FAA-S-ACS-27 Flight Instructor for Powered-Lift Category Airman Certification Standards
Flight Instructor for Powered-Lift Category
Airman Certification Standards
FAA-S-ACS-27
Flight Standards Service
Washington, DC 20591
November 2023
Flight Instructor for Powered-Lift Category ACS (FAA-S-ACS-27) i
Foreword
The U.S. Department of Transportation, Federal Aviation Administration (FAA), Office of Safety Standards, Regulatory Support Division, Airman Testing Standards Branch, has published the Flight Instructor for Powered-Lift Category Airman Certification Standards (ACS) to communicate the aeronautical knowledge, risk management, and flight proficiency standards for the Flight Instructor Certificate in the powered-lift category.
This ACS is available for download, in PDF format, from www.faa.gov.
Comments regarding this ACS may be emailed to [email protected].
The FAA created FAA-G-ACS-2, Airman Certification Standards Companion Guide for Pilots, to provide guidance considered relevant and useful to the community. The number of appendices in the ACS was reduced and much of the non-regulatory material was moved to the Airman Certification Standards Companion Guide for Pilots. Applicants, instructors, and evaluators should consult this companion guide to familiarize themselves with ACS procedures. FAA-G-ACS-2 is available for download, in PDF format, from www.faa.gov.
ii Flight Instructor for Powered-Lift Category ACS (FAA-S-ACS-27)
Table of Contents Introduction
Airman Certification Standards Concept … 1 Use of the Term “Flight Manual” … 1
Area of Operation I. Fundamentals of Instructing
Task A. Effects of Human Behavior and Communication on the Learning Process … 2 Task B. Learning Process … 3 Task C. Course Development, Lesson Plans, and Classroom Training Techniques … 4 Task D. Student Evaluation, Assessment, and Testing … 5 Task E. Elements of Effective Teaching in a Professional Environment … 6 Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention … 7
Area of Operation II. Technical Subject Areas
Task A. Human Factors … 9 Task B. Visual Scanning and Collision Avoidance … 10 Task C. Runway Incursion Avoidance … 10 Task D. Principles of Flight … 11 Task E. Flight Controls and Systems … 12 Task F. Performance and Limitations … 13 Task G. National Airspace System … 14 Task H. Navigation Systems and Radar Services … 14 Task I. Navigation and Cross-Country Flight Planning … 15 Task J. 14 CFR and Publications … 16 Task K. Endorsements and Logbook Entries … 17 Task L. Night Operations … 18 Task M. High Altitude Operations - Supplemental Oxygen … 18 Task N. High Altitude Operations - Pressurization … 19
Area of Operation III. Preflight Preparation
Task A. Pilot Qualifications … 21 Task B. Airworthiness Requirements … 21 Task C. Weather Information … 22
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Task A. Maneuver Lesson … 24
Area of Operation V. Preflight Procedures
Task A. Preflight Assessment … 25 Task B. Flight Deck Management … 25 Task C. Powerplant Starting … 26
iii
Table of Contents
Task D. Ground Taxiing … 27 Task E. Before Takeoff Check … 28
Area of Operation VI. Airport and Heliport Operations
Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting … 30 Task B. Communications, Light Signals, and Runway Lighting Systems … 30 Task C. Traffic Patterns … 31
Area of Operation VII. Hovering Maneuvers
Task A. Vertical Takeoff and Landing … 33 Task B. Hover Taxi … 34 Task C. Air Taxi … 35
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
Task A. Normal Takeoff and Climb from a Hover … 37 Task B. Rolling Takeoff and Climb … 38 Task C. Maximum Performance Takeoff and Climb … 39 Task D. Normal Approach to a Hover … 40 Task E. Normal Approach and Landing … 42 Task F. Steep Approach and Landing … 43 Task G. Running/Roll-On Landing … 44 Task H. Go-Around/Rejected Landing … 45
Area of Operation IX. Fundamentals of Flight
Task A. Straight-and-Level Flight … 47 Task B. Level Turns … 47 Task C. Straight Climbs and Climbing Turns … 48 Task D. Straight Descents and Descending Turns … 48
Area of Operation X. Performance Maneuvers
Task A. Rapid Deceleration/Quick Stop … 50 Task B. Inflight Conversion During Straight-and-Level Flight … 51 Task C. Steep Turns … 52
Area of Operation XI. Ground Reference Maneuvers
Task A. Ground Reference Maneuvers … 53
Area of Operation XII. Slow Flight and Stalls
Task A. Maneuvering During Slow Flight (Wing-Borne Configuration) … 55 Task B. Power-Off Stalls … 56 Task C. Power-On Stalls … 57
iv
Table of Contents
Task D. Accelerated Stalls … 58
Area of Operation XIII. Basic Instrument Maneuvers
Task A. Straight-and-Level Flight … 60 Task B. Constant Airspeed Climbs … 60 Task C. Constant Airspeed Descents … 61 Task D. Turns to Headings … 62
Area of Operation XIV. Emergency Operations
Task A. Powerplant(s) Failure (Simulated) during Takeoff in Thrust-Borne Flight … 64 Task B. Powerplant(s) Failure (Simulated) during Takeoff While in Semi-Wing-Borne Flight … 65 Task C. Inflight Powerplant(s) Failure and Restart in Multi-Powerplant Aircraft … 66 Task D. Vortex Ring State (VRS) Avoidance … 67 Task E. Approach and Landing with Powerplant(s) Failure (Simulated) … 68
Task F. Emergency Descent … 69 Task G. Emergency Equipment and Survival Gear … 70 Task H. Systems and Equipment Malfunctions … 70 Task I. Dynamic Rollover … 71 Task J. Recovery from Unusual Flight Attitudes … 72
Area of Operation XV. Special Operations
Task A. Confined Area Operations … 74 Task B. Slope Operations … 75 Task C. Pinnacle Operations … 76
Area of Operation XVI. Postflight Procedures
Task A. After Landing, Parking, and Securing … 79
Appendix 1: Practical Test Roles, Responsibilities, and Outcomes
Eligibility Requirements for a Flight Instructor Certificate … 80 Use of the ACS During a Practical Test … 80 Instructor Responsibilities … 81 Evaluator Responsibilities … 81 Possible Outcomes of the Test … 82 Letter of Discontinuance … 83 Time Limit and Credit after a Discontinued Practical Test … 83 Additional Rating Task Table … 83 Addition of a Powered-Lift Rating to an Existing Flight Instructor Certificate … 84 Flight Instructor Renewal/Reinstatement … 85
v
Table of Contents
Appendix 2: Safety of Flight
General … 86 Stall, Spin, Angle of Attack Awareness … 86 Use of Checklists … 86 Positive Exchange of Flight Controls … 86 Use of Distractions … 86 Aeronautical Decision-Making, Risk Management, Crew Resource Management, and Single-Pilot
Resource Management … 86 Multi-Powerplant Considerations … 87
Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations
Aircraft Requirements & Limitations … 88 Equipment Requirements & Limitations … 88 Use of Flight Simulation Training Devices (FSTD) … 88 Credit for Pilot Time in an FSTD … 88 Use of Aviation Training Devices (ATD) … 88 Credit for Pilot Time in an ATD … 88 Operational Requirements, Limitations, & Task Information … 89
1 Flight Instructor for Powered-Lift Category ACS (FAA-S-ACS-27)
Introduction › Airman Certification Standards Concept
Introduction
Airman Certification Standards Concept
The goal of the airman certification process is to ensure the applicant possesses the knowledge, ability to manage risks, and skill consistent with the privileges of the certificate or rating being exercised, in order to act as pilot-in-command (PIC).
Safe operations in today’s National Airspace System (NAS) require the integration of aeronautical knowledge, risk management, and flight proficiency standards. To accomplish these goals, the FAA drew upon the expertise of organizations and individuals across the aviation and training community to develop the ACS. The ACS integrates the elements of knowledge, risk management, and skill required for each airman certificate or rating. It thus forms a more comprehensive standard for what an applicant must know, consider, and do to demonstrate proficiency to pass the tests required for issuance of the applicable airman certificate or rating.
Introduction › Use of the Term “Flight Manual”
Use of the Term “Flight Manual”
Throughout this document, the term “flight manual” refers to the approved powered-lift aircraft flight manual.
Area of Operation I. Fundamentals of Instructing
Area of Operation I. Fundamentals of Instructing
Note: The evaluator must select Task E, Task F, and at least one other Task for initial flight instructor applicants. During a practical test for an added flight instructor rating or flight instructor reinstatement, the evaluator has discretion to evaluate the applicant on Fundamentals of Instructing.
Area of Operation I. Fundamentals of Instructing › Task A.
Task A. Effects of Human Behavior and Communication on the Learning Process
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands human behavior and effective communication, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.A.K1 Elements of human behavior, including:
FI.I.A.K1a a. Definitions of human behavior
FI.I.A.K1b b. Instructor and learner relationship
FI.I.A.K1c c. Motivation
FI.I.A.K1d d. Human needs
FI.I.A.K1e e. Defense mechanisms
FI.I.A.K2 Learner emotional reactions, including:
FI.I.A.K2a a. Anxiety and stress
FI.I.A.K2b b. Impatience
FI.I.A.K2c c. Worry or lack of interest
FI.I.A.K2d d. Physical discomfort, illness, fatigue, and dehydration
FI.I.A.K2e e. Apathy due to inadequate instruction
FI.I.A.K3 Teaching the adult learner.
FI.I.A.K4 Effective communication, including:
FI.I.A.K4a a. Basic elements of communication
FI.I.A.K4b b. Barriers to effective communication
FI.I.A.K4c c. Developing communication skills
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.A.R1 Recognizing and accommodating human behavior.
FI.I.A.R2 Barriers to communication.
Skills: The applicant exhibits the skill to:
FI.I.A.S1 Give examples of how human behavior affects motivation and learning.
FI.I.A.S2 Describe what the instructor can do to deal with:
FI.I.A.S2a a. Serious abnormal emotional behavior
Area of Operation I. Fundamentals of Instructing
FI.I.A.S2b b. Defense mechanisms
FI.I.A.S3 Use effective communication in ground and flight instruction.
Area of Operation I. Fundamentals of Instructing › Task B. Learning Process
Task B. Learning Process
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands the learning process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.B.K1 Definitions of learning.
FI.I.B.K2 Learning theory as it applies to ground and flight instruction, including:
FI.I.B.K2a a. Behaviorism
FI.I.B.K2b b. Cognitive Theory
FI.I.B.K3 Perceptions and insight.
FI.I.B.K4 Acquiring knowledge.
FI.I.B.K5 Laws of learning.
FI.I.B.K6 Domains of learning, including:
FI.I.B.K6a a. Cognitive
FI.I.B.K6b b. Affective
FI.I.B.K6c c. Psychomotor
FI.I.B.K7 Characteristics of learning.
FI.I.B.K8 Scenario-based training (SBT).
FI.I.B.K9 Acquiring skill knowledge, including:
FI.I.B.K9a a. Stages
FI.I.B.K9b b. Knowledge of results
FI.I.B.K9c c. How to develop skills
FI.I.B.K9d d. Learning plateaus
FI.I.B.K10 Types of practice.
