FAA-S-ACS-25 Flight Instructor for Airplane Category Airman Certification Standards
Flight Instructor for Airplane Category
Airman Certification Standards
FAA-S-ACS-25
Flight Standards Service
Washington, DC 20591
November 2023
Flight Instructor for Airplane Category ACS (FAA-S-ACS-25) i
Foreword
The U.S. Department of Transportation, Federal Aviation Administration (FAA), Office of Safety Standards, Regulatory Support Division, Airman Testing Standards Branch, has published the Flight Instructor for Airplane Category Airman Certification Standards (ACS) to communicate the aeronautical knowledge, risk management, and flight proficiency standards for the Flight Instructor Certificate in the airplane category.
This ACS is available for download, in PDF format, from www.faa.gov.
Comments regarding this ACS may be emailed to [email protected].
Material in FAA-S-ACS-25 supersedes FAA-S-8081-6D, Flight Instructor Practical Test Standards for Airplane, dated June 2012.
The FAA created FAA-G-ACS-2, Airman Certification Standards Companion Guide for Pilots, to provide guidance considered relevant and useful to the community. The number of appendices in the ACS was reduced and much of the non-regulatory material was moved to the Airman Certification Standards Companion Guide for Pilots. Applicants, instructors, and evaluators should consult this companion guide to familiarize themselves with ACS procedures. FAA-G-ACS-2 is available for download, in PDF format, from www.faa.gov.
Flight Instructor for Airplane Category ACS (FAA-S-ACS-25) ii
Revision History
Document # Description Date
FAA-S-8081-6D Flight Instructor Practical Test Standards for Airplane (with Changes 1-6) June 2012
FAA-S-ACS-25 Flight Instructor for Airplane Category Airman Certification Standards November 2023
iii Flight Instructor for Airplane Category ACS (FAA-S-ACS-25)
Introduction
Airman Certification Standards Concept … 1
Area of Operation I. Fundamentals of Instructing
Task A. Effects of Human Behavior and Communication on the Learning Process … 2 Task B. Learning Process … 3 Task C. Course Development, Lesson Plans, and Classroom Training Techniques … 4 Task D. Student Evaluation, Assessment, and Testing … 5 Task E. Elements of Effective Teaching in a Professional Environment … 6 Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention … 7
Area of Operation II. Technical Subject Areas
Task A. Human Factors … 9 Task B. Visual Scanning and Collision Avoidance … 10 Task C. Runway Incursion Avoidance … 10 Task D. Principles of Flight … 11 Task E. Aircraft Flight Controls and Operation of Systems … 12 Task F. Performance and Limitations … 13 Task G. National Airspace System … 14 Task H. Navigation Systems and Radar Services … 14 Task I. Navigation and Cross-Country Flight Planning … 15 Task J. 14 CFR and Publications … 16 Task K. Endorsements and Logbook Entries … 17 Task L. Water and Seaplane Characteristics, Seaplane Bases, Maritime Rules, and Aids to Marine
Navigation (ASES, AMES) … 17
Task M. Night Operations … 19 Task N. High Altitude Operations - Supplemental Oxygen … 19 Task O. High Altitude Operations - Pressurization … 20 Task P. One Engine Inoperative (OEI) Performance (AMEL, AMES) … 21
Area of Operation III. Preflight Preparation
Task A. Pilot Qualifications … 23 Task B. Airworthiness Requirements … 23 Task C. Weather Information … 24
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Task A. Maneuver Lesson … 26
Table of Contents
iv
Table of Contents
Area of Operation V. Preflight Procedures
Task A. Preflight Assessment … 27 Task B. Flight Deck Management … 27 Task C. Engine Starting … 28 Task D. Taxiing, Airport Signs, and Lighting (ASEL, AMEL) … 29 Task E. Taxiing and Sailing (ASES, AMES) … 30 Task F. Before Takeoff Check … 31
Area of Operation VI. Airport and Seaplane Base Operations
Task A. Communications, Light Signals, and Runway Lighting Systems … 32 Task B. Traffic Patterns … 32
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Task A. Normal Takeoff and Climb … 34 Task B. Normal Approach and Landing … 35 Task C. Soft-Field Takeoff and Climb (ASEL) … 37 Task D. Soft-Field Approach and Landing (ASEL) … 38 Task E. Short-Field Takeoff and Maximum Performance Climb (ASEL, AMEL) … 39 Task F. Short-Field Approach and Landing (ASEL, AMEL) … 41 Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES) … 42 Task H. Confined Area Approach and Landing (ASES, AMES) … 44 Task I. Glassy Water Takeoff and Climb (ASES, AMES) … 45 Task J. Glassy Water Approach and Landing (ASES, AMES) … 46 Task K. Rough Water Takeoff and Climb (ASES, AMES) … 47 Task L. Rough Water Approach and Landing (ASES, AMES) … 49 Task M. Slip to a Landing (ASEL, ASES) … 50 Task N. Go-Around/Rejected Landing … 52 Task O. Power-Off 180° Accuracy Approach and Landing (ASEL, ASES) … 53
Area of Operation VIII. Fundamentals of Flight
Task A. Straight-and-Level Flight … 55 Task B. Level Turns … 55 Task C. Straight Climbs and Climbing Turns … 56 Task D. Straight Descents and Descending Turns … 56
Area of Operation IX. Performance and Ground Reference Maneuvers
Task A. Steep Turns … 58 Task B. Steep Spiral (ASEL, ASES) … 59 Task C. Chandelles (ASEL, ASES) … 59 Task D. Lazy Eights (ASEL, ASES) … 61 Task E. Ground Reference Maneuvers … 62
v
Table of Contents
Task F. Eights on Pylons (ASEL, ASES) … 63
Area of Operation X. Slow flight, Stalls, and Spins
Task A. Maneuvering During Slow Flight … 64 Task B. Demonstration of Flight Characteristics at Various Configurations and Airspeeds (ASEL and
ASES) … 65 Task C. Power-Off Stalls … 67 Task D. Power-On Stalls … 68 Task E. Accelerated Stalls … 69 Task F. Cross-Controlled Stall Demonstration (ASEL, ASES) … 70 Task G. Elevator Trim Stall Demonstration (ASEL, ASES) … 71 Task H. Secondary Stall Demonstration (ASEL, ASES) … 72 Task I. Spin Awareness and Spins … 73
Area of Operation XI. Basic Instrument Maneuvers
Task A. Straight-and-Level Flight … 75 Task B. Constant Airspeed Climbs … 75 Task C. Constant Airspeed Descents … 76 Task D. Turns to Headings … 77 Task E. Recovery from Unusual Flight Attitudes … 78
Area of Operation XII. Emergency Operations
Task A. Emergency Descent … 80 Task B. Emergency Approach and Landing (Simulated) (ASEL, ASES) … 80 Task C. Systems and Equipment Malfunctions … 82 Task D. Emergency Equipment and Survival Gear … 82 Task E. Engine Failure During Takeoff Before VMC (Simulated) (AMEL, AMES) … 83 Task F. Engine Failure After Liftoff (Simulated) (AMEL, AMES) … 84 Task G. Approach and Landing with an Inoperative Engine (Simulated)(AMEL, AMES) … 85
Area of Operation XIII. Multiengine Operations
Task A. Maneuvering with One Engine Inoperative (AMEL, AMES) … 87 Task B. VMC Demonstration (AMEL, AMES) … 88 Task C. Demonstration of Effects of Various Airspeeds and Configurations during Engine Inoperative
Performance (AMEL and AMES) … 89
Area of Operation XIV. Postflight Procedures
Task A. After Landing, Parking, and Securing (ASEL, AMEL) … 91 Task B. Seaplane Post-Landing Procedures (ASES, AMES) … 91
Appendix 1: Practical Test Roles, Responsibilities, and Outcomes
Eligibility Requirements for a Flight Instructor Certificate … 93
vi
Table of Contents
Use of the ACS During a Practical Test … 93 Instructor Responsibilities … 94 Evaluator Responsibilities … 94 Possible Outcomes of the Test … 95 Additional Rating Task Table … 96 Addition of an Airplane Single-Engine Rating to an Existing Flight Instructor Certificate … 97 Addition of an Airplane Multiengine Rating to an Existing Flight Instructor Certificate … 98 Flight Instructor Renewal/Reinstatement … 99
Appendix 2: Safety of Flight
General … 100 Stall and Spin Awareness … 100 Use of Checklists … 100 Positive Exchange of Flight Controls … 100
Use of Distractions … 100 Aeronautical Decision-Making, Risk Management, Crew Resource Management, and Single-Pilot
Resource Management … 100 Multiengine Considerations … 101 Single-Engine Considerations … 101
Appendix 3: Aircraft, Equipment, and Operational Requirements & Limitations
Aircraft Requirements & Limitations … 102 Equipment Requirements & Limitations … 102 Use of Flight Simulation Training Devices (FSTD) … 102 Credit for Pilot Time in an FSTD … 102 Use of Aviation Training Devices (ATD) … 102 Credit for Pilot Time in an ATD … 102 Operational Requirements, Limitations, & Task Information … 103
1 Flight Instructor for Airplane Category ACS (FAA-S-ACS-25)
Introduction › Airman Certification Standards Concept
Introduction
Airman Certification Standards Concept
The goal of the airman certification process is to ensure the applicant possesses the knowledge, ability to manage risks, and skill consistent with the privileges of the certificate or rating being exercised, in order to act as pilot-in-command (PIC).
Safe operations in today’s National Airspace System (NAS) require the integration of aeronautical knowledge, risk management, and flight proficiency standards. To accomplish these goals, the FAA drew upon the expertise of organizations and individuals across the aviation and training community to develop the ACS. The ACS integrates the elements of knowledge, risk management, and skill required for each airman certificate or rating. It thus forms a more comprehensive standard for what an applicant must know, consider, and do to demonstrate proficiency to pass the tests required for issuance of the applicable airman certificate or rating.
Area of Operation I. Fundamentals of Instructing
Area of Operation I. Fundamentals of Instructing
Area of Operation I. Fundamentals of Instructing
Note: The evaluator must select Task E, Task F, and at least one other Task for initial flight instructor applicants. During a practical test for an added flight instructor rating or flight instructor reinstatement, the evaluator has discretion to evaluate the applicant on Fundamentals of Instructing.
Area of Operation I. Fundamentals of Instructing › Task A.
Task A. Effects of Human Behavior and Communication on the Learning Process
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands human behavior and effective communication, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.A.K1 Elements of human behavior, including:
FI.I.A.K1a a. Definitions of human behavior
FI.I.A.K1b b. Instructor and learner relationship
FI.I.A.K1c c. Motivation
FI.I.A.K1d d. Human needs
FI.I.A.K1e e. Defense mechanisms
FI.I.A.K2 Learner emotional reactions, including:
FI.I.A.K2a a. Anxiety and stress
FI.I.A.K2b b. Impatience
FI.I.A.K2c c. Worry or lack of interest
FI.I.A.K2d d. Physical discomfort, illness, fatigue, and dehydration
FI.I.A.K2e e. Apathy due to inadequate instruction
FI.I.A.K3 Teaching the adult learner.
