Radar Vectors
FAA Notice Cancelled Issued Sep 20, 2010 AJW-331 20 pages Copy saved Nov 18, 2026

Notice N 8200.122 Changes to FAA Order 8240.36M, Flight Inspection Report Processing System

This document is no longer current. Cancelled by 8240.36M. Check the official source before relying on it.

Official source ↗ Open PDF

Text read by OCR from a scanned file. Check the original, as some words may be misread.

NOTICE U.S. DEPARTMENT OF TRANSPORTATION N 8200.122 FEDERAL AVIATION ADMINISTRATION Effective Date: National Policy 9/20/10

Cancellation Date: 9/20/11

SUBJ:Changes to FAA Order 8240.36M, Flight Inspection Report Processing System

1. Purpose of This Notice. This Notice provides interim guidance to FAA Order 8240.36M, Flight Inspection Report Processing System (FIRPS).

2. Audience. The audience for this notice is the Air Traffic Technical Operations Eastern, Central, and Western Service Areas; the NAS Implementation Centers; Aviation System Standards Flight Inspection Operations Group offices and crewmembers, Air Force Flight Standards Agency (AFFSA), and the 1st Air Force Reserves Unit; and users of FAA Order 8240.36.

3. Where Can I Find This Notice? Go to the Directives Management System (DMS) website: https://employees.faa.gov/tools resources/orders notices/or the AviationsSystem Standards website: http://www.avn.faa.gov/index.asp?xml=fioo/notices

4. Explanation of Policy Change. This Notice clarifies examples when entering data on a report, corrects reference locations, and updates report forms to match dated form currently used in FIRPS automated forms application.

5. Guidance. Please make the following pen and ink changes to FAA Order 8240.36M.

a. Chapter3, Paragraph 21i. Change Example to "VOR/ R-090/ 45.0nm/ 16,000 ft Revalidation, SAT". Add, "Each component will have its own ESV entry. When DME is included in the ESV, it will be listed separately, 'DME/ R-090/ 45.0 nm/ 16,000 ft Revalidation, SAT'“

b. Chapter 3. Delete "22 – 25. Reserved" from Page 18. Add new Paragraph 22 and FAA Form 8240-1 by adding Pages 19 (and 20)(attached). New Paragraph 22 reads, "22. Flight Inspection Continuation Sheet. When Block 5 "Remarks" is not adequate for all remarks pertaining to an inspection, the continuation sheet may be added as a supplemental page to any report to any form.'

Distribution:AJW-C/E/W/ 33; AFFSA; 1ASF Initiated By:AJW-331 Air Traffic Technical Operations AviationSystemStandards Flight Inspection Policy

N8200.122 9/20/10

C. Appendix 1. Delete Page A1-3 (and 4). FAA Form 8240-1 is moved to Chapter 3, Paragraph22.

d.Appendix 2, Paragraph 6a. Replace REF DATE sentence with, "Enter the date orbit is completed or, if the inspection takes multiple days to complete, enter the last day of the inspection."

e. Appendix 5, Page A5-1, 3rd paragraph, 2nd sentence. Change 2nd sentence FROM "Lights are used for lower minima on an approach (SIAP) and should be reported on the associated facility form."TO "Lights that are used for lower minima on an approach (SIAP) should be reported on the associated facility form."

f. Appendix 5, Paragraph 3f.Change reference FROM "Chapter 2, Paragraph 12m" TO "Chapter 2, Paragraph 12c". After 2nd sentence add, “...to safety exists.

