Radar Vectors
FAA Order Current Issued Nov 1, 2023 AFS-1 60 pages Copy saved Nov 18, 2026

Order FS 8000.96A Flight Standards Service Guidance Document Development with Change 1

This order establishes policy and provides information on how the Flight Standards Service (FS) creates, reviews, publishes, evaluates, amends, and cancels directives and guidance documents. This information should be utilized as a foundation for all document production within FS. This order contains guidance that is pertinent to DOT Order 2100.6A, Rulemaking and Guidance Procedures, Office of Management and Budget (OMB) Bulletin No. 07-02, Agency Good Guidance Practices (GGP), and Executive Orders 12866, Regulatory Planning and Review, and 13563, Improving Regulation and Regulatory Review.

Official source ↗ Open PDF

Distribution: Electronic Only Initiated By: AFS-1

CHANGE

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

FS 8000.96A

CHG 1

National Policy Effective Date:

10/17/24

SUBJ: Flight Standards Service Guidance Document Development

1. Purpose of This Order. This order establishes policy and provides information on how the Flight Standards Service (FS) creates, reviews, publishes, evaluates, amends, and cancels directives and guidance documents. This information should be utilized as a foundation for all document production within FS. This order contains guidance that is pertinent to Department of Transportation (DOT) Order 2100.6, Rulemaking and Guidance Procedures; Office of Management and Budget (OMB) Bulletin No. 07-02, Final Bulletin for Agency Good Guidance Practices; and Executive Orders 12866, Regulatory Planning and Review, and 13563, Improving Regulation and Regulatory Review.

2. Audience. All FS employees who write or review policy and guidance documents.

3. Where You Can Find This Order. You can find this order on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices and the Dynamic Regulatory System (DRS) at https://drs.faa.gov. Operators and the public can find this order on the Federal Aviation Administration’s (FAA) website at https://www.faa.gov/regulations_policies/orders_no tices and DRS.

4. Explanation of Policy Changes. This change updates information in Chapter 3, subparagraph 4e(3)(f); adds a new Appendix F, Job Aid on Formatting of Source References; and updates references throughout the document to comply with Appendix F. Appendix F provides formatting information from multiple government documents in a single document and was added as a job aid to better support FS employees when referencing documents rather than conducting extensive research.

5. Disposition of Transmittal Paragraph. This change will remain in DRS until superseded by a revision to this order.

PAGE CHANGE CONTROL CHART

Remove Pages Dated Insert Pages Dated

Pages ii and iii 11/1/23 Pages ii and iii 10/17/24

Pages 1-1 and 1-4 11/1/23 Pages 1-1 and 1-4 10/17/24

Pages 2-2 thru 2-5 11/1/23 Pages 2-2 thru 2-5 10/17/24

Pages 3-1, 3-14, 3-17, 3-19, 3-21, and 3-23

11/1/23 Pages 3-1, 3-14, 3-17, 3-19, 3-21, and 3-23

10/17/24

Page 4-4 11/1/23 Page 4-4 10/17/24

Pages A-1 thru A-3 11/1/23 Pages A-1 thru A-3 10/17/24

Pages F-1 thru F-3 10/17/24

Robert M. Ruiz for Lawrence Fields Executive Director, Flight Standards Service

Distribution: Electronic Only Initiated By: AFS-1/AFB-1

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

National Policy

ORDER FS 8000.96A

Effective Date:

11/1/23

SUBJ: Flight Standards Service Guidance Document Development

This Federal Aviation Administration (FAA) Flight Standards Service (FS) order establishes the policy and guidelines for FS personnel who develop, update, or change FS policy and guidance documents, including directives and advisory circulars (AC).

ii

Table of Contents

Paragraph Page

Chapter 1. General Information … 1-1

1. Purpose of This Order … 1-1 2. Audience … 1-1 3. Where You Can Find This Order … 1-1 4. What This Order Cancels … 1-1 5. Effective Date and Duration … 1-1 6. Explanation of Policy Changes … 1-1 7. Background … 1-2 8. Significance of Effective Guidance … 1-3 9. Directive Feedback Information … 1-5

Chapter 2. Compliance Requirements of Guidance Documents … 2-1

1. Guidance Documents … 2-1 2. Must Be Based on Regulatory or Statutory Requirements … 2-1 3. Are Not Legally Binding to Regulated Entities … 2-2 4. Should Explain Changes in Compliance Methods … 2-2 5. Methods of Compliance Updates … 2-2 6. Statutory or Regulatory Reference Citation … 2-3

Chapter 3. Developing Effective Guidance … 3-1

1. General … 3-1 2. Determine Reasoning and Intent … 3-4 3. Planning … 3-10 4. Writing and Development … 3-16 5. Implementation … 3-20 6. Continuous Evaluation … 3-22

Chapter 4. Review and Clearance … 4-1

1. Importance of Stakeholder Review for New and Revised Guidance Documents … 4-1 2. Types of Informal and Formal Collaboration and Review … 4-1 3. Providing Meaningful Feedback as a Stakeholder … 4-3 4. Delays Caused by Reviewing Organizations … 4-4 5. Review of Comments … 4-4 6. Final Review and Approval … 4-4 7. Prepare and Publish Final Guidance … 4-5

Appendix A. Related Websites and Publications … A-1 Appendix B. Policy and Guidance Document Development Checklist … B-1 Appendix C. Guidance Document Development Flowchart … C-1 Appendix D. Decision-Making Guide … D-1 Appendix E. Choosing the Correct Non-Policy Document to Support Policy and Guidance

Documents Job Aid … E-1 Appendix F. Job Aid on Formatting of Source References … F-1

iii

List of Figures Figure Page 2-1. Example of Source Basis in Order 8900.1 … 2-5 3-1. The Policymaker’s Mindset and Foundational Knowledge … 3-1 3-2. Balancing Complexity and Implementability … 3-2 3-3. The Safety Continuums of the Policymaker’s Mindset … 3-3 3-4. The Policy and Guidance Document Life Cycle … 3-4 3-5. The Problem Pyramid … 3-5 3-6. Guidance Document Pyramid: A General Guideline for Determining the Type of Document … 3-7 3-7. A Policy and Guidance Document Includes Technical Content andNon-Technical Content to Be Effective … 3-16 3-8. Stages of the Writing and Editing Process … 3-20 3-9. The Change Process … 3-22

b. Chapter 1. › (2) Adds roles and responsibilities of primary stakeholders.

Chapter 1. General Information

1. Purpose of This Order. This order establishes policy and provides information on how the Flight Standards Service (FS) creates, reviews, publishes, evaluates, amends, and cancels directives and guidance documents. This information should be utilized as a foundation for all document production within FS. This order contains guidance that is pertinent to Department of Transportation (DOT) Order 2100.6, Rulemaking and Guidance Procedures; Office of Management and Budget (OMB) Bulletin No. 07-02, Final Bulletin for Agency Good Guidance Practices; and Executive Orders 12866, Regulatory Planning and Review, and 13563, Improving Regulation and Regulatory Review.

2. Audience. All FS employees who write or review policy and guidance documents.

3. Where You Can Find This Order. You can find this order on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices and the Dynamic Regulatory System (DRS) at https://drs.faa.gov. Operators and the public can find this order on the Federal Aviation Administration’s (FAA) website at https://www.faa.gov/regulations_policies/orders_no tices and DRS.

4. What This Order Cancels. This order cancels:

• FAA Order 8000.87A, Safety Alerts for Operators, dated October 24, 2006; • FAA Order 8000.91, Information for Operators (INFO), dated October 20, 2006; • FAA Order FS 8000.96, Flight Standards Service Guidance Document Development, dated January 7, 2016; and • FAA Order 8900.3, Flight Standards Service Document Control Board, dated March 2, 2012.

5. Effective Date and Duration. This guidance remains in effect from the date published until canceled by the Executive Director of Flight Standards Service (AFX-1).

6. Explanation of Policy Changes.

a. General.

(1) Deletes references to former FS organizational entities and outdated systems.

(2) Deletes references to canceled orders and outdated document control procedures.

(3) Expands scope to include all types of policy and guidance documents and good guidance development principles.

b. Chapter 1.

(1) General revisions.

(2) Adds roles and responsibilities of primary stakeholders.

7. Background. › b. 2012 Report and Recommendations. The ARC specifically cited the…

c. Chapter 2. General revisions.

d. Chapter 3. Adds sections on the policymaker’s mindset, safety continuums, document development life cycle, organizational intent, issue identification, selecting the correct type of guidance document, project management, critical thinking, mutual learning, integrated management, implementation, communication, change considerations, and document evaluation.

e. Chapter 4.

(1) General revisions.

(2) Adds document collaboration and coordination earlier in the review process.

(3) Adds a section on providing meaningful feedback as a stakeholder.

f. Chapter 5. Deleted and incorporated into Chapter 4.

g. Chapter 6. Deleted and incorporated into Chapter 3.

h. Chapter 7. Deleted and incorporated into Chapter 3.

i. Appendix A. Updated references for currency and applicability.

j. Appendix B. Updated based on changes to Chapter 3.

k. Appendix C. New appendix includes a document development and coordination flowchart.

l. Appendix D. New appendix includes a Decision-Making Guide.

m. Appendix E. New appendix includes a job aid on choosing the correct document to support policy and guidance documents.

