Radar Vectors
Handbook Current Issued Jul 9, 2026 Aeronautical Information Services 140 pages Copy saved Nov 19, 2026

Aeronautical Chart Users' Guide

The Chart Users' Guide is updated when there is new chart symbology or when there are changes in the depiction of information and/or symbols on the charts.

Official source ↗ Open PDF

Aeronautical Information Services Aeronautical Chart Users’ Guide

Effective as of 9 July 2026

Federal Aviation Administration

TABLE OF CONTENTS

TABLE OF CONTENTS … 3

INTRODUCTION … 6 KEEP YOUR CHARTS CURRENT … 6 EFFECTIVE DATE OF CHART USERS’ GUIDE AND UPDATES … 6 COLOR VARIATION … 6 REPORTING CHART DISCREPANCIES … 6

TABLE OF CONTENTS

WHAT’S NEW? … 8 VFR CHARTS … 8 IFR ENROUTE CHARTS … 8 TERMINAL PROCEDURE PUBLICATION (TPP) … 8

EXPLANATION OF VFR TERMS AND SYMBOLS … 10 WATER FEATURES (HYDROGRAPHY) … 10 LAND FEATURES (TERRAIN) AND OBSTRUCTIONS … 10 LAND FEATURES - MOUNTAIN PASSES … 13 RADIO AIDS TO NAVIGATION … 14 AIRPORTS … 14 AIRSPACE … 16 FOREIGN AREAS … 19 TERMINAL AREA CHART (TAC) COVERAGE … 20 INSET AND SPECIAL CHART COVERAGE … 20 CHART TABULATIONS … 20

VFR SECTIONAL AND TERMINAL AREA CHARTS … 23 AIRPORTS … 23 RADIO AIDS TO NAVIGATION … 25 AIRSPACE INFORMATION … 26 NAVIGATIONAL AND PROCEDURAL INFORMATION … 32 CULTURE … 34 HYDROGRAPHY … 37 RELIEF … 40

VFR FLYWAY PLANNING CHARTS … 43 GENERAL INFORMATION … 43 AIRPORTS … 43 RADIO AIDS TO NAVIGATION … 43 AIRSPACE INFORMATION … 44 NAVIGATIONAL AND PROCEDURAL INFORMATION … 47 CULTURE … 48 BOUNDARIES … 48 HYDROGRAPHY … 48 RELIEF … 48

FAA Chart Users’ Guide - Table of Contents

TABLE OF CONTENTS

HELICOPTER ROUTE CHARTS … 50 GENERAL INFORMATION … 50 AIRPORTS … 50 RADIO AIDS TO NAVIGATION … 51 AIRSPACE INFORMATION … 52 NAVIGATIONAL AND PROCEDURAL INFORMATION … 55 CULTURE … 56

CARIBBEAN VFR AERONAUTICAL CHARTS (CAC) … 58

AIRSPACE … 60

EXPLANATION OF IFR ENROUTE TERMS … 63 AIRPORTS … 63 RADIO AIDS TO NAVIGATION … 65 AIRSPACE INFORMATION … 67 INSTRUMENT AIRWAYS … 68 FOREIGN AREAS … 73 TERRAIN CONTOURS ON AREA CHARTS … 73 AIRPORTS … 75

IFR ENROUTE LOW / HIGH ALTITUDE SYMBOLS (U.S., PACIFIC AND ALASKA CHARTS) … 75 RADIO AIDS TO NAVIGATION … 76 AIRSPACE INFORMATION … 81 NAVIGATIONAL AND PROCEDURAL INFORMATION … 94 CULTURE … 95 HYDROGRAPHY … 95 TOPOGRAPHY … 95

U.S. TERMINAL PROCEDURES PUBLICATION … 97 EXPLANATION OF TPP TERMS AND SYMBOLS … 97 INSTRUMENT APPROACH PROCEDURE CHART … 98 PLANVIEW … 105 PROFILE VIEW … 116 LANDING MINIMUMS … 120 AIRPORT DIAGRAMS … 122 DEPARTURE PROCEDURES (DPs) … 124 STANDARD TERMINAL ARRIVAL (STARs) CHARTS … 125 CHARTED VISUAL FLIGHT PROCEDURE (CVFP) CHARTS … 126

U.S. TERMINAL PROCEDURES PUBLICATION SYMBOLS … 127 GENERAL INFORMATION … 127 PLANVIEW SYMBOLS … 127 PROFILE VIEW … 129 STANDARD TERMINAL ARRIVAL (STAR) CHARTS … 130

FAA Chart Users’ Guide - Table of Contents

TABLE OF CONTENTS

DEPARTURE PROCEDURE (DP) CHARTS … 131 AIRPORT DIAGRAM/AIRPORT SKETCH … 132 APPROACH LIGHTING SYSTEM … 133

REFERENCES … 136

ABBREVIATIONS … 138

FAA Chart Users’ Guide - Table of Contents

INTRODUCTION

INTRODUCTION

This Chart Users’ Guide is an introduction to the Federal Aviation Administration's (FAA) aeronautical charts and publications. It is useful to new pilots as a learning aid, and to experienced pilots as a quick reference guide.

The FAA is the source for all data and information utilized in the publishing of aeronautical charts through authorized publishers for each stage of Visual Flight Rules (VFR) and Instrument Flight Rules (IFR) air navigation including training, planning, departures, enroute (for low and high altitudes), approaches, and taxiing charts. Digital charts are available online at:

• VFR Charts • IFR Charts • Terminal Procedures Publication • Chart Supplements

The FAA Aeronautical Information Manual (AIM) Pilot/Controller Glossary defines all terms and abbreviations used throughout this publication. Unless otherwise indicated, miles are nautical miles (NM), altitudes indicate feet above Mean Sea Level (MSL), and times used are Coordinated Universal Time (UTC).

Notices to Airmen (NOTAMs) alert pilots to time-critical aeronautical information that is either temporary or not sufficiently known in advance to permit publication on aeronautical charts or in other operational publications. Pilots can access NOTAM information via Flight Service Stations (FSS) or online via NOTAM Search at https://notams.aim.faa.gov/notam­ Search/.

In addition to NOTAMs, the Safety Alerts/Charting Notices page of the Aeronautical Information Services website is also useful to pilots.

KEEP YOUR CHARTS CURRENT

Aeronautical information changes rapidly, so it is important that pilots check the effective dates on each aeronautical chart and publication. To avoid danger, it is important to always use current editions and discard obsolete charts and publications.

To confirm that a chart or publication is current, refer to the next scheduled edition date printed on the cover. In addition to the published edition dates, the time 0901Z is specified as the changeover time for updated aeronautical information and products in the United States. The 0901Z time of day, selected due to its historically lower overall volume of air traffic, is crucial for both pilots and air traffic controllers to ensure all aircraft are using the same current chart or publication.

Pilots should also check NOTAMs for important updates between chart and publication cycles that are essential for safe flight.

EFFECTIVE DATE OF CHART USERS’ GUIDE AND UPDATES

All information in this guide is effective as of 9 July 2026. All graphics used in this guide are for educational purposes. Chart symbology may not be to scale. Please do not use them for flight navigation.

COLOR VARIATION

Although the digital files are compiled in accordance with charting specifications, the final product may vary slightly in appearance due to differences in printing techniques/processes and/or digital display techniques.

REPORTING CHART DISCREPANCIES

Your experience as a pilot is valuable and your feedback is important. We make every effort to display accurate information on all FAA charts and publications, so we appreciate your input. Please notify us concerning any requests for changes, or potential discrepancies you see while using our charts and related products.

Aeronautical Inquires: https://www.faa.gov/air_traffic/ flight_info/aeronav/aero_data/Aeronautical_Inquiries/

FAA Chart Users’ Guide - Introduction

FAA Chart Users’ Guide - Introduction

WHAT’S NEW?

WHAT’S NEW? Update as of 9 July 2026

The following charting items have been added to the Chart Users’ Guide since the Guide was last published on 22 January 2026:

VFR CHARTS

On the March 19, 2026 publication date, weather camera locations were added to the Continental US VFR Sectional and Helicopter Route Charts. Previously, weather camera locations were only charted in Alaska. This change also incorporated updated symbology.

IFR ENROUTE CHARTS

No Significant Changes Applied

TERMINAL PROCEDURE PUBLICATION (TPP)

Airport Diagram Magnetic Variation Depiction

A new process for publishing magnetic variation values has been implemented on FAA airport diagrams published in the TPP and Chart Supplement. To ensure alignment with instrument flight procedures, the magnetic variation published on FAA airport diagrams has been updated to align with the values documented on FAA Form 8260. This change ensures alignment across all FAA aeronautical charts and publications. Airport diagrams may display a year stamp based on the procedure date (e.g., “2015”) rather than the last calculation date using the WMM (e.g., “2025”). In some geographic areas, differences between the two methods may be significant, but the new process will ensure consistency with existing source data. (See Charting Notice 26-01)

Format Changes for ICA Criteria

The FAA has redefined the initial climb area (ICA) criteria used to evaluate and identify the obstacles that penetrate the 40:1 obstacle clearance surface. This update removes the requirement to publish the specific location of each individual or group of low, close-in obstacles on Standard Instrument Departures (SIDs) and Obstacle Departure Procedures (DPs). Instead, when low, close-in obstacles are identified for a departure runway, they will now be documented by the distance of the closest obstacle from the departure end of runway (DER). This change reduces the overall quantity of listed low, close-in obstacle notes.

To ensure the pilot knows which evaluation was accomplished, the charting will be different by bolding certain headers and runway information to indicate the new ICA criteria has been used (See page 125 and Charting Notice 26-03).

FAA Chart Users’ Guide - What’s New

FAA Chart Users’ Guide - What’s New

EXPLANATION OF VFR TERMS AND SYMBOLS

EXPLANATION OF VFR TERMS AND SYMBOLS

This chapter covers the Sectional Aeronautical Chart (Sectional). These charts include the most current data at a scale of (1:500,000), which is large enough to be read easily by pilots flying by sight under Visual Flight Rules. Sectionals are named after a major city within its area of coverage.

The chart legend includes aeronautical symbols and information about drainage, terrain, the contour of the land, and elevation. You can learn to identify aeronautical, topographical, and obstruction symbols (such as radio and television towers) by using the legend.

A brief description next to a small black square indicates the exact location for many of the landmarks easily recognized from the air, such as stadiums, pumping stations, refineries, etc. A small black open circle with descriptive type indicates oil, gas or mineral wells. A small black circle with descriptive type indicates water, oil or gas tanks. The scale for some items may be increased to make them easier to read on the chart.

EXPLANATION OF VFR TERMS AND SYMBOLS › WATER FEATURES (HYDROGRAPHY)

Aeronautical Information Services' charts are prepared in accordance with specifications of the Interagency Air Committee (IAC) and are approved by representatives of the Federal Aviation Administration (FAA) and the Department of Defense (DoD).

WATER FEATURES (HYDROGRAPHY)

Water features are depicted using two tones of blue, and are considered either "Open Water" or "Inland Water." "Open Water," a lighter blue tone, shows the shoreline limitations of all coastal water features at the average (mean) high water levels for oceans and seas. Light blue also represents the connecting waters like bays, gulfs, sounds and large estuaries.

Exceptionally large lakes like the Great Lakes, Great Salt Lake, and Lake Okeechobee, etc., are considered Open Water features. The Open Water tone extends inland as far as necessary to adjoin the darker blue "Inland Water" tones. All other bodies of water are marked as "Inland Water" in the darker blue tone.

EXPLANATION OF VFR TERMS AND SYMBOLS › LAND FEATURES (TERRAIN) AND OBSTRUCTIONS

LAND FEATURES (TERRAIN) AND OBSTRUCTIONS

The elevation and configuration of the Earth's surface is important to pilots. Our Aeronautical Information Specialists are devoted to showing the contour of the earth and any obstructions clearly and accurately on our charts. We use five different techniques: contour lines, shaded relief, color tints, obstruction symbols, and Maximum Elevation Figures (MEF).

1. Contour lines join points of equal elevation. On Sectionals, basic contours are spaced at 500' intervals. Intermediate contours are typically at 250' intervals in moderately level or gently rolling areas. Auxiliary contours at 50', 100', 125', or 150' intervals occasionally show smaller relief features in areas of relatively low relief. The pattern of these lines and their spacing gives the pilot a visual concept of the terrain. Widely spaced contours represent gentle slopes, while closely spaced contours represent steep slopes.

2. Shaded relief shows how terrain may appear from the air. Shadows are shown as if light is coming from the northwest, because studies have shown that our visual perception has been conditioned to this view.

FAA Chart Users’ Guide - VFR Terms and Symbols

FAA Chart Users’ Guide - VFR Terms and Symbols

3. Different color tints show bands of elevation relative to sea level. These colors range from light green for the lower elevations, to dark brown for the higher elevations.