FI.I.A.K4 Effective communication, including:
FI.I.A.K4a a. Basic elements of communication
FI.I.A.K4b b. Barriers to effective communication
FI.I.A.K4c c. Developing communication skills
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.A.R1 Recognizing and accommodating human behavior.
FI.I.A.R2 Barriers to communication.
Skills: The applicant exhibits the skill to:
FI.I.A.S1 Give examples of how human behavior affects motivation and learning.
FI.I.A.S2 Describe what the instructor can do to deal with:
FI.I.A.S2a a. Serious abnormal emotional behavior
Area of Operation I. Fundamentals of Instructing
FI.I.A.S2b b. Defense mechanisms
FI.I.A.S3 Use effective communication in ground and flight instruction.
Area of Operation I. Fundamentals of Instructing › Task B. Learning Process
Task B. Learning Process
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands the learning process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.B.K1 Definitions of learning.
FI.I.B.K2 Learning theory as it applies to ground and flight instruction, including:
FI.I.B.K2a a. Behaviorism
FI.I.B.K2b b. Cognitive Theory
FI.I.B.K3 Perceptions and insight.
FI.I.B.K4 Acquiring knowledge.
FI.I.B.K5 Laws of learning.
FI.I.B.K6 Domains of learning, including:
FI.I.B.K6a a. Cognitive
FI.I.B.K6b b. Affective
FI.I.B.K6c c. Psychomotor
FI.I.B.K7 Characteristics of learning.
FI.I.B.K8 Scenario-based training (SBT).
FI.I.B.K9 Acquiring skill knowledge, including:
FI.I.B.K9a a. Stages
FI.I.B.K9b b. Knowledge of results
FI.I.B.K9c c. How to develop skills
FI.I.B.K9d d. Learning plateaus
FI.I.B.K10 Types of practice.
FI.I.B.K11 Evaluation versus critique.
FI.I.B.K12 Distractions, interruptions, fixation, and inattention.
FI.I.B.K13 Errors.
FI.I.B.K14 Memory, including:
FI.I.B.K14a a. Sensory
FI.I.B.K14b b. Short-Term Memory (STM) and Long-Term Memory (LTM)
Area of Operation I. Fundamentals of Instructing
FI.I.B.K14c c. How usage affects memory
FI.I.B.K14d d. Forgetting
FI.I.B.K15 Retention of learning.
FI.I.B.K16 Transfer of learning.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.B.R1 Inadequate or incomplete instruction.
FI.I.B.R2 Lack of learner motivation.
FI.I.B.R3 Recognizing and correcting learner errors.
Skills: The applicant exhibits the skill to:
FI.I.B.S1 Apply educational theories to ground and flight instruction.
FI.I.B.S2 Recognize and correct conditions that undermine the learning process.
FI.I.B.S3 Plan for and use techniques, including realistic distractions that teach flight students how to manage a workload.
Area of Operation I. Fundamentals of Instructing › Task C.
Task C. Course Development, Lesson Plans, and Classroom Training Techniques
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands the teaching process, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.C.K1 Teaching, including:
FI.I.C.K1a a. Process
FI.I.C.K1b b. Essential skills
FI.I.C.K2 Course of training.
FI.I.C.K3 Preparation of a lesson, including:
FI.I.C.K3a a. Training objectives and completion standards
FI.I.C.K3b b. Performance-based objectives
FI.I.C.K3c c. Importance of Airman Certification Standards (ACS) in aviation training curricula
FI.I.C.K3d d. Decision-based objectives
FI.I.C.K4 Organization of material.
FI.I.C.K5 Training delivery methods, including:
FI.I.C.K5a a. Lecture
FI.I.C.K5b b. Discussion
FI.I.C.K5c c. Guided discussion
Area of Operation I. Fundamentals of Instructing
FI.I.C.K5d d. Cooperative or group learning
FI.I.C.K5e e. Demonstration-performance
FI.I.C.K5f f. Drill and practice
FI.I.C.K6 Electronic learning (e-Learning).
FI.I.C.K7 Instructional aids and training technologies, including:
FI.I.C.K7a a. Characteristics of effective instructional aids
FI.I.C.K7b b. Reasons for use
FI.I.C.K7c c. Guidelines for use
FI.I.C.K7d d. Types
FI.I.C.K8 Integrated flight instruction.
FI.I.C.K9 Problem-based instruction.
FI.I.C.K10 Planning instructional activity, including:
FI.I.C.K10a a. Blocks of learning
FI.I.C.K10b b. Training syllabus
FI.I.C.K10c c. Lesson plans
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.C.R1 Selection of teaching method.
Skills: The applicant exhibits the skill to:
FI.I.C.S1 Prepare an instructional lesson plan using teaching methods and materials appropriate for Task and learner characteristics, including:
FI.I.C.S1a a. Aeronautical knowledge ground lesson applicable for a classroom
FI.I.C.S1b b. Maneuver introduction and ground lesson
Area of Operation I. Fundamentals of Instructing › Task D. Student Evaluation, Assessment, and Testing
Task D. Student Evaluation, Assessment, and Testing
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands evaluation and testing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.D.K1 Purpose and characteristics of effective assessment.
FI.I.D.K2 Traditional assessments.
FI.I.D.K3 Authentic assessments, including:
FI.I.D.K3a a. Learner-centered assessment
FI.I.D.K3b b. Maneuver or procedure grades
Area of Operation I. Fundamentals of Instructing
FI.I.D.K3c c. Assessing risk management skills
FI.I.D.K4 Choosing an effective assessment method.
FI.I.D.K5 Purposes and types of critiques.
FI.I.D.K6 Oral assessment, including:
FI.I.D.K6a a. Characteristics of effective questions
FI.I.D.K6b b. Types of questions to avoid
FI.I.D.K6c c. Answering learner questions
FI.I.D.K7 Assessment of piloting ability.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.D.R1 Delivering an assessment.
Skills: The applicant exhibits the skill to:
FI.I.D.S1 Use appropriate methods and techniques to assess learner performance in ground or flight training.
Area of Operation I. Fundamentals of Instructing › Task E. Elements of Effective Teaching in a Professional Environment
Task E. Elements of Effective Teaching in a Professional Environment
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands effects of instructor behavior on effective teaching, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates understanding of:
FI.I.E.K1 Aviation instructor responsibilities, including:
FI.I.E.K1a a. Helping learners
FI.I.E.K1b b. Providing adequate instruction
FI.I.E.K1c c. Training to established standards of performance
FI.I.E.K1d d. Emphasizing the positive
FI.I.E.K1e e. Minimizing learner frustrations
FI.I.E.K2 Flight instructor responsibilities, including supervision and surveillance during training.
FI.I.E.K3 Flight instructor qualifications and professionalism.
FI.I.E.K4 Professional development.
FI.I.E.K5 Instructor ethics and conduct.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.E.R1 Fulfilling instructor responsibilities.
FI.I.E.R2 Exhibiting professionalism.
Area of Operation I. Fundamentals of Instructing
Skills: The applicant exhibits the skill to:
FI.I.E.S1 Deliver ground or flight instruction on an evaluator-assigned Task in a manner consistent with instructor responsibilities and professional characteristics as stated in K1 through K5.
Area of Operation I. Fundamentals of Instructing › Task F.
Task F. Elements of Effective Teaching that Include Risk Management and Accident Prevention
References: FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands teaching practical risk management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant understands and explains:
FI.I.F.K1 Teaching risk identification, assessment, and mitigation.
FI.I.F.K2 Teaching risk management tools, including:
FI.I.F.K2a a. Pilot/Aircraft/enVironment/External Pressures (PAVE) checklist
FI.I.F.K2b b. Flight Risk Assessment Tools (FRATs)
FI.I.F.K3 When and how to introduce risk management.
FI.I.F.K4 Risk management teaching techniques by phase of instruction.
FI.I.F.K5 Managing risk during flight instruction, including:
FI.I.F.K5a a. Common flight instruction risks
FI.I.F.K5b b. Best practices
FI.I.F.K5c c. Special considerations while teaching takeoffs and landings
FI.I.F.K6 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
FI.I.F.R1 Hazards associated with providing flight instruction.
FI.I.F.R2 Obstacles to maintaining situational awareness during flight instruction.
FI.I.F.R3 Recognizing and managing hazards arising from human behavior, including hazardous attitudes.
Skills: The applicant exhibits the skill to:
FI.I.F.S1 Use scenario-based training (SBT) to demonstrate, teach, and assess risk management and Aeronautical Decision-Making (ADM) skills in the context of a Task specified by the evaluator.
FI.I.F.S2 Identify, assess, and mitigate risks commonly associated with flight instruction by maintaining:
FI.I.F.S2a a. Awareness and oversight of the learner’s actions, with timely and appropriate supervision,
intervention, or mitigation as needed
FI.I.F.S2b b. Awareness of the learner’s cognitive/physiological state, with timely action to mitigate anxiety,
fatigue, or other obstruction to learning
FI.I.F.S2c c. Overall situational awareness of the aircraft’s dynamic state, its position in space, and
vigilance for unexpected events or changing circumstances that occur in the environment
Area of Operation I. Fundamentals of Instructing
FI.I.F.S3 Model and teach safety practices, including maintaining:
FI.I.F.S3a a. Collision avoidance while simultaneously providing instruction
FI.I.F.S3b b. Avoidance of unnecessary distractions
FI.I.F.S3c c. Coordinated flight
FI.I.F.S3d d. Awareness of who is manipulating controls through positive exchange of flight controls
FI.I.F.S3e e. Continuous awareness of the aircraft’s dynamic state and position in the NAS
Area of Operation II. Technical Subject Areas › Task A. Human Factors
Area of Operation II. Technical Subject Areas
Area of Operation II. Technical Subject Areas
Note: The evaluator must select Tasks C, K, and at least one other Task from this Area of Operation. The evaluator must also select Task P for multiengine applicants.
Task A. Human Factors
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands personal health, flight physiology, aeromedical and human factors, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.A.K1 Symptoms, recognition, causes, effects, and corrective actions associated with aeromedical and physiological issues, including:
AI.II.A.K1a a. Hypoxia
AI.II.A.K1b b. Hyperventilation
AI.II.A.K1c c. Middle ear and sinus problems
AI.II.A.K1d d. Spatial disorientation
AI.II.A.K1e e. Motion sickness
AI.II.A.K1f f. Carbon monoxide poisoning
AI.II.A.K1g g. Stress
AI.II.A.K1h h. Fatigue
AI.II.A.K1i i. Dehydration and nutrition
AI.II.A.K1j j. Hypothermia
AI.II.A.K1k k. Optical illusions
AI.II.A.K1l l. Dissolved nitrogen in the bloodstream after scuba dives
AI.II.A.K2 Regulations regarding use of alcohol and drugs.
AI.II.A.K3 Effects of alcohol, drugs, and over-the-counter medications.