7. Background. On February 14, 2012, the President signed Public Law (PL) 112-95, FAA Modernization and Reform Act of 2012 (FMRA).

a. Consistency of Regulatory Interpretation Aviation Rulemaking Committee (ARC). In response to Section 313 of FMRA, the FAA chartered the Consistency of Regulatory Interpretation ARC. The ARC created a forum for the U.S. aviation community to assess, determine the root causes of, and provide recommendations to reduce inconsistent interpretation and application of regulations.

b. 2012 Report and Recommendations. The ARC specifically cited the important role of guidance documents. In its 2012 report, the ARC recommended instructions for FAA personnel who develop policy. The intent of this recommendation was to ensure that new guidance does not contradict or otherwise negate a current acceptable method of compliance and that guidance documents (when not administrative in nature) are consistent with regulatory language. This order provides a standardized framework for authors of guidance documents.

b. External Guidance. External guidance is used when the FAA has a need… › (2) Handbooks.

c. Directives for Developing Effective Guidance. On January 18, 2011, Executive Order 13563 was issued, which supplements and affirms the requirements of Executive Order 12866, issued on September 30, 1993. Both Executive Orders state the principles and requirements to establish regulations, promote public participation, improve integration and innovation, increase flexibility, ensure scientific integrity, and increase analysis of existing regulations.

8. Significance of Effective Guidance. Well-designed and well-written guidance documents serve important and critical functions. They can channel the discretion of the FAA, increase efficiency, and enhance fairness by providing the public clear notice of the line between permissible and impermissible conduct. Three main types of documents exist to provide guidance and information to FAA personnel and industry.

a. Internal Guidance. These types of documents are commonly referred to as directives, since applicable FAA personnel must follow them. Directives are the primary means used by the FAA to issue, establish, and describe agency policies, organization, responsibilities, methods, and procedures. The primary audience for directives is internal stakeholders, including designees, delegated organizations, and organization unit members. The most common and frequently seen internal guidance documents include:

(1) Orders. Orders are permanent directives and stay in effect until canceled.

(2) Notices. Notices are temporary directives and expire one year from their effective date or have a cancelation date before one year. Notices are used to communicate information regarding critical matters requiring immediate action as well as issues of a temporary nature. You should not draft a notice to announce a permanent change.

(3) Miscellaneous Job Aids and Documents. This category of guidance includes various types of documents that exist outside the scope of FAA Order 1320.1, FAA Directives Management. However, FS personnel still rely on them to complete certain tasks. These documents include job aids, checklists, job task documents, technical information sharing, or other documents that support adherence to policy and standards.

b. External Guidance. External guidance is used when the FAA has a need to communicate with the public or industry members. Generally, external guidance does not have the force of law in the way regulations do; however, it can provide information on ways to comply with existing regulations. The most common and frequently seen external guidance documents include:

(1) Advisory Circulars (AC). ACs provide information on methods, procedures, and practices acceptable to the Administrator for complying with regulations. While ACs do not establish requirements, they can help to implement regulations because they provide standardized implementation methods. ACs may contain explanations of regulations, best practices, and other information useful to the aviation community. (Refer to FAA Order 1320.46, FAA Advisory Circular System.)

(2) Handbooks. Handbooks are large documents that provide comprehensive information on subject matter to pilots and industry.

8. Significance of Effective Guidance. › h. Office of Foundational Business. Foundational Business supports OSS,…

(3) Information for Operators (InFO). InFOs are short documents that range from one to three pages on average, which provide information to the industry on a wide variety of topics. For example, launch of new programs, operational issues that are not safety critical, reminders on due dates, etc.

(4) Safety Alert for Operators (SAFO). SAFOs are short documents that range from one to three pages on average, which provide safety critical information to industry.

c. Exemptions. An individual or entity may petition the FAA for relief from the requirements of a current regulation. The granting of an exemption is generally viewed as an alternative method of complying with a regulatory requirement. Exemptions are transmitted under Title 14 of the Code of Federal Regulations (14 CFR) part 11. A grant of exemption and its specific conditions and limitations is a regulatory requirement. Exemptions are only applicable to the petitioner, not to the broader public or industry.

d. Authorizing Documents. “Authorizing documents” is the collective term used for operations specifications (OpSpec), management specifications (MSpec), training specifications (TSpec), and Letters of Authorization (LOA) managed and issued in the automated Operations Safety System (OPSS). This also includes waivers and deviations. While 14 CFR regulates air operators and air agencies, the FAA issues authorizing documents to describe specific conditions and limitations to individual entities. The FAA uses authorizing documents to apply the conditions and limitations of 14 CFR to air operators and air agencies. Revisions to authorizing document templates must follow AFS 002-206, OPSS Template and Guidance Development. See Appendix A, Related Websites and Publications, for additional information.

e. Miscellaneous Guidance. Some documents published by FS do not neatly fit into the internal or external category. Some document types serve as a knowledge base for both FAA personnel and industry. This includes documents such as manuals, guides, waivers, and plans.

f. Roles and Responsibilities. Drafting, processing, publishing, and the management of a policy and guidance document throughout its life cycle requires the coordination and collaboration of multiple offices. Regardless of these described roles, it is a collective responsibility of all offices to communicate issues, adhere to due dates, elevate concerns, and be responsive to inquiries. The general roles and responsibilities are as follows:

g. Office of Safety Standards (OSS). OSS develops, drafts, implements, and tracks regulations, guidance, and directives, with ultimate responsibility for a document’s content. Since aviation safety trends often affect policy, OSS works collaboratively and interdependently with other FS offices, divisions, and internal and external stakeholders to identify and create awareness of those trends in relation to guidance document development. OSS also plays a leading role in the formal and informal document review and evaluation process in which divisions or offices work collaboratively to ensure consistency, effectiveness, and implementability.

h. Office of Foundational Business. Foundational Business supports OSS, as it manages the formal processes and publication of most of the document types listed above, in accordance with Federal, DOT, FAA, and FS publication policies. Foundational Business drafts, formats,

edits, and manages internal/external stakeholder coordination in support of the document development process. They prepare the final document for publication in the applicable FS repository and for directives project-related case folder management. Foundational Business also manages feedback routing and forms management.

Chapter 1. General Information › 9. Directive Feedback Information.

i. Office of Air Carrier Safety Assurance (ACSA) and Office of General Aviation Safety Assurance (GASA). ACSA and GASA are the end users of many policy documents. They ensure consistency and standardization in how to apply oversight activities. They also collaborate with OSS to provide technical expertise and comments on policy. These offices play an important role during policy development to promote successful implementation and desired outcomes.

j. Office of the Chief Counsel (AGC). The Regulations Division (AGC-200) provides a broad range of legal counsel to OSS on a variety of matters that include drafting and ensuring the legality of regulations, orders, exemptions, guidance, ACs, obstruction evaluation determinations, and space transportation licenses and permits. AGC-200 reviews for legal sufficiency, which includes structure, clarity, and focus of the document. This office also issues legal interpretations of aviation regulations for OSS and others and acts as a liaison with the Office of the Secretary of Transportation (OST) on the legal aspects of the agency’s regulatory programs.

k. Office of Rulemaking (ARM). ARM provides general rulemaking information and manages the agency’s rulemaking program and processes, Aviation Rulemaking Advisory Committee (ARAC) program, international rulemaking cooperation, and the exemption process.

9. Directive Feedback Information. FAA Form 1320-19, Directive Feedback Information, is the last page of this order. Note any deficiencies found, clarifications needed, or suggested improvements regarding the contents of this order on FAA Form 1320-19.

Chapter 2. Compliance Requirements of Guidance Documents

2. Must Be Based on Regulatory or Statutory Requirements. › b. Must Conform to Regulatory Requirements. In some cases, a regulatory…

1. Guidance Documents. FS recognizes the value of guidance documents in providing predictability, stability, and consistency to internal and external stakeholders. Because of this, it is important that FS uses effective guidance practices when we draft or revise these documents.

a. Clear Guidance. A positive safety culture begins with clear and unequivocal guidance documents. The safety policy outlined in guidance documents describes the methods and procedures that an organization can use to achieve desired safety outcomes. An important aspect of safety management is to revisit effectiveness of guidance documents and determine whether they produce the desired outcome. Effective guidance documents promote safety policy and result in increased regulatory compliance.

Note: Some orders and content are administrative in nature and not based on regulatory or statutory requirements. The best practices for effective guidance typically do not apply to administrative documents or administrative sections/paragraphs of guidance documents. An example of an administrative document is FAA Order FS 1100.1, Flight Standards Service Organizational Handbook.

b. Public Comment. Generally, the FAA is not required to publish guidance documents for public notice and comment. It can be beneficial, however, when the agencies determine public feedback could help improve compliance. Preadoption notice and comment can be most helpful for guidance documents that are particularly complex, novel, consequential, or controversial. Offices in FS are also encouraged to consider observing notice and comment procedures for guidance documents that effectively would extend the scope of the jurisdiction the FAA will exercise, alter the obligations or liabilities of private parties, or modify the terms under which the FAA will grant entitlements. In those rare circumstances in which a guidance document would result in an annual effect of $100 million or more on the economy, the FAA must publish a notice in the Federal Register (FR) announcing that the draft guidance document is available for comment. If you think your guidance document could meet this threshold, you should consult with AGC to identify next steps.

2. Must Be Based on Regulatory or Statutory Requirements. Guidance cannot create or change regulatory or statutory requirements.

a. Cannot Create New Regulatory Requirements. Regulatory requirements can only be created through rulemaking, which generally includes public notice and comment on the FAA’s proposed regulations. For example, if certain recordkeeping requirements are established by a regulation, guidance documents can provide options and effective practices for computerized recordkeeping but must not direct certificate holders (CH) to keep new or different records. This new requirement could only occur through rulemaking.

b. Must Conform to Regulatory Requirements. In some cases, a regulatory requirement stays the same, but over the years, the guidance regarding that regulatory requirement is created, updated, and changed to address innovations in technology, changes in the operating environment, or what we have learned from accident investigations. There is value in updating

5. Methods of Compliance Updates. › a. Example 1. A change to a statute that is the underlying basis for…

guidance to reflect the current aviation environment and to respond to public questions about how to apply legacy requirements to emerging technology. The newly updated guidance must continue to conform to the regulatory requirements. However, it cannot “drift” from the baseline regulatory requirements to the point that the updated guidance, in effect, creates new regulatory requirements. As previously noted, new or amended requirements can only occur through rulemaking or statutory amendments. For example, certain regulations allow participation in voluntary safety programs. Guidance documents could identify how to participate in these voluntary safety programs but could not require CHs to participate.

