the evaluation being conducted will be a CSC. Position certification must be documented on FAA Form 3120-1 or the electronic equivalent. A certification on combined positions certifies the employee on each of the

9. Supplemental OJT Time. › e. Supplemental OJT Time need not be exhausted before certification or…

10/30/2020 JO 3120.4R

individual positions. For a CSC to result in certification, all applicable job subtasks must be rated as satisfactory or not observed. If a job subtask is not observed during this evaluation, the OS/STMC must document that the trainee has demonstrated satisfactory performance/knowledge for that job subtask through verbal/written questions, simulation, or other methods.

e. If a CSC does not result in certification, a Training Team meeting must be conducted as soon as possible to determine a future course of action.

f. Prior to the OS/STMC completing Block 15 on FAA Form 3120-25, -26, -27, -32, or -36, the OS/STMC must consider:

(1) The performance demonstrated during previous OJT sessions.

(2) The performance demonstrated during previous PAs.

(3) The performance demonstrated during the CSC session.

(4) The trainee’s input.

g. At facilities without OS/STMCs, the ATM must perform the CSC.

9. Supplemental OJT Time. Supplemental OJT Time will be assigned based on the original training plan. The Supplemental OJT Time will be assigned in hours.

a. The trainee’s OS/STMC, in consultation with the Training Team, may make a recommendation for Supplemental OJT Time to the OM/TMO or ATM, based on a review of training documents. The review must take place during a Training Team meeting and before Target Time is exhausted. There must be a reasonable expectation that certification will be achieved prior to requesting Supplemental OJT Time.

b. After receiving a request for Supplemental OJT Time, an OM/TMO or the ATM must have a discussion with the OS/STMC regarding the strategy and training methods that will be employed and then may assign Supplemental OJT Time. If the OM/TMO or ATM denies the Supplemental OJT Time, the OS/STMC and trainee will be informed of the reasons via memorandum.

c. The OS/STMC, upon receiving approval for the Supplemental OJT Time, will amend the training plan to reflect Supplemental OJT Time. The OS/STMC must conduct a Training Team meeting regarding the strategy and training methods that will be employed in the Supplemental OJT Time.

d. Supplemental OJT Time must not exceed 20 percent of the Target Time listed in the training plan for the position. Supplemental OJT Time must be documented in FAA Form 3120­1, Section III, or electronic equivalent. Supplemental OJT Time is intended to achieve training success; however, Supplemental OJT Time is not guaranteed.

e. Supplemental OJT Time need not be exhausted before certification or suspension of OJT.

(1) Be provided a copy of a trainee’s training documentation for the… › (b) FAA Form 3120-25, -26, -27, -32, or -36

10/30/2020 JO 3120.4R

f. Upon the completion of assigned Supplemental OJT Time, a CSC must be conducted. The trainee’s OS/STMC must take one of the following actions: Certification or Suspension of OJT.

10. Suspension of OJT. Suspension of OJT is an action taken by the trainee’s OS/STMC to stop OJT. OJT may not be suspended without conducting a PA or CSC. The trainee must be notified of the documented performance deficiency in writing via memorandum. There is no requirement to exhaust Target Time/Supplemental OJT Time prior to suspension of OJT. Following a suspension of training, a training review must be conducted. When a decision to suspend training has been made at the local level, the trainee shall continue to work the positions on which they are certified. If the ATM then makes the decision to terminate training, the trainee must not be permitted to work any positions.

11. Training Review Process. The purpose of the training review process is to ensure that all reasonable opportunities for training success were afforded, while maintaining the integrity of the training program. The review process is accomplished by a clinical review of the training administered to the trainee on the position where the suspension occurred. A Training Review Board (TRB) must be convened when requested by an ATM or when training has been suspended in accordance with this order.

a. TRB Participants. A TRB must be composed of:

(1) Two participants assigned by the ATM from the following categories. Only one person from each category may be selected.

(a) Category 1: An OS/STMC other than the trainee’s OS/STMC. If an OS/STMC is not available on site, the ATM may assign this duty to any OS/STMC within the district.

