Radar Vectors
Certification Standard Current Flight Standards Service 81 pages Copy saved Nov 19, 2026

FAA-S-ACS-31 Sport Pilot CFI Helicopter SFC Airman Certification Standards

Official source ↗ Open PDF

Sport Flight Instructor Airman Certification Standards for Helicopter ‒ Simplified Flight

Controls

FAA-S-ACS-31

Flight Standards Service

Washington, DC 20591

i Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Foreword

he U.S. Department of Transportation, Federal Aviation Administration (FAA), Office of Safety Standards, Regulatory Support Division, Airman Testing Standards Branch, has published the Sport Flight Instructor Helicopter-Simplified Flight Controls Airman Certification Standards (ACS) to communicate the aeronautical knowledge, risk management, and flight proficiency standards for sport instructor certification Helicopter- Simplified Flight Controls.

This ACS is available for download, in PDF format, from www.faa.gov.

Comments regarding this ACS may be emailed to [email protected].

The FAA created FAA-G-ACS-2, Airman Certification Standards Companion Guide for Pilots, to provide guidance considered relevant and useful to the community. The number of appendices in the ACS was reduced and much of the non-regulatory material was moved to the Airman Certification Standards Companion Guide for Pilots. Applicants, instructors, and evaluators should consult this companion guide to familiarize themselves with ACS procedures. FAA-G-ACS-2 is available for download, in PDF format, from www.faa.gov.

ii Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Introduction

Airman Certification Standards Concept … 1

Area of Operation I. Fundamentals of Instructing

Task A. Effects of Human Behavior and Communication on the Learning Process … 2 Task B. Learning Process … 3 Task C. Course Development, Lesson Plans, and Classroom Training Techniques … 4 Task D. Student Evaluation, Assessment, and Testing … 5 Task E. Elements of Effective Teaching in a Professional Environment … 6 Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention … 7

Area of Operation II. Technical Subject Areas

Task A. Human Factors … 9 Task B. Visual Scanning and Collision Avoidance … 10 Task C. Runway Incursion Avoidance … 10 Task D. Principles of Flight … 11 Task E. Flight Controls … 12 Task F. Operation of Systems … 12 Task G. Performance and Limitations … 13 Task H. National Airspace System … 14 Task I. Navigation Systems and Radar Services … 15 Task J. Navigation and Cross-Country Flight Planning … 16 Task K. 14 CFR and Publications … 17 Task L. Endorsements and Logbook Entries … 18

Area of Operation III. Preflight Preparation

Task A. Pilot Qualifications … 19 Task B. Airworthiness Requirements … 19 Task C. Weather Information … 20

Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight

Task A. Maneuver Lesson … 22

Area of Operation V. Preflight Procedures

Task A. Preflight Assessment … 23 Task B. Flight Deck Management … 23 Task C. Powerplant Starting and Rotor Engagement … 24 Task D. Before Takeoff Check … 25

Table of Contents

iii

Table of Contents

Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Area of Operation VI. Airport and Heliport Operations

Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting … 26 Task B. Communications, Light Signals, and Runway Lighting Systems … 26 Task C. Traffic Patterns … 27

Area of Operation VII. Hovering Maneuvers

Task A. Vertical Takeoff and Landing … 29 Task B. Hover Taxi … 30 Task C. Air Taxi … 31 Task D. Taxiing with Wheel-Type Landing Gear … 32 Task E. Slope Operations … 33

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

Task A. Normal Takeoff and Climb … 35 Task B. Normal and Crosswind Approach … 36 Task C. Maximum Performance Takeoff and Climb … 37 Task D. Steep Approach … 38 Task E. Rolling Takeoff (Wheel-Type Landing Gear) … 39 Task F. Shallow Approach and Running/Roll-On Landing … 41 Task G. Go-Around … 42

Area of Operation IX. Fundamentals of Flight

Task A. Straight-and-Level Flight … 43 Task B. Level Turns … 43 Task C. Straight Climbs and Climbing Turns … 44 Task D. Straight Descents and Descending Turns … 44

Area of Operation X. Performance Maneuvers

Task A. Rapid Deceleration/Quick Stop … 46 Task B. Straight-In Autorotation in a Single-Engine Helicopter-Simplified Flight Controls … 46 Task C. Autorotation with Turns in a Single-Engine Helicopter … 48

Area of Operation XI. Emergency Operations

Task A. Powerplant Failure in a Hover in a Single-Engine Helicopter-Simplified Flight Controls … 50 Task B. Powerplant Failure at Altitude in a Single-Engine Helicopter-Simplified Flight Controls … 51 Task C. Approach and Landing with an Engine Inoperative (Simulated) (Multiengine Helicopter-

Simplified Flight Controls Only) … 52 Task D. Vortex Ring State (VRS) … 53 Task E. Low Rotor Revolutions Per Minute (RPM) Recognition and Recovery … 54 Task F. Systems and Equipment Malfunctions … 55 Task G. Dynamic Rollover … 55

iv

Table of Contents

Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Task H. Ground Resonance … 56 Task I. Low Gravity (G) Recognition and Recovery … 57 Task J. Emergency Equipment and Survival Gear … 57 Task K. Antitorque System Failure … 58

Area of Operation XII. Special Operations

Task A. Confined Area Operations … 59 Task B. Pinnacle Operations … 60

Area of Operation XIII. Post-flight Procedures

Task A. After Landing, Parking, and Securing … 63

Appendix 1: Practical Test Roles, Responsibilities, and Outcomes

Eligibility Requirements for a Flight Instructor Pilot Certificate with a Sport Pilot Rating … 64 Flight Instructor for Helicopter-Simplified Flight Controls Airman Knowledge Test Table … 64 Use of the ACS During a Practical Test … 64 Instructor Responsibilities … 65 Evaluator Responsibilities … 65 Possible Outcomes of the Test … 66 Additional Privilege Task Table … 67 Addition of a Sport Flight Instructor for Helicopter-Simplified Flight Controls Privilege to an Existing

Flight Instructor Certificate without a Sport Pilot Rating … 68 Addition of a Sport Flight Instructor for Helicopter-Simplified Flight Controls Privilege to an Existing

Flight Instructor Certificate with a Sport Pilot Rating … 69 Flight Instructor Renewal/Reinstatement … 70

Appendix 2: Safety of Flight

General … 71 Use of Checklists … 71 Positive Exchange of Flight Controls … 71 Use of Distractions … 71 Aeronautical Decision-Making, Risk Management, Crew Resource Management, and Single-Pilot

Resource Management … 71 Simulated Powerplant Failure Considerations (Single and Multiengine Helicopters) … 72 Autorotations in a Single-Engine Helicopter – Simplified Flight Controls … 72 Helicopter Touchdown Autorotation Endorsement … 72

Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations

Aircraft Requirements & Limitations … 73 Equipment Requirements & Limitations … 73 Single-Seat Aircraft Practical Test … 73 Use of Flight Simulation Training Devices (FSTD) … 73

v

Table of Contents

Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Credit for Pilot Time in an FSTD … 73 Use of Aviation Training Devices (ATD) … 73 Operational Requirements, Limitations, & Task Information … 74

1 Sport Flight Instructor Helicopter - Simplified Flight Controls ACS (FAA-S-ACS-31)

Introduction › Airman Certification Standards Concept

Introduction

Airman Certification Standards Concept

The goal of the airman certification process is to ensure the applicant possesses the knowledge, ability to manage risks, and skill consistent with the privileges of the certificate being exercised, in order to act as pilot- in- command (PIC).

Safe operations in today’s National Airspace System (NAS) require the integration of aeronautical knowledge, risk management, and flight proficiency standards. To accomplish these goals, the FAA drew upon the expertise of organizations and individuals across the aviation and training community to develop the ACS. The ACS integrates the elements of knowledge, risk management, and skill required for each airman certificate or privilege. It thus forms a more comprehensive standard for what an applicant must know, consider, and do to demonstrate proficiency to pass the tests required for issuance of the applicable airman certificate or privilege

Area of Operation I. Fundamentals of Instructing

Area of Operation I. Fundamentals of Instructing

Area of Operation I. Fundamentals of Instructing

Note: N The evaluator must select Task E, Task F, and at least one other Task for initial flight instructor applicants. During a practical test for an added flight instructor rating or flight instructor reinstatement, the evaluator has discretion to evaluate the applicant on Fundamentals of Instructing.

Area of Operation I. Fundamentals of Instructing › Task A.

Task A. Effects of Human Behavior and Communication on the Learning Process

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands human behavior and effective communication, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant understands and explains:

FI.I.A.K1 Elements of human behavior, including:

FI.I.A.K1a a. Definitions of human behavior

FI.I.A.K1b b. Instructor and learner relationship

FI.I.A.K1c c. Motivation

FI.I.A.K1d d. Human needs

FI.I.A.K1e e. Defense mechanisms

FI.I.A.K2 Learner emotional reactions, including:

FI.I.A.K2a a. Anxiety and stress

FI.I.A.K2b b. Impatience

FI.I.A.K2c c. Worry or lack of interest

FI.I.A.K2d d. Physical discomfort, illness, fatigue, and dehydration

FI.I.A.K2e e. Apathy due to inadequate instruction

FI.I.A.K3 Teaching the adult learner.

FI.I.A.K4 Effective communication, including:

FI.I.A.K4a a. Basic elements of communication

FI.I.A.K4b b. Barriers to effective communication

FI.I.A.K4c c. Developing communication skills

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.A.R1 Recognizing and accommodating human behavior.

FI.I.A.R2 Barriers to communication.

Skills: The applicant exhibits the skill to:

FI.I.A.S1 Give examples of how human behavior affects motivation and learning.

FI.I.A.S2 Describe what the instructor can do to deal with:

Area of Operation I. Fundamentals of Instructing

FI.I.A.S2a a. Serious abnormal emotional behavior

FI.I.A.S2b b. Defense mechanisms

FI.I.A.S3 Use effective communication in ground and flight instruction.

Area of Operation I. Fundamentals of Instructing › Task B. Learning Process

Task B. Learning Process

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands the learning process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant understands and explains:

FI.I.B.K1 Definitions of learning.

FI.I.B.K2 Learning theory as it applies to ground and flight instruction, including:

FI.I.B.K2a a. Behaviorism

FI.I.B.K2b b. Cognitive Theory

FI.I.B.K3 Perceptions and insight.

FI.I.B.K4 Acquiring knowledge.

FI.I.B.K5 Laws of learning.

FI.I.B.K6 Domains of learning, including:

FI.I.B.K6a a. Cognitive

FI.I.B.K6b b. Affective

FI.I.B.K6c c. Psychomotor

FI.I.B.K7 Characteristics of learning.

FI.I.B.K8 Scenario-based training (SBT).

FI.I.B.K9 Acquiring skill knowledge, including:

FI.I.B.K9a a. Stages

FI.I.B.K9b b. Knowledge of results

FI.I.B.K9c c. How to develop skills

FI.I.B.K9d d. Learning plateaus

FI.I.B.K10 Types of practice.

FI.I.B.K11 Evaluation versus critique.

FI.I.B.K12 Distractions, interruptions, fixation, and inattention.

FI.I.B.K13 Errors.

