89 FR 92296 Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
This final rule adopts permanent amendments and a Special Federal Aviation Regulation (SFAR) for a period of ten years to: facilitate the certification of powered-lift pilots, clarify operating rules applicable to operations involving a powered-lift, and finalize other amendments which are necessary to integrate powered-lift into the National Airspace System (NAS). In this final action, the FAA finalizes its alternate framework to stand-up initial groups of powered-lift pilots and flight instructors. Most notably, the FAA adopts alternate frameworks to facilitate the certification of pilots seeking qualifications in a powered-lift with single functioning flight controls and a single pilot station. In response to commenters, the FAA provides clarification for certain operating rules and adopts a performance-based approach to certain operating rules to enable powered-lift operations. In addition to finalizing provisions for powered-lift, this action also makes changes to practical tests in aircraft that require type ratings, including airplanes and helicopters, training center rotorcraft instructor eligibility, training and testing requirements, and training center use of rotorcraft in flight training.
Vol. 89
Thursday,
No. 225
November 21, 2024
Part II
14 CFR Parts 1, 11, 43, et al.
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes; Final Rule
Federal Register / Vol. 89 , No. 225 / Thursday, November 21, 2024 / Rules and Regulations DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Federal Aviation Administration
14 CFR Parts 1, 11, 43, 60, 61, 91, 97, 111, 135, 136, 141, 142, and 194
[Docket No. FAA-2023-1275; Amdt. Nos. 1-78, 11-69, 43-62, 60-8, 61-157, 91-379, 97-1340, 111-2, 135-147, 136-4, 141-26, 142-11, and 194-1] RIN 2120-AL72
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
Agency
AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION: Final rule.
SUMMARY: This final rule adopts permanent amendments and a Special Federal Aviation Regulation (SFAR) for a period of ten years to: facilitate the certification of powered-lift pilots, clarify operating rules applicable to operations involving a powered-lift, and finalize other amendments which are necessary to integrate powered-lift into the National Airspace System (NAS). In this final action, the FAA finalizes its alternate framework to stand-up initial groups of powered-lift pilots and flight instructors. Most notably, the FAA adopts alternate frameworks to facilitate the certification of pilots seeking qualifications in a powered-lift with single functioning flight controls and a single pilot station. In response to commenters, the FAA provides clarification for certain operating rules and adopts a performance-based approach to certain operating rules to enable powered-lift operations. In addition to finalizing provisions for powered-lift, this action also makes changes to practical tests in aircraft that require type ratings, including airplanes and helicopters, training center rotorcraft instructor eligibility, training and testing requirements, and training center use of rotorcraft in flight training.
Dates
DATES: This final rule is effective January 21, 2025, except for amendatory instruction 52 which is effective July 21, 2025.
The incorporation by reference of certain publications listed in this final rule are approved by the Director of the Federal Register as of January 21, 2025.
Addresses
ADDRESSES: For information on where to obtain copies of rulemaking documents and other information related to this final rule, see "How to Obtain Additional Information" in the SUPPLEMENTARY INFORMATION section of this document.
FOR FURTHER INFORMATION CONTACT: For technical questions concerning this action, contact Christina Grabill, AFS-810, Federal Aviation Administration, 800 Independence Ave. SW, Washington, DC 20591; telephone (202) 267-1100; email [email protected].
Supplementary Information
SUPPLEMENTARY INFORMATION:
Table of Contents
I. Executive Summary
A. Purpose of the Regulatory Action
B. Aircraft Certification
C. Airman Certification
D. Operational Requirements
E. International Operation of Powered-Lift
F. Summary of the Costs and Benefits
G. SFAR Framework and Duration II. Authority for This Rulemaking III. Background
I. Executive Summary
A. General
B. Summary of the NPRM
C. General Overview of Comments
D. Differences Between the NPRM and the Final Rule IV. Powered-Lift Type Certification and FSTD Qualification
A. Type Certification
B. Noise Certification
C. Qualification of Powered-Lift Flight Simulation Training Devices (FSTDs) V. Certification of Powered-Lift Pilots
A. Establish a Type Rating Requirement for Persons Seeking To Act as PIC of Powered-Lift
B. Applicability of the Type Rating Requirement to Military Pilots
C. Applicability of the SIC Qualification Requirements of § 61.55 to Powered-Lift
D. Dual Controls Considerations Related to Flight Training and Supervised Operating Experience
E. Supervised Operating Experience of § 61.64
F. Establishment of an Alternate Pathway for Pilot Certification
G. Training in an Approved Program Under Parts 135, 141, and 142
H. Practical Tests
I. Miscellaneous Amendments
J. Part 135 Pilot Qualifications
K. Part 142 Training Centers
L. Subpart K of Part 91 Pilot Qualifications VI. Operational Rules for Powered-Lift
A. Introduction
B. Part 91 Rules for Powered-Lift
C. Part 97 Rules for Powered-Lift
D. Part 135 Rules for Powered-Lift
E. Part 136 Rules for Powered-Lift
F. Part 43 Applicability to Powered-Lift
G. Pilot Records Database VII. Air Traffic Operations VIII. International Operations for Powered-Lift
A. Personnel Licensing
B. Operations of Aircraft
C. Airworthiness of Aircraft IX. Advanced Air Mobility X. SFAR Framework and Duration XI. Autonomous Powered-Lift XII. Comments to Regulatory Impact Analysis XIII. FAA Readiness XIV. Definitions
A. Definition of Powered-Lift
B. Definition of Flight Modes
C. Definition of Heliport
D. Definition of Autorotation XV. Other Comments Related to Powered-Lift
A. Other Comments Related to Language or Definitions in the Powered-Lift NPRM
B. Safety Systems or Procedures Not Addressed in the NPRM
C. Other Comments Related to Powered-Lift Design
D. Congressional Comments XVI. Related Rulemakings XVII. Severability XVIII. Regulatory Notices and Analyses
A. Summary of the Regulatory Impact Analysis
B. Regulatory Flexibility Act
C. International Trade Impact Assessment
D. Unfunded Mandates Assessment
E. Paperwork Reduction Act
F. International Compatibility
G. Environmental Analysis
H. Regulations Affecting Intrastate Aviation in Alaska
I. Congressional Review Act XIX. Executive Order Determinations
A. Executive Order 14036, Promoting Competition in the United States Economy
B. Executive Order 13985, Advancing Racial Equity and Support for Underserved Communities Through the Federal Government
C. Executive Order 13132, Federalism
D. Executive Order 13175, Consultation and Coordination With Indian Tribal Governments
E. Executive Order 13211, Regulations That Significantly Affect Energy Supply, Distribution, or Use
F. Executive Order 13609, Promoting International Regulatory Cooperation XX. Additional Information
A. Electronic Access and Filing
B. Small Business Regulatory Enforcement Fairness Act
List of Abbreviations and Acronyms Frequently Used in This Document
List of Abbreviations and Acronyms Frequently Used in This Document
Abbreviations and Acronyms Used in This Document
ACO--Aircraft Certification Office ACS--Airman Certification Standards APD--Aircrew Program Designee AIH--Aviation Instructor's Handbook AQP--Advanced Qualification Program ATC--Air Traffic Control ATP--Airline Transport Pilot ATO--Air Traffic Organization CAMP--Continuous Airworthiness Maintenance Program CFIT--Controlled Flight Into Terrain CFR--Code of Federal Regulations CLOA--Certificate and Letter of Authority CVR--Cockpit Voice Recorder DPE--Designated Pilot Examiner GPS--Global Positioning System GPWS--Ground Proximity Warning Systems ELT--Emergency Locator Transmitter ERT--Extended Review Team FDR--Flight Data Recorder FFS--Full Flight Simulator FSB--Flight Standardization Board FSBR--Flight Standardization Board Report FSTD--Flight Simulation Training Device FTD--Flight Training Device HAA--Helicopter Air Ambulance HTAWS--Helicopter Terrain Awareness Warning System ICAO--International Civil Aviation Organization IFR--Instrument Flight Rules IMC--Instrument Meteorological Conditions IOE--Initial Operating Experience IPC--Instrument Proficiency Check LOA--Letter of
Abbreviations and Acronyms Used in This Document
Authorization LOFT--Line Oriented Flight Training MDA--Minimum Descent Altitude MCTW--Maximum Certificated Takeoff Weight MEL--Minimum Equipment List MFD--Multifunction Display MGTOW--Maximum Gross Takeoff Weight MMEL--Master Minimum Equipment List NAS--National Airspace System NPRM--Notice of Proposed Rulemaking NM--Nautical Mile NSP--National Simulator Program NTSB--National Transportation Safety Board OEM--Original Equipment Manufacturer PA--Public Address System PDP--Professional Development Program PIC--Pilot in Command PFD--Primary Flight Display POI--Principal Operations Inspector PTS--Practical Test Standards QPS--Qualification Performance Standards RPA--Rules of Particular Applicability SARPs--Standards and Recommended Practices SFAR--Special Federal Aviation Regulation SIC--Second in Command SLF--Supervised Line Flying SOE--Supervised Operating Experience SVO--Simplified Vehicle Operations TAPL--Technically Advanced Powered-Lift TAWS--Terrain Awareness and Warning System TC--Type Certificate TCE--Training Center Evaluator TCDS--Type Certificate Data Sheet VFR--Visual
Flight Rules VMC--Visual Meteorological Conditions VTOL--Vertical Takeoff and Landing
I. Executive Summary
This final rule establishes the requirements for pilot certification and operation of powered-lift. Powered-lift are defined in title 14 of the Code of Federal Regulations (14 CFR) part 1 as heavier-than-air aircraft capable of vertical takeoff, vertical landing, and low speed flight that depends principally on engine-driven lift devices or engine thrust for lift during these flight regimes and on nonrotating airfoil(s) for lift during horizontal flight. Powered-lift are capable of vertical takeoff and landing (VTOL) while being able to fly like an airplane during cruise flight. Currently, there are no type-certificated powered-lift in civil operations; however, there are several applicants seeking type certificates for such aircraft.
I. Executive Summary
Several of the powered-lift that the FAA expects to enter the civilian market have complex and unique design, flight, and handling characteristics with varying degrees of automation. The FAA anticipates that these aircraft will conduct an array of different operations, such as transporting crew and material to offshore oil rigs, transporting passengers from point-to-point as an air ambulance, and transporting passengers in concentrated urban environments.