AI.II.A.K4 Aeronautical Decision-Making (ADM) to include using Crew Resource Management (CRM) or Single- Pilot Resource Management (SRM), as appropriate.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.A.R1 Aeromedical and physiological issues.
AI.II.A.R2 Hazardous attitudes.
AI.II.A.R3 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.II.A.R4 Confirmation and expectation bias.
Skills: The applicant demonstrates and simultaneously explains how to:
Area of Operation II. Technical Subject Areas
AI.II.A.S1 Associate the symptoms and effects for at least three of the conditions listed in K1a through K1l with the cause(s) and corrective action(s).
AI.II.A.S2 Perform self-assessment, including fitness for flight and personal minimums, for actual flight or a scenario given by the evaluator.
Area of Operation II. Technical Subject Areas › Task B. Visual Scanning and Collision Avoidance
Task B. Visual Scanning and Collision Avoidance
References: AC 90-48; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands visual scanning and collision avoidance, can apply that knowledge, manage associated risks, demonstrate pilot-in-command skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.B.K1 Environmental conditions that degrade vision.
AI.II.B.K2 Vestibular and visual illusions.
AI.II.B.K3 “See and Avoid” responsibilities.
AI.II.B.K4 Visual scanning procedure and the importance of peripheral vision.
AI.II.B.K5 Aircraft blind spots and clearing procedures.
AI.II.B.K6 Visual cues of an impending mid-air collision.
AI.II.B.K7 Situations that create the greatest collision risk.
AI.II.B.K8 Division of attention inside and outside the aircraft.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.B.R1 Distractions to visual scanning.
AI.II.B.R2 Relaxed intermediate focal distance.
AI.II.B.R3 High volume operational environments.
AI.II.B.R4 Collision reaction time.
AI.II.B.R5 Use of a safety pilot.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.B.S1 Effectively scan using short regularly spaced eye movements.
AI.II.B.S2 Scan around physical obstructions.
AI.II.B.S3 Use appropriate visual scanning techniques.
AI.II.B.S4 Use electronic traffic alert systems, if available.
Area of Operation II. Technical Subject Areas › Task C. Runway Incursion Avoidance
Task C. Runway Incursion Avoidance
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands runway incursion avoidance, can apply that knowledge, manage
Area of Operation II. Technical Subject Areas
associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.C.K1 Runway incursion definition.
AI.II.C.K2 Taxi instructions/clearances.
AI.II.C.K3 The importance of recording taxi instructions and reviewing taxi routes on the airport diagram.
AI.II.C.K4 Airport markings, signs, and lights including the importance of hold lines associated with runways.
AI.II.C.K5 Appropriate flight deck activities during taxiing, including taxi route planning, briefing the location of Hot Spots, communicating and coordinating with ATC.
AI.II.C.K6 Communication and operational procedures at uncontrolled airports.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.C.R1 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.II.C.R2 Confirmation or expectation bias as related to taxi instructions.
AI.II.C.R3 Entering or crossing runways.
AI.II.C.R4 Night taxi operations.
AI.II.C.R5 Low visibility taxi operations.
AI.II.C.R6 Runway incursion after landing.
AI.II.C.R7 Operating on taxiways between parallel runways.
Skills: The applicant demonstrates how to:
AI.II.C.S1 Deliver instruction on the elements and techniques for runway incursion avoidance.
Area of Operation II. Technical Subject Areas › Task D. Principles of Flight
Task D. Principles of Flight
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands aerodynamics appropriate to the desired instructor certificate, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.D.K1 Airfoil design characteristics.
AI.II.D.K2 Airplane stability, maneuverability and controllability.
AI.II.D.K3 Turning tendency (e.g., torque, p-factor, spiraling slipstream, and gyroscopic precession).
AI.II.D.K4 Forces acting on an airplane.
AI.II.D.K5 Load factors in airplane design.
AI.II.D.K6 Wingtip vortices and appropriate precautions.
Area of Operation II. Technical Subject Areas
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.D.R1 The basic aerodynamic principles of flight.
Skills: The applicant demonstrates how to:
AI.II.D.S1 Deliver instruction on principles of flight, including at least three of the elements listed in K1 through K6.
Area of Operation II. Technical Subject Areas › Task E. Aircraft Flight Controls and Operation of Systems
Task E. Aircraft Flight Controls and Operation of Systems
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands flight controls and systems on the airplane provided for the flight test, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If K1 is selected, the evaluator must assess the applicant's knowledge of all sub elements.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.E.K1 Airplane systems, including:
AI.II.E.K1a a. Primary flight controls
AI.II.E.K1b b. Secondary flight controls
AI.II.E.K1c c. Powerplant and propeller
AI.II.E.K1d d. Landing gear
AI.II.E.K1e e. Fuel, oil, and hydraulic
AI.II.E.K1f f. Electrical
AI.II.E.K1g g. Avionics
AI.II.E.K1h h. Pitot-static, vacuum/pressure, and associated flight instruments
AI.II.E.K1i i. Environmental
AI.II.E.K1j j. Deicing and anti-icing
AI.II.E.K1k k. Water rudders (ASES, AMES)
AI.II.E.K1l l. Oxygen system
AI.II.E.K2 Indications of and procedures for managing system abnormalities or failures.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.E.R1 Detection of system malfunctions or failures.
AI.II.E.R2 Management of a system failure.
AI.II.E.R3 Monitoring and management of automated systems.
AI.II.E.R4 Providing instruction in unfamiliar aircraft or operating with unfamiliar flight display systems and avionics.
Area of Operation II. Technical Subject Areas
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.E.S1 Operate at least three of the systems listed in K1a through K1l appropriately.
Area of Operation II. Technical Subject Areas › Task F. Performance and Limitations
Task F. Performance and Limitations
References: FAA-H-8083-1, FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands aircraft performance and limitations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.F.K1 Elements related to performance and limitations by explaining the use of charts, tables, and data to determine performance.
AI.II.F.K2 Factors affecting performance, including:
AI.II.F.K2a a. Atmospheric conditions
AI.II.F.K2b b. Pilot technique
AI.II.F.K2c c. Airplane configuration
AI.II.F.K2d d. Airport environment
AI.II.F.K2e e. Loading and weight and balance
AI.II.F.K3 Weight and balance terms, including: basic empty weight, maximum gross weight, arm, moment, reference datum, center of gravity (CG) and CG limits, and useful load.
AI.II.F.K4 Methods for computing CG.
AI.II.F.K5 Aerodynamics.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.F.R1 Use of performance charts, tables, and data.
AI.II.F.R2 Airplane limitations.
AI.II.F.R3 Possible differences between calculated performance and actual performance.
AI.II.F.R4 Exceeding weight limits.
AI.II.F.R5 Operating outside of CG limits.
AI.II.F.R6 Shifting, adding, and removing weight.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.F.S1 Use the appropriate airplane performance charts, tables, and data.
AI.II.F.S2 Compute the weight and balance, correct out-of-center of gravity loading errors and determine if the weight and balance remains within limits during all phases of flight.
Area of Operation II. Technical Subject Areas
Area of Operation II. Technical Subject Areas › Task G. National Airspace System
Task G. National Airspace System
References: 14 CFR parts 71, 91, 93; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; VFR Navigation Charts
Objective: To determine the applicant understands the National Airspace System, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.G.K1 Airspace classes and associated requirements and limitations.
AI.II.G.K2 Chart symbols.
AI.II.G.K3 Special use airspace (SUA), special flight rules areas (SFRA), temporary flight restrictions (TFR), and other airspace areas.
AI.II.G.K4 Currency of publications.
AI.II.G.K5 Special visual flight rules (VFR) requirements.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.G.R1 Various classes and types of airspace.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.G.S1 Identify and comply with the requirements for basic VFR weather minimums and flying in particular classes of airspace.
AI.II.G.S2 Correctly identify airspace and operate in accordance with associated communication and equipment requirements.
AI.II.G.S3 Identify the requirements for operating in SUA or within a TFR. Identify and comply with special air traffic rules (SATR) and SFRA operations, if applicable.
Area of Operation II. Technical Subject Areas › Task H. Navigation Systems and Radar Services
Task H. Navigation Systems and Radar Services
References: AC 91-78; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands navigation systems and radar services, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: The evaluator should reference the manufacturer’s equipment supplement(s) as necessary for appropriate limitations, procedures, etc.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.H.K1 Ground-based navigation (identification, orientation, course determination, equipment, tests, regulations, interference, appropriate use of navigation data, and signal integrity).
AI.II.H.K2 Satellite-based navigation (e.g., equipment, regulations, authorized use of databases, and Receiver Autonomous Integrity Monitoring (RAIM)).
AI.II.H.K3 Radar assistance to visual flight rules (VFR) aircraft (e.g., operations, equipment, available services, traffic advisories).
AI.II.H.K4 Transponder (Mode(s) A, C, and S) and Automatic Dependent Surveillance-Broadcast (ADS-B).
Area of Operation II. Technical Subject Areas
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.H.R1 Management of automated navigation and autoflight systems.
AI.II.H.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.II.H.R3 Limitations of the navigation system in use.
AI.II.H.R4 Loss of a navigation signal.
AI.II.H.R5 Use of an electronic flight bag (EFB), if used.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.H.S1 Use an airborne electronic navigation system.
AI.II.H.S2 Determine the airplane's position using the navigation system.
AI.II.H.S3 Intercept and track a given course, radial, or bearing.
AI.II.H.S4 Recognize and describe the indication of station or waypoint passage.
AI.II.H.S5 Use proper communication procedures when utilizing radar services.
Area of Operation II. Technical Subject Areas › Task I. Navigation and Cross-Country Flight Planning
Task I. Navigation and Cross-Country Flight Planning
References: 14 CFR part 91; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25, NOTAMs; VFR Navigation Charts
Objective: To determine the applicant understands navigation and cross-country flight planning, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: Preparation, presentation, and explanation of a computer-generated flight plan is an acceptable option.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.I.K1 Route planning, including consideration of different classes and special use airspace (SUA) and selection of appropriate and available navigation/communication systems and facilities.
AI.II.I.K2 Altitude selection accounting for terrain and obstacles, glide distance of airplane, visual flight rules (VFR) cruising altitudes, and effect of wind.
AI.II.I.K3 Plotting a course.
AI.II.I.K4 Power setting selection.
AI.II.I.K5 Calculating:
AI.II.I.K5a a. Time, climb and descent rates, course, distance, heading, true airspeed, and groundspeed
AI.II.I.K5b b. Estimated time of arrival, including conversion to universal coordinated time (UTC)
AI.II.I.K5c c. Fuel requirements, including reserve
AI.II.I.K6 Elements of a VFR flight plan.
AI.II.I.K7 Correlate weather information to make a go/no-go decision.
AI.II.I.K8 Procedures for activating and closing a VFR flight plan.
Area of Operation II. Technical Subject Areas
AI.II.I.K9 Magnetic compass errors.
AI.II.I.K10 Pilotage and dead reckoning.