FI.I.B.K14 Memory, including:

FI.I.B.K14a a. Sensory

Area of Operation I. Fundamentals of Instructing

FI.I.B.K14b b. Short-Term Memory (STM) and Long-Term Memory (LTM)

FI.I.B.K14c c. How usage affects memory

FI.I.B.K14d d. Forgetting

FI.I.B.K15 Retention of learning.

FI.I.B.K16 Transfer of learning.

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.B.R1 Inadequate or incomplete instruction.

FI.I.B.R2 Lack of learner motivation.

FI.I.B.R3 Recognizing and correcting learner errors.

Skills: The applicant exhibits the skill to:

FI.I.B.S1 Apply educational theories to ground and flight instruction.

FI.I.B.S2 Recognize and correct conditions that undermine the learning process.

FI.I.B.S3 Plan for and use techniques, including realistic distractions that teach flight students how to manage a workload.

Area of Operation I. Fundamentals of Instructing › Task C.

Task C. Course Development, Lesson Plans, and Classroom Training Techniques

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands the teaching process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant understands and explains:

FI.I.C.K1 Teaching, including:

FI.I.C.K1a a. Process

FI.I.C.K1b b. Essential skills

FI.I.C.K2 Course of training.

FI.I.C.K3 Preparation of a lesson, including:

FI.I.C.K3a a. Training objectives and completion standards

FI.I.C.K3b b. Performance-based objectives

FI.I.C.K3c c. Importance of Airman Certification Standards (ACS) in aviation training curricula

FI.I.C.K3d d. Decision-based objectives

FI.I.C.K4 Organization of material.

FI.I.C.K5 Training delivery methods, including:

FI.I.C.K5a a. Lecture

FI.I.C.K5b b. Discussion

Area of Operation I. Fundamentals of Instructing

FI.I.C.K5c c. Guided discussion

FI.I.C.K5d d. Cooperative or group learning

FI.I.C.K5e e. Demonstration-performance

FI.I.C.K5f f. Drill and practice

FI.I.C.K6 Electronic learning (e-Learning).

FI.I.C.K7 Instructional aids and training technologies, including:

FI.I.C.K7a a. Characteristics of effective instructional aids

FI.I.C.K7b b. Reasons for use

FI.I.C.K7c c. Guidelines for use

FI.I.C.K7d d. Types

FI.I.C.K8 Integrated flight instruction.

FI.I.C.K9 Problem-based instruction.

FI.I.C.K10 Planning instructional activity, including:

FI.I.C.K10a a. Blocks of learning

FI.I.C.K10b b. Training syllabus

FI.I.C.K10c c. Lesson plans

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.C.R1 Selection of teaching method.

Skills: The applicant exhibits the skill to:

FI.I.C.S1 Prepare an instructional lesson plan using teaching methods and materials appropriate for Task and learner characteristics, including:

FI.I.C.S1a a. Aeronautical knowledge ground lesson applicable for a classroom

FI.I.C.S1b b. Maneuver introduction and ground lesson

Area of Operation I. Fundamentals of Instructing › Task D. Student Evaluation, Assessment, and Testing

Task D. Student Evaluation, Assessment, and Testing

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands evaluation and testing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant understands and explains:

FI.I.D.K1 Purpose and characteristics of effective assessment.

FI.I.D.K2 Traditional assessments.

FI.I.D.K3 Authentic assessments, including:

FI.I.D.K3a a. Learner-centered assessment

Area of Operation I. Fundamentals of Instructing

FI.I.D.K3b b. Maneuver or procedure grades

FI.I.D.K3c c. Assessing risk management skills

FI.I.D.K4 Choosing an effective assessment method.

FI.I.D.K5 Purposes and types of critiques.

FI.I.D.K6 Oral assessment, including:

FI.I.D.K6a a. Characteristics of effective questions

FI.I.D.K6c b. Answering learner questions

FI.I.D.K6b c. Types of questions to avoid

FI.I.D.K7 Assessment of piloting ability.

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.D.R1 Delivering an assessment.

Skills: The applicant exhibits the skill to:

FI.I.D.S1 Use appropriate methods and techniques to assess learner performance in ground or flight training.

Area of Operation I. Fundamentals of Instructing › Task E. Elements of Effective Teaching in a Professional Environment

Task E. Elements of Effective Teaching in a Professional Environment

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands effects of instructor behavior on effective teaching, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates understanding of:

FI.I.E.K1 Aviation instructor responsibilities, including:

FI.I.E.K1a a. Helping learners

FI.I.E.K1b b. Providing adequate instruction

FI.I.E.K1c c. Training to established standards of performance

FI.I.E.K1d d. Emphasizing the positive

FI.I.E.K1e e. Minimizing learner frustrations

FI.I.E.K2 Flight instructor responsibilities, including supervision and surveillance during training.

FI.I.E.K3 Flight instructor qualifications and professionalism.

FI.I.E.K4 Professional development.

FI.I.E.K5 Instructor ethics and conduct.

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.E.R1 Fulfilling instructor responsibilities.

Area of Operation I. Fundamentals of Instructing

FI.I.E.R2 Exhibiting professionalism.

Skills: The applicant exhibits the skill to:

FI.I.E.S1 Deliver ground or flight instruction on an evaluator-assigned Task in a manner consistent with instructor responsibilities and professional characteristics as stated in K1 through K5.

Area of Operation I. Fundamentals of Instructing › Task F.

Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention

References: R FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands teaching practical risk management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant understands and explains:

FI.I.F.K1 Teaching risk identification, assessment, and mitigation.

FI.I.F.K2 Teaching risk management tools, including:

FI.I.F.K2a a. Pilot/Aircraft/enVironment/External Pressures (PAVE) checklist

FI.I.F.K2b b. Flight Risk Assessment Tools (FRATs)

FI.I.F.K3 When and how to introduce risk management.

FI.I.F.K4 Risk management teaching techniques by phase of instruction.

FI.I.F.K5 Managing risk during flight instruction, including:

FI.I.F.K5a a. Common flight instruction risks

FI.I.F.K5b b. Best practices

FI.I.F.K5c c. Special considerations while teaching takeoffs and landings

FI.I.F.K6 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FI.I.F.R1 Hazards associated with providing flight instruction.

FI.I.F.R2 Obstacles to maintaining situational awareness during flight instruction.

FI.I.F.R3 Recognizing and managing hazards arising from human behavior, including hazardous attitudes.

Skills: The applicant exhibits the skill to:

FI.I.F.S1 Use scenario-based training (SBT) to demonstrate, teach, and assess risk management and Aeronautical Decision-Making (ADM) skills in the context of a Task specified by the evaluator.

FI.I.F.S2 Identify, assess, and mitigate risks commonly associated with flight instruction by maintaining:

FI.I.F.S2a a. Awareness and oversight of the learner’s actions, with timely and appropriate supervision,

intervention, or mitigation as needed

FI.I.F.S2b b. Awareness of the learner’s cognitive/physiological state, with timely action to mitigate anxiety,

fatigue, or other obstruction to learning

Area of Operation I. Fundamentals of Instructing

FI.I.F.S2c c. Overall situational awareness of the aircraft’s dynamic state, its position in space, and

vigilance for unexpected events or changing circumstances that occur in the environment

FI.I.F.S3 Model and teach safety practices, including maintaining:

FI.I.F.S3a a. Collision avoidance while simultaneously providing instruction

FI.I.F.S3b b. Avoidance of unnecessary distractions

FI.I.F.S3c c. Coordinated flight

FI.I.F.S3d d. Awareness of who is manipulating controls through positive exchange of flight controls

FI.I.F.S3e e. Continuous awareness of the aircraft’s dynamic state and position in the NAS

Area of Operation II. Technical Subject Areas › Task A. Human Factors

Area of Operation II. Technical Subject Areas

Area of Operation II. Technical Subject Areas

Note: N The evaluator must select Tasks C and L from this area of operation and at least one other Task.

Task A. Human Factors

References: R AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-25

Objective: O To determine the applicant understands personal health, flight physiology, aeromedical and human factors, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.A.K1 Symptoms, recognition, causes, effects, and corrective actions associated with aeromedical and physiological issues, including:

FH.II.A.K1a a. Hypoxia

FH.II.A.K1b b. Hyperventilation

FH.II.A.K1c c. Middle ear and sinus problems

FH.II.A.K1d d. Spatial disorientation

FH.II.A.K1e e. Motion sickness

FH.II.A.K1f f. Carbon monoxide poisoning

FH.II.A.K1g g. Stress

FH.II.A.K1h h. Fatigue

FH.II.A.K1i i. Dehydration and nutrition

FH.II.A.K1j j. Hypothermia

FH.II.A.K1k k. Optical illusions

FH.II.A.K1l l. Dissolved nitrogen in the bloodstream after scuba dives

FH.II.A.K2 Regulations regarding use of alcohol and drugs.

FH.II.A.K3 Effects of alcohol, drugs, and over-the-counter medications.

FH.II.A.K4 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.A.R1 Aeromedical and physiological issues.

FH.II.A.R2 Hazardous attitudes.

FH.II.A.R3 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.II.A.R4 Confirmation and expectation bias.

Skills: The applicant demonstrates and simultaneously explains how to:

Area of Operation II. Technical Subject Areas

FH.II.A.S1 Associate the symptoms and effects for at least three of the conditions listed in K1a through K1l with the cause(s) and corrective action(s).

FH.II.A.S2 Perform self-assessment, including fitness for flight and personal minimums, for actual flight or a scenario given by the evaluator.

Area of Operation II. Technical Subject Areas › Task B. Visual Scanning and Collision Avoidance

Task B. Visual Scanning and Collision Avoidance

References: R AC 90-48; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands visual scanning and collision avoidance, can apply that knowledge, manage associated risks, demonstrate pilot-in-command skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.B.K1 Environmental conditions that degrade vision.

FH.II.B.K2 Vestibular and visual illusions.

FH.II.B.K3 “See and Avoid” responsibilities.

FH.II.B.K4 Visual scanning procedure and the importance of peripheral vision.

FH.II.B.K5 Aircraft blind spots and clearing procedures.

FH.II.B.K6 Visual cues of an impending mid-air collision.

FH.II.B.K7 Situations that create the greatest collision risk.

FH.II.B.K8 Division of attention inside and outside the aircraft.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.B.R1 Distractions to visual scanning.

FH.II.B.R2 Relaxed intermediate focal distance.

FH.II.B.R3 High volume operational environments.

FH.II.B.R4 Collision reaction time.

FH.II.B.R5 Use of a safety pilot.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.B.S1 Effectively scan using short regularly spaced eye movements.

FH.II.B.S2 Scan around physical obstructions.

FH.II.B.S3 Use appropriate visual scanning techniques.

FH.II.B.S4 Use electronic traffic alert systems, if available.

Area of Operation II. Technical Subject Areas › Task C. Runway Incursion Avoidance

Task C. Runway Incursion Avoidance

References: R AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands runway incursion avoidance, can apply that knowledge, manage

Area of Operation II. Technical Subject Areas

associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.C.K1 Runway incursion definition.

FH.II.C.K2 Taxi instructions/clearances.

FH.II.C.K3 The importance of recording taxi instructions and reviewing taxi routes on the airport diagram.

FH.II.C.K4 Airport markings, signs, and lights including the importance of hold lines associated with runways.