To safely integrate powered-lift in the national airspace system (NAS), the FAA is making permanent changes to parts 61, 135, and 142 to train and certificate powered-lift pilots and instructors, as well as issuing a temporary Special Federal Aviation Regulation (SFAR) that supplements existing rules, creates temporary alternatives for airman certification, removes operational barriers, and mitigates safety risks for powered-lift. As discussed in section X of this preamble, the duration of the SFAR is 10 years.
Powered-lift will also be utilized to support the deployment of advanced air mobility (AAM) operations. AAM is an umbrella term for an air transportation system that moves people and cargo using revolutionary new aircraft. The AAM Coordination and Leadership Act defines AAM as "a transportation system that transports people and property by air between two points in the United States using aircraft with advanced technologies, including electric aircraft or electric vertical take-off and landing aircraft, in both controlled and uncontrolled airspace." The FAA Reauthorization Act of 2024 updated the definition to mean "a transportation system that is comprised of urban air mobility and regional air mobility using manned or unmanned aircraft." \1\ Congress directed the Department of Transportation to establish an advanced air mobility working group to plan for and coordinate efforts necessary for maturation of the AAM ecosystem in the United States through the Advanced Air Mobility Coordination and Leadership Act. This rulemaking is an important step in facilitating the integration of powered-lift and AAM into the NAS.
\1\ FAA Reauthorization Act of 2024, Pub. L. 118-63 (May 16, 2024). The media often refer to these operations as "air taxis"; however, this term is used only in the context of 14 CFR chapter II (pertaining to DOT-specific regulations). Consequently, throughout this preamble, the FAA refers to these operations as passenger-carrying operations or air carrier operations.
A. Purpose of the Regulatory Action
A. Purpose of the Regulatory Action
This final rule addresses regulatory barriers to introducing powered-lift as a new category of aircraft into operations in the NAS. The final rule creates an alternate pathway for pilot certification and enables operations under parts 91 (General Operating and Flight Rules), 97 (Standard Instrument Procedures), 135 (Commuter and On-Demand Operations), and 136 (Commercial Air Tours).
The existing regulations in part 61 for training and certificating powered-lift flight instructors and pilots do not adequately address the unique challenges of introducing a new category of aircraft to civil operations. First, the existing regulations did not anticipate the diversity in design of the powered-lift that are working through the aircraft certification process. Second, there are challenges with applying existing aeronautical experience requirements to train and certificate the initial cadre \2\ of powered-lift flight instructors and pilots. In addition, part 135 regulations for certain commercial operations do not contain specific requirements addressing the qualifications for powered-lift pilots. Therefore, current part 135 pilot qualification requirements that apply to pilots of airplanes and helicopters need to be amended to include powered-lift pilots to close the safety gap.
\2\ The FAA uses the term "initial cadre" throughout this preamble. In some instances, initial cadre refers to a sufficient number of instructors and evaluators to train and qualify pilots for powered-lift ratings under an approved training program under part 135, 141, or 142. In other instances, the term refers to a sufficient number of pilots who are rated in powered-lift to meet the demands of the market.
In addition, to address an operational safety risk that exists because the current regulatory framework governing operations does not contemplate powered-lift, changes had to be made to certain operational rules. There are myriad operational rules under parts 91, 97, 135, and 136 that currently apply to "airplanes," "helicopters," and/or "rotorcraft" that should also apply to powered-lift.
Industry has expressed its intent to introduce these aircraft immediately into passenger-carrying commercial operations under part 135, making the need to reconsider the existing airman certification standards and operating regulations for powered-lift and address the absence of specific regulations for pilots in part 135 more urgent. The FAA requires and the public expects that commercial operations be conducted with the highest regard for safety and by pilots who have the requisite experience flying the particular category of aircraft in which paying passengers will be transported. As a result, this rulemaking is necessary to ensure that pilots for these aircraft are properly trained and that these rapidly developing aircraft can safely integrate and operate within the NAS.
The following sections discuss the provisions being adopted in this final rule.
B. Aircraft Certification
B. Aircraft Certification
The FAA did not establish any new requirements for the type certification of powered-lift, nor did it revise existing type certification requirements. The FAA determined that existing aircraft certification requirements are sufficient to type certificate powered-lift as a special class under § 21.17(b). The special class process allows the FAA to address the novel features of unique and nonconventional aircraft without the need for additional processes such as special conditions or exemptions that would be required if the FAA used the airworthiness standards already in place. The aircraft certification requirements and comments the FAA received are discussed in more detail in section IV.A. of this preamble.
C. Airman Certification
C. Airman Certification
To maintain a level of safety commensurate with that expected for airplanes and helicopters, the FAA adopts new requirements for pilots to hold type ratings for each powered-lift they fly and qualification requirements for powered-lift pilots serving in part 135 operations. To address the obstacles to airman certification, the FAA provides alternatives to certain requirements in part 61 through the establishment of a new part 194, Special Federal Aviation Regulation No. 120--Powered-Lift: Pilot Certification and Training; Operations Requirements, to facilitate the training and certification of the initial cadre of powered-lift instructors and pilots. In addition to this alternate framework, the FAA adopts several pathways to certificate powered-lift pilots utilizing aircraft with a single flight control and single pilot station. The FAA is facilitating this through three options: (1) recognition of a single flight control that is accessible by both the student and flight instructor and allows for the instructor to immediately intervene if necessary; (2) expanded use of simulators to allow an applicant to train in a simulator and gain necessary experience solo in the aircraft; and (3) deviation authority for consideration of future advancements in technology that is not currently validated at this time. 1. Type Rating
The FAA did not establish classes within the powered-lift category because each powered-lift can have different configurations, unique inceptors, diversified flight controls, and distinctive operating characteristics. Further, the FAA lacks sufficient operational data to identify commonality to establish classes within the powered-lift category because powered-lift are still in the development phase. The FAA finds that reasons for not establishing class ratings persist, and the final rule adopts the proposal for all powered-lift pilot in commands (PICs) to hold a type rating. 2. Flight Instructors
The FAA recognizes that, once the first powered-lift achieve type certification, there will be an insufficient number of qualified flight instructors to provide training to the pilots who will need to obtain certificates and ratings necessary to serve in powered-lift operations. For this reason, the FAA is allowing certain pilots employed by the manufacturer to obtain the necessary training and experience for powered-lift through the test flights and crew training activities necessary for aircraft certification. Once the manufacturer's personnel obtain the necessary ratings, they would form the initial cadre of instructors who could conduct certification training in the manufacturer's aircraft for certain instructor personnel at part 141 pilot schools, part 142 training centers, and part 135 operators. These instructors under parts 141, 142, and 135 would then develop the curricula for the initial powered-lift training at their respective organizations and conduct certification training at their respective certificate holders. The FAA finalizes this alternate framework for test pilots and instructor pilots to facilitate certification training as proposed. 3. Alternate Framework for Pilot Certification
Even with sufficient qualified flight instructors, the existing airman certification rules for powered-lift present barriers for persons seeking to accomplish the training and experience necessary to obtain the certificates and ratings for commercial operations. In response to industry concerns, the FAA adopts alternate requirements for meeting PIC flight time and cross-country flight time requirements in part 61 and expanding the opportunity for pilots to obtain powered-lift ratings at the commercial pilot certificate level through part 135 training programs. Most of the alternative requirements would be available only to pilots who already hold a commercial pilot certificate and an instrument rating for another category of aircraft. In addition, although no flight simulation training devices (FSTDs) representing powered-lift are currently qualified, the FAA anticipates near-term qualification of such devices and proposed allowing increased flight training opportunities through simulation. This final rule adopts the alternate aeronautical experience and cross-country requirements, as proposed, with some minor alterations.
In addition, as explained more fully in section V.F., this final rule reduces the PIC flight time in a powered-lift at the commercial pilot certificate level from 50 hours to 35 hours, of which 15 hours may still be in a Level C or higher full flight simulator (FFS). 4. Part 135 Qualifications
The FAA adopts permanent changes to training and qualification requirements for pilots to align with the requirements for powered-lift with those established for pilots of airplanes and rotorcraft in part 135. The proposals included Airline Transport Pilot (ATP) certification and operating experience in the make and model of powered-lift for PICs in commuter operations, part 121 Advanced Qualification Program (AQP) training requirements for pilots who serve in commuter operations in certain powered-lift, and instrument ratings for all powered-lift pilots in part 135 operations. In addition to allowing a part 135 operator to develop and provide training for powered-lift pilot certification at the commercial pilot level, the FAA is permitting successful completion of part 135 pilot checks to be used to meet the practical test requirements for powered-lift ratings subject to certain conditions.
Overall, the FAA finalizes the proposed requirements regarding integration of powered-lift pertaining to part 135 qualifications without substantial changes from what was proposed in the NPRM. In response to commenters, the FAA made certain editorial changes to add clarification and better enable powered-lift training and testing that would have otherwise created obstacles. 5. Dual Controls
The FAA noted in its proposal that it was retaining the powered-lift category and proposed alternate aeronautical experience and logging requirements to allow certain groups of pilots to attain the necessary aeronautical experience. In accordance with flight training requirements under § 91.109 and the requirements for supervised operating experience (SOE) in § 61.64, the powered-lift would be required to have a dual set of controls to accomplish the aeronautical experience required in an aircraft and SOE.
After consideration of the comments received, the FAA is adopting several pathways to enable the use of a powered-lift without dual controls. The first pathway permits flight training in a powered-lift with a single set of flight controls accessible by both student and instructor (e.g., a throwover control). The second pathway allows all flight training to be conducted in an approved simulator, culminating in solo aeronautical experience in a powered-lift with a single set of flight controls subject to certain conditions and limitations set forth in a new appendix to part 194. This pathway allows an Original Equipment Manufacturer (OEM) to utilize a Level C or higher FFS to conduct the required flight training in accordance with part 61 and part 194. The pilot can gain the necessary experience through a series of demonstration flights and solo experience, complete a practical test in a Level C FFS, and then conduct abbreviated operating experience in the powered-lift to become fully qualified and fly in the NAS. Finally, the third pathway permits the FAA to issue deviation authority to facilitate flight training in a powered-lift with a single set of flight controls in the NAS based on future demonstrated and validated advancements in technology.
