Order 1350.20B Micrographics / Electronic Image Management Program
This document is cancelled. It may have been replaced. Check the official source before relying on it.
Text read by OCR from a scanned file (4 of 12 pages). Check the original, as some words may be misread.
ORDER
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION 1350.20B
SUN: MICROGRAPHICS / ELECTRONIC IMAGE MANAGEMENT PROGRAM
1. PURPOSE. This order establishes procedures and assigns responsibilities for the effective management of micro- graphics and optical disk systems in FAA.
SUN: MICROGRAPHICS / ELECTRONIC IMAGE MANAGEMENT PROGRAM
2. DISTRIBUTION. This order is distributed to the division level in Washington, regions, and centers, and to all Records Management Officers.
3. CANCELLATION. Order 1350.20A, Micrographics Management Program, dated December 12, 1981, is canceled.
4. BACKGROUND. Recent advances in micrographics and optical disk technologies now provide atfractive alterna- tives to the printed page. These advances have been stimulated by the spiraling increases in the cost of postage and printing; the continued proliferation of paperwork; and the emergence of new automated relrieval methods.
5. EXPLANATION OF CHANGES. This revision expands the agency's micrographics management program to in- clude optical disk systems. Also included are pertinent references to Federal regulations recently issued by General Serv- ices Administration (GSA) and National Archives and Records Administration (NARA).
a. Micrographics is the technology which reduces any form of information to microform for later use.
b. Microform is a general term for microimages recorded on film that includes microfiche, aperture cards, micro- film, and computer-Output-Microfiche (COM).
c. Micrographic System is a configuration of equipment and procedures that utilizes microforms for the produc- tion, reproduction, viewing, or retrieval of required documentation.
d. Micropublishing is the use of microforms in lieu of printed copy involving production of more than 250 dupli- cates from original microform. Administrative records converted to microforms are excluded.
e. Optical Disk is a laser recorded medium that can electronically store up to 80,000 pages or images per disk in Write Once Read Many (WORM) format and up to 300,000 pages per disk for the Compact Disk-Read Only Memory (CD-ROM) type.
f. Optical Disk System is a configuration of electronically connected equipment that scans, records, stores, re- trieves, and prints documents or images.
7. FORM. FAA Form 1350-5, Micrographics/Elecwnic Image System Proposal, can be obtained from the FAA Mi- crographics Management Officer, AMS410, in the Office of Management Systems and from regional and center records officers. -
Distribution: A-WXYZ-2; ZMS-322 Initiated By: AMS-410
8. AUTHORITY. Legal references and regulations governing the FAA Micrographics/Electronic Image Management ?rogam are as follows:
a. As provided in 44 U.S.C. Chapters 29 and 33, the Archivist of the United States is authorized to establish stand- ards for micrographic production and reproduction of records by Federal agencies with a view to disposal of the original records; and to establish uniform standards for the storage, use, and disposition of converted recards.
b. Appendix 1, 36 CFR Part 1230. Micrographics; Subpart A, Standarch for the Creations of Microform Records; Subpart B - Standards for the Maintenance, Use, and Disposition of Microform Records., Subpart C - CenO.alized Micro- graphics Services.
c. Appendix 2, 41 CFR Part 201-45.109. Micrographics Management; provides agency standards and guidelines for using micrographics technology in the creation, use, storage and retrieval of Federal records.
d. Regulations of the Congressional Joint Committee on Printing (JCP) require FAA to obtain JCP approval of micropublishing activity and micropublishing equipment, and require FAA central coordination of such activity.
9. OBJECTIVES. The objectives of the FAA Micrographics/Electionic Image Management Program are to:
a. Promote the effective use of micrographics and optical disk equipment and services wherever practical and eco- nomical as part of the agency's printing, documentation, and information systems.
b. Assure that all micrographic and optical disk systems are reviewed and approved prior to implementation.
c. Assure standardization and compatibility among agency micrographics equipment and systems.
