Radar Vectors
FAA Order Cancelled Issued May 3, 2019 AJV-P 17 pages Copy saved Nov 18, 2026

Order JO 7110.66F National Beacon Code Allocation Plan (NBCAP)

This document is cancelled. Cancelled by JO 7110.66G. Check the official source before relying on it.

Official source ↗ Open PDF

U.S. DEPARTMENT OF TRANSPORTATION

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION ORDER

JO 7110.66E

Effective Date:

June 3, 2019

SUBJ: National Beacon Code Allocation Plan (NBCAP)

1. Purpose of This Change. This order describes procedures and functional responsibilities for the use of Mode 3/A of the Air Traffic Control Radar Beacon System (ATCRBS). It applies to all Air Traffic Control (ATC) facilities that provide services in the United States (U.S.) domestic, oceanic and arctic airspace.

2. Audience. This directive applies to the following Air Traffic Organization (ATO) service units: Air Traffic Services (AJT), Mission Support (AJV), System Operations Services (AJR), including the David J. Hurley Air Traffic Control System Command Center (ATCSCC), the Directors of Tactical Operations, System Operations Security, Flight Services Program Operations, the Alaska Flight Services Information Area Group, FAA contract ATC service providers and all ATC facilities; select offices and services within Washington Headquarters, the William J. Hughes Technical Center (WJHTC), Mike Monroney Aeronautical Center (MMAC) and Department of Defense (DOD).

3. Where Can I Find This Order? This order is available on the MYFAA employee website at https://employees.faa.gov/tools_resources/orders_notices/ and on the air traffic publications website at http://www.faa.gov/air_traffic/publications.

4. Cancellation. This cancels FAA Order JO 7110.66E, National Beacon Code Allocation Plan (NBCAP), dated August 11, 2015.

Distribution: Electronic Initiated By: AJV-8 Air Traffic Procedures

ORDER JO 7110.66F

5. Explanation of Policy Change. This change amends Appendix A: National Beacon Code Allocation Summary, TBL A-1, as follows:

1000 Used exclusively by ADS-B Aircraft to inhibit Mode 3A transmit

1207-1233, 1235-1254, 1256-1272 Discrete 1200 series codes allocated to Service Area Operations for assignment to air traffic facilities as needed for Unique Purpose VFR Programs (example: DVFR, tour operator).

6. Concept.

0100-0700, 1100, 1300, 1500, 2000*, 2100, 2200, 2300, 2400, 4000 Non-discrete code assignments in accordance with FAA ORDER JO 7110.65, paragraph 5-2-2 Discreet Environment. 2000*, for use in oceanic airspace, unless another code is assigned by ATC.

0500, 0600, 0700, 1100, 1300, 1400, 1500,1600, 1700, 2000*, 2100,2200, 2300, 2400, 2500,2600, 2700, 3000, 3100,3200, 3300, 3400, 3500,3600, 3700, 4000, 4100,5600, 5700, 6000, 6200,6300, 6500, 6600, 6700,7000, 7100, 7200, 7300,7610-7676, 7710-7776

External ARTCC subsets (Discrete codes of blocks only except for first primary block, which is used as the ARTCC’s non-discrete code if all discrete codes are assigned.) 2000*, for use in oceanic airspace, unless another code is assigned by ATC.

5100-5300 May be used by DOD aircraft beyond radar coverage but inside U.S. controlled airspace with coordination as appropriate with applicable Area Operations Directorate. DOD aircraft outside U.S. controlled airspace need to coordinate with the applicable Flight Information Region‘s (FIR) air traffic authorities. 5100 and 5200 are also allocated by PCT for use in the DC SFRA and FRZ

6. Concept. a. The National Beacon Code Allocation Plan (NBCAP), is based upon the concept of discrete beacon code assignments to each ARTCC. Beacon codes are assigned by the automation system to a flight plan for external and internal flights. Each Air Route Traffic Control Center (ARTCC) should be allocated enough discrete code blocks to allow all aircraft to proceed from departure to destination using the same discrete code. Due to the limited number of available code subsets, traffic volume and the number of ARTCCs duplicate assignments are unavoidable. Vigilant analysis is required to minimize the impact of duplicate beacon code assignments. To reduce beacon code re- assignments ARTCC allocations are managed at the national level.

b. Terminal, NAS Stakeholder, Unique Purpose, or Experimental Activity beacon code assignments are made from the allocations designated in Appendix A, and are managed by the Service Area Directorates. If additional or reassignment of codes not contained in the NBCAP is needed, the Air Traffic Procedures office will assist the Service Area Directorates in determining a solution.

c. Every effort will be made to consider and comply with International Civil Aviation Organization (ICAO) beacon code assignment procedures when appropriate.

