Radar Vectors
FAA Order Cancelled Issued Sep 19, 2008 AFS-140 77 pages Copy saved Nov 18, 2026

Order FS 1100.1A Flight Standards Service Organizational Handbook

This document is no longer current. Cancelled by FS 1100.1B. Check the official source before relying on it.

Official source ↗ Open PDF

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Flight Standards Policy

ORDER FS1100.1A

Effective Date:

9/19/08

SUBJ: Flight Standards Service Organizational Handbook

FOREWORD

1. This order describes Flight Standards Service's (AFS) mission, functions, and organizational structure to the lowest level. The organizational structure and functions at the director level is documented in Federal Aviation Administration (FAA) Order 1100.2, Organization - FAA Headquarters.

ORDER FS1100.1A

2. Revisions to this order should be made based on organizational needs, and management considerations and approval. The Organizational Resources and Program Management Division, AFS-100, and the Technical Information and Communications Programs Branch, AFS-140, are responsible for the maintenance of this order.

J^mesJ. Ba^6ugh 0 Director, Flight Standards Service

Distribution: A-WX(FS)-3; A-FFS-0 (SUPV) Initiated By: AFS-140

Table of Contents

Paragraph Page Chapter 1. General Information

Section 1. Introduction

Section 1. Introduction

1. Purpose of This Order 1- 2. Audience 1- 3. Where You Can Find This Order 1- 4. What This Order Cancels 1- 5. Explanation of Changes 1- Section 2. Requesting Organizational Change

6. Discussion 1-1 7. Director's Management Team 1-2 8. Initiating an Organizational Change 1-2 Section 3. Flight Standards Service, AFS-1

9. Mission 1-3 10. Functional Organization 1-4 11. Functions 1-4 12. Special Delegations 1-5 13. Special Relations 1-6 14. Office of the Director 1-7 15. FAA Safety Team (FAASTeam) 1-7 16. Executive Officer 1-8 17. System Approach for Safety Oversight (SASO) Program Office 1-8 18. Flight Standards Quality Assurance Staff. 1-9 19. National Flight Program Oversight Office 1-12 20. thru 30. Reserved 1-12 Figure 1-1. Flight Standards Service Functional Organization Chart 1-13

Figure 1-1: picture of page 2Figure 1-1 · page 2
Picture of the page from the copy saved here

Chapter 2. International Programs and Policy Division, AFS-50

Chapter 2. International Programs and Policy Division, AFS-50

1. International Programs and Policy Division 2-1 2. International Affairs Branch 2-1 3. International Operations Branch 2-2 4. International Technical Support Branch 2-2 5. thru 15. Reserved 2-3

Chapter 3. Organizational Resource and Program Management Division, AFS-100

Chapter 3. Organizational Resource and Program Management Division, AFS-100

1. Organizational Resource and Program Management Division 3-1 2. Administrative Resources Branch 3-1 3. Financial Resources Management Branch 3-1 4. Human Capital Resource Management Branch 3-2 5. Technical Information and Communications Programs Branch 3-2 6. New Technology Development Branch 3-3 7. Planning and Performance Management Branch 3-4 8. thru 18. Reserved 3-4

Table of Contents (Continued)

Paragraph Page Chapter 4. Air Transportation Division, AFS-200

1. Air Transportation Division 4-1 2. National Simulator Program 4-1 3. Air Carrier Training and 142 Training Center Branch 4-2 4. Air Carrier Operations Branch 4-4 5. Voluntary Safety Programs Branch 4-6 6. 135 Air Carrier Operations Branch 4-8 7. Technical Programs Branch 4-9 8. Program Management Support Branch 4-10 9. thru 19. Reserved 4-11

Chapter 5. Aircraft Maintenance Division, AFS-300

Chapter 5. Aircraft Maintenance Division, AFS-300

1. Aircraft Maintenance Division 5-1 2. Program Management and Information Branch 5-2 3. Special Programs Branch 5-3 4. Air Carrier Maintenance Branch 5-3 5. Repair Station Branch 5-4 6. General Aviation and Avionics Branch 5-5 7. thru 17. Reserved 5-7

Chapter 6. Flight Technologies and Procedures Division, AFS-400

Chapter 6. Flight Technologies and Procedures Division, AFS-400

1. Flight Technologies and Procedures Division 6-1 2. Management Operations Branch 6-2 3. Flight Operations Branch 6-3 4. Flight Procedure Standards Branch 6-5 5. Future Flight Technology Branch 6-7 6. Flight Operations Simulation Branch 6-9 7. Flight Systems Laboratory 6-11 8. Flight Procedure Implementation and Oversight Branch 6-13 9. Performance Based Flight Systems Branch 6-14 10. thru 19. Reserved '. 6-15

Chapter 7. Flight Standards Training Division, AFS-500

Chapter 7. Flight Standards Training Division, AFS-500

1. Flight Standards Training Division 7-1 2. Plans and Programs Branch 7-2 3. Quality Assurance Branch 7-2 4. Curriculum Development Branch 7-3 5. thru 15. Reserved 7-4

Chapter 8. Regulatory Support Division, AFS-600

1. Regulatory Support Division 8-1 2. Light Sport Aviation Branch 8-1 3. Aviation Data Systems Branch 8-2

Chapter 8. Regulatory Support Division, AFS-600

9/19/08 FS1100.1A

Table of Contents (Continued)

Paragraph Page 4. Airman Testing Standards Branch 8-2 5. Designee Standardization Branch 8-3 6. Designee Quality Assurance Branch 8-4 7. thru 17. Reserved 8-5

Chapter 9. Civil Aviation Registry, AFS-700

1. Civil Aviation Registry 9-1 2. Aircraft Registration Branch 9-1 3. Airmen Certification Branch 9-2 4. thru 14. Reserved 9-3

Chapter 10. General Aviation and Commercial Division, AFS-800

Chapter 10. General Aviation and Commercial Division, AFS-800

1. General Aviation and Commercial Division 10-1 2. Plans and Programs Branch 10-2 3. Certification and General Aviation Operations Branch 10-2 4. Commercial Operations Branch 10-4 5. thru 15. Reserved 10-4

Chapter 11. Flight Standards Certification and Surveillance Division, AFS-900

Chapter 11. Flight Standards Certification and Surveillance Division, AFS-900

1. Flight Standards Certification and Surveillance Division 11-1 2. Program Management Branch 11-2 3. Flight Standards Safety Analysis Information Center (FSAIC) 11-2 4. ATOSCMO 11-3 5. Flight Standards SMS Program Office 11-3 6. thru 16. Reserved 11-4

IV

Chapter 1. General Information

Section 1. Introduction

Section 1. Introduction

1. Purpose of This Order. This order defines the organization and functions of the Flight Standards Service (AFS) headquarters elements to the lowest level, and updates the organizational structure and programs within the Service.

2. Audience. The audience for this order includes employees from the following services within the office of the Associate Administrator for Aviation Safety (AVS). The branch level in Washington headquarters AFS, all regional Flight Standards divisions, and all supervisors in the Flight Standards field offices.

3. Where You Can Find This Order. You can access this order through the Flight Standards Information Management System (FSIMS) at http://fsims.avs.faa.gov.

4. What This Order Cancels. Order FS 1100.1, Flight Standards Service Organizational Handbook, dated July 16,1998, is canceled.

5. Explanation of Changes. This revision incorporates updated information on the roles and responsibilities within the Flight Standards Service organization.

Section 2. Requesting Organizational Change

Section 2. Requesting Organizational Change

6. Discussion. Flight Standards makes changes to this order through the agency directives management system. This process assures that organizations directly affected by a change to the order coordinate on those draft changes. However, organizational changes within Flight Standards could affect divisions with which coordination is not required according to the agency directives system. For example, a reorganization/realignment of a division within Flight Standards could require a change in staffing standards. Though this would not directly affect the Human Capital Resource Management Branch, AFS-130, that branch would need to adjust numbers and allocation of staff, the Financial Resources Management Branch, AFS-120, would have to adjust facilities and equipment execution, and so forth. As a result, Flight Standards has established a process to evaluate proposed organizational changes that require a change to Order FS 1100.1, Flight Standards Service Organizational Handbook.

a. Examples of Organizational Realignments. A number of situations necessitate a realignment within Flight Standards. A division manager may determine the need for a change to a branch within the division or to create or eliminate a branch. A staff manager may seek to expand his or her staff to a division or to transfer staff functions to a division for better grouping of functions and expertise.

b. Peer Review. For the purpose of this order, any changes made to an existing division, branch, or staff among Flight Standards' headquarters offices must be accomplished using a peer review process to evaluate proposed organizational changes and to make recommendations on such proposals to AFS-1. The result of the peer review will either be a revision of the proposal to reflect changes suggested by the peer review, or a recommendation that the Service Director either approve or disapprove the proposed change, with or without modification.

c. Publication. After approval by the Service Director, the publication of a change to Order FS 1100.1 implements the Director's decision. (See paragraph 6b for a description of the peer review and approval process.)

7. Director's Management Team. The Director's Management Team (DMT) consists of the managers of the headquarters Flight Standards divisions/staffs or their designated deputies. The chair of the DMT is the Deputy Director, AFS-2. The DMT conducts the peer review process for organizational changes to Flight Standards headquarters divisions/staffs.

8. Initiating an Organizational Change.

a. Determine the Need for a Change in the Organizational Structure. After the staff or division manager has determined the need for a reorganization or realignment, the manager prepares a request in a decision memorandum format. The memorandum shall be addressed to the Director, Flight Standards Service (AFS-1). The memorandum should contain background or supporting information and address, at a minimum, the following areas:

(1) The general purpose of the reorganization;

(2) An explanation of how the reorganization will apply resources to Flight Standards' priorities;

(3) An explanation of how the reorganization relates to the AFS, AVS, and agency strategic plans;

(4) A description of the staffing implications, i.e., increases, decreases, supervisory ratios, etc;

(5) An explanation of how the reorganization would improve the efficiency and effectiveness of Flight Standards, i.e., it would improve customer service, enhance aviation safety, or be a more effective grouping of functions and duties, etc;

(6) Any issues or situations on which the reorganization could have an adverse impact. The memorandum should address the pros and cons of each issue;

(7) Any other issues surrounding the proposed reorganization/realignment, and a discussion of the issues; and

(8) Divisions/staffs making organizational changes should consult with the appropriate bargaining unit representatives when drafting the proposed reorganization request to assure that union concerns are addressed.

b. Review by the DMT.

(1) Upon receipt of the memorandum requesting an organizational change, AFS-2 will call a meeting of the DMT. The manager requesting the change remains part of the DMT but will only answer questions about the proposed change for his or her peers. The manager will not participate in the determination of the recommendations.

