Order JO 7000.5F Procedures for Submitting Changes to Air Traffic Control Publications
This document is cancelled. Cancelled by JO 7000.5G. Check the official source before relying on it.
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic…
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
Air Traffic Organization Policy Effective date:
ORDER JO 7000.5F
12/31/2020
SUBJ: Procedures for Submitting Changes to Air Traffic Control Publications
1. Purpose of This Order. This order establishes procedures for submitting changes to Air Traffic publications that are administered by the Air Traffic Organization (ATO), Mission Support Services Policy Directorate (AJV-P). This order outlines processes that Offices of Primary Responsibility (OPR) or their designated representatives must follow to ensure modifications are accurately and efficiently incorporated into the appropriate publication(s).
2. Audience. This order applies to agency personnel that support an OPR for the orders and directives listed in Appendix A and Appendix B.
3. Where to Find This Order. This order is available on the FAA website at https://faa.gov/air_traffic/publications and https://employees.faa.gov/tools_resources/orders_notices/.
4. What This Order Cancels. FAA Order JO 7000.5E, Procedures for Submitting Changes to Air Traffic Control Publications, dated September 8, 2017, is canceled.
5. Background. The Mission Support Services Policy Directorate supports the ATO and other entities by processing changes to be incorporated in the publications listed in Appendix A. These publicationsare updated and maintained by AJV-P and are made available electronically and some are widely distributed in print.
6. Explanation of Changes. This change reflects the functional realignment from AJV-8 to AJV-P, updates the email address for the Correspondence Mailbox, and removes the following three orders from Appendix B (AJI has retaken the responsibility for doing the updates to these directives):
a. FAA Order JO 7210.632 Air Traffic Organization Occurrence Reporting.
b. FAA Order JO 7210.633 Air Traffic Organization Quality Assurance Program.
c. FAA Order JO 7210.634 Air Traffic Organization (ATO) Quality Control.
7. Program Procedures. The following procedures must be followed to effect changes to the publications listed in Appendix A. In addition, AJV-P will assist OPRs and others to process numerous orders, as stipulated in Appendix B.
a. Submission Cutoff and Effective Dates.
(1) Publishing dates vary according to the publication.
(2) Refer to the cutoff dates as stipulated in the specific publication you intend to change.
Distribution Electronic Initiated By: AJV-P
The change must then be submitted via the AJV-P Correspondence Mailbox at 9 [email protected].
(3) Submit Publication-Ready Changes on or before the cutoff date for inclusion in the publication. A Publication Ready Change is one that meets the criteria highlighted in paragraph 7c (2) of this order.
(4) For orders/directives that are not on a normal publication cycle AJV-P will work with the OPR to meet a desired publication date.
b. Authorization for Submission.
(1) A publication’s OPR is authorized to submit changes to a publication. Editorial changes (such as misspelled words, typographical errors, changes in address, phone numbers, routing symbols, etc.) may be submitted by any organization.
(2) Changes to publications by an entity other than the OPR must first be coordinated and approved by the OPR.
NOTE− While existing orders pertaining to Directives Management (FAA Order JO 1320.1 and FAA Order JO 1320.62) only allow for the establishment of one OPR, the ATO recognizes there are numerous orders and manuals (for example FAA Order JO 7210.3, FAA Order JO 7340.2, Aeronautical Information Manual (AIM), Aeronautical Information Publication (AIP), all listed in Appendix A) where various FAA organizations are responsible for the content. Therefore, the term Content Owner is conceived to differentiate the responsibilities. For the purposes of this order only, a Content Owner is deemed to have the full authorization of an OPR to modify or revise sections of the above mentioned orders and manuals that pertain directly to their Line of Business.
c. Submit Changes/Material as Follows:
(1) With the exception of those Orders/Publications listed in Appendix B, all changes must
be submitted to the Correspondence Mailbox using the Document Change Proposal (DCP) template. (Refer to Appendix C, Document Change Proposal (DCP) Template, and Appendix D, Instructions for Completing a DCP.)
NOTE− A DCP is not required if the publication is being rewritten in its entirety. In such cases, submit the rewrite to the Correspondence Mailbox as a Word document. Afterwards, the Publications team will make the appropriate changes to the order.
(2) The AJV-P Publications Coordinator, a publications specialist within the Publications
and Administration Team, must receive the following documentation via the Correspondence Mailbox, for review, before changes will be submitted to the AJV-P Publicationsteam:
(a) Completed coordination with stakeholders (in accordance with FAA Order JO
1320.62) in the form of a signed ClearanceRecord.
(b) Appropriately coordinated and signed Safety Risk Management (SRM)
documentation.
(c) Final signed DCPs; send both Word document and PDF format copy of the DCP.
(3) In most cases, submit a separate, signed DCP for each paragraph that is to be changed. In
cases where a single change spans multiple paragraphs in the same Order, you may combine multiple paragraphs on one DCP form. If the submitted change alters the
naming/numbering convention of remaining paragraphs, indicate this information on the DCP. If the Index of a publication requires a change/deletion, also indicate this information on the DCP.
(4) An editorial change such as a misspelled word, typographical error, address change,
routing symbol change, new telephone number, etc., does not require a DCP. Due to the nature of the change, submit email requests directly to the Correspondence Mailbox.
(5) All graphics submitted for inclusion must be of high quality and in camera-ready form.
This means it is in the correct format and of good enough quality to be reproduced photographically onto a printing plate. Acceptable formats include: PDF, JPEG, TIFF, or BMP. The graphic must be submitted as a separate attachment, and should be embedded within the document if possible. Graphics may be submitted in color or black and white.
127(í In most cases, if you make a change to the AIM, you must also make a change to the AIP. The AIP is the international version of the [domestic] AIM and should be synched when possible. A separate DCP is required for each change.
8. Responsibilities. The processing, coordination, and publishing of DCPs are delegated to Mission Support Services Policy Directorate (AJV-P).
a. AJV-P must:
(1) Establish and maintain a process for submitting changes, updates, and material to the publications listed in Appendix A.
(2) Review incoming documentation to ensure that procedures are followed for efficient processing.
(3) Ensure submission complies with process requirements.
(4) Evaluate operational impact on other Air Traffic Control orders and other publications, like the AIM and AIP.
(5) Ensure the submitter is the publication’s OPR, or has the OPR’s approval for the change submitted.
