Radar Vectors
FAA Order Cancelled Issued Oct 1, 2019 AJI-2 72 pages Copy saved Nov 18, 2026

Order JO 3000.57A Air Traffic Organization Technical Operations Training and Personnel Certification

This order establishes the procedures and assigns responsibility for the administration of the Air Traffic Organization Technical Operations Training and Personnel Certification Program. General guidance is provided for the management, planning, conduct, and evaluation of the Technical Operations Training and Personnel Certification Program. This order ensures that personnel responsible for the establishment, installation, maintenance, second-level support, and certification of facilities used in the National Airspace System (NAS) are proficient in performing their assigned duties.

This document is cancelled. Cancelled by JO 3000.57B. Check the official source before relying on it.

Official source ↗ Open PDF

Distribution: Electronic Initiated By: AJI-2

ORDER

JO 3000.57A

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Air Traffic Organization Policy

SUBJ: Air Traffic Organization Technical Operations Training and Personnel Certification

This order establishes the procedures and assigns responsibility for the administration of the Air Traffic Organization Technical Operations Training and Personnel Certification Program. General guidance is provided for the management, planning, conduct, and evaluation of the Technical Operations Training and Personnel Certification Program. This order ensures that personnel responsible for the establishment, installation, maintenance, second-level support, and certification of facilities used in the National Airspace System (NAS) are proficient in performing their assigned duties.

Certification of the NAS system and services is an inherently governmental function. Through the Technical Operations Training and Personnel Certification Program, the Federal Aviation Administration grants certification to individuals who have attained a professional level and are responsible for the operation and performance of NAS facilities. The personnel certification process confirms that the individual possesses the requisite knowledge and skills to assume full responsibility for attesting to the operational status of a particular system, subsystem, or service. This level of achievement is demonstrated by attainment of certification authority as defined in this order.

Impacted personnel must comply with this order within 90 days of the effective date.

Glen A. Martin Vice President, Safety and Technical Training Air Traffic Organization

Effective Date:

10/01/2019

ii

Table of Contents

Chapter 1. General … 1-1

1-1 Purpose of This Order … 1-1 1-2 Audience … 1-1 1-3 Where This Order Can Be Found … 1-1 1-4 Cancellation … 1-1 1-5 Authority to Change This Order … 1-1 1-6 Air Traffic Safety Oversight … 1-1 1-7 Order Hierarchy … 1-1 1-8 Scope … 1-2 1-9 Explanation of Policy Changes … 1-2 1-10 Recommendations for Changes … 1-3 1-11 Related Publications … 1-3

Chapter 2. Program Administration Roles and Responsibilities … 2-1

2-1 General … 2-1 2-2 ATO Safety and Technical Training … 2-1 2-3 Technical Training … 2-1 2-4 Development and Curriculum Group … 2-1 2-5 Planning and Tools Group … 2-1 2-6 Training Policy and Programs Group … 2-1 2-7 Technical Operations Training Division … 2-2 2-8 Sponsoring Organization and Acquisition Authority … 2-2 2-9 Service Centers … 2-2 2-10 District Offices … 2-3 2-11 First-Level Manager … 2-4 2-12 Employees … 2-5

Chapter 3. Training Administration … 3-1

3-1 General … 3-1 3-2 Identifying Technical Operations Training Needs … 3-1 3-3 Quota Management … 3-2 3-4 Curriculum … 3-2 3-5 On-the-Job Training … 3-2 3-6 OJT Types … 3-3 3-7 Examinations … 3-5 3-8 Equivalencies … 3-7 3-9 Waivers … 3-7 3-10 Out-of-Agency Training … 3-7 3-11 Non-Contiguous Training Assignment … 3-7 3-12 Training Standards … 3-8

Chapter 4. Training Documentation and Outcomes … 4-1

iii

4-1 General … 4-1 4-2 Training Plan … 4-1 4-3 Pre-training Notification … 4-1 4-4 End-of-Course Evaluations … 4-1 4-5 Learning Histories in Electronic Learning Management System … 4-2 4-6 Completion without an FAA Number … 4-2 4-7 Training Outcomes … 4-2

Chapter 5. Personnel Certification Authority … 5-1

5-1 Personnel Certification Authority … 5-1 5-2 Individuals Requiring Certification Authority … 5-1 5-3 Sources for Certification Authority Requirements … 5-1 5-4 Use of Certification Authority in Other FAA Programs … 5-1 5-5 Documentation of Certification Authority … 5-1 5-6 Official Certification Record File … 5-3 5-7 Transfers and Retention of OCRFs … 5-4 5-8 Certification Authority Attainment … 5-4 5-9 Certification Authority Types … 5-5 5-10 Granting of Certification Authority in Emergencies … 5-6 5-11 Review of Certification Authority … 5-6 5-12 Certification Authority for New Systems … 5-6 5-13 Certification Authority Status … 5-7 5-14 Change in Certification Authority Status … 5-8 5-15 Changes to Existing Certification Authorities … 5-8 5-16 Modernizations and Equipment Replacement … 5-8 5-17 Certification Authority Review Program … 5-8 5-18 Test and Training Systems Used in the NAS during Emergencies … 5-8

Chapter 6. Files, Forms, and Records … 6-1

6-1 General … 6-1 6-2 Form and Record Correction Procedures … 6-1 6-3 Computer Security, Privacy, and Freedom of Information Act … 6-1 6-4 Automated Records … 6-1

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities … 7-1

7-1 General … 7-1 7-2 Responsibility for Non-Federal Facilities … 7-1 7-3 Non-Federal Use of FAA Theory Courses, Bypass Examinations, and Performance Examinations … 7-1 7-4 Training and Examination Requirements for Verification of Personnel Maintaining Non-Federal Facilities … 7-2 7-5 Effective Verification Date of Personnel Maintaining Non-Federal Facilities … 7-4 7-6 Verification Responsibilities, Process, and Records … 7-4 7-7 Training for Non-Federal Personnel … 7-5

iv

Appendix 1. Personnel Certification Authority Process … 1

Appendix 2. Site Familiarization … 1

Appendix 3. Non-Federal Personnel Verification Program … 1

Appendix 4. Written Formal Program … 1

Appendix 5. Air Traffic Organization Personnel Certification Requirements … 1

Appendix 6. Instructions for Accessing the FAA Information Superhighway for Training, the Comprehensive Management Resource Information System, and the Learning Management System … 1

Appendix 7. Record of Changes to Appendices 3 through 5 … 1

Appendix 8. Performance Examiner Requirements and Responsibilities … 1

Appendix 9. Call for Training … 1

Appendix 10. Quota Management Process … 1

Appendix 11. Academy Enrollment Process … 1

Appendix 12. Entering Completions in the Learning Management System … 1

Appendix 13. Established Equivalency Listings and Processes … 1

Appendix 14. Enhanced Hands-On Training and Demonstration of Proficiency … 1

Appendix 15. Certification Tracking System Review Process … 1

Appendix 16. Item Identifications—Numbering Scheme … 1

Appendix 17. On-the-Job Training Process … 1

Appendix 18. Acronyms … 1

Appendix 19. Definitions … 1

Appendix 20. Websites and Related Publications … 1

Chapter 1. General › 1-7 Order Hierarchy

Chapter 1. General

1-1 Purpose of This Order

This order specifies the policies necessary to implement and sustain the uniform national Technical Operations Training and Personnel Certification Program.

1-2 Audience

This order applies to all personnel involved in training and certification in the Air Traffic Organization (ATO), the Federal Aviation Administration (FAA) Logistics Center, the FAA Academy, and the FAA Technical Center. It is primarily concerned with employees maintaining the National Airspace System (NAS) but has facets for all personnel involved in the purchase, development, delivery, and revision of national operations, maintenance, and certification training. The Technical Operations Training and Personnel Certification Program only applies to FAA and non-federal technical specialists working in the NAS.

1-3 Where This Order Can Be Found

This order can be found at https://employees.faa.gov/tools_resources/orders_notices/.

1-4 Cancellation

This order cancels FAA Order 3000.57, Air Traffic Organization (ATO) Technical Operations Training and Personnel Certification Program, dated July 16, 2009.

1-5 Authority to Change This Order

The Vice President of Safety and Technical Training (AJI) has the authority to approve changes and revisions to this order. The Director of Technical Training (AJI-2) may cancel and replace procedural changes to appendices. Some appendices exist within the nationally approved software system and are updated on a periodic basis.

1-6 Air Traffic Safety Oversight

The Air Traffic Safety Oversight Service (AOV) has been given acceptance authority in accordance with the current versions of FAA Order 8000.90, Air Traffic Safety Oversight Credentialing and Control Tower Operator Certification Programs, and FAA Order JO 8000.97, Technical Operations Credentialing Program. After any changes to FAA Order JO 3000.57, not including changes to the appendices, are made and implemented, they must be submitted through AJI to the AOV for acceptance. In addition, any change to the Technical Operations Training and Personnel Certification Program requires a full safety risk management analysis in accordance with the current version of FAA Order JO 1000.37, Air Traffic Organization Safety Management System.

1-7 Order Hierarchy

Headquarters publications (both FAA-issued and FAA-adopted) take precedence over service area and local publications.

Chapter 1. General › 1-9 Explanation of Policy Changes

1-8 Scope

The Technical Operations Training and Personnel Certification Program has the following scope:

a. Philosophy. Training and personnel certification are the cornerstones of our maintenance program, business practices, and safety culture. The ATO Technical Operations Training and Certification Program equips the workforce with the required skills and knowledge. New and innovative delivery methods will be implemented to meet the increasing demands created by the evolving technologies and capabilities of the NAS.

b. Technical Competence. The Technical Operations Training and Personnel Certification Program must be conducted in a manner that allows employees to develop the necessary knowledge and skills to the depth and scope equal to the Technical Operations maintenance philosophy as defined in FAA Order 6000.30, National Airspace System Maintenance Policy.

c. Safety. All training curricula must meet or exceed the appropriate occupational safety and environmental regulations.

d. Personnel Certification Authority. This order provides national direction for the attainment and retention of personnel certification authority, not equipment certification. Certification authority enables employees to certify NAS systems, subsystems, equipment, and services.

e. Personnel Verification Authority. This order provides national direction for the attainment of personnel verification authority, not equipment verification.

