InFO 18002 Removal and Reinstallation of Helicopter Flight Crew Doors
Distributed by: Flight Standards
http://www.faa.gov/other_visit/aviation_industry/airline_operators/airline_safety/info … An InFO contains valuable information for operators that should help them meet certain administrative, regulatory, or operational requirements, with relatively low urgency or impact on safety. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way. This document is intended only to provide clarity to the public regarding existing requirements under the law or agency policies. Subject: Removal and Reinstallation of Helicopter Flight Crew Door. Purpose: This InFO informs Title 14 of the Code of Federal Regulations (14 CFR) part 91, 133, and 137 helicopter air operators of the proper methods, techniques, and approvals in the removal and reinstallation of helicopter flightcrew doors. Background: Many helicopter operators have requested exemption from 14 CFR Part 43.3(h) and/or (i), which requires pilots to be properly trained in the removal and reinstallation of flightcrew doors when away from base with no maintenance support available.
Discussion: The variety of operations that may involve removal and reinstallation of flightcrew doors include firefighting, search and rescue, power and pipeline patrols/survey, aerial photography, filming, external load transport, and surveying and/or mapping. Due to the nature of these operations, it is not possible to travel with a mechanic on board to perform the door removal and reinstallation. For example, in an initial detection flight in fire operations, a helicopter crew may proceed to a staging area, remove the doors, then search for smoke or signs of a fire. After spotting the fire, the operator may return to the staging area, reinstall the doors, and perform firefighting operations. The Federal Aviation Administration (FAA) has determined that an appropriately trained pilot could safely remove and reinstall a supplemental type certificated (STC) flightcrew door with a quick release pin and door hinge assembly. Therefore, an exemption for flightcrew door removal and reinstallation is not required.
However, removal and reinstallation of the rearmost cargo door is more complex and poses a greater risk to safety because of the risk of foreign object debris (FOD) damage to critical helicopter parts. As a result of this greater risk, an exemption for removal and reinstallation of the rearmost cargo door would be necessary from part 43. If an owner or operator wishes to petition for a more tailored relief of the part 43 requirement for rear cargo doors, its petition should:
1. Describe the specific training method;
InFO
Information for Operators
U.S. Department of Transportation Federal Aviation Administration
InFO 18002 Original Issue:04/12/18 Revised 9/29/22 Flight Standards Service
Washington, DC
Distributed by: Flight Standards
2. Show how a grant of exemption would be in the public interest; and
2. Show how a grant of exemption would be in the public interest; and
3. Explain how the operator would observe a level of safety equivalent to the cargo door removal and reinstallation by certificated mechanics. Recommended Action: Helicopter operators who conduct operations requiring flightcrew door removal and reinstallation should:
1. Review specific aircraft type certificate data sheet for flightcrew door removed operation;
2. Review installed STCs for flightcrew door removal operations, if applicable;
3. Review the approved or accepted operator’s manual for conducting flightcrew door removal and re-installation operations to ensure process and procedures are fully understood;
4. Develop a training program for pilots with content specific to the removal, installation, and inspection of flightcrew doors by aircraft type. Submit the training program to the responsible Flight Standards Office for review and approval. Contact: Questions or comments regarding this InFO should be directed to the Aircraft Maintenance Division at (202) 267-1675, or via email at [email protected].