FI.I.B.K11 Evaluation versus critique.
FI.I.B.K12 Distractions, interruptions, fixation, and inattention.
FI.I.B.K13 Errors.
FI.I.B.K14 Memory, including:
FI.I.B.K14a a. Sensory
FI.I.B.K14b b. Short-Term Memory (STM) and Long-Term Memory (LTM)
Area of Operation I. Fundamentals of Instructing
FI.I.B.K14c c. How usage affects memory
FI.I.B.K14d d. Forgetting
FI.I.B.K15 Retention of learning.
FI.I.B.K16 Transfer of learning.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.B.R1 Inadequate or incomplete instruction.
FI.I.B.R2 Lack of learner motivation.
FI.I.B.R3 Recognizing and correcting learner errors.
Skills: The applicant exhibits the skill to:
FI.I.B.S1 Apply educational theories to ground and flight instruction.
FI.I.B.S2 Recognize and correct conditions that undermine the learning process.
FI.I.B.S3 Plan for and use techniques, including realistic distractions that teach flight students how to manage a workload.
Area of Operation I. Fundamentals of Instructing › Task C.
Task C. Course Development, Lesson Plans, and Classroom Training Techniques
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands the teaching process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.C.K1 Teaching, including:
FI.I.C.K1a a. Process
FI.I.C.K1b b. Essential skills
FI.I.C.K2 Course of training.
FI.I.C.K3 Preparation of a lesson, including:
FI.I.C.K3a a. Training objectives and completion standards
FI.I.C.K3b b. Performance-based objectives
FI.I.C.K3c c. Importance of Airman Certification Standards (ACS) in aviation training curricula
FI.I.C.K3d d. Decision-based objectives
FI.I.C.K4 Organization of material.
FI.I.C.K5 Training delivery methods, including:
FI.I.C.K5a a. Lecture
FI.I.C.K5b b. Discussion
FI.I.C.K5c c. Guided discussion
Area of Operation I. Fundamentals of Instructing
FI.I.C.K5d d. Cooperative or group learning
FI.I.C.K5e e. Demonstration-performance
FI.I.C.K5f f. Drill and practice
FI.I.C.K6 Electronic learning (e-Learning).
FI.I.C.K7 Instructional aids and training technologies, including:
FI.I.C.K7a a. Characteristics of effective instructional aids
FI.I.C.K7b b. Reasons for use
FI.I.C.K7c c. Guidelines for use
FI.I.C.K7d d. Types
FI.I.C.K8 Integrated flight instruction.
FI.I.C.K9 Problem-based instruction.
FI.I.C.K10 Planning instructional activity, including:
FI.I.C.K10a a. Blocks of learning
FI.I.C.K10b b. Training syllabus
FI.I.C.K10c c. Lesson plans
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.C.R1 Selection of teaching method.
Skills: The applicant exhibits the skill to:
FI.I.C.S1 Prepare an instructional lesson plan using teaching methods and materials appropriate for Task and learner characteristics, including:
FI.I.C.S1a a. Aeronautical knowledge ground lesson applicable for a classroom
FI.I.C.S1b b. Maneuver introduction and ground lesson
Area of Operation I. Fundamentals of Instructing › Task D. Student Evaluation, Assessment, and Testing
Task D. Student Evaluation, Assessment, and Testing
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands evaluation and testing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.D.K1 Purpose and characteristics of effective assessment.
FI.I.D.K2 Traditional assessments.
FI.I.D.K3 Authentic assessments, including:
FI.I.D.K3a a. Learner-centered assessment
FI.I.D.K3b b. Maneuver or procedure grades
Area of Operation I. Fundamentals of Instructing
FI.I.D.K3c c. Assessing risk management skills
FI.I.D.K4 Choosing an effective assessment method.
FI.I.D.K5 Purposes and types of critiques.
FI.I.D.K6 Oral assessment, including:
FI.I.D.K6a a. Characteristics of effective questions
FI.I.D.K6c b. Answering learner questions
FI.I.D.K6b c. Types of questions to avoid
FI.I.D.K7 Assessment of piloting ability.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.D.R1 Delivering an assessment.
Skills: The applicant exhibits the skill to:
FI.I.D.S1 Use appropriate methods and techniques to assess learner performance in ground or flight training.
Area of Operation I. Fundamentals of Instructing › Task E. Elements of Effective Teaching in a Professional Environment
Task E. Elements of Effective Teaching in a Professional Environment
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands effects of instructor behavior on effective teaching, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.E.K1 Aviation instructor responsibilities, including:
FI.I.E.K1a a. Helping learners
FI.I.E.K1b b. Providing adequate instruction
FI.I.E.K1c c. Training to established standards of performance
FI.I.E.K1d d. Emphasizing the positive
FI.I.E.K1e e. Minimizing learner frustrations
FI.I.E.K2 Flight instructor responsibilities, including supervision and surveillance during training.
FI.I.E.K3 Flight instructor qualifications and professionalism.
FI.I.E.K4 Professional development.
FI.I.E.K5 Instructor ethics and conduct.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.E.R1 Fulfilling instructor responsibilities.
FI.I.E.R2 Exhibiting professionalism.
Area of Operation I. Fundamentals of Instructing
Skills: The applicant exhibits the skill to:
FI.I.E.S1 Deliver ground or flight instruction on an evaluator-assigned Task in a manner consistent with instructor responsibilities and professional characteristics as stated in K1 through K5.
Area of Operation I. Fundamentals of Instructing › Task F.
Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands teaching practical risk management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.F.K1 Teaching risk identification, assessment, and mitigation.
FI.I.F.K2 Teaching risk management tools, including:
FI.I.F.K2a a. Pilot/Aircraft/enVironment/External Pressures (PAVE) checklist
FI.I.F.K2b b. Flight Risk Assessment Tools (FRATs)
FI.I.F.K3 When and how to introduce risk management.
FI.I.F.K4 Risk management teaching techniques by phase of instruction.
FI.I.F.K5 Managing risk during flight instruction, including:
FI.I.F.K5a a. Common flight instruction risks
FI.I.F.K5b b. Best practices
FI.I.F.K5c c. Special considerations while teaching takeoffs and landings
FI.I.F.K6 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.F.R1 Hazards associated with providing flight instruction.
FI.I.F.R2 Obstacles to maintaining situational awareness during flight instruction.
FI.I.F.R3 Recognizing and managing hazards arising from human behavior, including hazardous attitudes.
Skills: The applicant exhibits the skill to:
FI.I.F.S1 Use scenario-based training (SBT) to demonstrate, teach, and assess risk management and Aeronautical Decision-Making (ADM) skills in the context of a Task specified by the evaluator.
FI.I.F.S2 Identify, assess, and mitigate risks commonly associated with flight instruction by maintaining:
FI.I.F.S2a a. Awareness and oversight of the learner’s actions, with timely and appropriate supervision,
intervention, or mitigation as needed
FI.I.F.S2b b. Awareness of the learner’s cognitive/physiological state, with timely action to mitigate anxiety,
fatigue, or other obstruction to learning
FI.I.F.S2c c. Overall situational awareness of the aircraft’s dynamic state, its position in space, and
vigilance for unexpected events or changing circumstances that occur in the environment
Area of Operation I. Fundamentals of Instructing
FI.I.F.S3 Model and teach safety practices, including maintaining:
FI.I.F.S3a a. Collision avoidance while simultaneously providing instruction
FI.I.F.S3b b. Avoidance of unnecessary distractions
FI.I.F.S3c c. Coordinated flight
FI.I.F.S3d d. Awareness of who is manipulating controls through positive exchange of flight controls
FI.I.F.S3e e. Continuous awareness of the aircraft’s dynamic state and position in the NAS
Area of Operation II. Technical Subject Areas › Task A. Human Factors
Area of Operation II. Technical Subject Areas
Area of Operation II. Technical Subject Areas
Note: The evaluator must select Tasks C, K, and at least one other Task from this Area of Operation.
Task A. Human Factors
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands personal health, flight physiology, aeromedical and human factors, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.A.K1 Symptoms, recognition, causes, effects, and corrective actions associated with aeromedical and physiological issues, including:
IL.II.A.K1a a. Hypoxia
IL.II.A.K1b b. Hyperventilation
IL.II.A.K1c c. Middle ear and sinus problems
IL.II.A.K1d d. Spatial disorientation
IL.II.A.K1e e. Motion sickness
IL.II.A.K1f f. Carbon monoxide poisoning
IL.II.A.K1g g. Stress
IL.II.A.K1h h. Fatigue
IL.II.A.K1i i. Dehydration and nutrition
IL.II.A.K1j j. Hypothermia
IL.II.A.K1k k. Optical illusions
IL.II.A.K1l l. Dissolved nitrogen in the bloodstream after scuba dives
IL.II.A.K2 Regulations regarding use of alcohol and drugs.
IL.II.A.K3 Effects of alcohol, drugs, and over-the-counter medications.
IL.II.A.K4 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.A.R1 Aeromedical and physiological issues.
IL.II.A.R2 Hazardous attitudes.
IL.II.A.R3 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.II.A.R4 Confirmation and expectation bias.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.A.S1 Associate the symptoms and effects for at least three of the conditions listed in K1a through K1l with the cause(s) and corrective action(s).
Area of Operation II. Technical Subject Areas
IL.II.A.S2 Perform self-assessment, including fitness for flight and personal minimums, for actual flight or a scenario given by the evaluator.
Area of Operation II. Technical Subject Areas › Task B. Visual Scanning and Collision Avoidance
Task B. Visual Scanning and Collision Avoidance
References: AC 90-48; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands visual scanning and collision avoidance, can apply that knowledge, manage associated risks, demonstrate pilot-in-command skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.B.K1 Environmental conditions that degrade vision.
IL.II.B.K2 Vestibular and visual illusions.
IL.II.B.K3 “See and Avoid” responsibilities.
IL.II.B.K4 Visual scanning procedure and the importance of peripheral vision.
IL.II.B.K5 Aircraft blind spots and clearing procedures.
IL.II.B.K6 Visual cues of an impending mid-air collision.
IL.II.B.K7 Situations that create the greatest collision risk.
IL.II.B.K8 Division of attention inside and outside the aircraft.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.B.R1 Distractions to visual scanning.
IL.II.B.R2 Relaxed intermediate focal distance.
IL.II.B.R3 High volume operational environments.
IL.II.B.R4 Collision reaction time.
IL.II.B.R5 Use of a safety pilot.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.B.S1 Effectively scan using short regularly spaced eye movements.
IL.II.B.S2 Scan around physical obstructions.
IL.II.B.S3 Use appropriate visual scanning techniques.
IL.II.B.S4 Use electronic traffic alert systems, if available.
Area of Operation II. Technical Subject Areas › Task C. Runway Incursion Avoidance
Task C. Runway Incursion Avoidance
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands runway incursion avoidance, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
Area of Operation II. Technical Subject Areas
IL.II.C.K1 Runway incursion definition.
IL.II.C.K2 Taxi instructions/clearances.
IL.II.C.K3 The importance of recording taxi instructions and reviewing taxi routes on the airport diagram.