1-9 Explanation of Policy Changes

This revised order involved a complete rewrite, removing some process components but retaining pertinent policy information. Policies common to both Air Traffic and Technical Operations training, such as instructional design, are moving to FAA Order JO 3000.22, Air Traffic Organization Technical Training Management. This revision also removes some policy information that is published elsewhere; consolidates and reorganizes remaining information; and updates references, hyperlinks, and chapter names. Significant policy changes include:

a. Combining Chapter 3, Training Administration, and Chapter 4, On-the-Job Training (OJT), Enhanced Hands-On Training (EHOT), and Demonstration of Proficiency (DoP) Administration

b. Removal of Appendix 1, Listing of Forms and Examples

c. Renaming and expansion of Appendix 2, Examples of Work Practices

d. Removal of Appendix 4, Instructional Hours for On-the-Job Training (OJT), as it is not the correct source for this information

e. Removal of Appendix 14, FAA Technical Operations Course Development Process, as it is covered by FAA Order JO 3000.22

Chapter 1. General › 1-11 Related Publications

f. Removal of Appendix 16, Collegiate Training Initiative (CTI) Program

g. Addition of Appendix 17, On-the-Job Training Process

h. Removal of clean testing requirements, as it was inconsistent with requirements of using technical documentation to perform job tasks

i. Removal of OJT waivers and experiential equivalency/waivers due to conflict with recurrent training requirement in FAA Order 6000.30, National Airspace System Maintenance Policy

j. Policy realignment of legacy EHOT/DoP format to better conform to OJT and Performance Exam requirements

k. Realignment or update of Roles and Responsibilities to better reflect FAA delegations of authority and mission expectations

l. Addition and definition of field-conducted training in paragraph 3.4.c.

m. Clarification of the use of OJT and Performance Exams for non-certifiable systems

n. Clarification of instructor qualifications

o. Addition of the definition of “lock-out” item in paragraph 3.7.d.(2)

p. Establishment of site familiarization as a requirement

q. Removal of policies covered by the Human Resources Policy Manual (HRPM), such as leave usage

r. Addition in paragraph 3.7.d. of a prohibition against stopping Performance Exams to avoid failures

s. Removal of proctoring policy, as it is covered by FAA Order JO 3000.22

t. Removal of paragraph 5-9, Converting Former Interim Certification Authorities, as this was accomplished by December 17, 2008

1-10 Recommendations for Changes

Users may submit recommendations for improvements to this order electronically. Comments may be submitted using the Directive Change Request (DCR) website located at https://technet.faa.gov/dcr/.

1-11 Related Publications

See Appendix 20, Websites and Related Publications.

Chapter 2. Program Administration Roles and Responsibilities › 2-6 Training Policy and Programs Group

Chapter 2. Program Administration Roles and Responsibilities

2-1 General

This chapter defines the roles and responsibilities for organizations and employees within the ATO Technical Operations Training and Personnel Certification Program.

2-2 ATO Safety and Technical Training

AJI is responsible for developing an integrated strategy to lead, direct, and guide the overall design, management, and delivery of technical training. AJI develops policies and standards for ATO technical training.

2-3 Technical Training

AJI-2 establishes and is responsible for the policy and oversight of all ATO national technical training for the ATO workforce.

2-4 Development and Curriculum Group

The Development and Curriculum Group (AJI-21) is responsible for training development policy and standards. AJI-21 maintains FAA Order JO 3000.22.

2-5 Planning and Tools Group

The Planning and Tools Group (AJI-22) is responsible for initiating and managing the Call for Training, quota management, validation of enrollment requests, and allocation of all Technical Operations training quotas.

2-6 Training Policy and Programs Group

The Training Policy and Programs Group (AJI-23) is responsible for the overall training requirements and the administration of training programs for Technical Operations personnel. The responsibilities of AJI-23 are as follows:

a. Manage the requirements for all training and training systems (software and hardware) for the Technical Operations workforce.

b. Solicit facility training best practices and conduct an annual review of this order, with stakeholder participation, no later than July 1 of each year.

c. Identify personnel certification requirements that support the systems, subsystems, or services in the NAS.

d. Provide standards and oversight for the evaluation of the Technical Operations Personnel Certification Program.

e. Manage and approve training identification and activation.

f. Manage and approve prerequisites.

Chapter 2. Program Administration Roles and Responsibilities › 2-9 Service Centers

g. Manage and approve operational necessity waivers.

h. Manage and approve all training equivalencies.

i. Maintain and update all appendices not specifically assigned to other organizations listed in this order.

2-7 Technical Operations Training Division

The Technical Operations Training Division (AMA-400) is the primary organization responsible for the delivery of initial and specialized national Technical Operations training. The responsibilities of AMA-400 are as follows:

a. Facilitate and manage the delivery of applicable technical Academy training.

(1) Distribute training materials, including examinations and surveys.

(2) Manage the environment and equipment for training delivered at the Academy.

(3) Coordinate the environment and equipment for Academy training delivered remotely.

(4) Enter training completions following Academy-delivered training (this is dependent on the training platform).

b. Ensure that instructors are properly qualified for their assigned duties.

c. Administer the Personnel Certification Program for Academy personnel.

d. Determine Academy training delivery capabilities in response to the Call for Training.

e. Manage, implement, and maintain the course critiques, questionnaires, and other survey materials and procedures for an Academy evaluation process.

f. Identify the need for course revisions or corrective actions to AJI-2.

g. Assist with curriculum development when requested by AJI-2.

2-8 Sponsoring Organization and Acquisition Authority

Sponsoring organizations and acquisition authorities (such as the Program Management Organization (AJM) and Technical Operations Services (AJW)) define requirements and identify a need for training, manage training acquisition and development, and perform revision and lifecycle management when applicable. Refer to the acquisition management policies at https://fast.faa.gov/ for further guidance.

2-9 Service Centers

The responsibilities of Service Centers are as follows:

Chapter 2. Program Administration Roles and Responsibilities › 2-10 District Offices

a. Recommend policies, standards, and procedures necessary for effective implementation of the national training program.

b. Review operational necessity requests for completeness and forward for approval.

c. Review individual equivalency requests and forward for approval.

d. Verify that employees receive training in accordance with this order.

e. Validate requests to access training software applications and forward to the appropriate managing office.

f. Review and validate Additional Quota Requests (AQRs) for approval.

g. Process quota movements within the service area of responsibility per Appendix 10, Quota Management Process.

h. Review non-contiguous training requests and forward for approval per Appendix 10, Quota Management Process.

i. Create vacancies in the Requirements Identification Tool (RIT).

j. Reserve quotas as placeholders in the Quota Management Tool (QMT) per Appendix 10, Quota Management Process.

k. Process retraining requests per Appendix 10, Quota Management Process.

l. Coordinate and distribute training quotas.

m. Ensure timely quota enrollment.

n. Ensure that completion data is entered into the Learning Management System (LMS) per Appendix 12, Entering Completions in the Learning Management System.

o. Act as the point of contact for the accountability of no-shows.

p. Participate in national training programs and workgroups.

q. Validate and approve or disapprove requests for Technical Operations training for personnel other than District or Operations Control Center (OCC) personnel as well as Technical Operations training for Engineering Services.

r. Develop and/or procure local training in accordance with the established standards and procedures defined in this order.

2-10 District Offices

The district offices are field-level organizations responsible for the maintenance and certification of the NAS.

Chapter 2. Program Administration Roles and Responsibilities › 2-11 First-Level Manager

a. The responsibilities of the second-level manager or anyone acting in that capacity with an official personnel action are as follows:

(1) Make the final determination of whether or not employees have demonstrated the minimum acceptable level of technical proficiency to perform actual duties.

(2) Grant, withhold, or revoke certification authority to employees in accordance with this order.

(3) Take action when employees fail to acquire or maintain a required certification authority.

(4) Provide oversight of the AOV Credentialing Program.

b. The Operations Support Staff (OSS) provides administrative support to the district offices. The responsibilities of the OSS are as follows:

(1) Manage the Technical Operations Training and Personnel Certification Program within their organizations, including, but not limited to, verifying that all prerequisite training, enrollment, and employee notifications are completed.

(2) Document the Personnel Certification Program.

(3) Assist in the oversight of the AOV Credentialing Program.

(4) Validate certification assignments in the approved logging system.

(5) Provide guidance on training and educational needs to employees and management. This can include research, data gathering or input, and validation.

(6) Recommend individual equivalencies and operational necessity waivers.

(7) Maintain training and certification records.

(8) Manage technical and nontechnical training quota allocation.

(9) Verify that completion data is recorded into the official training history.

(10) Document the Non-Federal Facilities and Personnel Verification Program.

(11) Support national training programs and workgroups.

2-11 First-Level Manager

The first-level manager supervises employees who require training and/or certification covered by this order. Within the Technical Operations Training and Personnel Certification Program, the responsibilities of the first-level manager are as follows:

a. Determine the technical training requirements necessary to maintain NAS operations.

Chapter 2. Program Administration Roles and Responsibilities › 2-12 Employees

b. Develop, update, and review a training plan for each employee.

c. Coordinate and establish each employee’s training schedule.

d. Select and approve employees for training.

e. Discuss and document pre-training notifications with employees.

f. Verify that all prerequisite training, enrollment, and employee notifications are completed.

g. Endorse employees for certification authority prior to it being granted.

h. Verify that all OJT and performance examination requirements are accomplished.

i. Complete the annual review of technical proficiency for each assigned employee with active certification authority, including their own.

j. Administer distance learning course examinations, if applicable.

k. Request, schedule, and administer bypass, OJT, and performance examinations.

l. Develop, approve, and implement action to be taken on potential or actual training failures.

2-12 Employees

Within the Technical Operations Training and Personnel Certification Program, the responsibilities of employees are as follows:

a. Apply themselves to the learning task in a professional manner and successfully complete training objectives within prescribed times.

b. Assist their first-level manager with identifying individual training needs, developing their training plan applicable to current job requirements, and maintaining proficiency on assigned systems and functions.

c. Provide training to other employees as assigned.

d. Participate in pre-training notification sessions.

e. Complete and submit all required course critiques and questionnaires and provide feedback to their first-level manager.

f. Participate in the ATO evaluation process.

Chapter 3. Training Administration › 3-2 Identifying Technical Operations Training Needs

Chapter 3. Training Administration

3-1 General

This chapter contains policies about needs identification and requirements identified by the FAA. The agency will make every effort to provide an environment that is conducive to the learning process. As new technology is implemented, additional training guidance will be provided.

