Radar Vectors
FAA Order Cancelled Issued Feb 4, 2013 AFS-100 88 pages Copy saved Nov 18, 2026

Order FS 1100.1C Flight Standards Service Organizational Handbook

This document is no longer current. Cancelled by FS 1100.1D. Check the official source before relying on it.

Official source ↗ Open PDF

Director, Flight Standards Service

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

ORDER FS 1100.1C

National Policy Effective Date:

2/4/13

SUBJ: Flight Standards Service Organizational Handbook

1. This order describes Flight Standards Service’s (AFS) mission, functions, and organizational structure to the lowest level. The organizational structure and functions at the director level is documented in Federal Aviation Administration (FAA) Order 1100.2, Organization—FAA Headquarters.

2. Revisions to this order should be made based on organizational needs, and management considerations and approval. The Organizational Resources and Program Management Division, AFS-100, and the Planning and Performance Management Branch, AFS-160, are responsible for the maintenance of this order.

for John M. Allen Director, Flight Standards Service

Distribution: Electronic Only Initiated By: AFS-100

Table of Contents

Table of Contents

Paragraph Page

Chapter 1. General Information

Section 1. Introduction

1. Purpose of This Order … 1-1 2. Audience … 1-1 3. Where You Can Find This Order … 1-1 4. What This Order Cancels … 1-1 5. Explanation of Changes … 1-1 Section 2. Requesting Organizational Change

6. Discussion … 1-1 7. Director’s Management Team (DMT) … 1-2 8. Initiating an Organizational Change … 1-2 Section 3. Flight Standards Service, AFS-1

9. Mission … 1-3 10. Functional Organization … 1-3 11. Functions … 1-4 12. Special Delegations … 1-5 13. Special Relations … 1-6 14. Office of the Director, AFS-1 … 1-7 15. Aviation Special Operations and Security Staff (ASOS), AFS-7 … 1-8 16. Executive Officer, AFS-10 … 1-9 Figure 1-1. Flight Standards Service Functional Organization Chart … 1-10

Chapter 2. Flight Standards Quality Assurance Division, AFS-40

1. Flight Standards Quality Assurance Division, AFS-40 … 2-1 2. Flight Program Oversight Branch, AFS-41 … 2-1 3. Quality Management System Branch, AFS-42 … 2-1 4. Evaluation Program Branch, AFS-43 … 2-1

Figure 1-1: picture of page 2Figure 1-1 · page 2
Picture of the page from the copy saved here

Chapter 3. International Programs and Policy Division, AFS-50

1. International Programs and Policy Division, AFS-50 … 3-1 2. International Affairs Branch, AFS-51 … 3-1 3. International Operations Branch, AFS-52 … 3-2 4. International Technical Support Branch, AFS-53 … 3-2

Chapter 4. Flight Program Division, AFS-60

1. Flight Program Division, AFS-60 … 4-1 2. Safety Program Officer, AFS-60 … 4-1 3. Flight Program Service Center Branch, AFS-62 … 4-1 4. Flight Program Central Administration Branch, AFS-63 … 4-2 5. Business and Planning Branch, AFS-64 … 4-2 6. Standardization Branch, AFS-65 … 4-2

i UNCONTROLLED COPY WHEN DOWNLOADED Check with FSIMS to verify current version before using

Table of Contents (Continued)

Table of Contents (Continued)

Paragraph Page

Chapter 5. Unmanned Aircraft Systems (UAS) Integration Office, AFS-80

1. Unmanned Aircraft Systems (UAS) Integration Office, AFS-80 … 5-1 2. Management Operations Section, AFS-82 … 5-1 3. UAS Integration Section, AFS-83 … 5-2 4. UAS Safety and Data Management Section, AFS-84 … 5-2 5. UAS Tactical Operations Section, AFS-85 … 5-3 6. UAS Airworthiness Section, AFS-86 … 5-4 7. UAS Flight Operations Section, AFS-87 … 5-5 8. UAS Research and Development Section, AFS-88 … 5-6

Chapter 6. Organizational Resources and Program Management Division, AFS-100

1. Organizational Resources and Program Management Division, AFS-100 … 6-1 2. Administrative Resources Branch, AFS-110 … 6-1 3. Financial Resources Management Branch, AFS-120 … 6-1 4. Human Capital Resource Management Branch, AFS-130 … 6-2 5. Technical Information and Communications Programs Branch, AFS-140 … 6-2 6. New Technology Development Branch, AFS-150 … 6-3 7. Planning and Performance Management Branch, AFS-160 … 6-3 8. AFS (AVS) Staffing Tool and Reporting System Branch (ASTARS), AFS-170 … 6-3

Chapter 7. Air Transportation Division, AFS-200

1. Air Transportation Division, AFS-200 … 7-1 2. National Simulator Program (NSP), AFS-205 … 7-2 3. Part 121 Air Carrier Operations Branch, AFS-220 … 7-3 4. New Program Implementation Branch, AFS-240 … 7-4 5. Part 135 Air Carrier Operations Branch, AFS-250 … 7-5 6. Technical Programs Branch, AFS-260 … 7-5 7. Policy Integration Branch, AFS-270 … 7-6 8. Air Carrier Training Systems and Voluntary Safety Programs Branch, AFS-280 … 7-7 9. Program Management Support Branch, AFS-290 … 7-8

Chapter 8. Aircraft Maintenance Division, AFS-300

1. Aircraft Maintenance Division, AFS-300 … 8-1 2. Program Management and Information Branch, AFS-310 … 8-1 3. Special Programs Branch, AFS-320 … 8-1 4. Air Carrier Maintenance Branch, AFS-330 … 8-2 5. Repair Station Branch, AFS-340 … 8-2

ii UNCONTROLLED COPY WHEN DOWNLOADED Check with FSIMS to verify current version before using

Table of Contents (Continued)

Paragraph Page

6. General Aviation Branch, AFS-350 … 8-3 7. Avionics Branch, AFS-360 … 8-4

Chapter 9. Flight Technologies and Procedures Division, AFS-400

1. Flight Technologies and Procedures Division, AFS-400 … 9-1 2. Management Operations Branch, AFS-405 … 9-2 3. AFS ADS-B Program Office, AFS-406 … 9-2 4. NextGen Field Program Branch, AFS-408 … 9-3 5. Flight Operations Branch, AFS-410 … 9-3 6. Flight Procedure Standards Branch, AFS-420 … 9-4 7. Future Flight Technology Branch, AFS-430 … 9-4 8. Flight Operations Simulation Branch, AFS-440 … 9-5 9. Flight Systems Laboratory, AFS-450 … 9-5 10.Flight Procedure Implementation and Oversight Branch, AFS-460 … 9-6 11. Performance Based Flight Systems Branch, AFS-470 … 9-6

Chapter 10. Flight Standards Training Division, AFS-500

1. Flight Standards Training Division, AFS-500 … 10-1 2. Program Implementation Branch, AFS-520 … 10-2 3. Quality Assurance Branch, AFS-530 … 10-3 4. Integrated Curriculum Branch, AFS-540 … 10-3 5. Airworthiness Curriculum Branch, AFS-550 … 10-5 6. Operations Curriculum Branch, AFS-560 … 10-6

Chapter 11. Regulatory Support Division, AFS-600

1. Regulatory Support Division, AFS-600 … 11-1 2. Delegation Management Program, AFS-605 … 11-1 3. Light Sport Aviation Branch, AFS-610 … 11-2 4. Aviation Data Systems Branch, AFS-620 … 11-3 5. Airman Testing Standards Branch, AFS-630 … 11-3 6. Designee Standardization Branch, AFS-640 … 11-4 7. Designee Quality Assurance Branch, AFS-650 … 11-5

Chapter 12. Civil Aviation Registry, AFS-700

1. Civil Aviation Registry, AFS-700 … 12-1 2. Aircraft Registration Branch, AFS-750 … 12-1 3. Airmen Certification Branch, AFS-760 … 12-2

Chapter 13. General Aviation and Commercial Division, AFS-800

1. General Aviation and Commercial Division, AFS-800 … 13-1 2. Planning and Program Oversight Branch, AFS-805 … 13-2 3. Airmen Training and Certification and Training Branch, AFS-810 … 13-3

iii UNCONTROLLED COPY WHEN DOWNLOADED Check with FSIMS to verify current version before using

iv UNCONTROLLED COPY WHEN DOWNLOADED Check with FSIMS to verify current version before using

Table of Contents (Continued)

Paragraph Page

4. Commercial Operations Branch, AFS-820 … 13-4 5. General Aviation Operations Branch, AFS-830 … 13-5 6. FAA Safety Team (FAASTeam) Branch, AFS-850 … 13-6

Chapter 14. Flight Standards National Field Office, AFS-900

1. Flight Standards National Field Office, AFS-900 … 14-1 2. Program Management Branch, AFS-905 … 14-2 3. Certification and Evaluation Program Office … 14-2 4. Field Support Program Office … 14-3 5. Continual Improvement Program Office … 14-3 6. Flight Standards SMS Program Office … 14-3 7. Flight Standards National Operations Program Office … 14-4 8. Analysis and Information Program Office … 14-5 9. System Approach for Safety Oversight (SASO) Program Office … 14-6 Figure 14-1. Flight Standards National Field Office Organizational Chart … 14-7

Chapter 15. Regional Flight Standards Divisions

1. Flight Standards Division … 15-1 Section 1. Regional Division Roles and Responsibilities … 15-2

Figure 14-1: picture of page 5Figure 14-1 · page 5
Picture of the page from the copy saved here

2. Manager, Regional Flight Standards Division (RFSD), AXX-200 … 15-2 3. Assistant Division Manager, AXX-201A … 15-2 4. Associate Division Manager, AXX-201B … 15-3 5. Resource and Program Management Branch, AXX-210 … 15-3 6. NextGen Branch, AXX-220 … 15-3 7. Technical Branch – General Aviation, AXX-230 … 15-4 8. Technical Branch – Air Carrier, AXX-240 … 15-4 9. Safety Analysis and Evaluation Branch, AXX-290 … 15-4 10. Field Offices … 15-5 a. Flight Standards District Office (FSDO) … 15-5 b. Certificate Management Office (CMO)/ Certificate Management Unit (CMU) … 15-5 c. International Field Office (IFO)/ International Field Unit (IFU) … 15-5 d. Aircraft Evaluation Group (AEG) Offices … 15-5 Figure 15-1. Regional Flight Standards Division Organizational Chart … 15-6

Figure 15-1: picture of page 5Figure 15-1 · page 5
Picture of the page from the copy saved here

6. Discussion. › b. Peer Review. For the purpose of this order, any changes made to an…

Chapter 1. General Information

Section 1. Introduction

1. Purpose of This Order. This order defines the organization and functions of the Flight Standards Service (AFS): Washington headquarters (HQs), regional and national field office elements to the lowest level, and updates the organizational structure and programs within the Service.

2. Audience. The audience for this order includes employees from the following services within the office of the Associate Administrator for Aviation Safety (AVS): the branch level in Washington HQ AFS, all regional Flight Standards divisions (RFSD), and all supervisors in the Flight Standards field offices.

