SAFO 17002 Improper Transponder and Automatic Dependent Surveillance-Broadcast (ADS-B) OUT Equipment Testing
Distributed by: Flight Standards
http://www.faa.gov/other_visit/aviation_industry/airline_operators/airline_safety/safo A SAFO contains important safety information and may include recommended action. Besides the specific action recommended in a SAFO, an alternative action may be as effective in addressing the safety issue named in the SAFO. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way. This document is intended only to provide clarity to the public regarding existing requirements under the law or agency policies. Subject: Improper Transponder and Automatic Dependent Surveillance-Broadcast (ADS-B) OUT Equipment Testing. Purpose: This SAFO informs personnel involved with ground testing of aircraft Air Traffic Control (ATC) transponders and ADS-B OUT equipment of the importance of adhering to proper test procedures and the hazards associated with improper testing. Background: The Federal Aviation Administration (FAA) has received reports of transponder and ADS- B OUT system ground test events in which information, including simulated altitude, was transmitted from the test aircraft and received by aircraft inflight. In at least one instance, an ADS-B OUT system ground test created a false airborne target that generated a Traffic Alert and Collison Avoidance System II (TCAS II) Resolution Advisory (RA) on a Boeing 737 aircraft on approach. Pilot reaction to this RA required unnecessary maneuvering in congested airspace and initiated ATC re-sequencing actions that affected multiple aircraft and negatively impacted operations in the area for about 30 minutes.
Discussion: Transponders and ADS-B OUT systems operating under test conditions transmit specific information about the aircraft, including position and altitude data. These tests frequently involve a check of the aircraft’s altimetry system in which air pressure is induced into the pitot static system to simulate operation at various altitudes. In cases where transmission lines are not attached directly to test equipment, antenna coupling should be used to prevent propagation of test signals with potential to interfere with ATC operations or TCAS and ADS-B In-equipped aircraft operating in the area. Recommended Action: The FAA recommends that repair stations and maintenance personnel performing transponder and ADS-B OUT system testing evaluate the adequacy of their procedures and test equipment and adhere to proper test procedures to prevent uninhibited system transmission that may affect ATC operations or airborne aircraft. The FAA also recommends that any time simulated altitude is induced, the transponder be placed in “standby” or turned off if effective antenna coupling and shielding are not available during altimetry testing, and to review relevant guidance contained in the latest revisions of:
• AC 43-6, Altitude Reporting Equipment and Transponder System Maintenance and Inspection Practices; and • AC 20-165, Airworthiness Approval of Automatic Dependent Surveillance - Broadcast OUT Systems. Contact: Questions or comments regarding this SAFO should be directed to the Aircraft Maintenance Division at (202) 267-1675.
SAFO
Safety Alert for Operators
U.S. Department of Transportation Federal Aviation Administration
SAFO 17002 Original Issue: 02/06/17 Revised:9/27/22
Flight Standards Service Washington, DC