FAA-H-8083-11B Ch. 4 Weather Theory & Reports
Introduction
18990 Weather is the state of the atmosphere at a given time and place, with respect to temperature, moisture content, stability, visibility, and cloudiness. These factors interact to form the following five major meteorological elements:
18991 • Atmospheric pressure (high or low).
18992 • Wind (calm or storm).
18993 • Clouds (clearness or cloudiness).
18994 • Precipitation (rain, sleet, snow).
18995 A solid understanding of weather theory provides the tools necessary to understand the reports and forecasts obtained from a Flight Service Station (FSS) weather specialist and other aviation weather services. No other means of aviation relies more heavily on knowledge and understanding of weather for its safety than ballooning. It is important to note, however, that there is no substitute for experience.
18996 There are many excellent texts and online sources available for learning more about weather that are referenced at the appropriate point in this chapter. Much of the following information can be found in the Aviation Weather Handbook FAA-H-8083-28, which may be found on the FAA’s website.
18998 Other online sources for weather information are also helpful. The National Oceanic and Atmospheric Administration (NOAA) offers a weather tutorial. Developed to meet the needs of educators, weather professionals, and others interested in learning more about weather, it provides a number of concise explanations of weather theory. Additionally, there is a site developed as part of the Weather World 2010 project by the Department of Atmospheric Sciences at the University of Illinois at Urbana-Champaign.
19001 This chapter is designed to give balloon pilots a basic knowledge of weather principles, acquaint them with the weather information available for flight planning, and help them develop sound decision-making skills as they prepare for and execute a safe flight.
The Atmosphere
19002 The atmosphere is the envelope of air that surrounds the Earth. Approximately one-half of the air, by weight, is within the lower 18,000 feet. The remainder of the air is spread over a vertical distance in excess of 1,000 miles. No definite outer atmospheric boundary exists, but the air particles become less numerous with increasing altitude until they gradually overcome Earth’s gravity and escape into space. In addition to the rotation of the air with the rotation of the Earth, another type of air movement occurs within the atmosphere. This movement of air around the surface of the Earth is called atmospheric circulation.
Composition
19003 The atmosphere is a blanket of air composed of a mixture of gases that surrounds the Earth and reaches over 560 kilometers (km), 348 miles, from the surface. This blanket of gases provides protection from ultraviolet rays, as well as supporting human, animal, and plant life. Nitrogen accounts for 78 percent of the gases comprising the atmosphere, while oxygen makes up 21 percent. [Figure 4-1] Argon, carbon dioxide, and traces of other gases make up the remaining 1 percent. Within this envelope of gases, there are several recognizable layers of the atmosphere as defined by altitude.
Figure 4-1 · page 2Picture of the page from the copy saved here
Chapter 4: Weather Theory & Reports
Chapter 4: Weather Theory & Reports
10191
1%
21%
78%
Trace gases Oxygen Nitrogen
Figure 4-1. Composition of the atmosphere.
19005 The first layer, closest layer to the surface, known as the troposphere, extends from sea level up to 20,000 feet (8 km) over the northern and southern poles and up to 48,000 feet (14.5 km) over the equatorial regions. The vast majority of weather, clouds, storms, and temperature variances occur within this first layer of the atmosphere.
The Standard Atmosphere
19006 To provide a common reference when discussing weather, the International Standard Atmosphere (ISA) has been established. To arrive at the standard atmosphere, conditions throughout the atmosphere with respect to latitudes, seasons, and altitudes were averaged. The standard reference point is 59 °F or 15 °C, and 29.92 inches of mercury ("Hg) or 1013.2 millibars (mb). Pressure does not decrease linearly with altitude, but for the first 10,000 feet, 1 "Hg for each 1,000 feet approximates the rate of pressure change. There is also a standard temperature lapse rate of 3.5 °F or 2 °C per 1,000 feet of altitude, up to 36,000 feet.
19007 At sea level, the atmosphere exerts pressure on the Earth at a force of 14.7 pounds per square inch (psi). This means a column of air one inch square, extending from the surface up to the upper atmospheric limit, weighs about 14.7 pounds.
19008 A person standing at sea level also experiences the pressure of the atmosphere, but the pressure is a force of pressure over the entire surface of the skin. The actual pressure at a given place and time will differ with altitude, temperature, and density of the air. These conditions also affect balloon performance, especially with regard to useful load and burner performance.
Measurement of Atmospheric Pressure
19009 Measurement of Atmospheric Pressure Constant pressure charts and hurricane pressure reports are written using millibars (mb). Since weather stations are located around the globe, all local barometric pressure readings are converted to a sea level pressure to provide a standard for records and reports. To achieve this, each station converts its barometric pressure by adding approximately 1 "Hg for every 1,000 feet of elevation gain. For example, a station at 5,000 feet above sea level, with a reading of 24.92 "Hg, reports a sea level pressure reading of 29.92 "Hg. Using common sea level pressure readings helps ensure aircraft altimeters are set correctly, based on the current pressure readings. In order to compensate for pressure variations due to different station elevations, all observations are mathematically corrected to mean sea level (MSL). Altimeter settings are obtained by mathematically reducing station pressure to MSL. This enables the pilot to read MSL altitudes on the altimeter.
19010 When charting atmospheric pressures over various areas of the Earth, the meteorologist is primarily interested in the pressure difference per unit of horizontal distance—the pressure gradient.
19011 The MSL pressure is plotted in mb at each reporting station on a surface weather map. The isobars outline pressure areas in somewhat the same manner that contour lines outline terrain features on contour maps. The standard procedure on
surface weather maps in North America is to draw isobars at four mb intervals, with intermediate, two mb spacing when appropriate. Although the isobar patterns are never the same on any two weather maps, they do show patterns of similarity.
10038 By tracking barometric pressure trends across a large area, weather forecasters can more accurately predict movement of pressure systems and the associated weather. For example, tracking a pattern of rising pressure at a single weather station generally indicates the approach of fair weather. Conversely, decreasing or rapidly falling pressure usually indicates approaching bad weather and possible severe storms.
Temperature
19013 Temperature is a measurement of the amount of heat and expresses a degree of molecular activity. Since different substances have different molecular structures, equal amounts of heat applied to equal volumes of two different substances will result in unequal heating. Every substance has its own unique specific heat. For example, a land surface becomes hotter than a water surface when equal amounts of heat are added to each. The degree of “hotness” or “coldness” of a substance is known as its temperature, and is measured with a thermometer.
19014 The Earth’s surface is heated during the day by the sun. This incoming solar radiation is called insolation, while heat radiated from the Earth by outgoing radiation is called terrestrial radiation. The cooling that occurs at night is terrestrial radiation.
Temperature Scales
19015 Two temperature scales are important to the balloon pilot: Fahrenheit (F) and Celsius (C). On the Fahrenheit scale, the freezing point is 32° and the boiling point is 212°, a difference of 180°. On the Celsius scale, the freezing point is 0° and the boiling point is 100°. For many years, the Celsius scale was the choice for technicians and those countries and organizations utilizing the metric system. In recent years, the United States has transitioned to almost exclusive use of the Celsius scale in weather reports, primarily because of the International Civil Aviation Organization (ICAO) convention agreements. [Figure 4-2]
19016
Water boils
Water freezes
Dry ice (solid CO2)
Liquid air
Absolute zero
Fahrenheit Celsius
212 °F
98.6 °F
32 °F
–40 °F
–108 °F
–312 °F
–459 °F
100 °C
50 °C
0 °C
–40 °C
–78 °C
Figure 4-2 · page 3Picture of the page from the copy saved here
–200 °C
–273 °C
Figure 4-2. Comparison of Fahrenheit and Celsius temperature scales.
19017 A quick and easy way to convert Fahrenheit to Celsius is to subtract 30, and divide the number by two. To convert Celsius to Fahrenheit, double the number, and add 30. These formulas give a good approximation for most calculations in ballooning. Conversion charts are also available on the Internet.
Temperature Variations
19018 The amount of solar radiation (insolation) received by any region varies with the time of day, with seasons, and with latitude. These differences in insolation and changes in temperature of various air masses create temperature variations. Temperatures also vary with differences in topographical surface and with altitude. These temperature variations create forces that drive the atmosphere in its motion. Simply stated, heat and, therefore, temperature differences cause weather.
19019 Diurnal variation is the change in temperature from day to night brought about by the daily rotation of the Earth. The Earth receives heat during the day by insolation, but continually loses heat by terrestrial radiation. Warming and cooling depend on an imbalance of insolation and terrestrial radiation. During the day, insolation exceeds terrestrial radiation and the surface becomes warmer. At night, insolation ceases, but terrestrial radiation continues and cools the surface. Cooling continues after sunrise until insolation again exceeds terrestrial radiation. Minimum temperature usually occurs after sunrise, sometimes as much as one hour after. The continued cooling after sunrise is one reason that fog sometimes forms shortly after the sun is above the horizon.
Temperature Variations with Topography
19020 Temperature variations are also induced by water and terrain. Water absorbs and radiates heat energy with less temperature change than does land. Large, deep water bodies tend to minimize temperature changes, while large land masses induce major temperature changes. Wet soil, such as that found in swamps and marshes, is almost as effective as water in suppressing temperature changes. Thick vegetation tends to control temperature changes since it contains some water and also insulates against heat transfer between the ground and the atmosphere. Arid, barren surfaces generate the greatest temperature changes.
19021 These topographical influences are both diurnal and seasonal. For example, the difference between a daily maximum and minimum may be 10° or less over water, near a shore line, or over a swamp or marsh, while a difference of 50° or more is common over rocky or sandy deserts.
19022 Abrupt temperature differences develop along lake and ocean shores. These variations generate pressure differences and local air flows or winds, which may become a consideration in the balloon pilot’s study of the air mass
19023 Prevailing wind is also a factor in temperature control. In an area where prevailing winds are from large water bodies, temperature changes are rather small. Most islands enjoy fairly constant temperatures. On the other hand, temperature changes are more pronounced where prevailing wind is from dry, barren regions.
Temperature Variation with Altitude
19024 Temperature normally decreases with increasing altitude throughout the troposphere. This decrease of temperature with altitude is defined as lapse rate. The standard lapse rate seldom exists. In fact, temperature sometimes increases with height. An increase in temperature with altitude is defined as an inversion.
19025 An inversion often develops near the ground on clear, cool nights when wind is light. The ground radiates and cools much faster than the overlying air. Air in contact with the ground becomes cold, while the temperature a few hundred feet above changes very little. Thus, temperature increases with height. Inversions may also occur at any altitude when conditions are favorable. For example, a current of warm air aloft overrunning cold air near the surface produces an inversion aloft.
19026 Low level inversions, which are usually of most interest to the balloon pilot, generally dissipate through the daylight hours as the air mixes with insolation.