3. Are Not Legally Binding to Regulated Entities. Although guidance documents include a connection and reference to the regulations, guidance documents are just that: guidance. As a standalone, these documents are not legally binding. A full discussion of the non-legally binding nature of guidance is contained in OMB Bulletin No. 07-02, published January 25, 2007 (72 FR 3432).

4. Should Explain Changes in Compliance Methods. The FAA may create or update guidance to increase safety value, address changes in the operating environment, or incorporate what we have learned from accident investigations. In some circumstances, guidance changes may invalidate certain methods of compliance contained in previously issued guidance. It is important to provide a rationale for a change in acceptable compliance methods to provide transparency for all stakeholders. These explanations can be brief but, at a minimum, should include what has changed and why so readers clearly understand why the previous method of compliance is no longer valid. Include the rationale for changes made to compliance methods as follows:

• FAA Order 8900.1: In the Executive Summary Form (ESF). Portions of the information from the ESF are available in the Summary of Changes in Order 8900.1, Flight Standards Information Management System. • Orders (other than 8900.1): In the Explanation of Policy Changes paragraph. • ACs: In the Purpose of This Advisory Circular (AC) paragraph. • Notices: In the Purpose of This Notice paragraph.

Note: Updates to all guidance documents require an ESF (refer to AFS 002-103, Policy and Guidance Document Production).

5. Methods of Compliance Updates. Methods of compliance can be updated when guidance is no longer in compliance with a statute or when new or updated guidance invalidates previously issued guidance. Examples of these methods follows:

a. Example 1. A change to a statute that is the underlying basis for certain regulations or guidance may invalidate previously issued guidance. For example, on December 13, 2007, PL 110-135, Fair Treatment for Experienced Pilots Act, amended Title 49 of the United States Code (49 U.S.C.) by adding § 44729. Along with raising the upper age limit for pilots to 65, 49 U.S.C. § 44729 specified that a pilot who has attained 60 years of age may serve as pilot in command (PIC) in certain international operations only if there is another pilot in the flight deck crew who has not yet attained 60 years of age. Title 49 U.S.C. § 44729 also stated that this crew pairing requirement would sunset on the date that the International Civil Aviation Organization

6. Statutory or Regulatory Reference Citation. › a. Citations in ACs. To remain focused on the underlying regulatory or…

(ICAO) removed a similar pilot pairing limitation in ICAO Annex 1, Personnel Licensing, Standard 2.1.10. On November 13, 2014, ICAO removed the pilot pairing limitation from their Standards and, as a result, the statutory basis for the FAA crew pairing requirement no longer existed. The FAA immediately issued revised guidance stating that the FAA would no longer enforce the crew pairing requirements.

b. Example 2. In some cases, guidance is issued on the basis of a statutory requirement with no associated FAA regulations. For example, in the fall of 2003, Congress established a flight attendant (F/A) certification requirement in PL 108-176, Vision 100—Century of Aviation Reauthorization Act. The act required that after December 11, 2004, no person may serve as a F/A aboard an aircraft of an air carrier unless that person holds a certificate, which FS identifies as a Certificate of Demonstrated Proficiency, issued by the FAA. In response, the FAA did not create new regulations but addressed the statutory requirement via FS guidance documents. If there is an amendment to the underlying statute on which the FS guidance documents regarding a Flight Attendant Certificate of Demonstrated Proficiency are based, then FS could issue revised guidance, superseding previously issued guidance. It is important to note that, for this situation, the FAA did not create a new FAA regulation nor did they establish a regulation through agency guidance, as the FAA does not have this authority. The agency used guidance documents to help stakeholders understand how to comply with the statute.

c. Example 3. The FAA continually reviews and updates the standard average passenger weights listed in AC 120-27, Aircraft Weight and Balance Control, after the release of new National Health and Nutrition Examination Surveys (NHANES). This survey is facilitated by the Centers for Disease Control and Prevention (CDC) and is designed to assess the health and nutritional status of adults and children in the United States. If the FAA finds that the data from NHANES indicates a weight change of more than 2 percent, the FAA updates this AC to include the new standard average weights. This supersedes the previously issued guidance regarding standard average passenger weight because that data no longer supports a finding of compliance with the regulatory requirements regarding Weight and Balance (W&B).

6. Statutory or Regulatory Reference Citation. Guidance documents must include the citation to the governing statutory provision or regulation (in Code of Federal Regulations (CFR) format, as presented in Appendix F, Job Aid on Formatting of Source References) that it applies to or interprets. Additionally, external guidance documents cannot use mandatory language such as “shall,” “must,” “required,” or “requirement” unless intended to describe a statutory or regulatory requirement.

Note: To the extent possible, statutory and regulatory references should be cited at the beginning of a guidance document, and the Office of Primary Responsibility (OPR) (FS policy division) should minimize redundant citation of statutory and regulatory references. The OPR should use its best judgement on when repeated citation of statutory or regulatory references is appropriate.

a. Citations in ACs. To remain focused on the underlying regulatory or statutory basis that guidance documents support and to assist automated search functions, FS will include regulatory or statutory citations in guidance documents. This requirement already exists for ACs. As outlined in Order 1320.46, ACs must cite the regulatory requirement that the AC is supporting in

6. Statutory or Regulatory Reference Citation. › Source Basis: Title 49 U.S.C. § 44728, Flight Attendant Certification.

the Purpose paragraph. With this order, FS is extending this requirement to all directives, including Order 8900.1.

b. Citations in Notices and Orders. For notices and orders other than Order 8900.1, include a specific reference to the regulatory or statutory citation the directive supports in the Purpose paragraph. The last sentence of the Purpose paragraph should contain the regulatory or statutory citation. For example, “This notice contains guidance that is pertinent to 14 CFR § 91.313,” “This order contains guidance that is administrative in nature,” or “This order contains guidance that is pertinent to 49 U.S.C. § 44702.”

c. Citations in Order 8900.1. For updates or draft sections of Order 8900.1, include the regulatory or statutory citation in a new paragraph directly under the section header. Title the paragraph, “Source Basis,” then include the regulatory or statutory citations or the word “Administrative.” For example:

Source Basis:

• Title 14 CFR § 61.55, Second-in-Command Qualifications. • Title 14 CFR § 61.153, Eligibility Requirements: General. • Title 14 CFR § 61.155, Aeronautical Knowledge. • Title 14 CFR § 61.157, Flight Proficiency. • Title 14 CFR § 61.159, Aeronautical Experience: Airplane Category Rating.

Source Basis: Appendix A to 14 CFR Part 121, First Aid Kits and Emergency Medical Kits.

Source Basis: Special Federal Aviation Regulation (SFAR) 106, Rules for Use of Portable Oxygen Concentrator Systems On Board Aircraft.

Source Basis: Administrative.

Source Basis: Title 49 U.S.C. § 44728, Flight Attendant Certification.

Note: The source basis may contain regulatory citations, statutory citations, and the word “Administrative”; in this case, include all, if applicable. If there are multiple regulatory or statutory citations, put them in a bulleted list. The source basis may include multiple regulatory or statutory sections. Be sure to list each section and not just the applicable subpart. In the case where the source basis is in one of the appendices of a part, list the applicable appendix. (See Figure 2-1, Example of Source Basis in Order 8900.1.)

Figure 2-1. Example of Source Basis in Order 8900.1

Note: The trigger to add the regulatory, statutory, and/or administrative citation is basis for the creation or change of an order. For Order 8900.1, provide the correct source basis for the entire section when you update the section or a paragraph within the section (excluding editorial updates).

Figure 2-1: picture of page 15Figure 2-1 · page 15
Picture of the page from the copy saved here

b. Policymaker’s Mindset. The policymaker should ensure they maintain a… › (1) Integrity.

Chapter 3. Developing Effective Guidance

1. General. Guidance documents should have clear intent. The content should be based on thorough and accurate research and be consistent with existing regulations and policies and reflect FS principles of consistency, interdependence, and critical thinking. They should adhere to integrated risk management, which includes safety management, enterprise risk management, and quality management. Guidance developed without these critical attributes can lead to inconsistency and a product that is not sufficient toward achieving desired outcomes.

a. Foundational Knowledge. There is foundational knowledge that every FS policymaker should have before initiating policy and guidance document development projects. In addition to this order, there are agency and other Federal guidance documents on required and best practices (see Appendix A). A series of agency-supported rulemaking and regulatory courses provides general knowledge. A strong understanding of the FAA’s and FS’s mission, vision, values, strategic initiatives, programs like the Compliance Program, and interdependence with stakeholders are essential. OMB Bulletin No. 07-02 establishes general policies and procedures for guidance development and issuance. Good Guidance Practices (GGP) ensure that Executive Branch departments and agencies develop and issue guidance documents with appropriate review and public participation that are accessible and transparent to the public, are of high quality, and are not improperly treated as legally binding requirements. Beyond this knowledge, the policymaker should also have the right mindset (see Figure 3-1).

Figure 3-1: picture of page 16Figure 3-1 · page 16
Picture of the page from the copy saved here

Figure 3-1. The Policymaker’s Mindset and Foundational Knowledge

b. Policymaker’s Mindset. The policymaker should ensure they maintain a high-level of integrity and consider the safety continuum as they develop policy and guidance documents.