3. Where You Can Find This Order. You can find this order on the MyFAA employee Web site at https://employees.faa.gov/tools_resources/orders_notices. Inspectors can access this order through the Flight Standards Information Management System (FSIMS) at http://fsims.avs.faa.gov.

4. What This Order Cancels. Order FS 1100.1B, Flight Standards Service Organizational Handbook, dated July 17, 2009, is canceled.

5. Explanation of Changes. This revision incorporates updated information on the roles and responsibilities within the AFS organization.

Section 2. Requesting Organizational Change

6. Discussion. AFS makes changes to this order through the agency directives management system. As a result, AFS has established a process to evaluate proposed organizational changes that require a change to Order FS 1100.1, Flight Standards Service Organizational Handbook. This process assures that organizations directly affected by a change to the order coordinate on those draft changes.

a. Examples of Organizational Realignments. A number of situations necessitate realignment within AFS. A division or regional manager may determine the need for a change to a branch within the division/region or to create or eliminate a branch. A staff manager may seek to expand his or her staff to a division/region or to transfer staff functions to a division/region for better grouping of functions and expertise.

b. Peer Review. For the purpose of this order, any changes made to an existing division, region, branch, or staff among AFS HQ and Regional Offices (RO) must be accomplished using a peer review process to evaluate proposed organizational changes and to make recommendations on such proposals to the Director, Flight Standards Service (AFS-1). The result of the peer review will either be a revision of the proposal to reflect changes suggested by the peer review or a recommendation that the Service Director either approve or disapprove the proposed change, with or without modification. However, AFS-1 can approve or disapprove the proposed changes without establishing a peer review.

b. Review by the DMT. › (1) Upon receipt of the memorandum requesting an organizational change,…

c. Publication. After approval by the Service Director, the publication of a change to Order FS 1100.1 implements the Director’s decision. (See paragraph 8b for a description of the peer review and approval process.)

7. Director’s Management Team. The Director’s Management Team (DMT) consists of the managers of the HQ and regional AFS divisions/staffs or their designated deputies. The chair of the DMT is the Deputy Director, AFS-2. The DMT conducts the peer review process for organizational changes to AFS HQ and regional divisions/staffs.

8. Initiating an Organizational Change.

a. Determine the Need for a Change in the Organizational Structure. After the staff, division, or regional manager has determined the need for reorganization or realignment, the manager prepares a request in a decision memorandum format. The memorandum must be addressed to AFS-1. The memorandum should contain background or supporting information and address, at a minimum, the following areas:

(1) The general purpose of the reorganization;

(2) An explanation of how the reorganization will apply resources to AFS priorities;

(3) An explanation of how the reorganization relates to the AFS, AVS, and agency strategic plans;

(4) A description of the staffing implications, e.g., increases, decreases, supervisory ratios, etc;

(5) An explanation of how the reorganization would improve the efficiency and effectiveness of AFS, e.g., it would improve customer service, enhance aviation safety, or be a more effective grouping of functions and duties, etc;

(6) Any issues or situations on which the reorganization could have an adverse impact. The memorandum should address the pros and cons of each issue;

(7) Any other issues surrounding the proposed reorganization/realignment, and a discussion of the issues; and

(8) Divisions/staffs making organizational changes should consult with the appropriate bargaining unit representatives when drafting the proposed reorganization request to assure that union concerns are addressed.

b. Review by the DMT.

(1) Upon receipt of the memorandum requesting an organizational change, AFS-2 will call a meeting of the DMT. The manager requesting the change remains part of the DMT but will only answer questions about the proposed change for his or her peers. The manager will not participate in the determination of the recommendations.

11. Functions. › a. AFS is responsible for:

(2) The DMT will review the proposed change based on the criteria in chapter 1, section 2, paragraph 8a, using the requested memorandum, any other supplemental information from the manager, and any verbal answers supplied by the division/staff manager requesting the change.

(3) AFS-2 will prepare a recommendation (in memorandum format with “Approved” and “Disapproved” signature blocks for the Director’s signature) based on the DMT’s decision for the Service Director to either approve or disapprove the request for an organizational change. All supporting material, e.g., the original decision memorandum, any background, supporting information, or issue papers, etc., must be included with the recommendation for the Service Director’s reference.

c. Approval by the Service Director.

(1) If the Service Director approves the request for an organizational change, he or she signs the recommendation memorandum on the “Approved” signature block and returns the package to the manager requesting the organizational change.

(2) The manager then forwards the approved package (original requesting memorandum and background or supporting material) to the Planning Performance Management Branch (AFS-160) through the Organizational Resource and Program Management Division (AFS-100) for processing under the agency’s directives management system.

(3) An AFS-160 staff specialist will prepare and coordinate the changes to Order FS 1100.1 in accordance with agency guidelines.

d. Disapproval by the Service Director. If the Service Director disapproves the proposed organizational change, the DMT returns the package to the division/staff manager requesting the organizational change and provides an explanation of the Director’s action.

(1) The DMT may identify areas that the requesting manager may wish to address before resubmitting the proposed change.

(2) The manager resubmits the proposal in the same manner as before.

Section 3. Flight Standards Service, AFS-1

9. Mission. We assure the safety, while enabling the adventure, commerce and service of aviation.

10. Functional Organization. The functional organization structure of AFS is shown in Figure 1-1.

11. Functions.

a. AFS is responsible for:

(1) Certification, operating methods, flight operations, and maintenance activities of U.S. air carriers and foreign air carriers operating in and over the United States.

b. With respect to the foregoing: › (1) Develops and recommends, or issues within the delegated authority…

(2) Maintenance standards for U.S.-registered aircraft, including airworthiness.

(3) Certification and conduct of commercial, industrial, private, and general aviation operations, including rotorcraft.

(4) Examination and certification (except medical) of airmen (except air traffic control tower (ATCT) operators) and air agencies.

(5) Examination and appointment of persons designated and authorized to act as representatives of the Administrator pursuant to Title 49 of the United States Code (49 U.S.C.) with respect to certification of flight airmen and the maintenance of civil aircraft and products.

(6) Use of air navigation facilities, appliances, and systems by civil aircraft; the minimum equipment capability of civil aircraft for operating in an established environment; and the operational aspects of flight procedures including en route and instrument approach procedures (IAP) (except air traffic control (ATC) procedures).

(7) Approval of and surveillance over the aircraft maintenance programs of operators and pilot schools.

(8) Assurance that appropriate operational considerations are accommodated with regard to aircraft maintenance policies, procedures, and practices.

(9) Operating requirements and criteria for use of aircraft systems; e.g., determining whether a navigation device can be used as a sole source of navigation or how many are required, or determining the type of airborne equipment required for low visibility approaches and landings.

(10) Ensuring that operational considerations are accounted for in the “Operating Limitations and Information” (including operational requirements and pilot procedures) requirements, policies, and practices for the development of airplane and rotorcraft flight manuals.

(11) Flight inspection policy.

(12) Promoting safety through monitoring compliance with the Federal aviation regulations, including the gathering of evidence and the preparation of Enforcement Investigative Reports (EIR) to support the initiation of administrative and legal enforcement action, when appropriate.

b. With respect to the foregoing:

(1) Develops and recommends, or issues within the delegated authority of the Director, regulations and minimum standards.

(2) Develops and recommends national policies for issuance by the Administrator.

(3) Develops and issues guidance, procedures, practices, and program plans consistent with national policies.

b. With respect to the functions of subparagraph 11a, final authority… › (2) To issue, amend, withdraw, or extend notices of proposed rulemaking.

(4) Develops and recommends specific program goals and areas of emphasis to guide field program planning and performance.

(5) Evaluates the adequacy of existing regulations, policies, procedures, practices, and program performance in meeting broad Federal Aviation Administration (FAA) goals, as well as specific program goals.

(6) Develops plans and technical guidance for the protection and use of civil aviation resources, except airports, in time of national emergency.

(7) Recommends budget levels for formulation of decision packages on national programs, and recommends allocations of appropriated resources based on review of HQ and regional requirements and quarterly review information.

(8) Develops and recommends programs and practices to ensure the professional competency and development of employees.

(9) Determines the need for and recommends research and development (R&D) projects, establishing the relative priority of those projects recommended.

12. Special Delegations.

a. Final authority is delegated to AFS-1 to make, issue, amend, and terminate rules and regulations promulgated under Titles III and VII of 49 U.S.C. relating to the following subject matters:

(1) Appendices to Title 14 of the Code of Federal Regulations (14 CFR) within the purview of AFS-1.

(2) Standard Instrument Approach Procedures (SIAP).

(3) Minimum en route altitudes.

(4) Flight procedures policy, operational weather minimums, and minimum equipment requirements.

b. With respect to the functions of subparagraph 11a, final authority is delegated to the Director of AFS-1:

(1) To grant or deny exemptions from rules and regulations.

(2) To issue, amend, withdraw, or extend notices of proposed rulemaking.

13. Special Relations. › f. Flight Procedures and AllWeather Operations. AFS is responsible for…

(3) To take final action on any petition for reconsideration of an amendment, or a refusal to amend operations specifications (OpSpecs), and to take final action on any request for reconsideration of original issuance, amendment, or refusal to issue or amend an airman certificate, air carrier certificate, or an air agency certificate.

(4) To grant or deny exemptions under 49 U.S.C. to foreign airmen who are directly in charge of inspection, maintenance, overhaul or repair of aircraft, aircraft engines, propellers, appliances, or components.

c. The authority of subparagraphs 11a and 11b may not be redelegated.