The FAA makes conforming amendments in light of these alternate pathways to the supervised operating experience requirements and in part 135. Specifically, this final rule adopts certain alternate provisions to facilitate supervised operating experience in a powered-lift with a single set of controls and a single pilot seat. Additionally, this final rule revises current requirements for instructor training that is accomplished from either pilot station to provide a feasible pathway for approved part 135 training programs, pilots, instructors, and check airman operating only with one pilot station and/or set of flight controls. 6. Impacts to Rotorcraft Training at Part 142 Training Centers
The FAA adopts permanent changes that, in addition to establishing requirements for powered-lift, would affect certain part 142 training in FSTDs for rotorcraft. These proposed changes would harmonize requirements for airplanes, powered-lift, and rotorcraft in part 142, specifically for pilot training in an FSTD that represents an aircraft requiring a type rating. This final rule applies the ATP aeronautical experience requirements to FSTD instructors in airplanes and helicopters requiring a type rating, powered-lift weighing over 12,500 pounds, and turbojet powered powered-lift rather than all aircraft requiring a type rating. In some instances, these adopted changes provide additional flexibility to training and qualification for rotorcraft instructors consistent with allowances for airplane instructors and provide training and testing for rotorcraft instructors that is more specifically focused on rotorcraft, instead of airplanes.
D. Operational Requirements
D. Operational Requirements
To mitigate the safety gaps that exist due to the absence of operational regulations specifically applicable to powered-lift, the FAA proposed, through the SFAR, to apply specific airplane, rotorcraft, and helicopter rules contained in parts 43, 91, 97, 135, and 136 to powered-lift as appropriate. In the proposal, the FAA determined that applying the airplane rules in most instances was a safer, more conservative approach, especially given the lack of powered-lift operational data. Notwithstanding, in some instances, for example under part 136, the FAA determined that applying the helicopter or rotorcraft rules were appropriate and provided an equivalent level of safety.
Specifically, the FAA initially proposed using the visual flight rules (VFR) fuel requirements specified for airplanes for both operations conducted under parts 91 and 135. After considering comments received, the FAA is adopting different requirements than proposed related to fuel reserves when conducting VFR operations. The SFAR now stipulates helicopter minimums for powered-lift capable of conducting a landing in the vertical-lift flight mode along the entire route of flight. Powered-lift that are not capable of conducting a landing in the vertical-lift flight mode along the entire route of flight must meet airplane minimums.
In addition, the FAA initially proposed using the instrument flight rules (IFR) fuel requirements specified for airplanes for operations conducted under parts 91 and 135. The SFAR now permits the use of helicopter minimums stipulated for powered-lift that are authorized to conduct Copter Procedures and that have the performance capability, as provided in the Aircraft Flight Manual (AFM), to conduct a landing in the vertical-lift flight mode for the entire flight. Powered-lift that do not meet these criteria will be required to meet the airplane minimums.
The FAA also proposed using the VFR visibility requirements prescribed for airplanes. The final rule states that helicopter minimums are applicable if the powered-lift is operated in the vertical-lift flight mode and is operated at a speed that allows the pilot adequate opportunity to see any other traffic or obstructions in time to avoid a collision. If either of those requirements are not met, then the airplane minimums apply.
Finally, the FAA proposed using the general aircraft minimum safe altitudes for operations conducted under parts 91 and 135, rather than allowing powered-lift to utilize helicopter exclusions. The final rule provides that powered-lift operating in vertical-lift flight mode that have demonstrated a capability to autorotate or conduct an approved equivalent maneuver are allowed the same minimum safe altitudes as those afforded to helicopters. However, for part 135 operations, it is important to note that the minimum altitude cannot be lower than 300 feet above the surface. When a powered-lift is operating in the vertical-lift flight mode and is certificated to conduct an autorotation or an approved equivalent maneuver to a landing, then helicopter minimum safe altitudes or lowest altitude published in the AFM apply.
Under part 136, the FAA proposed applying the operational requirements specific to helicopter operations within part 136 to powered-lift operations because the FAA anticipated powered-lift will hover and operate similarly to helicopters when conducting air tours, except when relying on wing-borne flight. In the final rule, as addressed in section VI.E. of this preamble, "Part 136 Rules for Powered-Lift," the FAA applies some provisions in part 136 to powered-lift regardless of the flight mode in which the aircraft is operating because the FAA determined those provisions--such as requiring flotation equipment--should apply to powered-lift regardless of whether they are operating in the vertical-lift or wing-borne flight mode.
The FAA will allow powered-lift operators to use Copter Procedures as defined in part 97 if the aircraft has been type-certificated and equipped to utilize those procedures. That capability will be identified in the limitations section of the AFM along with any other specific limitations and procedures necessary for safe operation of the aircraft.
The FAA has made a permanent change to the regulatory requirements for the Pilot Records Database contained in part 111 to include powered-lift as a qualifying aircraft to meet the threshold requirement of whether a person operating in furtherance of a business needs to report pilot records to the Pilot Records Database.
For purposes of maintenance, preventive maintenance, rebuilding, and alteration, the FAA proposed to apply the current requirements under part 43, with only two modifications. First, the FAA proposed to apply the preventive maintenance requirements available to certificate holders operating rotorcraft under part 135 in remote areas to certificate holders similarly operating powered-lift. Second, the FAA proposed that in lieu of complying with § 43.15(b), each person performing an inspection required by part 91 on a powered-lift, must inspect "critical parts" (as defined under Sec. § 27.602 and 29.602) in accordance with the maintenance manual or Instruction for Continuous Airworthiness, or as otherwise approved by the Administrator. The FAA is adopting these requirements as proposed.
The operational requirements and comments the FAA received are discussed in more detail in section VI.F. of this preamble.
E. International Operation of Powered-Lift
E. International Operation of Powered-Lift
In keeping with U.S. obligations under the Convention on International Civil Aviation, it is FAA policy to conform to International Civil Aviation Organization (ICAO) Standards and Recommended Practices (SARPs) to the maximum extent practicable. In this final rule, the FAA amends part 61 to require powered-lift pilots to have a type rating, which meets the standards outlined in ICAO Annex 1, Personnel Licensing. Under parts 91 and 135, the FAA requires U.S. operators to comply with ICAO Annex 2, Rules of the Air, when operating over the high seas or when operating within a foreign country.\3\ ICAO Annex 8, Airworthiness of Aircraft, is silent on powered-lift; however, the FAA designates powered-lift as special class aircraft for type certification in accordance with § 21.17(b) and applies airworthiness criteria that meet an equivalent level of safety to the FAA's existing airworthiness standards and are consistent with the intent of ICAO Annex 8 to the Chicago Convention. Accordingly, U.S. operators of powered-lift that are type-certificated with a standard airworthiness certificate and conduct their operations in accordance with the standards outlined in Annex 2 would be eligible to operate over the high seas. The requirements for the international operation of powered-lift and comments the FAA received are discussed in more detail in section VIII.B. of this preamble.
\3\ See 14 CFR 91.703. To note, § 91.703(a)(2) requires each person operating a civil aircraft of U.S. registry outside the U.S. when within a foreign country to comply with the regulations relating to the flight and maneuver of aircraft there in force and, with narrow exceptions, comply with 14 CFR part 91 so far as it is not inconsistent with the applicable regulations of the foreign country where the aircraft is operating or Annex 2.
F. Summary of the Costs and Benefits
F. Summary of the Costs and Benefits
Operations with powered-lift are anticipated to offer benefits over traditional airplanes and rotorcraft. A report published by the U.S. Government Accountability Office (GAO) stated that many of these newer kinds of aircraft could be easier to design, simpler to construct, less complicated to maneuver, quieter to fly, and more economical to operate compared to traditional aircraft.\4\ Many use cases for these aircraft are envisioned, and this rulemaking is a step toward those use cases coming to realization.
\4\ Transforming Aviation: Stakeholders Identified Issues to Address for `Advanced Air Mobility' [verbar] U.S. GAO, www.gao.gov/assets/gao-22-105020.pdf.
Several problems exist absent this rulemaking. The first is that only operating rules applicable to powered-lift are those specific to "aircraft," which introduces a substantial safety gap in part 91 and part 135 operations. This safety gap does not exist for parts 91 and 135 operations conducted with airplanes, helicopters, and rotorcraft because decades of FAA rulemaking has resulted in a continuum of rules establishing minimum safety standards for operations conducted with these aircraft. A similar suite of category-specific rules simply does not exist for powered-lift because these are new and novel aircraft that have yet to be type-certificated for operations in the NAS. Consequently, powered-lift would not be required to operate at the level of safety required of operations conducted with airplanes, helicopters, or rotorcraft.
The second problem is challenges presented by the existing airmen certification regulations. Unlike the extensive infrastructure in place for the training and certification of airplane and rotorcraft pilots and instructors, the resources to scale powered-lift training and certification of pilots and instructors is scant due to the lack of powered-lift flight instructors and FAA-certificated aircraft available for airman training and testing (and operations). Without this rulemaking, civilian pilots will be unable to obtain powered-lift ratings necessary for industry to scale operations intended for these new and novel aircraft.
The third problem absent this SFAR are the requirements for acting as PIC of a powered-lift operation. Should type-certificated powered-lift become available before this rule is finalized, individuals holding an airman certificate with a powered-lift category rating would be permitted to act as PIC of powered-lift operations. Taking into consideration the variation in operating characteristics for each powered-lift coming to the civilian market, a powered-lift category rating would not adequately prepare an individual to act as PIC of a powered-lift operation.
While operators choosing to conduct operations with powered-lift will incur costs to comply with regulations in this SFAR, these costs are on a scale equivalent to those incurred by operators choosing to conduct operations with airplanes or rotorcraft under similar regulations. Likewise, costs imposed on individuals that choose to accomplish the training and testing required to hold an airman certificate with a type rating in the powered-lift category are on a scale equivalent to those incurred by individuals accomplishing training and testing to hold an airman certificate with a type rating in the airplane or rotorcraft category. In other words, the costs imposed on operators and individuals that choose to comply with regulations finalized by this rule will be no more burdensome than the costs incurred by entities and individuals complying with corresponding airplane and rotorcraft regulations that are already in effect. Additionally, the FAA has provided some performance-based options in certain rules that could reduce the burden on industry as compared to the comparable prescriptive requirements of the proposed rule.
