AC 120-124 Continuous Airworthiness Maintenance Program (CAMP) Training Program
This AC explains the scope and detail the Federal Aviation Administration (FAA) expects of a Continuous Airworthiness Maintenance Program (CAMP) Training Program and offers a means (but not the only means) of compliance with Title 14 of the Code of Federal Regulations (14 CFR) part 91, § 91.1433; part 121, § 121.375; and part 135, § 135.433, the regulations requiring maintenance and preventive maintenance training programs.
U.S. Department of Transportation Federal Aviation Administration
Advisory Circular
Subject: Continuous Airworthiness
Maintenance Program (CAMP) Training Program
Date: 10/24/23 AC No: 120-124 Initiated by: AFS-300 Change:
This advisory circular (AC) provides Federal Aviation Administration (FAA)-acceptable information to use in the development of the required maintenance training program element of a Continuous Airworthiness Maintenance Program (CAMP).
The AC contains methods that operators of aircraft under Title 14 of the Code of Federal Regulations (14 CFR) parts 121, 135, and 91 subpart K (part 91K) (fractional ownership operations) that maintain their aircraft under a CAMP may use to comply with the maintenance training requirements of the regulations. Operators may elect to follow an alternate method, provided it is acceptable to the FAA. Because the means of compliance we present in this AC is not mandatory, the term “should” applies only if you choose to follow these particular methods. Operators must tailor their maintenance training program to their specific operation, personnel, management structure, and organizational needs. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.
Wesley L. Mooty Acting Deputy Executive Director, Flight Standards Service
ii
CONTENTS Paragraph Page
Chapter 1 General … 1-1
1.1 Purpose of This Advisory Circular (AC) … 1-1
1.2 Terms We Use in This AC … 1-1
1.3 Applicability … 1-1
1.4 Audience … 1-2
1.5 Where You Can Find This AC … 1-2
1.6 What is “Competent” as Used in the Regulations and This AC? … 1-2
1.7 What is the Regulatory Basis for the CAMP Training Program Element? … 1-2
1.8 Who Accepts CAMP Training? … 1-2
1.9 Who Receives CAMP Training? … 1-4
1.10 How Does Your CAMP Training Program Interface With Your Safety Management System? … 1-6
1.11 Is My Non-Extended Operations (ETOPS) CAMP Training Program Sufficient for ETOPS? … 1-7
1.12 What Determines the Complexity and Scope of a CAMP Training Program? … 1-7
1.13 Which Regulations and Other Guidance Material are Related to This AC? … 1-8
Chapter 2 Types of Training … 2-1
2.1 Purpose of This Chapter … 2-1
2.2 CAMP Indoctrination … 2-1
2.3 Code of Federal Regulations (CFR) … 2-2
2.4 Maintenance Policies and Procedures Content and Usage … 2-2
2.5 Human Factors Training (Initial and Recurrent) … 2-2
2.6 Initial Training … 2-4
2.7 On-the-Job Training (OJT) … 2-5
2.8 Recurrent Training … 2-5
2.9 Requalification Training … 2-6
2.10 Remedial Training … 2-7
2.11 Aircraft/Airplane Equipment Specific Training … 2-7
2.12 Specialized Tasks … 2-8
iii
2.13 Competency-Based Training … 2-9
2.14 Maintenance Provider Training … 2-9
Chapter 3 Training Program Basic Components … 3-1
3.1 General Components … 3-1
3.2 Job Analysis … 3-1
3.3 Competency Standards … 3-1
3.4 Training Needs Assessment … 3-2
Table 3-1. Employee Evaluation Methods … 3-5
3.5 Course Development … 3-9
3.6 Training Completion Documentation … 3-17
3.7 Training Program Review and Evaluation … 3-18
Chapter 4 Maintenance Training Course Subjects … 4-1
4.1 Regulatory Maintenance Training Course Subjects … 4-1
4.2 Maintenance Human Factors Training … 4-4
4.3 Safety and Risk Management Subjects … 4-6
4.4 Maintenance-Specific Courses … 4-7
Chapter 5 Contract Maintenance Training … 5-1
5.1 Contract Maintenance Oversite … 5-1
5.2 Basic Training Program Requirements … 5-3
5.3 Subject Areas … 5-5
Chapter 6 Administrative Information … 6-1
6.1 Copies of This AC and Other FAA Publications … 6-1
6.2 Further Information on This AC … 6-1
6.3 AC Feedback Form … 6-1
Appendix A. Sample Training Program … A-1
iv
List of Figures
Figure 3-1. Sample Training Needs Assessment Documentation by Job Description
and Task … 3-7
Figure 3-2. Sample Training Needs Assessment Documentation by Type of Work … 3-7
Figure 3-3. Sample Training Needs Assessment Documentation by Job Description … 3-8
Figure 3-4. Sample Training Needs Assessment Documentation by Job Description
and Timeframe … 3-8
Figure 3-5. Sample 1 of Course Requirements Documentation … 3-16
Figure 3-6. Sample 2 of Course Requirements Documentation … 3-17
CHAPTER 1 GENERAL › 1.3 Applicability.
CHAPTER 1 GENERAL
1.1 Purpose of This Advisory Circular (AC). This AC explains the scope and detail the Federal Aviation Administration (FAA) expects of a Continuous Airworthiness Maintenance Program (CAMP) Training Program and offers a means (but not the only means) of compliance with Title 14 of the Code of Federal Regulations (14 CFR) part 91, § 91.1433; part 121, § 121.375; and part 135, § 135.433, the regulations requiring maintenance and preventive maintenance training programs.
1.2 Terms We Use in This AC.
1.2.1 When we use “must” or “will” in this AC, we are referencing actual regulatory requirements.
1.2.2 When we use “we,” “us,” or “our” in this AC, we mean the FAA. When we use “you,” “your,” or “yours,” we mean you, the air carrier certificate holder (CH), or the part 91 subpart K (part 91K) program manager.
1.2.3 We use the term “person” as defined in 14 CFR part 1, § 1.1, meaning an individual, firm, partnership, corporation, company, association, joint-stock association, or governmental entity. It includes a trustee, receiver, assignee, or similar representative of any of them.
1.2.4 When we use the acronym “CAMP,” we are referring to an “Aircraft Maintenance – Continuous Airworthiness Maintenance Program (CAMP) Authorization” the FAA issues to you via operations specification (OpSpec) D072 if you are a part 121 or 135 air carrier, or via management specification (MSpec) D072 if you are a part 91K fractional ownership operations program manager. A table within each D072 specification identifies a document or set of documents that describe comprehensively, and in detail, your maintenance program design. The table associates your document(s) (i.e., your maintenance program) with the specific make/model/series (M/M/S) aircraft you intend to maintain by following it. FAA authorization of a CAMP includes acceptance that the CAMP Training Program is compliant with §§ 91.1433, 121.375, and 135.433.
Note: Incorporation by reference: instead of repeating information contained in another document, a CAMP operator may incorporate information from a document or part thereof, by referring and/or providing links to it in the text of its CAMP manual.
1.2.5 The regulations related to CAMP authorizations and use are essentially the same for parts 91K, 121, and 135 operations. Therefore, phrases such as “CAMP operators,” “CAMP operations,” “CAMP organization,” and “CAMP Training Program” address parts 91K, 121, and 135 operations that maintain aircraft subject to a CAMP.
1.3 Applicability. A CAMP authorization is a requirement for all CHs operating under part 121. A CAMP authorization is also the preferred means of meeting the continuing maintenance requirements of § 135.425 for part 135 aircraft that are type certificated for a passenger-seating configuration, excluding any pilot seat, of 10 seats or more. It is an
CHAPTER 1 GENERAL › 1.8 Who Accepts CAMP Training?
option for part 135 CHs who are not otherwise required to maintain their aircraft under a CAMP, as well as an option for part 91K fractional ownership operations.
1.4 Audience. This AC applies to persons who obtain MSpec or OpSpec D072. To receive this authorization, you must have a CAMP Training Program that is acceptable to the FAA.
1.5 Where You Can Find This AC. You can find this AC on the FAA’s website at https://www.faa.gov/regulations_policies/advisory_circulars and the Dynamic Regulatory System (DRS) at https://drs.faa.gov.
1.6 What is “Competent” as Used in the Regulations and This AC? Competent, as used in §§ 91.1425, 91.1433, 121.367, 121.375, 135.425, and 135.433, means a measurable pattern of knowledge, skills, and abilities; as well as past behavioral experience and expertise that is relevant to an individual’s specific duty, task, or job assignment. The specific competency may be substantiated by a certificate, authorization, training record, résumé, or some other form of documentation.
1.6.1 General and Technical Competencies. Competencies tend to be either general or technical. General competencies reflect the cognitive and social capabilities (e.g., problem solving, interpersonal skills) required for job performance in a variety of occupations. On the other hand, technical competencies are specific and require you to tailor them to the particular knowledge and skill requirements necessary for a specific job.
1.6.2 A Competent Person. A competent person knows how to determine the adequacy of the work they do and, if required, the work others do in accordance with your procedures. A competent person has a full understanding of their assigned duties and authority and fully understands their part in your overarching responsibility to ensure airworthiness.
1.7 What is the Regulatory Basis for the CAMP Training Program Element? Sections 91.1433, 121.375, and 135.433 provide the direct requirements for you to have a maintenance training program. In addition, you are required to ensure the provision of competent personnel to perform maintenance, preventive maintenance, and alterations (§§ 91.1427, 121.369, and 135.427). Title 14 CFR part 119, §§ 119.65 and 119.69 require specific training requirements for parts 121 and 135 CHs’ management and technical personnel and anyone in a position to exercise control over operations.
1.8 Who Accepts CAMP Training? The FAA must accept your training program’s documented design and validate its performance before issuing a D072 authorization. You should assess, accept, and authorize contractor maintenance training when you choose to use them. The FAA expects your documented training program design will cover the access, use, and content of your CAMP manual; your assessment methods that ensure a person is fully informed and competent; training recordkeeping; acceptance of contract maintenance programs when you choose to use them; and a solid interface with your Continuing Analysis and Surveillance System (CASS).
