Radar Vectors
FAA Order Cancelled Issued Aug 5, 2015 AJV-8 2 pages Copy saved Nov 18, 2026

Order JO 7110.120 Fused Display Mode (Fusion) using Micro-En Route Automatic Tracking System (Micro-EARTS) at Anchorage Air Route Traffic Control Center (ZAN) for 5 NM Separation

This order prescribes interim guidance for the use of Fusion which combines ADS-B surveillance data with primary, secondary, and Wide Area Multilateration (WAM) radar data into a single track for each aircraft in the provision of ATC services at ZAN using Micro-EARTS for 5 NM Separation.

This document is cancelled. Cancelled by JO 7110.124. Check the official source before relying on it.

Official source ↗ Open PDF

Distribution: Electronic Initiated By: AJV-8

FAA Logo

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Air Traffic Organization Policy

Effective Date: August 06, 2015 SUBJ: Fused Display Mode (Fusion) using Micro-En Route Automatic Tracking System (Micro- EARTS) at Anchorage Air Route Traffic Control Center (ZAN) for 5 NM Separation.

FEDERAL AVIATION ADMINISTRATION

1. Purpose of This Order. This order prescribes interim guidance for the use of Fusion which combines ADS-B surveillance data with primary, secondary, and Wide Area Multilateration (WAM) radar data into a single track for each aircraft in the provision of ATC services at ZAN using Micro-EARTS for 5 NM Separation.

2. Audience. This order applies to ZAN using Micro-EARTS.

3. Where Can I Find This Order? This order is available on the MyFAA employee Web site at https://employees.faa.gov/tools_resources/orders_notices/ and on the FAA Web site at http://www.faa.gov/regulations_policies/orders_notices/.

4. Explanation of Policy Changes. This order provides interim guidance for the use of Fusion display mode at ZAN using Micro-EARTS for 5 NM Separation.

5. Responsibilities. The air traffic manager at ZAN must ensure the provisions of this order are briefed to all front-line managers, controllers-in-charge, and operational air traffic controllers prior to the effective date of this order, or prior to initial operational use of Fusion.

6. Procedures.

a. Fusion may be used to provide ATC services at ZAN using Micro-EARTS.

b. All procedures and requirements contained in FAA Order JO 7110.65 related to ATC services

provided to secondary radar targets apply to ATC services provided to Fusion targets.

c. Do not use Fusion targets for 3NM separation under the provisions of paragraph FAA Order JO

7110.65 5-5-4, MINIMA.

d. The term ‘TRK’ displayed in the Full Data Block (FDB) indicates that the aircraft does not

qualify for 5NM separation and a transition to procedural separation must begin while Fusion is enabled.

e. Controllers may display 0-60 track histories and specify the history interval while Fusion is

enabled.

f. The Limited Data Block (LDB) Aircraft Identifier (ID) will display Field 1 of the International

Civil Aviation Organization (ICAO) address if a valid beacon/4096 code is not received while Fusion is enabled.

Order JO 7110.120

August 06, 2015 JO 7110.120

g. The FDB will flash Call Sign Mis-match (displayed as ‘CSMM’) if the aircraft ID in the flight

plan does not match the non-blank reported Target ID received in the ADS-B message while Fusion is enabled.

h. The displayed ADS-B coast indicator in the FDB will be ‘ADB’ while Fusion is enabled.

7. Distribution. This Order is distributed to the ATO service units: System Operations Services, Air Traffic Services (ATS), Western ATS North, Safety Directorate, Air Traffic Safety Oversight Service (AOV), William J. Hughes Technical Center and Mike Monroney Aeronautical Center. 8. Background. Previous safety cases have been approved to support the use of fused surveillance sources in the Terminal and En Route environments for other ATC automation platforms. Safety Risk Management Document Automatic Dependent Surveillance-Broadcast (ADS-B) Microprocessor En Route Automated Radar Tracking System (Micro-EARTS) Fusion for 5nm Separation in Anchorage Air Route Traffic Control Center (ZAN) (SBS-066-01-20150413, v1.0, April 13, 2015) supports the display of a fused target for 5NM separation in ZAN. Furthermore, this safety case builds on the previous assessment for use of extrapolated surveillance sources in Anchorage on the MEARTS platform, Critical Services: En Route Air Traffic Control with Automatic Dependent Surveillance Broadcast (ADS-B) and the Microprocessor En Route Automated Radar Tracking System (MEARTS) SRMD, (SBS-033-01- 20100422, v1.0, April 22, 2010) along with the Safety Risk Management Document for Using WAM Sensors to Support the Provision of En route Services for Juneau Area, (SBS-028-01-20100111, v1.7, January 11, 2010).

9. Safety Risk Management. This order prescribes interim guidance for the use of Fusion displayed targets for a 5NM separation at ZAN. With the approval of the Safety Risk Management Document Automatic Dependent Surveillance-Broadcast (ADS-B) Microprocessor En Route Automated Radar Tracking System (Micro-EARTS) Fusion for 5nm Separation in Anchorage Air Route Traffic Control Center (ZAN) (SBS-066-01-20150413, v1.0, April 13, 2015), Fusion is approved for use at ZAN for 5NM separation.

Original s/ by Heather Hemdal

Heather Hemdal 08-04-2015 Director, Air Traffic Procedures, AJV-8 Air Traffic Organization Date Signed