Heat Transfer
19027 The heat source for this planet is the sun; energy from the sun is transferred through space and the Earth’s atmosphere to the Earth’s surface. As this energy warms the Earth’s surface and atmosphere, some of it is or becomes heat energy. Heat is transferred into the atmosphere in three ways: radiation, conduction, and convection.
Radiation
19028 Radiation is the transfer of heat by electromagnetic waves. No medium of transfer is required between the radiator and the body being irradiated (receiving the radiation). Heat waves, a form of this electromagnetic energy, may be reflected. In meteorology, the principal reflectors are the Earth’s surface, water vapor in the air, and particulate matter in the atmosphere.
Conduction
19029 Conduction is the transfer of heat energy from one substance to another or within a substance. As with electricity, some materials are good conductors while others are poor conductors. Poor conductors are considered to be insulators. Air is one of the poorest conductors of heat in comparison to silver, one of the best conductors. Silver will pass 20,000 times more heat than an equal mass of air across a similar temperature difference during a fixed period of time. Conduction in the atmosphere is considered to be a significant method of heat exchange only at the Earth’s surface, where the lowest few centimeters of the atmosphere are actually in contact with the ground or water.
Convection
19030 Convection is the transfer of heat energy in a fluid. This type of heating is most commonly seen in the kitchen when a liquid boils. This type of heat transfer occurs in the atmosphere when the ground is heated by the sun. The warm ground heats the air above it by radiation and conduction, causing the warm air to rise. Meanwhile, the dense cooler air aloft moves in to take the warm ground air’s place to be heated.
19031 Heat can be transferred by convection in either a vertical or a horizontal direction. In meteorology, “advection” is the term used for the horizontal transport of heat by wind. It is important to differentiate between the vertical and horizontal paths of convection. In the atmosphere, the amount of heat transferred horizontally over the surface of the Earth by advection is about 1,000 times greater than that transferred by convection.
The Adiabatic Process
19032 The adiabatic process is the change of the temperature of air without transferring heat. In an adiabatic process, compression results in warming, and expansion results in cooling. The adiabatic process takes place in all upward and downward moving air. When air rises into an area of lower pressure, it expands to a larger volume. As the molecules of air expand, the temperature of the air lowers. As a result, when a parcel of air rises, pressure decreases, volume increases, and temperature decreases. When air descends, the opposite is true.
19033 Since air is composed of a mixture of gases subject to heating when compressed and cooling when expanded, air will rise, seeking a level where the pressure of the body of air is equal to the pressure of the air that surrounds it. Whatever the cause of the lifting, the air rises, and the pressure decreases, allowing the “parcel of air” to expand. This continues until it reaches an altitude similar in pressure and density to its own. As it expands, it cools through the adiabatic process and no heat is added or withdrawn from the system in which it operates. As air rises, it is cooled because it is expanding by moving to an altitude where pressure and density is less. This is adiabatic cooling. When the process is reversed and air is forced downward, it is compressed, causing it to heat by a process called adiabatic heating
Air Masses
19034 An air mass is a large body of air (usually 1,700 kilometers or more across) whose physical properties (temperature and humidity) are horizontally uniform. The weather is a direct result of the continuous alternation of the influences of warm and cold air masses. Warm air masses predominate in the summer, and cold air masses predominate in the winter. However, both cold and warm air, alternately, may prevail almost anywhere in the temperature zone at any season. The basic characteristics of any air mass are temperature and humidity. These properties are relatively uniform throughout the air mass, and it is by measurement of these properties that the various types of air masses are determined.
Characteristics
19035 Air masses acquire the characteristics of the surrounding area, or source region. The characteristics of an air mass consist of the basic properties of moisture and temperature, which include:
19036 • Stability.
19037 • Cloud Types.
19038 • Sky coverage.
14738 • Visibility.
19040 • Precipitation.
19041 • Icing.
7031 • Turbulence.
19043 The terrain surface underlying the air mass is the primary factor in determining air mass characteristics.
19044 A source region is typically an area in which the air remains relatively stagnant for a period of days or longer. During this time of stagnation, the air mass takes on the temperature and moisture characteristics of the source region. Areas of stagnation can be found in polar regions, tropical oceans, and dry deserts. Air masses are classified by region of origination:
19045 • Polar or tropical.
19046 • Maritime or continental.
19047 A continental polar air mass forms over a polar landmass and is characterized by cool and dry conditions. Maritime tropical air masses form over warm tropical waters like the Caribbean Sea and bring warm, moist air. As the air mass moves from its source region and passes over land or water, the terrain it passes over modifies its qualities, and thus modifies the nature of the air mass.
19048 An air mass passing over a warmer surface will be warmed from below, and convective currents form, causing the air to rise. This creates an unstable air mass with good surface visibility. Moist, unstable air causes cumulus clouds, localized showers, and turbulence to form. Conversely, an air mass passing over a colder surface does not form convective currents, but instead creates a stable air mass with poor surface visibility. The poor surface visibility is due to the fact that moisture, smoke, dust, and other particles cannot rise out of the air mass and are instead trapped near the surface by an inversion. A stable air mass can produce low stratus clouds and fog.
Pressure Systems
19049 The differences that occur with heating and cooling the atmosphere in the lower levels also cause density variations. These variations cause small horizontal pressure differences that are only about one ten-thousandth of the magnitude of the normal change of pressure with altitude, but they significantly impact atmospheric circulation and most weather phenomena. [Figure 4-3]
19050
1016
1008
Figure 4-3 · page 7Picture of the page from the copy saved here
1004
1000
1012
1008
1012
Ridge line
Trough line
Figure 4-3. High and low pressure systems.
19051 A low or cyclone is a pressure system in which the barometric pressure decreases towards the center and the wind flow around the system is counterclockwise in the Northern Hemisphere. Unfavorable flying conditions in the form of low clouds, restricted visibility by precipitation and fog, strong and gusty winds, and turbulence are common in low pressure systems. Thermal low pressure systems caused by intense surface heating and resulting low air density over barren continental areas are relatively dry with few clouds and practically no precipitation. Thermal lows are stationary and predominate over continental areas in the summer. General airflow in a low pressure system, since the atmosphere is attempting to achieve equilibrium, is in (towards the center of the low pressure system), and up. This tendency can affect the overall dynamic of the low pressure system.
19052 A high is a pressure system in which the barometric pressure increases toward the center and the wind flow around the system is clockwise in the Northern Hemisphere. Flying conditions are generally more favorable in highs than in lows because of fewer clouds, light or calm winds, and less concentrated turbulent areas. But, in some situations, visibility may be reduced due to early morning fog, smog, or haze at flight levels. High pressure systems predominate over cold surfaces where the air is dense. General airflow in a high pressure system, in reverse of the low pressure dynamic, is out (away from the center of the pressure system) and down. Again, these airflow tendencies can affect the dynamic of the high pressure system, much like the low.
19053 In the Northern Hemisphere, a general cycle of highs and lows moves through the temperate zones from west to east. The movement of the pressure systems is more rapid in the winter season when the low pressure systems are most intense and the high pressure systems extend farthest to the south. [Figure 4-4]
19054
Hill o
f air
Hill
Figure 4-4 · page 8Picture of the page from the copy saved here
of a
ir
1016
1008
1004
1000
1012
996
1008
1004
1000
1012
996
De
pr
es
si
on
o
r
va
ll
ey
o
f a
ir
2,000 FT
1,500 FT
1,000 FT
500 FT
Figure 4-4. A cross-section of the pressure systems depicted in Figure 4-3.
19055 A trough is an elongated area of low pressure, with the lowest pressure along the trough line. The weather in a trough is commonly violent. Also, troughs can be slow moving.
19056 A ridge is an elongated area of high pressure with highest pressure along the ridge line. The weather in a ridge is generally favorable for flying.
Fronts
19057 Fronts are the boundaries between two air masses and are classified as to which type of air mass (cold or warm) is replacing the other. For example, a cold front demarcates the leading edge of a cold air mass displacing a warmer air mass. A warm front is the leading edge of a warmer air mass replacing a colder air mass. Fronts are also transition zones (boundaries) between air masses that have different densities. The density of air is controlled primarily by the temperature of the air. Therefore, fronts in temperate zones usually form between tropical and polar air masses, but they may also form between arctic and polar air masses. A typical surface weather map shows air mass boundary zones at ground level. Designs on the boundary lines indicate the type of front and its direction of movement. On weather maps in local weather stations, fronts may also be indicated by colored lines. A working knowledge of fronts and their accompanying weather hazards is important to pilots.
Types of Fronts
19058 The four major frontal types are:
19059 • Cold.
19060 • Warm.
19061 • Stationary.
18388 • Occluded.
19063 A front type is determined from the movement of the air masses involved.
Cold Front
19064 A cold front is the leading edge of an advancing mass of colder air. A cold front occurs when a mass of cold, dense, and stable air advances and replaces a body of warmer air. Cold fronts move more rapidly than warm fronts, generally
progressing at a rate of 25 to 30 miles per hour (mph). However, extreme cold fronts have been recorded moving at speeds of up to 60 mph. A typical cold front moves in a manner opposite that of a warm front. Because it is so dense, it stays close to the ground and acts like a snowplow, sliding under the warmer air and forcing the warmer less dense air aloft. [Figure 4-5] The rapidly ascending air causes the temperature to decrease suddenly, forcing the creation of clouds. The type of clouds that form depends on the stability of the warmer air mass. A cold front in the Northern Hemisphere is normally oriented in a northeast to southwest manner and can extend for several hundred miles, encompassing a large area of land. Prior to the passage of a typical cold front, cirriform or towering cumulus clouds are present, and cumulonimbus clouds are possible. Rain showers and haze are possible due to the rapid development of clouds. The wind from the southsouthwest helps to replace the warm temperatures with the relative colder air. A high dew point and falling barometric pressure are indicative of imminent cold front passage.
19065
St. Louis Indianapolis
200 miles Columbus
400 miles Pittsburgh
600 miles
Figure 4-5 · page 9Picture of the page from the copy saved here
COLD AIR
COLD AIR
WARM AIR
NIMBOSTRATUS
ALTOSTRATUS
CIRROSTRATUS
CIRRUS
Figure 4-5. A cold front underrunning warm, moist, stable air. Clouds are stratified and precipitation continuous. Precipitation
induces stratus in the cold air.
19066 As the cold front passes, towering cumulus or cumulonimbus clouds continue to dominate the sky. [Figure 4-6] Depending on the intensity of the cold front, heavy rain showers form and might be accompanied by lightning, thunder, and/or hail. More severe cold fronts can also produce tornadoes. During cold front passage, the visibility may be poor, with winds variable and gusty, and the temperature and dew point drop rapidly. A quickly falling barometric pressure bottoms out during frontal passage, then begins a gradual increase. After frontal passage, the towering cumulus and cumulonimbus clouds begin to dissipate to cumulus clouds, with a corresponding decrease in the precipitation. Good visibility eventually prevails with the winds from the west-northwest. Temperatures remain cooler and the barometric pressure continues to rise.
