Radar Vectors
FAA Order Cancelled Issued Jun 28, 2018 AJV-8 8 pages Copy saved Nov 18, 2026

Order JO 7110.126 Consolidated Wake Turbulence Radar Separation Standards

This document is cancelled. Cancelled by JO 7110.126A. Check the official source before relying on it.

Official source ↗ Open PDF

Distribution: Electronic Initiated By: AJV-8 Mission Support, Terminal Procedures

1. Purpose of This Order. This order provides procedural guidance to FAA Order JO 7110.65, Air Traffic Control, and the Pilot/Controller Glossary, related to the use of Wake Turbulence procedures and radar separation minima.

2. Audience. This order applies to all air traffic personnel at facilities authorized to use this order for operational air traffic control services.

3. Where Can I Find This Order? This order is available on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices/.

4. Requirements.

a. Facilities must receive a Letter of Authorization from the Director, Air Traffic Procedures, AJV–8, prior to the implementation of Consolidated Wake Turbulence Radar Separation Standards (CWT) procedures.

b. At facilities authorized to use this order for air traffic control services, the applicable provisions of FAA Order JO 7110.65, Air Traffic Control, are superseded by the corresponding provisions contained in this order.

c. Personnel providing air traffic control service must receive training on CWT procedures prior to implementation, or prior to assuming an operational position if the training occurs post implementation.

d. Terminal Automation Systems must have the CWT functions activated and all operational personnel appropriately trained prior to the use of this order.

e. Tower facilities must be equipped with a Flight Data Input/Output (FDIO), Electronic Flight Strip Transfer System (EFSTS), an equivalent electronic flight progress strip system or develop manual procedures to indicate the Wake Category on flight progress strips.

f. Facility documents must be updated, as appropriate, to reflect CWT procedures.

g. Facilities must submit a weekly report of any wake encounter reports and Mandatory Occurrence Reports (MOR) concerning wake turbulence for the first six months after implementation.

h. Air Traffic Procedures, AJV–8, must notify Air Traffic Safety Oversight Services (AOV) of facilities authorized to use CWT procedures and separation minima.

5. Background. Over the last several years, knowledge about wake vortex behavior in the operational environment has increased due to multiple advances in measurement techniques, available automated surveillance data, and improved understanding of physical processes. The FAA has undertaken an

Effective Date

July 17, 2018

Air Traffic Organization Policy

SUBJ: Consolidated Wake Turbulence Radar Separation Standards

ORDER JO 7110.126

ORDER JO 7110.126

effort to recategorize the existing fleet of aircraft and modify the associated wake turbulence separation minima.

Prior to the Recategorization (Recat) effort, approach and departure wake turbulence separations were based on Maximum Certificated Gross Takeoff Weight (MCGTOW). These separations have proven to be very safe for wake vortex hazards. This results in greater than necessary separation distances, especially within the heavy weight class. For example, the current heavy-behind-heavy separation is four miles. This separation is appropriate for a B767 following a B747, but not necessary when the B747 is following the B767.

Under the Recat 1.5 program, aircraft are classified according to wingspan and the aircraft’s ability to withstand a wake encounter, as well as the certificated takeoff weight. This method results in six categories of aircraft for wake turbulence separation purposes. The categories separate the current heavy and large weight classes into four wake categories: two for heavy and two for large. The A388 and A225 become their own Wake Category, and the current weight class of small remains as its own Wake Category.

Recat Phase II, both Appendix A and Appendix B, describes a pairwise separation matrix developed for the most common ICAO type identifier aircraft that comprise 99% of the operations at 32 airports within the U.S. Each aircraft is addressed as both a leader and a follower in each pair. The development of a pairwise separation matrix relies on wake-based data, rather than weight-based data. Separation reduction is achieved with a better understanding of wake behavior and with pairwise separation of aircraft.

All four of these sets of separation standards have been approved by Safety and Technical Training (AJI) and AOV and have been proven safe operationally. Each set of standards have shown operational benefits for certain aircraft pairings compared to other sets of standards.

The goal of CWT is to use the most operationally advantageous set of separation standards derived from the four current set of standards. This has resulted in using all time-based wake turbulence separation standards from FAA Order JO 7110.65. Radar-based wake turbulence separation will be based on a categorical system that further refines the grouping of aircraft to provide throughput gains at many of today’s constrained airports and yet will be manageable at all airports throughout the NAS. Original Signed by Sharon Kurywchak 6/25/18 Sharon Kurywchak … Director (A), Air Traffic Procedures Date

Appendix A

Appendix A

Appendix A. Aircraft Wake Categories

Category A – A388. Category B – Pairwise Upper Heavy Aircraft. Category C – Pairwise Lower Heavy Aircraft Category D – Non-Pairwise Heavy Aircraft.

Category E – B757 Aircraft. Category F – Upper Large Aircraft excluding B757 aircraft. Category G – Lower Large Aircraft. Category H – Upper Small Aircraft with a maximum takeoff weight of more than 15,400 pounds up to 41,000 pounds. Category I – Small Aircraft with a maximum takeoff weight of 15,400 pounds or less.

