Radar Vectors
FAA Order Cancelled Issued Aug 26, 1992 AIO-20 111 pages Copy saved Nov 18, 2026

Order 1320.1D FAA Directives System

This document is no longer current. Cancelled by 1320.1E. Check the official source before relying on it.

Official source ↗ Open PDF

ORDER 1320.1D

ORDER 1320.1D

I

FAA DIRECTIVES SYSTEM

August 26,1992

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

Distribution: A-WXYZ-3;; A-E-2; ZMS-321; A-FOF-O(LTD) Initiated By: AIT-

8126192 1320.1D

FORRWORD

Consistent with the Federal Aviation Administration's mission to foster a safe, secure, and efficient aviation system is the need for an effective and efficient process for communicating policy and procedures. The FAA Directives System provides a practical framework for the agency's communication process and establishes standards for issuing direction and work information within the agency.

FEDERAL AVIATION ADMINISTRATION

This order prescribes policy, delegates authority, and assigns responsibility for ensuring agency compliance with provision of the FAA Directives System. It also directs the Office of Information Technology to issue necessary operational standards and procedures needed to manage the system.

This order provides to directives users direction for the development, preparation, tracking, and maintenance of directives. This order provides guidance for directives management personnel on how to manage and implement a uniform directives system within their office. Each office may supplement this broad coverage with specific guidelines and instructions peculiar to its needs.

To meet the needs of the diverse and often changing disciplines and functions, the Directives System cannot remain static. Recognizing that system improvement is a vital element in the

system's effectiveness and responsiveness to FAA personnel, this edition of Order 1320.1 reflects a major revision. Changes and improvements suggested by agency Directives Management Officers have been incorporated. In addition, directives users have the opportunity to offer suggestions for improvements to this directive, or any agency directive, through the use of FAA Form 1320-19, Directives Feedback Information.

Administrator

Page i (and ii)

8126192 1320.1D

TABLE OF CONTENTS

TABLE OF CONTENTS

CHAPTER 1. GENERAL

Paragraph Page

1. pcPo= … 1

2. Disuibutio n … 1

3. Cancellations … 1

4. Explanation of Changes … 1

5. Forms … 1

6. Authority to Change this Order … 1

7. Related Publications … 2

8. Policy … 2

9. Objectives … 2 . 10. scope … 2

11. General Responsibilities … 2

12. Gffice, Service, Region, and Center Heads Responsibilities … 2

12. Gffice, Service, Region, and Center Heads Responsibilities … 2

13. office of Information Technology Responsibilities … 3 14. Directives Management Offcers Responsibilities … 3

15. Writers Responsibilities … 4

16. Customer Responsibilities … 4

CHAPTER 2. APPROVAL AUTHORlTlES

SECTlON 1. ISSUING DIRECTWES

SECTlON 1. ISSUING DIRECTWES

200. Administrator or Deputy Administrator … 15 201. Executive Directors … 15 202. Assistant Adruinistrators … 15 203. Associate Administrators … 15 204. Assistant Administrators for Civil Rights, Government and Industry, Information Technology, and Public Affairs, the Chief Counsel, Office and Service Heads, and the Director of the Mike Monroney Aeronautical Center … 15 205. Washington Headquarters Division Managers … 15 206. Regional Administrators and Center Directors … 15 207. Aircraft Certification Directorates … 15 208. Resident Directors … 16 209. Straightlined Regional and Center Division Managers and Field Office and Facility Managers … 16 210. thru 212. Reserved … 16

SECTION 2. AUTHORITY TO CHANGE, REVISE, OR CANCEL DIRECTIVES

SECTION 2. AUTHORITY TO CHANGE, REVISE, OR CANCEL DIRECTIVES

213. General Rule … 16 214. Directives Approved by the Administrator, Deputy Administrator, an Executive Director, or an Associate or Assistant Administrator … 16 215. Directives Signed by an office, Service, Center Director or Regional Administrator … 17 216. thru 219. Reserved … 17

SECTION 3. AUTHORITY-CLEARING DRAFT DIRECTIVES

SECTION 3. AUTHORITY-CLEARING DRAFT DIRECTIVES

220. National Directives … 17 221. Internal Directives … 18

1320.1D 8’26192

CHAPTER 3. TYPES OF DIRECTWES ISSUANCES AND FORMATS

Paragraph Page

300. FAA Issuances … 27

301. Types of FAA Directives … 27

302. Format Exceptions … 27

303. Orders … 27

CHAPTER 3. TYPES OF DIRECTWES ISSUANCES AND FORMATS

304. Change … 28

305. Notices … 28

306. Notices Issued as Telegraphic Messages … 28 307. Supplements … 28 308. Safety Alert Directives … 30 309. Technical Issuances … 30 310. Dot Orders and Notices … 30 311. System Requirements Statements (SRS) … 30

CHAPTER 4. DIRECTIVES IDENTIFICATION (TITLING, CODING, AND NUMBERING DIRECTIVES)

CHAPTER 4. DIRECTIVES IDENTIFICATION (TITLING, CODING, AND NUMBERING DIRECTIVES)

400. General … 41 401. Titles … 41 402. Explanation of Directives Codes and Identifiers … 41 Figure 4-1. Examples of Directives Identification … 42 403. Selecting Subject Classification Number … 43 404. Assigning Sequential Numbers and Change Numbers … 43

CHAPTER 5. MANDATORY, STANDARD, AND OPTIONAL PARAGRAPHS

Figure 4-1: picture of page 4Figure 4-1 · page 4
Picture of the page from the copy saved here

CHAPTER 5. MANDATORY, STANDARD, AND OPTIONAL PARAGRAPHS

… 55 . -500. GeneraL

501. Mandatory Paragraphs … 55 502. Standard Paragraphs … 55 503. Optional Paragraphs … 56

CHAPTER 6. PREPARING THE DIRECTIVE

SECTION 1. FORMAlTING

.

.

600. 601. 602. 603. 604. 605. 606. 607. 608. 609. 610. 611. 612. 613. 614. 615.

Using Paragraphs and Subparagraph … 67 Heading and Numbering Paragraphs and Subparagraphs … 67 > Using Chapters and Sections … 67 Heading and Numbering Chapters and Sections … 67 Numbering Pages … 67 Numbering Supplement Elements … 68 Dating Standards … 69 Foreword … 69 Table of Contents … 69 Reserving Numbers for Future Use in Long Orders … 69 Figures … 70 References … 70 Citations … 70 Placing Eniphasis on Text … 70 Use of Quotation Marks … 70 Legal Terminology … 70

SECTION 1. FORMAlTING

iv

8126192 1320.1 D

Paragraph Page

.

616. Appendixes … 70

617. Sample Forms … 70 618. Charts and Graphics … 71 619. Broadside andFoldout Sheet Formats … 71 620. Identifying Materials and Supplies … 71 621. thru 649. Reserved … 71

SECTlON 2. TYPING

650. Preparing Draft and Camera Copies … 72

SECTlON 2. TYPING

65 1. Directives Forms … 72

652. Preparing Directives Using Office Automation Equipment … 72

653. Preparing Directives Using Standard Equipment … 72 654. Text Arrangement … 72

655. Signature … 73 656. Use of Asterisks/Vertical Bars in Clearing Draft Revised Orders … 73

CHAPTER 7. CHANGING AND REVISING DIRECTIVES

CHAPTER 7. CHANGING AND REVISING DIRECTIVES

7nn TTnrhtko nirwt;xrm … 85 … 85 … 85 … 85 … 86 … 86 … 86

, … 86

, … 86

CHAPTER 8. CLEARANCE PROCEDURES

800. 801. 802. 803. 804. 805. 806. 807. 808. 809. 810.

811. 812.

General … 97 Requirements … 97 Clearing Directives … 97 Deadline Dates … 98 Preparation of Clearance Record … 98 Review and Comment … 98 Summary of Comments Not Adopted … 99 Final Approval Package … 99 Obtaining Final Approval … 99 Top Management Approval of Directives … 100 Administrator, Deputy Administrator, Assistant and Associate Administrator Clearances and Approvals … 100 Feedback on Clearance Comments … 100 When to Re-coordinate a Directive … 101

CHAPTER 9. CANCELING DIRECTIVES

CHAPTER 9. CANCELING DIRECTIVES

900. General … , … 111 90 1. Cancel Only Entire Directives … I … 111 902. Canceling Notices … 111

V

132O.lD 8/26/92

Paragraph

903. Canceling Orders … 111 904. Canceling Supplements … 111

CHAPTER 10. DISTRIBUTING AND CHECKLlSTlNG DIRECTIVES

1000. General … 121 1001. Administratively Restricted or Security-Classified Directives … 121 1002. Distribution System … 121 1003. Request for Printing and Distribution Services … 122 * 1004. Changing Distribution-Originating office … 122 1005. Changing Distribution-Recipients … 122 1006. Directives Management Information System @MIS) … 122 .

CHAPTER 11. ALING DIRECTIVES

CHAPTER 11. ALING DIRECTIVES

1100. General … 133 1101. Filing Directives … 133 Figure 1 l-l. Examples of How to File Directives … 133 1102. Case Files … 134 1103. Master Reference Files … 134 1104. Working Files … 135 1105. Obtaining Copies of Directives … 135

CHAPTER 12. DIRECTIVES REVlEW AND REVALIDATION

Figure 1: picture of page 7Figure 1 · page 7
Picture of the page from the copy saved here

CHAPTER 12. DIRECTIVES REVlEW AND REVALIDATION

1200. General … 147 1201. Responsibilities … 147 1202. Assigning and Recording Revalidation Dates … 147 1203. Revalidation Methods … 147 1204. Guides for Revalidation … 147 1205. Quarterly Directives Revalidation Review … 148 1206. Directives Feedback Information Program … 148 1207. Directives System Review … 148 . Figure 12-1. Sample FAA Form 1320-20, Directives/Reports Revalidation Form … 149

Figure 12-1: picture of page 6Figure 12-1 · page 6
Picture of the page from the copy saved here

APPENDIX 1. DIRECTIVES ANALYSIS GUIDE

APPENDIX 1. DIRECTIVES ANALYSIS GUIDE

‘*

1. 2. 3. 4. 5. 6. 7.