7. Responsibilities.

7. Responsibilities. a. Air Traffic Procedures Directorate must:

(1) Make and manage all National Beacon Code Allocations. (2) Make all ARTCC beacon code assignments. (3) Make all Service Area code assignments beyond those delegated in this order. (4) Review Service Area Directorate supplements and audit local beacon code assignments as necessary.

(5) Respond to Service Area Directorate requests to support terminal, industry, unique purpose or experimental activity.

(6) When necessary, coordinate beacon code assignments with international air traffic service providers with assistance from the Service Area Directorates.

(7) Work with Service Area Directorates to coordinate beacon code assignments with non- FAA agencies such as the DOD.

b. Service Areas Directorates must:

(1) Assist Air Traffic Procedures Directorate with the execution of this order. (2) Manage all Service Area Directorate beacon code assignments delegated in this order. (3) Work with local ARTCC’s and the Air Traffic Procedures Directorate to manage internal beacon code assignments in accordance with this document.

(4) Develop a Service Area Directorate supplement to this order, and specify the designated use of beacon code assignments made by the Service Area Directorate. Include in the supplement a current record of all Instrument Flight Rules (IFR) and Visual Flight Rules (VFR) code blocks assigned to each terminal, flight service facility, or unique purpose, along with the specific use or function of each code block. For those Service Area Directorates whose area of responsibility contains or is adjacent to an Air Defense Identification Zone (ADIZ), include codes assigned for identification of aircraft on Defense Visual Flight Rules (DVFR) flight plans. Additionally, document any restrictions, agreements on beacon code assignments, and adaptations in the supplement. Update the Service Area Directorate supplement as needed and forward a copy to Air Traffic Procedures Directorate for review.

(5) Coordinate with other Service Area Directorates to prevent beacon code assignment conflicts between adjacent terminal and flight service facilities. Service Area Directorates with facilities that are adjacent to international boundaries will assist Air Traffic Procedures Directorate to ensure coordination with adjacent international facilities (such as facilities in Canada, Mexico, Cuba, and the Bahamas) is accomplished.

c. Air Traffic Control (ATC) Facilities must:

(1) Ensure that beacon code usage is in compliance with the ARTCC / Service Area Directorate’s beacon code assignments outlined in this document and Service Area supplements.

(2) Adjust appropriate computer parameters to optimize code-use times. (3) Forward to the Service Area Directorates all requests for additional code assignments

9. Justification Requirements.

accompanied by the explanation specified in Justification Requirements, paragraph 9, of this order. Ensure that requests for codes dedicated to a specific function or to be used for a unique purpose are approved sparingly, since this will limit the overall number of codes available for general use. Examples of unique purposes include but are not limited to: VFR traffic penetrating Class B airspace, and practice instrument approaches.

8. Code Assignments.

a. ARTCC- the Air Traffic Procedures Directorate must assign internal, external and tertiary center code blocks.

b. CERAP, Terminal, FSS/AFSS, NAS Stakeholder, Unique Purpose, or Experimental Activities- codes must be assigned by the Service Area Directorates and documented in the Service Area Directorates supplement.

c. Military- codes are allocated in this order (Appendix A, Table A-1) and specified in FAA ORDER JO 7610.4, Special Operations. Additional DOD requirements must be forwarded to the appropriate Directorate for consideration.

d. Full code blocks- are designated in the Appendices to this document by the base, non-discrete, code of that block. Example - 2600 indicates codes 2601 through 2677. The non-discrete code, 2600 in this example, will normally not be assigned. Code 0000 must never be assigned. Where partial blocks are allocated, the actual range of codes will be listed.

e. DVFR- special procedures are required for VFR flights into, within or out of the United States ADIZ. Code assignments are made by AFSS when a flight plan is activated for a VFR flight that will fly into, out of, or within the ADIZ. (See FAA ORDER JO 7110.10, Flight Services, 6-1, Flight Data, and 7-2, Customs Notification and ADIZ Requirements).