3-2 Identifying Technical Operations Training Needs

The following contains the policies and definitions unique to Technical Operation requirements identification not already captured in the current version of FAA Order JO 3000.22. These policies must be implemented at every organizational level for efficient and orderly management of the Technical Operations Training and Personnel Certification Program:

a. Training restrictions enacted by Congress in 1996 prohibit agencies from spending appropriated funds on training that is offensive to federal employees or that is unnecessary in the execution of their duties. These restrictions apply to all federal employees. The HRPM, Volume 5, Talent Development System, includes the reference material listing these congressional training restrictions. The FAA uses Form 3000-20, ATO Group Training Needs Assessment, or Form 3000-22, ATO Individual Training Needs Assessment, to document that the training provided is appropriate and necessary to accomplish official duties in support of the FAA’s mission. For Environmental and Occupational Safety and Health (EOSH) elements, the ATO uses the EOSH Training Needs Assessment Tool (TNAT) to identify EOSH training requirements and needs.

b. The call for training is one of the formal processes the FAA uses to identify training needs. Refer to Appendix 9, Call for Training, for additional information.

c. Funding for training may be provided by the FAA and is subject to resource availability.

d. The target audience is identified, the quota is allocated to the target audience, and management selects the employees.

e. The nomination, selection, and approval of employees for training is a management responsibility. Selection and approval must take into consideration available resources, costeffectiveness, congressional training restrictions, legal requirements (e.g., safety or hazardous materials), current workload, training location, and maintenance responsibility. The selection of employees for training activities that primarily prepare for advancement and are not directly related to improving performance in employees’ current positions must conform to the appropriate collective bargaining unit agreement, Uniform Guidelines on Employee Selection Procedures, and the merit principles adopted in the FAA Personnel Management System.

Note: The term “requirement” in this paragraph refers to identified personnel in need of training. This is not to be confused with the use of “requirement” in the development of curriculum or acquisitions. The usage of the term “requirement” is contextually different.

3-3 Quota Management

Chapter 3. Training Administration › 3-5 On-the-Job Training

Quota management is an ongoing process to ensure the maximum use of allocated quotas. AJI-22 has the authority to manage, move, or remove quotas.

a. An emergency quota requirement is a request to meet an immediate need.

b. An unused quota is an approved, funded seat without an enrollment on the scheduled start date.

c. A no-show quota is an approved, funded seat with an enrollment but for which the employee does not show up.

d. Unused and no-show quotas should be avoided.

e. The quota management process is discussed in Appendix 10, Quota Management Process.

3-4 Curriculum

Technical Operations training is delivered through a structured curriculum designed to develop the specialized skills, knowledge, and abilities necessary for the performance of official duties. The curriculum may include one or more of the following:

a. Theory. Theory courses are conceptual or specific to a system. System-specific courses must include a troubleshooting process and must contain graded troubleshooting exercises.

b. Prerequisites. A prerequisite is a course that provides a common body of knowledge to a specific training assignment.

(1) Prerequisite requirements are accessible through the course profile located in the nationally approved application.

(2) If a prerequisite is not met, then a waiver might be granted, per paragraph 3.9, prior to attendance in the subsequent course.

(3) Employees who arrive for resident training and have not met the prerequisites or obtained an approved waiver must return to their duty location at the expense of their district or service area, as appropriate. The Service Center Training Program Management Officer (TPMO) must ensure that the travel is not funded out of centralized training funding.

c. Field-Conducted Training. Field-conducted training is formal training conducted at a NAS facility by either FAA or contracted personnel. It is planned, scheduled, and guided by a qualified employee.

3-5 On-the-Job Training

On-the-Job Training (OJT) is a hands-on activity used to develop the requisite skills and knowledge to perform work in the NAS. OJT will be conducted using a published, nationally developed course. In the absence of a nationally developed OJT course, a locally developed

course may be used. The OJT must include the performance examination that will be administered. OJT will be conducted with academic integrity.

Chapter 3. Training Administration › 3-6 OJT Types

a. OJT must be completed by employees when assigned, when they are preparing for certification authority, or when it is identified as part of a written formal program.

b. OJT must be conducted within the timeframe established in the training plan after successful completion of theory and before the performance exam, if applicable.

c. OJT completions must be recorded in the employee’s official learning history.

d. All national OJT courses contain the official number of hours of instructional and study time within the approved materials. The materials are accessed from the course profile. All OJT courses must include, but need not be limited to, the following subjects:

(1) Safety and Coordination. This must include all safety procedures and coordination for release of the system from the NAS.

(2) Test Equipment. This must include the use of test equipment for the measurement of all key performance parameters and certification parameters.

(3) System Interfaces. This must include the interface of this system with the NAS. This must also include identification of the applicable handbooks, standards and tolerances, maintenance schedules, certification parameters and procedures, and technical performance records and their use.

(4) System Operation. This must include system shutdown and startup procedures, but these do not have to be performed where operations will be affected. This may be done by discussion in the field. This must also include procedures needed to operate the system, including software installations and reloads.

(5) Preventive Maintenance. This must include all maintenance procedures for key performance parameters and all certification procedures. This should include all other maintenance procedures.

(6) Troubleshooting. This must include locating troubleshooting procedures in the respective manuals, performing all diagnostic tests, and identifying and locating the removal and replacement procedures in the applicable manuals. It may also include actual removal and replacement.

3-6 OJT Types

OJT is used to gain mastery over skills introduced in resident and distance learning. It may be employed whenever justified by the media analysis. OJT is a required component in attaining personnel certification authority. OJT must be conducted using maintenance handbooks and/or technical instruction books (TIBs).

a. Academy-Conducted OJT. OJT will be conducted by qualified personnel approved by the Academy. Academy-led OJT will include laboratory exercises.

(1) Site familiarization must be completed for location-specific elements that cannot be addressed at the Academy. These elements are detailed in Appendix 2, Site Familiarization.

(2) At the Academy or at a vendor site, a personnel certification for the instructor is not required, as these locations are not NAS operational and are not certified.

b. Field-Conducted OJT. OJT will be administered by qualified personnel. For certifiable systems, the instructor must be certified on the system, as these locations are NAS operational.

c. Preparing for OJT Conducted in the Field. The first-level manager and OJT instructor, with input from the employee, must develop a plan for how and when the OJT training will be administered. This plan must:

(1) Use the nationally approved OJT progress form, FAA Form 3400-16, On-the-Job Training (OJT) Progress Form for Certifiable Systems.

(2) Use a nationally approved OJT package, if available. When one is not published, use a locally developed OJT package.

(3) Determine if portions of a national OJT may be excluded.

(4) Determine the timeframe in which the OJT is to be completed. (The timeframes given in the OJT packages were developed for an employee with no previous experience.)

(5) Include the number of instructional hours.

d. Locally Developed OJT. A locally developed OJT course is used when a national course is not published. This course is normally developed by the OJT instructor but may be developed by a subject matter expert.

(1) Local OJT Development Process Requirements. Locally developed OJT must conform to the established OJT requirements listed in this order. A second-level manager or above should approve and set allowable timeframes for a locally developed course. The number of instructional hours for OJT varies by system but usually equals 1.5 times the performance examination hours. Locally developed OJT courses will be sent to AJI-2 for possible incorporation as national courses. Once a national OJT course is published, it supersedes all locally developed OJT courses for the particular system, subsystem, or service.

e. Enhanced Hands-On Training. EHOT contains the normal theory instruction and additional material to develop the skills and knowledge to maintain and certify a system, subsystem, or service. EHOT takes the place of both the theory and OJT requirements. It is followed by a DoP examination. Together, EHOT and DoP provide an alternative path to satisfy the theory, OJT, and performance examination, leading to attainment of personnel certification authority.

(1) Sunset Clause. EHOT courses will be separated into theory, OJT, and performance examination sections during a major revision. Refer to Appendix 14, Enhanced Hands-On Training and Demonstration of Proficiency, for additional information on EHOT.

3-7 Examinations

Examinations are used to measure and document an employee’s knowledge, cognitive ability, and performance of job skills and tasks. All examinations used in the Technical Operations Training and Personnel Certification Program must be developed and validated under the administrative control of AJI-23 and in accordance with applicable orders and standards. Examinations are subject to review and updates.

Chapter 3. Training Administration › 3-7 Examinations

a. Security of Examinations. Every employee is responsible for safeguarding the integrity of all controlled examinations. Any individual having personal knowledge of a compromise of any segment of an examination must immediately advise management of the incident.

b. Theory Examination Administration. First-level managers shall provide controlled examination material to employees in a non-operational environment free from distraction and interruption. Examination instructions will be discussed with the examinee prior to exam commencement. Employees will be considered to be in training status while taking an examination.

c. Demonstration of Proficiency. A DoP is given following successful completion of Academy or out-of-agency training (OAT) conducted as EHOT. Successful completion of the DoP satisfies a step toward attainment of personnel certification authority.

(1) Sunset Clause. DoPs will be converted to a performance examination during a major revision. Refer to Appendix 14, Enhanced Hands-On Training and Demonstration of Proficiency, for additional information on DoPs.

d. Performance Examinations. A performance examination measures the employee’s demonstrated proficiency of the training assignment being assessed. A performance examination is a required part of the process to attain personnel certification authority.

(1) If an FAA handbook with key and certification parameters has not been published, the available material must be used to develop the examination.

(2) An unsuccessful measurement or failure of a “lock-out” item, as designated by an asterisk (*) on the examination, will constitute failure of the entire examination. “Lock-out” items will include, but are not limited to, certification parameters, key performance parameters, and personnel safety practices.

(3) All performance examinations for certifiable systems, subsystems, or services must, at a minimum, test the employee’s ability to:

• Measure all key performance parameters. • Perform scheduled maintenance checks. • Perform system diagnostic tests. • Coordinate maintenance activities. • Demonstrate knowledge of standards and tolerances and system documentation. • Perform tasks related to a specific system.

(4) Performance examinations must be documented in the nationally approved software system.

(5) Employees must be advised that the examination is graded, and the examination must not be administered until employees successfully complete OJT.

(6) A performance examination must not be stopped to avoid a failure.

(7) The examiner may modify a performance examination to make it compatible with the actual system used. Any deviation must have approval of the second-level manager or above prior to the administration of the examination.