FH.II.C.K5 Appropriate flight deck activities during taxiing, including taxi route planning, briefing the location of Hot Spots, communicating and coordinating with ATC.

FH.II.C.K6 Communication and operational procedures at uncontrolled airports.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.II.C.R2 Confirmation or expectation bias as related to taxi instructions or intentions.

FH.II.C.R3 Entering or crossing runways.

FH.II.C.R4 Low visibility taxi operations.

FH.II.C.R5 Runway incursion after landing.

FH.II.C.R6 Operating on taxiways between parallel runways.

Skills: The applicant demonstrates how to:

FH.II.C.S1 Deliver instruction on the elements and techniques for runway incursion avoidance.

Area of Operation II. Technical Subject Areas › Task D. Principles of Flight

Task D. Principles of Flight

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands aerodynamics appropriate to the desired instructor certificate, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.D.K1 Lift, weight, thrust, and drag.

FH.II.D.K2 Airfoils, including terminology, definitions, and types.

FH.II.D.K3 Torque effect and translating tendency.

FH.II.D.K4 Gyroscopic precession.

FH.II.D.K5 Blade flapping and coning.

FH.II.D.K6 Coriolis effect.

FH.II.D.K7 Pendular action.

FH.II.D.K8 Dissymmetry of lift.

Area of Operation II. Technical Subject Areas

FH.II.D.K9 Retreating blade stall.

FH.II.D.K10 Translational lift, including effective translational lift (ETL).

FH.II.D.K11 Transverse flow effect.

FH.II.D.K12 Aerodynamics of autorotative flight.

FH.II.D.K13 Rotor system characteristics.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.D.R1 The basic aerodynamic principles of flight.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.D.S1 Deliver instruction on principles of flight, including at least three of the elements listed K1 through K13.

Area of Operation II. Technical Subject Areas › Task E. Flight Controls

Task E. Flight Controls

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands the flight controls on the helicopter-simplified flight controls provided for the flight test, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.E.K1 Cyclic, if equipped.

FH.II.E.K2 Collective, if equipped.

FH.II.E.K3 Antitorque pedals, if equipped.

FH.II.E.K4 Throttle and governor, if equipped.

FH.II.E.K5 Simplified flight controls.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.E.R1 Use of simplified flight controls.

FH.II.E.R2 Uncoordinated flight.

FH.II.E.R3 Simplified flight control inputs when operating too close to the ground or other obstructions.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.E.S1 Operate the simplified flight controls.

Area of Operation II. Technical Subject Areas › Task F. Operation of Systems

Task F. Operation of Systems

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands systems on the helicopter-simplified flight controls provided for the flight test, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Area of Operation II. Technical Subject Areas

Note: N If K1 is selected, the evaluator assesses the applicant's knowledge of at least three sub-elements.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.F.K1 Helicopter-simplified flight controls systems, including:

FH.II.F.K1a a. Simplified Flight controls, trim, and, if installed, stability control

FH.II.F.K1b b. Powerplant(s)

FH.II.F.K1c c. Main rotor(s) and antitorque systems, as applicable

FH.II.F.K1d d. Transmission and associated drive shafts

FH.II.F.K1e e. Fuel, oil, and hydraulic, as applicable

FH.II.F.K1f f. Landing gear, brakes, steering, skids, or floats, as applicable

FH.II.F.K1g g. Avionics

FH.II.F.K1h h. Electrical

FH.II.F.K1i i. Pitot-static, vacuum/pressure, and associated flight instruments, as applicable

FH.II.F.K1j j. Environmental

FH.II.F.K1k k. Anti-icing and deicing, including carburetor heat, as applicable

FH.II.F.K2 Indications of and procedures for managing system abnormalities or failures.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.F.R1 Detection of system malfunctions or failures.

FH.II.F.R2 Management of a system failure.

FH.II.F.R3 Monitoring and management of automated systems.

FH.II.F.R4 Providing instruction in unfamiliar aircraft or operating with unfamiliar flight display systems and avionics.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.F.S1 Operate at least three of the helicopter-simplified flight controls systems listed in K1a through K1k.

FH.II.F.S2 Complete the appropriate checklist(s), as applicable.

Area of Operation II. Technical Subject Areas › Task G. Performance and Limitations

Task G. Performance and Limitations

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands helicopter-simplified flight controls performance and limitations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.G.K1 Elements related to performance and limitations by explaining the use of charts, tables, and data to determine performance.

FH.II.G.K2 Factors affecting performance, including:

Area of Operation II. Technical Subject Areas

FH.II.G.K2a a. Atmospheric conditions

FH.II.G.K2b b. Pilot technique

FH.II.G.K2c c. Airport/heliport/helipad/landing area, signs, markings, and lighting, or unprepared surface

environment

FH.II.G.K2d d. Loading and weight and balance

FH.II.G.K2e e. Helicopter-simplified flight controls configuration

FH.II.G.K3 Weight and balance terms, including: basic empty weight, maximum gross weight, arm, moment, reference datum, center of gravity (CG) and CG limits, and useful load.

FH.II.G.K4 Methods for computing longitudinal/lateral CG.

FH.II.G.K5 Aerodynamics.

FH.II.G.K6 Height/Velocity (H/V) diagram according to the Rotorcraft Flight Manual (RFM), as applicable.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.G.R1 Use of performance charts, tables, and data.

FH.II.G.R2 Helicopter-simplified flight controls limitations.

FH.II.G.R3 Possible differences between calculated performance and actual performance.

FH.II.G.R4 Exceeding weight limits.

FH.II.G.R5 Operating outside of CG limits.

FH.II.G.R6 Shifting, adding, and removing weight.

FH.II.G.R7 Retreating blade stall.

FH.II.G.R8 Situations that lead to loss of tail rotor/antitorque effectiveness (LTE), as applicable.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.G.S1 Compute the weight and balance, correct out-of-center of gravity loading errors and determine if the weight and balance remains within limits during all phases of flight.

FH.II.G.S2 Use appropriate helicopter-simplified flight controls performance charts, tables, and data.

Area of Operation II. Technical Subject Areas › Task H. National Airspace System

Task H. National Airspace System

References: R 14 CFR parts 71, 91, 93; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-25; Helicopter Route Charts; VFR Navigation Charts

Objective: O To determine the applicant understands the National Airspace System, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.H.K1 Airspace classes and associated requirements and limitations.

FH.II.H.K2 Chart symbols.

Area of Operation II. Technical Subject Areas

FH.II.H.K3 Special use airspace (SUA), special flight rules areas (SFRA), temporary flight restrictions (TFR), and other airspace areas.

FH.II.H.K4 Currency of publications.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.H.R1 Various classes and types of airspace.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.H.S1 Identify and comply with the requirements for basic VFR weather minimums and flying in particular classes of airspace.

FH.II.H.S2 Correctly identify airspace and operate in accordance with associated communication and equipment requirements.

FH.II.H.S3 Identify the requirements for operating in SUA or within a TFR. Identify and comply with special air traffic rules (SATR) and SFRA operations, as applicable.

Area of Operation II. Technical Subject Areas › Task I. Navigation Systems and Radar Services

Task I. Navigation Systems and Radar Services

References: R AC 91-78; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands navigation systems and radar services, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N The evaluator should reference the manufacturer’s equipment supplement(s) as necessary for appropriate limitations, procedures, etc.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.I.K1 Ground-based navigation (identification, orientation, course determination, equipment, tests, regulations, interference, appropriate use of navigation data, and signal integrity).

FH.II.I.K2 Satellite-based navigation (e.g., equipment, regulations, authorized use of databases, and Receiver Autonomous Integrity Monitoring (RAIM)).

FH.II.I.K3 Radar assistance to visual flight rules (VFR) aircraft (e.g., operations, equipment, available services, traffic advisories).

FH.II.I.K4 Transponder (Mode(s) A, C, and S) and Automatic Dependent Surveillance-Broadcast (ADS-B).

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.I.R1 Management of automated navigation and autoflight systems.

FH.II.I.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.II.I.R3 Limitations of the navigation system in use.

FH.II.I.R4 Loss of a navigation signal.

FH.II.I.R5 At the discretion of the evaluator, use the autopilot to make appropriate course intercepts, if installed.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.I.S1 Use an airborne electronic navigation system.

Area of Operation II. Technical Subject Areas

FH.II.I.S2 Determine the aircraft's position using the navigation system.

FH.II.I.S3 Intercept and track a given course, radial, or bearing.

FH.II.I.S4 Recognize and describe the indication of station or waypoint passage.

FH.II.I.S5 Recognize loss of navigational signal and take appropriate action.

FH.II.I.S6 Use proper communication procedures when utilizing radar services.

Area of Operation II. Technical Subject Areas › Task J. Navigation and Cross-Country Flight Planning

Task J. Navigation and Cross-Country Flight Planning

References: R 14 CFR part 91; AC 91.21-1; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; Helicopter Route Charts; NOTAMs; POH/RFM; VFR Navigation Charts

Objective: O To determine the applicant understands navigation and cross-country flight planning, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N Preparation, presentation, and explanation of a computer-generated flight plan is an acceptable option.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.J.K1 Route planning, including consideration of different classes and special use airspace (SUA) and selection of appropriate and available navigation/communication systems and facilities including the use of.

FH.II.J.K1a a. Use of an electronic flight bag (EFB), if used

FH.II.J.K1b b. Chart Supplements

FH.II.J.K1c c. Aeronautical charts

FH.II.J.K1d d. Notices to Air Missions (NOTAMs)

FH.II.J.K2 Altitude selection accounting for terrain and obstacles, autorotation requirements of the helicoptersimplified flight controls, VFR cruising altitudes, and the effect of wind.

FH.II.J.K3 Plotting a course.

FH.II.J.K4 Power setting selection.

FH.II.J.K5 Calculating:

FH.II.J.K5a a. Time, climb and descent rates, course, distance, heading, pressure altitude, density altitude,

true airspeed, and groundspeed

FH.II.J.K5b b. Estimated time of arrival, including conversion to universal coordinated time (UTC)

FH.II.J.K5c c. Fuel requirements, including reserve

FH.II.J.K6 Elements of a VFR flight plan.

FH.II.J.K7 Correlate weather information to make a go/no-go decision.

FH.II.J.K8 Procedures for activating and closing a VFR flight plan.

FH.II.J.K9 Magnetic compass errors.

FH.II.J.K10 Pilotage and dead reckoning.

FH.II.J.K11 Planned calculations versus actual results and required corrections.

Area of Operation II. Technical Subject Areas

FH.II.J.K12 Diversion and lost procedures.

FH.II.J.K13 Inflight intercept procedures.

FH.II.J.K14 Chart symbols.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.II.J.R1 Pilot.

FH.II.J.R2 Aircraft.

FH.II.J.R3 Environment (e.g., weather, airports, airspace, terrain, obstacles, including wire strike hazards).

FH.II.J.R4 External pressures.

FH.II.J.R5 Limitations of air traffic control (ATC) services.

FH.II.J.R6 Fuel planning.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.J.S1 Prepare, present, and explain a cross-country flight plan assigned by the evaluator, including a risk analysis to the first fuel stop.