9. Justification Requirements. a. ARTCC’s- must submit all requests for additional beacon codes or allocation adjustments through their Service Area Directorate to Air Traffic Procedures Directorate. Justifications must include full rationale with traffic counts, specific cases/issues, and any other supporting data. Requests will be evaluated using existing code utilization statistics and potential impact on the NAS.

b. Terminal, AFSS and CERAP- must forward requests to their Service Area Directorate with supporting documentation, which must include quantifiable justification such as traffic count or projected peaks.

c. NAS Stakeholder, Unique Purpose and Experimental Activity- must submit a detailed letter to the facility or the Service Area Directorate with supporting documentation indicating intended use, safety considerations; duration needed, and impact if not approved.

11. Definitions.

10. Distribution. This order is distributed to select offices in Washington Headquarters, Service Area Directors, the William J. Hughes Technical Center, the Mike Monroney Aeronautical Center, all air traffic control facilities, and all flight standards and international aviation field offices.

11. Definitions.

a. Beacon Code Assignment - actual distribution of specific codes from within the National Beacon Code Allocation Plan to specific facilities and/or special activities as defined in the Appendices to this document.

b. Beacon Code Set - comprised of four octal digits in which the decimal numbers "8" and "9" are not used. There are 4096 possible codes (0000-7777).

c. Code Block - defined by the first two octal digits of the code (e.g., 00##, 12##). There are 64 different code blocks. Any code block described in this order by the non-discrete code ending in “00”

(e.g. 2100, or 1000) refers to the entire block (e.g., 2101-2177 or 1001-1077).

d. Non-discrete Codes - codes that end in “##00”. There are 64 non-discrete codes. Assign nondiscrete codes based on guidance found in FAA ORDER JO 7110.65, Air Traffic Control, Chapter 5, 5- 2-6 through 5-2-10. Non-discrete codes may also be assigned by the Air traffic Procedures Directorate. Code “0000” should never be assigned or used.

e. Discrete Code - the last two digits (e.g., ##01, ##43). There are 63 discrete codes in every block with 4032 total.

f. Code Subset - series of discrete beacon codes within a code block. It is described by the lowest and highest number in the subset (e.g., 2110 - 2120 = 9 discrete codes; (i.e., 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117 and 2120).

g. Computer Assigned Code - beacon code assigned to a specific flight plan as the result of a program function or a controller message input.

h. DVFR - procedures governing aircraft flying VFR through or within an (ADIZ).

i. External Code - beacon code reserved for computer assignment to a flight plan with one or more route segments not contained within a single domestic ARTCC’s airspace.

j. Internal Code - beacon code reserved for computer assignment to a flight plan where all route segments are contained in a single domestic ARTCC’s airspace.

k. Function Codes - non-discrete beacon codes utilized in accordance with FAA ORDER JO 7110.65, paragraph 5-2-6, Function Code Assignments.

l. Primary Code Blocks - blocks of codes in an ARTCC’s computer from which code assignments are first attempted. Primary blocks are adapted for internal and external flight plans.

m. Secondary Code Block - blocks of codes in an ARTCC’s computer from which code

assignment is attempted only when all discrete codes in the primary code blocks are not available. Secondary blocks are adapted for internal and external flight plans.

n. Service Area Beacon Code Supplement - document maintained by service area specialist that documents the assignment of beacon codes to facilities other than ARTCC’s; (i.e., TRACON’s, Tower’s, Military units, etc.).

o. Tertiary Code Blocks - blocks of codes in an ARTCC's computer from which code assignment is attempted when no codes from either the primary or secondary code blocks are available. Tertiary blocks are adapted as a final back-up for external flight plans to avoid complete depletion for unique codes.

Sharon Kurywchak Director (A), Air Traffic Procedures Air Traffic Organization

7110.66E – Appendix A.

7110.66F – Appendix A. Table A-1 National Beacon Code Allocation Summary 0100-0400 Allocated to Service Area Operations for use by Terminal/CERAP, NAS Stakeholder, Unique Purpose and Experimental activities.

1000 Used exclusively by ADS-B Aircraft to inhibit Mode 3A transmit

1200 Visual Flight Rules (VFR) aircraft that may or may not be in radio contact with an ATC Facility. 1201 For use by VFR aircraft in the immediate vicinity of LAX IAW FAR 93.95. 1202 Reserved for use by VFR gliders not in contact with ATC. 1205 (1)Reserved for use by VFR Helicopters within the Los Angeles region that may or may not be in contact with ATC. (2) VFR aircraft departing the DC Special Flight Rules Area (DC SFRA) fringe airports I.A.W. FAR 93.345.