AI.II.I.K11 Planned calculations versus actual results and required corrections.
AI.II.I.K12 Diversion and lost procedures.
AI.II.I.K13 Inflight intercept procedures.
AI.II.I.K14 Use of an electronic flight bag (EFB), if used.
AI.II.I.K15 Chart symbols.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.I.R1 Pilot.
AI.II.I.R2 Aircraft.
AI.II.I.R3 Environment (e.g., weather, airports, airspace, terrain, obstacles).
AI.II.I.R4 External pressures.
AI.II.I.R5 Limitations of air traffic control (ATC) services.
AI.II.I.R6 Fuel planning.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.I.S1 Prepare, present, and explain a cross-country flight plan assigned by the evaluator, including a risk analysis to the first fuel stop.
AI.II.I.S2 Apply pertinent information from appropriate and current aeronautical charts, Chart Supplements; Notices to Air Missions (NOTAMs) relative to airport, runway and taxiway closures; and other flight publications.
AI.II.I.S3 Create a navigation plan and simulate filing a VFR flight plan.
AI.II.I.S4 Recalculate fuel reserves based on a scenario provided by the evaluator.
Area of Operation II. Technical Subject Areas › Task J. 14 CFR and Publications
Task J. 14 CFR and Publications
References: 14 CFR parts 1, 61, 91; 49 CFR part 830; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands the Code of Federal Regulations and other relevant publications, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.J.K1 14 CFR parts 1, 61, and 91.
AI.II.J.K2 49 CFR part 830.
AI.II.J.K3 Advisory Circulars, INFOs, and SAFOs.
AI.II.J.K4 Airman Certification Standards or Practical Test Standards.
Area of Operation II. Technical Subject Areas
AI.II.J.K5 Pilot's Operating Handbooks or flight manuals.
AI.II.J.K6 Aeronautical Information Manual (AIM).
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.J.R1 Use of expired charts, manuals, or publications without current updates.
Skills: The applicant demonstrates how to:
AI.II.J.S1 Teach at least one of the elements listed in K1 through K6.
Area of Operation II. Technical Subject Areas › Task K. Endorsements and Logbook Entries
Task K. Endorsements and Logbook Entries
References: 14 CFR part 61; AC 61-65; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands logbook entries and endorsements, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.K.K1 Required logbook entries for instruction given.
AI.II.K.K2 Required student pilot pre-solo knowledge test, solo endorsements, and logbook entries.
AI.II.K.K3 Other required pilot logbook endorsements (e.g., Class B Airspace, Special Federal Aviation Regulation (SFAR)).
AI.II.K.K4 Preparation of a recommendation for a pilot practical test, including appropriate logbook entry and relevant certificate/rating application for:
AI.II.K.K4a a. Initial pilot certification
AI.II.K.K4b b. Additional pilot certification
AI.II.K.K4c c. Additional aircraft qualification
AI.II.K.K5 Endorsement of a pilot logbook for the satisfactory completion of an FAA flight review.
AI.II.K.K6 Required flight instructor records.
AI.II.K.K7 Flight instructor renewal and reinstatement requirements.
Risk Management: The applicant is able to identify, assess, and mitigate risk associated with:
AI.II.K.R1 Endorsements without appropriate limitations or expiration dates.
Skills: The applicant demonstrates how to:
AI.II.K.S1 Describe and prepare logbook entries/endorsements required for at least two of the events specified in the elements or sub-elements of K1 through K5.
Area of Operation II. Technical Subject Areas › Task L.
Task L. Water and Seaplane Characteristics, Seaplane Bases, Maritime Rules, and Aids to Marine
Navigation (ASES, AMES)
References: AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; USCG Navigation Rules
Area of Operation II. Technical Subject Areas
Objective: To determine the applicant understands water and seaplane characteristics, seaplane bases, maritime rules, and aids to marine navigation, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.L.K1 Characteristics of a water surface as affected by features, such as:
AI.II.L.K1a a. Size and location
AI.II.L.K1b b. Protected and unprotected areas
AI.II.L.K1c c. Surface wind
AI.II.L.K1d d. Direction and strength of water current
AI.II.L.K1e e. Floating and partially submerged debris
AI.II.L.K1f f. Sandbars, islands, and shoals
AI.II.L.K1g g. Vessel traffic and wakes
AI.II.L.K1h h. Direction and height of waves
AI.II.L.K1i i. Other characteristics specific to the area
AI.II.L.K2 Float and hull construction, and its effect on seaplane performance.
AI.II.L.K3 Causes of porpoising and skipping, and the pilot action needed to prevent or correct these occurrences.
AI.II.L.K4 How to locate and identify seaplane bases on charts or in directories.
AI.II.L.K5 Operating restrictions at various bases.
AI.II.L.K6 Right-of-way, steering, and sailing rules pertinent to seaplane operation.
AI.II.L.K7 Marine navigation aids, such as buoys, beacons, lights, sound signals, and range markers.
AI.II.L.K8 Naval vessel protection zones.
AI.II.L.K9 No wake zones.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.L.R1 Local conditions.
AI.II.L.R2 Impact of marine traffic.
AI.II.L.R3 Right-of-way and sailing rules pertinent to seaplane operations.
AI.II.L.R4 Limited services and assistance available at seaplane bases.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.L.S1 Explain how float and hull construction can affect seaplane performance.
AI.II.L.S2 Describe how to correct for porpoising and skipping.
AI.II.L.S3 Identify marine navigation aids.
AI.II.L.S4 Describe correct right-of-way, steering, and sailing operations.
Area of Operation II. Technical Subject Areas
AI.II.L.S5 Assess the water surface characteristics for the proposed flight.
AI.II.L.S6 Identify restrictions at local seaplane bases.
Area of Operation II. Technical Subject Areas › Task M. Night Operations
Task M. Night Operations
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands night operations, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.M.K1 Physiological aspects of vision related to night flying.
AI.II.M.K2 Lighting systems identifying airports, runways, taxiways and obstructions, as well as pilot controlled lighting.
AI.II.M.K3 Airplane equipment and lighting requirements for night operations.
AI.II.M.K4 Personal equipment essential for night flight.
AI.II.M.K5 Night orientation, navigation, chart reading techniques and methods for maintaining night vision effectiveness.
AI.II.M.K6 Use of instruments to verify the aircraft attitude at night.
AI.II.M.K7 Visual illusions at night.
AI.II.M.K8 Night taxi operations.
AI.II.M.K9 Interpretation of traffic position and direction based solely on position lights.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.M.R1 Inoperative equipment.
AI.II.M.R2 Weather considerations specific to night operations.
AI.II.M.R3 Collision hazards.
AI.II.M.R4 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.II.M.R5 Effect of visual illusions and night adaptation during all phases of night flying.
AI.II.M.R6 Runway incursion.
AI.II.M.R7 Night currency versus proficiency.
Skills: The applicant demonstrates how to:
AI.II.M.S1 Teach at least one of the elements listed in K1 through K9.
Area of Operation II. Technical Subject Areas › Task N. High Altitude Operations - Supplemental Oxygen
Task N. High Altitude Operations - Supplemental Oxygen
References: 14 CFR part 91; AC 61-107; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/ AFM
Objective: To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated
Area of Operation II. Technical Subject Areas
with flight at higher altitudes where supplemental oxygen is required or recommended, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.N.K 1 Regulatory requirements for supplemental oxygen use by flight crew and passengers.
AI.II.N.K2 Physiological factors, including:
AI.II.N.K2a a. Impairment
AI.II.N.K2b b. Symptoms of hypoxia
AI.II.N.K2c c. Time of useful consciousness (TUC)
AI.II.N.K3 Operational factors, including:
AI.II.N.K3a a. Characteristics, limitations, and applicability of continuous flow, demand, and pressure-
demand oxygen systems
AI.II.N.K3b b. Differences between and identification of “aviator’s breathing oxygen” and other types of
oxygen
AI.II.N.K3c c. Precautions when using supplemental oxygen systems
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.N.R1 High altitude flight.
AI.II.N.R2 Use of supplemental oxygen.
AI.II.N.R3 Management of compressed gas containers.
AI.II.N.R4 Combustion hazards in an oxygen-rich environment.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.N.S1 Provide an adequate briefing on use of supplemental oxygen equipment.
AI.II.N.S2 Operate or simulate operation of the installed or portable oxygen equipment in the aircraft, if installed or available.
AI.II.N.S3 Determine the quantity of supplemental oxygen required in a scenario given by the evaluator.
Area of Operation II. Technical Subject Areas › Task O. High Altitude Operations - Pressurization
Task O. High Altitude Operations - Pressurization
References: AC 61-107; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands flight in pressurized aircraft at high altitudes, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.O.K1 Fundamental concepts of aircraft pressurization system, including failure modes.
AI.II.O.K2 Physiological factors, including:
AI.II.O.K2a a. Impairment
AI.II.O.K2b b. Symptoms of hypoxia
Area of Operation II. Technical Subject Areas
AI.II.O.K2c c. Time of useful consciousness (TUC)
AI.II.O.K2d d. Effects of rapid decompression on crew and passengers
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.O.R1 High altitude flight.
AI.II.O.R2 Malfunction of pressurization system, if equipment is installed.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.O.S1 Operate the pressurization system, if equipment is installed.
AI.II.O.S2 Respond appropriately to simulated pressurization malfunctions, if equipment is installed.
Area of Operation II. Technical Subject Areas › Task P. One Engine Inoperative (OEI) Performance (AMEL, AMES)
Task P. One Engine Inoperative (OEI) Performance (AMEL, AMES)
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; FAA-P-8740-66; POH/AFM
Objective: To determine the applicant understands elements related to multiengine performance, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: Evaluator assesses the applicant's knowledge of at least two knowledge elements from this Task.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.II.P.K1 Proficient use of appropriate performance charts, tables, graphs, or other data to determine airplane performance and limitations for all phases of flight.
AI.II.P.K2 Effects of exceeding limitations.
AI.II.P.K3 Effects of atmospheric conditions on performance.
AI.II.P.K4 Factors to be considered to determine required performance is within the airplane's single and multiengine cababilities.
AI.II.P.K5 Aerodynamics of OEI operation including:
AI.II.P.K5a a. Critical engine
AI.II.P.K5b b. Effects of bank angle on VMC
AI.II.P.K5c c. Zero side slip
AI.II.P.K5d d. Reasons for loss of directional control
AI.II.P.K6 The relationship between minimum control speed (VMC) and stall speed and the effect of density altitude on that relationship.
AI.II.P.K7 How to determine the best course of action after an engine failure.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.II.P.R1 Exceeding the critical angle of attack.
AI.II.P.R2 Loss of directional control.
Area of Operation II. Technical Subject Areas
AI.II.P.R3 Flying over terrain that exceeds the single engine service ceiling.
AI.II.P.R4 Fuel management.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.II.P.S1 Compute the expected single engine climb performance.