NOTE: A VGSI removed from service is considered out of service (OTS); Status of “Unusable"is not applicable. VGSI may be restricted for coverage.)"

g. Appendix 5, Paragraph 6c(3)(d). Change example in 2nd sentence FROM “For a 4-box system, enter only the angles of Box 2 and Box 3" TO “For a 4-Box system, Box 2 and Box3 angles required; Box 1 and Box 4 may be reported when measured."

h. Appendix 6. FAA Form 8240-6, Flight Inspection Report—Precision Approach Radar, dated 7-2005 is replaced by form dated 7-2006 (attached).

i. Appendix 7. FAA Form 8240-7, Flight Inspection Report—ILSWorksheet dated 4/2000 is replaced by form dated 7-2005 (attached).

j. Appendix 12, Paragraph 3b. Change ground equipment type examples in the 2nd and 3rd sentences FROM “ASR/9" or "ASR/8”TO “ASR-9” or “ASR-8."The examples will then match howthe facilities are entered on the facility data sheets and eliminate a QC question.

k.Appendix 17. FAA Form 8240-17, Flight Inspection Report—RNAV is replaced to make current FIRPS form and FAA Order 8240.36M match.

(1) Replace Paragraph 3k on Page A17-2 with the following,

"k. FAS Vertical PA (Comm). Enter the commissioned vertical path angle for the final approach segment (LNAV/ VNAV and LPV). For LNAV, LP, and GPS overlay approaches, leave blank."

(2) Replace Paragraph 31 on Page A17-2 with the following,

l. FAS Vertical PA(Actual). Enter the actual corrected vertical path for the LPV FAS data block. For LNAV, LNAV/ VNAV, LP, and GPS overlay approaches, leave blank.

9/20/10 N8200.122

1. Appendix 20, 2nd paragraph, 1 sentence. Remove 1st sentence and replace with, "This form, when required, must be sent to Aeronautical Data and Airspace Data Specialist' via the following email: “9-AMC-AVN-DATACHANGE". FAA Form 8240-20changed to reflect email address change. Include facility ID, facility type, and stator or country code in the subject line of the email message.

m. Appendix 21. Attached FAA Form 8240-21, Flight Inspection Report— Controlling Obstacle Evaluations, is replacement so that current FIRPS form and Order 8240.36M match.

For additional technical information, contact Deborah Loveland, Flight Inspection Policy, 405-954-0154. For questions regarding FIRPS forms, please contact Sherri Cockrell, Flight Inspection Policy,405-954-7936.

PhomasC. Accardi Director ofAviationSystemStandards

3 (and 4)

This Page Intentionally Left Blank

9/20/10 8240.36M N8200.122

22. Flight Inspection Report Continuation Sheet. When Block 5 "Remarks" is not adequate for all remarks pertaining to an inspection, the continuation sheet may be added as a supplemental page to any report to any form.

Flight Inspection Report Continuation Sheet FAA Form 8240-1

FLIGHT INSPECTION REPORT CONTINUATION SHEET 5. REMARKS (cont'd)

FLIGHT INSPECTION REPORT CONTINUATION SHEET 5. REMARKS (cont'd)

FAA Form 8240-1(e1.0T-200d)Sapemedaz prevkaat ede5on PAIE 1 OF 3

19 (and 20)

This Page Intentionally Left Blank

9/20/10 8240.36M N8200.122 Appendix 6

Flight Inspection Report—Precision Approach Radar FAA Form 8240-6

FLIGHT INSPECTION REPORT PRECISION APPROACH RADAR

FLIGHT INSPECTION REPORT PRECISION APPROACH RADAR

1. FLIGHT INSPECTION REPORT HEADER 2. CREW INFORMATION IDENT OWNER STATE COUNTRY REGION INSPECTION DATE(S) PIC SIC MS A/C NO

LOCATION RUNWAY INSP TYPE ACM FIFO

3. FACILITY INFORMATION

CONTROLLER PERF FREQUENCIES USED FACILITY STATUS Unusable ILS/MLS/VGSI COINC. PUBLISHED ANGLE FOUND SAT STANDBY EQUIPMENT PUB ALTERNATE ANGLE STANDBY POWER EQUIPMENT TYPE FOUND UNSAT LIGHTING SYSTEMS

4. GENERIC PAR APPROACH RUN CONFIGURATIONS

4. GENERIC PAR APPROACH RUN CONFIGURATIONS

RUN MTI IZATION POLAR- CONFIGURATION DESIRED TX USED TX ANGLE SAT OR RUN CHECKS ON OFF CP LP PRIM STBY UNSAT C P "A" Cursor Prim 2 UNSAT X X "B" Cursor Prim X UNSAT X X "A" Cursor Stby X UNSAT X X "B" Cursor Stby UNSAT AZ Only Apch UNSAT X Alternate Angle UNSAT X 5. NOTAMs