1206 Reserved for use by VFR Law Enforcement, First Responder, Military and Public Service helicopters within the Los Angeles region that may or may not be in contact with ATC. 1234 VFR aircraft conducting pattern work at airports in the DC SFRA I.A.W. FAR 93.339. 1207-1233, 1235-1254, 1256-1272 Discrete 1200 series codes allocated to Service Area Operations for assignment to air traffic facilities as needed for Unique Purpose VFR Programs (example: DVFR, tour operator). 1255 Firefighting aircraft. 1273-1275 Calibration Performance Monitoring Equipment (CPME), MRSM, and PARROT transponders. 1276 Air Defense Identification Zone (ADIZ) penetration when unable to establish communication with ATC or aeronautical facility. 1277 Designated Search and Rescue (SAR) aircraft. 0100-0700, 1100, 1300, Non-discrete code assignments in accordance with FAA ORDER JO 7110.65, 1500, 2000*, 2100, paragraph 5-2-2 Discreet Environment. 2000*, for use in oceanic airspace, 2200, 2300, 2400, 4000 unless another code is assigned by ATC.

4400 SR-71, F-12, U-2, B-57, pressure suit flights and aircraft operations above FL 600 in accordance with FAA ORDER JO 7110.65, paragraph 5-2-10., Beacon Code for Pressure Suit Flights Above FL 600. 4401-4433, 4466-4477 Reserved in accordance with FAA ORDER JO 7110.67, Special Aircraft 4434-4437 Weather reconnaissance, as appropriate. 4440-4441 Operations above FL600 for Lockheed/NASA from Moffett Field. 4442-4446 Operations above FL600 for Lockheed from Air Force Plant 42. 4447-4452 Allocated by the FAA for use in support of special flight activities I.A.W. FAA ORDER JO 7110.67. 4453 High balloon operations – National Scientific Balloon Facility, Palestine TX, and other providers, some in international operations. 4454-4465 Air Force operations above FL600 as designated in FAA ORDER JO 7610.4, Special 5100-5300 May be used by DOD aircraft beyond radar coverage but inside U.S. controlled airspace with coordination as appropriate with applicable Area Operations Directorate. DOD aircraft outside U.S. controlled airspace need to coordinate with the applicable Flight Information Region‘s (FIR) air traffic authorities. 5100 and 5200 are also allocated by PCT for use in the DC SFRA and FRZ 5000-5057, 5063-5077 Reserved for use by DOD. The use of these code blocks can only be 5400, 6100, 6400, 7501- authorized and/or assigned by HQ NORAD or its designated 7577 representative. For information on the use of these codes contact NORAD J33C, [email protected]

5061,5062, 5100, 5200, Allocated by the FAA to Potomac TRACON (PCT) for use in the DC Special Flight Rules Area (SFRA) and Flight Restricted Zone (FRZ). Codes 5061 and 5062 will revert back to the DOD allocation code block when no longer needed in support of the NCR ADIZ. 7601-7607, 7701-7707 Allocated by the FAA for special use by Federal Law Enforcement Agencies. 7400 Reserved for an unmanned aircraft experiencing a lost link situation.

7500 Hijack in accordance with FAA ORDER JO 7610.4.

7600 Radio Failure in accordance with FAA ORDER JO 7110.65, paragraph 5-2-8 Radio Failure.

7700 Emergency in accordance with FAA ORDER JO 7110.65, paragraph 5-2-7 Emergency Code Assignment 7777 DOD interceptor aircraft on active air defense missions and operating without ATC clearance in accordance with FAA ORDER JO 7610.4.

0500, 0600, 0700, 1100 1300, 1400, 1500, 1600 1700, 2000*, 2100, 2200 2300, 2400, 2500, 2600 2700, 3000, 3100, 3200 3300, 3400, 3500, 3600 3700, 4000, 4100, 5600 5700, 6000, 6200, 6300 6500, 6600, 6700, 7000 7100, 7200, 7300, 7610-7676, 7710-7776

External ARTCC subsets (Discrete codes of blocks only except for first primary block, which is used as the ARTCC’s non-discrete code if all discrete codes are assigned.) 2000*, for use in oceanic airspace, unless another code is assigned by ATC.