4. Obstruction symbols show man made vertical features that could affect safe navigation. The FAA maintains a database of obstacles. Aeronautical Specialists evaluate each obstacle based on charting specifications before adding it to a a visual chart. When a Specialist is not able to verify the position or elevation of an obstacle, it is marked UC, meaning it is "under construction" or being reported, but has not been verified.

The FAA uses a Digital Obstacle File (DOF) to collect and disseminate data. Because land and obstructions frequently change, the source data on obstructions and terrain is occasionally incomplete or not accurate enough for use in aeronautical publications. For example, when the FAA receives notification about an obstruction, and there is insufficient detail to determine its position and elevation, the FAA Flight Edit Program conducts an investigation.

The Flight Edit crew visually verifies the cultural, topographic, and obstacle data. Charts are generally flightchecked every four years. This review includes checking for any obstruction that has been recently built, altered, or dismantled without proper notification.

Wind Turbines.

Obstacles 1000’ AGL

or greater.

Obstacles less than

1000’ AGL. Sectional Charts and Terminal Area (TACs) typically show man-made obstacles extending more than 200' Above Ground Level (AGL), or more than 299' AGL in yellow city tint. Obstacles may be lit or unlit. Features considered to be hazardous obstacles to low-level flight are; smokestacks, tanks, factories, lookout towers, antennas, and wind turbines, etc.

Man-made features used by FAA Air Traffic Control as checkpoints use a graphic symbol shown in black with the required elevation data in blue. The elevation of the top of the obstacle above Mean Sea Level (MSL) and the height of the structure (AGL) is also indicated (when known or can be reliably determined by a Specialist). The AGL height is in parentheses below the MSL elevation. In extremely congested areas, the FAA typically omits the AGL values to avoid confusion.

Group Obstacle Symbol

Whenever possible, the FAA depicts specific obstacles on charts. However, in high-density areas like city complexes, only the highest obstacle is represented on the chart using the group obstacle symbol to maximize legibility.

If space is available the AGL

height of the obstruction is

shown in parentheses.

Obstacles under construction are indicated by placing the letters UC adjacent to the obstacle type.

Guy wires may extend outward from obstacles.

Wind turbines with high intensity

lighting.

Obstacles with high-intensity strobe lighting systems may operate part-time or by proximity activation and are shown as follows:

2894 UC

Concentrated obstructions of wind turbine farms shall be portrayed by an overlying hatched area and dotted outline to represent the approximate parameters of the farm. One or more single turbine symbols will populate the farm. A boxed elevation figure representing the MSL elevation of the highest wind turbine within the area shall be placed inside the farm or, if space is limited, just outside. Pilots are reminded that wind turbine blades and/or blade tips are not lighted. Wind turbine obstruction lights are located on top of the nacelle (generator) at the hub of wind turbines, which in some cases can be 200-300’ below the rotating blade tips.

5. The Maximum Elevation Figure (MEF) represents the highest elevation within a quadrant, including terrain and other vertical obstacles (towers, trees, etc.). A quadrant on Sectionals is the area bounded by ticked lines dividing each 30 minutes of latitude and each 30 minutes of longitude. MEF figures are rounded up to the nearest 100' value and the last two digits of the number are not shown.

MEFs over land and open water areas are used in areas containing man-made obstacles such as oil rigs.

In the determination of MEFs, the FAA uses extreme care to calculate the values based on the existing elevation data shown on source material. Aeronautical Information Specialists use the following procedure to calculate MEFs:

MEF - Man-made Obstacle

When a man-made obstacle is more than 200' above the highest terrain within the quadrant:

1. Determine the elevation of the top of the obstacle above MSL.

2. Add the possible vertical error of the source material to the above figure (100’ or 1/2 contour interval when interval on source exceeds 200’. U.S. Geological Survey Quadrangle Maps with contour intervals as small as 10’ are normally used).

3. Round the resultant figure up to the next higher hundred-foot level.

Example:

Elevation of obstacle top (MSL) 2649

Possible obstacle error +100

equals 2749

Raise to the following 100’ level 2800

Maximum Elevation Figure (MEF)

FAA Chart Users’ Guide - VFR Terms and Symbols

FAA Chart Users’ Guide - VFR Terms and Symbols

MEF - Natural Terrain Feature or Natural Vertical Obstacle

When a natural terrain feature or natural vertical obstacle (e.g. a tree) is the highest feature within the quadrangle:

1. Determine the elevation of the feature.

2. Add the possible vertical error of the source to the above figure (100’ or 1/2 the contour interval when interval on source exceeds 200’).

3. Add a 200’ allowance for uncharted natural or manmade obstacles. Chart specifications don’t require the portrayal of obstacles below minimum height.

4. Round the figure up to the next higher hundredfoot level.

Example:

Elevation of obstacle top (MSL) 13161

Possible vertical error +100

Obstacle Allowance +200

equals 13461

Raise to the following 100’ level 13500

Maximum Elevation Figure (MEF)

Pilots should be aware that while the MEF is based on the best information available to the Specialist, the figures are not verified by field surveys. Also, users should consult the Aeronautical Information Services website to ensure that your chart has the latest MEF data available.

EXPLANATION OF VFR TERMS AND SYMBOLS › LAND FEATURES - MOUNTAIN PASSES

LAND FEATURES - MOUNTAIN PASSES

The Mountain Pass symbol does not indicate a recommended route or direction of flight, and pass elevation does not indicate a recommended clearance altitude. Hazardous flight conditions may exist within and near mountain passes. For high-traffic mountain passes, VFR Checkpoints may be provided to increase situational awareness by indicating key landmarks inside confined terrain. A collocated VFR Waypoint and Checkpoint may be provided to assist with identifying natural entry points for commonly flown mountain passes.

EXPLANATION OF VFR TERMS AND SYMBOLS › RADIO AIDS TO NAVIGATION

RADIO AIDS TO NAVIGATION

On VFR Charts, information about radio aids to navigation (NAVAID) are boxed, as illustrated. Duplication of data is avoided. When two or more radio aids in a general area have the

Weather Camera

same name with different frequencies, Tactical Air Navigation (TACAN) channel numbers, or identification letters, and no misinterpretation can result, the name of the radio aid may be indicated only once within the identification box. Very High Frequency/Ultra High Frequency (VHF/UHF) NAVAID names and identification boxes (shown in blue) take precedence. Only those items that differ (e.g., frequency, Morse Code) are repeated in the box in the appropriate color. The choice of separate or combined boxes is made in each case on the basis of economy of space and clear identification of the radio aids.

A NAVAID that is physically located on an airport may not always be represented as a typical NAVAID symbol. A small open circle indicates the NAVAID location when collocated with an airport icon.

The type of NAVAID will be identified by: "VOR," (VHF Omni-Directional Range) "VORTAC" (VOR Tactical Aircraft Control), "VOR-DME," (VOR-Distance Measuring Equipment) or “DME” (Distance Measuring Equipment) positioned on and breaking the top line of the NAVAID box.

DMEs are shown without the compass rose.

EXPLANATION OF VFR TERMS AND SYMBOLS › AIRPORTS

AIRPORTS

Airports in the following categories are charted as indicated (additional symbols are shown later in this Section). Public use airports:

Hard-surfaced runways greater than 8069’ or some multiple runways less than 8069’

Hard-surfaced runways 1500’ to 8069’

Other than hard-surfaced runways

Seaplane bases

Military airports:

Other than hard-surfaced runways

Foreign airports:

Hard-surfaced runways are depicted the same as public-use airports.

U.S. military airports are identified by abbreviations such as AAF (Army Air Field), AFB (Air Force Base), MCAS (Marine Corps Air Station), NAS (Naval Air Station), NAV (Naval Air Facility), and NAAS (Naval Auxiliary Air Station).

Fuel Available:

Fuel availability indicated by use of tick marks around the basic airport symbol. Consult Chart Supplement for details and availability.

Other airports with or without fuel:

FAA Chart Users’ Guide - VFR Terms and Symbols

FAA Chart Users’ Guide - VFR Terms and Symbols

Airports are plotted in their true geographic position unless the symbol conflicts with a NAVAID at the same location. In such cases, the airport symbol will be displaced, but the relationship between the airport and the NAVAID will be retained. When a waypoint is collocated with a towered airport, the waypoint symbol will not be charted and the waypoint name followed by (WP) will be shown leadered to the waypoint true location. When depicting a seaplane base, the eye of the anchor symbol will be charted as close to the docking area as possible, with the remainder of the symbol in the water.

Airports are identified by their official FAA designated name.

UNICOM

The elevation of an airport is the highest point on the usable portion of the landing areas. Runway length is the length of the longest active runway, including displaced thresholds and excluding overruns. Runway length is shown to the nearest 100', using 70 as the rounding point; a runway 8070' in length is charted as 81, while a runway 8069' in length is charted as 80. If an airport has waterways, it will be indicated by a seaplane base symbol and additional elevation, lighting, and length information under primary airport information.

Flight Service Station on field Elevation in feet

Airports where fixed wing special VFR operations are prohibited (shown above airport name) FAR 91

Lighting in operation Sunset to Sunrise

Indicates FAR 93 Special Air Traffic Rules and Airport Traffic Pattern

Lighting limitations exist; refer to Chart Supplement

Location Identifier Length of longest runway in hundreds of feet; usable length may be less

ICAO Location Identifier Aeronautical advisory station

Control Tower (CT) - primary frequency Runways with Right Traffic Patterns (public use)

Star indicates operation part-time. See tower frequencies tabulation for hours of operation

See Chart Supplement

Follows the Common Traffic Advisory Frequency (CTAF)

VFR Advisory Service Shown when ATIS is not available and frequency is other than the primary CT frequency

Automatic Terminal Information Services Weather Camera

Automatic Flight Information Service Airport of Entry

Automated Surface Weather Observing Systems; shown when full-time ATIS is not available

When information is lacking, the respective character is replaced by a dash. Lighting codes refer to runway edge lights and may not represent the longest runway or full length lighting.

Airports with Control Towers (CT) and their related data are shown in blue. All other airports and their related data are shown in magenta. The symbol indicates that runway lights are on from dusk to dawn. indicates that the pilot must consult the Chart Supplement to determine runway lighting limitations, such as: available on request (by radio-call, letter, phone, etc), part-time lighting, or pilot/airport controlled lighting. Lighting codes refer to runway edge lights. The lighted runway may not be the longest runway available, and lights may not be illuminated along the full length of the runway. The Chart Supplement has a detailed description of airport and air navigation lighting aids for each airport. A dash represents no runway edge lights.

The symbol indicates the existence of a rotating or flashing airport beacon operating from dusk to dawn. The Aeronautical Information Manual (AIM) thoroughly explains the types and uses of airport lighting aids.

Right traffic information is shown using the abbreviation 'RP' for right pattern, followed by the appropriate runway number(s) (RP 18). Special conditions or restrictions to the right pattern are indicated by the use of an asterisk (*RP) to direct the pilot to the Chart Supplement for special instructions and/or restrictions.

The type “OBJECTIONABLE” associated with an airport symbol indicates that an objectionable airspace determination has been made for the airport per FAA JO 7400.2 Section 4, Airport Charting and Publication of Airport Data. Objectionable airspace determinations are based upon a number of factors including conflicting traffic patterns with another airport, hazardous runway conditions, or natural or man-made obstacles in close proximity to the landing area. FAA Regional Airports Offices are responsible for airspace determinations. Address any challenges to objectionable airspace determinations to your FAA Regional Airports Office.

EXPLANATION OF VFR TERMS AND SYMBOLS › AIRSPACE

AIRSPACE

CONTROLLED AIRSPACE

Controlled airspace consists of those areas where some or all aircraft may be subject to air traffic control, such as: Class A, Class B, Class C, Class D, Class E Surface (SFC) and Class E Airspace.

Class A Airspace within the United States extends from 18,000' up to FL600. While visual charts do not depict Class A, it is important to note its existence.

Class B Airspace is shown on the Sectional Aeronautical Chart (Sectional) and Terminal Area Chart (TAC). The MSL ceiling and floor altitudes of each sector are shown in solid blue figures with the last two zeros omitted. Floors extending "upward from above" a certain altitude are preceded by a (+). Operations at and below these altitudes are outside of Class B Airspace. Radials and arcs used to define Class B are prominently shown on TACs. Detailed rules and requirements associated with the particular Class B are shown. The name by which the Class B is shown as for example.

Class C Airspace is shown on Sectionals and TACs. The MSL ceiling and floor altitudes of each sector are shown in solid magenta figures with the last two zeros eliminated.

A ceiling value of “T” indicates the ceiling is to, but not including, the floor of the overlying Class B airspace.

Surface.

Class C Airspace is identified by name:

Separate notes, enclosed in magenta boxes, give the approach control frequencies to be used by arriving VFR aircraft to establish two-way radio communication before entering the Class C (generally within 20 NM):

Class C operating less than continuous is indicated by the following note:

Class D Airspace is identified with a blue dashed line. Class D operating less than continuous is indicated by the following note:

Ceilings of Class D are shown as follows:

A minus in front of the figure is used to indicate "from surface to, but not including..."