(8) Each national performance examination has an estimated time length. Time extensions require the verbal approval of a second-level manager or above and must be documented by the examiner on the performance examination cover sheet.

(9) The performance examiner cannot be the same individual who provided OJT instruction.

(10) All employees have access to the performance examinations on the FAA Information Superhighway for Training (FIST).

(11) Performance examinations are not limited to certifiable systems. They may be used whenever an assessment of performance proficiency is deemed to be necessary.

e. Nationally Published Performance Examinations. All nationally published performance examinations must be approved by AJI-23. The official hours can be found on the cover sheet of the exam. For Academy-administered examinations, items specific to individual NAS facilities will be covered during site familiarization.

f. Locally Developed Performance Examinations. If a national performance examination has not been published, the employee must satisfactorily complete a locally developed performance examination that is:

(1) Conducted by an authorized examiner

(2) In conformance with the established performance examination requirements

(3) Approved with a set allowable time by a second-level manager or above

(4) Submitted to AJI-2 for possible inclusion as a national examination

g. Bypass Examinations. Bypass examinations are comprehensive examinations used to indicate a knowledge level equivalent to that of a graduate of an appropriate formal training course. A bypass examination may be used to satisfy the theory requirement for certification authority. If an employee voluntarily uses the bypass examination as a first attempt and fails the examination, the failure does not count as one of the three official attempts and does not require a written formal program.

Chapter 3. Training Administration › 3-11 Non-Contiguous Training Assignment

3-8 Equivalencies

Equivalencies are a set of training courses that may be used in place of a specific training course. Academic equivalencies consist of two distinct types: those that are permanently defined and those that apply to an individual. The defined equivalencies are accessible through the course profile or crosswalk located in the nationally approved applications. The individual’s equivalency is based on an evaluation of the employee’s prior training that shows a level of knowledge comparable to that achieved by taking the course. Equivalencies that apply to an individual will not be granted for OJT, EHOT, DoP, performance examinations, or for a course that has a bypass examination. Requests for academic equivalencies will be submitted using FAA Form 3000-23, Training Equivalency Request. Additional guidance can be found in Appendix 13, Established Equivalency Listings and Processes.

3-9 Waivers

An operational necessity waiver is an exemption from a prerequisite requirement that allows the employee to attend a specific course scheduled offering. It is to be used only for emergency operational situations such as those that would result in a degradation of safety or significant additional expense if the training were not provided at that time. An approved operational necessity waiver must be submitted to the Service Center TPMO using FAA Form 3000-21, Operational Necessity Waiver. The approved waiver must be filed in the employee’s Official Certification Record File (OCRF). Refer to Appendix 10, Quota Management Process, for additional guidance.

a. An operational necessity waiver is requested by the first-level manager and approved by the second-level manager or above. If the employee successfully completes the course for which the prerequisite was waived, all reasonable efforts must be made to complete the prerequisite.

b. If an employee fails a course for which an operational necessity waiver has been granted, the prerequisite must be successfully completed before the employee retakes the failed course, or any other course for which that prerequisite is required.

c. Operational necessity waivers apply to an entire course.

3-10 Out-of-Agency Training

Out-of-agency training (OAT) is training that is conducted by or obtained from sources other than the FAA. This training must meet the same technical standards for training defined in this order. Refer to FAA Order JO 3000.22 for additional guidance.

3-11 Non-Contiguous Training Assignment

An employee may be enrolled in more than one scheduled offering at the FAA Academy without returning to his or her permanent duty station. When there is an intervening period between scheduled offerings, prior arrangements must be made to assign employees to supervised training or other work assignments during the intervening period. See Appendix 10, Figure 10-4, Overlapping, Consecutive, or Non-Contiguous Training, for process details.

Chapter 3. Training Administration › 3-12 Training Standards

3-12 Training Standards

Training standards encompass the eligibility requirements for training opportunities, employees’ expected conduct during training, the training environment, and the required qualifications for instructors. The following sections provide guidance on these topics.

a. Conduct during Training. Conduct issues while attending training must be resolved at the lowest level possible in accordance with the standards of conduct. If required, counseling must be conducted by FAA management. The training provider may return employees to their facility prior to completion of training after coordination with the field organization. Refer to the appropriate HRPM for further guidance.

b. Instructor Qualifications. At a minimum, instructors must have knowledge of the subject area and successfully complete the specific course(s) they are going to teach. All instructors are required to have EOSH training related to the equipment for which they are conducting training (e.g., Electrical Safety Qualified Person (ESQP) and Lock-Out Tag-Out (Hazardous Energy Control) for Authorized Employees). They must also meet these qualifications:

(1) Academy FAA Instructors. The basic requirement for Academy instructors is the successful completion of the agency’s Basic Instructor Training (BIT) course.

(2) Academy Contract Instructors. The basic requirement for Academy contract instructors assigned to duties as a classroom instructor is the successful completion of BIT.

(3) Field Instructors. The basic requirement for field instructors is the successful completion of the Facility Instructor Training (FIT) course.

(4) OAT Instructors. FAA-approved OAT instructors must meet the requirements as outlined in the applicable contract agreement.

(5) OJT Instructors. OJT instructors must hold valid certification authority on the applicable system, subsystem, or service. For non-certifiable situations, they must have demonstrated proficiency on the applicable equipment. OJT instructors are assigned by first-level management or above.

(6) Additional Skills. Different delivery media may require additional skills. Therefore, follow-on training may be required in order to maintain an effective level of instructional skill.

c. Performance Examiner Requirements. The following guidance applies to all performance examiners. Additional performance examiner responsibilities and instructions are listed in Appendix 8, Performance Examiner Requirements and Responsibilities:

(1) For certifiable systems, subsystems, and services, the performance examiner must possess certification authority for the system, subsystem, or service on which the examination is given. If the authority is inactive, they may administer the examination but may not perform system, subsystem, or service certification.

(2) The performance examiner must not administer performance examinations to his or her first-level manager.

d. Field Performance Examiner Requirements. The following additional guidance applies to performance examiners in the field.

(1) The field performance examiner must be assigned by a first-level manager or above and designated in the nationally approved software system.

(2) For the purposes of non-certifiable system examinations, the field performance examiner must be proficient on the system.

(3) The field performance examiner must not be an individual who was administered the same performance examination by the employee taking the performance examination.

(4) Field performance examiners who are external to the local organization are preferred.

(5) The field performance examiner must not be the individual who provided OJT to the employee.

e. Employees. The following guidance applies to all employees:

(1) Training Selection and Approval. The nomination, selection, and approval of employees for training is a management responsibility and must be accomplished through appropriate procedures in support of the organization’s mission.

(2) Leave while in a Training Status. Leave usage will be governed by the appropriate HRPM policy and/or collective bargaining agreement. Notification of absence should be given to the training provider as soon as it is practical.

(3) Personal Issues while in Training Status. If the employee encounters any issues that may affect their ability to learn while in the training environment, they should notify their instructor, Academy management, or immediate supervisor as appropriate.

Chapter 4. Training Documentation and Outcomes › 4-4 End-of-Course Evaluations

Chapter 4. Training Documentation and Outcomes

4-1 General

This chapter contains policies and requirements regarding training documentation and training outcomes. Training specialists must implement these policies for training outcomes at their organizational level to ensure that training opportunities are effectively used. Guidance related to training documentation can be found in the appropriate appendices.

4-2 Training Plan

Managers must develop a training plan with each employee requiring training. This plan must be tailored to each individual employee’s job requirements and may exist in both written and electronic formats. Create a training plan within 30 days of the employee reporting to the organization. The training plan must be reviewed with the employee annually and updated as required. This review must be documented on the training plan by having both the first-level manager and the employee sign and date the form.

a. A training plan must be part of any written formal program.

b. An employee’s LMS learning plan is part of an employee’s training plan but does not require signatures.

c. The initial training plan for employees must include the required new-hire training.

d. Training must be completed within timeframes defined in the plan.

e. Satisfactory training progress is required. Unsatisfactory conditions include:

(1) Failure to successfully complete any assigned training

(2) Failure to meet the time limits established in the training plan. The manager may extend the limits specified in the plan if completion is prevented by circumstances beyond the control of the employee.

f. Managers must monitor the progress of employees enrolled in training and must address unsatisfactory progress.

4-3 Pre-training Notification

Employees must receive advance notice of a training’s purpose, methods, and content. This notification must be documented on the nationally approved form and signed by the employee and his or her manager for all training. This form must be retained by the first-level manager for three years.

4-4 End-of-Course Evaluations

Every training event must use an end-of-course evaluation to assess participant reaction, instructor performance, learning outcomes, transfer of learning, and the effectiveness of participatory learning techniques. It must be provided to the employee. The employee’s

completion of the end-of-course evaluation is required. In accordance with FAA Order 1350.14, Records Management, the completed end-of-course evaluation must be retained by the training provider. Further guidance may be found in FAA Order JO 3000.22 and the HRPM, Volume 5.

Chapter 4. Training Documentation and Outcomes › 4-7 Training Outcomes

4-5 Learning Histories in Electronic Learning Management System

All approved training activities must be recorded with the appropriate completion status in the employee’s official learning history in the LMS. Employees must have access to their official learning histories.

4-6 Completion without an FAA Number

When employees attend required training that does not have an FAA course number, they must provide the training specialist with documentation of course attendance. This may be a transcript, a completion certificate, or another similar official proof of attendance. These courses must be recorded in the employee’s LMS learning history. For LMS process guidance, see Appendix 12, Entering Completions in the Learning Management System.

4-7 Training Outcomes

A successful training program will be defined by the following: effective needs identification, appropriate training methods, the roles and responsibilities of the training community, and efficient records management. Measuring training outcomes requires a review and validation as outlined in FAA Order JO 3000.22.

a. Satisfactory completion occurs by meeting the objectives and outcomes of the learning assignments. Successfully completed learning assignments must be documented as “PASS” for graded materials or as “COMP” for non-graded materials. The following requirements apply unless the employee is exempted elsewhere in this order:

(1) Grading. Employees must receive a cumulative 70% or better on graded examinations and a passing grade on pass/fail examinations. For courses with more than four graded examinations, a passing grade is required in at least 50% of the examinations.