FH.II.J.S2 Apply pertinent information from appropriate and current aeronautical charts, Chart Supplements; Notices to Air Missions (NOTAMs) relative to airport/heliport/helipad/landing area, runway and taxiway closures; and other flight publications.

FH.II.J.S3 Create a navigation plan and simulate filing a VFR flight plan.

FH.II.J.S4 Recalculate fuel reserves based on a scenario provided by the evaluator.

Area of Operation II. Technical Subject Areas › Task K. 14 CFR and Publications

Task K. 14 CFR and Publications

References: R 14 CFR parts 1, 61, 91; 49 CFR part 830; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands the Code of Federal Regulations and other relevant publications, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.K.K1 14 CFR parts 1, 61, and 91.

FH.II.K.K2 49 CFR part 830.

FH.II.K.K3 Advisory Circulars, INFOs, and SAFOs.

FH.II.K.K4 Airman Certification Standards.

FH.II.K.K5 Pilot's Operating Handbooks or flight manuals.

FH.II.K.K6 Aeronautical Information Manual (AIM).

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

Area of Operation II. Technical Subject Areas

FH.II.K.R1 Use of expired charts, manuals, or publications without current updates.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.K.S1 Teach at least one of the elements listed in K1 through K6.

Area of Operation II. Technical Subject Areas › Task L. Endorsements and Logbook Entries

Task L. Endorsements and Logbook Entries

References: R 14 CFR part 61; AC 61-65, FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands logbook entries and endorsements, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.II.L.K1 Required logbook entries for instruction given.

FH.II.L.K2 Required student pilot pre-solo knowledge test, solo endorsements, and logbook entries.

FH.II.L.K3 Other required pilot logbook endorsements (e.g., sport pilot, Class B, C, and D airspace, touchdown autorotation, etc.).

FH.II.L.K4 Preparation of a recommendation for a pilot practical test, including appropriate logbook entry and relevant certificate/rating application for:

FH.II.L.K4a a. Initial pilot certification

FH.II.L.K4b b. Additional pilot certification

FH.II.L.K4c c. Additional aircraft qualification

FH.II.L.K5 Endorsement of a pilot logbook for the satisfactory completion of an FAA flight review.

FH.II.L.K6 Required flight instructor records.

FH.II.L.K7 Flight instructor renewal and reinstatement requirements.

Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:

FH.II.L.R1 Endorsements without appropriate limitations or expiration dates.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.II.L.S1 Describe and prepare logbook entries/endorsements required for at least two of the events specified in the elements or sub-elements of K1 through K5.

Area of Operation III. Preflight Preparation › Task A. Pilot Qualifications

Area of Operation III. Preflight Preparation

Area of Operation III. Preflight Preparation

Note: N The evaluator must select at least one Task from this Area of Operation.

Task A. Pilot Qualifications

References: R 14 CFR parts 61, 68, 91; AC 60-28, AC 68-1; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands pilot training and qualification requirements for different levels of pilot certificate including student pilot, sport pilot helicopter-simplified flight controls, sport flight instructor helicopter-simplified flight controls; can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.III.A.K1 Certification, currency, and recordkeeping requirements, including training and logbook entries.

FH.III.A.K2 Privileges and limitations of pilot certificates at student pilot, sport pilot helicopter-simplified flight controls, and sport flight instructor helicopter-simplified flight controls levels.

FH.III.A.K3 Medical eligibility and temporary disqualifications.

FH.III.A.K4 Documents pilots must possess to exercise sport pilot privileges.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.III.A.R1 Proficiency versus currency.

FH.III.A.R2 Flying an unfamiliar helicopter-simplified flight controls or operating with unfamiliar flight display systems and avionics.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.III.A.S1 Deliver instruction on at least two of the elements specified in K1 through K4.

Area of Operation III. Preflight Preparation › Task B. Airworthiness Requirements

Task B. Airworthiness Requirements

References: R 14 CFR parts 21 and/or 23 as applicable, 27, 29, 39, 43, 91; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands airworthiness requirements, including aircraft certificates, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.III.B.K1 General airworthiness requirements and compliance for helicopter-simplified flight controls, including:

FH.III.B.K1a a. Location and expiration dates of required aircraft certificates

FH.III.B.K1b b. Required inspections and aircraft logbook documentation

FH.III.B.K1c c. Airworthiness Directives and Special Airworthiness Information Bulletins (as applicable to the

aircraft presented for the practical test)

FH.III.B.K1d d. Purpose and procedure for obtaining a special flight permit

FH.III.B.K2 Pilot-performed preventive maintenance.

Area of Operation III. Preflight Preparation

FH.III.B.K3 Equipment requirements for day and night VFR flight, including:

FH.III.B.K3a a. Flying with inoperative equipment

FH.III.B.K3b b. Using an approved Minimum Equipment List (MEL)

FH.III.B.K3c c. Kinds of Operation Equipment List (KOEL)

FH.III.B.K3d d. Required discrepancy records or placards

FH.III.B.K4 Special airworthiness certificate aircraft operating limitations, as applicable.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.III.B.R1 Inoperative equipment discovered prior to flight.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.III.B.S1 Locate and describe helicopter-simplified flight controls airworthiness and registration information.

FH.III.B.S2 Determine the helicopter- simplified flight controls is airworthy in the scenario given by the evaluator.

FH.III.B.S3 Apply appropriate procedures for operating with inoperative equipment in a scenario given by the evaluator.

Area of Operation III. Preflight Preparation › Task C. Weather Information

Task C. Weather Information

References: R 14 CFR part 91; AC 91-92; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25, FAA-H-8083-28

Objective: O To determine the applicant understands weather information, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N If K2 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.

Note: N If K3 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.III.C.K1 Sources of weather data (e.g., National Weather Service, Flight Service) for flight planning purposes.

FH.III.C.K2 Acceptable weather products and resources required for preflight planning, current and forecast weather for departure, en route, and arrival phases of flight such as:

FH.III.C.K2a a. Airport Observations (METAR, SPECI, AWOS, ASOS) and Pilot Weather Reports (PIREPs)

FH.III.C.K2b b. Surface Analysis Chart, Ceiling and Visibility Chart (CVA)

FH.III.C.K2c c. Terminal Aerodrome Forecasts (TAF)

FH.III.C.K2d d. Graphical Forecasts for Aviation (GFA)

FH.III.C.K2e e. Wind and temperature aloft forecast (FB)

FH.III.C.K2f f. Convective Outlook (AC)

FH.III.C.K2g g. Inflight Aviation Weather Advisories including Airmen's Meteorological Information (AIRMET),

Significant Meteorological Information (SIGMET), and Convective SIGMET

Area of Operation III. Preflight Preparation

FH.III.C.K3 Meteorology applicable to the departure, en route, alternate, and destination under visual flight rules (VFR) in Visual Meteorological Conditions (VMC), including expected climate and hazardous conditions such as:

FH.III.C.K3a a. Atmospheric composition and stability

FH.III.C.K3b b. Wind (e.g., windshear, mountain wave, factors affecting wind, etc.)

FH.III.C.K3c c. Temperature, heat exchange, and temperature inversion

FH.III.C.K3d d. Moisture/precipitation

FH.III.C.K3e e. Weather system formation, including air masses and fronts

FH.III.C.K3f f. Clouds

FH.III.C.K3g g. Turbulence

FH.III.C.K3h h. Thunderstorms and microbursts

FH.III.C.K3i i. Icing and freezing level information

FH.III.C.K3j j. Fog/mist

FH.III.C.K3k k. Frost

FH.III.C.K3l l. Obstructions to visibility (e.g., smoke, haze, volcanic ash, etc.)

FH.III.C.K4 Flight deck instrument displays of digital weather and aeronautical information.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.III.C.R1 Making the go/no-go and continue/divert decisions, including:

FH.III.C.R1a a. Circumstances that would make diversion prudent

FH.III.C.R1b b. Personal weather minimums

FH.III.C.R1c c. Hazardous weather conditions, including known or forecast icing or turbulence aloft

FH.III.C.R2 Use and limitations of:

FH.III.C.R2a a. Installed onboard weather equipment

FH.III.C.R2b b. Aviation weather reports and forecasts

FH.III.C.R2c c. Inflight weather resources

Skills: The applicant demonstrates and simultaneously explains how to:

FH.III.C.S1 Use available aviation weather resources to obtain an adequate weather briefing.

FH.III.C.S2 Analyze the implications of at least three of the conditions listed in K3a through K3l, using actual weather or weather conditions provided by the evaluator.

FH.III.C.S3 Correlate weather information to make a go/no-go decision.

Area of Operation IV.

Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight

Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight

Note: N The evaluator asks the applicant to present a preflight lesson on the selected maneuver as the lesson would be taught to a student and determines the outcome of this Task before the flight portion of the practical test. Previously developed lesson plans from the instructor applicant's library may be used.

Area of Operation IV. › Task A. Maneuver Lesson

Task A. Maneuver Lesson

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands the elements associated with a maneuver Task selected from Area of Operation VII (Hovering Maneuvers) through Area of Operation XII (Special Operations) and applies that knowledge when delivering ground instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.IV.A.K1 Purpose of the maneuver.

FH.IV.A.K2 Elements of the maneuver and the associated common errors.

FH.IV.A.K3 Desired outcome(s), including completion standards.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.IV.A.R1 The selected maneuver Task.

Skills: The applicant exhibits the skill to:

FH.IV.A.S1 Deliver instruction on the selected maneuver using a lesson plan, teaching methods, and teaching aids, as appropriate, that incorporate K1 through K3.

Area of Operation V. Preflight Procedures › Task A. Preflight Assessment

Area of Operation V. Preflight Procedures

Area of Operation V. Preflight Procedures

Note: N The evaluator must select at least one Task from this Area of Operation.

Task A. Preflight Assessment

References: R AC 91-32; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands preflight assessment, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.V.A.K1 Pilot self-assessment.

FH.V.A.K2 Determining that the helicopter-simplified flight controls to be used is in an airworthy condition.

FH.V.A.K3 Helicopter-simplified flight controls preflight inspection, including:

FH.V.A.K3a a. Which items should be inspected

FH.V.A.K3b b. The reasons for checking each item

FH.V.A.K3c c. How to detect possible defects

FH.V.A.K3d d. The associated regulations

FH.V.A.K4 Environmental factors, including weather, terrain, route selection, and obstructions.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.V.A.R1 Pilot.

FH.V.A.R2 Aircraft.

FH.V.A.R3 Environment (e.g., weather, icing, airports/heliports/helipads/landing areas, airspace, terrain, obstacles).

FH.V.A.R4 External pressures.

FH.V.A.R5 Aviation security concerns.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.V.A.S1 Inspect the helicopter-simplified flight controls with reference to an appropriate checklist.

FH.V.A.S2 Verify the helicopter-simplified flight controls is in condition for safe flight and conforms to its type design.

FH.V.A.S3 Perform self-assessment.

FH.V.A.S4 Continue to assess the environment for safe flight.

Area of Operation V. Preflight Procedures › Task B. Flight Deck Management

Task B. Flight Deck Management

References: R 14 CFR part 91; AC 120-71; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands flight deck management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Area of Operation V. Preflight Procedures

Note: N See Appendix 2: Safety of Flight.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.V.B.K1 Passenger briefing requirements, including operation and required use of safety restraint systems.