FAA Chart Users Guide - VFR Terms and Symbols

FAA Chart Users’ Guide - VFR Terms and Symbols

Class E Surface (SFC) Airspace is symbolized with a magenta dashed line. Class E (SFC) operating less than continuous is indicated by the following note:

Class E Airspace exists at 1200' AGL unless designated otherwise. The lateral and vertical limits of all Class E, (up to, but not including 18,000') are shown by narrow bands of vignette on Sectionals and TACs.

Controlled airspace floors of 700' above the ground are defined by a magenta vignette; floors other than 700' that laterally abut uncontrolled airspace (Class G) are defined by a blue vignette; differing floors greater than 700' above the ground are annotated by a symbol and a number indicating the floor.

If the ceiling is less than 18,000' MSL, the value (preceded by the word "ceiling") is shown along the limits of the controlled airspace. These limits are shown with the same symbol indicated above.

UNCONTROLLED AIRSPACE

Class G Airspace within the United States extends up to 14,500' Mean Sea Level. At and above this altitude is Class E, excluding the airspace less than 1500' above the terrain and certain special use airspace areas.

SPECIAL USE AIRSPACE

Special Use Airspace (SUA) confines certain flight activities and restricts entry, or cautions other aircraft operating within specific boundaries. Except for Controlled Firing Areas, SUA areas are depicted on VFR Charts. Controlled Firing Areas are not charted because their activities are suspended immediately when spotter aircraft, radar, or ground lookout positions indicate an aircraft might be approaching the area. Nonparticipating aircraft are not required to change their flight paths. SUA areas are shown in their entirety (within the limits of the chart), even when they overlap, adjoin, or when an area is designated within another area. The areas are identified by type and identifying name/ number, and are positioned either within or immediately adjacent to the area.

* Alert Areas do not extend into Class A, B, C and D airspace, or Class E airport surface areas.

OTHER AIRSPACE AREAS

Mode C Required Airspace (from the surface to 10,000' MSL) within a 30 NM radius of the primary airport(s) for which a Class B is designated, is depicted by a solid magenta line.

MO

DE

C

&

AD

S-

B

OU

T

30

N

M

Mode C is required, but not depicted for operations within and above all Class C up to 10,000' MSL.

Enroute Mode C requirements (at and above 10,000' MSL except in airspace at and below 2500' AGL) are not depicted. See FAR 91.215 and the AIM.

FAR 93 Airports and heliports under Federal Aviation Regulation 93 (FAR 93), (Special Air Traffic Rules and Airport Traffic Patterns), are shown by "boxing" the airport name.

FAR 91 Airports where fixed wing special visual flight rules operations are prohibited (FAR 91) are shown with the type "NO SVFR" above the airport name.

Miscellaneous Activity Areas are indicated with the symbols illustrated on p. 31. The charting of a symbol in the area of an airport indicates both miscellaneous activity and regular air operations may be present at these locations. Due to the wide range of hazards associated with these areas, pilots are expected to check NOTAMs prior to flight for additional information regarding the airspace.

National Security Areas indicated with a broken magenta line and Special Flight Rules Areas (SFRAs) indicated with the following symbol: , consist of airspace with defined vertical and lateral dimensions established at locations where there is a requirement for increased security and safety of ground facilities. Pilots should avoid flying through these depicted areas. When necessary, flight may be temporarily prohibited.

The Washington DC Flight Restricted Zone (FRZ) is related to National Security. It is depicted using the Prohibited/ Restricted/Warning Area symbology and is located within the SFRA. It is defined as the airspace within approximately a 13 to 15 NM radius of the DCA VOR-DME. Additional requirements are levied upon aviators requesting access to operate inside the National Capital Region.

Temporary Flight Restriction (TFR) Areas Relating to National Security are indicated with a broken blue line

. A Temporary Flight Restriction (TFR) is a type of Notice to Airmen (NOTAM). A TFR defines an area where air travel is restricted due to a hazardous condition, a special event, or a general warning for the entire airspace. The text of the actual TFR contains the fine points of the restriction. It is important to note that only TFRs relating to National Security are charted.

Air Defense Identification Zones (ADIZs) are symbolized using the ADIZ symbol: . As defined in Code of Federal Regulations 14 (CFR 14) Part 99, an ADIZ is an area in which the ready identification, location, and control of all aircraft is required in the interest of national security. ADIZ boundaries include Alaska, Hawaii, Guam and the Contiguous U.S.

National Defense Airspace Temporary Flight Restriction (TFR) Areas are bounded with cross hatching:

. These areas include airspace that is subject to routine TFRs published as NOTAMs that have a 12+ month duration.

Terminal Radar Service Areas (TRSAs) are shown in their entirety, symbolized by a screened black outline of the entire area including the various sectors within the area .

The outer limit of the entire Terminal Radar Service Areas (TRSA) is a continuous screened black line. The various sectors within the TRSA are symbolized by narrower screened black lines.

Each sector altitude is identified in solid black color by the MSL ceiling and floor values of the respective sector, eliminating the last two zeros. A leader line is used when the altitude values must be positioned outside the respective sectors because of charting space limitations. The TRSA name is shown near the north position of the TRSA as follows:

. Associated frequencies are listed in a table on the chart border.

Military Training Routes (MTRs) are shown on Sectionals and TACs. They are identified by the route designator:

. Route designators are shown in solid black on the route centerline, positioned along the route for continuity. The designator IR or VR is not repeated when two or more routes are established over the same airspace, e.g., IR201-205-227. Routes numbered 001 to 099 are shown as IR1 or VR99, eliminating the initial zeros. Direction of flight along the route is indicated by small arrowheads adjacent to and in conjunction with each route designator.

The following note appears on Helicopters, Sectionals and TACs except for Hawaiian Islands, which is different.

There are IFR (IR) and VFR (VR) routes as follows: Route identification:

a. MTRs with no segment above 1500' are identified by four-digit numbers; e.g., VR1007, etc. These routes are generally developed to be flown under Visual Flight Rules.

b. MTRs that include one or more segments above 1500' AGL are identified by three or fewer digit numbers; e.g., IR21, etc. These routes are developed to be flown, to the maximum extent possible under Instrument Flight Rules.

FAA Chart Users Guide - VFR Terms and Symbols

FAA Chart Users Guide - VFR Terms and Symbols

Route width varies for each MTR and can extend several miles on either side of the charted MTR centerline. Detailed route width information is available in the Flight Information Publication (FLIP) AP/1B (a Department of Defense publication), or through the 56 Day NASR Subscription from the National Flight Data Center (NFDC).

Special Military Activity areas are indicated on Sectionals by an underlying IFR Military Training Route with the lateral limits of the route shown by a gray Special Use Airspace symbol. A boxed note accompanies the area. The note contains radio frequency and route identifier information to use for obtaining area activity status.

SPECIAL MILITARY ACTIVITY FOR IR850, IR851, IR852 CTC BANGOR RADIO

ON 122.4 255.4 FOR ACTIVITY STATUS

The following guidance appears in the margin of applicable Sectional Charts.

The chart identifies IFR Military Training Routes and Military Operations Area within which the Department of Defense conducts periodic operations involving Unmanned Aircraft Systems. These aircraft may be accompanied by military or other aircraft which provide the pilots of the Unmanned Aircraft Systems visual observation information about other aircraft operations near them. Status of these routes and areas may be obtained by contacting the FAA/DoD facility on designated frequencies along the IFR route, referencing the identifier, e.g., IR214 as depicted on this chart. The lateral limits of these specified routes are shown by the Special Use Airspace symbol. Altitudes for these route segments are also shown.

SPECIAL MILITARY ACTIVITY

EXPLANATION OF VFR TERMS AND SYMBOLS › FOREIGN AREAS

FOREIGN AREAS

The data depicted in areas outside the U.S. is skeletonized on all VFR aeronautical charts. Only major airports, NAVAIDs, and airways are charted in foreign areas in screened black. Cultural features, hydrographic information and geographic relief are depicted in subdued and different shades of gray. A note regarding the expectation of the use of foreign charts and flight information publications is depicted along the boundary.

EXPLANATION OF VFR TERMS AND SYMBOLS › TERMINAL AREA CHART (TAC) COVERAGE

TERMINAL AREA CHART (TAC) COVERAGE

TAC coverage is shown on appropriate Sectionals by a 1/4" masked line as indicated below. Within this area pilots should use TACs, which provide greater detail. A note indicating that the area is on the TAC appears near the masked boundary line.

EXPLANATION OF VFR TERMS AND SYMBOLS › INSET AND SPECIAL CHART COVERAGE

INSET AND SPECIAL CHART COVERAGE

Inset and Special Chart Coverage (.i.e., Grand Canyon Chart) is shown on appropriate Sectionals by a 1/8" masked line as indicated below. A note to this effect appears near the masked boundary line. (Additional examples shown in VFR Sectional and Terminal Charts > Navigational and Procedural Information > Chart Limits.)

EXPLANATION OF VFR TERMS AND SYMBOLS › CHART TABULATIONS

CHART TABULATIONS

Airport Tower Communications are provided in a columnized tabulation for all tower-controlled airports that appear on the respective chart. Airport names are listed alphabetically. If the airport is military, the type of airfield, e.g., AAF, AFB, NAS, is shown after the airfield name. In addition to the airport name, tower operating hours, primary Very High Frequency/Ultra High Frequency (VHF/UHF) local Control Tower (CT), Ground Control (GND CON), and Automatic Terminal Information Service (ATIS) frequencies, when available, will be given. Airport Surveillance Radar (ASR) and/or Precision Approach Radar (PAR) procedures are listed when available.

Approach Control Communications are provided in a columnized tabulation listing Class B, Class C, Terminal Radar Service Areas (TRSA) and Selected Approach Control Facilities when available. Primary VHF/UHF frequencies are provided for each facility. Sectorization occurs when more than one frequency exists and/or is approach direction dependent. Availability of service hours is also provided.

Special Use Airspace (SUA): Prohibited, Restricted and Warning Areas are presented in blue and listed numerically for U.S. and other countries. A tabulation of Alert Areas (listed numerically) and Military Operations Areas (MOA) (listed alphabetically) appear on the chart in magenta. All are supplemented with altitude, time of use and the controlling agency/ contact facility, and its frequency when available. Users need to be aware that a NOTAM addressing activation will NOT be issued to announce permanently listed times of use. The controlling agency will be shown when the contact facility and frequency data is unavailable.

FAA Chart Users Guide - VFR Terms and Symbols

FAA Chart Users Guide - VFR Terms and Symbols

Airport

Name

Hours of Operation (local time)

Frequencies (VHF/UHF)

Runway dependent

Approach

direction dependent

Radar Instrument Approach available

Airspace

Name

VHF/UHF

VHF/UHF

{ {

{

{

VHF UHF{

{

Sectors for VHF and UHF traffic

local time

Sunrise to Sunset

Frequencies (VHF/UHF)

Radar Approach

Control

{

NOT FOR NAVIGATION

{

FAA Chart Users Guide - VFR Terms and Symbols

VFR SECTIONAL AND TERMINAL AREA CHARTS

VFR SECTIONAL AND TERMINAL AREA CHARTS

GENERAL INFORMATION

The symbols shown in this section illustrate those that appear in the Sectional Aeronautical Charts (Sectionals) and Terminal Area Charts (TACs). The same symbology is utilized in VFR Flyway Planning Charts, Helicopter Route Charts and Caribbean Aeronautical Charts (CACs), however the scale of the symbols may be different due to the particular chart scales. Where symbology is distinctive to a given chart, examples and explanations are given in the additional examples. These charts are updated every 56 days.

VFR SECTIONAL AND TERMINAL AREA CHARTS › AIRPORTS

AIRPORTS

Landplane: Civil

Non-Towered Towered Airports having control towers (CT) are shown in blue, all others are shown in magenta.

All recognizable runways, including some that may be closed, are shown for visual identification purposes. Fuel available.

Runway patterns will be depicted at airports with at least one hard surfaced runway 1500´ or greater in length.

Landplane: Civil-Military

Landplane: Military Non-Towered Towered

Refueling and repair facilities not indicated.

Heliport Non-Towered Towered

(Selected)

Foreign

Foreign Airport Note

NOTE: Airports outside the U.S. Flight Information Region (FIR) are shown with the standard symbol. Only the airport names and ICAO identifiers are shown.

Non-Towered Towered

Landplane: Landmark Value

Fuel not available

or

Complete information is not available.

PUBLIC USE - (Soft surfaced runway, or hard surfaced runway less than 1500’ in length.) Fuel not available.

RESTRICTED OR PRIVATE - (Soft surfaced runway, or hard surfaced runway less than 1500’ in length.) Non-public use having landmark value.