1.8 Who Accepts CAMP Training? › 1.8.4 Contract Provider Training Programs.
1.8.1 Basic Content of the Maintenance Manual. The emphasis and significance of your manual cannot be overstated. Your CAMP is unique to you, and therefore §§ 91.1023, 121.133, and 135.21, in conjunction with §§ 91.1437, 121.369, and 135.427, require you to produce a manual that reflects your design. Your manual provides personnel with your direction, procedures, instructions, guidance, and information that you require them to follow in order for you to meet your primary responsibility requirements and maintain safe operations. Therefore, an acceptable CAMP Training Program must derive its basic content and curriculum from your CAMP manual and will address the unique nature and requirements your CAMP requires. The FAA should be able to identify some form of introductory training that ensures each person knows how to access the CAMP manual part(s) that is relevant to them. The CAMP Maintenance and Preventive Maintenance Training Program must inform, teach, reinforce, and emphasize the methods, techniques, and practices of your CAMP manual.
1.8.2 Method to Ensure a Person is Fully Informed and Competent. A CAMP Training Program is your means to present, explain, and ensure maintenance personnel understand the methods, techniques, and practices defined in your manual. Your CAMP Training Program is your means to emphasize to those you employ, contract with, and authorize to perform maintenance (including inspection), preventive maintenance, and alterations that they must do so in accordance with your manual. Your CAMP Training Program is where you determine personnel are fully informed and competent based on your standards and expectations. The method you use to meet the requirements of §§ 91.1425, 121.367, and 135.425 to provide competent personnel must be documented in your CAMP manual per §§ 91.1427, 121.369, and 135.427.
1.8.3 Training Recordkeeping. The FAA expects your CAMP Training Program to gather, produce, and maintain training records of your employees and include a method that explains how you oversee and verify contractor employee records. Training records validate that personnel have a full understanding and are competent. These records should show that you or your contract provider have considered past and present training, experience, and certifications; compared them to the competency standards you have set in your manual; and provided additional training as required to fill any identified knowledge or competency gaps.
1.8.4 Contract Provider Training Programs. You should assess, accept, and authorize contractor maintenance training when you choose to use them. The regulations accommodate the significant safety benefits afforded by contract maintenance providers, especially in highly technical and specialized areas of maintenance; however, doing so induces risks that the CAMP operator needs to control and explain within its CAMP manual. The CAMP operator has overarching responsibility for training regardless of whose program it is or who is delivering it. Sections 91.1427, 121.368, 121.369(b)(10), 135.426, and 135.427(b)(10) require your manual to include your methods to evaluate maintenance provider training, supplement it as is necessary, accept its content and delivery methods, authorize its use through a maintenance provider agreement or method your manual describes, and continuously verify training performance and effectiveness.
1.9 Who Receives CAMP Training? › 1.9.1 Your CAMP Organizational Management.
1.8.5 CASS Interface. Sections 91.1431, 121.373, and 135.431 require CHs to establish and maintain a system for the continuing analysis and surveillance of the performance and effectiveness of its inspection program and the program covering other maintenance, preventive maintenance, and alterations. This includes the correction of any deficiency in those programs, regardless of whether those programs are carried out by the CH or by another person. Therefore, regardless of whether your CAMP Training Program is of your design or a contract maintenance provider training program you accept as part of your design, your CASS must be able to influence your training when it identifies or associates root cause deficiencies with your training program design or delivery of your maintenance training. You are responsible for ensuring that maintenance, preventive maintenance, and alterations performed by your maintenance employees, or by other persons for you, is performed in accordance with your manual.
1.9 Who Receives CAMP Training? The CAMP Training Program applies to your entire maintenance organization. Sections 91.1423, 121.365, and 135.423 require an organization to adequately perform maintenance, preventive maintenance, alterations, and required inspections. Sections 91.1427, 121.369, and 135.427 require you to place in your manual a chart or description of your organization and a list of the persons you have arranged with to perform any of your required inspections, other maintenance, preventive maintenance, or alterations. The performance of maintenance (including inspection), preventive maintenance, and alterations, followed by the article’s subsequent return to service, is an organizational responsibility with individual duties that are often divided and diverse. Each person performing functions such as manual management, maintenance control, records control, maintenance scheduling, assuring serviceability of parts, and maintaining your CASS has a role in determining the “adequacy of work.” As such, your CAMP Training Program, per §§ 91.1433, 121.375, and 135.433, should ensure each individual (within their respective organizational roles) is fully informed about procedures, techniques, and new equipment in use, and is competent to perform their duties as they relate to determining the adequacy of the work done under your CAMP authority.
1.9.1 Your CAMP Organizational Management. The management-related provisions for part 91K for fractional ownership operations, and those in §§ 119.65 and 119.69 for parts 121 and 135 air carriers, require sufficient management and technical personnel who are qualified through training, experience, and expertise. AC 120-16, Air Carrier Maintenance Programs, explains these positions are necessary to perform, supervise, manage, and amend your CAMP; manage and guide your maintenance personnel; and provide the direction necessary to achieve your CAMP objectives defined in §§ 91.1425, 121.367, and 135.425. The duties, responsibilities, and authority of personnel that fill these required or approved positions must be as stated in the general policy provisions of the manual required by §§ 91.1023, 121.133, and 135.21. While you may hire individuals with the training, experience, and expertise you require, your CAMP Training Program should ensure the personnel you provide have a full understanding of their duties, authority, and responsibility. The CAMP Training Program empowers you to train and prepare your employees for management roles and responsibilities within your organization. To the extent of their responsibilities (per §§ 119.65 and 119.69), these individuals should fully understand:
1.9 Who Receives CAMP Training? › 1.9.4 Contract Maintenance Personnel.
• Aviation safety standards and safe operating practices;
• Title 14 CFR Chapter I (Federal aviation regulations);
• Your OpSpecs;
• All appropriate maintenance and airworthiness requirements (e.g., 14 CFR parts 1, 21, 23, 25, 43, 45, 47, 65, 91, and 121); and
• Your manual required by §§ 91.1023, 121.133, and 135.21.
1.9.2 Those Who Perform Maintenance, Preventive Maintenance, and Alterations and Those Who Approve Work for Return to Service.
1.9.2.1 The training program must ensure that CAMP operator personnel, or the persons with whom the CAMP operator has arranged to perform the work, understand the policies, procedures, and instructions in their maintenance manual; are fully informed about procedures, techniques, and new equipment in use; and are competent to perform their duties. Sections 121.379 and 135.437 grant parts 121 and 135 CHs the authority to perform maintenance, preventive maintenance, and alterations as provided in their maintenance manuals. In addition, they authorize those CHs to approve for return to service any airframe, aircraft engine, propeller, rotor (rotorcraft may be used in part 135, but not part 121), or appliance after performing that maintenance, preventive maintenance, or alteration. As part of the approval for return to service, §§ 121.709 and 135.443 restrict airworthiness releases, logbook entries, and approvals for return to service to only appropriately certificated persons.
1.9.2.2 Unlike air carriers, part 91K operators are not maintenance entities. The performance of maintenance, preventive maintenance, and alterations, and the subsequent approval for return to service, must be by a certificated person authorized to do so under part 43. A part 91K program manager may perform and/or approve maintenance for return to service only if properly certificated. However, the part 91K program manager still has the responsibility, with the Director of Maintenance (DOM), to ensure the personnel they employ or contract with are appropriately certificated, have a full understanding of the CAMP manual procedures and techniques, are fully informed of any new equipment in use, and are competent in accordance with their manual.
1.9.3 Required Inspection Personnel. Sections 91.1429, 121.371, and 135.429 provide that persons who perform required inspections for you must be appropriately certificated, properly trained, qualified, and authorized to do so, and must perform under the supervision and control of an inspection unit.
1.9.4 Contract Maintenance Personnel. It is common for persons performing maintenance, preventive maintenance, or alteration functions for you to have a training program of their own. When you arrange with others to perform work for you, your responsibility is to ensure these individuals are fully informed about your procedures, techniques, and new
1.10 How Does Your CAMP Training Program Interface With Your Safety… › 1.10.2 Your CAMP Training Program is a Means to Gather Safety Data.
equipment in use, and are competent to perform their duties in accordance with your manual.
1.9.5 Individuals Who Perform CASS Functions. Individuals who perform CASS functions must be able to validate your CAMP’s performance and assess its effectiveness. These individuals collectively determine the adequacy of all CAMP work; therefore, the CAMP Training Program is a method to ensure they are competent to do so.
1.9.6 Maintenance Department Employees. Parts clerks, records clerks, and auditors may not need training under your CAMP Training Program; however, parts and records control, as well as complete and accurate audits, are essential to ensure airworthiness. Competent performance of these duties is expected, necessary, and may be required. Refer to §§ 91.1433, 121.375, and 135.433.
1.10 How Does Your CAMP Training Program Interface With Your Safety Management System? The Airline Safety and Federal Aviation Administration Extension Act of 2010 directed the FAA to “require all part 121 air carriers to implement a safety management system. As a result, in 2015, the FAA published 14 CFR part 5, Safety Management Systems, applicable to air carriers conducting operations under part 121. Persons other than part 121 air carriers are encouraged to implement a Safety Management System (SMS) voluntarily. AC 120-92, Safety Management Systems for Aviation Service Providers, provides an acceptable means of complying with part 5. SMS is not a standalone program; rather it is a system that emphasizes safety and is integrated throughout all aviation-related facets of an organization. An SMS does not have to be extensive, expensive, or sophisticated to do what it is supposed to do. Part 121 air carriers and others with an FAA-accepted SMS should understand that developing and delivering any training (including maintenance training) is an opportunity to promote safety.
Because the performance and approval of maintenance is relative to your safety performance, your maintenance executives, managers, and other employees are all accountable for your safety performance (refer to § 5.23). Note that the requirements in § 5.91 (competencies and training) and § 5.93 (safety communication) apply for part 121 operators and should be considered in developing your CAMP Training Program. Note also that § 5.97(c) (SMS records) requires you to maintain a record of all training provided under § 5.91 for each individual, and that those records must be retained for as long as the individual is employed by the operator. Additionally, § 5.97(d) requires part 121 operators to retain records of all communications provided under § 5.93 for a minimum of 24 consecutive calendar months.
1.10.1 Your CAMP Training Program May be a Mitigation Strategy. You may use a CAMP Training Program as a mitigation strategy to address the hazard/risk of a “nonproficient” employee or work unit.
1.10.2 Your CAMP Training Program is a Means to Gather Safety Data. Existing programs, such as an Aviation Safety Action Program (ASAP), the CAMP Training Program, and the CASS, provide valuable data that you can integrate into an SMS. Feedback from these programs will “feed” your system, which may often identify underlying causes and identify additional hazards or increased risk.
