Radar Vectors
FAA Order Current Issued Aug 28, 2007 AIR-600 8 pages Copy saved Nov 17, 2026

Order 8150.4 Certification of Cargo Containers with Self-Contained Temperature Control Systems (Active ULDS)

Official source ↗ Open PDF

U.S. DEPARTMENT OF TRANSPORTATION ORDER FEDERAL AVIATION ADMINISTRATION 8150.4 National Policy

Effective Date:

8/29/07

SUBJ: Certification of Cargo Containers With Self-Contained Temperature Control

Systems (Active ULDs)

1. Purpose ofthis Order. This order will show you how to approve cargo containers that have a self-contained temperature control system for the container contents. We call cargo containers "unit

load devices," or ULDs. Cargo containers with self-contained temperature control systems are called active ULDs.

2. Audience. Federal Aviation Agency (FAA) aircraft ce1tification office (ACO) staffs.

3. Where Can I find this Order. You can find this order in the FAA Directive Management System at MyFAA employees website: bttps://employees.faa.gov/tools resources/orders notices/ or on the Regulatory and Gui.dance Library (RGL) website: http://rgl.faa.gov.

4. Deviations. Follow this order when approving active ULDs. Ifyou want to deviate from this order, you must coordinate with the Aircraft Engineering Division (AIR-100). We must approve the deviation.

Substantiate, document, and get conctu-rence from your manager to deviate before submitting it to AIR­

100.

S. Requirement5.

a. Active ULDs must folly meet all the requirements in the latest revision ofFAA technical standard order (TSO)-C90, Cargo Pallets, Nets, andContainers. Ifyou're approving a TSO application for an active ULD, you must also use current FAA policy on non-TSO function(s) integrated with a TSO article

to evaluate the active ULD temperature control system. Require applicants to perform a system safety assessment referring to practices in SAE ARP 4761 and furnish to the FAA a Functional Hazard Assessment (f"HA) and Failure Modes and Effects Analysis (FMEA) for the active ULD (including temperature control system) according to the latest revision ofadvisory circular (AC) 25.1309-1, System Design andAnalysis.

b. Data that we accept under current policy (on non-TSO 11.mctions) must address all the aspects listed in appendix 1ofthis order. Identify more aspects as appropriate, based on the specific design and limitations of the active ULD. You may accept foreign applications, ifthere is an applicable bilateral agreement with provisions for accepting all ofthe following:

( I) Appliance approvals (TSO), (2) Non-TSO functions, and (3) Transport category aircraft design data.

Distribution: A-W(IR/FS)-2; A-X(CD/FS)-2; A-FAC-0 (LTD): Initiated By: AIR-100 A-FFS-1, 2, 3. 5, 7, 8 (LTD)

Check the applicable bilateral to verify specific provision lang1.1age and limitations to determineifa foreign application can be accepted.

c. Current non-TSO functions policy gives you a means for collecting data supporting the additional functions within a TSO article. When approving the TSO article (the basic ULD only), you evaluate and accept the data collected for the non-TSO function (the environmental control system). Accepting the data means that we consider it valid. Approving the data for showing compliance to the applicable requirements is done during the installation. Generally for ULDs, the applicable installation requirements are operational regulations. In this case, we approve active ULDs under Title 14 ofthe Code ofFederal Regulations (14 CFR) § 2 l.305(d). The requirements in this order define a " ... manneracceptable to the administrator''.

d. We don't usually require an installation approval under a type certificate or supplemental type certificate (TC or STC), because ULDs are generally not part ofthe aircraft type design. However, if a

ULD is defined in the aircraft type design, then instead ofusing J4 CFR § 21.305(d), we evaluatethe data validated under tl1e non-TSO functions policy fur installati.on approval under the TC/STC process.

e. Inform applicants that air carriers wanting to use active ULDs approved to 14 CFR §21.305(d) must consult with their FAA Certificate Management Office (CMO) on operational requirements specific to their organization.

f. Info1m applicants that air carriers who offer, accept, or cany the ULD in transpo11ation must also comply wiih all applicable requirements ofthe US Department ofTransportation (DOT) Hazardous Materials Regulations, 49 CFR, parts I00-185.

g. Since active ULDs are generally not addressed in the aircraft design and certification, and there is currently no TSO that addresses all the safety aspects ofactive ULDs in transport category aircraft, we must apply careful scrutiny during the initial approval ofthe active ULD.