13. Special Relations.

a. Regulations. AFS is responsible for the substantive content of rules within its purview, as distinguished from the responsibility of the Office of the Chief Counsel (AGC) for the legal adequacy of the rules.

b. Aircraft Noise Abatement. AFS is responsible for developing, recommending, and coordinating national aviation policy relating to environmental and energy matters, including noise and emissions, as distinguished from the Office of Environment and Energy (AEE), which is responsible for the substantive content of rules within its purview.

c. Airworthiness. AFS is responsible for maintenance standards for U.S.-registered aircraft as distinguished from the Aircraft Certification Service’s (AIR) responsibility for the engineering standards and practices, and the manufacturing aspects that are applied to ensure the airworthiness of aircraft and aeronautical products.

d. Rotorcraft. The Rotorcraft Task Force responsibility resides in AFS (Air Transportation Division, AFS-200, and General Aviation and Commercial Division, AFS-800). The service is responsible for rotorcraft operations and maintenance matters. The service will coordinate with the Air Traffic Organization (ATO) on rotorcraft operational matters and with the Associate Administrator for Airports (ARP) on matters relating to heliport programs. The ARP and the ATO, respectively, are responsible for helicopter planning and development, and for integration of rotorcraft into the National Airspace System (NAS) to fully utilize their unique capabilities. The Office of Aviation Policy, Planning, and Environment (AEP) develops the Rotorcraft Master Plan.

e. Airshow and Sport Aviation Activities. AFS will work closely with ATO regarding airshow and other sport aviation matters and will facilitate the consideration of the concerns of the general aviation community in air traffic rules and aviation safety regulatory actions.

f. Flight Procedures and All-Weather Operations. AFS is responsible for developing national concepts, policies, standards, systems, procedures, and programs with respect to the operational and flight technical aspects of all-weather operations, including instrument approach procedures (IAP), minimum en route altitudes, flight procedures, operational weather minimums, and minimum equipment requirements. Also, AFS is responsible for developing concepts, rules, standards, and criteria governing operational and technical aspects of flight procedures (except ATC procedures). These functions are distinguished from the responsibilities of the

14. Office of the Director, AFS-1. › e. Provides leadership and direction in the planning, management, and…

Aviation System Standards (AVN) to implement agency policy, standards, and criteria in the development and standardization of flight procedures and the flight inspection of air navigation facilities. Additionally, AFS, through the Flight Technologies and Procedures Division, AFS-400, provides all necessary oversight for policy, guidance, and work program direction for the RFSD AXX-220 branches to ensure the accomplishment of the assigned task and implementation of national programs. This relationship recognizes that the AXX-220 branches are assigned specific task areas in support of operational safety activities, emergency planning, and unmanned aircraft integration into the NAS. They serve to provide technical assistance and operational safety analysis and are tasked to provide technical responses that represent the AFS position to regional Administrators, airport divisions (regions and airport district offices), ATO, RFSD division managers, and AFS field offices (e.g., International Field Offices (IFO), Flight Standards District Offices (FSDO), certificate management offices (CMO), and Aircraft Evaluation Groups (AEG)).

g. New and Modified Aircraft. AFS and AIR, through the AEGs and the Aircraft Certification Offices (ACO), share responsibility for developing policy, procedures, practices, and standardization related to operational and maintenance acceptability of new and modified manned and unmanned aircraft. This responsibility must be clearly represented by the AEG at the initiation of the aircraft certification process, which is the responsibility of AIR. AFS accomplishes this responsibility through Flight Operations Evaluation Boards (FOEB), Flight Standardization Boards (FSB), and Maintenance Review Boards (MRB).

14. Office of the Director, AFS-1.

a. Advises and assists the Associate Administrator for Aviation Safety (AVS-1) in providing support in the justification of budget estimates, administration of executive decisions, and development and maintenance of productive relationships with the public, the aviation community, and other government agencies.

b. Provides for the development, coordination, and execution of the following, and is accountable to the associate administrator for the adequacy of FAA.

(1) Policies, standards, systems, and procedures.

(2) Public rules, regulations, and standards.

(3) Program plans issued by or on behalf of the Administrator.

c. Provides the effective evaluation of program performance, and ensures the adequacy of follow-up to secure correction of deficiencies.

d. Ensures that all elements of AFS participate constructively in the FAA equal employment opportunity (EEO) Action Plan and in EEO planning for the future.

e. Provides leadership and direction in the planning, management, and control of office activities.

15. Aviation Special Operations and Security Staff (ASOS), AFS-7. › p. Administers the AVS Satellite Telephone Program.

15. Aviation Special Operations and Security Staff (ASOS), AFS-7. AFS-7 supports AVS by providing mission-critical planning and response to aviation emergencies, natural disasters, and aviation-related security matters. The ASOS supports AFS-1 and the AVS management team by performing the following functions:

a. Develops and enforces policies regarding emergency planning and response, and facility security risk management (RM).

b. Developing and continuously updating AVS HQ and regional emergency response plans.

c. Acts as liaison to the AVS management team and AFS regional/field offices regarding security-related incidents, emergency planning, and crisis response.

d. Coordinates all aspects of emergency operations and planning within the AVS community through designated points of contact (POC) within each AVS office at Washington HQ and in the regions.

e. Represents AVS to the Office of Security and Hazardous Materials Safety (ASH) by providing AVS input on all emergency planning and response efforts.

f. Provides support to field personnel involved in law enforcement operations, as necessary.

g. Acts as liaison between AVS and the Transportation Security Administration (TSA) by representing AVS interests in security events involving the flying public, other government agencies, FAA employees, and other security-related aviation incidents in which TSA responds or has a role.

h. Plans and executes exercises to test AVS emergency response plans.

i. Responds appropriately to emergency planning-related tasks from ASH, the Department of Transportation (DOT), the Federal Emergency Management Agency (FEMA), the White House, or other government entities.

j. Participates in FAA- and national-level exercises.

k. Represents AVS at various FAA emergency planning crisis response Working Groups (WG) and teams.

l. Advises AVS senior leadership on crisis response steering groups.

m. Supports AVS activities during emergencies such as natural and man-made disasters, terrorist activities, or pandemics.

n. Coordinates with AVS offices and the FAA’s Pandemic Influenza Coordinator to prepare AVS for a pandemic outbreak.

o. Oversees and participates in the AVS continuity of operations program.

p. Administers the AVS Satellite Telephone Program.

q. Manages the Aviation Safety Inspector (ASI) Credential Program.

16. Executive Officer, AFS-10. › e. Serves as liaison for Congressional hearings and preparation for…

16. Executive Officer, AFS-10. The AFS-10 staff provides program management advice and staff support for the Director. The Executive Officer and AFS-10 are responsible for the following functions:

a. Coordinates and facilitates special projects and reviews across the service, and writes high-level briefings and issue papers on complex, technical programs and initiatives for a variety of audiences, including the Administrator, Congress, high level government officials, and industry.

b. Oversees all confidential matters concerning investigations involving the service including, but not limited to, the Administrator Hotline, Consistency and Standardization Initiative, Government Accountability Office (GAO), DOT Office of the Inspector General (OIG), Office of Special Counsel, FAA Whistleblower Protection Program, and the AFS Internal Assistance Capability; and coordinates such matters directly with the FAA Office of Audit and Evaluation management team and staff on behalf of AFS-1/2 and all AFS division managers and AFS office managers at the HQ, regional, and office levels.

c. Serves as the AVS POC for the Safety Issues Reporting System. Coordinates such matters directly with FAA’s Office of Audit and Evaluation management team and staff on behalf of AVS-1/2 and all AVS service directors, AVS division and directorate managers, and AVS office managers at the HQ, regional, and office levels.

d. Provides organizational guidance and direction to executive managers representing policy and philosophy of the director.

e. Serves as liaison for Congressional hearings and preparation for such hearings.

2/4/13 FS 1100.1C

Figure 1-1. Flight Standards Service Functional Organization Chart

1-10 UNCONTROLLED COPY WHEN DOWNLOADED

Check with FSIMS to verify current version before using

2. Flight Program Oversight Branch. › 4. Evaluation Program Branch.

Chapter 2. Flight Standards Quality Assurance Division, AFS-40

1. Flight Standards (AFS) Quality Assurance (QA) Division, AFS-40. The AFS QA Division is responsible for audits and evaluations of AFS national programs and FAA flight programs and adhering to the policies and practices described in the ISO 9001:2008 standards. The division is responsible for satisfying the International Civil Aviation Organization (ICAO) requirements for quality assurance in Flight Standards Service (AFS).

2. Flight Program Oversight Branch. This branch, AFS-41, is responsible for the following functions:

a. Provides oversight of the FAA Aircraft Management Program and is the Office of Primary Responsibility (OPR) for FAA Order 4040.9, FAA Aircraft Management Program.

b. Conducts external audits or surveillance of individual FAA flight programs in accordance with FAA Order 4040.9.

c. Collects, verifies, consolidates, and reports required FAA Flight Program data.

d. Oversees and manages the FAA’s automated Aircraft Management Information System (AMIS) as defined in FAA Order 4040.9.

3. Quality Management System Branch. This branch, AFS-42, is responsible for the following functions:

a. Supports the responsibilities of AFS-1 identified in Order VS 1300.2B, Aviation Safety (AVS) Quality Management System (QMS) by being the focal point for the implementation and maintenance of the AVS QMS within AFS.

b. Supports AFS-1 with the responsibilities identified in Section 3 of the AVS QMS Quality Policy Manual G-5, Roles and Responsibilities in support of the AVS QMS.

c. Executes the duties of the Service/Office Management Representative for AFS as defined by Section 6 of the AVS QMS Quality Policy Manual G-5, Roles and Responsibilities.

d. Compiles supporting data and facilitates scheduled AFS analysis of data and management review meetings to demonstrate the suitability, adequacy, and effectiveness of the QMS and to evaluate where continual improvement of the QMS can be made.

e. Provides workshops and assistance to offices within AVS through the Lean for Regulators Program.

f. Maintains Data Express and the Flight Standards Automation System (FSAS) for Analysis (TAP) automation programs in support of the AFS safety mission.

4. Evaluation Program Branch. This branch, AFS-43, is responsible for the following functions:

a. Conducts system-based audits using system-based checklists, automated tools, sampling, risk and trend analysis, and best practices.

4. Evaluation Program Branch. › h. Communicates audit findings directly to the Director and to the…

b. Manages the Flight Standards Evaluation Program (FSEP). FSEP conducts independent reviews of AFS programs to recognize and report on internal best practices and to identify systemic weaknesses for corrective action. It promotes standardization by evaluating the adequacy of national policy and/or guidance and adherence thereof and by promoting identified internal best practices. FSEP evaluates AFS processes within AFS, not within the carriers or operators themselves. FSEP was accepted by the International Civil Aviation Organization (ICAO) as satisfying its 1999 Quality Audit System recommendation.

c. Reviews AFS headquarters (HQ) processes at each HQ division, Regional Office (RO), and field office on a 3-year rotational cycle.

d. Conducts rapid assessments of proposed or functional AFS programs and processes, as directed by AFS-1 and assigned by the AFS-40 manager.

e. Measures and reports on the progress of programs, using defined standards and audit criteria, to determine effectiveness in achieving desired results.

f. Provides suggestions for revising programs in response to audit findings.

g. Plans, implements, and records audit procedures and findings and plan accomplishments.

h. Communicates audit findings directly to the Director and to the program, regional, or field office managers, as appropriate.

2. International Affairs Branch. › i. Is responsible for the development and oversight of AFS-related…

Chapter 3. International Programs and Policy Division, AFS-50

1. International Programs and Policy Division, AFS-50. The International Programs and Policy Division is responsible for the management of international activities of the service, including the following functions:

a. Manages the international reimbursable program for agreements and user fees.

b. Develops legislative proposals and rulemaking and provides policy on Title 14 of the Code of Federal Regulations (14 CFR) part 187 issues, and prepares Federal Register (FR) and advisory circular (AC) publications for annual adjustments in fees.