IL.II.C.K4 Airport markings, signs, and lights including the importance of hold lines associated with runways.
IL.II.C.K5 Appropriate flight deck activities during taxiing, including taxi route planning, briefing the location of Hot Spots, communicating and coordinating with ATC.
IL.II.C.K6 Communication and operational procedures at uncontrolled airports.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.II.C.R2 Confirmation or expectation bias as related to taxi instructions.
IL.II.C.R3 Entering or crossing runways.
IL.II.C.R4 Night taxi operations.
IL.II.C.R5 Low visibility taxi operations.
IL.II.C.R6 Runway incursion after landing.
IL.II.C.R7 Operating on taxiways between parallel runways.
Skills: The applicant demonstrates how to:
IL.II.C.S1 Deliver instruction on the elements and techniques for runway incursion avoidance.
Area of Operation II. Technical Subject Areas › Task D. Principles of Flight
Task D. Principles of Flight
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands aerodynamics appropriate to the desired instructor certificate, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.D.K1 Airfoils, including terminology, definitions, and types.
IL.II.D.K2 Lift, weight, thrust, and drag.
IL.II.D.K3 Aircraft stability, maneuverability, and controllability.
IL.II.D.K4 Turning tendency (e.g., torque, p-factor, spiraling slipstream, and gyroscopic precession).
IL.II.D.K5 Forces acting on an aircraft.
IL.II.D.K6 Load factors in aircraft design.
IL.II.D.K7 Wingtip vortices and appropriate precautions.
IL.II.D.K8 Dissymmetry of lift.
Area of Operation II. Technical Subject Areas
IL.II.D.K9 Translational lift, including effective translational lift (ETL).
IL.II.D.K10 Pitch-up with side-slip.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.D.R1 The basic aerodynamic principles of flight.
Skills: The applicant demonstrates how to:
IL.II.D.S1 Deliver instruction on principles of flight, including at least three of the elements listed in K1 through K10.
Area of Operation II. Technical Subject Areas › Task E. Flight Controls and Systems
Task E. Flight Controls and Systems
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands the flight controls and systems on the aircraft provided for the flight test, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If K1 is selected, the evaluator assesses the applicant’s knowledge of at least three sub-elements.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.E.K1 Aircraft systems, including:
IL.II.E.K1a a. Primary flight controls
IL.II.E.K1b b. Secondary flight controls
IL.II.E.K1c c. Powerplant(s) and means of producing thrust
IL.II.E.K1d d. Landing gear
IL.II.E.K1e e. Fuel, oil, and hydraulic
IL.II.E.K1f f. Electrical
IL.II.E.K1g g. Avionics
IL.II.E.K1h h. Pitot-static, vacuum/pressure, and associated flight instruments
IL.II.E.K1i i. Environmental
IL.II.E.K1j j. Deicing and anti-icing
IL.II.E.K1k k. Oxygen system
IL.II.E.K1l l. Gearboxes, drive shafts, transmission systems, as applicable
IL.II.E.K1m m. Battery(s) used for propulsion–charging, discharging, and condition, as applicable
IL.II.E.K2 Indications of and procedures for managing system abnormalities or failures.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.E.R1 Detection of system malfunctions or failures.
Area of Operation II. Technical Subject Areas
IL.II.E.R2 Management of a system failure.
IL.II.E.R3 Monitoring and management of automated systems.
IL.II.E.R4 Providing instruction in unfamiliar aircraft or operating with unfamiliar flight display systems and avionics.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.E.S1 Operate at least three of the systems listed in K1a through K1m appropriately.
Area of Operation II. Technical Subject Areas › Task F. Performance and Limitations
Task F. Performance and Limitations
References: FAA-H-8083-1, FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands aircraft performance and limitations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.F.K1 Elements related to performance and limitations by explaining the use of charts, tables, and data to determine performance.
IL.II.F.K2 Factors affecting performance, including:
IL.II.F.K2a a. Atmospheric conditions
IL.II.F.K2b b. Pilot technique
IL.II.F.K2c c. Aircraft configuration
IL.II.F.K2d d. Airport, heliport, helipad, or unprepared surface environment
IL.II.F.K2e e. Loading and weight and balance
IL.II.F.K3 Weight and balance terms, including: basic empty weight, maximum gross weight, arm, moment, reference datum, center of gravity (CG) and CG limits, and useful load.
IL.II.F.K4 Methods for computing CG.
IL.II.F.K5 Height/Velocity (H/V) diagram according to the flight manual.
IL.II.F.K6 Aerodynamics.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.F.R1 Use of performance charts, tables, and data.
IL.II.F.R2 Aircraft limitations.
IL.II.F.R3 Possible differences between calculated performance and actual performance.
IL.II.F.R4 Operations within “avoid areas” of the H/V diagram.
IL.II.F.R5 Other hazards specific to the powered-lift make and model.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.F.S1 Use of the appropriate manufacturer’s approved performance charts, tables, and data.
Area of Operation II. Technical Subject Areas
IL.II.F.S2 Compute the weight and balance, correct out-of-center of gravity loading errors and determine if the weight and balance remains within limits during all phases of flight and aircraft configurations.
Area of Operation II. Technical Subject Areas › Task G. National Airspace System
Task G. National Airspace System
References: 14 CFR parts 71, 91, 93; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; VFR Navigation Charts
Objective: To determine the applicant understands the National Airspace System, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.G.K1 Airspace classes and associated requirements and limitations.
IL.II.G.K2 Chart symbols.
IL.II.G.K3 Special use airspace (SUA), special flight rules areas (SFRA), temporary flight restrictions (TFR), and other airspace areas.
IL.II.G.K4 Currency of publications.
IL.II.G.K5 Special visual flight rules (VFR) requirements.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.G.R1 Various classes and types of airspace.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.G.S1 Identify and comply with the requirements for basic VFR weather minimums and flying in particular classes of airspace.
IL.II.G.S2 Correctly identify airspace and operate in accordance with associated communication and equipment requirements.
IL.II.G.S3 Identify the requirements for operating in SUA or within a TFR. Identify and comply with special air traffic rules (SATR) and SFRA operations, if applicable.
Area of Operation II. Technical Subject Areas › Task H. Navigation Systems and Radar Services
Task H. Navigation Systems and Radar Services
References: AC 91-78; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands navigation systems and radar services, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: The evaluator should reference the manufacturer’s equipment supplement(s) as necessary for appropriate limitations, procedures, etc.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.H.K1 Ground-based navigation (identification, orientation, course determination, equipment, tests, regulations, interference, appropriate use of navigation data, and signal integrity).
IL.II.H.K2 Satellite-based navigation (e.g., equipment, regulations, authorized use of databases, and Receiver Autonomous Integrity Monitoring (RAIM)).
Area of Operation II. Technical Subject Areas
IL.II.H.K3 Radar assistance to visual flight rules (VFR) aircraft (e.g., operations, equipment, available services, traffic advisories).
IL.II.H.K4 Transponder (Mode(s) A, C, and S) and Automatic Dependent Surveillance-Broadcast (ADS-B).
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.H.R1 Management of automated navigation and autoflight systems.
IL.II.H.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.II.H.R3 Limitations of the navigation system in use.
IL.II.H.R4 Loss of a navigation signal.
IL.II.H.R5 Use of an electronic flight bag (EFB), if used.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.H.S1 Use an airborne electronic navigation system.
IL.II.H.S2 Determine the aircraft's position using the navigation system.
IL.II.H.S3 Intercept and track a given course, radial, or bearing.
IL.II.H.S4 Recognize and describe the indication of station or waypoint passage.
IL.II.H.S5 Use proper communication procedures when utilizing radar services.
Area of Operation II. Technical Subject Areas › Task I. Navigation and Cross-Country Flight Planning
Task I. Navigation and Cross-Country Flight Planning
References: 14 CFR part 91; AC 91.21-1; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; NOTAMs; Flight Manual; VFR Navigation Charts
Objective: To determine the applicant understands navigation and cross-country flight planning, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: Preparation, presentation, and explanation of a computer-generated flight plan is an acceptable option.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.I.K1 Route planning, including consideration of different classes and special use airspace (SUA) and selection of appropriate and available navigation/communication systems and facilities.
IL.II.I.K2 Altitude selection accounting for terrain and obstacles, glide distance of aircraft, visual flight rules (VFR) cruising altitudes, and effect of wind.
IL.II.I.K3 Plotting a course.
IL.II.I.K4 Power setting selection.
IL.II.I.K5 Calculating:
IL.II.I.K5a a. Time, climb and descent rates, course, distance, heading, true airspeed, and groundspeed
IL.II.I.K5b b. Estimated time of arrival, including conversion to universal coordinated time (UTC)
IL.II.I.K5c c. Fuel requirements, including reserve
IL.II.I.K6 Elements of a VFR flight plan.
Area of Operation II. Technical Subject Areas
IL.II.I.K7 Correlate weather information to make a go/no-go decision.
IL.II.I.K8 Procedures for activating and closing a VFR flight plan.
IL.II.I.K9 Magnetic compass errors.
IL.II.I.K10 Pilotage and dead reckoning.
IL.II.I.K11 Planned calculations versus actual results and required corrections.
IL.II.I.K12 Diversion and lost procedures.
IL.II.I.K13 Inflight intercept procedures.
IL.II.I.K14 Use of an electronic flight bag (EFB), if used.
IL.II.I.K15 Chart symbols.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.I.R1 Pilot.
IL.II.I.R2 Aircraft.
IL.II.I.R3 Environment (e.g., weather, airports, airspace, terrain, obstacles).
IL.II.I.R4 External pressures.
IL.II.I.R5 Limitations of air traffic control (ATC) services.
IL.II.I.R6 Fuel planning.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.I.S1 Prepare, present, and explain a cross-country flight plan assigned by the evaluator, including a risk analysis to the first fuel stop.
IL.II.I.S2 Apply pertinent information from appropriate and current aeronautical charts, Chart Supplements; Notices to Air Missions (NOTAMs) relative to airport, runway and taxiway closures; and other flight publications.
IL.II.I.S3 Create a navigation plan and simulate filing a VFR flight plan.
IL.II.I.S4 Recalculate fuel reserves based on a scenario provided by the evaluator.
Area of Operation II. Technical Subject Areas › Task J. 14 CFR and Publications
Task J. 14 CFR and Publications
References: 14 CFR parts 1, 61, 91; 49 CFR part 830; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands the Code of Federal Regulations and other relevant publications, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.J.K1 14 CFR parts 1, 61, and 91.
IL.II.J.K2 49 CFR part 830.
Area of Operation II. Technical Subject Areas
IL.II.J.K3 Advisory Circulars, INFOs, and SAFOs.
IL.II.J.K4 Airman Certification Standards or Practical Test Standards.
IL.II.J.K5 Flight manuals.
IL.II.J.K6 Aeronautical Information Manual (AIM).
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.J.R1 Use of expired charts, manuals, or publications without current updates.
Skills: The applicant demonstrates how to:
IL.II.J.S1 Teach at least one of the elements listed in K1 through K6.