FH.V.B.K2 Use of appropriate checklists.

FH.V.B.K3 Requirements for current and appropriate navigation data.

FH.V.B.K4 Securing items and cargo.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.V.B.R1 Use of systems or equipment, including automation and portable electronic devices.

FH.V.B.R2 Inoperative equipment.

FH.V.B.R3 Passenger distractions.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.V.B.S1 Secure all items in the aircraft.

FH.V.B.S2 Conduct an appropriate passenger briefing, including identifying the pilot-in-command (PIC), use of safety belts, shoulder harnesses, doors, passenger conduct, rotor blade avoidance, and emergency procedures.

FH.V.B.S3 Properly program and manage helicopter-simplified flight controls automation, as applicable.

FH.V.B.S4 Appropriately manage risks by utilizing ADM, including SRM/CRM.

Area of Operation V. Preflight Procedures › Task C. Powerplant Starting and Rotor Engagement

Task C. Powerplant Starting and Rotor Engagement

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands powerplant starting and rotor engagement procedures can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.V.C.K1 Starting under various conditions.

FH.V.C.K2 Starting procedures, including the use of external power, as applicable.

FH.V.C.K3 Limitations associated with starting.

FH.V.C.K4 Conditions leading to and procedures for an aborted start.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.V.C.R1 Rotor(s) engagement, as applicable.

FH.V.C.R2 Use of external power unit.

FH.V.C.R3 Limitations during starting.

Skills: The applicant demonstrates and simultaneously explains how to:

Area of Operation V. Preflight Procedures

FH.V.C.S1 Position the helicopter-simplified flight controls properly considering structures, surface conditions, other aircraft, wind, and the safety of nearby persons and property.

FH.V.C.S2 Use flight control frictions, as applicable.

FH.V.C.S3 Complete the appropriate checklist(s).

FH.V.C.S4 Engage and manage the rotor system(s), as appropriate.

Area of Operation V. Preflight Procedures › Task D. Before Takeoff Check

Task D. Before Takeoff Check

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands before takeoff checks, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.V.D.K1 Purpose of before takeoff checklist items, including:

FH.V.D.K1a a. Reasons for checking each item

FH.V.D.K1b b. Detecting malfunctions

FH.V.D.K1c c. Configuring the helicopter-simplified flight controls as recommended by the manufacturer

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.V.D.R1 Division of attention while conducting before takeoff checks.

FH.V.D.R2 Unexpected or unclear clearances from ATC.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.V.D.S1 Complete the appropriate checklist(s).

FH.V.D.S2 Review takeoff performance and emergency procedures.

FH.V.D.S3 Verify that the powerplant temperature(s) and pressure(s) are suitable for takeoff.

FH.V.D.S4 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.V.D.S5 Divide attention inside and outside the helicopter-simplified flight controls.

Area of Operation VI. Airport and Heliport Operations › Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting

Area of Operation VI. Airport and Heliport Operations

Area of Operation VI. Airport and Heliport Operations

Note: N The evaluator must select at least one Task from this Area of Operation.

Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting

References: R 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands airport/runway/ taxiway/heliport/helipad signs, markings, and lighting, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VI.A.K1 Airport runway, heliport, helipad, taxiway signs, markings, and lighting.

FH.VI.A.K2 Airport movement area.

FH.VI.A.K3 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VI.A.R1 Interpretation of signs, markings, or lighting.

FH.VI.A.R2 Landing site dimensions and limitations.

FH.VI.A.R3 Conflict with aircraft, vehicles, and persons.

FH.VI.A.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VI.A.R5 Runway incursion.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VI.A.S1 Comply with airport/heliport/helipad signs, markings, and lighting encountered, as applicable to the helicopter-simplified flight controls provided for the practical test.

FH.VI.A.S2 Analyze and correct common errors related to this Task.

Area of Operation VI. Airport and Heliport Operations › Task B. Communications, Light Signals, and Runway Lighting Systems

Task B. Communications, Light Signals, and Runway Lighting Systems

References: R 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands communications and ATC light signals, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VI.B.K1 How to obtain appropriate radio frequencies.

FH.VI.B.K2 Proper radio communication procedures and air traffic control (ATC) phraseology.

FH.VI.B.K3 ATC light signal recognition.

FH.VI.B.K4 Appropriate use of transponder(s).

FH.VI.B.K5 Lost communication procedures.

FH.VI.B.K6 Equipment issues that could cause loss of communication.

Area of Operation VI. Airport and Heliport Operations

FH.VI.B.K7 Radar assistance.

FH.VI.B.K8 Runway Status Lighting Systems.

FH.VI.B.K9 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VI.B.R1 Communication.

FH.VI.B.R2 Deciding if and when to declare an emergency.

FH.VI.B.R3 Use of non-standard phraseology.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VI.B.S1 Select and activate appropriate frequencies.

FH.VI.B.S2 Transmit using standard phraseology and procedures as specified in the Aeronautical Information Manual (AIM) and Pilot/Controller Glossary.

FH.VI.B.S3 Acknowledge radio communications and comply with ATC instructions or as directed by the evaluator.

FH.VI.B.S4 Analyze and correct common errors related to this Task.

Area of Operation VI. Airport and Heliport Operations › Task C. Traffic Patterns

Task C. Traffic Patterns

References: R 14 CFR part 91; AIM; FAA-H-8083-4, FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands traffic patterns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VI.C.K1 Towered and nontowered airport/heliport/helipad/landing area operations and restrictions.

FH.VI.C.K2 Traffic pattern for the current conditions.

FH.VI.C.K3 Right-of-way rules.

FH.VI.C.K4 Use of automated weather and airport/heliport information.

FH.VI.C.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VI.C.R1 Collision hazards.

FH.VI.C.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VI.C.R3 Windshear and wake turbulence.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VI.C.S1 Identify and interpret airport/heliport/helipad/landing area runways, taxiways, markings, signs, and lighting.

FH.VI.C.S2 Comply with recommended helicopter traffic pattern procedures, as appropriate.

Area of Operation VI. Airport and Heliport Operations

FH.VI.C.S3 Correct for wind drift to maintain the proper ground track.

FH.VI.C.S4 Maintain orientation with the runway/landing area in use, as applicable.

FH.VI.C.S5 Maintain traffic pattern altitude, ±100 feet, and the appropriate airspeed, ±10 knots.

FH.VI.C.S6 Maintain situational awareness and proper spacing from other traffic or avoid the flow of fixed-wing traffic, as appropriate.

FH.VI.C.S7 Analyze and correct common errors related to this Task.

Area of Operation VII. Hovering Maneuvers

Area of Operation VII. Hovering Maneuvers

Area of Operation VII. Hovering Maneuvers

Note: N The evaluator must select at least one Task from this Area of Operation.

Note: N Task D will be tested in addition to the other Tasks if the applicant supplies a helicopter-simplified flight controls with wheel-type landing gear.

Area of Operation VII. Hovering Maneuvers › Task A. Vertical Takeoff and Landing

Task A. Vertical Takeoff and Landing

References: R 14 CFR part 91; AC 90-95; FAA-H-8083-4, FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands vertical takeoff and landing from a hover, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VII.A.K1 Elements related to a vertical takeoff to a hover and landing from a hover.

FH.VII.A.K2 Effect of wind on flight control inputs.

FH.VII.A.K3 Effect of weight and balance and various centers of gravity.

FH.VII.A.K4 Ground effect.

FH.VII.A.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VII.A.R1 Loss of tail rotor effectiveness (LTE), as applicable.

FH.VII.A.R2 Dynamic rollover.

FH.VII.A.R3 Ground resonance, as applicable.

FH.VII.A.R4 Powerplant failure during hover.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VII.A.S1 Complete the appropriate checklist(s).

FH.VII.A.S2 Comply with air traffic control (ATC) or evaluator instructions and make radio calls as appropriate.

FH.VII.A.S3 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VII.A.S4 Ascend to and maintain recommended hovering altitude, and descend from recommended hovering altitude in headwind, crosswind, and tailwind conditions, without drift.

FH.VII.A.S5 Maintain recommended hovering altitude, ±1/2 of that altitude within 10 feet of the surface, if above 10 feet, ±5 feet.

FH.VII.A.S6 Maintain position within 4 feet of a designated point with no aft movement.

FH.VII.A.S7 Descend vertically to within 4 feet of the designated touchdown point.

FH.VII.A.S8 Maintain specified heading, ± 10°.

FH.VII.A.S9 Analyze and correct common errors related to this Task.

Area of Operation VII. Hovering Maneuvers

Area of Operation VII. Hovering Maneuvers › Task B. Hover Taxi

Task B. Hover Taxi

References: R AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands hover taxi operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VII.B.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).

FH.VII.B.K2 Hover taxi instructions, clearances, and limitations.

FH.VII.B.K3 Airport/heliport/helipad/landing area, signs, markings, and lighting, or unprepared surface environment.

FH.VII.B.K4 Visual indicators for wind.

FH.VII.B.K5 Aircraft lighting, as appropriate.

FH.VII.B.K6 Procedures for:

FH.VII.B.K6a a. Pilot activities during taxiing

FH.VII.B.K6b b. Safe hover taxi at towered and non-towered airports/heliports/helipads/landing areas

FH.VII.B.K6c c. Entering or crossing runways

FH.VII.B.K7 Height/Velocity (H/V) considerations, as applicable.

FH.VII.B.K8 Aircraft operating limitations.

FH.VII.B.K9 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VII.B.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VII.B.R2 Reduced visibility.

FH.VII.B.R3 Runway incursion.

FH.VII.B.R4 Other aircraft, vehicles, persons, and hazards.

FH.VII.B.R5 Hazardous effects of downwash.

FH.VII.B.R6 Main rotor(s), tail rotor, and tail strike hazards, as applicable.

FH.VII.B.R7 Height/Velocity (H/V) considerations, as applicable.

FH.VII.B.R8 Confirmation or expectation bias as related to taxi instructions or intentions.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VII.B.S1 Complete the appropriate checklist(s).

FH.VII.B.S2 Receive and correctly read back clearances/instructions, as applicable.

FH.VII.B.S3 Use an airport diagram or taxi chart during taxi, if published, and maintain situational awareness.

FH.VII.B.S4 Comply with airport/heliport taxiway markings, signals, and signs.

Area of Operation VII. Hovering Maneuvers

FH.VII.B.S5 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VII.B.S6 Maintain a straight ground track within ±4 feet of a designated ground track.

FH.VII.B.S7 Maintain recommended hovering altitude, ±1/2 of that altitude within 10 feet of the surface, if above 10 feet, ±5 feet.

FH.VII.B.S8 Hover taxi over specified ground references, demonstrating forward, sideward, and rearward hovering and hovering turns.

FH.VII.B.S9 Maintain a constant rate of turn at pivot points.

FH.VII.B.S10 Maintain a position within 4 feet of each pivot point during turns.

FH.VII.B.S11 Make a 360° pivoting turn, left and right, stopping within 10° of a specified heading.

FH.VII.B.S12 Make smooth, timely, and correct control application during the maneuver.

FH.VII.B.S13 Analyze and correct common errors related to this Task.

Area of Operation VII. Hovering Maneuvers › Task C. Air Taxi

Task C. Air Taxi

References: R AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands air taxi operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VII.C.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).