Appropriate note as required for hard surfaced runways only: “(CLOSED)”

OBJECTIONABLE is an airport that has an airspace determination based upon a number of factors including conflicting traffic patterns with another airport, hazardous runway conditions, or natural or man-made obstacles in close proximity to the landing area.

UNVERIFIED - A landing area available but warranting more than ordinary precaution due to: (1) lack of current information on field conditions, and/or (2) available information indicates peculiar operating limitations.

ABANDONED - Depicted for landmark value or to prevent confusion with an adjacent usable landing area. (Normally at least 3000’ paved).

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Charts

Ultralight Flight Park

(Selected)

AIRPORTS (Continued)

Seaplane

Airport Data Grouping

Boxed airport name indicates airport for which a Special Traffic Rule has been established.

(Pvt): Non-public use having landmark value.

“OBJECTIONABLE”: This airport may adversely affect airspace use.

Facility No Fuel Facility With Fuel

Non-Towered Towered

Facility With Runway

and Waterway

UNICOM

UNICOM

Flight Service Station on field Airports where fixed wing special VFR operations are prohibited (shown above airport name) FAR 91

Indicates FAR 93 Special Air Traffic Rules and Airport Traffic Pattern Location Identifier ICAO Location Identifier Control Tower (CT) - primary frequency Star indicates operation part-time. See tower frequencies tabulation for hours of operation

Follows the Common Traffic Advisory Frequency (CTAF) Automatic Terminal Information Services

Automatic Flight Information Service Automated Surface Weather Observing Systems; shown when full-time ATIS is not available.

Elevation in feet

Lighting in operation Sunset to Sunrise Lighting limitations exist; refer to Chart Supplement Length of longest runway in hundreds of feet; usable length may be less.

Aeronautical advisory station

Runways with Right Traffic Patterns (public use) See Chart Supplement VFR Advisory Service Shown when ATIS is not available and frequency is other than the primary CT frequency. Weather Camera Airport of Entry

When information is lacking. the respective character is replaced by a dash. Lighting codes refer to runway edge lights and may not represent the longest runway or full length lighting.

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

VFR SECTIONAL AND TERMINAL AREA CHARTS › RADIO AIDS TO NAVIGATION

RADIO AIDS TO NAVIGATION

VOR

Operates less than contiuous or On-Request

Underline indicates no voice on this frequency

VORTAC When an NDB NAVAID shares the same name and Morse Code as the VOR NAVAID the frequency can be collocated inside the same box to conserve space.

VOR-DME

Crosshatch indicates Shutdown status

DME

DME co-located at an airport Note: DMEs are shown without the compass rose.

Compass Rose

Compass Rose is “reference” oriented to magnetic north

Example of VOR NAVAID co-located at airport

Non-Directional Radio Beacon (NDB)

NDB-DME

NAVAID Used To Define Class B Airspace ILS Components ILS-DME

TAC - Shown when used in description of Class B airspace.

Compass Rosette

Shown only in areas void of VOR roses.

Compass rosette will be based on the five year epoch magnetic variation model.

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

RADIO AIDS TO NAVIGATION (Continued)

Automated Weather Broadcast Services VHF/UHF LF/MF Automated Weather Observing System (AWOS) / Automated Surface Observing System (ASOS).

Flight Service Station (FSS) Heavy line box indicates Flight Service Station (FSS). Frequencies 121.5, 122.2 and 243.0 are available at many Alaskan FSSs and are not shown above boxes. All other frequencies are shown. Frequencies transmit and receive except those followed by an R.

R - receive only

Off Airport AWOS/ASOS

Off-Airport Weather Camera Locations

Broadcast Stations (BS) On request by the proper authority or when a VFR Checkpoint

Remote Communications Outlet (RCO)

FSS Radio providing voice communications

Frequencies above thin line box are remoted to NAVAID site. Other frequencies at FSS providing voice communication may be available determined by altitude and terrain. Consult Chart Supplement for complete information.

Thin line box without frequencies and controlling FSS name indicates no FSS frequency available.

VFR SECTIONAL AND TERMINAL AREA CHARTS › AIRSPACE INFORMATION

AIRSPACE INFORMATION

Class B Airspace

Sectional

Appropriate notes as required may be shown.

Only the airspace effective below 18,000 feet MSL are shown.

(Mode C see FAR 91.215 / AIM)

Terminal Area Chart (TAC)

All mileages are nautical (NM).

All radials are magnetic.

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

WX CAM

AIRSPACE INFORMATION (Continued)

Class C Airspace Appropriate notes as required may be shown.

(Mode C see FAR 91.215/ AIM)

Class E Airspace

The limits of Class E airspace shall be shown by narrow vignettes or by the dashed magenta symbol. Individual units of designated airspace are not necessarily shown; instead, the aggregate lateral and vertical limits shall be defined by the following:

Airspace beginning at the surface designated for airports and extension areas.

Airspace beginning at 700 feet AGL that laterally abuts 1200 feet or higher Class E Airspace.

Airspace beginning at 700 feet AGL that laterally abuts uncontrolled (Class G) airspace. Airspace beginning at 1200 feet AGL that laterally abuts uncontrolled (Class G) airspace.

Differentiates floors of airspace greater than 700 feet above the surface.

When the ceiling is less than 18,000 feet MSL, the value prefixed by the word “CEILING”, shall be shown along the limits.

Class D Airspace

Altitude in hundreds of feet MSL

(A minus in front of the figure is used to indicate “from surface to but not including...”)

Airspace beginning at the surface designated for airports and extension areas.

Airspace beginning at the surface with an airspace exclusion area where Class E airspace is excluded below 1200’ MSL.

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

AIRSPACE INFORMATION (Continued)

Class E Airspace (Continued)

Low Altitude Airways VOR and LF/MF (Class E Airspace)

Low altitude Federal Airways are indicated by centerline.

Only the controlled airspace effective below 18,000 feet MSL is shown

Miscellaneous Air Routes

Combined Federal Airway/RNAV 2 “T” Routes are identified in solid blue type adjacent to the solid magenta federal airway identification.

The joint route symbol is screened magenta.

Flight Information Regions (FIR)

MEXICO FIR MMFR

NEW YORK OCEANIC CTA/FIR KZNY

WINNIPEG FIR CZWG

OAKLAND OCEANIC

CONTROL AREA

MONTERREY CTA SECTOR 3

Oceanic Control Areas (OCA)

Control Areas (CTA)

Offshore Control Areas

Foreign Airspace Note

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

AIRSPACE INFORMATION (Continued)

Special Conservation Areas

National Park, Wildlife Refuge, Primitive and Wilderness Areas, etc.

Special Flight Rules Area (SFRA) Relating to National Security

Example: Washington DC

Appropriate notes as required may be shown.

Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features.

Temporary Flight Restriction (TFR) Relating to National Security

Example: Washington DC

Appropriate notes as required may be shown.

NOAA Regulated National Marine Sanctuary Designated Areas

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

AIRSPACE INFORMATION (Continued)

Special Flight Rules Area (SFRA)

Special Use Airspace Only the airspace effective below 18,000 feet MSL is shown.

The type of area shall be spelled out in large areas if space permits.

* Alert Areas do not extend into Class A, B, C and D airspace, or Class E airport surface areas.

Special Air Traffic Rules / Airport Patterns (FAR Part 93) Appropriate boxed note as required shown adjacent to area.

Inside the FAR Part 93 boundary area, the cross hatching is at a 45 degree angle. The hypsometric tint shall be masked within the area around the yellow city tint when applicable (should not be confused with white glacier tint).

Flight Restricted Zone (FRZ) Relating to National Security

National Security Area

FOR REASONS OF NATIONAL SECURITY PILOTS ARE REQUESTED TO AVOID FLIGHT BELOW 1200' MSL IN THIS AREA

NOTICE

Small Area

Appropriate notes as required may be shown

Special Awareness Training Areas

Mode C (FAR 91.215)

MO

DE

C

&

AD

S-

B

OU

T

30

N

M

Appropriate notes as required may be shown.

Air Defense Identification Zone (ADIZ) Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features.

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

AIRSPACE INFORMATION (Continued)

High Energy Radiation Areas

Appropriate notes as required may be shown

Military Training Routes (MTR)

Special Military Activity Routes (SMAR)

SPECIAL MILITARY ACTIVITY FOR IR850, IR851, IR852 CTC BANGOR RADIO

ON 122.4 255.4 FOR ACTIVITY STATUS Boxed notes shown adjacent to route.

IFR Routes

Arrival

Departure

Arrival/Departure

TAC only

Special Security Notice Permanent Continuous Flight Restriction Areas

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

Sporting Event Temporary Flight Restriction (TFR) Sites

National Defense Airspace Temporary Flight Restriction (TFR) Areas

Space Operations Area (FAR Part 91.143)

Miscellaneous Activity Areas

Aerobatic Practice Area

Glider Operations

Hang Glider Activity

Ultralight Activity

Unmanned Aircraft Activity

Parachute Jumping Area with Frequency

Space Launch Activity Area

AIRSPACE INFORMATION (Continued)

VFR Transition Routes

Appropriate notes as required may be shown.

Uni-directional

Bi-directional

Bi-directional with NAVAID Ident and Radial TAC only

Terminal Radar Service Area (TRSA) TRSA Name

TRSA Boundaries

TRSA Sectors

Appropriate notes as required may be shown.

Examlple: Los Angeles

Example: Harrisburg, PA

VFR SECTIONAL AND TERMINAL AREA CHARTS › NAVIGATIONAL AND PROCEDURAL INFORMATION

NAVIGATIONAL AND PROCEDURAL INFORMATION Isogonic Line and Value Isogonic lines and values shall be based on the five year epoch magnetic variation model.

Local Magnetic Notes Unreliability Notes

Intersections Named intersections used as reporting points. Arrows are directed toward facilities that establish intersection.

Aeronautical Lights By Request

Site

Rotating or Oscillating

Isolated Location

Rotating Light with Flashing Code Identification Light

Rotating Light with Course Lights and Site Number

FAA Chart Users Guide - VFR Symbology - Sectional and Terminal Area Charts

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

Airport Beacons Rotating or Flashing

Isolated Locations

VFR Checkpoints Underline indicates proper name of VFR Checkpoint.

Waypoints RNAV

VFR Stand-Alone

VFR Collocated with Checkpoint

Obstruction Above 200’ & below 1000’ AGL (above 299’ AGL in urban area)

Under Construction (UC) or reported and position/elevation unverified

1000’ and higher (AGL)

Wind Turbine

High-Intensity Obstruction Lights Less than 1000’ (AGL)

1000’ and higher (AGL)

Wind Turbine

Group obstruction

Wind Turbines

High-intensity lights may operate part-time or by proximity activation.

Marine Lights With Characteristics of Light

Red White Green Blue Orange Black Yellow Sector Fixed Single Occulting Group Occulting Composite Group Occulting Isophase Flashing Group Flashing Composite Group Flashing Quick Interrupted Quick/Interrupted Quick Flashing Morse Code Fixed and Flashing Alternating Group Long Flash Group Quick Flashing Very Quick Flashing Group Very Quick Flashing Interrupted Very Quick Flashing Ultra Quick Flashing Interrupted Ultra Quick Flashing

* Marine Lights are white unless otherwise noted. Alternating lights are red and white unless otherwise noted.

Group Obstruction

Above 200’ & below 1000’ AGL (above 299’ AGL in urban area)

1000’ and higher (AGL)

At least two in group 1000’ and higher (AGL)

Wind Turbines

Wind Turbine Farms

2894 UC

When highest wind turbine is unverified, UC will be shown after MSL value.

Maximum Elevation Figure (MEF) (see VFR Terms tab for explanation)

Land Light

NAVIGATIONAL AND PROCEDURAL INFORMATION (Continued)

Chart Limits

Outline on Sectional of Terminal Area Chart

TAC

Outline of Special Chart on Sectional and Terminal Area Chart

Outline on Sectional of Inset Chart

NAVIGATIONAL AND PROCEDURAL INFORMATION (Continued)

VFR SECTIONAL AND TERMINAL AREA CHARTS › CULTURE

CULTURE

Railroads Single Track

Double Track

More Than Two Tracks

Electric

Non-operating, Abandoned or Under Construction

Roads Dual-Lane Divided Highway Category 1

Primary Category 2

Secondary Category 2

Trails Category 3

Provides symbolization for dismantled railroad when combined with label “dismantled railroad.”

Railroad Yards Limiting Track To Scale

Location Only

Railroad Stations

Railroad Sidings and Short Spurs

Road Markers Interstate Route No.

U.S. Route No.

Air Marked Identification Label

Road Names

Roads Under Construction

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

CULTURE (Continued)

Related Features to Railroads and Roads

Bridges and Viaducts Railroad

Causeways

Overpasses and Underpasses

Tunnels-Road and Railroad

Bridges and Viaducts Road

Ferries, Ferry Slips and Fords

Populated Places Yellow tinted areas indicate populated places.

Small circle indicates an area too small to depict using yellow tint.