Area of Operation III. Preflight Preparation › Task A. Pilot Qualifications
Area of Operation III. Preflight Preparation
Area of Operation III. Preflight Preparation
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Pilot Qualifications
References: 14 CFR parts 61, 68, 91; AC 60-28, AC 68-1; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands pilot training and qualification requirements for different levels of pilot certificate including student pilot, sport pilot, recreational pilot, private pilot, commercial pilot, and flight instructor; can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.III.A.K1 Certification, currency, and recordkeeping requirements, including training and logbook entries.
AI.III.A.K2 Privileges and limitations of pilot certificates and ratings at student pilot, sport, recreational, private, commercial, and flight instructor levels.
AI.III.A.K3 Medical certificates: class, expiration, privileges, temporary disqualifications, and operations under BasicMed.
AI.III.A.K4 Documents pilots must possess to exercise privileges of the specified certificate(s) and rating(s).
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.III.A.R1 Proficiency versus currency.
AI.III.A.R2 Flying unfamiliar aircraft or operating with unfamiliar flight display systems and avionics.
Skills: The applicant demonstrates how to:
AI.III.A.S1 Deliver instruction on at least two of the elements specified in K1 through K4.
Area of Operation III. Preflight Preparation › Task B. Airworthiness Requirements
Task B. Airworthiness Requirements
References: 14 CFR parts 23, 39, 43, 91; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25
Objective: To determine the applicant understands airworthiness requirements, including aircraft certificates, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.III.B.K1 General airworthiness requirements and compliance for airplanes, including:
AI.III.B.K1a a. Location and expiration dates of required aircraft certificates
AI.III.B.K1b b. Required inspections and aircraft logbook documentation
AI.III.B.K1c c. Airworthiness Directives and Special Airworthiness Information Bulletins
AI.III.B.K1d d. Purpose and procedure for obtaining a special flight permit
AI.III.B.K2 Pilot-performed preventive maintenance.
Area of Operation III. Preflight Preparation
AI.III.B.K3 Equipment requirements for day and night VFR flight, including:
AI.III.B.K3a a. Flying with inoperative equipment
AI.III.B.K3b b. Using an approved Minimum Equipment List (MEL)
AI.III.B.K3c c. Kinds of Operation Equipment List (KOEL)
AI.III.B.K3d d. Required discrepancy records or placards
AI.III.B.K4 Standard and special airworthiness certificates and their associated operational limitations.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.III.B.R1 Inoperative equipment discovered prior to flight.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.III.B.S1 Locate and describe airplane airworthiness and registration information.
AI.III.B.S2 Determine the airplane is airworthy in the scenario given by the evaluator.
AI.III.B.S3 Apply appropriate procedures for operating with inoperative equipment in a scenario given by the evaluator.
Area of Operation III. Preflight Preparation › Task C. Weather Information
Task C. Weather Information
References: 14 CFR part 91; AC 91-92; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25, FAA-H-8083-28
Objective: To determine the applicant understands weather information, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If K2 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Note: If K3 is selected, the evaluator must assess the applicant’s knowledge of at least three sub-elements.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.III.C.K1 Sources of weather data (e.g., National Weather Service, Flight Service) for flight planning purposes.
AI.III.C.K2 Acceptable weather products and resources required for preflight planning, current and forecast weather for departure, en route, and arrival phases of flight such as:
AI.III.C.K2a a. Airport Observations (METAR and SPECI) and Pilot Observations (PIREP)
AI.III.C.K2b b. Surface Analysis Chart, Ceiling and Visibility Chart (CVA)
AI.III.C.K2c c. Terminal Aerodrome Forecasts (TAF)
AI.III.C.K2d d. Graphical Forecasts for Aviation (GFA)
AI.III.C.K2e e. Wind and Temperature Aloft Forecast (FB)
AI.III.C.K2f f. Convective Outlook (AC)
AI.III.C.K2g g. Inflight Aviation Weather Advisories including Airmen's Meteorological Information (AIRMET),
Significant Meteorological Information (SIGMET), and Convective SIGMET
Area of Operation III. Preflight Preparation
AI.III.C.K3 Meteorology applicable to the departure, en route, alternate, and destination under visual flight rules (VFR) in Visual Meteorological Conditions (VMC), including expected climate and hazardous conditions such as:
AI.III.C.K3a a. Atmospheric composition and stability
AI.III.C.K3b b. Wind (e.g., windshear, mountain wave, factors affecting wind, etc.)
AI.III.C.K3c c. Temperature and heat exchange
AI.III.C.K3d d. Moisture/precipitation
AI.III.C.K3e e. Weather system formation, including air masses and fronts
AI.III.C.K3f f. Clouds
AI.III.C.K3g g. Turbulence
AI.III.C.K3h h. Thunderstorms and microbursts
AI.III.C.K3i i. Icing and freezing level information
AI.III.C.K3j j. Fog/mist
AI.III.C.K3k k. Frost
AI.III.C.K3l l. Obstructions to visibility (e.g., smoke, haze, volcanic ash, etc.)
AI.III.C.K4 Flight deck instrument displays of digital weather and aeronautical information.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.III.C.R1 Making the go/no-go and continue/divert decisions, including:
AI.III.C.R1a a. Circumstances that would make diversion prudent
AI.III.C.R1b b. Personal weather minimums
AI.III.C.R1c c. Hazardous weather conditions, including known or forecast icing or turbulence aloft
AI.III.C.R2 Use and limitations of:
AI.III.C.R2a a. Installed onboard weather equipment
AI.III.C.R2b b. Aviation weather reports and forecasts
AI.III.C.R2c c. Inflight weather resources
Skills: The applicant demonstrates and simultaneously explains how to:
AI.III.C.S1 Use available aviation weather resources to obtain an adequate weather briefing.
AI.III.C.S2 Analyze the implications of at least three of the conditions listed in K3a through K3l, using actual weather or weather conditions provided by the evaluator.
AI.III.C.S3 Correlate weather information to make a go/no-go decision.
Area of Operation IV.
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Area of Operation IV. Preflight Lesson on a Maneuver to be Performed in Flight
Note: The evaluator asks the applicant to present a preflight lesson on the selected maneuver as the lesson would be taught to a student and determines the outcome of this Task before the flight portion of the practical test. Previously developed lesson plans from the instructor applicant's library may be used.
Area of Operation IV. › Task A. Maneuver Lesson
Task A. Maneuver Lesson
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands the elements associated with a maneuver Task selected from Area of Operation VII through Area of Operation XII (ASEL, ASES) or Area of Operation VII through Area of Operation XIII (AMEL, AMES) and applies that knowledge when delivering ground instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.IV.A.K1 Purpose of the maneuver.
AI.IV.A.K2 Elements of the maneuver and the associated common errors.
AI.IV.A.K3 Desired outcome(s), including completion standards.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.IV.A.R1 The selected maneuver Task.
Skills: The applicant exhibits the skill to:
AI.IV.A.S1 Deliver instruction on the selected maneuver using a lesson plan, teaching methods, and teaching aids, as appropriate, that incorporate K1 through K3.
Area of Operation V. Preflight Procedures › Task A. Preflight Assessment
Area of Operation V. Preflight Procedures
Area of Operation V. Preflight Procedures
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Preflight Assessment
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25, FAA-H-8083-28; POH/ AFM
Objective: To determine the applicant understands preflight assessment, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.A.K1 Pilot self-assessment.
AI.V.A.K2 Determining that the airplane to be used is appropriate and airworthy.
AI.V.A.K3 Airplane preflight inspection, including:
AI.V.A.K3a a. Which items should be inspected
AI.V.A.K3b b. The reasons for checking each item
AI.V.A.K3c c. How to detect possible defects
AI.V.A.K3d d. The associated regulations
AI.V.A.K4 Environmental factors, including weather, terrain, route selection, and obstructions.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.A.R1 Pilot.
AI.V.A.R2 Aircraft.
AI.V.A.R3 Environment (e.g., weather, airports, airspace, terrain, obstacles).
AI.V.A.R4 External pressures.
AI.V.A.R5 Aviation security concerns.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.V.A.S1 Inspect the airplane with reference to an appropriate checklist.
AI.V.A.S2 Verify the airplane is in condition for safe flight and conforms to its type design.
AI.V.A.S3 Perform self-assessment.
AI.V.A.S4 Continue to assess the environment for safe flight.
Area of Operation V. Preflight Procedures › Task B. Flight Deck Management
Task B. Flight Deck Management
References: 14 CFR part 91; AC 120-71; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands flight deck management, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Area of Operation V. Preflight Procedures
Note: See Appendix 2: Safety of Flight.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.B.K1 Passenger briefing requirements, including operation and required use of safety restraint systems.
AI.V.B.K2 Use of appropriate checklists.
AI.V.B.K3 Requirements for current and appropriate navigation data.
AI.V.B.K4 Securing items and cargo.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.B.R1 Use of systems or equipment, including automation and portable electronic devices.
AI.V.B.R2 Inoperative equipment.
AI.V.B.R3 Passenger distractions.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.V.B.S1 Secure all items in the aircraft.
AI.V.B.S2 Conduct an appropriate passenger briefing, including identifying the pilot-in-command (PIC), use of safety belts, shoulder harnesses, doors, passenger conduct, sterile aircraft, propeller blade avoidance, and emergency procedures.
AI.V.B.S3 Properly program and manage the aircraft’s automation, as applicable.
AI.V.B.S4 Appropriately manage risks by utilizing ADM, including SRM/CRM.
Area of Operation V. Preflight Procedures › Task C. Engine Starting
Task C. Engine Starting
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands engine starting, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.C.K1 Starting under various conditions.
AI.V.C.K2 Starting the engine(s) by use of external power.
AI.V.C.K3 Engine limitations as they relate to starting.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.C.R1 Propeller safety.
AI.V.C.R2 Use of external power unit.
AI.V.C.R3 Limitations during starting.
Skills: The applicant demonstrates and simultaneously explains how to:
Area of Operation V. Preflight Procedures
AI.V.C.S1 Position the airplane properly considering structures, other aircraft, wind, and the safety of nearby persons and property.
AI.V.C.S2 Complete the appropriate checklist(s).
Area of Operation V. Preflight Procedures › Task D. Taxiing, Airport Signs, and Lighting (ASEL, AMEL)
Task D. Taxiing, Airport Signs, and Lighting (ASEL, AMEL)
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/ AFM
Objective: To determine the applicant understands taxiing an airplane, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.D.K1 Elements of safe taxi operations.
AI.V.D.K2 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
AI.V.D.K3 Taxi instructions/clearances.
AI.V.D.K4 Airport markings, signs, and lights.
AI.V.D.K5 Visual indicators for wind.
AI.V.D.K6 Aircraft lighting, as appropriate.
AI.V.D.K7 Procedures for:
AI.V.D.K7a a. Appropriate flight deck activities prior to taxi, including route planning and identifying the
location of Hot Spots
AI.V.D.K7b b. Radio communications at towered and nontowered airports
AI.V.D.K7c c. Entering or crossing runways
AI.V.D.K7d d. Night taxi operations
AI.V.D.K7e e. Low visibility taxi operations
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.D.R1 Activities and distractions.