Area of Operation II. Technical Subject Areas › Task K. Endorsements and Logbook Entries
Task K. Endorsements and Logbook Entries
References: 14 CFR part 61; AC 61-65; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands logbook entries and endorsements, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.K.K1 Required logbook entries for instruction given.
IL.II.K.K2 Required student pilot pre-solo knowledge test, solo endorsements, and logbook entries.
IL.II.K.K3 Other required pilot logbook endorsements (e.g., Class B Airspace, Special Federal Aviation Regulation (SFAR)).
IL.II.K.K4 Preparation of a recommendation for a pilot practical test, including appropriate logbook entry and relevant certificate/rating application for:
IL.II.K.K4a a. Initial pilot certification
IL.II.K.K4b b. Additional pilot certification
IL.II.K.K4c c. Additional aircraft qualification
IL.II.K.K5 Endorsement of a pilot logbook for the satisfactory completion of an FAA flight review.
IL.II.K.K6 Required flight instructor records.
IL.II.K.K7 Flight instructor renewal and reinstatement requirements.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
IL.II.K.R1 Endorsements without appropriate limitations or expiration dates.
Skills: The applicant demonstrates how to:
IL.II.K.S1 Describe and prepare logbook entries/endorsements required for at least two of the events specified in the elements or sub-elements of K1 through K5.
Area of Operation II. Technical Subject Areas
Area of Operation II. Technical Subject Areas › Task L. Night Operations
Task L. Night Operations
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-15, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands night operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.L.K1 Physiological aspects of vision related to night flying.
IL.II.L.K2 Lighting systems identifying airports/heliports/helipads/landing areas, runways, taxiways and obstructions, as well as pilot controlled lighting.
IL.II.L.K3 Required aircraft equipment and lighting for night operations.
IL.II.L.K4 Personal equipment essential for night flight.
IL.II.L.K5 Night orientation, navigation, chart reading techniques and methods for maintaining night vision effectiveness.
IL.II.L.K6 Use of instruments to verify the aircraft attitude at night.
IL.II.L.K7 Interpretation of traffic position and direction based solely on position lights.
IL.II.L.K8 Visual illusions at night.
IL.II.L.K9 Night taxi operations.
IL.II.L.K10 Appropriate use of automation, if applicable.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.L.R1 Inoperative equipment.
IL.II.L.R2 Weather considerations specific to night operations.
IL.II.L.R3 Collision hazards.
IL.II.L.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.II.L.R5 Effect of visual illusions and night adaptation during all phases of night flying.
IL.II.L.R6 Runway incursion.
IL.II.L.R7 Night currency versus proficiency.
Skills: The applicant demonstrates how to:
IL.II.L.S1 Teach at least one of the elements listed in K1 through K10.
Area of Operation II. Technical Subject Areas › Task M. High Altitude Operations - Supplemental Oxygen
Task M. High Altitude Operations - Supplemental Oxygen
References: 14 CFR part 91; AC 61-107; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with flight at higher altitudes where supplemental oxygen is required or recommended, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
Area of Operation II. Technical Subject Areas
IL.II.M.K 1 Regulatory requirements for supplemental oxygen use by flight crew and passengers.
IL.II.M.K2 Physiological factors, including:
IL.II.M.K2a a. Impairment
IL.II.M.K2b b. Symptoms of hypoxia
IL.II.M.K2c c. Time of useful consciousness (TUC)
IL.II.M.K3 Operational factors, including:
IL.II.M.K3a a. Characteristics, limitations, and applicability of continuous flow, demand, and pressure-
demand oxygen systems
IL.II.M.K3b b. Differences between and identification of “aviator’s breathing oxygen” and other types of
oxygen
IL.II.M.K3c c. Precautions when using supplemental oxygen systems
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.M.R1 High altitude flight.
IL.II.M.R2 Use of supplemental oxygen.
IL.II.M.R3 Management of compressed gas containers.
IL.II.M.R4 Combustion hazards in an oxygen-rich environment.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.M.S1 Provide an adequate briefing on use of supplemental oxygen equipment.
IL.II.M.S2 Operate or simulate operation of the installed or portable oxygen equipment in the aircraft, if installed or available.
IL.II.M.S3 Determine the quantity of supplemental oxygen required in a scenario given by the evaluator.
Area of Operation II. Technical Subject Areas › Task N. High Altitude Operations - Pressurization
Task N. High Altitude Operations - Pressurization
References: AC 61-107; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands flight in pressurized aircraft at high altitudes, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.II.N.K1 Fundamental concepts of aircraft pressurization system, including failure modes.
IL.II.N.K2 Physiological factors, including:
IL.II.N.K2a a. Impairment
IL.II.N.K2b b. Symptoms of hypoxia
IL.II.N.K2c c. Time of useful consciousness (TUC)
IL.II.N.K2d d. Effects of rapid decompression on crew and passengers
Risk
Area of Operation II. Technical Subject Areas
Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.II.N.R1 High altitude flight.
IL.II.N.R2 Malfunction of pressurization system, if equipment is installed.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.II.N.S1 Operate the pressurization system, if equipment is installed.
IL.II.N.S2 Respond appropriately to simulated pressurization malfunctions, if equipment is installed.
Area of Operation III. Preflight Preparation › Task A. Pilot Qualifications
Area of Operation III. Preflight Preparation
Area of Operation III. Preflight Preparation
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Pilot Qualifications
References: 14 CFR parts 61, 68, 91; AC 60-28, AC 68-1; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands pilot training and qualification requirements for different levels of pilot certificate including student pilot, private pilot, commercial pilot, and flight instructor; can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.III.A.K1 Certification, currency, and recordkeeping requirements, including training and logbook entries.
IL.III.A.K2 Privileges and limitations of pilot certificates and ratings at student pilot, private, commercial, and flight instructor levels.
IL.III.A.K3 Medical certificates: class, expiration, privileges, temporary disqualifications, and operations under BasicMed.
IL.III.A.K4 Documents pilots must possess to exercise privileges of the specified certificate(s) and rating(s).
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.III.A.R1 Flying unfamiliar aircraft or operating with unfamiliar flight display systems and avionics.
IL.III.A.R2 Proficiency versus currency.
Skills: The applicant demonstrates how to:
IL.III.A.S1 Deliver instruction on at least two of the elements specified in K1 through K4.
Area of Operation III. Preflight Preparation › Task B. Airworthiness Requirements
Task B. Airworthiness Requirements
References: 14 CFR parts 21, 39, 43, 91; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands airworthiness requirements, including aircraft certificates, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.III.B.K1 General airworthiness requirements and compliance for aircraft, including:
IL.III.B.K1a a. Location and expiration dates of required aircraft certificates
IL.III.B.K1b b. Required inspections and aircraft logbook documentation
IL.III.B.K1c c. Airworthiness Directives and Special Airworthiness Information Bulletins
IL.III.B.K1d d. Purpose and procedure for obtaining a special flight permit
IL.III.B.K2 Pilot-performed preventive maintenance.
IL.III.B.K3 Equipment requirements for day and night VFR flight, including:
IL.III.B.K3a a. Flying with inoperative equipment
Area of Operation III. Preflight Preparation
IL.III.B.K3b b. Using an approved Minimum Equipment List (MEL)
IL.III.B.K3c c. Kinds of Operation Equipment List (KOEL)
IL.III.B.K3d d. Required discrepancy records or placards
IL.III.B.K4 Standard and special airworthiness certificates and their associated operational limitations.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.III.B.R1 Inoperative equipment discovered prior to flight.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.III.B.S1 Locate and describe aircraft airworthiness and registration information.
IL.III.B.S2 Determine the aircraft is airworthy in the scenario given by the evaluator.
IL.III.B.S3 Apply appropriate procedures for operating with inoperative equipment in a scenario given by the evaluator.
Area of Operation III. Preflight Preparation › Task C. Weather Information
Task C. Weather Information
References: 14 CFR part 91; AC 91-92; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25, FAA-H-8083-28
Objective: To determine the applicant understands weather information, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If K2 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Note: If K3 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.III.C.K1 Acceptable weather products and resources required for preflight planning, current and forecast weather for departure, en route, and arrival phases of flight such as:
IL.III.C.K1a a. Airport Observations (METAR and SPECI) and Pilot Observations (PIREP)
IL.III.C.K1b b. Surface Analysis Chart, Ceiling and Visibility Chart (CVA)
IL.III.C.K1c c. Terminal Aerodrome Forecasts (TAF)
IL.III.C.K1d d. Graphical Forecasts for Aviation (GFA)
IL.III.C.K1e e. Wind and Temperature Aloft Forecast (FB)
IL.III.C.K1f f. Convective Outlook (AC)
IL.III.C.K1g g. Inflight Aviation Weather Advisories including Airmen's Meteorological Information (AIRMET),
Significant Meteorological Information (SIGMET), and Convective SIGMET
IL.III.C.K2 Meteorology applicable to the departure, en route, alternate, and destination under visual flight rules (VFR) in Visual Meteorological Conditions (VMC), including expected climate and hazardous conditions such as:
IL.III.C.K2a a. Atmospheric composition and stability
IL.III.C.K2b b. Wind (e.g., windshear, mountain wave, factors affecting wind, etc.)
IL.III.C.K2c c. Temperature and heat exchange
Area of Operation III. Preflight Preparation
IL.III.C.K2d d. Moisture/precipitation
IL.III.C.K2e e. Weather system formation, including air masses and fronts
IL.III.C.K2f f. Clouds
IL.III.C.K2g g. Turbulence
IL.III.C.K2h h. Thunderstorms and microbursts
IL.III.C.K2i i. Icing and freezing level information
IL.III.C.K2j j. Fog/mist
IL.III.C.K2k k. Frost
IL.III.C.K2l l. Obstructions to visibility (e.g., smoke, haze, volcanic ash, etc.)
IL.III.C.K3 Flight deck instrument displays of digital weather and aeronautical information.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.III.C.R1 Making the go/no-go and continue/divert decisions, including:
IL.III.C.R1a a. Circumstances that would make diversion prudent
IL.III.C.R1b b. Personal weather minimums
IL.III.C.R1c c. Hazardous weather conditions, including known or forecast icing or turbulence aloft
IL.III.C.R2 Use and limitations of:
IL.III.C.R2a a. Installed onboard weather equipment
IL.III.C.R2b b. Aviation weather reports and forecasts
IL.III.C.R2c c. Inflight weather resources
Skills: The applicant demonstrates and simultaneously explains how to:
IL.III.C.S1 Use available aviation weather resources to obtain an adequate weather briefing.
IL.III.C.S2 Analyze the implications of at least three of the conditions listed in K3a through K3l, using actual weather or weather conditions provided by the evaluator.
IL.III.C.S3 Correlate weather information to make a go/no-go decision.
Area of Operation IV.
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Note: The evaluator asks the applicant to present a preflight lesson on the selected maneuver as the lesson would be taught to a student and determines the outcome of this Task before the flight portion of the practical test. Previously developed lesson plans from the instructor applicant's library may be used.