(2) The DMT will review the proposed change based on the criteria in paragraph 8a, using the requested memorandum, any other supplemental information from the manager, and any verbal answers supplied by the division/staff manager requesting the change.

(3) AFS-2 will prepare a recommendation (in memorandum format with "Approved" and "Disapproved" signature blocks for the Director's signature) based on the DMT's decision for the Service Director to either approve or disapprove the request for an organizational change. All supporting material, e.g., the original decision memorandum, any background, supporting information, or issue papers, etc., must be included with the recommendation for the Service Director's reference.

c. Approval by the Service Director.

(1) If the Service Director approves the request for an organizational change, he or she signs the recommendation memorandum on the "Approved" signature block and returns the package to the manager requesting the organizational change.

(2) The manager then forwards the approved package (original requesting memorandum and background or supporting material) to AFS-140 through AFS-100 for processing under the agency's directives management system.

(3) An AFS-140 staff specialist will prepare and coordinate the changes to Order FS 1100.1 in accordance with agency guidelines.

d. Disapproval by the Service Director. If the Service Director disapproves the proposed organizational change, the DMT returns the package to the division/staff manager requesting the organizational change and provides an explanation of the Director's action,

(1) The DMT may identify areas that the requesting manager may wish to address before resubmitting the proposed change.

(2) The manager resubmits the proposal in the same manner as before.

Section 3. Flight Standards Service, AFS-1

Section 3. Flight Standards Service, AFS-1

9. Mission. The AFS promotes safety of flight of civil aircraft in air commerce by:

a. Setting certification standards for air carriers, commercial operators, air agencies, and airmen (except air traffic control (ATC) tower operators).

b. Directing, managing, and executing certification, inspection, and surveillance activities to ensure adequacy of flight procedures, operating methods, airmen qualification and proficiency, aircraft maintenance, and the maintenance aspects of continued airworthiness programs.

c. Managing the systems for registry of civil aircraft and all official airmen records, and supporting law enforcement agencies responsible for drug interdiction.

10. Functional Organization. The functional organization structure of AFS is shown in Figure 1-1.

11. Functions.

a. Flight Standards is responsible for:

(1) Certification, operating methods, flight operations, and maintenance activities of United States (U.S.) air carriers and foreign air carriers operating in and over the U.S.

(2) Maintenance standards for U.S.-registered aircraft, including continued airworthiness.

(3) Certification and conduct of commercial, industrial, private, and general aviation operations including rotorcraft.

(4) Examination and certification (except medical) of airmen (except ATC tower operators) and air agencies.

(5) Examination and appointment of persons designated and authorized to act as representatives of the Administrator pursuant to Title 49 of the United States Code (49 U.S.C.) with respect to certification of flight airmen and the maintenance of civil aircraft and products.

(6) Use of air navigation facilities, appliances, and systems by civil aircraft; the minimum equipment capability of civil aircraft for operating in an established environment; and the operational aspects of flight procedures including en route and instrument approach procedures (except ATC procedures).

(7) Approval of and surveillance over the aircraft maintenance programs of operators and pilot schools.

(8) Assurance that appropriate operational considerations are accommodated with regard to aircraft maintenance policies, procedures, and practices.

(9) Operating requirements and criteria for use of aircraft systems; e.g., determining whether a navigation device can be used as a sole source of navigation or how many are required; determining the type of airborne equipment required for low visibility approaches and landings.

(10) Ensuring that operational considerations are accounted for in the "Operating Limitations and Information" (including operational requirements and pilot procedures) requirements, policies, and practices for the development of airplane and rotorcraft flight manuals.

(11) Flight inspection policy.

(12) Promoting safety through monitoring compliance with the Federal Aviation Regulations, including the gathering of evidence and the preparation of Enforcement Investigative Reports (EIR) to support the initiation of administrative and legal enforcement action, when appropriate.

b. With respect to the foregoing:

(1) Develops and recommends, or issues within the delegated authority of the Director, regulations and minimum standards.

(2) Develops and recommends national policies for issuance by the Administrator.

(3) Develops and issues guidance, procedures, practices, and program plans consistent with national policies.

(4) Develops and recommends specific program goals and areas of emphasis to guide field program planning and performance.

(5) Evaluates the adequacy of existing regulations, policies, procedures, practices, and program performance in meeting broad Federal Aviation Administration (FAA) goals, as well as specific program goals.

(6) Develops plans and technical guidance for the protection and use of civil aviation resources, except airports, in time of national emergency.

(7) Recommends budget levels for formulation of decision packages on national programs, and recommends allocations of appropriated resources based on review of headquarters and regional requirements and quarterly review information.

(8) Develops and recommends programs and practices to ensure the professional competency and development of employees.

(9) Determines the need for and recommends research and development projects establishing the relative priority of those projects recommended.

(10) Exercises line authority over regional Flight Standards divisions.

12. Special Delegations.

a. Final authority is delegated to the Director of AFS, to make, issue, amend, and terminate rules and regulations promulgated under Titles III and VI of 49 U.S.C. relating to the following subject matters.

(1) Appendices to Title 14 of the Code of Federal Regulations (14 CFR) within the purview of the Director of AFS.

(2) Standard Instrument Approach Procedures (SIAP).

(3) Minimum en route altitudes.

(4) Flight procedures policy, operational weather minimums, and minimum equipment requirements.

b. With respect to the functions of paragraph 1 la, final authority is delegated to the Director of AFS:

(1) To grant or deny exemptions from rules and regulations.

(2) To issue, amend, withdraw, or extend notices of proposed rulemaking.

(3) To take final action on any petition for reconsideration of an amendment, or a refusal to amend operations specifications (OpSpecs), and to take final action on any request for reconsideration of original issuance, amendment, or refusal to issue or amend an airman certificate, air carrier certificate, or an air agency certificate.

(4) To grant or deny exemptions under 49 U.S.C. to foreign airmen who are directly in charge of inspection, maintenance, overhaul or repair of aircraft, aircraft engines, propellers, appliances, or components.

c. The authority of paragraphs 1 la and 1 lb may not be redelegated.

13. Special Relations.

a. Regulations. Flight Standards is responsible for the substantive content of rules within its purview, as distinguished from the responsibility of the Office of the Chief Counsel (AGC) for the legal adequacy of the rules.

b. Aircraft Noise Abatement. Flight Standards is responsible for developing, evaluating and approving or disapproving concepts, standards, equipment, and flight procedures related to aircraft noise abatement, as distinguished from the Office of Environment and Energy (AEE) which is responsible for the substantive content of rules within its purview.

c. Continued Airworthiness. Flight Standards is responsible for maintenance standards for U.S.-registered aircraft as distinguished from the Aircraft Certification Service's (AIR) responsibility for the engineering standards and practices, and the manufacturing aspects that are applied to ensure the continued airworthiness of aircraft and aeronautical products.

d. Rotorcraft. The Rotorcraft Task Force responsibility resides in AFS (Air Transportation Division, AFS-200 and General Aviation and Commercial Division, AFS-800). The service is responsible for rotorcraft operations and maintenance matters. The service will coordinate with the Air Traffic Organization (ATO) on rotorcraft operational matters and with the Associate Administrator for Airports on matters relating to heliport programs. The Associate Administrator for Airports and the ATO, respectively, are responsible for helicopter planning and development, and for integration of rotorcraft into the National Airspace System to fully utilize their unique capabilities. The Office of Aviation Policy, Planning, and Environment (AEP) develops the Rotorcraft Master Plan.

e. Airshow and Sport Aviation Activities. Flight Standards will work closely with ATO regarding airshow and other sport aviation matters and will facilitate the consideration of the concerns of the general aviation community in air traffic rules and aviation safety regulatory actions.

9/19/08 • FS 1100.1 A

f. Flight Procedures and All Weather Operations. Flight Standards is responsible for developing national concepts, policies, standards, systems, procedures, and programs with respect to the operational and flight technical aspects of all weather operations, including instrument approach procedures (IAP), minimum en route altitudes, flight procedures, operational weather minimums, and minimum equipment requirements. Also, AFS is responsible for developing concepts, rules, standards, and criteria governing operational and technical aspects of flight procedures (except ATC procedures). These functions are distinguished from the responsibilities of the Airway Facilities Service to implement agency policy, standards, and criteria in the development and standardization of flight procedures and the flight inspection of air navigation facilities.

g. New and Modified Aircraft Flight Standards and AIR through the Aircraft Evaluation Groups (AEG), and the Aircraft Certification Offices (ACO) share responsibility for developing policy, procedures, practices, and standardization related to operational and maintenance acceptability of new and modified aircraft. This responsibility must be clearly represented by the AEG at the initiation of the aircraft certification process which is the responsibility of the AIR. Flight Standards accomplishes this responsibility through Flight Operations Evaluation Boards (FOEB), Flight Standardization Boards (FSB), and Maintenance Review Boards (MRB).

14. Office of the Director. The Office of the Director:

a. Advises and assists the Associate Administrator for AVS in providing support in the justification of budget estimates, in the administration of executive decisions, and in the

development and maintenance of productive relationships with the public, the aviation community, and other government agencies.

b. Provides for the development, coordination, and execution of, and is accountable to the associate administrator for the adequacy of FAA:

(1) Policies, standards, systems, and procedures.

(2) Public rules, regulations, and standards.

(3) Program plans issued by or on behalf of the Administrator.

c. Provides the effective evaluation of program performance, and ensures the adequacy of follow-up to secure correction of deficiencies.

d. Ensures that all elements of AFS participate constructively in the FAA Equal Employment Opportunity (EEO) Action Plan and in equal employment opportunity planning for the future.

e. Provides leadership and direction in the planning, management, and control of office activities.

15. FAA Safety Team (FAASTeam). The FAA National FAASTeam manager, AFS-8, and staff, are responsible for developing national policies, standards, and procedures to guide the agency in overseeing the conduct of the FAASTeam. The FAASTeam manager:

a. Serves as the Flight Standards focal point for all FAASTeam programs and initiatives.

b. Develops and recommends national policies, standards, systems, procedures, and program plans involving the safety program.

c. Participates in the analysis and evaluation of field execution of safety programs.

d. Provides organizational guidance and policy to the division managers and regional FAASTeam managers.

e. Serves as liaison to aviation industry on aviation safety programs and initiatives related to risk management, system safety, and new technology concepts.

f. Oversees the concept and development of new aviation safety products.

16. Executive Officer. The Executive Officer, AFS-10, and staff prepare special projects for the Director. The executive officer:

a. Coordinates, facilitates, and writes high level briefings and issue papers on complex, technical programs and initiatives for a variety of audiences, including the Administrator,

Congress, high level government officials, and industry.

b. Oversees all confidential matters concerning investigations involving the service including but not limited to the Administrator Hotline, Office of Inspector General, FAA Whistleblower Protection Program, and the AFS Internal Assistance Capability.