AI.V.D.R2 Confirmation or expectation bias as related to taxi instructions.
AI.V.D.R3 A taxi route or departure runway change.
AI.V.D.R4 Runway incursion.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.V.D.S1 Receive and correctly read back clearances/instructions, if applicable.
AI.V.D.S2 Use an airport diagram or taxi chart during taxi, if published, and maintain situational awareness.
AI.V.D.S3 Position the flight controls for the existing wind, if applicable.
AI.V.D.S4 Complete the appropriate checklist(s).
Area of Operation V. Preflight Procedures
AI.V.D.S5 Perform a brake check immediately after the airplane begins moving.
AI.V.D.S6 Maintain positive control of the airplane during ground operations by controlling direction and speed without excessive use of brakes.
AI.V.D.S7 Comply with airport/taxiway markings, signals, and air traffic control (ATC) clearances and instructions.
AI.V.D.S8 Position the airplane properly relative to hold lines.
Area of Operation V. Preflight Procedures › Task E. Taxiing and Sailing (ASES, AMES)
Task E. Taxiing and Sailing (ASES, AMES)
References: AC 91-73; AIM; Chart Supplements; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM; USCG Navigation Rules
Objective: To determine the applicant understands taxiing and sailing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.E.K1 Procedures for various types of taxiing and sailing.
AI.V.E.K2 Current airport aeronautical references and information resources such as the Chart Supplement, airport diagram, and Notices to Air Missions (NOTAMs).
AI.V.E.K3 Taxi instructions/clearances.
AI.V.E.K4 Airport/seaplane base markings, signs, and lights.
AI.V.E.K5 Visual indicators for wind.
AI.V.E.K6 Airplane lighting.
AI.V.E.K7 Procedures for:
AI.V.E.K7a a. Appropriate flight deck activities during taxiing or sailing
AI.V.E.K7b b. Radio communications at towered and nontowered seaplane bases
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.E.R1 Activities and distractions.
AI.V.E.R2 Porpoising and skipping.
AI.V.E.R3 Low visibility taxi and sailing operations.
AI.V.E.R4 Other aircraft, vessels, and hazards.
AI.V.E.R5 Confirmation or expectation bias as related to taxi instructions.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.V.E.S1 Receive and correctly read back clearances/instructions, if applicable.
AI.V.E.S2 Use an appropriate airport diagram or taxi chart, if published.
AI.V.E.S3 Comply with seaplane base/airport/taxiway markings, signals, and signs.
AI.V.E.S4 Depart the dock/mooring buoy or beach/ramp in a safe manner, considering wind, current, traffic, and hazards.
Area of Operation V. Preflight Procedures
AI.V.E.S5 Complete the appropriate checklist(s).
AI.V.E.S6 Position the flight controls, flaps, doors, water rudders, and power correctly for the existing conditions to follow the desired course while sailing and to prevent or correct for porpoising and skipping during step taxi.
AI.V.E.S7 Exhibit procedures for steering and maneuvering while maintaining proper situational awareness and desired orientation, path, and position while taxiing using idle, plow, or step taxi technique, as appropriate.
AI.V.E.S8 Plan and follow the most favorable taxi or sailing course for current conditions.
AI.V.E.S9 Abide by right-of-way rules, maintain positive airplane control, proper speed, and separation between other aircraft, vessels, and persons.
AI.V.E.S10 Comply with applicable taxi elements in Task D if the practical test is conducted in an amphibious airplane.
Area of Operation V. Preflight Procedures › Task F. Before Takeoff Check
Task F. Before Takeoff Check
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands before takeoff checks, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.V.F.K1 Purpose of before takeoff checklist items, including:
AI.V.F.K1a a. Reasons for checking each item
AI.V.F.K1b b. Detecting malfunctions
AI.V.F.K1c c. Ensuring the aircraft is in safe operating condition as recommended by the manufacturer
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.V.F.R1 Division of attention while conducting before takeoff checks.
AI.V.F.R2 Unexpected runway changes by air traffic control (ATC).
AI.V.F.R3 Wake turbulence.
AI.V.F.R4 Potential powerplant failure during takeoff or other malfunction considering operational factors such as airplane characteristics, runway/takeoff path length, surface conditions, environmental conditions, and obstructions.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.V.F.S1 Review takeoff performance.
AI.V.F.S2 Complete the appropriate checklist(s).
AI.V.F.S3 Position the airplane appropriately considering wind direction and the presence of any aircraft, vessels, or buildings as applicable.
AI.V.F.S4 Divide attention inside and outside the flight deck.
AI.V.F.S5 Verify that engine parameters and airplane configuration are suitable.
Area of Operation VI. Airport and Seaplane Base Operations › Task A. Communications, Light Signals, and Runway Lighting Systems
Area of Operation VI. Airport and Seaplane Base Operations
Area of Operation VI. Airport and Seaplane Base Operations
Note: The evaluator must select at least one Task from this Area of Operation.
Task A. Communications, Light Signals, and Runway Lighting Systems
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands communications, ATC light signals, and runway lighting systems and can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VI.A.K1 How to obtain appropriate radio frequencies.
AI.VI.A.K2 Proper radio communication procedures and air traffic control (ATC) phraseology.
AI.VI.A.K3 ATC light signal recognition.
AI.VI.A.K4 Appropriate use of transponder(s).
AI.VI.A.K5 Lost communication procedures.
AI.VI.A.K6 Equipment issues that could cause loss of communication.
AI.VI.A.K7 Radar assistance.
AI.VI.A.K8 Runway Status Lighting Systems.
AI.VI.A.K9 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VI.A.R1 Communication.
AI.VI.A.R2 Deciding if and when to declare an emergency.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VI.A.S1 Select and activate appropriate frequencies.
AI.VI.A.S2 Transmit using standard phraseology and procedures as specified in the Aeronautical Information Manual (AIM) and Pilot/Controller Glossary.
AI.VI.A.S3 Acknowledge radio communications and comply with ATC instructions or as directed by the evaluator.
AI.VI.A.S4 Analyze and correct common errors related to this Task.
Area of Operation VI. Airport and Seaplane Base Operations › Task B. Traffic Patterns
Task B. Traffic Patterns
References: 14 CFR part 91; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25
Objective: To determine the applicant understands traffic patterns, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VI.B.K1 Towered and nontowered airport operations.
Area of Operation VI. Airport and Seaplane Base Operations
AI.VI.B.K2 Traffic pattern selection for the current conditions.
AI.VI.B.K3 Right-of-way rules.
AI.VI.B.K4 Use of automated weather and airport information.
AI.VI.B.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VI.B.R1 Collision hazards.
AI.VI.B.R2 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VI.B.R3 Windshear and wake turbulence.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VI.B.S1 Identify and interpret airport/seaplane base runways, taxiways, markings, signs, and lighting.
AI.VI.B.S2 Comply with recommended traffic pattern procedures.
AI.VI.B.S3 Correct for wind drift to maintain the proper ground track.
AI.VI.B.S4 Maintain orientation with the runway/landing area in use.
AI.VI.B.S5 Maintain traffic pattern altitude, ±100 feet, and the appropriate airspeed, ±10 knots.
AI.VI.B.S6 Maintain situational awareness and proper spacing from other aircraft in the traffic pattern.
AI.VI.B.S7 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task A. Normal Takeoff and Climb
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Note: The evaluator must select at least two takeoff and two landing Tasks from Area of Operation VII, Takeoffs, Landings, and Go-Arounds.
Task A. Normal Takeoff and Climb
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands normal takeoff and climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.A.K1 Procedures for normal and crosswind takeoff.
AI.VII.A.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.A.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.A.K4 Appropriate airplane configuration.
AI.VII.A.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.A.R1 Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.A.R2 Effects of:
AI.VII.A.R2a a. Crosswind
AI.VII.A.R2b b. Windshear
AI.VII.A.R2c c. Tailwind
AI.VII.A.R2d d. Wake turbulence
AI.VII.A.R2e e. Takeoff surface/condition
AI.VII.A.R3 Abnormal operations, including planning for:
AI.VII.A.R3a a. Rejected takeoff
AI.VII.A.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.A.R4 Collision hazards.
AI.VII.A.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.A.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VII.A.R7 Runway incursion.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.A.S1 Complete the appropriate checklist(s).
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.A.S2 Make radio calls as appropriate.
AI.VII.A.S3 Verify assigned/correct runway or takeoff path.
AI.VII.A.S4 Determine wind direction with or without visible wind direction indicators.
AI.VII.A.S5 Position the flight controls for the existing wind, if applicable.
AI.VII.A.S6 Clear the area, taxi into takeoff position, and align the airplane on the runway centerline (ASEL, AMEL) or takeoff path (ASES, AMES).
AI.VII.A.S7 Retract the water rudders, as appropriate (ASES, AMES).
AI.VII.A.S8 Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
AI.VII.A.S9 Avoid excessive water spray on the propeller(s) (ASES, AMES).
AI.VII.A.S10 Establish and maintain the most efficient planing/lift-off attitude, and correct for porpoising or skipping (ASES, AMES).
AI.VII.A.S11 Rotate and lift off at the recommended airspeed and accelerate to VY.
AI.VII.A.S12 Establish a pitch attitude to maintain the manufacturer’s recommended speed or VY, ±5 knots.
AI.VII.A.S13 Configure the airplane in accordance with manufacturer’s guidance.
AI.VII.A.S14 Maintain VY ±5 knots to a safe maneuvering altitude.
AI.VII.A.S15 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AI.VII.A.S16 Comply with noise abatement procedures, as applicable.
AI.VII.A.S17 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task B. Normal Approach and Landing
Task B. Normal Approach and Landing
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands normal approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a crosswind condition does not exist, the applicant’s knowledge of crosswind elements must be evaluated through oral testing.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.B.K1 Procedures for normal and crosswind approach and landing.
AI.VII.B.K2 A stabilized approach, including energy management concepts.
AI.VII.B.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.B.K4 Wind correction techniques on approach and landing.
AI.VII.B.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.B.R1 Selection of runway/landing surface, approach path, and touchdown area based on pilot capability, aircraft performance and limitations, available distance, and wind.
AI.VII.B.R2 Effects of:
AI.VII.B.R2a a. Crosswind
AI.VII.B.R2b b. Windshear
AI.VII.B.R2c c. Tailwind
AI.VII.B.R2d d. Wake turbulence
AI.VII.B.R2e e. Landing surface/condition
AI.VII.B.R3 Planning for:
AI.VII.B.R3a a. Rejected landing and go-around
AI.VII.B.R3b b. Land and hold short operations (LAHSO)
AI.VII.B.R4 Collision hazards.
AI.VII.B.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.B.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.B.S1 Complete the appropriate checklist(s).
AI.VII.B.S2 Make radio calls as appropriate.
AI.VII.B.S3 Ensure the airplane is aligned with the correct/assigned runway or landing surface.