10. RESPONSIBILITIES.
a. The Ofice of Management Systems is responsible for:
(1) Issuing and maintaining agency standards and procedures for micrographic systems management.
(2) Reviewing ongoing micrographic and optical disk systems periodically for conformance to established policies, procedures, and slandards.
(3) Approving or disapproving all office and service feasibility studies for new micrographic and optical disk systems and applications.
(4) . Approving or disapproving all office and service requests for micrographics and optical disk equipment and/or procurable services, excluding maintenance and supplies.
(5) Developing and maintaining a complete and accurate inventory of all micrographics equipment and optical disk systems located throughout the agency.
(6) Providmg technical advice on available micrographic and optical disk equipment and assistance in design- ing and implementing approved systems.
b. Offices, Services, Regions, and Centers are responsible for:
(1) Procuring and maintaining micrographic and optical disk systems within their jurisdiction. It is suggested that blanket maintenance service contracts for equipment (fiche readers excluded) be obtained and monitored by the Ac- quisition and Materiel Service, the Logistics Divisions in the regions, or the Management Services Divisions in the cen- ters.
Par 8
(2) Maintaining an accurate inventory of all micrographics equipment and optical disk systems located within their jurisdictions. The inventory shall include: type of equipment, name of manufacturer, model and seaial number, date of acquisition, location, and purchase or rental status.
(3) Conducting a feasibility study in accordance with 41 CFR Part 201-45.109-4 for new or revised mimgra- phic systems assuring that applications conform to agency standards contained in Order 1350.21A, FAA Microform Standards and chapter 8 of Order 1350.14A, Records Management.
(4) Requesting authority from the Office of Management Systems for proposed micrographic or optical disk systems that call for disposal of records after conversion. This authorization must be obtained prior to disposal of paper records. See chapter 8 of Order 1350.14A and appendix 2 for additional information and procedures.
c. Offices and services shall submit all feasibility studies and requests for micrographic equipment or optical disk systems to the Office of Management Systems for final approval.
d. Regional and center directors or their designees have the approval authority for all feasibility studies, microgra- phic equipment, and optical disk systems. It is suggested that the approval function be assigned to the Management Sys- tems Branch or Division in the regions or Management Services Division in the centers. A copy of all approved feasibili- ty studies shall be forwarded to the Office of Management Systems for information p~uposes.
11. MICROGRAPHIC OR OPTICAL DISK SYSTEM APPROVAL.
a. Feasibility Study. Each requesting organization shall be responsible for obtaining or conducting a feasibility study containing a costlbenefit analysis for optical disk and micrographic systems. Prior to any feasibility study, request- ing organizations shall contact the Office of Management Systems to determine if similar stuhes have been conducted. Those applications involving classified or "official use only" information must follow the provisions of Order 1600.2B, National Security Information, and Order 1600.15D, Control and Protection of "For Official Use Only" Information. Applications involving automatic data processing equipment, software, or services are governed by related ADP manage- ment directives.
b. Advice and Assistance. Technical advice and assistance concerning micrographic and optical &sk technol- ogies are available from the Office of Management Systems, AMS-410.
c. FAA Form 1350-5, Micrographics/Electronic Image System Proposal. This form shall be used as a guide in making studies and for requesting micrographic or optical disk system approvals. Supplies of these forms are available from AMS410, and from regional and center records officers.
d. Review and Approval.
(1) The regional or center director, or the director's designee, shall approve or disapprove all micrographic or optical disk system requests.
(2) The Office of Management Systems shall review and approve or disapprove all office and service micro- graphic and optical disk system requests and shall obt2in necessary National Archives and Records Administration ap- proval for planned agency systems that call for d~~posal of the paper records after conversion.
(3) All new requirements for micropublishing applications require the prior approval of the Joint Committee on Printing (JCP). The proposal stating these requirements shall be submitted to the Offce of Management Systems prior to final approval for transmittal to JCP through the Office of the Secretary of Transportation.
