Radar Vectors
FAA Order Cancelled Issued Sep 16, 2011 AIR-520 22 pages Copy saved Nov 18, 2026

Order 8000.93B Aircraft Certification Service - National Technical Training Plan

This document is cancelled. Cancelled by 8000.93C. Check the official source before relying on it.

Official source ↗ Open PDF

u.s. DEPARTMENT OF TRANSPORTATION

u.s. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Aircraft Certification Policy

ORDER 8000.93B

Effective Date:

09/16/2011

SUBJ: Aircraft Certification Service - National Technical Training Plan

This order describes the Aircraft Celiification Service's (AIR) technical h-aining planning and program requirements_ Policy guidance is provided on minimum teclmical training requirements; the process for identification of organizational and individual training needs; requests for temporary and pelmanent waivers; comse attendance guidelines; and when continued service agreements are required_

ORDER 8000.93B

'~.A"~ f?~' 1 ~t~l .- ?,l-Dorenda D. Baker d

Director, Aircraft Certification Service, AIR-1

Distribution: Electronic Initiated By: AIR-520

09/16/2011 8000.93B

Table of Contents

Paragraph Page

Chapter 1. General Information

1-1. Purpose of This Order … 1

1-2. Audience … 1

1-3. Where Can I Find This Order? … 1

1-4. Cancellation … 1

1-4. Cancellation … 1

1-5. Explanation of Changes … 1

1-6. Background … 2

Chapter 2. Training Requirements Identification Process

2-1. Assessment of Need … 3

2-2. Identification ofthe Organization's Training Needs … 3

2-3. Teclmical Training Requirements … 4

2-4. Identification of Emp\oyee Training Needs … 5

2-5. Determination of Training Priority … 6

2-5. Determination of Training Priority … 6

2-6. Documentation of AIIDual Call for Training Requirements … 6

2-7. Submission of Training Requirements to AlR-520 … 7

Chapter 3. Course Prerequisites, Waivers, Attendance and Continued Service Agreement

3-1. Prerequisites … 8

3-2. Waivers … 8

3-3. Course Attendance … 9

3-3. Course Attendance … 9

3-4. Completion Credit … 9

3-5. Continued Service Agreements … 10

Chapter 4. Administrative Information

4-1. Authority to Change This Order … 11

4-2. Records Management … 11

4-3. Suggestions for Improvement … 11

Table of Contents (continued)

Appendix A. Roles and Responsibilities … A-I

Appendix B. Defmitions … B-1

Appendix B. Defmitions … B-1

Appendix C. Related Publications … C-1

Appendix D. Request for Waiver Fonn … D-l

Appendix E. Training Non-Attendance Justification Fonn … ' " .. E-1

Appendix F. FAA Fonn 1320-19, Directive Feedback Infonnation … F-1

II

Chapter 1. General Information

1-1. Purpose of This Order. This order provides guidance to AIR managers and employees on the administration of the tec1mical training program and ensures compliance with Service level training requirements. It describes the process for the identification of organizational and individual employee teclmical training needs in preparation for the Annual Call for Training. The order is used in combination with the AIR Technical Training Requirements Swnmary Table maintained on the MyF AA website at https://employeesJaa.gov under AIR Training. Supplemental training guidance for flight test pilots (FTP) and flight test engineers (FTE) is identified in Order 8110.41, Aircraft Certification Service FAA Plight Test Responsibilities, Procedures, and Training as well as in the AIR Flight Test Operations Manual.

Chapter 1. General Information

1-2. Audience. All AIR managers and employees must comply with the requirements oftms order.

1-3. Where Can I Find This Order? You can fmd this order on the Federal Aviation Administration (FAA) Orders and Notices website at http://www.faa.govlregulations policies/orders notices/ or the FAA's Regulatory and Guidance Librruy (RGL) website at htt:p:l/rgl.faa.gov.

1.4. Cancellation. Order 8000.93A, Aircraft Certification Service National Training Plan, dated December 21,2009, is cancelled.