(6) Ensure appropriate SMS documentation is provided.
(7) Return requests to the OPR that do not meet the procedures stated herein, with a clear statement of what is needed to process the changes.
(8) Provide the OPR with the draft layout for review prior to finalizing for print.
(9) Submit proposed change documents to FAA field facilities and other stakeholders for a 45-day comment/review period.
(10) Coordinate the printing and publishing efforts with the appropriate offices to ensure
timely publication of changes.
(11) Prepare applicable publications for printing and distribution by the Government Printing
Office. (12) Prepare and post a PDF version of publication(s) online in accordance with delivery
dates as stipulated in the specified orders. Based on those timelines, the publications can be accessed online at the following websites: https://faa.gov/air_traffic/publications and
https://employees.faa.gov/tools_resources/orders_notices/.
b. The Office of Primary Responsibility (OPR)must:
(1) Ensure all changes to publications are submitted in accordance with the procedures
specified in this order and Directives Management Orders FAA Order 1320.1 and FAA Order JO 1320.62.
(2) Notify Policy (AJV-P) of any change in OPRs. A change in OPR requires proper
collaboration and mutual concurrence amongst affected entities.
(3) Review all drafts to ensure that changes have been accurately captured and are presented
in the document as intended. During this phase the OPR must ensure that a thorough Plain Language Review is conducted in accordance with FAA Order JO 1320.62, Paragraph 4- 5, Preparing the Draft Directive.
(4) Provide concurrence within the timeframe designated. If you do not approve of the
presented layout, please send an email to the Correspondence Mailbox immediately with your non-concurrence and suggested change(s).
(5) Ensure SMS documentation is provided as stipulated in the current version of the ATO
SMS Manual, or in the SMS requirements for the OPR’s lines of business.
(6) Notify AJV-P1 which organizations to coordinate with on the proposed change by
checking the appropriate boxes on the Coordination Cover Sheet provided by AJV-P.
(7) Adjudicate all comments received from reviewers.
(8) Resolve any non-concurrences with contesting Subject Matter Expert or office.
(9) Ensure Union notification as applicable.
NOTE- The OPR has the responsibility of engaging any impacted union(s) as appropriate, based on any existing FAA agreements.
Digitally signed by KAREN L KAREN L CHIODINI Date: 2020.11.18 CHIODINI 15:28:07 -05'00' November 18, 2020 Karen Chiodini Date … Director (A), Policy, AJV-P Air Traffic Organization
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix A.
Appendix A
Appendix A. Publications for which Mission Support Services Policy Directorate
(AJV-P) has a Publications Requirement
x FAA Order JO 7110.10 Flight Services
x FAA Order JO 7110.65 Air Traffic Control
x FAA Order JO 7210.3 Facility Operations and Administration
x FAA Order JO 7340.2 Contractions
x FAA Order JO 7350.9 Location Identifiers
x FAA Order JO 7400.2 Procedures for Handling Airspace Matters
x FAA Order JO 7610.4 Special Operations
x FAA Order 7930.2 Notices to Airmen (NOTAM)
x AIM Aeronautical Information Manual
x AIP Aeronautical Information Publication United States of America
x P/CG Pilot/Controller Glossary
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix B.
Appendix B
Appendix B. Publications for which Mission Support Services Policy Directorate (AJV-P)
Provides Processing Assistance to Other Operational Service Units
1. Responsibilities:
a. In order to ensure consistency in the processing of Orders listed in this Appendix,
AJV-P1 agrees to provide the following services:
(1) Review and compare with other similar orders for consistency of language andformat.
(2) Evaluate any operational impact on other Air Traffic Orders andpublications.
(3) Submit the draft Order for coordination to those Lines of Business (LOB) the OPR has
identified.
(4) Validate stakeholder coordination list within 10 days of receipt of KSN notification.
(5) Forward all comments to the OPR for adjudication.
(6) Post and/or publish the Orderaccordingly.
b. The OPR retains the responsibilities and authority designated by FAA Order 1320.1
and FAA Order 1320.62. Also, the OPR has the responsibility of engaging any impacted Union(s) as appropriate, based on any existing FAA agreements.
2. Orders/Publications:
x x
x
ATO Terminal Automation Specialist Training Individual Performance Management (IPM) for Operational Personnel Identification and Notification of Differences between ATO Products and Services and ICAO Documents x x
FAA Order JO 7110.315 FAA Order JO 7210.57
Mobile Airport Traffic Control Tower Siting Criteria Traffic Counting, Reporting, and Processing for Determining Facility Classification Levels x FAA Order JO 7110.67 Air Traffic Management Security Services for Special Activities x FAA Order JO 7220.4 FAA Certification of Pilot Weather Briefing x FAA Order JO 7450.1 Special Use Airspace Management System
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix C. Document Change Proposal (DCP) Template
Appendix C
Appendix C. Document Change Proposal (DCP) Template
FIG C-1
Internal AJV-P source: https://ksn2.faa.gov/ajv/home/AJV-8/Shared%20Documents/Forms/AllItems.aspx
External source: https://ksn2.faa.gov/ajv/home/AJV-8/AJV8%20Guest%20Library/Forms/AllItems.aspx
- Docume:a•t Cil!lang,e PropM1111B,ri~1:11g :Sl!led
Onlm'Publ:i'cs:ffon:
Effetifin Da'fe: HQ, Clo:atro] Leadl'RIOu'img:
HQ, :Sp~oufing: - -
Fi-el'd orrroe Cil!l,11.111,ge lnimatm: - - L P:u:a,-grap lll -umber and Titre:
1_ R11.ck;~u11d : -
3- Empl!a:n;e:ffon o-fOhan,ge: -
4_ Ohange:
f" OLD f : \EW : : ~~ ' ~---------------------------------------------------1-_J … ~ : Sample tei,.-t:s2mple text :sample text 123456789 : : Sample text:rample tei,."t ~ample text 123456789 , L … : -- : … J
s;_ JindexOhan,ges: -
6.. Re-fen!lloe Ohanga:: -
7_ G-m plllicr: -
S.. GeiOV'No-fi'C-e: -
9_ :Sa.-fetiy ltis:t:: l'la.na,gement: (Ci!!.~ appropriate box).