(1) Integrity. FS employees who develop policy, guidance, and standards are expected to think and act with integrity. They should have a certain mindset and behaviors when approaching this work. Integrity within policymaking work is defined by being:

(b) Complexity vs. › 2. There should also be a balance on how much rigor is applied during…

• Stakeholder-focused: The policymaker should put the interests of the stakeholder and safety above any personal interests. • Unprejudiced: The policymaker should be aware of any biases or preferences and not let these influence any discussions or decisions. • Open-minded: The policymaker should be open to see all aspects of the situation regardless of any negative aspects that may exist. • Humble and respectful: The policymaker should have an attitude that is open, receptive, and respectful to all interested parties, policy solutions, and potential outcomes.

(2) The Safety Continuum. The policymaker should be aware of choices that need to be made to balance critical and opposing principles of policy development. As choices are made to balance these continuums, the policymaker may need to forfeit the benefits from one end of a continuum so that the policy can gain the benefits from its opposing principle. (See Figure 3-3, The Safety Continuums of the Policymaker’s Mindset.) Early engagement and collaboration with stakeholders support achieving the right level of balance between these continuums.

(a) Consistency vs. Flexibility. The policymaker should weigh the balance between consistency and flexibility for each policy issue. While consistency is important, it can interfere with flexibility. This is important in guidance development as it can reduce rigidity of a policy. The policymaker should analyze each policy issue to ensure that flexibility is appropriately balanced with complexity and safety measures.

Figure 3-3: picture of page 18Figure 3-3 · page 18
Picture of the page from the copy saved here

(b) Complexity vs. Implementability. Aviation safety issues are complex and often require complex and rigorous solutions. Flexibility can also contribute to complexity. However, policymakers can balance complexity and rigor with assumptions concerning understandability, implementability, and affordability. Too little complexity and we might not achieve the safety precautions and standards needed to reach desired outcomes. Too much and the end user may not understand it or may not be able to manage or implement it (see Figure 3-2).

Figure 3-2. Balancing Complexity and Implementability

1. As complexity is incorporated into a policy solution, it should be proportionate with the type of operation or system. Too much could introduce potential barriers, such as with costs or resources, thus making those desired outcomes less likely to be actualized.

2. There should also be a balance on how much rigor is applied during different components of a policy solution (i.e., during a specific step of a process or on a specific actor in the process).

Figure 3-2: picture of page 17Figure 3-2 · page 17
Picture of the page from the copy saved here

(2) The Safety Continuum. › (d) Risk Averse vs.

3. Implementability may not always affect a technical area, but it may affect an administrative one. Policymakers should be aware of changes that might overburden an organization in complying with administrative changes.

4. Balance a policy’s complexity with consistency and agility to address differing needs and abilities of stakeholders. For example, you may place a more structured oversight regiment or stricture requirements on a larger-scale operation than you would a smaller-scale operator.

(c) Prescriptive vs. Descriptive. There is also a prescriptive/descriptive consideration. A prescriptive policy, like a prescription, is exacting and specific. Descriptive guidance is explanatory, which focuses on outcomes and performance. Depending on the issue, greater specificity may be required, or there may be a stronger need for performance-based policies. The Compliance Program is an example of a performance-based policy focused on supporting operators to achieve compliance without dictating the exact method of compliance. As another example, policy could prescriptively dictate what specific job classifications can perform the defined work activity; however, performance-based policy enables flexibility in determining the strategy to achieve compliance, and allowing the job classifications that perform the work to be descriptive in policy would enable the office to have greater flexibility to accomplish the task.

(d) Risk Averse vs. Risk Tolerant. As the policymaker balances consistency with flexibility, complexity with implementability, and prescription with description, there is a final balance between the level of risk tolerance and risk aversion. The choices made on risk tolerance are often related to operational risk. For example, the accident rate for General Aviation (GA) operations is much higher than that for air carrier operations, yet the FAA cannot produce guidance that drives GA to an equivalent level of safety (ELOS) and is more risk tolerant in GA operations. Be aware that not all risk relates to aviation safety. There is also risk in procedural, administrative, political, and other areas.

Figure 3-3. The Safety Continuums of the Policymaker’s Mindset

Chapter 3. Developing Effective Guidance › 2. Determine Reasoning and Intent.

(3) The Policy and Guidance Document Project Life Cycle. Developing guidance documents is more than writing. There is a continuous process of how to identify issues, research, plan, write, implement, and evaluate (see Figure 3-4). This chapter is structured to present policy and guidance development at each step in this life cycle. The process starts with how to define the issue and establish organizational intent. This allows the next step of planning and decision-making to occur more collaboratively, which creates a solid foundation for the writing. Once a document is written, policymakers plan for document implementation. Consider appropriate and effective communications and implementation strategies that consider change principles. Finally, the document should undergo continuous evaluation to determine if the document will fulfill its intent, address the identified issue, and achieve the defined success. The document development process is grounded in collaboration and interdependence. While not all projects will require formal project teams, there will always be multiple stakeholders and organizations involved in a document project’s life cycle.

Figure 3-4: picture of page 19Figure 3-4 · page 19
Picture of the page from the copy saved here

Figure 3-4. The Policy and Guidance Document Life Cycle

2. Determine Reasoning and Intent. It is human nature to desire immediate solutions. However, rushing to implement a solution to a problem could result in overlooking critical steps in the guidance development process, which may impair implementation of a policy or program. The policy and guidance development process starts as you determine the reason and intent, which also includes that you define the issue, determine the audience, select the appropriate document type, and conduct research (see Figure 3-5, The Problem Pyramid).

Figure 3-5: picture of page 20Figure 3-5 · page 20
Picture of the page from the copy saved here

a. Identify the Issue and Purpose. › (2) Identify the System.

Figure 3-5. The Problem Pyramid

a. Identify the Issue and Purpose.

(1) Identify the Issue.

(a) An issue is often intermixed with other challenges, so identifying the specific issue and its root cause is essential to solving the correct issue. As you identify the issue, start to consider the unmet need, value, or practice. However, the issue is not just stating what is needed, as that addresses a solution. The issue looks at a gap, failing, or malfunctioning part of a system that fails to bring desired outcomes. As an example, the issue is not an ineffective form, but that the form is consistently submitted with inappropriate information.

(b) Considering why this issue exists is important and can provide information for how to define success when you implement the new or revised policy or program. Determine the consequences if this issue is not resolved. You may need to evaluate how this issue was initiated, either through another organization or through a formal recommendation procedure. You may need to bring in others to help define this issue. Once formulated, a well-structured issue is specific enough to create potential solutions with measurable outcomes but not so broad that it generates unlimited solutions.

(2) Identify the System. During this initial step of identifying the issue, it is important to identify the affected system. Analyzing the issue from a systemic perspective will help in identifying root causes, dependencies, interdependencies, and desirable and unwanted outcomes. This system could include an organization, program, procedure, operation, work instruction, or any other type of operation that works together to achieve a designated outcome. When

2. Determine Reasoning and Intent. › b. Identify Your Audience and Choose the Correct Guidance Document. As…

policymakers identify the affected system, it ensures we look at all aspects of the issue as we define it and identify root causes. System identification can also support later steps in the policymaking process, specifically when the document reaches formal coordination and implementation.

(3) Identify the Root Causes. When you transition to determine the root cause of the issue, a simple process is to keep asking “but why?” to each potential cause. This will allow you to look deeper at the issue in order to determine its root cause rather than stopping at higher-level causes or symptoms. When you consider these different levels of causes, you focus on how and why something happened, not who was responsible. When you look at the entire system, it allows you to consider all aspects of the issue: the purpose, methods, processes, connected programs, tools, physical evidence, performance measures, resources, environment, and skills involved. Leverage quantitative or qualitative data or reports to support this analysis. Determine if there was a triggering event, like a congressional or National Transportation Safety Board (NTSB) recommendation, which could provide data in this area.

(4) Establish the Case for Change. Another consideration is to ensure there is a case for change for the issue. As you define the consequences of not resolving an issue, you may find there is not a significant case to make changes within the system. This could signal that there may not be a need for a policy or program change, or that you have defined the issue or root cause inaccurately, and you may need to revisit that step.

(5) Create the Problem Statement.

(a) Once you identify the issue, system, root causes, and consequences, establish a concise problem statement that provides a means for you to communicate the issue to others quickly. You can also use this as a problem statement for other processes, such as obtaining leadership approvals or funding or communicating to stakeholders. When you create the problem statement, you finalize the step of how to determine reasoning and intent for the policy and guidance document.

(b) The problem statement should only include facts, not speculations, assumptions, or opinions. There is a consistent and logical flow to the problem statement to build your case: a statement of the issue, the negative outcome of the issue, a statement of the root causes, and an ending about reasons to address the issue. This sample problem statement provides a logical flow from the issue, to its causes, to the final impact statement.

(c) Example: “The Project form is consistently submitted with inappropriate information. This has led to delays in how we process forms and implement The Project. Analysis of form data and stakeholder interviews revealed that stakeholders have a widespread misunderstanding of how to use the form. It is critical to address this issue so that organizational resources are not wasted on correcting a form that appears to be effective if used correctly and so the safety goals of The Project are actualized.”

b. Identify Your Audience and Choose the Correct Guidance Document. As you move up the problem pyramid, you next identify your audience and select the type of guidance document for your purpose and audience.

(1) Who is the audience for the guidance document? It is important to keep the reader in mind when you develop the guidance document. Readers may include a broad range of internal and external stakeholders or a smaller subset of stakeholders. As you look at the system(s) you identified, it can provide insight into groups that may be affected by the guidance document, which can help define the audience. You may identify more than one audience and it may be necessary to write more than one policy and guidance document to ensure all stakeholders have the information they need on this issue.

b. Identify Your Audience and Choose the Correct Guidance Document. As… › (3) Looking again at Figure 3-6, the types of policy and guidance…

Note: Figure 3-6 depicts many of the types of policy and guidance documents that we develop. On the left side of the pyramid are documents for internal agency guidance and for oversight. On the right side are document types for external stakeholders to support compliance. This is a general structure only, as specific guidance documents can serve both oversight and compliance purposes and can be detailed but be based in agency authority (i.e., exemptions).