1-5. Explanation of Changes.

a. Formats the order in accordance with guidelines in FAA Order 1320.lE, FAA Directives Management.

h. Aligns terminology used for staffmg categories with the FAA Workforce Plan.

c. Adds requirement to consider the need for a continued service agreement for technical training with considerable cost to the service.

d. Adds defmition and responsibilities for directorates/divisions training points of contact (POC) that assist the AIR Training Manager (A TM) with the management of the training functions.

e. Removes reference to grandfather clause as a permanent waiver option. The term is obsolete as the time period it covered has expired.

f. Clarifies the identification ru1d docwnentation of training needs.

g. Clarifies the waiver process.

h. Clarifies the use of the Training Non-Attendance fOlm.

1-6. Background.

a. The increasing requirements for certification of aircraft utilizing new tec1mology concepts in design and construction make it essential that the knowledge and skills of the AIR workforce are developed and maintained to a high level of proficiency. This requires training attendance in state-ofthe-art technical, job functions, project management, and other general training courses.

b. This order consolidates AIR technical training requirements, roles, and responsibilities into one order and is used by supervisors and employees to identify individual training needs and establish training priorities.

Chapter 2. Training Requirements Identification Process

Chapter 2. Training Requirements Identification Process

2-1. Assessment of Need. Each FAA-funded learning and development activity is based on an objective assessment of need. This requires a clear justification that the ftmded activity is intended to improve or enhance organizational and/or individual performance. As a part of the training identification process, each directorate/division/office analyzes its own operational needs and policy drivers to determine Full Service Office (FSO) requirements. The FSO requirements are defined as the collective knowledge and skills needed for the employees of a service unit to effectively provide all the products and services demanded by the tmique customer base of the service unit. Policy drivers are the principal statutory and regulatory requirements that identify training needs. Each office also considers other mandates in assessing its office needs, such as directives or standard operating practices, congressional mandates, comptroller decisions, and union agreements. At a basic level, this means that an operational perspective talces precedence over an individual employee's desire for training.

a. Supervisors must identify organizational training requirements and consult v.~th employees to identify individual employee training needs. Supervisors with input from their employees identify training needs based on cWTent/anticipated duties and responsibilities. Part of the process is to jointly review training records to ensure that all mandatory training requirements are requested, scheduled, or completed. Supervisors shall ensure that the identification of individual employee training needs is perfOlmed and documented:

(1) Within 30 days of entry on duty in AIR for a new employee,

(2) Withln 30 days of the beginning of the performance cycle,

(3) As part of the perfOlmance evaluation reviews, andlor

(4) As part of the annual call for training process.

b. Employees work with their supervisors to identify training needs based on current/anticipated duties and responsibilities, and jointly review training records to ensure all mandatory training requirements are requested, scheduled, or completed. (l\Jote: Employees must receive approval from their supervisors in advance for any training talcen during duty hours or requiring the use of government resources.)

2-2. Identification of the Organization's Training Needs. Annually, a specific plan is developed to accommodate training needs for the next fiscal year (FY). A process initiated by AlR-520, called the "Annual Call for Training" is a tool used to identify those training needs and facilitate the

scheduling/procurement of training events. For technical and non-technical subjects, supervisors assess whether or not their organization has the minimum competency in the identified subject areas to accomplish the work that is planned for the next fiscal year. The A TMIPOC in each directorate/division/office provides the supervisors with resources to use to identify organizational training needs. Supervisors should consider the following when identifying training requirements to

support the organization for the next fiscal year:

a. FSO organizational requirements;

(1) Changes in teclmology,

(2) Proposed new work,

(3) Reductions in work,

(4) Assignment changes,

(5) Employee input,

(6) Retirements/attrition,

(7) Proposed new hires (new employees);

h. AlRJAviation Safety (AVS) trairllng requirements;

c. Flight test guidelines/requirements;

d. New courses;

e. Recurrent training requirements;

f. Training available through other than formal courses (for example, details);

g. Training requested for the current FY that is not currently scheduled. A training requirement should only cany over to the following FY if it is still valid and no current FY scheduled offering is available; and

h. Amount of training that is reasonably supported by the organization during the next FY. It is important to look at the "big picture" to include time out of the office (in terms of each individual employee and the cumulative impact on the office) with reference to operational requirements.