• c. Provides organizational guidance and direction to executive managers representing policy and philosophy of the Director.

d. Serves as liaison for Congressional hearings and preparation for such hearings.

e. Serves as the AFS point of contact on the Safety Issues Reporting System (SIRS).

17. System Approach for Safety Oversight (SASO) Program Office. The SASO Program Office, AFS-30, is responsible for bringing the Flight Standards programs with elements related to certification, surveillance, investigation, and enforcement into alignment. The SASO program will encompass all of the systems and process development activities necessary to migrate from the current approach to a proactive system safety approach to oversight. The SASO Program Office is the focal point for all business process engineering efforts in Flight Standards, requiring dynamic interaction between AFS-30 and all AFS Headquarters divisions. This will allow the SASO Program Office to maintain standardization of processes across the organization. The SASO Program Office:

a. Provides the Office of Aviation Safety Information Technology Division with information technology (IT) system engineering technical expertise related to the AFS system safety business process.

b. Manages life-cycle/program of the SASO program under the Acquisition Management System.

c. Integrates all safety-related activities of Flight Standards, including, but not limited to, current major programs and initiatives such as the Air Transportation Oversight System (ATOS); System Safety Analysis for General Aviation (SAGA); Safety Performance Analysis System (SPAS); Operations Specifications Subsystem (OPSS); and the Flight Standards Automation System (FSAS) efforts, and to ensure integration of data repositories with comparable data records and formats.

d. Integrates human factor considerations, promotes information sharing with the aviation community, and allows for continual improvement that keeps pace with and uses advances in technology and the changing aviation environment.

e. Develops and administers the SASO requirements management process across AFS lines of business.

f. Continuously improves safety-related business process interfaces across AFS divisions, in keeping with the AFS Quality Management System (QMS) and International Organization for Standardization (ISO) 9001 quality system standards.

g. Provides the chair for AFS configuration management for the SASO program.

h. Provides participants in the AVS Configuration Control Board in order to maintain consistency with technical direction across the products and associated projects; and to provide an interface with other AVS Configuration Control Boards.

i. Develops the AFS strategic direction for the development of safety-related business processes and information technology systems.

j . Sponsors the "Risk Management/Decision Support" Research Project Description to align research and development in this field with the SASO program.

k. Manages the SASO budget for program/initiative support to centralize AFS funding for requirements development of business process engineering and the corresponding information systems and analysis and decision support tools.

1. Represents AFS in cross-organizational initiatives that have an interface with the AFS safety-related business process.

18. Flight Standards Quality Assurance Staff.

a. The Flight Standards Quality Assurance Staff, AFS-40, is a data driven independent AFS organization established to ensure the consistency and to validate the effectiveness of core systems and processes within AFS. This is achieved through audits, special studies and consulting services.

b. AFS-40 is a registered ISO 9000 and AS9100 organization and adheres to the policies and practices described in the ISO 9001:2000 standard. The staff has the responsibility of the growth and maintenance of the AFS QMS to foster continuous improvement in AFS systems and processes to support aviation safety.

9/19/08 FS1100.1A

c. AFS-40 is responsible for auditing the assigned programs and processes for the purpose of identifying system deficiencies, ensuring standardization and reporting directly to AFS-1 regarding the affect of those deficiencies so that improvements can be made.

d. The main office, the manager, and several staff members are located in Glen Burnie, Maryland. A few employees assigned to this staff will remain in their current geographic locations and will operate virtually from their current FAA offices, unless other arrangements are made. Each staff member is assigned to one primary program but may be used in other programs if the need arises. Additionally, other AFS employees serve collaterally as auditors under the supervision of the staff, especially in the Flight Standards Evaluation Program (FSEP).

e. The functions of AFS-40 are as follows:

(1) Establishes an annual business plan with identified targeted areas, activities, and milestones to guide the staff in its Business Performance Plan.

(2) Conducts system-based audits that make full use of system-based checklists, automated tools, statistical sampling, risk and trend analysis, and best practices.

(3) Validates the various AFS model establishment, design, implementation, and application in the context of the air transportation system environment to determine if processes remain relevant, current, functional, and effective.

(4) Through the FSEP and the AFS Internal Assessment Program, audits all process modules for the purpose of identifying process deficiencies.

(5) Manages the FSEP, which conducts independent reviews of Flight Standards' programs to identify and correct systemic weaknesses and to evaluate the adequacy of and adherence to national policy and guidance.

(6) Reviews all AFS's headquarters organizations, regional divisions, and supporting field office processes on a 3-year rotational cycle.

(7) Measures and reports on the progress of programs, using defined standards and audit criteria to determine effectiveness in achieving desired results.

(8) Analyzes audit findings and deficiencies to determine root causes and assess their effects.

(9) Provides suggestions for revising programs in response to audit findings.

(10) Interfaces with other AFS offices to identify and document factors in their audit findings and to provide critical information needed for process improvement.

(11) Responsible for the Flight Standards Document Control Process ensuring that QMS documents are properly approved and updated and that the correct revisions of documents are available to the personnel who need them.

(12) Plans, implements, and records audit procedures, audit findings, and plan accomplishments.

(13) Communicates audit findings directly to AFS-1 and to the program, regional, or field office managers, as appropriate.

(14) Is the focal point for the implementation and maintenance of quality management systems within AFS.

(15) Satisfies International Civil Aviation Organization (ICAO) requirements for quality assurance functions within AFS.

(16) Responsible for maintenance and review of all AFS Corrective Action Requests to report the effectiveness of the process at AFS/AVS management review meetings.

(17) Responsible for maintenance review of all AFS Preventive Action Requests to report the effectiveness of the process at AFS/AVS management review meetings.

(18) Responsible for the development, maintenance, and updates of the AFS Data Express Automated Analysis of Data Tool for region and field offices.

(19) Responsible for AFS Management Review Process to determine the overall suitability, adequacy and effectiveness of the AFS QMS.

(20) Compiles quarterly AFS division and field analysis of data to demonstrate the suitability, adequacy and effectiveness of the QMS and to evaluate where continual improvement of the QMS can be made.

(21) Supports the AVS Analysis of Data process by providing additional details on how the suitability, adequacy and effectiveness requirements are met within AFS.

(22) Compiles quarterly AFS division and field analysis on the Stakeholder/Customer Feedback Process in support of the AVS Stakeholder/Customer Feedback Process.

(23) Responsible for the AFS Quality Planning Process that affects changes/ revisions to the AFS Business Plan or significant changes to the types of products or services AFS provides.

(24) Responsible for the proper description of the design and development control process when organizations with AFS engage in design and development activities.

(25) Responsible for the evaluation of the Nonconforming Product and Services Process and for ensuring its effectiveness within AFS.

(26) Responsible for the control of records process within AFS ensuring that records remain legible, readily identifiable and retrievable. Also ensures that records are stored properly, protected, retained for an appropriate period and properly disposed.

19. National Flight Program Oversight Office.

a. The National Flight Program Oversight Office, ASW-280, serves as the FAA centralized policy-setting and oversight organization for ensuring the safe, effective, and efficient use of FAA flight program resources. The office advises the Administrator, Associate Administrator for AVS, and other principal officials on flight program matters and develops the policy and management directives for the operation of FAA aircraft. This office is located in Oklahoma City, Oklahoma, and reports directly to the Manager, Flight Standards Division, ASW-200.

b. The Flight Program Policy Committee will be chaired by AFS-1.

RESERVED. Paragraphs 20 thru 30.

FIGURE 1-1. FLIGHT STANDARDS SERVICE FUNCTIONAL ORGANIZATION CHART

FIGURE 1-1. FLIGHT STANDARDS SERVICE FUNCTIONAL ORGANIZATION CHART

SYSTEM APPROACH FOR SAFETY

OVERSIGHT PROGRAM OFFICE,

AFS-30 • Focal point for all safety-related business process engineering • Provides life-cycle/program management of the SASO program • Integrates all AFS system safetyrelated activities • Administers the SASO requirements management process • Provides AVS with IT system engineering technical assistance

AIR TRANSPORTATION

AIR TRANSPORTATION

DIVISION, AFS-200 Operations regulations, policy, and guidance for certification, inspection, and surveillance of air carrier, commuter, and on demand operations, and training centers Airline transportation pilot certification Flight crewmember qualification and proficiency National Simulator Program Air carrier operator insurance certification

REGULATORY SUPPORT

REGULATORY SUPPORT

DIVISION, AFS-600 Regulatory and standards development Operation and management of the national aviation safety data systems Development of airman exams and examining standards Development of airworthiness standards and advisory material Development and oversight of AFS designees

OFFICE OF THE DIRECTOR, AFS-1 Accountability for Flight Standards programs National program development, coordination, and execution Directs the service

INTERNATIONAL PROGRAMS AND POLICY DIVISION, AFS-50 • Manages AFS international activities • Coordinates development of international policies, standards, regulations, and positions • Serves as the AFS clearance center for Interagency Group on International Aviation

AIRCRAFT MAINTENANCE

AIRCRAFT MAINTENANCE

DIVISION, AFS-300 Maintenance regulations, policy, and guidance for training, certification, inspection, and surveillance governing air carrier, air taxi, commuter airline, and commercial operator maintenance and continued airworthiness programs Mechanic, repairmen, and parachute ngger certification Policy for repair station and aviation maintenance technician school certification and surveillance Resource, project, and administrative management planning and support

CO

ORGANIZATIONAL RESOURCE AND PROGRAM MANAGEMENT

ORGANIZATIONAL RESOURCE AND PROGRAM MANAGEMENT

DIVISION, AFS-100 • Administrative management > Fiscal resource management • Human capital management > Technical information management • New technology development • Planning and performance management

FLIGHT TECHNOLOGIES AND PROCEDURES DIVISION, AFS-400 • Flight procedures and new technology regulations, policy, and training requirements, CNS standards • Focal point for NAS capacity, aviation weather, human factors, and R&D • ICAO standards, recommended practices, harmonization of flight technologies and procedures • Airspace and flight procedures safety analysis • Chief scientists for simulator engineering, wake turbulence flight systems laboratory

CIVIL AVIATION REGISTRY,

AFS-700 Determines the need for regulations, policy, and guidance for aircraft registration and recording of aircraft titles and security documents Provides system for aircraft registration, recordation, and maintenance of records Provides system for issuance of airman certificates, ratings, and maintenance of records

GENERAL AVIATION AND COMMERCIAL DIVISION, AFS-800 • Regulations, policy, and guidance for certification, inspection, and surveillance of agricultural operators, rotorcraft external load operators, flight schools, and part 125 operators • Pilot and flight instructor certification • Executive level liaison with the general aviation community • Publication of FAA Aviation News • Fractional ownership and public use operations

FLIGHT STANDARDS QUALITY ASSURANCE STAFF,

AFS-40 • Establish and maintain the capability to independently assess AFS programs and procedures, including the Air Transportation Oversight System (ATOS) and the Certification, Standardization, and Evaluation Team (CSET) • Manages the Flight Standards Evaluation Program (FSEP) • Conducts audits and tracks findings

FLIGHT STANDARDS TRAINING

FLIGHT STANDARDS TRAINING

DIVISION, AFS-500 i Liaison between AFS and FAA

Academy ' Inspector resource management • Development of national FS training • Analysis of inspection program using the policy, course development, quota management i Evaluation of training programs and

administration of Operational Training Needs Assessment process ' Development and maintenance of Job

Task Analyses

FLIGHT STANDARDS CERTIFICATION AND SURVEILLANCE DIVISION,

AFS-900 National Flight Standards Work Program Guidelines Safety Performance Analysis System Flight Standards Safety Analysis Information Center Air Transportation Oversight System Certificate Management Office (ATOS CMO) Flight Standards Safety Management Svstem (SMS) Program Office

Chapter 2. International Programs and Policy Division, AFS-50

Chapter 2. International Programs and Policy Division, AFS-50

1. International Programs and Policy Division. The International Programs and Policy Division, AFS-50, is responsible for the management of international activities of the service.

