Radar Vectors
FAA Notice Cancelled Issued Jan 22, 2025 AFS-900 20 pages Copy saved Nov 18, 2026

Notice N 8900.728 Determine Applicant Readiness for Certification

The purpose of this notice is to provide information for and assist Office Managers (OM), Front Line Managers (FLM), or office points of contact (POC) who are working with applicants applying for an Air Carrier Certificate, Operating Certificate, or Air Agency Certificate; or the issuance of management specifications (MSpecs) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) parts 91 subpart K (part 91K), 125, 133, 135, 137, 141, 142, 145, and 147. The scope and intent of this notice is to supplement Federal Aviation Administration (FAA) Order 8900.1, Volume 2, Air Operator and Air Agency Certification and Application Process; and Volume 10, Chapter 12, Certification Services Oversight Process.

This document is cancelled. It may have been replaced. Check the official source before relying on it.

Official source ↗ Open PDF

5. Process.

Distribution: Electronic Only Initiated By: AFS-900

NOTICE

U.S. DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION N 8900.728

National Policy

Effective Date: 1/21/25

Cancellation Date: 1/21/26

SUBJ: Determine Applicant Readiness for Certification

1. Purpose of This Notice. The purpose of this notice is to provide information for and assist Office Managers (OM), Front Line Managers (FLM), or office points of contact (POC) who are working with applicants applying for an Air Carrier Certificate, Operating Certificate, or Air Agency Certificate; or the issuance of management specifications (MSpecs) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) parts 91 subpart K (part 91K), 125, 133, 135, 137, 141, 142, 145, and 147. The scope and intent of this notice is to supplement Federal Aviation Administration (FAA) Order 8900.1, Volume 2, Air Operator and Air Agency Certification and Application Process; and Volume 10, Chapter 12, Certification Services Oversight Process.

Note: This notice replaces Notice N 8900.687, Determine Applicant Readiness for Certification, dated January 19, 2024.

2. Audience. The primary audience for this notice is Flight Standards (FS) Safety Assurance OMs, FLMs, or POCs with Certification Services Oversight Process (CSOP) responsibilities. The secondary audience includes the Safety Standards and Foundational Business offices.

3. Where You Can Find This Notice. You can find this notice on the MyFAA employee website at https://employees.faa.gov/tools_resources/orders_notices and the Dynamic Regulatory System (DRS) at https://drs.faa.gov. Operators and the public can find this notice on the FAA’s website at https://www.faa.gov/regulations_policies/orders_notices and DRS.

4. Background. FS offices responsible for certification use CSOP to assist in the management of certification applications. CSOP provides guidance to FS offices in accepting, sequencing, tracking, and reporting new certification applicant status. FS has seen an increased trend with applicants who are not ready to begin the initial certification process; as a result, this has increased the certification processing time and overall applicant wait time. To help reduce wait time and streamline the approach, FS has initiated a new process to determine applicant readiness for certification prior to being added to the CSOP Applicant List.

5. Process. The Applicant Readiness Checklist for certification was developed as part of the process to streamline Phase 1, Preapplication, and Phase 2, Formal Application; and to ensure applicants enter the initial certification process at Phase 3, Document Compliance. It assists the

5. Process. › b. Determine Applicant Readiness Process. Before an applicant can be…

1/21/25 N 8900.728

OMs, FLMs, or POCs to determine an applicant’s readiness and the acceptance process for an application/applicant to be added to the CSOP Applicant List.

a. Initial Inquiry. The applicant is responsible to prepare themselves for certification. If an applicant is not prepared for the certification application process, the office should direct them to the certification resources at https://www.faa.gov or DRS, or they should consult with other external sources. Some of these sources may include, but are not limited to, industry organizations or associations such as the Aeronautical Repair Station Association (ARSA), the National Business Aviation Association (NBAA), the National Air Transportation Association (NATA), the National Air Carrier Association (NACA), etc. FS personnel should not be the sole providers of education to applicants on what is needed for a successful initial certification process. Furthermore, FS offices should utilize Risk-Based Decision Making (RBDM) in allocating inspector resources during this stage.

b. Determine Applicant Readiness Process. Before an applicant can be added to the CSOP Applicant List, the office must determine if the applicant has submitted items and is ready to begin the initial certification process by using the applicable Applicant Readiness Checklist found in Appendix A.