2-3. Technical Training Requirements. Supervisors and employees should use the AIR Technical Training Requirements Swnmaty Table as a guide to determine annual training needs. The table is

located on the MyF AA employee website at https://employeesJaa.gov under AIR Training. The table lists technical training classified in the following categories; initial, mandatory, position essential or continuing development. For the purposes of this order, training categOlies are determined using the following clitelia:

a. Initial Training. Training that is required of AIR safety critical operational staff employees within the first 24 months of service.

b. Mandatory Training. Training that is required by an AIR order or policy, and/or updates to orders or policy (as mandated by memorat1dum from a directorate/division manager or policy owner). This includes training that is required on a recurring basis and may take the fOlm of informational briefings designed to bridge the gap between old and new policy. No exceptions or waivers are pennitted for mandatory training unless speciiied in the applicable order or policy.

Note: Other organizations (Department of Transportation (DOT), FAA, or A VS) may mandate training in law or a policy; however, only training mandated by AIR is covered in tlus order.

c. Position EssentiaJ Training. AIR technical training that is assigned by management and is essential to performing ajob function or tasks carried out by an employee.

(l) AIR safety critical program staff and operational support staff employees may attend initial and mandatory technical training when deemed necessary for their job functions or tasks.

(2) Even though a course is not a Service requirement, individual directorate/division/office managers may designate it as position essential for their directorate/division/office personnel.

d. Continuing Development Training. Training that is not considered necessary to perfonn a basic job function, but is beneficial to enhance workforce performance or to prepare for future job assignments.

2-4. Identification of Employee Training Needs. Supervisors in conjunction with the information contained in the AIR Technical Training Requirements Summary Table, and consideling the FSO requirements, use the following steps to determine the priority of training required:

a. Review career level definition and job competency requirements;

b. Review documented assessment of employee traliling needs (as outlined in paragraphs 2-1. a. and b.);

c. Review employee's electronic Learning Management System (eLMS) learning plan and learning history;

d. Determine if the employee has completed mandatory training as described in the AIR Teclmical Training Requirements Sun1lTIary Table;

e. Determine if trallung is required by AIR, such as in a regulation, order or policy memorandum. Refer to the AIR Technical Trallling Requirements SturunalY Table for a list of mandatory courses al1d target audience information;

f. Deterrrune if the employee possesses the knowledge and skills required to perform necessary job tasks. The supervisor must determine whether traiIling is position essential or for continuing

development;

g. Determine if this training is needed to update or enhance required skills. If yes, the training is considered continuing development; and

h. Detennine if the employee will pelfonn activities that require this skill within the next year. If not, this training is identified through the employee's leaming plan as a means of assisting the employee in achieving their career goals.

2-5. Determination of Training Priorities. Priorities are determined by the supervisor and provide an objective means to determine the criticality of the training requirements. The training priorities are documented in the annual call for training process as required in section 2-6. of this order. A training priority is required for each training need identified. Table 2-1 contains further guidance and definition of the priorities used by AIR.

Priority 1

Priority 2

Priority 3

Priority 4

Priority 5

Table 2-1. Training Priorities The minimum training required by AIR safety critical operational staff to achieve the Service's mission in the FSOs. The focus of Priority 1 training is to provide knowledge/skill to assist the Service and its aviation safety staff to do the follo\h,~ng:

a. perfonn continued operational safety functions; b. work with aviation authorities, manufacturers, and other stakeholders to

successfully improve the safety of the international transportation system; c. administer safety standards governing the design, production, and airworthiness of civil aeronautical products; and d. oversee design, production, and auworthiness certification programs to

ensure compliance with the presclibed safety standards. The minimwn training required by safety critical program staff and operational support staff (those managers and employees not classified as safety critical operational staff) to achieve the Service's mission. It includes executive, management, supervisory, position essential and general training. This training, like Priority 1, is delivered for the organization to accomplish its mission. Additional training required to operate the organization effectively and efficiently. This priority covers training for all employees. Priority 3 training allows the organization to become more operationally efficient, rather than achieving only minimlUn training requirements identified in Priorities 1 and 2. ll1e aggregate of Priorities 1,2, and 3 represents the optimum training requirements of the organization. Training requested by employees or managers that is job-related, but the focus is on the employee's needs and goals, not those of the organization. Training that u1cludes all other training requested. It is not job-related. An example

is an inspector requesting to talce a budget course that could help in the transition to a new career field.