Figure 4-6 · page 10Picture of the page from the copy saved here
WARM AIR
19067
St. Louis Indianapolis
200 miles Columbus
400 miles Pittsburgh
600 miles
WARM AIR
CO
LD
A
I
R
CUMULONIMBUS
Figure 4-6. A cold front underrunning warm, moist, unstable air. Clouds are cumuliform with possible showers or thunderstorms near the surface position of the front. Convective clouds often develop in the warm air ahead of the front. The warm, wet ground behind the
front generates low-level convection and fair-weather cumulus in the cold air
Fast-Moving Cold Front
19068 Fast-moving cold fronts are pushed by intense pressure systems far behind the actual front. [Figure 4-7] The friction between the ground and the cold front retards the movement of the front and creates a steeper frontal surface. This results in a very narrow band of weather concentrated along the leading edge of the front. If the warm air being overtaken by the cold front is relatively stable, overcast skies and rain may occur for some distance ahead of the front. If the warm air is unstable, scattered thunderstorms and rain showers may form. A continuous line of thunderstorms, or squall line, may form along or ahead of the front. Squall lines present a serious hazard to pilots as squall type thunderstorms are intense and move quickly. Behind a fast-moving cold front, the skies usually clear rapidly and the front leaves behind gusty, turbulent winds and colder temperatures.
19069
St. Louis Indianapolis
200 miles Columbus
400 miles Pittsburgh
600 miles
Figure 4-7 · page 10Picture of the page from the copy saved here
WARM UNSTABLE AIR WARM UNSTABLE AIR
WARM UNSTABLE AIR WARM UNSTABLE AIR
CO
LD
A
I
R
Figure 4-7. A fast-moving cold front underrunning warm, moist, unstable air. Showers and thunderstorms develop along the surface
position of the front.
Warm Front
19070 A warm front is actually the trailing edge of a retreating mass of cold air. A warm front occurs when a warm mass of air advances and replaces a body of colder air. Warm fronts move slowly, typically 10 to 25 mph. The slope of the advancing
front slides over the top of the cooler air and gradually pushes it out of the area. Warm fronts contain warm air that often has very high humidity. As the warm air is lifted, the temperature drops and condensation occurs. Prior to the passage of a warm front, cirriform or stratiform clouds, along with fog, can be expected to form along the frontal boundary. [Figure 4-8] In the summer months, cumulonimbus clouds (thunderstorms) are likely to develop. Light to moderate precipitation is probable, usually in the form of rain, sleet, snow, or drizzle, punctuated by poor visibility. The wind blows from the southsoutheast, and the outside temperature is cool or cold, with increasing dew point. Finally, as the warm front approaches, the barometric pressure continues to fall until the front passes completely.
19071
St. Louis Indianapolis
200 miles Columbus
400 miles Pittsburgh
600 miles
Figure 4-8 · page 11Picture of the page from the copy saved here
WARM STABLE AIR WARM STABLE AIR
WARM STABLE AIR WARM STABLE AIR
Figure 4-8. A warm front with overrunning moist, stable air. Clouds are stratiform and widespread over the shallow front.
Precipitation is continuous and induces widespread stratus in the cold air.
19072 During the passage of a warm front, stratiform clouds are visible and drizzle may be falling. The visibility is generally poor, but improves with variable winds. The temperature rises steadily from the inflow of relatively warmer air. Usually, the dew point remains steady and the pressure levels off. After the passage of a warm front, stratocumulus clouds predominate and rain showers are possible. The visibility eventually improves, but hazy conditions may exist for a short period after passage. The wind generally blows from the south-southwest. With warming temperatures, the dew point rises and then levels off. There is generally a slight rise in barometric pressure, followed by a decrease in barometric pressure.
Stationary Front
19073 When an air mass boundary is neither advancing nor retreating along the surface, the front is called a stationary front. Although there is no movement of the surface position of a true stationary front, an uplift of air may occur along the frontal boundary. If the uplifted air is stable and saturated, stratiform clouds may occur. Intermittent drizzle may occur, and if lifted above the freezing level, icing conditions and frozen precipitation will exist. If the uplifted air is conditionally unstable and saturation occurs, predominately cumuliform clouds will form, possibly generating thunderstorm activity.
Occluded Front
19074 An occluded front occurs when a fast-moving cold front catches up with a slow-moving warm front. As the occluded front approaches, warm front weather prevails, but is immediately followed by cold front weather. There are two types of occluded fronts that can occur, and the temperatures of the colliding frontal systems play a large part in defining the type of front and the resulting weather. A cold front occlusion occurs when a fast-moving cold front is colder than the air ahead of the slow-moving warm front. When this occurs, the cold air replaces the cool air and forces the warm front aloft into the atmosphere. Typically, the cold front occlusion creates a mixture of weather found in both warm and cold fronts, if the air is relatively stable. A warm front occlusion occurs when the air ahead of the warm front is colder than the air of the cold front. When this is the case, the cold front rides up and over the warm front. If the air forced aloft by the warm front occlusion is unstable, the weather will be more severe than the weather found in a cold front occlusion. Embedded thunderstorms, rain, and fog are likely to occur.
Surface Fronts
19075 The air mass boundaries indicated on a surface weather map are called surface fronts. A surface front is the position of a front at the Earth’s surface. The weather map shows only the location of fronts on the surface, but these fronts also have vertical extent. For example, the colder, heavier air mass tends to flow under the warmer air mass. The underrunning mass produces the lifting action of warm air over cold air, causing clouds and associated frontal weather.
19076 The vertical boundary between the warm and cold air masses is a frontal surface, and slopes upward over the colder air mass. The frontal surface lifts the warmer air mass and produces frontal cloud systems. The slope of the frontal surface varies with the speed of the moving cold air mass, and the roughness of the underlying terrain. Under normal conditions, the angle of inclination (slope ratio) between the frontal surface and the Earth’s surface is greater with cold fronts than with warm fronts. The approximate height of the frontal surface over any station is determined from the analysis of upper air observations.
19077 Frontal passage (FROPA) affects ballooning activities because it can generate precipitation, wind shifts, significant changes in temperature, and many other conditions hazardous to ballooning. Balloon pilots usually do not fly in the face of an approaching front; in fact, many have a rule that they do not fly within 18 to 24 hours prior to frontal passage, particularly if the approaching front has any significant strength associated with it. The FSS often can advise of the time a cold front will pass a given reporting station, which assists in flight planning.
Winds & Currents
19078 Pressure and temperature changes produce two kinds of motion in the atmosphere—vertical movement of ascending and descending currents, and horizontal movement in the form of wind. Both types of motion in the atmosphere are important as they affect the takeoff, landing, and in-flight operations. More important, however, is that these motions in the atmosphere, otherwise called atmospheric circulation, cause weather changes.
19079 Understanding wind and current circulation patterns is important for a balloon pilot because balloons are maneuvered solely through interaction with the different layers of wind and current. By using knowledge of the Coriolis force, pressure gradient force, and surface friction, it is possible to predict with a high degree of accuracy the potential track over the countryside and land at a predetermined point. This skill is the mark of a competent, safety conscious balloon pilot.
Atmospheric Circulation
19080 Three forces cause the wind to move as it does: the Coriolis force, the pressure gradient force, and surface friction. All three forces work together at the same time.
19081 As defined earlier, atmospheric circulation is the movement of air around the surface of the Earth caused by the uneven heating of the Earth’s surface that upsets the equilibrium of the atmosphere, creates changes in air movement, and affects atmospheric pressure. Because the Earth has a curved surface that rotates on a tilted axis while orbiting the sun, the equatorial regions of the Earth receive a greater amount of heat from the sun than the polar regions. The amount of sun heating the Earth depends upon the time of day, time of year, and the latitude of the specific region. All of these factors affect the length of time and the angle at which sunlight strikes the surface.
19082 In general atmospheric circulation theory, areas of low pressure exist over the equatorial regions, and areas of high pressure exist over the polar regions due to a difference in temperature. Solar heating causes air to become less dense and rise in equatorial areas. The resulting low pressure allows the high pressure air at the poles to flow along the planet’s surface toward the equator. As the warm air flows toward the poles, it cools, becoming more dense, and sinks back toward the surface. [Figure 4-9] This pattern of air circulation is correct in theory, but the circulation of air is modified by other forces.
19083
• Expands • Decreases density • Rises
Air Heated
• Flows toward Earth • Flows back to equator
Air Cooled
Figure 4-9. General circulation theory.
Figure 4-9 · page 13Picture of the page from the copy saved here
19084 The speed of the Earth’s rotation causes the general flow to break up into three distinct cells in each hemisphere. [Figure 4-10] In the Northern Hemisphere, the warm air at the equator rises upward from the surface, travels northward, and is deflected eastward by the rotation of the Earth. By the time it has traveled one-third of the distance from the equator to the North Pole, it is no longer moving northward, but eastward. This air cools and sinks in a belt-like area at about 30° latitude, creating an area of high pressure as it sinks toward the surface. Then, it flows southward along the surface back toward the equator. Coriolis force bends the flow to the right, thus creating the northeasterly trade winds that prevail from 30° latitude to the equator. Similar forces create circulation cells that encircle the Earth between 30° and 60° latitude, and between 60° and the poles. This circulation pattern results in the prevailing westerly winds in the conterminous United States.
19085
Figure 4-10. Three cell circulation pattern caused by the rotation of the Earth.
Figure 4-10 · page 13Picture of the page from the copy saved here
19086 Circulation patterns are further complicated by seasonal changes, differences between the surfaces of continents and oceans, and other factors such as frictional forces caused by the topography of the Earth’s surface which modify the movement of the air in the atmosphere. For example, within 2,000 feet of the ground, the friction between the surface and the atmosphere
slows the moving air. The wind is diverted from its path because the frictional force reduces the Coriolis force. Thus, the wind direction at the surface varies somewhat from the wind direction just a few thousand feet above the Earth.
Coriolis Force
19087 The Coriolis force is not perceptible to humans as they walk around because humans move slowly and travel relatively short distances compared to the size and rotation rate of the Earth. However, the Coriolis force significantly affects bodies that move over great distances, such as an air mass or body of water.
19088 The Coriolis force deflects air to the right in the Northern Hemisphere, causing it to follow a curved path instead of a straight line. The amount of deflection differs depending on the latitude. It is greatest at the poles, and diminishes to zero at the equator. The magnitude of Coriolis force also differs with the speed of the moving body—the faster the speed, the greater the deviation. In the Northern Hemisphere, the rotation of the Earth deflects moving air to the right and changes the general circulation pattern of the air.
19089 Pertinent facts about the Coriolis force:
19090 • The Coriolis force deflection is perpendicular to the flow of air.