FH.VII.C.K2 Air taxi instructions, clearances, and limitations.

FH.VII.C.K3 Airport/heliport/helipad/landing area, signs, markings, and lighting, or unprepared surface environment.

FH.VII.C.K4 Visual indicators for wind.

FH.VII.C.K5 Aircraft lighting, as appropriate.

FH.VII.C.K6 Procedures for:

FH.VII.C.K6a a. Pilot activities during taxiing

FH.VII.C.K6b b. Safe air taxi at towered and nontowered airports

FH.VII.C.K6c c. Overflying of runways

FH.VII.C.K7 Height/Velocity (H/V) considerations, as applicable.

FH.VII.C.K8 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VII.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VII.C.R2 Reduced visibility.

FH.VII.C.R3 Runway incursion.

Area of Operation VII. Hovering Maneuvers

FH.VII.C.R4 Main rotor(s), tail rotor, and tail strike hazards, as applicable.

FH.VII.C.R5 H/V diagram performance in case of powerplant failure, as applicable.

FH.VII.C.R6 Confirmation or expectation bias as related to taxi instructions or intentions.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VII.C.S1 Complete the appropriate checklist(s).

FH.VII.C.S2 Use an airport diagram or taxi chart during taxi, if published, and maintain situational awareness.

FH.VII.C.S3 Select a safe airspeed and altitude.

FH.VII.C.S4 Maintain desired track and groundspeed in headwind and crosswind conditions, avoiding conditions that might lead to loss of tail rotor/antitorque effectiveness, as applicable.

FH.VII.C.S5 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VII.C.S6 Comply with airport/heliport/helipad/landing area markings, lights, signs, and ATC instructions.

FH.VII.C.S7 Maintain specified altitude, ±10 feet.

FH.VII.C.S8 Analyze and correct common errors related to this Task.

Area of Operation VII. Hovering Maneuvers › Task D. Taxiing with Wheel-Type Landing Gear

Task D. Taxiing with Wheel-Type Landing Gear

References: R AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands taxiing with wheel-type landing gear, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VII.D.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).

FH.VII.D.K2 Taxi instructions/clearances.

FH.VII.D.K3 Airport/heliport/helipad/landing area, signs, markings, and lighting, or unprepared surface environment.

FH.VII.D.K4 Visual indicators for wind.

FH.VII.D.K5 Aircraft lighting, as appropriate.

FH.VII.D.K6 Procedures for:

FH.VII.D.K6a a. Appropriate flight deck activities prior to taxi, including route planning and identifying the

location of Hot Spots

FH.VII.D.K6b b. Safe taxi at towered and nontowered airports

FH.VII.D.K6c c. Entering or crossing runways

FH.VII.D.K7 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VII.D.R1 Activities and distractions.

Area of Operation VII. Hovering Maneuvers

FH.VII.D.R2 Confirmation or expectation bias as related to taxi instructions or intentions.

FH.VII.D.R3 Runway incursion.

FH.VII.D.R4 Speed during taxi and turns.

FH.VII.D.R5 Appropriate thrust vector and brake use.

FH.VII.D.R6 Airframe and rotor clearances during taxi.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VII.D.S1 Complete the appropriate checklist(s).

FH.VII.D.S2 Use an appropriate airport/heliport diagram or taxi chart, if published.

FH.VII.D.S3 Properly position nosewheel/tailwheel, as applicable, locked or unlocked.

FH.VII.D.S4 Position the flight controls properly for the existing wind conditions, with the landing gear in contact with the surface, avoiding conditions that might lead to loss of directional control.

FH.VII.D.S5 Properly use cyclic, collective or simplified flight controls, and brakes as applicable to control speed while taxiing.

FH.VII.D.S6 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VII.D.S7 Maintain specified track within 4 feet.

FH.VII.D.S8 Position the helicopter-simplified flight controls relative to hold lines or a specified point.

FH.VII.D.S9 Receive and comply with ATC clearances/instructions, if applicable.

FH.VII.D.S10 Comply with airport/heliport taxiway markings, lights, and signals.

FH.VII.D.S11 Analyze and correct common errors related to this Task.

Area of Operation VII. Hovering Maneuvers › Task E. Slope Operations

Task E. Slope Operations

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands slope operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VII.E.K1 Elements related to slope operations.

FH.VII.E.K2 Factors used for selecting an appropriate slope.

FH.VII.E.K3 Effect of wind on slope operations.

FH.VII.E.K4 Dynamic rollover considerations during slope operations and preventive/recovery techniques.

FH.VII.E.K5 Helicopter-Simplified Flight Controls slope limitations.

FH.VII.E.K6 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

Area of Operation VII. Hovering Maneuvers

FH.VII.E.R1 Operations on a slope.

FH.VII.E.R2 Conditions leading to loss of tail rotor/antitorque effectiveness, as applicable.

FH.VII.E.R3 Embarking or disembarking passengers and rotor blade hazards.

FH.VII.E.R4 Conditions leading to dynamic rollover.

FH.VII.E.R5 Surface conditions.

FH.VII.E.R6 Collision hazards.

FH.VII.E.R7 Exceeding the manufacturer's slope limitations.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VII.E.S1 Select a suitable slope.

FH.VII.E.S2 Complete the appropriate checklist(s).

FH.VII.E.S3 Properly approach the slope considering wind effect and obstacles.

FH.VII.E.S4 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VII.E.S5 Maintain heading and ground position and prevent movement of aircraft on slope.

FH.VII.E.S6 Make a smooth positive descent to touch the upslope skid or wheel(s) on the sloping surface.

FH.VII.E.S7 Recognize if slope is too steep and abandon the operation prior to reaching flight control limits.

FH.VII.E.S8 Maintain positive control while lowering the downslope skid or wheel to touchdown.

FH.VII.E.S9 Neutralize controls after landing, as applicable.

FH.VII.E.S10 Make a smooth transition from the slope to a stabilized hover parallel to the slope.

FH.VII.E.S11 Properly move away from the slope.

FH.VII.E.S12 Maintain a specified heading throughout the operation, ±10°.

FH.VII.E.S13 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

Note: N The evaluator must select at least one takeoff and one approach Task from Area of Operation VIII, Takeoffs, Landings, and Go-Arounds.

Note: N Task E will be tested in addition to the other Tasks if the applicant supplies a helicopter with wheel-type landing gear.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task A. Normal Takeoff and Climb

Task A. Normal Takeoff and Climb

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands normal takeoff, climb operations, and rejected takeoff procedures, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.A.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.

FH.VIII.A.K2 Factors affecting the profile of the height/velocity (H/V) diagram, as applicable.

FH.VIII.A.K3 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.A.R1 Selection of takeoff path based on helicopter-simplified flight controls performance and limitations, available distance, and wind.

FH.VIII.A.R2 Effects of:

FH.VIII.A.R2a a. Crosswind

FH.VIII.A.R2b b. Windshear

FH.VIII.A.R2c c. Tailwind

FH.VIII.A.R2d d. Turbulence, including wake turbulence

FH.VIII.A.R2e e. Runway/departure point surface/condition

FH.VIII.A.R3 Abnormal operations, including planning for:

FH.VIII.A.R3a a. Rejected takeoff

FH.VIII.A.R3b b. Powerplant failure in takeoff/climb phase of flight

FH.VIII.A.R4 Collision hazards.

FH.VIII.A.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VIII.A.R6 Runway incursion.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.A.S1 Complete the appropriate checklist(s).

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.A.S2 Make radio calls as appropriate.

FH.VIII.A.S3 Verify assigned/correct runway, if at an airport.

FH.VIII.A.S4 Determine wind direction with or without visible wind direction indicators.

FH.VIII.A.S5 Clear the area, taxi into the takeoff position, and align the helicopter-simplified flight controls on the runway centerline or with takeoff path.

FH.VIII.A.S6 Establish a stationary position on the surface or a stabilized hover prior to takeoff in headwind and crosswind conditions.

FH.VIII.A.S7 Confirm takeoff power and instrument indications prior to forward movement.

FH.VIII.A.S8 After clearing all obstacles, transition to normal climb attitude, airspeed, ±10 knots, and power setting.

FH.VIII.A.S9 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VIII.A.S10 Maintain proper ground track with crosswind correction, as needed.

FH.VIII.A.S11 Comply with noise abatement procedures, as applicable.

FH.VIII.A.S12 Use runway incursion avoidance procedures, if applicable.

FH.VIII.A.S13 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task B. Normal and Crosswind Approach

Task B. Normal and Crosswind Approach

References: R AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands normal and crosswind approach, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.B.K1 Effects of wind, weight, altitude, and temperature on performance.

FH.VIII.B.K2 Wind correction techniques on approach and landing.

FH.VIII.B.K3 Landing surface, obstructions, and selection of a suitable touchdown point.

FH.VIII.B.K4 Factors affecting the profile of the height/velocity (H/V) diagram, as applicable.

FH.VIII.B.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.B.R1 Selection of approach path and landing based on aircraft performance and limitations, and wind.

FH.VIII.B.R2 Effects of:

FH.VIII.B.R2a a. Crosswind

FH.VIII.B.R2b b. Windshear

FH.VIII.B.R2c c. Tailwind

FH.VIII.B.R2d d. Turbulence, including wake turbulence

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.B.R2e e. Vortex ring state (VRS)

FH.VIII.B.R2f f. Touchdown surface and condition

FH.VIII.B.R3 Go-around/rejected landing.

FH.VIII.B.R4 Collision hazards.

FH.VIII.B.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VIII.B.R6 Loss of tail rotor effectiveness (LTE), as applicable.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.B.S1 Complete the appropriate checklist(s).

FH.VIII.B.S2 Make radio calls as appropriate.

FH.VIII.B.S3 Determine wind direction with or without visible wind direction indicators.

FH.VIII.B.S4 Align the helicopter-simplified flight controls with the correct/assigned runway or touchdown point.

FH.VIII.B.S5 Scan the landing area/touchdown point and adjoining area for traffic and obstructions.

FH.VIII.B.S6 Maintain proper ground track with crosswind correction, if necessary.

FH.VIII.B.S7 Establish and maintain a normal approach angle and rate of closure.

FH.VIII.B.S8 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VIII.B.S9 Arrive at the termination point, on the surface or at a stabilized hover, ±4 feet.

FH.VIII.B.S10 Use runway incursion avoidance procedures, if applicable.

FH.VIII.B.S11 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task C. Maximum Performance Takeoff and Climb

Task C. Maximum Performance Takeoff and Climb

References: R AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands maximum performance takeoff and climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.C.K1 Situations where this maneuver is appropriate.

FH.VIII.C.K2 Effects of atmospheric conditions, including wind and temperature, on takeoff and climb performance.

FH.VIII.C.K3 Powerplant failure during approach/landing phase of flight.

FH.VIII.C.K4 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.C.R1 Selection of takeoff path based on helicopter-simplified flight controls performance and limitations, available distance, and wind.