Font Style and Size indicate the category of the populated area:

Large Cities Category 1 - population more than 250,000

Cities and Large Towns Category 2 - population 25,000 to 250,000

Towns and Villages Category 3 - population less than 25,000

Boundaries

International

State or Province

Convention or Mandate Line

Miscellaneous Cultural Features

Dams

Passable Locks

Weirs and Jetties

Breakwaters

Pipelines

Underground

Landmark Features

Mines or Quarries Shaft Mines or Quarries

Wells Other than water

Lookout Towers (Elevation Base of Tower) Aerial Cableways,Conveyors, Etc.

618

Dam Carrying Road

Small Locks

Seawalls

Piers, Wharfs, Quays, etc.

Power Transmission and Telecommunication Lines

Tanks

Outdoor Theater

Race Tracks Coast Guard Station Landmark Areas

Time Zones

Date Line

CULTURE (Continued)

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

VFR SECTIONAL AND TERMINAL AREA CHARTS › HYDROGRAPHY

HYDROGRAPHY

Open Water

Open/Inland Water

Lakes Label as required.

Perennial When too numerous to show individual lakes, show representative pattern and descriptive note. Number indicates elevation.

Non-Perennial (dry, intermittent, etc.) Illustration includes small perennial lake.

Reservoirs Natural Shorelines

Man-made Shorelines Label when necessary for clarity

Too small to show to scale

Under Construction

Inland Water

Shorelines Definite

Fluctuating

Unsurveyed Indefinite

Man-made

HYDROGRAPHY (Continued)

Streams

Perennial

Non-Perennial

Fanned Out

Alluvial fan

Braided

Disappearing

Seasonally Fluctuating with undefined limits

with maximum bank limits, prominent and constant

Sand Deposits in and along riverbeds

Wet Sand Areas Within and adjacent to desert areas

Canals

To Scale

Abandoned or Under Construction

Abandoned to Scale

Small Canals and Drainage / Irrigation Ditches

Perennial

Non-Perennial

Abandoned or Ancient Numerous

Representative pattern and/or descriptive note.

Aqueducts

To Scale

Abandoned or Under Construction

Underground

Suspended or Elevated

Tunnels

Kanats Underground with Air Vents

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

39 39

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

HYDROGRAPHY (Continued)

Falls Double-Line

Single-Line

Rapids Double-Line

Single-Line

Salt Evaporators and Salt Pans Man Exploited

Hummocks and Ridges

Peat Bogs

Rice Paddies Extensive areas indicated by label only.

Springs, Wells and Waterholes Swamps, Marshes and Bogs

Mangrove And Nipa

Cranberry Bogs

Land Subject To Inundation

Reefs-Rocky or Coral

coral

Fish Ponds and Hatcheries

Miscellaneous Underwater Features Not Otherwise Symbolized

Wrecks Exposed Rocks-Isolated Bare or Awash

Tundra

HYDROGRAPHY (Continued)

Permanent Snow and Ice Areas

Glaciers

Glacial Moraines

Ice Cliffs

Snowfields, Ice Fields And Ice Caps

Foreshore Flats Tidal flats exposed at low tide.

VFR SECTIONAL AND TERMINAL AREA CHARTS › RELIEF

RELIEF

Contours

Basic

Approximate

Intermediate

Auxiliary

Ice

Permanent Polar Ice

Pack Ice

Ice Peaks

Depression (Illustration includes mound within depression)

Values

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

RELIEF (Continued)

Sand or Gravel Areas

Sand Dunes

To Scale

Hachuring

Spot Elevations Position Accurate

Position Accurate, Elevation Approximate

Highest in General Area

Highest on Chart

Mountain Pass

Distorted Surface Areas

Lava Flows

Sand Ridges To Scale

Shaded Relief

Quarries To Scale

Craters

Unsurveyed Areas Label appropriately as required

Levees And Eskers

Rock Strata Outcrop

Strip Mines, Mine Dumps And Tailings To Scale

Escarpments, Bluffs, Cliffs, Depressions, Etc.

Uncontoured Areas

RELIEF DATA INCOMPLETE

Label appropriately as required

FAA Chart Users’ Guide - VFR Symbology - Sectional and Terminal Area Charts

VFR FLYWAY PLANNING CHARTS › GENERAL INFORMATION

VFR FLYWAY PLANNING CHARTS

GENERAL INFORMATION

VFR Flyway Planning Charts are printed on the reverse sides of the Baltimore-Washington, Charlotte, Chicago, Cincinnati, Dallas-Ft. Worth, Denver, Detroit, Houston, Las Vegas, Los Angeles, Miami, Orlando, New Orleans, Phoenix, St. Louis, Salt Lake City, San Diego, San Francisco, Seattle, and Tampa Terminal Area Charts (TACs). The scale is 1:250,000, with area of coverage the same as the associated TACs. Flyway Planning Charts depict flight paths and altitudes recommended for use to by-pass areas heavily traversed by large turbine-powered aircraft. Ground references on these charts provide a guide for visual orientation. VFR Flyway Planning charts are designed for use in conjunction with TACs and are not to be used for navigation. These charts are updated every 56 days.

VFR FLYWAY PLANNING CHARTS › AIRPORTS

AIRPORTS

Landplane

No distinction is made between airports with fuel and those without fuel. Runways may be exaggerated to clearly portray the pattern. Hardsurfaced runways that are closed but still exist are included in the charted pattern.

FAR 91 - Fixed wing special VFR operations prohibited.

(Pvt): Non-public use having landmark value.

“OBJECTIONABLE”: This airport may adversely affect airspace use.

VFR FLYWAY PLANNING CHARTS › RADIO AIDS TO NAVIGATION

RADIO AIDS TO NAVIGATION

VHF Omni-Directional Radio Range (VOR)

VORTAC

VOR-DME

DME

Example: DME co-located at an airport.

Landplane (continued)

ABANDONED - Depicted for landmark value or to prevent confusion with an adjacent usable landing area. Only portrayed beneath or close to the VFR flyway routes or requested by the FAA. (Normally at least 3000’ paved).

FOREIGN

Foreign Airport Note

NOTE: Airports outside the U.S. Flight Information Region (FIR) are shown with the standard symbol. Only the airport names and ICAO identifiers are shown.

Non-Directional Radio Beacon (NDB)

NDB-DME

NAVAIDS Used to Define Class Airspace

FAA Chart Users’ Guide - VFR Chart Symbology - Flyway Planning Chars

VFR FLYWAY PLANNING CHARTS › AIRSPACE INFORMATION

AIRSPACE INFORMATION

Class B Airspace Appropriate notes as required may be shown.

(Mode C see FAR 91.215/AIM)

All mileages are nautical (NM).

All radials are magnetic.

Floors extending “upward and above” a certain altitude are preceded by a +. Operations at or below these altitudes are outside of the Class B Airspace.)

Class D Airspace

(A minus sign in front of the figure used to indicate “from surface to but not including...”)

ALTITUDE IN HUNDREDS OF FEET MSL.

Special Airspace Areas

Special Flight Rules Area (SFRA) Relating to National Security

Example: Washington DC

Appropriate notes as required may be shown.

Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features.

Class C Airspace Appropriate notes as required may be shown.

(Mode C see FAR 91.215/AIM)

Class E Surface (SFC) Airspace

FAA Chart Users’ Guide - VFR Symbology - Flyway Planning Charts

AIRSPACE INFORMATION (Continued)

Flight Restricted Zone (FRZ) Relating To National Security

Example: Washington DC

Temporary Flight Restriction (TFR) Relating To National Security

Example: Washington DC

Appropriate notes as required may be shown.

Special Use Airspace Only the airspace effective below 18,000 feet MSL is shown.

The type of area shall be spelled out in large areas if space permits.

Air Defense Identification Zone (ADIZ) Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features. Foreign Airspace Note

FAA Chart Users’ Guide - VFR Chart Symbology - Flyway Planning Chars

AIRSPACE INFORMATION (Continued)

Special Air Traffic Rules/Airport Traffic Areas (FAR Part 93) Appropriate boxed note as required shown adjacent to area. Inside the FAR Part 93 boundary area, the cross hatching is at a 45 degree angle.

Terminal Radar Service Area (TRSA)

IFR Routes Arrival

Departure

Arrival/Departure

VFR Transition Routes Appropriate notes as required may be shown.

Uni-directional

Bi-directional

Bi-directional with NAVAID Ident and Radial

Special Conservation Areas NOAA Regulated National Marine Sanctuary Designated Areas

Mode C (FAR 91.215)

MO

DE

C

&

AD

S-

B

OU

T

30

N

M

Appropriate notes as required may be shown.

Sporting Event Temporary Flight Restriction (TFR) Sites National Defense Airspace Temporary Flight Restriction (TFR) Areas

Miscellaneous Activity Areas Aerobatic Practice Area

Glider Operations

Hang Glider Activity

Ultralight Activity

Unmanned Aircraft Activity

Parachute Jumping Area with Frequency

Space Launch Activity Area

Example: Los Angeles

FAA Chart Users’ Guide - VFR Symbology - Flyway Planning Charts

Suggested VFR Flyway And Altitude

Military Training Routes (MTR)

VFR Checkpoints Underline indicates proper name of VFR Checkpoint

VFR Waypoints Stand-Alone

Collocated with VFR Checkpoint

Navigational Data

Obstructions Obstacles may be lit or unlit.

Only obstacles greater than 999’ above ground level (AGL) or specified by the local ATC Facility shall be shown.

AGL heights are not shown. High-intensity lights may operate part-time or by proximity activation.

Under Construction or reported and position/elevation unverified.

AIRSPACE INFORMATION (Continued)

FAA Chart Users’ Guide - VFR Chart Symbology - Flyway Planning Chars

VFR FLYWAY PLANNING CHARTS › NAVIGATIONAL AND PROCEDURAL INFORMATION

NAVIGATIONAL AND PROCEDURAL INFORMATION

CULTURE

Railroads Single and Multiple Tracks Populated Places Built-up Areas

Towns BOUNDARIES International

HYDROGRAPHY

Shorelines

RELIEF Spot Elevations Position Accurate Mountain Peaks

Roads Dual-Lane

Divided Highway Primary

Prominent Pictorials

VFR FLYWAY PLANNING CHARTS › RELIEF

Power Transmission Lines

Landmarks

Reservoirs

Major Lakes and Rivers

FAA Chart Users’ Guide - VFR Symbology - Flyway Planning Charts

FAA Chart Users’ Guide - VFR Chart Symbology - Flyway Planning Chars

HELICOPTER ROUTE CHARTS

GENERAL INFORMATION

Helicopter Route Charts are three-color charts that depict current aeronautical information useful to helicopter pilots navigating in areas with high concentrations of helicopter activity. Information depicted includes helicopter routes, four classes of heliports with associated frequency and lighting capabilities, NAVAIDS, and obstructions. In addition, pictorial symbols, roads, and easilyidentified geographical features are portrayed. The scale is 1:125,000. These charts are updated every 56 days.

HELICOPTER ROUTE CHARTS › GENERAL INFORMATION

Landplane All recognizable runways, including some that may be closed, are shown for visual identification.

Public

Private

Unverified

Abandoned

Foreign

Seaplane

Heliport Heliports public and private

Medical Center

Helipads located at major airports (when requested)

Ultralight Flight Park

Foreign Airport Note

NOTE: Airports outside the U.S. Flight Information Region (FIR) are shown with the standard symbol. Only the airport names and ICAO identifiers are shown.

Airport Data Grouping

Boxed airport name indicates airport for which a Special Traffic Rule has been established.

(Pvt): Non-public use having landmark value. “OBJECTIONABLE”: This airport may adversely affect airspace use.

Flight Service Station on field

Airspace where fixed wing special visual flight rules operations are prohibited (shown above airport name) FAR 91

Indicates FAR 93 Special Air Traffic Rules and Airport Traffic

Location Idendtifier

ICAO Location Identifier

Control Tower (CT) - primary frequency

Star indicates operation part-time. See tower frequencies tabulation for hours of operation

Automated Terminal Information Service

Automated Surface Weather Observing Systems (shown when full-time ATIS is not available). Some ASOS/AWOS facilities may not be located at airports.

Elevation in feet

Lighting in operation Sunset to Sunshine

Lighting limitations exists, refer to Chart Supplement

UNICOM - Aeronautical advisory station

Follows the Common Traffic Advisory Frequency (CTAF)

nverified Heliport

Airport of Entry

Weather Camera When lighting is lacking, the respective character is replaced by a dash.

Lighting codes refer to runway edge lights and may not represent the longest runway or full length lighting. Dashes are not shown on heliports or helipads unless additional information follows the elevation (e.g. UNICOM, CTAF).

HELICOPTER ROUTE CHARTS › AIRPORTS

AIRPORTS

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

RADIO AIDS TO NAVIGATION

NAVAIDs

VHF Omni-Directional Radio (VOR) Range

Open Circle

Open circle symbol shown when NAVAID located on airport. Type of NAVAID shown in top of box.