0000, 4200, 4300, 4500, 4600, 4700, 5100, 5200, 5300, 5500

Internal ARTCC subsets assigned by En Route Procedures Group, AJV-83. (Discrete codes only except for first primary block to be used as non-discrete if all discrete codes are assigned.)

Exceptions for operational need are approved by Air traffic Procedures Directorate AJV-8

7110.66E - Appendix B National Beacon Code Allocation Details

7110.66F - Appendix B National Beacon Code Allocation Details

Table B-1 ARTCC Code Categories

I Internal Departures E External Departures M Military S Special Use

Table B-2 ARTCC Computer Adaptation Sequence

P Primary Code Block

S Secondary Code Block

T Tertiary Code Block

(AAn) Adaptation Sequence (Priority)

Table B-3 ARTCC Assignments

ARTCC Code Thru Code Priority KZAK 1100 ATOP KZWY 1000 ATOP ZAB 0700 EP-1 ZAB 2600 EP-2 ZAB 1500 ES-1 ZAB 1600 ES-2 ZAB 4100 ES-3 ZAB 3001 - 3020 ET-1 ZAB 3101 - 3134 ET-2 ZAB 3501 - 3515 ET-3 ZAB 5601 - 5621 ET-4 ZAB 6024 - 6047 ET-5 ZAB 7001 - 7020 ET-6 ZAB 4200 IP-1 ZAB 4300 IP-2 ZAB 5500 IS-1 ZAN 3400 E ZAN 4100 E ZAN 5700 E ZAN 7200 E ZAN 4000 ES ZAN 5600 ES

ZAN 2200 I ZAN 2300 I ZAN 4200 I ZAN 4500 I ZAN 4600 I ZAN 4700 I ZAN 4800 I ZAN 4900 I ZAN 5100 I ZAN 5200 I ZAN 5300 M ZAN 5500 M ZAN 3100 IS ZAN 3500 IS ZAU 1300 EP-1 ZAU 3100 EP-2 ZAU 6200 EP-3

ARTCC Code Thru Code Priority ZAU 6500 EP-4 ZAU 3200 ES-1 ZAU 3500 ES-2 ZAU 5600 ES-3 ZAU 7200 ES-4 ZAU 0500 ET-1 ZAU 2200 ET-2 ZAU 4300 IP-1 ZAU 5300 IP-2 ZAU 0001 - 0007 IS-1 ZAU 0011 - 0017 IS-2 ZAU 0021 - 0027 IS-3 ZAU 0031 - 0037 IS-4 ZAU 0041 - 0047 IS-5 ZAU 0051 - 0057 IS-6 ZAU 0061 - 0067 IS-7 ZAU 0071 IS-8 ZAU 4700 IS-9 ZAU 5500 IS-10 ZBW 3400 EP-1 ZBW 3500 EP-2 ZBW 1300 ES-1 ZBW 1400 ES-2 ZBW 2000 - 2007 ES-3 ZBW 7300 ES-4 ZBW 2400 ET-1 ZBW 7000 ET-2 ZBW 5300 IP-1 ZBW 0000 IS-1 ZBW 4600 IS-2 ZBW 4700 IS-3 ZBW 5500 IS-4 ZDC 0500 EP-1 ZDC 2100 EP-2 ZDC 2400 EP-3 ZDC 3600 EP-4 ZDC 5600 EP-5 ZDC 7000 EP-6 ZDC 1300 ES-1 ZDC 6200 ES-2 ZDC 6500 ES-3 ZDC 3500 ET-1 ZDC 3700 ET-2 ZDC 4600 IP-1 ZDC 5300 IP-2