6. REMARKS

6. REMARKS

7. FLIGHT INSPECTION DATA

A. AZIMUTH RADAR PRIMARY TX STBY TX B. ELEVATION RADAR PRIMARY TX STBY TX

COURSE ALIGNMENT GLIDE SLOPE ALIGNMENT DEVIATION ACCURACY RANGE ACCURACY RANGE ACCURACY COVERAGE COVERAGE/USABLE DIST

FAA Form 8240-6 (v1.0 7-2006) Supersedes previous edition

7. FLIGHT INSPECTION DATA

8240.36MN8200.122

Appendix 6

9/20/10

Flight Inspection Report—Precision Approach Radar GPN-22/ TPN-25Continuation Sheet

FLIGHT INSPECTION REPORT -- PAR GPN-22/TPN-25 CONTINUATION SHEET

1. GENERAL

Runway

2. COMPUTER GENERATED PRECISION APPROACH RADAR RUN CONFIGUATIONS

TRACK FTC MTI MODE RCVR TX

TRACK FTC MTI MODE RCVR TX

ANGLE

Run CHAN USED NOR BK UP ON OFF COH NON- COH "A" CURSOR PRIMARY A 2 "A" CURSOR PRIMARY A 2 "A" CURSOR BK UP RC B 2 "B" CURSOR BK UP RC B 2 "B" CURSOR PRIMARY A 2 STANDBY TX CHECK A 2 BK UP DATABASE "A CSR A 2 BK UP DATABASE "A" CSR A 2 BK UP DATABASE "B" CSR A 2 AZ ONLY APCH A 2 ALTERNATE ANGLE "A"CSR A 2

3.OTHERINFORMATION

A. Receiver Sensitivity

NOR Non-COH COH B Clutter (Rain) Reject Yes No N/A C Transmitter Power (db)

D. Usable Range on Radar E Firmware

Part# Version #

F Digital MTI Baseline

Limiting Settings

FAA Form 8240-6(v1.0 7-2006) Supersedes previous edition

RUN CHECKS "SAT" OR C P "UNSAT" UNSAT X X UNSAT X UNSAT X X UNSAT UNSAT X UNSAT UNSAT X UNSAT UNSAT UNSAT X UNSAT X

9/20/10

8240.36M N8200.122

Appendix 6

Appendix 6

Flight Inspection Report—Precision Approach Radar

Continuation Sheet

FLIGHT INSPECTION REPORT--PAR

1. GENERAL

Runway

System Serial #

2. COMPUTER GENERATED PRECISION APPROACH RADAR RUN CONFIGUATIONS

RUN

MTI CFAR ALS PAR AZIMUTH MODE

CHECKS

46-DEG SECTOR ANGLE

A "A" CURSOR AUTO

B "B" CURSOR AUTO

B "B" CURSOR AUTO

C "A" CURSOR AUTO

D "B" CURSOR AUTO

E"A" CURSOR MANUAL

F "A" CURSOR MANUAL

ON OFF ON OFF AUTOMANUAL ON

USABLE DISTANCE

"C" "p"

X

X

X X

X X

X

X

ALTERNATE TOUCHDOWN POINTS ON SAME RUNWAY HEADING

G "A" CURSOR AUTO

H "A" CURSOR MANUAL

I "B" CURSOR MANUAL

JAZ ONLY APPROACH

AZIMUTH ONLY PROCEDURE

AZIMUTH ONLY PROCEDURE

3. PROGRAM DATA

A Name

B Part Number

C Version

D Build Date

ETransmitter Output Power

F Receiver Sensitivity

X

X X

X X

FAA Form 8240-6 (v1.0 7-2006)Supersedes previous edition

A6-7 (and 8)