(2) Attendance. To receive maximum benefit from training, an employee should be present for the entire course. Leave must be approved by the employee’s manager of record. Notification of absence must be communicated to the training provider.

b. Unsatisfactory completion is a failure to meet the objectives and outcomes of the learning assignments and must be documented as a “FAIL” in the employee’s learning history.

(1) Notification of the Employee’s Manager. If the employee fails the training, the training provider must notify the Service Center TPMO. The TPMO will notify the employee’s manager.

(2) Establishment of a Written Formal Program. Unless exempted elsewhere, employees who fail assigned training, bypass examinations, OJT, or performance examinations must be provided a written formal program for remediation by the first-level manager within 30 days of the failure. A written formal program must also be implemented when certification authority has

been revoked due to lack of proficiency and when management has determined that the individual needs to regain the revoked authority. Satisfactory progress is determined by the employee successfully meeting all of the requirements outlined in the written formal program.

(3) Retakes of Training or Bypass Examinations. A minimum of 30 days is required between attempts to retake a failed training event. The 30-day minimum may be waived by the second-level manager or above. Only three attempts are allowed to satisfy a training requirement, with noted exception in paragraph 3.7.g. The second-level manager or above will authorize the third and final attempt. Copies of all authorizations for Academy-delivered training or examinations must be sent to AMA-400.

(4) Funding of Travel and Per Diem for Multiple Attempts. The employee’s organization must fund the travel and per diem costs that are incurred when the employee takes multiple attempts to satisfactorily complete a training course or examination.

(5) Documentation of Reasons for Performance Examination Failures. When an employee fails a performance examination, the examiner must clearly list the reasons for failure on the reverse side of FAA Form 3400-15, Performance Examination Cover Sheet. The failure will be recorded in the employee’s official training history in the LMS.

c. Incomplete. This entry is made for any employee whose circumstances are not covered under the guidelines for withdrawal, successful completion, or failure.

d. Withdrawal. With prior management approval, an employee may depart from training in the event of an emergency or another unusual circumstance. The employee’s manager must notify the training provider of the departure. When an employee withdraws from a training course, a grade of “WITH” must be entered for that course in the employee’s official LMS learning history. Withdrawals will not be used for the purpose of avoiding failure of the course.

e. Early Release. When the training provider determines that an individual employee or entire class has satisfied the course completion requirements or has failed the course prior to the established class end date, early release may be granted. When any of these situations occurs, the training provider will complete an early release form and will be responsible for notifying the employees’ managers and AJI-23.

Chapter 5. Personnel Certification Authority › 5-5 Documentation of Certification Authority

Chapter 5. Personnel Certification Authority

5-1 Personnel Certification Authority

This chapter provides national direction for the attainment and retention of personnel certification authority. Employees must possess the minimum competencies necessary to certify a given type of system, subsystem, or service. Certification authority imparts to the holder all rights and responsibilities for independent determination to keep, remove, or place a certifiable element into operation in the NAS. Certification authority must be documented in the nationally approved software system in accordance with this order.

5-2 Individuals Requiring Certification Authority

Only FAA employees may be granted certification authority. FAA individuals required to hold certification authority for systems, subsystems, or services are identified as follows:

• All employees that certify systems, subsystems, or services • Performance examiners • DoP examiners • OJT instructors conducting OJT on a certifiable system

5-3 Sources for Certification Authority Requirements

Personnel certification requirements are published in Appendix 5, Air Traffic Organization Personnel Certification Requirements, which include specific criteria such as theory, OJT, and performance examinations or equivalent for attainment of certification authority. FAA Order 6000.15, General Maintenance Handbook for National Airspace System (NAS) Facilities, defines certification requirements based on the system(s), subsystem(s), and service(s) requiring certification.

5-4 Use of Certification Authority in Other FAA Programs

FAA personnel with appropriate user rights and responsibilities must update an employee’s certification authorization records in the FAA logging system and the AOV credentialing system after any change to a personnel certification authority status.

5-5 Documentation of Certification Authority

Certification authority must be documented on FAA Form 3400-3, Technical Operations Personnel Certification/Verification Authority Record, in the nationally approved software system. Additional guidance specific to the documentation of the certification authority record can be found in Appendix 1, Personnel Certification Authority Process.

a. Certification authority must be documented on FAA Form 3400-3 in the nationally approved software system. The information in each certification authority record must include, but is not limited to, the following:

(1) Facility type (FAC)

(2) Facility Identification Code (FIC), as appropriate

(3) All certification authorities

(4) Theory qualification(s) that support each certification authority, with date of completion

(5) OJT qualification(s) that support each certification authority, with date of completion. The name of the OJT instructor must be entered in the OJT Remarks block. If OJT was satisfied by EHOT, the instructor name is not required.

(6) Performance qualification(s) that support each certification authority, with date of completion. The name of the examiner must be entered in the Performance Qualifying Remarks block. If performance qualification(s) were completed via DoP, the examiner name is not required. Other information that may be entered in the Performance Qualifying Remarks block includes the time used for the exam and the score.

(7) The name and date of the employee making the entries

(8) Comments regarding the certification authority entry in the Comments block

(9) The name of the first-level manager making the endorsement and the date

(10) The name of the second-level manager granting the certification and the date granted

(11) The name of the second-level manager revoking a certification authority and the date revoked

b. Changes to existing certification authority records because of a new FAC, FIC, or certification requirements require that a new certification authority record be created. All fields in the new record in the nationally approved software system must be completed as though it was the original record.

c. Certification authorities entered on FAA Form 3400-3 prior to January 1, 1998, are considered valid and do not require correction. Certification authorities entered on FAA Form 3400-3 prior to March 5, 2002, do not need dates or course information for OJT because entries on OJT were not required prior to that date.

d. Legacy Records. Certification authority records that pre-date September 17, 2007—the implementation date of the Certification Tracking System that contained the electronic signature of the grantor—were to have been entered into the nationally approved automated system by December 31, 2008, per the previous version of this order. Any of these FAA Form 3400-3 paper records, kept for historical purposes, are not official and must not be used for documentation of personnel certification authority. Secure handling must be in accordance with FAA Order 1350.14 and FAA Order 1370.121, FAA Information Security and Privacy Program & Policy, for materials containing personally identifiable information.

Chapter 5. Personnel Certification Authority › 5-6 Official Certification Record File

5-6 Official Certification Record File

Each employee who holds personnel certification authority of any status must have an Official Certification Record File (OCRF). The OCRF consists of both paper records and electronic records. The electronic records are in the LMS and other nationally approved software system(s). The file must contain documentation to substantiate the employee’s qualifications to possess certification authority on a specific system, subsystem, or service. Printed copies of electronic records may be made for local reference.

a. FAA Form 3400-3. The official FAA Form 3400-3 resides in the nationally approved software system and is considered part of the employee’s OCRF. The nationally approved software system must populate the data entry as much as possible, including automatically sending an email notification of pending actions. The form must be used to record the certification authority status.

b. Legacy Signed FAA Form 3400-3. Information from FAA Form 3400-3 for certification authorities granted prior to September 17, 2007, has been transferred to the nationally approved software system.

c. LMS is Part of OCRF. The official training history for those courses, and for examinations that support a certification authority, is located in the LMS and is considered part of the individual’s OCRF. Some of the examinations completed prior to the October 1, 2005, implementation of the LMS may not be recorded in the LMS; paper records of those examinations are filed in the OCRF. Those prior completions are recorded in FAA Form 3400-3 in the nationally approved software system and do not need to be added to the LMS.

d. FAA Form 3400-16. FAA Form 3400-16 is originated in the nationally approved software system and then printed for use. There is no requirement to file the OJT package. FAA Form 3400-16 for successfully completed OJT can be disposed of 24 hours after the completion has been entered in the LMS and the certification authority has been granted. FAA Form 3400-16 for a failed OJT package must be filed in the employee’s OCRF until the OJT package is successfully completed and certification authority has been granted.

e. FAA Form 3400-15. FAA Form 3400-15 for both nationally and locally developed performance examinations is originated in the nationally approved software system and then printed for use. The nationally approved software system must populate the data entry as much as possible, including automatically sending an email notification of pending actions. The cover sheets for successfully completed nationally developed performance examinations can be disposed of 24 hours after the completion has been entered in the LMS and the certification authority has been granted. FAA Form 3400-15 for a failed performance examination must be filed in the employee’s OCRF until the performance examination is successfully completed and the certification authority has been granted. There is no requirement to file the body of the examination.

f. Certification Authority Status Change. Recommendations to change certification authority status are filed in the OCRF. These are done via email.

Chapter 5. Personnel Certification Authority › 5-8 Certification Authority Attainment

g. Other Documents as Needed. There may be other documents filed in the OCRF that are not already included in the LMS.

5-7 Transfers and Retention of OCRFs

An employee’s training file or OCRF must be maintained in accordance with the current version of FAA Order 1350.14. The processes for transfers and retentions are as follows:

a. When an employee is reassigned to another location or another FAA office, the training file or OCRF must be transferred by traceable delivery service or by messenger to the employee’s new location or office within 30 days.

b. Once an employee has left the FAA or an employee has transferred to a position where he or she no longer needs personnel certification authority, the training file or OCRF must be processed as follows:

(1) The file must be transferred by traceable delivery service or by messenger to the Service Center TPMO, who holds it for five years.

(2) The file must then be sent by traceable delivery service or by messenger to the Federal Records Center for another five years. It must then be provided to the National Archives and Records Administration (NARA). If the NARA does not want the file, it is then destroyed.

5-8 Certification Authority Attainment

Attainment of certification is a six-step process. Individuals successfully completing a theory requirement with the intention of attaining certification authority should be granted that authority within 180 days.

a. Theory Requirement. The first step of the personnel certification authority process is the theory requirement. Successful completion will affirm that the individual possesses satisfactory knowledge of the system, subsystem, or service. The current applicable theory requirement is listed in Appendix 5, Air Traffic Organization Personnel Certification Requirements.

b. OJT Requirements. The second step of the personnel certification authority process is OJT. The current applicable requirement for OJT is listed in Appendix 5, Air Traffic Organization Personnel Certification Requirements.

c. Performance Examination Requirements. The third step of the personnel certification authority process requires successful completion of a performance examination. The current applicable requirement for a performance examination is listed in Appendix 5, Air Traffic Organization Personnel Certification Requirements.

d. Validation. The fourth step of the personnel certification authority process is the training specialist’s validation that the certification requirements have been met and that a certification record has been created.

