§ 25.405 Secondary control system
Text changed: 1 of 1 passage.
- Date
- Nov 18, 2026
- Recorded
- Nov 18, 2026
- Passages
- 1 of 1 changed
- Paragraphs
- 1 added or rewritten, 0 removed or rewritten
Read the current text Official source ↗
What changed in the text
Key: [removed: removed words] are struck through; [added: added words] are underlined. Each changed paragraph is labelled in the margin.
Secondary controls, such as wheel brake, spoiler, and tab controls, must be designed for the maximum forces that a pilot is likely to apply to those controls. The following values may be used:
- Added
[added: Pilot Control Force Limits (Secondary Controls)]
Control | Limit pilot forces
Miscellaneous: |
- 4 unchanged paragraphs
Whole text before this change
Secondary controls, such as wheel brake, spoiler, and tab controls, must be designed for the maximum forces that a pilot is likely to apply to those controls. The following values may be used:
Control | Limit pilot forces
Miscellaneous: |
*Crank, wheel, or lever | ((1 + R) / 3) × 50 lbs., but not less than 50 lbs. nor more than 150 lbs. (R = radius). (Applicable to any angle within 20° of plane of control).
Twist | 133 in.-lbs.
Push-pull | To be chosen by applicant.
*Limited to flap, tab, stabilizer, spoiler, and landing gear operation controls.
Whole text after this change
Secondary controls, such as wheel brake, spoiler, and tab controls, must be designed for the maximum forces that a pilot is likely to apply to those controls. The following values may be used:
Pilot Control Force Limits (Secondary Controls)
Control | Limit pilot forces
Miscellaneous: |
*Crank, wheel, or lever | ((1 + R) / 3) × 50 lbs., but not less than 50 lbs. nor more than 150 lbs. (R = radius). (Applicable to any angle within 20° of plane of control).
Twist | 133 in.-lbs.
Push-pull | To be chosen by applicant.
*Limited to flap, tab, stabilizer, spoiler, and landing gear operation controls.