1/21/25 N 8900.728

Figure 1. New Applicant Readiness Process

Figure 1: picture of page 3Figure 1 · page 3
Picture of the page from the copy saved here

a. For applications submitted prior to October 1, 2022, each office… › (1) For applicants on the Applicant List, update the last official…

1/21/25 N 8900.728

(1) If the preapplication information is received through email, then office personnel will populate the information in the Preapplications tab of the Safety Assurance System (SAS), attach the checklist items, and submit the application (Submitted). If the preapplication information is received through the external portal, it will be received in “Submitted” status (Submitted).

(2) Office personnel will review the preapplication information and determine applicant readiness based on the applicable checklist in Appendix A.

Note: Phases 1 and 2 of the certification process are completed with this step.

(3) If the preapplication information does not meet the requirements of the Applicant Readiness Checklist, then list the requirements the applicant did not meet, document the number of returns (e.g., first return or second return) in the Remarks section, and select “Return” (Returned). This data will provide a historical reference based on the applicant’s readiness and the number of attempts to meet the requirements of the checklist. Additionally, if the preapplication information was submitted through email and does not meet the requirements of the Applicant Readiness Checklist, then list the requirements the applicant did not meet in the checklist and email this information to the applicant. If, after 30 days from the “Return” notification, the applicant has not responded or submitted items, withdraw/terminate them from applicable areas within SAS.

Note: The applicant may correct and resubmit or withdraw their application. Applications in “Returned” status can be edited, resubmitted, or withdrawn by external portal users or office personnel.

(4) If the applicant has met all requirements, accept the application (Accept for RA), perform certification resource analysis, and add to the Applicant List to await FS resources (Applicant List). This data shows the applicant has met the requirements of the checklist and is ready to begin certification.

Note: The certification process begins with Phase 3.

6. Office Actions for Existing Applicants. Existing applicants in SAS can be in the following statuses: “Applicant List,” “Accept for RA,” or “Submitted.”

a. For applications submitted prior to October 1, 2022, each office will contact and provide the Applicant Readiness Checklist to applicants associated with their office within 30 days of the publication of this notice. For all other existing applicants, each office will contact and provide the Applicant Readiness Checklist to applicants associated with their office within 90 days of the publication of this notice. Applicants will have 30 days from notification to submit items on the checklist and/or inform the office of their intent to remain on or continue to the Applicant List. The FS offices may have discretion on this timeframe based upon the applicant’s responsiveness.

(1) For applicants on the Applicant List, update the last official notification date, enter any pertinent information in the Applicant List Comments section, and attach correspondence on the Preapplication Information/CSOP Applicant List page.

7. Disposition.

1/21/25 N 8900.728

(2) For applicants in “Accept for RA” status, enter any pertinent information in the Comments section and attach correspondence on the Preapplication Information/CSOP Resource Analysis page.

(3) For applicants in “Submitted” status, follow subparagraph 5b(3) or 5b(4), as appropriate.

b. For applicants that have submitted checklist items and who intend to remain on or continue to the Applicant List, office personnel will update the last official notification date, enter detailed comments regarding the applicant’s readiness, and attach the Applicant Readiness Checklist and all submitted documents on the Preapplication Information/CSOP Applicant List page.

c. If, after 30 days from notification, the applicant has not responded or submitted checklist items, terminate them from applicable areas within SAS, such as the Applicant List. Ensure detailed justification comments are entered for all terminated applications.

d. Applicants terminated in SAS under this process may resubmit an application for certification and will be required to go through this new process to be placed on the Applicant List. Their original place on the Applicant List will be forfeited and readjusted based on the new date of acceptance. Additionally, applicants who are restarting from previous certification attempts are required to provide additional information to show they have corrected previously identified deficiencies.

Note: During initial certification, members of the certification team and FS personnel should encourage applicants to be prepared. Refer applicants to existing agency policy, guidance, and regulations pertaining to certification (e.g., regulations that specify required contents of a manual).

7. Disposition. Some of the information in this notice will be incorporated into Order 8900.1, Volume 10, Safety Assurance System Policy and Procedures, and other applicable policy before this notice expires. Direct questions or comments concerning the information in this notice to the Safety Analysis and Promotion Division (AFS-900) at [email protected].