HELICOPTER ROUTE CHARTS › RADIO AIDS TO NAVIGATION

Compass Rose is “reference” oriented to magnetic north.

VOR

Operates less than contiuous or On-Request

Underline indicates no voice on this frequency

VORTAC

ASOS/AWOS

Frequency Channel Identifier

} Morse

Code

NDB Frequency Weather Camera When an NDB NAVAID shares the same name and Morse Code as the VOR NAVAID the frequency can be collocated inside the same box to conserve space.

VOR-DME

Crosshatch indicates Shutdown status

DME

Flight Service Station (FSS)

Heavy line box indicates Flight Service Station (FSS). Frequencies 121.5, 122.2 and 243.0 are available at many Alaskan FSSs and are not shown above boxes. All other frequencies are shown.

Certain FSSs provide Airport Advisory Service, refer to Chart Supplement.

R - Receive Only

Non-Directional Radio Beacon (NDB)

NDB-DME

NAVAID Used to Define Class B Airspace

Broadcast Stations (BS) On request by the proper authority or when a VFR Checkpoint.

Remote Communications Outlet (RCO)

Frequencies above thin line box are remoted to NAVAID site. Other FSS frequencies providing voice communications may be available as determined by altitude and terrain. Consult Chart Supplement for complete information.

Thin line box without frequencies and controlling FSS name indicates no FSS frequency available.

HELICOPTER ROUTE CHARTS › AIRSPACE INFORMATION

AIRSPACE INFORMATION

Class B Airspace

Ceiling of Class B in hundreds of feet MSL

Floor of Class B in hundreds of feet MSL

CLASS B SURFACE AREA

NAVAID identifier and radial from facility

NAVAID identifier and distance from facility

Appropriate notes as required may be shown. (Mode C see FAR 91.215/AIM)

All mileages are nautical (NM)

(Floors extending “upward from above” a certain altitude are preceded by a +. Operations at and below these altitudes are outside of Class B Airspace.)

All radials are magnetic.

Class D Airspace (A minus in front of the figure is used to indicate “from surface to but not including...”)

Altitudes in hundreds of feet MSL.

Special Airspace Areas

Special Flight Rules Area (SFRA) Relating to National Security Example: Washington DC

Appropriate notes as required may be shown.

Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features.

Class C Airspace

Ceiling of Class C in hundreds of feet MSL

Floor of Class C in hundreds of feet MSL

Ceiling is to but not including floor of Class B

Surface

Appropriate notes as required may be shown. (Mode C see FAR 91.215/AIM)

Class E Surface (SFC) Airspace

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

AIRSPACE INFORMATION (Continued)

Special Airspace Areas (Continued)

Flight Restricted Zone (FRZ) Relating to National Security

Air Defense Identification Zone (ADIZ) Note: Delimiting line not shown when it coincides with International Boundary, projection lines or other linear features. Special Security Notice Permanent Continuous Flight Restriction Areas

Mode C (FAR 91.215)

30 N

M

MODE

C &

ADS-

B OU

T

Appropriate notes as required may be shown. Terminal Radar Service Area (TRSA) Appropriate notes as required may be shown.

Example: Washington DC

Special Air Traffic Rules / Airport Traffic Areas (FAR Part 93)

Appropriate boxed notes as required shown adjacent to area. Inside the FAR Part 93 boundary area, the cross hatching is at a 45 degree angle.

Sporting Event Temporary Flight Restriction (TFR) Sites National Defense Airspace Temporary Flight Restriction (TFR) Areas

AIRSPACE INFORMATION (Continued)

Miscellaneous Activity Areas

Aerobatic Practice Area

Glider Operations

Hang Glider Activity

Ultralight Activity

Unmanned Aircraft Activity

Parachute Jumping Area with Frequency

Space Launch Activity Area

Military Training Routes (MTR)

Helicopter Routes Primary Route with Route Name and Tower Frequency

Secondary Route

Transition Symbol

Reporting Points

Non-compulsory

Compulsory

Reporting Point Name

Foreign Airspace Note

Police Zones

Special Use Airspace Only the airspace effective below 18,000 feet MSL is shown.

The type of area shall be spelled out in large areas if space permits.

One-way Route

Altitude Changeover Point

Recommended Altitudes Maximum Altitude

Minimum Altitude

Recommended Altitude

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

Special Conservation Areas National Park, Wildlife Refuge, Primitive and Wilderness Areas, etc.

VFR Checkpoints Underline indicates proper name of VFR Checkpoint.

Obstruction

Above 299’ and below 1000’ AGL

1000’ and higher AGL

High-Intensity Obstruction Lights High-intensity lights may operate part-time or by proximity activation.

Navigation Data

NOAA Regulated National Marine Sanctuary Designated Areas

VFR Waypoints Stand-Alone

Collocated with VFR Checkpoint

Collocated with VFR Checkpoint & Reporting Point

Group Obstruction Above 299’ and below 1000’ AGL

1000’ and higher AGL

Wind Turbine Farms

2894 UC

When highest wind turbine is unverified, UC will be shown after MSL value.

Maximum Elevation Figure (MEF) (see VFR Terms tab for explanation)

AIRSPACE INFORMATION (Continued)

HELICOPTER ROUTE CHARTS › NAVIGATIONAL AND PROCEDURAL INFORMATION

NAVIGATIONAL AND PROCEDURAL INFORMATION

Roads Dual-Lane: Divided Highways

Major Boulevards & Major Streets Primary

Boundaries International

State or Province

Power Transmission Lines

Prominent Pictorials

Landmarks

CULTURE

Railroads Single Track

Double Track

Bridges

Populated Places Built-up Areas

HELICOPTER ROUTE CHARTS › CULTURE

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

FAA Chart Users’ Guide - VFR Chart Symbology - Helicopter Charts

CARIBBEAN VFR AERONAUTICAL CHARTS (CAC)

The Caribbean Charts are published as two VFR Charts: Caribbean 1 (CAC-1) covers Southern Florida, Cuba, Haiti and the Bahamas; Caribbean 2 (CAC-2) covers Puerto Rico, Haiti, Dominican Republic, the Lesser Antilles and Leeward Islands. Charts are updated every 56-day chart cycle.

CARIBBEAN VFR AERONAUTICAL CHARTS (CAC)

Caribbean Charts are designed for VFR flights and provide aeronautical and topographic information of the Caribbean. The aeronautical information includes airports, radio aids to navigation, Class airspace and special use airspace in U.S. and major airports, and radio aids to navigation in foreign areas. The topographic information includes city tint, populated places, principal roads, drainage patterns and shaded relief.

The chart symbols used on the Caribbean Charts are similar to those used in the Sectional and Terminal Area Charts, the major difference being in scale. The Caribbean VFR Chart scale is 1:1,000,000 versus the Sectional Chart Scale of 1:500,000 and Terminal Area Chart Scale of 1:250,000. Chart symbology will appear smaller on the Caribbean VFR Charts.

Example from Caribbean 2 VFR Aeronautical Chart

FAA Chart Users’ Guide - Caribbean VFR Aeronautical Charts (CAC)

FAA Chart Users’ Guide - Caribbean VFR Aeronautical Charts (CAC)

U.S. Airspace depiction as shown on Visual Aeronautical Charts

AIRSPACE

AIRSPACE

FAA Chart Users’ Guide - Airspace

FAA Chart Users’ Guide - Airspace

Excerpt from Detroit Sectional Chart.

SPORTING

EVENT TFR SITE

CLASS E

with SURFACE

FLOOR

CLASS C INNER BOUNDARY

CLASS C OUTER BOUNDARY

SPORTING

EVENT TFR SITES

CLASS E AIRSPACE EXTENSION

with SURFACE

FLOOR

MODE C BOUNDARY CLASS D AIRSPACE

CLASS B INTERNAL SECTOR

BOUNDARIES CLASS B

OUTER BOUNDARY

CLASS E

with 700’ AGL FLOOR

CLASS E

with 700’ AGL FLOOR

{

{

CLASS B EXTENSIONS

CLASS B EXTENSION

CLASS E

with 1200’ AGL FLOOR

CLASS E

with 1200’ AGL FLOOR

{

CLASS E

with 1200’ AGL FLOOR

FAA Chart Users’ Guide - Airspace

EXPLANATION OF IFR ENROUTE TERMS

EXPLANATION OF IFR ENROUTE TERMS

FAA charts are prepared in accordance with specifications of the Interagency Air Committee (IAC), and are approved by representatives of the Federal Aviation Administration and the Department of Defense (DoD). Some information on these charts may only apply to military pilots.

The explanations of symbols used on Instrument Flight Rule (IFR) Enroute Charts and examples in this section are based primarily on the IFR Enroute Low Altitude Charts. Other IFR products use similar symbols in various colors. The chart legends portray aeronautical symbols with a brief description of what each symbol depicts. This section provides more details of the symbols and how they are used on IFR Enroute charts.

EXPLANATION OF IFR ENROUTE TERMS › AIRPORTS

AIRPORTS

Operational airports are shown on IFR Enroute Charts.

Low Charts:

• All IAP Airports are shown on the Low Altitude Charts (US and Alaska).

• Non-IAP Airports are shown on the U.S. Low Altitude Charts (Contiguous US) have a minimum hard surface runway of 3,000’.

• Non-IAP airports are shown on the U.S. Low Altitude Alaska Charts are show if the runway is 3000’ or longer, hard or soft surface.

• Public heliports with an Instrument Approach Procedure (IAP) or requested by the FAA or DoD are depicted on the IFR Enroute Low Altitude Charts.

• Seaplane bases requested by the FAA or DoD are depicted on the IFR Enroute Low Altitude Charts.

On IFR Enroute Low Altitude Charts, airport tabulation is provided that identifies airport names, IDs and the panels they are located on.

High Charts:

• Airports shown on the U.S. High Enroute Charts (Contiguous US) have a minimum hard surface runway of 5000’.

• Airports shown on the U.S. High Enroute Alaska Charts have a minimum hard surface runway of 4000’.

Charted airports are classified according to the following criteria:

LOW/HIGH ALTITUDE

Blue - Airports with an Instrument Approach Procedure and/or RADAR MINIMA published in the high altitude DoD Flight Information Publications (FLIPs)

Green - Airports that have an approved Instrument Approach Procedure and/or RADAR MINIMA published in either the U.S. Terminal Procedures Publications (TPPs) or the DoD FLIPs

Brown - Airports without a published Instrument Approach Procedure or RADAR MINIMA

Black - Foreign airports

Airports are plotted at their true geographic position.

Airports are identified by the airport name. In the case of military airports, Air Force Base (AFB), Naval Air Station (NAS), Naval Air Facility (NAF), Marine Corps Air Station (MCAS), Army Air Field (AAF), etc., the abbreviated letters appear as part of the airport name.

FAA Chart Users’ Guide - IFR Enroute Terms

Airports marked "Pvt" immediately following the airport name are not for public use, but otherwise meet the criteria for charting as specified above.

Runway length is the length of the longest active runway (including displaced thresholds but excluding overruns) and is shown to the nearest 100 feet using 70 feet as the division point; e.g., a runway of 8,070' is labeled 81. The following runway compositions (materials) constitute a hard-surfaced runway: asphalt, bitumen, chip seal, concrete, and tar macadam. Runways that are not hard-surfaced have a small letter "s" following the runway length, indicating a soft surface.

AIRPORT DATA DEPICTION

Low Altitude

1. Airport elevation given in feet above or below mean sea level

2. Pvt - Private use, not available to general public

3. A solid line box enclosed the airport name indicates FAR 93 Special Requirements - see Directory/Supplement

4. “NO SVFR” above the airport name indicates FAR 91 fixedwing special VFR flight is prohibited.

5. or following the airport identifier indicates Class C or Class D Airspace

High Altitude - U.S.

6. Associated city names for public airports are shown above or preceding the airport name. If airport name and city name are the same, only the airport name is shown. The airport identifier in parentheses follows the airport name. City names for military and private airports are not shown.

7. Airport Ident ICAO Location Indicator shown outside contiguous U.S.

8. AFIS Alaska only

High Altitude - Alaska

LIGHTING CAPABILITY

Lighting Available

Pilot Controlled Lighting

Part-time or on request

No lighting available At private facilities- indicates no lighting information is available

A symbol between the airport elevation and runway length means that runway lights are in operation sunset to sunrise.

A symbol indicates there is Pilot Controlled Lighting. A symbol means the lighting is part-time or on request, the pilot should consult the Chart Supplement for light operating procedures. The Aeronautical Information Manual (AIM) thoroughly explains the types and uses of airport lighting aids.

VOR Minimum Operational Network (MON) Airports Designator

MON Airports with the Airport designator at the top of the Airport Data Block. The MON designation is to alert pilots to those airports that have retained ILS and VOR instrument approach procedures for safe recovery in the event of a GPS outage. Refer to the Aeronautical Information Manual (AIM) for expanded MON Airport guidance.