1.12 What Determines the Complexity and Scope of a CAMP Training Program? › 1.12.1 Persons tasked with reliability program or CASS data collection…
1.11 Is My Non-Extended Operations (ETOPS) CAMP Training Program Sufficient for ETOPS? No. A CH conducting ETOPS with two-engine airplanes must enhance its CAMP Training Program to comply with the ETOPS maintenance requirements as specified in §§ 121.374 and 135.411(d). An ETOPS CAMP has additional training requirements and expectations. In accordance with § 121.374(m) and part 135 appendix G, subparagraph G135.2.8(m), for each airplane-engine combination, you must develop a maintenance training program that provides training adequate to support ETOPS. This may be a standalone program or an enhancement to your existing non-ETOPS CAMP Training Program. Either way you must ensure ETOPS-specific training for all persons involved in ETOPS maintenance, and this training must focus on the special nature of ETOPS. This training is in addition to your CAMP Training Program used to qualify individuals to perform work on specific airplanes and engines.
1.12 What Determines the Complexity and Scope of a CAMP Training Program? Your CAMP Training Program is unique to your organization. The complexity of your CAMP Training Program is proportional to the maintenance organization, the number of aircraft, aircraft make, aircraft model, and aircraft equipment configurations. The number of courses, content, time requirements, training methods, and sources within a CAMP will vary accordingly. For example, one maintenance organization may have separate indoctrination courses for technicians, inspectors, managers, and supervisors. Another maintenance organization may have only one indoctrination course appropriate for all of its employees, including temporary personnel. The FAA expects the CAMP Training Program, like the CAMP itself, to be sufficiently comprehensive in scope and detail to fulfill its responsibility to provide competent personnel and authorize inspection personnel to maintain the aircraft in an airworthy condition in accordance with the regulations. Competent individuals who perform the inspections and other maintenance, preventive maintenance, and alterations under the CAMP:
1. Understand and use the applicable portions of the CH’s/program manager’s manual to perform their assigned tasks;
2. Perform the work;
3. Determine the adequacy of the work;
4. Determine the adequacy of the work done under their supervision;
5. Accomplish the approval for return to service under §§ 91.1443, 121.709, and 135.443, as applicable, on behalf of the maintenance organization;
6. Identify Required Inspection Items (RII) and ensure they are verified and that the required items are correct; and
7. Create complete and accurate maintenance record entries.
1.12.1 Persons tasked with reliability program or CASS data collection and analysis duties may require specialized training and technical backgrounds. It is your responsibility to ensure those who perform these duties are competent to do so. In general, these auditors and analysts should:
1.13 Which Regulations and Other Guidance Material are Related to This AC? › 1.13.2 Advisory Circulars (AC).
1. Have a sufficient maintenance background applicable to your program.
2. Be familiar with your maintenance procedures, technical documents, and aircraft systems.
3. Be able to understand and interpret data to evaluate the facilities, equipment, and processes you use.
4. Have training and experience specific to their assigned functions and duties.
5. Have systems analytical skills.
6. Have skills in auditing techniques.
7. Be able to apply risk assessment and risk management (RM) techniques.
8. Be able to perform Root Cause Analysis (RCA).
9. Fully understand and consider human factors.
1.13 Which Regulations and Other Guidance Material are Related to This AC? For more information, consult the current editions of the following documents:
1.13.1 Title 14 CFRs.
1. Part 1, Definitions and Abbreviations. Part 1 contains the definitions of some of the words used in 14 CFR.
2. Part 5, Safety Management Systems: Subpart E—Safety Promotion.
3. Part 43, Maintenance, Preventive Maintenance, Rebuilding, and Alteration. Part 43 contains the rules for maintenance, preventive maintenance, rebuilding, and alteration.
4. Part 91, General Operating and Flight Rules: Subpart K—Fractional Ownership Operations.
5. Part 119, Certification: Air Carriers And Commercial Operators: Subpart C— Certification, Operations Specifications, and Certain Other Requirements for Operations Conducted Under Part 121 or Part 135 of This Chapter.
6. Part 121, Operating Requirements: Domestic, Flag, and Supplemental Operations: Subpart L—Maintenance, Preventive Maintenance, and Alterations.
7. Part 135, Operating Requirements: Commuter and On-Demand Operations and Rules Governing Persons On Board Such Aircraft: Subpart J—Maintenance, Preventive Maintenance, and Alterations.
1.13.2 Advisory Circulars (AC).
1. AC 120-16, Air Carrier Maintenance Programs. This AC describes a Continuous Airworthiness Maintenance Program (CAMP). It explains the background as well as the FAA’s regulatory requirements for these programs.
2. AC 120-66, Aviation Safety Action Program. This AC provides information encouraging employees to voluntarily report safety information.
3. AC 120-72, Maintenance Human Factors Training. This AC presents guidelines for developing, implementing, reinforcing, and assessing Maintenance Human Factors (MxHF) training programs for improving communication, effectiveness, and safety in maintenance operations.
1.13 Which Regulations and Other Guidance Material are Related to This AC? › 1.13.3 Other Publications.
4. AC 120-78, Electronic Signatures, Electronic Recordkeeping, and Electronic Manuals. This AC provides information on electronic recordkeeping.
5. AC 120-79, Developing and Implementing an Air Carrier Continuing Analysis and Surveillance System. This AC provides information on how to implement a CASS, which is required for CAMP operators.
6. AC 120-92, Safety Management Systems for Aviation Service Providers. This AC provides information on how to develop an SMS.
1.13.3 Other Publications.
1. FAA Order 8900.1, Volume 3, Chapter 24, Evaluate 14 CFR Parts 91 Subpart K/121/135.411(a)(2) Maintenance Training Program Record. Section 1 provides guidance for training program evaluation and Section 2 provides guidance for evaluating and accepting a human factors training program.
2. The FAA Office of Aerospace Medicine (AAM) Operator’s Manual: Human Factors in Aviation Maintenance. This manual is available at https://www.faa.gov/data_researc h/research/med_humanfacs/oamtechreports/2010s/2015/201502. As stated on FAA.gov, “This manual recognizes that readers already know the importance of human factors – a science that pays attention to physical, psychological, and other human attributes to ensure that we work safely and efficiently with minimal risk to others and equipment. The chapters discuss seven critical human factors topics that contribute to the goal of creating and reinforcing a safety culture where employees practice safe habits, both at work and at home:
1. Hazard Identification,
2. Procedural Compliance and Documentation,
3. Human Factors Training – Evolution and Reinforcement,
4. Fatigue Risk Management,
5. Human Factors Health and Safety Program,
6. Considering Human Factors Issues in Design and Installation, and
7. Measuring Impact and Return on Investment.”
Note: A downloadable PDF is available at https://www.faa.gov/sites/faa.gov/files/ data_research/research/med_humanfacs/oamtechreports/201502.pdf.
3. Air Transport Association (ATA) Specification 104, Guidelines for Aircraft Maintenance Training, Washington, DC, Airlines for America (2017). The document provides guidance on training development including task analysis and
industry-defined training levels. This document is available at https://publications.airlines.org/CommerceProductDetail.aspx?Product=236.
4. International Civil Aviation Organization (ICAO) Doc 9683-AN/950, Human Factors Training Manual (1998). This document provides overview information on training content for human factors programs.
5. European Union Aviation Safety Agency (EASA) Acceptable Means of Compliance (AMC) and Guidance Material (GM). This information may have value for those interested in the training design and maintenance certification guidance used by EASA. The information is available at https://www.easa.europa.eu/documentlibrary/acceptable-means-of-compliance-and-guidance-materials.
2.2 CAMP Indoctrination. › 2.2.2 Indoctrination training usually covers the following subject areas
CHAPTER 2 TYPES OF TRAINING
2.1 Purpose of This Chapter.
2.1.1 The AC explains various types of training that you should consider in the following sections:
2.2 CAMP Indoctrination.
2.3 Code of Federal Regulations (CFR).
2.4 Maintenance Policies and Procedures Content and Usage.
2.5 Human Factors Training (Initial and Recurrent).
2.6 Initial Training.
2.7 On-the-Job Training (OJT).
2.8 Recurrent Training.
2.9 Requalification Training.
2.10 Remedial Training.
2.11 Aircraft/Airplane Equipment Specific Training.
2.12 Specialized Tasks.
2.13 Competency-Based Training.
2.14 Maintenance Provider Training.
2.1.2 Your CAMP Training Program should be flexible enough to adjust as needs arise and include additional types of training as dictated by maintenance program assessments, changes in operations, and regulatory requirement changes.
2.2 CAMP Indoctrination.
2.2.1 Indoctrination training should introduce new employees to the organization and its operations and serve as core training for all employees. Indoctrination training usually is required only for new employees shortly after an employee is hired. The scope and depth of indoctrination training will vary based on the employee’s job function and the complexity of the organization. However, to establish a common company core of knowledge, indoctrination training should be similar for all employees.
2.2.2 Indoctrination training usually covers the following subject areas:
• The operator’s basic policies and procedures, company manuals, and organizational and administrative practices.
• Applicable sections of 14 CFR.
• Facility security.
2.5 Human Factors Training (Initial and Recurrent). › 2.5.1 FAA investigations and data analysis show that human factors have…
• Maintenance department and quality control policies, procedures, and practices; maintenance manuals; and forms.
• Company and maintenance department computer systems and software training.
• Maintenance recordkeeping and documentation.
• Human factors and safety management procedures overview.
• Hazardous materials (HAZMAT), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) regulations familiarization.
2.2.3 The maintenance training portion of the manual should contain the training program subject areas, define to whom and when indoctrination training is required, and define the timeframe for delivery (e.g., within 30 days of hiring).
2.3 Code of Federal Regulations (CFR).
2.3.1 All employees should receive a basic introduction to the 14 CFR and the applicable sections as described in the indoctrination training.
2.3.2 Many employees require a more detailed review of the applicable regulations as they apply directly to their specific job responsibilities. For example, inspectors and those with approval for return-to-service signature authority may require additional or an indepth review of the regulations as applied to their job responsibility.
2.3.3 A CAMP Training Program task analysis should determine and justify the amount of regulations training required beyond indoctrination training.
2.4 Maintenance Policies and Procedures Content and Usage.
2.4.1 Improper use of or failure to use documentation to follow established procedures is a leading contributing factor to human error in maintenance. Therefore, training for maintenance policies and procedures is important to all employees.
2.4.2 Training should ensure that it addresses the Continuing Analysis and Surveillance System (CASS) analysis and assessments, disclosure reporting, and regulatory noncompliance related to documentation and manual use.
2.4.3 Training for use of procedures should be matched to each employee’s job requirements. This training should also be reinforced in the human factors training.