Appendix A. Aircraft Wake Categories

TBL A–1 Aircraft Types Categorized A B C Lower Heavy

D Non-Pairwise

Heavy

E F G H I

Super Upper

Heavy B757 Upper Large Lower Large Upper

Small

Lower

Small

A388 A332 A306 A124 DC85 B752 A318 C130 AT43 E170 ASTR BE10 A333 A30B A339 DC86 B753 A319 C30J AT72 E45X B190 BE20 A343 A310 A342 DC87 A320 CVLT CL60 E75L BE40 BE58 A345 B762 A3ST E3CF A321 DC93 CRJ1 E75S B350 BE99 A346 B763 A400 E3TF B712 DC95 CRJ2 F16 C560 C208 A359 B764 A50 E6 B721 DH8D CRJ7 F18H C56X C210 B742 C17 AN22 E767 B722 E190 CRJ9 F18S C680 C25A B744 DC10 B1 IL62 B732 GL5T CRJX F900 C750 C25B B748 K35R B2 IL76 B733 GLEX DC91 FA7X CL30 C402 B772 MD11 B52 IL86 B734 GLF5 DH8A GLF2 E120 C441 B773 B703 IL96 B735 GLF6 DH8B GLF3 F2TH C525 B77L B741 K35E B736 MD82 DH8C GLF4 FA50 C550 B77W B743 KE3 B737 MD83 E135 SB20 GALX P180 B788 B74D L101 B738 MD87 E145 SF34 H25B PAY2 B789 B74R MYA4 B739 MD88 LJ31 PA31 C5 B74S R135 MD90 LJ35 PC12 C5M B78X T144 LJ45 SR22 BLCF T160 LJ55 SW3 BSCA TU95 LJ60 C135 VMT SH36 C141 SW4 NOTE – 1. Currently, Small Plus aircraft are defined as aircraft that weigh more than 12,500 pounds and 41,000 pounds or less. This order changes the lower boundary of Upper Small aircraft to 15,400 pounds, which coincides with the boundary of ICAO Light Aircraft and Medium Aircraft; however, be aware, there are some Small Plus aircraft contained in the Lower Small Category I.

2. The A225 is treated as a NOWGT aircraft.

3. TBL A-1 contains the most common aircraft for all Wake Categories; however, all aircraft are contained in the automation database and will display their associated wake category on the radar display and machine generated flight strip.

Appendix B. Amend the following paragraphs in FAA Order JO 7110.65 2–3–4. TERMINAL DATA ENTRIES

Appendix B. Amend the following paragraphs in FAA Order JO 7110.65 2–3–4. TERMINAL DATA ENTRIES

Title through TBL 2-3-3, block 2A, no change

TBL 2-3-3

Block Information Recorded

3. Number of aircraft if more than one, aircraft Wake Category indicator, type of aircraft, and aircraft equipment suffix.

TBL 2–3–3, block 4 through TBL 2–3–4, block 2A, no change

TBL 2-3-4

Block Information Recorded

3. Number of aircraft if more than one, aircraft Wake Category indicator, type of aircraft, and aircraft equipment suffix.

TBL 2–3–4, block 4 through TBL 2–3–5, block 2A, no change

TBL 2-3-5

No further changes to paragraph

Block Information Recorded

3. Number of aircraft if more than one, aircraft Wake Category indicator, type of aircraft, and aircraft equipment suffix.

5–5–4. MINIMA

5–5–4. MINIMA

Title through a.4., no change

NOTE− Wake turbulence procedures specify increased separation minima required for certain categories of aircraft because of the possible effects of wake turbulence.

b. through WAKE TURBULENCE APPLICATION, no change

g. Separate aircraft by the minima specified in TBL 5–5–1 in accordance with the following:

1. When operating within 2,500 feet and less than 1,000 feet below the flight path of the leading aircraft over the surface of the earth of a Category A, B, C or D aircraft.

2. When operating within 2,500 feet and less than 500 feet below the flight path of the leading aircraft over the surface of the earth of a Category E aircraft.

3. When departing parallel runways separated by less than 2,500 feet, the 2,500 feet requirement in subparagraph 2 is not required when a Category I aircraft departs the parallel runway behind a Category E aircraft. Issue a wake turbulence cautionary advisory and instructions that will establish lateral separation in accordance with subparagraph 2. Do not issue instructions that will allow the Category I aircraft to pass behind the Category E aircraft.

NOTE– 1. The application of paragraph 5–8–3, Successive or Simultaneous Departures, satisfies this requirement.

2. Consider runways separated by less than 700 feet as a single runway because of the possible effects of wake turbulence.

REFERENCE– FAA Order JO 7110.65, Para 3–9–6, Same Runway Separation.