2. International Affairs Branch. This branch, AFS-51, is responsible for the following functions:

a. Serves as the primary point of contact (POC) and develops policy for Flight Standards Service (AFS) international regulatory affairs and technical agreements.

b. Serves as a POC for the European Aviation Safety Agency (EASA), Transport Canada (TC), the International Civil Aviation Organization (ICAO), regional initiatives, the North American Free Trade Agreement (NAFTA), Asia-Pacific Economic Co-operation, and other foreign aviation authorities.

c. Serves as the AFS primary POC for ICAO’s Universal Aviation Safety Oversight Audit Program (USOAP).

d. Initiates notification of U.S. differences to ICAO (obligation in Article 38 of the Chicago Convention) from ICAO Standards and Recommended Practices which relate to AFS responsibilities, when these differences are identified by other appropriate AFS divisions with associated rulemaking responsibilities.

e. Aids in the development, presentation, and execution of technical assistance programs for Foreign Civil Aviation Authorities (FCAA) that have demonstrated deficiencies and have requested such assistance.

f. Coordinates with the Office of the Assistant Administrator for International Aviation on technical assistance and policy and operational issues affecting international aviation operations. Also coordinates with regional international liaison officers and Federal Aviation Administration (FAA) international representatives.

g. Is responsible for the AFS/Aviation Safety (AVS) development and oversight of other government-to-government agreements.

h. Develops, coordinates, and monitors AFS policy regarding other international civil aviation organizations, such as EASA.

i. Is responsible for the development and oversight of AFS-related Bilateral Aviation Safety Agreements (BASA) and associated implementation procedures.

4. International Technical Support Branch. › a. Develops and maintains a pool of skilled AFS technical experts as…

j. Serves as the clearance point for the Inter-Agency Group on International Aviation (IGIA) for purposes of coordinating U.S. positions and strategies, normally for ICAO proposals and events.

k. Maintains records documenting AFS technical assistance and training activities.

l. Prepares reports documenting AFS technical assistance and training activities.

3. International Operations Branch. This branch, AFS-52, is responsible for the following functions:

a. Is responsible for regulations and policy recommendations governing certification and operations aspects of 14 CFR part 129 foreign air operators, including operations specifications (OpSpecs), rulemaking amendments, identification of resulting U.S. differences from ICAO Standards and Recommended Practices, exemption requests, development of guidance materials, and coordination of these activities with other FAA offices; and is responsible for coordinating any National Transportation Safety Board (NTSB) Recommendations and Runway Incursion Program initiatives with part 129 foreign air carriers.

b. Develops and implements agency policy on the International Code-share Safety Audit Program for U.S. air carriers and part 129 foreign air carriers, responds to requests from foreign air carriers for part 129 authorization and/or economic authority under 14 CFR part 375, And coordinates with the Office of the Secretary of Transportation (OST) regarding part 129 and other foreign air carrier operations.

c. Recommends changes to existing information systems such as the National Program Guidelines (NPG), enhanced Vital Information Database (eVID), Program Tracking and Reporting Subsystem (PTRS), Airman Certification and/or Rating Application (ACRA), Webbased Operations Safety System (WebOPSS), etc.

d. Sets guidelines for monitoring foreign air carrier operations and practices, including airport use, establishment or use of dispatch and meteorological facilities, maintenance programs, and minimum equipment lists (MEL).

e. Evaluates results of FAA foreign operator ramp inspections and interfaces with other civil aviation authorities (CAA) on safety inspection matters under the International Aviation Safety Data Exchange (IASDEX) system, and includes coordinating results of ramp inspections conducted by FCAAs on U.S. carriers outside of the United States with other FAA offices.

4. International Technical Support Branch. This branch, AFS-53, is responsible for the following functions:

a. Develops and maintains a pool of skilled AFS technical experts as primary resources for conducting assessments under the international aviation safety assessment program (IASA), technical review, action plan development, supplement technical assistance activities, international training courses, and any other international functions requiring aviation safety technical expertise.

4. International Technical Support Branch. › h. Develops and manages the ICAO model aviation regulatory documents,…

b. Manages and executes IASA, which ensures that all foreign air carriers that seek Department of Transportation (DOT) economic authority to operate to or from the United States, or code-share with U.S. air carrier partners, are properly licensed and have safety oversight provided by a competent CAA in accordance with ICAO standards.

c. Monitors foreign air carrier operations and practices, including airport use, establishment or use of dispatch and meteorological facilities, maintenance programs, and MELs.

d. Performs supplemental inspections of foreign air carriers at airports nationwide with charter and/or scheduled service as an additional support of each field office’s surveillance efforts.

e. Acts as coordinator for requests for aviation safety inspector (ASI) resources from Washington HQ, regional and field offices to support technical assistance activities, international training, technical reviews, IASA, and consultations.

f. Serves as primary contact and develops policy for the IASA program.

g. Serves as course sponsor and mentor for ICAO-endorsed Government Safety Inspection (GSI) training program, and develops policy and guidance in coordination with the Flight Standards Training Division (AFS-500).

h. Develops and manages the ICAO model aviation regulatory documents, consisting of civil aviation law; regulations; implementation of standards for personnel licensing, flight operations, and continuing airworthiness of aircraft; and related technical guidance material.

3. Flight Program Service Center Branch. › f. Providing centralized scheduling of all newhire check rides,…

Chapter 4. Flight Program Division, AFS-60

1. Flight Program Division, AFS-60. The Flight Program Division is responsible for all elements of the Flight Standards Service (AFS) Flight Program, including the safety program, Safety Management System (SMS), operating policy, and financial management. The Flight Program Division is established to provide aviation safety inspectors (ASI) with currency, proficiency, training, and knowledge of aircraft operations, related systems, and safe operation within the National Airspace System (NAS). The divisional office is located at the Fort Worth, Texas Alliance Airport. The manager reports directly to the Deputy Director, Flight Standards Policy Oversight (AFS-2P).

2. Safety Program Officer, AFS-60. The Safety Program Officer is responsible for administering the AFS Safety Program. The branch is responsible for the following functions:

a. Manages the accident/incident notification program.

b. Manages the Internal Evaluation Program (IEP).

c. Serves as a point of contact (POC) for all audits.

d. Manages the SMS.

e. Participates in FAA safety committees.

f. Maintains the Aviation Safety Reporting System (ASRS).

g. Manages and evaluates the Safety Risk Management (RM) program.

h. Serves as the AFS Crew Resource Management (CRM) sponsor.

3. Flight Program Service Center Branch. This branch, AFS-62, is responsible for managing the service center operations. The branch is responsible for the following functions:

a. Establishing service centers to support aircraft operations in support of ASI currency and proficiency flying.

b. Scheduling all operational aspects for ASIs at the service centers.

c. Developing a dispatch center to release FAA aircraft both owned and rented.

d. Providing an automated scheduling process for all service center operations.

e. Analyzing the effectiveness of the Flight Program to ensure it is meeting the needs of the ASIs.

f. Providing centralized scheduling of all new-hire check rides, specialty transition check rides, and all special flight evaluations for General Aviation (GA) and air carrier inspectors.

2. Safety Program Officer, AFS-60. › 6. Standardization Branch.

4. Flight Program Central Administration Branch. This branch, AFS-63, is responsible for managing the centralized administration and recordkeeping of the Flight Program. The branch is responsible for the following functions:

a. Provides centralized management of the Flight Standards Inspector Resource Program (FSIRP).

b. Provides Flight Program participant recordkeeping.

c. Provides Flight Program system of manuals.

d. Develops modern, automated recordkeeping systems.

e. Retains records in accordance with agency directives and policies.

5. Business and Planning Branch. This branch, AFS-64, is responsible for administering the financial, contractual, business and planning activities of AFS-60. The branch is responsible for the following functions:

a. Provides advice, counsel, and program support to division management on management systems, processes, procedures, principles, and methodologies; strategic and tactical planning; matrix and participative management; and program analysis.

b. Develops and implements division policies, programs, processes, and procedures governing administrative, fiscal, and human resource management, and acquisition support including, but not limited to, training requirements, staffing, travel, budget, program planning, and program reporting.

c. Provides administrative management support for documentation control/management (correspondence, records, forms, reports, and directives), contract management and support, general office services, and logistical support.

d. Provides project management support on infrastructure, programs, and initiatives.

e. Monitors the cost accounting system activities for the division and for the national resource program.

f. Acts as the division focal point for administration and currency of information on external communication tools, including the Knowledge Sharing Network (KSN) and division Web site.

g. Prepares and submits reports as required. Serves as the Contracting Officer’s Technical Representative (COTR) or Technical Officer Representative (TOR), as appropriate for national service agreements and contracts.

6. Standardization Branch. This branch, AFS-65, is responsible for administering the aviation operations standards and aircraft maintenance. The branch is responsible for the following functions:

6. Standardization Branch. › g. Provides contractor standardization for all training contractors…

a. Sponsors and assigns the course manager and mentor for the assigned courses:

(1) Airplane Indoctrination.

(2) Light Twin Refresher.

(3) Light Twin Certification (Job Functions Refresher).

(4) Seaplane.

(5) Helicopter Indoctrination.

(6) Helicopter visual flight rules (VFR)/instrument flight rules (IFR).

(7) Helicopter Certification (Job Functions Refresher).

(8) Multiengine Helicopter Familiarization.

(9) Night Vision Goggle (NVG).

(10) Turboprop Initial.

(11) Turboprop Recurrent.

(12) Turboprop Recurrent (Job Functions Refresher).

(13) Balloon.

(14) Glider.

(15) All other courses that may be conducted at the Alliance Airport, Forth Worth, TX or other facility as identified by AFS-60.

b. Provides standardization and quality assurance of all Flight Program flight operations.

c. Provides aircrew and CRM standardization.

d. Performs Title 14 of the Code of Federal Regulations (14 CFR) part 135 certificate operations.

e. Provides aircraft maintenance and quality assurance (QA).

f. Standardizes all new-hire evaluation programs.

g. Provides contractor standardization for all training contractors that are providing instruction to ASIs within AFS.

h. Provides standardized training for contractor and subcontractor instructor pilots.

i. Reviews and recommends changes to syllabi and course revisions as needed.

1. Unmanned Aircraft Systems (UAS) Integration Office, AFS-80. › 2. Management Operations Section.

Chapter 5. Unmanned Aircraft Systems Integration Office, AFS-80

1. Unmanned Aircraft Systems (UAS) Integration Office, AFS-80. The UAS Integration Office is comprised of an executive Integration Office manager, a deputy, and seven individual sections. Collectively, they are responsible for advocating the development of the regulations, policy, and guidance materials which govern UAS operations and the safe integration of UAS into the National Airspace System (NAS). AFS-80 develops standards and requirements for safe operations and training related to existing and emerging UAS technology. It provides direct support for these functions and responsibilities at the field, regional, and Air Traffic Organization (ATO) service area level. AFS-80 also coordinates with other Federal Aviation Administration (FAA) lines of business, ensuring that UAS integration efforts are harmonized, and is responsible for the approval of UAS flight operations within the NAS. AFS-80 is responsible for the following functions:

a. Collaboratively develops operating concepts, policies, requirements, criteria, and procedures for new system evaluations, integration, and implementation of emerging UAS technologies.

b. In collaboration with appropriate policy and procedure owners, identifies requirements, coordinates regulations and supplementary regulatory policy; participates in regulatory review programs; issues grants or denials of Certificates of Waiver or Authorization (COA) and exemptions; and provides guidance for safe operations, training and integration of new UAS flight systems. These collaborative activities will be governed by Service Level Agreements (SLA) with the appropriate policy and procedure owners.

c. Determines research requirements and provides input to UAS research and development (R&D) programs.

d. Provides guidance to divisions, regional offices, and agency organizations regarding the implementation of new and existing UAS technologies; advises on application of agency policies, standards, and procedures as they relate to implementation of new UAS flight technologies and safety enhancement programs in accordance with the provisions of established SLAs.

e. Represents the FAA at domestic and international meetings to further U.S. interests and supports the development of International Civil Aviation Organization (ICAO) standards and recommended practices for UAS flight technologies and procedures.

f. Recommends and coordinates regulatory and policy actions to resolve flight safety problems associated with UAS technologies and procedures as identified through system analysis, accident, incident, or other system reports.