Need for Directive … i … 1 Planning A Directive … 1 Writing/Reviewing A Directive … 1 Directives Standards … 1 Draft Copies and Deadline Dates … 2 Clearances and Approval … 2 Distribution … 2

APPENDIX 2. DIRECTIVES FORMS (1 page)

APPENDIX 2. DIRECTIVES FORMS (1 page)

vi

8126192 1320.1D

APPENDIX 3. CLEARANCE RECORD, EXECUTIVE SUMMARY, AND SUMMARY OF COMMENTS NOT ADOPTED

Paragraph Page

Clearance Record, Executive Summary, and Summary of Comments Not Adopted … 1 Preparation Instructions for Clearance Record … 2 Figure 1. Sample Clearance Record, FAA Form 1300-2 … 3 Figure 2. Sample ClearanceRecord Before Being Sent Out-Clearance with 11 or Less Offices … 4 Figure 2-l. Sample Clearance Record Before Being Sent Ou&Clearance with More than 11 Offices … 5 Figure 3. Sample of Returned Clearance Record when Coordination is with Less than 11 Offices … 6 Figure 3-l. Sample of Returned ClearanceRecord when Coordination is with More than 11 Offices … 7 Figure 4. Figure 5. Figure 6. Figure 7. Figure 8.

Figure 2: picture of page 7Figure 2 · page 7
Picture of the page from the copy saved here

APPENDIX 3. CLEARANCE RECORD, EXECUTIVE SUMMARY, AND SUMMARY OF COMMENTS NOT ADOPTED

APPENDIX 4.

APPENDIX 5. HOW TO PREPARE LONG ORDERS

Figure 1. Figure 2 Figure 3. Figure 4. Figure 5. Figure 6.

APPENDIX 6.

APPENDIX 7. TELEGRAPHIC MESSAGE (4 pages)

Figure 1. Example of a DirectiveIssued as a Telegraphic Notice … 1 Figure 2. And 2- 1. Examples of a GENOT Telegraphic Message … 2 Figure 3. Example of a RENOT Telegraphic Message … 4

Figure 3: picture of page 7Figure 3 · page 7
Picture of the page from the copy saved here

APPENDIX 7. TELEGRAPHIC MESSAGE (4 pages)

Sample of Consolidated ClearanceRecord … 8 Sample Clearance Record-Approved Directive … 9 Sample Clearance Record-Top Management Clearance … 10 Sample Executive Summary … 11 Sample Summary of Comments Not Adopted … 12

SAMPLE SHORT ORDER FORMAT (2 pages)

Cover Page … 1 Record Of Changes … 2 Foreword … 3 Table Of Contents … 4 Sample Long Order Format … 5 Sample Appendix Format … 7

SAMPLE NOTICE FORMAT (2 pages)

APPENDIX 8. SAFETY HAZARDS (1 page)

APPENDIX 8. SAFETY HAZARDS (1 page)

APPENDIX 9. PAGE CHANGES TO DIRECTIVES (2 pages)

APPENDIX 10. SUPPLEMENT FORMATS AND PROCEDURES

Figure 1. Sample Supplement Transmittal … 1 Figure 2. Sample Organizational Appendix Method of Supplementing an FAA Directive … 3 Figure 3. Sample Organizational Interleaf Method of Supplementing an FAA Directive … 4 Figure 4. Sample National Appendix Method of Supplementing a DOT Directive … 5 Figure 5. Sample National Interleaf Method of Supplementing a DOT Directive … 6 Figure 6. Sample Organizational Interleaf Method of Supplementing a Supplement

Figure 4: picture of page 7Figure 4 · page 7
Picture of the page from the copy saved here

APPENDIX 10. SUPPLEMENT FORMATS AND PROCEDURES

Issued by a Higher Level of Organization … 7 Figure 7. Paragraph and Page Numbers … 8

APPENDIX 11. COPIES OF DRAFT REQUIRED BY OFFICES, SERVICES, REGIONS, AND CENTERS WHEN CLEARING DIRECTIVES (1 page)

vii

&‘26/92 132O.lD

APPENDIX 12. SAMPLE CANCELLATION MEMORANDUM (1 page)

APPENDIX 13. USE AND COMPLETION OF FAA FORM 1320-16, DIRECTIVES ACTION INFORMATION (1 page)

Figure 7: picture of page 7Figure 7 · page 7
Picture of the page from the copy saved here

APPENDIX 14. USE AND COMPLETION OF FAA FORM 1320.6, DIRECTIVES ISSUANCE RECORD

APPENDIX 14. USE AND COMPLETION OF FAA FORM 1320.6, DIRECTIVES ISSUANCE RECORD

Paragraph Page

1. plmo= … t … 1 2. Description and Use of FAAForm 1320-6 … 1 3. Completing FAA Form 1320-6 … 1 Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. Figure 16. Figure 17. Figure 18.

Figure 5: picture of page 8Figure 5 · page 8
Picture of the page from the copy saved here

Adding a National Directive … 6 Adding a National Division Order … 6 Issuing a Change to a Current National Order … 7 Correction to Change OPR to au Existing National Order … 7 Correction to Change Revalidation Date to an Existing National Order … 8 Issuing a First Time National Supplement to a National Order … 8 Issuing a Subsequent National Supplement to a National Order … 9 Canceling a National Order … 9 Issuing a National Notice … 10 Adding a Regional Order … 11 Adding a Regional Divisional Order … 11 Issuing a Change to a Current Regional Order … 12 Correction/Revision to an Existing Regional Order … 12 Correction/Revision, to an Existing Regional Order … 13 Issuing aFirst Time Regional Supplement to a National Order … 13 Issuing Subsequent Supplements to a National Order … 14 Canceling a Regional Order … 14 Issuing a Regional Notice … 15

APPENDIX 15. SAMPLE FAA FORM 1320-19, DIRECTIVE FEEDBACK INFORMATION (1 page)

APPENDIX 15. SAMPLE FAA FORM 1320-19, DIRECTIVE FEEDBACK INFORMATION (1 page)

ALPHABETICAL INDEX (3 pages)

. . . VIII

8126P2 1320.1D

CHAPTER 1. GENERAL

1. PURPOSE. This order establishes and describes the FAA directives system as the primary means of issuing direction and work information within FAA. This order also implements Order DOT 1320.16A, Directives System, and Order DOT 1321.2, Department of Transportation Directives system.

CHAPTER 1. GENERAL

2. DISTRIBUTION. This order is distributed to branch level in Washington, regions, and centers, with a limited distribution to all field offices and facilities and copies to all Directives Management Officers.

3. CANCELLATIONS. Order 132O.lC, FAA Directives System, dated October 12, 1982, and Order 1320.55, Updating Agency Orders, dated May ,1990, are canceled.

4. EXPLANATION OF CHANGES. Th i s revision includes the following changes:

a. Paragraph 13 and 1103. The Policy & Plans Division, AIT-200, no longer maintains a master reference file of paper directives. Therefore, the appropriate Directives Management officer @MO) is responsible for providing the basic national and/or WA order with any approved changes to AIT- for microfiching. The division does maintain a complete master file of microfiched national and WA directives. Paper copies of notices are maintained in AITonly during the life of the notice.

b. Chapter 2 clarifies delegations of authority according to Order llOO.l54A, Delegations of Authority.

c. Pararaph 16 and 1206 describe the purpose and use of FAA Form 1320-19, Directives Feedback Information (see Appendix 15).

d. Paragraph 214 clarifies the procedures for changing, revising, or canceling directives signed by upper management. Appendix 12 contains sample a cancellation memorandum for canceling these directives.

e. Chapter 3 clarifies format and makeup of long and short orders.

f. Paragraph 50 1 establishes the distribution paragraph as a mandatory paragraph.

g. Paragraph 502 authorizes the use of standard paragraphs as appropriate.

h. Paragraph 502K describes when and how to use a related publications paragraph or appendix.

i. Paragraph 611 clarifies the rules for using citations and/or references in the text.

j. Paragraph 651 indicates field offices shall use the same forms as required for other offices.

Par1

k. Chapter 6 contains instructions for preparing directives on automated and standard equipment.

1. Chapter 6 consolidates preparing, writing, andtyping procedures for directives into one chapter.

m. Paragraph 801a(3) recommends coordination of directives involving personnel policies, practices, and matters affecting working conditions with the pertinent employee participation groups.

n. Paragraphs 803 modifies clearance procedures by permitting the initiating offices to deny extensions beyond clearance due date.

o. Paragraph 903 deletes the requirement for the Office of Public Affairs to announce the cancellation of national and WA directives in the FAA Headquarters Intercom.

p. Paragraph 1006 provides information on the Directives Management Information System @MIS) which contains the FAA Directives Checklist.

q. Paragraph 1205 incorporates the Headquarters Revalidation Program into this order.

r. Chapter 15, Technical Issuances, has’ been withdrawn. Technical issuances are not controlled through the directives process, are produced by only two organizations within the FAA, and consistently deviate from the standard directives format. This chapter has been withdrawn to give those organizations flexibility to establish their own standards.

s. Appendix 7 provides an example of the signature block on telegraphic messages to conform with FAA Order 1360.16, FAA Correspondence Manual.

t. Appendix 11 expands and updates recent organizational changes.

u. Appendix 14, paragraph 3c(ll) describes the use of the term OPR (Office of Primary Responsibility) in place of OPI. This term is used to clarify the originating offrice’s role.

5. FORMS. Appendix 2, Directives Forms, contains a listing of forms used in the preparation or issuance of a directive.

6. AUTHORITY TO CHANGE THIS ORDER. T h e Assistant Administrator for Information Technology may issue changes to this order necessary to implement and manage the direc tives sy stern. The Administrator reserves the authority to approve changes which establish policy, delegate authority, or assign responsibility.

132O.lD 8’26192

7. RELATED PUBLICATIONS. The latest edition of the following publications are the primary reference tools to be used in the preparation and maintenance of agency directives:

(2) Publications, including Federal Aviation Regulations (FAR) and Advisory C&lars (AC), issued primarily to and for the public.

(3) Letters or correspondence to individuals or to a a. FAA Order 0000.1, FAA Standard Subject Classification Code System

b. FAA Order 1100.154, Delegations of Authority

C. FAA Order 1330.1, Forms Management

d. FAA Order 1340.1, Reports Management

e . FAA Order 1350.14, Records Management

f. FAA Order 1350.21, FAA Microform Standards and Procedures

g. FAA Order 1720.18, FAA Distribution System

single (or several) organization(s). ANY COMMUNICATION THAT CONTAINS THE TYPES OF MATERIAL DESCRIBED IN PARAGRAPH 10A OR MEET THE OBJECTIVES INPARAGRAPH 9, MUST BE ISSUED AS A DIRECTIVE.