19091 • The Coriolis force will deflect air to the right in the Northern Hemisphere, and to the left in the Southern Hemisphere.
19092 • The Coriolis force is strongest at the Poles and decreases to zero at the Equator.
19093 • The Coriolis force is zero with calm winds and increases in magnitude as wind speed increases.
19094 • Coriolis force, in combination with other forces involved, will determine the different circulation patterns over the Earth.
Pressure Gradient
19095 Pressure gradient is the difference in pressure between high and low pressure areas. It is the rate of change in pressure in a direction perpendicular, or across the isobars. Wind speed is directly proportional to the pressure gradient. This means the strongest winds are in the areas where the pressure gradient is the greatest. Since pressure applied to a fluid is exerted equally in all directions throughout the fluid, a pressure gradient exists in the horizontal (along the surface), as well as in the vertical (with altitude) plane in the atmosphere. [Figure 4-11]
19096
1020
1016
1012
Isobars
• The wider the pressure gradient, the weaker the wind.
Weak or Flat Pressure Gradient
• The closer the spacing of isobars, the stronger the pressure gradient. • The stronger the pressure gradient, the stronger the wind.
Strong or Steep Pressure Gradient
Figure 4-11. Principles of pressure gradients.
Figure 4-11 · page 14Picture of the page from the copy saved here
19097 The horizontal pressure gradient is steep or strong when the isobars determining the pressure gradient are close together. It is flat or weak when the isobars are far apart. If isobars are considered as depicting atmospheric topography, a high pressure system represents a hill of air, and a low pressure system represents a valley of air. The vertical pressure gradient always indicates a decrease in pressure with altitude, but the rate of pressure decrease (gradient) varies directly with changes in air density with altitude. The vertical cross section through a high and a low depicts the surface pressure gradient.
19098 The pressure gradient force is a force that tries to equalize pressure differences. This is the force that causes high pressure to push air toward low pressure. Thus, air would flow from high to low pressure if the pressure gradient force was the only force acting on it.
Surface Friction
19099 Friction is the third component that determines the flow of wind. Because the surface of the Earth is rough, it not only slows the wind down, it also causes the diverging winds from highs and converging winds near lows. Since the Coriolis force varies with the speed of the wind, a reduction in the wind speed by friction means a reduction of the Coriolis force. This results in a momentary disruption of the balance. When the new balance (including friction) is reached, the air flows at an angle across the isobars from high pressure to low pressure. This angle varies from 10° over the ocean to more than 45° over rugged terrain. Frictional effects on the air are greatest near the ground, but the effects are also carried aloft by turbulence. Surface friction is effective in slowing the wind up to an average altitude of 2,000 feet above the ground. Above this level, the effect of friction decreases rapidly and may be considered negligible. Air above 2,000 feet above the ground normally flows parallel to the isobars. [Figure 4-12 and Figure 4-13]
19100
1020
1016
HIGH
LOW
Surface Wind
Figure 4-12 · page 15Picture of the page from the copy saved here
Gradient Wind 1,000 Feet
Gradient Wind 2,000 Feet
Gradient Wind 3,000 Feet
Figure 4-12. Examples of variations of wind direction with height.
19101
1028
1024
1020
HIGH
LOW
Increases with velocity Coriolis Force
Depends on spacing of isobars Pressure Gradient Force
Depends on curvature of isobars Centrifugal Force
Gradient wind
Pressure
Gradient Force Centrifugal &
Coriolis Force
Equal and opposite
Figure 4-13. Gradient winds
Wind Patterns
19102 Since air always seeks out lower pressure, it flows from areas of high pressure into those of low pressure. In the Northern Hemisphere, this flow of air from areas of high to low pressure is deflected to the right and produces a clockwise circulation around an area of high pressure known as anticyclonic circulation. The opposite is true of low pressure areas; the air flows toward a low and is deflected to create a counter-clockwise or cyclonic circulation.
Figure 4-13 · page 16Picture of the page from the copy saved here
19103 High pressure systems are generally areas of dry, stable, descending air. Good weather is typically associated with high pressure systems for this reason. Conversely, air flows into a low pressure area to replace rising air. This air tends to be unstable, and usually brings increasing cloudiness and precipitation. Thus, bad weather is commonly associated with areas of low pressure.
Convective Currents
19104 Convection currents refer to the upward moving portion of a convection circulation, such as a thermal or the updraft in cumulus clouds. The uneven heating of the air, due to different surfaces radiating heat in varying amounts, create small areas of local circulation. For example, plowed ground, rocks, sand, and barren land give off a large amount of heat, while water, trees, and other areas of vegetation tend to absorb and retain heat. Convective currents cause the bumpy, turbulent air sometimes experienced when flying at lower altitudes during warmer weather. On a low altitude flight over varying surfaces, updrafts are likely to occur over pavement or barren places, and downdrafts often occur over water or expansive areas of vegetation like a group of trees. Typically, these turbulent conditions can be avoided by flying at higher altitudes.
19105 Convective currents are particularly noticeable in areas with a land mass directly adjacent to a large body of water, such as an ocean, large lake, or other appreciable area of water. [Figure 4-14] During the day, land heats faster than water, so the air over the land becomes warmer and less dense. It rises and is replaced by cooler, denser air flowing in from over the water. This causes an onshore wind, called a sea breeze. Conversely, at night land cools faster than water, as does the corresponding air. In this case, the warmer air over the water rises and is replaced by the cooler, denser air from the land, creating an offshore wind called a land breeze. This reverses the local wind circulation pattern. Convective currents can occur anywhere there is an uneven heating of the Earth’s surface.
19106
Warm
Cool
Return flow
Land breeze
Warm
Cool
Return flow
Sea breeze
Figure 4-14. Land-sea breezes.
Figure 4-14 · page 17Picture of the page from the copy saved here
19107 Convection currents close to the ground can affect a pilot’s ability to control the balloon. On final approach, for example, the rising air from terrain devoid of vegetation sometimes produces a ballooning effect that can cause a pilot to overshoot the intended landing spot. On the other hand, an approach over a large body of water or an area of thick vegetation tends to create a sinking effect that can cause an unwary pilot to land short of the intended landing spot. This could prove particularly hazardous to a balloon landing in a small, confined area, as the “undershoot” of the approach could potentially put the balloon into the trees or power lines.
The Jet Stream
19108 The jet stream refers to relatively strong winds concentrated in a narrow stream in the atmosphere. These winds are normally horizontal, high altitude winds. The position and orientation of jet streams vary from day to day. General weather patterns (hot/cold, wet/dry) are related closely to the position, strength, and orientation of the jet stream (or jet streams). A jet stream at low levels is known as a low level jet stream. Since it is of interest primarily to high level flight, further discussion is not necessary.
Local and Small-Scale Winds
19109 There are four types of local and small-scale winds to be aware of.
Gradient Winds
19110 Pressure gradients initiate the movement of air and as soon as the air acquires velocity, the Coriolis force deflects it to the right in the Northern Hemisphere. As the speed of the air along the isobars increases, the Coriolis force becomes equal and opposite to the pressure gradient force. After a period of time, the air moves directly parallel to the curved isobars if there
is no frictional drag with the surface. The air no longer moves toward lower pressure because the pressure gradient force is completely neutralized by the Coriolis force and the centrifugal force.
Orographic Winds
19111 The term “orographic” has multiple meanings, when placed in the context of weather phenomena. In a general sense, according to the American Meteorological Society, wind flows that are caused, affected, or influenced by mountains may be said to be orographic winds flows. The term has come to mean any winds that are affected by terrain, not just mountains; this definition is probably the most frequently used, when discussing balloon flight.
19112 As a specific term, “orographic lifting” is defined as an ascending air flow caused by mountains. The mechanisms that produce the orographic lifting fall into two broad categories:
19113 1. The upward deflection of horizontal large-scale air flow by the terrain acting as an obstacle or barrier.
19114 2. The daytime heating of mountain surfaces to produce an anabatic flow (see below) along the slopes and updrafts in the vicinity of mountain peaks.
19115 This definition, while strictly referring only to lifting by mountains, is sometimes extended to include the effects of hills or long sloping terrain. When sufficient moisture is present in the rising air, Orographic fog or clouds may form.
Anabatic Winds
19116 Anabatic winds are those that blow up a steep slope or mountain side. It is sometimes referred to as an upslope flow. These winds typically occur during the daytime in calm, sunny weather. A hill or mountaintop may be warmed by the sun, which in turn heats the air just above it. As that air rises through convection, it creates a low pressure region, into which the air at the bottom of the slope flows, and causes winds.
Katabatic Winds
19117 Katabatic winds are the reverse of anabatic winds; that is, they flow down slope, and most frequently at night. They are created by the effect of the air near the ground losing heat thru radiational cooling at a faster rate than air at a similar altitude over the surrounding land mass.
Clouds
19118 Clouds are weather signposts in the sky. They provide the balloon pilot with visible evidence of the atmospheric motion, water content, and degree of stability. In this sense, clouds are of significant importance to the aeronaut. However, when they become too numerous or widespread, form at low levels, or show extensive vertical development, they present weather hazards to ballooning.
19119 Clouds are visible condensed moisture, consisting of droplets of water or crystals of ice. They are supported and transported by air movements as slow as one-tenth of a mile per hour. Cloud formation is the direct result of saturation producing processes which take place in the atmosphere. A pilot should be able to identify cloud formations that are associated with weather hazards. Knowledge of cloud types will also assist the pilot in interpreting weather conditions from weather reports and existing weather.
Cloud Formation
19120 Clouds are often indicative of future weather. For clouds to form, there must be adequate water vapor and condensation nuclei (miniscule particles of matter like dust, salt, and smoke), as well as a method by which the air can be cooled. When the air cools and reaches its saturation point, the invisible water vapor changes into a visible state. Through the processes of sublimation and condensation, moisture condenses or sublimates onto condensation nuclei. The nuclei are important because they provide a means for the moisture to change from one state to another.
19121 Cloud type is determined by its height, shape, and behavior. They are classified according to the height of their bases as low, middle, or high clouds, as well as clouds with vertical development. The International Cloud Classification is designed to provide a uniform cloud classification system. [Figure 4-15] Within this system, cloud types are usually divided into four major groups and further classified in terms of their forms and appearance.
19122
Figure 4-15 · page 19Picture of the page from the copy saved here
International Cloud Classification Abbreviations and Weather Map Symbols
Base Altitude Cloud Type Abbreviation Symbol
Bases of high clouds usually
above 18,000
feet
Cirrus CI
Cirrocumulus CC
Cirrostratus CS
Altocumulus AC
Altostratus AS
* Cumulus CU
* Cumulonimbus Cb
Nimbostratus NS
Stratocumulus SC
Stratus St
Bases of middle
clouds range from 6,500 feet
to 18,000 feet
Bases of low clouds range
from surface to 6,500 feet
* Cumulus and cumulonimbus are clouds with vertical development. Their bases are usually below 6,500 feet, but may be slightly higher. The tops of the cumulonimbus some times exceed 60,000 feet.
