Radar Vectors
Airworthiness Directive Superseded Issued Oct 31, 1975 AIR-730: International Validation Branch Copy saved Nov 18, 2026

AD 75-23-03 Alexander Schleicher Models Ka2B, Ka6, Ka6B, Ka6BR, Ka6C, Ka6CR, K7, K8, and AS-K13 Gliders

Elevator and Control

This document is no longer current. Superseded by AD 2022-12-07. Check the official source before relying on it.

Official source ↗

Regulatory Text

75-23-03 ALEXANDER SCHLEICHER SEGELFLUGZEUGBAU: Amendment 39- 2414. Applies to Ka2B, Ka6, Ka6B, Ka6BR, Ka6C, Ka6CR, K7, K8, and AS-K13 gliders all serial numbers, certificated in all categories.

Compliance is required as indicated.

To prevent structural failure of the elevator and loss of elevator control accomplish the following:

(a) Within the next 10 hours' time in service after the effective date of this AD, unless already accomplished, remove the elevator from the glider and visually inspect the glue joint between nose rib No. 1 and the nose plywood skin on both elevator halves by probing with a small penknife.

(b) If insufficient glue adhesion is determined in accordance with good aeronautical practices, before further flight, remove elevator rib No. 1 in its entirety, prepare for new glue joint by roughing the surfaces to be glued, reinstall rib No. 1 by regluing, and cover joints between rib No. 1 and nose skin with fabric to protect joint against moisture.This amendment becomes effective November 14, 1975.