Figure 3-6: picture of page 22Figure 3-6 · page 22
Picture of the page from the copy saved here

(2) What is the goal of the guidance document? As you determine the goal of the document, you can begin to select the appropriate document type. Depending on the specific case, the document may serve to exercise regulatory authority, be based on a statute or rule, or be directive in nature. The document might not be regulatory, but the agency has a responsibility to provide guidance or information with a goal to ensure continuous safety, implement a risk control, or issue an exemption. Or you may only want to impart influence and guide others on how to gain the greatest benefit from a program, provide education and outreach on a specific identified hazard, or issue a job aid or work instruction on a standardized process.

Figure 3-6. Guidance Document Pyramid: A General Guideline for Determining the Type

of Document

(3) Looking again at Figure 3-6, the types of policy and guidance documents at the top of the pyramid are higher-level with specificity that increases as we descend through the types of

c. Do Your Research. Conduct an exhaustive search into the subject, for… › (3) Related Guidance Documents.

documents. Generally, the types of documents that are broader in scope are often based more on regulatory authority. Generally, as a document becomes more detailed, it is based less on authority and more on a responsibility or a need to influence. Appendix E includes a job aid to assist in selecting the correct type of document to use in supporting policies and guidance.

(4) What is the needed duration of the document? Consider if the document needs to be temporary or permanent when you select the appropriate document type. Some documents, such as notices, have specific time limits.

(5) How soon does the document need to be published? It is also important to consider time aspects related to the document’s publication. Are there specific dates required for the document’s publication? Is there an urgency to disseminate this information? Do you need to time the document’s publication with the publication of other documents or with the actions of another organization?

Note: Informal documents, like educational materials or public information, could be issued with greater urgency but would lack permanence and authority. You may need to exercise greater collaboration and detailed coordination if the exact publication timing coincides with other events or activities. These factors can affect the type of document selected.

(6) What types of documents are needed? You can find a description of the different types, purposes, and limitations of guidance documents in Chapter 1, paragraph 8.

c. Do Your Research. Conduct an exhaustive search into the subject, for not only regulatory and guidance documents but also other documents on your subject. This can provide relevant information not obtained through existing regulations. As you conduct essential research at this stage, it is also vital to be mindful as the document development progresses; you may need to conduct additional research as new information emerges or as you find gaps.

(1) Determine Regulatory Authority. Consider the regulatory requirements stated in Chapter 2 and determine if existing regulations control or limit the identified issue.

(2) Identify Regulations. As you develop the guidance, ensure it does not conflict with other guidance and conforms to the regulations. Review the relevant regulations as well as regulatory history. Include the preambles from the Notice of Proposed Rulemaking (NPRM) as well as the Final Rule. Include relevant FAA legal interpretations in the review.

(3) Related Guidance Documents. Review the relevant guidance and reference documents. Be aware of and consider the interfaces between all FAA guidance and other documents that address a certain issue as well as the need for a consistent FAA message. For example, if your tasking is to update a section of Order 8900.1, you should also review Order 8900.1 in general for other references to the topic to ensure consistency throughout the order. You should also review all other FAA documents on the topic to ensure there are no contradictions between the materials. For example, AC 39-9, Airworthiness Directives Management Process, and several sections in Order 8900.1, Volume 3, Chapter 59, Airworthiness Directive Management Process and Alternative Method of Compliance, cover the same topic and process. As a result, if you change one document, you may need to change other

2. Determine Reasoning and Intent. › d. Finalize Reasoning and Intent. The culmination of this first phase…

documents. When drafting ACs and directives on the same topic, it is imperative that the documents do not conflict.

(4) Other Associated Documents. Research should not be limited to FAA guidance and policy documents but should also explore research and papers by academic and professional organizations, organizational reports, communications by FAA and external organizations, and even similar guidance documents by other government agencies. Exhausting the literature on your topic can provide a breadth and depth of knowledge to generate potential solutions, conduct risk analyses, and select an optimal solution.

(5) Identify Interdependencies and Collaborate. Do not assume that the formal FAA coordination process provides the same kind of information as when you reach out directly to stakeholders and subject matter experts (SME) during the initial drafting and research process. Interdependencies typically involve multiple entities that have commonalities and interests in the identified issue. As you evaluate the system, consider other projects and work that may have an impact on, or be affected by, your specific issue. If the issue relates to a formal recommendation or other triggering event, this may help you identify interdependencies.

(a) Once you identify the interdependencies, network and reach out to the organizations to collaborate with them to plan, develop, and implement your policy and guidance document. Acknowledge that not all potential partners may not be located within FS. SMEs from other lines of business and other agencies may need to be involved. You should also consider external organizations, including industry, political, and professional organizations. Depending on the issue, look beyond any existing relationships you may have to ensure optimal representation, not just familiar organizations.

(b) Acknowledge that not all interdependencies are affected in the same way. Stakeholders may need to engage in different ways. Some may need awareness and information only; others may need to be fully engaged in the document’s development. You may need to find alternative ways to engage different stakeholders to meet their interests as you remain focused on the purpose of the project.

(6) Determine Dependencies and Relationships.

(a) Dependencies are different from interdependencies. Where interdependencies bring interested parties to work together, dependencies are more one-sided. A dependency can be an actor, project, or other work the issue may rely on. Without the execution or success of a dependency, you may not be able to move forward or implement the guidance. For example, another office in FS or the agency may be developing another policy development or program that needs to be implemented before this document can be published.

(b) Once you identify dependencies, determine their relationship to and impact on the issue. Like interdependencies, network to get stakeholders for these dependencies involved in the issue. Their involvement will provide critical information as you plan and develop the policy and guidance document.

d. Finalize Reasoning and Intent. The culmination of this first phase formally documents the issue, problem statement, interdependencies, dependencies, resources, stakeholders, and

(1) Gathering the Team. › (c) Again, depending on the issue and the level and type of change, you…

organizational intent. You may need to include a scope to address limitations. It is important that this documentation does not include any solutions. This disregards systems thinking and an integrated management approach, which may possibly exclude more optimal solutions. It also bypasses interdependence, critical thinking, and accountability.

e. Project Initiation Form (PIF). Submitting a PIF is the first step in formally starting the production process in FS. The PIF compiles the reasoning and intent information in a standardized format. The completed PIF will populate other tracking systems and share across the Service that a new policy or guidance project has been initiated. See Appendix A for the Quality Management System (QMS) and Business Processes list. (Refer to AFS 002-103.)

Note: If the document is one that does not need to go through the formal document review process, this form can provide a consistent template for documenting the reasoning and intent for the issue.

3. Planning. After you finalize the organizational reasoning and intent for the issue, you can start to plan the document. Apply project management strategies to ensure effective organization and oversight of stakeholders, communications, and administration. Use integrated management and critical thinking skills as you generate, analyze, and select an optimal policy solution. This phase culminates in the development of a well-structured outline or plan to support the writing phase of the document.

a. Project Management. Developing a policy and guidance document is complex and requires strong project management principles for its planning and development.

(1) Gathering the Team. Earlier in your research, you identified interdependencies and dependencies for the document. Use this information to create a list of stakeholders to involve as you develop the document.

(a) Depending on the subject, you may have a long list of potential stakeholders that could be part of the team. Too many team members and the document may not be able to progress nor achieve consensus. Too few and the document may not have sufficient input to ensure it will meet stakeholders’ needs or even be viable for a successful implementation. If your list of potential stakeholders is quite long, you may need to analyze what representatives would best serve this effort. You may need to leverage single team members to represent more than one interest area. You could consider a smaller working team but with a larger advisory team to ensure you represent all interests. Teams may look different for different projects and policy issues.

(b) Depending on the identified issue, you may want to consider coordination with the Safety Risk Management Division (AFB-400). If the issue may generate solutions that have a direct impact on aviation operations or the National Airspace System (NAS), or may bring any organizational changes, risk analyses may be necessary. The earlier in the process you obtain AFB-400’s involvement, the sooner it may assist you as you propose or select policy solutions.

(c) Again, depending on the issue and the level and type of change, you may want to consider inclusion of the Learning Solutions Branch (AFB-540) on the project team. This office provides project management and instructional systems design expertise to collaboratively

(b) Develop a Work Plan and Schedule. › 1. Establish a breakdown of tasks involved to develop, write, and…

develop learning strategies and solutions to meet FS training and development needs. While not all policy and guidance documents require training, if there is uncertainty of a training need, the inclusion of AFB-540 will only help to make the implementation phase more efficient.

(d) During this time, consider and determine if you need to notify the union before you make any policy decisions. As you evaluate this early in the process, you should consider the scope of the issue and if it is at a level of complexity that may need early union involvement. You can also consider the degree of change that may occur with the publication of the document. Depending on the team representatives identified, this may also warrant formal union notification. You may need to involve your organization’s leadership in this decision and process.

(e) Once you select your team, apply mutual learning principles, which lead to effective collaboration by doing the following:

• Create an environment where team members feel safe to state their views; • Share all relevant information on the policy issue; • Ensure all team members receive equal time to communicate interests and ideas; • Be compassionate to help deter judgment and allow all information to be shared; • Be curious and ask probing and explanatory questions; • Hold team members accountable to be transparent about their interests and ideas; • Ensure the input and presentation of proposed solutions have sufficient detail; • Use the established reasoning and intent to keep the team focused on interests, not positions; • Confirm decisions and statements with the team so that all team members have agreement and a common understanding; • Keep the team informed on challenges so they are openly discussed and so that you can make informed choices; • Recognize that team members may disagree, but their intent may still be in the best interest of the issue; and • Acknowledge that differences provide opportunities for learning, which can elevate informed choices.

