§ 26.39 Newly produced airplanes: Fuel tank flammability
Text changed: 1 of 3 passages.
- Date
- Nov 18, 2026
- Recorded
- Nov 18, 2026
- Passages
- 1 of 3 changed
- Paragraphs
- 1 added or rewritten, 0 removed or rewritten
Read the current text Official source ↗
What changed in the text
Key: [removed: removed words] are struck through; [added: added words] are underlined. Each changed paragraph is labelled in the margin.
(a) Applicability: This section applies to Boeing model airplanes specified in Table 1 of this section, including passenger and cargo versions of each model, when application is made for original certificates of airworthiness or export airworthiness approvals after December 27, 2010.
- Added
[added: Table 1]
Model—Boeing
747 Series
- 8 unchanged paragraphs
Whole text before this change
(a) Applicability: This section applies to Boeing model airplanes specified in Table 1 of this section, including passenger and cargo versions of each model, when application is made for original certificates of airworthiness or export airworthiness approvals after December 27, 2010.
Model—Boeing
747 Series
737 Series
777 Series
767 Series
(b) Any fuel tank meeting all of the criteria stated in paragraphs (b)(1), (b)(2) and (b)(3) of this section must have flammability reduction means (FRM) or ignition mitigation means (IMM) that meet the requirements of 14 CFR 25.981 in effect on December 26, 2008.
(1) The fuel tank is Normally Emptied.
(2) Any portion of the fuel tank is located within the fuselage contour.
(3) The fuel tank exceeds a Fleet Average Flammability Exposure of 7 percent.
(c) All other fuel tanks that exceed an Fleet Average Flammability Exposure of 7 percent must have an IMM that meets 14 CFR 25.981(d) in effect on December 26, 2008, or an FRM that meets all of the requirements of Appendix M to this part, except instead of complying with paragraph M25.1 of that appendix, the Fleet Average Flammability Exposure may not exceed 7 percent.
Whole text after this change
(a) Applicability: This section applies to Boeing model airplanes specified in Table 1 of this section, including passenger and cargo versions of each model, when application is made for original certificates of airworthiness or export airworthiness approvals after December 27, 2010.
Table 1
Model—Boeing
747 Series
737 Series
777 Series
767 Series
(b) Any fuel tank meeting all of the criteria stated in paragraphs (b)(1), (b)(2) and (b)(3) of this section must have flammability reduction means (FRM) or ignition mitigation means (IMM) that meet the requirements of 14 CFR 25.981 in effect on December 26, 2008.
(1) The fuel tank is Normally Emptied.
(2) Any portion of the fuel tank is located within the fuselage contour.
(3) The fuel tank exceeds a Fleet Average Flammability Exposure of 7 percent.
(c) All other fuel tanks that exceed an Fleet Average Flammability Exposure of 7 percent must have an IMM that meets 14 CFR 25.981(d) in effect on December 26, 2008, or an FRM that meets all of the requirements of Appendix M to this part, except instead of complying with paragraph M25.1 of that appendix, the Fleet Average Flammability Exposure may not exceed 7 percent.