2. Management Operations Section. This section, AFS-82, is responsible for strategic and tactical planning, fiscal and human resource management, personnel travel and training, program management and analysis, information management, and general correspondence and administrative management of the Integration Office. The section is responsible for the following functions:

1. Unmanned Aircraft Systems (UAS) Integration Office, AFS-80. › 4. UAS Safety and Data Management Section.

a. Provides advice, counsel, and program support to the AFS-80 manager and the AFS-80 management team on management systems, processes, procedures, principles and methodologies; strategic and tactical planning; matrix and participative management; and program analysis, evaluation, success metrics, and quality assurance (QA) measures.

b. Develops and implements AFS-80 policies, programs, processes, and procedures governing administrative, information, fiscal, and human resource management.

c. In accordance with established FAA administrative policies and procedures, provides administrative management support for the AFS-80 management team for correspondence control, general paperwork management, financial resource management, contract management, general office services, and logistical support.

d. Serves as AFS-80’s focal point for all external audits and QA assessments of AFS programs.

e. Prepares and submits one-time and recurring informational reports, as required.

f. Ensures the appropriateness, applicability, currency, and periodic revision of AFS-80’s Standard Operating Procedures (SOP), and maintains the AFS-80 Web site (http://www.faa.gov/about/initiatives/uas/).

3. UAS Integration Section. This section, AFS-83, is responsible for strategic planning related to the NAS integration of UAS flight technologies, airspace program management, and analysis. The section is responsible for the following functions:

a. Serves as the focal point for all air traffic coordination required for UAS integration.

b. Participates in the development of air traffic and airspace integration policy, procedures and guidance for UAS flight operations in the NAS with Airspace Services.

c. Initiates appropriate orders and notices to facilitate the air traffic mission regarding the safe integration of UAS flight technologies into the NAS.

d. Ensures participation in RTCA, Inc., the UAS Executive Committee (ExCom) Senior Steering Group (SSG) Working Groups (WG), and other domestic and international WGs, as needed.

e. Coordinates with other AFS-80, Regional, and Field office managers to ensure continuity and harmonization for UAS NAS integration.

f. In collaboration and coordination with all key FAA UAS stakeholders, develops and implements UAS Concept of Operations (CONOPS) and roadmap efforts in compliance with FAA leadership and congressional mandates.

4. UAS Safety and Data Management Section. This section, AFS-84, is responsible for the collection, analysis and reporting of all UAS flight program operational and safety data. This

5. UAS Tactical Operations Section. › b. Provides for and manages the COA process for UASs, monitors COA…

section also supports risk management (RM) initiatives related to UAS integration in the NAS. The section is responsible for the following functions:

a. Ensures that certificate of authorization (COA)/experimental reporting requirements are tailored to ensure that proponent reporting provides data that will support AFS-80 policy and guidance decision-making, ensures that proponents report data in a consistent and timely manner, and ensures that all data reporting requirements have been met prior to renewal of a COA or experimental authorization.

b. Examines all data and conducts appropriate analysis to identify important trends and new operational risks, prepares quarterly reports on all data collected, and provides recommendations for follow-up actions and changes to existing operational mitigations based upon data analysis and trends.

c. Develops, implements, and administers the FAA’s Safety Management System (SMS) for AFS-80, and, directly supports safety RM panels.

d. Manages the UAS accident/incident database/tracking system to ensure that accident/incident reports are properly recorded and monitored until a final conclusion has been reached, and provides recommendations for changes to mitigations and dissemination of information.

e. Reviews accident, incident, and enforcement investigations involving UAS flight operations and recommends appropriate corrective action.

f. Provides dissemination and coordination of information related to all UAS accidents and incidents to the appropriate FAA offices, updates and maintains the AFS-80 Emergency Response Checklist, and collaborates with Accident Investigation, AVP-100, in all investigation activities related to UAS flight operations in the NAS.

g. Coordinates with other AFS-80 managers and key FAA UAS stakeholders to ensure continuity and harmonization for UAS NAS integration.

5. UAS Tactical Operations Section. This section, AFS-85, is responsible for AFS-80 tactical planning, issuance of COAs, implementation of oversight initiatives (including internal and external proponent audits/surveys) COA compliance, process management and analysis, and information management. The section is responsible for the following functions:

a. Performs COA oversight (compliance and monitoring), and ensures that changes to appropriate orders are coordinated with key FAA UAS stakeholders and provides necessary guidance for aviation safety inspectors (ASI) and air traffic control (ATC) specialists to ensure compliance with all general, special, and safety provisions of COAs and special airworthiness certificates in the experimental category.

b. Provides for and manages the COA process for UASs, monitors COA mitigations to ensure they remain effective in providing for appropriate level of operational safety, while not being unnecessarily burdensome on the proponent, and manages relevant program guidance and memoranda of agreement (MOA) to implement the COA process.

6. UAS Airworthiness Section. › c. In coordination with AIR and the Aircraft Evaluation Group, AEG,…

c. Ensures that periodic online updates to COAs represent the current policy and guidance material, and ensures that the COA template is consistent with current guidance and that it facilitates standardization of COAs while providing the opportunity to tailor COAs for unique situations.

d. Ensures that safety mitigations are consistent with the current FAA guidance material for UAS.

e. Provides technical guidance to regional offices (RO), Flight Standards District Offices (FSDO), and field ASIs, and prepares and distributes guidance to ensure that ASIs and ATO specialists receive initial and continuation training for oversight, monitoring, and enforcement responsibilities of UAS operations and the COA process, including the drafting of COA mitigation memoranda.

f. Provides UAS subject matter expertise to the FAA HQ, ROs, and FSDOs as required.

g. Participation in RTCA, UAS ExCom SSG working groups, and other national and international WGs as needed.

h. Ensures that appropriate metrics and databases are maintained concerning issuance of COAs.

i. Coordinates with other AFS-80 managers and key UAS stakeholders to ensure continuity and harmonization for UAS NAS integration.

6. UAS Airworthiness Section. This section, AFS-86, is responsible for planning relative to policy, guidance, and procedures related to certification activities for UASs. This office receives strategic direction on certification aspects from the Aircraft Certification Service (AIR), and develops draft policy and guidance on their behalf. Provides technical oversight of division-sponsored courses for field personnel, and ensures course sponsors and mentors coordinate with the Flight Standards Training Division, AFS-500, to ensure that new and existing courses are accurate and current, and meet AFS objectives and the organization’s needs. The section is responsible for the following functions:

a. Participates as UAS subject matter experts (SME) for standards development organizations such as the American Society for Testing and Materials (ASTM) and RTCA, Inc. that are developing standards for UASs.

b. In coordination with AIR, participates in the development of airworthiness requirements, advisory circulars (AC), technical standard orders (TSO), and other informational guidance to facilitate the certification of the UAS. The issuance of these materials is accomplished by AIR.

c. In coordination with AIR and the Aircraft Evaluation Group, AEG, drafts guidance material to ensure that UAS maintenance and continuing airworthiness actions are properly managed and documented. The issuance of these materials is accomplished by AIR. Develops Flight Standards Inspector Guidance and orders to include: oversight of operators’ maintenance programs, records, etc.; to include investigations and enforcement; development of Job Task Items (JTI) for UAS inspections; working with Regional Automated Modular Planning Software

7. UAS Flight Operations Section. › f. Is responsible for developing and maintaining the AFS-80 Handbook,…

(RAMPS) to include required inspections to the National Work Program Guidelines (NPG), and assurance of completion of enhanced Vital Information Database (eVID) updates.

d. Ensures that UAS ICAO guidance material is consistent with FAA plans and criteria, and promotes international acceptance of U.S. certification standards.

e. Provides engineering support and analysis to help evaluate UAS applicants for special airworthiness certification in the experimental category.

f. Coordinate with other AFS-80 managers and key FAA UAS stakeholders to ensure continuity and harmonization for UAS NAS integration.

7. UAS Flight Operations Section. This section, AFS-87, is responsible for the overall standardization and safety of UAS flight operations, AFS-87 provides regulations, policies, guidance, and other information necessary for safe UAS training and operations, and provides standards for training and certification of UAS flightcrew members. It also collaborates with the UAS community to ensure that best practices for flight operations are provided. AFS-87 is the principal directing element within AFS-80 for the direction, control, and execution of all aspects of UAS flight operations. The section is responsible for the following functions:

a. Provides operational guidance to proponents, the FAA regions and FSDOs, and other elements of the agency on all operational aspects of UAS flight operations with emphasis on safety RM, and supports other government agencies, the industry, and international aeronautics organizations on all matter related to UAS flight operations.

b. Provides flightcrew member certification, licensing and medical requirements; develops a certification path for UAS flightcrew members consistent with Title 14 of the Code of Federal Regulations (14 CFR) part 61; works in collaboration with FAA aeromedical representatives to provide for reasonable medical certification requirements; and establishes training standards and testing protocols for the certification and licensing of flightcrew members.

c. Provides policies and standardized procedures for UAS flight program management and administration, and reviews and updates COA safety mitigations to ensure that adequate safety margins are maintained while not being overly burdensome.

d. Provides international harmonization, ensures that operational processes and flight program management for UAS are consistent with ICAO guidance material, and participates as SMEs for standards development organizations.

e. Supports rulemaking initiatives to provide enhanced operational safety and standards for UAS flight operations, and initiates rulemaking activities to ensure that new and unique crewmember positions are covered in part 61.

f. Is responsible for developing and maintaining the AFS-80 Handbook, which will provide policies and procedures for UAS flight operation, program management implementation, and associated subjects; and provides subject matter expertise to the Mike Monroney Aeronautical Center (MMAC) for educational modules related to UAS operations.

8. UAS Research and Development (R&D) Section. › f. Incorporates other FAA lines of business (LOB) needs into R&D…

g. Participates in RTCA, Inc., UAS ExCom SSG WGs, and other national and international WGs, as needed.

h. Coordinates with other AFS-80 managers and key FAA UAS stakeholders to ensure continuity and harmonization for UAS NAS integration.