6. Background.

n. Historically, airlines have carried cargo in ULDs, which were containers or pallet-and-net combinations. Over the last year, ULD manufacturers have asked us to approve cargo containers that include a self-contained temperature control system for the contents--an active ULD. Active ULD temperature control systems can heat, cool, (or both) the containers to maintain a specific temperature. The temperature control systems are battery-powered, so active ULDs do not inteiface witl1 any airCl'aft systems for power. The goal for ULD manufacturers is for airlines to use active ULDs just as they currently use ULDs without temperature control systems.

b. In general, we approve ULDs to TSO·C90, which prescribes perfonnance standards for structural interface with the aircraft and flammability characteristics. TSO-C90 cites the Aerospace Industties Association ofAmerica's National Aerospace Standard {NAS) 3610, Cargo Unit Load Devices­ Specificatum For, yet TSO-C90 (and NAS3610) lack perfonnance standards for the tempernture control

systems in active ULDs, or for that system's interaction with critical aircraft systems. TSO-C90cand NAS3610 are not sufficient to fully address all certification requirements ofactive ULDs.

c. ULD design is generally not included in the aircraft's approved tyPe design. ULD use is controlled by aircraft weight and balance manuals. Those manuals typically allow ULDs meeting the requirements ofTSO-C90/.NAS36 IO but don't cover, or restrict, using active ULDs. We have been certifying transport aircraft based on the assumption that ULDs without temperature control systems will be canied in the cargo compartment as inert containers.

7. Distribution. Disnibute this order to tl1.e division level in the Aircraft Certification Service and Flight Standards Service in Washington headquarteis; to the branch level in the Aircraft Certification directorates and regional Flight Standards Service; to all aircraft certification and flight standards district offices.

8. Suggestions for Improvement. Ifyou find any deficiencies, need clarification, or want to suggest improvements to this directive, send a copy offAA Form 1320-19, Directive Feedback lnfo1mation (wiitten or electronically) to the Aircraft Certification Service, Planning and Financial Resow-ces Management Branch, AIR-530, Attention: Directives Management Officer. You may also send a copy to the Aircraft Engineering Division, AIR-I 00, Attention: Comments to Order 8150.4. If you urgeotly need an interpretation, contact the Technical Programs and Continued Airwo11hiness Branch,

AIR-120, at (202 267-9557. Always use FAA.fonn 1320-19 to follow up each verbal conversation.

9. Records Management_ Refer to Orders 0000.t, FAA Standard Subject Classification System; 1350. 14, Records Management; and 1350.15, Records, Organization, Transfer, and Destruction Standards; or your office Records Management Officer or Directives Management Officer for guidance regarding retention or disposition of records.

1) ,s;:, \_, ~ … ,, … David W. Hempe Manager, Aircraft Enginee1ingDivision Aircraft Certification Service

Appendix I. Aspects to Address

ACOs must require applicants to address the following aspects when they seek certification ofactive ULDs. We require ACOs to coordit1ate with the Transport Airplane Directorate standards staffon developing and approving specific methods ofcompliance (MOC) fur lithium batteries and substantiating the effect ofthe active ULD on aircraft fire detection/suppression systems. We encourage ACOs to coordinate with the Transport Airplane Directorate standards staff on developing and approving specific MOC to the other requirements in this appendix.

Appendix I. Aspects to Address

• FHA and FMEA submitted by applicant per latest revision ofAC 25. l 309-J.

• Electromagnetic interference (EMI) (see latest revision ofRTCA, Inc. document RTCA/DO-160, Environmental Conditions and Test Procedures.for Airborne EquipmenJ,. Section 21 Cat H is

required - no aircraft testing necessary.

• How the applicant will address Hazmat (For example, lithium batteries, refrigerant, etc.).

• Aircraft fire detection/suppression system: Evaluate the effect ofairflow changes produced by the active ULO on the aircraft tire detection/suppression system performance and system integrity ­ including multiple ULDs, in multiple configurations, on multiple aircraft. Both nounal dispatch and master minimum equipment list (MtvIBL) dispatch conditions must be addressed. ACOs must coordinate specific requirements and methods ofcompliance with the Transport Airplane Directorate.

• Affect on smoke containment (penetration) characteristics: Evaluate the effect ofairflow changes produced by the active ULD on smoke containmentcharacteristics ofthe cargo compartment­

including multiple ULDs, in multiple configurations, on multiple aircraft.

• Behavior ofthe ULD in a cargo compartment fire --for example: o Explosion potential. o Potential for significant contribution to the fire. o Potential for release oftoxic or fl.a01Jllable gasses.