(b) Category 2: A Second-Level Manager or above, other than the trainee’s Second- Level Manager. If a Second-Level Manager is not available onsite, the ATM may assign this duty to any Second-Level Manager or above in the district.

(c) Category 3: A TA other than the one assigned to the facility. The ATM may assign this duty to any TA in the district.

(2) The Union shall have the opportunity to designate a participant to serve as a member of the board in accordance with the CBA.

b. TRB Requirements. The TRB must:

(1) Be provided a copy of a trainee’s training documentation for the position being reviewed. Electronic copies are acceptable. TRB participants will be furnished printed copies upon request. Training documentation must include the following, when available:

(a) Training plans

(b) FAA Form 3120-25, -26, -27, -32, or -36

c. Additional TRB actions. › (1) Conduct interviews with the Training Team members and/or other…

10/30/2020 JO 3120.4R

(c) Training Team meeting documentation

(d) SET

(e) PAs

(f) CSCs

(g) OJT Checklist

(h) Suspension of training letter

(i) Copy of the facility training directive

(j) Training Team OJTI certification documentation

(k) Other pertinent documentation

(l) Previous TRB recommendation (if applicable)

(2) Provide a written statement of facts and recommendation to the ATM. The document should include at a minimum, but is not limited to, the following:

(a) The trainee’s adherence to their responsibilities as outlined in this order

(b) The trainee’s identified performance deficiencies

(c) The actions the facility took to correct the trainee’s performance deficiencies

(d) Training consistency (e.g., amount of OJT time per day, per week, or per month; the number of OJTIs involved)

(e) Extenuating circumstances

(f) Whether training was conducted in accordance with this order

(g) A recommendation for either continuation of OJT or termination of training

i. If a unanimous recommendation cannot be achieved, any TRB member may submit a separate recommendation with a dissenting opinion.

ii. If the TRB recommends continuation of OJT, include recommendations to ensure that the integrity of the training program will be maintained and opportunities for success will be afforded.

c. Additional TRB actions. The TRB may:

(1) Conduct interviews with the Training Team members and/or other individuals.

Chapter 6. › 12. Additional OJT Time.

10/30/2020 JO 3120.4R

(2) Request information from the Training Team or other individuals.

d. ATM Determination. The ATM must consider the TRB’s statement of facts and recommendations when making their final determination for continuation or termination of training. The trainee will be notified in writing of the ATM’s decision as soon as possible, but not later than 30 days from the date of the suspension of OJT. If the ATM does not accept the recommendations of the TRB, the ATM must provide written justification to the TRB.

e. Subsequent Training Review. In the event that a subsequent training review becomes necessary for a trainee, the TRB will only review training conducted since the previous training review recommendation. A copy of the previous TRB recommendation is the initial point where any subsequent review will begin.

12. Additional OJT Time. Following a TRB, when an ATM determines that continuation of training is appropriate, the time assigned to the trainee is Additional OJT Time. The Additional OJT Time may be assigned in hours. All Additional OJT Time must be exhausted prior to subsequent suspension of training. Certification of the trainee may occur at any time during the Additional OJT Time. Once the Additional OJT Time is exhausted, a CSC must be conducted resulting in either certification on the position or suspension of training. The Additional OJT Time must be documented in the trainee’s training plan. Additional OJT Time must be documented in Form 3120-1, Section III, or electronic equivalent.

a. Qualification Training Requirements: › (1) Because operational circumstances vary across event locations, for…

10/30/2020 JO 3120.4R

Chapter 7. Air Traffic Control Specialist Special Event Tower Training Requirements

1. General. Those assigned to Special Event Temporary Control Towers must complete the required training described in this chapter prior to performing safety-related ATC services at the temporary location. “Special Event Temporary Control Tower” refers to an operation that provides qualified personnel and equipment for the purpose of ATC services at a specified site for a period of less than 120 days. These operations may include temporary tower deployments in support of aerial demonstrations, fly-ins, sporting events, and similar events, excluding both natural and man-made disasters.

2. Roles and Responsibilities. AT operational personnel involved in Special Event Temporary Control Towers must maintain a comprehensive working knowledge of the procedures and guidelines outlined in this order and other applicable national directives.

a. The Special Event Temporary Control Tower ATM must ensure that:

(1) Training is established, developed, and administered to provide required knowledge and skills to achieve a temporary tower rating as prescribed in this notice.