Chapter 5. Personnel Certification Authority › 5-9 Certification Authority Types

e. Endorsement. The fifth step in the personnel certification authority process is an endorsement from the first-level manager after confirming the specialist’s knowledge of site familiarity and capability to perform work practices. This endorsement is documented in the nationally approved software system.

f. Granting. The sixth step in the personnel certification authority process is the reviewing and granting from the second-level manager or above. Granting of certification authority is documented in the nationally approved software system.

5-9 Certification Authority Types

There are three types of certification authority:

a. Regular Certification Authority. Regular certification authority on a system, subsystem, or service may be granted to an employee after satisfactory completion of the certification requirements identified in Appendix 5, Air Traffic Organization Personnel Certification Requirements.

b. Temporary Certification Authority. Temporary certification authority may be granted on a specific type of system, subsystem, or service based on a determination of operational need during unusual circumstances. This authority is valid for up to 90 days from granting and must not be granted to the same individual for more than 6 months within any 12-month period on the same system, subsystem, or service. The granting of temporary certification authority must be fully and formally documented in the nationally approved software system. The following criteria must also be met to grant temporary certification:

(1) When granting temporary certification authority to an individual, consideration should be given in the following sequence:

(a) Individuals who have met the applicable theory requirements

(b) Individuals who have not met the applicable theory requirements but have met training requirements for related systems (e.g., an employee certified on FA-9639 Distance Measuring Equipment (DME) may be granted temporary certification authority for FA-9783 DME; however, training on communications equipment cannot be considered applicable to DME).

(2) Temporary certification authority must not be granted to employees who, on the last attempt, failed the theory requirement, OJT requirement, or performance requirement for the pertinent system, subsystem, or service.

c. Remote Regular Certification Authority. Remote regular certification authority on a system, subsystem, or service may be granted to employees who are responsible for accomplishing remote certifications through the use of Remote Maintenance Monitoring (RMM) equipment and capabilities.

Chapter 5. Personnel Certification Authority › 5-12 Certification Authority for New Systems

(1) In order to gain remote regular certification authority, the employee must satisfy the approved remote operations, OJT or EHOT, and DoP or performance examination requirements, as shown in Appendix 5, Air Traffic Organization Personnel Certification Requirements.

(2) Employees who have regular certification authority for a system, subsystem, or service that has RMM capabilities are not required to attain remote regular certification authority.

5-10 Granting of Certification Authority in Emergencies

Provided that the requirements for the type of authority granted are met, the second-level manager or above may grant emergency certification authority through the most expedient means (e.g., electronic communication or telephone). This must be done in accordance with paragraph 5.9.b., Temporary Certification Authority. This action must be followed up within three business days with the appropriate documentation.

5-11 Review of Certification Authority

On an annual basis, the first-level manager must review the proficiency of each employee, and the second-level manager must confirm the review.

a. Frontline Review of Certification Authority. The first-level manager and the employee must verify proficiency as long as the certification authority is active. The first-level manager must perform a proficiency review of active certification authorities, including his or her own, annually (no more than 13 months after the previous review) or whenever a question arises concerning the individual’s technical proficiency. The first-level manager must document the review in the nationally approved software system.

(1) The review of an employee may be an examination of his or her ability to perform designated procedures and adjustments or an observation of on-the-job performance. The observation of on-the-job performance must include a review of site conditions, restoration activities, air traffic reports, maintenance logs, and other information gathered during normal execution of the manager’s duties throughout the year. The documentation in the nationally approved software system must include the following statement: “Airway transportation system specialist (ATSS) proficient for all active certification authorities.”

(2) The first-level manager documents the review on his or her own active certification authority in the nationally approved software system with the following statement: “I manage employees with active certification authorities.”

b. Second-Level Review of Certification Authority. The second-level manager or above confirms the manager’s review and recommendation. This review must be documented in the nationally approved software system with the following statement: “All active certification authorities confirmed.”

5-12 Certification Authority for New Systems

When new systems are installed, there are two methods for beginning the process to attain certification authority:

Chapter 5. Personnel Certification Authority › 5-13 Certification Authority Status

a. Temporary Certification Authority for New Systems. Temporary certification authority may be granted to employees in accordance with paragraph 5.9.b. Those employees then administer the OJT and performance examinations to other employees. The individuals with temporary certification authority attain regular certification authority by receiving the OJT and performance examinations from individuals who they did not train or examine.

b. Three or More Years of Experience on Similar Systems. This method applies only to those new systems that have a nationally approved theory course. Each second-level manager within the district may grant regular certification authority for up to two employees in his or her organization. Regular certification authority may be granted if the employee has completed the nationally approved theory course and has three or more years of experience as a certified employee on a similar system. The designated employee(s) would then administer the OJT and performance examinations to other employees.

5-13 Certification Authority Status

A certification authority must have one of three statuses: active, inactive, or revoked. During the annual review of each specialist’s records, the first-level manager must determine if any of the certification authorities should change status.

a. Active Certification Authority. Active certification authority attests to the employee’s proficiency on a system, subsystem, or service. Specialists with active certification authority must have a corresponding AOV credential.

b. Inactive Certification Authority. Inactive certification authority must be documented in the nationally approved software system, and the employee’s certification authorization must be removed from the FAA logging system when any of the following have been determined:

(1) The certification authority holder has not certified the system, subsystem, or service for a period of two years or more at the date of the annual review.

(2) The Academy instructor has not administered a DoP for a period of two years or more at the date of the annual review.

c. Revoked Certification Authority. Certification authority must be revoked when one of the following circumstances occurs:

(1) When the proficiency (performance and/or knowledge of theory) of an employee has deteriorated to a level such that continued certification of a system, subsystem, or service by the employee might render it unusable or unsafe for use

(2) When the end date of the temporary certification authority period is reached

(3) When certification authority is discovered to have been erroneously granted. Administrative errors in documenting training or examinations may be corrected without revoking certification authority.

Chapter 5. Personnel Certification Authority › 5-18 Test and Training Systems Used in the NAS during Emergencies

(4) When there are no longer any systems of a particular type commissioned in the NAS. The revocation must include the following comment: “Certification revoked; no commissioned systems in the NAS.”

5-14 Change in Certification Authority Status

A change in the status of a certification authority must be documented and communicated to the employee and his or her manager. If the change is to revoke certification authority, the AOV must also be notified. If a change in status is based on proficiency, a copy of the proficiency evaluation and the first-level manager’s recommendation must be filed in the employee’s OCRF. This evaluation must use one or more of the following methods:

a. Require the employee to receive informal hands-on refresher training from another certified employee.

b. Require the employee to take the OJT course for the system, subsystem, or service. All of the policies and procedures for taking an OJT course for a certifiable system must be followed.

c. Require the employee to take the performance examination for the system, subsystem, or service. All of the policies and procedures for taking a performance examination must be followed.

d. If it is determined by the first-level manager that an employee with certification authority needs to repeat the related or associated theory requirement, the certification authority must be revoked.

5-15 Changes to Existing Certification Authorities

Unless advised otherwise, previously granted certification authority must not be affected by later changes in examinations or course configurations.

5-16 Modernizations and Equipment Replacement

A new certification authority may be required following any NAS modernization project or major equipment modification or replacement that results in a hybrid system or equipment having new theory requirements. Operations Support (AJW-1) must determine when a new certification authority is required.

5-17 Certification Authority Review Program

Technical Training (AJI-2) will conduct a monthly review of certifications entered into Certification Tracking System (CTS). Refer to Appendix 15, Certification Tracking System Review Process, for additional information.

5-18 Test and Training Systems Used in the NAS during Emergencies

Emergency contingency plans exist to protect the NAS during catastrophic events. In the event that these plans include the activation of test facilities for use in the NAS (e.g., configuring test facilities at the Technical Center to replace the facilities and function of an Air Route Traffic

Control Center by providing connectivity and bringing controllers and technical specialists to the Technical Center), these systems or subsystems may require certification as specified in FAA Order 6000.15, General Maintenance Handbook for National Airspace System (NAS) Facilities.

a. When the test or training facilities do not have a direct equivalent in the NAS, the second-level manager or above may use the temporary certification authority process to grant certification authority to employees assigned to these facilities.

b. Specific personnel certification authority documentation in the nationally approved software system is not required for these test or training facilities used in the NAS. Copies of the email documentation will be maintained in accordance with the granting of emergency certification authority policy in this order.

Chapter 6. Files, Forms, and Records › 6-4 Automated Records

Chapter 6. Files, Forms, and Records

6-1 General

In accordance with Department of Transportation (DOT) policy, the official training history for all FAA employees resides in the LMS. All records and forms generated must have filing directions included in the form descriptions.

6-2 Form and Record Correction Procedures

Due to administrative mistakes or oversights, forms and records sometimes contain errors. For paper documents, errors may be corrected by drawing a line through the error, initialing on the line, and then entering the correct data.

6-3 Computer Security, Privacy, and Freedom of Information Act

Certain legal and regulatory restrictions are placed on the collection, use, and dissemination of information. See the current version of FAA Order 1370.121. These requirements must be applied to the provisions of this directive when and where appropriate.

6-4 Automated Records

Automation allows national access to centralized electronic database applications and permits authorized users to execute training enrollments and to prepare and store official certification records.

a. System Stability. The nationally approved software system must have an approved disaster recovery plan to include a data backup system using local and off-site storage.

b. Data Retention. The nationally approved software system administrators must retain all data, in accordance with the current version of FAA Order 1350.14.

c. Signatures. Management officials are authenticated in the nationally approved software system through successful login using a secure user identification and password.

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities › 7-3 Non-Federal Use of FAA Theory Courses, Bypass Examinations, and…

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities

7-1 General

This chapter provides policy and guidance for the Non-Federal Technical Verification Program. Non-federal facilities that have been approved for instrument flight rules (IFR) and air traffic control (ATC) procedures in the NAS are required to meet Federal Communications Commission (FCC) licensing requirements. The non-federal personnel maintaining and verifying the facilities must meet the requirements specified in this chapter.

a. FCC License Needed to Maintain Transmitting Facility. Non-federal personnel maintaining any transmitter or transmitting facility must possess an FCC General Radio Telephone Operator license in accordance with 47 Code of Federal Regulations (CFR) § 87.71 and § 87.73. In addition, non-federal personnel must meet the FCC license requirements for 14 CFR Part 171: Facilities, Advisory Circulars, and Regulations.

b. Minimum Competency Level. All non-federal technicians are required to meet the minimum competency level with respect to theory and performance requirements for the same or similar systems and equipment as FAA employees.