Page 3 Par 10
12. EXCEPTIONS. In the event of a micrographic or optical disk system outage which interrupts or delays produc- tion that is time-critical, the organization administratively responsible for the operation of the system may immediately initiate efforts to procure contractual production services on an interim basis for the duration of the outage. Under these circumstances, the feasibility study and prior approval requirements of this order are temporarily waived.
13. MEMORANDUMS OF AGREEMENT. Memorandums of Agteement, supplementary to this order, may be en- tered into by the directors of affected offices, services, centers, or regions. Applicable policy, procedures, and operating pmctices to be utilized for a specific system shall be described in detail. Such Memorandums of Agreement metr also authorize contingency plans to be followed in event of critical systems outages. &dL c ael D. Sherwin
Director of Management Systems
Par 12
1350.20B Appendix 1
APPENDIX 1 - 36 CFR, PART 1230
APPENDIX 1 - 36 CFR, PART 1230
Bec. 1130.1 &ope of put. 1280.1 Authority. 1230.4 Dciinltlona
1180.10 8torrpe. 12S0.12 ImpedJon. 1130.24 UK of microform records. 1280.26 Dimomtion of microform reoorcb.
Mp.r,c--C.nMb.d-- 1230.50 BervIcea ~ ~ b l e . 1230.62 Feea for aemlcea. A m o m 44 l7S.C. 2007. I1302 m d 9312. 80- 50 FR 16935. June 2&108S, unl- otherwk noted.
6 1230.1 &ope of put. This pert provides stsndsrds for ulng micrographic technolopy in the creation, use. 6tOra8e, retrieval, preser- vation, md dtsposition of Federal records. Agencies rhould rbo consult 41 CFR Subpart 201-45.1 for 08A re- qutrementa relating to duographic records management progrmna.
# 1230.2 Authority.
As provided in 44 U.S.C. Chapters 29 md 83. the Archivid of the United %t.W b a ~ t h o M to W b l b h W d - udr for the p h o ~ h i c md micro- graphic production md reproduction of record6 by PWerrl8genciea with a vlew to dimo6aI of the origkd
1350.20B Appendix 1
records; to establish uniform stand- ards within the Govenunent for the storage, use, and disposition of proc- essed microfilm records; and to eatab- Ush, maintain, and operate centralbed microf ilming services for Federal agen- cies.
For the purpose of this part. the folllowfng deflnitlons shall apply:
Atchivd microfilm. Silver halide microfilm meeting the requirements of Federal Standard No. 125D. Mlm. Pho- tographic and Film, Photographic Processed (for permanent records use); American Natlonal Standards Insti- tute (ANSI) Standard PH1.25-1984 safety Photographic Mlm, Specifica- tion for; PH1.28-1984 Photographic Mlm for Archival Records, Silver Gelatin Type on Cellulose Ester Base, Specifications for; PH1.41-1984 Photo- graphic Film for Archival Records, Silver Gelatin Type on Polyester Base, Specifications for; when tested by ANSI Standard PH4.8-1984, Methyl- ene Blue Method for Measuring TNo- sulfate and Silver Densftometric Method for Measuring Residual Chemicals in Mlms, Plates, and Papers; and stored in accordance with ANSI Stardard PH1.43-1983, Storage of Processed Safety Photographic Film, Practices for.
Computer Output Microfilm (COM). Microfilm containing data produced by a recorder from computer generat- ed signals.
Facility. As area set aside for equip. ment and operations required fn the production or reproduction of micro- forms either for internal use or for the use of other organizational elements of the Federal Government.
Microfilm. (a) Raw (unexposed and unprocessed) film with characteristics that make it suitable for use in micro- graphics; (b) The process of recording mlcroi- mages on film; and
tc) A fine-grain, high-resolution pho- tographic film containing an image greatly reduced in size from the orlgl- nal.
Microform. A term used for any form containing microimages.
Microimcrge. A unit of information, such as a page of text or a drawing,
that has been made too mznll to be read without magnUicstion.