FH.VIII.C.R2 Effects of:

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.C.R2a a. Crosswind

FH.VIII.C.R2b b. Windshear

FH.VIII.C.R2c c. Tailwind

FH.VIII.C.R2d d. Turbulence, including wake turbulence

FH.VIII.C.R2e e. Surface conditions

FH.VIII.C.R3 Abnormal operations including:

FH.VIII.C.R3a a. Rejected takeoff

FH.VIII.C.R3b b. Powerplant failure in takeoff/climb phase of flight

FH.VIII.C.R4 Collision hazards.

FH.VIII.C.R5 Low rotor rpm, as applicable.

FH.VIII.C.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.C.S1 Complete the appropriate checklist(s).

FH.VIII.C.S2 Make radio calls as appropriate.

FH.VIII.C.S3 Use control inputs to initiate lift-off from the takeoff position using a forward climb attitude to fly the departure profile.

FH.VIII.C.S4 Maintain powerplant and rotor rpm within normal limits.

FH.VIII.C.S5 Use required takeoff power, or power as specified by the evaluator.

FH.VIII.C.S6 After clearing all obstacles, transition to normal climb attitude, airspeed, ±5 knots, and power setting.

FH.VIII.C.S7 Maintain directional control, ground track, and proper wind-drift correction throughout the maneuver.

FH.VIII.C.S8 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task D. Steep Approach

Task D. Steep Approach

References: R AIM; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands steep approaches, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.D.K1 A stabilized steep approach.

FH.VIII.D.K2 Approach techniques and applicability.

FH.VIII.D.K3 Performance data and the height velocity (H/V) diagram, as applicable.

FH.VIII.D.K4 Effects of atmospheric conditions on approach and landing performance.

FH.VIII.D.K5 Wind correction techniques.

FH.VIII.D.K6 Aircraft performance and limitations.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.D.K7 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.D.R1 Selection of approach path and landing based on aircraft performance and limitations, and wind.

FH.VIII.D.R2 Effects of:

FH.VIII.D.R2a a. Wind Direction

FH.VIII.D.R2b b. Windshear

FH.VIII.D.R2c c. Turbulence, including wake turbulence

FH.VIII.D.R3 Planning for:

FH.VIII.D.R3a a. Rejected landing and go-around

FH.VIII.D.R3b b. Powerplant failure during the approach

FH.VIII.D.R4 Collision hazards.

FH.VIII.D.R5 Vortex ring state (VRS).

FH.VIII.D.R6 Landing surface.

FH.VIII.D.R7 Aircraft limitations.

FH.VIII.D.R8 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VIII.D.R9 Loss of tail rotor effectiveness (LTE), as applicable.

FH.VIII.D.R10 Degraded Visual Environment (DVE) and flat light conditions.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.D.S1 Complete the appropriate checklist(s).

FH.VIII.D.S2 Make radio calls as appropriate.

FH.VIII.D.S3 Consider the wind direction and conditions, landing surface, and obstacles.

FH.VIII.D.S4 Select a suitable termination point.

FH.VIII.D.S5 Establish and maintain a steep approach angle, (15° maximum) and proper rate of closure.

FH.VIII.D.S6 Maintain proper ground track with crosswind correction, if necessary.

FH.VIII.D.S7 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VIII.D.S8 Arrive at the termination point, on the surface or at a stabilized hover, ±4 feet.

FH.VIII.D.S9 Use runway incursion avoidance procedures, if applicable.

FH.VIII.D.S10 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task E. Rolling Takeoff (Wheel-Type Landing Gear)

Task E. Rolling Takeoff (Wheel-Type Landing Gear)

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands rolling takeoff with wheel-type landing gear, can apply that

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.E.K1 Elements of a rolling takeoff.

FH.VIII.E.K2 Effects of wind, weight, temperature, and density altitude.

FH.VIII.E.K3 Situations when a rolling takeoff is recommended and factors related to takeoff and climb performance.

FH.VIII.E.K4 Translational lift.

FH.VIII.E.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.E.R1 Selection of takeoff path based on helicopter-simplified flight controls performance and limitations, available distance, and wind.

FH.VIII.E.R2 Effects of:

FH.VIII.E.R2a a. Wind Direction

FH.VIII.E.R2b b. Windshear

FH.VIII.E.R2c c. Turbulence, including wake turbulence

FH.VIII.E.R3 Planning for:

FH.VIII.E.R3a a. Height/Velocity (H/V) considerations, as applicable

FH.VIII.E.R3b b. Rejected takeoff

FH.VIII.E.R3c c. Powerplant failure during takeoff/climb phase of flight

FH.VIII.E.R4 Collision hazards.

FH.VIII.E.R5 Takeoff surface.

FH.VIII.E.R6 Landing gear.

FH.VIII.E.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.E.S1 Complete the appropriate checklist(s).

FH.VIII.E.S2 Make radio calls as appropriate.

FH.VIII.E.S3 Determine wind direction with or without visible wind direction indicators.

FH.VIII.E.S4 Verify assigned/correct takeoff path.

FH.VIII.E.S5 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.VIII.E.S6 Use control inputs that initiate the takeoff roll.

FH.VIII.E.S7 Maintain proper ground track with crosswind correction, while accelerating.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.E.S8 Transition to a normal climb airspeed, ±10 knots, and set appropriate power.

FH.VIII.E.S9 Maintain proper ground track with crosswind correction after liftoff.

FH.VIII.E.S10 Use runway incursion avoidance procedures, if applicable.

FH.VIII.E.S11 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task F. Shallow Approach and Running/Roll-On Landing

Task F. Shallow Approach and Running/Roll-On Landing

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands shallow approach and running/roll-on landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.F.K1 Elements related to shallow approach and running/roll-on landing, including when to use the maneuver, aircraft limitations, and effect of landing surface texture.

FH.VIII.F.K2 Effects of wind, weight, temperature, and density altitude.

FH.VIII.F.K3 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.F.R1 Selection of approach path and landing based on aircraft performance and limitations, and wind.

FH.VIII.F.R2 Effects of:

FH.VIII.F.R2a a. Wind Direction

FH.VIII.F.R2b b. Windshear

FH.VIII.F.R2c c. Turbulence, including wake turbulence

FH.VIII.F.R3 Planning for:

FH.VIII.F.R3a a. Powerplant failure during approach/landing phase of flight

FH.VIII.F.R4 Collision hazards.

FH.VIII.F.R5 Landing surface.

FH.VIII.F.R6 Dynamic rollover.

FH.VIII.F.R7 Ground resonance, as applicable.

FH.VIII.F.R8 Aircraft limitations.

FH.VIII.F.R9 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.F.S1 Complete the appropriate checklist(s).

FH.VIII.F.S2 Make radio calls as appropriate.

FH.VIII.F.S3 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds

FH.VIII.F.S4 Establish and maintain the recommended approach angle, and proper rate of closure.

FH.VIII.F.S5 Determine wind direction and maintain ground track with crosswind correction.

FH.VIII.F.S6 Maintain effective translational lift during surface contact with landing gear parallel to the ground track.

FH.VIII.F.S7 Make smooth, timely, and correct control inputs after surface contact to maintain directional control.

FH.VIII.F.S8 Use runway incursion avoidance procedures, if applicable.

FH.VIII.F.S9 Analyze and correct common errors related to this Task.

Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task G. Go-Around

Task G. Go-Around

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands go-around with emphasis on factors that contribute to landing conditions that may require a go-around, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.VIII.G.K1 Situations and considerations on approach that could require a go-around.

FH.VIII.G.K2 Effects of atmospheric conditions on a go-around.

FH.VIII.G.K3 Go-around procedures and the importance of a timely decision.

FH.VIII.G.K4 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.VIII.G.R1 Recognition of the need for a go-around.

FH.VIII.G.R2 Application of power and flight control inputs.

FH.VIII.G.R3 Collision hazards.

FH.VIII.G.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.VIII.G.R5 Runway incursion.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.VIII.G.S1 Make a timely decision to discontinue the approach or at the direction of the evaluator.

FH.VIII.G.S2 Maintain powerplant and rotor rpm within normal limits while applying proper control input to stop descent and initiate climb.

FH.VIII.G.S3 Transition to a positive rate of climb and appropriate airspeed of ±10 knots.

FH.VIII.G.S4 Maintain directional control, ground track, and proper wind-drift correction throughout the maneuver.

FH.VIII.G.S5 Notify/coordinate with air traffic control (ATC) or evaluator instructions as required.

FH.VIII.G.S6 Complete the appropriate checklist(s).

FH.VIII.G.S7 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.

FH.VIII.G.S8 Use runway incursion avoidance procedures, if applicable.

FH.VIII.G.S9 Analyze and correct common errors related to this Task.

Area of Operation IX. Fundamentals of Flight › Task A. Straight-and-Level Flight

Area of Operation IX. Fundamentals of Flight

Area of Operation IX. Fundamentals of Flight

Note: N The evaluator must select at least one Task from this Area of Operation.

Task A. Straight-and-Level Flight

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands straight-and-level flight, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.IX.A.K1 Basic elements of the aircraft and aerodynamics that affect the ability to maintain straight-and-level flight.

FH.IX.A.K2 Flight control and trim use, as applicable.

FH.IX.A.K3 The pilot's visual references when performing the maneuver.

FH.IX.A.K4 Integrated flight instruction.

FH.IX.A.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.IX.A.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.IX.A.R2 Collision hazards.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.IX.A.S1 Establish and maintain straight-and-level flight.

FH.IX.A.S2 Analyze and correct common errors related to this Task.

Area of Operation IX. Fundamentals of Flight › Task B. Level Turns

Task B. Level Turns

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands level turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.IX.B.K1 Purpose of and procedures for level turns.

FH.IX.B.K2 Flight control and trim use, as applicable.

FH.IX.B.K3 The pilot's visual references when performing the maneuver.

FH.IX.B.K4 Integrated flight instruction.

FH.IX.B.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

Area of Operation IX. Fundamentals of Flight

FH.IX.B.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.IX.B.R2 Collision hazards.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.IX.B.S1 Establish, maintain, and roll out of a level turn.

FH.IX.B.S2 Analyze and correct common errors related to this Task.

Area of Operation IX. Fundamentals of Flight › Task C. Straight Climbs and Climbing Turns

Task C. Straight Climbs and Climbing Turns

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands straight climbs and climbing turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.IX.C.K1 Purpose of and procedures for straight climbs and climbing turns.

FH.IX.C.K2 Flight control and trim use, as applicable.

FH.IX.C.K3 The pilot's visual references when performing the maneuver.

FH.IX.C.K4 Integrated flight instruction.

FH.IX.C.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.IX.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.IX.C.R2 Collision hazards.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.IX.C.S1 Establish, maintain, and level off from climbs and climbing turns.

FH.IX.C.S2 Analyze and correct common errors related to this Task.

Area of Operation IX. Fundamentals of Flight › Task D. Straight Descents and Descending Turns

Task D. Straight Descents and Descending Turns

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25

Objective: O To determine the applicant understands straight descents and descending turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.IX.D.K1 Purpose of and procedures for straight descents and descending turns.

FH.IX.D.K2 Flight control and trim use, as applicable.

FH.IX.D.K3 The pilot's visual references when performing the maneuver.

FH.IX.D.K4 Integrated flight instruction.

Area of Operation IX. Fundamentals of Flight

FH.IX.D.K5 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.IX.D.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.

FH.IX.D.R2 Collision hazards.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.IX.D.S1 Establish, maintain, and level off from straight descents and descending turns.