2-6. Documentation of Annual Can for Training Requirements. Once the organizational and individual employee assessment of training needs is completed, the managers within each directorate/division/office document the directorate/division/office requirements in preparation for the Service-wide Annual Call for Training. The A TMiPOC in each directorate/division/office assists supervisors with docmnentation for completing the Annual Call for Training based on AIR-520 call solicitation guidance. At a minimum, the documentation will include employee names or position titles (such as in the case ofprojected new hires), training items including any out-of-agency training, priority of training items requested for each employee/position, and training category (e.g. initial,

mandatory, position essential, continuing development). Refer to the AIR Technical Training Requirements Smnmary Table for a list of AIR-sponsored training. This list is located on the MyF AA website at https:l/employees.faa.gov under AIR Training. Completed data is submitted to the A TM for the office.

2-7. Submission of Training Requirements to AIR-S20. A TMs review and consolidate their directorate/division/office approved training requirements in accordance vlith the annual call for training guidance. Approved training requirements are submitted to AlR-520 by the established suspense date.

Chapter 3. Course Prerequisites, Waivers, Attendance and Continued Service

Chapter 3. Course Prerequisites, Waivers, Attendance and Continued Service

Agreement

3-1. Prerequisites. Completions of all FAA course prerequisites or approved course waivers (temporary or pennanent) are required prior to attending training.

3-2. Waivers. (Refer to Appendix D: Request for Waiver Form). With sufficient justification, action may be taken to waive attendance at a course, temporarily or permanently, as appropriate.

a. Waiver Request. Requests for waivers are submitted by the supervisor using the Request for Waiver Form, FAA Form 8000-48. The fonn is posted on the MyF AA employee website at https://employeesJaa.gov/ under AIR Training.

b. Permanent Waiver. A request for a pennanent waiver for attendance at a learning event/course is appropriate when documented work experience, education, and/or other outside training is deemed equivalent by the manager. Approval of a permanent waiver is not granted under any circumstances for initial training courses, such as Part 21, if the course is a Priority 1 for that employee. Permanent waivers also are not granted for mandatory training courses unless specifically provided for in the document that defmes the training requirement. All permanent waiver requests are approved (signed) by both the immediate supervisor and the directorate/division/AIRAO manager using the FAA Fornl 8000A8, Request for Waiver Form.

c. Temporary Waiver. A request for a temporary waiver for attendance at a learning event/course is appropriate when the employee will attend at a later date. All temporary waiver requests are approved (signed) by the employee's immediate supervisor using FAA Form 8000-48, Request for Waiver Form. Temporary waivers are appropriate in the following circumstances:

(1) To alter the training sequence. For example, a waiver may be granted to request permission to attend Aviation Safety Inspector Job Functions course before the Part 21 course. This waiver does not exempt the employee from taJcing Part 21, but if granted, allows the employee to take Aviation Safety Inspector Job Flllctions course prior to Part 21.

(2) To address alternatives to training attendance sequence as directed by an order or policy. For example, the designee management policy stipulates that under celtain conditions an employee who oversees designees may pelform designee management functions with an assigned mentor until the employee has completed designee management training.

(3) For critical illness as documented.

(4) For military duty.

d. The supervisor will submit the signed Request for Waiver Form, FAA Fonn 8000-48 to the responsible ATM. All waiver requests are due to the A TM no less than six weeks prior to the start of a class and must include a justification statement. If the employee is identified as a candidate for the course less than 6-weeks prior to the start date of the course, the manager will submit the form within

1:\·1,10 business days of identifying the employee for the course.

e. The A TMs will assist supervisors with coordinating approval for waivers as requested. The A TM may request that the COLITse manager, if appropriate, work directly with the immediate supervisor to resolve any questions or concerns regarding waiver requests. In the case of a field office that is not located in the same facility as the directorate/division manager, inunediate supervisors may request the assistance of the ATM to obtain the final signature.

f. 111e A TM will retain the original copy of the waiver per records management guidance. All permanent waivers are recorded in eLMS as equivalencies. In addition, the ATM will send a copy of a temporary waiver to the AMA-220 course manager who will maintain a copy of the temporary waiver request(s) according to the records retention schedule.