FAA Chart Users’ Guide - IFR Enroute Terms

EXPLANATION OF IFR ENROUTE TERMS › RADIO AIDS TO NAVIGATION

RADIO AIDS TO NAVIGATION

All IFR radio NAVAIDs that have been flight checked and are operational are shown on all IFR Enroute Charts. Very High Frequency/Ultrahigh Frequency (VHF/UHF) NAVAIDs, Very high frequency Omnidirectional Radio range (VORs), Tactical Air Navigation (TACANs) are shown in black, and Low Frequency/Medium Frequency (LF/MF) NAVAIDs, (Compass Locators and Aeronautical or Marine NDBs) are shown in brown.

On IFR Enroute Charts, information about NAVAIDs is boxed as illustrated below. To avoid duplication of data, when two or more NAVAIDs in a general area have the same name, the name is usually printed only once inside an identification box with the frequencies, TACAN channel numbers, identification letters, or Morse Code Identifications of the different NAVAIDs are shown in appropriate colors.

NAVAIDs in a shutdown status have the frequency and channel number crosshatched. Use of the NAVAID status "shutdown" is only used when a facility has been decommissioned but cannot be published as such because of pending airspace actions.

NAVIGATION AND COMMUNICATION BOXES - COMMON ELEMENTS

LOW ENROUTE CHARTS

RCO Frequencies NAVAID Name, SSV(s) FREQ, Ident, CH, Morse Code Latitude, Longitude

Controlling FSS Radio or FSS Name (AK)

HIGH ENROUTE CHARTS

RCO Frequencies NAVAID Name Frequency, Ident, SSV(s), Channel Latitude, Longitude

Controlling FSS Radio or FSS Name (AK)

COMMON ELEMENTS (HIGH AND LOW CHARTS)

RCO FREQUENCY Single Frequency

Multiple Frequencies Frequencies transmit and receive except those followed by R and T: R - Receive Only T - Transmit Only

NAVAID BOX

Thin line NAVAID boxes without frequency(s) and FSS radio name indicates no FSS frequencies available.

(AK only) Shadow NAVAID box indicates NAVAID and Flight Service Station (FSS) have same name.

VHF/UHF LF/MF

FAA Chart Users’ Guide - IFR Enroute Terms

NAVAID STANDARD SERVICE VOLUME (SSV) CLASSIFICATIONS

SSV Class Altitudes Distance (NM)

(T) Terminal 1000’ to 12,000’ 25

(L) Low Altitude 1000’ to 18,000’ 40

(H) High Altitude 1000’ to 14,500’ 14,500’ to 18,000’ 18,000’ to 45,000’ 45,000’ to 60,000’

40 100 130 100

(VL) VOR Low 1000’ to 5,000’ 5,000’ to 18,000’ 40 70

(VH) VOR High 1000’ to 5,000’ 5,000’ to 14,500’ 14,500’ to 18,000’ 18,000’ to 45,000’ 45,000’ to 60,000’

40 70 100 130 100

(DL) DME Low & (DH) DME High* 1000’ to 12,900’ 40 increasing to 130

(DL) DME Low 12,900’ to 18,000’ 130

(DH) DME High 12,900’ to 45,000’ 45,000’ to 60,000’ 130 100

* Between 1000’ to 12,900’, DME service volume follows a parabolic curve used by flight managment computers.

Notes: For NAVAIDs with two SSVs, the SSV for each component is shown in paired parentheses with the VOR SSV shown first followed by the DME or TACAN SSV. Additionally, High Altitude facilities provide Low Altitude and Terminal service volume and Low Altitude facilities provide Terminal service volume. Altitudes are with respect to the station’s site elevation. Coverage is not available in a cone of airspace directly above the facility. In some cases local conditions (terrain, buildings, trees, etc.) may require that the service volume be restricted. The public shall be informed of any such restriction by a remark in the NAVAID entry or by a NOTAM.

DISTANCE MEASURING EQUIPMENT

Facilities that operate in the “Y” mode for DME reception (Y)

VOICE COMMUNICATIONS VIA NAVAID

Voice Transmitted

No Voice Transmitted

NAVAID SHUTDOWN STATUS VHF/UHF LF/MF

PART TIME OR ON-REQUEST VHF/UHF LF/MF

AUTOMATED WEATHER BROADCAST SERVICES ASOS/AWOS - Automated Surface Observing Station/Automated Weather Observing Station

VHF/UHF LF/MF

Automated weather, when available, is broadcast on the associated NAVAID frequency.

LATITUDE AND LONGITUDE

Latitude and Longitude coordinates are provided for those NAVAIDs that make up part of a route/airway or a holding pattern. All TACAN facilities will include geographic coordinates.

LOW ENROUTE HIGH ENROUTE

FAA Chart Users’ Guide - IFR Enroute Terms

EXPLANATION OF IFR ENROUTE TERMS › AIRSPACE INFORMATION

AIRSPACE INFORMATION

CONTROLLED AIRSPACE

Controlled airspace consists of those areas where some or all aircraft are subjected to air traffic control within the following airspace classifications of A, B, C, D, & E.

Air Route Traffic Control Centers (ARTCC) are established to provide Air Traffic Control to aircraft operating on IFR flight plans within controlled airspace, particularly during the enroute phase of flight. Boundaries of the ARTCCs are shown in their entirety using the symbol below.

Air Route Traffic Control Center (ARTCC)

When Controller Pilot Data Link Communication (CPDLC) exists for an ARTCC, the text CPDLC (LOGON KUSA) will be shown parallel to the boundary above or below the ARTCC identification as shown below.

Air Route Traffic Control Center (ARTCC) with Controller Pilot Data Link Communication (CPDLC)

The responsible ARTCC Center names are shown adjacent and parallel to the boundary line. ARTCC sector frequencies are shown in boxes outlined by the same symbol.

ARTCC Name

Site Name Frequency

ARTCC Remoted Sites with discrete VHF and UHF frequencies

Class A Airspace is depicted as open area (white) on the IFR Enroute High Altitude Charts. It consists of airspace from 18,000 Mean Sea Level (MSL) to FL600.

Class B Airspace is depicted as screened blue area with a solid line encompassing the area.

Class C Airspace is depicted as screened blue area with a dashed line encompassing the area with a letter “C” enclosed in a box following the airport name.

Class B and Class C Airspace consist of controlled airspace extending upward from the surface or a designated floor to specified altitudes, within which all aircraft and pilots are subject to the operating rules and requirements specified in the Federal Aviation Regulations (UHF) 71. Class B and C Airspace are shown in abbreviated forms on IFR Enroute Low Altitude Charts. A general note adjacent to Class B airspace refers the user to the appropriate VFR Terminal Area Chart.

Class D Airspace (airports with an operating control tower) are depicted as open area (white) with a letter “D” enclosed in a box following the airport name.

Class E Airspace is depicted as open area (white) on the IFR Enroute Low Altitude Charts. It consists of airspace below FL180.

UNCONTROLLED AIRSPACE

Class G Airspace within the United States extends to 14,500’ MSL. This uncontrolled airspace is shown as screened brown.

SPECIAL USE AIRSPACE

Special Use Airspace (SUA) confines certain flight activities, restricts entry, or cautions other aircraft operating within specific boundaries. SUA areas are shown in their entirety, even when they overlap, adjoin, or when an area is designated within another area. SUA with altitudes from the surface and above are shown on the IFR Enroute Low Altitude Charts. Similarly, SUA that extends above 18,000' MSL are shown on IFR Enroute High Altitude Charts. IFR Enroute Charts tabulations identify the type of SUA, ID, effective altitudes, times of use, controlling agency and the panel it is located on.

FAA Chart Users’ Guide - IFR Enroute Terms

Users need to be aware that a NOTAM addressing activation will NOT be issued to announce permanently listed times of use.

High and Low Low Altitude Only

P - Prohibited Area MOA - Military Operations Area

R - Restricted Area A - Alert Area *

W - Warning Area

* Alert Areas do not extend into Class A, B, C and D airspace, or Class E airport surface areas.

See Airspace Tabulation on chart for complete information.

OTHER AIRSPACE

FAR 91 Special Air Traffic Rules are shown with the type NO SVFR above the airport name.

FAR 93 Special Airspace Traffic Rules are shown with a solid line box around the airport name, indicating FAR 93 Special Requirements see Chart Supplement.

Mode C Required Airspace (from the surface to 10,000' MSL) within 30 NM radius of the primary airport(s) for which a Class B airspace is designated, is depicted on IFR Enroute Low Altitude Charts as a blue circle labeled MODE C & ADS-B OUT 30 NM.

MO

DE

C

&

AD

S-

B

OU

T

30

N

M

Mode C & ADS-B Out is also required for operations within and above all Class C airspace up to 10,000' MSL, but not depicted. See FAR 91.215 and the AIM.

EXPLANATION OF IFR ENROUTE TERMS › INSTRUMENT AIRWAYS

INSTRUMENT AIRWAYS

The FAA has established two fixed route systems for air navigation. The VOR and LF/MF system-designated from 1,200' Above Ground Level (AGL) to but not including FL 180 is shown on IFR Enroute Low Altitude Charts, and the Jet Route system designated from FL 180 to FL 450 inclusive is shown on IFR Enroute High Altitude Charts.

VOR LF/MF AIRWAY SYSTEM (IFR LOW ALTITUDE ENROUTE CHARTS)

In this system VOR airways - airways based on VOR or VORTAC NAVAIDs - are depicted in black and identified by a "V" (Victor) followed by the route number (e.g., "V12").

LF/MF airways - airways based on LF/MF NAVAIDs - are sometimes called "colored airways" because they are identified by color name and number (e.g., "Amber One", charted as "A1"). In Alaska, Green and Red airways are plotted east and west, and Amber and Blue airways are plotted north and south. Regardless of their color identifier, LF/MF airways are shown in brown.

FAA Chart Users’ Guide - IFR Enroute Terms

AIRWAY/ROUTE DATA

On both series of IFR Enroute Charts, airway/route data such as the airway identifications, magnetic courses bearings or radials, mileages, and altitudes (e.g., Minimum Enroute Altitudes (MEAs), Minimum Reception Altitudes (MRAs), Maximum Authorized Altitudes (MAAs), Minimum Obstacle Clearance Altitudes (MOCAs), Minimum Turning Altitudes (MTAs) and Minimum Crossing Altitudes (MCAs)) are shown aligned with the airway.

As a rule the airway/route data is charted and in the same color as the airway, with one exception. Charted in blue, Global Navigation Satellite System (GNSS) MEAs, identified with a "G" suffix, have been added to "V" and "colored airways" for aircraft flying those airways using Global Positioning System (GPS) navigation.

Airways/Routes predicated on VOR or VORTAC NAVAIDs are defined by the outbound radial from the NAVAID. Airways/ Routes predicated on LF/MF NAVAIDs are defined by the inbound bearing.

• Minimum Enroute Altitude (MEA) - The MEA is the lowest published altitude between radio fixes that assures acceptable navigational signal coverage and meets obstacle clearance requirements between those fixes. The MEA prescribed for a Federal airway or segment, RNAV low or high route, or other direct route applies to the entire width of the airway, segment, or route between the radio fixes defining the airway, segment, or route. MEAs for routes wholly contained within controlled airspace normally provide a buffer above the floor of controlled airspace consisting of at least 300 feet within transition areas and 500 feet within control areas. MEAs are established based upon obstacle clearance over terrain and man-made objects, adequacy of navigation facility performance, and communications requirements.

• Minimum Reception Altitude (MRA) - MRAs are determined by FAA flight inspection traversing an entire route of flight to establish the minimum altitude the navigation signal can be received for the route and for off-course NAVAID facilities that determine a fix. When the MRA at the fix is higher than the MEA, an MRA is established for the fix and is the lowest altitude at which an intersection can be determined.

• Maximum Authorized Altitude (MAA) - An MAA is a published altitude representing the maximum usable altitude or flight level for an airspace structure or route segment. It is the highest altitude on a Federal airway, jet route, RNAV low or high route, or other direct route for which an MEA is designated at which adequate reception of navigation signals is assured.

• Minimum Obstruction Clearance Altitude (MOCA) - The MOCA is the lowest published altitude in effect between radio fixes on VOR airways, off-airway routes, or route segments that meets obstacle clearance requirements for the entire route segment and assures acceptable navigational signal coverage only within 25 statute (22 nautical) miles of a VOR. A MOCA is only shown on the Enroute Low Charts and only published when it is lower than the MEA. When shown, it is preceded by an asterisk.