(2) Establish Accountability. With the team established, you may establish a project plan together.

(a) Identify Roles and Responsibilities of Team Members. Formally establish roles and responsibilities to help the team understand and accept their roles and lessen collaborative challenges.

(b) Develop a Work Plan and Schedule.

1. Establish a breakdown of tasks involved to develop, write, and implement the document. You may want to establish meeting schedules, milestones, and specific tasks for the

a. Project Management. Developing a policy and guidance document is… › (3) Incorporate QMS Practices.

document’s development. This listing of specific tasks should include responsible team members and a timeline.

2. The work plan should include deliverables. While the document is certainly one deliverable, you may want to consider other milestones, such as document drafts, specific chapters or sections of the document, related education material or communications, reports, or other items that will demonstrate progress. You should also include dependencies that you identified in the earlier reasoning and intent phase, as the schedule for the document is dependent on those.

3. You should track the work plan, deliverables, and schedule throughout the document’s development and implementation. You may use this tracking data to report to stakeholders and organizational leadership. This data can also help to identify challenges or roadblocks you may encounter, which can be used to inform leadership for information-sharing or getting support in addressing these challenges.

(c) Resource Planning. As you develop a work plan, note specific resources that you may need as you develop and implement the document. This may include operational and/or contract support personnel, travel, tool and technology development, development and administration of educational programming, dissemination of communications, and conduct of change activities or other resources unique to this effort. The work plan and schedule should reflect the need for these identified resources. Work with appropriate offices to determine the various resource availability.

(d) Determine the Level of Responsibility for Document Approval. The established organizational intent, document audience and type, and the Guidance Document Pyramid’s scale on authority, responsibility, and influence provides foundational information as you determine the level of approval/signature level needed for the document. While some types of documents always require a signature, not all documents require signature authority nor the highest organizational signature level.

1. Is the document for awareness, to impart influence on a specific audience, or for information dissemination? The document may not need signature authority but only consensus or approval.

2. Does the document require the review or acceptance of something as part of our responsibility to act? Does the document require some type of intervention or approval, thus having some level of authority? All documents in which we exercise our authority will require signature approval, but the level of that signature may vary. Consider the complexity, scope, and impact the document may have on stakeholders. The greater the complexity, scope, and impact, the greater likelihood the document may need a higher level of signature authority. If appropriate, reference existing guidance that includes information on specific requirements for signature authority (see Appendix A).

(3) Incorporate QMS Practices. Your project management should include QMS practices, such as having a structured approach, appropriate documentation, and incorporating measurable goals. If any processes are established during the development of the document, you should

follow established QMS procedures for documenting and publishing these processes. To ensure compliance with the consistency and standardization initiative, document development should include methods for stakeholder feedback at appropriate milestones. You can find more information at: https://www.faa.gov/about/office_org/headquarters_offices/avs/consistency_stan dardization.

a. Project Management. Developing a policy and guidance document is… › (5) Plan to Measure Success.

(4) Address Changes Caused by New or Revised Policies. It is important during this early stage of planning that you address potential changes and plan to incorporate change principles during the document’s development. Research has shown that if we consider and address a change at the start of a project, it has a strong positive impact on the project’s success. At this point in the document’s planning, the level or degree of change is likely still unknown, as the solution is not yet determined. However, you can still consider and prepare for change by doing the following:

• Describe the current status of the policy area and determine if the policy area affects a tool or technology, a procedure, job role, organizational or reporting structure, performance measures, critical behaviors or mindset, other factor, or any combination of these. • Consider the groups affected in this policy area, the size of those groups, if the groups are affected differently by this policy area, if there have been recent changes in similar areas, and how the groups adapted to these recent changes. • Describe what success looks like, such as the desired outcomes, quality standards, stakeholder acceptance, stakeholder satisfaction, resources expended, policy deadlines, knowledge and skills exhibited by affected groups, or communication or collaboration desired by affected groups. • Establish how you will validate success. For example, if you define specific levels of quality standards, how will you measure how those quality standards are applied? If a desired outcome is to increase knowledge in a specific subject, how will you determine if that knowledge level has increased? • As you initiate these conversations on how to validate success, you may find that you need to determine baseline data for a comparison with post-implementation data. • It is important to refrain from including solutions in these success statements but to focus more on outcomes.

(5) Plan to Measure Success. As you determine how you will measure success, it is easy to default to quantitative measures, such as the number of training classes given or the number of request forms received. However, these types of measurements likely will not inform how desired outcomes are met. While reporting the number of classes provided shows that training was conducted and how many individuals were trained, it likely will not provide information if knowledge was increased or if the affected groups apply the knowledge consistently and correctly. You may need to establish methods for collecting and analyzing qualitative data to validate your defined success. Also, be aware that success and compliance to a policy may change over time.

b. Generate and Determine Solutions. Now you are ready to begin to… › (6) Choose a Policy Solution.

b. Generate and Determine Solutions. Now you are ready to begin to generate potential solutions for the issue. Team members should feel safe to present potential solutions and should be open to listening to other team members present their ideas.

(1) Address Assumptions or Biases. It is important for the team to be aware of any assumptions or biases, especially during this step of generating potential solutions. It may be good practice for the team to discuss any preferred solutions to be aware of any preferences. This may help the team overcome the tendency to jump to a solution too quickly. Having an open discussion about assumptions and biases can help the team identify areas of resistance and address them early.

(2) Apply Mutual Learning. Mutual learning continues to be important so that the team generates many possible solutions and considers all perspectives. Specifically, mutual learning approaches of curiosity, compassion, and informed choice are important. See subparagraph 3a(1)(e) for a list of mutual learning tactics.

(3) Use Critical Thinking. Apply critical thinking during the entire process of policy and guidance document development and be aware that it becomes especially important as you evaluate potential solutions. For each proposed solution, the team should discuss:

• Its pros and cons; • How it could bring the desired outcomes; • Any unintended consequences; • Resources needed to implement; • Complexity of implementing the solution; • Challenges or resistance in implementing the solution; • Level of consistency with similar policies and guidance; and • Flexibility and scalability of the potential solution.

(4) Apply an Integrated Management Approach. You should apply integrated management as you analyze and determine the policy solution and apply either safety management, enterprise risk management, or quality management procedures. Reference the appropriate published guidance on integrated management.

(5) Use Systems Thinking. As part of the critical thinking and integrated management discussions, the team should keep a systems thinking mindset. It is likely that this system interacts with other systems. It is essential to consider all affected systems and determine all future effects that could transpire as you analyze each potential solution. Consider the audience of the document and the impact on them, not just the safety impact, but also other factors such as resources or changes needed to implement the solution. Consider the offices that would have a role in implementing the policy. It may be Safety Assurance, but it could also be other FAA offices.

(6) Choose a Policy Solution. You conclude this analysis after evaluating all possible solutions and decide on a policy solution.

d. Ensuring Stakeholder and SME Feedback During Planning and… › (2) Depending on the type of document, its topic, and its level of…

c. Create an Outline/Plan for the Document. Document organization is essential for effective guidance. Before you begin to write the document, and as a final step in the planning phase of document development, develop an outline of chapters, sections, and major points. The outline should be detailed enough to provide a complete picture of how the document will be organized and its full content. This outline can serve as a checkpoint with stakeholders for critical feedback.

(1) Create a New Document.

(a) If the document is new, you can create a list of all concepts and information and then organize related notions into smaller groups.

(b) If the document has chapters, each chapter should be relatively independent of the other chapters but be placed in an order that provides a linear and logical structure from chapter to chapter. Whether within a chapter or in a document without chapters, the sections should also be organized to build upon each other and provide a structured flow.

(c) Ensure headings and subheadings effectively represent what you wish to convey.

(d) At this stage, the formatting for the outline is not as important as making sure your ideas are grouped appropriately and that the groups are arranged in an effective order.

(2) Update Existing Documents. If you update an existing document, you could use its structure as an outline and a starting point, making adjustments for your changes.

d. Ensuring Stakeholder and SME Feedback During Planning and Development.

(1) During planning, it is important that there are dedicated mechanisms to receive stakeholder and SME feedback. If you have a method to obtain feedback before you begin to write, it can support a smoother process during formal review, publication, and implementation. Early involvement can also prepare other organizations for future changes. Interdependencies (i.e., technologies, other guidance documents, systems, and procedures) may be affected. Interdependence is more than collaborating to get the guidance complete. Some examples of dedicated mechanisms to ensure feedback could be regular project team meetings with stakeholders, milestone meetings with stakeholders, open discussion forums, and use of communication portals for sharing input. Additionally, incorporating specific strategies during meetings with stakeholders can support receiving meaningful feedback. Having a planned purpose and process meeting can ensure stakeholders are prepared to give needed feedback. Establishing a structured format can ensure sufficient time for presentation, discussion, and feedback. Identifying a meeting facilitator can help keep the meeting on track to its purpose and process, summarize stakeholder feedback, ensure all interests are acknowledged, and capture critical input that may need to be discussed at future meetings.

(2) Depending on the type of document, its topic, and its level of change, your methods to obtain feedback could vary in formality and frequency. Generally, those types of documents higher up on the guidance document pyramid (see Figure 3-5) would likely have a greater impact on systems and affect more stakeholder organizations and may need more frequent and formal

(1) Purpose and Audience. › (a) Purpose Example.

checkpoints. While this is just a general guideline, apply critical thinking and consider the issue, its system(s), and the level of change when planning for stakeholder and SME feedback.