3-3. Course Attendance.

a. All employees are expected to attend training as scheduled, abiding by both co lise dates and class times. Employees are expected to be on time and stay through the completion of the COlise. They must not make travel or other anangements (for exanlple, to return home) that will result in an intenuption of the scheduled training. If the employee does so, he/she may not receive credit for attending the course and may have to re-take all or part of the course at a later date. The employee is expected to coordinate missed class time with luslher supervisor, ATM, and Calise manager, or appropriate vendor representative to avoid possible loss of credit.

b. In cases involving illiless, injury, emergencies, or other situations that are beyond the employee's control, the course manager and the employee's irrunediate supervisor will assess the situation and deternline completion requirements. Each situation is evaluated individually, considellng factors sucb as the total course time nllssed and the ability of the employee to make up course work l1llssed.

c. When an employee is enrolled in a scheduled offering of a training COlise, but does not attend, the circumstances surrounding the non-attendance/cancellation are to be documented on the Training Non-Attendance Justification Form, FAA Form 8000-47. The form is posted on the MyFAA employee website at https://employees.faa.gov/under AIR Traiillng. The in1mediate supervisor completes and signs the form as soon as it is known that the employee will not attend training. The original is provided to the A TM and a copy is maintained by the supervisor. (Refer to

Appendix E for a sample ofthe training non-attendance justification form.) This form is to be used in the following cases:

(1) Employee does not attend as scheduled.

(2) Employee withdraws from the course without being immediately rescheduled to another scheduled offering.

(3) Employee vvithdraws witrun 30 calendar days of the class start and the slot goes unused, regardless of whether or not the employee is immediately rescheduled.

3-4. Completion Credit. All employees' traiillng is recorded in the eLMS system. Credit for course attendance is awarded to employees who successfully complete the prototype or regular

scheduled offering, and includes completing all COlU'se exercises and activities. Employees participating in a COlU'se walk-through do not receive credit.

3-5. Continued Service Agreements. At the discretion of the AIR Director or directorate/division/office manager in consultation with the A TM, individuals attending training course(s) with significant cost to the organization may be required to sign a continued service agreement. Employees are notified of the requirement prior to attending the training event. (Reference Human Resource Policy Manual, Volume 5: Learning and Development- Administration (LDS.S.7).

Chapter 4. Administrative Information

Chapter 4. Administrative Information

4-1. Authority to Change This Order. This training order is reviewed annually by the Training Branch (AIR-520) in coordination with AIR management teams and Am.. ATMs. Revisions to this order are made based on organizational needs and management approval. The Planning and Program Management Division, Training Branch, AIR-520, is responsible for the maintenance of this order.

4-2. Records Management. Refer to Orders 0000.1 , FAA Standard Subject Classification System; 1350.14, Records Management; and 1350.15, Records Organization, Transfer, and Destruction Standards; or your office Records Management Officer (RMO)lDirectives Management Officer (DMO) for guidance regarding retention or disposition of records.

4-3. Suggestions for Improvement. If you fmd deficiencies, need clarification or want to suggest improvements to this order, send FAA Form 1320-19, Directive Feedback Information, (written or electronically) to the Aircraft Celtification Service, Administrative Services Branch, AIR-51 0, Attention: Directives Management Officer. If you urgently need an interpretation, you can contact the Planning and Program Management Division (Aill.-500) at 202-267-9372. Always use Form 1320-

19, in appendix F, to follow up each verbal conversation.

09/16/2011

Appendix A. Roles and Responsibilities

Appendix A. Roles and Responsibilities

8000.93B Appendix A

a. Training Branch. AIR-520 oversees and directs AlR's technical training program, plans, policies and procedures; and designs, develops, and delivers technical COillses, in coordination with the FAA Academy, Aircraft Certification Branch, AMA-220. For tec1uucal training, AIR-520 ensures appropriate delivery methods for the AIR tecruucal workforce, manages the AlR training budget, provides ongoing support to the A TMs on all technical training issues, leads the A TMs in managing AIR's Annual Call for Training and coordinates AIR's training requirements with other orgaJuzations.