This Page Intentionally Left Blank

9/20/10 8240.36M N8200.122

Appendix 7

Appendix 7

Flight Inspection Report—ILS Worksheet

FAA Form 8240-7

FLIGHT INSPECTION REPORT --ILS WORKSHEET

1 LOCATION 2 IDENT

3 RUNWAY NO 4DATE(S)OF INSPECTION 5.OWNER

6TYPE OF INSPECTION SITE EVALUATION PERIODIC SPECIAL COMMISSIONING SURVEILLANCE INCOMPLETE 7 FACILITY LOCALIZER SOF GLOE SLOPE 75 MH2 MARXERS DVE INSPECTED LDA TLO LIGHTING SYSTEM COMPASS LOCATORS OTHER 8. FACILITY STATUS FIC G/S B/C 9. LOCALIZER DATA 10. GLIDE SLOPE DATA UNRESTRICTED WIDTH CAT ANGLE CAT B S H L RESTRICTED DUAL FREQ DUAL TX GS TYPE VOICE ESV DUAL TX ESV UNUSABLE BACK CRS YIN N (B 7.02 / S 2.49) GND TEMP OAT BARO ALT 11 NOTES LOC - TH

3 RUNWAY NO 4DATE(S)OF INSPECTION 5.OWNER

12 RUN # CFG PA or ALN 150 CLR Comected) PA P0 CLR/ZI SBP PW or CW Z2 SYM 23 MOD 24 Z5/POL REMARKS

FAA Form 8240-7 (vt 0 7-2005) Supersedes previous edition Page 1 0f2

8240.36M N 8200.122

Appendix 7

9/20/10

Flight Inspection Report—ILS Continuation Worksheet

FAA Form 8240-7

IDENT

FLIGHT INSPECTION REPORT -- ILS CONTINUATION WORKSHEET

FLIGHT INSPECTION REPORT -- ILS CONTINUATION WORKSHEET

1 NOTES

12 RUN CFG PA or ALN 150 CLR (Cortectea) PA 90 CLR/Z1 SBP PWor CW 22 SYM 23

FAA Form 8240-7(vt 0 7.2005) Formerly 8240.7.1

MOD 24

REMARKS Z5/POL

Page 2 012

9/28/09 8240.36M Appendix 17

4. Block 4 -NOTAM(s). Complete IAW Chapter 3, Paragraph 21d.

REMARKS Z5/POL

5. Block 5 - Remarks. Complete IAW Chapter 3, Paragraph 21. If applicable, enter the reimbursable agreement number and owner name. For an RNAV SIAP with LPV minima, include course alignment error (CS-ER), threshold crossing height (TCH), and cyclic redundancy check (CRC) remainder code. When an RNAV GNSS-DME/ DME-IRU type procedure flight inspection is accomplished, enter the following remark: "Procedure Satisfactory for GNSS operations, DME/ DME waiting AFS/ WAJR post analysis."For GPS overlay procedures as described in Block 1, Paragraph e, report the SIAP information and add "Overlay"after the amendment number (Example: Tulsa, OK, VOR OR GPS RWY 23, Amdt 1, Overlay. TUL VOR OTS).

6. Block 6 - Flight Inspection Data:

a. Block A. Route, SID, STAR, DP, or SIAP. Click on the appropriate radio button toselect type inspection.

(1)SIAP. Initial Approach Waypoint (IAWP), Intermediate Waypoint (IWP), Final Approach Waypoint (FAWP), Missed Approach Waypoint (MAWP), Missed Approach Turning Waypoint (MATWP), Step Down Fix(final approach segment) (SDF/F), Step Down Fix (Intermediate)(SDF/I), and Missed Approach Holding Waypoint (MAHWP). Each waypoint must be reported when inspected.

(a) Waypoint Name – Enter waypoint name. For a facility as a waypoint, enter the ident of the facility as the waypoint name.

(b) SAT/ UNSAT – Use the drop-down menu to select the appropriate entry to indicate data accuracy.

(2) Route, SID, STAR, and DP

(a)Waypoint Name -When a facility is used to identify a waypoint, enter the ident of the facility as the waypoint name.

(b) SAT/ UNSAT – Use the drop-down box menu to select the appropriate entry to indicate data accuracy.