ARTCC Code Thru Code Priority ZDC 0000 IS-1 ZDC 4700 IS-2 ZDC 5500 IS-3 ZDV 1400 EP-1 ZDV 0600 ES-1 ZDV 2700 ES-2 ZDV 3700 ES-3 ZDV 6500 ES-4 ZDV 2212 - 2235 ET-1 ZDV 3333 - 3377 ET-2 ZDV 3401 - 3427 ET-3 ZDV 5622 - 5642 ET-4 ZDV 6644 - 6655 ET-5 ZDV 7441 - 7453 ET-6 ZDV 5100 IP-1 ZDV 0000 IS-1 ZDV 4300 IS-2 ZDV 5500 IS-3 ZFW 0500 EP-1 ZFW 2200 EP-2 ZFW 2300 EP-3 ZFW 3400 ES-1 ZFW 3600 ES-2 ZFW 6200 ES-3 ZFW 0613 - 0677 ET-1 ZFW 3021 - 3077 ET-2 ZFW 3241 - 3264 ET-3 ZFW 7041 - 7077 ET-4 ZFW 5100 IP-1 ZFW 5200 IP-2 ZFW 4500 IS-1 ZFW 5300 IS-2 ZHU 2400 EP-1 ZHU 2500 EP-2 ZHU 2700 ES-1 ZHU 4000 ES-2 ZHU 7200 ES-3 ZHU 7300 ES-4 ZHU 7401 ES-5 ZHU 6600 ET-1 ZHU 6700 ET-2 ZHU 4500 IP-1 ZHU 4600 IP-2 ZHU 4200 IS-1 ZHU 4700 IS-2

ARTCC Code Thru Code Priority ZHU 5200 IS-3 ZHU 0000 IT-1 ZHU 5101 - 5127 IT-2 ZHU 5146 - 5177 IT-3 ZID 4000 EP-1 ZID 6600 EP-2 ZID 6700 EP-3 ZID 1400 ES-1 ZID 3400 ES-2 ZID 3700 ES-3 ZID 7300 ES-4 ZID 2601 - 2642 ET-1 ZID 2701 - 2735 ET-2 ZID 3001 - 3042 ET-3 ZID 4200 IP-1 ZID 4500 IP-2 ZID 5500 IS-1 ZJX 0700 EP-1 ZJX 1000 EP-2 ZJX 2600 EP-3 ZJX 1500 ES-1 ZJX 1600 ES-2 ZJX 3000 ES-3 ZJX 3200 ES-4 ZJX 6200 ES-5 ZJX 7300 ES-6 ZJX 2700 ET-1 ZJX 6500 ET-2 ZJX 6700 ET-3 ZJX 7610 - 7676 ET-4 ZJX 7710 - 7776 ET-5 ZJX 4200 IP-1 ZJX 4300 IP-2 ZJX 5500 IP-3 ZJX 7401 IS-1 ZJX 3400 IT-1 ZKC 1100 EP-1 ZKC 1700 EP-2 ZKC 2100 EP-3 ZKC 2500 ES-1 ZKC 5700 ES-2 ZKC 2001 - 2020 ET-1 ZKC 3301 - 3311 ET-2 ZKC 6001 - 6023 ET-3 ZKC 7101 - 7120 ET-4

ARTCC Code Thru Code Priority ZKC 7401 - 7440 ET-5 ZKC 4600 IP-1 ZKC 4700 IP-2 ZKC 5200 IS-1 ZLA 1000 EP-1 ZLA 7200 EP-2 ZLA 7300 EP-3 ZLA 1300 ES-1 ZLA 2000 ES-2 ZLA 6700 ES-3 ZLA 2401 ET-1 ZLA 7610 - 7675 ET-2 ZLA 7710 - 7776 ET-3 ZLA 4600 IP-1 ZLA 4700 IP-2 ZLA 5100 IS-1 ZLA 5300 IS-2 ZLC 6000 EP-1 ZLC 0500 ES-1 ZLC 3100 ES-2 ZLC 4000 ES-3 ZLC 0701 - 0710 ET-1 ZLC 0716 - 0720 ET-2 ZLC 0726 - 0730 ET-3 ZLC 2201 - 2211 ET-4 ZLC 2301 - 2332 ET-5 ZLC 2501 - 2512 ET-6 ZLC 4100 ET-7 ZLC 5601 - 5611 ET-8 ZLC 6201 - 6211 ET-9 ZLC 7401 - 7411 ET-10 ZLC 7610 - 7676 ET-11 ZLC 7710 - 7776 ET-12 ZLC 4300 IP-1 ZLC 4200 IS-1 ZLC 5200 IS-2 ZLC 5300 IS-3 ZMA 1400 EP-1 ZMA 3600 EP-2 ZMA 3700 EP-3 ZMA 7401 EP-4 ZMA 1100 ES-1 ZMA 1300 ES-2 ZMA 2100 ES-3 ZMA 2300 ES-4