7-2 Responsibility for Non-Federal Facilities

It is the responsibility of the Service Area Director to administer the non-federal program, but portions may be delegated to other offices in the service area, technical service operations group (TSOG), or districts. Responsibilities include the following:

a. Identify Non-Federal Facilities. Identify non-federal facilities in the geographical area that are used, or will be used, in the NAS and that have been approved for IFR and ATC procedures as outlined in 14 CFR: Part 171 and the current version of FAA Order 6700.20, Non-Federal Navigational Aids, Air Traffic Control Facilities, and Automated Weather Systems.

b. Verify Non-Federal Technician Capability. Establish methods for the appropriate service area personnel to verify the capability of non-federal personnel who are assigned maintenance responsibility for these facilities. This verification must be accomplished through the administration of suitable examination procedures as delineated in this order.

7-3 Non-Federal Use of FAA Theory Courses, Bypass Examinations, and Performance Examinations

Non-federal technicians must use the inventory of FAA theory courses, bypass examinations, and performance examinations. There must be no duplication of effort to develop unique examinations solely for the purpose of examining non-federal technicians. The theory-of- operations bypass examinations must be graded exclusively by AMA-400. See paragraph 7.4.d. for further guidance.

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities › 7-4 Training and Examination Requirements for Verification of Personnel…

7-4 Training and Examination Requirements for Verification of Personnel Maintaining Non-Federal Facilities

Personnel responsible for the maintenance of non-federal facilities described in paragraph 7.2.a. must demonstrate that they have the applicable knowledge and skills required to adequately perform this task. This includes the minimum basic system concepts, specific system theory, and specific system performance examinations. Use the certification requirements listed in Appendix 5, Air Traffic Organization Personnel Certification Requirements, as guidance for the specific courses and examinations. A separate performance examination is required on each different type of system or subsystem (as determined by the FIC) for which a non-federal technician needs verification authority. The requirements are met through satisfactory completion of the following methods:

a. Basic System Concepts Requirements. For some non-federal facilities, knowledge of basic system concepts is required prior to completing a specific system course. The basic system concepts requirements may be met by successful completion of one of the following (the non-federal employers, or sponsors, determine which method listed in this subparagraph they will use to develop or measure a technician’s level of competency for basic system concepts):

(1) An FAA Academy concept course or one of the equivalencies listed in the FIST course profile for the concept course. FAA Academy concept courses are titled using various names (“concepts,” “theory,” and “principles”).

(2) A theory bypass examination. For a list of the basic theory-of-operations bypass examinations, refer to the concepts course equivalency listing in the FIST course profile for the concepts course.

(3) For the purpose of FAA training and verification requirements, the possession of an FCC General Radio Telephone Operator license or an FAA General Radio Telephone Operator license with the additional (shipboard) Radar Endorsement must be considered equivalent to various FAA theory bypass examinations, as indicated in Appendix 3, Non-Federal Personnel Verification Program, Figure 3-1, Listing of Equivalent Theory Courses for Federal Communications Commission (FCC) Licenses and Endorsements.

(4) An equivalency based on the non-federal technician’s previous training and experience. The equivalency process used is described in paragraph 3.8.

b. Specific System Theory Requirements. The specific system theory requirements may be met by successful completion of one of the following (the non-federal employers, or sponsors, determine which of the methods listed in this subparagraph they will use to develop or measure a technician’s level of competency for specific system theory):

(1) An FAA Academy system course or one of the equivalencies (if any) listed in the FIST course profile for the system course.

(2) An FAA-approved factory-conducted training course. See Appendix 3, Figure 3-2, Listing of FAA-Approved Factory-Conducted Training Courses. Courses that are purchased

with the equipment from the Airport Improvement Program (AIP) listing of authorized systems are to be considered FAA-approved whether or not they are listed in Appendix 3.

(3) A theory bypass examination. For a list of the theory-of-operations bypass examinations, refer to the course equivalency listing in the FIST course profile for the applicable system course.

(4) An equivalency based on the non-federal technician’s previous training and experience. The equivalency process used is described in paragraph 3.8.

c. OJT Expectation for Non-Federal Technicians. Although non-federal technicians do not have to meet the OJT requirements that an FAA technician would, it is assumed that they will perform some type of OJT as preparation prior to taking a performance examination. This OJT does not need to be documented.

d. Performance/Verification Examinations. The examination requirement may be met by successful completion of one of the following, as chosen by the FAA. FAA employees who possess certification authority on the appropriate type or similar type of facility must administer performance examinations for non-federal technicians.

(1) Use a verification examination if available. These are typically for non-standard facilities that do not have a performance examination for FAA technicians. Appendix 3, Figure 3-3, Verification Examinations for Non-Federal Facilities, contains a list of non-federal facilities and the appropriate verification examinations for each type. Appendix 3, Figure 3-4, Previous Verification Examinations for Non-Federal Facilities, contains a list of previous verification examinations.

(2) Use a performance examination for an FAA facility that is the same as, or similar to, the non-federal facility. FAA examinations are located on FIST.

(3) When a verification examination or a national performance examination has not been published, the non-federal technician must satisfactorily complete a locally developed performance examination conducted by an authorized FAA examiner. See paragraph 3.7.f. for further guidance on locally developed performance examinations. If the system is a new type of non-federal facility not already included in the NAS, the service area personnel developing the locally developed examination must send a copy to AMA-400 so they can initiate action to have a suitable national examination created.

e. Prerequisite Training. The non-federal employer (or sponsor) may choose the method for satisfying prerequisite courses that are not concepts, principles, or theory. For example, the prerequisite for a voice switching system theory course may be the Introduction to Telecommunications course. This is not a basic concepts course and the non-federal employer (or sponsor) may choose the method of satisfying it.

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities › 7-6 Verification Responsibilities, Process, and Records

7-5 Effective Verification Date of Personnel Maintaining Non-Federal Facilities

Upon approval of a non-federal system for use in the NAS, action must be taken to initiate development of appropriate examinations to validate the knowledge and skills of personnel who have maintenance responsibility for the equipment.

a. Personnel maintaining equipment incorporated in the NAS who have received verification authority in any form prior to December 12, 1994, and who have maintained proficiency, are not required to take additional theory bypass examinations on the same system(s).

b. Non-federal technicians assigned maintenance responsibility for presently approved systems or for new systems, as they are approved for incorporation into the NAS, must meet the requirements of paragraph 7.4.

7-6 Verification Responsibilities, Process, and Records

Non-FAA technicians maintaining non-federally owned facilities, as identified in paragraph 7.2.a., are required to hold verification authority.

a. Non-Federal Technician’s Verification Authority Responsibility. As delegated by the Service Area Director, a District or TSOG manager is responsible for issuing non-federal technicians verification authority on a specific system, subsystem, or service.

b. Non-Federal Sponsor Responsibilities. The non-federal facility sponsor is responsible for hiring; assigning maintenance responsibility; and, with the help of service area personnel, ensuring that the technician meets the FCC licensing and FAA training and examination requirements.

c. Verification Authority Forms. Training and examination forms and records supporting verification authority must be maintained as follows:

(1) The verification authority must be documented on FAA Form 3400-3. The official form may be printed from the nationally approved software system and manually completed, or an electronic template may be used to create the hard-copy document as long as it contains all of the blocks on the official form. The process for entering the data on the form is the same as that for FAA technicians. The verification form must be maintained in hard copy or in the nationally approved software system (if available).

(2) The office granting verification authority must maintain a copy of the technician’s FCC license, basic system concepts, system theory certificates, performance examination cover sheets, verification letters, reviews, revocations, and any other supporting documentation.

d. Notice of Verification Authority. The individual non-federal technician, the employer, the sponsor, and the service area non-federal coordinator must be provided with a written notice of successful completion of verification requirements and issuance of verification authority. This written notice may be in any form deemed appropriate by the responsible service area.

Chapter 7. Verification of Personnel Maintaining Non-Federal Facilities › 7-7 Training for Non-Federal Personnel

e. Service Area Non-Federal Records. The service area (usually through the office of a service area non-federal coordinator) must maintain a record of all non-federal facilities within its jurisdiction, the names of the sponsoring organizations, and the names of the technical personnel granted verification authority for each system.

f. Verification Authority across Service Area Boundaries. Verification authority issued in one service area is valid in another. When a non-federal employer (or sponsor) wishes to use a technician holding verification authority in another service area, he or she must request a copy of the verification records from the issuing service area. These copies must be forwarded to the requesting service area and are used to document the verification authority according to paragraph 7.4. If documentation is incomplete, verification must be reissued upon completion of the requirements and written notification must be provided per paragraph 7.6.d. Otherwise, there is no requirement to reissue verification authority other than to issue the written notification from the current district.

7-7 Training for Non-Federal Personnel

The FAA Academy maintains an elaborate correspondence, resident, and computer-based instruction (CBI) training program for FAA personnel. These courses and training manuals are available to non-federal personnel on a reimbursable cost basis. After non-federal employers or sponsors receive a price quote, a written statement is required that lists the number of copies of material desired, the unit price, the total cost, and a statement that the requestor is aware of the cost and agrees to reimburse the FAA Academy for the full amount. If the course needed is an OAT course, the materials must be obtained from the contractor. All non-federal requests for training or materials should be sent to the OAT coordinator (AMA-405) at the following mailing address:

Federal Aviation Administration, Out-of-Agency Training Coordinator Mike Monroney Aeronautical Center, AMA-405 P.O. Box 25082 Oklahoma City, OK 73125

7-7 Training for Non-Federal Personnel › Appendix 1: Personnel Certification Authority Process

Appendix 1: Personnel Certification Authority Process

Official certification authority records reside in the nationally approved software system. A user guide is located at https://cmris.faa.gov. The following is an outline of the personnel certification authority documentation process.

1. All certification authority records are created by the program support specialist (PSS) in the nationally approved software system.

2. The completed certification authority record form is available for printing once a technical specialist has at least one granted authority or annual review in the Certification Tracking System.