18,000 FT
6,500 FT
Surface
Figure 4-15. Cloud classification per international agreement.
19123 The four major groups are:
19124 • Low clouds.
19125 • Middle clouds.
19126 • High clouds.
19127 • Clouds with vertical development.
19128 Cloud classification can be further broken down into specific cloud types according to the outward appearance and cloud composition. Knowing these terms can help identify visible clouds. The following is a list of cloud classifications:
10105 • Cumulus—heaped or piled clouds.
18379 • Stratus—formed in layers.
19131 • Cirrus—ringlets, fibrous clouds, also high-level clouds above 20,000 feet.
18381 • Castellanus—common base with separate vertical development, castle-like.
19133 • Lenticularus—lens shaped, formed over mountains in strong winds.
18383 • Nimbus—rain-bearing clouds.
18384 • Fracto—ragged or broken.
19136 • Alto—meaning high, also middle-level clouds existing at 5,000 to 20,000 feet.
19137 Low clouds are those that form near the Earth’s surface. The low cloud group consists of stratus and stratocumulus clouds. [Figure 4-16 and Figure 4-17] Clouds in this family create low ceilings, hamper visibility, and can change rapidly. Because of this, they influence flight planning and can make visual flight rules (VFR) flight impossible. The bases of these clouds can start near the surface, with the top extending to 6,500 feet or more above the terrain. Low clouds are of great importance to the balloon pilot, as they can create low ceilings and poor visibility. The heights of the cloud bases may change rapidly. If low clouds form below 50 feet, they are classified as fog, and may completely blanket landmarks and landing fields.
19138
Figure 4-16. Stratus clouds.
19139
Figure 4-17. Stratocumulus clouds.
Figure 4-16 · page 20Picture of the page from the copy saved here
19140 Middle clouds form around 6,500 feet above ground level (AGL) and extend up to 20,000 feet AGL. They are composed of water, ice crystals, and supercooled water droplets. The middle cloud group consists of altocumulus [Figure 4-18], altostratus, and nimbostratus [Figure 4-19] clouds. Altocumulus clouds, which usually form when altostratus clouds are breaking apart, also may contain light turbulence and icing. Altostratus clouds can produce turbulence and may contain moderate icing. The altocumulus has many variations in appearance and formation, whereas the altostratus varies mostly in thickness, from very thin to several thousand feet. Bases of the middle clouds start as low as 6,500 feet and tops can range as high as 20,000 feet above the terrain. These clouds may be composed of ice crystals or water droplets (which may be supercooled). Altocumulus rarely produces precipitation, but altostratus usually indicates the proximity of unfavorable flying weather and precipitation.
19141
Figure 4-18. Altocumulus clouds.
19142
Figure 4-19. Nimbostratus clouds.
Figure 4-18 · page 21Picture of the page from the copy saved here
19143 High clouds form above 20,000 feet AGL and usually form only in stable air. The high cloud group consists of cirrus, cirrocumulus, and cirrostratus clouds. The mean base level of these three cloud types starts at 18,000 feet or higher above terrain. Cirrus clouds [Figure 4-20] may give indications of approaching weather changes. Cirriform clouds are composed of ice crystals, are generally thin, and the outline of the sun or moon may sometimes be seen through them, producing a halo or corona effect. High clouds are generally of no interest to the balloon pilot, other than they may indicate future conditions.
19144
Figure 4-20. Cirrus clouds.
Figure 4-20 · page 22Picture of the page from the copy saved here
19145 Clouds with extensive vertical development are cumulus clouds that build vertically into towering cumulus or cumulonimbus clouds, often developing into thunderstorms. The bases of these clouds form in the low to middle cloud region, but can extend into high altitude cloud levels. Towering cumulus clouds indicate areas of instability in the atmosphere, and the air around and inside them is turbulent. These clouds generally have their bases below 6,500 feet above the terrain and tops sometimes extend above 60,000 feet. Clouds with extensive vertical development are caused by lifting action, such as convective currents, orographic lift, or frontal lift.
19146 Scattered cumulus or isolated cumulonimbus clouds seldom present a flight problem, since these clouds can usually be circumnavigated without difficulty. However, these clouds may rapidly develop in groups or lines of cumulonimbus. They may also become embedded and hidden in stratiform clouds, resulting in hazardous flight conditions.
19147 Within the high, middle, and low cloud groups are two main subdivisions. These are:
19148 • Clouds formed when localized vertical currents carry moist air upward to the condensation level. These vertical development clouds are characterized by their lumpy or billowy appearance, and are designated cumuliform type clouds, meaning “accumulation” or “heap.” Turbulent flying conditions usually exist in, below, around, and above cumuliform clouds.
19149 • Clouds formed when complete layers of air are cooled until condensation takes place. These clouds are stratiform type clouds, meaning “layered out,” since they lie mostly in horizontal layers or sheets. Flight in stratiform cloud conditions is usually smooth.
19150 In addition to the two main subdivisions discussed above, is the word nimbus, meaning “rain cloud.” These clouds normally produce heavy precipitation, either liquid or solid. For example, a stratiform cloud producing precipitation is referred to as nimbostratus, and a heavy, swelling cumulus cloud that has grown into a thunderstorm is referred to as cumulonimbus
19151 Cumulonimbus clouds contain large amounts of moisture and unstable air, and usually produce hazardous weather phenomena such as lightning, hail, tornadoes, gusty winds, and wind shear. These extensive vertical clouds can be obscured by other cloud formations and are not always visible from the ground or while in flight. When this happens, these clouds are said to be embedded, hence the term, embedded thunderstorms.
10101 To pilots, the cumulonimbus cloud is perhaps the most dangerous cloud type. It appears individually or in groups and is known as either an air mass or orographic thunderstorm. Heating of the air near the Earth’s surface creates an air mass thunderstorm; the upslope motion of air in the mountainous regions causes orographic thunderstorms. Cumulonimbus clouds that form in a continuous line are nonfrontal bands of thunderstorms or squall lines.
19153 Knowledge of principal cloud types and the factors that affect them helps the pilot visualize expected weather conditions, and to recognize potential weather hazards.
Ceilings & Visibilities
19154 Ceilings and visibilities have an important role in the classification of sky conditions, and are critical for the definition of flight restrictions. It is necessary to define these terms to make those distinctions clear for the balloon pilot.
Ceiling
19155 For aviation purposes, a ceiling is the lowest layer of clouds reported as being broken or overcast, or the vertical visibility into an obscuration like fog or haze.
19156 Observations are made using the concept of the “celestial dome,” the hemisphere of sky which can be seen from a specific point on the ground. Cloud coverage is reported as the total cloud cover at and below a specific layer, and is reported in one-eighth increments (octals). A ceiling is reported as broken when five-eighths to seven-eighths of the sky is covered with clouds. Overcast means the entire sky is covered with clouds.
19157 Current ceiling information is reported by the aviation routine weather report (METAR) and automated weather stations of various types. Ceilings are reported in height AGL.
Visibility
19158 Closely related to cloud cover and reported ceilings is visibility information. Visibility refers to the greatest horizontal distance at which prominent objects can be viewed with the naked eye. Visibilities reported in standard weather reports are horizontal surface visibilities and are generally considered linear. Predominant visibility is the greatest horizontal distance over which objects can be seen and identified over at least half of the horizon. In the United States, prevailing visibilities are reported in statute miles and portions thereof.
19159 Since prevailing visibility is used for reporting purposes, three miles visibility does not mean that a pilot must have one and one half miles visibility in front of and behind the balloon, but that the predominant visibility in most quadrants must be three miles.
19160 Current visibility is reported in METAR and other aviation weather reports, as well as automated weather stations. Visibility information is available during a preflight weather briefing.
Temperature/Dew Point Relationship
10080 The relationship between dew point and temperature defines the concept of relative humidity. The dew point, given in degrees, is the temperature at which the air can hold no more moisture. When the temperature of the air is reduced to the dew point, the air is completely saturated and moisture begins to condense out of the air in the form of fog, dew, frost, clouds, rain, or snow.
19162 As moist, unstable air rises, clouds often form at the altitude where temperature and dew point reach the same value. When lifted, unsaturated air cools at a rate of 5.4 °F per 1,000 feet and the dew point temperature decreases at a rate of 1 °F per 1,000 feet. This results in a convergence of temperature and dew point at a rate of 4.4 °F. A pilot can determine the height of the cloud base by applying the convergence rate to the reported temperature and dew point in the following manner:
19163 Temperature (T) = 85 °F.
19164 Dew point (DP) = 71 °F.
19165 Convergence Rate (CR) = 4.4°.
19166 T – DP = Temperature Dew Point Spread (TDS).
19167 TDS ÷ CR = X.
19168 X x 1,000 feet = height of cloud base AGL
9856 Example:
19170 85 °F – 71 °F = 14 °F.
19171 14 °F ÷ 4.4 °F = 3.18.
19172 3.18 x 1,000 = 3,180 feet AGL.
19173 The height of the cloud base is 3,180 feet AGL.
19174 Explanation: With an outside air temperature (OAT) of 85 °F at the surface, and dew point at the surface of 71 °F, the spread is 14 °F. Divide the temperature dew point spread by the convergence rate of 4.4 °F, and multiply by 1,000 to determine the approximate height of the cloud base.
19175 This relationship is useful in determining the height of the overlying cloud base when completing preflight preparations.
Fog
19176 Fog is a cloud that begins within 50 feet of the surface. It typically occurs when the temperature of air near the ground is cooled to the air’s dew point. At this point, water vapor in the air condenses and becomes visible in the form of fog. Fog is classified according to the manner in which it forms and is dependent upon the current temperature and the amount of water vapor in the air.
19177 Fog is composed of minute droplets of water or ice crystals suspended in the atmosphere with no visible downward motion. It is one of the most common and persistent weather hazards encountered by balloonists. Similar to stratus clouds, the base of fog is at the Earth’s surface while the base of 4-19 a cloud is at least 50 feet above the surface. Fog may be distinguished from haze by its dampness and gray color. It is hazardous during takeoffs and landings, as well as the in-flight process, because it restricts surface visibility. Knowledge of fog formation and dissipation processes, as well as types of fog help the balloon pilot plan a flight more accurately
Fog Formation
19178 Since neither condensation nor sublimation occurs unless the relative humidity is near 100 percent, a high relative humidity is of prime importance in the formation of fog. The natural conditions which bring about a high relative humidity (saturation) are also fog-producing processes, such as the evaporation of additional moisture into the air or cooling of the air to its dew point temperature. A high relative humidity can be estimated, from hourly sequence reports, by determining the spread (difference in degrees) between the temperature and dew point. Fog rarely occurs when the spread is more than 2.2 °C. It is most frequent when the spread is less than 1.1 °C.