Pemuanent m r d . Any record (see definition in 44 U.S.C. 3301) thot has been dttumined by the Archim of the United 8tatea to b v e mffident Utorical or other value to warrant !ta continued ree em ti on br the Govern- ment.
Unrcheduted ncofilr. Any record that ha8 not been apprrrised by NARA. i.e., a record that has neither been ap proved for dbpxal nor designated as permnnent by the Archivist of the United Stab.
Subpart A-Standards for Croatlon of Microform R d s
ff 1230.10 Authoriutioa
(a) Agencies proposing to mimfilm permanent records or unscheduled records shali submit Standard m r m (SF') 115, Request for Records Disposi- tion Authority, in accordance with Part 1228 of this chapter. The SF 115 shall provide for the diswtion of or&fnal records and microforms.
Subpart A-Standards for Croatlon of Microform R d s
( 1) Agencies proposing microf llming methods and procedures meet- the standards in 11230.14 shall include on the SF 115 the following certification: "This certifies that the records de- scribed on this form will be micro- filmed in accordance with the stand- ards set forth fn 36 CFR Part 1230."
(2) Agencies having proposed micro- filmine method8 and procedures that do not meet the standards in # 1230.14 ahall include on the SF 115 a descrip tion of the system and 6tandards pro- posed for use.
(b) The approved retention period for temporary records shall be applied to microform copies of those records; the orfelnal records shall be destroyed upon verification of the microfilm, unless legal requirements preclude early destruction of the origin&. NARA approval is not required prior to implementation of this provision.
tc) Agencies proposing to retain and store the silver original microforms of permanent records after disposal of the o14gInfb.l records shall include on the SF 115 a statement that storage conditions shall adhere to the stand- ards of # 1230.20. Such agencies shall
1350.20B Appendix 1
also indicate when the first inspection of microfilm required by Q 1230.22 wfll be conducted.
6 1230.12 Prepamtion. (a) The integrity of the orkinal records authorkd for dlsgosal shall be maintained by ensuring that the origfnal microforms are adequate mb- stftutes for the original records and serve the purpose for which such records were created or maintained. Copies shall be complete and contain all record intormation shown on the oriolnals. (b) The records shall be m-rarwed, identified, and indexed so that any in- dividual document or component of the records can be located. At a mini- mum, the records shall include infor- mation identifyfne the agency and or- ganization; the title of the records; the number or identifier for each unft of film; the securlty claslfication, if any; and the inclusive dates, names, or other data identifying the records to be included on a unit of film.
6 1230.14 MicroNming. (a) Film stock stundardk The film stock used to make microforms of per- manent records for the purpose of dis- posal of the original shall conform to Federal Standard No. 125D and be on safety-base Ernanent record film as specihed in ANSI PH1.25-1984, Safety Photom~hic Fllm. SWications for: PHI.^^-198% ~ h o t o g i p ~ c ~llm for Archival Records, Silver Gelatin TyOe on Polyester Base, Specifications for; and teeted according to PH1.29-1971. Curl of Photographic Film, Methods for Detenninlng the; and PH1.31-1973, Brittleness of Photographic Film, Method of Determining the. Proce- dures for testing are covered in Feder- al Standard No. 170B, Fllm Photo- graphic, Black and Whlte. CLassltica- tion and Testing Methods, which cites ANSI standards. To ensure protection for ~ermanent records, agencies ueine mi&film systems which do not ~roduce silver halide oripinaZe meetine ihese standards shall submit with the SF 115 required by 8 1230.10 a ached- ule for the production of silver dupll- c a b meeting the &andards.