8. UAS Research and Development (R&D) Section. This section, AFS-88, is responsible for strategic planning and direct support of continued UAS R&D. It also provides input on requests for research required for advanced mitigations. The section is responsible for the following functions:

a. Identifies all R&D needs for the safe integration of UAS into the NAS, coordinates with appropriate Next Generation (NextGen) offices to ensure that needed research activities are accomplished, and identifies areas of research within the UAS community where efforts can be leveraged.

b. Ensures that R&D activities account for integration of UAS into the NAS as it evolves under NextGen.

c. Serves as the focal point for development of R&D programs related to UAS operations.

d. Organizes and leads a Technical Community Research Group (TCRG) for the purpose of identifying research activities to facilitate rulemaking and certification efforts in support of UAS flight operations.

e. Coordinates with other AFS-80 managers to ensure continuity and harmonization for UAS NAS integration.

f. Incorporates other FAA lines of business (LOB) needs into R&D activities to ensure NAS integration.

3. Financial Resources Management Branch. › d. Conducts periodic spending reviews and oversight of AFS budget…

Chapter 6. Organizational Resources and Program Management Division,

AFS-100

1. Organizational Resources and Program Management Division, AFS-100. The Organizational Resources and Program Management Division is responsible for the formulation and execution of the Flight Standards Service (AFS) operational budget and staffing allocations. It provides national strategic and tactical planning, fiscal and human resource management, management analysis, organizational design and standardization, information management, administrative management, and health and safety programs. The division is also responsible for Aviation Safety’s (AVS) facilities and equipment (F&E) budget formulation and supports the AVS Research, Engineering, and Development (R,E&D) budget formulation. In addition, the division provides Geographic Information System (GIS) services for capital investment and organizational operations decision-making.

2. Administrative Resources Branch. This branch, AFS-110, ensures consistent application of policies and guidance in administrative program areas. This branch is responsible for the coordination of AFS telework, drug/alcohol, voluntary leave donor, training, and development programs. In addition, AFS-110 manages the AFS Occupational Safety and Health Administration (OSHA), Employee Recognition and Superior Contribution Increase (SCI) programs. This branch is also responsible for the following functions:

a. Serves as the program manager for equal employee opportunity (EEO) programs and provides guidance and assistance to AFS offices.

b. Coordinates and provides telephonic communications, space, and logistics services to AFS headquarters (HQ) offices.

c. Tracks and maintains records on employee code of ethics requirements and financial disclosure statements.

d. Coordinates and processes AFS HQ incentive awards.

e. Serves as the focal point for all AFS years of service certificates and pins.

3. Financial Resources Management Branch. This branch, AFS-120, is responsible for the budget execution of AFS operations and AVS F&E appropriations and other fiscal management work activities. The branch is responsible for the following functions:

a. Executes the AFS operations budget and develops budget policy and guidelines for HQ and regional divisions.

b. Manages Personnel Compensation and Benefits (PC&B) policy and utilization for AFS.

c. Executes the AVS F&E budget and develops budget policy and guidelines for HQ and regional divisions.

d. Conducts periodic spending reviews and oversight of AFS budget resources in the operations account.

5. Technical Information and Communications Programs Branch. › e. Produces and maintains AFS directive and AC legal case files.

e. Conducts periodic spending reviews and oversight of AVS F&E budget resources.

f. Provides guidelines to AFS HQ and Regional Offices (RO) for agency financial systems that impact fiscal management.

g. Conducts periodic reviews of financial management processes in AFS.

h. Provides contract and procurement oversight for AFS HQ offices.

4. Human Capital Resource Management Branch. This branch, AFS-130, ensures that human resource management policy and guidance are provided to AFS HQ and regional divisions. This branch has the overall responsibility for providing technical direction and oversight in all areas of the human capital resource. It manages the recruitment and hiring for AFS; coordinates the security clearances for AFS employees according to agency policy and guidance; and provides guidance and assistance to offices regarding employee conduct and discipline. The branch is also responsible for the following functions:

a. Manages and oversees the accountability board complaints for AFS at the national level.

b. Provides guidance on the Core Compensation Programs.

c. Oversees executive programs/incentives for AFS HQ and regional executives.

5. Technical Information and Communications Programs Branch. This branch, AFS-140, ensures quality and consistent application of the AFS Directive and Advisory Circular (AC) Production Process, AFS-100-001, and supports the AFS Directive Management Officer (DMO) position. This branch is responsible for the control and coordination of AFS executive correspondence, the AFS Freedom of Information Act (FOIA) program, the National Transportation Security Board (NTSB) and FAA Safety Recommendation Program, and AFS Department of Transportation (DOT) Office of the Inspector General (OIG) and Government Accountability Office (GAO) reporting. In addition, AFS-140 manages the AFS Web Program, provides AFS Internet and Intranet development and support, and coordinates AFS-wide SharePoint activities. The branch is also responsible for the following functions:

a. Serves as AFS Records Management Officer and provides guidance and assistance to AFS offices on records management activities.

b. Serves as AFS Forms Officer, and provides guidance and assistance to AFS offices on AFS form-related activities.

c. Responds to public inquiries received through www.faa.gov in accordance with agency guidelines.

d. Serves as the Contracting Officer’s Technical Representative (COTR) for the AFS Technical Writing Contractors.

e. Produces and maintains AFS directive and AC legal case files.

8. AFS (AVS) Staffing Tool and Reporting System (ASTARS) Branch. › f. Serves as the AFS POC for Federal Activity Inventory Review Act…

f. Coordinates the Flight Standards Information Management System (FSIMS) feedback program.

6. New Technology Development Branch. This branch, AFS-150, is responsible for AVS’s F&E program and is the lead for the annual AVS F&E budget formulation to include AVS input to the 5-year Capital Investment Plan (CIP). In addition, AFS-150 supports development of AFS R,E&D projects and supports AVS R,E&D budget formulation. AFS-150 also provides GIS services for capital investment and organizational operations decision-making. The branch is also responsible for the following functions:

a. Provides ISO-9001 quality divisional oversight and serves as focal point for AFS-100 Quality Management System (QMS) activities.

b. Serves as a COTR on select AFS support contracts.

c. Supports AVS acquisition management system (AMS) activities, as required.

7. Planning and Performance Management Branch. This branch, AFS-160, provides planning and performance management functions for AFS. The branch is responsible for the following functions:

a. Develops an AFS annual performance plan and quarterly accomplishment reports.

b. Provides guidance on development of performance goals and targets.

c. Formulates and justifies the AFS operations budget.

d. Serves as the focal point on organizational changes/issues for AFS HQ and regions, and is responsible for control, revalidation, and revision of Order FS 1100.1.

8. AFS (AVS) Staffing Tool and Reporting System (ASTARS) Branch. This branch, AFS-170, has the overall responsibility for providing technical direction and oversight of the ASTARS. The branch is also responsible for the following functions:

a. Serves as the national AFS Labor Distribution Reporting (LDR) Quality Assurance (QA) Representative.

b. Serves as the AFS Report, Analysis, and Distribution System (RADS) Administrator.

c. Serves as COTR on the AVS ASTARS contract.

d. Manages established staffing targets, develops staffing reports, and tracks data.

e. Serves as the AFS point of contact (POC) for the AVS Workforce Plan.

f. Serves as the AFS POC for Federal Activity Inventory Review Act activities.

b. With respect to the foregoing, the division: › (10) Oversees development and maintenance of aircraft simulator and…

Chapter 7. Air Transportation Division, AFS-200

1. Air Transportation Division, AFS-200. This division:

a. Is responsible for regulations and policy recommendations governing certification and operations aspects of air carriers; air agencies (aircraft dispatcher, flight engineer, and flight navigator-approved schools); and air carrier airmen (aircraft dispatchers and flight navigators) and crewmembers (pilots and flight attendants). This division is also responsible for management and oversight of the National Simulator Program (NSP) and air carrier insurance certification function.

b. With respect to the foregoing, the division:

(1) Develops and recommends national policies, standards, systems, procedures, and program plans.

(2) Determines the need for, justifies, and formulates new or amended Code of Federal Regulations (CFR) parts, or supplementary regulatory material; in collaboration with field offices, provides the technical analysis for grants or denials of exemption; reviews and approves deviations in accordance with current FAA policy; participates in regulatory review program; develops operations specifications (OpSpecs); and provides team leads or team members for Agency rulemaking projects.

(3) Advises the Director, the Associate Administrator, and other principal officials, and serves as a point of contact (POC) for the aviation community on matters related to its program areas at the national level.

(4) Promotes standardization through the analysis and evaluation of the field execution of programs and analyzes and evaluates the effectiveness of division policy.

(5) Determines the need for and sponsors research and development (R&D) projects.

(6) Guides and assists the other divisions, the regions, and other elements of the agency in the conduct of the related programs; and provides guidance on applying agency policies, standards, and procedures pertaining to current safety issues.

(7) Develops, coordinates, and issues national directives to provide technical guidance on policies and procedures, and publishes all agency Safety Alerts For Operators (SAFO)/Information For Operators (InFO).

(8) Develops operating requirements and technical standards.

(9) Initiates, recommends and coordinates actions to resolve safety problems resulting from accidents and incidents.

(10) Oversees development and maintenance of aircraft simulator and flight training device (FTD) qualification standards and criteria.

2. National Simulator Program (NSP). › g. Provides assistance in the exercise of authority and responsibility…

(11) Analyzes recommendations and prepares technical responses to National Transportation Safety Board (NTSB) and FAA safety recommendations.

(12) Provides direction and support to the Regulatory Support Division, AFS-600, regarding AFS-200 areas of responsibility as they relate to defining and managing delegation programs, regulations, policies and procedures.

(13) Provides technical assistance to the International Civil Aviation Organization (ICAO) and other international organizations on operational issues related to part 121 air carriers.

c. Develops, coordinates, and recommends career development programs to ensure organizational competency for employees in the division.

2. National Simulator Program (NSP). This program, AFS-205, consists of personnel trained as simulator evaluation specialists and simulator engineers. The NSP is responsible for setting criteria and standards for initial qualification and conduct of continuing qualification evaluation for aircraft, rotorcraft, and powered-lift flight simulation training devices (FSTD). The NSP is also responsible for initial and recurrent evaluations of level 6 and 7 FTDs. The NSP provides initial evaluation of reference data for level 4 and 5 FTDs, if required, and provides technical assistance to the Flight Standards District Office (FSDO) that has responsibility for approval of the FTDs. The NSP develops criteria, guidance, and standards for the qualification and conduct of evaluations for FSTDs; conducts initial, continued qualification, additional and non-scheduled evaluations of level A through D simulators and level 6 and Level 7 FTDs; provides guidance and oversight of level 4 and level 5 FTDs; and designates simulator evaluation specialists to serve as operations members and active participants on Flight Standardization Boards (FSB) and Flight Operations Evaluation Boards (FOEB). The branch is responsible for the following functions:

a. Plans, directs, and controls the activities of the NSP.

b. Develops, recommends, and monitors national policy, standards, procedures, and program plans relating to FSTDs.

c. Ensures the performance, as defined in Title 14 of the Code of Federal Regulations (14 CFR) part 60, of all required regulatory functions.

d. Ensures the proper programming and maintenance of applicable FSTDs, and that they replicate the respective aircraft.

e. Conducts initial, continuing, and other qualification evaluations of aircraft simulators and level 6 and level 7 FTDs used in FAA-approved training programs.

f. Conducts required Quality Management System (QMS) audits of FSTD sponsors.

g. Provides assistance in the exercise of authority and responsibility of the NSP, including development and, as appropriate, implementation of special studies, programs, Bilateral Aviation Safety Agreements (BASA)/Simulator Implementation Procedures (SIP), or other related projects.