The provisions in this SFAR can generally be grouped by those rules affecting airman certification and those rules enabling powered-lift to conduct operations under parts 91, 97, 135, and 136. For certification of airmen with a type rating in powered-lift, the FAA allows alternative aeronautical experience and logging requirements. For the operational rules, the FAA applies specific airplane, rotorcraft, or helicopter rules to powered-lift, as appropriate. The FAA has considered each finalized regulation in the SFAR to determine its economic impact. An overview of this analysis is included in the Regulatory Evaluation portion of this preamble. A regulatory impact analysis has also been prepared for the finalized SFAR and can be found in the docket for this rule.
The following table presents a summary of the primary estimate for which data was available to monetize the costs of this rule, as well as estimates for a pessimistic and optimistic scenario. The monetized costs include incremental costs for individuals to hold an airman's certificate with a type rating for the powered-lift flown, costs for the minimum fuel reserve requirement, and costs for the provision of dual-control aircraft and full flight simulators for training. For the primary estimate, over a 10-year period of analysis, this rule would result in present value costs of about $914.2 million at a two percent discount rate with annualized costs of about $101.8 million.\5\ Additional details are provided in the Regulatory Evaluation section of this SFAR and in the regulatory impact analysis available in the docket for this rulemaking.
\5\ Monetized costs for the rule stem from the cadence of aircraft deliveries. In the optimistic scenario, aircraft deliveries are forecast to begin in year 1 and continue through year 10. Aircraft deliveries for the base scenario are forecast to occur during years 2-10, and in the pessimistic scenario during years 3-10. As a result, costs for the optimistic scenario accumulate over a period of 10 years versus the base and pessimistic scenarios, over which costs accumulate for a period of 9 years and 8 years, respectively.
Table 1--Monetized Costs of SFAR
[Millions $]
10-Year
Forecast scenario present value Annualized
Base--Primary Estimate … $914.2 $101.8
Pessimistic … 865.5 96.4
Optimistic … 966.1 107.6
G. SFAR Framework and Duration
G. SFAR Framework and Duration
This final rule enables powered-lift operations for a limited duration and provides the FAA an opportunity to assess the operations and establish a comprehensive regulatory scheme. This final rule adopts both limited permanent changes and a time-limited SFAR to facilitate powered-lift operations. The SFAR permits the FAA to gather data--via established approved information collections, regulatory requirements, and informal anecdotal information and observations--and better understand what a comprehensive permanent regulatory framework should look like.
Further, the FAA notes that section 955(c) of the FAA Reauthorization Act of 2024 (Pub. L. 118-63) mandates that the FAA establish an aviation rulemaking committee (ARC) no later than three years after the FAA issues the first commercial operating certificate to a powered-lift, to provide the Administrator with specific findings and recommendations for, at a minimum, the creation of a standard pathway for the performance-based certification of powered-lift aircraft; the certification of airmen capable of serving as pilot-in-command of a powered-lift; and operation of powered-lift in commercial service and air transportation. Section 955(d) requires the FAA to initiate a rulemaking no later than 270 days after the ARC submits its report. Not only does this language impose a timeline for establishing the ARC and subsequent rulemaking, it acknowledges that an ARC will first need real-world operational data from commercial powered-lift operations before it can provide informed recommendations for a permanent rulemaking.
Because the SFAR will affect several parts of 14 CFR, the FAA has determined that the most clear and comprehensive regulatory approach is through the creation of a new part to wholly contain the SFAR. Specifically, the FAA is adding a new part 194, titled "Special Federal Aviation Regulation No. 120--Powered-Lift: Pilot Certification and Training; Operations Requirements," to 14 CFR under new subchapter L, titled "Other Special Federal Aviation Regulations." New part 194 utilizes the traditional regulatory structure to supplement existing rules, creates temporary alternatives for airman certification, removes operational barriers, and mitigates safety risks for powered-lift. As a result, requisite applicability revisions are made to parts 43, 60, 61, 91, 97, 111, 135, 136, 141, and 142 to clearly communicate that current regulations are intended to operate in tandem with part 194, as subsequently discussed in this preamble.
This SFAR will remain in effect for ten years after this final rule becomes effective. In selecting ten years as the appropriate duration for this SFAR, the FAA considered a number of factors including the time it will take to initiate operations after this final rule becomes effective and the type certification status of the powered-lift that are commercially viable. As discussed in section I.G. of this preamble ("SFAR Framework and Duration"), the FAA has determined that a ten-year period is an appropriate length of time to collect operational data from powered-lift operations. This data will inform a subsequent rulemaking to implement permanent amendments.
II. Authority for This Rulemaking
II. Authority for This Rulemaking
The FAA's authority to issue rules on aviation safety is found in Title 49 of the United States Code. Subtitle I, Section 106 describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the FAA's authority.
The FAA is issuing this final rule under the authority described in Subtitle VII, Part A, Subpart i, Section 40113, Administrative, and Subpart iii, Section 44701, General Requirements; Section 44702, Issuance of Certificates; Section 44703, Airman Certificates; Section 44704, Type Certificates, Production Certificates, Airworthiness Certificates, and Design and Production Organization Certificates; Section 44705, Air Carrier Operating Certificates; and Section 44707, Examination and Rating Air Agencies. Under these sections, the FAA prescribes regulations and minimum standards for practices, methods, and procedures necessary for safety in air commerce, including the authority to examine and rate civil schools and prescribe regulations to ensure the competency of instructors. The FAA is also authorized under these sections to issue certificates, including airman certificates, type certificates, and air carrier operating certificates, in the interest of safety.
This rulemaking is also issued under the authority described in Subtitle VII, Part A, Subpart iii, Section 44712, Emergency Locator Transmitters; Section 44713, Inspection and Maintenance; Section 44715, Noise and Sonic Boom; Section 44716, Collision Avoidance Systems; and Section 44722, Winter conditions. These sections direct the Administrator to prescribe regulations to govern the use of emergency locator transmitters and collision avoidance systems, the standards for inspecting and performing maintenance on aircraft, and regulations to control aircraft noise and safety risks related to winter conditions, respectively.
Section 955 of the FAA Reauthorization Act of 2024 (Pub. L. 118-63) requires that, within seven months of the date of enactment of the Act, the FAA publish a final rule finalizing the notice of proposed rulemaking entitled "Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes." Section 955 requires that, with respect to any powered-lift aircraft type certificated by the FAA, the regulations must provide a practical pathway for pilot qualification and operations; establish performance-based requirements for energy reserves and other range- and endurance-related requirements that reflect the capabilities and intended operations of the aircraft; provide for a combination of pilot training requirements, including simulators, to ensure the safe operation of powered-lift; and to the maximum extent practicable, align powered-lift pilot qualifications with section 2.1.1.4 of Annex 1 to the Chicago Convention. Additionally, as required by section 955(a)(3)(B), the FAA must ensure coordination with the Department of Defense (DoD).
In this rule, the FAA provides practical pathways for pilots to qualify to operate powered-lift, establishing pathways for pilots with military experience, airline transport pilot and commercial experience, and flight instruction experience to gain experience in the operation of these aircraft, providing them with sufficient foundations to safely conduct passenger-carrying operations. These multiple pathways will give pilots of diverse backgrounds and prior experience opportunities to enter this emerging aviation sector. For further information on pilot pathways see section V. of this preamble.
Also, in recognition of the comments received, the FAA has revised requirements related to fuel and energy reserves to provide greater flexibility for operations conducted under certain parameters. Specifically, the SFAR outlines performance-based requirements that allow powered-lift operators to use certain helicopter operating rules as long as the operator complies with the appropriate risk mitigations that are detailed in the rule. For example, an operator may use the helicopter fuel requirements under § 91.151 if the powered-lift is continuously capable of conducting a landing in the vertical-lift flight mode along the entire route of flight. For further information, see section VI. of this preamble.
Further, based on comments received to the NPRM, the FAA has significantly expanded the ability of manufacturers and operators to use flight simulation training devices in the training and qualification of pilots, recognizing the significant advancements in flight simulation technology and pilot training. This includes providing an opportunity for a pilot applicant to credit certain experience in a simulator in addition to outlining a pathway for pilot certification greatly expanding the use of simulation when a powered-lift has a single functioning flight control. For further information on these provisions, see sections IV. and V. of this preamble.
The FAA has considered the provisions of section 2.1.1.4 of Annex 1 to the Chicago Convention and ensured that the requirements in this rule related to pilot certification and operations are responsive to the intent of that section of the Annex. The FAA carefully considered implementation of section 2.1.1.4 and found it impracticable to disrupt the FAA's traditional airman certification framework by the addition of a type rating within a wholly different aircraft category to an existing certificate with a different category rating. However, through this SFAR, the FAA chose to facilitate alternative measures for a pilot to directly receive a powered-lift category rating and a powered-lift type rating. Similar to the conditions set forth in ICAO's transitional recommendation, these alternative measures to receive a powered-lift category and type rating would be completed during training provided under an approved or proposed training curriculum and would take previous experience of an applicant in an airplane or helicopter into account. Considering the flexibilities extended in the final rule, FAA believes it has aligned with section 2.1.1.4 to the maximum extent practicable while maintaining safety and consistency with its existing regulatory structure. For further discussion, see section V.A. of this preamble.
Based on the foregoing authorities, the FAA makes amendments to clarify the rule and corrects inadvertent errors contained in the NPRM. These are explained in more detail throughout this final rule. Amendments correcting for clarity, correctness, and grammar are not substantive in nature and are a logical outgrowth of the NPRM.
The FAA also makes minor technical amendments to its regulations that are discussed throughout this preamble. The FAA finds that notice and comment is unnecessary for these technical changes.\6\
\6\ Further, technical amendments are "a routine determination, insignificant in nature and impact, and inconsequential to the industry and to the public." See Mack Trucks, Inc. v. EPA, 682 F.3d 87, 94 (D.C. Cir. 2012) [verbar] (quotation marks and citation omitted); See also United States v. Mullins, 2012 WL 3777067, at *4 (D. Vt. Aug. 29, 2012) (explaining that public comment is unnecessary if minor or merely technical amendments in which the public is not particularly interested were involved).
Additionally, in this final rule, the FAA revised certain sections of the proposed rule to account for FAA Test Pilots and Aviation Safety Inspectors (ASIs). Providing notice and seeking comment on these changes is not required as they are rules of agency organization, practice, or procedure under 5 U.S.C. 553(b)(A).