2. International Affairs Branch. The International Affairs Branch, AFS-51, is responsible for the following functions:

a. Serves as the primary contact and develops policy for AFS international regulatory affairs and technical agreements.

b. Serves as a point of contact for the European Aviation Safety Agency, Transport Canada, ICAO, regional initiatives, North American Free Trade Agreement (NAFTA), Asia-Pacific Economic Co-operation, and other foreign aviation authorities.

c. Develops, approves, and manages the ICAO Endorsed Government Safety Inspector (GSI) training to reflect ICAO program for training of other foreign civil aviation authorities.

d. Develops and manages the ICAO model aviation regulatory documents consisting of a civil aviation law, regulations, and implementing standards for personnel licensing, flight operations and continuing airworthiness of aircraft and related technical guidance material.

e. Serves as the AFS primary point of contact for ICAO's Universal Aviation Safety Oversight Audit Program (USOAP).

f. Initiates notification of U.S. differences to ICAO (obligation in Article 38 of the Chicago Convention) for ICAO Standards and Recommended Practices which relates to AFS responsibilities when identified by other appropriate AFS divisions with associated rulemaking responsibilities.

g. Aids in the development, presentation, and execution of technical assistance programs for foreign civil aviation authorities who have demonstrated deficiencies and have requested such assistance.

h. Coordinates with the Office of the Assistant Administrator for International Aviation on reimbursable technical assistance, and policy and operational issues affecting international aviation operations. Also coordinates with regional international liaison officers and FAA international representatives.

i. Responsible for the AFS/AVS development and oversight of other government-togovernment agreements.

j . Develops, coordinates, and monitors AFS policy regarding other international civil aviation organizations, such as the European Aviation Safety Agency (EASA).

k. Develops legislative proposals and rulemaking and provides policy on 14 CFR part 187 issues. Prepares Federal Register and advisory circular (AC) publications for annual adjustments in fees.

1. Responsible for the development and oversight of AFS-related Bilateral Aviation Safety Agreements and associated implementation procedures.

m. Serves as the clearance point for the Inter-Agency Group on International Aviation (IGIA) for purposes of coordinating U.S. positions and strategies, normally for ICAO proposals and events.

n. Maintains records documenting AFS technical assistance and training activities.

o. Prepares reports documenting AFS technical assistance and training activities.

p. Supports AFS-52 and AFS-53 in review and preparation of reports documenting AFS technical assistance and training activities and other support as needed.

3. International Operations Branch. This branch, AFS-52, is responsible for the following functions:

a. Responsible for regulations and policy recommendations governing certification and operations aspects of part 129 foreign air operators, including OpSpecs, rulemaking amendments, identification of resulting U.S. differences with ICAO Standards and Recommended Practices, exemption requests, development of guidance materials, and coordination of these activities with other FAA offices. Responsible for coordinating any National Transportation Safety Board (NTSB) Recommendations and Runway Incursion Program initiatives with part 129 foreign air carriers.

b. Develops and implements agency policy on the International Code-share Safety Audit program for U.S. air carriers and part 129 foreign air carriers. Responds to requests from foreign air carriers for part 129 authorization and/or economic authority under part 375. Coordinates with Office of the Secretary of Transportation regarding part 129 and other foreign air carrier operations.

c. Recommends changes to existing information systems such as National Program Guidelines, Vital Information Subsystem, Program Tracking and Reporting Subsystem, Airman Certification Rating Application, Operations Specifications Subsystem, etc.

d. Sets guidelines for monitoring foreign air carrier operations and practices, including airport use, establishment or use of dispatch and meteorological facilities, maintenance programs, and minimum equipment lists.

e. Evaluates results of FAA foreign operator ramp inspections and interfaces with other civil aviation authorities on safety inspection matters under the International Aviation Safety Data Exchange (IASDEX) system. Includes coordinating results of ramp inspections conducted by foreign civil aviation authorities on U.S. carriers outside of the United States with other FAA offices.

4. International Technical Support Branch. This branch, AFS-53, is responsible for the following functions:

a. Develops and maintains a pool of skilled AFS technical experts as primary resources for conducting assessments under the IASA program, technical review, Action Plan development,

supplement technical assistance activities, international training courses, and any other international functions requiring aviation safety technical expertise.

b. Monitors foreign air carrier operations and practices, including airport use, establishment or use of dispatch and meteorological facilities, maintenance programs, and minimum equipment lists.

c. Performs supplemental inspections of foreign air carriers at airports nationwide with charter and/or scheduled service as an additional support of field office's surveillance efforts.

d. Acts as coordinator for requests for aviation safety inspector (ASI) resources from Washington headquarters, regional and field offices to support: technical assistance activities, international training, technical reviews, IASA and consultations.

e. Supports AFS-51 and AFS-53 in review and preparation of reports documenting AFS technical assistance and training activities and other technical support as needed.

f. Serves as primary contact and develops policy for the IASA program.

g. Supports AFS-51 and AFS-52 in respective branch's activities and other technical support as needed.

RESERVED. Paragraphs 5 thru 15.

9/19/08 FS1100.1A

Chapter 3. Organizational Resource and Program Management Division, AFS-100

Chapter 3. Organizational Resource and Program Management Division, AFS-100

1. Organizational Resource and Program Management Division. The Organizational Resource and Program Management Division, AFS-100, is responsible for the formation and execution of the Flight Standards operational budget and staffing allocations; provides national policy and guidance for the Flight Standards operations budget program; and is responsible for strategic and tactical planning, fiscal and human resource management, management analysis, organizational design and standardization, information management, administrative management, emergency readiness and operations, and health and safety programs. The division also is responsible for AVS's facilities and equipment (F&E) program and provides national policy and guidance on life cycle management on AVS's F&E investments. The division is subdivided into six branches, which are described below.

2. Administrative Resources Branch. This branch, AFS-110, administers functions to AFS at both the headquarters and regional levels. In this regard, the branch:

a. Develops and enforces policies with regard to Emergency Planning and Response and Facility Security Risk Management;

b. Provides telephonic communications, space, logistics, and electronic communications services to Flight Standards headquarters divisions;

c. Manages the Aviation Safety Inspector Credentials Program;

d. Develops inspector en route policies and provides guidance to all Flight Standards divisions;

e. Manages the Flight Standards Employee Recognition Program and serves as focal point for the DOT/FAA National Awards Program;

f. Tracks and maintains records on employee Code of Ethics requirements and financial disclosure statements;

g. Provides contract and procurement oversight for Flight Standards headquarters divisions through the agency's PRISM system;

h. Supports the Key Infrastructure Services project; and

3. Financial Resources Management Branch. This branch, AFS-120, is responsible for the budget execution of AFS operations and AVS F&E appropriations, and other fiscal management work functions. In this regard the branch:

a. Executes the Flight Standards operations budget and develops budget policy and guidelines for headquarters and regional divisions;

b. Manages PC&B policy and utilization for Flight Standards;

c. Executes the AVS F&E budget and develops budget policy and guidelines for headquarters and regional divisions;

d. Conducts periodic spending reviews and oversight of AFS budget resources in the operations account;

e. Conducts periodic spending reviews and oversight of AVS F&E budget resources;

f. Provides guidelines to AFS headquarters and regional offices for agency financial systems that impact fiscal management; and

g. Conducts periodic reviews of financial management processes in AFS.

4. Human Capital Resource Management Branch. This branch, AFS-130, provides policy and guidance on human resource management to both AFS headquarters and regional divisions. In this regard, the branch:

a. Assists Flight Standards in recruiting, selecting, placing, retaining, classifying, and training employees;

b. Develops pay and leave policies and provides guidance to Flight Standards divisions;

c. Manages employee incentive awards programs;

d. Provides guidance on all model work environment issues;

e. Provides guidance on employee conduct and discipline procedures;

f. Provides guidance on worker's compensation procedures and issues;

g. Oversees the issuance of security clearances to Flight Standards employees according to agency procedures; and

h. Manages the national Position Review Board to ensure the proper application, consistency, and equity in determining the appropriate career level definition for Flight Standards field and regional inspector positions and unique positions.

5. Technical Information and Communications Programs Branch. This branch, AFS-140, provides guidance on and oversight of various department, agency, and Flight Standards information processes. In this regard, the branch:

a. Serves as Flight Standards Records Management Officer. Provides guidance and assistance to Flight Standards offices on records management activities;

b. Manages all Flight Standards executive level correspondence and responds to public inquiries received through www.faa.gov in accordance with agency guidelines; and provides guidance on the agency's plain language and branding requirements and standards;

c. Serves as the focal point on foreign travel requests;

d. Serves as the clearance point for Whistleblower Protection Program correspondence;

e. Serves as the point of contact on Flight Standards reports to Congress;

f. Serves as Flight Standards Directive Management Officer;

g. Serves as the focal point on organizational changes/issues for Flight Standards headquarters and regions. Responsible for control, revalidation, and revision of Order FS 1100.1;

h. Serves as Flight Standards Forms Officer;

i. Serves as the focal point for GAO and DOT Office of the Inspector General (OIG) audits;

j . Manages employee suggestions;

k. Serves as the focal point on Freedom of Information Act and Privacy Act;

1. Tracks and processes NTSB Safety Recommendations and FAA Safety Recommendations;

m. Serves as the program office for the design, development, and implementation of business requirements for FAA Order 8900.1, Flight Standards Information Management System (FSIMS);

n. Provides AFS Web management, development, and support; and

o. Provides AFS Dashboard management, development, and support.