:Sa.-fefy finding With H1WtnlS. m !:Ms &:~ O, a KAS chamge oc ex:i.;till!_g :;ai'ety :l<Slr;! fa 8:-§'..2;=,edi by Slll Slli [l>Sl!.:I., ar!.'Cil tt= [l>Sl!.:l rpero;!ives oc d':temtiJl$ tl!m l!!9zms ro-w.cil be i1!.ttoo1.ro;d oc tl!a! ssf;?ty mk C01llkll ~ (R_e:f,?£" to SMS :Mal!."ll:al., Sect:i.cm 5-4.3)
[:]J :Sa-fe~- Fmdillg WHl!louUlna:ros. Alli :Slli p;;m:l ilSE!S Sl!J Slli C?.'ooume!!.t to !efiect a safety
al!l!ll.~ tl!a! Vi'$ pei:f"oom.ed ibu.t di . 1!.'D'I ~ :n:=· ~ OC Sl!i!f rpero;!i"\l'ed OC cal.rul.atedi i=-- im :;ai'ety risk. ef,?[" to :SMS :t.la!!.-rral, ,SectiOlll 5.4_3).
-:o:Sa-fe~- Doc1n11en•tia'Ei'o11 Requ:iin!d_ Th-= propo;iedl chamge ~ ii! t m~ th': ~U:i=ts foc j)i!l±bml.m_g a S af;?ty .A1!>3l -i;, as hrie...,ll!li_gktecil illl th= ATO Safety Mam3~o-eme!!.t SFtem !.la!!.-rral, Paragraph 3 .2. L l'llote that eciiitorial aoo ad'm.illiistrati.V<2 clEJJ,_ge:. (i.e., y cllarl,_ges tihm oo l!.'Ot affect the! rnbs:tSl!.ti'R eleme!!.ts ofa~m ocsystem) oo l!:'OtB:tll!W.! SllL
IO.. ICAO lliffe:t'Ul,oes: Yes: [[J No [[J
u_
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix D. Instructions for Completing a DCP
Appendix D. Instructions for Completing a DCP
1. The DCP Template (ATO DCP Form 3101-01), highlighted in Appendix C, must be used for submitting changes to the following publications:
x FAA Order JO 7110.10 Flight Services x FAA Order JO 7110.65 Air Traffic Control x FAA Order JO 7210.3 Facility Operation and Administration x FAA Order JO 7610.4 Special Operations x FAA Order JO 7930.2 Notices to Airmen (NOTAM) (see exceptions at Appendix F) x AIM Aeronautical Information Manual x AIP Aeronautical Information Publication, United States
2. The most common mistakes that result in the delay of processing DCPs include:
a. Using an outdated version of the directive/Order being changed in the OLD column.
b. Not following the correct bolding and underlining guidelines in the OLD andNEW
columns.
c. Failing to capture the correct charts or graphs within thechange.
d. Having incomplete safety documentation completed.
3. Throughout the DCP template, there are gray boxes that contain drop-down lists. Click on each box to select the activity that best applies to your change request. The first box, below the title, contains three choices: INITIAL, FINAL DISPOSITION, FINAL DISPOSITION (INITIAL not required). Select one of these three options, depending on the requirements of the submitting entity.
ORDER/PUBLICATION: Order Number or Title of Publication (7110.65, AIM, etc.)
CHANGE: Select one of the following: Basic, Change 1, Change 2 or Change 3. For the AIP only, select Amendment 1, Amendment 2 or Amendment 3, whichever applies for the change cycle.
KSN TRACKING #: This is a KSN-generated number that the AJV-P1 specialist will populate.
EFFECTIVE DATE: This is the date when the change will be published based on the established publication schedule.
HQ CONTROL LEAD/ROUTING: The name, routing symbol, and telephone number of the responsible AJV-P1 manager is populated by the HQ specialist who prepares the form.
HQ SPECIALIST/ROUTING: The name, routing symbol, and telephone number of the responsible AJV-P1 specialist.
FIELD OFFICE CHANGE INITIATOR: The name, routing symbol, and telephone number of the person who is responsible for processing the change for his/her organization, working with the AJV-P specialist. For example, this person can be located at the FAA Washington HQ or in one of the Service Centers.
NOTE - Completion of the grayed out boxes is the same for the Control Lead, HQ Specialist, or Field Office Change Initiator. Insert the first and last name in the first box, the Routing Symbol in the second, and the 10 digits of their telephone number in the last three boxes.
1. PARAGRAPH NUMBER AND TITLE:
a. Enter paragraph number(s) in single digits, in the three boxes that are separated by
dashes, e.g., 3-4-5. Do not put three numbers in one block. The boxes will also accommodate paragraphs with double digits, e.g., 3-4-12. Exception: AIP and P/CG changes follow different formatting standards for this section; see FIG E-5 and FIG E-6. b. For convenience, the fourth box is programmed to default to all capital letters. Enter
the paragraph title in this box.
2. BACKGROUND: It is easy to get wordy in this section; however; this information will be included in the Order’s Briefing Guide, which explains the changes made to an order, where applicable. Therefore, descriptions must be factual and easy to understand. Enter aconcise yet thorough, statement that describes how and why the change is being made. Bear in mind that brevity should not leave the reader guessing about how the change evolved.
3. EXPLANATION OF CHANGE: Similar to the rule in the BACKGROUND, be factual and make the idea of the change stick in the reader’s mind. Enter a brief statement to explain the change; let it jump off the page, like an executive summary. This information will be included in the Explanation of Changes page as well. Do not simply state, “deleted paragraph d.” You must describe the content being deleted.
4. CHANGE:
a. The left column is labeled OLD and contains paragraphs/subparagraphs current at
the time of submission.
b. The right column is labeled NEW and contains the new, modified, or
added paragraphs/ subparagraphs.
c. Paragraph numbers and titles must be included beneath the headers labeled
OLD and NEW. Paragraph numbers and titles must be in bold print and titles must be CAPITALIZED. This is how the information is published in the orders.
d. Paragraphs and subparagraphs must be aligned and numbers and letters must bein
bold print. (e.g., a., 1., (a), (1))
e. If there is a deletion of any part of a paragraph, indicate this deletion by
underlining the words/text you wish to delete in the OLD column.
f. The new information in the right column must be underlined and in bold print.
g. List only those paragraphs that are modified, added, deleted or not changed
(see special circumstances).