Finally, in accordance with § 955(a)(3)(B), the FAA has consulted with the DoD on a host of issues regarding powered-lift, including the United States Air Force Agility Prime program; powered-lift that are used for military purposes; and commonalities, differences, and handling qualities of various types of powered-lift. In addition to direct consultation, the FAA notes that because this final rule was designated significant under Executive Order 12866, it was coordinated with the DoD as well as other agencies during interagency coordination.\7\ This coordination serves as another opportunity for the FAA to consult with the DoD on this rule.
\7\ Section 3(f) of Executive Order 12866, issued on Sept. 30, 1993 (58 FR 51735).
III. Background
III. Background
A. General
Powered-lift are unique in their ability to take off and land vertically like helicopters and fly like an airplane during cruise flight. They can operate in different flight regimes utilizing features of helicopters or airplanes or both. The flight controls for such aircraft are also often unique to the individual aircraft design and can incorporate both traditional helicopter and airplane controls, or control systems that are dissimilar to either helicopters or airplanes. Likewise, the flight characteristics for powered-lift vary depending on the aircraft design and the different modes in which they operate.
A. General
Currently, the FAA has several powered-lift in the type certification process. The powered-lift coming to the civilian market have varied greatly in design, flight, and handling characteristics with varying degrees of automation.
While none of the powered-lift for which type certification is being sought have yet been approved for civilian use, the powered-lift industry has identified many potential uses for these aircraft. The FAA anticipates the introduction of aircraft that vary in size and passenger seating configuration and employ both new and traditional kinds of propulsion systems into the civilian market.
Manufacturers and initial operators of powered-lift indicate operations with powered-lift could offer many benefits over rotorcraft. For example, some powered-lift may be capable of transporting heavier loads at higher altitudes and faster cruise speeds than rotorcraft. Such capability may increase efficiency in transporting crew and material to remote locations such as offshore oil rigs and add diversity when considering landing points that are currently available to helicopters and not airplanes. Certificate holders seeking to take advantage of these capabilities may also seek to use powered-lift for transporting passengers from point-to-point; for example, such transportation could occur from a heliport and proceed at airplane airspeeds and ranges. Other opportunities may also exist in concentrated urban environments, where short point-to-point distances coupled with VTOL capability may allow for more efficient transportation of passengers than existing ground transportation methods.
B. Summary of the NPRM
B. Summary of the NPRM
In the NPRM, the FAA proposed permanent changes to the Code of Federal Regulations and a temporary SFAR to facilitate the safe integration of powered-lift operations into the NAS. Under this comprehensive approach, the FAA proposed to incorporate changes to pilot certification rules, operating rules, air agency rules, as well as other conforming proposals to maintenance requirements, pilot records database requirements, and FSTD qualification requirements. This section provides a broad summary of the NPRM.
Although the FAA did not propose any new type certification requirements or noise standards applicable to powered-lift, the FAA clarified that it would follow its existing aircraft certification process under § 21.17(b) to type certificate powered-lift. The FAA proposed a new process for an OEM to attain qualification of an FSTD in accordance with part 60. Because the existing deviation authority in part 60 cannot be used to qualify an FSTD that represents a category of aircraft for which there is no standard under part 60, the FAA proposed to mirror the aircraft certification process under § 21.17(b) to similarly allow an applicant seeking to qualify a powered-lift FSTD to use a combination of requirements in appendices A through D to part 60 to form a basis to qualify an FSTD under that part.
Part 61 sets forth the aeronautical experience requirements to attain a pilot certificate, as well as a flight instructor certificate, with powered-lift ratings. The FAA noted in the NPRM that the broader powered-lift category requirement, without an established class rating or type rating, would not adequately prepare a pilot to fly the specific powered-lift moving through FAA aircraft certification, thus potentially creating a safety gap. To address this concern, the FAA proposed to require pilots in command hold a type rating for the powered-lift they seek to fly. Most significantly, the FAA proposed alternate aeronautical experience and logging requirements from the existing powered-lift requirements in part 61. These alternate requirements would be applicable to certain pilot groups that the FAA deemed have the most relevant experience to establish a base of powered-lift pilots and instructors.
As proposed, the experience and logging provisions would create an alternative pathway to powered-lift certification for (1) OEM instructor pilots and test pilots; (2) initial cadres of flight instructors from certificate holders under parts 135, 141, and 142 receiving training at an OEM; and (3) pilots receiving training from the initial cadres of flight instructors under approved training programs under part 135, 141, or 142. Alternate aeronautical experience proposed by the FAA focused on giving allowances for flight training, including allowing the logging of PIC time when an applicant is the sole manipulator of the flight controls, and reduced distances to meet cross-country aeronautical experience. This experience, combined with meeting the alternate experience and logging provisions set forth in the FAA's proposed SFAR, would result in pilots attaining the required experience necessary to hold a commercial pilot certificate.
The FAA sought comment on existing requirements that dictate an aircraft used for flight instruction must have dual controls. The FAA outlined expectations regarding these rules as they are currently applicable to all aircraft (except manned free balloons) and, therefore, are applicable to powered-lift. The FAA also discussed how the dual control requirement would affect a pilot's ability to act as PIC when the PIC has no access to flight controls (i.e., supervised operating experience). The FAA acknowledged that manufacturers were in the midst of developing single flight control powered-lift and sought comment from the public on facilitating flight training and supervised operating experience in those aircraft.
In addition to the proposed revisions to part 61 and the temporary alternatives proposed in part 194, the FAA proposed changes to part 135, which does not currently stipulate which training requirements and experience requirements are applicable to powered-lift.\8\ Additionally, to further facilitate the certification of powered-lift pilots for the expected commercial operations, the NPRM proposed to allow part 135 operators to conduct training for their pilots seeking to obtain powered-lift category and type ratings for a commercial pilot certificate.\9\ The FAA also incorporated permanent and temporary amendments to pilot experience requirements, curriculum content, and part 135 instructor requirements to address the absence of powered-lift specific regulations in part 135. Finally, the NPRM proposed changes to parts 141 and 142 to facilitate the training of powered-lift pilots in accordance with those parts as well as the amendments set forth in the SFAR.
\8\ The FAA recently published a final rule amending the regulatory definitions of certain air carrier and commercial operations to enable powered-lift operations under part 135. See 88 FR 48072 (July 26, 2023).
\9\ After an initial cadre of instructors have completed training at the OEM, the FAA proposed that operators use their instructors to train and test additional pilots according to their approved part 135 training program.
The FAA proposed in the SFAR which operating rules apply to powered-lift on a temporary basis under parts 91 ("General Operating and Flight Rules"), 135 ("Operating Requirements: Commuter and On Demand Operations"), and 136 ("Commercial Air Tours"). The FAA noted that this would enable the FAA to gather additional information and determine the most appropriate permanent rulemaking path for these aircraft. The FAA proposed the requirements that should be applicable to powered-lift based on its phase of operation, current requirements for airplanes and helicopters, and safety intent of the current rule.
Under parts 91 and 135, generally the FAA proposed applying the operating rules pertaining to airplanes; however, in some instances, the FAA proposed applying certain helicopter rules based on whether a powered-lift is anticipated to operate similar to a helicopter and subject to some performance-based standards. The FAA proposed exceptions, however, to account for the different modes of flight and applicable operational requirements. Under part 91, the FAA proposed applying helicopter rules during some instances of vertical flight. Under part 135, the FAA proposed applying helicopter rules related to overwater equipment and briefing, specified IFR and VFR requirements, operations in icing conditions, airport requirements, and operations in remote areas.
The FAA proposed to permanently amend part 111 ("Pilot Records Database") to apply to operators and pilots of large powered-lift. Pilots of large powered-lift may go on to work for an air carrier in the future. Reporting these pilot records would be relevant to a future hiring air carrier.
The FAA determined that part 43 ("Maintenance, Preventive Maintenance, Rebuilding, and Alteration") was applicable to powered-lift but proposed other amendments to clarify preventative maintenance requirements considering that powered-lift can operate outside of the airport environment.
Part 97 ("Standard Instrument Procedures") outlines the current requirements for standard instrument approach procedures, obstacle departure procedures, and weather minimums for IFR takeoffs and landings at U.S. civil airports. Copter procedures are also outlined in this part. The FAA proposed that, as with airplanes and helicopters, powered-lift could also utilize these standard procedures during IFR operations if the powered-lift was capable in accordance with its type certification.
C. General Overview of Comments
C. General Overview of Comments
The FAA received 81 comments in response to the NPRM from a variety of commenters, including aircraft manufacturers and operators, aviation training companies, other aviation companies, trade associations, civil aviation authorities, and individuals. Powered-lift manufacturers and operators commenting on the NPRM included: AIR VEV; Archer Aviation (Archer); Augusta-Westland Philadelphia Corporation (AWPC), a subsidiary of Leonardo Helicopters ; BETA Technologies, Inc. (BETA); Bristow Group Inc. (Bristow); a joint comment from Eve Air Mobility and Embraer S.A. (Eve); Joby Aviation (Joby); Lilium GmbH (Lilium); Supernal LLC (Supernal); Vertical Aerospace Group LTD (Vertical Aerospace Group); Wisk Aero (Wisk); and XTI Aircraft Company (XTI). Other aviation companies commenting on the NPRM included: Airbus Helicopters, Alakai Technologies Corporation, ASR-Pioneer, CAE, Electra.aero, Ferrovial Vertiports, L3Harris Commercial Aviation Solutions--Advanced Air Mobility (L3Harris), Sabrewing Aircraft Company (SACO), and UPS Flight Forward (UPS FF).
Trade association commenters included: Advanced Air Mobility Institute, Air Line Pilots Association International (ALPA), Aircraft Owners and Pilots Association (AOPA), Airlines for America (A4A), Association for Uncrewed Vehicle Systems International (AUVSI), FlightSafety International Inc., General Aviation Manufacturers Association (GAMA), Helicopter Association International (HAI),\10\ National Air Transportation Association (NATA), National Business Aviation Association (NBAA), and Vertical Flight Society (VFS). SAE International, a consensus standards-setting organization, commented on the NPRM. Civil aviation authorities, governmental agencies, and industry associations located outside the United States commenting on the NPRM included: ADS Group (ADS); European Aerospace, Security and Defence Industries (ASD); the European Union Aviation Safety Agency (EASA); and the National Civil Aviation Agency of Brazil (ANAC).
\10\ The FAA notes that on February 26, 2024, the commenter announced the renaming of Helicopter Association International (HAI) to Vertical Aviation International (VAI).