Area of Operation IV. › Task A. Maneuver Lesson
Task A. Maneuver Lesson
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands the elements associated with a maneuver Task selected from Area of Operation VII (Hovering Maneuvers) through Area of Operation XV (Special Operations) and applies that knowledge when delivering ground instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.IV.A.K1 Purpose of the maneuver.
IL.IV.A.K2 Elements of the maneuver and the associated common errors.
IL.IV.A.K3 Desired outcome(s), including completion standards.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.IV.A.R1 The selected maneuver Task.
Skills: The applicant exhibits the skill to:
IL.IV.A.S1 Deliver instruction on the selected maneuver using a lesson plan, teaching methods, and teaching aids, as appropriate, that incorporate K1 through K3.
Area of Operation V. Preflight Procedures › Task A. Preflight Assessment
Area of Operation V. Preflight Procedures
Area of Operation V. Preflight Procedures
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Preflight Assessment
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25, FAA-H-8083-28; Flight Manual
Objective: To determine the applicant understands preflight assessment, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.V.A.K1 Pilot self-assessment.
IL.V.A.K2 Determining that the aircraft to be used is airworthy.
IL.V.A.K3 Aircraft preflight inspection, including:
IL.V.A.K3a a. Which items should be inspected
IL.V.A.K3b b. The reasons for checking each item
IL.V.A.K3c c. How to detect possible defects
IL.V.A.K3d d. The associated regulations
IL.V.A.K4 Environmental factors, including weather, terrain, route selection, and obstructions.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.V.A.R1 Pilot.
IL.V.A.R2 Aircraft.
IL.V.A.R3 Environment (e.g., weather, icing, airports/heliports/helipads/landing areas, airspace, terrain, obstacles).
IL.V.A.R4 External pressures.
IL.V.A.R5 Aviation security concerns.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.V.A.S1 Inspect the aircraft with reference to an appropriate checklist.
IL.V.A.S2 Verify the aircraft is in condition for safe flight and conforms to its type design.
IL.V.A.S3 Perform self-assessment.
IL.V.A.S4 Continue to assess the environment for safe flight.
Area of Operation V. Preflight Procedures › Task B. Flight Deck Management
Task B. Flight Deck Management
References: 14 CFR part 91; AC 120-71; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands flight deck management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: See Appendix 2: Safety of Flight.
Area of Operation V. Preflight Procedures
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.V.B.K1 Passenger briefing requirements, including operation and required use of safety restraint systems.
IL.V.B.K2 Use of appropriate checklists.
IL.V.B.K3 Requirements for current and appropriate navigation data.
IL.V.B.K4 Securing items and cargo.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.V.B.R1 Use of systems or equipment, including automation and portable electronic devices.
IL.V.B.R2 Inoperative equipment.
IL.V.B.R3 Passenger distractions.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.V.B.S1 Secure all items in the aircraft.
IL.V.B.S2 Conduct an appropriate passenger briefing, including identifying the pilot-in-command (PIC), use of safety belts, shoulder harnesses, doors, sterile aircraft, passenger conduct and avoidance of rotor or air induction systems, powerplants, and other heat sources, and emergency procedures.
IL.V.B.S3 Properly program and manage the aircraft’s automation, as applicable.
IL.V.B.S4 Appropriately manage risks by utilizing ADM, including SRM/CRM.
Area of Operation V. Preflight Procedures › Task C. Powerplant Starting
Task C. Powerplant Starting
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands powerplant starting procedures, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.V.C.K1 Starting under various conditions.
IL.V.C.K2 Starting procedures, including the use of external power if applicable.
IL.V.C.K3 Limitations associated with starting.
IL.V.C.K4 Conditions leading to and procedures for an aborted start.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
IL.V.C.R1 Use of external power unit.
IL.V.C.R2 Limitations during starting.
IL.V.C.R3 Other hazards specific to the powered-lift make and model.
Skills: The applicant demonstrates and simultaneously explains how to:
Area of Operation V. Preflight Procedures
IL.V.C.S1 Position the aircraft properly considering structures, other aircraft, wind, and the safety of nearby persons and property.
IL.V.C.S2 Complete the appropriate checklist(s).
IL.V.C.S3 Position the primary flight controls, including the thrust vector, for the prevailing environmental conditions.
IL.V.C.S4 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
Area of Operation V. Preflight Procedures › Task D. Ground Taxiing
Task D. Ground Taxiing
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands ground taxi operations in a wheel-type aircraft, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.V.D.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
IL.V.D.K2 Taxi instructions/clearances.
IL.V.D.K3 Airport, heliport, helipad, or unprepared surface environment.
IL.V.D.K4 Visual indicators for wind.
IL.V.D.K5 Aircraft lighting, as appropriate.
IL.V.D.K6 Procedures for:
IL.V.D.K6a a. Appropriate flight deck activities prior to taxi, including route planning and identifying the
location of Hot Spots
IL.V.D.K6b b. Aircraft configuration
IL.V.D.K6c c. Radio communications at towered and non-towered airports/heliports/helipads/landing areas
IL.V.D.K6d d. Entering or crossing runways
IL.V.D.K6e e. Night taxi operations
IL.V.D.K6f f. Taxi limitations
IL.V.D.K7 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.V.D.R1 Activities and distractions.
IL.V.D.R2 Confirmation or expectation bias as related to taxi instructions.
IL.V.D.R3 A taxi route or departure runway change.
IL.V.D.R4 Speed during taxi and turns.
IL.V.D.R5 Appropriate thrust vector and brake use.
IL.V.D.R6 Airframe and rotor clearances during taxi.
Area of Operation V. Preflight Procedures
IL.V.D.R7 Runway incursion.
IL.V.D.R8 Other hazards specific to the powered-lift make and model.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.V.D.S1 Receive and correctly read back clearances/instructions, if applicable.
IL.V.D.S2 Use an appropriate airport/heliport diagram or taxi chart, if published.
IL.V.D.S3 Position the flight controls and configure the aircraft for the existing wind conditions.
IL.V.D.S4 Complete the appropriate checklist(s).
IL.V.D.S5 Comply with airport/heliport/helipad/landing area taxiway markings, signals, and air traffic control (ATC) clearances and instructions.
IL.V.D.S6 Position the aircraft relative to hold lines or a specified point.
IL.V.D.S7 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.V.D.S8 Maintain positive control of the aircraft during ground operations by controlling direction and speed without excessive use of brakes.
IL.V.D.S9 Analyze and correct common errors related to this Task.
Area of Operation V. Preflight Procedures › Task E. Before Takeoff Check
Task E. Before Takeoff Check
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands before takeoff checks, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.V.E.K1 Purpose of before takeoff checklist items, including:
IL.V.E.K1a a. Reasons for checking each item
IL.V.E.K1b b. Detecting malfunctions
IL.V.E.K1c c. Configuring the aircraft as recommended by the manufacturer
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
IL.V.E.R1 Division of attention while conducting before takeoff checks.
IL.V.E.R2 Unexpected runway changes.
IL.V.E.R3 Unexpected or unclear clearances from ATC.
IL.V.E.R4 Wake turbulence.
IL.V.E.R5 Downwash.
IL.V.E.R6 Potential powerplant failure during takeoff or other malfunction considering operational factors such as aircraft characteristics, runway/takeoff path length, surface conditions, environmental conditions, and obstructions.
Skills: The applicant demonstrates and simultaneously explains how to:
Area of Operation V. Preflight Procedures
IL.V.E.S1 Review takeoff performance.
IL.V.E.S2 Select the appropriate takeoff profile for aircraft and environmental conditions.
IL.V.E.S3 Complete the appropriate checklist(s).
IL.V.E.S4 Properly position the aircraft considering other aircraft, vessels, and wind.
IL.V.E.S5 Divide attention inside and outside the aircraft.
IL.V.E.S6 Verify that powerplant parameters and aircraft configuration are suitable for the takeoff profile.
IL.V.E.S7 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
Area of Operation VI. Airport and Heliport Operations › Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting
Area of Operation VI. Airport and Heliport Operations
Area of Operation VI. Airport and Heliport Operations
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Runway/Taxiway/Heliport/Helipad Signs, Markings, and Lighting
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-25, FAA-H-8083-9
Objective: To determine the applicant understands airport/runway/ taxiway/heliport/helipad signs, markings, and lighting, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VI.A.K1 Airport runway, heliport, helipad, taxiway signs, markings, and lighting.
IL.VI.A.K2 Airport movement area.
IL.VI.A.K3 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VI.A.R1 Interpretation of signs, markings, or lighting.
IL.VI.A.R2 Landing site dimensions and limitations.
IL.VI.A.R3 Conflict with aircraft, vehicles, and persons.
IL.VI.A.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.VI.A.R5 Powered-lift configuration, including the effect of thrust on other aircraft.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VI.A.S1 Comply with airport/heliport/helipad signs, markings, and lighting encountered, as applicable to the aircraft provided for the practical test.
IL.VI.A.S2 Analyze and correct common errors related to this Task.
Area of Operation VI. Airport and Heliport Operations › Task B. Communications, Light Signals, and Runway Lighting Systems
Task B. Communications, Light Signals, and Runway Lighting Systems
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands communications and ATC light signals, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VI.B.K1 How to obtain appropriate radio frequencies.
IL.VI.B.K2 Proper radio communication procedures and air traffic control (ATC) phraseology.
IL.VI.B.K3 ATC light signal recognition.
IL.VI.B.K4 Appropriate use of transponder(s).
IL.VI.B.K5 Lost communication procedures.
IL.VI.B.K6 Equipment issues that could cause loss of communication.
Area of Operation VI. Airport and Heliport Operations
IL.VI.B.K7 Radar assistance.
IL.VI.B.K8 Runway Status Lighting Systems.
IL.VI.B.K9 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VI.B.R1 Communication.
IL.VI.B.R2 Deciding if and when to declare an emergency.
IL.VI.B.R3 Use of non-standard phraseology.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VI.B.S1 Select and activate appropriate frequencies.
IL.VI.B.S2 Transmit using standard phraseology and procedures as specified in the Aeronautical Information Manual (AIM) and Pilot/Controller Glossary.
IL.VI.B.S3 Acknowledge radio communications and comply with ATC instructions or as directed by the evaluator.
IL.VI.B.S4 Analyze and correct common errors related to this Task.
Area of Operation VI. Airport and Heliport Operations › Task C. Traffic Patterns
Task C. Traffic Patterns
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands traffic patterns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VI.C.K1 Towered and nontowered airport/heliport/helipad/landing area operations and restrictions.
IL.VI.C.K2 Runway selection and traffic pattern parameters for the current conditions.
IL.VI.C.K3 Right-of-way rules.
IL.VI.C.K4 Use of automated weather and airport/heliport information.
IL.VI.C.K5 Aircraft configuration and selection for the traffic pattern in use.
IL.VI.C.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VI.C.R1 Collision hazards.
IL.VI.C.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.VI.C.R3 Windshear and wake turbulence.
Skills: The applicant demonstrates and simultaneously explains how to:
Area of Operation VI. Airport and Heliport Operations
IL.VI.C.S1 Identify and interpret airport/heliport/helipad/landing area runways, taxiways, markings, signs, and lighting.
IL.VI.C.S2 Comply with recommended traffic pattern procedures.