6. New Technology Development Branch. This branch, AFS-150, helps develop, modernize, and maintain the architecture of the National Airspace System (NAS) and provides the Associate Administrator for AVS with system engineering, economic analysis, and operations research capabilities to enhance the development and integration of new technologies and procedures into the NAS. In this regard, the branch:

a. Conducts new technology systems assessments;

b. Develops the F&E programs linkages to the FAA Flight Plan;

c. Provides technical program plan consulting services to all of AVS;

d. Provides AVS economic analysis and Operational Research Analysis;

e. Manages AVS F&E budget formulation processes and provides new technology systems assessments;

f. Support AVS-1/2 on the Joint Resource Council;

g. Provides guidance on Acquisition Management System and Life Cycle Management Policy;

h. Participates in FAA Capital Investment Plan Management;

9/19/08 FS1100.1A

i. Provides RE&D process management; and

j . Manages Sharepoint site development within AVS.

7. Planning and Performance Management Branch. This branch, AFS-160, provides planning and performance management functions for AFS. In this regard, the branch:

a. Develops an AFS annual performance plan and quarterly accomplishment reports;

b. Provides guidance on development of performance goals and targets;

c. Oversees AFS LDR project and task codes and provides user support;

d. Formulates and justifies the AFS Operations budget;

e. Establishes staffing targets and develops staffing reports;

f. Conducts various technical analyses and supports agency employee surveys.

RESERVED. Paragraphs 8 thru 18.

Chapter 4. Air Transportation Division, AFS-200

Chapter 4. Air Transportation Division, AFS-200

1. Air Transportation Division. This division:

a. Is responsible for regulations and policy recommendations governing certification and operations aspects of air carriers and commercial operators of large aircraft (private carriers operating for compensation or hire); air agencies (aircraft dispatcher, Flight Engineer (FE), and flight navigator-approved schools); and air carrier airmen (airline transport pilots, aircraft dispatchers, FEs, and flight navigators). This division is also responsible for management and oversight of the National Simulator Program (NSP) and air carrier insurance certification function.

b. With respect to the foregoing, the division:

(1) Develops and recommends national policies, standards, systems, procedures, and program plans.

(2) Determines the need for, justifies, and formulates new or amended CFRs, supplementary regulatory material, and grants or denials of exemption petitions; participates in regulatory review programs; and develops OpSpecs.

(3) Advises the Director, the Associate Administrator, and other principal officials, and serves as a point of contact for the aviation community on matters related to its program areas at the national level.

(4) Participates in the analysis and evaluation of the field execution of programs.

(5) Determines the need for and recommends research and development projects.

(6) Guides and assists the other divisions, the regions, and other elements of the agency in the conduct of the related programs; provides guidance on applying agency policies, standards, and procedures pertaining to current safety issues.

(7) Develops, coordinates, and issues national directives to provide technical guidance on policies and procedures.

(8) Develops operating requirements and technical standards.

(9) Initiates, recommends and coordinates actions to resolve safety problems resulting from accidents and incidents.

c. Oversees development and maintenance of aircraft simulator and flight training device (FTD) qualification standards and criteria.

d. Develops, coordinates, and recommends career development programs to ensure organizational competency for employees in the division.

2. National Simulator Program. This branch, AFS-205, is under the direct line authority of the division. The principal domicile for the NSP is Atlanta, Georgia. NSP consists of personnel

trained as simulator evaluation specialists and simulator engineers. The NSP is responsible for setting criteria and standards for initial qualification and the conduct of recurrent evaluations for aircraft, rotorcraft, and vertical lift simulators. The NSP is also responsible for initial and recurrent evaluations of level six and seven FTDs. The NSP provides initial evaluation of reference data for level four and five FTDs, if required, and provides technical assistance to the Flight Standards District Office (FSDO) that has responsibility for approval of the FTDs. The NSP designates simulator evaluation specialists to serve as operations members and active participants on the FSB and the FOEB. The NSP manager:

a. Plans, directs, and controls the activities of the NSP.

b. Reports to the division manager and serves as the national focal point for all matters pertaining to the functions and responsibilities of the NSP.

c. Develops and administers all policy matters, directives, and advisory material relating to aircraft simulator and FTD standards for evaluation and qualification.

d. Recommends and initiates rulemaking projects related to simulators and FTDs.

3. Air Carrier Training and 142 Training Center Branch. This branch, AFS-210, is the principal element of the division with respect to managing, directing, planning, organizing, coordinating, developing, and evaluating national standards, policies, and procedures relating to parts 121, 135, and 142 training and qualification for crewmembers, aircraft dispatchers, and certain other operations personnel. The branch is responsible for the following functions:

a. Evaluating current regulations and assisting with the development of new regulations and amendments thereto, within the functional areas described above.

b. Determines the need for, provides justification, and assists in the development of new airline transport pilot (ATP), FE, flight navigator, and aircraft dispatcher certification regulations, and amendments thereto.

c. Develops policy covering training operations of flight simulation devices used by air carriers and part 142 training centers.

d. Provides guidance to and formulates training policies for Cabin Safety and other operations inspectors in field offices regarding training and qualification of Flight Attendants (F/A) (including policy on the use of cabin attendants in applications that do not require a F/A by regulation).

e. Functions as the division focal point for ICAO aircrew training and training center issues.

f. Represents the division in international meetings to further U.S. interests and to develop international standards and recommended practices pertaining to aircrew training and part 142 training centers.

g. Develops policy and procedures for FAA Aircrew Program Managers (APM), air carrier Aircrew Program Designees (APD), training center evaluators (TCE) and other designees associated with air carrier training programs.

h. Sponsors research and maintains continuing liaison with industry and operating segments of the FAA to determine trends and developments affecting training standards, and the usage and training of designees.

i. Provides technical guidance and policies on part 142 training center matters.

j . Develops standard Training Specifications for part 142 training centers.

k. Provides operational guidance support for the implementation of certification, operations, and surveillance policy, and regulations pertaining to part 142 training centers.

1. Monitors the division's operational activities to ensure appropriate training support is included in new and amended rules and exemption projects.

m. Prioritizes air carrier and part 142 training center regulatory activities for timely completion of division and FAA commitments and industry needs.

n. Conducts research and maintains continuing liaison with industry and operating segments of the FAA to determine trends and developments affecting training standards for pilots, F/As, aircraft dispatchers and flight navigators, and the usage and training of designees who are authorized to test or check such personnel.

o. Drafts and reviews applicable additions and changes to FAA Order 8900.1 which pertains to training and certification of airmen and crewmembers (pilots, F/As, FEs, and aircraft dispatchers).

p. Works in partnership with headquarters' organizations to effect proposed changes to regulations, FAA orders, and FSIMS with respect to the testing and certification of airmen and operations of part 142 training centers.

q. Acts as the division's representative on the Curriculum Oversight Team (COT) and is the division's focal point for the Course Mentor program.

r. Maintains liaison with the Flight Standards Training Division, AFS-500, and provides technical oversight of division-sponsored courses for field personnel.

s. Develops non-Advanced Qualification Program (AQP) air carrier training and part 142 qualification policy for pilots and F/As, aircraft dispatchers, and certain other operations personnel.

t. Determines the need for and justification of the development of ground instructor and flight instructor qualification requirements as they pertain to part 142 training.

u. Meets and coordinates with the aviation community on air carrier training and part 142 training center matters.

v. Provides operational support in implementing training policy and regulations.

w. Responds to air carrier and part 142 training related queries originating internally from FAA sources and externally from other government organizations, industry and the public as those queries pertain to air carrier training, and part 142. Within its area of responsibility, AFS-210 will:

(1) Provide responses to NTSB Safety Recommendations;

(2) Provide responses to FAA Safety Recommendations;

(3) Provide responses to GAO audits and OIG audits;

(4) Provide and/or review changes to FAA Order 8900.1 as they affect air carrier training and part 142 training center activities (including Cabin Safety and Aircraft Dispatch Inspectors);

(5) Draft and/or review training related notices, safety alerts for operators (SAFO), and InFOs;

(6) Host TOPIC and part 142 training center teleconferences; and

(7) Provide customer service regarding training issues.

4. Air Carrier Operations Branch. This branch, AFS-220, is the principal element of the division with respect to managing, directing, planning, organizing, coordinating, developing, and evaluating operational policies and guidance for air carriers operating under part 121. The branch develops and provides subject matter expertise regarding new or amended rules and grants or denials of exemptions involving the operations aspects of part 61 ATP, parts 63 and 65 (with respect to FEs, flight navigators, and aircraft dispatchers), and part 121. It is responsible for the following functions:

a. Determines the need for, provides justification, and assists in the development of new regulations and amendments within the functional areas described above. .

b. Provides policy guidance concerning use of foreign aeronautical information publications by U.S. air carriers.

c. Develops operational policy regarding crewmembers (pilots and F/As) and aircraft dispatchers in part 121 operations.

d. Provides operational support for cabin safety research and development activities.

e. Functions as the division focal point for ICAO operational issues related to part 121.

f. Develops standard OpSpecs for part 119 and 121 operators.

g. Functions as the division focal point for matters pertaining to part 139 and the certification of airports.

h. Analyzes and evaluates the effectiveness of division policy in assigned program areas.

i. Provides operational support in implementing certification, operations, and surveillance policy and regulations pertaining to part 121 operators.

j . Provides project specialists to participate as team leaders in developing and processing the division's rulemaking projects, and as team members for other FAA rulemaking activities.

k. Conducts technical evaluations and develops exemptions in response to petitions by industry and the public.