3. Each certification authority record must reflect a facility type (FAC), which is a system, subsystem, equipment, or service, and an associated facility identification code (FIC) from a drop-down listing of acronyms as used in Appendix 5, Air Traffic Organization Personnel Certification Requirements, of this order.

4. Certification authorities can be regular, temporary, or remote regular. If temporary is selected, a revocation date 90 days after the granting date is automatically set.

5. Each certification authority record must reflect documented completions of certification criteria, as specified by Appendix 5, Air Traffic Organization Personnel Certification Requirements, of this order. Do not assume that the auto population in the nationally approved software system is correct. It is the responsibility of the PSS to ensure that the theory course, On-the-Job Training (OJT), or performance examination selected is correct according to Appendix 5, Air Traffic Organization Personnel Certification Requirements.

6. When more than one course or exam is required to meet certification requirements, the additional certification criteria and their individual completion dates must be recorded in the related Remarks block.

7. For field-conducted OJT, the name of the OJT instructor must be recorded in the OJT Comments block. Documenting the Academy-conducted OJT instructor’s name is not required.

8. For field-conducted performance examinations, the name of the examiner must be recorded in the Performance Exam Comments block. Documenting the Academy-conducted performance examiner’s name is not required.

9. The record Comments block is used by the PSS to enter comments germane to the record that are not captured elsewhere. This Comments block must be used to enter reasons for corrections or clarifications.

10. Changes to existing certification authority records because of a new FAC, a new FIC, or new certification requirements will require that a new certification authority record be created. All fields in the new record must be completed as though this was the original record.

11. Once complete, the PSS submits the record to the first-level manager for endorsement. The first-level manager endorses the record and submits it to the second-level manager for approval. This process affixes electronic signatures at each level.

12. Dates are auto populated when the record is submitted, endorsed, and granted. The date can be edited by the endorser and the grantor.

7-7 Training for Non-Federal Personnel › Appendix 2: Site Familiarization

Appendix 2: Site Familiarization

Site familiarization is an important part of the technical training process. It provides individuals with specific information regarding the localized conditions, policies, and procedures of the facility to be maintained or certified. It is required that all personnel involved with the operations, maintenance, monitoring, or certification of a facility or service be given site familiarization appropriate to their job responsibilities. This is necessary to address the inability to cover site-specific information, coordination, and so on covered in the field-administered training environment. Site familiarization will be completed for each site for which certification is to be granted or for which the employee will have maintenance responsibility. The required elements to be covered will include, but are not limited to, the following:

13. Coordination procedures for maintenance activities (e.g., scheduling maintenance activities, local coordination)

14. Airport operations (to include driving for facilities requiring movement on the airfield)

15. Knowledge of facility reference data (e.g., technical performance records (TPRs), facility drawings, initial parameters)

16. Security policy and procedures, including site or building access and key control

17. Knowledge of risk management

18. Knowledge of technical documentation procedures such as proper logging; TPR completion, retention, or disposition; and the use of any relevant software application records associated with the facility

19. Knowledge of aircraft accident procedures for the facility (e.g., verification of system operation, logging, local communications requirements)

20. Knowledge of safety policies and procedures (e.g., climbing requirements for the facility, confined space training, personal protective equipment)

21. Site-specific lock-out/tag-out power isolations for facilities (e.g., power panels, circuit breakers, receptacles)

22. Awareness of contact information used in the maintenance of the facility (e.g., utility companies, Operations Control Center, Technical Support)

23. Knowledge of connectivity paths (e.g., copper, fiber, microwave systems) to include demarcation points

24. Logistics procedures

Appendix 3: Non-Federal Personnel Verification Program

The most current official figures are located on the FAA Information Superhighway for Training (FIST) and are available for review and download by accessing Policies and Procedures > Order 3000.57 Appendices. This electronic procedure provides the user with the most current information. The following items are available:

7-7 Training for Non-Federal Personnel › Appendix 3: Non-Federal Personnel Verification Program

• Figure 3-1: Listing of Equivalent Theory-of-Operations Courses for Federal Communications Commission (FCC) Licenses and Endorsements • Figure 3-2: Listing of FAA-Approved Factory-Conducted Training Courses • Figure 3-3: Verification Examinations for Non-Federal Facilities • Figure 3-4: Previous Verification Examinations for Non-Federal Facilities

Any additions, deletions, or corrections to this Appendix 13ust be forwarded to the Technical Operations Training Division (AMA-400) through the appropriate Service Center Training Program Management Office. No additions, deletions, or corrections will be posted without prior approval from the Training Policy and Programs Group (AJI-23). Upon approval, this information will be added to Appendix 3. This appendix will be maintained and updated by AMA-400 and will be made available for download via the FIST. All additions, deletions, or corrections will be annotated with an asterisk for easy reference and identified in Appendix 7, Record of Changes to Appendices 3 through 5.

This appendix will be reviewed monthly and updated as required with additions, deletions, and revisions. A new date must be added to the Appendix 15n FIST, and a message will be sent out listing the changes.

Appendix 4 Written Formal Program

A written formal program must be implemented when an individual has not met the minimum expectations to accomplish a task; has failed a training course, a bypass examination, an On-the-Job Training (OJT) course, or a performance examination; or is required to regain a revoked certification authority. The program may be an opportunity to demonstrate performance (ODP). Satisfactory progress is defined by the employee meeting all of the requirements outlined in the written formal program. If certification authority has been revoked due to proficiency, the technical specialist must be counseled immediately, and a written formal program designed to restore proficiency must be initiated. A written formal program will not be required:

7-7 Training for Non-Federal Personnel › Appendix 4 Written Formal Program

• For an unsuccessful attempt as a first attempt to bypass a course • If an individual fails a demonstration of a proficiency or a performance examination as part of an Academy training program

Additional guidance follows.

25. Development of Written Formal Program. The employee’s first-level manager is responsible for developing and implementing a written formal program within 30 days of any event that requires one. The first-level manager may include input from a training specialist, and the employee’s FAA Form 3000-14, Technical Operations Training Plan, must be used as part of the written formal program. The Remarks block of the form may say “see attached” if all required information will not fit in the Remarks block.

26. Content of the Written Formal Program. The written formal program must include the following:

a. A list of the areas of knowledge deficiencies (if known). The areas may not be known if the employee failed a theory course or a bypass examination.

b. A list of recommended study areas

c. A list of required training

d. A list of itemized OJT requirements (if applicable)

e. An established schedule for completion of the program

f. The identified instructor and the method of documenting training (if applicable)

g. The method for measuring progress. This may include hours of study time, completion of required training, or other methods.

27. Monitoring Program Process. The employee’s first-level manager must implement the program and monitor the employee’s progress. The employee’s first-level manager is also responsible for determining the reason for any lack of progress.

28. First Alternative for Theory Course Failure. When a course that has a bypass examination is failed, the first-level manager should consider requiring the bypass examination as the first item on the written formal program. The first-level manager has the authority to customize the written formal program, enabling the employee to obtain the minimum skills necessary to become proficient.

29. Completion of a Written Formal Program. A written formal program is considered complete when the employee has met all the requirements of the program.

30. Failure of a Written Formal Program. Failure to satisfy the requirements established in the written formal program may subject the employee to reassignment, reduction in grade, or separation.

31. Filing and Retention of a Written Formal Program. A written formal program for a training event that was not intended to lead to certification authority must be filed in the employee’s training folder. A written formal program for a training event that was intended to lead to certification authority must be filed in the technical specialist’s Official Certification Record File.

7-7 Training for Non-Federal Personnel › Appendix 5

Appendix 5: Air Traffic Organization Personnel Certification Requirements

The most current official Appendix 9s located on the FAA Information Superhighway for Training (FIST) and is available for review and download by accessing Policies and Procedures > Order 3000.57 Appendices. This electronic procedure provides the user with the most current information available. This Appendix 12ists the theory, On-the-Job Training, and performance exam requirements for the Personnel Certification Program. The following content can be accessed from the website:

• Air Traffic Organization (ATO) Personnel Certification Requirements, Figure 5-1. The specific training and examination requirements for certifiable systems, subsystems, equipment, or services may be found on FIST by accessing Policies and Procedures > Order 3000.57, Appendix 5. For examples, see Figure 5-4, Air Traffic Organization Personnel Certification Requirements (Examples). • Monthly Appendix 5, Figure 1, Updates List, Figure 5-2. This figure, available on FIST, contains a list of the previous monthly updates to Appendix 5, Figure 5-1. • Previous Month’s Listings of Appendix 5, Figure 5-1, Figure 5-3. This figure, available on FIST, contains a listing of the previous month’s updates to Appendix 5, Figure 5-1, back to January 2005. • Air Traffic Organization Personnel Certification Requirements (Examples), Figure 5-4. This figure provides examples and brief explanations of the various types of entries found in Figure 5-1. These examples are not live entries. They should not be construed as current personnel certification requirements.

Any additions, deletions, or corrections to this Appendix 13ust be forwarded to the Technical Operations Training Policy & Programs Group through the appropriate service area training representative. No additions, deletions, or corrections will be posted without prior approval from the Technical Operations Training Policy & Programs Group. Upon approval, the information will be added to this appendix. This appendix will be maintained and updated by AMA-405 and will be made available for download on FIST. All additions, deletions, or corrections will be annotated with an asterisk for easy reference and identified in Appendix 7, Record of Changes to Appendices 3 through 5.

The appendix will be reviewed monthly and updated as required with additions, deletions, and revisions. A new date must be added to the Appendix 15n FIST, and a Learning Management System message will be sent out listing the changes.

7-7 Training for Non-Federal Personnel › Appendix 6

Appendix 6: Instructions for Accessing the FAA Information Superhighway for Training, the Comprehensive Management Resource Information System, and the Learning Management System

The official sources for retrieval of data, forms, and information pertinent to FAA Order JO 3000.57, Air Traffic Organization Technical Operations Training and Personnel Certification, are the FAA Information Superhighway for Training (FIST) and the Comprehensive Management Resource Information System (CMRIS).

32. FIST can be accessed at https://fist.faa.gov/ through the FAA intranet. This order and the appendices are available by selecting Policies and Procedures > Order 3000.57 or 3000.57 Appendices.

33. CMRIS can be accessed at https://cmris.faa.gov/ through the FAA intranet. The system has the following features:

a. The front page is accessible to everyone and contains general information, including user guides for the various CMRIS tools.

Continue reading ↓ 120 of 171 passages shown