AIR-520, in conjW1ction with AIR management teams and the ATMs, is responsible for reviewing and updating this order and the AIR Technical Training Requirements SummaJY Table annually or as needed.

b. Supervisors are responsible for ensuring that their employees meet the training requirements of their specific positions. In the annual call for training process, supervisors identify and prioritize organizational and individual employee training needs in accordance with A VS and AIR guidance. In accordance with Chapter 2 of this order, supervisors will review each employee's specific training profile at least annually to determine if any initial, mandatory, position essential, or continuing development training is required. Supervisors docw11ent their rationale for waivers in accordance with the waiver process guidance located in Chapter 3 of this order.

c. Employees are to work with their supervisors in identifying their training needs in consideration of current job requirements and career development goals. At least annually, employees should evaluate position requirements to determine if additional knowledge or skills are required to improve specific job performance or functions. Tills may include identification of selfdevelopment activities that broaden knowledge and sk.ills. Training needs should be brought to the attention oftlle supervisor by the employee as soon as possible. Employees are responsible for verifying the accmacy of training completion infOlmation in eLMS. For any missing training history information, employees must provide proof of training completions to their A TMs.

d. Course Manager, for the purposes of tlus order, works with the responsible supervisor and ATM to review aJld approve training waivers when appropriate. For resident course attendance issues, the course manager coordinates with the employee's supervisor and ATM to determine appropriate action.

e. AIR Training Managers (A TM) are representatives within each directorate or division who serve as focal points regarding the AIR training program. A TMs provide training information and resources to directorate/division/office employees; advise managers and employees on training policies and guidance; aJld manage the Atmual Call for Training Process and enrollments within their respective directorates/divisions. The AIR-500 ATM also serves as the focal point for AIR-I and AIRAO offices. The A TMs ensure that permanent waivers are recorded in eLMS in accordance with the waiver process guidance located in Chapter 3 of this order.

f. AIR training Point of Contact (POC) supPOlis tlle A TM witilln their directorate/division/office with the management of training prograJu activities and fimctions.

A-I

09/16/2011

Appendix B. Definitions

Appendix B. Definitions

8000.938 Appendix B

a. AIR Technical Training Requirements Summary Table. A listing of mandatory, position essential, and continwng development training available on the MyF AA employee website at

https://employeesJaa.gov/ under AIR Training.

b. Annual Call for Training. Process to determine training needs for the upcoming fiscal year.

c. Continuing Development Training. Training that is not considered necessary to perfonn a basic job function, but is beneficial to enhance workforce performance or to prepare for future job assignments.

d. Continued Service Agreement (CSA). A written agreement completed in advance of attendance at a training event that requires a specified employment commitment by the attendee.

e. Electronic Learning Management System (eLMS). The system of record for all employees' training activities.

f. Equivalency. An approved substitution for an AIR training requirement. Equivalencies are determined on a course-by-course basis as referenced in eLMS and the AIR Teclmical Training Requirements Sununary Table.

g. Full Service Office (FSO). The collective knowledge and skills needed for the employees of a service unit to effectively provide all the products and services demanded by the unique customer base of the service unit.

h. Initial Training. Training that is required of AIR safety critical operations staff within the first 24 months of service. Safety critical program staff and operational support staff may attend initial training when deemed necessary for their job functions. Also, refer to the AIR Technical Training Requirements Sununary Table.

i. Mandatory Training. For the purpose of this order, is training required by an AIR order or policy, and/or updates to orders or policy (as mandated by memorandum from a directorate/division

manager or policy owner). This includes training that is required on a recuning basis and may tal<e the fmm of informational bliefmgs designed to bridge the gap between old and new policy. Also, refer to the AlR Technical Training Requirements Summary Table.

j. Operational Support Staff. This category includes all AIR staff not c1assifted as safety critical operational staff or safety critical program staff. This includes all A VS personnel, including managers, in functions such as planning, finance, and administration.

k. Position Essential. AIR technical training that is assigned by management and is essential to perforrning a job function canied out by an employee. Note: Even though a course is not a Service requirement, individual directorate/division/office managers may designate it as position essential for

09/16/2011 8000.93B Appendix B

their directorate/division/office personnel. Also, refer to the AIR Technical Training Requirements Swrunary Table.