(1) The statement No further changes to paragraph is automatically included at
the end of OLD/NEW section of the DCP to indicate as it states. For DCPs with multiple paragraphs, when you change the first few subparagraphs from a section but you do not amend the remainder of the paragraph, type the statement in both columns at the end of the applicable paragraphs. This tells the reader that you did not make any amendments to the remaining paragraphs in the affected order or publication.
(2) When you do not change the preceding subparagraph, but it is followed by
another paragraph that must be changed, insert or describe (“subparagraph b”) the unaffected subparagraph in the OLD column then type the phrase ‘No change’ in the NEW column. (See Page D-5). The ‘No change’ phrase is not underlined or bolded.
(3) Changes to Phraseology, Notes, Examples, and References must follow the
same format used for updating subparagraphs, with the appropriate font.
h. When it is necessary to delete an entire chapter—even if it creates a very
lengthy DCP-you must list and underline every paragraph, subparagraph, note, and reference of that chapter in the OLD column. Under the NEW column, type “Delete,” adjacent to the first line of every subparagraph that is being deleted. If the deleted chapter is being significantly rewritten, add the new paragraphs below the “Delete” instructions in NEW, with “Add” in the OLD column.
NOTE- Listing the entire contents of a chapter for deletion will result in lengthy DCPs; however, this is the required method that allows the history of the change to be documented.
i. When inserting Figures into DCPs:
(1) Place them within the body of the DCP template as appropriate.
(2) When the Figures or charts are too large for the available space, you are authorized to attach the figure or chart on a separate page with any relevant descriptions. In some cases, you may also add attachments to the DCP template to complete your work.
FIG D-1 Header and Paragraph Number
OLD NEW 1-1-1. GENERAL The paragraph number and title must always be typed in the OLD section at the beginning of every change.
1-1-1. GENERAL The paragraph number and title must always be typed in the NEW section at the beginning of every change.
FIG D-2 Modifying a Paragraph
OLD NEW c. This is how, what currently appears in the order/publication, an old subparagraph is to be shown in a Document Change Proposal.
c. This is how a new subparagraph is to be shown in a Document Change Proposal.
NOTE- Typically, if there is a term/phrase being added clarified, or if most of the original content is remaining in place in the same order, it is best to use the side-by-side (as shown above in the ‘Modifying a Paragraph’ example). This makes what is being changed much clearer for the reader. However, if subparagraphs are being re- ordered, most of the original content is NOT remaining, or the change is so complicated that the DCP becomes nearly unreadable, it might be better to Delete and Add entire paragraphs or even sections (as seen in example “Complete Paragraph Deletion and Rewrite”).
FIG D-3 Deleting Portions of a Paragraph/Subparagraph
OLD NEW d. If there is to be a deletion to a part of the paragraph, show it in this manner.
d. If there is to be a deletion, show it in this manner.
FIG D-4 Deleting a Subparagraph
OLD NEW e. If a subparagraph is to be deleted, show it in this manner
Delete
FIG D-5 Deleting an Entire Paragraph
OLD NEW
1-1-3. APPLICATION
a. If a paragraph is to be deleted, show it in this manner: insert Delete in the NEW column, across from the paragraph header and each ensuing subparagraph.
b. So this deleted subparagraph would also have a “Delete.”
Delete
Delete
Delete
--1 -
--
FIG D-6 Deleting an Entire Section or Chapter
OLD NEW 1-1-1. NAME OF FIRST PARAGRAPH
a. To delete an entire Section or Chapter, you must include every word of every paragraph being deleted, underline it, and write “Delete” across from it.
b. This might lead to a lengthy DCP.
1-1-2. NAME OF SECOND PARAGRAPH
a. Each subparagraph should have a “Delete”
Delete
Delete
Delete
Delete
Delete
FIG D-7 Renumbering Paragraphs
OLD NEW Paragraph 1-1-3 through 1-1-13 Renumber as 1-1-2 through 1-1-12
FIG D-8 Re-lettering Subparagraphs
OLD NEW Subparagraph f through j Re-letter as e through i
FIG D-9 Adding a New Paragraph or Subparagraph
OLD NEW Insert ‘Add’ in this column, across from a paragraph title,
paragraph, subparagraph, Note, or Reference. ‘Add’ is never underlined or bolded.
Add
1-1-2. APPLICATION
a. Insert a new paragraph like this. If you insert a new paragraph in the middle of a section, renumber the following paragraphs as shown in FIG D-8.
- - I
FIG D-10 Complete Paragraph Deletion and Rewrite
OLD NEW 4-5-6. NON-COMPLIANCE
a. Underline the entire paragraph when it must be deleted and replaced with new text, but you will maintain the same paragraph number.
Add
Add
Add
Delete
Delete
4-5-6. NON-COMPLIANCE
a. You must also type and underline the new change using bold print.
b. The new text doesn’t align well, so delete above and add the new paragraph below.
TBL D-1 Deleting Items within a Table or Figure
Prefix Branch Prefix Branch A U.S. Air Force A U.S. Air Force
C U.S. Coast Guard C U.S. Coast Guard G Air or Army National Guard G Air or Army National Guard
R U.S. Army R U.S. Army VM U.S. Marine Corps VM U.S. Marine Corps VV U.S. Navy VV U.S. Navy CFC Canadian Forces CFC Canadian Forces CTG Canadian Coast Guard Delete Delete
NOTE- When you are deleting an item within a Table or Figure that is exceedingly lengthy, you may include just the relevant portion in the DCP. If the Table or Figure fills an entire page and will not fit in the OLD or NEW sections of the DCP template, you must copy the Table or Figure onto a separate page. When this step is necessary, you must identify what is OLD and NEW in a heading. You must also underline the item to be deleted and enter the word Delete adjacent to it.
FIG D-11 Example 1: Using the No Change Option and the Deletion of a Single Word
OLD NEW íí'87<)$0,/,$5,=$7,21$1'7+( TRANSFER OF POSITION RESPONSIBILITY
íí'87<)$0,/,$5,=$7,21$1' THE TRANSFER OF POSITION RESPONSIBILITY
a. Air traffic managers must determine which sectors or positions require “duty familiarization” for each shift and must provide a facility directive which specifies all sources of operational information which must be read and/or discussed as a part of the familiarization. Familiarizations should be scheduled ZLWKLQDQíKRXUVKLIWWRWKHH[WHQWSRVVLEOH
b. Air traffic managers must determine which sectors or positions must maintain operational continuity through a transfer of position responsibility and must:
1. Review each sector or position and provide a tailored checklist which lists the equipment and the operational conditions which are likely to be a factor at that position. Checklists must be reviewed annually to ensure the sector/position checklist items are current.