(b) Zndcz plac-t. AU indexes, registers, or other find.ing alds, if
microfilmed, 8hall be placed in the first fr8mes at the beglmhg of a roll of fllm or in the kst framea of a microfiche or microfilm jacket. Com- puter-generated microforrrm ahall have the indexes following the data on a roll of film or in the last !runes of a microfiche or mfcrotilm jacket. Other index loations map be used only if dictated by rpedal &stem c o d t s .
tc) M n a l vennanent mtcmfl2m ncordk 8-i6tUm-th.t produce o&ina permanent records on microfilm with no paper 0- e.0.. COM, shall be designed so that they produce micro- film which meets the standards of this 6ectioXL (dl MicnvUm proc&ng. (1) Micro- forms of permanent records where the origtnal wlll be disposed of shall be processed so that the &dual thiosul- fate ion Concentration will not exceed 0.007 grams per meter in a clear area. Agencies or services that conduct tests for Federal agencies shall meet thie re- quirement by performing the methyl- ene blue test lrpecttied In ANBI PH4.8- 1984. (2) If the proassiag is to be of the reversal type, it ahall be full photo- graphic reversal; 1.e.. develop, bleach. expose, develop, fix. and wash.
(el Q w l i t y rtrmdanls. (1) The method for d e t e n d n h minlmum res- olution on microforms of source docu- ments shall conform to the Qualfty Index Method for determinlnp resolu- tion and anticipated losses when dupli- cating as described in the Associatfon for &ormation and Imaee Manage- ment (AIIM) Recommended Practice MS104. (1) For permanent records, a Quality Index of five is maulred at the third generetion level.
(ill For nonpermanent records, a Quality Index of five is required at the level of the rrpecific number of genera- tione used in the system. (ill) Resolution tests shall be per- formed using the NB8 10108 Mtcro- mpy Resolution Teat Chart or equal and the patterns will be read f o l l o ~ the iastructions provided with the chart.
(iv) The character used to determine the height used in the Quality Index formula shsll be the 6malleat charoc- ter used to displey record f n f o ~ t i o a
1350.20B Appendix 1
CFR Ch. XI1 (7-1-86 W W )
(2) The backmound photomphic densities on microforms shall be ap- propriate to the type of documents being filmed. Recommended back- ground densities are as follows:
The procedure for density measure- ment is described in AIIM Recom- mended Practice MS104-1972.
(3) Computer Output Microforms shall meet the AIIM Standard MSI-
197 1, Quallty Standards for Computer Output Microfilm.
(f Memforms and f o m t s . (1) The following - formats are mandatory standards for microforms produced by or for Federal agencies:
(1) The formats described in ANSI Standard MS14-1978, Specifications for 16 and 35mm Microfilms in Roll Form, shall be used for microfllmFne source documents on l6mm roll film. A reduction ratio of 24:l shaU be used whenever document a- permits. (ii) The formats desrrited in ANSI Standard MS14-1978, Byecifications for 16 and 35mm Microfilms in Roll FFLm, shall be used for microfilming source dncuments on 35mm roll film. When microfllmlng on 35mm film for aperture card applications, format 2 prescribed in MXL-STD 399A, Military Standard Microform Fonneta, shall be mandatory.
(iii) Format 3 prescribed in MIL STD 3994 shall be used for aperture cards.
(lv) For microfilming source docu- ments on miuoflche, the formots pre- scribed in MSL-STD 399A and the standards and specifications refer- enced therein shall be u8ed where ap-
propriate for the dr;e of document& being filmed.
(9) Mandatory l%deral COM fonnat 6tandrvds are c&t.Lned in Federal In- formation - Standards (FIPS) Publlation ~ u m k r 54. (2) The outaide dimendom for microfilm jackets ahall be 148.00+0.00-1.00mmx 106.00+0.00- 0.76mm. (g) ddicmfllm dupricatinq. The pro- duction of more than 260 duplicates from an orlqtnal microform. te., one roll of microfilm 100 feet in length or one microfiche, requlrea the approval of the Joint Committee on Printing, as set forth in the Oovernment Printing and Binding Regulatfone. Ilrlminlntra- five records and 8cmuntlng reports are exempted from thfa requirement.