I. Prerequisites. Training, briefings, readings, and/or other infonnal workshops required in advance of attending another learning event.

m. Recurrent Training. Training required on an ongoing basis in order to maintain proficiency. Recurrent training intervals are detennined by an order, regulation, or by the Director of the Aircraft Certification Service. Supervisors may also require reClUTent training on a more frequent basis as performance ClrClUllstances warrant.

n. Safety Critical Operational Staff. For the purpose of this order, this includes, but is not limited to, aviation safety inspectors (AS!), aerospace engineers (ASE), flight test pilots (FTP), flight test engineers (FTE), transportation industty analysis officers, and social sciences human factors employees. This categOlY includes positions where the duties have a direct operational impact on the A VS safety mission for which the Service has responsibility. This staffing categOlY includes, but is not limited to, all AIR staff whose jobs are to:

(1) Certify aircraft, aircraft alterations, equipment, and avionics;

(2) Monitor and enforce industry compliance with safety regulations, through inspections, data analysis, risk management, or other means; and

(3) Investigate accidents.

o. Safety Critical Program Staff. This category includes all staff, not included above, who directly support the safety critical operational staff, and without whose assistance the safety critical operational staff could not efficiently and effectively do their jobs. This includes, but is not limited to, AIR personnel who:

(l) Evaluate and analyze the effectiveness of existing celiification, regulatory and compliance programs, activities, and methods;

(2) Develop new programs, activities, and methods for improved oversight activities and enhanced industry safety, including new programs and revised approaches directed by Congress or recommended by oversight organizations (e.g., Government Accountability Office (GAO), Office ofthe Inspector General (OIG), and the National Transportation Safety Board (NTSB));

(3) Design, develop, and deliver the teclmical training cuniculum for the safety critical operational staff;

(4) Oversee and monitor the designee or delegation programs; and

(5) Provide information technology suppOli.

09/16/2011 8000.938 Appendix B

p. Training Category. An AIR training designation. Training categories include initial, mandatory, position essential, and continuing development.

q. Waiver. A request to substitute work experience, education, andlor other outside training in lieu of position essential training; alter the training delivery sequence; or substitute alternatives to training attendance until training is completed.

09/16/2011

Appendix C. Related Publications

Appendix C. Related Publications

8000.938 Appendix C

a. FAA Order 8100.5, AIR Mission, Structure, Responsibilities and Relationships. The order is available on the MyF AA employee website at https://employees.faa.gov/ under Orders and Notices.

b. AIR Technical Training Requirements Summary Table. The table is maintained on the MyF AA employee website at https:llemployees.faa.gov/ W1der Aircraft Certification Selvice- Aircraft Celtification Training.

c. AVS Competency Awareness and Tr'aining QMS Procedure, AVS-001-012. The procedme is maintained on the MyFAA employee website at https:llemployees.faa.gov/tmder Aviation Safety Quality Management System.

d. FAA Order 8110.41, Flight Test Pilot Training, Responsibilities, and Procedures. The order is available on the MyF AA employee website at https://employees.faa.gov/lmder Orders and Notices.

e. Mandatory Training for aU AVS Employees. The list is maintained on the MyF AA employee website at https:llemployeesJaagov/undertheAviation Safety CAYS) organization.

f. Aircraft Certification Service (AIR) Flight Test Operations Manual. This manual is maintained by the AIR Flight Test Program manager, with copies distributed to all AIR flight test crewmembers.

C-l

09/16/2011

Appendix D. Request for Waiver Form

(Sample)

Waiver Request Aircraft Certification Service

Appendix D. Request for Waiver Form

Technical Training Program

8000.938 Appendix B

Name of Employee: Joe Engineer I Office Location: City, State I Routing Symbol: ANE-MIDO

Item Number: FAA21016 litem Waived: Part 21

To Attend: FAA21020, ASI Job Functions I Scheduled Offering: 36568 I Class Start Date: Aug 23,2011

1. Indicate the type of waiver: A. Temporary (A temporary waiver of prerequisite requirement requires Immediate supervisor approval).

