Order 1110.153A Rulemaking Management Council Charter
This document is cancelled. Cancelled by 1110.153B. Check the official source before relying on it.
U.S. DEPARTMENT OF TRANSPORTATION ORDER FEDERAL AVIATION ADMINISTRATION 1110.153A National Policy
Effective Date:
02/12/13
SUBJ: Rulemaking Management Council Charter
1. Purpose of this Order. The Rulemaking Management Council plans, coordinates, and manages the Federal Aviation Administration's (FAA) regulatory program.
2. Audience. The audience for this order includes: the service and division levels in Washington, the Technical Center, the Aeronautical Center, the regional administrator level in the regions, and the branch level in the Aircraft Certification Directorates.
3. Where Can I Find This Order? You can find this order on the Directives management System (DMS) Web site at https://employees.faa.gov/tools resources/orders notices/. This order is available to the public at http:/ /www.faa.gov/regulations policies/orders notices/.
4. What This Order Cancels. This order cancels FAA Order 1110.153, dated April4, 2009.
5. Background. In early 1998, an ad hoc FAA Rulemaking Process Reengineering team, composed ofrepresentatives from the regulatory lines ofbusiness, recommended the creation ofa Rulemaking Steering Committee1 and a Rulemaking Management Council (Council). The Council, which includes the Directors ofall services/offices with rulemaking responsibility, has been operating for more than a decade. This order institutionalizes the organization, mission, and membership ofthe Council.
6. Objective and Scope of Activities. To ensure an effective and efficient set ofpriorities, and allocate resources for rulemaking projects, the Council will:
a.' Manage the agency's rulemaking program,
b. Approve projects (including schedules and resource allocations),
c. Determine rulemaking priorities,
d. Make decisions and resolve issues, and
e. Raise significant issues to the Strategy, Budget and Planning (SB&P) Committee for resolution.
1 In late 2011 , under an agency realignment of governance committees, the Rulemaking Steering Committee was subsumed into the new Strategy, Budget and Planning Committee (SB&P).
Initiated By: ARM-1 Distribution: Electronic
02/12/13 1110.153A
7. Rebaselining Projects. Ifit becomes necessary to rebaseline a previously-approved rulemaking schedule due to factors outside the control ofthe rulemaking team, the Council may do so. Appropriate reasons for changing a schedule include:
a. A change in agency priorities,
b. A significant FAA policy change,
c. A change in scope ofa rule,
d. Lack of needed input from an involved agency,
e. New legislative requirements, or
f. Other unforeseeable constraints outside ofthe control ofthe rulemaking team.
8. Organization.
a. Council: The Council operates under the authority and direction ofthe Associate Administrator for Aviation Safety, A VS-1. Participation on the Council is a key job responsibility of the service/office director or representative, and members serve on a permanent basis. Representatives on the Council are responsible for the agency's overall rulemaking program. The Director ofthe Office ofRulemaking (ARM-1) serves as chairperson.
b. Continuous Improvement Team (CIT): The CIT, a team composed ofmanagers from ARM, Aviation Policy and Plans, and the Office ofthe Chief Counsel, meets quarterly for continuous improvement ofthe quality ofrulemaking documents and the overall rulemaking process. ARM-1 chairs the CIT meetings and presents rulemaking issues and recommendations to the Council when higher-level consideration is needed.
9. Administration.
a. Chairperson Responsibilities
(1) Review Rulemaking Lifecycle Documents (LCDs) to determine agenda for Council meetings,
(2) Distribute meeting agenda and all LCDs that will be considered by the Council prior to each meeting,
(3) Facilitate Council meetings and be responsible for recording and distributing meeting minutes,
(4) Monitor rulemaking projects; bring issues to the Council's attention,
(5) Facilitate the resolution ofdisputes elevated to the Council, and
02/12/13 1110.153A
(6) Make recommendations to the SB&P and document the concerns ofthe Council when it cannot reach consensus regarding resource allocations.
b. Council Member Responsibilities
(1) Submit LCDs 14 calendar days prior to the Council Preparatory meeting unless approval for a late submission is received from ARM-I,
(2) Review LCDs in advance and attend meetings prepared to fully participate, and
(3) Help ensure that rulemaking priorities set by the Council are carried out.
c. Meetings are held at least bimonthly, or as required.
10. Support. The Office ofRulemaking provides staff support for the Council.
11. Effective Date. This Council charter is effective February 12, 2013, which is the filing date of this order. The Council will remain in existence indefinitely, unless revised or terminated.
12. Distribution. This order is distributed to the division level in Washington headquarters, regions and centers, and the branch level in the Aircraft Certification Directorates. ~t{~ Administrator