Robert M. Ruiz Acting Executive Director, Flight Standards Service

Appendix A. Applicant Readiness Checklist

Appendix A. Applicant Readiness Checklist

Table A-1. Title 14 CFR Part 91 Subpart K (Part 91K) Fractional Ownership

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Statement of intent FAA Order 8900.1, Volume 2, Chapter 5, Section 2, Phase 1—Preapplication

Proposed Schedule of Events (SOE)

The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Fractional ownership program or business plan is complete

Order 8900.1, Volume 2, Chapter 5, Section 2

Management specifications (MSpecs) requested

Order 8900.1, Volume 2, Chapter 5, Section 2; and Volume 3, Chapter 18, Section 2, Operations Safety System

14 CFR § 91.1015

Signed acknowledgment of operational control responsibilities

14 CFR § 91.1013

Included in the program management services contract

Program Operating Manual (POM)

14 CFR § 91.1025

Internal safety reporting and incident/accident response procedures

14 CFR § 91.1021

Cockpit checklist (normal, abnormal, emergency)

14 CFR § 91.1033

Passenger briefing cards 14 CFR § 91.1035

Hazardous materials (hazmat) recognition program

14 CFR § 91.1085

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Pilot safety background checks and procedures

14 CFR § 111.105 14 CFR § 111.135 FAA Order 8000.88, PRIA and PRD Guidance for FAA Inspectors

Drug and alcohol misuse education program

14 CFR § 91.1047

List of owners and associated aircraft

14 CFR § 91.1027

Destination Airport Analysis Program (DAAP)

14 CFR § 91.1037

Proving and/or validation test plan, if applicable

14 CFR § 91.1041

Continuous Airworthiness Maintenance Program (CAMP), if required

14 CFR § 91.1411

Table A-2. Title 14 CFR Part 125 Operators

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

FAA Form 8400-6, Preapplication Statement of Intent

14 CFR § 125.21

Management personnel qualifications

14 CFR § 125.25

Formal Application Letter

Initial Compliance Statement

Policy and Procedures Manual (PPM)

14 CFR § 125.71

List of requested operations specifications (OpSpecs)

Leases, agreements, and contracts, as appropriate, for any required facility, service, aircraft, and equipment

If documentation is unavailable, the intentions should be annotated on the Schedule of Events (SOE).

Deviation requests or authorities granted

14 CFR § 125.3

Proposed SOE The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Hazardous materials (hazmat) procedures and instructions

14 CFR § 125.73

Weight and Balance (W&B) procedures

FAA-H-8083-1, Aircraft Weight and Balance Handbook

Table A-3. Title 14 CFR Part 133 Rotorcraft External-Load Operations

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

FAA Form 8710-4, Rotorcraft External-Load Operator Certificate Application

Does the applicant have available the services of at least one person that holds a Commercial Pilot or Airline Transport Pilot (ATP) Certificate with rating appropriate for the rotorcraft used?

14 CFR § 133.19

Instrument flight rules (IFR)

If applicable, does the applicant have documentation that pilot(s) meet instrument qualifications and currency?

Letter of nomination for designation of Chief Pilot

14 CFR § 133.21

May be the applicant

Letter or lease agreement for the use of at least one rotorcraft

14 CFR § 133.19

Copy of proposed Rotorcraft-Load Combination Flight Manual (RLCFM)

14 CFR § 133.47

If applicable, Class D training program, including initial and recurrent

Table A-4. Title 14 CFR Part 135 Operators

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Title 14 CFR Part 135—Single Pilot or Single Pilot in Command (PIC) (as Applicable)

FAA Form 8400-6, Preapplication Statement of Intent

Compliance statement: sized and scoped for intended operations

FAA Order 8900.1, Volume 2, Chapter 4, Section 1, Phase 1—Preapplication

Applicant must address 14 CFR part 5 Safety Management System (SMS).