2.5 Human Factors Training (Initial and Recurrent).
2.5.1 FAA investigations and data analysis show that human factors have contributed to approximately 80 percent of all maintenance-related accidents and incidents. Research and experience show human factors training can address many issues that contribute to these maintenance events. Attention to maintenance human factors will raise efficiency, effectiveness, and safety in aviation environments. That translates to better expense control and long-term safety benefits.
2.5 Human Factors Training (Initial and Recurrent). › 2.5.7 Maintenance human factors experts and other regulatory agencies,…
2.5.2 Training in maintenance human factors is an essential part of a maintenance training program. The CAMP Training Program, and any revision to it, should include human factors elements.
2.5.3 Many companies have European Union Aviation Safety Agency (EASA) certificates and have implemented training accordingly. This AC encourages CAMP Training Programs to conform to EASA’s suggestions for training content. However, the maintenance organization can base its human factors training on a training needs assessment that may not include all the EASA elements.
2.5.4 Human factors training can be delivered using multimedia, including web-based training. However, the value of additional instructor-led discussion is extremely valuable.
2.5.5 When human factors training is provided by contracted providers, the manual should state the way the contracted program is evaluated and authorized to deliver this training.
2.5.6 The maintenance training portion of the manual should contain human factor subject areas, define how outside influences affect human behavior, provide human factor awareness training, and contain a student assessment evaluation concerning content and instructional delivery.
2.5.7 Maintenance human factors experts and other regulatory agencies, including EASA, have identified the following key topics to include in a training program.
1. General/introduction to human factors.
2. Safety culture/organizational factors.
3. Error (error principles, event investigation, and case studies).
4. Human performance and limitations.
5. Environment (physical and social).
6. Procedures, information, tools, and task signoff practices.
7. Planning of tasks, equipment, and spares.
8. Communication.
9. Teamwork and leadership.
10. Professionalism and integrity.
11. Shift and task turnover.
12. Undocumented maintenance.
13. Fatigue management/fitness for duty.
14. The Dirty Dozen. (The Dirty Dozen refers to twelve of the most common human error preconditions, or conditions that can act as precursors, to accidents or incidents. Refer to AC 120-72, Maintenance Human Factors Training.)
2.6 Initial Training.
2.6.1 Initial training is where you establish the minimum competency levels individuals must meet when performing their work assignments. It is here that you ensure personnel are fully informed about your procedures, techniques, and equipment. Individuals leave initial training knowing their duties and authorities and they are now fully aware of what you expect of them. Initial training enables individuals (at the level they are assigned) to determine the adequacy of the work they do (and if required) the work others do in accordance with your procedures. Through initial training, each individual understands their part in your overarching responsibility to ensure airworthiness.
2.6 Initial Training. › 2.6.4 Initial training could have minimum hour requirements; however,…
2.6.2 Initial training may be tailored according to job functions and position. For example, initial training for maintenance technicians would be different than that for stockroom clerks. Initial training should be matched to the aircraft type(s) on which the employee is likely to work. Regardless of their work assignments, initial training is where you relate your methods, techniques, and practices defined in your manual as it applies to their duties and responsibilities.
2.6.3 Initial training based on CAMP competencies ensures each employee has a validated set of knowledge, skills, aptitude, and ability, and is not measured in course hours or time. Initial training is your opportunity to evaluate each person’s skill level and assess how their skills meet your CAMP needs and expectations. This determination is based on each employee’s previous experience and demonstrated capabilities. It is best established through a needs assessment process (see paragraph 3.4). This needs assessment is a critical part of establishing each individual’s training requirements. There could be different standards and program requirements depending on the measured skills and past experience of each maintenance employee. The following are some standards you could apply:
• Individuals with no prior experience,
• Individuals with prior experience on the same aircraft type,
• Individuals with prior experience not on the same aircraft type,
• Individuals with experience working under a CAMP organization,
• Individuals without experience working under a CAMP organization,
• Individuals with prior repair station experience, and/or
• Individuals with prior military experience.
2.6.4 Initial training could have minimum hour requirements; however, achieving individual competency must be the output of your CAMP Training Program. The CAMP Training Program portion of your manual will identify the minimum competency standards each employee must possess prior to being used in your maintenance organization. For example, the minimum initial training requirements for all maintenance technicians may be 40 hours, but maintenance technicians with no prior experience may require 80 hours or more in order to reach the competency level expected of them.
2.8 Recurrent Training. › 2.8.1 Recurrent maintenance training, also known as refresher training,…
2.6.5 While not all-inclusive, initial training topics usually cover:
• Company and aircraft manual management;
• Records control and its associated system of reporting;
• Maintenance scheduling;
• Organizational procedures and techniques;
• Specialized equipment and its use;
• Aircraft type, aircraft systems, and ground equipment;
• Specific skills, such as avionics, composite repair, aircraft run-up and taxi training, and skills upgrade;
• A general overview of human factors training as applicable to aircraft type; and
• Other task-specific training that ensures predefined and validated competencies.
2.7 On-the-Job Training (OJT).
2.7.1 OJT is direct instruction, usually one-on-one training located at the job site. A large majority of maintenance learning occurs through OJT training. OJT is a planned, structured training event conducted at a worksite and validated by a designated OJT trainer. This type of training provides direct experience in the work environment in which the employee is performing or will be performing on the job.
2.7.2 Since OJT is a one-on-one exchange, it provides a method for the CAMP organization to evaluate individual competencies and ensure employees understand the task expectations and performance standards. It is often the final validation that employees have the knowledge and skill to perform a task competently before being fully authorized to perform on their own. A well-managed OJT program that utilizes instructors that are current and well-versed in the task is an asset to a CAMP Training Program. However, a poorly managed OJT program presents a high-risk safety issue. It can be the root cause of bad habits, tribal knowledge, and repeated norms that can cause noncompliance or create unsafe conditions.
2.8 Recurrent Training.
2.8.1 Recurrent maintenance training, also known as refresher training, is continuing education that occurs on a repetitive basis to ensure the individual maintains a required level of competency and remains capable of properly performing their assigned job. Recurrent training also is used to introduce the employee to aircraft modifications; new or different ground equipment; new procedures, regulations, techniques, and methods; or other new information. The training program should have procedures to determine the type and frequency of recurrent training required for each of its employees through the needs assessment process (see paragraph 3.4).
2.9 Requalification Training. › 2.9.3 Maintenance personnel meet requalification training objectives by…
2.8.2 The recurrent training program usually includes two types of training:
• Training conducted on demand to bring employee skills and competencies up to date with existing equipment, new/different equipment, and/or procedures; and
• Training conducted on a scheduled basis to maintain employee competency (refresher training).
2.8.3 Recurrent training should not include repetitive information unless it is necessary to maintain the desired degree of competence. Examples of recurrent training include:
• Continuing training based on individual competencies that is designed to maintain regulatory and certificate currency requirements;
• Training on a seldom-accomplished task or seldom-used skill;
• Update training for particular tasks or skills, which can include the use of training bulletins, bulletin board items, self-study tasks, and computer-based instruction;
• Scheduled recurrent human factors and safety management training;
• Specific training designed to correct deficiencies identified by CASS, self-disclosure programs, or other event reporting systems; and
• Any other continuing education or training not provided on a defined schedule.
2.9 Requalification Training.
2.9.1 Requalification training is conducted specifically to restore previously qualified maintenance personnel to a qualified status in a particular task or job assignment. To be eligible for requalification, maintenance personnel must have been previously qualified in that particular task or job assignment and have subsequently lost that qualification.
2.9.2 Maintenance personnel become unqualified when they fail to:
• Remain current through experience as required by the regulations (i.e., are not current), or
• Complete recurrent training within the eligibility period established by the CAMP Training Program (i.e., becoming overdue).
2.9.3 Maintenance personnel meet requalification training objectives by completing requalification curriculum segments. The reasons for and the length of the maintenance personnel’s unqualified status will usually determine the training and qualification curriculum segments needed for requalification. Requalification may be as simple as having individuals demonstrate their ability to accomplish tasks for which they were previously qualified, or having the individual repeat the initial training for the task.
2.11 Aircraft/Airplane Equipment Specific Training. › 2.11.3 Your CAMP Training Program should provide sufficient instruction…
2.10 Remedial Training.
2.10.1 Remedial training assists an employee in building knowledge, skill, or aptitude for performing specific tasks where deficiency in competence has been demonstrated. The maintenance training portion of the manual should have procedures to determine when an individual requires remedial training. In some instances, this type of training should consist of a suitably experienced individual who reviews procedures with an employee through OJT. The maintenance training program should be especially flexible in this area and provide the means necessary to provide the individual in need with the immediate knowledge or skill in which they were found to be deficient. Remedial training may focus on one individual at a time, but can also be delivered to several individuals at the same time if more than one person was involved with triggering the specific or reoccurring event.
2.10.2 Successful remedial training will show an individual what happened, why it happened, and, in a positive manner, how to prevent it from happening again. Remedial training and its general use and descriptions will be part of the maintenance training portion of the manual and may be included within the recurrent training requirements.
2.11 Aircraft/Airplane Equipment Specific Training. For example, type, engine, accessories, etc.
2.11.1 The CAMP Training Program portion of your manual outlines and explains your expectations in order to qualify individuals to perform work for you on specific airplanes or other products or articles. This training is specific to the type of work being performed (e.g., heavy maintenance, light maintenance, or aircraft line maintenance, and considers aircraft size and type). Aircraft/airplane equipment-specific training is technical training applied formally and followed up with OJT. It is very specific in the use and references within your manual system that provides the methods, techniques, and practices that must be followed.
2.11.2 Your CAMP Training Program is your method to ensure each person performing maintenance, preventive maintenance, or an alteration on an aircraft, engine, propeller, or appliance knows where to find and use the methods, techniques, and practices prescribed in your manual. Each person must know how to obtain and use the tools, equipment, and test apparatus necessary to assure completion of the work in accordance with your procedures. If the manufacturer recommends special equipment or test apparatus, you must ensure they know how to use that equipment or apparatus or its equivalent.
2.11.3 Your CAMP Training Program should provide sufficient instruction so that individuals know how to determine that the adequacy of their work, and (if required) the work of others, is in the manner prescribed by you. Personnel should receive instruction in the use of your manuals and equipment. This enables them to be able to validate that the work done is in such a manner and the materials used are of such a quality that the condition of the aircraft, airframe, aircraft engine, propeller, or appliance worked on is at least equal to its original or properly altered condition. This is with regard to aerodynamic function,
2.12 Specialized Tasks. › 2.12.2 Specialized training also may include enrichment training…
structural strength, resistance to vibration and deterioration, and other qualities affecting airworthiness, as required by part 43, § 43.13(b).