4. Writing and Development. After you develop an outline and plan for the document, you may begin the writing phase. This phase includes the process and considerations of writing and editing effective guidance. In order to adhere to the organizational intent and achieve the intended outcomes for this policy area, it is important to apply good guidance writing skills and ensure your document is accurate and fact-based so that it is clearly understood by your stated audience.

a. General Characteristics of Effective Guidance. In order to write effective guidance, it is important to understand what major parts make up a guidance document. Guidance is composed of technical and non-technical content as shown in Figure 3-7. These components are described in the subsequent sections.

Figure 3-7. A Policy and Guidance Document Includes Technical Content and

Non-Technical Content to Be Effective

Figure 3-7: picture of page 31Figure 3-7 · page 31
Picture of the page from the copy saved here

b. Technical Content. Technical content is information based on the subject matter. It is fact-based data and includes information, such as references and processes. Most FS publications contain the following types of information:

(1) Purpose and Audience. This content clearly states the purpose of the document and the intended audience. For example:

(a) Purpose Example. “The purpose of this document is to provide methods for how to comply with Federal regulations,” and “The purpose of this document is to direct inspectors to conduct a focused review,” etc.

(1) Language. › (b) Plain Language.

(b) Audience Example. “The primary audience for this notice is the FS Safety Assurance offices’ aviation safety inspectors (ASI). The secondary audience includes the Safety Standards and Foundational Business offices and the Air Traffic Organization (ATO).”

(2) Office of Primary Responsibility (OPR). If your document does not contain a specific section listing the OPR contact information, it is recommended to include this information early in the document. It is recommended to keep this information high-level to account for future organizational changes.

(3) Historical or Background Information. This content usually outlines a sequence or timeline of events and or foundational information.

(4) Cross References. This section documents resources that directly affect the policy document or that the document has an impact on. It may also be important to include references to supplemental materials depending on the specific policy or topic.

(5) Terminology. Depending on the topic, you may need to define associated terminology. Depending on the quantity and type of terms that need definitions, this may need its own section.

(6) Processes and Actions. This information is the policy, process, or procedure being developed. This information is often complex and highly technical and will need a large degree of focus to ensure effectiveness.

(7) Data. The inclusion of quantitative or qualitative data may be needed in order to provide background information, to provide purpose and reasoning for a policy, or may be part of the process or policy being implemented. You should evaluate the quantity and type of quantitative data that is being included to ensure its appropriate location in the document and the appropriate presentation method (i.e., graphs, tables, or text).

c. Non-Technical Content. Non-technical content supports how you present and convey technical information. For example, the formatting, spelling, grammar, punctuation, page numbers, and a document’s overall organization.

d. Write to the Audience. Keep the audience in mind when you write the document. Since readers may include a broad range of internal and external stakeholders, you may need to adjust your writing style based on the audience.

(1) Language.

(a) Regulatory Language. Properly use regulatory language terms, such as “must,” “shall,” and “required.” See Chapter 2 for guidance on specific language that is required, which includes the use of language for statutory or regulatory documents.

(b) Plain Language. Government documents require the author to use plain language per PL 111-274, Plain Writing Act of 2010. The goal of plain language is to ensure documents are as easily understood as possible. As such, plain language is writing that is clear, concise, well

e. Formatting. Format is the visual structure of a policy and guidance… › (1) Document Template.

organized, and follows other best practices appropriate to the subject and intended audience. Common characteristics of plain language include the following:

• Using active voice rather than passive. • Using shorter sentences and paragraphs. • Using words that are easy to understand over technical jargon to ensure the end user understands the content while ensuring you balance the simpler verbiage with the level of technical detail needed for successful implementation.

(2) Style and Grammar. Policy and guidance documents will go through a review by technical editors for non-technical writing aspects. However, every writer should be aware of these linguistic features when they draft documents, and they should use available tools and resources as needed. When drafting the document, you should be aware of the following:

• Using correct grammar, spelling, and punctuation. • Keeping consistent verb tenses. • Using of pronouns for consistent style and readability. • Using consistent terminology to describe specific concepts.

(3) Organizational Pattern. In addition to the document outline, you may need to incorporate an organizational pattern to ensure readability and understandability. Depending on the topic, this could include a chronological or hierarchical approach or a structure that moves from general information to more specific.

(4) Incorporates Expository Writing Characteristics. Expository writing is a writing style that presents research, data, and analytical information from a neutral perspective to inform and explain more complex topics. Early in the guidance development process, we described the policymaker’s mindset as a balance of the safety components of complexity, consistency, risk, and performance. You should reflect this balance in your writing.

(a) Consider a balance between specificity needed to implement the policy with flexibility for future needs and emerging issues. Additionally, too much detail in the writing may lose the reader, which may hinder the ability to implement the policy effectively.

(b) The document should ensure consistency with other guidance documents, programs, procedures, and standards. The document should not include any opinions or subjective statements. The intent of a policy and guidance document is not to persuade but to present a guideline or process in a simple, understandable, and objective manner so that successful implementation is achieved.

e. Formatting. Format is the visual structure of a policy and guidance document.

(1) Document Template. FAA orders, Order 8900.1, notices, and ACs all have standardized formats and templates that dictate how to organize chapters, sections, paragraphs, and subparagraph levels. This includes font size, margin settings, paragraph numbering, and

Chapter 3. Developing Effective Guidance › f. Finalize Your Draft Document. This phase of the document development…

spacing. You can find the standardized formats and templates at: https://avssp.faa.gov/avs/afs/Pa ges/FS_Templates.aspx.

(2) Section 508 Compliance. Section 508 of the Rehabilitation Act of 1973 (codified at Title 29 of the United States Code (29 U.S.C.) § 794d) and FAA Order 1370.120, Section 508 Accessibility Policy, requires policy and guidance documents to be 508 compliant to ensure the public has access to and can use these documents. A well-formatted document will also aid in the navigation and readability of the final document for the accessibility of reviewers and the audience.

(3) Other Formatting Considerations When Drafting the Document:

(a) Proper use of whitespace on a page ensures that documents with a lot of text are easier to read and understand.

(b) Use description headings for chapters, sections, subsections, paragraphs, tables, or figures. These headings should be short and to the point but still descriptive enough so the reader finds needed information more quickly.

(c) Use paragraphs and subparagraphs to organize information to help the reader navigate complex information. Keep in mind that too many paragraph levels can become overly complex, making it more challenging for the reader.

(d) Hyperlinks can provide access to essential and relevant information that directly supports the policy and guidance document. However, overuse of hyperlinks could lead to a frequent need to revise incorrect or broken links or even create a visually distracting page. You should evaluate whether to include hyperlinks to ensure they provide direct value to document users and not a nice-to-know resource.

(e) Use tables and figures to complement the document text. Reference them in the text and use a consistent numbering system. Be mindful of the placement of these graphics to ensure the audience can understand them.

(f) When referencing other documents, follow the standards in Appendix F.

f. Finalize Your Draft Document. This phase of the document development process started with the outline and plan from the previous steps. During this drafting stage, you should ensure regular feedback. This may be from stakeholders who were involved in the earlier planning phases. You should also conduct some editing during this process to support your stakeholders who provide feedback to focus more on content and less on editing. At the end of this phase of writing, editing, reviewing, and revising, a final draft document is ready for the next step in guidance document development (see Figure 3-8, Stages of the Writing and Editing Process).

Figure 3-8: picture of page 35Figure 3-8 · page 35
Picture of the page from the copy saved here

b. Methods of Distribution. There are many vehicles to distribute… › (1) Internal Methods.

Figure 3-8. Stages of the Writing and Editing Process

5. Implementation.

a. Communications and Awareness. It is important to make stakeholders aware of updated or new guidance. There are several methods for mass communication, and this section details several of them.

(1) Confirm Your Audience. The audience(s) you identified during the planning and writing stages help you determine with whom you need to communicate during implementation. Reexamine this list to ensure it remains accurate as you prepare for these communications. As you review this list, evaluate the impacted processes and systems, if any job roles are changing, or if any reporting or organizational structures are impacted.

(2) Plan your Communications. Communicate with all the audiences you identified. Consider the purpose of the document and how it relates to each member of the audience. Different audiences may need a different communication style or method and different levels of detail and content in communications.

(a) Some audiences may only need an awareness-focused communication. Other audiences may need information that is more specific if their roles and responsibilities are changing.

(b) Consider the quantity of communications that you need to distribute. Some audiences need to receive multiple communications to reinforce the policy, and others may need communication in phases that emphasize specific policy aspects.

(c) As you develop communications, you may need to reference the same resources used during the policy writing process, such as agency guidance on writing and information management (see Appendix A).

b. Methods of Distribution. There are many vehicles to distribute information to FAA employees. Some examples are the Employee Advisory, Management Advisory, FAA Focus, AVS Flyer, FAA Daily Broadcast, etc. Decide which vehicle(s) are best for the document and work with the appropriate office or division to execute the communications.

(1) Internal Methods. In an effort to streamline organizational messaging to all FS employees and all FS managers, the Office of Foundational Business established the Employee Advisory, a mass emailing process in FS. This process limits messages to FS employees and managers to designated days. This allows employees to anticipate delivery of FS news and have less concern about missing important information. Refer to the Flight Standards Administrative Manual (FSAM) for more information.

c. Change Considerations and Outreach. We use change principles, a… › (5) As you establish a framework for change activities, be aware that…

(2) External Methods. Depending on the document type, you may need to inform the aviation industry at large with a press release. If so, you will work with the FAA Office of Communications (AOC) to develop and send the press release.

(3) Coordination/Notification With Bargaining Unit Employees. Consider what actions you should take to ensure the bargaining unit processes are followed.

c. Change Considerations and Outreach. We use change principles, a systematic approach for leading the people side of change for new projects and programs. Change is inevitable in the aviation industry, and many changes institute a new policy or guidance document or a revision to current guidance. In earlier phases of the document development process, you identified a case for change on the issue, which included the following factors:

• Why the change is needed or if there was a trigger for the change; • The risks of not changing or waiting for the change; • The impacted groups and the level of change they will experience; • The benefits of implementing this change (e.g., benefits to the agency, employees, industry, the NAS at large, etc.); • A description of the current state and the future state; and • Potential challenges or risks associated with the policy.