1. Provides guidance to and formulates policy for ASIs (Operations and Cabin Safety) in field offices on:

(1) Aircraft evacuation and evacuation demonstration;

(2) Carriage of animal issues;

(3) Management of passengers;

(4) Passenger briefing and safety demonstration;

(5) Development of passenger safety briefing cards;

(6) Hijack and duress procedures;

(7) Cabin emergency procedures such as ditching, fire and emergency landing; and

(8) Other cabin safety issues that may be raised at the field level.

m. Provides guidance and formulates policy for ASI (Dispatch) in field offices on:

(1) Operational control;

(2) Dispatch procedures; and

(3) Management of designees.

n. Monitors division activities to ensure that proper operational considerations are included in new and amended rules and exemption projects.

o. Prioritizes division regulatory activities to ensure timely completion with respect to division and FAA commitments, and to industry needs.

p. Develops ACs, SAFOs, InFOs, and directives pertaining to air transportation functions within its area of expertise.

q. Consults with and advises district offices or regions concerning the operational aspects of new or amended rules or exemptions.

r. Serves as the coordination point for all division regulatory and exemption activities with the Office of Rulemaking (ARM), AGC, and other FAA lines of business.

s. Represents the division in international meetings to develop international standards and recommended practices for air carrier operations. Maintains a high level of awareness of current ICAO regulations and operator practices.

t. Establishes policy and gives direction on administering the Extended Range Operations with Two-Engine Airplanes (ETOPS) program as the AFS focal point for all ETOPS approval. Develops policy related to ETOPS and coordinates with industry through the Air Transport Association of America ETOPS subcommittee. Provides support to the Joint Aviation Authorities ETOPS working group on identified harmonization issues. Serves as the focal point for the review, analysis and disposition of all deviation requests.

u. Serves as FAA coordinator on all EASA operational policy and rulemaking development. Represents AFS during combined working group activities and is responsible for internal FAA coordination of related information and harmonization issues.

v. Serves as FAA liaison to the Transportation Security Administration (TSA) on matters concerning the air carrier operational requirements and associated airworthiness issues, operational control, F/A duties, cabin procedures, carry-on baggage, passenger handling, carriage of cargo, HAZMAT/dangerous goods, training of crewmembers and dispatchers, and any other related operational issues.

w. Determines the need and justification for the development of new pilot ATPC, FE, flight navigator, and aircraft dispatcher certification regulations, and amendments.

x. Analyzes recommendations and prepares required response to the National Transportation Safety Board (NTSB) concerning their findings following an accident investigation,

y. Responds to field office's recommendations and takes appropriate action.

5. Voluntary Safety Programs Branch. This element of AFS is physically located at Dulles International Airport, Suite 203A, 45005 Aviation Drive, Dulles, VA 20166-7560. The postal mailing address is P.O. Box 20027, Washington, DC 20041. This branch, AFS-230, is responsible for all matters and business processes pertaining to the development and execution of the AQP, the Flight Operational Quality Assurance (FOQA) Program, the Aviation Safety Action Program (ASAP), the Voluntary Disclosure Reporting Program (VDRP), the Aviation Safety Reporting Program (ASRP), the Internal Evaluation Program (IEP), and guidance materials for the Line Operations Safety Audit (LOSA) program. In addition, the branch maintains the Runway Incursion Information Evaluation Program (RIIEP) database. The branch:

a. Develops and recommends national policies related to the voluntary safety programs listed above and the associated training, qualification, and certification requirements for

crewmembers, aircraft dispatchers, and certain other operations personnel. Writes advisory circulars, handbook chapters, and related guidance materials to promulgate current information to the field and the public on assigned programs. Maintains the content of FAA Web sites for assigned programs.

b. Serves as the office of primary responsibility for the development of new regulations or amendments to existing regulations pertaining to assigned programs.

c. Plans, directs, controls, and evaluates these and other programs as assigned.

d. Develops, coordinates, and implements guidance materials for innovations in applicable training and safety programs.

e. Designs, develops, implements, and operates electronic data acquisition systems employed for the collection, analysis, archiving, and distribution of safety-related data in assigned programs.

f. Receives data from both ground-based training/checking activities and airborne line operations. Conducts analysis of such data to validate air operations personnel proficiency requirements, training and qualification program effectiveness, and associated regulatory provisions. Establishes data-driven quality control procedures for the qualification and certification of crewmembers, dispatchers, and certain other operations personnel. Distributes data and reports to FAA field offices and program participants.

g. Identifies pilot training and air transportation human factors research requirements, prepares necessary initiating documentation, coordinates project implementation, and provides technical oversight of in-house studies, contracts, and grants for pilot training and air transportation human factors research. Interfaces directly with FAA and other research and development organizations to perform such functions.

h. Recommends and evaluates new technology for use in aviation training and voluntary safety programs.

i. Develops and evaluates new performance measurement methodologies for the proficiency assessment of crewmembers, dispatchers, and certain other operations personnel.

j . Provides technical assistance to FAA field offices and airlines for the implementation of assigned safety programs and air carrier training and qualification program policies, standards, procedures, and regulations.

k. Interfaces, as required, with AFS field organizations having direct oversight responsibilities for program participants, to coordinate and monitor compliance with program requirements.

1. Conducts liaison activities with airline industry and labor representatives as required for the effective implementation of assigned programs.

9/19/08 FS1100.1A

m. Sponsors and conducts periodic conferences and seminars to educate industry, labor, and the public on current developments in assigned programs.

n. Develops AQP part 121 and part 135 training and qualification policy for crewmembers, aircraft dispatchers, and certain other operations personnel.

0. Conducts on-site program reviews for AQP and ASAP.

6. 135 Air Carrier Operations Branch. This branch, AFS-250, is the principal element of the division with respect to managing, directing, planning, organizing, coordinating, developing, evaluating national standards and policies, and processing or amending rules or exemptions related to part 135 on-demand and commuter operations, to include, fixed wing and helicopter operations, Helicopter Emergency Medical Service (HEMS) operations, cargo operations and all commercial air tour operations. The branch is responsible for the following:

a. Determines the need for, provides justification, and assists in developing new regulations and amendments within the functional areas described above.

b. Provides policy guidance concerning use of foreign aeronautical information publications by part 135 operators and air carriers.

c. Functions as the division focal point for ICAO operational issues related to parts 135 and rotary wing aircraft.

d. Develops standard and revises OpSpecs for part 119 and part 135 operators.

e. Develops guidelines within its assigned program areas.

f. Analyzes and evaluates the effectiveness of division policy in assigned program areas.

g. Meets and coordinates with the aviation community on matters within its areas of responsibility.

h. Provides operational guidance support for the implementation of certification, operations, and surveillance policy, and regulations pertaining to part 135 operators.

i. Provides project specialists to participate as team leaders in developing and processing the division's rulemaking projects, and as team members for other FAA rulemaking activities.

j . Conducts technical evaluations for exemptions in response to petitions by industry, the public and certificated persons.

k. Monitors division activities so proper operational considerations are included in new and amended rules and exemption projects.

1. Prioritizes division regulatory activities for timely completion of division and FAA commitments and industry needs.

m. Participates in developing ACs, SAFOs, InFOs, and directives pertaining to part 135 air transportation functions.

n. Consults with and advises district offices and regions concerning the operational aspects of new or amended rules and exemptions related to assigned program areas.

o. Serves as the coordination point for all part 135 branch regulatory activities with ARM, AGC, and other FAA lines of business.

p. Represents the division in international meetings to further U.S. interests and to develop international standards and recommended practices pertaining to part 135 operational issues.

q. Determines the need for and justification of the development of new commercial pilot and airline transport pilot certificates, and ratings pertaining to part 135 operations.

r. Analyzes and evaluates the effectiveness of division policy in assigned program areas.

s. Analyzes recommendations and prepare required responses to the NTSB concerning its findings after an accident investigation.

t. Analyzes part 135 FAA Safety Recommendations and takes appropriate action,

7. Technical Programs Branch. This branch, AFS-260, is the principal element of the division with respect to the management of division automation and the project management program. It is responsible for the following:

a. Flight Operations Evaluation Policy Board. Administers the board's functions in developing policy for the minimum equipment list (MEL) program.

b. Master Minimum Equipment List (MMEL). Administers the program for the development of lists of equipment and instruments that may be inoperative on U.S.-registered airplanes and helicopters. Develops policy for the MMEL program by coordinating with the AEG, operators, maintenance personnel, and industry group.

c. MEL. Provides direction through handbooks/manuals on approval of MELs and the administration of the MEL program. Administers the program for the development of lists of equipment and instruments that may be inoperative on U.S.-registered airplanes and helicopters.

d. FSB. Establishes policy and administers the program for the FSB in developing training requirements for new aircraft to be operated by U.S. operators.

e. FOEB. Establishes policy for the FOEB in the development of MELs for aircraft.

f. NTSB. Analyzes recommendations and prepare required response to the NTSB concerning its findings following an accident investigation.

g. FAA Safety Recommendations. Analyzes field office recommendations and takes appropriate action.

h. OPSS. Reengineers and modernizes the OPSS for development and issuance of an air carrier's OpSpecs as the final step in the certification process.

(1) Functions as the Flight Standards focal point for all OpSpecs issues.

(2) Develops policy related to OpSpecs, coordinates with industry through appropriate working group and policy divisions, and facilitates the dissemination of changes and reference materials.

(3) Provides support to the OpSpecs working group on identified harmonization issues. Coordinates with regional division managers, district office managers, principal inspectors (PI), and industry to ensure standardization, compatibility, adequacy, and operational acceptability for standard and nonstandard paragraph policy issues.

(4) Analyzes, coordinates, and responds to all nonstandard paragraph issues. Provides written and oral recommendations for conversion of a nonstandard paragraph to a standard paragraph.

(5) Provides support to inspectors, divisions, and branches in the area of the OPSS.

i. Title 14 CFR Part 298 Authority. Responsible for approval, policy development, tracking, and issuance of part 298 authority. Maintains data for part 121, 129, and 135 insurance.

8. Program Management Support Branch. This branch, AFS-290, is the principal element responsible for strategic and tactical planning, fiscal and human resource management, program management and analysis, information management, and general administrative management of the division. The branch is responsible for the following:

a. Provides advice, counsel, and program support to division management on management systems, processes, procedures, principles, and methodologies; strategic and tactical planning; matrix and participative management; and program analysis; evaluation, success metrics, and quality assurance measures.

b. Develops and implements division policies, programs, processes, and procedures governing administrative, fiscal, and human resource management to include but not limited to time and attendance data entry, training requirements, travel, budget, program planning, and program reporting.

c. Provides administrative management support for the division's management team for general paperwork management (correspondence, records, forms, reports, directives), contract management and support, general office services, and logistical support.

d. Monitors and reports on the progress of responses for White House Reports, Congressional requests for action, requests under the Freedom of Information Act, and the Government Performance and Results Act, NTSB recommendations, and FAA Safety Recommendations.

e. Monitors the cost accounting system/labor distribution reporting activities for the division.

f. Manages the production of all division publications, including those on FSIMS.

g. Acts as the division focal point for matters pertaining to knowledge sharing network and sharepoint management and input.

h. Serves as the division's focal point for all external audits and quality assurance assessments of divisional programs.

i. Prepares and submits one-time and recurring informational reports as required.

RESERVED. Paragraphs 9 thru 19.

Chapter 5. Aircraft Maintenance Division, AFS-300

Chapter 5. Aircraft Maintenance Division, AFS-300

1. Aircraft Maintenance Division.

a. This division is responsible for regulations and national policy governing the certification, inspection, and surveillance of the maintenance aspects of general aviation air carrier and commercial operators, airmen (mechanics, repairmen, designees, parachute riggers), and air agencies (Aviation Maintenance Technician Schools (AMTS), and repair stations), and maintenance requirements, performance standards, and practices applied to ensure the continued airworthiness of civil aircraft.

b. With respect to the foregoing, the division:

(1) Develops and recommends national policies, standards, systems, procedures, and program plans.