2.11.4 Your CAMP Training Program should educate individuals in your approved methods to identify inspections or other maintenance identified as airworthiness limitations (AL). Individuals must understand the strict need to follow your approved instructions for continued airworthiness when performing an AL inspection or maintenance.
2.12 Specialized Tasks.
2.12.1 Maintenance training for specialized tasks focuses on competency in specific tasks or areas of responsibility. The training program may combine specialized task training with initial or recurrent training. The maintenance training portion of the manual should identify job assignments that require special skills or are complex. It should also identify the associated specialized training needed to validate that the individuals assigned have the skills and ability to competently perform the work. Some subject areas that may require specialized training include:
• Special inspection or test techniques, such as nondestructive inspections;
• Special machining operations;
• Complex welding operations;
• Complex assembly operations;
• Complex rigging procedures;
• Engine test cell runs; and
• Engine overhauls.
Note: Individuals who attend specialized training and develop competency in a particular job assignment or task may be tasked by the organization to convey the information to other employees. This would be a form of OJT.
2.12.2 Specialized training also may include enrichment training courses that are not necessarily required for a qualification but are simply a means to enhance skills and knowledge in support of an individual’s trade or subjects that are not maintenance related, such as:
• Management skills training for new supervisors,
• Computer skills, or
• Other training necessary because of a change in an individual’s duties and responsibilities.
2.14 Maintenance Provider Training. › 2.14.1 You may arrange with another person for the performance of your CAMP.
2.13 Competency-Based Training.1
1 The information cited in paragraphs 2.13.1 through 2.13.3 is available at https://www.efrontlearning.com/blog/201 5/10/4-ways-to-implement-a-competency-based-training-program.html.
2.13.1 This training measures employee learning rather than time spent in training or in class. Its focus is on the learning achieved in the course and the rate of its transfer to the performance context. It allows flexibility to move through training based on the skills of the learner. Learners are able to tackle chapters and exercises in any order they desire. The grading scheme measures student knowledge, skills, ability, and performance.
2.13.2 Consider the power of technology for teaching and learning. This can give learners the ability to respond to each other’s help questions, making leaders in those respective areas. A typical feature of competency-based training is that it may be computer mediated. This training could be online in a learning management system, or it could be standalone. Educational technology provides the desired flexibility to modify the training and development plans according to the learners. Technology fulfills the learning measurement requirement of the competency-based program. Have the learners submit their assignments using a variety of educational technology tools. Create links to tutorials or create short tutorials that teach learners how to use a tool to develop an assignment. You can use Facebook, YouTube, and Twitter to communicate with your learners by creating dedicated course pages in these social media applications. In short, try to re-create the real-world work environment scene through productivity-enhancing technology.
2.13.3 Shift the focus from the trainer to the trainee. When trainers become talking heads holding scheduled training sessions for a predetermined time, the instruction takes place at the trainers’ pace. For most trainees, this will be the wrong pace. Some will need to go more slowly; others will be able to move much faster. Competency-based learning shifts the role of the trainer from that of “a sage on the stage” to a “guide on the side.” Trainers become the mentors who redirect conversations to synthesize and transfer knowledge according to the work context of the learners. This is one of the biggest benefits of an eLearning course. Learning is focused more on the learner than on the trainer. This means that the course dynamics will change with each batch of learners based on their unique needs, experiences, and goals.
2.14 Maintenance Provider Training.
2.14.1 You may arrange with another person for the performance of your CAMP. A maintenance provider is a person other than one you have trained and employed directly. However, you must ensure those maintenance providers who determine the adequacy of work know how to access your manuals and are able to meet your expectations. Persons who perform work under your CAMP must have a full understanding of their assigned duties and authority and fully understand that performance in accordance with your CAMP is required. You may administer your CAMP Training Program to a maintenance provider, or you may accept the maintenance provider’s training. To accept a maintenance provider’s training, your CAMP manual will include policies, procedures,
2.14 Maintenance Provider Training. › 2.14.2 When you arrange with another person to perform the work of your…
methods, and instructions for you to assess the maintenance provider’s training and ensure competence by your standards. Your CAMP manual will include a means to present, explain, and ensure the methods, techniques, and practices defined in your manual are understood.
2.14.2 When you arrange with another person to perform the work of your CAMP, your CASS must be especially diligent to validate the performance and effectiveness of your CAMP. Your CASS is always required to correct deficiencies in your program regardless of whether those programs are carried out by you or by another person. When deficiencies (related to competence) are identified, your CASS must be able to influence and correct a maintenance provider’s training whether this training is administered by you or by the provider. A maintenance provider may have a very robust training program; however, you must ensure those you contract with and authorize to perform maintenance (including inspection), preventive maintenance, and alterations understand and do so per your manual. You may arrange with another person for the performance of any maintenance, preventive maintenance, or alterations. However, this does not relieve you of the responsibility for the airworthiness of your aircraft (including airframes, aircraft engines, propellers, appliances, and parts thereof) and the performance of the maintenance, preventive maintenance, and alteration of your aircraft (including airframes, aircraft engines, propellers, appliances, emergency equipment, and parts thereof) in accordance with your manual.
3.3 Competency Standards. › 3.3.2 Your CAMP job tasks require competencies that are general,…
CHAPTER 3 TRAINING PROGRAM BASIC COMPONENTS
3.1 General Components.
3.1.1 An effective CAMP Training Program will reflect the size and complexity of your CAMP. These training programs can range from small and simple to large and complex. The following sections describe components of an effective CAMP Training Program. These sections or their equivalent should be documented in the manual section that contains your CAMP:
3.2 Job Analysis.
3.3 Competency Standards.
3.4 Training Needs Assessments.
3.5 Course Development.
3.6 Training Completion Documentation.
3.7 Training Program Review and Evaluation.
3.2 Job Analysis.
3.2.1 Job analysis is the foundation for all competency assessments and selection decisions. To identify the best person for the job, it is crucial to fully understand the nature of that job. Job analysis provides a way to develop this understanding by examining the tasks performed in a job, the competencies required to perform those tasks, and the connection between the tasks and competencies.
3.2.2 Information from a job analysis is used to determine job requirements within your CAMP. From this analysis, you can establish your training needs and position descriptions. Job analysis will establish where you need positions and which of these positions are directly in charge of your maintenance activities. It is through job analysis that you are able to accomplish performance appraisals, enhancements, correction, and job promotion.
1. Job analysis of your CAMP requires you to evaluate measurable patterns of knowledge, skills, abilities, behaviors, and other characteristics (competencies) that an individual needs to perform your CAMP tasks and functions successfully.
2. Your CAMP job task analysis should focus on the “how” of performing CAMP job tasks, or what the person needs to do in order to accomplish the task successfully.
3.3 Competency Standards.
3.3.1 Competency standards are the measurable pattern of knowledge, skills, abilities, behaviors, and other characteristics that are needed to perform your CAMP duties and job tasks.
3.3.2 Your CAMP job tasks require competencies that are general, technical, or both.
1. General competencies reflect the cognitive and social capabilities (e.g., problem solving and interpersonal skills) required for job performance under your CAMP.
2. Technical competencies are more specific as they are tailored to the particular knowledge and skill requirements necessary for a CAMP-specific job.
3.4.2 Assess three levels of your CAMP organization: › 3.4.2.2 Occupational assessments examine the knowledge, skills, and…
3.3.3 A person who is competent in your CAMP knows how to determine the adequacy of their own work, and (if required) the work others do, in relation to and in accordance with your manual.
3.3.4 To perform under your CAMP, individuals must understand their respective roles toward releasing airworthy aircraft into service. Competent personnel have a full understanding of their assigned duties and authority. They fully understand their part in your overarching responsibility to ensure airworthiness.
3.4 Training Needs Assessment.
3.4.1 Assessing what knowledge, skills, and abilities your entire CAMP organization needs to manage and apply your CAMP effectively will allow you to structure your CAMP Training Program to the size and scope of your overall CAMP maintenance organization. A training needs assessment ensures that throughout your organization competent personnel are available to determine the adequacy of work.
3.4.2 Assess three levels of your CAMP organization:
3.4.2.1 An organizational assessment determines where you need certain competencies to lead, guide, perform, and control your CAMP. This assessment relies on real-life analysis of your CAMP and the conditions under which your operation exposes it. An unbiased analysis of these conditions will identify where you need leadership, technical skill, inspection expertise, and supervisory competencies. Reliance on facts and data rather than norms, favoritism, cronyism, and office politics will allow you to take advantage of personnel strengths, mitigate process risk, and manage human behavior. Continual analysis and surveillance of positions within your CAMP organization will allow you to ensure the right people, with the right skills, are in the right position regardless of changing demographics, operational trends, technology, and the economy. Understanding the competency demands of your organization’s positions will allow you to take full advantage of the strengths of your people and prepare them for the duties you expect them to perform both now and in the future.
3.4.2.2 Occupational assessments examine the knowledge, skills, and abilities in relation to the authority you delegate to individual groups (e.g., directors, managers, inspectors, Required Inspection Item (RII) authority, mechanics, maintenance control, maintenance planning and scheduling, recordkeeping, receiving inspection, etc.). Continual occupational assessment of group performance of your CAMP will identify discrepancies or gaps that creep in over time. Regularly scheduled and routine occupational assessments will
3.4.3 Training needs assessment process: › 3.4.3.1 A CAMP organization must have a means to determine that all of…
allow you to enhance through training the competencies needed to perform your CAMP job-related duties and tasks. Your occupational assessment becomes the mechanism to introduce new and more efficient ways to do the work of your CAMP while eliminating competency gaps.
3.4.2.3 Individual assessments analyze how well an individual employee is doing a job and determines the individual’s capacity to do new or different work. Individual assessment provides information on which employees need training and what kind.
3.4.3 Training needs assessment process:
1. Establish training program goals and standards.
2. Perform CAMP organizational, occupational group, and individual job analysis.
3. Establish certification and qualification standards for:
• Your Director of Maintenance (DOM) and Chief Inspector.
• Those directly in charge of maintenance (including inspection).
• Those who may perform maintenance (including inspection), preventive maintenance, and alterations.
• Those with approval for return-to-service authority.
• Those required to perform required inspections.
• Those who review records to ensure aircraft airworthiness.