19179 A light wind is generally favorable for fog formation. It causes a gentle mixing action, which spreads surface cooling through a deeper layer of air and increases the thickness of the fog.
19180 Although most regions of the Earth have sufficient condensation nuclei to permit fog formation, the amount of smoke particles and sulphur compounds in the vicinity of industrial areas is pronounced. In these regions, persistent fog may occur with above average temperature-dew point spreads.
19181 Fog tends to dissipate when the relative humidity decreases. During this decrease, the water droplets evaporate or ice crystals undergo sublimation, and the moisture is no longer visible. Either strong winds or heating processes may cause the decrease in relative humidity.
Some Fog Types & Characteristics
19182 There are four main types of fog you should be aware of.
Radiation Fog
19183 Radiation fog forms after the Earth has radiated back to the atmosphere the heat gained during daylight hours. By early morning, the temperature at the surface may drop more than 11 °C. Since the dew point temperature (moisture content) of the air normally changes only a few degrees during the night, the temperature-dew point spread will decrease as the air is cooled by contact with the cold surface. If the radiational cooling is sufficient, and other conditions are favorable, radiation fog will form. Radiation fog is most likely when the:
19184 • Sky is clear (maximum radiational cooling).
19185 • Moisture content is high (narrow temperature-dew point spread).
19186 • Wind is light (less than 7 knots).
Advection Fog
19187 The movement of warm moist air over a colder surface creates advection fog which is common along coastal regions where the temperature of the land surface and the water surface contrasts. The southeastern area of the United States provides ideal conditions for advection fog formation during the winter months. If air flows (advection) from the Gulf of Mexico or the Atlantic Ocean over the colder continent, this warm air is cooled by contact with the cold ground. If the temperature of the air is lowered to the dew point temperature, fog will form. Advection fog, forming under these conditions, may extend over larger areas of the nation east of the Rockies. It may persist throughout the day or night until replaced by a drier air mass
19188 If advection fog forms over water, it is often referred to as sea fog. Cold ocean currents, such as those off the coast of California, may cool and saturate moist air coming from the warmer areas of the open sea. Sea fog is often dense offshore, as well as onshore.
19189 As advection fog moves inland during the winter, the colder land surface often causes sufficient contact cooling to keep the air saturated. The fog may then persist during the day or with a wind speed of 10 to 15 knots.
Valley Fog
19190 During the evening hours, cold dense air will drain from areas of higher elevation into low areas of valleys. As the cool air accumulates in the valleys, the air temperature may decrease to the dew point temperature, causing a dense formation of valley fog. While higher elevations may often remain clear throughout the night, the ceiling and visibility become restricted in the valley.
19191 Fog formed by the addition of moisture to the air is called evaporation fog. The major types of evaporation fog are frontal fog and steam fog
19192 Frontal fog is normally associated with slow-moving winter frontal systems. Frontal fog forms when liquid precipitation, falling from the maritime tropical air above the frontal surface, evaporates in the polar air below the frontal surface. Evaporation from the falling drops may add sufficient water vapor to the cold air to raise the dew point temperature to the temperature of the air. The cold air will then be saturated, and frontal fog will form. Frontal fog is common with active warm fronts during all seasons. It occurs ahead of the surface front in an area approximately 100 miles wide. It is, therefore, frequently mixed with intermittent rain or drizzle. When fog forms ahead of the warm front, it is called prefrontal fog. A similar fog formation may occur in the polar air along a stationary front. Occasionally, a slow-moving winter cold front with light wind may generate fog. This fog forms in the polar air behind the surface front and is known as postfrontal fog.
19193 Steam fog forms when cold stable air flows over a non-frozen water surface that is several degrees warmer than the air. The intense evaporation of moisture into the cold air saturates the air and produces fog. Conditions favorable for steam fog are common over lakes and rivers in the fall and over the ocean in the winter when an offshore wind is blowing.
Atmospheric Stability & Instability
19194 A stable atmosphere resists upward or downward movement, and small vertical disturbances dampen out and disappear. An unstable atmosphere allows an upward or downward disturbance to grow into a vertical or convective current allowing small vertical air movements to become larger, resulting in turbulent airflow and convective activity. Instability can lead to significant turbulence, extensive vertical clouds, and severe weather.
19195 Rising air expands and cools due to the decrease in air pressure as altitude increases. The opposite is true of descending air; as atmospheric pressure increases, the temperature of descending air increases as it is compressed. This adiabatic process (heating or cooling) takes place in all upward and downward moving air.
19196 When air rises into an area of lower pressure, it expands to a larger volume. As the molecules of air expand, the temperature of the air lowers. As a result, when a parcel of air rises, pressure decreases, volume increases, and temperature decreases. When air descends, the opposite is true.
10072 Since water vapor is lighter than air, moisture decreases air density, causing it to rise. Conversely, as moisture decreases, air becomes denser and tends to sink. Since moist air cools at a slower rate, it is generally less stable than dry air since the moist air must rise higher before its temperature cools to that of the surrounding air. The dry adiabatic lapse rate (unsaturated air) is 3 °C (5.4 °F) per 1,000 feet. The moist adiabatic lapse rate varies from 1.1 °C to 2.8 °C (2 °F to 5 °F) per 1,000 feet.
10073 The combination of moisture and temperature determine the stability of the air and the resulting weather. Cool, dry air is very stable and resists vertical movement, which leads to good and generally clear weather. The greatest instability occurs when the air is moist and warm, as it is in the tropical regions in the summer. Typically, thunderstorms appear on a daily basis in these regions due to the instability of the surrounding air.
19198 The normal flow of air tends to be horizontal. If this flow is disturbed, a stable atmosphere will resist any upward or downward displacement. It will tend to return quickly to normal horizontal flow. An unstable atmosphere, on the other hand, will allow these upward and downward disturbances to grow, resulting in rough (turbulent) air. An example is the towering thunderstorm which grows as a result of large and intensive vertical movement or air. It climaxes in lightning, thunder, and heavy precipitation, sometimes including hail.
19199 Atmospheric resistance to vertical motion, called stability, depends upon the vertical distribution of the air’s weight at a particular time. The weight varies with air temperature and moisture content. In comparing two parcels of air, warmer air is lighter than colder air, and moist air is lighter than dry air. If air is relatively warmer or moister that its surroundings, it is forced to rise and would be unstable. If the air is colder or dryer than its surroundings, it will sink until it reaches its equilibrium, and would be stable. The atmosphere can be at equilibrium only when light air is above heavier air.
19200 Temperature has a significant effect on the stability or instability of the air mass. Air heated near the Earth’s surface on a hot summer day will rise. The speed and vertical extent of its travel depends on the temperature distribution of the atmosphere. Vertical air currents, resulting from the rise of air, can vary from the severe downdraft and compensating downdraft associated with thunderstorms to the closely spaced upward and downward bumps that are felt on warm days when flying at low levels. Since the temperature of air is an indication of its density, a comparison of temperatures from one level to another can approximate the degree of the atmosphere’s stability, or how much it will tend to resist vertical motion.
Types of Stability
19201 The five types of atmospheric stability are:
19202 • Absolute stability.
19203 • Absolute instability.
19204 • Conditional instability.
19205 • Neutral instability.
19206 • Convective instability.
19207 Absolute stability occurs when the actual lapse rate in a layer of air is less than the moist adiabatic lapse rate; that air is absolutely stable regardless of the amount of moisture it contains. A parcel of absolutely stable air which is lifted becomes cooler than the surrounding air and sinks back to its original position as soon as the lifting force is removed.
19208 Similarly, if forced to descend, it becomes warmer than the surrounding air; like a cork in water, it rises to its original position upon removal of the outside force.
19209 Absolute instability exists when the actual lapse rate in a layer of air is greater than the dry adiabatic lapse rate; that air is absolutely unstable regardless of the amount of moisture it contains. A parcel of air lifted even slightly will immediately be warmer than its surroundings, and, as with a hot air balloon, will be forced to rise.
19210 Conditional instability exists when the temperature lapse rate of the air involved lies between the moist and dry adiabatic rates of cooling. Before the displaced air actually becomes unstable, it must be lifted to a point where it is warmer than the surrounding air. When this point has been reached, the relatively warmer air continues to rise freely until, at some higher altitude, its temperature has cooled to the temperature of the surrounding air. In the instability process, numerous variables tend to modify the air. One of the most important of these variables is the process called entrainment. In this process, air adjacent to the cumulus or mature thunderstorm is drawn into the cloud primarily by strong updrafts within the cloud. The entrained air modifies the temperature of the air within the cloud as the two become mixed.
19211 Neutrally stable air is air with the same temperature, and there is no parcel to rise or descend. For example, the surface area in contact with that air is of the same temperature.
19212 The term convective instability refers to a condition in which the air becomes unstable after lifting. From a physical standpoint, it closely resembles a conditionally unstable air mass, but has the mechanical lifting of thermal activity impacting on the overall characteristics of the air.
Effects of Stable & Unstable Air
19213 The degree of stability of the atmosphere helps to determine the type of clouds formed, if any. For example, if very stable air is forced to ascend a mountain slope, clouds will be layer-like with little vertical development and little or no turbulence. Unstable air, if forced to ascend the slope, would cause considerable vertical development and turbulence in the cumulus-type clouds.
19214 If air is subsiding (sinking), the heat of compression frequently causes an inversion of temperature which increases the stability of the subsiding air. When this occurs, as in winter high pressure systems, a surface inversion formed by radiational cooling is sometimes already present. The subsidence-produced inversion, in this case, will intensify the surface inversion, placing a strong “lid” above smoke and haze. Poor visibility in the lower levels of the atmosphere results, especially near industrial areas. Such conditions frequently persist for days, notably in the Great Basin region of the western United States.
Weather Hazards
19215 There are many weather hazards that you need to consider.
Turbulence
19216 Turbulence is the irregular motion of the atmosphere as indicated by gusts and lulls in the wind. Since turbulence is associated with many different weather situations, knowledge of its causes and its behavior will help a balloon pilot avoid or minimize its effects.
19217 Turbulence can be divided into four categories according to the specific causes:
19218 • Thermal—caused by localized convective currents due to surface heating or unstable lapse rates and cold air moving over warmer ground or water.
19219 • Mechanical—resulting from wind flowing over irregular terrain or obstructions.
19220 • Frontal—resulting from the local lifting of warm air by cold air masses, or the abrupt wind shift (shear) associated with most cold fronts.
19221 • Wind shear—marked gradient in wind speed and/or direction due to general vibrations in the temperature and pressure fields aloft.
19222 Two or more of the above causative factors often work together. In addition, turbulence is produced by man-made phenomena.