(2) Determines the need for, justifies, and formulates new or amended regulations and supplementary regulatory material and participates in regulatory review programs.

(3) Recommends grants or denials of exemptions.

(4) Develops OpSpecs.

(5) Advises the agencies' officers and executives, and other principal officials, and serves as a point of contact for the public and the aviation community on technical matters appropriate to the national level.

(6) Determines the need for and sponsors research and development projects.

(7) Guides and assists other divisions, the regions, and other elements of the agency in the conduct of related programs, and provides guidance on applying agency policies, standards, and procedures pertaining to aircraft maintenance safety issues.

(8) Represents the service in developing international agreements, arrangements, policies and practices involving maintenance of civil aircraft and certification of foreign airmen and air agencies.

(9) Develops, coordinates, and issues national directives to provide technical guidance on policies and procedures.

(10) Recommends, initiates, and coordinates regulatory and policy action to resolve safety problems resulting from accidents, incidents, occurrences, and other sources.

c. Assigns special technical projects, recommends priorities, and provides broad policy and program guidance to ensure the adequacy of maintenance program development activities performed by the Regulatory Support Division.

d. Recommends final action on requests for reconsideration or original issuance, amendment, or denial of a maintenance airman or air agency certificate.

e. Recommends final action on any petition for reconsideration or original issuance, amendment, or denial of OpSpecs pertaining to maintenance or continued airworthiness of aircraft.

f. Develops standards, policies, and procedures for examining and appointing private persons to act as representatives of the Administrator, under the provisions of 49 U.S.C, sections 44702 and 45303, with respect to the maintenance and continued airworthiness of civil aeronautical products.

g. Establishes policies and procedures and recommends final action on granting or denying exemptions under 49 U.S.C, section 44711, to foreign airmen who are directly in charge of inspection, maintenance, overhaul, or repair of aircraft, aircraft engines, propellers, appliances, or components.

h. Establishes policies and procedures and recommends final action on granting or denying deviations under part 119 for directors of maintenance and chief inspectors.

i. Develops 14 CFR, coordinates, and recommends career development programs to ensure organizational competency for employees in this division.

j . Develops, coordinates, recommends, and supplies support materials and procedures to the FAASTeam for all maintenance-related topics.

2. Program Management and Information Branch. This branch, AFS-310, is the principal element of the Aircraft Maintenance Division with respect to administrative services, planning and organizing of special projects, budgeting, and tracking and reporting on all division projects. It is responsible for the following functions:

a. Provides direct staff assistance to the division manager in the development, planning, implementation, and measurement of the division strategic and tactical management initiatives.

b. Provides a central focal point for administrative service areas of personnel management, training, organization, staffing, tracking systems, and related programs.

c. Serves as the focal point when rapid responses are required by internal and external customers.

d. Coordinates and tracks responses to high-level Congressional and industry studies and reports.

e. Project control center for administering the status/control systems covering correspondence and monitoring of division program accomplishments to assess achievements of long-range goals and objectives. Prepares reports and presentations for management in evaluating progress.

f. Provides a central focal point for managing and monitoring the development, coordination, and issuance of AFS national policy directives, bulletins, and AC guidance material.

g. Serves as the coordination point for all division regulatory activities with the ARM, AGC, and other FAA elements.

3. Special Programs Branch. This branch, AFS-320, is responsible for the following functions:

a. Provides technical assistance and support for special programs such as Aging Aircraft, rulemaking projects, Damage Tolerance, Repair Assessment Programs, Corrosion Prevention and Control Programs, Structural Maintenance Programs, Department of Defense (DoD) programs, Commercial Aerial Refueling, and other programs and/or reviews mandated by

Congress.

b. Provides technical support and guidance in the development of regulations, standards, policies and procedures, letters, notices, orders, handbook changes, and ACs in this area of responsibility.

c. Sponsors and provides oversight of safety and educational programs related to its area of specialization for aging aircraft rulemaking projects to include an enhanced airworthiness program for airplane safety, wide-spread fatigue damage, damage tolerance, and repair assessment programs, a corrosion prevention and control program, and structural maintenance programs, and inspections and records reviews required by Congressional mandate.

d. Represents the division in international meetings to further U.S. interests and to develop international standards and recommended practices. Participates as a member of policy boards, including interagency and industry workgroups to include national and international standards, procedures, and policies.

e. Reviews, analyzes, prepares, and processes required reports, recommends amendments to regulations, grants or denies petitions for exemption and rulemaking, and participates in rulemaking, as related to branch functions.

f. Develops guidance materials and presentations to upper management and industry groups to present Flight Standards positions across other lines of business.

4. Air Carrier Maintenance Branch. This branch, AFS-330, is the principal element in the division with respect to all air carrier maintenance issues. In this respect, the branch is responsible for developing, managing, directing, planning, organizing, coordinating, and evaluating regulations, national and international standards, policies and procedures related to the certification and surveillance of operators and the continued airworthiness of related aircraft. These activities include, but are limited to, the following:

a. Develops regulations, standards, policies and procedures, letters, notices, orders, and ACs.

b. Evaluates the effectiveness of the CFR's policy and procedures, related to the branch's area of responsibilities.

c. Reviews, analyzes, prepares, and processes required reports, recommends amendments to regulations, grants or denies petitions for exemption and rulemaking, and participates in rulemaking for 14 CFR parts 119, 121, and 135, as related to branch functions.

d. Participates as a member of policy boards, including the MRB and the FOEB,

e. Provides technical assistance and guidance to other segments of the FAA, Federal, State, and local government agencies, and foreign Civil Aviation Authorities (CAA).

f. Sponsors and provides oversight of safety and educational programs related to its area of specialization for air carrier aircraft, including determining the criteria for maintenance training for field personnel.

g. Represents the division in international meetings to further U.S. interests and to develop international standards and recommended practices for ICAO.

h. Has primary responsibility for policy relating to the service difficulty reporting (SDR) and mechanical interruption summary reporting, as related to parts 119, 121, and 135 carriers.

i. Is responsible for the development of OpSpecs as related to its area of responsibility.

5. Repair Station Branch. This branch, AFS-340, is the principal element in the division for all repair station regulations, national airworthiness procedures, and policies.

a. The branch will develop, manage, direct, plan, organize, coordinate, and evaluate regulations, national and international standards, procedures and policies for the certification, surveillance, and performance of domestic and foreign certificated repair stations under 14 CFR part 145.

b. The branch:

(1) Develops, implements, and evaluates standards, program policies, and procedures for the certification and surveillance programs of foreign/domestic repair stations.

(2) Establishes national/international airworthiness performance standards and guidance, and procedures for maintenance of repair station activities.

(3) Develops regulations, standards, policies and procedures, letters, notices, orders, and ACs in its area of responsibility.

(4) Provides technical assistance and guidance to other agency elements concerning maintenance regulatory aspects of part 145. The branch also provides this service to other Federal, State, and local governments.

(5) Develops OpSpecs and management specifications (MSpecs) for its area of responsibility.

6. General Aviation and Avionics Branch.

a. This branch, AFS-350, is the principal element in the division for all general aviation maintenance, avionics, airmen, designees, and technical training regulations, national and international standards and policy and procedures as they apply to aircraft maintenance. The branch will develop, manage, direct, plan, organize, coordinate, and evaluate regulations, national and international standards, and policies and procedures for the certification, surveillance, and performance of the following:

(1) Airmen:

(a) Mechanic certificate,

(b) Repairman certificate,

(c) Inspection Authorization, and

(d) Parachute riggers.

(2) AMTSs.

(3) Various designated representatives of the Administrator (Designees) under 14 CFR parts 65, 147, and 184. To include:

(a) Designated Airworthiness Representative,

(b) Organization Designation Authority,

(c) Designated Maintenance Examiner, and

(d) Designated Parachute Rigger Examiner (DPRE).

(4) Large/small aircraft (non-air carrier) and operating certificate holders under 14 CFR parts 91, 125, 133, and 137 for airframes, powerplants, propellers, appliances, and related systems.

(5) Mechanics with inspection authorization.

(6) General aviation maintenance operations under 14 CFR parts 43 and 91.

(7) All avionics, including instruments, related matters (under 14 CFR parts 43, 91, 125, 129, 133, 135, 137, 145, 147, and 183).

b. The branch is the focal point in the division for the establishment of standards and guidance, and procedures for the airworthiness of avionics and instrument equipment and systems. The branch is also the division's focal point on technical training issues. These activities include, but are not limited to, the following. The branch:

(1) Develops regulations, standards', policies and procedures, letters, notices, orders, handbooks, and ACs in its area of responsibility.

(2) Develops, implements, and evaluates standards, program policies, and procedures for the certification and surveillance programs of AMTSs, maintenance airmen, and designees.

(3) Establishes national/international airworthiness performance standards and guidance, and procedures for avionics and new and emerging technology.

(4) Provides technical assistance and guidance to other agency elements concerning maintenance regulatory aspects of parts 65, 147, and 183. The branch also provides this service to other Federal, State, and local governments.

(5) Evaluates (as the division's point of contact) technical training courses offered to ASIs, coordinates course monitoring with other division branches, and recommends course design, course enhancements, and improvements. It works with other division branches on training issues and concerns, and also works with training contacts outside of the division, as well as external to the FAA, to develop and improve training courses.

(6) Sponsors and provides oversight of safety and educational programs for avionics systems, and determines maintenance training criteria for field personnel.

(7) Evaluates the efficiency of program policies and procedures in its areas of responsibility.

(8) Develops national procedures used by field offices for the proper certification of certificate holders operating general aviation aircraft.

(9) Develops policy and procedures for the malfunction or defect reporting (M or D) system, and evaluates the effectiveness for all general aviation aircraft.

(10) Develops, implements, and evaluates standards, procedures, policies, and programs for the maintenance, alteration, and continued airworthiness of aircraft used by pilot schools, external-load operators, special purpose, agriculture operators, and operating certificate holders under 14 CFR part 125.

(11) Provides technical assistance and guidance to other agency elements concerning maintenance regulatory aspects of parts 43, 91, 125, 133, and 137. The branch also provides this service to other Federal, State, and local governments.

(12) Provides technical assistance and guidance to other agency elements concerning maintenance regulatory aspects of 14 CFR parts 21, 23, 25, 27, and 29 regarding data approvals for repairs and alterations.

(13) Provides technical assistance and guidance to other agency elements concerning regulatory aspects related to fractional ownership inspection programs and other maintenance.