IL.VI.C.S3 Correct for wind drift to maintain the proper ground track.
IL.VI.C.S4 Maintain orientation with the runway/landing area in use, as applicable.
IL.VI.C.S5 Maintain traffic pattern altitude, ±100 feet, and the appropriate airspeed, ±10 knots.
IL.VI.C.S6 Maintain situational awareness and proper spacing from other aircraft in the traffic pattern.
IL.VI.C.S7 Position the primary flight controls, including the thrust vector, for the prevailing environmental conditions.
IL.VI.C.S8 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VI.C.S9 Analyze and correct common errors related to this Task.
Area of Operation VII. Hovering Maneuvers › Task A. Vertical Takeoff and Landing
Area of Operation VII. Hovering Maneuvers
Area of Operation VII. Hovering Maneuvers
Task A. Vertical Takeoff and Landing
References: 14 CFR part 91; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands vertical takeoff and landing from a hover, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VII.A.K1 Elements related to a vertical takeoff to a hover and landing from a hover.
IL.VII.A.K2 Appropriate aircraft configuration for a stationary hover.
IL.VII.A.K3 Effect of wind on flight control inputs.
IL.VII.A.K4 Ground effect.
IL.VII.A.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VII.A.R1 Obstacle and hazard avoidance.
IL.VII.A.R2 Dynamic rollover.
IL.VII.A.R3 Powerplant failure during hover.
IL.VII.A.R4 Downwash.
IL.VII.A.R5 Ground resonance.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VII.A.S1 Complete the appropriate checklist(s).
IL.VII.A.S2 Comply with ATC or evaluator instructions and make radio calls as appropriate.
IL.VII.A.S3 Position the primary flight controls, including the thrust vector, for the prevailing environmental conditions.
IL.VII.A.S4 Ascend to and maintain recommended hovering altitude, and descend from recommended hovering altitude in headwind, crosswind, and tailwind conditions, without drift.
IL.VII.A.S5 Maintain recommended hovering altitude, ±1/2 of that altitude within 10 feet of the surface, if above 10 feet, ±5 feet.
IL.VII.A.S6 Maintain position within ±2 feet of a designated point.
IL.VII.A.S7 Descend vertically to within 2 feet of the designated touchdown point.
IL.VII.A.S8 Maintain headings ±10°, as specified by the evaluator.
IL.VII.A.S9 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VII.A.S10 Analyze and correct common errors related to this Task.
Area of Operation VII. Hovering Maneuvers
Area of Operation VII. Hovering Maneuvers › Task B. Hover Taxi
Task B. Hover Taxi
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands hover taxi operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VII.B.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
IL.VII.B.K2 Hover taxi instructions, clearances, and limitations.
IL.VII.B.K3 Airport, heliport, helipad, or unprepared surface environment.
IL.VII.B.K4 Visual indicators for wind.
IL.VII.B.K5 Aircraft lighting, as appropriate.
IL.VII.B.K6 Procedures for:
IL.VII.B.K6a a. Pilot activities during taxiing
IL.VII.B.K6b b. Safe hover taxi at towered and non-towered airports/heliports/helipads/landing areas
IL.VII.B.K6c c. Entering or crossing runways
IL.VII.B.K7 Aircraft configuration.
IL.VII.B.K8 Aircraft operating limitations.
IL.VII.B.K9 Common errors related to this Task.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
IL.VII.B.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.VII.B.R2 Reduced visibility or night taxi operations.
IL.VII.B.R3 Powerplant(s) failure during hover taxi.
IL.VII.B.R4 Other aircraft and hazards.
IL.VII.B.R5 Hazardous effects of downwash.
IL.VII.B.R6 Aircraft configuration.
IL.VII.B.R7 Height/Velocity (H/V) considerations.
IL.VII.B.R9 Crosswind limitations.
IL.VII.B.R10 Other hazards specific to the powered-lift make and model.
IL.VII.B.R11 Runway incursion.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VII.B.S1 Complete the appropriate checklist(s).
IL.VII.B.S2 Receive and correctly read back clearances/instructions, if applicable.
Area of Operation VII. Hovering Maneuvers
IL.VII.B.S3 Use an airport diagram or taxi chart during taxi, if published, and maintain situational awareness.
IL.VII.B.S4 Comply with airport/heliport taxiway markings, signals, and signs.
IL.VII.B.S5 Position the primary flight controls, including the thrust vector, for the prevailing environmental conditions.
IL.VII.B.S6 Hover taxi over specified ground references, demonstrating forward, sideward, and rearward hovering and hovering turns.
IL.VII.B.S7 Maintain recommended hovering altitude, ±1/2 of that altitude within 10 feet of the surface, if above 10 feet, ±5 feet.
IL.VII.B.S8 Make 90°, 180°, and 360° pivoting turns, stopping within 10° of specified headings.
IL.VII.B.S9 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VII.B.S10 Analyze and correct common errors related to this Task.
Area of Operation VII. Hovering Maneuvers › Task C. Air Taxi
Task C. Air Taxi
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands air taxi operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VII.C.K1 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
IL.VII.C.K2 Air taxi instructions, clearances, and limitations.
IL.VII.C.K3 Aircraft configuration.
IL.VII.C.K4 Airport, heliport, helipad, or unprepared surface environment.
IL.VII.C.K5 Visual indicators for wind.
IL.VII.C.K6 Aircraft lighting, as appropriate.
IL.VII.C.K7 Procedures for:
IL.VII.C.K7a a. Pilot activities during taxiing
IL.VII.C.K7b b. Safe air taxi at towered and non-towered airports/heliports/helipads/landing areas
IL.VII.C.K7c c. Overflying of runways
IL.VII.C.K8 Aircraft operating limitations.
IL.VII.C.K9 Height/Velocity (H/V) considerations.
IL.VII.C.K10 Appropriate height and speed for air taxi.
IL.VII.C.K11 Common errors related to this Task.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
IL.VII.C.R1 Activities and distractions.
Area of Operation VII. Hovering Maneuvers
IL.VII.C.R2 Reduced visibility or night taxi operations.
IL.VII.C.R3 H/V diagram performance in case of powerplant failure.
IL.VII.C.R4 Other aircraft and hazards.
IL.VII.C.R5 Runway incursion.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VII.C.S1 Complete the appropriate checklist(s).
IL.VII.C.S2 Use an airport diagram or taxi chart during taxi, if published, and maintain situational awareness.
IL.VII.C.S3 Select a safe airspeed and altitude.
IL.VII.C.S4 Maintain an appropriate aircraft configuration throughout the maneuver.
IL.VII.C.S5 Maintain specified altitude, ±10 feet.
IL.VII.C.S6 Air taxi from one point to another under various wind conditions.
IL.VII.C.S7 Maintain the aircraft within operating limits throughout the maneuver.
IL.VII.C.S8 Comply with airport/heliport/helipad/landing area markings, lights, signs, and ATC instructions.
IL.VII.C.S9 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VII.C.S10 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task A. Normal Takeoff and Climb from a Hover
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
Note: The evaluator must assess at least Tasks A, B, D, E, G, H, and one additional Task.
Task A. Normal Takeoff and Climb from a Hover
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands takeoff and climb from a hover, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.A.K1 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
IL.VIII.A.K2 Recommended takeoff and climb profiles.
IL.VIII.A.K3 Aircraft configuration.
IL.VIII.A.K4 Factors affecting the profile of the height/velocity (H/V) diagram.
IL.VIII.A.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.A.R1 Selection of helipad/deck, runway, or departure point based on aircraft performance and limitations, available distance, and wind.
IL.VIII.A.R2 Effects of:
IL.VIII.A.R2a a. Crosswind
IL.VIII.A.R2b b. Windshear
IL.VIII.A.R2c c. Tailwind
IL.VIII.A.R2d d. Wake turbulence
IL.VIII.A.R2e e. Runway/departure point surface/condition
IL.VIII.A.R2f f. Aircraft weight
IL.VIII.A.R3 Abnormal operations including:
IL.VIII.A.R3a a. Rejected takeoff
IL.VIII.A.R3b b. Powerplant failure in hover/takeoff/climb phase of flight
IL.VIII.A.R4 Collision hazards.
IL.VIII.A.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
IL.VIII.A.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.VIII.A.R7 Runway incursion.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.A.S1 Complete the appropriate checklist(s).
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.A.S2 Make radio calls as appropriate.
IL.VIII.A.S3 Verify assigned/correct runway, if at an airport.
IL.VIII.A.S4 Determine wind direction with or without visible wind direction indicators.
IL.VIII.A.S5 Position the flight controls and configure the aircraft for the existing wind conditions.
IL.VIII.A.S6 Clear the area, ground or hover taxi into takeoff position, and hover the aircraft above the departure point, aligned with the departure path.
IL.VIII.A.S7 Confirm takeoff power and instrument indications prior to forward movement.
IL.VIII.A.S8 Takeoff and accelerate to the manufacturer’s recommended speed.
IL.VIII.A.S9 After takeoff, establish and maintain a positive rate of climb and configure aircraft, as appropriate.
IL.VIII.A.S10 Maintain the aircraft within operating limits throughout the maneuver.
IL.VIII.A.S11 Maintain VY ±5 knots to a safe maneuvering altitude.
IL.VIII.A.S12 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
IL.VIII.A.S13 Comply with noise abatement procedures, as applicable.
IL.VIII.A.S14 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task B. Rolling Takeoff and Climb
Task B. Rolling Takeoff and Climb
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands rolling takeoff with wheel-type landing gear, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.B.K1 Elements related to a rolling takeoff and the purpose of the maneuver.
IL.VIII.B.K2 Aircraft configurations.
IL.VIII.B.K3 Effects of wind, weight, temperature, and density altitude.
IL.VIII.B.K4 Translational lift.
IL.VIII.B.K5 Takeoff and climb performance and the height velocity (H/V) diagram.
IL.VIII.B.K6 Aircraft performance and limitations.
IL.VIII.B.K7 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.B.R1 Collision hazards.
IL.VIII.B.R2 Powerplant failure during rolling takeoff and climb out.
IL.VIII.B.R3 Aircraft configuration.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.B.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.VIII.B.R5 Effects of:
IL.VIII.B.R5a a. Crosswind
IL.VIII.B.R5b b. Windshear
IL.VIII.B.R5c c. Tailwind
IL.VIII.B.R5d d. Wake turbulence
IL.VIII.B.R5e e. Runway/departure point surface/condition
IL.VIII.B.R5f f. Aircraft weight
IL.VIII.B.R6 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.B.S1 Comply with air traffic control (ATC) or evaluator instructions and make radio calls as appropriate.
IL.VIII.B.S2 Complete the appropriate checklist(s).
IL.VIII.B.S3 Configure the aircraft correctly regarding environmental conditions and aircraft loading.
IL.VIII.B.S4 Maintain the aircraft within operating limits throughout the maneuver.
IL.VIII.B.S5 Maintain proper ground track with crosswind correction, if necessary.
IL.VIII.B.S6 Maintain a positive rate of climb.
IL.VIII.B.S7 Transition to recommended climb airspeed ±5 knots.