4. From your job analysis, identify specific competencies (e.g., knowledge, skills, and abilities) needed by:
• Those who work under your CAMP to fill specific CAMP organizational oversight positions.
• Those who work under your CAMP to fill an occupational group position.
• All individuals who perform under your CAMP, including maintenance provider individuals performing contracted CAMP work.
3.4.3.1 A CAMP organization must have a means to determine that all of its maintenance personnel, including maintenance provider personnel, are competent to accomplish their duties. An individual needs assessment evaluates the current capability of its technical and nontechnical employees. An employee needs assessment usually is performed when an individual is hired; however, the CAMP organization may require a needs assessment when an employee changes jobs. Even though only those individuals performing maintenance, preventive maintenance, alterations, or required inspections (and those who determine the adequacy of work) must be trained under §§ 91.1433, 121.375, and 135.433, the certification rules §§ 119.65 and 119.69 require the organization to have sufficient management and technical personnel to ensure
3.4.3 Training needs assessment process: › 3.4.3.5 Your CAMP training assessment must ensure competent people are…
safety. These individuals who serve in the organization must be qualified (through training, experience, and expertise to the extent of their responsibilities) and have a full understanding of the material governing the operation. While you may hire individuals with the training, experience, and expertise you require, your CAMP Training Program identifies the competencies required of these positions. The CAMP Training Program empowers you to train and prepare your employees for management roles and responsibilities within your organization.
3.4.3.2 The training program should differentiate between those employees that require training under §§ 91.1433, 121.375, and 135.433, and those trained at its discretion and in accordance with its organizational procedures. An assessment of each employee’s capabilities should be made as it relates to the tasks they are expected to perform and will identify employee-specific training needs.
3.4.3.3 When carrying out any assessment of an individual’s capabilities, the assessment process should be as objective as possible and well-structured to produce consistent results. The training program should have procedures to ensure the individual conducting the assessment is qualified to conduct the evaluation and interpret the results. It may be necessary to use more than one method to adequately assess an individual’s capability.
3.4.3.4 The training program also should have procedures to accept prior experience, training, or education to establish an individual’s capability. For example, a CAMP organization may accept graduation certificates from a 14 CFR part 147 school and/or an Airframe and Powerplant (A&P) certification as acceptable evidence of a basic knowledge and skill level in a particular area. A CAMP organization also could have procedures for accepting certificates/documentation of previous training by manufacturers, airlines, operators, or associations, and also maintenance experience obtained at airlines, operators, repair stations, or the military. The CAMP organization should have procedures to document the assessment in the individual’s training records.
3.4.3.5 Your CAMP training assessment must ensure competent people are available. Employee evaluation methods and their usefulness are listed in Table 3-1.
Table 3-1. Employee Evaluation Methods
Method for Capability Evaluation Usefulness of Method
Formal examination This may include development of formal written test procedures with pass/fail criteria. While it is an effective method for assessing knowledge, it does not necessarily determine whether an individual can apply the knowledge to the assigned tasks.
Certificate Possessing a certificate may be a prerequisite for some specialized positions. The certification of qualifications or education from a credible source can measure an individual’s knowledge. However, it does not necessarily assess the individual’s ability to apply that knowledge to assigned tasks.
Completion of a training course
A review of the documentation or instruction provided may be used to establish an individual’s knowledge of a subject. Completion of training courses is most useful when there is some verification, through testing or demonstration, that the individual absorbed the course objectives. However, successful completion of a training course does not necessarily translate into the ability to accomplish a task.
Practical evaluation A practical evaluation permits the employee to demonstrate skills in a controlled environment that is similar to a situation, or part of a situation, encountered in real life. Such an evaluation might, for example, allow the reviewer to focus on the critical steps in a time-consuming process without actually going through the entire process. This can be an effective way to determine an individual’s capability; however, the assessment can depend on the skills of the individual designing the practical evaluation mechanism.
Group exercise A properly designed group exercise can help demonstrate the understanding of a group that must work together on a project. Where an employee’s understanding of their role in a larger scheme is important, a group exercise that tests that knowledge in an appropriate context can illuminate whom within the group needs assistance and can illuminate human factors elements of the training that might otherwise be misunderstood by the students. This process lends itself well to immediate remedial training as well as reinforcement of the training given to other members of the group, where properly administered.
On-the-job assessment These types of assessments should be objectively based and judged by successful accomplishment of specified tasks. This is an effective way to determine an individual’s capability; however, the assessment can depend on the skills of the individual accomplishing the assessment unless objective criteria are established.
3.4 Training Needs Assessment. › 3.4.4 Figures 3-1 through 3-4 provide examples of documentation for a…
Method for Capability Evaluation Usefulness of Method
Oral examination in the working environment
These types of assessments should be objectively based and judged by the proper response to a consistent set of questions. This is an effective way to assess an individual’s knowledge and ability to apply that knowledge. It also is a valid method of determining whether an inspector or supervisor is capable of reading, writing, and understanding the English language. However, it can depend on the skills of the individual conducting the examination unless objective criteria are established.
Note: The above list of evaluation methods should not be considered exhaustive. Unique instructional and teaching methods often give rise to unique evaluation mechanisms. The FAA encourages the use of new techniques for conducting evaluations.
3.4.3.6 Your CAMP training assessment can allow you to address human error due to lack of competency.
1. A human factors analysis looks at how your employees communicate and perform in the work environment and then seeks to incorporate that knowledge into the design of equipment, processes, and organizations.
2. Analysis of human factors will identify issues affecting how people interface with technology and operational systems; how well people understand new or changed equipment, technology, and documentation; and how well people perform within the general workplace environment.
3. Knowledge gained from human factors analysis can help you avoid maintenance errors, ensure that an individual’s initial skill sets match task requirements, and enhance the overall work environment.
3.4.3.7 Document the results of the training assessment and the standards required for each job position or task. Each CAMP organization may approach this documentation differently, but the ultimate outcome should be a document outlining the training requirements by category. For example, a CAMP organization may define training based on:
• Job positions or functions,
• Job tasks,
• Aircraft worked on, or
• A combination of the above.
3.4.4 Figures 3-1 through 3-4 provide examples of documentation for a training needs assessment. These are examples; the exact format is up to you.
Figure 3-1. Sample Training Needs Assessment Documentation by Job Description
and Task
Figure 3-2. Sample Training Needs Assessment Documentation by Type of Work
Figure 3-3. Sample Training Needs Assessment Documentation by Job Description
Figure 3-4. Sample Training Needs Assessment Documentation by Job Description
and Timeframe
3.5 Course Development. › 3.5.2 Define the Course. Each course should define the following:
3.5 Course Development.
3.5.1 Develop the Course. Once the CAMP organization identifies its training requirements for each job function from its needs assessment, it should have procedures to begin developing or defining the individual courses it needs to meet those requirements. The training program should have procedures to develop each course or course of study, regardless of whether the course will be taught in-house or by an outside vendor. Consider the following as you develop a training course:
• Purpose of the training;
• The in-service experience of the personnel on the aircraft type or equipment, if applicable;
• Feedback from in-service difficulties/occurrence reporting;
• Significant Airworthiness Directives (AD) and/or Service Bulletins (SB); and
• Known human factors issues associated with the particular aircraft type.
Note: An outside vendor may be used to develop any part of a training course or develop and provide the entire training program. However, the CAMP organization is responsible for its performance and effectiveness.
3.5.2 Define the Course. Each course should define the following:
• Purpose,
• Applicability,
• Prerequisites,
• Detailed subject matter to be covered,
• Objective or desired outcome (gained technical knowledge or skill),
• Time requirements (if desired), and
• Course completion standards.
Note: Studies have shown that it may be better to train individuals to a competence-based standard rather than require a specific number of training hours to ensure employees have the competencies needed for their jobs. This type of training does not need to be done on a defined schedule or for a specific number of hours. Rather, CAMP organizations would test each individual to evaluate what training they need. Training to competence permits a CAMP organization to tailor its training programs to the specific requirements of its individual maintenance personnel and maintenance providers.
3.5.3 Identify the Training Method. › 3.5.3.2 On-the-Job Training (OJT).
3.5.3 Identify the Training Method. The training program will outline and describe the appropriate training method for each course. There are many training delivery methods available. Each training program may include some or all of the following training delivery methods, as applicable to a particular course or operation.
3.5.3.1 Formal Classroom Instruction. Training can be structured as a formal course delivered by an instructor in a classroom setting. The value of this delivery method depends on the objectives and subject matter of the training. The interaction among students and between students and a knowledgeable instructor is very important for certain types of information to be transferred. Consequently, classroom discussions are important. This type of training, which is typical in a formal school environment, depends heavily on the quality of the instructor. It also requires relatively long periods away from the normal workplace. However, it may be cost effective because a classroom setting can accommodate a number of students at once.
3.5.3.2 On-the-Job Training (OJT). OJT is a process of learning while watching another demonstrate a task, and then accomplishing the same task under that individual’s supervision. It is a very effective method of training for subject matter and tasks that are difficult to understand if described, but relatively easy to understand while observing the task being performed. Practical skills are best taught using OJT. OJT depends heavily on the capability of the instructor. Typically, OJT is given by an individual very experienced in the technical subject matter being taught. Even with a very capable instructor, the training organization should ensure all OJT is well structured to ensure all the key elements of the training are included and treated the same way from one instructional period to another. It is paramount that OJT be provided by maintenance production personnel and no other individuals, such as quality control inspectors. Having well-qualified OJT instructors is essential for OJT to be effective. The instructors should be thoroughly familiar with the knowledge, skills, and objectives of the training and should be capable instructors. It is not enough for an instructor to be technically qualified. An instructor also should be able to impart that knowledge and/or skill to another. The training program should have a process to verify that its OJT instructors are qualified and the quality of the OJT instruction is acceptable. The FAA expects the CAMP organization to have a logical process for selecting and monitoring its instructors. OJT usually is most effective when:
1. The trainees already have prerequisite knowledge and skills and do not need detailed explanations or lengthy discussions.
2. The target skill or knowledge can be taught or is best learned only in an actual work environment.
3. The work environment cannot be reasonably simulated or replicated in the classroom or with computer-based training (CBT) devices.
4. The training process very closely matches the actual tasks that would be performed.
3.5.3 Identify the Training Method. › 3.5.3.5 Embedded Training.
5. OJT best matches the needs and constraints in terms of scheduling, costs, and human resources.
6. There are documented course outlines, measures of effectiveness, and training records.
7. There are qualified instructors readily available.
3.5.3.3 Computer-Based Training (CBT). Interactive CBT courses can be used to impart knowledge and teach practical skills at the correct pace for each employee and produce certificates of training at the completion of the course. CBT can be accomplished at any location at times convenient for each employee. To ensure the effectiveness of this type of training, the training program, Continuing Analysis and Surveillance System (CASS), and Safety Management System (SMS) should evaluate the information provided against its particular needs.