(1) You should revisit this case for change and evaluate whether it ensures all aspects are still relevant and accurate. Reconsider these same questions and revise the case for change, as applicable.

(2) After you confirm the case for change, determine what type and extent of change activities you need to conduct. Again, different audiences may require different levels and types of change principles. This may include activities such as communications, outreach, training, briefings, tools, and direct support.

(3) Work with AFB-540 to determine collaboratively if new or enhanced training is needed. This office provides instructional systems design expertise to help you develop learning strategies that best meet the FS training and development needs. Know that each policy change may require different change solutions or a mixture of activities.

(4) Depending on the findings of any safety risk analyses or organizational risk analyses, you may need to work with AFB-400 to focus communications on certain risk areas to ensure understanding and acceptance.

(5) As you establish a framework for change activities, be aware that you may need to have different activities at different points during implementation. Considering the stages of change, the current state, any transitional states, and the future state may need different targeted activities connected to the unique aspects of each state. Using change principles are essential to ensure the policy is accepted and implemented properly to ensure success (see Figure 3-9, The Change Process). Refer to the Change Management Services Branch (AFB-160) internal website for more information.

Figure 3-9: picture of page 37Figure 3-9 · page 37
Picture of the page from the copy saved here

b. Conduct a Policy Evaluation. We define success by reaching a goal or… › (1) Conduct Continuous Evaluation for Success.

Figure 3-9. The Change Process

6. Continuous Evaluation.

a. Importance of Policy Evaluation.

(1) Responsibility of the OPR. Each OPR has a key responsibility to stakeholders to ensure that its guidance documents are current, reflect the regulations, and do not contradict one another. As discussed previously, effective guidance documents are consistent with the applicable rules and with each other.

(2) Value of Evaluating for Success. The OPR has a responsibility to evaluate policy and guidance for effectiveness and to ensure that the desired outcomes occur. Working with your stakeholders and users of the policy document can support this evaluation to identify challenges and successes.

(3) Value of Periodic Review. When guidance documents do not reflect current regulatory requirements and FAA, Aviation Safety (AVS), and FS policies, the outcome is an uneven and inconsistent application of agency guidance and standards. Additionally, this can negatively affect the communication and coordination between offices, which may lead to further inconsistency in the application of agency guidance and standards.

b. Conduct a Policy Evaluation. We define success by reaching a goal or accomplishing the objective. Success is measured qualitatively by looking at overarching trends within and outside our organization to determine whether FAA guidance produces the desired result. We can also measure policies quantitatively through data collection and analysis. This journey towards success includes making course corrections along the way when needed.

(1) Conduct Continuous Evaluation for Success. In order to enhance success, it is crucial that FS staff perform evaluations to determine whether policy documents are applied as intended. Additionally, the OPR should work interdependently with stakeholders to ensure the guidance is accurate and that it achieves desired outcomes. It is imperative that the OPR evaluates whether

(2) Responsibilities and Expectations. › (b) Follow-On Actions.

the guidance document meets the vision of success described during the policy development process. During these evaluations, an OPR may discover that a policy is not achieving the desired outcomes. The OPR should analyze their findings to determine if further communications, education, outreach, or supporting documentation (i.e., work instruction, job aid) is needed before revising the policy.

(2) Conduct Periodic Reviews. Periodic review is the regular and methodical review of policy and guidance documents to ensure they remain effective, relevant, and accurate.

(a) Order 1320.1, FAA Directives Management, requires each OPR to review, revise, modify, or rescind all directives for which it is responsible at least every 3 years. Order 1320.46, FAA Advisory Circular System, requires an OPR to ensure all ACs remain current. In keeping with the requirements and intent of the previously mentioned orders, OPRs will review all their orders, order supplements, and ACs at least every 3 years for currency, accuracy, and consistency; this includes each section of Order 8900.1. Notices do not fall under this review requirement, as they expire within one year of issuance. OPRs should also include other types of documents, such as SAFOs, InFOs, job aids, job task documents, and FAA websites as part of the review.

(b) The OPR is responsible for conducting the triennial review. The OPR may elect to perform a document life cycle (DLC) review early, which would reset the next due date. Additionally, an OPR may elect to postpone a DLC review if a revised draft of that guidance document is currently under review as long as that review has included all DLC review components. This ensures consistency among these supporting documents and the regulations, related directives, and ACs. Refer to AFS 002-103 for additional information on periodic reviews.

c. Directives Feedback.

(1) Value of Stakeholder Feedback. After guidance documents are published, they become subject to various forms of internal and external stakeholder feedback. Feedback provides valuable input to guidance developers in a structured format. Reviewing feedback provides OPRs an opportunity to identify errors and discrepancies. Feedback is an essential part of continuous improvement.

(2) Responsibilities and Expectations.

(a) Expectations of OPRs. OPRs must meet deadlines for the review and disposition of feedback items. If there are no set deadlines, OPRs must review all feedback items as soon as possible. In accordance with effective guidance practices, OPRs should review open feedback items whenever you create or update guidance documents. As an OPR, you will manage feedback items to use in future guidance development activities within the division.

(b) Follow-On Actions. OPRs should follow guidance review processes to address necessary revisions to guidance documents. Ensure you revise the associated documents, training materials, websites, and other related content to ensure consistency between all documents.

6. Continuous Evaluation. › d. Determining the Next Steps. You should conduct a periodic review of…

Note: Inconsistencies between ACs and directives on the same topic should be resolved as soon as practical. Providing conflicting information to FS personnel and industry can make compliance difficult. If FS personnel discover a conflict between a directive and an AC, they should raise the issue with the appropriate policy office for resolution. The selected method of feedback may depend on the impact of the conflict.

(c) Methods of Delivering Feedback. Internal and external stakeholders can provide feedback on published FS guidance documents through a variety of methods, some of which include:

• Applicable FS Repository Feedback. Applies to documents contained in FS repositories such as DRS. • AVS Directive Feedback System. Applies to all guidance documents used by AVS employees. • Directive Feedback (Agency Level). Stakeholders use FAA Form 1320 19, Directive Feedback Information. • Direct Feedback. Internal or external stakeholders use email or telephone calls to FS divisions. • AVS Stakeholder Feedback Process. Applies to all QMS documents, including QMS processes, programs, work instructions, forms, standard operating procedures (SOP), etc.

d. Determining the Next Steps. You should conduct a periodic review of guidance documents to determine whether the guidance document is still necessary and relevant. If the guidance document is still needed, assess if the guidance document achieves the desired result. You may achieve this in various ways as you:

• Assess data. • Assess accident/incident reports. • Assess Enforcement Information System (EIS) data. • Consult with stakeholders. • Analyze trends.

Note: If you determine that a guidance document is no longer necessary, begin work to cancel the guidance document.

Chapter 4. Review and Clearance

1. Importance of Stakeholder Review for New and Revised Guidance Documents. It is important to have individuals and groups not involved in developing the document to review it before publication.

2. Types of Informal and Formal Collaboration and Review. › b. Document Collaboration Across the Service. A process for draft…

a. Stakeholders. While there is only one OPR for a document, it is likely there are one or more stakeholders, some very significant. It is critical to get input, feedback, and concurrence from these stakeholders by way of informal and formal reviews.

b. Types of Coordination. For this chapter, the following terms apply:

• “Internal” means internal to the FAA. • “External” means external to the FAA. • “Informal coordination” means a review where a signed Clearance Record (CR) is not required. • “Formal coordination” means a review that requires a signed CR.

2. Types of Informal and Formal Collaboration and Review. There are informal and formal methods available to review FS guidance draft documents. Some guidance documents, such as changes due to minor editorial updates, require little to no review or coordination. (If an SME wants to use the editorial update process, they must ensure the edits do not affect policy and do not change the policy process or intent.) Others, such as a significant change to Order 8900.1 or an AC, may require substantial collaboration and review. Regardless of the type, reviewers are expected to:

• Provide specific suggestions on how to change the content. • Provide a rationale as to why the change is needed.

a. Informal Review and Clearance. Informal review or pre-clearance provides a proactive review of draft policy documents by internal stakeholders prior to formal coordination. Informal reviews do not require official forms and/or comment logs. This process benefits FS by incorporating the key principles of critical thinking, consistency, and interdependence in the development process.

(1) Critical Thinking. Reviewers from other divisions and field offices may analyze and question proposed changes from a different perspective.

(2) Consistency. Reviewers may help account for the different work environments in which the proposed guidance will apply and can ensure consistency with existing guidance, programs, and activities.

(3) Interdependency. While the author is an SME, other stakeholders and SMEs may offer insight based on their unique knowledge, responsibilities, and experience.

b. Document Collaboration Across the Service. A process for draft document sharing, review, and comment prior to it entering formal coordination is established in QMS and Business Processes in AFS-002-103. This process ensures the informal distribution of draft documents

e. Public Review and Comment. Once the coordination of the draft is… › (1) FS requires public comment for ACs.

across the functional offices, and it further supports a collaborative and transparent approach to policy drafting. This organized method for informally coordinating draft documents with internal stakeholders helps the OPR become aware of impacts that may not have been considered previously. Increasing communication and transparency with stakeholders early in the document development stages can improve the overall quality of FS policy and the speed in which it is published.

c. Internal Formal Coordination. This formal review period involves applicable FS divisions and offices identified by the OPR that have a stake in the document. Other FAA offices may also need to be a part of the internal formal coordination depending on the subject of the guidance document. Formal coordination is conducted in a more systematic, rigid environment that includes the following features:

Continue reading ↓ 120 of 164 passages shown