(4) Examinations, written tests, instructions to examiners for conducting examinations, and interview guide materials for evaluating the experience of candidates for promotion.

(5) Interagency agreements, emergency reports, and technical reports.

h. GPO Style Manual

8. POLICY. The FAA Directives System is the primary means of issuing policy, instructions, and work information within FAA. Exceptions to the requirements and standards described in this order must have the specific approval of the Office of Information Technology.

9. OBJECTIVES of theFAA Directives System:

a. Provide a uniform documentation system to be used throughout the FAA, for the development, prepamtion, maintenance, and tracking of FAA policy, procedures, and guidance.

(6) Emergency communications such as informational telegraphic messages, when extreme conditions do not permit use of the directives system.

(7) Any type of personnel reports or announcements; e.g., position vacancy announcement

(8) User and technical documents for automated data processing systems.

11. GENERAL RESPONSIBILITIES. Therearegeneral responsibilities incumbent on all users of the system. These responsibilities encompass using and maintaining the system in accordance with the guidelines defined in this document.

b. Makes information easy to locate and distribute. 12. OFFICE, SERVICE, REGION, AND CENTER

c. Consolidates information on one subject into one document.

d. Disposes of obsolete information.

10. SCOPE. FAA directives am written communications that initiate or govern actions, conduct, or procedures.

a. Directives include:

(1) Guidance or instructions that describe, establish, or explain agency policies, organization, methods, or procedures.

(2) Documents that require action or impose workload.

HEADS RESPONSIBILITIES. Office, service, region, and center heads are responsible for establishing and operating an internal directives system in accordance with the standards of this order. This responsibility requires the following actions:

a. Appoint a Directives Management Offker (DMO) at a reporting level that will reflect the importance of the position to manage all directives activities within the organization.

(1) The DMO at the office and service level in Washington headquarters shall report to the executive officer, the administrative systems manager, or a comparable position.

(3) Written information that is essential to the administration or operation of the agency or any of its programs.

b. Directives do NOT include:

(2) Region and center DMO’s shall report to the manager of the organization functionally responsible for directives management.

(3) Directives management representatives (DMR)

(1) Rules, regulations, airworthiness, and other rulemaking documents.

. may be appointed for subordinate units-as needed to assist in directives management functions. (DMR’s are usually appointed at the division level in large organizations.)

Page 2 Par 7

8126192 132O.lD

b. Ensure consistency of all directives developed in the organization with approved FAA objectives, plans, policies, and programs.

c. Evaluate compliance with the directives system a~ a part of their program evaluation processes.

d. Ensure response to substantive comments received through the coordination process (see paragraph 8 11).

e. Respond to coordination deadlines in a timely manner and ensure that comments provided are constructive and substantive.

f. Resolve conflicting and/or substantive differences between and within organizations.

13. OFFICE OF INFORMATION TECHNOLOGY RESPONSIBILITIES. The Office of Information Technology has two major responsibilities to the Directives Management System.

a. The Policy and Plans Division (AIT-200) is responsible for managing and administering the agencywide FAA Directives System. Specific activities in this regard are:

(1) Establishing system requirements and standards governing all FAA directives operations and activities.

(2) Evaluating all phases of directives activities throughout FAA for continuous improvement and enhancement.

(3) Providing technical leadership, assistance, and training to the agency DMO’s.

(4) Providing day-today assistance, as needed, to those offices and services not having DMO’s.

(5) Assigning sequential numbers for all national FAA directives including FA and WA supplements.

(6) Maintaining a set of current national and WA orders on microfiche.

(7) Providing followup support on Directive Feedback Information activity (see paragraph 16).

b. The Regulation and Organizational Analysis Division (APO-300) is the DMO for all national directives issued and reviewed by top management (i.e., all Associate Administrators and above). See chapter 2 for explanation.

14. DIRECTIVES MANAGEMENT OFFICERS RESPONSIBILITIES. Directives Management Officers manage all directives activities within their organizations in accordance with approved directives standards and practices prescribed by this directive. The DMO is the central point for directives liaison and conducts staff work necessary to assist in carrying out responsibilities to include:

a. Interpreting an application of the directives system requirements.

b. Assisting directives originators in planning, developing, consolidating, and coordinating directives from the draft stage to completion and distribution. In this regard, the DMO will:

(1) Advise originators and/or review the selection of the appropriate subject classification codes. (Refer to latest edition of Order 0000.1, Standard Subject Classification system .)

(2) Assist originators in selecting the desired audience. Check proposed distribution of individual directives to ensure compliance with systems procedures. (Refer to paragraph 1002 and Appendix 11.)

(3) Ensure that all directives originating within the organization meet clearance, format, and writing standards.

(4) Ensure that preliminary clearance and approval for forms and reports are obtained from the appropriate official(s) before a draft directive is released for comment

(5) Ensure that directives originators provide feedback to clearing officials on nonadopted substantive comments (paragraph 811).

(6) Review out-of-stock directives to determine if reprint, rewrite, revision, or cancellation is appropriate.

(7) Ensure periodic validation of all directives issued by his/her organization.

(8) Control the assignment of sequential numbers for internal directives.

c. Maintaining ccmplete case files on all directives originating in his/her office or, where case files are maintained on a decentralized basis, making certain that files are maintained correctly.

d. Scheduling periodic directives improvement meetings and arranging for short training sessions. For Washington headquarters DMO’s, this may be done on an orientation and/or discussion basis; regions and centers may use whatever procedure they deem most practical and beneficial.

e. Provide AIT- with an advancephotocopy of the approved national and WA orders to be used for microfiching.

15. WRITERS RESPONSIBILITIES. D i r e c t i v e s writers will fust determine the need and scope of a directive by using the guidance provided in Appendix 1 and by consulting with the DMO. Directives writers, with assistance from the DMO, are responsible for determining appropriate coordination considering resource impact, and preparing appropriate documentation (see chapter 8.)

Par 12 Page 3

1320.1D

16. CUSTOMER RESPONSIBILITIES. E m p 1 o y e e participation in directive writing and upkeep activities is encouraged. Any directive user who finds a subject matter conflict, an error, or obsolete information or who would like to make recommendations or suggestions, should notify the originating off& in writing, with an information copy to AIT-200. FAA Form 1320-19, Directive Feedback Information (see paragraph 1206 and appendix 15) is available for this purpose. If an interpretation or correction is urgently needed, you may call the originating office for guidance, but you should also use the FAA Form 1320-19 as a followup to verbal conversation.

Page4 (thru 14) Par 16

8i26l92 132O.lD

CHAPTER 2. APPROVAL AUTHORITIES

CHAPTER 2. APPROVAL AUTHORITIES

SECTION 1. ISSUING DIRECTIVES

ZOO. ADMINISTRATOR OR DEPUTY ADMINISTRATOR approves all directives reserved for his/her consideration and others which:

a. Establish or change FAA missions, policies, . objectives, or basic organizations or assign responsibilities.

SECTION 1. ISSUING DIRECTIVES

b. Delegate or change delegations of the Administmtor’s authority.

m c. Fail to be reconciled at levels below the Administrator. Executive directors, associate and assistant administrators, and heads of offtces and services may not approve directives if the clearance process results in significant unresolved differences or issues.

d. Establish committees as prcscrikd in the latest cdition of Order 1110.30, Committee Management

201. EXECUTIVE DIRECTORS approve directives which: a

a. Are within the authority specifically delegated to them by the Administrator or Deputy Administrator.

b. Are within the authority of an associate administrator, the head of an office, service, or other subordinate under their executive direction to approve. (These officials may specifically reserve any subject for their personal approval in this area.)

c. Involve two or more organizations under their executive direction and a single approval authority is needed.

. 202. ASSISTANT ADMINISTRATORS for Airports, Civil Aviation Security, and Policy, Planning, and Intemational Aviation, Information Technology, Accounting, and Human Resource Management approve directives which: d a. Are within the authority specifically delegated to them by the Administrator or Deputy Administrator.

b. Are within the authority of the head of an office, service, or other subordinate under their executive direction to approve. (These officials may specifically reserve any subject for their personal approval in this area)

c. Involve two or more offices or services under their executive direction and a single approval authority is needed.

203. ASSOCIATE ADMINISTRATORS approve directives which:

a. Are within the authority specifically delegated to them by the Administrator or Deputy Administrator.

Par 200

b. Are within the authority of the head of an office, service, or other subordinate under their executive direction to approve. (These officials may specifically reserve any subject for their personal approval in this area,)

c. Involve two or more offkes or services under their executive direction and a single approval authority is needed.

204. ASSISTANT ADMINISTRATORS FOR CIVIL RIGHTS, GOVERNMENT AND INDUSTRY AFFAIRS, INFORMATION TECHNOLOGY, PUBLIC AFFAIRS, AND THE CHIEF COUNSEL, OFFICE AND SERVICE HEADS, AND THE DIRECTOR OF THE MIKE MONRONEY AERONAUTICAL CENTER approve national and internal directives within their functional purview. As initiators of national directives, these individuals must ensure that:

a. The directives are consistent with approved FAA objectives, plans, policies, and programs.

b. Substantive comments from other offices, services, regions, and centers pertaining to the commenting organization’s program responsibilities are considered and explained as discussed in paragraph 811.

c. The directives for agency application arein the form of advice and guidance with respect to specific situations, or pertain to matters over which they have supervisory responsibility.

205. WASHINGTON HEADQUARTERS DIVISION MANAGERS or their equivalents may be delegated the authority to approve national directives involving matters solely within their assigned functional areas of responsibility. This authority may not be redelegated, except for certain 6000 series directives. For these directives, refer to the latest edition of Order 1320.48, Engineering Field Support Sector Maintenance Program Procedure~Support National Automation Engineering Field Division, ASM-400, and National Engineering Field Support Division, ASM-600.

206. REGIONAL ADMINISTRATORS AND CENTER DIRECTORS approve directives for regional and center organizations reporting directly to them and those directives concerning administrative matters that cross program lines. They may delegate their approval authority to the manager of Administrative Systems (if applicable) and to division managers and their equivalents to approve regional and center directives.