No change
b. Air traffic managers must determine which positions must maintain operational continuity through a transfer of position responsibility and must:
1. Review each position and provide a tailored checklist which lists the equipment and the operational conditions which are likely to be a factor at that position. Checklists must be reviewed annually to ensure the position checklist items are current. No further changes to paragraph.
NOTE- 1. While the phrase is automatically included at the end of the last paragraph change on the DCP form, you may include ‘No further changes to paragraph’ under the OLD column and under the NEW column for any previous paragraph changes on the form for which it applies. 2. The boxes surrounding these examples are to differentiate the examples– there should not be boxes around the OLD and NEW columns on the DCP form.
FIG D-12 Example 2: How to Use the ‘No Change’ Option with a Description in OLD Column
OLD NEW 4-3-2. DEPARTURE CLEARANCES
Title through subparagraph d
c. Altitude. Use one of the following in the order of preference listed. Altitude may be omitted if the top altitude is published in the SID route description.
Subparagraph e1 through e3(b)
Add
4-3-2. DEPARTURE CLEARANCES
No change
c. Altitude. Use one of the following in the order of preference listed.
No change
4. When a SID does not contain published crossing restrictions and/or is a SID with a Radar Vector segment or a Radar Vector SID, or a SID is constructed with a Radar Vector segment and contains published crossing restrictions after the vector segment, instruct aircraft to “MAINTAIN (altitude).”
------------------------
FIG D-13 Including Notes and References in the Description and Adding a Figure
OLD NEW 3-9-6. SAME RUNWAY SEPARATION 3-9-6. SAME RUNWAY SEPARATION
Title through subparagraph d Reference No change
e. The minima in Para 5-5-4, Minima, e. The minima in Para 5-5-4, Minima, subparagraph subparagraph g, may be applied in lieu of the time g, may be applied in lieu of the time interval interval requirements in subparagraphs f and g. requirements in subparagraphs f, g, and h. When When Paragraph 5-5-4, Minima, is applied, ensure Paragraph 5-5-4, Minima, is applied, ensure that the that the appropriate radar separation exists at or appropriate radar separation exists at or prior to the time prior to the time an aircraft becomes airborne. an aircraft becomes airborne.
REFERENCE– Add
FAA Order 7210.3, Para 2–1–15, Authorization for Separation Services by Towers FAA Order 7210.3, Para 10–5–3, Functional Use of Certified Tower radar Displays
127(í 127(í 1. The pilot may request additional separation, but should The pilot may request additional separation, but should
make this request before taxiing on the runway. make this request before taxiing on the runway.
2. Takeoff clearance to the following aircraft should not be Add issued until the time interval has passed after the preceding aircraft begins takeoff roll.
f. Separate IFR/VFR aircraft taking off from the f. Separate aircraft taking off from the same runway same runway or a parallel runway separated by less or a parallel runway separated by less than 2,500 feet than 2,500 feet: (See FIG 3-9-4.):
Delete 127(í Takeoff clearance to the following aircraft should not be issued until the time interval has passed after the preceding aircraft begins takeoff roll.
No change Subparagraph f1 and f2
FIG 3-9-4 Add
Same Runway Separation Add
-- --
-
-
Departure Behind Departure Needs Wake Turbulence Separation
1 ➔ ~ ---}- ---P )
5. INDEX CHANGES: Identifies that terms should be revised, added, or deleted in the index. A “Yes” or “No” will suffice.
6. REFERENCE CHANGES: If this DCP is connected to more than one order and/or publication, please reference it here in the space provided. This section is used most often with the AIM and AIP since their data isparalleled.
7. GRAPHICS: Each graphic should be submitted as a separate file in any of the following acceptable formats: MS Word, PDF, JPEG, TIFF, or BMP. If the graphic fits in the DCP, it should be embedded as well as attached.
8. GENOT/NOTICE: If there is an associated GENOT/Notice specify it here, as well as the Noticenumber if known.
9. SAFETY RISK MANAGEMENT: Check the appropriate box in accordance with instructions in the Safety Management System Manual, Paragraph 3-2-1 and Paragraph 3-2-2.
10. ICAO DIFFERENCES:
a. The ATPS that is assigned the control must coordinate each DCP change with the AJV-P ICAO Differences Coordinator before the control is prepared for the Director. The ICAO Differences Coordinator is required to coordinate any differences with ATO International before they dispatch identified differences for posting in appropriate documents, per Articles 37 and 38 of theICAO Convention. All DCPs that require differences verification must be submitted in a timely manner to allow for the Director’s signature and to meet publications deadlines. b. The ICAO Differences Coordinator will certify the verification process by completing the Electronic Filing of Differences (EFOD) form.
11. The dropdown menu box contains the signature blocks of managers and directors. The signature authority should follow the requirements stipulated in FAA Order JO 1320.62, Paragraph 2-1.
a. Initial: For changes to orders for which AJV is not the OPR, AJV-P1 group managers may sign this block to release the DCP to the field for 45-day coordination.
b. Final Disposition/Final Disposition (Initial Not Required): The OPR (content owner) or Director responsible for the change must sign the Final DCP.
12. The last menu box is for the date. DCPs are dated at the time they are signed.
13. When completing a DCP with multiple paragraphs from the same order, use two line spaces between the paragraphs.
14. All DCPs must be prepared with Times New Roman using the following font types and sizes:
a. DCP: 11 pt, in regular text
b. REFERENCES: 8 pt, in Italics
c. NOTES: 10 pt, in Italics
d. EXAMPLES: 10 pt, in Italics
e. PHRASEOLOGY: 10 pt, in Italics
f. TEXT in Tables: For tabular data, use Arial and a font size between 8 pt and 10
pt that corresponds with the size of the table that must be published. NOTE- If the table is too small to be read, the publisher will increase the size of the tabular data so it is legible.
15. Next is the hierarchical format for numbering paragraphs and subparagraphs within DCPs and Orders. You must only have four levels in the paragraph breakdown structure. There is no waiver for using this format; therefore, you must organize your work to meet these requirements. This format also meets the mandate for Section 508 Compliance.