(2) Training and written/practical tests are documented on a signed FAA Form 3120-25 or an electronic equivalent.

(3) Training documents are prepared and distributed in a timely manner.

(4) Training documents are retained in accordance with this chapter.

(5) Event-specific procedures are developed.

b. Other Special Event Temporary Control Tower operational personnel must:

(1) Hold a current FAA Air Traffic Control Tower (ATCT) credential or CTO Certificate.

(2) Receive instructor-led training (ILT) and/or self study on event-specific procedures and related training materials in support of Special Event Temporary Control Towers.

3. Special Event Temporary Control Tower Specialist Training Requirements.

a. Qualification Training Requirements:

(1) Because operational circumstances vary across event locations, for those Special Event Temporary Control Tower facilities staffed by agency personnel, the ATM and the National Air Traffic Controllers Association (NATCA) representative at the Special Event Temporary Control Tower must collaborate to determine the appropriate qualification training hours and the content for each event. Adequate duty time must be provided for completion of these requirements.

(3) LOAs › (c) Adjacent/overlying AT facilities

10/30/2020 JO 3120.4R

(2) Prior to performing safety-related ATC duties, all operational personnel at Special Event Temporary Control Towers must attain a passing grade of at least 70 percent on a written/practical test that includes the subjects listed under Event-Specific Training below, as applicable to the event.

b. Event-Specific Training:

(1) Operational

(a) Best operating practices

(b) Available weather information, equipment, and capabilities (e.g., ASOS Augmentation)

(c) Status Information Area (SIA)

(d) Strip marking/pad management

(e) Reporting points

(f) Position description/duties

(g) ODO

(h) Waivered procedures

(i) Frequencies

(j) Type/mix of traffic

(2) Notices to Airmen (NOTAMs)

(a) Tower hours of operation

(b) Temporary Flight Restriction (TFR)

(c) Aerobatic Demonstration Area

(d) Letters to Airmen (LTA)

(e) Special Flight Procedures

(3) LOAs

(a) Movement/non-movement areas

(b) Emergency procedures

(c) Adjacent/overlying AT facilities

(7) Special Procedures › (b) Ride hoppers (i.e., rides for hire)

10/30/2020 JO 3120.4R

(4) Airport Layout/Diagram

(a) Aircraft parking and ground movement

(b) Airport elevation

(c) Runway numbers, lengths, and widths

(d) Surface composition (e.g., other than hard surface)

(e) Distance remaining from intersections

(f) Helipad or other landing surface areas

(g) Taxiway widths and restrictions

(h) Airport tenant/building locations

(i) Critical areas

(j) Airspace requirements

(k) Hot Spots

(5) Equipment

(a) Radios

(b) Light guns

(c) Internal hand-held FM radios

(d) Automatic Terminal Information Service (ATIS)

(e) Airport lighting

(f) Approach lighting

(6) Emergency Procedures/Contingency Plan

(a) Flight Standards contact information

(b) Incident/accident documentation/reporting procedures

(7) Special Procedures

(a) Drones and Unmanned Aircraft Systems (UAS)

(b) Ride hoppers (i.e., rides for hire)

(2) Training manual and all related training material › (a) The certifying facility shall forward all facility rating and…

10/30/2020 JO 3120.4R

(c) Reporting No Radio (NORDO) procedures

(8) Technical Operations Support

(a) Contact information

(b) Onsite or offsite available support

(9) Performance expectations

(10) Airport Security

4. Special Event Temporary Control Tower Documentation and Record Retention.

a. Documentation. Document the following on FAA Form 3120-25:

(1) ILT/Self Study

(2) Written tests

(3) Practical tests

(4) Populate Block 12, Comments, with the following statement: Applicable written/practical tests have been administered and completed successfully.

b. Retention. The certifying facility for the Special Event Temporary Control Tower will retain all training documentation in accordance with national directives, including:

(1) Facility rating and all supporting documentation

(2) Training manual and all related training material

(a) The certifying facility shall forward all facility rating and supporting documentation to the operational personnel’s facility of record for entry into their local training record or an electronic equivalent.