IL.VIII.B.S8 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.B.S9 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task C. Maximum Performance Takeoff and Climb
Task C. Maximum Performance Takeoff and Climb
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands maximum performance takeoff and climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.C.K1 Situations where this maneuver is appropriate.
IL.VIII.C.K2 Effects of atmospheric conditions, including wind and temperature, on takeoff and climb performance.
IL.VIII.C.K3 Factors affecting the profile of the height/velocity (H/V) diagram.
IL.VIII.C.K4 Appropriate aircraft configuration, takeoff, and climb profiles.
IL.VIII.C.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.C.R1 Selection of takeoff path based on aircraft performance and limitations, available distance, and wind.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.C.R2 Effects of:
IL.VIII.C.R2a a. Crosswind
IL.VIII.C.R2b b. Windshear
IL.VIII.C.R2c c. Tailwind
IL.VIII.C.R2d d. Low level turbulence
IL.VIII.C.R2e e. Surface conditions
IL.VIII.C.R3 Abnormal operations including:
IL.VIII.C.R3a a. Rejected takeoff
IL.VIII.C.R3b b. Powerplant failure in takeoff/climb phase of flight
IL.VIII.C.R4 Collision hazards.
IL.VIII.C.R5 Low altitude maneuvering, including controlled flight into terrain (CFIT).
IL.VIII.C.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.C.S1 Complete the appropriate checklist(s).
IL.VIII.C.S2 Make radio calls as appropriate.
IL.VIII.C.S3 Determine wind direction with or without visible wind direction indicators.
IL.VIII.C.S4 Position the flight controls and configure the aircraft for the existing wind conditions.
IL.VIII.C.S5 Clear the area, taxi into takeoff position, utilizing maximum available takeoff area and align the aircraft on the takeoff path.
IL.VIII.C.S6 Confirm takeoff power and proper powerplant and flight instrument indications prior to takeoff.
IL.VIII.C.S7 Establish and maintain the most efficient lift-off attitude/configuration for obstacle clearance.
IL.VIII.C.S8 Maintain the recommended airspeed and aircraft configuration until the obstacle is cleared.
IL.VIII.C.S9 After clearing the obstacle, establish pitch attitude and aircraft configuration for VY and accelerate to and maintain VY ±5 knots during the climb.
IL.VIII.C.S10 Reconfigure the aircraft after a positive rate of climb has been verified or in accordance with the aircraft manufacturer's guidance.
IL.VIII.C.S11 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
IL.VIII.C.S12 Comply with noise abatement procedures.
IL.VIII.C.S13 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.C.S14 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task D. Normal Approach to a Hover
Task D. Normal Approach to a Hover
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands normal approach profile to a hover, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.D.K1 Types of approaches and applicability.
IL.VIII.D.K2 Performance data and the height velocity (H/V) diagram.
IL.VIII.D.K3 Effects of atmospheric conditions, including wind and density altitude, on approach and hover performance.
IL.VIII.D.K4 Wind correction techniques on approach and hover.
IL.VIII.D.K5 Aircraft configurations for the approach and hover.
IL.VIII.D.K6 Aircraft performance and limitations.
IL.VIII.D.K7 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.D.R1 Selection of runway/helipad/touchdown point based on aircraft performance and limitations, available distance, and wind.
IL.VIII.D.R2 Effects of:
IL.VIII.D.R2a a. Crosswind
IL.VIII.D.R2b b. Windshear
IL.VIII.D.R2c c. Tailwind
IL.VIII.D.R2d d. Wake turbulence
IL.VIII.D.R2e e. Vortex ring state (VRS)
IL.VIII.D.R2f f. Runway/arrival point surface/condition
IL.VIII.D.R3 Situations including:
IL.VIII.D.R3a a. Rejected landing and go-around
IL.VIII.D.R3b b. Powerplant failure during the approach
IL.VIII.D.R4 Collision hazards.
IL.VIII.D.R5 Flat light conditions.
IL.VIII.D.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.D.S1 Complete the appropriate checklist(s).
IL.VIII.D.S2 Comply with air traffic control (ATC) or evaluator instructions and make radio calls as appropriate.
IL.VIII.D.S3 Use the appropriate techniques and aircraft configurations through all stages of the approach.
IL.VIII.D.S4 Consider the wind conditions, landing surface, and obstructions and select a suitable hover point.
IL.VIII.D.S5 Maintain appropriate ground track with crosswind correction throughout the approach.
IL.VIII.D.S6 Fly a stabilized approach.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.D.S7 Arrive over the arrival point at a stabilized hover ±2 feet.
IL.VIII.D.S8 Execute a timely go-around for any condition that may result in an unsafe approach or landing.
IL.VIII.D.S9 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.D.S10 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task E. Normal Approach and Landing
Task E. Normal Approach and Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands normal approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.E.K1 Effects of atmospheric conditions, including wind, on approach speed and angle.
IL.VIII.E.K2 Atmospheric factors affecting performance.
IL.VIII.E.K3 Use of proper thrust vector angle for transition to landing.
IL.VIII.E.K4 Factors affecting the profile of the height/velocity (H/V) diagram.
IL.VIII.E.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.E.R1 Selection of runway or takeoff path based on aircraft performance and limitations, available distance, and wind.
IL.VIII.E.R2 Effects of:
IL.VIII.E.R2a a. Crosswind
IL.VIII.E.R2b b. Windshear
IL.VIII.E.R2c c. Tailwind
IL.VIII.E.R2d d. Wake turbulence
IL.VIII.E.R2e e. Runway/heliport/helipad surface, condition, and length
IL.VIII.E.R3 Situations including:
IL.VIII.E.R3a a. Rejected landing and go-around
IL.VIII.E.R3b b. Powerplant failure during the approach
IL.VIII.E.R4 Collision hazards.
IL.VIII.E.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.E.S1 Complete the appropriate checklist(s).
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.E.S2 Comply with noise abatement procedures.
IL.VIII.E.S3 Make radio calls as appropriate.
IL.VIII.E.S4 Verify assigned/correct runway/landing point if at an airport.
IL.VIII.E.S5 Determine wind direction with or without visible wind direction indicators.
IL.VIII.E.S6 Maintain proper ground track with crosswind correction, if necessary.
IL.VIII.E.S7 Maintain a stabilized approach profile.
IL.VIII.E.S8 Use manufacturer's recommended technique and remain within airspeed range allowed for each configuration change.
IL.VIII.E.S9 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.E.S10 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task F. Steep Approach and Landing
Task F. Steep Approach and Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands steep approaches, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: See Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations for information related to this Task.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.F.K1 A stabilized steep approach.
IL.VIII.F.K2 Approach techniques and applicability.
IL.VIII.F.K3 Performance data and the height velocity (H/V) diagram.
IL.VIII.F.K4 Effects of atmospheric conditions on approach and landing performance.
IL.VIII.F.K5 Wind correction techniques.
IL.VIII.F.K6 Aircraft configuration.
IL.VIII.F.K7 Aircraft performance and limitations.
IL.VIII.F.K8 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.F.R1 Selection of the approach path and landing area.
IL.VIII.F.R2 Effects of.
IL.VIII.F.R2a a. Crosswind
IL.VIII.F.R2b b. Windshear
IL.VIII.F.R2c c. Tailwind
IL.VIII.F.R2d d. Wake turbulence
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.F.R2e e. Vortex ring state (VRS)
IL.VIII.F.R2f f. Landing point condition
IL.VIII.F.R3 Planning for.
IL.VIII.F.R3a a. Rejected landing and go-around
IL.VIII.F.R3b b. Powerplant failure during the approach
IL.VIII.F.R4 Landing in an area or in conditions where a takeoff/climb may not be possible.
IL.VIII.F.R5 Degraded Visual Environment (DVE) and flat light conditions.
IL.VIII.F.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.F.S1 Complete the appropriate checklist(s).
IL.VIII.F.S2 Position the flight controls, including the thrust vector, for the prevailing environmental conditions.
IL.VIII.F.S3 Maintain awareness of aircraft performance, limitations, and relative position throughout the maneuver.
IL.VIII.F.S4 Arrive over the touchdown point on the surface ±5 feet from intended landing point or, at the discretion of the evaluator, at a stabilized hover ±5 feet height.
IL.VIII.F.S5 Maintain proper ground track with crosswind correction, if necessary.
IL.VIII.F.S6 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.F.S7 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task G. Running/Roll-On Landing
Task G. Running/Roll-On Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands shallow approach and running/roll-on landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.VIII.G.K1 H/V diagram, if applicable.
IL.VIII.G.K2 Aircraft performance and limitations.
IL.VIII.G.K3 Aircraft configuration.
IL.VIII.G.K4 Effects of atmospheric conditions, including wind, on approach and landing performance.
IL.VIII.G.K5 Wind correction techniques on approach and landing.
IL.VIII.G.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.G.R1 Situations including:
IL.VIII.G.R1a a. Powerplant failure during approach
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.G.R1b b. Rejected landing
IL.VIII.G.R2 Effects of:
IL.VIII.G.R2a a. Crosswind
IL.VIII.G.R2b b. Windshear
IL.VIII.G.R2c c. Tailwind
IL.VIII.G.R2d d. Wake turbulence
IL.VIII.G.R2e e. Runway surface/condition
IL.VIII.G.R3 Collision hazards.
IL.VIII.G.R4 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
IL.VIII.G.R5 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.G.S1 Coordinate with crew, if applicable, and complete the approach and landing checklists.
IL.VIII.G.S2 Ensure the aircraft is correctly configured for the landing.
IL.VIII.G.S3 Comply with air traffic control (ATC) or evaluator instructions and make radio calls as appropriate.
IL.VIII.G.S4 Maintain a ground track that ensures the desired traffic pattern flown takes into consideration obstructions and air traffic control (ATC) or evaluator instructions.
IL.VIII.G.S5 Ensure the aircraft is aligned with the correct/assigned runway or landing surface.
IL.VIII.G.S6 Consider the wind conditions, aircraft performance, landing surface, obstructions, and select a suitable touchdown point.
IL.VIII.G.S7 Maintain crosswind correction and directional control throughout the approach and landing.
IL.VIII.G.S8 Make smooth, timely, and correct control application during round out and touchdown.
IL.VIII.G.S9 Touch down at the appropriate speed, aircraft configuration and pitch attitude.
IL.VIII.G.S10 On touchdown, maintain proper ground track.
IL.VIII.G.S11 After touchdown, reconfigure the aircraft for surface/hover taxi.
IL.VIII.G.S12 Execute a timely go-around for any condition that may result in an unsafe approach or landing.
IL.VIII.G.S13 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.G.S14 Analyze and correct common errors related to this Task.
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds › Task H. Go-Around/Rejected Landing
Task H. Go-Around/Rejected Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands go-around/rejected landing with emphasis on factors that contribute to landing conditions that may require a go-around, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
Area of Operation VIII. Takeoffs, Landings, and Go-Arounds
IL.VIII.H.K1 Situations and considerations on approach that could require a go-around/rejected landing.
IL.VIII.H.K2 Effects of atmospheric conditions on a go-around or rejected landing.