132O.lD 8/26/92

207. AIRCRAFT CERTIFICATION DIRECTORATES. Due to the special nature of the Aircraft Certification Directorate, each regional aircraft certification directorate manager will serve as head of the Aircraft Certification Directorate. The managers in the New England, Central, Southwest, and Northwest Mountain regions are responsible for the aircraft certification program assigned. In this capacity, each directorate manager is authorized to originate and approve national directives relative to aircraft certification programs as defined in Order 8000.51, Aircraft Certification Directorates. The guidance specified in Chapter 8, Clearance Procedures, must be followed. This authority may not be redelegated

208. RESIDENT DIRECTORS may onlyapprovedirectives unique to their area or, on a temporary basis, those covering emergency situations. This paragraph only applies to the Western-Pacific Region.

209. STRAIGHTLINED REGIONAL AND CENTER DIVISION MANAGERS AND FIELD OFFICE AND FACILITY MANAGERS may approve directives unique to their organization or, on a temporary basis, those covering emergency situations. When delegated by a Regional Administrator or Center Director, this authority may not be redelegated.

210. thru 212. RESERVED

SECTION 2. AUTHORITY TO CHANGE, REVISE, OR CANCEL DIRECTIVES

SECTION 2. AUTHORITY TO CHANGE, REVISE, OR CANCEL DIRECTIVES

213. GENERAL RULE. A change, revision, or cancellation of a directive may be approved only by an official of an office that approved the original directive or by an official of an oftice higher in the line of command. See appendix 12.

214. DIRECTIVES APPROVED BY THE ADMINISTRATOR, DEPUTY ADMINISTRATOR, AN EXECUTIVE DIRECTOR, OR AN ASSOCIATE OR ASSISTANT ADMINISTRATOR. A directive signed by the Administrator or Deputy Administrator may be changed, revised, or canceled by the responsible executive director, associate administrator, assistant administrator, or office or service director. A directive signed by an executive director, associate or assistant administrator may be changed, revised, or canceled by the responsible office or service director. This authority may not be delegated below the director level.

a. Changes. This procedure is authorized when the change does not modify an order containing policy, a delegation of authority, or an assignment of responsibility; does not have a significant impact on resource requirements or level of service provided to the aviation public or another govemmental, departmental, or agency element: and authority to take the action has not been specifically reserved for higher authority. Include an Authority To Change This Order paragraph in the order (see paragraph 502m). The “reason for attached” section of the FAA Form 1300-2, Clearance Record, which accompanies this change must include the following statement: ‘The original directive being changed or revised was signed by higher authority but the change may be approved under delegated authority because the proposed action meets the condition described in paragraph 214a of Order 1320.1D.” The proposed change and any subsequent change must be coordinated with affected offices, services, regions, and centers and the DMO (APG300) for top management. All substantive comments made during the coordination process must be resolved.

b. Revisions. This procedure is authorized when the revision does not modify an order containing policy, a delegation of authority, or an assignment of responsibility; does not have a significant impact on resource requirements or level of service provided to the aviation public or another governmental, departmental, or agency element; and authority to take the action has not been specifically reserved for higher authority. Include an Authority To Change ‘Ibis Order paragraph in the order (see paragraph 502m). The “reason for attached” section of the FAA Form 1300-2, Clearance Record, which accompanies this revision must include the following statement: “The original directive being changed or revised was signed by higher authority but themvision may be approved under delegated authority because the proposed action meets the condition described in paragraph 214a of Order 1320.1D.” The proposed revision and any subsequent revision must be coordinated with affected offices, services, regions, and centers and the DMO (APO-300) for top management. All substantive comments made during the coordination process must be resolved.

c. Cancellations. This procedure is authorized when the directive no longer serves a useful purpose and no new directive is needed to preserve continuity. A memorandum, sent from the head of the originating office, must include a statement similar to the last paragraph in the sample included in appendix 12. Appendix 12, Sample Cancellation Memorandum, contains an example of the documentation to cancel a directive. This memorandum must be coordinated (a clearance record may be used for extensive coordination) with the DMO for the directive being canceled, the DMO for top management (APO-300), and concerned organizations. After approval, a copy of the memorandum and a cancellation card, FAA Form 1320-6, should be furnished to APO-300 and to AIT- for cancellation in the next directives checklist

Par 207

8l26l92 132O.lD

215. DIRECTIVES SIGNED BY AN OFFICE, SERVICE, CENTER DIRECTOR, OR REGIONAL ADMINISTRATOR.

a. A directive signed by an office, service, or center director or regional administrator may be changed, revised, or canceled by an appropriate division manager or equivalent if one of the following conditions has been metz

(1) Prior written approval has been obtained from an offkial of the off& that approved the original directive.

(2) The original directive specifically provides that changes, revisions, or cancellations may be approved at a lower level than the approving 0fliciaL

b. Such changes, revisions, and cancellations are issued in the name of the appropriate division manager or equivalent and are controlled like any other directive signed by him/her except that they must be processed through the Directives Management Officer for the official who signed the original directive.

216. thru 219. RESERVED

SECTION 3. AUTHORITY-CLEARING DRAFT DIRECTIVES

SECTION 3. AUTHORITY-CLEARING DRAFT DIRECTIVES

220. NATIONAL DIRECTIVES. All national directives should be sent to the organization head for review and comment. National program offices am responsible for the coordination of national orders with all elements of the agency which have a valid concern, including regional and center elements.

a. Drafts of national directives for approval of the Administrator, Deputy Administrator, Executive Directors, or Associate or Assistant Administrators shall be sent to APO-300 for review and comment

(1) Drafts released for comment shall be signed by the head of the originating office, service, region, or center or appropriate regional division or directorate manager. This authority may be delegated to Manager of Administrative Systems (if applicable) or equivalent.

L (2) Comments on drafts shall be signed by heads of offkes and services; regional administrators and centerdirectors for those regional and center elements reporting directly to them; or regional and center straightlined program division z managers. This authority may be delegated to the Manager of Administrative Systems (if applicable) or offkials authorized to sign for them. The straightlined manager shall provide the regional administrator and center director, respectively, with an information copy of the comments sent to Washington. Paragraph 220e contains the responsibilities of signers.

b. Drafts of national directives for office or service head approval or for approval by the Aircraft Certification Directorate Managers shall be sent to the head of the appropriate organization for review.

(1) Authority to release draft directives for comment may be delegated to division managers. This authority may not be redelegated

(2) Authority to comment on drafts received for review may be delegated to division managers. This authority may not be redelegated

c. Drafts of national directives for Washington headquarters division managers or their equivalents.

(1) Authority to release draft directives for comment may be delegated to branch managers, but no lower.

(2) Authority to comment on drafts received for review may be delegated to branch managers, but no lower.

d. Internal Coordination. All coordination within the originating office or service shall be completed before the directive is released for external review and comment. This does not preclude informal advance coordination.

e. Responsibility of Signers.

(1) Officials signing for the office or service director, either in releasing a dmft directive for comment or in commenting on a draft directive, are signing for the whole office or service.

(2) Officials signing for the regional administrator or center director either in releasing a draft directive for comment or in commenting on a draft directive are signing for those regional and center elements reporting directly to the regional administrator or center director.

(3) Officials signing for the regional and center division or directorate manager are signing for the whole division or directorate. Straightlined regional and center program managers shall ensure that national orders sent to them for review and comment are cleared with affected regional and center elements.

Par 215 Page 17

132O.lD w26l92

(4) The signing officials are expected to obtain and take into account the views of all parts of their organization that might be concerned with the directive. Regardless of who signs the clearance form, the appropriate off& service, or center director, regional administrator, regional and center division manager; or directorate manager retains responsibility for the clearance actions of his/her subordinates.

f. Distribution of Draft Directives. All draft directives sent out for offkial comment shall be addressed to the head of the office, service, region, center, regional division, or directorate as appropriate.

221. INTERNAL DIRECTIVES. All issuing organizations may prescribe internal procedures for clearing draft directives.

Page 18 (thru 26) Par 220

132O.lD

CHAPTER 3. TYPES OF DIRECTIVES ISSUANCES AND FORMATS

300. FAA ISSUANCES.

a. National directives apply to the FAA as a whole or to more than one office, service, region, and center other than the initiating organization. All directives, except FAA headquarters directives, approved by the Administrator, Deputy Administrator, or Associate Administrators are automatically issued as national directives.

CHAPTER 3. TYPES OF DIRECTIVES ISSUANCES AND FORMATS

b. Internal directives apply only to the issuing office, service, region, or center. Internal directives use a prefix before the directive number to identify the issuing office. Exception: Many national directives that are still in effect carry prefixes which were issued under prior numbering systems. Paragraphs 402a and 802b contain additional information on internal directives.

c. FAA headquarters directives apply to two or more offices or services in FAA headquarters only or to administrative support services provided to FAA headquarters and the Europe, Africa, and Middle East Office by FAA headquarters elements. The latter are not national in scope but are local FAA headquarters operational areas of concern. The prefix ‘WA” is used to identify these directives. An office or service director or higher may approve these directives provided they do not fall within the purview of the Administrator’s reserved approval authority.

301. TYPES OF FAA DIRECTIVES.

a. Orders are bodies of permanent material that remain in effect until specifically canceled

b. Notices are temporary instructions or announcements which remain in effect for 12 months or less.

c. Changes add, delete, or modify information or instructions to orders. Changes are issued by the originator of the basic directive.

d. Supplements are additional information or instructions issued to basic directives to meet localized needs or FAA-wide supplementary information to DOT directives.

e. Other special types of FAA directives are described in the detailed description of FAA directives formats in paragraphs 308 and 309 .

302. FORMAT EXCEPTIONS. All directives should be prepared using the modified block style paragraphing. However, certain technical directives issued by the System Maintenance Service which are prepared in accordance with Orders 1320.33B, Equipment Modification and Facility Instruction Directives, and 1320.35A, Preparation of Airway Facilities Service Maintenance Technical Handbooks, are exempted. Technical Issuances issued by the Aviation

Standards National Field Office must be prepared in accordance with standards developed by that organization. If format exceptions are needed, contact APO-200.

303. ORDERS. Orders are directives on individual subjects or programs. They remain in effect until specifically canceled. Orders are updated by page changes or by entire reissuances.

a. Short orders (generally 24 pages or less) are used to issue brief bodies of information or instructions, policy, or procedures on individual subjects. They may range from orders on specific subjects that requite no implementing or supplementing of instructions to orders on broad subjects that require or direct extensive implementing instructions to take place at a subordinate level.