AI.VII.B.S4 Scan the runway or landing surface and adjoining area for traffic and obstructions.
AI.VII.B.S5 Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
AI.VII.B.S6 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.B.S7 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady flight speed in the landing configuration (VSO), ±5 knots with gust factor applied.
AI.VII.B.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AI.VII.B.S9 Make smooth, timely, and correct control application during round out and touchdown.
AI.VII.B.S10 Touch down at a proper pitch attitude, within 200 feet beyond or on the specified point, with no side drift, and with the airplane’s longitudinal axis aligned with and over the runway center/landing path.
AI.VII.B.S11 Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
AI.VII.B.S12 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task C. Soft-Field Takeoff and Climb (ASEL)
Task C. Soft-Field Takeoff and Climb (ASEL)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands soft-field takeoff and climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.C.K1 Purpose of and procedures for soft-field takeoff and climb.
AI.VII.C.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.C.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.C.K4 Appropriate airplane configuration.
AI.VII.C.K5 Ground effect.
AI.VII.C.K6 Importance of weight transfer from wheels to wings.
AI.VII.C.K7 Left turning tendencies.
AI.VII.C.K8 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.C.R1 Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.C.R2 Effects of:
AI.VII.C.R2a a. Crosswind
AI.VII.C.R2b b. Windshear
AI.VII.C.R2c c. Tailwind
AI.VII.C.R2d d. Wake turbulence
AI.VII.C.R2e e. Runway surface/condition
AI.VII.C.R3 Abnormal operations, including planning for:
AI.VII.C.R3a a. Rejected takeoff
AI.VII.C.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.C.R4 Collision hazards.
AI.VII.C.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.C.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.C.S1 Complete the appropriate checklist(s).
AI.VII.C.S2 Make radio calls as appropriate.
AI.VII.C.S3 Verify assigned/correct runway.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.C.S4 Determine wind direction with or without visible wind direction indicators.
AI.VII.C.S5 Position the flight controls for the existing wind, if applicable.
AI.VII.C.S6 Clear the area, maintain necessary flight control inputs, taxi into takeoff position and align the airplane on the runway centerline without stopping, while advancing the throttle smoothly to takeoff power.
AI.VII.C.S7 Confirm takeoff power and proper engine and flight instrument indications.
AI.VII.C.S8 Establish and maintain a pitch attitude that transfers the weight of the airplane from the wheels to the wings as rapidly as possible.
AI.VII.C.S9 Lift off at the lowest possible airspeed and remain in ground effect while accelerating to VX or VY, as appropriate.
AI.VII.C.S10 Establish a pitch attitude for VX or VY, as appropriate, and maintain selected airspeed ±5 knots during the climb.
AI.VII.C.S11 Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
AI.VII.C.S12 Maintain VX or VY, as appropriate, ±5 knots to a safe maneuvering altitude.
AI.VII.C.S13 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AI.VII.C.S14 Comply with noise abatement procedures, as applicable.
AI.VII.C.S15 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task D. Soft-Field Approach and Landing (ASEL)
Task D. Soft-Field Approach and Landing (ASEL)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands soft-field approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.D.K1 Purpose of and procedures for soft-field approach and landing.
AI.VII.D.K2 A stabilized approach, including energy management concepts.
AI.VII.D.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.D.K4 Wind correction techniques on approach and landing.
AI.VII.D.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.D.R1 Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.D.R2 Effects of:
AI.VII.D.R2a a. Crosswind
AI.VII.D.R2b b. Windshear
AI.VII.D.R2c c. Tailwind
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.D.R2d d. Wake turbulence
AI.VII.D.R2e e. Runway surface/condition
AI.VII.D.R3 Planning for:
AI.VII.D.R3a a. Rejected landing and go-around
AI.VII.D.R3b b. Land and hold short operations (LAHSO)
AI.VII.D.R4 Collision hazards.
AI.VII.D.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.D.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.D.S1 Complete the appropriate checklist(s).
AI.VII.D.S2 Make radio calls as appropriate.
AI.VII.D.S3 Ensure the airplane is aligned with the correct/assigned runway.
AI.VII.D.S4 Scan the landing runway and adjoining area for traffic and obstructions.
AI.VII.D.S5 Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
AI.VII.D.S6 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.D.S7 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady flight speed in the landing configuration (VSO), ±5 knots with gust factor applied.
AI.VII.D.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AI.VII.D.S9 Make smooth, timely, and correct control inputs during the round out and touchdown, and, for tricycle gear airplanes, keep the nose wheel off the surface until loss of elevator effectiveness.
AI.VII.D.S10 Touch down at a proper pitch attitude with minimum sink rate, no side drift, and with the airplane’s longitudinal axis aligned with the center of the runway.
AI.VII.D.S11 Maintain elevator as recommended by manufacturer during rollout and exit the “soft” area at a speed that would preclude sinking into the surface.
AI.VII.D.S12 Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
AI.VII.D.S13 Maintain proper position of the flight controls and sufficient speed to taxi while on the soft surface.
AI.VII.D.S14 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task E. Short-Field Takeoff and Maximum Performance Climb (ASEL, AMEL)
Task E. Short-Field Takeoff and Maximum Performance Climb (ASEL, AMEL)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands short-field takeoff and maximum performance climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.E.K1 Purpose of and procedures for short-field takeoff and maximum performance climb.
AI.VII.E.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.E.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.E.K4 Appropriate airplane configuration.
AI.VII.E.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.E.R1 Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.E.R2 Effects of:
AI.VII.E.R2a a. Crosswind
AI.VII.E.R2b b. Windshear
AI.VII.E.R2c c. Tailwind
AI.VII.E.R2d d. Wake turbulence
AI.VII.E.R2e e. Landing surface/condition
AI.VII.E.R3 Abnormal operations, including planning for:
AI.VII.E.R3a a. Rejected takeoff
AI.VII.E.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.E.R4 Collision hazards.
AI.VII.E.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.E.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.E.S1 Complete the appropriate checklist(s).
AI.VII.E.S2 Make radio calls as appropriate.
AI.VII.E.S3 Verify assigned/correct runway.
AI.VII.E.S4 Determine wind direction with or without visible wind direction indicators.
AI.VII.E.S5 Position the flight controls for the existing wind, if applicable.
AI.VII.E.S6 Clear the area, taxi into takeoff position, and align the airplane on the runway centerline utilizing maximum available takeoff area.
AI.VII.E.S7 Apply brakes while setting engine power to achieve maximum performance.
AI.VII.E.S8 Confirm takeoff power prior to brake release and verify proper engine and flight instrument indications prior to rotation.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.E.S9 Rotate and lift off at the recommended airspeed and accelerate to the recommended obstacle clearance airspeed or VX, ±5 knots.
AI.VII.E.S10 Establish a pitch attitude to maintain the recommended obstacle clearance airspeed or VX, ±5 knots until the obstacle is cleared or until the airplane is 50 feet above the surface.
AI.VII.E.S11 Establish a pitch attitude for VY and accelerate to VY ±5 knots after clearing the obstacle or at 50 feet above ground level (AGL) if simulating an obstacle.
AI.VII.E.S12 Configure the airplane in accordance with the manufacturer’s guidance after a positive rate of climb has been verified.
AI.VII.E.S13 Maintain VY ±5 knots to a safe maneuvering altitude.
AI.VII.E.S14 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AI.VII.E.S15 Comply with noise abatement procedures, as applicable.
AI.VII.E.S16 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task F. Short-Field Approach and Landing (ASEL, AMEL)
Task F. Short-Field Approach and Landing (ASEL, AMEL)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands short-field approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.F.K1 Purpose of and procedures for short-field approach and landing.
AI.VII.F.K2 A stabilized approach, including energy management concepts.
AI.VII.F.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.F.K4 Wind correction techniques on approach and landing.
AI.VII.F.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.F.R1 Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.F.R2 Effects of:
AI.VII.F.R2a a. Crosswind
AI.VII.F.R2b b. Windshear
AI.VII.F.R2c c. Tailwind
AI.VII.F.R2d d. Wake turbulence
AI.VII.F.R2e e. Landing surface/condition
AI.VII.F.R3 Planning for:
AI.VII.F.R3a a. Rejected landing and go-around
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.F.R3b b. Land and hold short operations (LAHSO)
AI.VII.F.R4 Collision hazards.
AI.VII.F.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.F.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.F.S1 Complete the appropriate checklist(s).
AI.VII.F.S2 Make radio calls as appropriate.
AI.VII.F.S3 Ensure the airplane is aligned with the correct/assigned runway.
AI.VII.F.S4 Scan the landing runway and adjoining area for traffic and obstructions.
AI.VII.F.S5 Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
AI.VII.F.S6 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.F.S7 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady flight speed in the landing configuration (VSO), ±5 knots with gust factor applied.
AI.VII.F.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AI.VII.F.S9 Make smooth, timely, and correct control application before, during, and after touchdown.
AI.VII.F.S10 Touch down at a proper pitch attitude within 100 feet beyond or on the specified point, threshold markings, or runway numbers, with no side drift, minimum float, and with the airplane’s longitudinal axis aligned with and over the runway centerline.
AI.VII.F.S11 Use manufacturer’s recommended procedures for airplane configuration and braking.
AI.VII.F.S12 Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
AI.VII.F.S13 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES)
Task G. Confined Area Takeoff and Maximum Performance Climb (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands confined area takeoff and maximum performance climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.G.K1 Purpose of and procedures for confined area takeoff and maximum performance climb.
AI.VII.G.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.G.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.G.K4 Appropriate airplane configuration.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.G.K5 Effects of water surface.
AI.VII.G.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.G.R1 Selection of takeoff path based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.G.R2 Effects of:
AI.VII.G.R2a a. Crosswind
AI.VII.G.R2b b. Windshear
AI.VII.G.R2c c. Tailwind
AI.VII.G.R2d d. Wake turbulence
AI.VII.G.R2e e. Water surface/condition
AI.VII.G.R3 Abnormal operations, including planning for:
AI.VII.G.R3a a. Rejected takeoff
AI.VII.G.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.G.R4 Collision hazards.
AI.VII.G.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.G.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.G.S1 Complete the appropriate checklist(s).
AI.VII.G.S2 Make radio calls as appropriate.
AI.VII.G.S3 Verify assigned/correct takeoff path.
AI.VII.G.S4 Determine wind direction with or without visible wind direction indicators.
AI.VII.G.S5 Position the flight controls for the existing wind, if applicable.
AI.VII.G.S6 Clear the area, taxi into takeoff position utilizing maximum available takeoff area, and align the airplane on the takeoff path.
AI.VII.G.S7 Retract the water rudders, as appropriate.
AI.VII.G.S8 Establish a pitch attitude that maintains the most efficient planing/lift-off attitude and correct for porpoising and skipping.
AI.VII.G.S9 Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
AI.VII.G.S10 Avoid excessive water spray on the propeller(s).