(3) Stand-Alone Point-in-Space Fix - Click on the "Route – SID - STAR - DP" radio button, enter the fix name, and select the appropriate “SAT/ UNSAT" entry to indicate data accuracy.

b. Block B - DME Facilities Supporting Procedure. Enter the ident of each DME recorded. Enter additional facilities in Remarks.

8240.36M N8200.122 9/20/10 Appendix 17

Flight Inspection Report--RNAV FAA Form 8240-17

FLIGHTINSPECTION REPORT RNAV

1. FLIGHT INSPECTION REPORT HEADER 2. CREW INFORMATION IDENT OWNER STATE CTRY REGION INSPECTION DATE(S) PIC SIC MS AICNO N/A LOCATION RUNWAY CTRL NUMBER INSP TYPE ACM FIFO

FLIGHTINSPECTION REPORT RNAV

3. FACILITY INFORMATION PROCEDURE TYPE RNP PROCEDURE EVALUATION PROCEDURE NAME WAAS HPL HUMAN FACTORS PROC MODIFIED WAAS VPL OBSTACLE VERIF SENSOR STATUS GEO SNR COMMUNICATIONS AIRINC 424 CODING FAS VERT. P.A. (Comm) LIGHTING SYSTEMS ADD. RUNWAYS FAS VERT. P.A. (Actual) PROC FLYABILITY

4. NOTAMs

4. NOTAMs

5. REMARKS

6. FLIGHT INSPECTION DATA A. O ROUTE -SID - STAR - DP SIAP B. DME FACILITIES SUPPORTING PROCEDURE WAYPOINT NAME SAT/UNSAT

Remarks are required for fields marked with an asterisk FAA Form 8240-17 (v1.1 12-2005) Supersedes previous edition PAGE 1 OF 1

9/28/09 8240.36M Appendix 20

5. REMARKS

g. Upgrade Number (For Flight Inspection Policy use only): The number of inspections that indicate the facility classification performs better than published in the A/ FD. (1) Only one inspection is required to downgrade a facility. (2) Three consecutive inspections indicating an improvement of the facility are required to upgrade a facility, or a corrective action has been made to improve the facility performance.

5. Block 5. REMARKS. Use Field 5 to clarify any pertinent information completed in Fields1through 4.Submit all other changes not covered on Part 1 using FAA Form 8240-20 Part2. Provide an explanation for the change when there is no report or recordings supporting the change request. Example: "Recordings not required". In general, add a remark when it will help explain a facility restriction that is not obviously related to facility performance.

6. Block 6. Itinerary Data:A/C and crew information.

a. Date of Inspection: Enter last day of inspection requiring this form. b. Aircraft No: Aircraft tail number.

c. Pilot: Pilot in Command last name and crew number. d. MS: Mission Specialist last name and crew number. e. Date Sent: Date this form is submitted.

FAA Form 8240-20-2 may be submitted individually or used as a continuation sheet with Part 1.

7. Block 1. Heading. Complete using instruction from Paragraph 1 above.

8. Block 2. Data Sheet Changes. This field is used for data change requests not included in Part1. a. When a "Remark" is to be added to the facility data sheet, list the change as it should appear on the AVNIS data sheet. b. Clarification should be provided to any entry when appropriate.

9. Block 3. Itinerary Data. Complete using instruction from Paragraph 6 above.

8240.36MN 8200.122 9/20/10 Appendix 20

Flight Inspection Report—AVN IS Data Change Submission (Part 1)

AVNIS Data Change Submission

1. TO: Flight Inspection Central Operations EMAIL:9-AMC-AVN-DATACHANGE ATTENTION: Please submit the following changes for incorporation into the appropriate flight publications LOCATION ID TYPE