3. Part 121 Air Carrier Operations Branch. › h. Functions as the division focal point for matters pertaining to 14…

h. Participates in FSB and FOEB meetings, as appropriate.

i. Reports to the division manager and serves as the national focal point for all matters pertaining to the functions and responsibilities of the NSP.

j. Develops and administers all policy matters, directives, and advisory material relating to FSTD standards for evaluation and qualification.

k. Recommends and initiates rulemaking related to simulators and FTDs.

l. Responsible for development and course mentoring of FSTD Evaluation Courses.

m. Keeps the Director, AFS-1 informed regarding all NSP activities.

3. Part 121 Air Carrier Operations Branch. This branch, AFS-220, is responsible for managing, developing, and evaluating operational policies and guidance for air carrier operations aspects of 14 CFR parts 63 and 65 (with respect to flight engineers, flight navigators, and aircraft dispatchers), and part 121. This branch also participates in the Crisis Response Working Group (WG) and the Commercial Aviation Safety Team (CAST). The branch is responsible for the following functions:

a. Evaluates current regulations and assists with the development of new regulations and amendments to existing regulations in the functional areas described above.

b. Drafts and reviews applicable additions and changes to agency guidance which pertains to crewmembers (pilots and Flight Attendants (F/A)), Flight Engineers (FE), flight navigators, and aircraft dispatchers in part 121 operations.

c. Develops operations policy for pilots, FEs, flight navigators, F/As and aircraft dispatchers in part 121 operations.

d. Provides operational support in implementing operations policy and regulations for part 121 operators.

e. Meets and coordinates with the aviation community and other operating segments of the FAA on matters within its areas of responsibility.

f. Develops policy and provides technical assistance on issues regarding part 121 air carrier operations.

g. Provides technical assistance to internal and external stakeholders on part 121 air carrier operations, including flight operations, dispatch, cabin safety issues and passenger handling issues.

h. Functions as the division focal point for matters pertaining to 14 CFR part 139 and the certification of airports, and evaluates requests for revision to the list of special pilot in command (PIC) qualification airports.

i. Functions as the division focal point for matters relating to the Extended Operations (ETOPS) program, and develops and implements policy related to ETOPS.

4. New Program Implementation Branch. › j. Consults with and advises district and regional offices on the…

j. Evaluates requests for flight deck access in accordance with current FAA policy.

k. Serves as division liaison to the Crisis Response WG.

l. Serves as the division liaison to the CAST.

4. New Program Implementation Branch. This branch, AFS-240, is responsible for managing, developing, and evaluating national standards and policies, rules, and exemptions for integrating new programs and initiatives into air carrier operations and part 142 training centers in coordination with the relevant policy division. The branch is responsible for the following functions:

a. Liaises with other branches pertaining to the implementation of Next Generation (NextGen) policy and the associated operational and training considerations.

b. Functions as the division liaison to other FAA offices on issues supporting the implementation of NextGen for air carrier and part 142 training centers.

c. Functions as the division liaison to the other lines of business (LOB) and local and international government entities on issues relating to unauthorized illumination of aircraft with lasers, the associated hazards, mitigation efforts and outreach programs.

d. Develops policy and liaises with the Aircraft Evaluation Group (AEG) who administers the program for the FSBs, which develop training requirements for new aircraft to be operated by U.S. operators.

e. Develops policy and liaises with the AEG who conduct FOEBs, which develop Master Minimum Equipment Lists (MMEL) for aircraft.

f. Develops policy for the MMEL program while liaising with AEG, operators, maintenance personnel, and co-chairs the MMEL industry group.

g. Coordinates with divisional branches to provide policy guidance on the approval process of minimum equipment lists (MEL) and the administration of the MEL program.

h. Meets and liaises coordinates with the aviation community and other operating segments of the FAA on matters within its areas of responsibility.

i. Provides technical assistance to the International Civil Aviation Organization (ICAO) and other international organizations regarding the integrating of new programs and initiatives affecting air carriers.

j. Consults with and advises district and regional offices on the aspects of NextGen and associated program implementation for air carriers and training centers.

6. Technical Programs Branch. › a. Functions as the AFS focal point for all operations specifications…

k. Collaborates with AFS-400 in the proof of concept evaluations for new technologies and associated operational safety assessments impacting air carriers and training centers.

l. Participates in various FAA and industry task forces, forums, and committees related to matters of within its areas of responsibility.

5. Part 135 Air Carrier Operations Branch. This branch, AFS-250, is responsible for the principal element of the division with respect to managing, developing, and evaluating national standards and policies and processing or amending rules or exemptions related to 14 CFR part 135 on-demand and commuter operations, including fixed-wing and helicopter operations, helicopter air ambulance operations, cargo operations, and all commercial air tour operations. The branch is responsible for the following functions:

a. Evaluates current regulations and assists with the development of new regulations and amendments to existing regulations in the functional areas described above.

b. Drafts and reviews applicable additions and changes to agency guidance pertaining to part 135 operations.

c. Develops operations policy for part 135 operations.

d. Provides operational support in implementing operations policy and regulations for part 135 operators.

e. Meets and coordinates with the aviation community and other operating segments of the FAA on matters within its areas of responsibility.

f. Collaborates with other HQ organizations when considering proposed changes to regulations or agency guidance with respect to part 135 operations.

g. Provides technical assistance to internal and external stakeholders on part 135 certification, operations and surveillance policy.

h. Consults with and advises district offices and regions concerning the operational aspects of new or amended rules and exemptions related to assigned program areas.

i. Provides technical assistance to ICAO and other international organizations on issues regarding part 135 operations.

6. Technical Programs Branch. This branch, AFS-260, is responsible for the management of division automations and the policy associated with the web-based Operations Safety System (WebOPSS), AEG functions and air carrier insurance. The branch is responsible for the following functions:

a. Functions as the AFS focal point for all operations specifications (OpSpecs) issues and other authorizations available in the WebOPSS.

7. Policy Integration Branch. › g. Monitors and reports on status of division projects and facilitates…

b. Facilitates and co-chairs quarterly meetings of the Operations Specifications Working Group (OSWG).

c. Develops policy related to WebOPSS and facilitates the dissemination of changes and reference materials for OpSpecs and other authorizations in WebOPSS.

d. Coordinates with field personnel and industry to ensure standardization and acceptability in standard and nonstandard paragraph policy issues for OpSpecs and other authorizations.

e. Maintains part 298 economic authority records for commuter and on-demand air carriers and associated policy.

f. Develops policy related to the Insurance and Exemption modules of WebOPSS and the AEG System.

g. In collaboration with the Office of Quality, Integration, & Executive Services (AQS), designs, develops, implements, and operates electronic data acquisition systems employed for the collection, analysis, archiving, and distribution of safety-related data in division automation programs.

h. Participates in various FAA and industry task forces, forums, and committees.

7. Policy Integration Branch. This branch, AFS-270, is responsible for managing specific programs within the division, including public rulemaking, safety recommendations, quick response, and external audits. This branch is also responsible for overseeing the division’s international activities and management of the division work process. The branch is responsible for the following functions:

a. Manages division regulatory and exemption activities.

b. Coordinates and prepares division responses to requests for briefing documents from internal and external stakeholders.

c. Coordinates and prepares division responses to NTSB and FAA safety recommendations.

d. Coordinates and prepares division responses to external audits, such as audits conducted by the Government Accountability Office (GAO) or Office of the Inspector General (OIG).

e. Serves as the division liaison to AFS-50.

f. Manages division international activities, including participation in meetings and WGs, and providing technical assistance, as needed, and maintains a high level of awareness of current international aviation activities.

g. Monitors and reports on status of division projects and facilitates coordination between potentially affected stakeholders, both internal and external to the division.

8. Air Carrier Training Systems and Voluntary Safety Programs Branch. › k. Plans, directs, controls, and evaluates voluntary safety and other…

h. Develops and implements national policy to integrate air carrier Safety Management Systems (SMS), in coordination with the appropriate AFS divisions.

8. Air Carrier Training Systems and Voluntary Safety Programs Branch. This branch, AFS-280, is responsible for managing, directing, and evaluating national standards, policies, and procedures relating to 14 CFR parts 121, 135, and 142 training and qualification for crewmembers, aircraft dispatchers, and certain other operations personnel. This branch is responsible for all matters and business processes pertaining to the development and execution of the Advanced Qualification Program (AQP), the Flight Operational Quality Assurance (FOQA) Program, the Aviation Safety Action Program (ASAP), the Voluntary Disclosure Reporting Program (VDRP), the Aviation Safety Reporting System (ASRS), the Internal Evaluation Program (IEP), and guidance materials for the Line Operations Safety Audit (LOSA) Program. The branch is responsible for the following functions:

a. Evaluates current regulations and assists with the development of new regulations and amendments to existing regulations in the functional areas described above.

b. Drafts and reviews applicable additions and changes to agency guidance which pertains to training and certification of airmen and crewmembers, operations of part 142 training centers, and other assigned programs.

c. Develops national policies for air carrier training, part 142, and voluntary safety programs for pilots, F/As, aircraft dispatchers, and certain other operations personnel.

d. Provides operational support in implementing training policy and regulations.

e. Collaborates with other HQ organizations when considering proposed changes to regulations or agency guidance with respect to the testing and certification of airmen, operations of part 142 training centers, and voluntary safety programs.

f. Develops policy and provides technical assistance on issues regarding operations of flight simulation devices used by air carriers and part 142 training centers.

g. Provides technical assistance to internal and external stakeholders on air carrier training, part 142 training center certification, and voluntary safety program operations and surveillance policy.

h. Develops training specifications (TSpec) for part 142 training centers.

i. Determines the need for and justification of the development of ground instructor and flight instructor qualification requirements, as they pertain to part 142 training.

j. Provides technical assistance to ICAO and other international organizations on issues regarding aircrew training and use of part 142 training centers.

k. Plans, directs, controls, and evaluates voluntary safety and other programs, as assigned.