FIG D-14 Paragraph Formatting and Numbering for Standalone Orders
FIG D-15 Paragraph Formatting and Numbering for Cyclical Orders
(e.g., FAA Order JO 7110.65)
l. Example.
a. Another example
(1) Another exam.p e
(a) Anoili.er exam.ple
l-l-1. TITLE
a. Example
1. Another Examp e
(a), Another Example
,(1) Another Example
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix E. Sample of a Completed DCP
Appendix E
Appendix E. Sample of a Completed DCP
FIG E-1 Sample of a Completed DCP
Document Change Proposal/Briefing Sheet
INITIAL Order/Publication: 7110.65 Y KSN Tracking#: 9999
Change: 2
EITective Date: July 16, 2020
HQ Control Lead/Routing: Natking Estevez AJV-Pl (202) 267- 0859
HQ Specialist/Routing: Shawn Lovett AJV-Pl2 (202) 267- 0859
Field Office Change Initiator:
1. Paragraph umber and Title:
3- 6- 1. EQUIPMENT USAGE
3- 6-3. INFORMATIONUSAGE
3- 6-4. RADAR-ONLY MODE
3-6-5. SAFETY LOGIC ALERT RESPONSES
2. Background: The format below provides solid examples for completing a complex DCP. If you follow them and the previous rules your percentages of producing an impressive DCP will be very high. It is not uncommon to specify the approval authorities as well as decisions made via Working Groups. When you have multiple paragraphs in a single DCP, choose sentences or ideas from each to make the Background statement.
3. Explanation of Change: Begin change explanation with: "l11is change ... " Remember to make the reason for the change jump off the page. This technique will allow the reader to get an immediate understanding of the impact of the change, without searching for it.
4. Change: OLD
3-6-l. EQUIPMENT USAGE
a. The operational status of ASDE svstems must be determined during the relief briefing, or as soon as possible after assuming responsibility for the associated position.
!!a Use ASDE systems to augment visual observation of aircraft landing or departing, and aircraft or vehicular movements on runways and taxiways, or other parts of the movement area.
1. ASDE systems with safety logic must be operated continuously.
2. ASDE systems without safety logic must be operated:
ill} Continuously between sunset and sunrise.
ATO DCP FORM 3101~1 (04/22/19)
NEW Delete
Delete
Delete
Delete
Delete
Delete
Appendix E
FIG E-2
ill When visibility is less than the most distant point in the active movement area,
Q!
!£} When, in your judgment, its use will assist you in the performance of your duties at any time.
Paragraph 3-6-2.
3-6-J.. INFORMATION USAGE
Title through al Note
b, Position aircraft and vehicles using the movement area.
Subparagraph aJ_ through a§
No further changes to paragraph
Add
Add
3-6-4. SAFETY LOGIC ALERT RESPONSES
When the system generates an alert, the controller must immediately assess the situation visually and as presented on the ASDE system display, then take appropriate action as follows :
Add
a. When an arrival aircraft (still airborne, prior to the landing threshold) activates a warning alert, the controller must issue goaround instructions. (Exception: Alerts involving known formation flights, as they cross the
ATO D CP FORM3101-01 (04/22/19) 2
Delete
Delete
Renumber as 3-6-!
3-6-l_. INFORMATION USAGE
No Change
Delete
Renumber as subparagraph al_ through a~
No further changes to paragraph
3-6-3. RADAR-ONLY MODE
Radar-only mode is an enhancement of the ASDE-X and ASSC systems which allows the system to stay operational with safety logic
processing, despite a critical fault in the Multilateration <MLAT} subsystem. The system stays in full core alert status under radar-only mode without data block capability.
3-6-4. SAFETY LOGIC ALERT RESPONSE
Delete
After an alert is generated by the system. the controller must instantly evaluate the situation visually and as shown on the ASDE display. then take the following actions:
No Change
Appendix E
FIG E-3
landing threshold, may be disregarded if all other factors are acceptable.)
NOTE- ~nt of this paragraph is that an aircraft does not land on the nmway. on that approach. when the safe/:\1 logic system has generated a warning alert. A side-step maneuver or circle to land on another runway satisfies this requirement.
REFERENCE- FAAOJO 7JJ0.65 Para 3-8-1 Sequence/SpacingApplicaJion. FAAOJO JJ/065 Paml-9-6 SameR11nwqySerurntion FAAOJO 7110. 65 Para 3-10-3 Sm11e Runway Separation. PICG Tenn: Go Around
b. When two anival aircraft, or an anival aircraft and a departing aircraft activate an alert, the controller will issue go-around instructions Q! take appropriate action to ensure intersecting runway separation is maintained.
REfERENCE- FMO1O 71 JO. 65 Para. 3-9-8 Intersecting Runway/lnlersecling FlighJ PaJh OperaJions: FAAOJO JJJ0.65 Pa1n 3-10-4 lntersectingRumvay/Intersecting Flight Path Separaiion.
c. For other safety logic system alerts, issue instructions/clearances based on good judgment and evaluation of the situation at hand.
3-6-5. RADAR-ONLY MODE
Radar-only mode is an enhancement of the
ASDE-X and ASSC systems which allows the system to stay operational with safety logic processing, despite a critical fault in the Multilateration (Jv!LAT) subsvstem. The system stays in full core alert status under radar-only mode without data block capability.
Add
Add
Add
ATO DCPFORM 3101-01 (04/22/19) 3
Delete
Delete
b. When three anival aircraft, or an arrival and a departing aircraft activate an alert, the controller will take appropriate action to ensure intersecting runway separation is maintained.
Delete
No Change
Delete
Delete
3-6-5. EQUIPMENT USAGE
.!h The operational status of ASDE systems must be determined during the relief briefing, or as soon as possible a11:er assuming responsibility for the associated position.
.!h Use ASDE systems to augment visual observation of aircraft landing or departing, and aircraft or vehicular movements on runways and taxiways, or other parts of the movement area.
Appendix E
FIG E-4
Add
Add
Add
Add
Acid
.L. ASDE systems with safety logic must be operated continuously.
b ASDE svstems without safetv logic must be operated:
fl!l Continuously between sunset and sunrise.
i!!} When visibility is less than the most distant point in the active movement area, or
!£l When, in your judgment, its use will assist you in the performance of your duties at any time.