Subpart B-Standards for tho Mainto- nonce, UH and Disposftion of Mi- asform R.tords
Subpart B-Standards for tho Mainto- nonce, UH and Disposftion of Mi- asform R.tords
6 1230.20 SLoryc. Nonpermanent microform records can be safely maintained under the same conditi& as most paper records. The followfnn standards as mxified in ANSI ~111.434983 are reiuired for storin8 permnnent record microforms:
(a) RoU fonn. Microforms stored in roll form 8hall be wound on cores or reele made of n o n c o m materials mch as nonferrous metals or inert plastics. Other metals may be used provided that they are coated with a corralon-redatant iinlsh. Plastics and coated metals that may exude fumes during oto-e ahall not be used for coniinlng film on mle or cores. If paper ban& are wed, the paper shall meet the rpedtications of ANSI PHl.63-LOW.
(b) S t o m conbitrtra. 8towe con- tPlnem for microforms ahdl be made of inert material8 mch rs metal or plaatic. Containers made of paper products ahould be avoided unless the conditions prescribed in ANSI Stand- ud PH1.63-1084 are met. The contain- em ahall be closed to p r o m the mi- croforms from envfmnn~ental impuri- ties .nd improper humidities.
tc) Stotcrgc roomr Storroe mms or multd for archival microforms lrhall be fire-mistant and must not be u6ed for
12/22/87 1350.20B
National Archives and Records Administration §1230.24
other purposes such as office space, previously tested, 20 percent—microworking areas, or sturage of other ms- forms tested in the last inspection, and terials. The National Fire Protection 10 percent—control group. The control Association (NFPA) publication NFPA group shall represent samples of mi- 232, Protection of Records, provides croforms from the oldest microforms further guidance. Protection from filmed through the most current. The damage by water shall be accom- results of the inspection shall be replished by storing permanent record ported to the Office ofRecords Admicroforms above reasonably antici- ministration, National Archives (NI), pated flood stages. Washington, DC 20408, 30 days after (d) Environmental conditions re- the inspection is completed. Reports quired. (1) The relative humidity of shall include (1) the quantity of microthe storage room or vault shall range form records on hand; i.e., number of from 20 to 40 percent with an opti- rolls and number of microfiche; (2) the mum of 30 percent.
Rapid and wide- quantity of microforms inspected; (3) ranging humidity changes will be the condition of the microforms; (4) avoided and shall not exceed a 5 per- any defects discovered; and (5) correccent change in a 24-hour period. tive action taken. (2) Temperature shall not exceed (b) The elements of the inspection 70·F. Rapid and wide-ranging temper- shall consist of (1) an inspection for ature changes shall be avoided and aging blemishes following the guideshall not exceed a 5 percent change in lines in the National Bureau of Standa 24-hour period. A storage tempera- ards Handbook 96, Inspection of Procture of 35 F, or below should be used essed Photographic Record Films for for color film. Aging Blemishes; (2) a rereading of (3) Solid particles, which may abrade resolution targets; (3) a remeasurefilm or react with the image, shall be ment of density; and (4) a certification
removed by mechanical filters from air supplied to housings or rooms used for archival storage. The mechanical fil- of the environmental conditions under which the microforms are stored, as shown in & 1230.10.
ters are preferably of dry media type having an arrestance or cleaning effi- ciency of not less than 85 percent as in ASHRAE Standard 52–68 (11). determined by the stain test described oxides, oxidizing agents, sulphur diox- ide, hydrogen sulfide, and others forms shall be removed from the air which cause deterioration of micro- by suitable washers or absorbers. Ar- chival microforms shall not be stored in the same room with nonsilver gela- tin films. They also shall not be stored lation system because gases given off stroy the images on the silver archival films. in another room using the same venti- by the other films may damage or de- (4) Gaseous impurities such as per- tained. Information to be contained in the log shall include (1) a complete de- number or identifier for each unit of film; and inclusive dates, names, or scription of all records tested (title; other data identifying the records on the unit of film); (2) the record catego- ry; i.e., newly tested, previously tested, or control group; (3) the date of in- spection; (4) the elements of inspec- tion; (5) the defects uncovered; and (6) the corrective action taken. In addi- 1230.14. master microform that is deteriorat- tion, the log shall contain the results of all archival film tests required by ing, as shown by the inspection, shall (c) An inspection log shall be main. (d) An agency having in its custody a
8 1230.22 Inspection. prepare a silver duplicate to replace
shall be inspected every 2 years during record microforms and records micro- filmed to dispose of the original record (a) Master films of permanent the deteriorating master. transferred to Federal records centers. inspection of agency microfilm records (e) Agencies are responsible for the
their scheduled life. The inspection shall be made using a 1 percent ran- § 1230.24 Use of microform records.