ARTCC Code Thru Code Priority ZMA 3300 ES-5 ZMA 3500 ES-6 ZMA 5700 ES-7 ZMA 6000 ES-8 ZMA 6600 ES-9 ZMA 0500 ET-1 ZMA 2200 ET-2 ZMA 5600 ET-3 ZMA 7000 ET-4 ZMA 7100 ET-5 ZMA 7610 - 7676 ET-6 ZMA 7710 - 7776 ET-7 ZMA 0000 IP-1 ZMA 4500 IP-2 ZMA 4600 IP-3 ZMA 4700 IP-4 ZMA 4200 IS-1 ZMA 5100 IS-2 ZMA 5300 IS-3 ZME 1500 EP-1 ZME 1600 EP-2 ZME 5600 EP-3 ZME 0700 ES-1 ZME 1000 ES-2 ZME 1300 ES-3 ZME 7610 - 7676 ET-1 ZME 7710 - 7776 ET-2 ZME 4300 IP-1 ZME 5500 IP-2 ZME 4500 IS-1 ZME 5300 IS-2 ZMP 2400 EP-1 ZMP 2600 EP-2 ZMP 3600 EP-3 ZMP 1600 ES-1 ZMP 3000 ES-2 ZMP 7000 ES-3 ZMP 1501 - 1532 ET-1 ZMP 3312 - 3332 ET-2 ZMP 6700 ET-3 ZMP 4200 IP-1 ZMP 4500 IP-2 ZMP 4600 IS-1 ZMP 5200 IS-2 ZNY 1100 EP-1

ARTCC Code Thru Code Priority ZNY 1500 EP-2 ZNY 1600 EP-3 ZNY 1700 EP-4 ZNY 2600 EP-5 ZNY 2700 EP-6 ZNY 3000 EP-7 ZNY 3300 EP-8 ZNY 7100 EP-9 ZNY 1000 ES-1 ZNY 2200 ES-2 ZNY 2300 ES-3 ZNY 4000 ES-4 ZNY 6601 - 6666 ES-5 ZNY 6725 - 6777 ET-1 ZNY 7610 - 7676 ET-2 ZNY 7710 - 7776 ET-3 ZNY 4200 IP-1 ZNY 4500 IS-1 ZNY 4600 IS-2 ZOA 3200 EP-1 ZOA 3300 EP-2 ZOA 1700 ES-1 ZOA 3600 ES-2 ZOA 3700 ES-3 ZOA 6300 ES-4 ZOA 0601 - 0647 ET-1 ZOA 2212 - 2235 ET-2 ZOA 3001 - 3020 ET-3 ZOA 7441 - 7464 ET-4 ZOA 4200 IP-1 ZOA 4500 IP-2 ZOA 4300 IS-1 ZOA 5500 IS-2 ZOA 7000 IS-3 ZOB 4100 EP-1 ZOB 5700 EP-2 ZOB 7401 EP-3 ZOB 1000 ES-1 ZOB 2100 ES-2 ZOB 2300 ES-3 ZOB 2500 ES-4 ZOB 6000 ES-5 ZOB 7200 ES-6 ZOB 0500 ET-1 ZOB 0600 ET-2

ARTCC Code Thru Code Priority ZOB 0700 ET-3 ZOB 6300 ET-4 ZOB 5100 IP-1 ZOB 5200 IP-2 ZOB 4500 IS-1 ZSE 3500 EP-1 ZSE 6600 EP-2 ZSE 1500 ES-1 ZSE 1600 ES-2 ZSE 0650 - 0677 ET-1 ZSE 2236 - 2277 ET-2 ZSE 3430 - 3477 ET-3 ZSE 7412 - 7477 ET-4 ZSE 4600 IP-1 ZSE 4700 IP-2 ZSE 5100 IS-1 ZSE 5200 IS-2 ZTL 2000 EP-1 ZTL 2500 EP-2 ZTL 3100 EP-3 ZTL 7100 EP-4 ZTL 1100 ES-1 ZTL 1700 ES-2 ZTL 2200 ES-3 ZTL 3300 ES-4 ZTL 3500 ES-5 ZTL 4134 - 4177 ES-6 ZTL 5700 ES-7 ZTL 6000 ES-8 ZTL 7200 ES-9 ZTL 5100 IP-1 ZTL 5200 IP-2 ZTL 2600 IS-1 ZTL 4700 IS-2 ZTL 5300 IS-3