3.5.3.4 Distance Learning. Distance learning applies to situations where the instructor and the employees are not in the same location. It can take the form of mail-based correspondence courses using written, videotaped, or CBT materials; videoconferencing, teleconferencing, or a combination of both, sometimes called “virtual” classrooms; or intranet-based instruction that allows employees to interact with an instructor or with courseware similar to CBT. The advantages of this training method are that the courses can be tailored to a specific need and an instructor can respond to individual questions. The disadvantages are that the communications can be misinterpreted because of technical difficulties, and the interaction of the employee and instructor may be inhibited.
3.5.3.5 Embedded Training. Some equipment, particularly those that use software for testing or to perform a maintenance function, have training embedded into the process. Incorporating a tutorial or “help” menu are simple examples of how a software program can provide instruction as the user performs a specific task. Embedded training is most useful when:
1. The employee already knows the underlying technical information related to the basic task and needs only to learn the details of the procedure;
2. The procedure is straightforward and can be easily understood with a written explanation;
3. The media and method in which training is embedded are part of the task or equipment to be learned; and
4. There is a method to assess the employee’s performance and a record that the training took place.
3.5.4 Identify the Training Sources. › 3.5.4.6 Other Sources.
3.5.3.6 Other Methods. Other methods include self-study, case study, video-recorded demonstrations, and seminars. These methods of training or acquiring knowledge may be appropriate provided the information gained applies to the job function and skills required to perform the work capably.
3.5.4 Identify the Training Sources. The training program should describe procedures for selecting a particular training source. The CAMP organization may elect to provide training in-house using its own personnel or contract with an outside vendor. Some common vendor training sources include the following:
3.5.4.1 Original Equipment Manufacturers (OEM). OEMs may deliver technical information regarding maintenance or alteration on its articles by formal classroom instruction, OJT, distance learning, embedded technology, or CBT material. OEM instructors may come to a CAMP facility to conduct training onsite or deliver the information during seminars, sessions, or extended study at other locations. When the organization chooses to use an OEM course, it should ensure its employees have the prerequisite training and/or experience for the course to be most effective. In addition, the organization should verify that the area of study, course objective, material, and any instructors assigned by the OEM meet the CAMP organization’s training standards.
3.5.4.2 Aviation Maintenance Technician Schools (AMTS). An AMTS approved under part 147 can be an effective source of training, particularly for basic knowledge and skills. A CAMP Training Program may need to supplement the training with information unique to its operations and equipment.
3.5.4.3 Repair Stations. Repair stations may provide specific employees with specialized training by contract.
3.5.4.4 Government Agencies. Government agencies provide training on Occupational Safety and Health Administration (OSHA) regulations, Environmental Protection Agency (EPA) regulations, and hazardous materials (HAZMAT) recognition and handling. They also may be a source of training related to maintenance human factors and general safety subjects.
3.5.4.5 Trade Associations. Entities that represent certain segments of the aviation or business community offer training classes on technical and regulatory subjects. Again, the training organization must ensure the individual attending the training completed the course and acquired the necessary knowledge required by the particular maintenance operations and that the course meets the CAMP requirements.
3.5.4.6 Other Sources. There are a variety of other training sources, including independent seminars, product demonstrations, computer-based instructions, and videos. Your CAMP Training Program should view all sources of information as potential training sources. The training program should have a
3.5.5 Define Instructor Qualifications and Classification. › 3.5.5.2 Industry research has shown that instructors usually are…
method of incorporating training opportunities to ensure each employee is capable of performing their assigned task.
Note: Regardless of the training source, the CAMP organization remains responsible for the administration, adequacy, and currency of its training program and for maintaining the training records.
3.5.5 Define Instructor Qualifications and Classification.
3.5.5.1 During the development of the course, the CAMP Training Program should have procedures to define instructor qualifications and qualify instructors. The procedures will include employees, individuals hired temporarily, and vendor instructors. The CAMP organization must have controls that ensure the instructor has the technical background and teaching skills necessary to effectively communicate the course material. When developing instructor qualifications, the CAMP Training Program should:
1. Define the instructors’ experience requirements, including the minimum maintenance experience and/or certifications required.
2. Define any requirement to maintain appropriate other certifications, such as those related to the requirements of OSHA, the EPA, and the Department of Transportation (DOT).
3. Define the instructors’ duties and responsibilities.
4. Define instructor evaluation, qualification, and authorization, to include:
• Evaluate an instructor’s level of knowledge, experience, and background relevant to a course.
• Evaluate an instructor’s communication and teaching skills.
• Initially qualify an instructor to teach a particular course.
• Provide formal instructor training and professional development.
• Continually evaluate instructor proficiency.
• Document instructor qualifications and authorizations.
Note: The CAMP Training Program will define the qualifications of its instructors and describe the methods used to ensure any instructors it uses meet those qualifications.
3.5.5.2 Industry research has shown that instructors usually are classified by type, such as:
1. Maintenance Instructor. This is usually a full-time organizational employee who has met the qualifications for the position as described by the job description to teach and/or participate in the development of certain courses.
2. Contracted Instructor. This is a third-party training vendor contracted and authorized by the maintenance department to teach. A CAMP organization may use contracted instructors to supplement its training program to develop and teach specialized courses or to train maintenance instructors. However, contracted instructors must still follow the CAMP Training Program.
3.5.6 Measure Training Effectiveness. › 3.5.6.1 Does the employee understand the material?
3. Assigned Maintenance Instructor. An assigned maintenance instructor provides instruction on an as-needed basis. These individuals usually teach specialized skills requiring expertise in a particular subject area, such as fueling, deicing, or taxi/engine run. These instructors should be fully versed and knowledgeable in their specialty.
4. Adjunct Instructor. This is an employee with great skill in a particular area with the authority to teach a course usually taught only by a maintenance instructor. Adjunct instructors differ from “assigned maintenance instructors” in that an adjunct instructor usually is, for practical purposes, a member of the training department, and their duty is to teach courses that “assigned maintenance instructors” are qualified to teach.
5. OJT Instructor. This is an employee and experienced subject matter expert who teaches task-specific skills and information to others on the job. This type of instructor should be able to perform the assigned tasks satisfactorily and should be able to transfer competency skills, knowledge, and techniques to students. This person will monitor the performance level of students and determine their competency skills, knowledge, and abilities.
6. Practical Examiner. The CAMP organization will designate these individuals. They can be either an organization’s employee or a third party. They administer practical tests, such as engine run and taxi practical tests.
3.5.6 Measure Training Effectiveness. The CAMP Training Program will describe a process to evaluate training effectiveness from different perspectives. This process is distinct from your CASS and SMS reviews; however, the data your CAMP Training Program review produces will be assessed by CASS and SMS.
3.5.6.1 Does the employee understand the material? The first measure of effective training is usually accomplished with oral or written tests. After each course, employees should be able to demonstrate (via an examination) an understanding of applicable systems and their operation. They should be allowed and encouraged to access maintenance manuals or instructions as the ultimate source for task performance. Regular use of approved manuals is essential to ensure safe and effective performance of maintenance and inspection tasks.
3.5 Course Development. › 3.5.7 Course Curriculum and Outline.
3.5.6.2 Did the employee demonstrate the ability to perform the tasks for which the training was given? This normally consists of a practical demonstration of the task by the student. Individuals should be able to demonstrate their skill and ability to:
1. Work according to the maintenance manual and other relevant instructions appropriate for the type of aircraft and task at hand;
2. Correctly use technical literature and documentation associated with the performance tasks;
3. Correctly identify and use special tooling and test equipment; and
4. Competently perform removal and replacement of components and modules unique to the type, including any on-wing maintenance activity.
3.5.6.3 As a course concludes, training instructors should evaluate the effectiveness of that course as well as their own performance.
3.5.6.4 The CAMP Training Program should obtain feedback from employees and review subject areas that may have been commonly misunderstood. Training instructors should be open minded and allow course critiques, self-evaluations, and information sharing to improve the overall effectiveness of the course.
3.5.7 Course Curriculum and Outline. At the completion of the course development phase, the CAMP Training Program will produce a course curriculum or equivalent that includes:
1. The course title.
2. Applicability. Identify to whom the course applies.
3. Objective or desired outcome. A statement that clearly describes what employees will be able to do at the conclusion of the training. For example, successfully perform and document maintenance actions.
4. Prerequisites or minimum student qualifications prescribed by the regulations or required by the CAMP organization for enrollment in the course. For example, the type of airman certificate, aircraft, product and/or article qualifications, previous training, experience with other operators, and recent experience requirements.
5. Anticipated time of instruction for completion and/or the knowledge or skill requirements that must be demonstrated to obtain credit for the course/lesson.
6. Training methods. How the course will be taught, such as classroom or OJT.
7. Training sources. Identifies who teaches the course, and whether it is taught in-house or provided by a vendor.
8. Instructor qualifications. The qualifications an instructor needs to have to teach the course.
9. Qualified instructors. Identifies who is qualified and authorized to teach the course.
3.5 Course Development. › 3.5.8 Documentation Examples.
10. Method of evaluation/course completion standard. The method the instructor will use to validate the degree to which learning objectives have been met, including minimum test scores.
11. A course outline arranged by major topics and subtopics.
12. A lesson plan that includes teaching aids, major points, notes, and references for use by the instructor.
13. A study guide containing training data for the employee that supports the course presentation and allows the employee to take notes.
14. Training certificates, forms, and/or training records. These types of documents are used for recording student attendance, progress, and/or completion and to justify certain authorizations, such as airworthiness release, approval for return to service, RII, engine run, and aircraft taxi.
3.5.8 Documentation Examples. Figures 3-5 and 3-6 provide examples of course requirements documentation. The FAA is not prescribing these examples, but merely providing samples used by the industry.
Figure 3-5. Sample 1 of Course Requirements Documentation
3.6 Training Completion Documentation. › 3.6.2 A CAMP Training Program should provide a means to retain its…
Figure 3-6. Sample 2 of Course Requirements Documentation
3.6 Training Completion Documentation.
3.6.1 A CAMP Training Program should provide a means to document employee training. The competency of each employee depends on acquired training, knowledge, and experience. Consequently, an important source of information to determine employee competencies is the employee’s training records.