(1) Makeup. Short orders consist of text arranged in paragraphs and subparagraphs. Sections may be used to organize paragraphs into broad units. A table of contents may be used in a short order of eight or more pages, Illustrations, charts, tables, and other short supplementary materials may be inserted into the text as figures, but only if they do not break the continuity of the text. Appendixes are used for long bodies of supplementing or illustrative materials, formaterials not closely related to the text, or for including non-FAA materiaL

(2) Format. Prepare the first page of short orders on FAA Form 1320-1, Order Format. Appendix 4 illustrates the proper short order format. Short orders are printed on white paper.

b. Long Orders (generally 25 pages or more) usually cover a subject area in detail. They may implement broad policy established at a higher level or they may combine broad policy and guidance approved at one level and implementing instructions approved at the subordinate level. A handbook is a long order with the word HANDBOOK in the title.

(1) Makeup. Long orders are issued withbluecovers and include an FAA Form 1320-5, Record of Changes, a foreword, and amble of contents. Text is arranged in chapters, paragraphs, and subparagraphs. Sections are used when necessary to provide subdivision of chapters. Figures and appendixes may be used for illustrative and supplemental materiaL

NOTE: Appendixes are not to be considered when determining the length of the order.

Par 300 Page 27

1320.1D

(2) Format. Prepare the cover of long orders on FAA Form 1320-2, Order Cover Format The cover is printed on blue paper. Other pages are printed on white paper. Appendix 5 illustrates the proper format.

304. CHANGE transmittals are used to transmit changes to orders. The change may require the insertion of additional pages or the deletion and removal of pages for corrections or omissions of data. A change may reflect terminology modifications and any actions required to accomplish a task or project. The change transmitted may contain temporary instructions, information, or explanations. Changes are issued by the originator of the basic directive. Transmittals may be discarded or retained after necessary action has been taken (see paragraphs 502g and 702~).

a. Makeup. Changes are printed on white paper. They consist of text arranged in paragraphs and subparagraphs and a page control chart that tells what pages to remove and insert.

b. Format. Prepare the first page of a change on FAA Form 132w, Change Format. The subject line is identical to that of the basic directive. Appendix 9 illustrates the proper change format.

305. NOTICES give temporary direction or make onetime announcements. They remain in effect for 12 months or less. They are self-canceling and may not be revised or extended. When a notice is canceled or expires, the instructions in it are also canceled or expired. Only in emergencies may a notice he used to modify long-term instructions; and then prior to the cancellation of the notice, an order or a change, if appropriate, must be promptly issued. Notices or memorandums SHALL NOT be used in lieu of orders to assign permanent responsibility; to revise information currently in an existing directive; to issue continuing procedures, guidance, or direction; or to transmit DOT orders.

a. Makeup. The standards for text arrangement, figures, and appendixes in notices are the same as those for short orders. At a minimum, the text should include a purpose and distribution paragraph.

b. Format. Prepare the first page of a notice on FAA Form 1320-3, Notice Format Notices are printed on buff paper. Appendix 6 illustrates the standard notice format.

306. NOTICES ISSUED AS TELEGRAPHIC MESSAGES.

a. Telegraphic directives may be issued only as notices. They are used for emergencies when immediate notification is required. If the content of a telegraphic message is within the scope described in paragraph 10, it should be issued as a directive. As notices, they are governed by the provisions of paragraphs 301b and 305 and appendix 7.

8/26/92

(1) Makeup. Telegraphic notices follow regular telegraphic style (which is all CARS), but must contain a subject title and a cancellation date. They are assigned a subject classification number and controlled as any other notice.

(2) Format. Use Standard Form 14, Telegraphic Message. Appendix 7 illustrates the format to follow.

b. Types of Telegraphic Messages. GENOT’s and RRNOT’s can be issued as either informational or directive. If they only provide information they do need to be included in the directives system, and are not required to have a subject classification number. The initiating office determines if GENOT’s and/or RENOT’s are informational or directive in nature. Figures 2, 2-1, and 3 of Appendix 7 are samples of GENOT’s and RENOT’s.

(1) GENOT. This contraction is used to identify General Notices issued by Washington headquarters only.

(2) RENOT. This contraction is used to identify Regional Notices.

307. SUPPLEMENTS are issued by organizations other than the originator of the basic directive to provide additional internal guidance or instructions pertaining to the basic directive. Supplement transmittals are used to issue supplements to a basic directive or to revise or remove supplemental material

a. Objective of Supplements is to consolidate instructions from different levels into a single directive, instead of having instructions scattered among several directives.

b. Authorities and Limitations. Any supervisor at any level may, within the limits of his/her authority, issue supplements to his/her personnel giving instructions unique to his/her organization. However, supplements must not conflict with the provisions of the directive to be supplemented. Organizational supplements shall not be used to change or revise DOT issued directives.

c. Types of Supplements. Thereare twooffrcial types of supplements: national and organizational.

(1) National Supplements. DepartmentofTransportation (DOT) directives which affect FAA are implemented for use throughout the agency as prescribed in the latest edition of Order 1320.32, DOT Directive+Clearance and Implementation. These DOT directives may sometimes require additional or explanatory material to make them more adaptable for agencywide use. A national supplement may be issued after the DOT directive has been implemented by an FAA directive. However, the process of supplementing national directives is not encouraged and should be used only when revising the FAA order is not practical or would clearly not provide the best method of disseminating the explanatory

Par 303 Page 28

8l26192 1320.1D

materiaL Only Washington headquarters offices of primary responsibility are authorized to issue national supplements. These supplements shall be printed on salmon-colored paper and are distributed to all FAA recipients of the implemented DOT directive.

(2) Organizational Supplements are used at all organizational levels to issue supplemental material unique to the issuing organization or related to its functional responsibilities. They may be issued for DOT directives which have been implemented in FAA, basic FAA directives, national supplements to DOT directives, or organizational supplements of an equal or higher level of organization. Grganizational supplements issued by Washington, region, andcenters shall be printed on green paper. No specific color has been adopted agencywide for supplements issued by lower level headquarters organizations or field facilities. Therefore, they may be printed on any other distinctive color of paper except: white, green, buff, or salmon, as prescribed on a regional or local basis.

d. Methods of Supplementing. There are two methods by which supplemental material is issued to a directive: appendix and interleaf.

(1) Appendix Method. Supplementary material is prepared as a single unit for filing at the end of the basic directive. Appendix supplements are arranged in sections, paragraphs, subparagraphs, and figures like any appendix to a directive. The user then has a cohesive body of organizational procedures and instructions. Appendix 10, figures 2 and 4, illustrates the appendix method of supplementing.

(2) Interleaf Method. This method provides for individual sheets to be inserted into the directive as close as possible to the material being supplemented This provides the user with both supplemented and supplemental material in one place. Normally, interleaf supplements are made to individual paragraphs or subparagraphs. If the supplementing material is an addition to, or relates to, an entire section or chapter, it is placed at the end of the applicable section or chapter. Appendix 10, figures 3 and 5, illustrates the interleaf method of supplementing.

e. Identification of Supplements.

(1) Identification Symbols. Supplementing office identification symbols are used in supplement titles, identification numbers, page numbers, and main paragraph numbers to identify the type and level of the supplement. All national supplements use the symbol “FA” in titles and supplement numbers and the symbol “s” in page and main paragraph numbers, regardless of what organization originates the sup plement

, Organizational supplements use a supplementing office sym-

bol in titles, supplement numbers, main paragraph numbers, and numbers to identify the originating organization. See

Par 307

Figure 4-1, Examples of Directives Identification, for illustrations of identification symbols for various types of supplements.

(2) National Supplements. The supplement identification number consists of the FAA implementing directive number, followed by the identification symbol “FA,” the abbreviation “SUP,” and a sequential number (e.g.,

1500.14 FA SUP 2). The DOT directive number is placed in parentheses immediately under the supplementing number. If the supplement is an appendix, place the phrase “FAA Ap pendix” followed by a sequential number just below the DOT directive number and at the beginning of the appendix title. If it is an interleaf supplement, place the title “FA SUPPLE- MENTAL PAGE” in the upper center of each page. Appendix

10, figures 4, and 5, illustrates national supplements.

(3) Organizational Supplements. The supplement identification number consists of the basic FAA directive number, followed by the supplementing office identification symbol, the abbreviation “SUP,” and a sequential number. Appendix 10, figures 1,2, and 3, illustrates organizational supplements.

(a) If the supplement is to a DOT directive or another supplement, the identification number of the directive being supplemented is placed in parentheses immediately under the supplement number.

(b) If the appendix method is used, place the word “Appendix,” preceded by the supplementing office identification symbol and followed by a sequential number, just below the supplement identification number(s) and at the beginning of the appendix title.

(c) If the supplement is by the interleaf method, place the title “SUPPLEMENTAL PAGE,” preceded by the supplementing office identification symbol, in the upper center of each page.

f. Format.

(1) Transmittal. Transmitsupplementary pages by FAA Form 1320-12, Supplement Format. Use a page control chart and give any necessary explanations on the supplement transmittal sheet. The subject line is identical to that of the directive being supplemented Appendix 10, figure 1, illustrates the proper supplement tmnsmittal format.

(2) Appendix Supplement. Arrange in sections, paragraphs, subparagraphs, and figures like any appendix to adirectiveandfilefollowingtheregularappendixes. National supplements are ftied ahead of organizational supplements. (See samples in appendix 1, figures 2 and 4.)

(3) Interleaf Supplements use the same paragraphing arrangement as the basic directive. Start the text on a page facing the beginning of the specific paragraph or subparagraph being supplemented and file the supplement

132O.lD 8’26192

sheet(s), in paragraph order, facing the related material. If there are both national and organizational supplements to the same paragraph of a DOT directive, the national supplement is filed ahead of the organizational supplement. (See samples in appendix 10, figures 3, and 5.)

(4) Paragraph and chapter numbers and dates of approval are shown on the inside comers of supplemental pages in the same manner as on regular directive pages.

308. SAFETY ALERT DIRECTIVES. These are orders or notices used to draw attention to safety hazards. They are distinguished from other directives only by a slashed red border.

a. Makeup. The standards for text arrangement, figures, and appendixes are the same as for orders and notices.

b. Format. Prepare the first page of a safety alert directive on the appropriate form for an order or notice. Indicate on form DOT F 1700.3, Printing, Binding, Distribution, and Editorial Services Request, that a slashed red border should be printed on the first page. Appendix 8 shows the proper border spacing and arrangements.