domly selected sample in the following (a) The master microform shall not categories: 70 percent—microforms not be used for reference purposes. Dupli-
1350.20B 12/22/87
§ 1230.26 36 CFR Ch. XII (7-1-86 Edition)
cates shall be used for reference and records centers, including the preparafor further duplication on a recurring tion, indexing, and filming of records, basis or for large-scale dup?ication, as inspection of film, and labeling of film for distribution of records on micro- containers. Agencies desiring microform. Agency procedures shall ensure filming services should contact the that master microforms remain clean Office of Federal Records Centers, Naand undamaged during the duplication tional Archives (NC), Washington, DC process. 20408, or the director of the Federal (b) Agencies retaining the original records center serving the agency's record in accordance with an approved records (see §1228.150 of this chaprecords disposition schedule may ter). apply agency standards for the use of microform records. 8 1230.52 Fees for services. The fees for microfilming services 8 1230.26 Disposition of microform will be announced in NARA bulletins. records.
For microfilming services not listed, The disposition of microform contact the office shown in 1230.50. records shall be carried out in the same manner prescribed for other types of records in Part 1228 of this chapter with the following additional requirements: (a) The silver halide original (or a silver halide duplicate microform record created in accordance with § 1230.14), plus one copy (silver, diazo, or vesicular), for permanent records, of each record microfilmed by an agency, shall be verified for completeness and accuracy.
The microforms may be transferred to an approved agency records center, the National Archives, or to a Federal records center, at the time that the records are to be retired in accordance with the approved records control schedule. (b) The microforms shall be accompanied by information identifying the agency and organization; the title of the records; the number or identifier for each unit of film; the security classification, if any; the inclusive dates, names, or other data identifying the records to be included on a unit of film; and a certification by an agency official that the microforms were produced in the normal course of agency operations and that care has been taken to ensure that the microforms are a complete and accurate copy of the original.
Subpart C—Centralized Micrographic Services
Subpart C—Centralized Micrographic Services
8 1230.50 Services available.
NARA provides reimbursable microfilming services at many of its Federal
12/22/87 1350.20B
APPENDIX 2. 41 CFR PART 201-45.109
§201-45.109 41 CFR Ch. 201 (7-1–87 Edition)
8 201-45.109-2Agency responsibilities.
APPENDIX 2. 41 CFR PART 201-45.109
Eah agenc? shall: (a) Issue internal regulations and procedures for the submission, review, and approval or disapproval of proposed micrographics systems and applications: (b) Issue procedures for evaluating the continued efficiency and effectiveness of micrographics systems and applications; (c) Review ongoing micrographics systems periodically for conformance to established policies, procedures, and standards; (d) Develop and maintain complete and accurate inventories of micrographics production and reproduction equipment within the agency; e.g., cameras, processors, duplicators, and COM recorders, for the purpose of resource management. The inventories shall, as a minimum, include: type of equipment, name of manufacturer, model and serial number, date of acquisition, location, and purchase or rental status; (e) Disseminate publications containing micrographics standards and guidelines and other current information concerning the advantages and limitations of micrographics systems to managers and operating officials involved in the development or operation of micrographics systems; and (f) Assign responsibility for the review and approval of all micrographics systems. The responsible office or official shall establish procedures for the review and approval of ongoing and proposed systems and application requests to ensure that they are com-
8 201-45.109 Micrographics management. plete and contain the information shown in & 201-45.109-4.