• Battery safety: o Evaluate the safety ofall battery types under the environmental and load

conditio11S that the ULD will be exposed. Address dead short testing, corrosive chemical containment, flammability, vibration testing, thermal runaway, taxi­

flight-landing loads, grounding and bonding, and any other conditions identified in theFMEA.

o For lead acid or Nickel Cadmium batteries see latest revision ofRTCNDO-293

Minimum Operational Performance Sta11dards for Nickel-Cadmium and Lead Acid Batteries.

Ap1>endix 1. Aspects to Address

o ACOs must coordinate specific requirements and methods ofcompliance with the

Transport Ai!Jllane Directorate for battery types not covered by RTCA /DO­ 293.

o Lithium batteries require additional substantiation, including, but not limited to,

Hazinat and United Nations testing requirements. ACOs nmstcoordinate specific requirements and methods ofcompliance with the Transport Airplane Directorate.

o Address the requirements for batteties in 14 CFR § 25.1353

• Decompression testing (6,000 to 45,000 ft in l second). See International Air Transport Association (IATA) ULD Technical Manual I9u,edition, May 2004).

• Software ( dependent on hazard)--see latest revision of RTCA/DO-178, Software Considerations in Airborne Systems andEquipment CertificaJu;m.

• Environmental conditions, including, but not limited to, vibration, temperature, humidity, altitude, shock, salt spray, and fluids susceptibility. See latest revision ofRTCA/DO-160.

• Other issues identified in applicant's FMEA analysis. NOTE: ULD tracking systems that include a transmission device must be coordinated with the Transport Au-plane Directorate standards staff.

• Operating instructions for both the ULD and 1he temperature control system.

• Instrnctions for continued ai1wo1thiness (!CA) (includes ICA for temperature control system).

• Marking requirements

o Placard for TSO and 14 CFR § 2!.305(d) approval (see appendix 2), or mark as

required under TC/STC process ifapplicable.

o Safety iufonnation required for proper use, operation and limitations.

• ULDs approved under 14 CFR §21.305( d) in conjiu1ction with TSO-C90c approval must have a quality system that meets 14 CFR § 21.143 for both TSO and Non-TSO aspects:

o For TSOA: MIDO must review and approve the production and quality control

system.

o For LODA: Applicable bilateral agreement must provide for oversight ofapplicant's

desigo control and production/quality control ofthe non-TSO functions.

Appendix 2. Additional Marking on Containers

Appendix 2. Additional Marking on Containers

ACOs ensure that manufacturers adhere to the following marking requirements:

a. Attach a label next to the TSO label, or as a completely separate section ofthe TSO label, with the following additional info,mation:

(1) Name of manufacturer

(2) "FAA Approved 14 CFR§21 .305(d)" or, " FAA Approved TC/STC "insert TC/STC munber"'

(3) FM-approved data (such as tlie master drawing list) used to substantiate the additional equipment

(4) Instructions for continued airworthiness (!CA) required: IistFAA-approved ICA document(s)

(5) Any additional limitations or infonnation needed by user to safely transport ULD

b. Affix the markingsh011/!I in appendix 3, on the upper part ofeach vertical face (four locations) of the ULD:

o Marking is approximately 5 inches wide and 7 inches long

o Upper arrow in the figure is colored red and the lower an-ow is blue

o Text must be black and approximately 0.5 inches high

A2-l

8150.4 08(29/07

Appendix 3. Required Marking Label

Appendix 3. Required Marking Label

ACTIVE TEMPERATURE CONTROL SYSTEM

A3-l

0

Appendix 4. Sample Directive Feedback Information, FAA Form 1320-19

U.S. Department of Transportation

Federal Aviation Administration

Directive Feedback Information

Please submit any written comments or recommendations for improving this directive, or suggest new items or subjects to be added to it. Also, if you find an error, please tell us about it.

Appendix 4. Sample Directive Feedback Information, FAA Form 1320-19

Subject: Order

To: Directive Management Officer, AIR-530

(Please check all appropriate line items)

D An error (procedural or typographical) has been noted in paragraph ___ on page ___

D Recommend paragraph ___ on page ___ be changed as follows:

(attach separate sheet ifnecessary)

D In a future change to this directive, please include coverage on the following subject

(briefly describe what you want added):

D Other comments:

D I would like to discuss the above. Please contact me.

Submitted by: … Date: …

FTS Telephone Number: … Routing Symbol: …

FAA Fonn 1320-19 (8-89XRepresentation)

A4-I