1. General. › f. The certification signature for any instructor-led training…

10/30/2020 JO 3120.4R Appendix A

Appendix A. Instructions for Completing FAA Form 3120-1, Training and Proficiency

Record

1. General. This appendix conveys instructions for recording employment data, training, and certification entries on FAA Form 3120-1 or the electronic equivalent. Examples of such corresponding records are shown. These electronic equivalents maintain all data logged on FAA Form 3120-1.

a. The ATM or their designee must ensure that training record entries conform to the requirements of this appendix. These requirements apply to all training occurring on or after the effective date of this order. The requirements described herein are not retroactive.

NOTE: Names entered on the orange cover portion are not required to conform to official payroll name.

b. Training, certifications, recertifications, and technical performance appraisals must be recorded in this record. Other data, such as temporary details, currency maintenance, awards, disciplinary actions, collateral duties, participation on committees, copies of training and other certificates, etc., should be maintained in working-level personnel records. Air Traffic Safety Oversight Service (AOV) credentialing actions are not required to be recorded on FAA Form 3120-1. These records are maintained in the AOV Credentialing Program database.

c. When completing FAA Form 3120-1 or the electronic equivalent, enter only the required specific data. Training record entries must be complete and accurate. Entries must be typed or written in blue or black ink. If an entry must be changed, the incorrect entry must be lined out and the correct information must be inserted. Affected employees and the person making the change must initial the new entry. Electronic equivalent records must be updated when certified records are changed.

d. All entries, including the employee’s initials and certification signature, must be recorded on FAA Form 3120-1 or the electronic equivalent, no later than 120 calendar days following the month in which the training was completed. By initialing or signing, the employee acknowledges that the recorded training has been provided. Operating initials must be used. Electronic equivalent records must be retained in Section IX of the employee’s FAA Form 3120-1.

e. Entries on FAA Form 3120-1 or the electronic equivalent that reflect position certification/recertification and performance reviews must be signed by the employee’s OS or their designee, even though this individual may not have performed the position certification/recertification or appraisal. This signature indicates that the entry (information) logged on FAA Form 3120-1 or the electronic equivalent is accurate.

f. The certification signature for any instructor-led training conducted, including briefings, indicates that the entry is correct. Therefore, the certification signature for instructor-led training entries may be that of the facility’s Support Specialist or an OS/STMC who has knowledge that the training was conducted.

Chapter 7. › 2. Section I. Employment Data.

10/30/2020 JO 3120.4R Appendix A

g. Manual entries must be single spaced. Blocks on the entry line for which no entry will be made must have a diagonal line drawn through them. Portions of a page not intended for future use must also have a diagonal line drawn through them.

h. A signature stamp may be used by the certifying official or OS/STMC as an aid to reduce workload. A signature stamp must only be used by the person whose signature is on the stamp.

i. Each training entry must have a separate signature and set of initials, except as noted in Section V and on FAA Form 3120-1’s electronic equivalent.

j. Mandatory briefing items not pertaining to qualification, certification, proficiency, or management training (e.g., Standards of Conduct, Drug Awareness, The Performance Management System), must not be recorded on FAA Form 3120-1.

2. Section I. Employment Data. The entries in this section pertain to specific employment information.

a. EMPLOYEE’S NAME: Enter the employee’s full payroll name. In the event of a legal name change because of marriage or other reasons, put a single line through the old name and insert the new name and the date of the entry in this block. Do not obliterate the old name since it may be necessary to refer to this name at a later time. The employee must initial next to the name change. The person making the change must initial the new entry.

b. DATE EOD WITH FAA: Enter the date the employee entered on duty (EOD) with the FAA. Do not use the employee’s service computation date. The entry in this block is made only at the employee’s first facility of assignment.

c. FACILITY: Enter the facility’s three-character identifier, type, and level.

d. EOD: Enter the date the employee was officially assigned to the facility. Use the effective date shown on the official Notification of Personnel Action.

e. EMPL INIT: The employee must initial in this block.