• Minimum Turning Altitude (MTA) - Minimum turning altitude (MTA) is a charted altitude providing vertical and lateral obstruction clearance based on turn criteria over certain fixes, NAVAIDs, waypoints, and on charted route segments. When a VHF airway or route terminates at a NAVAID or fix, the primary area extends beyond that termination point. When a change of course on VHF airways and routes is necessary, the enroute obstacle clearance turning area extends the primary and secondary obstacle clearance areas to accommodate the turn radius of the aircraft. Since turns at or after fix passage may exceed airway and route boundaries, pilots are expected to adhere to airway and route protected airspace by leading turns early before a fix. The turn area provides obstacle clearance for both turn anticipation (turning prior to the fix) and flyover protection (turning after crossing the fix). Turning fixes requiring a higher MTA are charted with a flag along with accompanying text describing the MTA restriction.

• Minimum Crossing Altitude (MCA) - An MCA is the lowest altitude at certain fixes at which the aircraft must cross when proceeding in the direction of a higher minimum enroute IFR altitude. MCAs are established in all cases where obstacles intervene to prevent pilots from maintaining obstacle clearance during a normal climb to a higher MEA after passing a point beyond which the higher MEA applies. The same protected enroute area vertical obstacle clearance requirements for the primary and secondary areas are considered in the determination of the MCA.

Victor Route (with RNAV/GPS MEA shown in blue)

FAA Chart Users’ Guide - IFR Enroute Terms

AREA NAVIGATION (RNAV) "T" ROUTE SYSTEM

The FAA has created new low altitude area navigation (RNAV) "T" routes for the enroute and terminal environments. The RNAV routes will provide more direct routing for IFR aircraft and enhance the safety and efficiency of the National Airspace System. To utilize these routes aircraft are required to be equipped with IFR approved GNSS. In Alaska, TSO-145a and 146a equipment is required.

Low altitude RNAV only routes are identified by the prefix "T", and the prefix "TK" for RNAV helicopter routes followed by a three digit number (T-200 to T-500). Routes are depicted in blue on the IFR Enroute Low Altitude Charts. RNAV route data (route line, identification boxes, mileages, waypoints, waypoint names, magnetic reference courses and MEAs) will also be printed in blue. Magnetic reference courses will be shown originating from a waypoint, fix/reporting point or NAVAID. GNSS MEA for each segment is established to ensure obstacle clearance and communications reception. GNSS MEAs are identified with a "G" suffix.

Joint Victor/RNAV routes are charted as outlined above except as noted. The joint Victor route and the RNAV route identification boxes are shown adjacent to each other. Magnetic reference courses are not shown. MEAs are charted above the appropriate identification box or stacked in pairs, GNSS and Victor. On joint routes, RNAV specific information will be printed in blue.

UNUSABLE AIRWAY/ROUTE SEGMENTS

Airway/Route segments designated by the FAA as unusable will be depicted as shown below.

Unusable Victor Route

Pilots should not file a flight plan for or accept a clearance that includes navigation on any route or route segment depicted as unusable. Pilots using RNAV may request ATC clearance to fly point-to-point between valid waypoints or fixes, even those on routes depicted as unusable (refer to AC 90-108 for RNAV eligibility).

FAA Chart Users’ Guide - IFR Enroute Terms

Coincident Airways/Routes with Unusable Segment

When two airways/routes are coincident, but only one airway/route is designated as unusable, the following note indicating which airway the unusable symbology applies to will be placed in close proximity to the airway/route identifiers.

OFF ROUTE OBSTRUCTION CLEARANCE ALTITUDE (OROCA)

The Off Route Obstruction Clearance Altitude (OROCA) is depicted on IFR Enroute Low Altitude and Pacific charts and is represented in thousands and hundreds of feet above MSL. OROCAs are shown in every 30 x 30 minute quadrant on Area Charts, every one degree by one degree quadrant for IFR Enroute Low Altitude Charts - U.S. and every two de¬gree by two degree quadrant on IFR Enroute Low Altitude Charts - Alaska. The OROCA is based on the highest known terrain feature or obstruction in each quadrangle, bounded by the ticked lines of latitude/longitude including data 4 NM outside the quadrant. In this example the OROCA represents 12,500 feet.

OROCA is computed just as the Maximum Elevation Figure (MEF) found on Visual Flight Rule (VFR) Charts except that it provides an additional vertical buffer of 1,000 feet in designated non-mountainous areas and a 2,000 foot vertical buffer in designated mountainous areas within the United States. Evaluating the area around the quadrant provides the chart user the same lateral clearance an airway provides should the line of intended flight follow a ticked line of latitude or longitude. OROCA altitudes are not assessed for NAVAID signal coverage, air traffic control surveillance, or communications coverage, and are published for general situational awareness, flight planning, and in-flight contingency use. OROCAs can be found over all land masses and open water areas containing man-made obstructions (such as oil rigs).

MILITARY TRAINING ROUTES (MTRs)

Military Training Routes (MTRs) are routes established for the conduct of low-altitude, high-speed military flight training (generally below 10,000 feet MSL at airspeeds in excess of 250 knots Indicated Air Speed). These routes are depicted in brown on IFR Enroute Low Altitude Charts, and are not shown on inset charts or on IFR Enroute High Altitude Charts. IFR Enroute Low Altitude Charts depict all IFR Military Training Routes (IRs) and VFR Military Training Routes (VRs), except those VRs that are entirely at or below 1,500 feet AGL.

MTRs are identified by designators (IR-107, VR-134) that are shown in brown on the route centerline. Arrows are shown to indicate the direction of flight along the route. The width of the route determines the width of the line that is plotted on the chart:

Route segments with a width of 5 NM or less, both sides of the centerline, are shown by a .02" line.

Route segments with a width greater than 5 NM, either or both sides of the centerline, are shown by a .035" line.

MTRs for particular chart pairs (ex. L1/2, etc.) are alphabetically, then numerically tabulated. The tabulation includes MTR type and unique identification and altitude range.

FAA Chart Users’ Guide - IFR Enroute Terms

FAA Chart Users’ Guide - IFR Enroute Terms

ALASKA CAPSTONE ROUTES (R Routes)

The Alaska Capstone program is an initiative to enhance safety and improve the efficient use of the navigable airspace in Alaska. R Routes are low altitude RNAV Routes that require specific FAA authorization. The routes are published on the L-1 Alaska Low Altitude Enroute Chart. The R Routes and associated notes are published in green with a “R” identifier followed by the route number, followed by a negative “R” identifier. An associated boxed note, also in green, is shown in close proximity to the routes.

JET ROUTE SYSTEM (HIGH ALTITUDE ENROUTE CHARTS)

Jet routes are based on VOR or VORTAC NAVAIDs, and are depicted in black with a "J" identifier followed by the route number (e.g., "J12"). In Alaska, Russia and Canada some segments of jet routes are based on LF/MF NAVAIDs.

AREA NAVIGATION (RNAV) "Q" ROUTE SYSTEM (IFR ENROUTE HIGH ALTITUDE CHARTS)

The FAA has adopted certain amendments to Title 14, Code of Federal Regulations, which paved the way for the development of new area high altitude navigation (RNAV) "Q" routes in the U.S. National Airspace System (NAS). These amendments enable the FAA to take advantage of technological advancements in navigation systems such as the GPS. RNAV "Q" Route MEAs are shown when other than FL 180 MEAs for DME/DME/Inertial Reference Unit (IRU) RNAV aircraft have a "D" suffix.

RNAV routes and associated data are charted in blue."Q" Routes on the IFR Gulf of Mexico charts are shown in black. Magnetic reference courses are shown originating from a waypoint, fix/reporting point, or NAVAID.

Joint Jet/RNAV route identification boxes will be located adjacent to each other with the route charted in black. With the exception of Q-Routes in the Gulf of Mexico, GNSS or DME/DME/IRU RNAV are required, unless otherwise indicated. Q- Routes in Alaska are GNSS Only. Altitude values are stacked highest to lowest.

Joint Jet/RNAV Route

FAA Chart Users’ Guide - IFR Enroute Terms

EXPLANATION OF IFR ENROUTE TERMS › FOREIGN AREAS

FOREIGN AREAS

Limited data is depicted in areas outside the U.S. on all appropriate Enroute U.S., Alaska and Pacific High/Low IFR aeronautical charts. The data provided outside the U.S. is for situational awareness and transition planning. Areas outside of the U.S. have been skeletonized and sybmolized in black and/or a black screen applied. This highlights the intent that U.S. charts should only be used for navigation within domestic airspace and charts of other countries should be used within their respective airspace.

EXPLANATION OF IFR ENROUTE TERMS › TERRAIN CONTOURS ON AREA CHARTS

TERRAIN CONTOURS ON AREA CHARTS

Based on a recommendation of the National Transportation Safety Board, terrain contours have been added to the Enroute Area Charts and are intended to increase pilots' situational awareness for safe flight over changes in terrain. The following Area Charts portray terrain: Anchorage, Denver, Fairbanks, Juneau, Los Angeles, Nome, Phoenix, San Francisco, Vancouver and Washington.

When terrain rises at least a 1,000 feet above the primary airports' elevation, terrain is charted using shades of brown with brown contour lines and values. The initial contour will be 1,000 or 2,000 feet above the airports' elevation. Subsequent intervals will be 2,000 or 3,000 foot increments.

Contours are supplemented with a representative number of spots elevations and are shown in solid black. The highest elevation on an Area Chart is shown with a larger spot and text.

The following boxed note is added to the affected Area Charts.

FAA Chart Users’ Guide - IFR Enroute Terms

EXPLANATION OF IFR ENROUTE TERMS › AIRPORTS

AIRPORTS

Airport Data - Low/High Altitude Civil Charts: High/Low

Civil And Military Charts: High/Low

Military Charts: High/Low

Seaplane - Civil Charts: Low

Heliport Charts: Low

Emergency Use Only Pacific Only

IFR ENROUTE LOW / HIGH ALTITUDE SYMBOLS

(U.S., PACIFIC AND ALASKA CHARTS)

Facilities in BLUE or GREEN have an approved Instrument Approach Procedure and/or RADAR MINIMA published in either the FAA Terminal Procedures Publication or the DoD FLIPs. Those in BLUE have an Instrument Approach Procedure and/or RADAR MINIMA published at least in the High Altitude DoD FLIPs. Facilities in BROWN do not have a published Instrument Procedure or RADAR MINIMA. Facilities in BLACK are foreign airports.

All IAP Airports are shown on the Low Altitude Charts.

Non-IAP Airports shown on the U.S. Low Altitude Charts have a minimum hard surface runway of 3000’.

Airports shown on the U.S. High Altitude Charts have a minimum hard surface runway of 5000’.

Airports shown on the Alaska High Altitude Charts have a minimum hard or soft surface runway of 4000’.

Associated city names for public airports are shown above or preceding the airport name and city name are the same only the airport name is shown. City names for military and private airports are not shown.

The airport identifier in parentheses follows the airport name or Pvt.

Pvt - Private Use

AIRPORT DATA DEPICTION

Low Altitude

1. Airport elevation given in feet above or below mean sea level

2. Pvt - Private use, not available to general public

3. A solid line box enclosed the airport name indicates FAR 93 Special Requirements - see Directory/Supplement

4. “NO SVFR” above the airport name indicates FAR 91 fixedwing special VFR flight is prohibited.

5. or following the airport identifier indicates Class C or Class D Airspace

High Altitude - U.S.

6. Associated city names for public airports are shown above or preceding the airport name. If airport name and city name are the same, only the airport name is shown. The airport identifier in parentheses follows the airport name. City names for military and private airports are not shown.

7. Airport Ident ICAO Location Indicator shown outside contiguous U.S.

8. AFIS Alaska only

High Altitude - Alaska

FAA Chart Users’ Guide - IFR Enroute Symbology

IFR ENROUTE LOW / HIGH ALTITUDE SYMBOLS (U.S., PACIFIC AND ALASKA… › RADIO AIDS TO NAVIGATION

Airports (Continued)

LIGHTING CAPABILITY

Lighting Available

Pilot Controlled Lighting

Part-time or on request

No lighting available At private facilities- indicates no lighting information is available

RADIO AIDS TO NAVIGATION

NAVAIDS VOR VOR/DME TACAN DME NDB NDB/DME Reporting Function Non Compulsory Reporting or Off Airway

Compulsory Reporting

Note: VHF/UHF is depicted in Black. LF/MF is depicted in Brown. RNAV is depicted in Blue

Compass Roses

VHF/UHF LF/MF

Compass Roses are oriented to Magnetic North of the NAVAID that cannot be adjusted to the charted isogonic values.

Compass Locator Beacon LOW ALTITUDE

Chart Example : Enroute Low L-27 US

FAA Chart Users’ Guide - IFR Enroute Symbology

RADIO AIDS TO NAVIGATION (Continued)

LOW ALTITUDE ILS LOCALIZER

ILS Localizer Course with additional navigation function ILS Localizer Back Course with additional navigation function HIGH ALTITUDE - ALASKA VOR/DME RNAV WAYPOINT DATA

Coordinates

Frequency

Identifier Reference Facility Elevation

Radial/Distance (Facility to Waypoint)

ILS Localizer Example with Back Course (Chart: Enroute Low L-1 US)

Continue reading ↓ 120 of 213 passages shown