(14) Sponsors and provides oversight of safety and educational programs related to its area of specialization for general aviation aircraft, including determining the criteria for maintenance training for field personnel.

RESERVED. Paragraphs 7 thru 17.

Chapter 6. Flight Technologies and Procedures Division, AFS-400

Chapter 6. Flight Technologies and Procedures Division, AFS-400

1. Flight Technologies and Procedures Division. The Flight Technologies and Procedures Division, AFS-400, is responsible for regulations and policy recommendations governing instrument flight procedures, and safety, capacity, and efficiency improvements based on advanced technology and innovative operational concepts. AFS-400 develops standards and criteria for communication, navigation, and surveillance (CNS) flight systems and new technology operations and training requirements. This division includes FAA chief scientists for simulator engineering and wake turbulence, providing FAA leadership domestically and internationally in these areas. It serves as the AFS focal point for NAS capacity, aviation weather programs, and emerging business practices to improve flight operations, standardization, and aviation safety within the NAS and international airspace system. The division:

a. Develops operating concepts, policies, requirements, criteria, and procedures for new system evaluations, integration, and implementation of emerging flight technologies.

b. Determines requirements and formulates new or amended regulations and supplementary regulatory policy; participates in regulatory review programs; recommends grants or denials of exemptions; and provides guidance for OpSpecs requirements for new flight systems.

c. Advises the Director, the Associate Administrator, and other Government officials, and serves as the primary representative to the aviation community regarding CNS flight technologies, and instrument flight procedures programs.

d. Determines the requirements and recommends research and development (R&D) programs.

e. Provides guidance to divisions, regional offices, and agency organizations regarding the implementation and conduct of new flight technologies; advises on application of agency policies, standards, and procedures as they relate to implementation of new flight technologies and safety enhancement programs.

f. Represents the AFS and/or the FAA in international meetings to further U.S. interests and develop ICAO standards and recommended practices for flight technologies and procedures.

g. Develops, coordinates, and issues national directives and policy for CNS and instrument flight operations.

h. Recommends, initiates, and coordinates regulatory and policy actions to resolve flight safety problems associated with flight technologies and procedures, and identified through system analysis, accident, incident, or other system reports,

i. Assigns flight technologies and procedures projects (other than rulemaking) with recommended priorities and provides technical and operational policy, guidance, and direction to the Regulatory Support Division, AFS-600.

j . Develops concepts, rules, standards, criteria, and policy governing the operational aspects of en route, terminal, and instrument flight procedures; evaluates and determines disposition of

9/19/08 FS1100.1A

requests for waiver of standards for terminal and en route instrument flight procedures; provides the AFS focal point for airspace activities; provides final approval for all Special Instrument Flight Procedures.

k. Directs the AFS aviation weather program, and develops national aviation weather concepts, requirements, policies, criteria, and guidance for air navigation operations.

1. Provides technical advice and guidance on emerging cockpit CNS technologies implementation issues to all AFS AEGs. Participates in Flight Standardization Boards to provide advanced technology expertise in establishing operational standards, policy, and training requirements for new aircraft.

m. Provides technical advice and guidance to the Manager, National Simulator Program, AFS-205, on emerging cockpit CNS technologies implementation.

n. Provides technical advice and guidance to the Regional All Weather Operations Program Managers (AWOPM). Establishes the All Weather Operations (AWO) job tasks to ensure standardization of technical field work functions.

o. Directs the AFS Wake Vortex Program,

p. Directs the AFS Separation Standards Program, develops acceptable standards based upon collision risk and wake vortex issues, and provides those recommended standards to Air Traffic Organization (ATO) for consideration.

q. Maintains the AFS Flight Simulator Program and Flight Operations Simulation Laboratory.

r. Maintains the Flight Systems Laboratory (FSL).

s. Provides project management as the principal directing element with respect to surveillance and broadcast services across all domains within AFS.

t. Develops, coordinates, and recommends career development programs for division employees.

2. Management Operations Branch. This branch, AFS-405, is responsible to the division manager for strategic and tactical planning, fiscal and human resource management, program management and analysis, information management, and general administrative management of the division. The branch:

a. Provides advice, counsel, and program support to the division manager and other members of the division's management team on management systems, processes, procedures, principles and methodologies; strategic and tactical planning; matrix and participative management; and program analysis, evaluation, success metrics, and quality assurance measures.

b. Develops and implements divisional policies, programs, processes, and procedures governing administrative, fiscal, and human resource management.

c. In accordance with established FAA administrative policies and procedures, provides administrative management support for the division's management team for correspondence control and general paperwork management, human and financial resource management, contract management, general office services, and logistical support.

d. Monitors and reports on the progress of responses for the NTSB, FAA Safety Recommendations, ICAO, and requests for information under the Freedom of Information Act.

e. Serves as the division's focal point for all external audits and quality assurance assessments of divisional programs.

f. Prepares and submits one-time and recurring informational reports as required.

g. Functions as leader of the Crisis Action Team.

h. Is responsible for the appropriateness, applicability, currency, and periodic revisions of the Flight Technologies and Procedures Division Standard Operating Procedures.

3. Flight Operations Branch. This branch, AFS-410, is the principal directing element of AFS-400 with respect to the direction, control, and execution of all flight operational aspects of instrument flight operations projects and other flight operations applications resulting from the introduction of new technologies and concepts. The branch:

a. Provides technical guidance to the other divisions, the regions, and the other elements of the agency on all operational and technical facets of instrument flight operations with emphasis on low visibility flight operations and associated programs, and provides technical assistance to other FAA elements, other Government agencies, industry, and international aeronautics organizations.

b. Appraises the extent to which instrument flight operational concepts, policies, standards, criteria, and procedures continue to be fully responsive to rapidly changing and expanding technology and programs.

c. Develops instrument flight operational concepts, policies, standards, criteria, requirements, specifications, and limitations for new and existing aircraft (all categories) and new and existing airborne, ground-based and space-based systems used in instrument flight operations, and develops and issues FAA Form 8260-10, Special Instrument Approach Procedure, as required, through the Procedures Review Board.

d. Is responsible for developing and maintaining the AFS-400 portion of the AFS Handbook(s). This handbook material will provide policies and procedures for CNS technology implementation and associated subjects.

e. Develops special flight technical concepts, policies, standards, procedures, interpretive material, and programs related to instrument flight operations, and conducts in-flight tests and evaluations of new concepts and procedures.

f. Develops concepts and criteria for design, evaluation, and approval of Category I, Category II, and Category III approach and landing operations (including operating minimums, required airborne or ground-based or space based equipment, and airports/runways), and serves as the technical policy authority for these operations. Provide requirements for appropriate OpSpecs, management specifications (MSpecs), or letters of authorization (LOA) to AFS-50, AFS-200, AFS-300, or AFS-800 for final coordination and approval.

g. Develops concepts and criteria for evaluation and approval of lower than standard takeoff minimums, and serves as the technical approval or disapproval authority for these standards.

h. Develops concepts and criteria for evaluation and approval of Surface Movement Guidance and Control System (SMGCS) operations, and serves as the final technical approval or disapproval authority for these operations.

i. In coordination with original equipment manufacturers, AIR, and AEGs, identify and enunciate explicit operating procedures for pilots using new-technology products. Provides guidance to develop OpSpecs/MSpecs/LOA requirements related to instrument flight operations, operating minimums, equipment, and training.

j . Provides technical representation to ICAO on matters related to instrument flight operations, and maintains liaison with foreign civil aviation operational and technical authorities to encourage the acceptance of U.S. instrument flight operations standards and to foster

standards with a level of safety consonant with those of the United States.

k. Provides the focal point for development of R&D programs related to instrument flight operations.

1. Reviews and validates regional recommendations for new or modified approach and landing navigation aids and lighting systems.

m. Assigns projects (other than rulemaking) with recommended priorities, and provides technical and operational policy, guidance, and direction to the Technical Operations Aviation System Standards (AJW-3) organization for the technical adequacy of special instrument flight operational activities performed by that office.

n. Determines the need for FAA requirements pertaining to navigation systems, navigation facilities, lighting systems, weather reporting devices, and other systems pertaining to the navigation and operation of aircraft in instrument flight operations; recommends R&D requirements for new or revised navigation systems and visual systems for use in instrument flight operations.

o. Analyzes and evaluates the technical adequacy of field execution of instrument flight operations programs; guides and assists other headquarters divisions, regional Flight Standards divisions, and other elements of the agency in the conduct of these programs; advises concerning the application of agency technical concepts, policies, standards, and procedures to current safety issues; reviews accident, incident, and enforcement investigations, and recommends appropriate corrective actions.

p. Serves as the principal organizational entity within AFS-400 for the development of new operating concepts in the NAS, including guidance for the use of appropriate new technologies and procedures to improve safety and efficiency.

q. Represents AFS in international meetings to further U.S. interests and develop ICAO Standards and Recommended Practices (SARPs) relating to flight technology issues. Maintains liaison with foreign civil aviation operational and technical authorities to encourage acceptance of U.S. CNS standards and matters related to complex and controversial special technical operations, and to foster standards with a level of safety consonant with those of the United States.

r. Serves as the AFS focal point for human factors issues relating to implementation of new flight technologies.

s. Serves as the focal point for AVS aviation weather programs and is responsible for developing and implementing national policies, criteria, standards, and guidance related to the operational aspects of the agency's aviation weather program.

t. Analyzes and evaluates field execution of special training programs related to flight technology; guides and assists the other divisions and the regions in the conduct of approved programs; advises concerning the application of agency technical concepts, policies, standards, and procedures to current safety issues; reviews accident, incident, and enforcement investigations involving assigned programs, and recommends appropriate corrective actions.

u. Maintains a project status, control and information system for NAS plans, R&D projects, and NTSB technical recommendations, as well as operational projects and programs undertaken by the division.

v. Provides technical advice and guidance to the regional AWOPMs. Establishes the AWO job tasks to ensure standardization of technical field work functions.

w. Serves as the focal point for developing the division's OJT policies, standards, criteria and gaining, as well as applicable, job specific training for incoming inspectors and contractors, and current inspectors and contractors. Also is the coordinator for managing completion of training requirements for division personnel.

4. Flight Procedure Standards Branch. This branch, AFS-420, is the principal element of AFS-400 for part 97, non-part 97 terminal instrument procedures, part 95 en route instrument procedures, the administration of the flight procedures and airspace program, and the direction, control, management, and program analysis of all instrument flight procedure standards and criteria development programs. The branch:

a. Develops rules, standards, policies, and criteria governing the operational aspects of en route, terminal, and instrument flight procedures (except air traffic control procedures).

Continue reading ↓ 120 of 197 passages shown