Thermal
19223 A thermal is simply the updraft in a small-scale convective current. Convective currents (vertical or horizontal air movements) develop in air, which is heated by contact with a warm surface. This heating from below occurs when either cold air is advected (moved horizontally) over a warmer surface or the ground is strongly heated by solar radiation.
19224 The strength of convective currents depends in part on the extent to which the Earth’s surface has been heated, which depends upon the nature of the surface. Barren surfaces, such as sandy or rocky wasteland and plowed fields, are heated more rapidly than surfaces covered in vegetation. Thus, barren surfaces generally cause stronger convection currents. In comparison, water surfaces are heated more slowly.
19225 When air is very dry, convective currents may be present although convective-type clouds (cumulus) are absent. The general upper limits of the convective currents are often marked by the tops of cumulus clouds, which form in them when the air is moist, or by haze lines. However, turbulence may extend beyond this boundary. Varying types of surfaces, and the resultant thermal conditions, can affect a balloon to a considerable extent.
19226 The balloon pilot caught in a thermal will recognize the condition by an increase in altitude without application of heat from the balloon’s heater. This ascent can be rapid and may exceed the maximum rate of climb limitations in the balloon’s flight manual. Since the air mass is also rising with the balloon, there is no significant pressure against the top of the balloon. Thus, the top cap will not be pushed open (commonly referred to as “floating the top”).
19227 Depending on their size, some thermals may have a rotative motion similar to a small low pressure system. This motion draws the balloon in and forces it to fly in an uncontrolled circle. For balloons caught in a thermal, remember the adage “altitude is your friend.” First, the pilot should insure there is sufficient altitude to clear potential obstacles. Second, maintain the temperature in the balloon appropriate for level flight. Many pilots attempt to descend immediately, but this may put the balloon, as well as the passengers, at risk of an uncontrolled descent with possible injury. Most thermals have a short lift span. In almost all cases, the thermal will “spit” the balloon out the top after a short time, and the pilot may descend and land as necessary.
Mechanical
19228 When the air near the surface of the Earth flows over obstructions, such as irregular terrain, (bluffs, hills, mountains) and buildings, the normal horizontal wind flow is disturbed. As a result, it is transformed into eddies or other irregular air movements. Figure 4-21 shows how the buildings or other obstructions near a launch site or landing field can cause turbulence.
19229
Figure 4-21. Surface obstructions cause eddies and other irregular air movements.
19230 The strength and magnitude of mechanical turbulence depends on:
19231 • The speed of the wind.
19232 • The nature of the obstruction.
19233 • The stability of the air.
19234 • The angle at which the wind moves over the obstacle.
19235 Stability seems to be the most important factor in determining the strength and vertical extent of the mechanical turbulence.
Frontal
Figure 4-21 · page 29Picture of the page from the copy saved here
19236 Frontal turbulence is cause by the lifting of warm air by a frontal surface, leading to instability and/or the mixing or shear between the warm and cold air masses. The vertical currents in the warm air are strongest when the warm air is moist and unstable. The most severe cases of frontal turbulence are generally associated with fast moving cold fronts. In these cases, mixing between the two air masses, as well as the differences in wind speed and/or direction add to the intensity of the turbulence.
Wind Shear
19237 Wind shear is a relatively steep gradient in wind velocity along a given line of direction (either vertical or horizontal) and produces churning motions (eddies) which result in turbulence. The greater the change of wind speed and/or direction in the given direction, the greater the shear and associated turbulence.
19238 Clear-air turbulence (CAT), or sudden severe turbulence that occurs in cloudless regions, is associated with wind shear, particularly between the core of a jet stream and the surrounding air. CAT is not limited to the vicinity of the jet stream and may occur in isolated regions of the atmosphere. For example, the turbulence in a mountain wave can also be classified as CAT because the identifying clouds in the wave do not necessarily have to occur for the turbulence to be present.
19239 Sometimes during a climb or descent, a balloon encounters a narrow zone of wind shear with its accompanying turbulence at the top of a temperature inversion. These inversions occur anywhere from just above the surface to the tropopause.
19240 Strong inversions near the ground are an extreme form of wind shear that adversely affect balloon takeoffs and landings. For example, a pocket of calm, cold air forms in a valley as a result of nighttime cooling, but the warmer air moving over it has not been affected appreciably. Due to the difference between the two bodies of air, a narrow layer of very turbulent air may form. A balloon climbing or descending through this zone will usually encounter considerable turbulence, as well as changes in lift.
Low Level Wind Shear
19241 Wind shear is a sudden, drastic change in windspeed and/or direction over a very small area. Wind shear can subject a balloon to violent updrafts and downdrafts, as well as abrupt changes to the horizontal movement of the balloon. While wind shear can occur at any altitude, low level wind shear is especially hazardous due to the proximity of a balloon to the ground. Directional wind changes of 180° and speed changes of 50 knots or more are associated with low level wind shear. Low level wind shear is commonly associated with passing frontal systems, thunderstorms, and temperature inversions with strong upper level winds (greater than 25 knots).
19242 Wind shear is hazardous to a balloon for several reasons. The rapid changes in wind direction and velocity changes the wind’s relation to the balloon disrupting the normal flight attitude and performance of the balloon.
Obstructions & Wind
19243 As mentioned earlier, obstructions on the ground affect the flow of wind and can be an unseen danger, causing yet another atmospheric hazard for pilots. For example, ground topography and large buildings can break up the flow of the wind and create wind gusts that change rapidly in direction and speed. Obstructions range from manmade structures, such as hangars, to large natural obstructions, such as mountains, bluffs, or canyons. A safe pilot is vigilant when flying in or out of launch or landing sites that have large buildings or natural obstructions located near them.
19244 The intensity of the turbulence associated with ground obstructions depends on the size of the obstacle and the primary velocity of the wind. This can affect the takeoff and landing performance of a balloon, and can present a very serious hazard. During the landing phase of flight, a balloon may “drop in” due to the turbulent air and be too low to clear obstacles during the approach. Disrupted airflow often extends horizontally as much as ten times the height of the object, if the
winds are in the eight to ten knot range. Balloon pilots should be aware of this, and make adjustments accordingly when attempting to launch next to an obstruction, or when landing just past one.
19245 This same condition is even more noticeable when flying in mountainous regions. While the wind flows smoothly up the windward side of the mountain and the upward currents help to carry an aircraft over the peak of the mountain, the wind on the leeward side does not act in a similar manner. As the air flows down the leeward side of the mountain, the air follows the contour of the terrain and is increasingly turbulent. This tends to push an aircraft into the side of a mountain. The stronger the wind, the greater the downward pressure and turbulence become.
19246 Due to the effect terrain has on the wind in valleys or canyons, downdrafts may be severe. Thus, a prudent balloonist is well advised to seek out another balloon pilot with mountain flying experience and get a mountain “checkout” before conducting a flight in or near mountainous terrain.
Mountain Wave
19247 A mountain wave is the wavelike effect, characterized by updrafts and downdrafts, that occurs above and behind a mountain range when rapidly flowing air encounters the mountain range’s steep front. The characteristics of a typical mountain wave are represented in Figure 4-22 which illustrates how air flows with relative smoothness in its lifting component as the wave current moves along the windward side of the mountain. Wind speed gradually increases, reaching a maximum near the summit. On passing the crest, the flow breaks into a much more complicated pattern, with downdrafts predominating.
19441
Rotor turbulence
Breaking wave
WIND
Figure 4-22. Characteristics of a mountain wave
Figure 4-22 · page 31Picture of the page from the copy saved here
19248 An indication of the possible intensities in the mountain wave is reflected in verified records of sustained downdrafts and updrafts in excess of 3,000 feet per minute (fpm). Turbulence in varying degrees can be expected, with particularly severe turbulence in the lower levels. Proceeding downwind 5 to 10 miles from the summit, the airflow begins to ascend as part of a definite wave pattern. Additional waves, generally less intense than the primary wave, may form downwind. This event is much like the series of ripples that form downstream from a rock submerged in a swiftly flowing river. The distance between successive waves (wavelength) usually ranges from 2 to 10 miles, depending on existing wind speed and atmospheric stability, although waves up to 20 miles apart have been reported.
19249 Characteristic cloud forms peculiar to wave action provide the best means of identification. Lenticular clouds, formed by mountain waves, are smooth in contour. [Figure 4-23] These clouds may occur alone or in layers at heights above 20,000 feet MSL, and be quite ragged when the airflow at that level is turbulent. The roll cloud forms at a lower level, generally near the height of the mountain ridge. The cap cloud must always be avoided in flight because of turbulence, concealed mountain peaks, and strong downdrafts on the lee slope. The lenticulars, like the roll and cap clouds, are stationary. They are constantly forming on the windward side and dissipating on the lee side of the mountain wave.
19250
Figure 4-23. Multiple lenticular clouds over Mount Shasta, California.
Rotors
Figure 4-23 · page 32Picture of the page from the copy saved here
19251 Rotors or eddies can also be found embedded in mountain waves. Formation of rotors can also occur as a result of down slope winds. Their formation usually occurs where wind speeds change in a wave or where friction slows the wind near the ground. These rotors are often experienced as gusts or wind shear. Clouds may also form within a rotor.
19252 Research on mountain waves and rotors or eddies continues as these phenomena are quite complex, but there is no doubt that pilots need to be aware of these phenomena and take appropriate precautions. Although mountain wave activity is normally forecast, many local factors may affect the formation of rotors and eddies. When planning a flight, a pilot should take note of the winds and terrain to assess the likelihood of waves and rotors. There may be telltale signs in flight, including disturbances on water or wheat fields and the formation of clouds, provided there is sufficient humidity to allow cloud formation.
Thunderstorms
19253 A thunderstorm is a local storm produced by a cumulonimbus cloud and accompanied by lightning and thunder. Thunderstorms and cumulonimbus clouds contain many of the most severe atmospheric hazards for the balloon pilot. They are almost always accompanied by strong gusty winds, severe turbulence, heavy rain showers, and lightning. These hazards may extend well away from the central core of the thunderstorm mass, sometimes as much as 30 miles or more.
19254 Ceilings and visibility in the precipitation areas under the thunderstorms are normally poor. Because of the heavy precipitation, the ceiling reported is at best an estimate of where the pilot may break out into visual contact with the surface. The weather observer determines the vertical visibility into the precipitation, which may be significantly different from the slant-range of the pilot.
19255 Potentially hazardous turbulence, as well as many other hazards associated with thunderstorms, make a thunderstorm a dangerous weather formation. The safe balloon pilot avoids any conditions that may expose them to potential thunderstorm activity. They exercise discretion and good judgment when potential thunderstorm conditions exist.