List of proposed operations specifications (OpSpecs) with procedures, if applicable

FAA Form 8400-6, Section 1E, No. 10

Category and class of aircraft to be used (type not necessary) representative of aircraft to be used in proposed certification

FAA Form 8400-6, Section 1D, No. 8 (i.e., single engine, multiengine, turboprop, jet, above 12,500, visual flight rules (VFR) only, rotorcraft)

If the applicant is using an Unmanned Aircraft System (UAS), contact the Emerging Technologies Division (AFS-700) for any additional checklist items needed before adding to the Applicant List.

Intent of will or will not carry of hazardous materials (hazmat)

FAA Form 8400-6, Section 1E, No. 10

Hazmat training manual 14 CFR § 135.23(p)

Flight locating procedures

14 CFR § 135.79

Ground deicing procedures

Formal Application Letter

Order 8900.1, Volume 2, Chapter 4, Section 1

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Proposed Schedule of Events (SOE)

The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Named pilot résumé Order 8900.1, Volume 2, Chapter 4, Section 6, Single-Pilot, Single Pilot-in-Command, and Basic Part 135 Operations

Copy of pilot and medical certificate(s)

Corporation papers: legal business name

Sample aircraft discrepancy log

Sample pilot record

Sample flight and duty log

Title 14 CFR Part 135—Nine or Less Basic or Full (in Addition to Single Pilot or

Single PIC)

Aircraft by number and type (include registration if available) and make, model, and series (M/M/S) expected to be used

Deviation or exemption requests, if required

General Operations Manual (GOM)

Training manual

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Management résumés:

• Director of Operations • Director of Maintenance • Chief Pilot

Copy of pilot and medical certificates for Director of Operations and Chief Pilot

Approved Aircraft Inspection Program (AAIP), if required

Title 14 CFR Part 135—Ten or More (in Addition to Single Pilot or Single PIC and

Nine or Less Basic or Full)

Continuous Airworthiness Maintenance Program (CAMP)

General Maintenance Manual (GMM)

14 CFR § 135.427

Table A-5. Title 14 CFR Part 137 Agricultural Aircraft Operations

(Excluding Unmanned Aircraft System (UAS))

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Private or Commercial

Letter of Intent FAA Order 8900.1, Volume 2, Chapter 8, Section 1, The Certification Process of a Part 137 Operator

FAA Form 8710-3, Agricultural Aircraft Operator Certificate Application

Order 8900.1, Volume 2, Chapter 8, Section 1

Private applicant: Private Pilot, Commercial Pilot, or Airline Transport Pilot (ATP) Certificate

Commercial applicant: services of person that holds a Commercial Pilot or ATP Certificate rated for aircraft to be used

14 CFR § 137.19

Proof of availability of at least one aircraft properly certificated, airworthy and equipped for operation

14 CFR § 137.19

Proof of applicant’s knowledge and skills or have services of a chief supervisor with knowledge and skills for aircraft used

14 CFR § 137.19

Commercial only: recordkeeping system/sample form

14 CFR § 137.71

Table A-6. Title 14 CFR Part 141 Pilot Schools

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Letter of Intent FAA Order 8900.1, Volume 2, Chapter 9, Section 1, Safety Assurance System: Initial Certification or Renewal of a Part 141 Pilot School

Safety practices and procedures (manuals)

14 CFR § 141.53

FAA Form 8420-8, Application for Pilot School Certification

14 CFR § 141.13

Training course outlines (TCO)/syllabi

14 CFR § 141.53

Résumé for chief instructor

14 CFR § 141.35

Résumé for assistant chief instructor (optional)

14 CFR § 141.36

Table A-7. Title 14 CFR Part 142 Training Centers

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Letter of Application with corporate/business name (including doing business as (DBA) name), mailing address, telephone number, and email address

Signature(s) per FAA Order 8900.1, Volume 2, Chapter 10, Section 1, Certification of Part 142 Training Centers and the Addition of Satellite Facilities

Order 8900.1, Volume 2, Chapter 10, Section 1

Proposed Schedule of Events (SOE) to include the Training and Simulation Group (AFS-280) evaluation

The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Proposed training curriculum/course

Order 8900.1, Volume 3, Chapter 54, Section 6, Part 142 Training Centers: Evaluate Training Programs, Curricula, Flight Training Equipment, and Recordkeeping Requirements