2. CANCEL: FACILITY RESTRICTION ("FROM"CW"TO") CMPNT DATE FROM TO BYD BELOW REMARKS

2. CANCEL: FACILITY RESTRICTION ("FROM"CW"TO") CMPNT DATE FROM TO BYD BELOW REMARKS

CHECKPOINT: TYPE AIRPORT RAD DIST ALT DESCRIPTION

3. PUBLISH: FACILITY RESTRICTION ("FROM" CW "TO") CMPNT DATE FROM TO BYD BELOW REMARKS

CHECKPOINT: TYPE AIRPORT RAD DIST ALT DESCRIPTION

4. ROLLOUT/GS CBP: A RO CODE C ACTUAL CLASS E GS CBP CODE B TSS ASSIGNED CODE DPUBLISHED CLASS F TSS VERIFICATION G UPGRADE NUMBER

CHECKPOINT: TYPE AIRPORT RAD DIST ALT DESCRIPTION

5. REMARKS:

6. DATE OF INSPECTION AIRCRAFTNO DATE SENT PILOT MISSION SPECIALIST FAA Form 8240-20-1 (v1.1 8-2010) Supersedes previous edition

9/20/10

8240.36M Appendix 20

Flight Inspection Report—AVN IS Data Change Submission

(Part 2)

AVNISData Change Submission

1. TO: Flight Inspection Central Operations EMAIL: 9-AMC-AVN-DATACHANGE

1. TO: Flight Inspection Central Operations EMAIL: 9-AMC-AVN-DATACHANGE

ATTENTION:

Please submit the following changes for incorporation into the appropriate flight publications

LOCATION ID

2. DATA SHEET CHANGES:

3. DATE OF INSPECTION AIRCRAFT NO PILOT MISSION SPECIALIST

FAA Form 8240-20-2 (v1.1 8-2010)

A20-5 (and 6)

TYPE

DATESENT

This Page Intentionally Left Blank

3. DATE OF INSPECTION AIRCRAFT NO PILOT MISSION SPECIALIST

9/20/10 8240.36M Appendix21

Appendix 21. Flight Inspection Report—Controlling Obstacle Evaluation FAA Form 8240-21

FAA Form 8240-21is to be completed when a new obstacle is observed that could potentially become the controlling obstacle of the procedure under inspection. Multiple procedures or obstacles may be listed on this form when they are in the same airport environment.

Appendix 21. Flight Inspection Report—Controlling Obstacle Evaluation FAA Form 8240-21

1. Block 1 - Airport. Enter the airport identifier as specified on the AVNIS Data Sheet.

2. Block 2 – Runway. Enter the runway number or "Circling" for a circling approach.

3. Block3–State.Enter the state code.

4. Block 4 - Date(s) of Inspection. Complete IAW Chapter 2, Paragraph 12.

5. Block 5 - Type of Inspection. Complete IAW Chapter 2, Paragraph 12.

6. Block 6 - Procedure(s). When new potentially controlling obstructions not identified in the procedure package are discovered, enter the following information:

a. Procedure Name. Enter the procedure name. b. Description. Enter a brief description of the new obstacle. c. Location. Enter the latitude/ longitude or radial/ bearing and distance from a known facility. d. Estimate of Height. When evaluated, enter the in-flight height in feet MSL. In Remarks, enter the method used to determine obstacle height. Where possible, note the AGL elevation.

7. Field 7 – Remarks. Enter any information needed to clarify entries in the above fields.

8240.36M N8200.122 9/20/10 Appendix 21

Flight Inspection Report—Controlling Obstacle Evaluation FAA Form 8240-21

FLIGHT INSPECTIONREPORT CONTROLLING OBSTACLE EVALUATIONS 1. FLIGHT INSPECTION REPORT HEADER 2. CREW INFORMATION AIRPORT RUNWAY STATE CTRY PIC SIC MS AVCNO

REGION INSPECTION DATE(S) INSP TYPE ACM FIFO IS/AA

REGION INSPECTION DATE(S) INSP TYPE ACM FIFO IS/AA

3. PROCEDURE(S) IDENTIFICATION OF NEW CONTROLLING OBSTACLE LOCATION ESTIMATE OF HEIGHT PROCEDURE NAME DESCRIPTION LATILON orRADIAL/BEARING & DISTANCE MSL AGL

4. REMARKS

FAA Form 8240-21 (v1.0 10-2005) PAGE 1OF 1