Structure of Thunderstorms
19256 It is important to understand the structure of thunderstorms.
Convective Cells
19257 The fundamental structural element of the thunderstorm is the unit of convective circulation known as a convective cell. A mature thunderstorm contains one or more of these cells in different stages of development, each varying in diameter from one to five miles. By radar analysis and measurement of drafts, it has been determined that each cell is generally
independent of surrounding cells in the same storm. Each thunderstorm progresses through a life cycle from 1 to 3 hours, depending upon the number of cells contained and their stage of development. In the initial stage (cumulus), the cloud consists of a single cell. As the development progresses, however, new cells may form as older cells dissipate.
Stages in Thunderstorm Development
19258 The life cycle of each thunderstorm cell consists of three distinct stages:
19259 • Cumulus.
19260 • Mature.
19261 • Dissipating.
Cumulus Stage
19262 Although most cumulus clouds do not become thunderstorms, the initial stage of a thunderstorm is always a cumulus cloud. [Figure 4-24] The chief distinguishing feature of the cumulus or building stage is an updraft that prevails throughout the entire cell. This updraft may vary from a few feet per second to as much as 6,000 fpm (65 knots) in mature cells. As an updraft continues through the vertical extent of the cell, water droplets grow in size and raindrops are formed.
19263
Figure 4-24. Congestive cumulus cloud
Mature Stage
Figure 4-24 · page 33Picture of the page from the copy saved here
19264 The formation of a downdraft and the beginning of surface rain and additional updrafts and downdrafts initiates the mature stage. [Figure 4-25] By this time, the average cell has attained a height of 25,000 feet. As the drops begin to fall, the surrounding air begins a downward motion because of frictional drag. This descending air will be colder that its surroundings and its rate of downward motion is accelerated, forming the downdraft. The downdraft reaches maximum speed a short time after rain begins to fall in the cloud. Downdrafts occur at all levels within the storm, and their speed ranges from a few feet per minute to about 2,500 fpm (25 knots). Significant downdrafts never extend from the top of the cell because moisture is not sufficient in the upper levels for raindrops to form. At these high levels, only ice crystals, snowflakes, and supercooled water are present. Therefore, their rate of fall is insufficient to cause appreciable downdrafts. The mature cell generally extends far above 25,000 feet—in some cases up to 70,000 feet. In the middle levels, around
Figure 4-25 · page 34Picture of the page from the copy saved here
14,000 feet, strong updrafts and downdrafts are adjacent to each other. A shear action exists between these drafts and produces strong and frequent gusts.
19442
Figure 4-25. Mature thunderstorm.
Dissipating or Anvil Stage
19265 Throughout the life span of the mature cell, more and more air aloft is entrained by the falling raindrops. Consequently, the downdraft spreads out to take the place of the weakening updrafts. As this process progresses, the entire lower portion of the cell becomes an area of downdraft. Since updrafts are necessary to produce condensation and release latent heat energy, the entire structure begins to dissipate. [Figure 4-26] The strong winds aloft carry the upper section of the cloud into the familiar anvil form (cumulonimbus cloud). However, the appearance of the anvil does not always indicate that the thunderstorm is dissipating.
19266
Figure 4-26. Dissipating thunderstorm.
Figure 4-26 · page 34Picture of the page from the copy saved here
19267 A significant thunderstorm hazard is the rapid change in wind direction and wind speed immediately prior to storm passage at the surface. These strong winds are the result of the horizontal spreading of the storm’s downdraft current as they approach the surface of the earth. This initial wind surge, as observed at the surface, is known as a first gust. The speed of this first gust may exceed 75 knots and vary 180° in direction from the previously prevailing surface winds. Firstgust speeds average about 15 knots over prevailing velocities, and average an approximately 40° change in the direction of the wind. First gusts usually precede the heavy precipitation, and strong gusts may continue for approximately 5 to 10 minutes with each thunderstorm cell. First gusts are not limited to the area ahead of the storm’s movement. They may be found in all sectors, including the area back of the storm’s movement.
19268 surface variations generally occur. These variations usually occur in a particular sequence characterized by:
19269 • An abrupt fall in pressure as the storm approaches.
19270 • An abrupt rise in pressure associated with rain showers as the storm moves on and the rain ceases.
19271 All thunderstorms are similar in physical makeup, but for purposes of identification they are divided into two general groups: frontal and air mass. This division gives the balloon pilot an indication of the method by which the storms are formed and the distribution of the clouds over the area. The specific nomenclature of these thunderstorms depends upon the manner in which the lifting action occurs.
Frontal Thunderstorms
19272 Thunderstorms may occur within the cloud system of any front: warm, cold, stationary, or occluded. Frontal thunderstorms are caused by the lifting of warm, moist, conditionally unstable air over a frontal surface. Thunderstorms may also occur many miles ahead of a rapidly moving cold front, and are called prefrontal or squall line thunderstorms.
19273 Warm front thunderstorms are caused when warm, moist, conditionally unstable air is forced aloft over a colder, denser shelf of retreating air. Because the frontal surface is shallow, the air is lifted gradually. The lifting condensation level, the level where air becomes saturated when lifted, is normally reached well before the level of free convection (where lifted air is warmer than the environmental air and rises on its own), thus producing stratus clouds. The level of free convection is normally reached in isolated areas along the frontal surface. This is the area where the greatest amount of water vapor is present in the warm air being lifted. Therefore, warm front thunderstorms are generally isolated to scattered in coverage. When the level of free convection is reached, warm front thunderstorms may form. These thunderstorms may prove particularly hazardous, as they are frequently obscured by the surrounding stratiform clouds.
19274 Cold front thunderstorms are caused by the forward motion of a wedge of cold air under a mass of warm, moist, conditionally unstable air (cold front), increasing the possibility for thunderstorms to develop. The slope of a typical cold frontal surface is relatively steep, so the lifting condensation level and the level of free convection are usually near the same altitude. Cold front thunderstorms are typically positioned along the frontal surface in what appears to be a continuous line. These storms are easily recognized, because they are partly visible from the front and rear of the storm line. However, if the slope of the frontal surface is shallow, the lifting action is not sufficient to produce thunderstorms in lines (line squalls). With a shallow front, the thunderstorms form behind the surface front and are widely scattered. Such storms may be concealed by the surrounding cloud layers.
19275 Lines of thunderstorms frequently develop ahead of rapidly moving cold fronts. These are known as prefrontal squall lines, and frequently form parallel to the cold front. Prefrontal squall line thunderstorms are usually more violent than cold front thunderstorms. They are most active between noon and midnight. The cold front cloud system usually weakens during the period of the greatest prefrontal squall line activity because the warm air displaced by the frontal surface has lost its moisture and energy in the prefrontal thunderstorms. In the United States, tornadoes are frequently associated with strong prefrontal squall lines. Pre-frontal squall line thunderstorms are indicated on a surface weather map by an alternate dashdot-dash line (display).
19276 The distribution of stationary front thunderstorms is controlled by the slope of the frontal surface. Steeply sloped stationary fronts tend to have lines of storms, whereas shallow stationary fronts tend to have widely scattered storms.
19277 Occluded front thunderstorms are associated with the two types of occluded fronts (warm front and cold front occlusions) and are usually cold front thunderstorms that have been moved into the area of warm frontal weather by the occlusion process. They are found closer to the low-pressure center and are normally strongest for a distance of 50 to 100 miles north of the peak of the warm sector.
Air Mass Thunderstorms
19278 The two types of air mass thunderstorms are locally convective and orographic. Both types form within air masses, and are randomly distributed throughout the air mass.
19279 Convective thunderstorms are often caused by solar heating of the land, which provides heat to the air, thereby resulting in thermal convection. Relatively cool air flowing over a warmer water surface may also produce sufficient convection to cause thunderstorms. The land-type convective thunderstorms normally form during the afternoon hours, after the Earth has gained maximum heating from the sun. If cool, moist, conditionally unstable air is passing over this land area, heating from below will cause convective currents, thereby resulting in towering cumulus or thunderstorm activity. Dissipation usually occurs during the early evening hours, as the land begins to lose its heat to the atmosphere. Although convective thunderstorms form as individual cells, they may become so numerous over a particular geographical area that continued flight cannot be maintained.
19280 Thunderstorms over the ocean are most common during the night and early morning. They frequently occur offshore when a land breeze is blowing toward the water. The cool land breeze is heated by the warmer water surface, which results in sufficient convection to produce thunderstorms. After sunrise, heating of the land surface reverses the airflow (sea breeze). The thunderstorms then dissipate over the water, but they may re-form over the warmer land surface. As an example, the air mass weather that exists in Florida combines both types of convective thunderstorms. Circulation around a semipermanent high pressure system off the southeastern United States (Bermuda high) carries moist ocean air over the warm land surface of the Florida Peninsula. At night, thunderstorms off the Florida Coast are caused by the warm water of the Gulf Stream heating the surface air, while the upper air is cooling by radiation to space. This heating from below produces thermal convection over the water. When the sun rises, the heat balance necessary to maintain storm formation over the water is destroyed. By day, the storms appear to move inward over the land areas, but actually dissipate off the coast and reform over the hot landmass. The heated land surface sets up an unstable lapse rate over the Peninsula and causes storm development to continue until nocturnal cooling occurs. Usually, convective type storms are randomly distributed and easily recognized.
19281 Orographic thunderstorms will form on the windward side of a mountain if conditionally unstable air is lifted above the level of free convection. The storm activity is usually scattered along the individual peaks of the mountains. Occasionally, however, this activity may form a long unbroken line of storms similar to a squall line. The storms persist as long as the circulation causes upslope motion. From the windward side of the mountains, identification of orographic storms may sometimes be difficult because the storm clouds are obscured by other clouds (usually stratiform). Almost without exception, orographic thunderstorms enshroud mountain peaks or hills.
Minimum Factors
19282 The minimum factors essential to the formation of a thunderstorm are conditionally unstable air with relatively high moisture content and some type of lifting action. Lifting of warm air will not necessarily cause free convection. The air may be lifted to a point where the moisture condenses and clouds form. These cloud layers, however, will be stable if the level of free convection has not been reached by the lifting. Conversely, it is possible for dry heated air to rise convectively without the formation of clouds. In this condition, turbulence might be experienced in perfectly clear weather. Cumulonimbus cloud formations require a combination of conditionally unstable air, some type of lifting actions, and high moisture content. Once a cloud has formed, the latent heat of condensation released by the change of state from vapor to liquid tends to make the air more unstable.
19283 Some type of external lifting action is necessary to bring the warm surface air to the point where it will continue to rise freely (the level of free convection). For example, an air mass may be lifted by thermal convection, terrain, fronts, or convergence.
Thunderstorms
19284 By no means is the information contained here a complete discussion of all the weather information and factors affecting balloon flight. There are many resources available, both through government and private agencies, which may be of value to the pilot in planning a flight. A pilot should take the time to explore the internet, read weather books, and gain a complete understanding of the myriad of weather information and products that are available.
Continue reading ↓ 120 of 167 passages shown