AI.VII.G.S11 Rotate and lift off at the recommended airspeed, and accelerate to the recommended obstacle clearance airspeed or VX.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.G.S12 Establish a pitch attitude to maintain the recommended obstacle clearance airspeed or VX, ±5 knots until the obstacle is cleared or until the airplane is 50 feet above the surface.
AI.VII.G.S13 Establish a pitch attitude for VY and accelerate to VY ±5 knots after clearing the obstacle or at 50 feet above ground level (AGL) if simulating an obstacle.
AI.VII.G.S14 Retract flaps, if extended, after a positive rate of climb has been verified or in accordance with airplane manufacturer’s guidance.
AI.VII.G.S15 Maintain VY ±5 knots to a safe maneuvering altitude.
AI.VII.G.S16 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AI.VII.G.S17 Comply with noise abatement procedures, as applicable.
AI.VII.G.S18 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task H. Confined Area Approach and Landing (ASES, AMES)
Task H. Confined Area Approach and Landing (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands confined area approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.H.K1 Purpose of and procedures for confined area approach and landing.
AI.VII.H.K2 A stabilized approach, including energy management concepts.
AI.VII.H.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.H.K4 Wind correction techniques on approach and landing.
AI.VII.H.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.H.R1 Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.H.R2 Effects of:
AI.VII.H.R2a a. Crosswind
AI.VII.H.R2b b. Windshear
AI.VII.H.R2c c. Tailwind
AI.VII.H.R2d d. Wake turbulence
AI.VII.H.R2e e. Water surface/condition
AI.VII.H.R3 Planning for a go-around and rejected landing.
AI.VII.H.R4 Collision hazards.
AI.VII.H.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.H.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.H.S1 Complete the appropriate checklist(s).
AI.VII.H.S2 Make radio calls as appropriate.
AI.VII.H.S3 Ensure the airplane is aligned for an approach to the correct/assigned landing surface.
AI.VII.H.S4 Scan the landing area for traffic and obstructions.
AI.VII.H.S5 Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
AI.VII.H.S6 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.H.S7 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 VSO, +10/-5 knots with gust factor applied.
AI.VII.H.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AI.VII.H.S9 Make smooth, timely, and correct control application before, during, and after touchdown.
AI.VII.H.S10 Contact the water at the recommended airspeed with a proper pitch attitude for the surface conditions.
AI.VII.H.S11 Touch down at a proper pitch attitude, within 100 feet beyond or on the specified point, with no side drift, minimum float, and with the airplane’s longitudinal axis aligned with the projected landing path.
AI.VII.H.S12 Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result in an unsafe approach or landing.
AI.VII.H.S13 Apply elevator control as necessary to stop in the shortest distance consistent with safety.
AI.VII.H.S14 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task I. Glassy Water Takeoff and Climb (ASES, AMES)
Task I. Glassy Water Takeoff and Climb (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands glassy-water takeoff and climb, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a glassy water condition does not exist, the applicant must be evaluated by simulating the Task.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.I.K1 Purpose of and procedures for glassy water takeoff and climb.
AI.VII.I.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.I.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.I.K4 Appropriate airplane configuration.
AI.VII.I.K5 Appropriate use of glassy water takeoff and climb technique.
AI.VII.I.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.I.R1 Selection of takeoff path based on pilot capability, airplane performance and limitations, and available distance.
AI.VII.I.R2 Water surface/condition.
AI.VII.I.R3 Abnormal operations, including planning for:
AI.VII.I.R3a a. Rejected takeoff
AI.VII.I.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.I.R4 Collision hazards.
AI.VII.I.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.I.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VII.I.R7 Gear position in an amphibious airplane.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.I.S1 Complete the appropriate checklist(s).
AI.VII.I.S2 Make radio calls as appropriate.
AI.VII.I.S3 Position flight controls and configure the aircraft for the existing conditions.
AI.VII.I.S4 Clear the area, select appropriate takeoff path considering surface hazards or vessels and surface conditions.
AI.VII.I.S5 Retract the water rudders, as appropriate.
AI.VII.I.S6 Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
AI.VII.I.S7 Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
AI.VII.I.S8 Avoid excessive water spray on the propeller(s).
AI.VII.I.S9 Use appropriate techniques to lift seaplane from the water considering surface conditions.
AI.VII.I.S10 Establish proper attitude/airspeed and accelerate to VY ±5 knots during the climb.
AI.VII.I.S11 Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
AI.VII.I.S12 Maintain VY ±5 knots to a safe maneuvering altitude.
AI.VII.I.S13 Maintain directional control throughout takeoff and climb.
AI.VII.I.S14 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task J. Glassy Water Approach and Landing (ASES, AMES)
Task J. Glassy Water Approach and Landing (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands glassy-water approach and landing, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a glassy water condition does not exist, the applicant must be evaluated by simulating the Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.J.K1 Purpose of and procedures for glassy water approach and landing.
AI.VII.J.K2 A stabilized approach, including energy management concepts.
AI.VII.J.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.J.K4 When and why glassy water techniques are used.
AI.VII.J.K5 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.J.R1 Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, and available distance.
AI.VII.J.R2 Water surface/condition.
AI.VII.J.R3 Planning for a go-around and rejected landing.
AI.VII.J.R4 Collision hazards.
AI.VII.J.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.J.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VII.J.R7 Gear position in an amphibious airplane.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.J.S1 Complete the appropriate checklist(s).
AI.VII.J.S2 Make radio calls as appropriate.
AI.VII.J.S3 Scan the landing area for traffic and obstructions.
AI.VII.J.S4 Select a proper approach and landing path considering the landing surface, visual attitude references, water depth, and collision hazards.
AI.VII.J.S5 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.J.S6 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 VSO, ±5 knots.
AI.VII.J.S7 Make smooth, timely, and correct power and control adjustments to maintain proper pitch attitude and rate of descent to touchdown.
AI.VII.J.S8 Contact the water in a proper pitch attitude, and slow to idle taxi speed.
AI.VII.J.S9 Maintain directional control throughout the approach and landing.
AI.VII.J.S10 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task K. Rough Water Takeoff and Climb (ASES, AMES)
Task K. Rough Water Takeoff and Climb (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands rough water takeoff and climb, can apply that knowledge, manage
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a rough water condition does not exist, the applicant must be evaluated by simulating the Task.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.K.K1 Purpose of and procedures for a rough water takeoff and climb.
AI.VII.K.K2 Effects of atmospheric conditions, including wind, on takeoff and climb performance.
AI.VII.K.K3 Best angle of climb speed (VX) and best rate of climb speed (VY).
AI.VII.K.K4 Appropriate airplane configuration.
AI.VII.K.K5 Appropriate use of rough water takeoff and climb technique.
AI.VII.K.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.K.R1 Selection of takeoff path based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.K.R2 Effects of:
AI.VII.K.R2a a. Crosswind
AI.VII.K.R2b b. Windshear
AI.VII.K.R2c c. Tailwind
AI.VII.K.R2d d. Wake turbulence
AI.VII.K.R2e e. Water surface/condition
AI.VII.K.R3 Abnormal operations, including planning for:
AI.VII.K.R3a a. Rejected takeoff
AI.VII.K.R3b b. Potential engine failure in takeoff/climb phase of flight
AI.VII.K.R4 Collision hazards.
AI.VII.K.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.K.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VII.K.R7 Gear position in an amphibious airplane.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.K.S1 Complete the appropriate checklist(s).
AI.VII.K.S2 Make radio calls as appropriate.
AI.VII.K.S3 Verify assigned/correct takeoff path.
AI.VII.K.S4 Determine wind direction with or without visible wind direction indicators.
AI.VII.K.S5 Position flight controls and configure the airplane for the existing conditions.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.K.S6 Clear the area, select an appropriate takeoff path considering wind, swells, surface hazards, or vessels.
AI.VII.K.S7 Retract the water rudders, as appropriate.
AI.VII.K.S8 Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
AI.VII.K.S9 Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water drag.
AI.VII.K.S10 Avoid excessive water spray on the propeller(s).
AI.VII.K.S11 Lift off at minimum airspeed and accelerate to VY ±5 knots before leaving ground effect.
AI.VII.K.S12 Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
AI.VII.K.S13 Maintain VY ±5 knots to a safe maneuvering altitude.
AI.VII.K.S14 Maintain directional control and proper wind-drift correction throughout takeoff and climb.
AI.VII.K.S15 Analyze and correct common errors related to this Task.
Area of Operation VII. Takeoffs, Landings, and Go-Arounds › Task L. Rough Water Approach and Landing (ASES, AMES)
Task L. Rough Water Approach and Landing (ASES, AMES)
References: AIM; FAA-H-8083-2, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Objective: To determine the applicant understands rough water approach, can apply that knowledge, manage associated risks, demonstrate appropriate skills, and provide effective instruction.
Note: If a rough water condition does not exist, the applicant must be evaluated by simulating the Task.
Knowledge: The applicant demonstrates instructional knowledge by describing and explaining:
AI.VII.L.K1 Purpose of and procedures for rough water approach and landing.
AI.VII.L.K2 A stabilized approach, including energy management concepts.
AI.VII.L.K3 Effects of atmospheric conditions, including wind, on approach and landing performance.
AI.VII.L.K4 Wind correction techniques on approach and landing.
AI.VII.L.K5 When and why rough water techniques are used.
AI.VII.L.K6 Common errors related to this Task.
Risk Management: The applicant explains and teaches how to identify and manage risk associated with:
AI.VII.L.R1 Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, available distance, and wind.
AI.VII.L.R2 Effects of:
AI.VII.L.R2a a. Crosswind
AI.VII.L.R2b b. Windshear
AI.VII.L.R2c c. Tailwind
Area of Operation VII. Takeoffs, Landings, and Go-Arounds
AI.VII.L.R2d d. Wake turbulence
AI.VII.L.R2e e. Water surface/condition
AI.VII.L.R3 Planning for a go-around and rejected landing.
AI.VII.L.R4 Collision hazards.
AI.VII.L.R5 Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
AI.VII.L.R6 Distractions, task prioritization, loss of situational awareness, or disorientation.
AI.VII.L.R7 Gear position in an amphibious airplane.
Skills: The applicant demonstrates and simultaneously explains how to:
AI.VII.L.S1 Complete the appropriate checklist(s).
AI.VII.L.S2 Make radio calls as appropriate.
AI.VII.L.S3 Ensure the airplane is aligned with the correct/assigned waterway.
AI.VII.L.S4 Scan the landing area for traffic and obstructions.
AI.VII.L.S5 Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
AI.VII.L.S6 Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintain a stabilized approach.
AI.VII.L.S7 Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady flight speed in the landing configuration (VSO), ±5 knots with gust factor applied.
AI.VII.L.S8 Maintain directional control and appropriate crosswind correction throughout the approach and landing.
AI.VII.L.S9 Make smooth, timely, and correct power and control adjustments to maintain proper pitch attitude and rate of descent to touchdown.
AI.VII.L.S10 Contact the water in a proper pitch attitude, considering the type of rough water.
AI.VII.L.S11 Analyze and correct common errors related to this Task.
Continue reading ↓ 120 of 267 passages shown