No further changes to paragraph.
5. Index Changes: No
6. Reference Changes: No
7. Graphics: No
8. Genot/Notice: No
9. Safety Risk Management: (Check appropriate box). D Safety Finding With Hazards. In this scenario, a NAS change or existing safety issue is assessed
by an SRM panel, and the panel perceives or determines that hazards could be introduced or that safety risk could increase. (Refer to SMS Manual, Section 5.4.3.) D Safety Finding Without Hazards. An SRM panel uses an SRM document to reflect a safety
analysis that was performed but did not reveal new hazards or any perceived or calculated increase in safety risk. (Refer to SMS Manual, Section 5.4.3.)
~ No Safety Documentation Required. The proposed change does not meet the requirements for
performing a Safety Analysis as highlighted in the A TO Safety Management System Manual, Paragraph 3.2.1. Note that editorial and administrative changes (i.e., any changes that do not affect the substantive elements of a procedure or system) do not require SRM.
10. ICAO Differences: Yes D No ~
Date:
ATO DCPFORM 3101-01 (04n2/19) 4
Appendix E
FIG E-5 AIP DCP Sample
NOTE- The first box is for the part of the AIP (GEN, ENR, or AD), the second box is for the section number, the third box is for the paragraph number, and the final box is for the paragraph title. Ensure the top level paragraph is being used, not a subparagraph.
FIG E-6 P/CG DCP Sample
NOTE- P/CG changes should list the section in the first box and the term in the last box. Due to the structure of the DCP template, there will be unsused boxes; a single space can be inserted into empty boxes to collapse them.
DocUD1ent Change Proposal/Briefing Sheet
Order/Publication: ~ 25th Edition
Effective Date: HQ Coo,trol Lead/R.ou ·
HQ Specialist/Routing: hawn Lov
Field Office Change Initiator: - - (L__j)
L Paragraph Number and Titl.e:
AR AGREEI\1ENT
ONDIRECTIONAL RADIO BEACON Q'-.IDB)
ORT LIGHTING AID
Document Change Proposal/Briefing Sheet
Order/Publication: ··~ Effective Date: HQ Control Lead/Routing:
HQ Specialist/Routing:: hawn Lov
Field Office Change Initiator: - - ,,__ _ _, l. Paragraph Number and Titl.e:
AR ENVlR.O:MEN'TI
!R--. ROTOR WASH
Appendix E
FIG E-7 Electronic Filing of Differences (EFOD) Form
Annex Standard or Reference Recommended Pmctice
Categories of Differences:
Differences to be Notified to ICAO (NAME OF ANNEX AND AMENDMENT NUMBER HERE)
United States
State Legislation, Level of Text of the difference to be Regulation or Document implementation notified to lCAO Reference ofSARP's
Category A - More exacting or exceeds !CAO SARP Category B - Different in character or other means of compliance Category C - Less protective, partially implemented / not implemented
Conuncnts including the reason for the difference
FAA Order JO 7000.5F, Procedures for Submitting Changes to Air Traffic… › Appendix F. Procedures for Orders/Publications that Do Not Require a DCP
Appendix F
Appendix F. Procedures for Orders/Publications that Do Not Require a DCP
1. FAA Order JO 7340.2, Contractions
a. Changes to Chapter 3, Sections 1 through 3, of this order are generated from Aeronautical
Information Services (AJV-A), which serves as the OPR. The following steps are then executed every cycle:
b. The AJV-P12 publisher initiates an email request to AJV-A for an update to FAA Order JO
7340.2 in advance of the cutoffdate.
c. Once the data run is complete and the files are available for download, the AJV-A
representative emails the location of the files to the AJV-P12publisher.
d. The AJV-P12 publisher copies the files and begins the formatting procedures.
NOTE- The AJV-P12 publisher is not responsible for the data provided and is solely responsible for formatting the contents received. However, errors in the data should be forwarded to the Correspondence Mailbox for resolution by AJV-A.
e. Changes to Chapter 2 and Chapter 3, Section 4, are sent via email directly to the AJV-
P12 publisher by the OPR on or before the cutoff date (as stipulated in FAA Order JO 7340.2) for timely inclusion in the publication. A cover letter and/or signed memorandum from the division level or above should also accompanysubmissions.
f. Changes to the remaining chapters within the order are submitted in accordance with
guidelines set forth in FAA Order JO 7000.5.
2. FAA Order JO 7350.9, Location Identifiers
All changes to this order are generated from AJV-A, which serves as OPR. The following steps are then executed every cycle:
a. The AJV-P12 publisher initiates an email request to AJV-A for an update to FAA Order
JO 7350.9 in advance of the cutoff date.
b. Once the data run is complete and the files are available for download, the AJV-
A representative emails the location of the files to the AJV-P12 publisher at 9- [email protected].
c. The AJV-P12 publisher copies the files and begins theformatting procedures.
NOTE- The AJV-P12 publisher is not responsible for the data provided. He or she is solely responsible for formatting the contents received. However, errors in the data should be forwarded to the Correspondence Mailbox for resolution by AJV-A.
3. Domestic Notices
a. Domestic Notices are special notices or notices containing graphics pertaining to almost
every aspect of aviation, such as military training areas, large scale sporting events, air show information, Special Management Programs (STMPs), and airport-specific information. They are published on the following website: https://www.faa.gov/air_traffic/publications/domesticnotices/.
Appendix F
b. Data in this section are updated continuously. All submissions for inclusion in this
section must have regional office approval and be submitted to AJV-P through the regional office. Submissions, as well as inquiries, should be addressed to 9-ATOR-HQ- [email protected].
c. Notices for events requiring Special Traffic Management Programs (STMP) should be
coordinated following the procedures in FAA Order JO 7210.3, Facility Operation and Administration.
d. Submissions should be sent to AJV-P well in advance of, but no later than, 28 days prior
to, the effective date of the Domestic Notices edition to ensure adequate lead-time for inclusion. Notices submitted for inclusion are published no earlier than two publication cycles (56 day periods) prior to the cycle in which the notice becomes effective. Special notices capture special events, like the Super Bowl, and are generally published on the Domestic Notices website for two consecutive publication cycles before their effective date. Notices that are more permanent in nature may be published until transferred to other appropriate Air Traffic Publications.
e. With the exception of dated special events, any notice submitted for inclusion must
include the following information at the end of the notice: submitting office and date of the submission (e.g., AJV-P, 10/10/2019). In addition, all electronic submissions should specify a time frame in which to expect the removal of the notice from the website. Regional offices should notify AJV-P12 when notices no longer need to be published.
f. Text files should be submitted as Word documents. Any graphics submitted for inclusion
must be of high quality; FAX copies will not be accepted. Graphics should be submitted in one of the following formats: GIF, JPEG, TIFF, BMP, or PDF. Please do not submit graphics with a “.doc” file extension. Each graphic must be submitted as a separate attachment. Graphic notices may be submitted in color or black and white. Avoid using white text in any graphic. Copyrighted materials, such as maps, should not be submitted for publication without written permission of the copyright owner.