While the FAA received only 81 comments, each comment detailed a wide array of discrete issues and recommendations. Some commenters provided general, high-level comments on the NPRM. Archer applauded the FAA's progress in its proposed powered-lift regulations, while Bristow said the proposed rules are a good start and will have a positive impact. An individual supported the proposed regulatory framework, which they said would enhance safety, efficiency, and innovation. Electra.aero stated the FAA should be proactive in powered-lift standards development to "help[] preclude unrealistic expectations of commercial market introduction of these technologies."
Overall, the majority of commenters expressed general support for the FAA's approach to integrating powered-lift into the NAS through expeditious rulemaking. However, they also recommended a number of revisions to the FAA's proposal that they believed would provide greater ability to quickly and safely integrate powered-lift into the NAS. The following provides a high-level overview of key issues raised by commenters. Detailed discussions of comments received and FAA responses are found throughout this preamble. Alignment With ICAO Requirements for Powered-Lift Airman Certification Category
The FAA received numerous comments on the proposal to retain the category requirement for powered-lift pilots. Commenters requested the FAA align its requirements with ICAO Annex 1 recommendations by requiring only a powered-lift type rating on an existing commercial pilot certificate with an airplane category or helicopter class rating (i.e., no powered-lift category rating). Aircraft Dual Controls Requirement
The FAA received many comments in response to the request for information on the existing requirement for dual controls to be installed on training aircraft and those used for supervised operating experience (SOE). Commenters requested: (1) no requirement for dual controls regardless of how the powered-lift will be used; (2) 100 percent simulator training, which would relieve any requirement for dual controls/aircraft training; and (3) non-traditional methods to accomplish SOE. However, EASA's comment supported a requirement for dual controls/access as currently required by Sec. § 61.195 and 91.109. Other Pilot Certification Comments of Note
Commenters broadly suggested aligning pilot certification requirements for powered-lift with those of helicopters. Amount of FSTD Time Allowed for a Powered-Lift Rating
Commenters requested the use of a flight training device (FTD) instead of an FFS and requested to utilize the FTD to perform all 50 hours of PIC flight time required for a powered-lift category rating at the commercial pilot level. Several commenters expressed the need for FSTDs that are not Level C or higher FFS, stating the need for more avenues by which an equivalent level of training may be accomplished. Commenters noted additional burdens of both time and resources to meet the proposed FSTD requirements. Other comments suggested using preexisting deviation authority mechanisms to achieve an equivalent level of safety. VFR and IFR Fuel Requirements
The FAA received comments on parts 91 and 135 VFR and IFR fuel requirements. Commenters requested different variations of two comment themes: (1) performance-based fuel reserves, and (2) use of fuel requirements specified for helicopters. Several commenters noted that powered-lift incorporating innovative power sources could offer greater operational capability if they were able to use energy reserves lower than those currently prescribed for airplanes or helicopters. They asserted that by enforcing the requirements proposed in the NPRM, the FAA would limit the capability and scope of operations. Other commenters suggested applying helicopter fuel requirements to powered-lift, asserting that powered-lift, like helicopters, have the maneuverability and operational flexibility to land in more varied locations. Visibility Requirements
The FAA received comments on visibility requirements. Commenters requested to utilize the helicopter provisions existing in the regulations, as well as the adoption of a performance-based approach. Several commenters suggested applying helicopter weather minima rather than the airplane requirements. Several commenters also noted that technological advancements could enable powered-lift to safely operate in visibilities lower than currently prescribed for airplanes or helicopters. Furthermore, several commenters contended that since powered-lift could operate at speeds and maneuverability comparable to helicopters, they should be permitted to use the visibility requirements prescribed for helicopters or a performance-based visibility requirement. Minimum Safe Altitudes for Operations Conducted Under Parts 91 and 135
The FAA received comments on parts 91 and 135 minimum safe altitudes. Commenters requested: (1) the use of VFR minimum altitudes specified for helicopters (one variation proposed), and (2) performance-based minimum safe altitudes. Commenters suggested the FAA consider the operational capabilities of powered-lift, which are able to operate at low speeds and have the maneuverability similar to helicopters, and therefore apply the VFR minimum altitudes prescribed for helicopters. Commenters also suggested the FAA permit a performance-based approach when applying VFR minimum altitude requirements to powered-lift. SFAR Duration (10 Years)
Commenters supported the temporary adaptability of the SFAR but stated that an approach with 2 to 3-year reviews within the 10-year period would ensure dynamic rather than static regulations.
D. Differences Between the NPRM and the Final Rule
D. Differences Between the NPRM and the Final Rule
The following table summarizes key changes from the NPRM made in this final rule.
Table 2--Summary of Key Changes From NPRM
Adopted by this Final Regulatory citation (14 Additional discussion
Proposed action in the NPRM Rule CFR) in section of preamble
The NPRM did not propose to revise This final rule adds Sec. 1.1 … XIV.D.
the definition of autorotation. powered-lift to the
definition of
autorotation.
The NPRM proposed to revise Sec. This final rule does Sec. 61.64(a)(1) … V.I.5.
61.64(a)(1) to specify the ratings not adopt the proposed
that must be sought when using an revision.
FSTD representing an aircraft requiring a type rating.
The NPRM proposed revising Sec. The final rule adopts Sec. 91.113(d)(2)-(4) VI.B.1.
91.113 as a temporary change under the proposed Sec.
part 194 and grouped powered-lift in 91.113 temporary
part 194 and grouped powered-lift in 91.113 temporary
the same right-of-way category with change as a permanent
airplanes and rotorcraft. change.
The NPRM proposed amending the note The regulation now Sec. 135.100(d) … VI.D.2.
in Sec. 135.100 to replace the clarifies the
word "airplane" with "aircraft". definition of taxi to
word "airplane" with "aircraft". definition of taxi to
include VTOL aircraft
and specifies the
airspeed and height
above ground level.
The NPRM did not address Sec. The final rule corrects Sec. 135.165(d) … VI.D.3.
135.165, which contains an incorrect the cross-reference in
cross-reference to part 119. Sec. 135.165(d) to
reference part 110
135.165, which contains an incorrect the cross-reference in
rather than part 119.
The NPRM did not propose revisions to This final rule revises Sec. 135.339(e)(3) V.J.11.
Sec. 135.339. certain training and (4).
regulations for check
airmen to account for
flight training in
powered-lift with a
single set of controls.
The NPRM did not propose revisions to This final rule revises Sec. 135.340(e)(3) V.G.1.iv. & V.J.11.
Sec. 135.340. certain training and (4).
regulations for
instructors to account
for flight training in
powered-lift with a
single set of controls.
The NPRM did not propose changing The final rule corrects Sec. 136.75(a) … VI.E.5.ii.
Sec. 136.75(a) to reference Sec. 136.75(a) by
"single-engine" rotorcraft. adding "single-
engine" before
"rotorcraft" as a
permanent change.
The NPRM did not propose revisions to This final rule Sec. 141.37(a)(3)(ii) V.F.2.ii., V.G.2., &
Sec. 141.37. corrects the ratings V.I.5.
that may be held on a
ground instructor
certificate.
The NPRM proposed to replace This final rule applies Sec. 142.47(a)(5).... V.F.2.ii.
"airplane" requiring a type rating the ATP aeronautical
"airplane" requiring a type rating the ATP aeronautical
with "aircraft" requiring a type experience
rating, thereby including all requirements to FSTD
powered-lift, in regard to certain instructors in
instructor qualifications under part airplanes and
142. helicopters requiring
a type rating, powered-
instructor qualifications under part airplanes and
lift over 12,500
pounds, and turbojet
powered powered-lift
rather than all
aircraft requiring a
type rating. The NPRM did not propose any changes This final rule adds a § 142.47(a)(5)(ii) V.G.3.
to the minimum aeronautical qualification option and (ii).
experience requirements in Sec. of holding a
142.47(a)(5). commercial pilot
certificate with the
appropriate ratings or
an unrestricted ATP
with the appropriate
ratings rather than
meeting certain
aeronautical
experience
requirements.
The NPRM did not include FAA test This final rule adds Sec. Sec. 194.103, V.F.2.i.d., V.F.2.ii.,
pilots or ASIs in the population of FAA test pilots and 194.203(a)(3), V.F.7., V.D.3.ii.,
pilots able to utilize the alternate ASIs to the alternate 194.213(a)(1)(iii), V.F.2.i.a.-d., V.F.7.,
requirements set forth by part 194. requirements for test 194.217, V.F.3.i.a.-c., &
pilots, accounts for 194.219(b)(1)(i), V.F.3.i.
both groups of pilots 194.219(b)(3)(iii),
as it pertains to 194.225,
instructor pilots, and 194.227(b)(1)(i).
adds definitions for
both groups of pilots.
The NPRM did not account for persons This final rule excepts Sec. 194.209(c) … V.C.
receiving flight training in powered- applicants receiving lift type certificated for more than flight training from
one pilot. Sec. 61.55(a)(1),
(a)(2), and (b)(2) in
order to serve as
Second in Command
receiving flight training in powered- applicants receiving lift type certificated for more than flight training from
(SIC) in a powered-
lift type certificated
for more than one
required pilot flight
crewmember.
The NPRM did not propose any relief This final rule reduces Sec. 194.216(a) … V.F.2., V.F.2.iii.a., &
to Sec. 61.129(e)(2)(i), which the amount of required V.G.3.
requires 50 hours of PIC time in a PIC time in a powered-
powered-lift. lift to 35 hours for
pilots under the SFAR.
The NPRM proposed to only permit This final rule permits Sec. 194.216(b) … V.F.2. & V.F.2.iii.b.
pilots at approved training programs any applicant under
pilots at approved training programs any applicant under
to credit a maximum of 15 hours in the SFAR to credit a
an FSTD toward the PIC flight time maximum of 15 hours
requirement of Sec. towards the 35-hour
61.129(e)(2)(i). PIC flight time
requirement of Sec.
194.216(a).
The NPRM proposed to permit certain This final rule reduces Sec. Sec. V.F.2.ii.b.
pilots to log up to 40 hours of PIC the number of hours 194.221(c), 194.223(c).
flight time as sole manipulator of that may be logged
the controls when the person is not from 40 hours to 25
rated. hours to account for
the reduction in
required PIC flight
time in a powered-lift
(see Sec.
194.216(a)).