3.6.2 A CAMP Training Program should provide a means to retain its training records electronically or as a hard copy. In either case, standardize the format and content of your training records according to your organizational, occupational, and individual training needs assessments. A review of industry practices suggests that each employee’s record should contain at least the following information:
1. Name and job position.
2. Employment history or résumé.
3. Training requirements as determined by the employee’s needs assessment, including requirements for indoctrination, initial and recurrent, and other training required by areas and course titles.
3.7 Training Program Review and Evaluation. › 3.7.2 A variety of sources will influence a CAMP Training Program evaluation
4. FAA certificates applicable to the employee’s qualifications. For example, supervisors, RII personnel, and individuals approving articles for return to service must be appropriately certificated under 14 CFR part 65.
5. Other certifications, diplomas, and degrees.
6. Authorizations and qualifications (other than those listed in item 4).
7. Proof of training course completion, if determined applicable to capabilities. This includes training provided by other employers.
8. A list of accomplished training, to include enough information to determine whether it is applicable to the employee’s capability to perform assigned tasks. Such information may include:
• Course title or description,
• Course objective,
• Date completed,
• Test results,
• Total hours of training,
• Location of training,
• Name of instructor and instructor qualifications, and
• Signature of employee.
9. Any other relevant documentation determining the capability to perform tasks associated with assigned duties, such as past employment as well as written, oral, and practical test results.
3.6.3 The CAMP Training Program, CASS, and SMS should have procedures to regularly review all training records to ensure they comply with the requirements set forth in the training program manual.
3.7 Training Program Review and Evaluation.
3.7.1 The CAMP Training Program and your CASS should have documented schedules set to provide for periodic review of the training program. During this review, determine if any changes should be made to the program, including revising, adding, or deleting courses. These periodic reviews should validate that your annual training plan is effective. The program should have a means to document this review.
3.7.2 A variety of sources will influence a CAMP Training Program evaluation:
1. Student course feedback through course evaluations and student course assessment results.
2. Negative trends in quality control inspection results for finished work.
3. Voluntary disclosures that have root causes of improper training or a lack of training.
4. Internal audit results.
5. CASS program findings.
6. Aircraft, equipment, or tooling changes.
7. Employee recommendations or concerns due to competencies for work assignments or training needs.
8. Industry trends and shared information.
9. FAA and operator information gathered during an investigation of noncompliance.
CHAPTER 4 MAINTENANCE TRAINING COURSE SUBJECTS
4.1 Regulatory Maintenance Training Course Subjects.
4.1 Regulatory Maintenance Training Course Subjects. › 4.1.2 Course Subjects.
4.1.1 The Manual.
4.1.1.1 A manual is required of part 91K fractional ownership program managers and part 121 and most part 135 air carriers. It is the foundational document that includes the instructions and information necessary to allow personnel concerned to perform their duties with a high degree of safety. Sections 91.1427, 121.369, and 135.427 require you to place in your manual:
• The inspection program;
• The program covering other maintenance, preventive maintenance, and alterations;
• A chart or description of the CAMP organization;
• A list of persons with whom the CAMP organization has arranged for the performance of any of its required inspections;
• A list of persons with whom the CAMP organization has arranged for the performance of maintenance, preventive maintenance, or alterations; and
• A general description of arranged work.
4.1.1.2 The relevance and importance of this manual, as well as its outline and availability, is normally covered during indoctrination training. Every aspect of the CAMP is explained within this manual and the FAA expects it to be easily understood, easily accessed, and frequently referred to and used.
4.1.2 Course Subjects. It is through your CAMP Training Program that you ensure competent personnel (those who are fully informed about procedures, techniques, and new equipment in use) are provided to perform maintenance, preventive maintenance, and alterations. A competent person knows how to determine the adequacy of their work, and (if required) that the work of others is done in accordance with your procedures and they have a full understanding of their assigned duties and authority. They should fully understand their part in your overarching responsibility to ensure airworthiness. Your CAMP Training Program is your means to present, explain, and ensure the methods, techniques, and practices defined in your manual are understood. Those you employ, contract with, and authorize to perform maintenance (including inspection), preventive maintenance, and alterations must fully understand your manual procedures and techniques and fully understand that they must perform as your manual prescribes. The following is a list of suggested subjects that are reflective of the CAMP elements as explained in AC 120-16, Air Carrier Maintenance Programs:
1. The CAMP airworthiness responsibility.
2. The manual (in general):
a. Maintenance manuals.
b. Revising and availability.
c. The manual’s role.
d. Major sections of the manual, such as:
• Administrative policies and procedures.
• Instructions for the administration, management, and accomplishment of the CAMP.
• Technical data, standards, methods, techniques, and procedures.
• Work cards (e.g., job or task cards).
• Inclusion of contract maintenance policies, methods, techniques, procedures, and instructions.
3. The CAMP organization:
a. The CAMP organizational structure, to include company rules and policies.
b. Separation of required inspections from maintenance.
c. Director of Maintenance (DOM) roles and responsibilities.
d. Chief Inspector roles and responsibilities.
e. Management personnel.
f. Technical personnel.
4. Accomplishment and approval of maintenance and alterations:
a. Maintenance procedures (e.g., manuals, on-the-job training (OJT), or job aides,
such as YouTube or computer-based training (CBT)).
b. Airworthiness Directive (AD) management.
c. Major repairs and alterations.
d. Airworthiness Release Form or aircraft log entry and approval for return to
service.
e. Scope of maintenance:
• Scheduled maintenance, to include part airworthiness, tagging, and identification.
• Unscheduled maintenance:
o Minimum equipment list (MEL) methods, policies, and procedures.
o Logbook procedures.
• Specific maintenance requirements for major components:
o Engine program.
o Propeller program.
o Emergency evacuation systems.
• Off-wing parts and appliances maintenance program.
5. The maintenance schedule:
a. Time limitations or standards for determining time limitations.
b. The FAA’s role.
c. Maintenance schedule task organization and content.
d. Standards that determine maintenance schedules.
6. Required Inspection Items (RII):
a. The RII list.
b. The RII procedures standards and limits.
c. RII inspector certification, qualification, training, and authorization, to include a
list of authorized RII personnel.
7. The maintenance recordkeeping system:
a. The significance of making and keeping maintenance records as they relate to the
U.S. Standard Airworthiness Certificate.
b. Title 14 CFR part 43 requirements.
c. Interfacing with and meeting 14 CFR part 145 certificated repair stations’
requirements, as applicable.
d. Making and keeping required records within the recordkeeping system:
• Familiarity and use.
• Record locations.
• AD status.
e. Required records. This includes accounting for and retrieval (e.g., total time in
service, currents status of life-limited parts, time since last overhaul, current inspection status of aircraft, current status of ADs, current major alterations for the entire aircraft).
f. Maintenance log.
g. Airworthiness release.
h. Mechanical interruption reports.
i. Service Difficulty Reporting (SDR).
j. Reporting major repairs and alterations.
4.2.2 Although training is an important part of human factors, reducing… › 4.2.2.3 The FAA encourages voluntary safety reporting systems, such as…
8. Contract maintenance, to include scope and responsibility (see Chapter 5 for more information).
9. Continuing Analysis and Surveillance System (CASS):
a. Report a program deficiency to CASS.
b. Specific training for CASS auditors and analysts.
4.2 Maintenance Human Factors Training.
4.2.1 The objectives of human factors training are to improve safety, decrease personnel and organizational exposure to risk, and capture and reduce errors. An important aspect of accident decline is the reduction of human errors generated during the maintenance of aircraft. An understanding of human limitations improves an individual’s ability to recognize situations that can lead to errors.
4.2.2 Although training is an important part of human factors, reducing human errors requires more than just training. It requires a total error reduction program involving maintenance personnel and their senior managers.
4.2.2.1 An effective human factors training program begins at the highest level of an organization. This is where an organization:
1. Defines the environment in which individuals conduct their tasks;
2. Defines the policies and procedures individuals must follow;
3. Allocates the resources individuals need to achieve safety and meet production goals; and
4. Investigates system failures and takes remedial action to avoid repetition.
4.2.2.2 Human factors training will have a maximum impact only if it is reinforced by other related program elements and a supportive corporate culture. In addition, consistent follow-through over time is required to encourage maintenance personnel support and participation. To promote this, the CAMP organization should establish a clear, fair, and consistently applied discipline policy that encourages maintenance personnel to provide critical data about the factors that caused the error. To achieve this goal, design your human factors training program with policy and practices that do not punish maintenance personnel for unintentional errors. Your policy and practices should encourage immediate notification, open information sharing, and honest accountability with the intent being to identify what caused the error to occur. It is essential for the causal factors to be shared with the CASS and Safety Management Programs in order to identify possible systemic problems that have resulted from weak or incorrect training.
4.2.2.3 The FAA encourages voluntary safety reporting systems, such as the Aviation Safety Action Program (ASAP) and Voluntary Disclosure Reporting Program (VDRP). A good human factors program should incorporate ASAP as a means
for reporting otherwise missed safety events. The overall objective of the ASAP is to encourage voluntarily reporting of safety information that may be critical to identifying potential precursors to accidents. The FAA has determined that identifying these precursors is essential to further reducing the already-low accident rate. For further information on the ASAP, refer to AC 120-66, Aviation Safety Action Program.
4.2 Maintenance Human Factors Training. › 4.2.5 Where possible, relate human factors training to maintenance practices.
4.2.3 Human factors training should cover basic safety principles and practices as part of an organization’s safety management and quality systems. The training should ensure maintenance personnel carry out their work in a professional manner and aircraft are released into service in a safe and airworthy condition. The objectives of human factors training should be to:
• Improve safety;
• Decrease personnel and organizational exposure to risk;
• Capture and reduce errors; and
• Reduce the potential for incidents and accidents.
4.2.4 Human factors training objectives are achieved by:
• Imparting knowledge on human factors and safety;
• Identifying how the human factors training program works;
• Developing skills, where appropriate;
• Affecting people’s attitudes; and
• Affecting behavior.
4.2.5 Where possible, relate human factors training to maintenance practices. Give examples and scenarios. The following are suggested human factors elements for inclusion into the CAMP Training Program:
1. General/introduction to human factors;
2. Statistics;
3. Safety culture/organizational factors;
4. Contributing factors and human error;
5. Types of errors in maintenance tasks;
6. Human reliability;
7. Human performance and limitation;
8. Vision and hearing;
9. Stress and workload management;
10. Situational awareness;
11. Error investigating process;
Continue reading ↓ 120 of 194 passages shown