IL.VIII.H.K3 Aircraft configuration changes and techniques for the go-around.
IL.VIII.H.K4 Go-around/rejected landing procedures, the importance of a timely decision, and appropriate airspeeds for the maneuver.
IL.VIII.H.K5 Wind correction techniques.
IL.VIII.H.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.VIII.H.R1 Recognition of the need for a go-around/rejected landing.
IL.VIII.H.R2 Aircraft performance.
IL.VIII.H.R3 Application of power.
IL.VIII.H.R4 Aircraft configuration.
IL.VIII.H.R5 Collision hazards.
IL.VIII.H.R6 Low altitude maneuvering, including stall or controlled flight into terrain (CFIT).
IL.VIII.H.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.VIII.H.S1 Make a timely decision to go-around/reject the landing.
IL.VIII.H.S2 Apply the appropriate power setting for the flight condition and establish an aircraft configuration necessary to obtain the desired performance.
IL.VIII.H.S3 Establish a positive rate of climb and the appropriate airspeed ±10 knots.
IL.VIII.H.S4 Configure the aircraft, as appropriate.
IL.VIII.H.S5 Maintain the ground track, heading, or course appropriate for the conditions, or as specified by air traffic control (ATC) or the evaluator.
IL.VIII.H.S6 Notify/coordinate with air traffic control (ATC) or evaluator instructions as required.
IL.VIII.H.S7 Complete the appropriate checklist(s).
IL.VIII.H.S8 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.VIII.H.S9 Analyze and correct common errors related to this Task.
Area of Operation IX. Fundamentals of Flight › Task A. Straight-and-Level Flight
Area of Operation IX. Fundamentals of Flight
Area of Operation IX. Fundamentals of Flight
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Straight-and-Level Flight
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands straight-and-level flight, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.IX.A.K1 Basic elements of the aircraft and aerodynamics that affect the ability to maintain straight-and-level flight.
IL.IX.A.K2 Flight control and trim use, if applicable.
IL.IX.A.K3 The pilot's visual references when performing the maneuver.
IL.IX.A.K4 Integrated flight instruction.
IL.IX.A.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.IX.A.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.IX.A.R2 Collision hazards.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.IX.A.S1 Establish and maintain straight-and-level flight.
IL.IX.A.S2 Analyze and correct common errors related to this Task.
Area of Operation IX. Fundamentals of Flight › Task B. Level Turns
Task B. Level Turns
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands level turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.IX.B.K1 Purpose of and procedures for level turns.
IL.IX.B.K2 Flight control and trim use, if applicable.
IL.IX.B.K3 The pilot's visual references when performing the maneuver.
IL.IX.B.K4 Integrated flight instruction.
IL.IX.B.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.IX.B.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
Area of Operation IX. Fundamentals of Flight
IL.IX.B.R2 Collision hazards.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.IX.B.S1 Establish, maintain, and roll out of a level turn.
IL.IX.B.S2 Analyze and correct common errors related to this Task.
Area of Operation IX. Fundamentals of Flight › Task C. Straight Climbs and Climbing Turns
Task C. Straight Climbs and Climbing Turns
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands straight climbs and climbing turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.IX.C.K1 Purpose of and procedures for straight climbs and climbing turns.
IL.IX.C.K2 Flight control and trim use, if applicable.
IL.IX.C.K3 The pilot's visual references when performing the maneuver.
IL.IX.C.K4 Integrated flight instruction.
IL.IX.C.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.IX.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.IX.C.R2 Collision hazards.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.IX.C.S1 Establish, maintain, and level off from climbs and climbing turns.
IL.IX.C.S2 Analyze and correct common errors related to this Task.
Area of Operation IX. Fundamentals of Flight › Task D. Straight Descents and Descending Turns
Task D. Straight Descents and Descending Turns
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands straight descents and descending turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.IX.D.K1 Purpose of and procedures for straight descents and descending turns.
IL.IX.D.K2 Flight control and trim use, if applicable.
IL.IX.D.K3 The pilot's visual references when performing the maneuver.
IL.IX.D.K4 Integrated flight instruction.
IL.IX.D.K5 Common errors related to this Task.
Area of Operation IX. Fundamentals of Flight
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.IX.D.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.IX.D.R2 Collision hazards.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.IX.D.S1 Establish, maintain, and level off from straight descents and descending turns.
IL.IX.D.S2 Analyze and correct common errors related to this Task.
Area of Operation X. Performance Maneuvers › Task A. Rapid Deceleration/Quick Stop
Area of Operation X. Performance Maneuvers
Area of Operation X. Performance Maneuvers
Task A. Rapid Deceleration/Quick Stop
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands rapid deceleration/quick stop, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.X.A.K1 Purpose of the maneuver.
IL.X.A.K2 Aircraft transmission and powerplant limitations.
IL.X.A.K3 Airspeed limitations.
IL.X.A.K4 Aircraft maximum rate deceleration rate and technique.
IL.X.A.K5 Height velocity (H/V) awareness.
IL.X.A.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.X.A.R1 Gaining or losing altitude.
IL.X.A.R2 Excessive pitch attitudes.
IL.X.A.R3 Effects of wind.
IL.X.A.R4 Airframe and airspeed limitations.
IL.X.A.R5 Collision hazards.
IL.X.A.R6 Dividing attention between aircraft control and orientation.
IL.X.A.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.X.A.R8 Uncoordinated flight.
IL.X.A.R9 Vortex ring state (VRS).
Skills: The applicant demonstrates and simultaneously explains how to:
IL.X.A.S1 Complete the appropriate checklist(s).
IL.X.A.S2 Clear the area.
IL.X.A.S3 Maintain heading throughout the maneuver, ±5°.
IL.X.A.S4 Perform a maximum performance deceleration as directed by the evaluator.
IL.X.A.S5 Select an appropriate power setting and thrust vector to allow deceleration at maximum rate.
IL.X.A.S6 Maintain coordinated flight throughout the maneuver.
IL.X.A.S7 Analyze and correct common errors related to this Task.
Area of Operation X. Performance Maneuvers
Area of Operation X. Performance Maneuvers › Task B. Inflight Conversion During Straight-and-Level Flight
Task B. Inflight Conversion During Straight-and-Level Flight
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands converting from thrust-borne configuration to wing-borne configuration, and returning to thrust-borne configuration, and can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.X.B.K1 Procedures for changing aircraft configuration.
IL.X.B.K2 Aerodynamic effects of changing aircraft configuration.
IL.X.B.K3 Flight control operation when converting from thrust-borne to wing-borne configuration, and when converting from wing-borne to thrust-borne configuration, while in straight-and-level flight.
IL.X.B.K4 Aircraft performance and limitation charts.
IL.X.B.K5 Factors related to weight and balance and center of gravity (CG) envelopes.
IL.X.B.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.X.B.R1 Aircraft performance limitations.
IL.X.B.R2 Powerplant failure during conversion.
IL.X.B.R3 Aerodynamic stall.
IL.X.B.R4 Effects of gross weight and CG.
IL.X.B.R5 Rapid configuration or thrust vector changes.
IL.X.B.R6 Altitude variation/vertical speed.
IL.X.B.R7 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.X.B.R8 Other hazards specific to the powered-lift make and model.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.X.B.S1 Convert from thrust-borne configuration to wing-borne configuration during straight-and-level flight.
IL.X.B.S2 Convert the aircraft from wing-borne configuration to thrust-borne configuration during straight-andlevel flight.
IL.X.B.S3 Utilize proper control technique throughout the maneuver.
IL.X.B.S4 Maintain awareness of aircraft performance, limitations, and relative position throughout the maneuver.
IL.X.B.S5 Maintain altitude ±100 feet and specified heading ±10° throughout the operation. Achieve and maintain targeted airspeed ±10 knots.
IL.X.B.S6 Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IL.X.B.S7 Use the appropriate checklist, if applicable.
IL.X.B.S8 Analyze and correct common errors related to this Task.
Area of Operation X. Performance Maneuvers
Area of Operation X. Performance Maneuvers › Task C. Steep Turns
Task C. Steep Turns
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands steep turns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.X.C.K1 Purpose of and procedures for steep turn.
IL.X.C.K2 Pilot sensations and control forces.
IL.X.C.K3 Aerodynamics associated with steep turns, including:
IL.X.C.K3a a. Maintaining coordinated flight
IL.X.C.K3b b. Overbanking tendencies
IL.X.C.K3c c. Maneuvering speed, including the impact of weight changes
IL.X.C.K3d d. Load factor and accelerated stalls
IL.X.C.K3e e. Rate and radius of turn
IL.X.C.K4 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.X.C.R1 Dividing attention between aircraft control and orientation.
IL.X.C.R2 Collision hazards.
IL.X.C.R3 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
IL.X.C.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.X.C.R5 Uncoordinated flight.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.X.C.S1 Clear the area.
IL.X.C.S2 Establish the manufacturer's recommended airspeed; or if one is not available, an airspeed not to exceed maneuvering speed (VA).
IL.X.C.S3 Roll into a coordinated 360° steep turn as selected by the evaluator and according to the aircraft's operating limitations.
IL.X.C.S4 Perform the maneuver in the opposite direction.
IL.X.C.S5 Maintain the entry altitude ±100 feet, airspeed ±10 knots, bank ±5°, and roll out on the entry heading ±10°.
IL.X.C.S6 Analyze and correct common errors related to this Task.
Area of Operation XI. Ground Reference Maneuvers › Task A. Ground Reference Maneuvers
Area of Operation XI. Ground Reference Maneuvers
Area of Operation XI. Ground Reference Maneuvers
Task A. Ground Reference Maneuvers
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25; Flight Manual
Objective: To determine the applicant understands ground reference maneuvers, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: The evaluator selects at least one ground reference maneuver for the applicant to demonstrate.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
IL.XI.A.K1 Purpose of and procedures for ground reference maneuvers.
IL.XI.A.K2 Effects of wind on ground track and relation to a ground reference.
IL.XI.A.K3 Effects of bank angle and groundspeed on rate and radius of turn.
IL.XI.A.K4 Relationship of rectangular course to airport traffic pattern.
IL.XI.A.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
IL.XI.A.R1 Division of attention between aircraft control and orientation.
IL.XI.A.R2 Collision hazards.
IL.XI.A.R3 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
IL.XI.A.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
IL.XI.A.R5 Uncoordinated flight.
Skills: The applicant demonstrates and simultaneously explains how to:
IL.XI.A.S1 Clear the area.
IL.XI.A.S2 Select a suitable ground reference area, line, or point as appropriate.
IL.XI.A.S3 Plan the maneuver:
IL.XI.A.S3a a. Rectangular course: enter a left or right pattern, 600 to 1,000 feet above ground level (AGL) at
an appropriate distance from the selected reference area, 45° to the downwind leg
IL.XI.A.S3b b. S-turns: enter perpendicular to the selected reference line, 600 to 1,000 feet AGL at an
appropriate distance from the selected reference area
IL.XI.A.S3c c. Turns around a point: enter at an appropriate distance from the reference point, 600 to 1,000
feet AGL at an appropriate distance from the selected reference area
Continue reading ↓ 120 of 221 passages shown