69 FR 19313 Boeing Model 737-600, -700, -700C, -800, and -900 Series Airplanes
This document corrects an error that appeared in airworthiness directive (AD) 2004-05-19 that was published in the Federal Register on March 9, 2004 (69 FR 10921). The error resulted in the omission of the phrase "whichever occurs first" in a certain grace period for the initial compliance time. This AD is applicable to all Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires an inspection of the rear spar attach pins and front spar attach bolts that attach the horizontal stabilizers to the horizontal stabilizer center section for damage; and follow-on or corrective actions, as applicable.
[Docket No. 2004-NM-03-AD; Amendment 39-13514; AD 2004-05-19] RIN 2120-AA64
Airworthiness Directives; Boeing Model 737-600, -700, -700C, - 800, and -900 Series Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
SUMMARY: This document corrects an error that appeared in airworthiness directive (AD) 2004-05-19 that was published in the Federal Register on March 9, 2004 (69 FR 10921). The error resulted in the omission of the phrase "whichever occurs first" in a certain grace period for the initial compliance time. This AD is applicable to all Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires an inspection of the rear spar attach pins and front spar attach bolts that attach the horizontal stabilizers to the horizontal stabilizer center section for damage; and follow-on or corrective actions, as applicable.
Dates
DATES: Effective March 24, 2004.
FOR FURTHER INFORMATION CONTACT: Nancy Marsh, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 917-6440; fax (425) 917-6590.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2004-05-19, amendment 39-13514, applicable to all Boeing Model 737-600, -700, - 700C, -800, and -900 series airplanes, was published in the Federal Register on March 9, 2004 (69 FR 10921). That AD requires an inspection of the rear spar attach pins and front spar attach bolts that attach the horizontal stabilizers to the horizontal stabilizer center section for damage; and follow-on or corrective actions, as applicable.
Supplementary Information
As published, in the second row of the "Grace Period" column of Table 1 of AD 2004-05-19, the phrase "whichever occurs first" was inadvertently omitted. The correct grace period should have read, "For airplanes on which Boeing Service Bulletin 737-55-1074, dated August 15, 2002, has been done as of the effective date of this AD: Within 24 months or 6,000 flight cycles since accomplishment of the service bulletin, whichever occurs first."
Since no other part of the regulatory information has been changed, the final rule is not being republished in the Federal Register.
The effective date of this AD remains March 24, 2004.
§ 39.13 [Corrected]
§ 39.13 [Corrected]
On page 10922, in the third column, and on page 10933, in the first column, Table 1 of paragraph (a) of AD 2004-05-19 is corrected to read as follows: * * * * *
(a) * * *
Table 1.--Initial Compliance Time
Threshold Grace period
Prior to the accumulation of 15,000 total For airplanes on which flight cycles or 60 months since the date Boeing Service Bulletin 737-of issuance of the original Airworthiness 55-1074, dated August 15,
Certificate or the date of issuance of 2002, has not been done as
the Export Certificate of Airworthiness, of the effective date of
whichever occurs first. this AD: Within 90 days
after the effective date of
this AD.
For airplanes on which
Boeing Service Bulletin 737-
55-1074, dated August 15,
2002, has been done as of
the effective date of this
AD: Within 24 months or
6,000 flight cycles since
accomplishment of the
service bulletin, whichever
occurs first.
* * * * *
Issued in Renton, Washington, on April 6, 2004. Kevin M. Mullin, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.