The NPRM proposed to mirror a part This final rule Sec. 194.241(b) … V.I.5.
141 section prescribing certain corrects the ratings
ratings that may be held on a ground that may be held on a
ratings that may be held on a ground that may be held on a
instructor certificate. ground instructor
certificate, mirroring
the correction to Sec.
141.37(a)(3)(ii).
The NPRM did not contemplate This final rule adopts Sec. 194.243(b)(4)... V.G.1.v.
retraining requirements for training and
unsatisfactory performance on part endorsement
135 checks in lieu of a practical requirements mirroring
test. Sec. 61.49 for
certain unsatisfactory
part 135 checks under
the SFAR.
The NPRM referenced the Aircraft This final rule Sec. 194.247(b) … V.J.3.
Flight Manual as determining when corrects the reference
two pilots are required. to the type
certificate as
dictating when two
pilots are required.
The NPRM proposed to require a This final rule Sec. 194.247(b)(1)... V.J.3.
certificate holder conducting specifies Sec. Sec.
commuter operations with powered- 121.903(c) and
lift in which two pilots are 121.921(a) in subpart
required to comply with subpart Y to Y will apply to
required to comply with subpart Y to Y will apply to
part 121. powered-lift,
notwithstanding use of
the term "airplane"
in the regulations.
The NPRM did not propose any relief This final rule adopts Sec. 194.253, V.D.3.ii. & V.D.3.iii.
to the requirement that a powered- three options for Appendix A to part 194.
lift must have dual controls for flight training in
flight training. powered-lift with a
single set of controls.
The NPRM proposed not allowing The final rule allows • Sec. VI.B.1., VI.B.2.,
powered-lift to use the helicopter/ some powered-lift to 194.302(d) (pertaining VI.B.4., & VI.B.5.
rotorcraft criteria stipulated in use the helicopter/ to Sec. 91.119).
the following part 91 sections: Sec. rotorcraft provisions
the following part 91 sections: Sec. rotorcraft provisions
91.119 (minimum safe altitudes), as long as they meet
Sec. 91.151 (VFR fuel the performance-based
requirements), Sec. Sec. 91.155 criteria outlined in
and 91.157 (VFR weather minimums), part 194.
§ 91.167 (IFR fuel requirements), § 91.169 (IFR flight plan), and § 91.175 (IFR takeoff and landing).
• Sec. …
194.302(l) (pertaining
to § 91.151).
• Sec. …
194.302(m) and (n)
(pertaining to Sec.
91.155).
• Sec. …
194.302(p) (pertaining
to § 91.157).
• Sec. …
194.302(q) (pertaining
to § 91.167).
• Sec. …
194.302(r) (pertaining
to § 91.169).
• Sec. …
194.302(s) (pertaining
to § 91.175).
The NPRM proposed not allowing The final rule allows • Sec. VI.D.2., VI.D.4., &
powered-lift to use the helicopter/ some powered-lift to 194.306(c) (pertaining VI.D.8.
rotorcraft criteria stipulated in use the helicopter/ to Sec. 135.93).
the following part 135 sections: rotorcraft provisions
Sec. 135.93 (Autopilot minimum as long as they meet
altitudes), 135.203 (VFR minimum the performance-based
altitudes), 135.205 (VFR visibility criteria outlined in
requirements), 135.209 (VFR fuel part 194.
supply), 135.221 (IFR alternate airport weather minimums), 135.223 (IFR alternate airport requirements), 135.609 (VFR visibility requirements for Class G airspace), 135.613 (approach/ departure IFR transitions), and 135.615 (VFR flight planning).
• Sec. …
194.306(nn)
(pertaining to Sec.
135.203).
• Sec. …
194.306(pp)
(pertaining to
135.205).
…
• Sec.
194.306(ss)
(pertaining to Sec.
135.209).
• Sec. …
194.306(tt)
(pertaining to Sec.
135.221).
• Sec. …
194.306(uu)
(pertaining to Sec.
135.223).
• Sec. …
194.306(qqq)
(pertaining to Sec.
135.609).
• Sec. …
194.306(sss) and (ttt)
(pertaining to Sec.
135.613).
• Sec. …
194.306(uuu)
(pertaining to Sec.
135.615).
The NPRM proposed applying the The final rule applies Sec. 194.306(t) … VI.D.3.
requirements of Sec. 135.158 Sec. 135.158 to
(pitot heat indication systems) to powered-lift but
powered-lift. allows the indication
light to be other than
an amber light.
The NPRM did not address powered-lift The final rule revises • Sec. VI.D.3., VI.E.2.,
that experience a "critical change some language in part 194.306(z) (pertaining VI.E.3., & VI.E.5.i.
of thrust." 194, pertaining to to Sec. 135.168).
reference powered-lift
that experience a
"critical change of
thrust" and adopts a
definition for this
term.
• Sec.
194.306(ii) and (jj)
(pertaining to Sec.
135.181).
• Sec. …
194.306(kk)
(pertaining to Sec.
135.183).
• Sec. …
194.308(d)(1)
(pertaining to Sec.
136.9).
• Sec. …
194.308(d)(2)(ii)
(pertaining to Sec.
136.11(a)(2)).
• Sec. …
194.308(d)(6)
(pertaining to Sec.
136.75(c)).
The NPRM did not clarify the The final rule outlines Sec. 194.306(nnn) VI.D.8.
instrument and ATP certificate the instrument and ATP (pertaining to Sec.
requirements under Sec. 135.603. certificate 135.603).
requirements for
powered-lift
conducting air
ambulance operations.
The NPRM did not apply the flotation The final rule applies Sec. 194.308(d)(2) VI.E.3.
requirements under Sec. 136.11 to Sec. 136.11(a)(1) to (pertaining to Sec.
single-engine powered-lift and single-engine powered- 136.11).
applied the requirements only to lift. It also applies
powered-lift operating in vertical- Sec. 136.11 to
lift flight mode while conducting powered-lift operating
operations beyond the auto- in both vertical-lift
rotational or gliding distance from and wing-borne flight
the shoreline. modes. Finally, the
final rule removes the
redundant and
unnecessary language
pertaining to auto-
rotational and gliding
distances.
IV. Powered-Lift Type Certification and FSTD Qualification
IV. Powered-Lift Type Certification and FSTD Qualification
A. Type Certification
In the NPRM, the FAA did not propose any new requirements for the type certification of powered-lift. The FAA determined it will use its existing regulatory process to type certificate powered-lift as a special class under § 21.17(b).
A. Type Certification
The FAA uses a tiered safety approach for minimum certification standards, with different levels for airplanes and rotorcraft. For certain unique aircraft for which the FAA has not established airworthiness standards in its regulations (e.g., gliders, airships, powered-lift), the FAA uses the special class aircraft process. For powered-lift, the FAA will designate airworthiness requirements and other criteria that match the safety levels of existing standards by considering factors like aircraft size, seating, and performance. The FAA will publish the proposed airworthiness criteria, along with an explanation of its equivalency determination, in the Federal Register for public notice and comment for each powered-lift project.\11\
\11\ E.g., see: Airworthiness Criteria: Special Class Airworthiness Criteria for the Joby Aero, Inc. Model JAS4-1 Powered-Lift, 87 FR 67399 (Nov. 8, 2022); 89 FR 17230 (March 8, 2024). Alternatively, the FAA may designate acceptable airworthiness criteria as the certification basis for powered-lift by publishing a future advisory circular (AC), as the agency has done for airships (AC 21.17-1A, Type Certification--Airships, dated Sept. 25, 1992), gliders (AC 21.17-2A, Type Certification--Fixed Wing Gliders (Sailplanes), Including Powered Gliders, dated Feb. 10. 1993), and very light airplanes (AC 21.17-3, Type Certification of Very Light Airplanes Under FAR 21.17(b), dated Dec. 21, 1992).
In some cases, specific airworthiness requirements for issuance of type certificates might not fulfill the requirements of operational rules. Applicants seeking powered-lift type design approval should identify areas needing additional approvals to meet anticipated operational needs. Operational rules often reference airworthiness standards in part 23, 25, 27, or 29, but adaptations might be necessary for unique designs.
In the NPRM, the FAA proposed that powered-lift weighing more than 12,500 pounds would be required to meet certain operating regulations that currently apply to large transport category airplanes. The FAA also stated that this specific weight point would be an appropriate weight at which to apply certain transport category certification standards when type certificating powered-lift under § 21.17(b). The FAA further requested comments on whether the public believes there is a more appropriate weight at which to apply transport category regulations to powered-lift.
Two commenters generally supported the FAA's proposed approach for type certification. HAI commented that older powered-lift designs are significantly different from those proposed by recent applicants and supported the FAA's intended use of § 21.17(b) for the type certification of unique and novel designs. The commenter also recommended collecting information during the certification process of novel AAM aircraft before requiring type ratings for each make and model. SAE International generally supported the FAA's intended use of performance-based regulations for powered-lift type certification airworthiness criteria.
An individual commenter highlighted specific concerns regarding powered-lift type certification and recommended that the FAA consider the unique aspects of each design when developing the type certification requirements. The commenter highlighted the need to consider all the various flight-mode unique aspects and that the regulations should focus on control law development instead of prescribing specific regulations based on specific design configurations. The commenter also identified technical areas that the FAA should consider when developing powered-lift airworthiness criteria. The FAA agrees that the novel aspects of powered-lift require an alternate approach to existing prescriptive airworthiness standards for airplanes and rotorcraft, which is why the FAA expects to largely employ performance-based airworthiness criteria. The FAA also agrees that the novel features identified by the commenter require evaluation during powered-lift type certification; however, this is beyond the scope of this SFAR and will instead be covered in each powered-lift airworthiness criteria publication.
An individual commenter requested clarification as to how the FAA would determine which airworthiness standards would be appropriate for use in the type certification of powered-lift and what criteria would be used to make this decision.
As described in the NPRM, when conducting the evaluation for determining an equivalent level of safety to existing standards, the FAA will consider the powered-lift's specific type design features (aircraft's size, passenger seating configuration, performance, etc.) and evaluate them against the applicable airworthiness requirements contained in parts 23, 25, 27, 29, 33, and 35. In addition, certain transport category (i.e., 14 CFR parts 25 and 29) certification standards will be appropriate for powered-lift weighing more than 12,500 pounds.