4. International Notices
a. International Notices are notices containing flight prohibitions, potential hostile
situations, or other international/foreign oceanic airspace matters. Temporary data will be repeated in each issue until the condition ceases to exist. They are published on the following website: https://www.faa.gov/air_traffic/publications/internationalnotices/
b. 6XEPLVVLRQVVKRXOGEHVHQWWR$-9í3ZHOOLQDGYDQFHRIEXWQRODWHUWKDQGD\VSULRU
to, the effective date of the International Notices edition to ensure adequate lead-time for inclusion. Any notice submitted for inclusion must include the following information at WKHHQGRIWKHQRWLFHVXEPLWWLQJRIILFHDQGGDWHRIWKHUHYLVLRQHJ$-9í3 10/10/2019). In addition, all submissions should specify a time frame in which to expect the remRYDORIWKHQRWLFHIURPWKHSXEOLFDWLRQ6XEPLWWLQJRIILFHVVKRXOGQRWLI\$-9í3 when notices no longer need to be published.
c. Text files should be submitted as Word documents. Any graphics submitted for inclusion
must be of high quality; FAX copies will not be accepted. Electronic submissions are required and should be addressed to [email protected]. Graphics should be submitted in one of the following formats: GIF, JPEG, TIFF, BMP, or PDF. Please do not
Appendix F
submit graphics with a “.doc” file extension. Each graphic must be submitted as a separate attachment. Graphic notices may be submitted in color or black and white. Avoid using white text in any graphic. Copyrighted materials, such as maps, should not be submitted for publication without written permission of the copyright owner.
d. Permanent data will be carried until it is sufficiently published or is available in other
permanent sources.
5. FAA Order JO 7930.2, Notices to Airmen (NOTAM)
a. Due to the infrequent publishing schedule of this order, the quantity of changes received
for any one cycle from System Operations, Flight Services, U.S. NOTAM Governance and Operations, can be vast. In such cases, the consolidated submission will be treated as a rewrite, where the submission package is forwarded to the Correspondence Mailbox as a running Word document. b. In cases where less than 50 percent of the book is being changed, a DCP is the preferred
method of submitting change(s). If you are unsure of which method to use, please seek the counsel of AJV-P12 prior to submission. c. A cover letter and/or signed memorandum from the division level or above must
also accompany submissions.
6. Aeronautical Information Publication (AIP):
The AIP exists primarily to satisfy international requirements for the exchange of aeronautical information of a lasting character essential to air navigation. The AIP is prepared in accordance with the Standards and Recommended Practices of Doc 4444, Annex 15, Chapter 4. Changes to the AIP are coordinated and approved at the OPR level. Prior to submission for publication, the OPR must thoroughly review the material in order to make certain all necessary information has been included and that it is correct in detail. AJV-P is responsible for the consolidation and publication of the information submitted individually by each OPR.
a. General Section (GEN) 1.7, Differences from ICAO Standards, Recommended
Practices and Procedures
(1) GEN 1.7 is an exhaustive list (in tabular format) of differences from ICAO Standards,
Recommended Practices and Procedures. This section may be updated in its entirety to reconcile the information contained within the AIP with that of ICAO. To streamline the submission, it is better translated as a running Word document rather than parsed out as individual DCPs. The consolidated submission must be forwarded to the AJV-P Correspondence Mailbox.
(2) In cases where individual differences are updated, a DCP is the preferred method of
submitting change(s), but a completed Electronic Filing of Differences (EFOD) form will also be accepted.
(3) A cover letter and/or signed memorandum from the division level or above must also
accompany submissions.
b. Aerodromes Section (AD) 2, Aerodromes. Changes to AD 2 are generated from
Aeronautical Information Services (AJV-A), which serves as the OPR. The following steps are then executed every cycle:
Appendix F
(1) The AJV-P12 publisher initiates an email request to AJV-A for a new generation of
the AIP Aerodromes data in advance of the cutoff date.
(2) Once the data run is complete, the AJV-A representative emails the files to the AJV-
P12 publisher.
(3) The AJV-P12 publisher begins the formatting procedures.
NOTE- The AJV-P12 publisher is not responsible for the data provided and is solely responsible for formatting the contents received. However, errors in the data should be forwarded to the Correspondence Mailbox for resolution by AJV-A.
c. Appendix 1, ATS Routes. Changes to Appendix 1 are generated from AJV-A, which
serves as the OPR. The following steps are then executed at the end of each calendar year:
(1) The AJV-P12 publisher initiates an email request to AJV-A for a pdf copy of the
Minimum En Route IFR Altitudes Over Particular Routes and Intersections manual as soon as it is finalized for inclusion into the AIP.
(2) Once the manual is finalized, the AJV-A representative emails it to the AJV-P12
publisher.
7. FAA Order JO 7110.67, Air Traffic Management Security Services for Special Activities
a. System Operations Security (AJR-2) serves as OPR and generates changes to Appendices 1
and 2 of this Order. The changes are sent via email directly to the AJR-0 publisher by the OPR on or before the cutoff date for timely inclusion in the publication. A cover letter and/or signed memorandum from the division level or above should accompanysubmissions. b. Changes to other sections or paragraphs of the Order are submitted in accordance with
guidelines set forth in FAA Order JO 7000.5.
(1) The AJV-P12 publisher begins the formatting procedures and includes the data in the
next iteration of the AIP based on the Aeronautical Information Regulation and Control (AIRAC) schedule. NOTE- The AJV-P12 publisher is not responsible for the data provided and is solely responsible for formatting the contents received. However, errors in the data should be forwarded to the Correspondence Mailbox for resolution by AJV-A.