9. Program Management Support Branch. › c. Provides administrative management support for the division’s…

l. Meets and coordinates with the aviation community and other operating segments of the FAA on matters within its areas of responsibility, and sponsors and conducts periodic conferences and seminars to educate industry, labor, and the public on current developments in assigned programs.

m. Maintains the content of FAA Web sites for assigned programs.

n. In collaboration with the Office of Quality, Integration, & Executive Services (AQS), designs, develops, implements, and operates electronic data acquisition systems employed for the collection, analysis, archiving, and distribution of safety-related data in assigned programs.

o. Receives data from both ground-based training/checking activities and airborne line operations; conducts analysis of such data to validate air operations personnel proficiency requirements, training and qualification program effectiveness, and associated regulatory provisions; establishes data-driven quality control procedures for the qualification and certification of crewmembers, dispatchers, and certain other operations personnel; and distributes data and reports to FAA field offices and program participants.

p. Identifies AFS-200 human factors research requirements, prepares necessary initiating documentation, coordinates project implementation, and provides technical oversight of in-house studies, contracts, and grants for air transportation human factors research. Interfaces directly with the FAA and other research and development (R&D) organizations to perform such functions.

q. Recommends and evaluates new technology for use in aviation training and voluntary safety programs.

r. Conducts on-site program reviews for AQP and ASAP.

9. Program Management Support Branch. This branch, AFS-290, is responsible for strategic and tactical planning, fiscal and human resource management, program management and analysis, information management, and general administrative management of the division. The branch is responsible for the following functions:

a. Provides advice, counsel, and program support to division management on management systems, processes, procedures, principles, and methodologies; strategic and tactical planning; matrix and participative management; and program analysis, evaluation, success metrics, and quality assurance (QA) measures.

b. Develops and implements division policies, programs, processes, and procedures governing administrative, fiscal, and human resource management, including, but not limited to, time and attendance data entry, training requirements, travel, budget, program planning, and program reporting.

c. Provides administrative management support for the division’s management team for general paperwork management (correspondence, records, forms, reports, directives), contract management and support, general office services, and logistical support.

d. Monitors and reports on the progress of responses for White House Reports, requests under the FOIA, and the Government Performance and Results Act.

9. Program Management Support Branch. › j. Provides technical oversight of division-sponsored courses for field…

e. Monitors the cost accounting system/labor distribution reporting (LDR) activities for the division.

f. Manages the production of all division publications, including those on FSIMS.

g. Acts as the division focal point for matters pertaining to knowledge sharing network and SharePoint management and input.

h. Serves as the division’s focal point for QMS activities.

i. Prepares and submits one-time and recurring informational reports as required.

j. Provides technical oversight of division-sponsored courses for field personnel, and ensures course sponsors and mentors coordinate with the Flight Standards Training Division, AFS-500, to ensure that new and existing courses are accurate, are kept current, and meet AFS objectives and the organization’s needs.

3. Special Programs Branch. › d. Acts as a focal point for incoming National Transportation Safety…

Chapter 8. Aircraft Maintenance Division, AFS-300

1. Aircraft Maintenance Division, AFS-300. This division is responsible for developing and standardizing the regulations, national directives, policy procedures, and advisory material governing the certification, inspection, and surveillance, to ensure the airworthiness of civil aircraft, of the maintenance aspects for General Aviation (GA); air carrier and commercial operators; airmen (mechanics, repairmen, and parachute riggers); avionics; and air agencies (Aviation Maintenance Technician Schools (AMTS) and repair stations).

2. Program Management and Information Branch. This branch, AFS-310, is responsible for the following functions;

a. Directs and oversees AFS-300’s fiscal and human resources.

b. Acts as a focal point for administrative service areas of personnel management, training, organization, staffing, tracking systems, and related programs.

c. Develops, executes, and monitors the AFS-300 business plan, including responses for Dashboard and performance planning.

d. Provides project tracking for AFS-300 correspondence, directives, and achievements.

e. Coordinates the development/issuance of AFS-300’s national policy directives, bulletins, and advisory circulars (AC).

f. Acts as a focal point for AFS-300 incoming Freedom of Information Act (FOIA) requests.

g. Acts as a focal point for the aviation education program.

3. Special Programs Branch. This branch, AFS-320, is responsible for the following functions:

a. Provides technical assistance and support for special programs, such as rulemaking projects, damage-tolerance (DT), Repair Assessment Programs (RAP), Corrosion Prevention and Control Programs (CPCP), Structural Maintenance Programs, and nondestructive inspection (NDI).

b. Provides technical support and guidance in the development of regulations and national guidance in this area of responsibility.

c. Sponsors and provide oversight of safety and educational programs related to its area of specialization for aging aircraft rulemaking projects.

d. Acts as a focal point for incoming National Transportation Safety Board (NTSB) safety recommendations.

e. Coordinates with the Flight Standards Training Division, AFS-500, to ensure that new and existing courses are accurate, kept current, and meet AFS objectives and the organization’s needs.

5. Repair Station Branch. › b. Develops, evaluates, and implements Bilateral Aviation Safety…

f. Coordinates and tracks regulatory activities for AFS with the Office of Rulemaking (ARM), the Office of the Chief Council (AGC), and other FAA elements.

g. Functions as the technical liaison to Aircraft Certification Service (AIR).

h. Functions as the division liaison to the International Programs and Policy Division, AFS-50.

4. Air Carrier Maintenance Branch. This branch, AFS-330, is responsible for the following functions:

a. Develops regulations and standardizes national guidance on maintenance for Title 14 of the Code of Federal Regulations (14 CFR) parts 91 subpart K (91K), 119, 121, 125, 129 and 135.

b. Evaluates and responds to petitions for exemption and rulemaking for parts 91K, 119, 121, 125, 129, and 135 as related to branch functions.

c. Provides technical assistance to other FAA elements, other Government agencies, industry, and Foreign Civil Aviation Authorities (FCAA) on all operational and technical facets of air carrier maintenance.

d. Sponsors and provides oversight of safety and educational programs related to its area of specialization for air carrier aircraft, including determining the criteria for maintenance training for field personnel.

e. Represents AFS-300 in the development of international standards and recommended practices for the International Civil Aviation Organization (ICAO).

f. Is responsible for policy relating to the Service Difficulty Reporting (SDR) and Mechanical Interruption Summary (MIS) reporting, as related to parts 119, 121, 125, and 135 carriers.

g. Acts as a focal point for the development/implementation of operations specifications (OpSpecs) Working Groups (WG).

h. Acts as a focal point for human factors in aviation maintenance.

5. Repair Station Branch. This branch, AFS-340, is responsible for the following functions:

a. Develops, evaluates, and implements all standards and program policies regarding FAA-certificated repair stations.

b. Develops, evaluates, and implements Bilateral Aviation Safety Agreements (BASA)/Maintenance Implementation Procedures (MIP) agreements with FCAAs.

6. General Aviation Branch. › g. Provides technical guidance to the other divisions, the regions, and…

c. Serves as the contact office between the FAA and the Transportation Security Administration (TSA) for issues with FAA-certificated repair stations outside the United States.

d. Coordinates division policy that impacts FAA-certificated repair station surveillance and data gathering with the National Field Office, AFS-900.

e. Provides technical assistance and guidance concerning FAA-certificated repair stations to other elements of the FAA, other government agencies, and national and international industry organizations.

f. Evaluates and recommends grant or denial of petitions for exemption to 14 CFR part 145.

g. Initiates rulemaking for part 145, and participates in other rulemaking that may impact FAA-certificated repair stations.

h. Sponsors FAA technical training related to repair stations, and coordinates with AFS-500 to ensure course currency.

i. Coordinates division policy concerning FAA-certificated repair stations outside the United States with AFS-50.

j. Provides division support for development and implementation of repair station Safety Assurance System (SAS) component of Safety Management Systems (SMS).

6. General Aviation Branch. This branch, AFS-350, is responsible for the following functions:

a. Develops regulations and standardizes national guidance for airmen, including mechanic certificates, repairman certificates, inspection authorizations, and parachute riggers, relating to 14 CFR parts 65, 103, 105, 133, 137, and 147.

b. Develops regulations and standardizes national guidance for AMTSs.

c. Coordinates with AFS-500 to ensure that new and existing courses are accurate, kept current, and meet AFS objectives and the organization’s needs.

d. Develops regulations and standardizes national guidance for GA maintenance operations under 14 CFR parts 43 and 91.

e. Develops, implements, and evaluates procedures, policies, and programs for the maintenance, alteration, and airworthiness of aircraft used by pilot schools, external-load, special purpose, agriculture, and light sport aircraft operators.

f. Acts as a focal point for GA functions concerning maintenance regulatory aspects of 14 CFR parts 21, 23, 25, 27, and 29 regarding data approvals for repairs and alterations.

g. Provides technical guidance to the other divisions, the regions, and the other elements of the agency on all operational and technical facets of GA.

7. Avionics Branch. › g. Coordinates and tracks regulatory activities as they relate to…

h. Coordinates course sponsors and mentors with AFS-500 to ensure that new and existing courses are accurate, kept current, and meet AFS objectives and the organization’s needs.

i. Acts as focal point for the Suspected Unapproved Parts (SUP) Program, including policy and coordination with AIR.

j. Provides direction and support to AFS-600 regarding AFS-300 areas of responsibility as they relate to defining and managing delegation programs, regulations, policies and procedures.

7. Avionics Branch. This branch, AFS-360, is responsible for the following functions:

a. Provides support and coordinates all avionics, radio, instrument and electrical systems policy within the division.

b. Provides technical assistance to other FAA elements, other government agencies, industry, and international aeronautics organizations on all operational and technical facets of avionics, radio, instruments, and electrical systems.

c. Coordinates policy concerning new and emerging technologies as they relate to avionics, radio, instruments, and electrical systems with AFS-400.

d. Is responsible for policy and guidance for large/small aircraft and operating certificate holders under parts 91, 121, 125, 129, 133, 135, 136, and 137 for avionics, radio, instruments, and electrical systems.

e. Provides technical assistance and guidance to other agency elements concerning the regulatory aspects of avionics, radio, instruments, and electrical system maintenance, inspection, alteration, and repair.

f. Coordinates with AFS-500 to ensure that new and existing courses are accurate, kept current, and meet AFS objectives and the organization’s needs.

g. Coordinates and tracks regulatory activities as they relate to avionics, radio, instruments, and electrical systems with ARM, AGC, and other FAA elements.

Flight Technologies and Procedures Division, AFS-400. › e. Provides technical advice and guidance on emerging cockpit CNS…

Chapter 9. Flight Technologies and Procedures Division, AFS-400

1. Flight Technologies and Procedures Division, AFS-400. The Flight Technologies and Procedures Division is responsible for regulations and policy development governing Instrument Flight Procedures (IFPs), and safety, capacity, and efficiency improvements based on advanced technology and innovative operational concepts. The division is also responsible for developing concepts, programs, policies, and system requirements necessary to implement Next Generation (NextGen) technologies, including satellite-based instrument flight rules (IFR), navigation, and procedures necessary to implement futuristic communications and surveillance capabilities for oceanic, remote area, domestic en route and terminal area operations, and for nonprecision and precision instrument approaches. AFS-400 develops standards and criteria for Communication, Navigation, and Surveillance (CNS) flight systems and new technology operations and training requirements in collaboration with other AFS Divisions, as appropriate.

Continue reading ↓ 120 of 244 passages shown