309. TECHNICAL ISSUANCES (TI) are publications acquired from nonagency sources or developed within FAA that directly concern installation, maintenance, or modification of equipment, equipment systems, facilities, or aircraft. This provides a means for numbering and recognizing industry and other governmental agency prepared publications as offkial publications for use within FAA. Manufacturers’ instruction books for plants and equipment are included in the technical issuance category. Organizations publishing technical issuances shall develop standard operating procedures within their respective organizations identifying appropriate reference material as necessary. The basic objective is to permit the merging of internally developed and externally acquired technical manuals and publications into consolidated, single-source documents. Because of necessary deviations from standard directive format and issuance procedures, they are designated technical issuances.

310. DOT ORDERS AND NOTICES.

a. The Office of the Secretary of Transportation (OST) issues orders and notices that apply to OST and one or more of the operating administrations of the Department of Transportation (DOT). These directives are effective upon approval, unless a different effective date is specified. These directives are identified by a major subject classification code (similiar to FAA’s) preceded by DOT. The DOT orders are printed on white paper and notices on blue paper. Order 1320.32, DOT Directives-Clearance and Jmplementation, explains the review process and implementation of DOT dime tives.

b. When FAA implements a DOT directive, the DOT directive will be identified in the PURPOSE paragraph of the FAA directive. Certain DOT directives, such as those going to all FAA employees and to all DOT headquarters employees, are distributed without an FAA covering directive. Until appropriate FAA implementing instructions have been issued, the Office of Primary Responsibility shall determine compliance and any reporting requirements with the DOT order. When the implementing FAA order is being revised and the DOT order has not changed, state in the PURPOSE paragraph that the DOT directive is being retransmitted and has not changed.

c. An example of a PURPOSE paragraph that implements and/or transmits a DOT directive is:

‘his order (or change) describes the FAA directives system, and implements and/or transmits as appendix 1, Order DOT 1320.32.

311. SYSTEM REQUIREMENTS STATEMENTS (SRS) identify and describe valid system requirements; establish parameters within which the agency intends to satisfy system requirements; and when approved by the Administrator, provide the authority for the major system acquisition to enter into the development phase or directly into the implementation phase when development is not required The System Requirements Statement is identified by major subject classification 1812. Complete guidance for issuing these directives is contained in the latest edition of Order 1810.1, Major Acquisitions.

Page 30 (thru 40) Par 307

8126192 1320.1D

CHAPTER 4. DIRECTIVES IDENTIFICATION (Titling, Coding, and

CHAPTER 4. DIRECTIVES IDENTIFICATION (Titling, Coding, and

Numbering Directives)

400. GENERAL. The principal objective of assigning code numbers and other symbols to directives is to make it easier to file and find the directives. The system provides for filing directives on a given subject together. Other symbols help identify the type of directive and the audience to which

it was issued. Examples of directives identification are shown in figure 4-l.

401: TITLES should clearly and concisely reflect the content of the directive.

402. EXPLANATION OF DIRECTIVES CODES AND IDENTIFIERS.

a. Office Prefix Symbols.

(1) National directives do not show office prefix symbols because they apply to an agencywide audience. However, scme old national directives issued before the decision was made to omit office prefix symbols from national directives are still in effect. The mostcommon of these are:

(a) AF-issued by the former Aviation Facilities Service. These directives are the responsibility of the Systems Maintenance Service. Directives using the AFprefix are national directives.

(b) IM P-issued by the former Installation and Materiel Service. They are the responsibility of the Systems Maintenance Service.

(c) PI’-These are the responsibility of the office of Personnel Training and Higher Education.

(2) Region, Center, and Internal directives must show a prefix (usually the last two letters of the alphabetical prefix of the mail routing symbols) identifying the directive as being issued by an individual organization for internal use. Examples of how internal directives may be identified are:

only.

(a) V/P-applies to the Western-Pacific Region

(b) CT-applies to FAA Technical Center.

(c) RD-applies to the former Systems Research and Development Service only.

(3) The FAA headquarters directives must show the prefix ‘WA” to identify those directives applying to two or more offices or services in FAA headquarters only.

b. Subject Classification Code. This is a four-digit number that identifies the subject classification of the directive. These numbers are in the latest edition of Order 0000.1, FAA Standard Subject Classification Code System. Use ONLY these authorized code numbers. Paragraph 403 gives instructions on how to select the number.

c. Sequential Numbers. A sequential number (.l, .2, etc.) is placed after each four-digit subject classification number to specifically identify a given directive. Orders and notices each have a separate series of sequential numbers. They are assigned AFTER final approval of the directive. Sequential numbers are followed by letters (.lA, .lB, etc.) when complete revisions of orders are issued. Once assigned, the numbers are not reissued except with a revision letter added to identify a revised directive. Similarities between certain alpha and numeric characters often result in confusion when used. Therefore, the characters I (capital i) and 0 (capital o) should be avoided. Also the letter “Q” should be avoided. The letter “Q” in the software package that runs DMIS is a system command.

d. “P.” Some directives have the “P” between-the office symbol prefix and the subject classification code. The symbol was formerly used to identify handbooks.

“N.” Notices have the letter “N” to distinguish them fromeorders. For example, N 1300.5 or CE N 1000.1.

f. “CHG.” Change transmittals and revised pages have “CHG” and a number following the sequential number of the original directive for identification. For example,

1100.2 CHG 4 is the fourth issuance of changed pages to 1100.2.

. “SUP.” Supplements have the identification and sequenLl numbers of the basic directive. These are followed by an office symbol prefx and “SUP” For example: 1380.1A CE SUP 2 means the second time the Central Region issued supplementary material to 1380.1A.

h. “TI.” Technical Issuances have the prefix “TI.” For example: TI 404O.lA.

i. “(X).” National notices issued by the Aeronautical Center are identified by an “(X)” following the sequential number in a separately numbered series. For example: N 3OOO.lOQQ

j. “FA.” This symbol identifies supplements issued by FAA headquarters to DOT directives which have been implemented for use on an FAA-wide basis. For example: Order

1500.14 FA SUP 2.

Par 400 Page 41

132O.lD W26l92

k. c4WA.Y’ This symbol identifies directives issued by, and applicable in, Washington headquarters only. For example: WA 1700.6.

1. Legends at Bottom of Cover Page and First Page.

(2) “Initiated By.” This iclsxtifies,by routing symbol, the office that can be contacted about the contents of the directive.

(1) “Distribution.” The symbols after this legend identify the mailing list to be used in distributing the directive. See latest edition of Order 1720.18, FAA Distribution System, for an explanation of what the symbols represent

.

1320.1 1320.2 1320.2A 1320.2A CHG 1 N 1320.1 N3000.1 (JQ

1320.1 1320.2 1320.2A 1320.2A CHG 1 N 1320.1 N3000.1 (JQ

SM 1360.3 SM 1360.3B SM 1360.3B CHG 1

FIGURE 4-1. EXAMPLES OF DIRECTIVES IDENTIFICATION

EAAT 7110.1

CE N 2500.4

WA 3000.1

1600.2A FA SUP 3 (DOT 1640.4) 1320.1 WA SUP 1 1320.1 WP SUP 1 1320.1 WP SUP 2 1320.1 MS-500 SUP 3

National Directives

FIGURE 4-1. EXAMPLES OF DIRECTIVES IDENTIFICATION

First national order on directives management Second national order on the above subject. First complete revision of 1320.2. Replaces 1320.2. First page change to 1320.2A above. First national notice on directives management. National notice issued by the Mike Monroney Aeronautical Center.

Infernal Directives

Third order for use in the Systems Maintenance Service on correspondence. Second complete revision of SM 1360.3. Replaces SM 1360.3A. First page change to SM 1360.3B.

Regional/Center Directives

First order issued by Eastern Region, Air Traffic

Division on air tmffic control procedures. Fourth notice on budget issued by Central Region

FAA Headquarters Directives

First order on training applicable to Washington headquarters only.

Supplements

Third national supplement to Order 1600.2A, which implemented Order DOT 1640.4. First FAA headquarters supplement to 1320.1. First Western-Pacific Region supplement to 1320.1. Second Western-Pacific Region supplement to 1320.1. Third Washington headquarters division supplement to 1320.1 (applies internally to Management Analysis Division only).

Page 42 Par 402

132O.lD

403. SELECTING SUBJECT CLASSIFICATION NUMBER.

a. General Considerations. Before assigning a subject classification number to a directive refer to:

(1) Latest edition of Order 0000.1.

(2) The use of the major subject category and specific subject numbers assigned to previous directives in the same subject area

(3) The point of view and needs of the user, not the author.

(4) The purpose and general significance of the directive rather than the functional responsibilities of the user or the author.

(5) All subject number possibilities. No number is reserved for the exclusive use of any particular originating office, nor is any office limited to using only one subject number.

b. Selection. Rick the number that:

(1) Identifies the subject as narrowly and concretely as possible (e.g., Printing and Distribution instead of Administrative Services-General). Use the alphabetical portion of Order CtOOO.lF. This gives a narrower breakdown of the overall classification numbers.

(2) Identifies a general subject only when the directive concerns more than one specific topical area within the general subject area.

(3) Best describes the function of the directive when two or more subjects are covered (e.g., classify a directive concerning reports of equipment outage under the equipment code not under the reports code).

c. Approval of Selection. Directives writers have the responsibility for the selection of the subject classification number for a given directive. DMO’s will advise writers and/or review the selection of the appropriate subject classification number. The Architecture and Data Management Division, AIT-300, will give assistance, as requested, in the selection of subject classification numbers. In case of a question or disagreement, AIT has the authority to fmally resolve the problem. Use of a subject classification number not in the system must have specific approval. A memorandum requesting the new subject classification number and the justification must be forwarded to the Office of Information Technology, Architecture and Data Management Division, AIT-300.

404. ASSIGNING SEQUENTIAL NUMBERS AND CHANGE NUMBERS for basic directives, changes, and supplements are assigned after adirective has been approved. (Exception: Advance sequential numbers may be obtained for telegraphic messages; see paragraph 404d)

a. National Directives.

(1) Directives approved by the Administrator, Deputy Administrator, or an Associate Administrator are assigned sequential numbers by AlT-200; then the directive is stamped on the back of the signature page with the authority to print and returned to APO-330.