14 CFR §§ 142.37/142.39

Location of the training center and any proposed satellite centers

Order 8900.1, Volume 3, Chapter 54, Section 6

14 CFR §§ 142.15/142.17

Training records Order 8900.1, Volume 3, Chapter 54, Section 6

14 CFR § 142.73

Proposed instructor and evaluator training program

Including curriculum, courseware, procedures, and any other supporting documentation

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Proposed evaluation authorization(s)

Proposed core and specialty training curriculums

Including associated syllabi, including courseware, procedures, checklists, and any other supporting documentation for the training of students, instructors, and evaluators

Company policy manual(s)

Indicate whether company employs or proposes to employ any person described in 14 CFR § 142.11(e)(2)(i), (ii), or (iii)

Description of a recordkeeping system

If intent is to provide training for a certificate or rating in fewer than the minimum hours prescribed in 14 CFR part 61, a method of demonstrating qualification and ability to provide training

Description of Quality Control (QC) program

Proposed training agreements

Deviation and waiver requests, if applicable

Compliance statement

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

A copy of a purchase contract or adequate lease of flight training equipment that is available for exclusive use, for adequate periods of time

*Must be able to show this within 45 days of certification process start

Order 8900.1, Volume 3, Chapter 54, Section 6

14 CFR § 142.59

Certification of a training center under 14 CFR part 142 requires the use of at least one full flight simulator (FFS) or Level 6 or 7 flight training device (FTD). An application that proposes to conduct training, testing, and checking using aircraft only will not be accepted.

Description of the applicant’s training facilities, equipment, and qualifications of personnel to be used

*Must be able to show this within 45 days of certification process start

Management qualifications stated in specific terms

*Must be able to show this within 45 days of certification process start

Table A-8. Title 14 CFR Part 145 Repair Stations

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

FAA Form 8400-6, Preapplication Statement of Intent

Description of housing, facilities, and proposed personnel numbers, if available

FAA Form 8400-6, Section 1E, No. 10

14 CFR § 145.103

If unavailable, annotate the intentions on the Schedule of Events (SOE).

Stated intent for hazardous materials (hazmat) employer, as defined under Title 49 of the Code of Federal Regulations (49 CFR) § 171.8

FAA Form 8400-6, Section 1E, No. 10

14 CFR § 145.53(c)

Repair Station Manual (RSM)

14 CFR § 145.207

Quality Control Manual (QCM)

14 CFR § 145.211(c)

Training program manual

14 CFR § 145.163

Forms manual (if not included in any other manual)

14 CFR § 145.211(c)(3)

A list by type and make and model (M/M), as appropriate, of each article for which application is made

14 CFR § 145.51(a)(3)

List of contract maintenance functions

14 CFR § 145.217

FAA Form 8310-3, Application for Repair Station Certificate and/or Rating

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

Proposed SOE The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Capability list (CL), if applicable

14 CFR § 145.215

Letter(s) of recommendation and applications for any proposed repairman (FAA Form 8610-3, Airman Certificate and/or Rating Application – Repairman)

Limited ratings: process specifications, if applicable

14 CFR § 145.61(c)

Table A-9. Title 14 CFR Part 147 Aviation Maintenance Technician Schools (AMTS)

Item

Received/ Submitted (Y, N, N/A)

Verified by Initials/Date Reference/Remarks

FAA Form 8400-6, Preapplication Statement of Intent

FAA Form 8310-6, Aviation Maintenance Technician School Certificate and Ratings Application

14 CFR § 147.5

Proposed Schedule of Events (SOE)

The SOE must include a timeline based on calendar days (e.g., 30 days) as opposed to actual dates for the acquisition of facilities, aircraft leases, and equipment after initial certification begins.

Letter of compliance (optional)

Description of facilities 14 CFR § 147.5(b)(1)

Description of equipment and materials used

14 CFR § 147.5(b)(1)

Description of curriculum basis

14 CFR § 147.5(b)(2)

Description of instructor requirements

14 CFR § 147.5(b)(3) 14 CFR § 147.19

Curriculum 14 CFR § 147.17(a)(1)

Evidence of accreditation, if applicable

14 CFR § 147.23(a)(1)

AMTS Quality Control System (QCS), if applicable

14 CFR § 147.23

Exemption requests or authorities granted, if applicable