§ 201-45.109-1 Scope of section. 8 201-45.109-3 GSA responsibilities.
guidelines for using micrographics technology in the creation, use, stor- age, and retrieval of Federal records. This section provides standards and standards and criteria necessary for (a) Disseminate to agencies the GSA shall:
Additional guidance on the use of mi- developing, evaluating, and operating crographics is available in GSA infor- micrographics systems. mation resources management hand- This includes: books, Micrographics System Analysis (1) Information to acquaint potenand Computer Output Microfilm (see tial users with micrographics technolo- Appendix C of the looseleaf edition of gy and its various applications; the FIRMR), and in NARA regula- (2) Methods and procedures for contions (36 CFR Ch. XII). ducting feasibility studies;
1350.20B 12/22/87
Federal information Resources Management Reg. §201-45.109-4
(3) Criteria for estimating cost and al records centers, or by offer of perguidelines for comparing existing and manently valuable paper records to proposed systems with alternative ap- the National Archives and Records proaches; Administration(NARA) (36 CFR (4) Standards for microforms and Chapter XII); and formats, and guidelines for selecting (li) Improving current retrieval and appropriate micrographics systems for distribution procedures using paper specific types of applications; and records; (5) Standards and guidelines for (3) A consideration of all feasible al-
and effectiveness of micrographics sys- evaluating the continuing efficiency tems; tices through research projects and in- (b) Analyze Governmentwide prac- ternative methods of creating the mi- croform records, such as: (ii) Lease-purchase of equipment al- (i) Acquisition of new equipment,
spections to determine areas in which ready installed, the application of micrographics will (iii) Sharing micrographics producimprove efficiency and effectiveness in tion equipment already in the agency, the creation and use of documents and (iv) Using the micrographics facility information; of another agency, (c) Conduct periodic inspections of (v) Contracting for NARA reimbursagencies'micrographics programs as able micrographics services, part of the GSA program evaluation (vi) Contracting with a non-Governprescribed in & 201-22.003, Agency pro- ment commercial services firm, and gram evaluation; and (vii) Other alternatives identified in
Printing Office (GPO) on matters in- volving micropublishing; with the Na- Federal Information Processing Stand- ards concerning micrographics; and with the National Archives and tional Bureau of Standards (NBS) on (d) Coordinate with the Government staffing requirements to ensure suffi- cient trained personnel to operate and maintain the micrographics system; the analysis; (4) An analysis of the workload and (5) An examination of the informa-
Records Administration (NARA) on tion needs of the user when determinmicrographics systems for permanent ing reduction ratio, format, quality records. control procedures, viewing equipment, and user training; § 201-45.109-4 Micrographics systems (6) A review to ensure compatibility analysis. of microforms used within the agency (a) A systems analysis including a and those used to transmit informacost/benefit analysis shall be conduct- tion to other agencies and the public; ed by the agency prior to the decision (7) A determination of the availabilto establish a micrographics system. ity and cost of specialized space re- The cost/benefit analysis shall include quirements; i.e., temperature and hua comparative cost analysis in accord- midity control or plumbing; and ance with Office of Management and (8) A review to ensure adherence to Budget (OMB) Circular A-76, if it NARA standards for the photographic
meets those guidelines. for the documents or information and operating system to evaluate the need the use to which they are put; tain the following items: (b) The systems analysis shall con- (1) An examination of the current production of records. the most cost effective and efficient and micrographics production and re- system unless overriding intangible benefits necessitate an alternate deci- (c) The chosen alternative shall be
(2) A consideration of the alterna- sion. tives to micrographics including such (d) Procurement of COM equipment measures as: is subject to those FIRMR provisions (i) Revising records control sched- governing ADP. (See particularly Subules to provide for the disposition of parts 201-24, 201-30, and 201-32.) paper records by disposal, by transfer of inactive paper records to the Feder-