!Z]To aller the sequence in which training is takert, a waiver may be granted. For example, a waiver may be granted

to request permission to attend Aviation Safety Inspector Job Functions training before Part 21 training. This waiver does not exempt the employee from taking Part 21, but if granted, allows the employee to take Aviatiort Safety Inspector Job Functions prior to Part 21.

DTo address allernatives to training at1endance until training can be completed, a waiver of training may be

considered as specified by AIR policy. For example, the Designee Management Policy stipulates that under certain conditions an employee who oversees designees may perform designee management functions with an assigned mentor unlil the employee has completed Designee Management training o Extended sick leave or military leave

B. Permanent (A permanent waiver requires both immediate supervisor and directorate/dlvision/AIR-40 manager)

DTo substitute work experience, education, and/or other outside training in accordance with the AIR Technical

Training ReqUirements Summary table and the Aircraft Certification Service National Technical Training Plan

Order. 2. Management must document rationale.

Justification for waiver (I.e. other training experience, FAMndustry experience, why satisfactory completion of training Is predicted, planned or unplanned, start date and expected end date of the leave):

t-Thile in industry, Joe served as the focal point for the XYZ Helicopter Corporation

Production Certificate and for coordinating with MlDO-123. He has an in-depth knowledge of Part 21 based on his experience at XYZ Helicopter and I am comfortable

that he will b e able to successfully complete the ASI Job Functions class prior to taking Pa rt 21.

3. Approval. John Doe, Manager, ANE-MIDO 5/23/2011

Immediate Supervisor-Name and Title Date /s/ 123-456-7890

Signature Telephone

For permanent waiver of Item attendance, the dlrectorate/dlvlsion/AIR-40 manager's approvat is also required o Concur o Non-concur

Directorate/Division/AIR-40 Manager-Name and Title Date

Signature Telephone

Original: Directorate/Division A TM, Copy to AMA -220 if requ ired

FAA Form 8000·48 (08/2011)

09/16/2011 8000.938 Appendix E

Appendix E. Training Non-Attendance Justification Form

Appendix E. Training Non-Attendance Justification Form

(Sample)

Training Non-Attendance Aircraft Certification Service Justification Technical Training Program

NamE! of Employee: Joe Engineer Office Location; Washington, DC I Routing Symbol; AIR-S20

Item Number: FAA21 016 Item Name: Part 21

Scheduled Offering: 52089 I Class Start Data: Jul 26, 2011

Conducted By: !2J Academy o CMEL o Other

1. Reason for Training Cancellation.

Based on the employee consultation with health care provider, physical training sessions should not be missed. The courSe conflicts With physical training ses>lons.

2. Approval.

Jane Doe , Manager, AIR-520 7/2 2 /2011

Immediate Supervisor-Name and Title Date lsi 20 2 -555 - 1234

Signature Telephone

Sally Smith, Manager, AIR-500 7/ 22/2011

Dlrectorate/Division/AIR-40 Manager-Name and Title Date ls i 202-555-5678

Signature Telephone

Orlglna/: Directorate/Division ATM, Copy to Manager

FAA Form 8000-47 (08/2011)

09/16/2011 8000.938 Appendix F

Appendix F. FAA Form 1320-19, Directive Feedback Information

Appendix F. FAA Form 1320-19, Directive Feedback Information

US Department of Transportation

Federal Aviation Administration

Directive Feedback Information

Please submit any written conunents or reconunendations for improving this directive, or suggest new

items or subjects to be added to it. Also, if you find an enor, please tell us about it.

Subject: FAA Order 8000.93B

To: Administrative Services Branch, AIR-51O

(Please check all appropriate line items)

D An error (procedural or typographical) has been noted in paragraph ____ on

page …

D Recommend paragraph … on page … be changed as follows:

(attach separate sheet ifnecessary)

D In a future change to this directive, please include coverage on the following subject

(briefly describe what you want added):

D Other corrunents:

D I would like to discuss the above. Please contact me.

Submitted by: Date: ---------------------------------- ----------------------

FTS Telephone Nwnber: … Routing Symbol: …

FAA Form 1320-19 (10-98)

F-l