NOTE: If the level of a facility changes while an employee is at the facility, make a new entry. Enter the date of the facility-level change in the EOD column.

10/30/2020 JO 3120.4R Appendix A

Figure A-1: Section I, Employment Data

3. Section II A. Air Traffic Certificates. This section relates to certificates that are required for the performance of AT duties and that are not specific to a particular location or area of operation. Do not enter pilot or flight inspection certificate information, etc. Data in this section should not be confused with ratings, which are described in section II B.

3. Section II A. Air Traffic Certificates. › d. EMPL INIT:

a. CERTIFICATE TITLE: Enter the title of the certificate.

b. CERTIFICATE NUMBER: Enter the certificate number. If no number is associated with the certificate, enter “N/A.”

c. DATE ISSUED: Enter the date of issuance as shown on the certificate. If no date is shown on the certificate, enter the date of the entry.

d. EMPL INIT: The employee must initial in this block.

Chapter 7. › 5. Section III. Qualification Training.

10/30/2020 JO 3120.4R Appendix A

Figure A-2: Section II A, Air Traffic Certificates

4. Section II B. Air Traffic Ratings. The entries in this section relate to specific facility ratings, not to certificates. Ratings describe facility operational functions and are required for employees to perform the full range of duties associated with a particular area of specialization or facility. The use of the term “Facility” or “Area” indicates that the employee has successfully completed all the certification requirements for that facility or area.

a. RATING: Enter the title of the rating.

b. FACILITY: Enter the facility’s three-character identifier, level, and type.

c. DATE ISSUED: Enter the effective date of the rating.

d. EMPL INIT: The employee must initial in this block.

Figure A-3: Section II B, Air Traffic Ratings

5. Section III. Qualification Training. Initial Qualification Training (IQT) requirements are described in Appendices C through F. Training relative to position qualification, including Additional OJT hours, Supplemental OJT hours, and position recertification, must be recorded in this section.

5. Section III. Qualification Training. › i. CERTIFICATION SIGNATURE:

10/30/2020 JO 3120.4R Appendix A

a. DEVELOPMENT STAGE: Enter the course number. (Course title may be included). For En Route and Terminal field training, indicate whether the training was instructor-led, simulation, or OJT. Facilities must indicate the position on which qualification has taken place if multiple positions are involved. For recertification, enter recertification and the positions involved.

b. FAC IDENT: Enter “AAC” if FAA Academy–conducted. Enter the three-character facility identifier if facility-conducted.

c. DATE STARTED: Enter the date the employee began training in this course.

d. NO. OF AUTH HOURS: Enter the number of hours authorized to complete this course or the number of Additional OJT or Supplemental OJT hours authorized. The number of hours entered must not exceed those indicated in the appropriate directive. The hours allowed must be derived from the facility training directive. No entry is required in Block D for FAA Academy– conducted training.

e. EMPL INIT: The employee must initial in these blocks.

f. DATE COMPLETED: Enter the date the employee successfully completed, received an incomplete in, or failed this training course, or the date they were granted additional OJT hours. (If the employee did not successfully complete the training, enter “I” for incomplete or “F” for failed in Block A.)

g. HOURS: Enter the actual number of hours the employee used in this portion of the training program. No entry is required in Block G for FAA Academy–conducted training.

h. EMPL INIT: The employee must initial in these blocks.

i. CERTIFICATION SIGNATURE: The certifying official must sign or use a signature stamp in this block.

10/30/2020 JO 3120.4R Appendix A

Figure A-4: Section III (Terminal Example)

FAA Form 3120-1.3 (5-98) NSN: 0052-00-863-7001

10/30/2020 JO 3120.4R Appendix A

Figure A-4: Section III (Terminal Example), continued

FAA Form 3120-1.3 (5-98) NSN: 0052-00-863-7001

10/30/2020 JO 3120.4R Appendix A

Figure A-5: Section III (En Route Example)

FAA Form 3120-1.3 (5-98) NSN: 0052-00-863-7001

10/30/2020 JO 3120.4R Appendix A

Figure A-5: Section III (En Route Example), continued

Continue reading ↓ 120 of 473 passages shown