FH.IX.D.S2 Analyze and correct common errors related to this Task.

Area of Operation X. Performance Maneuvers › Task A. Rapid Deceleration/Quick Stop

Area of Operation X. Performance Maneuvers

Area of Operation X. Performance Maneuvers

Note: N The evaluator must select at least Task B or C from Area of Operation X, Performance Maneuvers in accordance with the aircraft's operating characteristics.

Task A. Rapid Deceleration/Quick Stop

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands rapid deceleration/quick stop, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.X.A.K1 Purpose of the maneuver.

FH.X.A.K2 Effects of atmospheric conditions on a rapid deceleration/quick stop.

FH.X.A.K3 Wind correction techniques during rapid deceleration/quick stop.

FH.X.A.K4 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.X.A.R1 Recognition of the need for a rapid deceleration/quick stop.

FH.X.A.R2 Powerplant and rotor(s) management.

FH.X.A.R3 Vortex ring state (VRS).

FH.X.A.R4 Collision hazards.

FH.X.A.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.X.A.S1 Complete the appropriate checklist(s).

FH.X.A.S2 Maintain powerplant and main rotor(s) (Nr) speed within normal limits.

FH.X.A.S3 Coordinate all simplified flight controls, as applicable, throughout the execution of the maneuver to terminate in a hover at an appropriate hover height.

FH.X.A.S4 Maintain an altitude that permits safe clearance between the tail boom and the surface, as applicable.

FH.X.A.S5 Maintain heading throughout the maneuver, ±10°.

FH.X.A.S6 Analyze and correct common errors related to this Task.

Area of Operation X. Performance Maneuvers › Task B.

Task B. Straight-In Autorotation in a Single-Engine Helicopter-Simplified Flight Controls

References: R AC 61-65, AC 61-140; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands straight-in autorotation with a power recovery or touchdown to the surface, as briefed prior to the maneuver, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements &

Area of Operation X. Performance Maneuvers

Limitations for information related to this Task.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.X.B.K1 Elements related to straight-in autorotation.

FH.X.B.K2 Effects of wind, weight, temperature, and density altitude.

FH.X.B.K3 Main rotor (Nr) speed.

FH.X.B.K4 Energy management.

FH.X.B.K5 Causes and effects of high descent rates.

FH.X.B.K6 Effect of varying bank angles, airspeeds, and rotor rpm.

FH.X.B.K7 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.X.B.R1 Low entry altitudes.

FH.X.B.R2 Flight control inputs.

FH.X.B.R3 Turbulence, including wake turbulence.

FH.X.B.R4 Windshear.

FH.X.B.R5 Exchange of simplified flight controls during an intervention.

FH.X.B.R6 Main rotor (Nr) speed.

FH.X.B.R7 Energy management.

FH.X.B.R8 Low rotor rpm or rotor stall, as applicable.

FH.X.B.R9 Main rotor(s) (Nr) overspeed.

FH.X.B.R10 Excessive rate of descent.

FH.X.B.R11 Powerplant failure during the maneuver.

FH.X.B.R12 Collision hazards.

FH.X.B.R13 Terminating an autorotation.

FH.X.B.R14 Power recovery and go-around.

FH.X.B.R15 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.X.B.S1 Complete the appropriate checklist(s).

FH.X.B.S2 Make radio calls as appropriate.

FH.X.B.S3 Select a suitable landing area.

FH.X.B.S4 Clear the area.

FH.X.B.S5 Select an appropriate entry altitude.

Area of Operation X. Performance Maneuvers

FH.X.B.S6 Initiate the maneuver at the proper point.

FH.X.B.S7 Establish power-off glide with the helicopter-simplified flight controls trimmed and autorotation airspeed, ±10 knots.

FH.X.B.S8 Maintain main rotor(s) (Nr) within normal limits.

FH.X.B.S9 Compensate for wind speed and direction as necessary to avoid undershooting or overshooting the selected landing area.

FH.X.B.S10 Use proper deceleration and collective pitch application, or simplified flight controls that permit safe clearance between the aircraft tail boom and the surface, as applicable.

FH.X.B.S11 Initiate proper power recovery, or touchdown to the surface as briefed by the evaluator.

FH.X.B.S12 Terminate autorotation to a stabilized hover within 200 feet of a designated point.

FH.X.B.S13 Analyze and correct common errors related to this Task.

Area of Operation X. Performance Maneuvers › Task C. Autorotation with Turns in a Single-Engine Helicopter

Task C. Autorotation with Turns in a Single-Engine Helicopter

References: R AC 61-65, AC 61-140; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands autorotation with turns with a power recovery or touchdown to the surface, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.X.C.K1 Elements related to autorotation with turns.

FH.X.C.K2 Effects of wind, weight, temperature, and density altitude.

FH.X.C.K3 Various rotor systems and their effects on autorotation.

FH.X.C.K4 Main rotor (Nr) speed.

FH.X.C.K5 Energy management.

FH.X.C.K6 Causes and effects of high descent rates.

FH.X.C.K7 Effect of varying bank angles, airspeeds, and rotor rpm.

FH.X.C.K8 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.X.C.R1 Low entry altitudes.

FH.X.C.R2 Flight control inputs.

FH.X.C.R3 Turbulence, including wake turbulence.

FH.X.C.R4 Windshear.

FH.X.C.R5 Energy management.

Area of Operation X. Performance Maneuvers

FH.X.C.R6 Main rotor(s) (Nr) overspeed.

FH.X.C.R7 Low rotor rpm or rotor stall, as applicable.

FH.X.C.R8 Excessive rate of descent.

FH.X.C.R9 Powerplant failure during the maneuver.

FH.X.C.R10 Rolling out of the turn.

FH.X.C.R11 Collision hazards.

FH.X.C.R12 Terminating an autorotation.

FH.X.C.R13 Power recovery and go-around.

FH.X.C.R14 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.X.C.S1 Complete the appropriate checklist(s).

FH.X.C.S2 Make radio calls as appropriate.

FH.X.C.S3 Select a suitable landing area.

FH.X.C.S4 Clear the area.

FH.X.C.S5 Select an appropriate entry altitude.

FH.X.C.S6 Initiate the maneuver at the proper point.

FH.X.C.S7 Establish power-off glide with the aircraft properly trimmed and autorotation airspeed, ±10 knots.

FH.X.C.S8 Maintain main rotor(s) (Nr) within normal limits.

FH.X.C.S9 Compensate for wind speed and direction as necessary to avoid undershooting or overshooting the selected landing area.

FH.X.C.S10 Roll out no lower than 300 feet above ground level (AGL) along the flight path to the selected landing area.

FH.X.C.S11 Use proper deceleration and collective pitch application, or simplified flight controls that permit safe clearance between the aircraft tail boom and the surface, as applicable.

FH.X.C.S12 Initiate proper power recovery, or touchdown to the surface as briefed by the evaluator.

FH.X.C.S13 Terminate autorotation to a stabilized hover, or to the surface within 200 feet of a designated point as briefed by the evaluator.

FH.X.C.S14 Analyze and correct common errors related to this Task.

Area of Operation XI. Emergency Operations

Area of Operation XI. Emergency Operations

Area of Operation XI. Emergency Operations

Note: N The evaluator must test at least one Task from Tasks A through E. The evaluator must also select at least one Task from Tasks F through K, which are tested orally only. Select all applicable tasks in accordance with the aircraft's operating characteristics.

Area of Operation XI. Emergency Operations › Task A.

Task A. Powerplant Failure in a Hover in a Single-Engine Helicopter-Simplified Flight Controls

References: R FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands power failure in a ground effect hover, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N See Appendix 2: Safety of Flight.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.XI.A.K1 Elements related to powerplant failure in a hover, including energy management concepts.

FH.XI.A.K2 Effects of wind, weight, temperature, and density altitude.

FH.XI.A.K3 High and low inertia of rotor systems, as applicable.

FH.XI.A.K4 Aerodynamics associated with powerplant failure in a hover.

FH.XI.A.K5 Proper orientation, division of attention, and proper planning.

FH.XI.A.K6 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.XI.A.R1 Powerplant failure in a hover.

FH.XI.A.R2 Flight control inputs.

FH.XI.A.R3 Aircraft movement.

FH.XI.A.R4 Dynamic rollover.

FH.XI.A.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.XI.A.S1 Complete the appropriate checklist(s).

FH.XI.A.S2 Make radio calls as appropriate.

FH.XI.A.S3 Clear the area.

FH.XI.A.S4 Select a suitable landing area.

FH.XI.A.S5 Establish a stationary or forward hover into the wind.

FH.XI.A.S6 Simulate powerplant failure.

FH.XI.A.S7 Maintain a heading, ±10°, throughout the maneuver.

FH.XI.A.S8 Touchdown with minimum sideward movement and no rearward movement.

FH.XI.A.S9 Use appropriate simplified flight control inputs to cushion the touchdown.

Area of Operation XI. Emergency Operations

FH.XI.A.S10 After touchdown, lower collective or neutralize simplified flight controls, as applicable.

FH.XI.A.S11 Analyze and correct common errors related to this Task.

Area of Operation XI. Emergency Operations › Task B.

Task B. Powerplant Failure at Altitude in a Single-Engine Helicopter-Simplified Flight Controls

References: R AC 61-140; FAA-H-8083-2, FAA-H-8083-4, FAA-H-8083-9, FAA-H-8083-21, FAA-H-8083-25; POH/RFM

Objective: O To determine the applicant understands power failure at altitude, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.

Note: N See Appendix 2: Safety of Flight and Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.

Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:

FH.XI.B.K1 Elements of a powerplant failure at altitude.

FH.XI.B.K2 Effects of wind, weight, temperature, and density altitude.

FH.XI.B.K3 Main rotor (Nr) speed.

FH.XI.B.K4 Energy management.

FH.XI.B.K5 Causes and effects of high descent rates.

FH.XI.B.K6 Effect of varying bank angles, airspeeds, and rotor rpm.

FH.XI.B.K7 Common errors related to this Task.

Risk Management: The applicant explains and teaches how to identify and manage risk associated with:

FH.XI.B.R1 Low entry altitudes.

FH.XI.B.R2 Selection of landing area.

FH.XI.B.R3 Flight control inputs.

FH.XI.B.R4 Turbulence, including wake turbulence.

FH.XI.B.R5 Windshear.

FH.XI.B.R6 Low rotor rpm or rotor stall, as applicable.

FH.XI.B.R7 Powerplant failure during the maneuver.

FH.XI.B.R8 Collision hazards.

FH.XI.B.R9 Autorotation power-off never-exceed speed (VNE) limitation, as applicable.

FH.XI.B.R10 Helicopter-Simplified Flight Controls trim, as applicable.

FH.XI.B.R11 Distractions, task prioritization, loss of situational awareness, or disorientation.

Skills: The applicant demonstrates and simultaneously explains how to:

FH.XI.B.S1 Establish an autorotation.

FH.XI.B.S2 Establish power-off glide with the helicopter-simplified flight controls trimmed and autorotation airspeed, ±10 knots.

Area of Operation XI. Emergency Operations

FH.XI.B.S3 Maintain main rotor(s) (Nr) within normal limits.

Continue reading ↓ 120 of 192 passages shown