(2) National directives approved by office, service, region, or center heads or their designated representatives are assigned sequential numbers by AlT-200. The DMO submits the approved directive, Clearance Record, and the original and two copies of FAA Form 1320-6, Directives Issuance Record, to AIT-200. AlT-200 stamps on the back of the signature page the authority to print the directive and returns the directive, Clearance Record, and a carbon copy of the FAA Form 1320-6 to the DMO for final processing and printing. The completed package, which includes the annotated clearance record(s), the signed and dated directive, a clean photocopy of the directive, FAA Form 1320-6, FAA Form 1320-16, Directives Action Information, and DOT F 1700.3, Printing, Binding, Distribution and Editorial Services Request, are forwarded to AIT- for final processing and printing. The clearance record and a copy of the DOT F 1700.3 will be returned to the appropriate DMO after processing by AIT-200.

(3) National Directives-Aeronautical Center. The Aeronautical Center DMO assigns sequential numbers to national notices, using “W following the sequential number. Sequential and change numbers for national orders are assigned by AIT-200.

b. FAA Headquarters Directives. AIT-‘X)0 assigns sequential and change numbers to FAA headquarters directives. The DMO submits the approved directive, clearance record, and the original plus two copies of FAA Form 1320-6, Directives Issuance Record, to AlT-200 for assignment of a sequential number and approval of the directive’s readiness for printing.

c. Internal Directives. The DMO may assign se.quential numbers, change numbers, and supplement numbers for all internal directives issued by his/her organization. Sequential numbers assigned to the internal directives of one organization have no relationship to numbers issued by other organizations.

d. Advance Sequential Numbers for Telegraphic Notices. AIT- gives advance sequential numbers for telegraphic messages. The DMO calls AIT- for an advance sequential number. AIT- reserves the sequential number pending receipt of the completed FAA Form 1320-6 and a copy of the telegraphic message.

Par 403 Page 43 (thru 54)

8126192 132O.lD

CHAPTER 5. MANDATORY, STANDARD, AND OPTIONAL PARAGRAPHS

CHAPTER 5. MANDATORY, STANDARD, AND OPTIONAL PARAGRAPHS

500. GENERAL paragraphsmusthaveanumberandtitle. There are three types of paragraphs-mandatory, standard, and optional-which can be used as needed when preparing a directive.

501. MANDATORY PARAGRAPHS. All directives must contain a PURPOSE and a DISTRIBUTION paragraph*

a. PURPOSE. Always head the first paragraph PUR- POSE. Tell briefly why the directive is being issued and what it contains. Begin with a ccmplete sentence. Do not start with “The purpose of this order...” Start, for example, with ‘This order establishes a procedure for...” or when rewriting an old directive, consider “This order restates existing policy for.. ., and recasts responsibilities and procedures to agree with recent organizational changes.” If a table of contents is used in a notice or short order, it follows the purpose paragraph. See paragraph 608, table of contents. When an FAA directive implements a DOT directive, state in the PURPOSE paragraph that “this directive (also) implements DOT Order .” Do not use the title (first or introductory) line of a directive to show the implemented DOT directive (see paragraph 3 10).

b. DISTRIBUTION. Always head the second pamgraph DISTRIBUTION. State what the distribution of the directive is and who the users are. A distribution paragraph is also mandatory on change transmittals (see Appendix 9). The coding at the bottom of the page must correspond with this paragraph. (See the latest edition of Order 1720.18 for distribution codes.) Users are those offices or persons required to take action based on the directive or who must know that a directive has been issued All supplements shall be distributed to the originating office for reference and information purposes.

502. STANDARD PARAGRAPHS shall be used to highlight significant information contained in the directive; i.e., Cancellation or Related Publications paragraphs.

a. CANCELLATION. If a directive cancels other directives, forms, or reports, use a CANCELLATION paragraph to identify them. An example of a CANCELLA- TION paragraph: “Order 1300.1, Management Data Programs, dated October 30,1985, is canceled”Do not cancel parts of a directive; instead, issue a change for this purpose (see paragraph 901).

b. ACTION. Use an ACTION paragraph when the directive requires the user to perform a one-time action to meet a deadline. Include the due date and who is responsible for the action. Do not use an ACTION paragraph merely to summarize continuing actions, procedures, and requirements that are explained throughout the text.

Par 500

c. EFFECTIVE DATE. The approval date is normally the effective date of the directive. When it is necessary to make provisions in a directive on a date other than the approval date, head the next paragraph EFFECI’IVE DATE. If only a part of the directive is effective on a certain date, use a specific date and reference, such as “paragraph 402 effective on October 16, 1990. All other provisions are effective as of the date of this directive.” When selecting an effective date, take into account the time needed for printing, distributing, and implementing directives.

d. BACKGROUND. Limit background information to that which is essential to the user. DO NOT use it merely to cite authority to issue the directive or to give a detailed description of actions leading up to the issuance of the directive.

e. EXPLANATION OF CHANGES. This paragraph is used to highlight briefly significant changes when an order is revised or when supplements or changes am issued. This paragraph should not contain minor or editorial changes (See paragraph 704a(2)).

f. DELEGATION OF AUTHORITY. Usethisparagraph only when an unusual and specific delegation is made. This paragraph should not be used for authority already delegated in organizational and functional statements or to list responsibilities assigned by the order. Do not use this paragraph for authority to issue changes to an order.

g. DISPOSITION OF TRANSMITTAL. Use this paragraph when the transmittal sheet contains information explaining the change or information concerning the length of retention. For example, “this transmittal sheet may be discarded on July 1,1990,” or “this transmittal sheet should be retained until the basic directive is canceled by a new directive.” (See paragraph 702c.)

h. DEFINITIONS. Use a DEFINITIONS paragraph whenever a directive introduces new terms or establishes a specific meaning to any term.

i. REQUESTS FOR INFORMATION. If the author expects calls for further information or clarification use a REQUEST FOR INFORMATION paragraph. It should instruct readers who want more information or have questions about the directive to contact the office that is most familiar with the contents of the directive. Generally, the “initiatedby” entry on the first page of the directive should suffice in lieu of this paragraph.

j. FORMS AND REPORTS. Use this paragraph to list all forms and reports specified in the directive or list them in an appendix.

132O.lD 0l26l92

(1) The relative importance of the form orreportin the directive (for example, a short order prescribing a new report form) may determine the location of information concerning its preparation and use. However, such instructions should not be included in this paragraph of a long order. Give detailed instructions for preparation, signing authority and limitations, number of copies, and where to send them, in the text of the order or on the form.

(2) Include the following information in the forms and reports listings or refer the reader to detailed instructions in the text:

(a) Forms Listings:

I. Number and title of form.

2. Order information such as National Stock Number (NSN), unit of issue, etc.

3. Source of supply and availability date. BE SURE it will be available at the work place before you establish a mandatory date for its use.

(b) Reports Listing:

1. Report title and report identification symbol (RIS).

2. Reporting periods and due dates. Follow the standards in the latest edition of Order 1340.1, FAA Reports Management Handbook, to prescribe reporting requirements. Short due dates on reports may be placed in the ACTION paragraph.

3. Reference to prescribing text

k. RELATED PUBLICATIONS. Use this paragraph to identify publication(s) to be used as a source of reference or that provides information to a program or process in conjunction with the directive. A long list of related publications should be combined in an appendix.

3. Reference to prescribing text

1. AUTHORITY TO CHANGE THIS ORDER. Use this paragraph to authorize an associate administrator or an office or service director to issue certain changes to an order. Generally, this authorization will permit the official to issue changes which do not affect policy, a delegation of authority, or an assignment of responsibility.

503. OPTIONAL PARAGRAPHS.

These are paragraphs other than standard paragraphs which can be used at the option of the directive writer. The writer determines when optional paragraphs are needed. HOW- EVER, OPTIONAL PARAGRAPHS SHOULD BE SE- QUENCED AFTER THE MANDATORY AND STANDARD PARAGRAPHS. Examples of headings of optional paragraphs are POLICY, PROCEDURES, RESPON- SIBILITIES, AND GUIDELINES. Any questions concerning the use or sequencing of optional paragraphs should be addressed to your DMO.

Page 56 (thru 66) Par 502

8l26l92 132O.lD

CHAPTER 6. PREPARING THE DIRECTIVE

CHAPTER 6. PREPARING THE DIRECTIVE

SECTION 1. FORMATTING

600. USING PARAGRAPHS AND SUBPARAGRAPHS.

a. Paragraphs. Paragraphs are the basic units of text in all directives. Use a separate paragraph for each important

b idea or segment of the subject area covered. Paragraphs over

10 lines are hard to read and understand. Break them up into separate paragraphs or subparagraphs. Start each paragraph and subparagraph with a complete sentence except for listings . and enumerations. (See appendixes 4,5, and 6.)

SECTION 1. FORMATTING

b. Subparagraphs. Use subparagraphs to break up long paragraphs or to list conditions, exceptions, or procedures. Keep the number of subparagraphs to a minimum within a paragraph. This will avoid having the last subparagraph so far away from the paragraph subject heading, that both the writer and reader could lose continuity. Avoid excessive levels of subordination such as (l), (a), and 1 (see paragraph 601e). At least hvo subparagraphs at every level of subordination should be used (See appendixes’4 and 5.) a

601. HEADING AND NUMBERING PARAGRAPHS AND SUBPARAGRAPHS.

a. Give every paragraph a number and title heading.

b. Use headings for all subparagraphs except:

(1) Short listings.

(2) Brief enumerations.

(3) Step-by-step actions.

. c. Use the same type of headings on all subparagraphs in the same series if one or more has a heading.

d. Number paragraphs with Arabic numbers.

m Number sequentially throughout the directive or start a new paragraph series for each chapter. Always start a new paragraph series for each appendix. Two methods of numbering paragraphs to coincide with chapters are illustrated:

Chapter Number

Paragraph Example 1

Paragraph Example 2

Chapter 1

Chapter 1

Chapter 2

59 phs 8” Paragraphs l-l through l-999

Paragraphs 2-l through 2-999

Chapter 3

e. Number or letter subparagraphs as follows:

(1) First level subdivision-a, b, c, etc.

(2) Second level subdivision-(l), (2), (3), etc.

(3) Third level subdivision-(a), (b), (c), etc.

Chapter 3

(4) Fourth level subdivision--l, 2,3, or i,z,J, etc.

(5) Fifth level subdivision-( (bb), (cc), etc.

f. Indent subparagraphs as shown in appendix 4.