EASA noted discrepancies in the type certification section of the NPRM. EASA stated that while the NPRM stated that no changes to type certification requirements were proposed, the FAA has separately published airworthiness criteria for two companies that propose changes to part 23 requirements and establish new requirements.
To clarify the FAA's statement in the NPRM regarding no new/changed type certification requirements, the FAA noted that the existing regulatory structure in 14 CFR part 21 already provides the means by which powered-lift can receive a type certificate. Specifically, § 21.17(b) provides for the ability to type certificate powered-lift as a special class aircraft. As stated in the NPRM, under § 21.17(b), the FAA designates the applicable airworthiness requirements, which may include requirements from the existing airworthiness standards applicable to normal category and transport category airplanes, normal category and transport category rotorcraft, aircraft engines and propellers (parts 23, 25, 27, 29, 33, and 35), and it may also include unique airworthiness criteria developed specifically for the individual product.
Alakai Technologies Corporation stated the proposed entrants into the AAM industry include "special class rotorcraft" \12\ and powered-lift, both of which would be type certificated under § 21.17(b). However, the commenter noted the proposed rule provides a framework for airman certification and operation only for powered-lift, and not for special class rotorcraft. The commenter contended that without providing a framework for airman certification and operation for special class rotorcraft, special class rotorcraft will be prohibited from operating in the NAS, thereby limiting the market to powered-lift special class aircraft AAM technology.
\12\ "Special class rotorcraft" are rotorcraft, as defined in § 1.1, that meet three or more of the following criteria: (1) for its support in flight, the rotorcraft depends principally on the lift generated by three or more rotors and creates directional control by varying the power at each rotor; (2) the rotorcraft utilizes electric or hybrid-electric propulsion; (3) the rotorcraft's design includes an advanced flight control system (e.g., a fly-by-wire flight control system) that uses electronically operated controls such that the pilot has no direct mechanical link to the control surfaces or swashplate; and (4) the rotorcraft is not capable of traditional autorotation, but instead provides an alternate method of safe landing following loss of engine power. See definition of rotorcraft in 1.1 and FAA Policy Statement PS-AIR 21.17-02.
The commenter referred to a developing policy the FAA has not yet finalized that would designate certain rotorcraft as "special class rotorcraft." Although special class rotorcraft would be type certificated under the special class process in § 21.17(b), they still meet the regulatory definition of a rotorcraft in § 1.1. As such, special class rotorcraft would fall under the operating and airmen rules for rotorcraft (helicopter) in parts 61, 91, 135, etc. and would not need the same accommodations that were necessary for powered-lift. The FAA determined that the inclusion of special class rotorcraft in this SFAR was not needed for enabling those aircraft and that including special class rotorcraft is beyond the scope of this rulemaking to enable powered-lift.
EASA asked how the FAA would consider operational alleviations for these type-certificated aircraft in the context of AAM. The FAA reviewed the SFAR language to determine where operational alleviations could be provided for powered-lift that meet certain performance criteria and made changes to the minimum safe altitude, visibility, and fuel reserves requirements. These accommodations are addressed within the respective sections of this preamble for each rule as applicable for powered-lift.
Vertical Aerospace Group commented that powered-lift should be built to the highest safety standards and that the combination of complex aircraft systems and complex commercial operating environment require a design safety target of 10-9 and Design Assurance Level (DAL) A for systems, software, and complex hardware, with respect to failure conditions classified as catastrophic. Additionally, the commenter requested the FAA provide details on what transport category airworthiness criteria would be used for powered-lift, including crashworthiness, gust loads, wind speeds, and performance criteria.
Currently, airplanes and rotorcraft type certificated in the normal category are permitted to perform commercial operations transporting passengers without meeting the more stringent transport category design requirements. As stated in the NPRM, for powered-lift, which are type certificated under § 21.17(b), the safety targets for each product are based on meeting an equivalent level of safety to the existing airworthiness standards. Rather than establishing a rigid "one size fits all" safety target or DAL for all powered-lift, which will be used in varied types of operations, the FAA separately considers each aircraft's unique design characteristics to ensure the selected airworthiness criteria are appropriate to the design, intended operations, and safety. The FAA will publish the proposed airworthiness criteria for each powered-lift, including an explanation of its equivalency determination, in the Federal Register for public notice and comment before issuing final airworthiness criteria.
ALPA responded to the FAA's request for comments on applying transport category regulations to large powered-lift, those weighing more than 12,500 pounds. ALPA disagreed with the FAA's proposal to use 12,500 pounds as the weight threshold for large powered-lift because ALPA asserted this cutoff is arbitrarily based on historical aircraft safety records that are not relevant to new aircraft being proposed in the powered-lift industry. ALPA recommended that 7,500 pounds would be more appropriate for first-generation powered-lift, noting that this would allow the FAA to apply more appropriate sections of existing parts 135 and 136 to the majority of the first-generation powered-lift.
The FAA disagrees with the ALPA recommendation that 7,500 pounds should be used instead of 12,500 pounds as the weight at which transport category airworthiness standards would be appropriate. The FAA has determined that 12,500 pounds provides the appropriate level of safety and places the weight threshold between the weight limits for transport category airplanes and transport category rotorcraft.\13\ Imposing part 25/29 airworthiness requirements on powered-lift weighing 12,500 pounds or less would decrease the useful payload of the powered-lift and increase the cost of type certification.
\13\ The NPRM included a typographical error that identified the normal category weight limits for rotorcraft and airplanes as 7,500 lbs. and 19,500 lbs., respectively. The correct weight limits for those airworthiness standards are 7,000 lbs. and 19,000 lbs., respectively.
XTI said that, in addition to wing-borne flight and vertical lift, some powered-lift will also operate in an intermediate configuration utilizing vectored thrust and wing-borne flight during takeoff and landing. This short takeoff and landing (STOL) mode, the commenter said, provides significant performance benefits and improves ranges. XTI requested clarification whether required runway distances would be calculated differently for powered-lift operating in STOL mode than the required distances for fully wing-borne flight.
The method by which the required runway distance is calculated would be the same for powered-lift and conventional takeoff and landing aircraft; however, the distance for powered-lift would be shorter. The specific configuration for takeoff and landing would need to be defined in the flight manual along with the respective takeoff and landing performance for those configurations. However, the particular details in calculating runway distances for a certain powered-lift are beyond the scope of this SFAR.
A helicopter pilot recommended that the FAA review its bird strike certification procedures when certificating powered-lift. The commenter cited concerns that powered-lift will be more prone to bird strikes than helicopters given they operate at lower altitudes and environments prone to more bird activity, generate less noise and rotor downwash that would normally keep birds away, and may travel at faster speeds. The commenter suggested powered-lift test pilots should use their experience to recommend methods of bird strike avoidance through training, emergency procedures, and system designs like detect-and-avoid systems.
The commenter's recommendations are beyond the scope of this SFAR. However, the agency notes that, to date, the FAA has included bird strike protection requirements in the proposed airworthiness criteria for the first three powered-lift applicants the agency has published for notice and comment under § 21.17(b).\14\
\14\ See Airworthiness Criteria: Special Class Airworthiness Criteria for the Joby Aero, Inc. Model JAS4-1 Powered-Lift, 87 FR 67399 (Nov. 8, 2022); Airworthiness Criteria: Special Class Airworthiness Criteria for the Archer Aviation Inc. Model M001 Powered-Lift, 87 FR 77749 (Dec. 20, 2022); Airworthiness Criteria: Special Class Airworthiness Criteria for the AgustaWestland Philadelphia Corporation Model AW609 Powered-Lift, 88 FR 37805 (June 9, 2023).
The remaining comments on type certification requested clarification on language used in the NPRM preamble or specific information on the type certification process or specific safety objectives required during type certification. These comments are beyond the scope of this rulemaking. As stated previously, the specific airworthiness criteria for each powered-lift project will be published in the Federal Register for public notice and comment.
B. Noise Certification
B. Noise Certification
The FAA did not propose any new requirements for the noise certification of powered-lift. The FAA is mandated to establish noise standards and regulations that ensure public safety regarding aircraft noise. Recent advancements in electric motors and control systems have led manufacturers to develop novel aircraft that differ significantly from conventional ones covered by existing noise certification standards. The FAA will examine each application and determine whether the existing part 36 requirements are appropriate as a noise certification basis, as it does for all noise certification applicants. If the FAA determines that the part 36 rules are not sufficient for a particular powered-lift, the FAA may create rules of particular applicability for that powered-lift. Due to potentially diverse designs of these aircraft and limited data on their noise signatures, the FAA has not yet established broad noise standards for all powered-lift. However, powered-lift that are tilt-rotors are currently subject to the noise regulations of appendix K of part 36.
If a manufacturer seeks certification for a powered-lift which could not be certificated using appendix K of part 36, the FAA would propose amending the SFAR to include operating noise limits in subpart I of part 91, which would be applicable to that powered-lift.\15\
\15\ Appendix K to part 36 outlines noise requirements for tiltrotors utilized by a powered-lift. The FAA notes that these would be applicable to powered-lift if it is determined during the aircraft certification process.
HAI said that the certification process could reveal that AAM vehicles emit less noise than traditional aircraft, referencing the GAO report cited in the NPRM.\16\ HAI said that current standards may need adjustment but that the certification process should reveal any requirements and inform future rulemaking in this area. The FAA contemplated the need for future rulemaking in the NPRM. Rather than use the existing requirements for small propeller airplanes, jet transport airplanes, helicopters, or tiltrotors in part 36, such diverse conceptual designs and new aircraft types may require tailored noise certification requirements. As stated in the NPRM, the FAA will examine each application and determine whether existing part 36 requirements are appropriate as a noise certification basis, as it does for all noise certification applicants. If the current regulations cannot be applied appropriately, the FAA may promulgate a rule of particular applicability to establish a noise certification basis for these new aircraft designs. The noise sources from these aircraft have been shown to be complex, and the FAA does not yet have sufficient data on the aircraft types and noise signatures expected from these new entrants. Accordingly, until sufficient data are collected, the FAA would not be able to promulgate standards of general applicability for these aircraft.
\16\ U.S. Government Accountability Office, GAO-22-105020, Transforming Aviation: Stakeholders Identified Issues to Address for "Advanced Air Mobility", published, May 9, 2022. Publicly released, May 9, 2022.
C. Qualification of Powered-Lift Flight Simulation Training Devices (FSTDs)
Continue reading ↓ 120 of 1793 passages shown