TBL 5–5–1 Wake Turbulence Separation for Directly Behind

Follower

A B C D E F G H I

A B C D E F G H I

Leader

A 4.5 NM 6 NM 6 NM 7 NM 7 NM 7 NM 7 NM 8 NM

B 3 NM 4 NM 4 NM 5 NM 5 NM 5 NM 5 NM 5 NM

C 3.5 NM 3.5 NM 3.5 NM 5 NM 5 NM

D 3 NM 4 NM 4 NM 5 NM 5 NM 5 NM 5 NM 5 NM

E 4 NM

F

G

H

I

Appendix B

WAKE TURBULENCE APPLICATION

h. ON APPROACH. In addition to subparagraph g, separate an aircraft on approach behind another aircraft to the same runway by ensuring the separation minima in TBL 5–5–2 will exist at the time the preceding aircraft is over the landing threshold.

WAKE TURBULENCE APPLICATION

NOTE− Consider parallel runways less than 2,500 feet apart as a single runway because of the possible effects of wake turbulence.

TBL 5–5–2 Wake Turbulence Separation for On Approach

i. through j., no change 1. Wake turbulence separation must be applied in accordance with TBL 5–5–2. 2. An average runway occupancy time of 50 seconds or less is documented; 3. CTRDs are operational and used for quick glance references;

REFERENCE– FAA Order JO 7110.65, Para 3−1−9, Use of Tower Radar Displays.

4. Turnoff points are visible from the control tower. No further changes to paragraph

Follower

A B C D E F G H I

A B C D E F G H I

Leader

A 4.5 NM 6 NM 6 NM 7 NM 7 NM 7 NM 7 NM 8 NM

B 3 NM 4 NM 4 NM 5 NM 5 NM 5 NM 5 NM 6 NM

C 3.5 NM 3.5 NM 3.5 NM 5 NM 6 NM

D 3 NM 4 NM 4 NM 5 NM 5 NM 5 NM 6 NM 6 NM

E 4 NM

F 4 NM

G

H

I

5–8–3. SUCCESSIVE OR SIMULTANEOUS DEPARTURES

TERMINAL

Except for when wake turbulence separation is required, separate aircraft departing from the same airport/heliport or adjacent airports/heliports in accordance with the following minima provided radar identification with the aircraft will be established within 1 mile of the takeoff runway end/helipad and courses will diverge by 15 degrees or more.

5–8–3. SUCCESSIVE OR SIMULTANEOUS DEPARTURES

REFERENCE– FAA Order JO 7110.65, Para 3–9–7, Wake Turbulence Separation for Intersection Departures. FAA Order JO 7110.65, Para 3–9–8, Intersecting Runway/Intersecting Flight Path Operations. FAA Order JO 7110.65, Para 5–5–4, Minima, Subparagraph g.

Note 1 through FIG 5–8–3, no change

FIG 5–8–3 Note, References, delete

b. through FIG 5–8–5, no change

FIG 5–8–5 Note, delete

No further changes to paragraph

7–4–3. CLEARANCE FOR VISUAL APPROACH

7–4–3. CLEARANCE FOR VISUAL APPROACH

Title through c3, no change

d. When wake turbulence separation is required, aircraft must be informed of the preceding airplane manufacturer and/or model.

NOTE-- Visual separation is not authorized when the lead aircraft is a super.

REFERENCE– FAA Order JO 7110.65, Para 7–2–1, Visual Separation.

EXAMPLE− “Cessna Three Four Juliet, following a heavy Boeing 747, 12 o’clock, seven miles.”

or

“Cessna Three Four Juliet, following a Seven-Fifty-Seven, 12 o’clock, four miles.”

REFERENCE− FAA Order JO 7110.65, Para.2−4−21, Description of Aircraft Types. FAA Order JO 7110.65, Para 5–5–4, Minima, Subparagraph g.

No further changes to paragraph

7–4–4. APPROACHES TO MULTIPLE RUNWAYS

7–4–4. APPROACHES TO MULTIPLE RUNWAYS

Title through c., no change

1. Parallel runways separated by less than 2,500 feet. Unless approved separation is provided by ATC, an aircraft must report sighting a preceding aircraft making an approach (instrument or visual) to the adjacent parallel runway. When an aircraft reports another aircraft in sight on the adjacent final approach course and visual separation is applied, controllers must advise the succeeding aircraft to maintain visual separation. Do not permit an aircraft to overtake another aircraft when wake turbulence separation is required.

NOTE– Visual separation is not authorized when the lead aircraft is a super.

REFERENCE– FAA Order JO 7110.65, Para 5–5–4, Minima, Subparagraph g. FAA Order JO 7110.65, Para 7–2–1 Visual Separation.

No further changes to paragraph

7–6–7. SEQUENCING

7–6–7. SEQUENCING

Title through c.1., no change

2. When parallel runways are less than 2,500 feet apart, do not permit an aircraft to overtake another aircraft established on final within the facility’s area of responsibility when wake turbulence separation is required.

REFERENCE– FAA Order JO 7110.65, Para 5–5–4, Minima, Subparagraph g.

PILOT/CONTROLLER GLOSSARY

PILOT/CONTROLLER GLOSSARY

AIRCRAFT WAKE CATEGORIES - For the purposes of Radar Wake Turbulence Separation Minima, aircraft are categorized as Category A through Category I. Each aircraft is assigned a category based on several performance and physical characteristics in addition to the MCGTOW.