602. USING CHAPTERS AND SECTIONS.

a. General. Although paragraphs are thebasic units of text, it is often necessary to group material into broader subject matter units such as chapters and sections. (See appendix 5, figure 5.)

b. Chapters. Use chapters in long orders only. Cover one broad related subject area in each chapter. If the material covered by the long order cannot be broken into major subject areas, use paragraphs only. Break down chapters, when necessary, into sections. One chapter may have two or more sections, while other chapters may have none. In a long order, do not use sections without using chapters.

c. Sections. Use sections in long orders, short orders, notices, and appendixes. Use sections to group lengthy collections of paragraphs into major topic areas.

603. HEADING AND NUMBERING CHAPTERS AND SECTIONS.

a. Chapters are numbered with Arabic numbers in sequence throughout the order.

b. Sections are numbered with Arabic numbers in sequence within a chapter. Begin a new sequence with each chapter.

604. NUMBERING PAGES. Number all pages with consecutive Ambic numbers except:

a. First Pages of Orders, Notices, Changes and Supplement Transmittals shall be considered page 1 (right hand/odd page). Begin numbering the next page with page 2 (left hand/even page). An alternate method of numbering for a long order is to identify pages with the chapter and the page (e.g., Chapter 7 pages would be numbered 7-1,7-2,7-3, etc.).

Par 600 Page 67

1320.1D

b. Foreword and Table of Contents. Begin numbering the foreword with page i (right hand/odd page). For the table of contents, continue with the first right hand/odd Roman numeral following the foreword. (For example, if the foreword ends on page i, number it “Page i (and ii)” and begin the table of contents on page iii. If the foreword continues and ends on page iii, number it “Page iii (and iv)” and begin the table of contents on Page v.) (See paragraph 608a.)

c. Appendixes. Number each page of appendixes with Arabic numbers beginning with “Page 1” on the first page. If there is more than one appendix to a directive, begin each appendix with a “Page 1.”

d. Blank Pages. Consider all blank pages as numbered but do not place the number or the date on the page. The previous page shall carry the number for the blank page. For example: “Page 9 (and lo).”

605. NUMBERING SUPPLEMENT ELEMENTS.

a. General. Number supplements with the basicFAA directive number, followed by the supplementing office identification symbol, the abbreviation “SUP,” and a sequential number. (See appendix 10, figure 1.) Supplement sequence numbers are not related to change sequence numbers. Each organization supplementing a directive uses a separate set of sequential numbers beginning with “1.”

b. Appendix Method. Number pages, sections, paragraphs, and figures in sequence throughout the supplementing appendix. The supplementing office identification will be used in paragraphs with this method.

c. Interleaf Method. The purpose of the interleaf method is to place the supplemental information as near as possible to the material being supplemented.

(1) Paragraphs. Numbersupplementalparagraphs using the paragraph number of the directive being supplemented, followed by a dash, the supplementing office identification symbol, and a sequential number. (For example: Supplemental paragraph 24-Sl is the first supplemental paragraph of a national supplement to paragraph 24 of a DOT directive.)

(a) Subparagraphs. Supplemental paragraphs may be divided into subparagraphs. In such cases, they are numbered in the same manner as regular subparagraphs (and are NOT identified with the material being supplemented). However, when specific subparagraphs are supplemented, the supplemental subparagraph is numbered in the same manner as paragraphs. (For example: Subparagraph 18b(2)-EAl is an Eastern Region supplement to subparagraph 18b(2) of the basicFAA directive.)

(b) Titles. If the paragraph or subparagraph being supplemented has a title, use the i&mica1 title on the supplement or use a title closely related to correlate the two.

8’26192

(c) Supplementing Supplements. When sup plementing a paragraph or subparagraph of a national supplement or an organizational supplement issued by a higher level organization, the same numbering procedures are used (For example: Paragraph 15-Sl-CE1, Control Procedures, is a Central Region supplement to a national supplementation of paragraph 15, Control Procedures, of a DOT directive.)

(d) Examples. For additional examples of supplemental paragraph numbers, see appendix 10, figure 7.

(2) Chapters and Sections. Interleaf supplements are usually related to paragraphs and subparagraphs. However, when necessary, chapters or sections may be supplemented as a whole. In such cases, the appendix method should be used and supplemental information arranged in paragraph format and treated the same as prescribed for the appendix method of supplementation in paragraph 307d(l) and appendix 10, figures 2 and 4.

(3) Pages. Supplement pages are numbered using the same general procedures used for numbering paragraphs and subparagraphs.

(a) Relationship of Page Numbers. Supplemental page numbers are always related to the PRE- CEDING page of the BASIC directive or supplement being supplemented. This rule applies whether the material being supplemented is an odd-numbered or even-numbered page. Consequently, SUPPLEMENT PAGE NUMBERS ARE AL- WAYS RELATED TO AN EVEN-NUMBERED OR LEFT-HAND PAGE. When supplementing the FIRST PAGE of an order, the supplementaty page must be placed after page 2 and be numbered accordingly.

1. Basic Directives. If a basic FAA or DOT directive is being supplemented, the supplement page number is always related to the basic directive.

2. Other Supplements. If an evennumbered page of a national supplement is being supplemented, the organizational supplement will be filed following the national supplement page and the organizational supplement page number will be related to the national supplement page number. If an odd-numbered page of a national supplement is being supplemented, the organizational supplement page number will be related to the number of the page which immediately precedes it. This may be a page of the DOT directive or a national supplement page. The same relationships apply when a subordinate organization is supplementing a supplemental page issued by a higher level organization.

(b) Page Number Components. Supplement page numbers consist of the page number of the preceding page (always an EVEN numbered page of the basic order), followed by a dash, the supplementing office identi-

Par 604

6l26l92 132O.lD

fication symbol, and a sequential number; e.g., %-CEl. If the material being supplemented begins on an odd-numbered page, the supplemental information will begin on the back of the supplementing sheet and the first number used will be 2; e.g., 24-CE2.

(c) Multiple Pages. If more than one page is needed for the supplemental information, it will be continued on additional supplemental sheets. Both the front and back of continuation sheets are used and the pages are numbered with the succeeding page numbers. For example: 32-S3,32-S4, %-CEl, 56-CE2.

(d) Examples. Appendix 10, figure 7, gives examples of page numbers for various types of interleaf supplements.

(4) Blank Pages. If the text of a supplement begins on an even-numbered page, leave the front side of the sheet completely blank Centered at the bottom of the text page, type the phrase ‘THE FRONT OF THIS SHEET INTEN- TIONALLY LEFT BLANK” (see appendix 10, figures 3 and 5). Likewise, if the supplement text ends on an odd-numbered page, leave the back of the sheet completely blank and add the sequential number of the blank page, in parentheses, after the text page number. For example: Page 18-CEl (and CE2). Leaving unused pages completely blank saves making an unnecessary printing master.

(5) Figures. Use the number and title of the figure being supplemented, preceded by the supplementing offrce identification symbol. For example: Figure FA 8, Costs by Organization; or Figure WP 2-1, Summary of Operations. If you are originating figures rather than supplementing existing ones, number according to instructions in paragraph 610d and precede the word “figure,” by the organization identifier. For example: WP Figure 1.

606. DATING STANDARDS.

a. Cover Page of Long Orders. The approval date shown on the cover page of long orders shall appear in this manner: March 1,199O.

b. Dating Pages. Date all pages of directives, including the first page, with the date of approval using the following style: 10/l/90. Date all new pages with the date the change was approved. When pages are reprinted without change, the date on the unchanged page will remain the same. See paragraph 703 on dates to put on changed first pages and changed signature pages.

c. Reference to Dates in Text. When making reference to dates in the text of a directive, use this style for the date: October 1,199O.

607. FOREWORD. Long orders must have a foreword. Use the foreword to summarize briefly the purpose and contents of the directive and to show the signature of the

approving official. It should be no more than two pages. Do not put policy, permanent instructions, or procedures in forewords. Appendix 5, figure 3, contains an illustration of a foreword.

608. TABLE OF CONTENTS.

a. Long Orders. Always use a table of contents preceding the text and list each chapter, section, paragraph, figure, and appendix in order of appearance. List the page number on which the division first appears, but do not list subparagraphs. List the contents of long appendixes and show the page numbers. Appendix 5, figure 4, contains an illustration of a table of contents. (also see paragraph 604b).

b. Notices and Short Orders. A table of contents may be used in notices and short orders of eight or more pages. List sections and/or paragraphs and page numbers immediately following the purpose paragraph. Appendix 4 contains an example listing paragraphs. The following shows an example listing sections only:

TABLE OF CONTENTS

TABLE OF CONTENTS

Title Page

SECTION 1. GENERAL 1

SECTION 2. AIRCRAFT 3

SECTION 3. VEHICLES 8

609. RESERVING NUMBERS FOR FUTURE USE IN LONG ORDERS. If additional material is anticipated for future insertion, reserve necessary chapters, sections, paragraphs, and pages. Make reservations as follows:

SECTION 3. VEHICLES 8

a. Chapters. Reserve chapters aud pages in table of contentsDo not use blank pages. Givetheanticipatedchapter number and the title or word RESERVED. For example:

CHAPTER 7. LIMITATION (RESERVED) (Reserved 7-16 thru 7-18)

CHAPIER 14. RESERVED. (Reserved 14-1 thru 14-20)

b. Sections. Reserve sections and pages in the table of contents the same as for chapters. Also show reserved section in the text, centered on the page. For example:

SECTION 7. RESERVED

SECTION 7. RESERVED

c. Paragraphs. Show the reserved paragraph number(s) in the table of contents and in the text. If more than one paragraph is reserved, show the fmt and last number.

Par 605 Page 69

132O.lD

(1) For the table of contents, show the reserved paragraph or paragraphs. For example:

14. Reserved

14. Reserved

14.-19. Reserved

(2) In the text show the reserved paragraph or paragraphs as follows:

14. RESERVED.

14,19. RESERVED.

d. Pages. Reserve page numbers on the last printed text page before the point of plarmed insertion. Following the last page number, insert the reserved pages as follows: Page 17 (and 18) or Page 17 (tbru 24).

610. FIGURES.

a. When to Use. Use figures to insert examples, charts, tables, and illustrative material in the text. Insert figures near the text that mentions the figure. Keep figures short Figures of more than one page break continuity of text, and the relationship of figure and text is lost. Long bodies of supplementary and illustrative material should be placed in appendixes. (See paragraph 706.)

b. Format. The figure format is dependent upon the nature of the material. Prepare the material clearly and neatly. Set off figures as illustrated in chapter 4, figure 4-l.

Continue reading ↓ 120 of 346 passages shown